* Re: XFree86 3.3.5
1999-09-20 19:24 ` XFree86 3.3.5 Tom Rini
@ 1999-09-20 22:21 ` Tom Rini
1999-09-24 3:35 ` Neil Jolly
` (2 subsequent siblings)
3 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 1999-09-20 22:21 UTC (permalink / raw)
To: linuxppc-user, yellowdog-general, linuxppc-dev, mklinux-setup
On Mon, 20 Sep 1999, Tom Rini wrote:
> I'd like to announce some test RPMS for of XFree86-3.3.5 that will work
> under LinuxPPC 1999, YDL CS 1.x, and MkLinux pre-R1. These RPMS include
> the following:
Just to follow up myself, it's been tested and working on matroxfb, offb
and aty128fb. If you have problems/working configs, please let me know
privatly.
---
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: XFree86 3.3.5
1999-09-20 19:24 ` XFree86 3.3.5 Tom Rini
1999-09-20 22:21 ` Tom Rini
@ 1999-09-24 3:35 ` Neil Jolly
1999-09-25 20:57 ` XFree86-3.3.5-1.6.0b Tom Rini
1999-10-07 16:45 ` XML tool for Linuxppc?? Scott Janis
3 siblings, 0 replies; 10+ messages in thread
From: Neil Jolly @ 1999-09-24 3:35 UTC (permalink / raw)
To: yellowdog-general; +Cc: linuxppc-user, linuxppc-dev, mklinux-setup
Tom Rini wrote:
> I'd like to announce some test RPMS for of XFree86-3.3.5 that will work
> under LinuxPPC 1999, YDL CS 1.x, and MkLinux pre-R1. These RPMS include
> the following:
>
> Anything that's been fixed in 3.3.5 over previous versions
> USB keymap problems (Backspace/delete)
> USB mouse stuff cleanup (mouseconfig sets BusMouse or IMPS/2)
> Cleaned up adb keymaps/keycodes/etc (Kostas Gewrgiou <gewrgiou@imbc.gr>)
> Updated Xautoconfig to take advantage of said fixes
> Updated Xconfigurator to take advantage of said fixes
> JDK fixes for XF68_FBDev
>
> Note, with the JDK fixes there is a 99% chance you will need to
> reconfigure X (old "Depth 32" is now 24, 16 is now 15 or 16, depending on
> weather it's really 15bit or 16bit.). If you have any problems with this
> release, please make sure you reconfigured your /etc/X11/XF86Config file
> with one of the provided tools. The old ones will not work properly.
>
> It's all available from ftp://devel.linuxppc.org/users/trini/XFree86-3.3.5
> For Xautoconfig, Xconfigurator and mouseconfig there are versions for
> uusbd (2.2.6) and normal USB stacks (2.2.10 from Paul M's site, 2.3.x,
> samba's kernel tree, etc).
>
> This fixes a good number of little bugs with USB (backspace in NS), and
> makes things a bit cleaner (you can configure USB for the new kernels),
> unless you're happy with your current setup, updating is sugjested, as
> there are many security fixes from 3.3.3.1 or 3.3.4 to 3.3.5.
>
> ---
> Tom Rini (TR1265)
> http://gate.crashing.org/~trini/
I installed Xfree86-3.3.5, and the configuration tools, ran Xconfigurator,
and rebooted. After much messing with my rc.local script (my fault it turns
out)for a while I was able to get back to a command line, and test X. It
turns oput I can only startx in 8 bit color or I get either Failed with
signal 11 or no valid modes errors. I noticed In the announcment message that
the X server will no longer run in 32 bit, but I am trying 16 bit and 24 bit
as suggested, but with no success. Any suggestions would be greatly
apprecaited as 8 bit looks gross with WindowMaker.
Thanks all!
--
Neil Jolly
(with Yoda-like voice)
"Confrontation leads to anger... Anger leads to fear... Fear leads
to using Windows NT in mission-critical combat systems... And this is
how the ancients fell...
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread
* XFree86-3.3.5-1.6.0b
1999-09-20 19:24 ` XFree86 3.3.5 Tom Rini
1999-09-20 22:21 ` Tom Rini
1999-09-24 3:35 ` Neil Jolly
@ 1999-09-25 20:57 ` Tom Rini
1999-09-26 4:49 ` XFree86-3.3.5-1.6.0b Neil Jolly
1999-09-26 20:21 ` XFree86-3.3.5-1.6.0b minyard
1999-10-07 16:45 ` XML tool for Linuxppc?? Scott Janis
3 siblings, 2 replies; 10+ messages in thread
From: Tom Rini @ 1999-09-25 20:57 UTC (permalink / raw)
To: linuxppc-user, yellowdog-general, linuxppc-dev, mklinux-setup
Hello again all.
I've uploaded XFree86-3.3.5-1.6.0b rpms to
ftp://devel.linuxppc.org/users/trini/XFree86-3.3.5
If you installed 3.3.5-1.6.0a, and use FBDev, you only need to update that
particular RPM. If you use Xpmac, nothing should have changed. This
should fix most of the invalid depth/etc problems when trying to do >16.
Compiling w/ egcs 1.1.2-12f did not fix at least the main accel bug
(crash), so this is built vs 2.95.x as well. More feedback/etc is
welcome.
---
Tom Rini (TR1265)
http://gate.crashing.org/~trini/
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: XFree86-3.3.5-1.6.0b
1999-09-25 20:57 ` XFree86-3.3.5-1.6.0b Tom Rini
@ 1999-09-26 4:49 ` Neil Jolly
1999-09-26 20:21 ` XFree86-3.3.5-1.6.0b minyard
1 sibling, 0 replies; 10+ messages in thread
From: Neil Jolly @ 1999-09-26 4:49 UTC (permalink / raw)
To: yellowdog-general; +Cc: linuxppc-user, linuxppc-dev, mklinux-setup
Tom Rini wrote:
> Hello again all.
>
> I've uploaded XFree86-3.3.5-1.6.0b rpms to
> ftp://devel.linuxppc.org/users/trini/XFree86-3.3.5
> If you installed 3.3.5-1.6.0a, and use FBDev, you only need to update that
> particular RPM. If you use Xpmac, nothing should have changed. This
Tom: I installed XFree86-FBDev-3.3.5-1.6.0b only as directed, ran
Xconfigurator, and configured 8 bit, 16 bit, and 24 bit. I checked XF86Config
and it was configured for 8 bit, 15 bit, and 24 bit depths. Testing worked
fine in 8 bit, starting X with startx -- -bpp 16 worked ( wasn't sure if I
should use 15 or 16), and startx -- -bpp 24 also worked, but was quite
distorted. Sort of like looking through a kaliedoscope with 4 quadrants -
kind of reminded me of the 70s ;-). Running Xconfigurator & stting up only a
16 bit mode, or only a 24 bit mode would cause X to fail with a default 8 bit
mode not configured (more or less) message. I've gone back to the first rpm
now, but Ill try anything else you can suggest.
--
Neil Jolly
(with Yoda-like voice)
"Confrontation leads to anger... Anger leads to fear... Fear leads
to using Windows NT in mission-critical combat systems... And this is
how the ancients fell...
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: XFree86-3.3.5-1.6.0b
1999-09-25 20:57 ` XFree86-3.3.5-1.6.0b Tom Rini
1999-09-26 4:49 ` XFree86-3.3.5-1.6.0b Neil Jolly
@ 1999-09-26 20:21 ` minyard
1999-09-27 7:05 ` XFree86-3.3.5-1.6.0b Geert Uytterhoeven
1 sibling, 1 reply; 10+ messages in thread
From: minyard @ 1999-09-26 20:21 UTC (permalink / raw)
To: Tom Rini; +Cc: linuxppc-user, yellowdog-general, linuxppc-dev, mklinux-setup
It's not working on my Lombard in 24-bit mode. 15-bit mode works
fine. Specifically, the server says:
No valid modes found
at startup when 24bpp is specified. It doesn't say why it is not
valid, it just doesn't work. Since it works in 15bpp mode, that seems
rather odd.
Also, my font server stopped working. It would lock the machine up at
startup. Actually, the machine wasn't locked up, but it wouldn't
finish booting since xfs didn't "daemonize" properly, it seems. I had
to remove it from the rc directories.
Also, starting the screen saver causes the following:
Fatal server error:
fbdevUpdateColormap: FBIOPUTCMAP failed (Function not implemented)
That would be nice to have fixed. This did the same thing for 3.3.3.
Tom Rini <trini@kernel.crashing.org> writes:
> Hello again all.
>
> I've uploaded XFree86-3.3.5-1.6.0b rpms to
> ftp://devel.linuxppc.org/users/trini/XFree86-3.3.5
> If you installed 3.3.5-1.6.0a, and use FBDev, you only need to update that
> particular RPM. If you use Xpmac, nothing should have changed. This
> should fix most of the invalid depth/etc problems when trying to do >16.
>
> Compiling w/ egcs 1.1.2-12f did not fix at least the main accel bug
> (crash), so this is built vs 2.95.x as well. More feedback/etc is
> welcome.
>
> ---
> Tom Rini (TR1265)
> http://gate.crashing.org/~trini/
>
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: XFree86-3.3.5-1.6.0b
1999-09-26 20:21 ` XFree86-3.3.5-1.6.0b minyard
@ 1999-09-27 7:05 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 1999-09-27 7:05 UTC (permalink / raw)
To: minyard
Cc: Tom Rini, linuxppc-user, yellowdog-general, linuxppc-dev,
mklinux-setup
On 26 Sep 1999 minyard@acm.org wrote:
> It's not working on my Lombard in 24-bit mode. 15-bit mode works
> fine. Specifically, the server says:
>
> No valid modes found
>
> at startup when 24bpp is specified. It doesn't say why it is not
> valid, it just doesn't work. Since it works in 15bpp mode, that seems
> rather odd.
>
> Also, starting the screen saver causes the following:
>
> Fatal server error:
> fbdevUpdateColormap: FBIOPUTCMAP failed (Function not implemented)
>
> That would be nice to have fixed. This did the same thing for 3.3.3.
You need to use a frame buffer device that's specific for your hardware, not
just offb.
Greetings,
Geert
--
Geert Uytterhoeven ----------------- Sony Suprastructure Center Europe (SUPC-E)
Geert.Uytterhoeven@sonycom.com ------------------- Sint Stevens Woluwestraat 55
Phone +32-2-7248648 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread
* XML tool for Linuxppc??
1999-09-20 19:24 ` XFree86 3.3.5 Tom Rini
` (2 preceding siblings ...)
1999-09-25 20:57 ` XFree86-3.3.5-1.6.0b Tom Rini
@ 1999-10-07 16:45 ` Scott Janis
3 siblings, 0 replies; 10+ messages in thread
From: Scott Janis @ 1999-10-07 16:45 UTC (permalink / raw)
To: Tom Rini; +Cc: linuxppc-user, yellowdog-general, linuxppc-dev, mklinux-setup
Anyone know whre or how I can aquire an XML tool for linuxppc R4 and R5?
Tom Rini wrote:
> I'd like to announce some test RPMS for of XFree86-3.3.5 that will work
> under LinuxPPC 1999, YDL CS 1.x, and MkLinux pre-R1. These RPMS include
> the following:
>
> Anything that's been fixed in 3.3.5 over previous versions
> USB keymap problems (Backspace/delete)
> USB mouse stuff cleanup (mouseconfig sets BusMouse or IMPS/2)
> Cleaned up adb keymaps/keycodes/etc (Kostas Gewrgiou <gewrgiou@imbc.gr>)
> Updated Xautoconfig to take advantage of said fixes
> Updated Xconfigurator to take advantage of said fixes
> JDK fixes for XF68_FBDev
>
> Note, with the JDK fixes there is a 99% chance you will need to
> reconfigure X (old "Depth 32" is now 24, 16 is now 15 or 16, depending on
> weather it's really 15bit or 16bit.). If you have any problems with this
> release, please make sure you reconfigured your /etc/X11/XF86Config file
> with one of the provided tools. The old ones will not work properly.
>
> It's all available from ftp://devel.linuxppc.org/users/trini/XFree86-3.3.5
> For Xautoconfig, Xconfigurator and mouseconfig there are versions for
> uusbd (2.2.6) and normal USB stacks (2.2.10 from Paul M's site, 2.3.x,
> samba's kernel tree, etc).
>
> This fixes a good number of little bugs with USB (backspace in NS), and
> makes things a bit cleaner (you can configure USB for the new kernels),
> unless you're happy with your current setup, updating is sugjested, as
> there are many security fixes from 3.3.3.1 or 3.3.4 to 3.3.5.
>
> ---
> Tom Rini (TR1265)
> http://gate.crashing.org/~trini/
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 10+ messages in thread