linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@ozlabs.org, wd@denx.de, dzu@denx.de,
	Piotr Ziecik <kosmo@semihalf.com>
Subject: Re: [PATCH 1/8 v2] powerpc/mpc5121: Add machine restart support
Date: Wed, 27 Jan 2010 08:46:54 -0700	[thread overview]
Message-ID: <fa686aa41001270746r3355ad62v126222ba10b7f6b0@mail.gmail.com> (raw)
In-Reply-To: <1264594052-20317-2-git-send-email-agust@denx.de>

On Wed, Jan 27, 2010 at 5:07 AM, Anatolij Gustschin <agust@denx.de> wrote:
> Add reset module registers representation and
> machine restart callback for mpc5121 platform.

one comment below.

>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
>
> Changes since v1:
> =A0- use 'struct mpc512x_reset_module *' type for 'reset_module_base'
> =A0- remove empty line
> =A0- remove leftover colon and use pr_err() instead of printk.
>
> =A0arch/powerpc/include/asm/mpc5xxx.h =A0 =A0 =A0 =A0 =A0 =A0| =A0 14 +++=
++++++-
> =A0arch/powerpc/platforms/512x/mpc5121_ads.c =A0 =A0 | =A0 =A01 +
> =A0arch/powerpc/platforms/512x/mpc5121_generic.c | =A0 =A01 +
> =A0arch/powerpc/platforms/512x/mpc512x.h =A0 =A0 =A0 =A0 | =A0 =A01 +
> =A0arch/powerpc/platforms/512x/mpc512x_shared.c =A0| =A0 34 +++++++++++++=
++++++++++++
> =A05 files changed, 50 insertions(+), 1 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/as=
m/mpc5xxx.h
> index 5ce9c5f..0004986 100644
> --- a/arch/powerpc/include/asm/mpc5xxx.h
> +++ b/arch/powerpc/include/asm/mpc5xxx.h
> @@ -18,5 +18,17 @@
>
> =A0extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *nod=
e);
>
> -#endif /* __ASM_POWERPC_MPC5xxx_H__ */
> +/* MPC512x Reset module registers */
> +struct mpc512x_reset_module {
> + =A0 =A0 =A0 u32 =A0 =A0 rcwlr; =A0/* Reset Configuration Word Low Regis=
ter */
> + =A0 =A0 =A0 u32 =A0 =A0 rcwhr; =A0/* Reset Configuration Word High Regi=
ster */
> + =A0 =A0 =A0 u32 =A0 =A0 reserved1;
> + =A0 =A0 =A0 u32 =A0 =A0 reserved2;
> + =A0 =A0 =A0 u32 =A0 =A0 rsr; =A0 =A0/* Reset Status Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rmr; =A0 =A0/* Reset Mode Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rpr; =A0 =A0/* Reset Protection Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rcr; =A0 =A0/* Reset Control Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rcer; =A0 /* Reset Control Enable Register */
> +};
>
> +#endif /* __ASM_POWERPC_MPC5xxx_H__ */
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/pla=
tforms/512x/mpc5121_ads.c
> index 441abc4..2f40404 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -68,4 +68,5 @@ define_machine(mpc5121_ads) {
> =A0 =A0 =A0 =A0.init_IRQ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =3D mpc5121_ads_init=
_IRQ,
> =A0 =A0 =A0 =A0.get_irq =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=3D ipic_get_irq,
> =A0 =A0 =A0 =A0.calibrate_decr =A0 =A0 =A0 =A0 =3D generic_calibrate_decr=
,
> + =A0 =A0 =A0 .restart =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=3D mpc512x_restart=
,
> =A0};
> diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc=
/platforms/512x/mpc5121_generic.c
> index 2479de9..de4c3f7 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_generic.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
> @@ -55,4 +55,5 @@ define_machine(mpc5121_generic) {
> =A0 =A0 =A0 =A0.init_IRQ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =3D mpc512x_init_IRQ=
,
> =A0 =A0 =A0 =A0.get_irq =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=3D ipic_get_irq,
> =A0 =A0 =A0 =A0.calibrate_decr =A0 =A0 =A0 =A0 =3D generic_calibrate_decr=
,
> + =A0 =A0 =A0 .restart =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=3D mpc512x_restart=
,
> =A0};
> diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platfor=
ms/512x/mpc512x.h
> index 22a5352..c38875c 100644
> --- a/arch/powerpc/platforms/512x/mpc512x.h
> +++ b/arch/powerpc/platforms/512x/mpc512x.h
> @@ -12,5 +12,6 @@
> =A0#ifndef __MPC512X_H__
> =A0#define __MPC512X_H__
> =A0extern void __init mpc512x_init_IRQ(void);
> +extern void mpc512x_restart(char *cmd);
> =A0void __init mpc512x_declare_of_platform_devices(void);
> =A0#endif =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* __MPC512X_H_=
_ */
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/=
platforms/512x/mpc512x_shared.c
> index 434d683..4745028 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -21,9 +21,43 @@
> =A0#include <asm/ipic.h>
> =A0#include <asm/prom.h>
> =A0#include <asm/time.h>
> +#include <asm/mpc5xxx.h>
>
> =A0#include "mpc512x.h"
>
> +static struct mpc512x_reset_module __iomem *reset_module_base;
> +
> +static int __init mpc512x_restart_init(void)
> +{
> + =A0 =A0 =A0 struct device_node *np;
> +
> + =A0 =A0 =A0 np =3D of_find_compatible_node(NULL, NULL, "fsl,mpc5121-res=
et");
> + =A0 =A0 =A0 if (!np)
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -1;
> +
> + =A0 =A0 =A0 reset_module_base =3D of_iomap(np, 0);
> + =A0 =A0 =A0 of_node_put(np);
> +
> + =A0 =A0 =A0 return 0;
> +}
> +arch_initcall(mpc512x_restart_init);

Avoid using arch_initcalls for this sort of thing.  Call it explicitly
from your platform code.  Doing an arch_initcall means that platform
code cannot override it, and that on a multiplatform kernel it will
get called on non-5121 platforms.

g.


--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

  reply	other threads:[~2010-01-27 15:47 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-27 12:07 [PATCH 0/8] Update support for MPC512x Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 1/8 v2] powerpc/mpc5121: Add machine restart support Anatolij Gustschin
2010-01-27 15:46   ` Grant Likely [this message]
2010-01-27 12:07 ` [PATCH 2/8 v2] rtc: Add MPC5121 Real time clock driver Anatolij Gustschin
2010-01-27 15:58   ` Grant Likely
2010-01-27 12:07 ` [PATCH 3/8 v2] mtd: Add MPC5121 NAND Flash Controller driver Anatolij Gustschin
2010-01-27 16:43   ` Grant Likely
2010-01-27 20:24     ` Wolfgang Denk
2010-01-27 12:07 ` [PATCH 4/8 v2] dma: Add MPC512x DMA driver Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 5/8 v2] powerpc/mpc5121: add USB host support Anatolij Gustschin
2010-01-27 12:36   ` Jan Andersson
2010-01-27 15:45     ` Anatolij Gustschin
2010-01-27 16:54   ` Grant Likely
2010-01-27 12:07 ` [PATCH 6/8 v2] powerpc/mpc5121: shared DIU framebuffer support Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 7/8 v2] powerpc/mpc5121: update mpc5121ads DTS Anatolij Gustschin
2010-01-27 12:07 ` [PATCH 8/8 v2] powerpc/mpc5121: Add default config for MPC5121 Anatolij Gustschin
2010-01-27 14:23 ` [PATCH 0/8] Update support for MPC512x Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fa686aa41001270746r3355ad62v126222ba10b7f6b0@mail.gmail.com \
    --to=grant.likely@secretlab.ca \
    --cc=agust@denx.de \
    --cc=dzu@denx.de \
    --cc=kosmo@semihalf.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).