* Load average 1.0 on idle machine
From: Juergen Kreileder @ 2006-05-13 22:56 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 182 bytes --]
Hi,
with both 2.6.16.11 and 2.6.17-rc4 my PowerMac G5 Quad shows a load
average of 1.0 when the machine is completely idle (just kernel, init,
and bash running).
Juergen
[-- Attachment #2: config-2.6.17-rc4 --]
[-- Type: text/plain, Size: 31755 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc4
# Sun May 14 00:24:02 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
CONFIG_GENERIC_TBSYNC=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_PMAC64=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
# CONFIG_IEEE80211_CRYPT_WEP is not set
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
# CONFIG_WINDFARM_PM81 is not set
# CONFIG_WINDFARM_PM91 is not set
CONFIG_WINDFARM_PM112=y
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
# CONFIG_SND_POWERMAC is not set
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
[-- Attachment #3: Type: text/plain, Size: 76 bytes --]
--
Juergen Kreileder, Blackdown Java-Linux Team
http://blog.blackdown.de/
^ permalink raw reply
* Re: how to mount /dev/ram0 to /
From: Wolfgang Denk @ 2006-05-13 13:47 UTC (permalink / raw)
To: tony; +Cc: linuxppc-embedded
In-Reply-To: <44657B5A.00FD1A.21222>
In message <44657B5A.00FD1A.21222> you wrote:
>
> >Probably no part of your rc scripts did anything with the information
> >in /etc/fstab ...
> ------------------------>>
> but,isn't it auto excuted?
Who should "auto execute" it if not one of your rc scripts???
("execute" being a bad term, as the file is neither an executable
itself not any kind of script - it's just a config file).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Alles Gescheite ist schon gedacht worden, man muß nur versuchen,
es noch einmal zu denken. -- Goethe, Maximen und Reflexionen
^ permalink raw reply
* board without RTC
From: Joachim Denil @ 2006-05-13 13:10 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 855 bytes --]
Hello,
Can someone tell me what the following functions should do in case there is
no RTC on the hardware board. My processor is a 405gpr. Which of these i
must implement. (maybe some code snippets...). I think the most important
one is calibrate_decr for it is necesary to calibrate_delay function.
Thanks...
Joachim Denil
Student
long (*time_init <http://lxr.linux.no/ident?a=ppc;i=time_init>)(void);
int (*set_rtc_time <http://lxr.linux.no/ident?a=ppc;i=set_rtc_time>)(unsigned
long nowtime);
unsigned long (*get_rtc_time<http://lxr.linux.no/ident?a=ppc;i=get_rtc_time>
)(void);
unsigned char (*rtc_read_val)(int addr<http://lxr.linux.no/ident?a=ppc;i=addr>
);
void (*rtc_write_val)(int addr <http://lxr.linux.no/ident?a=ppc;i=addr>,
unsigned char val <http://lxr.linux.no/ident?a=ppc;i=val>);
void (*calibrate_decr)(void);
[-- Attachment #2: Type: text/html, Size: 1137 bytes --]
^ permalink raw reply
* Re:Re: how to mount /dev/ram0 to /
From: tony @ 2006-05-13 6:21 UTC (permalink / raw)
To: linuxppc-embedded
linuxppc-embedded
>>
>> after boot up,excute df to see the mount point:
>> ~ # df
>> Filesystem 1k-blocks Used Available Use% Mounted on
>> ~ #
>> nothing was mounted.
>Your rc scripts probably did not care to update /etc/mtag as needed.
>Check what "cat /proc/mounts" gives.
____________________________>>>>
cat /proc/mounts, it gives:
# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext2 rw,nogrpid 0 0
/proc /proc proc rw,nodiratime 0 0
#
by seeing this,so I make a root in /dev dir, it links to /dev/ram0,but still doean't work.
>> the fatab in /etc is like this:
>> /dev/ram0 / ext2 defaults 1 1
>> none /proc proc defaults 0 0
>>
>> anything wrong?
>Probably no part of your rc scripts did anything with the information
>in /etc/fstab ...
------------------------>>
but,isn't it auto excuted?
thanks and regards,
tony
^ permalink raw reply
* gentoo-2.6.15-r1 - Kernel oops when removing then reinstalling DVD drive into Pismo mediabay
From: Jordan Herring @ 2006-05-13 1:09 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
This is using the 2.6.15 kernel with the Gentoo patches. The 2.6.16
kernel also exhibits this behavior.
Mar 4 08:48:50 zetagundam mediabay0: switching to 3
Mar 4 08:48:50 zetagundam mediabay0: powering up
Mar 4 08:48:50 zetagundam mediabay0: enabling (kind:3)
Mar 4 08:48:50 zetagundam mediabay0: waiting reset (kind:3)
Mar 4 08:48:51 zetagundam mediabay0: waiting IDE reset (kind:3)
Mar 4 08:48:52 zetagundam mediabay0: waiting IDE ready (kind:3)
Mar 4 08:48:52 zetagundam mediabay 0, registering IDE...
Mar 4 08:48:52 zetagundam Probing IDE interface ide2...
Mar 4 08:48:52 zetagundam hde: MATSHITADVD-ROM SR-8173, ATAPI CD/DVD-ROM drive
Mar 4 08:48:52 zetagundam Oops: kernel access of bad area, sig: 11 [#1]
Mar 4 08:48:52 zetagundam NIP: C010EF6C LR: C010E1F4 SP: CFEE5EB0 REGS: cfee5e00 TRAP: 0300 Not tainted
Mar 4 08:48:52 zetagundam MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
Mar 4 08:48:52 zetagundam DAR: 220000A2, DSISR: 40000000
Mar 4 08:48:52 zetagundam TASK = cfe387f0[721] 'media-bay' THREAD: cfee4000
Mar 4 08:48:52 zetagundam Last syscall: -1
Mar 4 08:48:52 zetagundam GPR00: C016BC14 CFEE5EB0 CFE387F0 220000A2 C0373D50 C016BD14 C0373D4C 00000000
Mar 4 08:48:52 zetagundam GPR08: C02DAC53 FFFFFFFF 00004000 C0373DC0 82004088 00000000 00000000 00000000
Mar 4 08:48:52 zetagundam GPR16: 00000000 00000000 00000000 00000000 00230000 00000000 00000000 00009032
Mar 4 08:48:52 zetagundam GPR24: C0310000 00000014 00000000 FFFFFFEA C0373768 C0373D4C C0373D18 2200008A
Mar 4 08:48:52 zetagundam NIP [c010ef6c] kref_get+0x0/0x24
Mar 4 08:48:52 zetagundam LR [c010e1f4] kobject_get+0x20/0x38
Mar 4 08:48:52 zetagundam Call trace:
Mar 4 08:48:52 zetagundam [c016bc14] get_device+0x20/0x38
Mar 4 08:48:52 zetagundam [c016bde4] device_add+0x48/0x170
Mar 4 08:48:52 zetagundam [c019663c] probe_hwif+0x600/0x780
Mar 4 08:48:52 zetagundam [c0197374] probe_hwif_init_with_fixup+0x1c/0xac
Mar 4 08:48:52 zetagundam [c018f688] ide_register_hw_with_fixup+0x198/0x1dc
Mar 4 08:48:52 zetagundam [c0184e24] media_bay_step+0x3b0/0x54c
Mar 4 08:48:52 zetagundam [c0185054] media_bay_task+0x94/0xf8
Mar 4 08:48:52 zetagundam [c00069bc] kernel_thread+0x44/0x60
Basically, what happens is that if I pull the drive and then reinsert
it (doesn't matter how long) it immediately does this and the keyboard
seizes up. If I ssh in and kill the process that was on that console,
the kernel will continue to run, if I recall correctly. (Of course,
being a laptop, this is rather impractical most of the time.) Usually
when this happens, the drive is *not* mounted at all.
^ permalink raw reply
* Bigphysarea vs. kernel 2.4.32 and PPC405GPr
From: Stephen Williams @ 2006-05-12 23:31 UTC (permalink / raw)
To: linuxppc-embedded
I'm trying to use the bigphysarea patch to help me allocate big
physical chunks of memory for use by some custom embedded devices.
I've applied the bigphysarea-2.4.20 patch and built, no trouble,
and I've got it to config for my PPC. I can see at boot time that
the bigphysarea is getting its pages.
I'm trying to use a mmap call to the driver to map a chunk of this
memory into the process. The mmap for the driver has this:
pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
vma->vm_flags |= VM_RESERVED;
npages = (vma->vm_end - vma->vm_start) / PAGE_SIZE;
heap_map_base = bigphysarea_alloc_pages(npages, 1, GFP_KERNEL);
printk("XXXX Map base=%p, %ld pages\n", heap_map_base, npages);
rc = remap_page_range(vma->vm_start,
(unsigned long)heap_map_base,
npages*PAGE_SIZE,
vma->vm_page_prot);
The mmap returns without an error, but any access to the mapped
region gets me an immediate "Oops: machine check, sig: 7". I don't
see it. Where is the stupid mistake that I'm invariably making?
--
Steve Williams "The woods are lovely, dark and deep.
steve at icarus.com But I have promises to keep,
http://www.icarus.com and lines to code before I sleep,
http://www.picturel.com And lines to code before I sleep."
^ permalink raw reply
* Routing problem
From: Antonio Di Bacco @ 2006-05-12 20:53 UTC (permalink / raw)
To: linuxppc-embedded
Hi all,
I have a board with an MPC880 using the tow FECs as two ethernet interfaces. I
tried to enable the ip forwarding with no success. I have issued "echo 1
> /proc/sys/net/ipv4/ip_forward", is it sufficient to make Linux work as a
router?
Bye,
Antonio.
^ permalink raw reply
* 2.6 vs 2.4
From: Thiago Galesi @ 2006-05-12 16:24 UTC (permalink / raw)
To: Felix Domke; +Cc: linuxppc-dev
In-Reply-To: <44649F09.2020803@elitedvb.net>
> Can you point me to a list of changes which where done? I really like to
> check if they apply to my performance problems with 2.6 kernels, i.e. if
> it's worth porting the board specific changes to a newer kernel.
>
I'm sorry, I was thinking (specifically) of the 8XX port that went
from broken to maintained.
It would help if you could mention some ofthe problems you are having.
>When we switched from 2.4 to 2.6, IDE performance ("hdparm -t" to have a
>single number) was reduced by about 25% (even after trying to finetune
>the IDE driver
>On a 300MHz embedded mips machine, saturating a 100MBit network link via
>ftp is not easy.
Unfortunatelly my knowlege of IDE is almost 0. Maybe it has something
to do with schedulers being used?
About network, I had better results with a much slower processor than
your reported 5Mb/s (60MHz PPC in 2.6.10)
Thiago
^ permalink raw reply
* Re: windfarm for PM72/PM73/RM31
From: Étienne Bersac @ 2006-05-12 15:15 UTC (permalink / raw)
To: Robin H. Johnson; +Cc: linuxppc-dev
In-Reply-To: <20060502001306.GA9589@curie-int.vc.shawcable.net>
[-- Attachment #1: Type: text/plain, Size: 362 bytes --]
Hello,
> The PID params portion will come together a bit later, please bug me by
> Wednesday next week if I haven't posted anything.
Now we are Friday, what can we test ? ;) Sadly, my iMac G5 is under
repair for quite some times (it crashes during compilation of mesa
packages and never woke up).
So what'sup ? :)
Étienne
--
Verso l'Alto !
[-- Attachment #2: Ceci est une partie de message numériquement signée --]
[-- Type: application/pgp-signature, Size: 191 bytes --]
^ permalink raw reply
* Re: 2.6 vs 2.4
From: Felix Domke @ 2006-05-12 14:23 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1147442231.9412.9.camel@localhost.localdomain>
Benjamin Herrenschmidt wrote:
>> Wolfgang Denk has a good listing of issues to consider betn linux 2.4
>>vs 2.6 for ppc82xx based platforms
>>(http://www.denx.de/wiki/Know/Linux24vs26).
>> Would this recommendation still hold?
>> Are there any patches, developments in this area?
> The main open question is: is somebody still maintaining the 8xx kernel
> port ?
The 4xx port has the same problem.
When we switched from 2.4 to 2.6, IDE performance ("hdparm -t" to have a
single number) was reduced by about 25% (even after trying to finetune
the IDE driver - the time between the end of one transfer and the begin
of the next transfer was just too long to saturate the harddisk).
Because of my lack of knowledge of the block device layer's internals I
wasn't able to track that down. My initial plan was to build a trace
using the RiscTrace environment, to see any instruction executed between
requests, but my company moved away from PPC4xx hardware
(unfortunately), so I was never able to complete this. I still believe
that other platforms have the same problems.
On a 300MHz embedded mips machine, saturating a 100MBit network link via
ftp is not easy. Our old 252MHZ PPC machines never performed better than
around 5MB/s (but had a non-DMA NIC, which however could be satured in
theory with about 70% cpu load, based on the bus bandwidth. Why are the
remaining 30% not enough to do IDE DMA and the TCP overhead? Memory
performance? But why did we had better numbers with 2.4 then?).
On that mips machine, both IDE and network support DMA (agreed, it's a
RTL8139, so it requires another memcpy), and memcpy() performance is
>100MB/s. Where is the bottleneck? And, much more important: how do
measure it?
I'm sorry that I can't really much do anything else than complaining,
but all my attempts to track down the problems were futile. I'm not sure
if testing "ftp performance" (as a completely non-synthetic benchmark -
FTP speed is/was a real issue on our platform) is "the right test", but
it's one of the things where i personally want linux to become better.
Or is this just a misconfiguration? Are there mysterious IO scheduler
default parameters which are just suboptimal for our case?
regards,
Felix
^ permalink raw reply
* Re: 2.6 vs 2.4
From: Felix Domke @ 2006-05-12 14:43 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <82ecf08e0605120729l43041aebuaef375a568700354@mail.gmail.com>
Thiago Galesi wrote:
> Not much. This article is almost one year old. Even though some things
> do apply (like bigger footprint, etc), the kernel improved a lot on
> the months that followed that article.
> I've participated in a project that used a (somewhat patched) 2.6.10
> kernel, with soccessful results.
Can you point me to a list of changes which where done? I really like to
check if they apply to my performance problems with 2.6 kernels, i.e. if
it's worth porting the board specific changes to a newer kernel.
Felix
^ permalink raw reply
* Re: 2.6 vs 2.4
From: Thiago Galesi @ 2006-05-12 14:29 UTC (permalink / raw)
To: Srinivas Murthy; +Cc: linuxppc-dev
In-Reply-To: <7cb1293c0605112351y658460a0x8b793ea12004dbfc@mail.gmail.com>
> Hi,
> Wolfgang Denk has a good listing of issues to consider betn linux 2.4 vs
> 2.6 for ppc82xx based platforms
> (http://www.denx.de/wiki/Know/Linux24vs26).
>
> Would this recommendation still hold?
Not much. This article is almost one year old. Even though some things
do apply (like bigger footprint, etc), the kernel improved a lot on
the months that followed that article.
I've participated in a project that used a (somewhat patched) 2.6.10
kernel, with soccessful results.
Not the mention the advantages of the 2.6 kernel in general.
>The main open question is: is somebody still maintaining the 8xx kernel
>port ?
LINUX FOR POWERPC EMBEDDED PPC8XX
P: Marcelo Tosatti
S: Maintained
(this has been determined AFAIK in OLS 2005)
^ permalink raw reply
* Re: Alubook 5,8: No sound with 2.6.17-rc3-g5528e568-dirty
From: Johannes Berg @ 2006-05-12 14:27 UTC (permalink / raw)
To: Wolfgang Pfeiffer; +Cc: linuxppc-dev list, debian-powerpc, Matthias Grimm
In-Reply-To: <20060512141918.GA3566@localhost>
[-- Attachment #1: Type: text/plain, Size: 1334 bytes --]
On Fri, 2006-05-12 at 16:19 +0200, Wolfgang Pfeiffer wrote:
> [Oops, something's messed up there: this actually is a 1.67 Ghz
> processor. I'll have a look at this later .. :) ]
No, it's fine, it is clocked down at boot, use cpufreq.
> I filled /etc/modules with snd_aoa modules and i have sound already
> from boot time on ... with a minor glitch (i.e. not being able to
> store a certain volume level via alsactrl to the next reboot, as it
> seems), but sound ...
There are a bunch of userland bugs... Alsamixer cannot cope with the
3..28 of the capture volume, some gnome tools can't cope with the
negative scale of the playback volume, and others.
I don't want to workaround this, please all file bugs against the
respective programs.
amixer always seems to work fine.
> I have problems doing the same with pbbuttonsd. That is I can start,
> e.g., gtkppbuttons, but when pressing <FN>-<F5> or <FN>-<F4> it seems
> being impossible to change the sound volume this way. But I can toggle
> it completely ON/OFF with <FN>-<F3.> ... not being sure tho' whether
> this is due to some of my braindead mistakes or really a pbbuttonsd
> issue ...
No idea, I no longer use pbbuttonsd.
> Thanks again a lot to everyone for your work, your time, and the
> resulting fine software ... :)
:)
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 793 bytes --]
^ permalink raw reply
* Help: Linux porting to custom target hw
From: Jayanta Das @ 2006-05-12 14:23 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 31 bytes --]
Thiago - thanks for the help.
[-- Attachment #2: Type: text/html, Size: 347 bytes --]
^ permalink raw reply
* Re: Alubook 5,8: No sound with 2.6.17-rc3-g5528e568-dirty
From: Wolfgang Pfeiffer @ 2006-05-12 14:19 UTC (permalink / raw)
To: Johannes Berg; +Cc: linuxppc-dev list, debian-powerpc, Matthias Grimm
In-Reply-To: <20060510213028.GG3878@localhost>
Hi All
First a fat Thanks to Johannes, Benh and to all of those heroes making
it possible to run a relatively freh PPC (Apple) Powerbook model with Linux ... :)
I'm cross-posting. So a short note for those who can't know what all this is about:
I didn't have sound with a fresh git kernel, on the machine mentioned above:
$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.5 (pvr 8003 0105)
bogomips : 16.57
timebase : 8320000
platform : PowerMac
machine : PowerBook5,8
motherboard : PowerBook5,8 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 00000019
L2 cache : 512K unified
pmac-generation : NewWorld
[Oops, something's messed up there: this actually is a 1.67 Ghz
processor. I'll have a look at this later .. :) ]
That's why I sent a message to linuxppc-dev@ozlabs.org. The thread is
starting here:
http://ozlabs.org/pipermail/linuxppc-dev/2006-May/022736.html
On Wed, May 10, 2006 at 11:30:28PM +0200, Wolfgang Pfeiffer wrote:
> On Wed, May 10, 2006 at 06:04:13PM +0200, Johannes Berg wrote:
>
> > Also, try snd-aoa.
>
> Impossible here, it does not compile here. Neither with gcc 4.0 or 4.1
Wrong. To put it mildly .. :) Result probably of me being too tired,
too fast, and too anal when reading instructions ...
# lsmod | grep -i aoa
snd_aoa_codec_onyx 12032 2
snd_aoa_fabric_layout 7492 2
snd_aoa 8076 2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
soundbus 6628 2 snd_aoa_fabric_layout,i2sbus
snd 60148 12 snd_aoa_codec_onyx,snd_aoa_fabric_layout,
snd_aoa,snd_powermac,i2sbus,snd_pcm_oss,
snd_mixer_oss,snd_pcm,snd_timer
I successfully compiled the software now, and only with gcc-4.1. Example:
# modinfo snd_aoa
filename: /lib/modules/2.6.17-rc3-gf358166a-dirty/kernel/sound/aoa/snd-aoa.ko
description: Apple Onboard Audio Sound Driver
author: Johannes Berg <johannes@sipsolutions.net>
license: GPL
vermagic: 2.6.17-rc3-gf358166a-dirty mod_unload gcc-4.1
depends: snd
srcversion: D0DFD2EF0CFEB8E7C08AAEB
The git kernel I compiled the snd-aoa modules for (must be from about
yesterday, IINM):
cat /proc/version
Linux version 2.6.17-rc3-gf358166a-dirty (root@debby1-6) (gcc version
4.1.1 20060428 (prerelease) (Debian 4.1.0-2)) #1 Fri May 12 01:13:36
CEST 2006
config for this latest kernel (Please note the
"CONFIG_PREEMPT_VOLUNTARY=y" in there ... :) ... :
<http://wolfgangpfeiffer.com/config-2.6.17-rc3-gf358166a-dirty.txt>
I filled /etc/modules with snd_aoa modules and i have sound already
from boot time on ... with a minor glitch (i.e. not being able to
store a certain volume level via alsactrl to the next reboot, as it
seems), but sound ...
>
> I took your instructions from
> http://lists.debian.org/debian-powerpc/2006/03/msg00470.html
>
I'm listening to some Internet radio station via alsaplayer while
writing this mail ... :) ...
Results, as of now:
I can change the sound volume via the software. Tested in xine and
alsaplayer-gtk so far ...
I have problems doing the same with pbbuttonsd. That is I can start,
e.g., gtkppbuttons, but when pressing <FN>-<F5> or <FN>-<F4> it seems
being impossible to change the sound volume this way. But I can toggle
it completely ON/OFF with <FN>-<F3.> ... not being sure tho' whether
this is due to some of my braindead mistakes or really a pbbuttonsd
issue ...
Thanks again a lot to everyone for your work, your time, and the
resulting fine software ... :)
Nice weekend
Wolfgang
--
Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/
http://profiles.yahoo.com/wolfgangpfeiffer
Key ID: E3037113
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
^ permalink raw reply
* Re: 2.6 vs 2.4
From: Benjamin Herrenschmidt @ 2006-05-12 14:02 UTC (permalink / raw)
To: Srinivas Murthy; +Cc: linuxppc-dev
In-Reply-To: <1147442231.9412.9.camel@localhost.localdomain>
On Fri, 2006-05-12 at 23:57 +1000, Benjamin Herrenschmidt wrote:
> On Thu, 2006-05-11 at 23:51 -0700, Srinivas Murthy wrote:
> > Hi,
> > Wolfgang Denk has a good listing of issues to consider betn linux 2.4
> > vs 2.6 for ppc82xx based platforms
> > (http://www.denx.de/wiki/Know/Linux24vs26).
> >
> > Would this recommendation still hold?
> >
> > Are there any patches, developments in this area?
>
> The main open question is: is somebody still maintaining the 8xx kernel
> port ?
Oh , and to give a better reply after reading that web page... I'd say
there might be a reason why 2.6 is slower (or appears slower) than 2.4
on some of those embedded platforms. It's definitely faster in a number
of areas on 6xx and other desktop CPUs. A lot of embedded folks will
then bitch and complain about the slowdown on their 8xx processor, but
very few of them if not none popped up actually identifying the actual
issues and coming up with solution for them during the 2.6 dev. cycle.
Ben.
^ permalink raw reply
* Re: 2.6 vs 2.4
From: Benjamin Herrenschmidt @ 2006-05-12 13:57 UTC (permalink / raw)
To: Srinivas Murthy; +Cc: linuxppc-dev
In-Reply-To: <7cb1293c0605112351y658460a0x8b793ea12004dbfc@mail.gmail.com>
On Thu, 2006-05-11 at 23:51 -0700, Srinivas Murthy wrote:
> Hi,
> Wolfgang Denk has a good listing of issues to consider betn linux 2.4
> vs 2.6 for ppc82xx based platforms
> (http://www.denx.de/wiki/Know/Linux24vs26).
>
> Would this recommendation still hold?
>
> Are there any patches, developments in this area?
The main open question is: is somebody still maintaining the 8xx kernel
port ?
Ben.
^ permalink raw reply
* Re: Linux doesn't boot if USB is enabled
From: Igor Luri @ 2006-05-12 13:30 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-embedded
In-Reply-To: <20060512095339.421CC352B2A@atlas.denx.de>
Dear Wolfgang,
I have updated linux kernel an u-boot from the CVS repository, so I have
de latest u-boot and linux version. I grabed the new u-boot an kernel
and now hungs later while probing PCI. If I configure linux kernel
without PCI support, it boots OK.
I use lite5200b_defconfig configuration. I am missing something in the
configuration relationated with PCI?
U-Boot 1.1.4 (May 12 2006 -
14:45:32)
CPU: MPC5200 v2.2, Core v1.4 at 462
MHz
Bus 132 MHz, IPB 132 MHz, PCI 33
MHz
Board: Freescale
Lite5200B
I2C: 85 kHz,
ready
DRAM: 256
MB
FLASH: 32
MB
*** Warning - bad CRC, using default
environment
PCI: Bus Dev VenId DevId Class
Int
00 1a 1057 5809 0680
00
In:
serial
Out:
serial
Err:
serial
Net: FEC
ETHERNET
IDE: Bus 0:
OK
Device 0: Model: SanDisk SDCFB-32 Firm: HDX 2.15 Ser#:
103407C2604A5824
Type: Hard
Disk
Capacity: 30.6 MB = 0.0 GB (62720 x
512)
Device 1: not
available
Type "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0
=> bootp 500000 vmlinux.UBoot
BOOTP broadcast 1
Using FEC ETHERNET device
TFTP from server 10.0.7.228; our IP address is 10.0.17.102
Filename 'vmlinux.UBoot'.
Load address: 0x500000
Loading: #################################################################
#################################################################
##########################################################
done
Bytes transferred = 959935 (ea5bf
hex)
=> usb
reset
(Re)start
USB...
USB: scanning bus for devices... 1 USB Device(s)
found
scanning bus for storage devices... 0 Storage Device(s)
found
=> bootm
500000
## Booting image at 00500000
...
Image Name:
Linux-2.4.25
Created: 2006-05-12 12:31:19
UTC
Image Type: PowerPC Linux Kernel Image (gzip
compressed)
Data Size: 959871 Bytes = 937.4
kB
Load Address:
00000000
Entry Point:
00000000
Verifying Checksum ...
OK
Uncompressing Kernel Image ...
OK
Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual:
0Mb
Linux version 2.4.25 (igor@ILURI_LINUX) (gcc version 3.3.6) #1 vie may
12 14:27:36 CEST 2006
On node 0 totalpages:
65536
zone(0): 65536
pages.
zone(1): 0
pages.
zone(2): 0
pages.
Kernel command
line:
Calibrating delay loop... 307.20
BogoMIPS
Memory: 256340k available (1636k kernel code, 496k data, 76k init, 0k
highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144
bytes)
Inode cache hash table entries: 16384 (order: 5, 131072
bytes)
Mount cache hash table entries: 512 (order: 0, 4096
bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536
bytes)
Page-cache hash table entries: 65536 (order: 6, 262144
bytes)
POSIX conformance testing by
UNIFIX
PCI: Probing PCI hardware
PCI: moved dev
Wolfgang Denk wrote:
>In message <918EB199DDDFFA42BEA2EB3A1C6021F3CE19E2@correo.fagorautomation.net> you wrote:
>
>
>>We also have a mpc5200liteB evaluation board with u-boot 1.1.4 and linux
>>2.4.25 from Denx. We have realized that when USB is enabled linux
>>doen´t boot, it hungs after u-boot uncompresses linux image.
>>
>>
>
>You need the latest versions of both U-boot and Linux.
>
>For U-Boot, you need a version after April 18 (see especially commit
>ID 8419c013048b1f15f3fa2fc7c0463d860a04ee3e). For the Linux kernel,
>you need a version after April 21 (see especially commit ID
>1ac8b71bdbe6de928ba84c83831f6988a9b51165).
>
>I recommend to grab the top-of-tree from both repositories.
>
>Best regards,
>
>Wolfgang Denk
>
>
>
^ permalink raw reply
* Re: [U-Boot-Users] Re: Failure of 2 BAT schemes to enable D-cache
From: Jerry Van Baren @ 2006-05-12 12:26 UTC (permalink / raw)
Cc: U-Boot-Users@lists.sourceforge.net, linuxppc-embedded@ozlabs.org
In-Reply-To: <20060511223814.2195C352B0C@atlas.denx.de>
Wolfgang Denk wrote:
> In message <20060511201329.23866.qmail@web37105.mail.mud.yahoo.com> you wrote:
>> Please post comments and suggestions of how I can
>> initialized MMU for d-cache performance. I am new
>> to this.
>
> We have been through this before, several times. Many times actually.
> I have explained it to you, and so did others.
>
> It is perfectly fine with me if you ignore my advice. But then please
> stop posting the same question again and again here.
>
> You will not receive any new answers.
>
> Again, and definitely for the last time:
>
> It makes no sense to try to enable the data cache on a MPC82xx system
> in U-Boot; the time you could save if you succeeded is marginal to
> your application startup time.
>
> And in Linux the D-Cache is enabled, so no changes are needed.
>
>
> Best regards,
> Wolfgang Denk
Furthermore, manipulating processor control registers interactively with
a debugger (e.g. attempting to enable dcache) is somewhere between
nearly impossible and totally impossible. Read and understand the
processor manual on the sequences required for changing control
registers and enabling/disabling cache. You cannot guarantee that the
sequences will be done properly because the debugger has LOTS of unknown
code running to implement what to you "looks like" a simple register
write command.
Signing off on this thread,
gvb
^ permalink raw reply
* Re: ppc32 kernel boot problem (pmu related?)
From: Nathan Pilatzke @ 2006-05-12 12:40 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1147403525.7343.19.camel@localhost.localdomain>
On 5/11/06, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
> On Thu, 2006-05-11 at 15:07 -0400, Nathan Pilatzke wrote:
> > I am running an eMac first generation powerpc (700MHz) and the Gentoo
> > distribution. Kernel 2.6.15 (Gentoo revision 1) is working quite well
> > for me. A few days ago I compiled 2.6.17-rc3 from the vanilla sources
> > ebuild and am having troubles with the pmu code.
> >
> > I can boot successfully when my config has
> > # CONFIG_ADB_PMU is not set
> > but cannot boot if my config has
> > CONFIG_ADB_PMU=3Dy
>
> What happens when you enable that option ?
>
Sorry, I was a little light on details... I thought this might be a
known problem. With the pmu option enabled (and early open firmware
messages enabled) I get:
Using PowerMac machine description
Total memory =3D 640MB; using 2048kB for hash table (at cfe00000)
Linux version 2.6.17-rc3 (root@the_emac) (gcc version 3.4.5 (Gentoo 3.4.5-r=
1, ss
p-3.4.5-1.0, pie-8.7.9)) #11 Thu May 11 09:53:39 EDT 2006
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11
Mapped at 0xfdfc0000
Found a Keylargo mac-io controller, rev: 3, mapped at 0xfdf40000
Processor NAP mode on idle enabled.
PowerMac motherboard: eMac
setup_arch: bootmem
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
arch: exit
Top of RAM: 0x28000000, Total RAM: 0x28000000
Memory hole size: 0MB
Built 1 zonelists
Kernel command line: root=3D/dev/sda8 ro video=3Dofonly root=3D/dev/sda8 ro=
otdelay=3D10
resume=3D/dev/sda9
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
time_init: decrementer frequency =3D 24.913389 MHz
time_init: processor frequency =3D 700.000000 MHz
and then the machine freezes and requires a power cycle to restart.
Without that option enabled I get this:
PowerMac motherboard: eMac
-setup_arch: bootmem
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
-via-pmu: Server Mode is disabled
-PMU driver v2 initialized for Core99, firmware: 0c
-arch: exit
+WARNING ! Your machine is PMU-based but your kernel
+ wasn't compiled with CONFIG_ADB_PMU option !
Top of RAM: 0x28000000, Total RAM: 0x28000000
Memory hole size: 0MB
+On node 0 totalpages: 163840
+ DMA zone: 163840 pages, LIFO batch:31
Built 1 zonelists
Kernel command line: root=3D/dev/sda8 ro video=3Dofonly root=3D/dev/sda8
rootdelay=3D10
resume=3D/dev/sda9
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
time_init: decrementer frequency =3D 24.913389 MHz
time_init: processor frequency =3D 700.000000 MHz
+Console: colour dummy device 80x25
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
...
and it continues booting as normal. As a side note it should be known
that I could not coerce the PowerMac ALSA sound driver to compile
without the PMU enabled either, so there probably should be a config
dependency on it if that is the case.
Anything else I can do?
^ permalink raw reply
* regarding setup_common_caches (port linux to prpmc610 kernel-2.4.25 with MVME2100 patch) dated jan 10 2006
From: Kiran Kumar.A @ 2006-05-12 11:06 UTC (permalink / raw)
To: siman; +Cc: linuxppc-embedded
Hello Siman,
This is kiran here working on mvme6100 for kernel 2.6.13-4.
I saw your issue regarding the setup_common_caches in mvme2100 port.=20
Since I'm also getting the similar problem in the port mentioned above, I j=
ust wanted to know that , Did you crack the issue of common_caches??. If so=
, Please let me know as to what could be done with this.
Waiting for your reply at the earliest.
regards,
kiran
--=20
_______________________________________________
Search for businesses by name, location, or phone number. -Lycos Yellow Pa=
ges
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.as=
p?SRC=3Dlycos10
^ permalink raw reply
* Re: how to mount /dev/ram0 to /
From: Wolfgang Denk @ 2006-05-12 10:09 UTC (permalink / raw)
To: tony; +Cc: linuxppc-embedded@ozlabs.org
In-Reply-To: <44645CBD.00AAC3.19405>
In message <44645CBD.00AAC3.19405> you wrote:
>
> after boot up,excute df to see the mount point:
> ~ # df
> Filesystem 1k-blocks Used Available Use% Mounted on
> ~ #
> nothing was mounted.
Your rc scripts probably did not care to update /etc/mtag as needed.
Check what "cat /proc/mounts" gives.
> the fatab in /etc is like this:
> /dev/ram0 / ext2 defaults 1 1
> none /proc proc defaults 0 0
>
> anything wrong?
Probably no part of your rc scripts did anything with the information
in /etc/fstab ...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Perl itself is usually pretty good about telling you what you
shouldn't do. :-) - Larry Wall in <11091@jpl-devvax.JPL.NASA.GOV>
^ permalink raw reply
* how to mount /dev/ram0 to /
From: tony @ 2006-05-12 9:43 UTC (permalink / raw)
To: linuxppc-embedded@ozlabs.org
I made a new uRamdisk for the mini bubinga board,
change uboot's bootargs like this
bootargs root=/dev/ram rw console=ttyS0,115200 ip=192.168.0.200:192.168.0.19:::bubinga:eth0:off panic=1
==>
bootargs root=/dev/ram0 rw console=ttyS0,115200 ip=192.168.0.200:192.168.0.19:::bubinga:eth0:off panic=1
after boot up,excute df to see the mount point:
~ # df
Filesystem 1k-blocks Used Available Use% Mounted on
~ #
nothing was mounted.
the fatab in /etc is like this:
/dev/ram0 / ext2 defaults 1 1
none /proc proc defaults 0 0
anything wrong?
thank you.
tony
^ permalink raw reply
* Re: Linux doesn't boot if USB is enabled
From: Wolfgang Denk @ 2006-05-12 9:53 UTC (permalink / raw)
To: IGOR LURI; +Cc: linuxppc-embedded
In-Reply-To: <918EB199DDDFFA42BEA2EB3A1C6021F3CE19E2@correo.fagorautomation.net>
In message <918EB199DDDFFA42BEA2EB3A1C6021F3CE19E2@correo.fagorautomation.net> you wrote:
>
> We also have a mpc5200liteB evaluation board with u-boot 1.1.4 and linux
> 2.4.25 from Denx. We have realized that when USB is enabled linux
> doen´t boot, it hungs after u-boot uncompresses linux image.
You need the latest versions of both U-boot and Linux.
For U-Boot, you need a version after April 18 (see especially commit
ID 8419c013048b1f15f3fa2fc7c0463d860a04ee3e). For the Linux kernel,
you need a version after April 21 (see especially commit ID
1ac8b71bdbe6de928ba84c83831f6988a9b51165).
I recommend to grab the top-of-tree from both repositories.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Well, the way I see it, logic is only a way of being ignorant by num-
bers. - Terry Pratchett, _Small Gods_
^ permalink raw reply
* Linux doesn't boot if USB is enabled
From: IGOR LURI @ 2006-05-12 8:53 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 3070 bytes --]
Hi all,
We have a mpc5200 Icecube board with u-boot 1.1.3 and linux 2.4.25 from Denx where linux boots with USB enabled.
We also have a mpc5200liteB evaluation board with u-boot 1.1.4 and linux 2.4.25 from Denx. We have realized that when USB is enabled linux doen´t boot, it hungs after u-boot uncompresses linux image.
=> usb reset
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
=>run bootcmd
BOOTP broadcast 1
DHCP client bound to address 10.0.17.102
Using FEC ETHERNET device
TFTP from server 10.0.7.228; our IP address is 10.0.17.102
Filename 'vmlinux.UBoot'.
Load address: 0x500000
Loading: #################################################################
#################################################################
#################################################################
#
done
Bytes transferred = 1000231 (f4327 hex)
=> bootm 0x500000
## Booting image at 00500000 ...
Image Name: Linux-2.4.25-rthal5-TRACE
Created: 2006-05-11 15:08:31 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1000167 Bytes = 976.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.25-rthal5-TRACE (igor@ILURI_LINUX) (gcc version 3.3.6) #301 jue may 11 17:08:00 CEST 2006
On node 0 totalpages: 65536
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw console=ttyS0 console=ttyS0 init=/sbin/init ip=on
Console: colour dummy device 80x25
Calibrating delay loop... 307.20 BogoMIPS
Memory: 256012k available (1824k kernel code, 612k data, 96k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
If we disable USB with the command
=> usb stop
stopping USB..
linux boots as usual.
I don't found changes in USB part between u-boot 1.1.3 and u-boot 1.1.4. I have readen MPC5200 revision B chip errata and there is nothing about USB. But I have found a manual named U-Boot Bootloader for MPL Single Board Computer that says the following:
Warning: Please make sure to stop the USB subsystem before booting an OS. This can be done by
adding the command usb stop to the variable bootcmd:
This board uses a ppc405 and also it has the same problem.
Someone knows why linux doesn't boot with USB enabled on a mpc5200liteB board? Is this a hardware problem?Is a revision B chip errata? Or, a software problem?
Thanks in advance.
Igor Luri
R&D Software Department
Fagor Automation S. Coop.
P. O. Box 144
E-20500 Mondragón-Arrasate
Tel. ++34 943 71 92 00
++34 943 71 92 01 (Ext. 44124)
Fax. ++34 943 79 92 03
www.fagorautomation.com
[-- Attachment #2: Type: text/html, Size: 6648 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox