Were to start? With MPC8272 and embedded Linux.

Were to start? With MPC8272 and embedded Linux.

[Channy Tremblay]

[-- Attachment #1: Type: text/plain, Size: 365 bytes --]

Hi list!

First post for me.

We're starting a project with an MPC8272 that will eventually be on a custom
board we are building.

Here is a list of things I have:

- EmbeddedPlanet with MPC8272 but no BSP (do I need one?)
- VisionProbe II with VisionClick

I am planning on using DENX and U-Boot.

Can I put a Linux image with the VisionProbe II?

Thanks,

Channy

[-- Attachment #2: Type: text/html, Size: 441 bytes --]

Re: Were to start? With MPC8272 and embedded Linux.

[Detlev Zundel]

Hi Channy,

> We're starting a project with an MPC8272 that will eventually be on a custom
> board we are building. 
>
> Here is a list of things I have:
>
> - EmbeddedPlanet with MPC8272 but no BSP (do I need one?)

You need a kernel that supports your specific board, yes.  According
to the Embedded Planet web page, there should be a 2.6.10 BSP
available.  This will be based on arch/ppc being dead in less than
twelve months, so for the long term you should start looking for
support for your board in recent kernels, i.e. arch/powerpc.

> - VisionProbe II with VisionClick
>
> I am planning on using DENX and U-Boot.

Congratulations.  We will be perfectly happy helping you on a
professional basis, but maybe you only want to use our free toolchain
ELDK, though :)

> Can I put a Linux image with the VisionProbe II?

Put where?  In RAM, in flash?  I would think that any self-respecting
JTAG debugger should be capable of doing this, but I only know the
BDI2000.

Cheers
  Detlev

-- 
In God we trust.  All others we monitor
                       -- NSA motto
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de