linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Herve Codina <herve.codina@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 3/4] net: wan: fsl_qmc_hdlc: Add runtime timeslots changes support
Date: Wed, 24 Jan 2024 10:10:46 +0000	[thread overview]
Message-ID: <fc421c38-66b7-4d4e-abfa-051eccbf793c@linux.dev> (raw)
In-Reply-To: <20240123164912.249540-4-herve.codina@bootlin.com>

On 23/01/2024 16:49, Herve Codina wrote:
> QMC channels support runtime timeslots changes but nothing is done at
> the QMC HDLC driver to handle these changes.
> 
> Use existing IFACE ioctl in order to configure the timeslots to use.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Acked-by: Jakub Kicinski <kuba@kernel.org>
> ---
>   drivers/net/wan/fsl_qmc_hdlc.c | 169 ++++++++++++++++++++++++++++++++-
>   1 file changed, 168 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wan/fsl_qmc_hdlc.c b/drivers/net/wan/fsl_qmc_hdlc.c
> index 31b637ec8390..82019cd96365 100644
> --- a/drivers/net/wan/fsl_qmc_hdlc.c
> +++ b/drivers/net/wan/fsl_qmc_hdlc.c
> @@ -32,6 +32,7 @@ struct qmc_hdlc {
>   	struct qmc_hdlc_desc tx_descs[8];
>   	unsigned int tx_out;
>   	struct qmc_hdlc_desc rx_descs[4];
> +	u32 slot_map;
>   };
>   
>   static inline struct qmc_hdlc *netdev_to_qmc_hdlc(struct net_device *netdev)
> @@ -202,6 +203,162 @@ static netdev_tx_t qmc_hdlc_xmit(struct sk_buff *skb, struct net_device *netdev)
>   	return NETDEV_TX_OK;
>   }
>   
> +static int qmc_hdlc_xlate_slot_map(struct qmc_hdlc *qmc_hdlc,
> +				   u32 slot_map, struct qmc_chan_ts_info *ts_info)
> +{
> +	u64 ts_mask_avail;
> +	unsigned int bit;
> +	unsigned int i;
> +	u64 ts_mask;
> +	u64 map;
> +
> +	/* Tx and Rx masks must be identical */
> +	if (ts_info->rx_ts_mask_avail != ts_info->tx_ts_mask_avail) {
> +		dev_err(qmc_hdlc->dev, "tx and rx available timeslots mismatch (0x%llx, 0x%llx)\n",
> +			ts_info->rx_ts_mask_avail, ts_info->tx_ts_mask_avail);
> +		return -EINVAL;
> +	}
> +
> +	ts_mask_avail = ts_info->rx_ts_mask_avail;
> +	ts_mask = 0;
> +	map = slot_map;
> +	bit = 0;
> +	for (i = 0; i < 64; i++) {
> +		if (ts_mask_avail & BIT_ULL(i)) {
> +			if (map & BIT_ULL(bit))
> +				ts_mask |= BIT_ULL(i);
> +			bit++;
> +		}
> +	}
> +
> +	if (hweight64(ts_mask) != hweight64(map)) {
> +		dev_err(qmc_hdlc->dev, "Cannot translate timeslots 0x%llx -> (0x%llx,0x%llx)\n",
> +			map, ts_mask_avail, ts_mask);
> +		return -EINVAL;
> +	}
> +
> +	ts_info->tx_ts_mask = ts_mask;
> +	ts_info->rx_ts_mask = ts_mask;
> +	return 0;
> +}
> +
> +static int qmc_hdlc_xlate_ts_info(struct qmc_hdlc *qmc_hdlc,
> +				  const struct qmc_chan_ts_info *ts_info, u32 *slot_map)
> +{
> +	u64 ts_mask_avail;
> +	unsigned int bit;
> +	unsigned int i;
> +	u64 ts_mask;
> +	u64 map;
> +

Starting from here ...

> +	/* Tx and Rx masks must be identical */
> +	if (ts_info->rx_ts_mask_avail != ts_info->tx_ts_mask_avail) {
> +		dev_err(qmc_hdlc->dev, "tx and rx available timeslots mismatch (0x%llx, 0x%llx)\n",
> +			ts_info->rx_ts_mask_avail, ts_info->tx_ts_mask_avail);
> +		return -EINVAL;
> +	}
> +	if (ts_info->rx_ts_mask != ts_info->tx_ts_mask) {
> +		dev_err(qmc_hdlc->dev, "tx and rx timeslots mismatch (0x%llx, 0x%llx)\n",
> +			ts_info->rx_ts_mask, ts_info->tx_ts_mask);
> +		return -EINVAL;
> +	}
> +
> +	ts_mask_avail = ts_info->rx_ts_mask_avail;
> +	ts_mask = ts_info->rx_ts_mask;
> +	map = 0;
> +	bit = 0;
> +	for (i = 0; i < 64; i++) {
> +		if (ts_mask_avail & BIT_ULL(i)) {
> +			if (ts_mask & BIT_ULL(i))
> +				map |= BIT_ULL(bit);
> +			bit++;
> +		}
> +	}
> +
> +	if (hweight64(ts_mask) != hweight64(map)) {
> +		dev_err(qmc_hdlc->dev, "Cannot translate timeslots (0x%llx,0x%llx) -> 0x%llx\n",
> +			ts_mask_avail, ts_mask, map);
> +		return -EINVAL;
> +	}
> +

till here the block looks like copy of the block from previous function.
It worth to make a separate function for it, I think.

> +	if (map >= BIT_ULL(32)) {
> +		dev_err(qmc_hdlc->dev, "Slot map out of 32bit (0x%llx,0x%llx) -> 0x%llx\n",
> +			ts_mask_avail, ts_mask, map);
> +		return -EINVAL;
> +	}
> +
> +	*slot_map = map;
> +	return 0;
> +}
> +
> +static int qmc_hdlc_set_iface(struct qmc_hdlc *qmc_hdlc, int if_iface, const te1_settings *te1)
> +{
> +	struct qmc_chan_ts_info ts_info;
> +	int ret;
> +
> +	ret = qmc_chan_get_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> +	if (ret) {
> +		dev_err(qmc_hdlc->dev, "get QMC channel ts info failed %d\n", ret);
> +		return ret;
> +	}
> +	ret = qmc_hdlc_xlate_slot_map(qmc_hdlc, te1->slot_map, &ts_info);
> +	if (ret)
> +		return ret;
> +
> +	ret = qmc_chan_set_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> +	if (ret) {
> +		dev_err(qmc_hdlc->dev, "set QMC channel ts info failed %d\n", ret);
> +		return ret;
> +	}
> +
> +	qmc_hdlc->slot_map = te1->slot_map;
> +
> +	return 0;
> +}
> +
> +static int qmc_hdlc_ioctl(struct net_device *netdev, struct if_settings *ifs)
> +{
> +	struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev);
> +	te1_settings te1;
> +
> +	switch (ifs->type) {
> +	case IF_GET_IFACE:
> +		ifs->type = IF_IFACE_E1;
> +		if (ifs->size < sizeof(te1)) {
> +			if (!ifs->size)
> +				return 0; /* only type requested */
> +
> +			ifs->size = sizeof(te1); /* data size wanted */
> +			return -ENOBUFS;
> +		}
> +
> +		memset(&te1, 0, sizeof(te1));
> +
> +		/* Update slot_map */
> +		te1.slot_map = qmc_hdlc->slot_map;
> +
> +		if (copy_to_user(ifs->ifs_ifsu.te1, &te1, sizeof(te1)))
> +			return -EFAULT;
> +		return 0;
> +
> +	case IF_IFACE_E1:
> +	case IF_IFACE_T1:
> +		if (!capable(CAP_NET_ADMIN))
> +			return -EPERM;
> +
> +		if (netdev->flags & IFF_UP)
> +			return -EBUSY;
> +
> +		if (copy_from_user(&te1, ifs->ifs_ifsu.te1, sizeof(te1)))
> +			return -EFAULT;
> +
> +		return qmc_hdlc_set_iface(qmc_hdlc, ifs->type, &te1);
> +
> +	default:
> +		return hdlc_ioctl(netdev, ifs);
> +	}
> +}
> +
>   static int qmc_hdlc_open(struct net_device *netdev)
>   {
>   	struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev);
> @@ -328,13 +485,14 @@ static const struct net_device_ops qmc_hdlc_netdev_ops = {
>   	.ndo_open       = qmc_hdlc_open,
>   	.ndo_stop       = qmc_hdlc_close,
>   	.ndo_start_xmit = hdlc_start_xmit,
> -	.ndo_siocwandev	= hdlc_ioctl,
> +	.ndo_siocwandev = qmc_hdlc_ioctl,
>   };
>   
>   static int qmc_hdlc_probe(struct platform_device *pdev)
>   {
>   	struct device_node *np = pdev->dev.of_node;
>   	struct qmc_hdlc *qmc_hdlc;
> +	struct qmc_chan_ts_info ts_info;
>   	struct qmc_chan_info info;
>   	hdlc_device *hdlc;
>   	int ret;
> @@ -364,6 +522,15 @@ static int qmc_hdlc_probe(struct platform_device *pdev)
>   		return -EINVAL;
>   	}
>   
> +	ret = qmc_chan_get_ts_info(qmc_hdlc->qmc_chan, &ts_info);
> +	if (ret) {
> +		dev_err(qmc_hdlc->dev, "get QMC channel ts info failed %d\n", ret);
> +		return ret;
> +	}
> +	ret = qmc_hdlc_xlate_ts_info(qmc_hdlc, &ts_info, &qmc_hdlc->slot_map);
> +	if (ret)
> +		return ret;
> +
>   	qmc_hdlc->netdev = alloc_hdlcdev(qmc_hdlc);
>   	if (!qmc_hdlc->netdev) {
>   		dev_err(qmc_hdlc->dev, "failed to alloc hdlc dev\n");


  reply	other threads:[~2024-01-25  0:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-23 16:49 [PATCH 0/4] Add support for QMC HDLC Herve Codina
2024-01-23 16:49 ` [PATCH 1/4] net: wan: " Herve Codina
2024-01-24 10:03   ` Vadim Fedorenko
2024-01-24 14:39     ` Herve Codina
2024-01-23 16:49 ` [PATCH 2/4] MAINTAINERS: Add the Freescale QMC HDLC driver entry Herve Codina
2024-01-23 16:49 ` [PATCH 3/4] net: wan: fsl_qmc_hdlc: Add runtime timeslots changes support Herve Codina
2024-01-24 10:10   ` Vadim Fedorenko [this message]
2024-01-24 15:26     ` Herve Codina
2024-01-24 16:19       ` Vadim Fedorenko
2024-01-23 16:49 ` [PATCH 4/4] net: wan: fsl_qmc_hdlc: Add framer support Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fc421c38-66b7-4d4e-abfa-051eccbf793c@linux.dev \
    --to=vadim.fedorenko@linux.dev \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=herve.codina@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).