* [PATCH 8/8] Add support for Xilinx ML403 reference design
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Add support for Xilinx ML403 reference design
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/boot/simple/embed_config.c | 41 +++++
arch/ppc/platforms/4xx/Kconfig | 8 +
arch/ppc/platforms/4xx/Makefile | 2
arch/ppc/platforms/4xx/xilinx_ml403.c | 177 ++++++++++++++++++++++
arch/ppc/platforms/4xx/xilinx_ml403.h | 49 ++++++
arch/ppc/platforms/4xx/xparameters/xparameters.h | 13 ++
include/asm-ppc/ibm4xx.h | 4
7 files changed, 291 insertions(+), 3 deletions(-)
create mode 100644 arch/ppc/platforms/4xx/xilinx_ml403.c
create mode 100644 arch/ppc/platforms/4xx/xilinx_ml403.h
03eaaad1784a4094cecd57f3aafbfe8832742505
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
index df24202..0172eb0 100644
--- a/arch/ppc/boot/simple/embed_config.c
+++ b/arch/ppc/boot/simple/embed_config.c
@@ -745,7 +745,7 @@ embed_config(bd_t **bdp)
}
#endif /* WILLOW */
-#ifdef CONFIG_XILINX_ML300
+#if defined(CONFIG_XILINX_ML300)
void
embed_config(bd_t ** bdp)
{
@@ -784,6 +784,45 @@ embed_config(bd_t ** bdp)
}
#endif /* CONFIG_XILINX_ML300 */
+#if defined(CONFIG_XILINX_ML403)
+void
+embed_config(bd_t ** bdp)
+{
+ static const unsigned long line_size = 32;
+ static const unsigned long congruence_classes = 256;
+ unsigned long addr;
+ unsigned long dccr;
+ bd_t *bd;
+
+ /*
+ * Invalidate the data cache if the data cache is turned off.
+ * - The 405 core does not invalidate the data cache on power-up
+ * or reset but does turn off the data cache. We cannot assume
+ * that the cache contents are valid.
+ * - If the data cache is turned on this must have been done by
+ * a bootloader and we assume that the cache contents are
+ * valid.
+ */
+ __asm__("mfdccr %0": "=r" (dccr));
+ if (dccr == 0) {
+ for (addr = 0;
+ addr < (congruence_classes * line_size);
+ addr += line_size) {
+ __asm__("dccci 0,%0": :"b"(addr));
+ }
+ }
+
+ bd = &bdinfo;
+ *bdp = bd;
+ bd->bi_memsize = XPAR_PLB_DDR_0_MEM0_HIGHADDR + 1;
+ bd->bi_intfreq = XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ;
+ bd->bi_busfreq = XPAR_XUARTNS550_CLOCK_HZ;
+ bd->bi_pci_busfreq = 0;
+ timebase_period_ns = 1000000000 / bd->bi_tbfreq;
+ /* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
+}
+#endif /* CONFIG_XILINX_ML403 */
+
#ifdef CONFIG_IBM_OPENBIOS
/* This could possibly work for all treeboot roms.
*/
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 266280c..f7a5848 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -57,6 +57,10 @@ config XILINX_ML300
help
This option enables support for the Xilinx ML300 evaluation board.
+config XILINX_ML403
+ bool "Xilinx-ML403"
+ help
+ This option enables support for the Xilinx ML403 evaluation board.
endchoice
choice
@@ -194,7 +198,7 @@ config 405GPR
config XILINX_VIRTEX
bool
- depends on XILINX_ML300
+ depends on XILINX_ML300 || XILINX_ML403
default y
config STB03xxx
@@ -204,7 +208,7 @@ config STB03xxx
config EMBEDDEDBOOT
bool
- depends on EP405 || XILINX_ML300
+ depends on EP405 || XILINX_ML300 || XILINX_ML403
default y
config IBM_OPENBIOS
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 4db749d..9dd5629 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REDWOOD_6) += redwood6.o
obj-$(CONFIG_SYCAMORE) += sycamore.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o
+obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o
obj-$(CONFIG_405GP) += ibm405gp.o
obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
@@ -25,3 +26,4 @@ obj-$(CONFIG_440SP) += ibm440sp.o
obj-$(CONFIG_405EP) += ibm405ep.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
obj-$(CONFIG_XILINX_VIRTEX) += virtex.o
+
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
new file mode 100644
index 0000000..4c0c7e4
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml403.c
@@ -0,0 +1,177 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml403.c
+ *
+ * Xilinx ML403 evaluation board initialization
+ *
+ * Author: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * 2005 (c) Secret Lab Technologies Ltd.
+ * 2002-2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/serialP.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc_sys.h>
+
+#include <syslib/gen550.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+/*
+ * As an overview of how the following functions (platform_init,
+ * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
+ * kernel startup procedure, here's a call tree:
+ *
+ * start_here arch/ppc/kernel/head_4xx.S
+ * early_init arch/ppc/kernel/setup.c
+ * machine_init arch/ppc/kernel/setup.c
+ * platform_init this file
+ * ppc4xx_init arch/ppc/syslib/ppc4xx_setup.c
+ * parse_bootinfo
+ * find_bootinfo
+ * "setup some default ppc_md pointers"
+ * MMU_init arch/ppc/mm/init.c
+ * *ppc_md.setup_io_mappings == ml403_map_io this file
+ * ppc4xx_map_io arch/ppc/syslib/ppc4xx_setup.c
+ * start_kernel init/main.c
+ * setup_arch arch/ppc/kernel/setup.c
+ * #if defined(CONFIG_KGDB)
+ * *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
+ * #endif
+ * *ppc_md.setup_arch == ml403_setup_arch this file
+ * ppc4xx_setup_arch arch/ppc/syslib/ppc4xx_setup.c
+ * ppc4xx_find_bridges arch/ppc/syslib/ppc405_pci.c
+ * init_IRQ arch/ppc/kernel/irq.c
+ * *ppc_md.init_IRQ == ml403_init_IRQ this file
+ * ppc4xx_init_IRQ arch/ppc/syslib/ppc4xx_setup.c
+ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c
+ */
+
+/* Board specifications structures */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+ {
+ /* Only one entry, always assume the same design */
+ .ppc_sys_name = "Xilinx ML403 Reference Design",
+ .mask = 0x00000000,
+ .value = 0x00000000,
+ .num_devices = 1,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ VIRTEX_UART,
+ },
+ },
+};
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+
+static volatile unsigned *powerdown_base =
+ (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
+
+static void
+xilinx_power_off(void)
+{
+ local_irq_disable();
+ out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
+ while (1) ;
+}
+#endif
+
+void __init
+ml403_map_io(void)
+{
+ ppc4xx_map_io();
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+ powerdown_base = ioremap((unsigned long) powerdown_base,
+ XPAR_POWER_0_POWERDOWN_HIGHADDR -
+ XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
+#endif
+}
+
+/* Early serial support functions */
+static void __init
+ml403_early_serial_init(int num, struct plat_serial8250_port *pdata)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ struct uart_port serial_req;
+
+ memset(&serial_req, 0, sizeof(serial_req));
+ serial_req.mapbase = pdata->mapbase;
+ serial_req.membase = pdata->membase;
+ serial_req.irq = pdata->irq;
+ serial_req.uartclk = pdata->uartclk;
+ serial_req.regshift = pdata->regshift;
+ serial_req.iotype = pdata->iotype;
+ serial_req.flags = pdata->flags;
+ gen550_init(num, &serial_req);
+#endif
+}
+
+void __init
+ml403_early_serial_map(void)
+{
+#ifdef CONFIG_SERIAL_8250
+ struct plat_serial8250_port *pdata;
+ int i = 0;
+
+ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
+ while(pdata && pdata->flags)
+ {
+ pdata->membase = ioremap(pdata->mapbase, 0x100);
+ ml403_early_serial_init(i, pdata);
+ pdata++;
+ i++;
+ }
+#endif /* CONFIG_SERIAL_8250 */
+}
+
+void __init
+ml403_setup_arch(void)
+{
+ ml403_early_serial_map();
+ ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */
+
+ /* Identify the system */
+ printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
+}
+
+/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
+void __init
+ml403_init_irq(void)
+{
+ ppc4xx_init_IRQ();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ ppc4xx_init(r3, r4, r5, r6, r7);
+
+ identify_ppc_sys_by_id(mfspr(SPRN_PVR));
+
+ ppc_md.setup_arch = ml403_setup_arch;
+ ppc_md.setup_io_mappings = ml403_map_io;
+ ppc_md.init_IRQ = ml403_init_irq;
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+ ppc_md.power_off = xilinx_power_off;
+#endif
+
+#ifdef CONFIG_KGDB
+ ppc_md.early_serial_map = ml403_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h
new file mode 100644
index 0000000..4735969
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml403.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml403.h
+ *
+ * Include file that defines the Xilinx ML403 reference design
+ *
+ * Author: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * 2005 (c) Secret Lab Technologies Ltd.
+ * 2002-2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_XILINX_ML403_H__
+#define __ASM_XILINX_ML403_H__
+
+/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */
+#include <platforms/4xx/virtex.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct board_info {
+ unsigned int bi_memsize; /* DRAM installed, in bytes */
+ unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
+ unsigned int bi_intfreq; /* Processor speed, in Hz */
+ unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+#endif /* !__ASSEMBLY__ */
+
+/* We don't need anything mapped. Size of zero will accomplish that. */
+#define PPC4xx_ONB_IO_PADDR 0u
+#define PPC4xx_ONB_IO_VADDR 0u
+#define PPC4xx_ONB_IO_SIZE 0u
+
+#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design"
+
+#endif /* __ASM_XILINX_ML403_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
index 26ee822..22b0088 100644
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -32,6 +32,19 @@
#define VIRTEX_INTC_BASEADDR XPAR_DCR_INTC_0_BASEADDR
#define VIRTEX_INTC_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
+#elif defined(CONFIG_XILINX_ML403)
+ #include "xparameters_ml403.h"
+
+ /* Serial ports */
+ #define VIRTEX_UART_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR + 0x1000)
+ #define VIRTEX_UART_0_IRQ XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
+ #define VIRTEX_UART_0_CLK XPAR_XUARTNS550_CLOCK_HZ
+
+ /* Values for setting up interrupt controller */
+ #define VIRTEX_XINTC_USE_DCR XPAR_XINTC_USE_DCR
+ #define VIRTEX_INTC_BASEADDR XPAR_OPB_INTC_0_BASEADDR
+ #define VIRTEX_INTC_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
+
#else
/* Add other board xparameter includes here before the #else */
#error No *_xparameters.h file included
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
index e992369..c49c462 100644
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -51,6 +51,10 @@
#include <platforms/4xx/xilinx_ml300.h>
#endif
+#if defined(CONFIG_XILINX_ML403)
+#include <platforms/4xx/xilinx_ml403.h>
+#endif
+
#ifndef __ASSEMBLY__
#ifdef CONFIG_40x
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 7/8] Migrate ML300 reference design to the platform bus
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Migrate ML300 reference design to the platform bus
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/Kconfig.debug | 2 -
arch/ppc/platforms/4xx/xilinx_ml300.c | 74 +++++++++++++++++++++++----------
arch/ppc/platforms/4xx/xilinx_ml300.h | 2 -
arch/ppc/syslib/Makefile | 2 -
arch/ppc/syslib/xilinx_pic.c | 10 ++--
5 files changed, 60 insertions(+), 30 deletions(-)
973d3c2f229847e2e8e04999c1aa07b04f4c0234
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
index 61653cb..8cc75ab 100644
--- a/arch/ppc/Kconfig.debug
+++ b/arch/ppc/Kconfig.debug
@@ -67,7 +67,7 @@ config SERIAL_TEXT_DEBUG
config PPC_OCP
bool
- depends on IBM_OCP || XILINX_OCP
+ depends on IBM_OCP
default y
endmenu
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index b0de0a2..267afb5 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -17,12 +17,14 @@
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
#include <linux/serialP.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
-#include <platforms/4xx/virtex.h> /* for NR_SER_PORTS */
+#include <syslib/gen550.h>
+#include <platforms/4xx/xparameters/xparameters.h>
/*
* As an overview of how the following functions (platform_init,
@@ -54,6 +56,22 @@
* ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c
*/
+/* Board specifications structures */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+ {
+ /* Only one entry, always assume the same design */
+ .ppc_sys_name = "Xilinx ML300 Reference Design",
+ .mask = 0x00000000,
+ .value = 0x00000000,
+ .num_devices = 1,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ VIRTEX_UART,
+ },
+ },
+};
+
#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
static volatile unsigned *powerdown_base =
@@ -80,28 +98,39 @@ ml300_map_io(void)
#endif
}
+/* Early serial support functions */
static void __init
+ml300_early_serial_init(int num, struct plat_serial8250_port *pdata)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ struct uart_port serial_req;
+
+ memset(&serial_req, 0, sizeof(serial_req));
+ serial_req.mapbase = pdata->mapbase;
+ serial_req.membase = pdata->membase;
+ serial_req.irq = pdata->irq;
+ serial_req.uartclk = pdata->uartclk;
+ serial_req.regshift = pdata->regshift;
+ serial_req.iotype = pdata->iotype;
+ serial_req.flags = pdata->flags;
+ gen550_init(num, &serial_req);
+#endif
+}
+
+void __init
ml300_early_serial_map(void)
{
#ifdef CONFIG_SERIAL_8250
- struct serial_state old_ports[] = { SERIAL_PORT_DFNS };
- struct uart_port port;
- int i;
-
- /* Setup ioremapped serial port access */
- for (i = 0; i < ARRAY_SIZE(old_ports); i++ ) {
- memset(&port, 0, sizeof(port));
- port.membase = ioremap((phys_addr_t)(old_ports[i].iomem_base), 16);
- port.irq = old_ports[i].irq;
- port.uartclk = old_ports[i].baud_base * 16;
- port.regshift = old_ports[i].iomem_reg_shift;
- port.iotype = SERIAL_IO_MEM;
- port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
- port.line = i;
-
- if (early_serial_setup(&port) != 0) {
- printk("Early serial init of port %d failed\n", i);
- }
+ struct plat_serial8250_port *pdata;
+ int i = 0;
+
+ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
+ while(pdata && pdata->flags)
+ {
+ pdata->membase = ioremap(pdata->mapbase, 0x100);
+ ml300_early_serial_init(i, pdata);
+ pdata++;
+ i++;
}
#endif /* CONFIG_SERIAL_8250 */
}
@@ -109,9 +138,8 @@ ml300_early_serial_map(void)
void __init
ml300_setup_arch(void)
{
- ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */
-
ml300_early_serial_map();
+ ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */
/* Identify the system */
printk(KERN_INFO "Xilinx Virtex-II Pro port\n");
@@ -131,6 +159,8 @@ platform_init(unsigned long r3, unsigned
{
ppc4xx_init(r3, r4, r5, r6, r7);
+ identify_ppc_sys_by_id(mfspr(SPRN_PVR));
+
ppc_md.setup_arch = ml300_setup_arch;
ppc_md.setup_io_mappings = ml300_map_io;
ppc_md.init_IRQ = ml300_init_irq;
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
index 8993981..ae8bf13 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -41,7 +41,7 @@ typedef struct board_info {
#define PPC4xx_ONB_IO_VADDR 0u
#define PPC4xx_ONB_IO_SIZE 0u
-#define PPC4xx_MACHINE_NAME "Xilinx ML300"
+#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System"
#endif /* __ASM_XILINX_ML300_H__ */
#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 5ceb27b..ad9c0a8 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_440GX) += ibm440gx_common.
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
ifeq ($(CONFIG_4xx),y)
ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x) += xilinx_pic.o
+obj-$(CONFIG_40x) += xilinx_pic.o ppc_sys.o
else
ifeq ($(CONFIG_403),y)
obj-$(CONFIG_40x) += ppc403_pic.o
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
index 38416d7..d947610 100644
--- a/arch/ppc/syslib/xilinx_pic.c
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -119,14 +119,14 @@ ppc4xx_pic_init(void)
#error NR_IRQS > 32 not supported
#endif
-#if XPAR_XINTC_USE_DCR == 0
- intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
+#if VIRTEX_XINTC_USE_DCR == 0
+ intc = ioremap(VIRTEX_INTC_BASEADDR, 32);
printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
- (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
+ (unsigned long) VIRTEX_INTC_BASEADDR, (unsigned long) intc);
#else
printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
- (unsigned long) XPAR_INTC_0_BASEADDR);
+ (unsigned long) VIRTEX_INTC_BASEADDR);
#endif
/*
@@ -146,7 +146,7 @@ ppc4xx_pic_init(void)
for (i = 0; i < NR_IRQS; ++i) {
irq_desc[i].handler = &xilinx_intc;
- if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
+ if (VIRTEX_INTC_KIND_OF_INTR & (0x00000001 << i))
irq_desc[i].status &= ~IRQ_LEVEL;
else
irq_desc[i].status |= IRQ_LEVEL;
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 6/8] Migrate Xilinx Vertex support from the OCP bus to the platfom bus
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Migrate Xilinx Vertex support from the OCP bus to the platfom bus
infrastructure, and move board specific configuration out of virtex.[ch]
and into the xparameters.h wrapper.
This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.
Board specific XPAR values now get bound to common defines with a 'VIRTEX_'
prefix. That way, xparameters_*.h files may be vastly different, but they
can be wired up to use the same infrastructure.
This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*. The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices. Only the bootloader (or
ppcboot) will need xparameters directly.
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/boot/common/ns16550.c | 3 +
arch/ppc/boot/simple/embed_config.c | 3 +
arch/ppc/platforms/4xx/Kconfig | 5 -
arch/ppc/platforms/4xx/virtex.c | 98 +++++++++++-----------
arch/ppc/platforms/4xx/virtex.h | 88 +++-----------------
arch/ppc/platforms/4xx/xparameters/xparameters.h | 37 ++++++++
include/asm-ppc/ppc_sys.h | 2
7 files changed, 103 insertions(+), 133 deletions(-)
b595c216e3e1573a2374ea56ec9fbe82e5d71ce3
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
index 26818bb..4f00c93 100644
--- a/arch/ppc/boot/common/ns16550.c
+++ b/arch/ppc/boot/common/ns16550.c
@@ -8,6 +8,9 @@
#include <linux/serial_reg.h>
#include <asm/serial.h>
+#if defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
#include "nonstdio.h"
#include "serial.h"
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
index 491a691..df24202 100644
--- a/arch/ppc/boot/simple/embed_config.c
+++ b/arch/ppc/boot/simple/embed_config.c
@@ -21,6 +21,9 @@
#ifdef CONFIG_40x
#include <asm/io.h>
#endif
+#ifdef CONFIG_XILINX_VIRTEX
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
extern unsigned long timebase_period_ns;
/* For those boards that don't provide one.
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 7711d2a..266280c 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -161,11 +161,6 @@ config IBM_OCP
depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
default y
-config XILINX_OCP
- bool
- depends on XILINX_ML300
- default y
-
config IBM_EMAC4
bool
depends on 440GX || 440SP
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
index 1de7a27..27685f3 100644
--- a/arch/ppc/platforms/4xx/virtex.c
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -1,60 +1,58 @@
/*
* arch/ppc/platforms/4xx/virtex.c
*
- * Author: MontaVista Software, Inc.
- * source@mvista.com
+ * Virtex-II Pro & Virtex-4 FX common infrastructure
*
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * Maintainer: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright 2005 Secret Lab Technologies Ltd.
+ * Copyright 2005 General Dynamics Canada Ltd.
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*/
-#include <linux/config.h>
#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platform/4xx/virtex.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <asm/ppc_sys.h>
+#include <platforms/4xx/virtex.h>
+#include <platforms/4xx/xparameters/xparameters.h>
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 0,
- .paddr = XPAR_UARTNS550_0_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_1_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 1,
- .paddr = XPAR_UARTNS550_1_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_2_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 2,
- .paddr = XPAR_UARTNS550_2_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_3_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 3,
- .paddr = XPAR_UARTNS550_3_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif /* 4 */
-#endif /* 3 */
-#endif /* 2 */
-#endif /* 1 */
-#endif /* 0 */
- { .vendor = OCP_VENDOR_INVALID
+#define VIRTEX_UART(num) { \
+ .mapbase = VIRTEX_UART_##num##_BASEADDR + 3, \
+ .irq = VIRTEX_UART_##num##_IRQ, \
+ .iotype = UPIO_MEM, \
+ .uartclk = VIRTEX_UART_##num##_CLK, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ .regshift = 2, \
}
+
+struct plat_serial8250_port serial_platform_data[] = {
+#ifdef VIRTEX_UART_0_BASEADDR
+ VIRTEX_UART(0),
+#endif
+#ifdef VIRTEX_UART_1_BASEADDR
+ VIRTEX_UART(1),
+#endif
+#ifdef VIRTEX_UART_2_BASEADDR
+ VIRTEX_UART(2),
+#endif
+#ifdef VIRTEX_UART_3_BASEADDR
+ VIRTEX_UART(3),
+#endif
+ { }, /* terminated by empty record */
};
+
+struct platform_device ppc_sys_platform_devices[] = {
+ [VIRTEX_UART] = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = serial_platform_data,
+ },
+};
+
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
index 049c767..1a01b81 100644
--- a/arch/ppc/platforms/4xx/virtex.h
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -15,85 +15,21 @@
#ifndef __ASM_VIRTEX_H__
#define __ASM_VIRTEX_H__
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
/* serial defines */
-#define RS_TABLE_SIZE 4 /* change this and add more devices below
- if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets. In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
- ASYNC_BOOT_AUTOCONF, \
- .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS 4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS 3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS 2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS 1
-#else
-#define NR_SER_PORTS 0
-#endif
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS \
- ML300_UART0 \
- ML300_UART1 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS \
- ML300_UART1 \
- ML300_UART0 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#define DCRN_CPMFR_BASE 0
-
#include <asm/ibm405.h>
+/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
+#if !defined(BASE_BAUD)
+ #define BASE_BAUD (0) /* dummy value; not used */
+#endif
+
+/* Device type enumeration for platform bus definitions */
+#ifndef __ASSEMBLY__
+enum ppc_sys_devices {
+ VIRTEX_UART,
+};
+#endif
+
#endif /* __ASM_VIRTEX_H__ */
#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
index fe4eac6..26ee822 100644
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -1,7 +1,8 @@
/*
* include/asm-ppc/xparameters.h
*
- * This file includes the correct xparameters.h for the CONFIG'ed board
+ * This file includes the correct xparameters.h for the CONFIG'ed board plus
+ * fixups to translate board specific XPAR values to a common set of names
*
* Author: MontaVista Software, Inc.
* source@mvista.com
@@ -14,5 +15,37 @@
#include <linux/config.h>
#if defined(CONFIG_XILINX_ML300)
-#include <platforms/4xx/xparameters/xparameters_ml300.h>
+ #include "xparameters_ml300.h"
+
+ /* Serial ports; 0x1000 is added to base addr because 16550 IP core has
+ * an offset between base address and the standard registers. */
+ #define VIRTEX_UART_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR + 0x1000)
+ #define VIRTEX_UART_0_IRQ XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
+ #define VIRTEX_UART_0_CLK XPAR_XUARTNS550_CLOCK_HZ
+
+ #define VIRTEX_UART_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR + 0x1000)
+ #define VIRTEX_UART_1_IRQ XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR
+ #define VIRTEX_UART_1_CLK XPAR_XUARTNS550_CLOCK_HZ
+
+ /* Values for setting up interrupt controller */
+ #define VIRTEX_XINTC_USE_DCR XPAR_XINTC_USE_DCR
+ #define VIRTEX_INTC_BASEADDR XPAR_DCR_INTC_0_BASEADDR
+ #define VIRTEX_INTC_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
+
+#else
+ /* Add other board xparameter includes here before the #else */
+ #error No *_xparameters.h file included
+#endif
+
+#ifndef SERIAL_PORT_DFNS
+ /* zImage serial port definitions */
+ #define RS_TABLE_SIZE 1
+ #define SERIAL_PORT_DFNS { \
+ .baud_base = VIRTEX_UART_0_CLK/16, \
+ .irq = VIRTEX_UART_0_IRQ, \
+ .flags = ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)VIRTEX_UART_0_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
#endif
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
index 549f448..580ebf0 100644
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -33,6 +33,8 @@
#include <asm/mpc52xx.h>
#elif defined(CONFIG_MPC10X_BRIDGE)
#include <asm/mpc10x.h>
+#elif defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/virtex.h>
#else
#error "need definition of ppc_sys_devices"
#endif
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 5/8] defconfigs for Xilinx ML300 and ML403 reference designs
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
defconfigs for Xilinx ML300 and ML403 reference designs
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/configs/ml300_defconfig | 538 ++++++++++++++++++++++++++++++++++++++
arch/ppc/configs/ml403_defconfig | 538 ++++++++++++++++++++++++++++++++++++++
2 files changed, 1076 insertions(+), 0 deletions(-)
create mode 100644 arch/ppc/configs/ml300_defconfig
create mode 100644 arch/ppc/configs/ml403_defconfig
1350cd92b158225519cb3de83dad67bc18f9591a
diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig
new file mode 100644
index 0000000..83d2f87
--- /dev/null
+++ b/arch/ppc/configs/ml300_defconfig
@@ -0,0 +1,538 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14
+# Fri Dec 30 00:12:17 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# IBM 4xx options
+#
+# CONFIG_BUBINGA is not set
+# CONFIG_CPCI405 is not set
+# CONFIG_EP405 is not set
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+# CONFIG_SYCAMORE is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_ML300=y
+# CONFIG_XILINX_ML403 is not set
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_EMBEDDEDBOOT=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_LBD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# IBM 40x options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KGDB is not set
+CONFIG_XMON=y
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig
new file mode 100644
index 0000000..989b87b
--- /dev/null
+++ b/arch/ppc/configs/ml403_defconfig
@@ -0,0 +1,538 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14
+# Thu Dec 29 23:51:48 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# IBM 4xx options
+#
+# CONFIG_BUBINGA is not set
+# CONFIG_CPCI405 is not set
+# CONFIG_EP405 is not set
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+# CONFIG_SYCAMORE is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_ML300 is not set
+CONFIG_XILINX_ML403=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_EMBEDDEDBOOT=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_LBD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# IBM 40x options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KGDB is not set
+CONFIG_XMON=y
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 0/8] Migration to platform bus for Virtex devices
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
Here is a set of patches to:
- Migrate ML300 to the platform bus
- Decouple xparameters.h from the rest of the kernel in preparation of
flattened device tree. Ultimate goal is to remove xparameters from
kernel entirely and have the boot loader pass the details in.
- Add support for ML403 reference design
- Add defconfigs for both ML300 and ML403
I've only tested these on an ML403. Would somebody be able to test
these on an ML300? Comments?
Cheers,
g.
^ permalink raw reply
* [PATCH 1/8] Move xparameters.h into xilinx specific directory
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Move xparameters.h out of common include/asm-ppc into xilinx specific
platforms/4xx/xparameters directory.
This is preparing for work to remove xparameters from the dependancy tree
for most c files. xparam changes should not cause a recompile of the world
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/platforms/4xx/virtex-ii_pro.h | 2 +-
arch/ppc/platforms/4xx/xparameters/xparameters.h | 18 ++++++++++++++++++
arch/ppc/syslib/xilinx_pic.c | 2 +-
include/asm-ppc/xparameters.h | 18 ------------------
4 files changed, 20 insertions(+), 20 deletions(-)
create mode 100644 arch/ppc/platforms/4xx/xparameters/xparameters.h
delete mode 100644 include/asm-ppc/xparameters.h
b7877de00f68dcca5c595edf387ac314c888d5e8
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h
index 9014c48..026130c 100644
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.h
+++ b/arch/ppc/platforms/4xx/virtex-ii_pro.h
@@ -16,7 +16,7 @@
#define __ASM_VIRTEXIIPRO_H__
#include <linux/config.h>
-#include <asm/xparameters.h>
+#include <platforms/4xx/xparameters/xparameters.h>
/* serial defines */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
new file mode 100644
index 0000000..fe4eac6
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-ppc/xparameters.h
+ *
+ * This file includes the correct xparameters.h for the CONFIG'ed board
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms
+ * of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_XILINX_ML300)
+#include <platforms/4xx/xparameters/xparameters_ml300.h>
+#endif
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
index 2cbcad2..38416d7 100644
--- a/arch/ppc/syslib/xilinx_pic.c
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
-#include <asm/xparameters.h>
+#include <platforms/4xx/xparameters/xparameters.h>
#include <asm/ibm4xx.h>
/* No one else should require these constants, so define them locally here. */
diff --git a/include/asm-ppc/xparameters.h b/include/asm-ppc/xparameters.h
deleted file mode 100644
index fe4eac6..0000000
--- a/include/asm-ppc/xparameters.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-ppc/xparameters.h
- *
- * This file includes the correct xparameters.h for the CONFIG'ed board
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms
- * of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/config.h>
-
-#if defined(CONFIG_XILINX_ML300)
-#include <platforms/4xx/xparameters/xparameters_ml300.h>
-#endif
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 2/8] Add xparameters file for Xilinx ML403 reference design
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Add xparameters file for Xilinx ML403 evaluation board and reference
design.
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
.../platforms/4xx/xparameters/xparameters_ml403.h | 153 +++++++++++++++++++++++
1 files changed, 153 insertions(+), 0 deletions(-)
create mode 100644 arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
3562948bc3fe8b582ea3f4f21f0db891b8d46f33
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
new file mode 100644
index 0000000..9c2e0e8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
@@ -0,0 +1,153 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by libgen.
+* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1
+* DO NOT EDIT.
+*
+* Copyright (c) 2005 Xilinx, Inc. All rights reserved.
+*
+* Description: Driver parameters
+*
+*******************************************************************/
+
+#define STDIN_BASEADDRESS 0xA0000000
+#define STDOUT_BASEADDRESS 0xA0000000
+
+/******************************************************************/
+
+#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000
+#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
+
+/******************************************************************/
+
+#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000
+#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF
+#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000
+#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
+#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000
+#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF
+#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
+#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+#define XPAR_OPB_ETHERNET_0_CAM_EXIST 0
+#define XPAR_OPB_ETHERNET_0_JUMBO_EXIST 0
+
+/******************************************************************/
+
+#define XPAR_XUARTNS550_NUM_INSTANCES 1
+#define XPAR_XUARTNS550_CLOCK_HZ 100000000
+#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
+#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
+#define XPAR_OPB_UART16550_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XGPIO_NUM_INSTANCES 3
+#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
+#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
+#define XPAR_OPB_GPIO_0_DEVICE_ID 0
+#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_0_IS_DUAL 1
+#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000
+#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF
+#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1
+#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1
+#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000
+#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF
+#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2
+#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0
+
+/******************************************************************/
+
+#define XPAR_XPS2_NUM_INSTANCES 2
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
+
+/******************************************************************/
+
+#define XPAR_XIIC_NUM_INSTANCES 1
+#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
+#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
+#define XPAR_OPB_IIC_0_DEVICE_ID 0
+#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
+#define XPAR_OPB_IIC_0_GPO_WIDTH 1
+
+/******************************************************************/
+
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10
+#define XPAR_XINTC_HAS_IPR 1
+#define XPAR_XINTC_USE_DCR 0
+#define XPAR_XINTC_NUM_INSTANCES 1
+#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0
+#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF
+#define XPAR_OPB_INTC_0_DEVICE_ID 0
+#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
+
+/******************************************************************/
+
+#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0
+#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF
+#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
+#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001
+#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0
+#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002
+#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1
+#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004
+#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2
+#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008
+#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010
+#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020
+#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5
+#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040
+#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6
+#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080
+#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7
+#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100
+#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
+#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200
+#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9
+
+/******************************************************************/
+
+#define XPAR_XTFT_NUM_INSTANCES 1
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
+#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XSYSACE_MEM_WIDTH 16
+#define XPAR_XSYSACE_NUM_INSTANCES 1
+#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
+#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
+#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
+#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16
+
+/******************************************************************/
+
+#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
+
+/******************************************************************/
+
+#define XILFATFS_MAXFILES 5
+#define XILFATFS_BUFCACHE_SIZE 10240
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 3/8] Generalize Xilinx Virtex-II/IV support files
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX
FPGAs. This patch cleans up the Virtex naming convention to reflect more
than just the Virtex-II Pro.
Rename files virtex-ii_pro.[ch] to virtex.[ch]
Rename config value VIRTEX_II_PRO to XILINX_VIRTEX
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/platforms/4xx/Kconfig | 2 -
arch/ppc/platforms/4xx/Makefile | 2 -
arch/ppc/platforms/4xx/virtex-ii_pro.c | 60 -------------------
arch/ppc/platforms/4xx/virtex-ii_pro.h | 99 --------------------------------
arch/ppc/platforms/4xx/virtex.c | 60 +++++++++++++++++++
arch/ppc/platforms/4xx/virtex.h | 99 ++++++++++++++++++++++++++++++++
arch/ppc/platforms/4xx/xilinx_ml300.c | 2 -
arch/ppc/platforms/4xx/xilinx_ml300.h | 2 -
arch/ppc/syslib/Makefile | 2 -
9 files changed, 164 insertions(+), 164 deletions(-)
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.c
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.h
create mode 100644 arch/ppc/platforms/4xx/virtex.c
create mode 100644 arch/ppc/platforms/4xx/virtex.h
515b355e603129ac51da756f397365703a1742fd
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 76f4476..7711d2a 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -197,7 +197,7 @@ config 405GPR
depends on SYCAMORE
default y
-config VIRTEX_II_PRO
+config XILINX_VIRTEX
bool
depends on XILINX_ML300
default y
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 1dd6d7f..4db749d 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -24,4 +24,4 @@ obj-$(CONFIG_440GX) += ibm440gx.o
obj-$(CONFIG_440SP) += ibm440sp.o
obj-$(CONFIG_405EP) += ibm405ep.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
-obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o
+obj-$(CONFIG_XILINX_VIRTEX) += virtex.o
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c
deleted file mode 100644
index 097cc9d..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.c
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include "virtex-ii_pro.h"
-
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 0,
- .paddr = XPAR_UARTNS550_0_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_1_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 1,
- .paddr = XPAR_UARTNS550_1_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_2_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 2,
- .paddr = XPAR_UARTNS550_2_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_3_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 3,
- .paddr = XPAR_UARTNS550_3_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif /* 4 */
-#endif /* 3 */
-#endif /* 2 */
-#endif /* 1 */
-#endif /* 0 */
- { .vendor = OCP_VENDOR_INVALID
- }
-};
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h
deleted file mode 100644
index 026130c..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.h
- *
- * Include file that defines the Xilinx Virtex-II Pro processor
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEXIIPRO_H__
-#define __ASM_VIRTEXIIPRO_H__
-
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/* serial defines */
-
-#define RS_TABLE_SIZE 4 /* change this and add more devices below
- if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets. In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
- ASYNC_BOOT_AUTOCONF, \
- .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS 4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS 3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS 2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS 1
-#else
-#define NR_SER_PORTS 0
-#endif
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS \
- ML300_UART0 \
- ML300_UART1 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS \
- ML300_UART1 \
- ML300_UART0 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#define DCRN_CPMFR_BASE 0
-
-#include <asm/ibm405.h>
-
-#endif /* __ASM_VIRTEXIIPRO_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
new file mode 100644
index 0000000..1de7a27
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.c
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platform/4xx/virtex.h>
+
+/* Have OCP take care of the serial ports. */
+struct ocp_def core_ocp[] = {
+#ifdef XPAR_UARTNS550_0_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = XPAR_UARTNS550_0_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_1_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = XPAR_UARTNS550_1_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_2_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = XPAR_UARTNS550_2_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_3_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 3,
+ .paddr = XPAR_UARTNS550_3_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_4_BASEADDR
+#error Edit this file to add more devices.
+#endif /* 4 */
+#endif /* 3 */
+#endif /* 2 */
+#endif /* 1 */
+#endif /* 0 */
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
new file mode 100644
index 0000000..049c767
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -0,0 +1,99 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.h
+ *
+ * Include file that defines the Xilinx Virtex-II Pro processor
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_VIRTEX_H__
+#define __ASM_VIRTEX_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+/* serial defines */
+
+#define RS_TABLE_SIZE 4 /* change this and add more devices below
+ if you have more then 4 16x50 UARTs */
+
+#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
+
+/* The serial ports in the Virtex-II Pro have each I/O byte in the
+ * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
+ * change the byte offsets into word offsets. In addition the base
+ * addresses need to have 3 added to them to get to the LSByte.
+ */
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+ ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM},
+
+#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define ML300_UART0 STD_UART_OP(0)
+#else
+#define ML300_UART0
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define ML300_UART1 STD_UART_OP(1)
+#else
+#define ML300_UART1
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define ML300_UART2 STD_UART_OP(2)
+#else
+#define ML300_UART2
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define ML300_UART3 STD_UART_OP(3)
+#else
+#define ML300_UART3
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
+#error Edit this file to add more devices.
+#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define NR_SER_PORTS 4
+#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define NR_SER_PORTS 3
+#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define NR_SER_PORTS 2
+#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define NR_SER_PORTS 1
+#else
+#define NR_SER_PORTS 0
+#endif
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_PORT_DFNS \
+ ML300_UART0 \
+ ML300_UART1 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_PORT_DFNS \
+ ML300_UART1 \
+ ML300_UART0 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#define DCRN_CPMFR_BASE 0
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_VIRTEX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index 0b1b77d..b0de0a2 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -22,7 +22,7 @@
#include <asm/machdep.h>
#include <asm/ocp.h>
-#include <platforms/4xx/virtex-ii_pro.h> /* for NR_SER_PORTS */
+#include <platforms/4xx/virtex.h> /* for NR_SER_PORTS */
/*
* As an overview of how the following functions (platform_init,
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
index f8c5884..8993981 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -16,7 +16,7 @@
#define __ASM_XILINX_ML300_H__
/* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex-ii_pro.h>
+#include <platforms/4xx/virtex.h>
#ifndef __ASSEMBLY__
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b8d08f3..5ceb27b 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_440GP) += ibm440gp_common.
obj-$(CONFIG_440GX) += ibm440gx_common.o
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_VIRTEX_II_PRO),y)
+ifeq ($(CONFIG_XILINX_VIRTEX),y)
obj-$(CONFIG_40x) += xilinx_pic.o
else
ifeq ($(CONFIG_403),y)
--
1.0.6-g58e3
^ permalink raw reply related
* [PATCH 4/8] Add Virtex-4 FX to cpu table
From: Grant Likely @ 2005-12-30 10:29 UTC (permalink / raw)
To: mporter, linuxppc-embedded
In-Reply-To: <11359385973413-git-send-email-grant.likely@secretlab.ca>
Add Virtex-4 FX to cpu table
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/kernel/cputable.c | 13 ++++++++++++-
1 files changed, 12 insertions(+), 1 deletions(-)
e42625e6e14442f0b315699d872ccc4cc3d4d49d
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
index 6b76cf5..7f3faf1 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -859,7 +859,7 @@ struct cpu_spec cpu_specs[] = {
.dcache_bsize = 32,
},
{ /* Xilinx Virtex-II Pro */
- .pvr_mask = 0xffff0000,
+ .pvr_mask = 0xfffff000,
.pvr_value = 0x20010000,
.cpu_name = "Virtex-II Pro",
.cpu_features = CPU_FTR_SPLIT_ID_CACHE |
@@ -869,6 +869,17 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
},
+ { /* Xilinx Virtex-4 */
+ .pvr_mask = 0xfffff000,
+ .pvr_value = 0x20011000,
+ .cpu_name = "Virtex-4 FX",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ },
{ /* 405EP */
.pvr_mask = 0xffff0000,
.pvr_value = 0x51210000,
--
1.0.6-g58e3
^ permalink raw reply related
* BDI2000
From: Mustafa Çayır @ 2005-12-30 11:43 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 68 bytes --]
hi,
Anyone has BDI2000 config file for mvme6100 ?
best regards
[-- Attachment #2: Type: text/html, Size: 498 bytes --]
^ permalink raw reply
* Regarding booting 440 gr board / ibm emac driver
From: Kiran Kumar.A @ 2005-12-30 11:21 UTC (permalink / raw)
To: benh; +Cc: linuxppc-embedded
Hello Benjamin,
This is kiran here. I'm working on 440GR (Yosemite) board to boot linux-2.6=
.13.4.
Everything works fine execpt for MAC address. I saw the code in arch/ppc/pl=
atforms/4xx/yosemite.c; the code to copy the MAC addr from board info struc=
ture seems to be in place. I am using IBM emac driver written by you.
Linux boots up fine and in the booting messages , I see that the MAC addr =
is displayed as all zeroes. Also, the ifconfig displays the MAC address as =
all zeroes.=20=20
Could you please throw some light on the same.=20
What could be the issue? Do we need to modify the driver for MAC address is=
sue??
regards,
kiran
--=20
_______________________________________________
Search for businesses by name, location, or phone number. -Lycos Yellow Pa=
ges
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.as=
p?SRC=3Dlycos10
^ permalink raw reply
* AW: [Socket-can] Re: Which CAN driver to port to for PPC
From: Hartkopp, Oliver (K-GEFE/E) @ 2005-12-30 18:00 UTC (permalink / raw)
To: The Linux Socket CAN Framework
Cc: David Jander, Thuermann, Urs, Dr. (K-GEFE/I), linuxppc-embedded,
'Jan Kiszka'
Hi all,
> Robert Schwebel wrote:
> > ...
> > In december, we have made a synchronisation meeting with the VW people
> > who made the initial port for 2.4; they are more focussed on having
> > higher level transport protocols ontop of the "raw" socket interface we
> > currently use. During that process we have reviewed the user interface
> > with regard to their use cases, so it will have to be changed a little
> > bit before we have something which is in a state to be posted on lkml.
> >
To be more correctly: Our focus is more on content-filtering of cyclic
sent and received CAN-messages as well as on CAN-transport-protocols
like ISO-TP (where two CAN-IDs are used to implement a point-to-point
connection via the CAN-Bus by segmenting long (means >8 Byte) PDUs).
The transport protocols and the so called "Broadcast-Manager" (for
content-filtering, cyclic sending, RTR-Handling, Timeout-Handling) are
not ontop the RAW-socket but arranged /next/ to the CAN_RAW-protocol in
the protocol-family PF_CAN. You may find a picture of this 'arrangement'
in the first hit of 'PF_CAN' in google (sorry it's german - figure page 5):
http://www.network-on-wheels.de/downloads/VDE2004_Luebke_Paper.pdf
As we had some problems to publish our software, we shared our ideas with
Robert, Jan and Benedikt who have been working on the same problems in 2004.
We are now bringing our implementations and APIs together, to publish a
real Kernel-proof implementation for PF_CAN. Fortunately our implementations
do not differ in core-things so it's just a bit cosmetic on both sides.
Btw. VW has a Kernel 2.4 implementation and Robert and Benedikt have a
Kernel 2.6 port - so it becomes a win-win-situation for both sides ... :-)
> Jan Kiszka wrote:
>
> Beyond the outstanding comparably minor API adjustments, we furthermore
> discussed first ideas how to define the lowest interface, i.e. the CAN
> network device layer. That should be done in a way which makes porting
> CAN low-level drivers between the standard kernel and a real-time Linux
> CAN stack trivial. That's a unique chance (compared to the situation of
> RTnet e.g.), so we should take it.
>
> (..) This means we could end up with portable CAN
> applications and drivers, RT and non-RT!
>
As the RTDM and a 'standard'-netdevice are quite similar (in opposite to
the former used char-devices for CAN-drivers) it should be quite easy to
create some kind of CAN-HW-abstraction layer to fit the bare controller
access into a netdevice and respectively a RTDM-device. As both sides
currently support various CAN-controllers this is a really good chance
to bring not only the socket-API (for the user software) but the low
level can driver API (for the driver developer) together.
> As Robert said, it "just" requires some resources for implementing
> this... ;)
I'm looking forward to create this CAN-HW-abstraction layer with Jan and
Robert, as i assume the required ressources to be melting down after a
initial work that is done together in the approved way. After this is
defined, it shall be very easy for driver developers to make their CAN-HW
work as netdevice / RTDM-device. So every work is just done once.
Finally i wish you a happy new year in advance! May 2006 be the year of
excellent
(and settled) CAN-concepts inside the Linux kernel for all of us ;-)
Best regards,
Oliver
^ permalink raw reply
* powerpc.git broken for ARCH=ppc
From: Kumar Gala @ 2005-12-30 18:17 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev list
Ben,
It looks like you broke ARCH=ppc builds:
arch/ppc/kernel/time.c: In function `wakeup_decrementer':
arch/ppc/kernel/time.c:125: warning: implicit declaration of function
`last_jiffy_stamp'
arch/ppc/kernel/time.c:125: error: invalid lvalue in assignment
arch/ppc/kernel/time.c: In function `timer_interrupt':
arch/ppc/kernel/time.c:189: error: invalid lvalue in assignment
arch/ppc/kernel/time.c: In function `time_init':
arch/ppc/kernel/time.c:331: error: invalid lvalue in assignment
In asm-powerpc/hardirq.h you removed the defn of last_jiffy_stamp.
Suggestions on what the right fix is for arch=ppc?
- kumar
^ permalink raw reply
* Re: Regarding booting 440 gr board / ibm emac driver
From: Eugene Surovegin @ 2005-12-30 18:36 UTC (permalink / raw)
To: Kiran Kumar.A; +Cc: linuxppc-embedded
In-Reply-To: <20051230112111.58191CA092@ws7-4.us4.outblaze.com>
On Fri, Dec 30, 2005 at 06:21:11AM -0500, Kiran Kumar.A wrote:
> Hello Benjamin,
> This is kiran here. I'm working on 440GR (Yosemite) board to boot linux-2.6.13.4.
> Everything works fine execpt for MAC address. I saw the code in arch/ppc/platforms/4xx/yosemite.c; the code to copy the MAC addr from board info structure seems to be in place. I am using IBM emac driver written by you.
> Linux boots up fine and in the booting messages , I see that the MAC addr is displayed as all zeroes. Also, the ifconfig displays the MAC address as all zeroes.
>
> Could you please throw some light on the same.
First, check that the code which copies MAC address is actually
executed. Second, check _what_ is being copied by this code. Maybe
board info structure contains zeros.
> Do we need to modify the driver for MAC address issue??
No, you don't need to modify EMAC driver.
--
Eugene
^ permalink raw reply
* Re: powerpc.git broken for ARCH=ppc
From: Olof Johansson @ 2005-12-30 20:40 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev list
In-Reply-To: <D5FE4784-0908-4A8E-9231-D1741F5592DF@kernel.crashing.org>
On Fri, Dec 30, 2005 at 12:17:56PM -0600, Kumar Gala wrote:
> Ben,
>
> It looks like you broke ARCH=ppc builds:
>
> arch/ppc/kernel/time.c: In function `wakeup_decrementer':
> arch/ppc/kernel/time.c:125: warning: implicit declaration of function
> `last_jiffy_stamp'
> arch/ppc/kernel/time.c:125: error: invalid lvalue in assignment
> arch/ppc/kernel/time.c: In function `timer_interrupt':
> arch/ppc/kernel/time.c:189: error: invalid lvalue in assignment
> arch/ppc/kernel/time.c: In function `time_init':
> arch/ppc/kernel/time.c:331: error: invalid lvalue in assignment
>
> In asm-powerpc/hardirq.h you removed the defn of last_jiffy_stamp.
> Suggestions on what the right fix is for arch=ppc?
Hmm, it's pretty annoying that cleanups and chances of powerpc can break
ppc. How much of asm-powerpc is pulled into an ARCH=ppc build?
-Olof
^ permalink raw reply
* Re: [Socket-can] Re: Which CAN driver to port to for PPC
From: Robert Schwebel @ 2005-12-30 21:10 UTC (permalink / raw)
To: The Linux Socket CAN Framework
Cc: linuxppc-embedded, David Jander, Thuermann, Urs, Dr. (K-GEFE/I)
In-Reply-To: <0BC6CCCB3D723E468B124BF3115CC912361D2E@vwagwox00010.vw.vwg>
Hi Oliver,
On Fri, Dec 30, 2005 at 07:00:54PM +0100, Hartkopp, Oliver (K-GEFE/E)
wrote:
> > As Robert said, it "just" requires some resources for implementing
> > this... ;)
>
> I'm looking forward to create this CAN-HW-abstraction layer with Jan
> and Robert, as i assume the required ressources to be melting down
> after a initial work that is done together in the approved way. After
> this is defined, it shall be very easy for driver developers to make
> their CAN-HW work as netdevice / RTDM-device. So every work is just
> done once.
Writing device drivers will be easy - Sascha has done drivers for
SJA1000 based boards in less than a day and for completely new and
braindamaged chips in less than a week.
The _real_ work will be on the infrastructure side; to be useful for a
wider audience the existing code has to be forward ported to the latest
2.6 trees and it has to be ported to use modern kernel techniques; even
our 2.6 code suffers a bit from it's history and doesn't use all the
mechanisms the kernel offers today.
We surely could do this, especially Marc and Sascha have quite some
experience with CAN and the network stack, but as always the rule is
that paying customers come first. So as long as there is nobody
sponsoring this project we will work on it only in our sparetime.
> Finally i wish you a happy new year in advance! May 2006 be the year
> of excellent (and settled) CAN-concepts inside the Linux kernel for
> all of us ;-)
Let's hope this! :-)
Robert
--
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Hannoversche Str. 2, 31134 Hildesheim, Germany
Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9
^ permalink raw reply
* Re: eldk bug?how to fix
From: Wolfgang Denk @ 2005-12-30 21:13 UTC (permalink / raw)
To: Theo Gjaltema; +Cc: linuxppc-embedded
In-Reply-To: <43B459C5.1060206@chello.nl>
In message <43B459C5.1060206@chello.nl> you wrote:
>
> I've seen these messages before. They were gone when I compiled using
> ppc_8xx-gcc compiler of a different ELDK version.
> What version of ELDK are you using? Which gcc version?
This has nothing to do with ELDK versions, or any other toolchain
issues.
> >[root@localhost atmlz]# ppc_6xx-gcc -c -o temp atm_aalx.c
> >atm_aalx.c: In function `main':
> >atm_aalx.c:201: warning: return type of `main' is not `int'
> >/tmp/cciJlehe.s: Assembler messages:
> >/tmp/cciJlehe.s:916: Error: unsupported relocation against r3
...
> > mfmsr r3
> > ori r3,r3,0x8000
> > andi. r3,r3,0xffbf
> > mtmsr r3
It's a user only problem (using symbolic names like "r3" in inline
assember statements without incuding the proper header files to
resolve thise names).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
We fight only when there is no other choice. We prefer the ways of
peaceful contact.
-- Kirk, "Spectre of the Gun", stardate 4385.3
^ permalink raw reply
* Re: Regarding booting 440 gr board / ibm emac driver
From: Wolfgang Denk @ 2005-12-30 21:17 UTC (permalink / raw)
To: Kiran Kumar.A; +Cc: linuxppc-embedded
In-Reply-To: <20051230112111.58191CA092@ws7-4.us4.outblaze.com>
In message <20051230112111.58191CA092@ws7-4.us4.outblaze.com> you wrote:
>
> This is kiran here. I'm working on 440GR (Yosemite) board to boot linux-2.6
> .13.4.
Don't use old code. Please use the current version.
> What could be the issue? Do we need to modify the driver for MAC address is
> sue??
Just use current code. You can find ready to run binaries and the
corresponding sources (git repository) on our server:
ftp://ftp.denx.de/pub/u-boot/images/amcc/yosemite/u-boot.bin
ftp://ftp.denx.de/pub/linux/images/amcc/yosemite/uImage
and http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
(git tag "DENX-2005-12-03-2208" or later).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
A Puritan is someone who is deathly afraid that someone, somewhere,
is having fun.
^ permalink raw reply
* Re: [PATCH 8/8] Add support for Xilinx ML403 reference design
From: Grant Likely @ 2005-12-31 3:58 UTC (permalink / raw)
To: David H. Lynch Jr., linuxppc-embedded
In-Reply-To: <43B5E37A.4020008@dlasys.net>
David H. Lynch Jr. wrote:
> I am working on a port of 2.6.14.5 to the Pico E-12 which is a Xilinx
> Virtex-IV system in a CF card. It is very similar to the ML403 but with
> alot less hardware. I would love to be able to pull a whole tree of the
> stuff you are working on - is there a git, svn, or cvs tree that the
> linuxppc-embedded patches are getting merged into ? and How can it be
> accessed ?
I don't have a public git tree at the moment for the xilinx virtex
stuff. I can certainly create and maintain one if there is demand. I
guess it depends on how many people want to colaborate on V2Pro/V4
support. Anyone else interested?
> Right now I am trying to get /init to run - actually it runs but I am
> not getting IO on the console. Anyway, I hope to put out a collection of
> patches when I have it really working. Aside from the Pico e-12 itself,
> I have Uartlite drivers that are consistent with the way the rest of the
> 2.6 serial drivers are layed out as well as a custom serial driver
> specific to the E-12. The E-12 stuff might not make it into the
> distribution kernel, but I would think there might be some interest in
> the UartLite driver.
Since the E-12 is a commercially available board, it would be useful to
have the patches on the ML, even if they don't get applied to mainline.
>
> Anyway it would be nice to work against whatever all the
> linuxppc-embedded patches are going into.
I'm working off the mainline linux-2.6 tree from kernel.org. PPC
patches are getting merged into mainline frequently.
Cheers,
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 663-0761
^ permalink raw reply
* Re: Howto submit drivers/patches ?
From: Grant Likely @ 2005-12-31 4:02 UTC (permalink / raw)
To: David H. Lynch Jr.; +Cc: linuxppc-embedded
In-Reply-To: <43A64446.8080109@comcast.net>
David H. Lynch Jr. wrote:
> I am just polishing off bringup a Xilinx Virtex IV/ppc405 system with
> minimal hardware under 2.6.14.4.
> I have a collection of patches that I can submit for the specific,
> board, for the Virtex IV, for board specific hardware, ...
> Additionally I have 2 complete boot loader through full serial driver
> implementations of a pseudo serial console driver for this board when it
> is in a HOST development system - it is a compact flash card normally
> plugged into a PC during development and using the PC as the console,
> and a complete serial driver chain for the Xilinx UartLite as a console
> when not in a Host, or as a general serial driver. The Xilinx Driver is
> based heavily on other 2.6 driver/serial drivers and not the 2.4
> implementation from Xilinx.
>
> Is this list the right place to submit this ?
> Is there a HOWTO addressing the rules/procedures to do so.
Do you want to send me your patches for the UartLite (and cc the list)?
I'd be happy to take a look. What other things did you change?
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
(403) 663-0761
^ permalink raw reply
* tftp
From: bharathi kandimalla @ 2005-12-31 7:12 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 1209 bytes --]
Hi
I am working on the MPC860T .I am able to port the linux2.6 on to the board.I got prompt. eventhough I have enabled the tftp I am not able to get the files using tftp
from the host machine
fconfig
eth0 Link encap:Ethernet HWaddr 9A:52:63:15:85:25
inet addr:192.168.3.2 Bcast:192.168.3.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:512 (512.0 B) TX bytes:0 (0.0 B)
Base address:0xe00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[root@(none) ~]# tftp
-sh: tftp: command not found
please help me out
regards
bharathi
---------------------------------
Yahoo! DSL Something to write home about. Just $16.99/mo. or less
[-- Attachment #2: Type: text/html, Size: 2402 bytes --]
^ permalink raw reply
* Re: tftp
From: Wolfgang Denk @ 2005-12-31 10:35 UTC (permalink / raw)
To: bharathi kandimalla; +Cc: linuxppc-embedded
In-Reply-To: <20051231071231.54555.qmail@web50008.mail.yahoo.com>
In message <20051231071231.54555.qmail@web50008.mail.yahoo.com> you wrote:
>
> I am working on the MPC860T .I am able to port the linux2.6 on to the board.I got prompt. eventhough I have enabled the tftp I am not able to get the files using tftp
> from the host machine
...
> [root@(none) ~]# tftp
> -sh: tftp: command not found
"command not found" - this is a pretty clear error message. Try
installing the tftp command on your target system ...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
An optimist believes we live in the best world possible; a pessimist
fears this is true.
^ permalink raw reply
* Re: Migrate vxworks bsp to linux
From: Esben Nielsen @ 2005-12-31 10:55 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: siman, linuxppc-embedded
In-Reply-To: <20051230081049.2C117352ADF@atlas.denx.de>
On Fri, 30 Dec 2005, Wolfgang Denk wrote:
> In message <001301c60ce8$7b4456a0$1200a8c0@xbh> you wrote:
> >
> > I have the prpmc610 borad(with MPC8245), I have the board's vxworks bsp, did
> > anybody have experience to migrate from the vxworks to Linux system? I
> > think the main problem is initial the boards.
>
> You start porting a boot loader, like U-Boot.
To see if I could get Linux to run on our MPC5200 board I politely asked
the vxWorks bootloader to boot the Linux kernel via ftp. It worked. I used
the Denx kernel for the Lite5200. I had to compile the kernel with good
default parameters (ip address, nfsroot, serial setup etc.) as I couldn't
make the vxWorks bootsector parse kernel parameters. It was a good and
very easy way to demonstrate that Linux could run on our board.
Esben
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering: Embedded and Realtime Systems, Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
> As far as the laws of mathematics refer to reality, they are not
> certain; and as far as they are certain, they do not refer to
> reality. -- Albert Einstein
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
^ permalink raw reply
* Re: Regarding booting 440 gr board / ibm emac driver
From: Stefan Roese @ 2005-12-31 12:14 UTC (permalink / raw)
To: linuxppc-embedded; +Cc: Kiran Kumar.A
In-Reply-To: <20051230211710.72899352597@atlas.denx.de>
On Friday 30 December 2005 22:17, Wolfgang Denk wrote:
> In message <20051230112111.58191CA092@ws7-4.us4.outblaze.com> you wrote:
> > This is kiran here. I'm working on 440GR (Yosemite) board to boot
> > linux-2.6 .13.4.
>
> Don't use old code. Please use the current version.
>
> > What could be the issue? Do we need to modify the driver for MAC address
> > is sue??
>
> Just use current code. You can find ready to run binaries and the
> corresponding sources (git repository) on our server:
>
> ftp://ftp.denx.de/pub/u-boot/images/amcc/yosemite/u-boot.bin
> ftp://ftp.denx.de/pub/linux/images/amcc/yosemite/uImage
> and http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
> (git tag "DENX-2005-12-03-2208" or later).
Just a quick note, since you mentioned using 440GR (Yosemite): Yosemite is the
eval board for the 440EP and Yellowstone is the eval board for the 440GR.
Images for both boards are available at the site referenced by Wolfgang.
Best regards,
Stefan
^ permalink raw reply
* Re: [PATCH/RFC?] usb/input: Add support for fn key on Apple PowerBooks
From: Michael Hanselmann @ 2005-12-31 23:51 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: linux-kernel, linux-kernel, linuxppc-dev, Vojtech Pavlik,
linux-input
In-Reply-To: <200512252304.32830.dtor_core@ameritech.net>
On Sun, Dec 25, 2005 at 11:04:30PM -0500, Dmitry Torokhov wrote:
> Well, we have used 11 out of 32 available bits so there still some
> reserves. My concern is that your implementation allows only one
> hook to be installed while with quirks you can have several of them
> active per device.
Below you find an implementation using quirks:
---
diff -rNup linux-2.6.15-rc7.orig/drivers/usb/input/hid-core.c linux-2.6.15-rc7/drivers/usb/input/hid-core.c
--- linux-2.6.15-rc7.orig/drivers/usb/input/hid-core.c 2006-01-01 00:41:15.000000000 +0100
+++ linux-2.6.15-rc7/drivers/usb/input/hid-core.c 2005-12-31 22:39:53.000000000 +0100
@@ -1580,6 +1580,10 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
+ { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN },
+
{ 0, 0 }
};
diff -rNup linux-2.6.15-rc7.orig/drivers/usb/input/hid-input.c linux-2.6.15-rc7/drivers/usb/input/hid-input.c
--- linux-2.6.15-rc7.orig/drivers/usb/input/hid-input.c 2006-01-01 00:41:15.000000000 +0100
+++ linux-2.6.15-rc7/drivers/usb/input/hid-input.c 2005-12-31 23:49:42.000000000 +0100
@@ -63,6 +63,66 @@ static struct {
__s32 y;
} hid_hat_to_axis[] = {{ 0, 0}, { 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}};
+struct input_pb_translation {
+ u16 from;
+ u16 to;
+ u8 flags;
+};
+
+#define POWERBOOK_FLAG_FKEY 0x01
+
+static struct input_pb_translation powerbook_fn_keys[] = {
+ { KEY_BACKSPACE, KEY_DELETE },
+ { KEY_F1, KEY_BRIGHTNESSDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F2, KEY_BRIGHTNESSUP, POWERBOOK_FLAG_FKEY },
+ { KEY_F3, KEY_MUTE, POWERBOOK_FLAG_FKEY },
+ { KEY_F4, KEY_VOLUMEDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F5, KEY_VOLUMEUP, POWERBOOK_FLAG_FKEY },
+ { KEY_F6, KEY_NUMLOCK, POWERBOOK_FLAG_FKEY },
+ { KEY_F7, KEY_SWITCHVIDEOMODE, POWERBOOK_FLAG_FKEY },
+ { KEY_F8, KEY_KBDILLUMTOGGLE, POWERBOOK_FLAG_FKEY },
+ { KEY_F9, KEY_KBDILLUMDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F10, KEY_KBDILLUMUP, POWERBOOK_FLAG_FKEY },
+ { KEY_UP, KEY_PAGEUP },
+ { KEY_DOWN, KEY_PAGEDOWN },
+ { KEY_LEFT, KEY_HOME },
+ { KEY_RIGHT, KEY_END },
+ { }
+};
+
+static struct input_pb_translation powerbook_numlock_keys[] = {
+ { KEY_J, KEY_KP1 },
+ { KEY_K, KEY_KP2 },
+ { KEY_L, KEY_KP3 },
+ { KEY_U, KEY_KP4 },
+ { KEY_I, KEY_KP5 },
+ { KEY_O, KEY_KP6 },
+ { KEY_7, KEY_KP7 },
+ { KEY_8, KEY_KP8 },
+ { KEY_9, KEY_KP9 },
+ { KEY_M, KEY_KP0 },
+ { KEY_DOT, KEY_KPDOT },
+ { KEY_SLASH, KEY_KPPLUS },
+ { KEY_SEMICOLON, KEY_KPMINUS },
+ { KEY_P, KEY_KPASTERISK },
+ { KEY_MINUS, KEY_KPEQUAL },
+ { KEY_0, KEY_KPSLASH },
+ { KEY_ENTER, KEY_KPENTER },
+ { }
+};
+
+static int powerbook_fkeysfirst = 1;
+module_param_named(pb_fkeysfirst, powerbook_fkeysfirst, bool, 0644);
+MODULE_PARM_DESC(powerbook_fkeysfirst, "Use fn special keys only while pressing fn");
+
+static int powerbook_enablefnkeys = 1;
+module_param_named(pb_enablefnkeys, powerbook_enablefnkeys, bool, 0644);
+MODULE_PARM_DESC(powerbook_enablefnkeys, "Enable fn special keys");
+
+static int powerbook_enablekeypad = 1;
+module_param_named(pb_enablekeypad, powerbook_enablekeypad, bool, 0644);
+MODULE_PARM_DESC(powerbook_enablekeypad, "Enable keypad keys");
+
#define map_abs(c) do { usage->code = c; usage->type = EV_ABS; bit = input->absbit; max = ABS_MAX; } while (0)
#define map_rel(c) do { usage->code = c; usage->type = EV_REL; bit = input->relbit; max = REL_MAX; } while (0)
#define map_key(c) do { usage->code = c; usage->type = EV_KEY; bit = input->keybit; max = KEY_MAX; } while (0)
@@ -73,6 +133,17 @@ static struct {
#define map_key_clear(c) do { map_key(c); clear_bit(c, bit); } while (0)
#define map_ff_effect(c) do { set_bit(c, input->ffbit); } while (0)
+static inline struct input_pb_translation *find_translation(
+ struct input_pb_translation *table, int from)
+{
+ struct input_pb_translation *trans;
+
+ /* Look for the translation */
+ for(trans = table; trans->from && !(trans->from == from); trans++);
+
+ return (trans->from?trans:NULL);
+}
+
static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field,
struct hid_usage *usage)
{
@@ -94,7 +165,7 @@ static void hidinput_configure_usage(str
switch (usage->hid & HID_USAGE_PAGE) {
- case HID_UP_UNDEFINED:
+ case HID_UP_UNDEFINED:
goto ignore;
case HID_UP_KEYBOARD:
@@ -325,7 +396,25 @@ static void hidinput_configure_usage(str
set_bit(EV_REP, input->evbit);
switch(usage->hid & HID_USAGE) {
- case 0x003: map_key_clear(KEY_FN); break;
+ /* The fn key on Apple PowerBooks */
+ case 0x0003: {
+ struct input_pb_translation *trans;
+
+ map_key_clear(KEY_FN);
+
+ set_bit(KEY_FN, input->keybit);
+ set_bit(KEY_NUMLOCK, input->keybit);
+
+ /* Enable all needed keys */
+ for(trans = powerbook_fn_keys; trans->from; trans++)
+ set_bit(trans->to, input->keybit);
+
+ for(trans = powerbook_numlock_keys; trans->from; trans++)
+ set_bit(trans->to, input->keybit);
+
+ goto ignore;
+ }
+
default: goto ignore;
}
break;
@@ -482,6 +571,49 @@ void hidinput_hid_event(struct hid_devic
return;
}
+ if (hid->quirks & HID_QUIRK_POWERBOOK_HAS_FN) {
+ struct input_pb_translation *trans;
+
+ switch(usage->code) {
+ case KEY_FN:
+ if (value) hid->quirks |= HID_QUIRK_POWERBOOK_FN_ON;
+ else hid->quirks &= ~HID_QUIRK_POWERBOOK_FN_ON;
+
+ input_event(input, usage->type, usage->code, value);
+
+ return;
+ }
+
+ if (powerbook_enablefnkeys) {
+ trans = find_translation(powerbook_fn_keys, usage->code);
+
+ if (trans) {
+ int known_key;
+
+ if (trans->flags & POWERBOOK_FLAG_FKEY)
+ known_key =
+ ( powerbook_fkeysfirst && (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)) ||
+ (!powerbook_fkeysfirst && !(hid->quirks & HID_QUIRK_POWERBOOK_FN_ON));
+ else
+ known_key = (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON);
+
+ if (known_key) {
+ input_event(input, usage->type, trans->to, value);
+ return;
+ }
+ }
+ }
+
+ if (powerbook_enablekeypad && test_bit(LED_NUML, input->led)) {
+ trans = find_translation(powerbook_numlock_keys, usage->code);
+
+ if (trans)
+ input_event(input, usage->type, trans->to, value);
+
+ return;
+ }
+ }
+
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
int hat_dir = usage->hat_dir;
if (!hat_dir)
diff -rNup linux-2.6.15-rc7.orig/drivers/usb/input/hid.h linux-2.6.15-rc7/drivers/usb/input/hid.h
--- linux-2.6.15-rc7.orig/drivers/usb/input/hid.h 2006-01-01 00:41:15.000000000 +0100
+++ linux-2.6.15-rc7/drivers/usb/input/hid.h 2005-12-31 22:39:49.000000000 +0100
@@ -246,6 +246,9 @@ struct hid_item {
#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x100
#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x200
#define HID_QUIRK_2WHEEL_POWERMOUSE 0x400
+#define HID_QUIRK_POWERBOOK_HAS_FN 0x0000800
+#define HID_QUIRK_POWERBOOK_FN_ON 0x0001000
+#define HID_QUIRK_POWERBOOK_NUMLOCK_ON 0x0002000
/*
* This is the global environment of the parser. This information is
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox