From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: From: diekema@bucks.si.com (diekema_jon) Subject: Getting the image section of the ELF file to load w/ VxWorks boot ROM To: linuxppc-embedded@lists.linuxppc.org, bkuschak@yaoo.com, jim.chapman@iname.com, frank@mitre.org Date: Tue, 2 May 2000 13:24:21 -0400 (EDT) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I am having trouble loading the image section of the elf file (contains the gzip compressed Linux kernel) with the VxWorks boot ROM or the EST VisionICE on the EST SBC8260 board. Both of these options appear to ignore this section. This problem was discussed on the linuxppc-embedded mailing list on 11/2[2-3]/99. A few approaches were put forth, but not all the details were included. Does someone have a recipe on how to solve this problem? CPU: EST Corp. est8260 -- MPC8260 PowerQUICC II SBC Version: 5.4 BSP version: 1.2/3 I have managed to use ".gzimage" instead of "image" as the section name and have changed the section flags, but I don't think this is enough. bucks 2166} powerpc-linux-objdump -h zImage zImage: file format elf32-powerpc Sections: Idx Name Size VMA LMA File off Algn 0 .text 00004494 00400000 00400000 00010000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .rodata 00000470 004044a0 004044a0 000144a0 2**4 CONTENTS, ALLOC, LOAD, READONLY, DATA 2 .data 0000030c 00405000 00405000 00015000 2**2 CONTENTS, ALLOC, LOAD, DATA 3 .data.init 00000000 00406000 00406000 00016000 2**0 CONTENTS 4 .bss 0000526c 00406000 00406000 00016000 2**2 ALLOC 5 .gzimage 0006fd80 00000000 00000000 00020000 2**0 CONTENTS, ALLOC, LOAD, READONLY, DATA ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/