linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: Michael Ellerman <michael@ellerman.id.au>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 1/6] powerpc: Make NR_IRQS a CONFIG option
Date: Wed, 14 Oct 2009 12:59:51 -0600	[thread overview]
Message-ID: <fa686aa40910141159l402304e9y22a6b2d7d8d79759@mail.gmail.com> (raw)
In-Reply-To: <a6fc612b826ff12628e62601203d565df00c6436.1255499081.git.michael@ellerman.id.au>

On Tue, Oct 13, 2009 at 11:44 PM, Michael Ellerman
<michael@ellerman.id.au> wrote:
> The irq_desc array consumes quite a lot of space, and for systems
> that don't need or can't have 512 irqs it's just wasted space.
>
> The first 16 are reserved for ISA, so the minimum of 32 is really
> 16 - and no one has asked for more than 512 so leave that as the
> maximum.

Does it really make sense to have this as a user twiddlable value?
Especially when many users just don't have the background to know what
an appropriate value is here and will get it wrong?  I believe your
sparse IRQ patch has a bigger impact anyway on systems where memory is
tight.

g.

>
> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
> ---
> =A0arch/powerpc/Kconfig =A0 =A0 =A0 =A0 =A0 | =A0 10 ++++++++++
> =A0arch/powerpc/include/asm/irq.h | =A0 =A04 ++--
> =A02 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 10a0a54..2230e75 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -56,6 +56,16 @@ config IRQ_PER_CPU
> =A0 =A0 =A0 =A0bool
> =A0 =A0 =A0 =A0default y
>
> +config NR_IRQS
> + =A0 =A0 =A0 int "Number of virtual interrupt numbers"
> + =A0 =A0 =A0 range 32 512
> + =A0 =A0 =A0 default "512"
> + =A0 =A0 =A0 help
> + =A0 =A0 =A0 =A0 This defines the number of virtual interrupt numbers th=
e kernel
> + =A0 =A0 =A0 =A0 can manage. Virtual interrupt numbers are what you see =
in
> + =A0 =A0 =A0 =A0 /proc/interrupts. If you configure your system to have =
too few,
> + =A0 =A0 =A0 =A0 drivers will fail to load or worse - handle with care.
> +
> =A0config STACKTRACE_SUPPORT
> =A0 =A0 =A0 =A0bool
> =A0 =A0 =A0 =A0default y
> diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/ir=
q.h
> index bbcd1aa..b83fcc8 100644
> --- a/arch/powerpc/include/asm/irq.h
> +++ b/arch/powerpc/include/asm/irq.h
> @@ -34,8 +34,8 @@ extern atomic_t ppc_n_lost_interrupts;
> =A0*/
> =A0#define NO_IRQ_IGNORE =A0 =A0 =A0 =A0 =A0((unsigned int)-1)
>
> -/* Total number of virq in the platform (make it a CONFIG_* option ? */
> -#define NR_IRQS =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0512
> +/* Total number of virq in the platform */
> +#define NR_IRQS =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0CONFIG_NR_IRQS
>
> =A0/* Number of irqs reserved for the legacy controller */
> =A0#define NUM_ISA_INTERRUPTS =A0 =A0 16
> --
> 1.6.2.1
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>



--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

  parent reply	other threads:[~2009-10-14 19:00 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-14  5:44 [PATCH 1/6] powerpc: Make NR_IRQS a CONFIG option Michael Ellerman
2009-10-14  5:44 ` [PATCH 2/6] powerpc/pseries: Use irq_has_action() in eeh_disable_irq() Michael Ellerman
2009-10-14 18:33   ` Grant Likely
2009-10-14  5:44 ` [PATCH 3/6] powerpc: Remove get_irq_desc() Michael Ellerman
2009-10-14 19:02   ` Grant Likely
2009-10-14  5:44 ` [PATCH 4/6] powerpc: Make virq_debug_show() cope with sparse irq_descs Michael Ellerman
2009-10-14 18:34   ` Grant Likely
2009-10-14  5:45 ` [PATCH 5/6] powerpc: Rearrange and fix show_interrupts() for " Michael Ellerman
2009-10-14 18:37   ` Grant Likely
2009-10-14  5:45 ` [PATCH 6/6] powerpc: Enable sparse irq_descs on powerpc Michael Ellerman
2009-10-14 18:44   ` Grant Likely
2009-10-14 23:51     ` Michael Ellerman
2009-10-15  0:33       ` Grant Likely
2009-10-14 18:59 ` Grant Likely [this message]
2009-10-14 23:47   ` [PATCH 1/6] powerpc: Make NR_IRQS a CONFIG option Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fa686aa40910141159l402304e9y22a6b2d7d8d79759@mail.gmail.com \
    --to=grant.likely@secretlab.ca \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=michael@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).