* [PATCH] powerpc: Fix platinumfb for some modes
From: Benjamin Herrenschmidt @ 2005-12-13 6:48 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc64-dev, linuxppc-dev list
The platinumfb driver used only on some powermacs has an issue with some
video modes & limited VRAM. This patch fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Index: linux-work/drivers/video/platinumfb.h
===================================================================
--- linux-work.orig/drivers/video/platinumfb.h 2005-09-22 14:07:19.000000000 +1000
+++ linux-work/drivers/video/platinumfb.h 2005-11-25 17:17:17.000000000 +1100
@@ -158,7 +158,9 @@
/* 832x624, 75Hz (13) */
static struct platinum_regvals platinum_reg_init_13 = {
0x70,
- { 864, 1680, 3360 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB */
+ { 864, 1680, 3344 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB,
+ * and we use 3344 instead of 3360 to fit in 2Mb
+ */
{ 0xff0, 4, 0, 0, 0, 0, 0x299, 0,
0, 0x21e, 0x120, 0x10, 0x23f, 0x1f, 0x25, 0x37,
0x8a, 0x22a, 0x23e, 0x536, 0x534, 4, 9, 0x52,
Index: linux-work/drivers/video/platinumfb.c
===================================================================
--- linux-work.orig/drivers/video/platinumfb.c 2005-11-10 08:20:23.000000000 +1100
+++ linux-work/drivers/video/platinumfb.c 2005-11-25 17:17:17.000000000 +1100
@@ -138,13 +138,15 @@
init = platinum_reg_init[pinfo->vmode-1];
- if (pinfo->vmode == 13 && pinfo->cmode > 0)
- offset = 0x10;
+ if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8))
+ offset = 0x10;
+
info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
info->fix.visual = (pinfo->cmode == CMODE_8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
- info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + offset;
+ info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
+ + offset;
printk("line_length: %x\n", info->fix.line_length);
return 0;
}
@@ -221,7 +223,9 @@
static inline int platinum_vram_reqd(int video_mode, int color_mode)
{
return vmode_attrs[video_mode-1].vres *
- (vmode_attrs[video_mode-1].hres * (1<<color_mode) + 0x20) +0x1000;
+ (vmode_attrs[video_mode-1].hres * (1<<color_mode) +
+ ((video_mode == VMODE_832_624_75) &&
+ (color_mode > CMODE_8)) ? 0x10 : 0x20) + 0x1000;
}
#define STORE_D2(a, d) { \
^ permalink raw reply
* [PATCH] powerpc: Add pmac32 defconfig for ARCH=powerpc
From: Benjamin Herrenschmidt @ 2005-12-13 6:46 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc64-dev, linuxppc-dev list
This adds a defconfig for PowerMac with ARCH=powerpc
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Index: linux-work/arch/powerpc/configs/pmac32_defconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-work/arch/powerpc/configs/pmac32_defconfig 2005-12-13 17:24:16.000000000 +1100
@@ -0,0 +1,1729 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-rc5
+# Tue Dec 13 17:24:05 2005
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC=y
+CONFIG_PPC601_SYNC_FIX=y
+# CONFIG_TAU is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+CONFIG_PM_DEBUG=y
+CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+CONFIG_IP_NF_MATCH_DCCP=m
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
+# CONFIG_IP_NF_MANGLE is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_IP_DCCP_UNLOAD_HACK is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_TOSHIBA_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VLSI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC7XXX_OLD=m
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=y
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
+CONFIG_SCSI_MAC53C94=y
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+# CONFIG_IEEE1394_CMP is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+# CONFIG_WINDFARM is not set
+# CONFIG_ANSLCD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACE=y
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_AIRO is not set
+CONFIG_HERMES=m
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
+CONFIG_DRM=m
+# CONFIG_DRM_TDFX is not set
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_KEYWEST=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+CONFIG_FB_CONTROL=y
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+CONFIG_FB_IMSTT=y
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+# CONFIG_FB_MATROX_G is not set
+# CONFIG_FB_MATROX_I2C is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+# CONFIG_FB_ATY_XL_INIT is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_PMAC=m
+CONFIG_DMASOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+# CONFIG_SND_POWERMAC_AUTO_DRC is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# PCMCIA devices
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+CONFIG_USB_APPLETOUCH=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
^ permalink raw reply
* help reqd
From: prabha.j @ 2005-12-13 5:45 UTC (permalink / raw)
To: ppc
[-- Attachment #1: Type: text/plain, Size: 1213 bytes --]
Hi All,
I am having custom board which is similar to MPC8260ADS board. I want to
port linux on this board. I am having TRACE32 debugger.
When i put breakpoint on load_up_mmu, it won't stop at this point. It
shows running in the status bar and when i give break, it goes to panic
symbol and it hangs there. I cannot proceed further. Then i have to reload
the cmm file again.
Can any one tell me what and where is the problem.
I am using Linux-2.4.25 from denx and my boards memory map is
SDRAM 128MB(0x00000000) and Flash 1MB(starts from 0x30000000).
Thanks in advance.
best regards
Prabha J.
Tata Consultancy Services Limited
Mailto: prabha.j@tcs.com
Website: http://www.tcs.com
Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you
[-- Attachment #2: Type: text/html, Size: 1698 bytes --]
^ permalink raw reply
* More info on porting required
From: batsayan.das @ 2005-12-13 4:48 UTC (permalink / raw)
To: u-boot-users, linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 807 bytes --]
Hello,
Is there any reference book/study material (other than U-boot/Linux
documentation; mailing list ) available to port U-Boot/Linux on a PPC
based customs board?
Thanks
Batsayan Das
Tata Consultancy Services Limited
Mailto: batsayan.das@tcs.com
Website: http://www.tcs.com
Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you
[-- Attachment #2: Type: text/html, Size: 1035 bytes --]
^ permalink raw reply
* Re:Re: Can we compile them with eldk and debug them with BDI2000?
From: zengshuai @ 2005-12-13 3:48 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: ppc
thanks a lot.Would you give me more inf,please?
There were a test.c.
When we use "ppc_6xx-gcc -o test test.c",we can get a "test" which can running in Linux.
How can we get a "test" which can running in bareboard and be debuged using the BDI2000?
Would you give a flag example?
----- Original Message -----
From: Wolfgang Denk
To: zengshuai@sogou.com
Cc: ppc
Subject: Re: Can we compile them with eldk and debug them with BDI2000?
Sent: Mon Dec 12 21:26:57 CST 2005
> In message <4069241.1134390336250.JavaMail.postfix@mx3.mail.sohu.com> you wrote:
> > There are some example C programs in freescale's web.
> > They don't work in linux but bareboard.
> > Can we compile them with eldk and debug them with BDI2000?
>
> Yes. You may have to set up your own linker script, though. It would
> be probably much easier to run such code as standalone application in
> U-Boot (and yes, this too can be compiled using the ELDK and debugged
> using the BDI).
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering: Embedded and Realtime Systems, Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
> We are all agreed that your theory is crazy. The question which
> divides us is whether it is crazy enough to have a chance of being
> correct. My own feeling is that it is not crazy enough. - Niels Bohr
------------------------------
?????Sogou.com?2G??????????!
http://mail.sogou.com/recommend/sogoumail_invite_reg1.jsp?from=sogouinvitation&s_EMAIL=zengshuai%40sogou.com&username=&FullName=&Email=&verify=e197bd6dbd1fc7f8d6a035729df08d63
^ permalink raw reply
* Re: How to add external 16550 to TQM850L board?
From: debora liu @ 2005-12-13 2:42 UTC (permalink / raw)
To: zhou.yutao@zte.com.cn; +Cc: Linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 486 bytes --]
Hello, zhou.yutao@zte.com.cn
In message <2005-12-13 09:54:46 zhou.yutao@zte.com.cn> you wrote:
>Could you tell me where to set base address and IRQ in kernel?mabe in serial.c or correlative head file?
you can modify serial.c:
static int __init rs_init(void)
{
my_uart_init();
....
....
}
add my_uart_init(), it init OR and BR where your board uart use,
and fill rs_table with IRQ and IOBASE.
debora liu
deboraliu@tom.com
2005-12-13
[-- Attachment #2: fox.gif --]
[-- Type: image/gif, Size: 9519 bytes --]
^ permalink raw reply
* How to add external 16550 to TQM850L board?
From: zhou.yutao @ 2005-12-13 1:54 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-embedded
In-Reply-To: <20051212204054.2A1F7353A44@atlas.denx.de>
[-- Attachment #1: Type: text/plain, Size: 923 bytes --]
Hello,
Could you tell me where to set base address and IRQ in kernel?mabe in
serial.c or correlative head file? I searched the list mails and found
somebody said there are explanation in DENX CVS LABEL_2003_03_11_2055 to
LABEL_2003_03_11_2110,but how can I get them?
Thank you!
深圳市高新区W1-A栋4楼
tel:0755-26525674-8602
***********************************************
信息安全声明：本邮件包含信息归ZTE所有，
ZTE对该邮件拥有所有权利。请接收者注意
保密，未经发件人书面许可，不得向任何第
三方组织和个人透露本邮件所含信息的全部
或部分。以上声明仅适用于工作邮件。
Information Security Notice：
The information contained in this mail is
solely property of ZTE Corporation.
This mail communication is confidential.
Recipients named above are obligated to
maintain secrecy and are not permitted to
disclose the contents of this communication
to others.
***********************************************
[-- Attachment #2: Type: text/html, Size: 1333 bytes --]
^ permalink raw reply
* 82xx cascaded timers
From: Dmytro Bablinyuk @ 2005-12-13 1:20 UTC (permalink / raw)
To: linuxppc-embedded
I have the following code:
#define CPMTIMER_TGCR_GM1 0x08 /* gate mode */
#define CPMTIMER_TGCR_FRZ1 0x04 /* freeze timer */
#define CPMTIMER_TGCR_STP1 0x02 /* stop timer */
#define CPMTIMER_TGCR_RST1 0x01 /* restart timer */
#define CPMTIMER_TGCR_CAS2 0x80 /* cascade timer */
#define CPMTIMER_TGCR_FRZ2 0x40 /* freeze timer */
#define CPMTIMER_TGCR_STP2 0x20 /* stop timer */
#define CPMTIMER_TGCR_RST2 0x10 /* restart timer */
#define CPMTIMER_TMR_ORI 0x0010 /* output reference interrupt
enable */
#define CPMTIMER_TMR_FRR 0x0008 /* free run/restart */
#define CPMTIMER_TMR_ICLK_INT16 0x0004 /* source internal clock/16 */
#define CPMTIMER_TMR_ICLK_INT 0x0002 /* source internal clock */
-----
[ SCENARIO 1 ]: 16bit Timer1 is triggering interrupt handler (every
2.25microsec no matter what value of cpmt_trr1 is ??? )
immap->im_cpmtimer.cpmt_tgcr1 &= ~(CPMTIMER_TGCR_CAS2 |
CPMTIMER_TGCR_GM1 |
CPMTIMER_TGCR_RST1 |
CPMTIMER_TGCR_FRZ1 |
CPMTIMER_TGCR_STP1);
immap->im_cpmtimer.cpmt_tmr1 = CPMTIMER_TMR_ORI | CPMTIMER_TMR_FRR
| CPMTIMER_TMR_ICLK_INT16;
immap->im_cpmtimer.cpmt_trr1 = 10000;
immap->im_cpmtimer.cpmt_tcr1 = 0;
immap->im_cpmtimer.cpmt_tcn1 = 0;
immap->im_cpmtimer.cpmt_ter1 = 0;
request_irq(SIU_INT_TIMER1,
&timer_handler,
SA_INTERRUPT,
"timer_handler",
NULL);
/* and start timer1 */
immap->im_cpmtimer.cpmt_tgcr1 |= CPMTIMER_TGCR_RST1;
-----
[ SCENARIO 2 ]: Cascaded timers: 32bit Timer1 and Timer2 - does not work
- interrupt never occurs.
immap->im_cpmtimer.cpmt_tgcr1 = CPMTIMER_TGCR_CAS2 | CPMTIMER_TGCR_GM1;
immap->im_cpmtimer.cpmt_trr1 = 10000;
immap->im_cpmtimer.cpmt_tcr1 = 0;
immap->im_cpmtimer.cpmt_tcr2 = 0;
immap->im_cpmtimer.cpmt_tcn1 = 0;
immap->im_cpmtimer.cpmt_tcn2 = 0;
immap->im_cpmtimer.cpmt_ter1 = 0;
immap->im_cpmtimer.cpmt_ter2 = 0;
immap->im_cpmtimer.cpmt_tmr1 = 0;
immap->im_cpmtimer.cpmt_tmr2 = CPMTIMER_TMR_ORI | CPMTIMER_TMR_FRR |
CPMTIMER_TMR_ICLK_INT16;
request_irq(SIU_INT_TIMER2,
&timer_handler,
SA_INTERRUPT,
"timer_handler",
NULL);
immap->im_cpmtimer.cpmt_tgcr1 |= CPMTIMER_TGCR_RST1;
Does anybody knows what I missed in cascaded timers initialisation
(Scenario2) and why when I use 16 bit timer (Scenario1) it always
triggers interrupt within 2.25microsec no matter what "trr1" value is?
Thank you very much for any help.
^ permalink raw reply
* Re: [2.6 patch] defconfig's shouldn't set CONFIG_BROKEN=y
From: Adrian Bunk @ 2005-12-13 0:10 UTC (permalink / raw)
To: linux-kernel, tony.luck, linux-ia64, matthew, grundler,
parisc-linux, paulus, linuxppc-dev, lethal, kkojima, dwmw2,
linux-mtd
In-Reply-To: <20051211194437.GB22537@flint.arm.linux.org.uk>
On Sun, Dec 11, 2005 at 07:44:37PM +0000, Russell King wrote:
> On Sun, Dec 11, 2005 at 08:31:18PM +0100, Adrian Bunk wrote:
> > On Sun, Dec 11, 2005 at 07:21:10PM +0000, Russell King wrote:
> > > On Sun, Dec 11, 2005 at 07:52:12PM +0100, Adrian Bunk wrote:
> > > > defconfig's shouldn't set CONFIG_BROKEN=y.
> > >
> > > NACK. This changes other configuration options in addition, for example
> > > in collie_defconfig:
> > >
> > > -CONFIG_MTD_OBSOLETE_CHIPS=y
> > > -# CONFIG_MTD_AMDSTD is not set
> > > -CONFIG_MTD_SHARP=y
> > > -# CONFIG_MTD_JEDEC is not set
> >
> > That's not a problem introduced by my patch.
>
> It's a problem introduced by your patch because the resulting defconfig
> file becomes _wrong_ by your change, and other changes in the defconfig
> are thereby hidden.
>...
No, CONFIG_BROKEN=y in a defconfig file is a bug.
Either the defconfig doesn't use BROKEN code in which case it's simply
wrong, or it's a wrong workaround (as in the CONFIG_MTD_SHARP case) for
a wrong BROKEN dependency.
And it's a dangerous workaround:
Consider e.g. that "both marked as obsolete and BROKEN" are the best
candidates for "remove obsolete code" cleanups - and there goes your
driver to /dev/null ...
> Russell King
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply
* Re: ibm emac driver update
From: Wolfgang Denk @ 2005-12-12 20:40 UTC (permalink / raw)
To: Simon Haynes; +Cc: linuxppc-embedded
In-Reply-To: <200512121726.34944.simon@baydel.com>
In message <200512121726.34944.simon@baydel.com> you wrote:
> I am running a Ebony board with linux-2.6.12-rc1 and I amd having intermittent
> network problems. Having searched the archives it would seem that the driver
> for the IBM EMAC is buggy ?
Patches have been posted on this list. See the archives.
> Can anyone point me in the direction of a suitable patch for this kernel ?
We have all this integrated and tested in our kernel tree. Links:
Source Code:
git repository: http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
FTP Snapshot: ftp://ftp.denx.de/pub/linux/linux-2.6.15-rc2-2005-12-03-2208.tar.bz2
Ready to run code for AMCC's Eval Kits:
U-Boot images: ftp://ftp.denx.de/pub/u-boot/images/amcc/
Linux images: ftp://ftp.denx.de/pub/linux/images/amcc/
Documentation: http://www.denx.de/wiki/DULG/BoardSelect
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
We have found all life forms in the galaxy are capable of superior
development.
-- Kirk, "The Gamesters of Triskelion", stardate 3211.7
^ permalink raw reply
* Re: ibm emac driver update
From: Eugene Surovegin @ 2005-12-12 18:14 UTC (permalink / raw)
To: Simon Haynes; +Cc: linuxppc-embedded
In-Reply-To: <200512121726.34944.simon@baydel.com>
On Mon, Dec 12, 2005 at 05:26:34PM +0000, Simon Haynes wrote:
> I am running a Ebony board with linux-2.6.12-rc1 and I amd having intermittent
> network problems. Having searched the archives it would seem that the driver
> for the IBM EMAC is buggy ?
>
> I have tried to patch my kernel with
>
> http://kernel.ebsname.net/emac/4xx_napi_emac.diff
>
> I believe this is almost a total driver re-write. Is this correct ?
>
> After having a couple of problems applying the patch, Kconfig and
> ibm_emac_core.c. I fixed up the original code and applied the patch.
>
> On compilation the build fails with missing references to kzalloc,
> which I guess I could easily fix with kmalloc and memset.
>
> However there is also an undefined field, dcr_base, in the ocp_func_mal_data
> structure. This structure appears to be defined in include/asm/ibm_ocp.h and
> this file does not appear to be changed by the patch. I guess this patch is
> for a later kernel.
>
> Can anyone point me in the direction of a suitable patch for this kernel ?
I'm not sure about 2.6.12-rc1, but you can try GIT tree/patches at
http://kernel.ebshome.net.
Hint: you can assume that in addition to emac_3-2.6-28.diff, there are
also emac_3-2.6-NN.diff (NN < 28) on my website which were made for
earlier kernel versions :).
Alternatively, you can backport all relevant stuff from current 2.6 or
you can pay someone to do this for you.
--
Eugene
^ permalink raw reply
* ibm emac driver update
From: Simon Haynes @ 2005-12-12 17:26 UTC (permalink / raw)
To: linuxppc-embedded
I am running a Ebony board with linux-2.6.12-rc1 and I amd having intermittent
network problems. Having searched the archives it would seem that the driver
for the IBM EMAC is buggy ?
I have tried to patch my kernel with
http://kernel.ebsname.net/emac/4xx_napi_emac.diff
I believe this is almost a total driver re-write. Is this correct ?
After having a couple of problems applying the patch, Kconfig and
ibm_emac_core.c. I fixed up the original code and applied the patch.
On compilation the build fails with missing references to kzalloc,
which I guess I could easily fix with kmalloc and memset.
However there is also an undefined field, dcr_base, in the ocp_func_mal_data
structure. This structure appears to be defined in include/asm/ibm_ocp.h and
this file does not appear to be changed by the patch. I guess this patch is
for a later kernel.
Can anyone point me in the direction of a suitable patch for this kernel ?
Many Thanks
Simon.
^ permalink raw reply
* chrdevs[] explained
From: Gabe.Johnson @ 2005-12-12 16:38 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 148 bytes --]
Could someone explain to me the chrdevs array found in fs/char_dev.c how
does that get populated and with what does it get populated?
Thanks,
Gabe
[-- Attachment #2: Type: text/html, Size: 278 bytes --]
^ permalink raw reply
* Re: 82xx IRQ handling
From: Kumar Gala @ 2005-12-12 14:28 UTC (permalink / raw)
To: Dmytro Bablinyuk; +Cc: linuxppc-embedded
In-Reply-To: <439D120E.9010606@rftechnology.com.au>
On Dec 12, 2005, at 12:00 AM, Dmytro Bablinyuk wrote:
>>> immap->im_intctl.ic_simrh &= ~(0x0800);
>> You should not be messing around with this register
>> in your code. The generic 82xx interrupt functions
>> will properly manage this for you.
> Thank you Dan,
> It's working now!
>
> By the way question - shall I program somewhere an edge of the IRQ
> or it always triggers on the rising edge?
>
> Also does anybody knows any source code example of using 82xx
> General Purpose Timer Unit so that it triggers interrupt handler
> after some period.
The IRQ pins are set to edge trigger by default.
- kumar
^ permalink raw reply
* Re: Can we compile them with eldk and debug them with BDI2000?
From: Wolfgang Denk @ 2005-12-12 13:26 UTC (permalink / raw)
To: zengshuai; +Cc: ppc
In-Reply-To: <4069241.1134390336250.JavaMail.postfix@mx3.mail.sohu.com>
In message <4069241.1134390336250.JavaMail.postfix@mx3.mail.sohu.com> you wrote:
> There are some example C programs in freescale's web.
> They don't work in linux but bareboard.
> Can we compile them with eldk and debug them with BDI2000?
Yes. You may have to set up your own linker script, though. It would
be probably much easier to run such code as standalone application in
U-Boot (and yes, this too can be compiled using the ELDK and debugged
using the BDI).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
We are all agreed that your theory is crazy. The question which
divides us is whether it is crazy enough to have a chance of being
correct. My own feeling is that it is not crazy enough. - Niels Bohr
^ permalink raw reply
* Can we compile them with eldk and debug them with BDI2000?
From: zengshuai @ 2005-12-12 12:25 UTC (permalink / raw)
To: ppc
There are some example C programs in freescale's web.
They don't work in linux but bareboard.
Can we compile them with eldk and debug them with BDI2000?
Thanks.
------------------------------
我现在使用Sogou.com的2G邮箱了，你也来试试吧!
http://mail.sogou.com/recommend/sogoumail_invite_reg1.jsp?from=sogouinvitation&s_EMAIL=zengshuai%40sogou.com&username=linuxppc-embedded&FullName=linuxppc-embedded&Email=linuxppc-embedded%40ozlabs.org&verify=755eff4e640bdcfc57d93cbd8b0a9cb7
^ permalink raw reply
* Re: [2.6 patch] defconfig's shouldn't set CONFIG_BROKEN=y
From: David Woodhouse @ 2005-12-12 9:38 UTC (permalink / raw)
To: Adrian Bunk
Cc: tony.luck, linux-ia64, grundler, matthew, linux-kernel, linux-mtd,
linuxppc-dev, lethal, kkojima, parisc-linux
In-Reply-To: <20051211193118.GR23349@stusta.de>
On Sun, 2005-12-11 at 20:31 +0100, Adrian Bunk wrote:
> Either the depency of MTD_OBSOLETE_CHIPS on BROKEN is correct (in
> which case CONFIG_MTD_OBSOLETE_CHIPS=y wouldn't bring you anything),
> or the dependency on BROKEN is not correct and should be corrected.
>
> David, can you comment on this issue?
I don't see any justification for MTD_OBSOLETE_CHIPS depending on
BROKEN. That option covers a few of the obsolete chip drivers which
people shouldn't be using any more -- and I'm perfectly willing to
believe that one or two of those don't work any more, but if that's the
case then those individual drivers ought to be marked BROKEN (or just
removed). We shouldn't mark MTD_OBSOLETE_CHIPS broken.
I'd like to see the collie_defconfig updated to use the appropriate CFI
driver back end.
--
dwmw2
^ permalink raw reply
* eldk-3.1.1 mpc823 SCC3 CTS/CD
From: debora liu @ 2005-12-12 8:40 UTC (permalink / raw)
To: linuxppc-embedde
[-- Attachment #1: Type: text/plain, Size: 884 bytes --]
Hello denx:
I found one bug when SCC3 as UART, my cpu is mpc823.
cts/cd config as:
CTS PC5
CD PC4
your ELDK-3.1.1 linux-2.4.25 uart.c set pcpar,pcso, pcdir:
immap->im_ioport.iop_pcpar &= ~iobits;
immap->im_ioport.iop_pcso |= iobits;
immap->im_ioport.iop_pcdir &= ~iobits;
but MPC823UM tell me CD3 and CTS3 is bit6 and bit7 on PCSO register, so I modify:
fix_pcso = iobits;
#if defined(CONFIG_UART_CTS_CONTROL_SCC3)
fix_pcso &=~(1 << (15 - CONFIG_CTS3_PIN));
fix_pcso |= 0x0100;
#endif
#if defined(CONFIG_UART_CD_CONTROL_SCC3)
fix_pcso &=~(1 << (15 - CONFIG_CD3_PIN));
fix_pcso |= 0x0200;
#endif
immap->im_ioport.iop_pcpar &= ~iobits;
immap->im_ioport.iop_pcso |= fix_pcso;
immap->im_ioport.iop_pcdir &= ~iobits;
My board have success communication to moderm with SCC3 hard flow control.
debora liu
deboraliu@tom.com
2005-12-12
[-- Attachment #2: fox.gif --]
[-- Type: image/gif, Size: 9519 bytes --]
^ permalink raw reply
* Re: Re: 82xx IRQ handling
From: debora liu @ 2005-12-12 8:31 UTC (permalink / raw)
To: Dmytro Bablinyuk; +Cc: Linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 2469 bytes --]
Hello, Dmytro Bablinyuk
In message <2005-12-12 14:00:46 dmytro.bablinyuk@rftechnology.com.au> you wrote:
>
>By the way question - shall I program somewhere an edge of the IRQ or it
>always triggers on the rising edge?
>
IRQ_POLARITY_POSITIVE /* high level or low->high edge */
IRQ_POLARITY_NEGATIVE /* low level or high->low edge */
you should modify OpenPIC_InitSenses, example my board:
static u_char sc82xx_openpic_initsenses[] __initdata = {
#if defined(CONFIG_SVM_GEMINI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 0,PCI0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 1 ,PCI1*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 2 ,PCI2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DUART CH1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DUART CH2 */
(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ3, PCI3 or DPRAM */
(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ4, DPRAM */
#elif defined (CONFIG_SVM_IT6160A)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ 2, xr16L788 chip1*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DUART CH1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DUART CH2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ3, xr16L788 chip2*/
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* EPIC IRQ4,spare */
#else
#error No board defined.!!!
#endif
};
static void __init
sc82xx_init_IRQ(void)
{
OpenPIC_InitSenses = sc82xx_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof(sc82xx_openpic_initsenses);
/*
* We need to tell openpic_set_sources where things actually are.
* mpc10x_common will setup OpenPIC_Addr at ioremap(EUMB phys base +
* EPIC offset (0x40000)); The EPIC IRQ Register Address Map -
* Interrupt Source Configuration Registers gives these numbers
* as offsets starting at 0x50200, we need to adjust occordinly.
*/
openpic_set_sources(0, 3, OpenPIC_Addr + 0x10200); /* 0=IRQ0, 1=IRQ1, 2=IRQ2 *
openpic_set_sources(3, 2, OpenPIC_Addr + 0x11120); /* 3=UART0, 4=UART1 *
openpic_set_sources(5, 2, OpenPIC_Addr + 0x10260); /* 5=IRQ3, 6=IRQ4 *
openpic_init (0);
}
= = = = = = = = = = = = = = = = = = = =
debora liu
deboraliu@tom.com
2005-12-12
[-- Attachment #2: fox.gif --]
[-- Type: image/gif, Size: 9519 bytes --]
^ permalink raw reply
* RE: Linux process ABI broken in 2.6?
From: Joakim Tjernlund @ 2005-12-12 8:09 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
=20
>=20
> Joakim Tjernlund writes:
>=20
> > Is it too much trouble to define r7 to always have
> > a zero
> > value at process startup?
>=20
> That's not much trouble, but what will you do for existing kernels?
> Won't you have to do something like testing *r1 anyway?
No, I don't plan to do anything. I just got the first report that static
uClibc apps dosen't work for 2.6, so if the current kernel is fixed I
will just
point to a newer kernel or they can patch their old kernel with the
required 2 line fix.
Thanks
Jocke
>=20
> Paul.
>=20
>=20
^ permalink raw reply
* Re: 82xx IRQ handling
From: Dmytro Bablinyuk @ 2005-12-12 6:00 UTC (permalink / raw)
To: Dan Malek; +Cc: linuxppc-embedded
In-Reply-To: <dc0620490d9bef30d3a4b629483cd3f9@embeddededge.com>
>
>> immap->im_intctl.ic_simrh &= ~(0x0800);
>
>
> You should not be messing around with this register
> in your code. The generic 82xx interrupt functions
> will properly manage this for you.
Thank you Dan,
It's working now!
By the way question - shall I program somewhere an edge of the IRQ or it
always triggers on the rising edge?
Also does anybody knows any source code example of using 82xx General
Purpose Timer Unit so that it triggers interrupt handler after some period.
Thank you
^ permalink raw reply
* Re: 82xx IRQ handling
From: Dan Malek @ 2005-12-12 5:01 UTC (permalink / raw)
To: Dmytro Bablinyuk; +Cc: linuxppc-embedded
In-Reply-To: <439CE3A2.8020603@rftechnology.com.au>
On Dec 11, 2005, at 9:42 PM, Dmytro Bablinyuk wrote:
> immap->im_intctl.ic_simrh &= ~(0x0800);
You should not be messing around with this register
in your code. The generic 82xx interrupt functions
will properly manage this for you.
> request_irq(IRQ,
> &irq_handler, /* our handler */
> irq_flags,
> "interrupt_test",
> NULL);
This is all you should do.
Thanks.
-- Dan
^ permalink raw reply
* 82xx IRQ handling
From: Dmytro Bablinyuk @ 2005-12-12 2:42 UTC (permalink / raw)
To: linuxppc-embedded
Hi everybody,
I am trying to setup an IRQ handler for IRQ4:
#define IRQ SIU_INT_IRQ4
volatile cpm2_map_t *immap;
int irq_flags = 0;
immap = (cpm2_map_t *)CPM_MAP_ADDR;
immap->im_intctl.ic_simrh &= ~(0x0800);
request_irq(IRQ,
&irq_handler, /* our handler */
irq_flags,
"interrupt_test",
NULL);
immap->im_intctl.ic_simrh |= 0x0800;
I can see on a scope that IRQ line pulls up/down but handler get never
called. I am sure I made some very stupid mistake here but I will really
appreciate if somebody can help me with this.
Thank you
Dmytro
^ permalink raw reply
* Re: [PATCH] powerpc: Fix clock spreading setting on some powermacs
From: Paul Mackerras @ 2005-12-12 3:27 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev
In-Reply-To: <20051211184520.7f565283.akpm@osdl.org>
Andrew Morton writes:
> Linus is back online now. Paul, do you intend to send a batch to Linus?
> If so, please do so asap so I can merge up anything that's left over.
Yes, I have all of those patches in my powerpc-merge tree and I'll
send him a "please pull" message once it's mirrored to kernel.org.
Paul.
^ permalink raw reply
* Re: [PATCH] powerpc: Fix clock spreading setting on some powermacs
From: Andrew Morton @ 2005-12-12 2:45 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1134353605.6989.69.camel@gaston>
Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
>
> The code that sets the clock spreading feature of the Intrepid ASIC
> must not be run on some machine models or those won't boot. This
> fixes it.
I have a bunch of powerpc fixes for 2.6.15, some of which are in Paul's
tree. I presently have:
powerpc-fix-a-huge-page-bug.patch
powerpc-remove-debug-code-in-hash-path.patch
fix-windfarm-model-id-table.patch
powerpc-set-cache-info-defaults.patch
powerpc-fix-slb-flushing-path-in-hugepage.patch
powerpc-add-missing-icache-flushes-for-hugepages.patch
ppc32-set-smp_tb_synchronized-on-up-with-smp-kernel.patch
Linus is back online now. Paul, do you intend to send a batch to Linus?
If so, please do so asap so I can merge up anything that's left over.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox