* RE: I2C: Getting Compiation Error for application program
From: Sachin Rane @ 2006-09-21 11:10 UTC (permalink / raw)
To: Matthias Fuchs; +Cc: linuxppc-embedded
In-Reply-To: <200609211113.15457.matthias.fuchs@esd-electronics.com>
[-- Attachment #1: Type: text/plain, Size: 3396 bytes --]
Hello Matthias,
Thanks for the reply.
I got the reason from i2c mailing list on getting compilation errors.
A text from the I2C mailing list :
8<---------------------------------------------------------------------------------------
"All the above it caused by you including <linux/i2c.h>. As explained
before, this is a kernel-only header file, which you must _not_ include
in user-space code. You are not the only one to blame though, as in
fact this header file should not be in /usr/include at all, this is a
mistake which should be fixed "soon". "
--------------------------------------------------------------------------------------->8
Some of the error lines are appended for your reference.
Now I will do the changes in the code as per above above suggestion.
Tnaks and Regards,
Sachin Rane
> -bash-2.05b# gcc eeprom-client.c
> In file included from /usr/include/asm/div64.h:1,
> from /usr/include/linux/jiffies.h:9,
> from /usr/include/linux/sched.h:12,
> from /usr/include/linux/module.h:10,
> from /usr/include/linux/i2c.h:31,
> from eeprom-client.c:1:
> /usr/include/asm-generic/div64.h:54:3: #error do_div() does not yet support the C64
> In file included from /usr/include/linux/sched.h:12,
> from /usr/include/linux/module.h:10,
> from /usr/include/linux/i2c.h:31,
> from eeprom-client.c:1:
> /usr/include/linux/jiffies.h:84: error: parse error before "jiffies_64"
> /usr/include/linux/jiffies.h:88: error: parse error before "get_jiffies_64"
> In file included from /usr/include/linux/sched.h:12,
> from /usr/include/linux/module.h:10,
> from /usr/include/linux/i2c.h:31,
> from eeprom-
________________________________
From: Matthias Fuchs [mailto:matthias.fuchs@esd-electronics.com]
Sent: Thu 9/21/2006 5:13 AM
To: linuxppc-embedded@ozlabs.org
Cc: Sachin Rane
Subject: Re: I2C: Getting Compiation Error for application program
On Wednesday 20 September 2006 14:51, Sachin Rane wrote:
> Hi,
>
> I am trying to compile simple program (appended), but getting lots of
compilation error.
It's always helpful to see the compiler output. Could you post it?
> I am using Timesys Linux 2.6.13 for ppc440 evaluation board.
>
> Command used for compilation:
> $> gcc eeprom-client.c -o eeprom-client.o
Are you crosscompiling? Doesn't look like that...
>
> Could you help me to find out the reason behind getting the errors?
>
> Regards,
> Sachin Rane
>
>
>
8< ------------------------eeprom-client.c -------------------------------------------------------------------------------------
>
> #include <linux/i2c.h>
> #include <linux/i2c-dev.h>
>
> int main()
> {
> int file;
> int adapter_nr = 0; /* probably dynamically determined */
> char filename[20];
> int addr = 0xA1; /* The I2C address */
You propably have to use 0x50 here.
>
> sprintf(filename,"/dev/i2c-%d",adapter_nr);
> if ((file = open(filename,O_RDWR)) < 0)
> {
> exit(1);
> }
>
> if (ioctl(file,I2C_SLAVE,addr) < 0)
> {
> exit(1);
> }
> else
> {
> printf("\n Able to bind the adapter");
> }
> return 0;
> }
Matthias
[-- Attachment #2: Type: text/html, Size: 6315 bytes --]
^ permalink raw reply
* A question about power on
From: enorm @ 2006-09-21 11:11 UTC (permalink / raw)
To: linuxppc-embedded
After power on, cpu reads instruction from certain addr. But how does it
know how many bits he can read at once.
^ permalink raw reply
* Re: First cut of "wrapper" program
From: Simon Richter @ 2006-09-21 11:03 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <17681.53490.705075.155580@cargo.ozlabs.ibm.com>
Hi,
Paul Mackerras wrote:
> Here is a prototype of a "wrapper" program which will take a kernel,
> and optionally an initrd image and/or a device tree blob, and create a
> bootable zImage. My idea is that the Makefile in arch/powerpc/boot
> will construct the files that this needs, then run it one or more
> times to create whatever images are needed.
Hmm, in Debian there is a tool called mkvmlinuz that does this, which is
run in a hook script after generating an initrd.
Simon
^ permalink raw reply
* bsp for Linux kernel 2.6
From: shenbagaraj @ 2006-09-22 0:07 UTC (permalink / raw)
To: linuxppc-embedded
In-Reply-To: <4509FE5C.2070104@dlasys.net>
Hi,
I ma working on Windriver powerquicc board 8260.where do i get the required
patches for linux 2.6.11.11.
regards,
shen
^ permalink raw reply
* Re: First cut of "wrapper" program
From: Paul Mackerras @ 2006-09-21 11:41 UTC (permalink / raw)
To: Simon Richter; +Cc: linuxppc-dev
In-Reply-To: <45127177.3000408@hogyros.de>
Simon Richter writes:
> Hmm, in Debian there is a tool called mkvmlinuz that does this, which is
> run in a hook script after generating an initrd.
It doesn't handle any of the embedded formats (uImage, treeboot,
etc.). Neither does my script, but it will... It also doesn't handle
including a device-tree blob.
Paul.
^ permalink raw reply
* IDE not found on Performa due to interrupt breakage
From: Olaf Hering @ 2006-09-21 11:50 UTC (permalink / raw)
To: linuxppc-dev
The IDE controller is not usable on a Performa 6400 with 2.6.18:
<6>hda: Enabling MultiWord DMA 2
<4>ide0: Disabled unable to get IRQ 13.
<6>ide0: failed to initialize IDE interface
inst-sys:~ # cat /proc/interrupts
CPU0
18: 21329 PMAC-PIC Edge MESH
20: 0 PMAC-PIC Level NMI - XMON
23: 77585 PMAC-PIC Level eth0
27: 5733 PMAC-PIC Edge ADB
BAD: 0
inst-sys:~ # cat /proc/iomem
80000000-8fffffff : /bandit
80800000-808003ff : 0000:00:0d.0
80800000-808003ff : tulip
f1000000-f10fffff : valkyriefb
f3000000-f3ffffff : /bandit
f3000000-f307ffff : 0000:00:10.0
f3008000-f30080ff : mesh
f3008400-f30084ff : pmac_zilog
f3008500-f30085ff : pmac_zilog
f3008600-f30086ff : pmac_zilog
f3008700-f30087ff : pmac_zilog
f3008b00-f3008bff : ide-pmac (dma)
f3010000-f30100ff : mesh
f3013000-f301301f : pmac_zilog
f3013020-f301303f : pmac_zilog
f3020000-f3020fff : ide-pmac (ports)
<6>Using PowerMac machine description
<5>Linux version 2.6.18-rc7-git1-2-default (geeko@buildhost) (gcc version 4.1.2 20060913 (prerelease) (SUSE Linux)) #1 Fri Sep 15 11:35:09 UTC 2006
<4>Found initrd at 0xc0494000:0xc0b8ca1a
<6>Found a OHare mac-io controller, rev: 1, mapped at 0xfdf00000
<6>PowerMac motherboard: Alchemy
<6>Cache coherency enabled for bandit/PSX
<6>Found Bandit PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
<4>nvram: OF partition at 0x1800
<4>nvram: XP partition at 0x1300
<4>nvram: NR partition at 0x1400
<7>Top of RAM: 0x8800000, Total RAM: 0x8800000
<7>Memory hole size: 0MB
<7>On node 0 totalpages: 34816
<7> DMA zone: 34816 pages, LIFO batch:7
<4>Built 1 zonelists. Total pages: 34816
<5>Kernel command line: ramdisk_size=8192 minmemory=0 memyasttext=0 sysrq=1 quiet start_shell install=slp
<6>irq: Found primary Apple PIC /bandit/ohare for 32 irqs
<6>irq: System has 32 possible interrupts
<4>PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>GMT Delta read from XPRAM: 120 minutes, DST: on
<7>time_init: decrementer frequency = 9.999850 MHz
<7>time_init: processor frequency = 200.000000 MHz
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<7>High memory: 0k
<6>Memory: 114188k/139264k available (3568k kernel code, 24932k reserved, 520k data, 452k bss, 192k init)
<7>Calibrating delay loop... 19.90 BogoMIPS (lpj=39808)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<6>checking if image is initramfs... it is
<4>Freeing initrd memory: 7138k freed
<6>NET: Registered protocol family 16
<6>PCI: Probing PCI hardware
<7>Registering pmac pic with sysfs...
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<4>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 8192 bind 4096)
<6>TCP reno registered
<4>Thermal assist unit not available
<6>audit: initializing netlink socket (disabled)
<5>audit(1158838343.315:1): initialized
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>Monitor sense value = 0x60b
<6>using video mode 13 and color mode 0.
<4>Console: switching to colour frame buffer device 104x39
<6>fb0: valkyrie frame buffer device
<6>Generic RTC Driver v1.07
<6>Macintosh non-volatile memory driver v1.1
<6>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
<6>ttyS0 at MMIO 0xf3013020 (irq = 16) is a Z85c30 ESCC - Serial port
<6>ttyS1 at MMIO 0xf3013000 (irq = 17) is a Z85c30 ESCC - Serial port
<4>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
<6>MacIO PCI driver attached to OHare chipset
<4>Can't request resource 0 for MacIO device 0.f3000000:ohare
<6>input: Macintosh mouse button emulation as /class/input/input0
<4>Macintosh CUDA driver v0.5 for Unified ADB.
<6>apm_emu: Requires a machine with a PMU.
<6>adb: starting probe task...
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>ide0: no intrs for device /bandit/ohare/ATA, using 13
<6>ide0: Found Apple OHare ATA controller, bus ID 0, irq 13
<7>Probing IDE interface ide0...
<4>hda: IBM-DJNA-371350, ATA DISK drive
<7>adb devices: [2]: 2 5 [3]: 3 1
<4>ADB keyboard at 2, handler set to 3
<6>Detected ADB keyboard, type ISO, swapping keys.
<6>input: ADB keyboard as /class/input/input1
<4>ADB mouse at 3, handler set to 2
<6>input: ADB mouse as /class/input/input2
<6>adb: finished probe task...
<6>hda: Enabling MultiWord DMA 2
<4>ide0: Disabled unable to get IRQ 13.
<6>ide0: failed to initialize IDE interface
<7>Probing IDE interface ide0...
<4>hda: IBM-DJNA-371350, ATA DISK drive
<4>hda: IRQ probe failed (0x0)
<4>kobject_add failed for ide0 with -EEXIST, don't try to register things with the same name in the same directory.
<4>Call Trace:
<4>[C1865EB0] [C00086FC] show_stack+0x50/0x184 (unreliable)
<4>[C1865ED0] [C015BD50] kobject_add+0x154/0x190
<4>[C1865EF0] [C01EBBD0] device_add+0x68/0x314
<4>[C1865F20] [C0209B0C] probe_hwif+0x618/0x804
<4>[C1865F50] [C020A530] ideprobe_init+0x84/0x164
<4>[C1865F90] [C037037C] ide_generic_init+0x10/0x28
<4>[C1865FA0] [C0003DA4] init+0x90/0x25c
<4>[C1865FF0] [C0013668] kernel_thread+0x44/0x60
<4>hdb: IRQ probe failed (0x0)
<4>hdb: IRQ probe failed (0x0)
<6>hda: Enabling MultiWord DMA 2
<4>ide0: DISABLED, NO IRQ
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>usbcore: registered new driver appletouch
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Freeing unused kernel memory: 192k init
<5>SCSI subsystem initialized
<6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
<6>loop: loaded (max 8 devices)
<6>mesh: configured for synchronous 5 MB/s
<6>mesh: performing initial bus reset...
<6>scsi0 : MESH
<6>mesh: target 3 synchronous at 5.0 MB/s
<5> Vendor: MATSHITA Model: CD-ROM CR-8008 Rev: 8.0e
<5> Type: CD-ROM ANSI SCSI revision: 02
<4>sr0: scsi-1 drive
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:3:0: Attached scsi CD-ROM sr0
<5>sr 0:0:3:0: Attached scsi generic sg0 type 5
<6>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
<4>PCI: Enabling device 0000:00:0d.0 (0014 -> 0017)
<6>tulip0: EEPROM default media type Autosense.
<6>tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
<6>tulip0: MII transceiver #5 config 1000 status 782d advertising 01e1.
<6>eth0: Digital DS21143 Tulip rev 65 at c9188000, 00:00:1C:B5:A9:15, IRQ 23.
<6>eth0: Setting full-duplex based on MII#5 link partner capability of 45e1.
<5>lockd: failed to open /var/lib/nfs/state: err=-2
^ permalink raw reply
* Re: IDE not found on Performa due to interrupt breakage
From: Benjamin Herrenschmidt @ 2006-09-21 11:56 UTC (permalink / raw)
To: Olaf Hering; +Cc: linuxppc-dev
In-Reply-To: <20060921115030.GA16732@aepfle.de>
On Thu, 2006-09-21 at 13:50 +0200, Olaf Hering wrote:
> The IDE controller is not usable on a Performa 6400 with 2.6.18:
>
> <6>hda: Enabling MultiWord DMA 2
> <4>ide0: Disabled unable to get IRQ 13.
> <6>ide0: failed to initialize IDE interface
.../...
Looks like a workaround for bogus OF bitrotted... What about this patch:
Index: linux-work/drivers/ide/ppc/pmac.c
===================================================================
--- linux-work.orig/drivers/ide/ppc/pmac.c 2006-07-01 13:51:19.000000000 +1000
+++ linux-work/drivers/ide/ppc/pmac.c 2006-09-21 21:55:31.000000000 +1000
@@ -1326,7 +1326,7 @@
if (macio_irq_count(mdev) == 0) {
printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n",
i, mdev->ofdev.node->full_name);
- irq = 13;
+ irq = irq_create_mapping(NULL, 13);
} else
irq = macio_irq(mdev, 0);
^ permalink raw reply
* [PATCH 0/11] Add support for QE and 8360EMDS board
From: Li Yang @ 2006-09-21 12:17 UTC (permalink / raw)
To: linuxppc-dev
The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism ,addresses all the comments received with
last submission and includes some style fixes.
- Leo
^ permalink raw reply
* [PATCH 1/11] qe_lib: Add QE Kconfig
From: Li Yang @ 2006-09-21 12:17 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/Kconfig | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 694b0c6..c907792 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -355,6 +355,16 @@ config APUS
<http://linux-apus.sourceforge.net/>.
endchoice
+config QUICC_ENGINE
+ bool
+ depends on MPC836x
+ default y
+ help
+ The QE(QUICC Engine) is a new generation of coprocessor on
+ Freescale embedded CPUs(like CPM in older chips). Selecting
+ this option means that you wish to build a kernel for a machine
+ with QE coprocessor on it.
+
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool "IBM pSeries & new (POWER5-based) iSeries"
@@ -1047,6 +1057,8 @@ # XXX source "arch/ppc/8xx_io/Kconfig"
# XXX source "arch/ppc/8260_io/Kconfig"
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
^ permalink raw reply related
* [PATCH 2/11] qe_lib: Add common files
From: Li Yang @ 2006-09-21 12:18 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/Makefile | 1
arch/powerpc/sysdev/qe_lib/Kconfig | 29 ++
arch/powerpc/sysdev/qe_lib/Makefile | 8 +
arch/powerpc/sysdev/qe_lib/qe_common.c | 354 +++++++++++++++++++++++
include/asm-powerpc/qe.h | 493 ++++++++++++++++++++++++++++++++
5 files changed, 885 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index e5e999e..c6e5b31 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_PPC_TODC) += todc.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_I8259) += i8259.o
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
new file mode 100644
index 0000000..28487e4
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -0,0 +1,29 @@
+#
+# QE Communication options
+#
+
+menu "QE Options"
+ depends on QUICC_ENGINE
+
+config UCC_SLOW
+ bool "UCC Slow Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC slow
+ protocols: UART, BISYNC, QMC
+
+config UCC_FAST
+ bool "UCC Fast Protocols Support"
+ default n
+ select UCC
+ help
+ This option provides qe_lib support to UCC fast
+ protocols: HDLC, Ethernet, ATM, transparent
+
+config UCC
+ bool
+ default y if UCC_FAST || UCC_SLOW
+
+endmenu
+
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
new file mode 100644
index 0000000..9a54a81
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux ppc-specific parts of QE
+#
+obj-$(CONFIG_QUICC_ENGINE)+= qe_common.o qe.o qe_ic.o qe_io.o
+
+obj-$(CONFIG_UCC) += ucc.o
+obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
+obj-$(CONFIG_UCC_FAST) += ucc_fast.o ucc_slow.o
diff --git a/arch/powerpc/sysdev/qe_lib/qe_common.c b/arch/powerpc/sysdev/qe_lib/qe_common.c
new file mode 100644
index 0000000..a4ed18e
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_common.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * General Purpose functions for the global management of the
+ * QUICC Engine (QE).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/prom.h>
+#include <asm/rheap.h>
+
+/* QE snum state
+*/
+typedef enum qe_snum_state {
+ QE_SNUM_STATE_USED, /* used */
+ QE_SNUM_STATE_FREE /* free */
+} qe_snum_state_e;
+
+/* QE snum
+*/
+typedef struct qe_snum {
+ u8 num; /* snum */
+ qe_snum_state_e state; /* state */
+} qe_snum_t;
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+EXPORT_SYMBOL(qe_immr);
+qe_map_t *qe_immr = NULL;
+static qe_snum_t snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+
+static void qe_snums_init(void);
+static void qe_muram_init(void);
+static int qe_sdma_init(void);
+
+static DEFINE_SPINLOCK(qe_lock);
+
+void qe_reset(void)
+{
+ if (qe_immr == NULL)
+ qe_immr = (qe_map_t *) ioremap(get_qe_base(), QE_IMMAP_SIZE);
+
+ qe_snums_init();
+
+ qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ /* Reclaim the MURAM memory for our use. */
+ qe_muram_init();
+
+ if (qe_sdma_init())
+ panic("sdma init failed!");
+}
+
+EXPORT_SYMBOL(qe_issue_cmd);
+int qe_issue_cmd(uint cmd, uint device, u8 mcn_protocol, u32 cmd_input)
+{
+ unsigned long flags;
+ u32 cecr;
+ u8 mcn_shift = 0, dev_shift = 0;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ if (cmd == QE_RESET) {
+ out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ } else {
+ if (cmd == QE_ASSIGN_PAGE) {
+ /* Here device is the SNUM, not sub-block */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ } else if (cmd == QE_ASSIGN_RISC) {
+ /* Here device is the SNUM, and mcnProtocol is
+ * e_QeCmdRiscAssignment value */
+ dev_shift = QE_CR_SNUM_SHIFT;
+ mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
+ } else {
+ if (device == QE_CR_SUBBLOCK_USB)
+ mcn_shift = QE_CR_MCN_USB_SHIFT;
+ else
+ mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
+ }
+
+ out_be32(&qe_immr->cp.cecdr,
+ immrbar_virt_to_phys((void *)cmd_input));
+ out_be32(&qe_immr->cp.cecr,
+ (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
+ mcn_protocol << mcn_shift));
+ }
+
+ /* wait for the QE_CR_FLG to clear */
+ do {
+ cecr = in_be32(&qe_immr->cp.cecr);
+ } while (cecr & QE_CR_FLG);
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return 0;
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * 16 BRGs, which can be connected to the QE channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+static unsigned int brg_clk = 0;
+
+unsigned int get_brg_clk(void)
+{
+ struct device_node *qe;
+ if (brg_clk)
+ return brg_clk;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ u32 *prop = (u32 *) get_property(qe, "brg-frequency", &size);
+ brg_clk = *prop;
+ of_node_put(qe);
+ };
+ return brg_clk;
+}
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void qe_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+ u32 divisor;
+ int div16 = 0;
+
+ bp = (uint *) & qe_immr->brg.brgc1;
+ bp += brg;
+
+ divisor = (get_brg_clk() / rate);
+ if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ div16 = 1;
+ divisor /= 16;
+ }
+
+ *bp = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
+ if (div16)
+ *bp |= QE_BRGC_DIV16;
+}
+
+static void qe_snums_init(void)
+{
+ int i;
+
+ /* Initialize the SNUMs array. */
+ for (i = 0; i < QE_NUM_OF_SNUM; i++)
+ snums[i].state = QE_SNUM_STATE_FREE;
+
+ /* Initialize SNUMs (thread serial numbers) according to QE
+ * spec chapter 4, SNUM table */
+ i = 0;
+ snums[i++].num = 0x04;
+ snums[i++].num = 0x05;
+ snums[i++].num = 0x0C;
+ snums[i++].num = 0x0D;
+ snums[i++].num = 0x14;
+ snums[i++].num = 0x15;
+ snums[i++].num = 0x1C;
+ snums[i++].num = 0x1D;
+ snums[i++].num = 0x24;
+ snums[i++].num = 0x25;
+ snums[i++].num = 0x2C;
+ snums[i++].num = 0x2D;
+ snums[i++].num = 0x34;
+ snums[i++].num = 0x35;
+ snums[i++].num = 0x88;
+ snums[i++].num = 0x89;
+ snums[i++].num = 0x98;
+ snums[i++].num = 0x99;
+ snums[i++].num = 0xA8;
+ snums[i++].num = 0xA9;
+ snums[i++].num = 0xB8;
+ snums[i++].num = 0xB9;
+ snums[i++].num = 0xC8;
+ snums[i++].num = 0xC9;
+ snums[i++].num = 0xD8;
+ snums[i++].num = 0xD9;
+ snums[i++].num = 0xE8;
+ snums[i++].num = 0xE9;
+}
+
+int qe_get_snum(void)
+{
+ unsigned long flags;
+ int snum = -EBUSY;
+ int i;
+
+ spin_lock_irqsave(&qe_lock, flags);
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].state == QE_SNUM_STATE_FREE) {
+ snums[i].state = QE_SNUM_STATE_USED;
+ snum = snums[i].num;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&qe_lock, flags);
+
+ return snum;
+}
+
+EXPORT_SYMBOL(qe_get_snum);
+
+void qe_put_snum(u8 snum)
+{
+ int i;
+
+ for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ if (snums[i].num == snum) {
+ snums[i].state = QE_SNUM_STATE_FREE;
+ break;
+ }
+ }
+}
+
+EXPORT_SYMBOL(qe_put_snum);
+
+static int qe_sdma_init(void)
+{
+ sdma_t *sdma = &qe_immr->sdma;
+ uint sdma_buf_offset;
+
+ if (!sdma)
+ return -ENODEV;
+
+ /* allocate 2 internal temporary buffers (512 bytes size each) for
+ * the SDMA */
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ if (IS_MURAM_ERR(sdma_buf_offset))
+ return -ENOMEM;
+
+ out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
+ QE_SDMR_CEN_SHIFT)));
+
+ return 0;
+}
+
+/*
+ * muram_alloc / muram_free bits.
+ */
+static DEFINE_SPINLOCK(qe_muram_lock);
+
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t qe_boot_muram_rh_block[16];
+static rh_info_t qe_muram_info;
+
+static void qe_muram_init(void)
+{
+ /* initialize the info header */
+ rh_init(&qe_muram_info, 1,
+ sizeof(qe_boot_muram_rh_block) /
+ sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
+
+ /* Attach the usable muram area */
+ /* XXX: This is actually crap. QE_DATAONLY_BASE and
+ * QE_DATAONLY_SIZE is only a subset of the available muram. It
+ * varies with the processor and the microcode patches activated.
+ * But the following should be at least safe.
+ */
+ rh_attach_region(&qe_muram_info,
+ (void *)QE_MURAM_DATAONLY_BASE,
+ QE_MURAM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the MURAM area.
+ */
+uint qe_muram_alloc(uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start = rh_alloc_align(&qe_muram_info, size, align, "QE");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (uint) start;
+}
+
+EXPORT_SYMBOL(qe_muram_alloc);
+
+int qe_muram_free(uint offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ ret = rh_free(&qe_muram_info, (void *)offset);
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(qe_muram_free);
+
+/* not sure if this is ever needed */
+uint qe_muram_alloc_fixed(uint offset, uint size)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_muram_lock, flags);
+ start =
+ rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+ return (uint) start;
+}
+
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+void qe_muram_dump(void)
+{
+ rh_dump(&qe_muram_info);
+}
+
+EXPORT_SYMBOL(qe_muram_dump);
+
+void *qe_muram_addr(uint offset)
+{
+ return (void *)&qe_immr->muram[offset];
+}
+
+EXPORT_SYMBOL(qe_muram_addr);
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
new file mode 100644
index 0000000..ad3353a
--- /dev/null
+++ b/include/asm-powerpc/qe.h
@@ -0,0 +1,493 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __QE_H__
+#define __QE_H__
+
+#include <asm/immap_qe.h>
+
+/* Multi User RAM addresses.
+ */
+#define QE_MURAM_DATAONLY_BASE ((uint)0x0)
+#define QE_MURAM_NOSPACE ((uint)0x7fffffff)
+#define QE_MURAM_DATAONLY_SIZE ((uint)(48 * 1024) - QE_MURAM_DATAONLY_BASE)
+
+static inline long IS_MURAM_ERR(const uint offset)
+{
+ return (uint) offset > (uint) - 1000L;
+}
+
+#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_BRGS 16
+#define QE_NUM_OF_PORTS 1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM 0
+#define MEM_PART_SECONDARY 1
+#define MEM_PART_MURAM 2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+int qe_issue_cmd(uint cmd, uint device, u8 mcn_protocol, u32 cmd_input);
+void qe_setbrg(uint brg, uint rate);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+uint qe_muram_alloc(uint size, uint align);
+int qe_muram_free(uint offset);
+uint qe_muram_alloc_fixed(uint offset, uint size);
+void qe_muram_dump(void);
+void *qe_muram_addr(uint offset);
+/* Buffer descriptors.
+*/
+typedef struct qe_bd {
+ u16 status;
+ u16 length;
+ u32 buf;
+} __attribute__ ((packed)) qe_bd_t;
+
+#define QE_SIZEOF_BD sizeof(qe_bd_t)
+
+#define BD_STATUS_MASK 0xffff0000
+#define BD_LENGTH_MASK 0x0000ffff
+
+#define BD_BUFFER_ARG(bd) ((qe_bd_t *)bd)->buf
+#define BD_BUFFER_CLEAR(bd) out_be32(&(BD_BUFFER_ARG(bd)), 0);
+#define BD_BUFFER(bd) in_be32(&(BD_BUFFER_ARG(bd)))
+#define BD_STATUS_AND_LENGTH_SET(bd, val) out_be32((u32*)bd, val)
+#define BD_STATUS_AND_LENGTH(bd) in_be32((u32*)bd)
+#define BD_BUFFER_SET(bd, buffer) out_be32(&(BD_BUFFER_ARG(bd)), \
+ (u32)(buffer))
+/* Macro for retrieving the following BD.
+ example:
+ next = BD_GET_NEXT( currBd, bdStatus, bdBase, SIZEOF_MY_BD, T_W ) */
+#define BD_GET_NEXT( curr_bd, bd_status, bd_base, bd_len, last_bd ) \
+ ( (!((bd_status) & (last_bd))) ? ((curr_bd)+(bd_len)) : (bd_base) )
+
+/* Alignments
+*/
+#define QE_INTR_TABLE_ALIGN 16 /* ??? */
+#define QE_ALIGNMENT_OF_BD 8
+#define QE_ALIGNMENT_OF_PRAM 64
+
+/* RISC allocation
+*/
+typedef enum qe_risc_allocation {
+ QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
+ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
+ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose RISC 1 or
+ RISC 2 */
+} qe_risc_allocation_e;
+
+/* QE extended filtering Table Lookup Key Size
+*/
+typedef enum qe_fltr_tbl_lookup_key_size {
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = 0x3f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 8 bytes */
+ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = 0x5f, /* LookupKey parsed by the Generate LookupKey
+ CMD is truncated to 16 bytes */
+} qe_fltr_tbl_lookup_key_size_e;
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size
+*/
+typedef enum qe_fltr_largest_external_tbl_lookup_key_size_ {
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+ = 0x0,/* not used */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */
+ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+ = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES /* 16 bytes */
+} qe_fltr_largest_external_tbl_lookup_key_size_e;
+
+/* structure representing QE parameter RAM
+*/
+typedef struct qe_timer_tables {
+ u16 tm_base; /* QE timer table base adr */
+ u16 tm_ptr; /* QE timer table pointer */
+ u16 r_tmr; /* QE timer mode register */
+ u16 r_tmv; /* QE timer valid register */
+ u32 tm_cmd; /* QE timer cmd register */
+ u32 tm_cnt; /* QE timer internal cnt */
+} __attribute__ ((packed)) qe_timer_tables_t;
+
+#define QE_FLTR_TAD_SIZE 8
+
+/* QE extended filtering Termination Action Descriptor (TAD)
+*/
+typedef struct qe_fltr_tad {
+ u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed)) qe_fltr_tad_t;
+
+/* Communication Direction.
+*/
+typedef enum comm_dir {
+ COMM_DIR_NONE = 0,
+ COMM_DIR_RX = 1,
+ COMM_DIR_TX = 2,
+ COMM_DIR_RX_AND_TX = 3
+} comm_dir_e;
+
+/* Clocks and GRG's
+*/
+typedef enum qe_clock {
+ QE_CLK_NONE = 0
+ , QE_BRG1 /* Baud Rate Generator 1 */
+ , QE_BRG2 /* Baud Rate Generator 2 */
+ , QE_BRG3 /* Baud Rate Generator 3 */
+ , QE_BRG4 /* Baud Rate Generator 4 */
+ , QE_BRG5 /* Baud Rate Generator 5 */
+ , QE_BRG6 /* Baud Rate Generator 6 */
+ , QE_BRG7 /* Baud Rate Generator 7 */
+ , QE_BRG8 /* Baud Rate Generator 8 */
+ , QE_BRG9 /* Baud Rate Generator 9 */
+ , QE_BRG10 /* Baud Rate Generator 10 */
+ , QE_BRG11 /* Baud Rate Generator 11 */
+ , QE_BRG12 /* Baud Rate Generator 12 */
+ , QE_BRG13 /* Baud Rate Generator 13 */
+ , QE_BRG14 /* Baud Rate Generator 14 */
+ , QE_BRG15 /* Baud Rate Generator 15 */
+ , QE_BRG16 /* Baud Rate Generator 16 */
+ , QE_CLK1 /* Clock 1 */
+ , QE_CLK2 /* Clock 2 */
+ , QE_CLK3 /* Clock 3 */
+ , QE_CLK4 /* Clock 4 */
+ , QE_CLK5 /* Clock 5 */
+ , QE_CLK6 /* Clock 6 */
+ , QE_CLK7 /* Clock 7 */
+ , QE_CLK8 /* Clock 8 */
+ , QE_CLK9 /* Clock 9 */
+ , QE_CLK10 /* Clock 10 */
+ , QE_CLK11 /* Clock 11 */
+ , QE_CLK12 /* Clock 12 */
+ , QE_CLK13 /* Clock 13 */
+ , QE_CLK14 /* Clock 14 */
+ , QE_CLK15 /* Clock 15 */
+ , QE_CLK16 /* Clock 16 */
+ , QE_CLK17 /* Clock 17 */
+ , QE_CLK18 /* Clock 18 */
+ , QE_CLK19 /* Clock 19 */
+ , QE_CLK20 /* Clock 20 */
+ , QE_CLK21 /* Clock 21 */
+ , QE_CLK22 /* Clock 22 */
+ , QE_CLK23 /* Clock 23 */
+ , QE_CLK24 /* Clock 24 */
+ , QE_CLK_DUMMY
+} qe_clock_e;
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG 0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXUCR_GRANT 0x00008000
+#define QE_CMXUCR_TSA 0x00004000
+#define QE_CMXUCR_BKPT 0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG 0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12
+#define QE_CMXGCR_USBCS 0x0000000f
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG 0x00010000
+#define QE_RESET 0x80000000
+#define QE_INIT_TX_RX 0x00000000
+#define QE_INIT_RX 0x00000001
+#define QE_INIT_TX 0x00000002
+#define QE_ENTER_HUNT_MODE 0x00000003
+#define QE_STOP_TX 0x00000004
+#define QE_GRACEFUL_STOP_TX 0x00000005
+#define QE_RESTART_TX 0x00000006
+#define QE_CLOSE_RX_BD 0x00000007
+#define QE_SWITCH_COMMAND 0x00000007
+#define QE_SET_GROUP_ADDRESS 0x00000008
+#define QE_START_IDMA 0x00000009
+#define QE_MCC_STOP_RX 0x00000009
+#define QE_ATM_TRANSMIT 0x0000000a
+#define QE_HPAC_CLEAR_ALL 0x0000000b
+#define QE_GRACEFUL_STOP_RX 0x0000001a
+#define QE_RESTART_RX 0x0000001b
+#define QE_HPAC_SET_PRIORITY 0x0000010b
+#define QE_HPAC_STOP_TX 0x0000020b
+#define QE_HPAC_STOP_RX 0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b
+#define QE_HPAC_START_TX 0x0000060b
+#define QE_HPAC_START_RX 0x0000070b
+#define QE_USB_STOP_TX 0x0000000a
+#define QE_USB_RESTART_TX 0x0000000b
+#define QE_QMC_STOP_TX 0x0000000c
+#define QE_QMC_STOP_RX 0x0000000d
+#define QE_SS7_SU_FIL_RESET 0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS 0x0000000a
+#define QE_MCC_INIT_TX_RX_16 0x00000003
+#define QE_MCC_STOP_TX 0x00000004
+#define QE_MCC_INIT_TX_1 0x00000005
+#define QE_MCC_INIT_RX_1 0x00000006
+#define QE_MCC_RESET 0x00000007
+#define QE_SET_TIMER 0x00000008
+#define QE_RANDOM_NUMBER 0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT 0x00000011
+#define QE_ASSIGN_PAGE 0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013
+#define QE_START_FLOW_CONTROL 0x00000014
+#define QE_STOP_FLOW_CONTROL 0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016
+
+#define QE_ASSIGN_RISC 0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT 6
+#define QE_CR_MCN_USB_SHIFT 4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8
+#define QE_CR_SNUM_SHIFT 17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID 0x00000000
+#define QE_CR_SUBBLOCK_USB 0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000
+#define QE_CR_SUBBLOCK_MCC1 0x03800000
+#define QE_CR_SUBBLOCK_MCC2 0x03a00000
+#define QE_CR_SUBBLOCK_MCC3 0x03000000
+#define QE_CR_SUBBLOCK_IDMA1 0x02800000
+#define QE_CR_SUBBLOCK_IDMA2 0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3 0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4 0x02e00000
+#define QE_CR_SUBBLOCK_HPAC 0x01e00000
+#define QE_CR_SUBBLOCK_SPI1 0x01400000
+#define QE_CR_SUBBLOCK_SPI2 0x01600000
+#define QE_CR_SUBBLOCK_RAND 0x01c00000
+#define QE_CR_SUBBLOCK_TIMER 0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL 0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
+*/
+#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_ATM_POS 0x0A
+#define QE_CR_PROTOCOL_ETHERNET 0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
+
+/* BMR byte order
+*/
+#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
+#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
+#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
+
+/* BRG configuration register
+*/
+#define QE_BRGC_ENABLE 0x00010000
+#define QE_BRGC_DIVISOR_SHIFT 1
+#define QE_BRGC_DIVISOR_MAX 0xFFF
+#define QE_BRGC_DIV16 1
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS 0x80
+#define QE_GTCFR1_STP2 0x20
+#define QE_GTCFR1_RST2 0x10
+#define QE_GTCFR1_GM2 0x08
+#define QE_GTCFR1_GM1 0x04
+#define QE_GTCFR1_STP1 0x02
+#define QE_GTCFR1_RST1 0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1 0x02000000
+#define QE_SDSR_BER2 0x01000000
+
+#define QE_SDMR_GLB_1_MSK 0x80000000
+#define QE_SDMR_ADR_SEL 0x20000000
+#define QE_SDMR_BER1_MSK 0x02000000
+#define QE_SDMR_BER2_MSK 0x01000000
+#define QE_SDMR_EB1_MSK 0x00800000
+#define QE_SDMR_ER1_MSK 0x00080000
+#define QE_SDMR_ER2_MSK 0x00040000
+#define QE_SDMR_CEN_MASK 0x0000E000
+#define QE_SDMR_SBER_1 0x00000200
+#define QE_SDMR_SBER_2 0x00000200
+#define QE_SDMR_EB1_PR_MASK 0x000000C0
+#define QE_SDMR_ER1_PR 0x00000008
+
+#define QE_SDMR_CEN_SHIFT 13
+#define QE_SDMR_EB1_PR_SHIFT 6
+
+#define QE_SDTM_MSNUM_SHIFT 24
+
+#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+
+/* UPC
+*/
+#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
+#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */
+#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */
+#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
+
+/* UCC
+*/
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
+ must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM
+*/
+typedef struct ucc_slow_pram {
+ u16 rbase; /* RX BD base address */
+ u16 tbase; /* TX BD base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ u16 mrblr; /* Rx buffer length */
+ u32 rstate; /* Rx internal state */
+ u32 rptr; /* Rx internal data pointer */
+ u16 rbptr; /* rb BD Pointer */
+ u16 rcount; /* Rx internal byte count */
+ u32 rtemp; /* Rx temp */
+ u32 tstate; /* Tx internal state */
+ u32 tptr; /* Tx internal data pointer */
+ u16 tbptr; /* Tx BD pointer */
+ u16 tcount; /* Tx byte count */
+ u32 ttemp; /* Tx temp */
+ u32 rcrc; /* temp receive CRC */
+ u32 tcrc; /* temp transmit CRC */
+} __attribute__ ((packed)) ucc_slow_pram_t;
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL)
+*/
+#define UCC_SLOW_GUMR_H_CRC16 0x00004000
+#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
+#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_REVD 0x00002000
+#define UCC_SLOW_GUMR_H_TRX 0x00001000
+#define UCC_SLOW_GUMR_H_TTX 0x00000800
+#define UCC_SLOW_GUMR_H_CDP 0x00000400
+#define UCC_SLOW_GUMR_H_CTSP 0x00000200
+#define UCC_SLOW_GUMR_H_CDS 0x00000100
+#define UCC_SLOW_GUMR_H_CTSS 0x00000080
+#define UCC_SLOW_GUMR_H_TFL 0x00000040
+#define UCC_SLOW_GUMR_H_RFW 0x00000020
+#define UCC_SLOW_GUMR_H_TXSY 0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC 0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC 0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM 0x00000002
+#define UCC_SLOW_GUMR_H_RSYN 0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI 0x10000000
+#define UCC_SLOW_GUMR_L_RINV 0x02000000
+#define UCC_SLOW_GUMR_L_TINV 0x01000000
+#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_ENR 0x00000020
+#define UCC_SLOW_GUMR_L_ENT 0x00000010
+
+/* General UCC FAST Mode Register
+*/
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* Slow UCC Event Register (UCCE)
+*/
+#define UCC_SLOW_UCCE_GLR 0x1000
+#define UCC_SLOW_UCCE_GLT 0x0800
+#define UCC_SLOW_UCCE_DCC 0x0400
+#define UCC_SLOW_UCCE_FLG 0x0200
+#define UCC_SLOW_UCCE_AB 0x0200
+#define UCC_SLOW_UCCE_IDLE 0x0100
+#define UCC_SLOW_UCCE_GRA 0x0080
+#define UCC_SLOW_UCCE_TXE 0x0010
+#define UCC_SLOW_UCCE_RXF 0x0008
+#define UCC_SLOW_UCCE_CCR 0x0008
+#define UCC_SLOW_UCCE_RCH 0x0008
+#define UCC_SLOW_UCCE_BSY 0x0004
+#define UCC_SLOW_UCCE_TXB 0x0002
+#define UCC_SLOW_UCCE_TX 0x0002
+#define UCC_SLOW_UCCE_RX 0x0001
+#define UCC_SLOW_UCCE_GOV 0x0001
+#define UCC_SLOW_UCCE_GUN 0x0002
+#define UCC_SLOW_UCCE_GINT 0x0004
+#define UCC_SLOW_UCCE_IQOV 0x0008
+
+#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF| \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF)
+#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY|UCC_SLOW_UCCE_GRA| \
+ UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \
+ UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR)
+#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV|UCC_SLOW_UCCE_GINT| \
+ UCC_SLOW_UCCE_GUN|UCC_SLOW_UCCE_GOV)
+
+#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \
+ UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT| \
+ UCC_SLOW_UCCE_GLR)
+
+#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
+#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
+#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+
+/* Transmit On Demand (UTORD)
+*/
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Function code masks.
+*/
+#define FC_GBL 0x20
+#define FC_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_GBL 0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
+
+#endif /* __QE_H__ */
+#endif /* __KERNEL__ */
^ permalink raw reply related
* [PATCH 3/11] qe_lib: Add QE interrupt controller driver
From: Li Yang @ 2006-09-21 12:18 UTC (permalink / raw)
To: linuxppc-dev
The QEIC is updated to use genirq and Ben's interrupt mapping.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/qe_lib/qe_ic.c | 554 ++++++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/qe_lib/qe_ic.h | 105 +++++++
include/asm-powerpc/qe_ic.h | 87 ++++++
3 files changed, 746 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
new file mode 100644
index 0000000..9fb95e9
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -0,0 +1,554 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * Description:
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/qe_ic.h>
+
+#include "qe_ic.h"
+
+static DEFINE_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile u32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile u32 __iomem * base, unsigned int reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_desc[virq].chip_data;
+}
+
+#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+static void qe_ic_unmask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq_and_ack(unsigned int virq)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ unsigned long flags;
+ u32 temp;
+
+ spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* There is nothing to do for ack here, ack is handled in ISR */
+
+ spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .typename = " QEIC ",
+ .unmask = qe_ic_unmask_irq,
+ .mask = qe_ic_mask_irq,
+ .mask_ack = qe_ic_mask_irq_and_ack,
+};
+
+static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
+{
+ struct qe_ic *qe_ic = h->host_data;
+
+ /* Exact match, unless qe_ic node is NULL */
+ return qe_ic->of_node == NULL || qe_ic->of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ \n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ set_irq_chip_data(virq, qe_ic);
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+
+ set_irq_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 * intspec, unsigned int intsize,
+ irq_hw_number_t * out_hwirq,
+ unsigned int *out_flags)
+{
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static struct irq_host_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = qe_ic_host_xlate,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic, struct pt_regs *regs)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* FIXME: We mask all the QE Low interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+/* FIXME: We mask all the QE High interrupts while handling. We should
+ * let other interrupt come in, but BAD interrupts are generated */
+void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ struct qe_ic *qe_ic = desc->handler_data;
+ struct irq_chip *chip = irq_desc[irq].chip;
+
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic, regs);
+
+ chip->mask_ack(irq);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ chip->unmask(irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags)
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ if (qe_ic == NULL)
+ return;
+
+ memset(qe_ic, 0, sizeof(struct qe_ic));
+ qe_ic->of_node = node ? of_node_get(node) : NULL;
+
+ qe_ic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+ NR_QE_IC_INTS, &qe_ic_host_ops, 0);
+ if (qe_ic->irqhost == NULL) {
+ of_node_put(node);
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
+
+ qe_ic->irqhost->host_data = qe_ic;
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ set_irq_data(qe_ic->virq_low, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_low, qe_ic_cascade_low);
+
+ if (qe_ic->virq_high != NO_IRQ) {
+ set_irq_data(qe_ic->virq_high, qe_ic);
+ set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
+ }
+
+ printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (src > 127)
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case (QEIC_CIPZCC):
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case (QEIC_CIPWCC):
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case (QEIC_CIPYCC):
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case (QEIC_CIPXCC):
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case (QEIC_CIPRTA):
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case (QEIC_CIPRTB):
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct sysdev_class qe_ic_sysclass = {
+ set_kset_name("qe_ic"),
+};
+
+static struct sys_device device_qe_ic = {
+ .id = 0,
+ .cls = &qe_ic_sysclass,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = sysdev_class_register(&qe_ic_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
new file mode 100644
index 0000000..33612c8
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Based on code from Shlomi Gridish <gridish@freescale.com>
+ *
+ * Description:
+ * QUICC ENGINE Interrupt Controller Header
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __QE_IC_H__
+#define __QE_IC_H__
+
+#include <asm/qe_ic.h>
+
+#define NR_QE_IC_INTS 128
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_host *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* The device node of the interrupt controller */
+ struct device_node *of_node;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ u32 mask; /* location of this source at the QIMR register. */
+ u32 mask_reg; /* Mask register offset */
+ u8 pri_code; /* for grouped interrupts sources - the interrupt
+ code as appears at the group priority register. */
+ u32 pri_reg; /* Group priority register offset */
+};
+
+#endif /* __QE_IC_H__ */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
new file mode 100644
index 0000000..294ee19
--- /dev/null
+++ b/include/asm-powerpc/qe_ic.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_QE_IC_H__
+#define __ASM_QE_IC_H__
+
+#include <linux/irq.h>
+
+#define _IO_BASE isa_io_base
+#define _ISA_MEM_BASE isa_mem_base
+#ifdef CONFIG_PCI
+#define PCI_DRAM_OFFSET pci_dram_offset
+#else
+#define PCI_DRAM_OFFSET 0
+#endif
+
+#define NUM_OF_QE_IC_GROUPS 6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W 0x00000001
+#define QE_IC_SPREADMODE_GRP_X 0x00000002
+#define QE_IC_SPREADMODE_GRP_Y 0x00000004
+#define QE_IC_SPREADMODE_GRP_Z 0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
+
+#define QE_IC_LOW_SIGNAL 0x00000100
+#define QE_IC_HIGH_SIGNAL 0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
+
+/*
+ * QE interrupt sources groups
+ */
+enum qe_ic_grp_id {
+ QE_IC_GRP_W = 0, /* QE interrupt controller group W */
+ QE_IC_GRP_X, /* QE interrupt controller group X */
+ QE_IC_GRP_Y, /* QE interrupt controller group Y */
+ QE_IC_GRP_Z, /* QE interrupt controller group Z */
+ QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
+ QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
+};
+
+/*********************************************/
+/****** QE IC API routines *****/
+/*********************************************/
+void qe_ic_init(struct device_node *node, unsigned int flags);
+
+/* qe_ic_modify_highest_priority
+ * Optional, used to change default. This routine defines a single interrupt
+ * source to be highest priority. It may be called at any stage, thus enabling
+ * dynamic change of the highest priority interrupt.
+ * In default, Highest priority is XCC1 highest priority interrupt source.
+ *
+ * virq: Interrupt source number
+ * high: Use high signal?
+ */
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+#endif /* __ASM_QE_IC_H__ */
+#endif /* __KERNEL__ */
^ permalink raw reply related
* [PATCH 4/11] qe_lib: Add QE I/O ports API
From: Li Yang @ 2006-09-21 12:18 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/qe_lib/qe_io.c | 272 ++++++++++++++++++++++++++++++++++++
1 files changed, 272 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
new file mode 100644
index 0000000..e905d35
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *
+ * Description:
+ * QE Parallel I/O ports configuration routines. Based on code from
+ * Shlomi Gridish <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+#undef DEBUG
+
+#define NUM_OF_PINS 32
+#define NUM_OF_PAR_IOS 7
+
+typedef struct par_io {
+ struct {
+ u32 cpodr; /* Open drain register */
+ u32 cpdata; /* Data register */
+ u32 cpdir1; /* Direction register */
+ u32 cpdir2; /* Direction register */
+ u32 cppar1; /* Pin assignment register */
+ u32 cppar2; /* Pin assignment register */
+ } io_regs[NUM_OF_PAR_IOS];
+} par_io_t;
+
+typedef struct qe_par_io {
+ u8 res[0xc];
+ u32 cepier; /* QE ports interrupt event register */
+ u32 cepimr; /* QE ports mask event register */
+ u32 cepicr; /* QE ports control event register */
+} qe_par_io_t;
+
+static int qe_irq_ports[NUM_OF_PAR_IOS][NUM_OF_PINS] = {
+ /* 0-7 */ /* 8-15 */ /* 16 - 23 */ /* 24 - 31 */
+ {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,1, 1,0,0,0,0,0,0,0, 0,0,0,0,0,1,1,0},
+ {0,0,0,1,0,1,0,0, 0,0,0,0,1,1,0,0, 0,0,0,0,0,0,0,0, 0,0,1,1,0,0,0,0},
+ {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,1,1,1,0,0},
+ {0,0,0,0,0,0,0,0, 0,0,0,0,1,1,0,0, 1,1,0,0,0,0,0,0, 0,0,1,1,0,0,0,0},
+ {0,0,0,0,0,0,0,0, 0,0,0,0,1,1,0,0, 0,0,0,0,0,0,0,0, 1,1,1,1,0,0,0,1},
+ {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,1,0,0,0, 0,0,0,0,0,0,0,0},
+ {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,1}
+};
+
+
+static u8 get_irq_num(u8 port, u8 pin)
+{
+ int i, j;
+ u8 num = 0;
+
+ if (qe_irq_ports[port][pin] == 0)
+ return -1;
+ for (j = 0; j <= port; j++)
+ for (i = 0; i < pin; i++)
+ if (qe_irq_ports[j][i])
+ num++;
+ return num;
+}
+
+static par_io_t *par_io = NULL;
+static qe_par_io_t *qe_par_io = NULL;
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+ int assignment, int has_irq)
+{
+ u32 pinMask1bit, pinMask2bits, newMask2bits, tmp_val;
+
+ if (!par_io) {
+ par_io = (par_io_t *) ioremap(get_immrbase() + 0x1400,
+ sizeof(par_io_t));
+ qe_par_io = (qe_par_io_t *) ioremap(get_immrbase() + 0xC00,
+ sizeof(qe_par_io_t));
+
+ /* clear event bits in the event register of the QE ports */
+ out_be32(&qe_par_io->cepier, 0xFFFFFFFF);
+ }
+
+ /* calculate pin location for single and 2 bits information */
+ pinMask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+
+ /* Set open drain, if required */
+ tmp_val = in_be32(&par_io->io_regs[port].cpodr);
+ if (open_drain)
+ out_be32(&par_io->io_regs[port].cpodr, pinMask1bit | tmp_val);
+ else
+ out_be32(&par_io->io_regs[port].cpodr, ~pinMask1bit & tmp_val);
+
+ /* define direction */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io->io_regs[port].cpdir2) :
+ in_be32(&par_io->io_regs[port].cpdir1);
+
+ /* get all bits mask for 2 bit per port */
+ pinMask2bits = (u32) (0x3 <<
+ (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* Get the final mask we need for the right definition */
+ newMask2bits = (u32) (dir <<
+ (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io->io_regs[port].cpdir2,
+ ~pinMask2bits & tmp_val);
+ tmp_val &= ~pinMask2bits;
+ out_be32(&par_io->io_regs[port].cpdir2, newMask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->io_regs[port].cpdir1,
+ ~pinMask2bits & tmp_val);
+ tmp_val &= ~pinMask2bits;
+ out_be32(&par_io->io_regs[port].cpdir1, newMask2bits | tmp_val);
+ }
+ /* define pin assignment */
+ tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
+ in_be32(&par_io->io_regs[port].cppar2) :
+ in_be32(&par_io->io_regs[port].cppar1);
+
+ newMask2bits = (u32) (assignment << (NUM_OF_PINS -
+ (pin % (NUM_OF_PINS / 2) + 1) * 2));
+ /* clear and set 2 bits mask */
+ if (pin > (NUM_OF_PINS / 2) - 1) {
+ out_be32(&par_io->io_regs[port].cppar2,
+ ~pinMask2bits & tmp_val);
+ tmp_val &= ~pinMask2bits;
+ out_be32(&par_io->io_regs[port].cppar2, newMask2bits | tmp_val);
+ } else {
+ out_be32(&par_io->io_regs[port].cppar1,
+ ~pinMask2bits & tmp_val);
+ tmp_val &= ~pinMask2bits;
+ out_be32(&par_io->io_regs[port].cppar1, newMask2bits | tmp_val);
+ }
+
+ /* Set interrupt mask if the pin generates interrupt */
+ if (has_irq) {
+ int irq = get_irq_num(port, pin);
+ u32 mask = 0;
+
+ if (irq == -1) {
+ printk(KERN_WARNING "Port %d, pin %d is can't be "
+ "interrupt\n", port, pin);
+ return -EINVAL;
+ }
+ mask = 0x80000000 >> irq;
+
+ tmp_val = in_be32(&qe_par_io->cepimr);
+ out_be32(&qe_par_io->cepimr, mask | tmp_val);
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(par_io_config_pin);
+
+int par_io_data_set(u8 port, u8 pin, u8 val)
+{
+ u32 pin_mask, tmp_val;
+
+ if (port >= NUM_OF_PAR_IOS)
+ return -EINVAL;
+ if (pin >= NUM_OF_PINS)
+ return -EINVAL;
+ /* calculate pin location */
+ pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+
+ tmp_val = in_be32(&par_io->io_regs[port].cpdata);
+
+ if (val == 0) /* clear */
+ out_be32(&par_io->io_regs[port].cpdata, ~pin_mask & tmp_val);
+ else /* set */
+ out_be32(&par_io->io_regs[port].cpdata, pin_mask | tmp_val);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(par_io_data_set);
+
+int par_io_of_config(struct device_node *np)
+{
+ struct device_node *pio;
+ phandle *ph;
+ int pio_map_len;
+ unsigned int *pio_map;
+
+ ph = (phandle *) get_property(np, "pio-handle", NULL);
+ if (ph == 0) {
+ printk(KERN_ERR "pio-handle not available \n");
+ return -1;
+ }
+
+ pio = of_find_node_by_phandle(*ph);
+
+ pio_map = (unsigned int *)
+ get_property(pio, "pio-map", &pio_map_len);
+ if (pio_map == NULL) {
+ printk(KERN_ERR "pio-map is not set! \n");
+ return -1;
+ }
+ pio_map_len /= sizeof(unsigned int);
+ if ((pio_map_len % 6) != 0) {
+ printk(KERN_ERR "pio-map format wrong! \n");
+ return -1;
+ }
+
+ while (pio_map_len > 0) {
+ par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
+ (int) pio_map[2], (int) pio_map[3],
+ (int) pio_map[4], (int) pio_map[5]);
+ pio_map += 6;
+ pio_map_len -= 6;
+ }
+ of_node_put(pio);
+ return 0;
+}
+EXPORT_SYMBOL(par_io_of_config);
+
+#ifdef DEBUG
+static void dump_par_io(void)
+{
+ int i;
+
+ printk(KERN_INFO "PAR IO registars:\n");
+ printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+ for (i = 0; i < NUM_OF_PAR_IOS; i++) {
+ printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cpodr,
+ in_be32(&par_io->io_regs[i].cpodr));
+ printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cpdata,
+ in_be32(&par_io->io_regs[i].cpdata));
+ printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cpdir1,
+ in_be32(&par_io->io_regs[i].cpdir1));
+ printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cpdir2,
+ in_be32(&par_io->io_regs[i].cpdir2));
+ printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cppar1,
+ in_be32(&par_io->io_regs[i].cppar1));
+ printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
+ i, (u32) & par_io->io_regs[i].cppar2,
+ in_be32(&par_io->io_regs[i].cppar2));
+ }
+
+ printk(KERN_INFO "QE PAR IO registars:\n");
+ printk(KERN_INFO "Base address: 0x%08x\n", (u32) qe_par_io);
+ printk(KERN_INFO "cepier : addr - 0x%08x, val - 0x%08x\n",
+ (u32) & qe_par_io->cepier, in_be32(&qe_par_io->cepier));
+ printk(KERN_INFO "cepimr : addr - 0x%08x, val - 0x%08x\n",
+ (u32) & qe_par_io->cepimr, in_be32(&qe_par_io->cepimr));
+ printk(KERN_INFO "cepicr : addr - 0x%08x, val - 0x%08x\n",
+ (u32) & qe_par_io->cepicr, in_be32(&qe_par_io->cepicr));
+}
+
+EXPORT_SYMBOL(dump_par_io);
+#endif
^ permalink raw reply related
* [PATCH 5/11] qe_lib: Add UCC common API
From: Li Yang @ 2006-09-21 12:19 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/qe_lib/ucc.c | 346 ++++++++++++++++++++++++++++
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 408 +++++++++++++++++++++++++++++++++
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 406 +++++++++++++++++++++++++++++++++
include/asm-powerpc/ucc.h | 84 +++++++
include/asm-powerpc/ucc_fast.h | 259 +++++++++++++++++++++
include/asm-powerpc/ucc_slow.h | 304 +++++++++++++++++++++++++
6 files changed, 1807 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
new file mode 100644
index 0000000..d24eb1f
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC API Set - UCC specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+
+static DEFINE_SPINLOCK(ucc_lock);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucc_lock, flags);
+ out_be32(&qe_immr->qmx.cmxgcr,
+ ((in_be32(&qe_immr->qmx.cmxgcr) &
+ ~QE_CMXGCR_MII_ENET_MNG) |
+ (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ spin_unlock_irqrestore(&ucc_lock, flags);
+
+ return 0;
+}
+
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed)
+{
+ u8 guemr = 0;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ guemr = regs->guemr;
+ guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
+ switch (speed) {
+ case UCC_SPEED_TYPE_SLOW:
+ guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+ break;
+ case UCC_SPEED_TYPE_FAST:
+ guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+ break;
+ default:
+ return -EINVAL;
+ }
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+int ucc_init_guemr(struct ucc_common *regs)
+{
+ u8 guemr = 0;
+
+ if (!regs)
+ return -EINVAL;
+
+ /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
+ guemr = UCC_GUEMR_SET_RESERVED3;
+
+ regs->guemr = guemr;
+
+ return 0;
+}
+
+static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
+ u8 * shift)
+{
+ switch (ucc_num) {
+ case (0):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case (2):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case (4):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case (6):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case (1):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case (3):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case (5):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case (7):
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ if (set)
+ out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ else
+ out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+
+ return 0;
+}
+
+int ucc_set_qe_mux_rxtx(int ucc_num, qe_clock_e clock, comm_dir_e mode)
+{
+ volatile u32 *p_cmxucr;
+ u8 reg_num;
+ u8 shift;
+ u32 clockBits;
+ u32 clockMask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ return -EINVAL;
+ }
+
+ get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case (1):
+ switch (clock) {
+ case (QE_BRG1):
+ source = 1;
+ break;
+ case (QE_BRG2):
+ source = 2;
+ break;
+ case (QE_BRG7):
+ source = 3;
+ break;
+ case (QE_BRG8):
+ source = 4;
+ break;
+ case (QE_CLK9):
+ source = 5;
+ break;
+ case (QE_CLK10):
+ source = 6;
+ break;
+ case (QE_CLK11):
+ source = 7;
+ break;
+ case (QE_CLK12):
+ source = 8;
+ break;
+ case (QE_CLK15):
+ source = 9;
+ break;
+ case (QE_CLK16):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (2):
+ switch (clock) {
+ case (QE_BRG5):
+ source = 1;
+ break;
+ case (QE_BRG6):
+ source = 2;
+ break;
+ case (QE_BRG7):
+ source = 3;
+ break;
+ case (QE_BRG8):
+ source = 4;
+ break;
+ case (QE_CLK13):
+ source = 5;
+ break;
+ case (QE_CLK14):
+ source = 6;
+ break;
+ case (QE_CLK19):
+ source = 7;
+ break;
+ case (QE_CLK20):
+ source = 8;
+ break;
+ case (QE_CLK15):
+ source = 9;
+ break;
+ case (QE_CLK16):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (3):
+ switch (clock) {
+ case (QE_BRG9):
+ source = 1;
+ break;
+ case (QE_BRG10):
+ source = 2;
+ break;
+ case (QE_BRG15):
+ source = 3;
+ break;
+ case (QE_BRG16):
+ source = 4;
+ break;
+ case (QE_CLK3):
+ source = 5;
+ break;
+ case (QE_CLK4):
+ source = 6;
+ break;
+ case (QE_CLK17):
+ source = 7;
+ break;
+ case (QE_CLK18):
+ source = 8;
+ break;
+ case (QE_CLK7):
+ source = 9;
+ break;
+ case (QE_CLK8):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ case (4):
+ switch (clock) {
+ case (QE_BRG13):
+ source = 1;
+ break;
+ case (QE_BRG14):
+ source = 2;
+ break;
+ case (QE_BRG15):
+ source = 3;
+ break;
+ case (QE_BRG16):
+ source = 4;
+ break;
+ case (QE_CLK5):
+ source = 5;
+ break;
+ case (QE_CLK6):
+ source = 6;
+ break;
+ case (QE_CLK21):
+ source = 7;
+ break;
+ case (QE_CLK22):
+ source = 8;
+ break;
+ case (QE_CLK7):
+ source = 9;
+ break;
+ case (QE_CLK8):
+ source = 10;
+ break;
+ default:
+ source = -1;
+ break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printk(KERN_ERR
+ "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ return -ENOENT;
+ }
+
+ clockBits = (u32) source;
+ clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clockBits <<= shift;
+ clockMask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
new file mode 100644
index 0000000..95c070f
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+
+#define uccf_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccf_dbg(format, arg...) \
+ uccf_printk(KERN_DEBUG , format , ## arg)
+#define uccf_err(format, arg...) \
+ uccf_printk(KERN_ERR , format , ## arg)
+#define uccf_info(format, arg...) \
+ uccf_printk(KERN_INFO , format , ## arg)
+#define uccf_warn(format, arg...) \
+ uccf_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCF_VERBOSE_DEBUG
+#define uccf_vdbg uccf_dbg
+#else
+#define uccf_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCF_VERBOSE_DEBUG */
+
+void ucc_fast_dump_regs(ucc_fast_private_t * uccf)
+{
+ uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+
+ uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->urfset,
+ in_be16(&uccf->uf_regs->urfset));
+ uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
+{
+ switch (uccf_num) {
+ case (0):
+ return (QE_CR_SUBBLOCK_UCCFAST1);
+ case (1):
+ return (QE_CR_SUBBLOCK_UCCFAST2);
+ case (2):
+ return (QE_CR_SUBBLOCK_UCCFAST3);
+ case (3):
+ return (QE_CR_SUBBLOCK_UCCFAST4);
+ case (4):
+ return (QE_CR_SUBBLOCK_UCCFAST5);
+ case (5):
+ return (QE_CR_SUBBLOCK_UCCFAST6);
+ case (6):
+ return (QE_CR_SUBBLOCK_UCCFAST7);
+ case (7):
+ return (QE_CR_SUBBLOCK_UCCFAST8);
+ default:
+ return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_fast_transmit_on_demand(ucc_fast_private_t * uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+void ucc_fast_enable(ucc_fast_private_t * uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(ucc_fast_private_t * uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(ucc_fast_info_t * uf_info, ucc_fast_private_t ** uccf_ret)
+{
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+ u32 gumr = 0;
+ int ret;
+
+ uccf_vdbg("%s: IN", __FUNCTION__);
+
+ if (!uf_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccf_err("ucc_fast_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Check that 'max_rx_buf_length' is properly aligned (4). */
+ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ /* Validate Virtual Fifo register values */
+ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ return -EINVAL;
+ }
+
+ if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+ uccf_err
+ ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ return -EINVAL;
+ }
+
+ uccf =
+ (ucc_fast_private_t *) kmalloc(sizeof(ucc_fast_private_t),
+ GFP_KERNEL);
+ if (!uccf) {
+ uccf_err
+ ("ucc_fast_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(ucc_fast_private_t));
+
+ /* Fill fast UCC structure */
+ uccf->uf_info = uf_info;
+ /* Set the PHY base address */
+ uccf->uf_regs =
+ (ucc_fast_t *) ioremap(uf_info->regs, sizeof(ucc_fast_t));
+ if (uccf->uf_regs == NULL) {
+ uccf_err
+ ("ucc_fast_init: No memory map for UCC slow controller!");
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+ uccf->stopped_tx = 0;
+ uccf->stopped_rx = 0;
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) & (uf_regs->ucce);
+ uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef STATISTICS
+ uccf->tx_frames = 0;
+ uccf->rx_frames = 0;
+ uccf->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((ucc_common_t *) (uf_regs)))) {
+ uccf_err("ucc_fast_init: Could not init the guemr register.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ /* Set UCC to fast type */
+ if ((ret = ucc_set_type(uf_info->ucc_num,
+ (ucc_common_t *) (uf_regs),
+ UCC_SPEED_TYPE_FAST))) {
+ uccf_err("ucc_fast_init: Could not set type to fast.");
+ ucc_fast_free(uccf);
+ return ret;
+ }
+
+ uccf->mrblr = uf_info->max_rx_buf_length;
+
+ /* Set GUMR. */
+ /* For more details see the hardware spec. */
+ /* gumr starts as zero. */
+ if (uf_info->tci)
+ gumr |= UCC_FAST_GUMR_TCI;
+ gumr |= uf_info->ttx_trx;
+ if (uf_info->cdp)
+ gumr |= UCC_FAST_GUMR_CDP;
+ if (uf_info->ctsp)
+ gumr |= UCC_FAST_GUMR_CTSP;
+ if (uf_info->cds)
+ gumr |= UCC_FAST_GUMR_CDS;
+ if (uf_info->ctss)
+ gumr |= UCC_FAST_GUMR_CTSS;
+ if (uf_info->txsy)
+ gumr |= UCC_FAST_GUMR_TXSY;
+ if (uf_info->rsyn)
+ gumr |= UCC_FAST_GUMR_RSYN;
+ gumr |= uf_info->synl;
+ if (uf_info->rtsm)
+ gumr |= UCC_FAST_GUMR_RTSM;
+ gumr |= uf_info->renc;
+ if (uf_info->revd)
+ gumr |= UCC_FAST_GUMR_REVD;
+ gumr |= uf_info->tenc;
+ gumr |= uf_info->tcrc;
+ gumr |= uf_info->mode;
+ out_be32(&uf_regs->gumr, gumr);
+
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_tx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(uf_info->urfs +
+ (u32)
+ UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ uccf_err
+ ("ucc_fast_init: Can not allocate MURAM memory for "
+ "ucc_fast_rx_virtual_fifo_base_offset.");
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ ucc_fast_free(uccf);
+ return -ENOMEM;
+ }
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, uf_info->urfs);
+ out_be16(&uf_regs->urfet, uf_info->urfet);
+ out_be16(&uf_regs->urfset, uf_info->urfset);
+ out_be16(&uf_regs->utfs, uf_info->utfs);
+ out_be16(&uf_regs->utfet, uf_info->utfet);
+ out_be16(&uf_regs->utftt, uf_info->utftt);
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!uf_info->tsa) {
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_qe_mux_rxtx
+ (uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ uccf_err
+ ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
+ ucc_fast_free(uccf);
+ return -EINVAL;
+ }
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
+
+void ucc_fast_free(ucc_fast_private_t * uccf)
+{
+ if (!uccf)
+ return;
+
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ kfree(uccf);
+}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
new file mode 100644
index 0000000..fbddb61
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE UCC Slow API Set - UCC Slow specific routines implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include <asm/ucc.h>
+#include <asm/ucc_slow.h>
+
+#define uccs_printk(level, format, arg...) \
+ printk(level format "\n", ## arg)
+
+#define uccs_dbg(format, arg...) \
+ uccs_printk(KERN_DEBUG , format , ## arg)
+#define uccs_err(format, arg...) \
+ uccs_printk(KERN_ERR , format , ## arg)
+#define uccs_info(format, arg...) \
+ uccs_printk(KERN_INFO , format , ## arg)
+#define uccs_warn(format, arg...) \
+ uccs_printk(KERN_WARNING , format , ## arg)
+
+#ifdef UCCS_VERBOSE_DEBUG
+#define uccs_vdbg uccs_dbg
+#else
+#define uccs_vdbg(fmt, args...) do { } while (0)
+#endif /* UCCS_VERBOSE_DEBUG */
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
+{
+ switch (uccs_num) {
+ case (0):
+ return (QE_CR_SUBBLOCK_UCCSLOW1);
+ case (1):
+ return (QE_CR_SUBBLOCK_UCCSLOW2);
+ case (2):
+ return (QE_CR_SUBBLOCK_UCCSLOW3);
+ case (3):
+ return (QE_CR_SUBBLOCK_UCCSLOW4);
+ case (4):
+ return (QE_CR_SUBBLOCK_UCCSLOW5);
+ case (5):
+ return (QE_CR_SUBBLOCK_UCCSLOW6);
+ case (6):
+ return (QE_CR_SUBBLOCK_UCCSLOW7);
+ case (7):
+ return (QE_CR_SUBBLOCK_UCCSLOW8);
+ default:
+ return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+void ucc_slow_poll_transmitter_now(ucc_slow_private_t * uccs)
+{
+ out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
+}
+
+void ucc_slow_graceful_stop_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED,
+ 0);
+}
+
+void ucc_slow_stop_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_STOP_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_restart_tx(ucc_slow_private_t * uccs)
+{
+ ucc_slow_info_t *us_info = uccs->us_info;
+ u32 id;
+
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+}
+
+void ucc_slow_enable(ucc_slow_private_t * uccs, comm_dir_e mode)
+{
+ ucc_slow_t *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l |= UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 1;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+void ucc_slow_disable(ucc_slow_private_t * uccs, comm_dir_e mode)
+{
+ ucc_slow_t *us_regs;
+ u32 gumr_l;
+
+ us_regs = uccs->us_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr_l = in_be32(&us_regs->gumr_l);
+ if (mode & COMM_DIR_TX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
+ uccs->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
+ uccs->enabled_rx = 0;
+ }
+ out_be32(&us_regs->gumr_l, gumr_l);
+}
+
+int ucc_slow_init(ucc_slow_info_t * us_info, ucc_slow_private_t ** uccs_ret)
+{
+ u32 i;
+ ucc_slow_t *us_regs;
+ u32 gumr;
+ u8 function_code = 0;
+ u8 *bd;
+ ucc_slow_private_t *uccs;
+ u32 id;
+ u32 command;
+ int ret;
+
+ uccs_vdbg("%s: IN", __FUNCTION__);
+
+ if (!us_info)
+ return -EINVAL;
+
+ /* check if the UCC port number is in range. */
+ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+ uccs_err("ucc_slow_init: Illagal UCC number!");
+ return -EINVAL;
+ }
+
+ /* Set mrblr */
+ /* Check that 'max_rx_buf_length' is properly aligned (4), unless
+ rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ case when QE accepts 32 bits at a time. */
+ if ((!us_info->rfw)
+ && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
+ uccs_err("max_rx_buf_length not aligned.");
+ return -EINVAL;
+ }
+
+ uccs =
+ (ucc_slow_private_t *) kmalloc(sizeof(ucc_slow_private_t),
+ GFP_KERNEL);
+ if (!uccs) {
+ uccs_err
+ ("ucc_slow_init: No memory for UCC slow data structure!");
+ return -ENOMEM;
+ }
+ memset(uccs, 0, sizeof(ucc_slow_private_t));
+
+ /* Fill slow UCC structure */
+ uccs->us_info = us_info;
+ uccs->saved_uccm = 0;
+ uccs->p_rx_frame = 0;
+ uccs->us_regs = us_info->us_regs;
+ us_regs = uccs->us_regs;
+ uccs->p_ucce = (u16 *) & (us_regs->ucce);
+ uccs->p_uccm = (u16 *) & (us_regs->uccm);
+#ifdef STATISTICS
+ uccs->rx_frames = 0;
+ uccs->tx_frames = 0;
+ uccs->rx_discarded = 0;
+#endif /* STATISTICS */
+
+ /* Get PRAM base */
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+ uccs_err
+ ("ucc_slow_init: Can not allocate MURAM memory " \
+ "for Slow UCC.");
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ (u32) uccs->us_pram_offset);
+
+ uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
+
+ /* Init Guemr register */
+ if ((ret = ucc_init_guemr((ucc_common_t *) (us_info->us_regs)))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ /* Set UCC to slow type */
+ if ((ret = ucc_set_type(us_info->ucc_num,
+ (ucc_common_t *) (us_info->us_regs),
+ UCC_SPEED_TYPE_SLOW))) {
+ uccs_err("ucc_slow_init: Could not init the guemr register.");
+ ucc_slow_free(uccs);
+ return ret;
+ }
+
+ out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+
+ INIT_LIST_HEAD(&uccs->confQ);
+
+ /* Allocate BDs. */
+ uccs->rx_base_offset =
+ qe_muram_alloc(us_info->rx_bd_ring_len * UCC_SLOW_SIZE_OF_BD,
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ uccs->rx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ uccs->tx_base_offset =
+ qe_muram_alloc(us_info->tx_bd_ring_len * UCC_SLOW_SIZE_OF_BD,
+ QE_ALIGNMENT_OF_BD);
+ if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+ uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ uccs->tx_base_offset = 0;
+ ucc_slow_free(uccs);
+ return -ENOMEM;
+ }
+
+ /* Init Tx bds */
+ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
+ for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ BD_BUFFER_CLEAR(bd);
+ BD_STATUS_AND_LENGTH_SET(bd, 0);
+ bd += QE_SIZEOF_BD;
+ }
+ bd -= QE_SIZEOF_BD;
+ BD_STATUS_AND_LENGTH_SET(bd, T_W); /* for last BD set Wrap bit */
+
+ /* Init Rx bds */
+ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
+ for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ BD_STATUS_AND_LENGTH_SET(bd, 0);
+ BD_BUFFER_CLEAR(bd);
+ bd += QE_SIZEOF_BD;
+ }
+ bd -= QE_SIZEOF_BD;
+ BD_STATUS_AND_LENGTH_SET(bd, R_W); /* for last BD set Wrap bit */
+
+ /* Set GUMR (For more details see the hardware spec.). */
+ /* gumr_h */
+ gumr = 0;
+ gumr |= us_info->tcrc;
+ if (us_info->cdp)
+ gumr |= UCC_SLOW_GUMR_H_CDP;
+ if (us_info->ctsp)
+ gumr |= UCC_SLOW_GUMR_H_CTSP;
+ if (us_info->cds)
+ gumr |= UCC_SLOW_GUMR_H_CDS;
+ if (us_info->ctss)
+ gumr |= UCC_SLOW_GUMR_H_CTSS;
+ if (us_info->tfl)
+ gumr |= UCC_SLOW_GUMR_H_TFL;
+ if (us_info->rfw)
+ gumr |= UCC_SLOW_GUMR_H_RFW;
+ if (us_info->txsy)
+ gumr |= UCC_SLOW_GUMR_H_TXSY;
+ if (us_info->rtsm)
+ gumr |= UCC_SLOW_GUMR_H_RTSM;
+ out_be32(&us_regs->gumr_h, gumr);
+
+ /* gumr_l */
+ gumr = 0;
+ if (us_info->tci)
+ gumr |= UCC_SLOW_GUMR_L_TCI;
+ if (us_info->rinv)
+ gumr |= UCC_SLOW_GUMR_L_RINV;
+ if (us_info->tinv)
+ gumr |= UCC_SLOW_GUMR_L_TINV;
+ if (us_info->tend)
+ gumr |= UCC_SLOW_GUMR_L_TEND;
+ gumr |= us_info->tdcr;
+ gumr |= us_info->rdcr;
+ gumr |= us_info->tenc;
+ gumr |= us_info->renc;
+ gumr |= us_info->diag;
+ gumr |= us_info->mode;
+ out_be32(&us_regs->gumr_l, gumr);
+
+ /* Function code registers */
+ /* function_code has initial value 0 */
+
+ /* if the data is in cachable memory, the 'global' */
+ /* in the function code should be set. */
+ function_code |= us_info->data_mem_part;
+ function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
+ uccs->us_pram->tfcr = function_code;
+ uccs->us_pram->rfcr = function_code;
+
+ /* rbase, tbase are offsets from MURAM base */
+ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+
+ /* Mux clocking */
+ /* Grant Support */
+ ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
+ /* Breakpoint Support */
+ ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
+ /* Set Tsa or NMSI mode. */
+ ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
+ /* If NMSI (not Tsa), set Tx and Rx clock. */
+ if (!us_info->tsa) {
+ /* Rx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter" \
+ " 'RxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ /* Tx clock routing */
+ if (ucc_set_qe_mux_rxtx
+ (us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) {
+ uccs_err
+ ("ucc_slow_init: Illegal value for parameter " \
+ "'TxClock'.");
+ ucc_slow_free(uccs);
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * INTERRUPTS
+ */
+ /* Set interrupt mask register at UCC level. */
+ out_be16(&us_regs->uccm, us_info->uccm_mask);
+
+ /* First, clear anything pending at UCC level, */
+ /* otherwise, old garbage may come through */
+ /* as soon as the dam is opened. */
+
+ /* Writing '1' clears */
+ out_be16(&us_regs->ucce, 0xffff);
+
+ /* Issue QE Init command */
+ if (us_info->init_tx && us_info->init_rx)
+ command = QE_INIT_TX_RX;
+ else if (us_info->init_tx)
+ command = QE_INIT_TX;
+ else
+ command = QE_INIT_RX; /* We know at least one is TRUE */
+ id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
+ qe_issue_cmd(command, id, (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ *uccs_ret = uccs;
+ return 0;
+}
+
+void ucc_slow_free(ucc_slow_private_t * uccs)
+{
+ if (!uccs)
+ return;
+
+ if (uccs->rx_base_offset)
+ qe_muram_free(uccs->rx_base_offset);
+
+ if (uccs->tx_base_offset)
+ qe_muram_free(uccs->tx_base_offset);
+
+ if (uccs->us_pram) {
+ qe_muram_free(uccs->us_pram_offset);
+ uccs->us_pram = NULL;
+ }
+
+ kfree(uccs);
+}
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
new file mode 100644
index 0000000..a38e28b
--- /dev/null
+++ b/include/asm-powerpc/ucc.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM 8
+
+/* Slow or fast type for UCCs.
+*/
+typedef enum ucc_speed_type {
+ UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
+} ucc_speed_type_e;
+
+/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
+*/
+typedef enum ucc_pram_initial_offset {
+ UCC_PRAM_OFFSET_UCC1 = 0x8400,
+ UCC_PRAM_OFFSET_UCC2 = 0x8500,
+ UCC_PRAM_OFFSET_UCC3 = 0x8600,
+ UCC_PRAM_OFFSET_UCC4 = 0x9000,
+ UCC_PRAM_OFFSET_UCC5 = 0x8000,
+ UCC_PRAM_OFFSET_UCC6 = 0x8100,
+ UCC_PRAM_OFFSET_UCC7 = 0x8200,
+ UCC_PRAM_OFFSET_UCC8 = 0x8300
+} ucc_pram_initial_offset_e;
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * regs - (In) pointer to registers base for the UCC.
+ * speed - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(int ucc_num, struct ucc_common *regs,
+ enum ucc_speed_type speed);
+
+/* ucc_init_guemr
+ * Init the Guemr register.
+ *
+ * regs - (In) pointer to registers base for the UCC.
+ */
+int ucc_init_guemr(struct ucc_common *regs);
+
+int ucc_set_qe_mux_mii_mng(int ucc_num);
+
+int ucc_set_qe_mux_rxtx(int ucc_num, qe_clock_e clock, comm_dir_e mode);
+
+int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(int ucc_num, int set)
+{
+ return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif /* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
new file mode 100644
index 0000000..a88b97c
--- /dev/null
+++ b/include/asm-powerpc/ucc_fast.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Changelog:
+ * Jun 28, 2006 Li Yang <LeoLi@freescale.com>
+ * - Reorganized as qe_lib
+ * - Merged to powerpc arch; add device tree support
+ * - Style fixes
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status.
+*/
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_F 0x04000000 /* first */
+
+/* transmit BD's status.
+*/
+#define T_R 0x80000000 /* ready bit */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes
+*/
+#define UCC_FAST_URFS_MIN_VAL 0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode.
+*/
+typedef enum ucc_fast_channel_protocol_mode {
+ UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+ UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+ UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+ UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+ UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+ UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+ UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+ UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+ UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+ UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+ UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+ UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+} ucc_fast_channel_protocol_mode_e;
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX
+*/
+typedef enum ucc_fast_transparent_txrx {
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+ UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+} ucc_fast_transparent_txrx_e;
+
+/* UCC fast diagnostic mode
+*/
+typedef enum ucc_fast_diag_mode {
+ UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+ UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+ UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+ UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+} ucc_fast_diag_mode_e;
+
+/* UCC fast Sync length (transparent mode only)
+*/
+typedef enum ucc_fast_sync_len {
+ UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+ UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+ UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+ UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+} ucc_fast_sync_len_e;
+
+/* UCC fast RTS mode
+*/
+typedef enum ucc_fast_ready_to_send {
+ UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+ UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+} ucc_fast_ready_to_send_e;
+
+/* UCC fast receiver decoding mode
+*/
+typedef enum ucc_fast_rx_decoding_method {
+ UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+ UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+ UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+} ucc_fast_rx_decoding_method_e;
+
+/* UCC fast transmitter encoding mode
+*/
+typedef enum ucc_fast_tx_encoding_method {
+ UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+ UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+ UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+ UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+} ucc_fast_tx_encoding_method_e;
+
+/* UCC fast CRC length
+*/
+typedef enum ucc_fast_transparent_tcrc {
+ UCC_FAST_16_BIT_CRC = 0x00000000,
+ UCC_FAST_CRC_RESERVED0 = 0x00000040,
+ UCC_FAST_32_BIT_CRC = 0x00000080,
+ UCC_FAST_CRC_RESERVED1 = 0x000000C0
+} ucc_fast_transparent_tcrc_e;
+
+/* Fast UCC initialization structure.
+*/
+typedef struct ucc_fast_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ u32 regs;
+ int irq;
+ u32 uccm_mask;
+ int bd_mem_part;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int tci;
+ int txsy;
+ int rtsm;
+ int revd;
+ int rsyn;
+ u16 max_rx_buf_length;
+ u16 urfs;
+ u16 urfet;
+ u16 urfset;
+ u16 utfs;
+ u16 utfet;
+ u16 utftt;
+ u16 ufpt;
+ ucc_fast_channel_protocol_mode_e mode;
+ ucc_fast_transparent_txrx_e ttx_trx;
+ ucc_fast_tx_encoding_method_e tenc;
+ ucc_fast_rx_decoding_method_e renc;
+ ucc_fast_transparent_tcrc_e tcrc;
+ ucc_fast_sync_len_e synl;
+} ucc_fast_info_t;
+
+typedef struct ucc_fast_private {
+ ucc_fast_info_t *uf_info;
+ ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs. */
+ u32 *p_ucce; /* a pointer to the event register in memory. */
+ u32 *p_uccm; /* a pointer to the mask register in memory. */
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ virtual fifo */
+ u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ virtual fifo */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counter. */
+ u32 rx_frames; /* Received frames counter (only frames
+ passed to application). */
+ u32 tx_discarded; /* Discarded tx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+ u32 rx_discarded; /* Discarded rx frames counter (frames that
+ were discarded by the driver due to errors).
+ */
+#endif /* STATISTICS */
+ u16 mrblr; /* maximum receive buffer length */
+} ucc_fast_private_t;
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(ucc_fast_info_t * uf_info, ucc_fast_private_t ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(ucc_fast_private_t * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(ucc_fast_private_t * uccf, comm_dir_e mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(ucc_fast_private_t * uccf, comm_dir_e mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(ucc_fast_private_t * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(ucc_fast_private_t * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(ucc_fast_private_t * uccf);
+
+#endif /* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
new file mode 100644
index 0000000..c5002e2
--- /dev/null
+++ b/include/asm-powerpc/ucc_slow.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+#define UCC_SLOW_SIZE_OF_BD QE_SIZEOF_BD
+
+/* transmit BD's status.
+*/
+#define T_R 0x80000000 /* ready bit */
+#define T_PAD 0x40000000 /* add pads to short frames */
+#define T_W 0x20000000 /* wrap bit */
+#define T_I 0x10000000 /* interrupt on completion */
+#define T_L 0x08000000 /* last */
+
+#define T_A 0x04000000 /* Address - the data transmitted as address
+ chars */
+#define T_TC 0x04000000 /* transmit CRC */
+#define T_CM 0x02000000 /* continuous mode */
+#define T_DEF 0x02000000 /* collision on previous attempt to transmit. */
+#define T_P 0x01000000 /* Preamble - send Preamble sequence before
+ data */
+#define T_HB 0x01000000 /* heartbeat. */
+#define T_NS 0x00800000 /* No Stop */
+#define T_LC 0x00800000 /* late collision. */
+#define T_RL 0x00400000 /* retransmission limit. */
+#define T_UN 0x00020000 /* underrun */
+#define T_CT 0x00010000 /* CTS lost */
+#define T_CSL 0x00010000 /* carrier sense lost. */
+#define T_RC 0x003c0000 /* retry count. */
+
+/* Receive BD's status.
+*/
+#define R_E 0x80000000 /* buffer empty */
+#define R_W 0x20000000 /* wrap bit */
+#define R_I 0x10000000 /* interrupt on reception */
+#define R_L 0x08000000 /* last */
+#define R_C 0x08000000 /* the last byte in this buffer is a cntl
+ char */
+#define R_F 0x04000000 /* first */
+#define R_A 0x04000000 /* the first byte in this buffer is address
+ byte */
+#define R_CM 0x02000000 /* continuous mode */
+#define R_ID 0x01000000 /* buffer close on reception of idles */
+#define R_M 0x01000000 /* Frame received because of promiscuous
+ mode. */
+#define R_AM 0x00800000 /* Address match */
+#define R_DE 0x00800000 /* Address match */
+#define R_LG 0x00200000 /* Break received */
+#define R_BR 0x00200000 /* Frame length violation */
+#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */
+#define R_FR 0x00100000 /* Framing Error (no stop bit) character
+ received */
+#define R_PR 0x00080000 /* Parity Error character received */
+#define R_AB 0x00080000 /* Frame Aborted */
+#define R_SH 0x00080000 /* frame is too short. */
+#define R_CR 0x00040000 /* CRC Error */
+#define R_OV 0x00020000 /* Overrun */
+#define R_CD 0x00010000 /* CD lost */
+#define R_CL 0x00010000 /* this frame is closed because of a
+ collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN 4
+#define UCC_SLOW_MRBLR_ALIGNMENT 4
+#define UCC_SLOW_PRAM_SIZE 0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM 64
+
+/* UCC Slow Channel Protocol Mode
+*/
+typedef enum ucc_slow_channel_protocol_mode {
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, /* QMC */
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, /* UART */
+ UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008 /* BISYNC */
+} ucc_slow_channel_protocol_mode_e;
+
+/* UCC Slow Transparent Transmit CRC (TCRC)
+*/
+typedef enum ucc_slow_transparent_tcrc {
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, /* 16-bit
+ CCITT CRC
+ (HDLC).
+ (X16 + X12
+ + X5 + 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, /* CRC16 (BISYNC).
+ (X16 + X15 + X2 +
+ 1) */
+ UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000 /* 32-bit
+ CCITT CRC
+ (Ethernet
+ and HDLC).
+ */
+} ucc_slow_transparent_tcrc_e;
+
+/* UCC Slow oversampling rate for transmitter (TDCR)
+*/
+typedef enum ucc_slow_tx_oversampling_rate {
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, /* 1x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, /* 8x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, /* 16x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000 /* 32x clock
+ mode */
+} ucc_slow_tx_oversampling_rate_e;
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+typedef enum ucc_slow_rx_oversampling_rate {
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, /* 1x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, /* 8x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, /* 16x clock
+ mode */
+ UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000 /* 32x clock
+ mode */
+} ucc_slow_rx_oversampling_rate_e;
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+typedef enum ucc_slow_tx_encoding_method {
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+ UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+} ucc_slow_tx_encoding_method_e;
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+typedef enum ucc_slow_rx_decoding_method {
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+ UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+} ucc_slow_rx_decoding_method_e;
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+typedef enum ucc_slow_diag_mode {
+ UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+ UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+ UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+ UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+} ucc_slow_diag_mode_e;
+
+typedef struct ucc_slow_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ ucc_slow_t *us_regs;
+ int irq;
+ u16 uccm_mask;
+ int data_mem_part;
+ int init_tx;
+ int init_rx;
+ u32 tx_bd_ring_len;
+ u32 rx_bd_ring_len;
+ int rx_interrupts;
+ int brkpt_support;
+ int grant_support;
+ int tsa;
+ int cdp;
+ int cds;
+ int ctsp;
+ int ctss;
+ int rinv;
+ int tinv;
+ int rtsm;
+ int rfw;
+ int tci;
+ int tend;
+ int tfl;
+ int txsy;
+ u16 max_rx_buf_length;
+ ucc_slow_transparent_tcrc_e tcrc;
+ ucc_slow_channel_protocol_mode_e mode;
+ ucc_slow_diag_mode_e diag;
+ ucc_slow_tx_oversampling_rate_e tdcr;
+ ucc_slow_rx_oversampling_rate_e rdcr;
+ ucc_slow_tx_encoding_method_e tenc;
+ ucc_slow_rx_decoding_method_e renc;
+} ucc_slow_info_t;
+
+typedef struct ucc_slow_private {
+ ucc_slow_info_t *us_info;
+ ucc_slow_t *us_regs; /* a pointer to memory map of UCC regs. */
+ ucc_slow_pram_t *us_pram; /* a pointer to the parameter RAM. */
+ uint us_pram_offset;
+ int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
+ int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
+ int stopped_tx; /* Whether channel has been stopped for Tx
+ (STOP_TX, etc.) */
+ int stopped_rx; /* Whether channel has been stopped for Rx */
+ struct list_head confQ; /* frames passed to chip waiting for tx */
+ u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
+ and length for first BD in a frame. */
+ uint tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ uint rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ u8 *confBd; /* next BD for confirm after Tx */
+ u8 *tx_bd; /* next BD for new Tx request */
+ u8 *rx_bd; /* next BD to collect after Rx */
+ void *p_rx_frame; /* accumulating receive frame */
+ u16 *p_ucce; /* a pointer to the event register in memory.
+ */
+ u16 *p_uccm; /* a pointer to the mask register in memory.
+ */
+ u16 saved_uccm; /* a saved mask for the RX Interrupt bits. */
+#ifdef STATISTICS
+ u32 tx_frames; /* Transmitted frames counters. */
+ u32 rx_frames; /* Received frames counters (only frames
+ passed to application). */
+ u32 rx_discarded; /* Discarded frames counters (frames that
+ were discarded by the driver due to
+ errors). */
+#endif /* STATISTICS */
+} ucc_slow_private_t;
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(ucc_slow_info_t * us_info, ucc_slow_private_t ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(ucc_slow_private_t * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(ucc_slow_private_t * uccs, comm_dir_e mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(ucc_slow_private_t * uccs, comm_dir_e mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(ucc_slow_private_t * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(ucc_slow_private_t * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(ucc_slow_private_t * uccs);
+
+/* ucc_slow_restart_x
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_x(ucc_slow_private_t * uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif /* __UCC_SLOW_H__ */
^ permalink raw reply related
* [PATCH 6/11] qe_lib: Add QE memory map definition
From: Li Yang @ 2006-09-21 12:19 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
include/asm-powerpc/immap_qe.h | 504 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 504 insertions(+), 0 deletions(-)
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
new file mode 100644
index 0000000..43ea7bb
--- /dev/null
+++ b/include/asm-powerpc/immap_qe.h
@@ -0,0 +1,504 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Shlomi Gridish <gridish@freescale.com>
+ * Maintainer: Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_QE_H__
+#define __IMMAP_QE_H__
+
+#include <linux/kernel.h>
+
+#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */
+
+/* QE I-RAM
+*/
+typedef struct qe_iram {
+ u32 iadd; /* I-RAM Address Register */
+ u32 idata; /* I-RAM Data Register */
+ u8 res0[0x78];
+} __attribute__ ((packed)) qe_iram_t;
+
+/* QE Interrupt Controller
+*/
+typedef struct qe_ic_regs {
+ u32 qicr;
+ u32 qivec;
+ u32 qripnr;
+ u32 qipnr;
+ u32 qipxcc;
+ u32 qipycc;
+ u32 qipwcc;
+ u32 qipzcc;
+ u32 qimr;
+ u32 qrimr;
+ u32 qicnr;
+ u8 res0[0x4];
+ u32 qiprta;
+ u32 qiprtb;
+ u8 res1[0x4];
+ u32 qricr;
+ u8 res2[0x20];
+ u32 qhivec;
+ u8 res3[0x1C];
+} __attribute__ ((packed)) qe_ic_t;
+
+/* Communications Processor
+*/
+typedef struct cp_qe {
+ u32 cecr; /* QE command register */
+ u32 ceccr; /* QE controller configuration register */
+ u32 cecdr; /* QE command data register */
+ u8 res0[0xA];
+ u16 ceter; /* QE timer event register */
+ u8 res1[0x2];
+ u16 cetmr; /* QE timers mask register */
+ u32 cetscr; /* QE time-stamp timer control register */
+ u32 cetsr1; /* QE time-stamp register 1 */
+ u32 cetsr2; /* QE time-stamp register 2 */
+ u8 res2[0x8];
+ u32 cevter; /* QE virtual tasks event register */
+ u32 cevtmr; /* QE virtual tasks mask register */
+ u16 cercr; /* QE RAM control register */
+ u8 res3[0x2];
+ u8 res4[0x24];
+ u16 ceexe1; /* QE external request 1 event register */
+ u8 res5[0x2];
+ u16 ceexm1; /* QE external request 1 mask register */
+ u8 res6[0x2];
+ u16 ceexe2; /* QE external request 2 event register */
+ u8 res7[0x2];
+ u16 ceexm2; /* QE external request 2 mask register */
+ u8 res8[0x2];
+ u16 ceexe3; /* QE external request 3 event register */
+ u8 res9[0x2];
+ u16 ceexm3; /* QE external request 3 mask register */
+ u8 res10[0x2];
+ u16 ceexe4; /* QE external request 4 event register */
+ u8 res11[0x2];
+ u16 ceexm4; /* QE external request 4 mask register */
+ u8 res12[0x2];
+ u8 res13[0x280];
+} __attribute__ ((packed)) cp_qe_t;
+
+/* QE Multiplexer
+*/
+typedef struct qe_mux {
+ u32 cmxgcr; /* CMX general clock route register */
+ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */
+ u32 cmxsi1cr_h; /* CMX SI1 clock route high register */
+ u32 cmxsi1syr; /* CMX SI1 SYNC route register */
+ u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */
+ u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */
+ u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */
+ u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */
+ u32 cmxupcr; /* CMX UPC clock route register */
+ u8 res0[0x1C];
+} __attribute__ ((packed)) qe_mux_t;
+
+/* QE Timers
+*/
+typedef struct qe_timers {
+ u8 gtcfr1; /* Timer 1 and Timer 2 global configuration
+ register */
+ u8 res0[0x3];
+ u8 gtcfr2; /* Timer 3 and timer 4 global configuration
+ register */
+ u8 res1[0xB];
+ u16 gtmdr1; /* Timer 1 mode register */
+ u16 gtmdr2; /* Timer 2 mode register */
+ u16 gtrfr1; /* Timer 1 reference register */
+ u16 gtrfr2; /* Timer 2 reference register */
+ u16 gtcpr1; /* Timer 1 capture register */
+ u16 gtcpr2; /* Timer 2 capture register */
+ u16 gtcnr1; /* Timer 1 counter */
+ u16 gtcnr2; /* Timer 2 counter */
+ u16 gtmdr3; /* Timer 3 mode register */
+ u16 gtmdr4; /* Timer 4 mode register */
+ u16 gtrfr3; /* Timer 3 reference register */
+ u16 gtrfr4; /* Timer 4 reference register */
+ u16 gtcpr3; /* Timer 3 capture register */
+ u16 gtcpr4; /* Timer 4 capture register */
+ u16 gtcnr3; /* Timer 3 counter */
+ u16 gtcnr4; /* Timer 4 counter */
+ u16 gtevr1; /* Timer 1 event register */
+ u16 gtevr2; /* Timer 2 event register */
+ u16 gtevr3; /* Timer 3 event register */
+ u16 gtevr4; /* Timer 4 event register */
+ u16 gtps; /* Timer 1 prescale register */
+ u8 res2[0x46];
+} __attribute__ ((packed)) qe_timers_t;
+
+/* BRG
+*/
+typedef struct qe_brg {
+ u32 brgc1; /* BRG1 configuration register */
+ u32 brgc2; /* BRG2 configuration register */
+ u32 brgc3; /* BRG3 configuration register */
+ u32 brgc4; /* BRG4 configuration register */
+ u32 brgc5; /* BRG5 configuration register */
+ u32 brgc6; /* BRG6 configuration register */
+ u32 brgc7; /* BRG7 configuration register */
+ u32 brgc8; /* BRG8 configuration register */
+ u32 brgc9; /* BRG9 configuration register */
+ u32 brgc10; /* BRG10 configuration register */
+ u32 brgc11; /* BRG11 configuration register */
+ u32 brgc12; /* BRG12 configuration register */
+ u32 brgc13; /* BRG13 configuration register */
+ u32 brgc14; /* BRG14 configuration register */
+ u32 brgc15; /* BRG15 configuration register */
+ u32 brgc16; /* BRG16 configuration register */
+ u8 res0[0x40];
+} __attribute__ ((packed)) qe_brg_t;
+
+/* SPI
+*/
+typedef struct spi {
+ u8 res0[0x20];
+ u32 spmode; /* SPI mode register */
+ u8 res1[0x2];
+ u8 spie; /* SPI event register */
+ u8 res2[0x1];
+ u8 res3[0x2];
+ u8 spim; /* SPI mask register */
+ u8 res4[0x1];
+ u8 res5[0x1];
+ u8 spcom; /* SPI command register */
+ u8 res6[0x2];
+ u32 spitd; /* SPI transmit data register (cpu mode) */
+ u32 spird; /* SPI receive data register (cpu mode) */
+ u8 res7[0x8];
+} __attribute__ ((packed)) spi_t;
+
+/* SI
+*/
+typedef struct si1 {
+ u16 siamr1; /* SI1 TDMA mode register */
+ u16 sibmr1; /* SI1 TDMB mode register */
+ u16 sicmr1; /* SI1 TDMC mode register */
+ u16 sidmr1; /* SI1 TDMD mode register */
+ u8 siglmr1_h; /* SI1 global mode register high */
+ u8 res0[0x1];
+ u8 sicmdr1_h; /* SI1 command register high */
+ u8 res2[0x1];
+ u8 sistr1_h; /* SI1 status register high */
+ u8 res3[0x1];
+ u16 sirsr1_h; /* SI1 RAM shadow address register high */
+ u8 sitarc1; /* SI1 RAM counter Tx TDMA */
+ u8 sitbrc1; /* SI1 RAM counter Tx TDMB */
+ u8 sitcrc1; /* SI1 RAM counter Tx TDMC */
+ u8 sitdrc1; /* SI1 RAM counter Tx TDMD */
+ u8 sirarc1; /* SI1 RAM counter Rx TDMA */
+ u8 sirbrc1; /* SI1 RAM counter Rx TDMB */
+ u8 sircrc1; /* SI1 RAM counter Rx TDMC */
+ u8 sirdrc1; /* SI1 RAM counter Rx TDMD */
+ u8 res4[0x8];
+ u16 siemr1; /* SI1 TDME mode register 16 bits */
+ u16 sifmr1; /* SI1 TDMF mode register 16 bits */
+ u16 sigmr1; /* SI1 TDMG mode register 16 bits */
+ u16 sihmr1; /* SI1 TDMH mode register 16 bits */
+ u8 siglmg1_l; /* SI1 global mode register low 8 bits */
+ u8 res5[0x1];
+ u8 sicmdr1_l; /* SI1 command register low 8 bits */
+ u8 res6[0x1];
+ u8 sistr1_l; /* SI1 status register low 8 bits */
+ u8 res7[0x1];
+ u16 sirsr1_l; /* SI1 RAM shadow address register low 16
+ bits */
+ u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */
+ u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */
+ u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */
+ u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */
+ u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */
+ u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */
+ u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */
+ u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */
+ u8 res8[0x8];
+ u32 siml1; /* SI1 multiframe limit register */
+ u8 siedm1; /* SI1 extended diagnostic mode register */
+ u8 res9[0xBB];
+} __attribute__ ((packed)) si1_t;
+
+/* SI Routing Tables
+*/
+typedef struct sir {
+ u8 tx[0x400];
+ u8 rx[0x400];
+ u8 res0[0x800];
+} __attribute__ ((packed)) sir_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ u16 usb_usep1;
+ u16 usb_usep2;
+ u16 usb_usep3;
+ u16 usb_usep4;
+ u8 res2[4];
+ u16 usb_usber;
+ u8 res3[2];
+ u16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ u16 usb_ussft;
+ u8 res5[2];
+ u16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed)) usb_t;
+
+/* MCC
+*/
+typedef struct mcc {
+ u32 mcce; /* MCC event register */
+ u32 mccm; /* MCC mask register */
+ u32 mccf; /* MCC configuration register */
+ u32 merl; /* MCC emergency request level register */
+ u8 res0[0xF0];
+} __attribute__ ((packed)) mcc_t;
+
+/* QE UCC Slow
+*/
+typedef struct ucc_slow {
+ u32 gumr_l; /* UCCx general mode register (low) */
+ u32 gumr_h; /* UCCx general mode register (high) */
+ u16 upsmr; /* UCCx protocol-specific mode register */
+ u8 res0[0x2];
+ u16 utodr; /* UCCx transmit on demand register */
+ u16 udsr; /* UCCx data synchronization register */
+ u16 ucce; /* UCCx event register */
+ u8 res1[0x2];
+ u16 uccm; /* UCCx mask register */
+ u8 res2[0x1];
+ u8 uccs; /* UCCx status register */
+ u8 res3[0x24];
+ u16 utpt;
+ u8 guemr; /* UCC general extended mode register */
+ u8 res4[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_slow_t;
+
+/* QE UCC Fast
+*/
+typedef struct ucc_fast {
+ u32 gumr; /* UCCx general mode register */
+ u32 upsmr; /* UCCx protocol-specific mode register */
+ u16 utodr; /* UCCx transmit on demand register */
+ u8 res0[0x2];
+ u16 udsr; /* UCCx data synchronization register */
+ u8 res1[0x2];
+ u32 ucce; /* UCCx event register */
+ u32 uccm; /* UCCx mask register. */
+ u8 uccs; /* UCCx status register */
+ u8 res2[0x7];
+ u32 urfb; /* UCC receive FIFO base */
+ u16 urfs; /* UCC receive FIFO size */
+ u8 res3[0x2];
+ u16 urfet; /* UCC receive FIFO emergency threshold */
+ u16 urfset; /* UCC receive FIFO special emergency
+ threshold */
+ u32 utfb; /* UCC transmit FIFO base */
+ u16 utfs; /* UCC transmit FIFO size */
+ u8 res4[0x2];
+ u16 utfet; /* UCC transmit FIFO emergency threshold */
+ u8 res5[0x2];
+ u16 utftt; /* UCC transmit FIFO transmit threshold */
+ u8 res6[0x2];
+ u16 utpt; /* UCC transmit polling timer */
+ u8 res7[0x2];
+ u32 urtry; /* UCC retry counter register */
+ u8 res8[0x4C];
+ u8 guemr; /* UCC general extended mode register */
+ u8 res9[0x100 - 0x091];
+} __attribute__ ((packed)) ucc_fast_t;
+
+/* QE UCC
+*/
+typedef struct ucc_common {
+ u8 res1[0x90];
+ u8 guemr;
+ u8 res2[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_common_t;
+
+typedef struct ucc {
+ union {
+ ucc_slow_t slow;
+ ucc_fast_t fast;
+ ucc_common_t common;
+ };
+} __attribute__ ((packed)) ucc_t;
+
+/* MultiPHY UTOPIA POS Controllers (UPC)
+*/
+typedef struct upc {
+ u32 upgcr; /* UTOPIA/POS general configuration register */
+ u32 uplpa; /* UTOPIA/POS last PHY address */
+ u32 uphec; /* ATM HEC register */
+ u32 upuc; /* UTOPIA/POS UCC configuration */
+ u32 updc1; /* UTOPIA/POS device 1 configuration */
+ u32 updc2; /* UTOPIA/POS device 2 configuration */
+ u32 updc3; /* UTOPIA/POS device 3 configuration */
+ u32 updc4; /* UTOPIA/POS device 4 configuration */
+ u32 upstpa; /* UTOPIA/POS STPA threshold */
+ u8 res0[0xC];
+ u32 updrs1_h; /* UTOPIA/POS device 1 rate select */
+ u32 updrs1_l; /* UTOPIA/POS device 1 rate select */
+ u32 updrs2_h; /* UTOPIA/POS device 2 rate select */
+ u32 updrs2_l; /* UTOPIA/POS device 2 rate select */
+ u32 updrs3_h; /* UTOPIA/POS device 3 rate select */
+ u32 updrs3_l; /* UTOPIA/POS device 3 rate select */
+ u32 updrs4_h; /* UTOPIA/POS device 4 rate select */
+ u32 updrs4_l; /* UTOPIA/POS device 4 rate select */
+ u32 updrp1; /* UTOPIA/POS device 1 receive priority low */
+ u32 updrp2; /* UTOPIA/POS device 2 receive priority low */
+ u32 updrp3; /* UTOPIA/POS device 3 receive priority low */
+ u32 updrp4; /* UTOPIA/POS device 4 receive priority low */
+ u32 upde1; /* UTOPIA/POS device 1 event */
+ u32 upde2; /* UTOPIA/POS device 2 event */
+ u32 upde3; /* UTOPIA/POS device 3 event */
+ u32 upde4; /* UTOPIA/POS device 4 event */
+ u16 uprp1;
+ u16 uprp2;
+ u16 uprp3;
+ u16 uprp4;
+ u8 res1[0x8];
+ u16 uptirr1_0; /* Device 1 transmit internal rate 0 */
+ u16 uptirr1_1; /* Device 1 transmit internal rate 1 */
+ u16 uptirr1_2; /* Device 1 transmit internal rate 2 */
+ u16 uptirr1_3; /* Device 1 transmit internal rate 3 */
+ u16 uptirr2_0; /* Device 2 transmit internal rate 0 */
+ u16 uptirr2_1; /* Device 2 transmit internal rate 1 */
+ u16 uptirr2_2; /* Device 2 transmit internal rate 2 */
+ u16 uptirr2_3; /* Device 2 transmit internal rate 3 */
+ u16 uptirr3_0; /* Device 3 transmit internal rate 0 */
+ u16 uptirr3_1; /* Device 3 transmit internal rate 1 */
+ u16 uptirr3_2; /* Device 3 transmit internal rate 2 */
+ u16 uptirr3_3; /* Device 3 transmit internal rate 3 */
+ u16 uptirr4_0; /* Device 4 transmit internal rate 0 */
+ u16 uptirr4_1; /* Device 4 transmit internal rate 1 */
+ u16 uptirr4_2; /* Device 4 transmit internal rate 2 */
+ u16 uptirr4_3; /* Device 4 transmit internal rate 3 */
+ u32 uper1; /* Device 1 port enable register */
+ u32 uper2; /* Device 2 port enable register */
+ u32 uper3; /* Device 3 port enable register */
+ u32 uper4; /* Device 4 port enable register */
+ u8 res2[0x150];
+} __attribute__ ((packed)) upc_t;
+
+/* SDMA
+*/
+typedef struct sdma {
+ u32 sdsr; /* Serial DMA status register */
+ u32 sdmr; /* Serial DMA mode register */
+ u32 sdtr1; /* SDMA system bus threshold register */
+ u32 sdtr2; /* SDMA secondary bus threshold register */
+ u32 sdhy1; /* SDMA system bus hysteresis register */
+ u32 sdhy2; /* SDMA secondary bus hysteresis register */
+ u32 sdta1; /* SDMA system bus address register */
+ u32 sdta2; /* SDMA secondary bus address register */
+ u32 sdtm1; /* SDMA system bus MSNUM register */
+ u32 sdtm2; /* SDMA secondary bus MSNUM register */
+ u8 res0[0x10];
+ u32 sdaqr; /* SDMA address bus qualify register */
+ u32 sdaqmr; /* SDMA address bus qualify mask register */
+ u8 res1[0x4];
+ u32 sdebcr; /* SDMA CAM entries base register */
+ u8 res2[0x38];
+} __attribute__ ((packed)) sdma_t;
+
+/* Debug Space
+*/
+typedef struct dbg {
+ u32 bpdcr; /* Breakpoint debug command register */
+ u32 bpdsr; /* Breakpoint debug status register */
+ u32 bpdmr; /* Breakpoint debug mask register */
+ u32 bprmrr0; /* Breakpoint request mode risc register 0 */
+ u32 bprmrr1; /* Breakpoint request mode risc register 1 */
+ u8 res0[0x8];
+ u32 bprmtr0; /* Breakpoint request mode trb register 0 */
+ u32 bprmtr1; /* Breakpoint request mode trb register 1 */
+ u8 res1[0x8];
+ u32 bprmir; /* Breakpoint request mode immediate register */
+ u32 bprmsr; /* Breakpoint request mode serial register */
+ u32 bpemr; /* Breakpoint exit mode register */
+ u8 res2[0x48];
+} __attribute__ ((packed)) dbg_t;
+
+/* RISC Special Registers (Trap and Breakpoint)
+*/
+typedef struct rsp {
+ u8 fixme[0x100];
+} __attribute__ ((packed)) rsp_t;
+
+typedef struct qe_immap {
+ qe_iram_t iram; /* I-RAM */
+ qe_ic_t ic; /* Interrupt Controller */
+ cp_qe_t cp; /* Communications Processor */
+ qe_mux_t qmx; /* QE Multiplexer */
+ qe_timers_t qet; /* QE Timers */
+ spi_t spi[0x2]; /* spi */
+ mcc_t mcc; /* mcc */
+ qe_brg_t brg; /* brg */
+ usb_t usb; /* USB */
+ si1_t si1; /* SI */
+ u8 res11[0x800];
+ sir_t sir; /* SI Routing Tables */
+ ucc_t ucc1; /* ucc1 */
+ ucc_t ucc3; /* ucc3 */
+ ucc_t ucc5; /* ucc5 */
+ ucc_t ucc7; /* ucc7 */
+ u8 res12[0x600];
+ upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */
+ ucc_t ucc2; /* ucc2 */
+ ucc_t ucc4; /* ucc4 */
+ ucc_t ucc6; /* ucc6 */
+ ucc_t ucc8; /* ucc8 */
+ u8 res13[0x600];
+ upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */
+ sdma_t sdma; /* SDMA */
+ dbg_t dbg; /* Debug Space */
+ rsp_t rsp[0x2]; /* RISC Special Registers (Trap and Breakpoint)
+ */
+ u8 res14[0x300];
+ u8 res15[0x3A00];
+ u8 res16[0x8000]; /* 0x108000 - 0x110000 */
+ u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */
+ u8 res17[0x24000]; /* 0x11C000 - 0x140000 */
+ u8 res18[0xC0000]; /* 0x140000 - 0x200000 */
+} __attribute__ ((packed)) qe_map_t;
+
+extern qe_map_t *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(volatile void * address)
+{
+ if ( ((uint)address >= (uint)qe_immr) &&
+ ((uint)address < ((uint)qe_immr + QE_IMMAP_SIZE)) )
+ return (unsigned long)(address - (uint)qe_immr +
+ (uint)get_qe_base());
+ return (unsigned long)virt_to_phys(address);
+}
+
+static inline void * immrbar_phys_to_virt(unsigned long address)
+{
+ if ( (address >= (uint)get_qe_base()) &&
+ (address < ((uint)get_qe_base() + QE_IMMAP_SIZE)) )
+ return (void *)(address - (uint)get_qe_base() + (uint)qe_immr);
+ return (void *)phys_to_virt(address);
+}
+
+#endif /* __IMMAP_QE_H__ */
+#endif /* __KERNEL__ */
^ permalink raw reply related
* [PATCH 7/11] qe_lib: Add QE SoC support
From: Li Yang @ 2006-09-21 12:19 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/sysdev/qe_lib/qe.c | 176 +++++++++++++++++++++++++++++++++++++++
1 files changed, 176 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
new file mode 100644
index 0000000..df3e826
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *
+ * Description:
+ * FSL QE SOC setup.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+#include <mm/mmu_decl.h>
+
+static phys_addr_t qebase = -1;
+
+phys_addr_t get_qe_base(void)
+{
+ struct device_node *qe;
+
+ if (qebase != -1)
+ return qebase;
+
+ qe = of_find_node_by_type(NULL, "qe");
+ if (qe) {
+ unsigned int size;
+ void *prop = get_property(qe, "reg", &size);
+ qebase = of_translate_address(qe, prop);
+ of_node_put(qe);
+ };
+
+ return qebase;
+}
+
+EXPORT_SYMBOL(get_qe_base);
+
+static int __init ucc_geth_of_init(void)
+{
+ struct device_node *np;
+ unsigned int i, ucc_num;
+ struct platform_device *ugeth_dev;
+ struct resource res;
+ int ret;
+
+ for (np = NULL, i = 0;
+ (np = of_find_compatible_node(np, "network", "ucc_geth")) != NULL;
+ i++) {
+ struct resource r[2];
+ struct device_node *phy, *mdio;
+ struct ucc_geth_platform_data ugeth_data;
+ unsigned int *id;
+ char *model;
+ void *mac_addr;
+ phandle *ph;
+
+ memset(r, 0, sizeof(r));
+ memset(&ugeth_data, 0, sizeof(ugeth_data));
+
+ ret = of_address_to_resource(np, 0, &r[0]);
+ if (ret)
+ goto err;
+
+ ugeth_data.phy_reg_addr = r[0].start;
+ r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
+ r[1].flags = IORESOURCE_IRQ;
+
+ model = get_property(np, "model", NULL);
+ ucc_num = *((u32 *) get_property(np, "device-id", NULL));
+ if ((strstr(model, "UCC") == NULL) ||
+ (ucc_num < 1) || (ucc_num > 8)) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ugeth_dev =
+ platform_device_register_simple("ucc_geth", ucc_num - 1,
+ &r[0], 2);
+
+ if (IS_ERR(ugeth_dev)) {
+ ret = PTR_ERR(ugeth_dev);
+ goto err;
+ }
+
+ mac_addr = get_property(np, "mac-address", NULL);
+
+ memcpy(ugeth_data.mac_addr, mac_addr, 6);
+
+ ugeth_data.rx_clock = *((u32 *) get_property(np, "rx-clock",
+ NULL));
+ ugeth_data.tx_clock = *((u32 *) get_property(np, "tx-clock",
+ NULL));
+
+ ph = (phandle *) get_property(np, "phy-handle", NULL);
+ phy = of_find_node_by_phandle(*ph);
+
+ if (phy == NULL) {
+ ret = -ENODEV;
+ goto unreg;
+ }
+
+ mdio = of_get_parent(phy);
+
+ id = (u32 *) get_property(phy, "reg", NULL);
+ ret = of_address_to_resource(mdio, 0, &res);
+ if (ret) {
+ of_node_put(phy);
+ of_node_put(mdio);
+ goto unreg;
+ }
+
+ ugeth_data.phy_id = *id;
+
+ ugeth_data.phy_interrupt = irq_of_parse_and_map(phy, 0);;
+ ugeth_data.phy_interface = *((u32 *) get_property(phy,
+ "interface", NULL));
+
+ /* FIXME: Work around for early chip rev. */
+ /* There's a bug in initial chip rev(s) in the RGMII ac */
+ /* timing. */
+ /* The following compensates by writing to the reserved */
+ /* QE Port Output Hold Registers (CPOH1?). */
+ if ((ugeth_data.phy_interface == ENET_1000_RGMII) ||
+ (ugeth_data.phy_interface == ENET_100_RGMII) ||
+ (ugeth_data.phy_interface == ENET_10_RGMII)) {
+ u32 *tmp_reg = (u32 *) ioremap(get_immrbase()
+ + 0x14A8, 0x4);
+ u32 tmp_val = in_be32(tmp_reg);
+ if (ucc_num == 1)
+ out_be32(tmp_reg, tmp_val | 0x00003000);
+ else if (ucc_num == 2)
+ out_be32(tmp_reg, tmp_val | 0x0c000000);
+ iounmap(tmp_reg);
+ }
+
+ if (ugeth_data.phy_interrupt != 0)
+ ugeth_data.board_flags |= FSL_UGETH_BRD_HAS_PHY_INTR;
+
+ of_node_put(phy);
+ of_node_put(mdio);
+
+ ret = platform_device_add_data(ugeth_dev, &ugeth_data,
+ sizeof(struct ucc_geth_platform_data));
+ if (ret)
+ goto unreg;
+ }
+
+ return 0;
+
+unreg:
+ platform_device_unregister(ugeth_dev);
+err:
+ return ret;
+}
+
+arch_initcall(ucc_geth_of_init);
^ permalink raw reply related
* [PATCH 8/11] qe_lib: Fix rheap alignment problem
From: Li Yang @ 2006-09-21 12:19 UTC (permalink / raw)
To: linuxppc-dev
Honor alignment parameter in the rheap allocator. This is
needed by qe_lib.
Remove compile warning.
Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
arch/powerpc/lib/Makefile | 1 +
arch/powerpc/lib/rheap.c | 24 ++++++++++++++++++++----
include/asm-ppc/rheap.h | 4 ++++
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index ff70964..fe61c92 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -14,6 +14,7 @@ endif
obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o \
strcase.o
+obj-$(CONFIG_QUICC_ENGINE) += rheap.o
obj-$(CONFIG_PPC_ISERIES) += e2a.o
obj-$(CONFIG_XMON) += sstep.o
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 31e5118..57bf991 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -423,17 +423,21 @@ void *rh_detach_region(rh_info_t * info,
return (void *)s;
}
-void *rh_alloc(rh_info_t * info, int size, const char *owner)
+void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner)
{
struct list_head *l;
rh_block_t *blk;
rh_block_t *newblk;
void *start;
- /* Validate size */
- if (size <= 0)
+ /* Validate size, (must be power of two) */
+ if (size <= 0 || (alignment & (alignment - 1)) != 0)
return ERR_PTR(-EINVAL);
+ /* given alignment larger that default rheap alignment */
+ if (alignment > info->alignment)
+ size += alignment - 1;
+
/* Align to configured alignment */
size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
@@ -476,15 +480,27 @@ void *rh_alloc(rh_info_t * info, int siz
attach_taken_block(info, newblk);
+ /* for larger alignment return fixed up pointer */
+ /* this is no problem with the deallocator since */
+ /* we scan for pointers that lie in the blocks */
+ if (alignment > info->alignment)
+ start = (void *)(((unsigned long)start + alignment - 1) &
+ ~(alignment - 1));
+
return start;
}
+void *rh_alloc(rh_info_t * info, int size, const char *owner)
+{
+ return rh_alloc_align(info, size, info->alignment, owner);
+}
+
/* allocate at precisely the given address */
void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
{
struct list_head *l;
rh_block_t *blk, *newblk1, *newblk2;
- unsigned long s, e, m, bs, be;
+ unsigned long s, e, m, bs = 0, be = 0;
/* Validate size */
if (size <= 0)
diff --git a/include/asm-ppc/rheap.h b/include/asm-ppc/rheap.h
index e6ca1f6..65b9322 100644
--- a/include/asm-ppc/rheap.h
+++ b/include/asm-ppc/rheap.h
@@ -62,6 +62,10 @@ extern int rh_attach_region(rh_info_t *
/* Detach a free region */
extern void *rh_detach_region(rh_info_t * info, void *start, int size);
+/* Allocate the given size from the remote heap (with alignment) */
+extern void *rh_alloc_align(rh_info_t * info, int size, int alignment,
+ const char *owner);
+
/* Allocate the given size from the remote heap */
extern void *rh_alloc(rh_info_t * info, int size, const char *owner);
^ permalink raw reply related
* Re: [POWERPC] mark BUG() as noreturn
From: Jimi Xenidis @ 2006-09-21 12:18 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: ppc-dev, paulus, Hollis Blanchard
In-Reply-To: <20060921145522.366a3b03.sfr@canb.auug.org.au>
On Sep 21, 2006, at 12:55 AM, Stephen Rothwell wrote:
> From an idea from Michael Ellerman.
>
> We finish the BUG() macro with a call to a function marked with
> attribute
> "noreturn" so that the compiler will know that BUG() and BUG_ON()
> (with a constant, non-zero argument) will not return.
But BUG() _can_ return, if I have a probe, xmon or kgdb configured it
is possible to play with the state of the world and try to continue/
recover, (xmon "x" command). IMHO, this is a powerful debugging
scenario.
Why are we concerned with the performance of this anyway?
-JX
^ permalink raw reply
* [PATCH 9/11] Add ucc_geth driver data structure
From: Li Yang @ 2006-09-21 12:19 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
include/linux/fsl_devices.h | 39 ++++++++++++++++++++++++++++++++++++++-
1 files changed, 38 insertions(+), 1 deletions(-)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 16fbe59..a16d82f 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -83,7 +83,6 @@ struct fsl_i2c_platform_data {
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
@@ -121,5 +120,43 @@ struct fsl_spi_platform_data {
u32 sysclk;
};
+/* Ethernet interface (phy management and speed)
+*/
+typedef enum enet_interface {
+ ENET_10_MII, /* 10 Base T, MII interface */
+ ENET_10_RMII, /* 10 Base T, RMII interface */
+ ENET_10_RGMII, /* 10 Base T, RGMII interface */
+ ENET_100_MII, /* 100 Base T, MII interface */
+ ENET_100_RMII, /* 100 Base T, RMII interface */
+ ENET_100_RGMII, /* 100 Base T, RGMII interface */
+ ENET_1000_GMII, /* 1000 Base T, GMII interface */
+ ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
+ ENET_1000_TBI, /* 1000 Base T, TBI interface */
+ ENET_1000_RTBI /* 1000 Base T, RTBI interface */
+} enet_interface_e;
+
+struct ucc_geth_platform_data {
+ /* device specific information */
+ u32 device_flags;
+ u32 phy_reg_addr;
+
+ /* board specific information */
+ u32 board_flags;
+ u8 rx_clock;
+ u8 tx_clock;
+ u32 phy_id;
+ enet_interface_e phy_interface;
+ u32 phy_interrupt;
+ u8 mac_addr[6];
+};
+
+/* Flags related to UCC Gigabit Ethernet device features */
+#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
+#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
+#define FSL_UGETH_DEV_HAS_RMON 0x00000004
+
+/* Flags in ucc_geth_platform_data */
+#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001 /* if not set use a timer */
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
^ permalink raw reply related
* [PATCH 10/11] Add MPC8360EMDS board support
From: Li Yang @ 2006-09-21 12:20 UTC (permalink / raw)
To: linuxppc-dev
The patch adds MPC8360EMDS board support.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Yin Olivia <hong-hua.yin@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/configs/mpc8360emds_defconfig | 1018 ++++++++++++++++++++++++++++
arch/powerpc/platforms/83xx/Kconfig | 17
arch/powerpc/platforms/83xx/Makefile | 1
arch/powerpc/platforms/83xx/mpc8360e_pb.c | 204 ++++++
arch/powerpc/platforms/83xx/mpc8360e_pb.h | 31 +
5 files changed, 1271 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc8360emds_defconfig
new file mode 100644
index 0000000..eedbd2d
--- /dev/null
+++ b/arch/powerpc/configs/mpc8360emds_defconfig
@@ -0,0 +1,1018 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18
+# Thu Sep 21 18:14:27 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_QUICC_ENGINE=y
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC834x_ITX is not set
+CONFIG_MPC8360E_PB=y
+CONFIG_MPC836x=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_NAPI is not set
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMOND is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# QE Options
+#
+# CONFIG_UCC_SLOW is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 5fe7b7f..a5d349b 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -25,6 +25,13 @@ config MPC834x_ITX
Be aware that PCI initialization is the bootloader's
responsiblilty.
+config MPC8360E_PB
+ bool "Freescale MPC8360E PB"
+ select DEFAULT_UIMAGE
+ select QUICC_ENGINE
+ help
+ This option enables support for the MPC836x EMDS Processor Board.
+
endchoice
config MPC834x
@@ -33,4 +40,14 @@ config MPC834x
select PPC_INDIRECT_PCI
default y if MPC834x_SYS || MPC834x_ITX
+config MPC836x
+ bool
+ select PPC_UDBG_16550
+ select PPC_INDIRECT_PCI
+ default y if MPC8360E_PB
+
+config 834x_USB_SUPPORT
+ bool
+ default y if MPC834x_SYS && (USB || USB_GADGET)
+
endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 9387a11..0da2d0d 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -5,3 +5,4 @@ obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
+obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
new file mode 100644
index 0000000..b4692d7
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS PB board specific routines.
+ *
+ * Changelog:
+ * Jun 21, 2006 Initial version
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#ifdef CONFIG_QUICC_ENGINE
+#include <asm/immap_qe.h>
+#include <asm/qe_ic.h>
+#endif /* CONFIG_QUICC_ENGINE */
+#include "mpc83xx.h"
+#include "mpc8360e_pb.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8360_sys_setup_arch(void)
+{
+ struct device_node *np;
+
+#ifdef CONFIG_QUICC_ENGINE
+ u8 *bcsr_regs;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8360_sys_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ unsigned int *fp =
+ (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ par_io_of_config(np);
+
+ if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
+ != NULL){
+ /* Reset the Ethernet PHY */
+ bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+ bcsr_regs[9] &= ~0x20;
+ udelay(1000);
+ bcsr_regs[9] |= 0x20;
+ iounmap(bcsr_regs);
+ of_node_put(np);
+ }
+
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc8360_sys_init_IRQ(void)
+{
+
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+ of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+
+ qe_ic_init(np, 0);
+ of_node_put(np);
+#endif /* CONFIG_QUICC_ENGINE */
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
+
+static int __init mpc8360_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.get_rtc_time = ds1374_get_rtc_time;
+ ppc_md.set_rtc_time = ds1374_set_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time) ();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+
+late_initcall(mpc8360_rtc_hookup);
+#endif
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8360_sys_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "MPC8360EPB"))
+ return 0;
+
+ DBG("MPC8360EMDS-PB found\n");
+
+ return 1;
+}
+
+define_machine(mpc8360_sys) {
+ .name = "MPC8360E PB",
+ .probe = mpc8360_sys_probe,
+ .setup_arch = mpc8360_sys_setup_arch,
+ .init_IRQ = mpc8360_sys_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.h b/arch/powerpc/platforms/83xx/mpc8360e_pb.h
new file mode 100644
index 0000000..84282e5
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Yin Olivia <Hong-hua.Yin@freescale.com>
+ *
+ * Description:
+ * MPC8360E MDS PB board specific header.
+ *
+ * Changelog:
+ * Jun 21, 2006 Initial version
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC83XX_SYS_H__
+#define __MACH_MPC83XX_SYS_H__
+
+#define BCSR_PHYS_ADDR ((uint)0xf8000000)
+#define BCSR_SIZE ((uint)(32 * 1024))
+
+#ifdef CONFIG_QUICC_ENGINE
+extern void qe_reset(void);
+extern int par_io_of_config(struct device_node *np);
+#endif /* CONFIG_QUICC_ENGINE */
+
+#endif /* __MACH_MPC83XX_SYS_H__ */
^ permalink raw reply related
* [PATCH 11/11] Add MPC8360EMDS default dts file
From: Li Yang @ 2006-09-21 12:20 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jiang Bo <Tanya.jiang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
arch/powerpc/boot/dts/mpc8360emds.dts | 364 +++++++++++++++++++++++++++++++++
1 files changed, 364 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts
new file mode 100644
index 0000000..ad3beec
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8360emds.dts
@@ -0,0 +1,364 @@
+/*
+ * MPC8360E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/ 00000000 1000000;
+*/
+
+/ {
+ model = "MPC8360EPB";
+ compatible = "MPC83xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8360@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <3EF1480>;
+ bus-frequency = <FBC5200>;
+ clock-frequency = <1F78A400>;
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 10000000>;
+ };
+
+ soc8360@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <FBC5200>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <FBC5200>;
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <FBC5200>;
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+ /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ pci@8500 {
+ linux,phandle = <8500>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 AD17 */
+ 8800 0 0 1 700 14 8
+ 8800 0 0 2 700 15 8
+ 8800 0 0 3 700 16 8
+ 8800 0 0 4 700 17 8
+
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 700 16 8
+ 9000 0 0 2 700 17 8
+ 9000 0 0 3 700 14 8
+ 9000 0 0 4 700 15 8
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 700 17 8
+ 9800 0 0 2 700 14 8
+ 9800 0 0 3 700 15 8
+ 9800 0 0 4 700 16 8
+
+ /* IDSEL 0x15 AD21*/
+ a800 0 0 1 700 14 8
+ a800 0 0 2 700 15 8
+ a800 0 0 3 700 16 8
+ a800 0 0 4 700 17 8
+
+ /* IDSEL 0x16 AD22*/
+ b000 0 0 1 700 17 8
+ b000 0 0 2 700 14 8
+ b000 0 0 3 700 15 8
+ b000 0 0 4 700 16 8
+
+ /* IDSEL 0x17 AD23*/
+ b800 0 0 1 700 16 8
+ b800 0 0 2 700 17 8
+ b800 0 0 3 700 14 8
+ b800 0 0 4 700 15 8
+
+ /* IDSEL 0x18 AD24*/
+ c000 0 0 1 700 15 8
+ c000 0 0 2 700 16 8
+ c000 0 0 3 700 17 8
+ c000 0 0 4 700 14 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ pic@700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+
+ par_io@1400 {
+ reg = <1400 100>;
+ device_type = "par_io";
+ ucc_pin@01 {
+ linux,phandle = <140001>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 3 1 0 1 0 /* TxD0 */
+ 0 4 1 0 1 0 /* TxD1 */
+ 0 5 1 0 1 0 /* TxD2 */
+ 0 6 1 0 1 0 /* TxD3 */
+ 1 6 1 0 3 0 /* TxD4 */
+ 1 7 1 0 1 0 /* TxD5 */
+ 1 9 1 0 2 0 /* TxD6 */
+ 1 a 1 0 2 0 /* TxD7 */
+ 0 9 2 0 1 0 /* RxD0 */
+ 0 a 2 0 1 0 /* RxD1 */
+ 0 b 2 0 1 0 /* RxD2 */
+ 0 c 2 0 1 0 /* RxD3 */
+ 0 d 2 0 1 0 /* RxD4 */
+ 1 1 2 0 2 0 /* RxD5 */
+ 1 0 2 0 2 0 /* RxD6 */
+ 1 4 2 0 2 0 /* RxD7 */
+ 0 7 1 0 1 0 /* TX_EN */
+ 0 8 1 0 1 0 /* TX_ER */
+ 0 f 2 0 1 0 /* RX_DV */
+ 0 10 2 0 1 0 /* RX_ER */
+ 0 0 2 0 1 0 /* RX_CLK */
+ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
+ 2 8 2 0 1 0>; /* GTX125 - CLK9 */
+ };
+ ucc_pin@02 {
+ linux,phandle = <140002>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 11 1 0 1 0 /* TxD0 */
+ 0 12 1 0 1 0 /* TxD1 */
+ 0 13 1 0 1 0 /* TxD2 */
+ 0 14 1 0 1 0 /* TxD3 */
+ 1 2 1 0 1 0 /* TxD4 */
+ 1 3 1 0 2 0 /* TxD5 */
+ 1 5 1 0 3 0 /* TxD6 */
+ 1 8 1 0 3 0 /* TxD7 */
+ 0 17 2 0 1 0 /* RxD0 */
+ 0 18 2 0 1 0 /* RxD1 */
+ 0 19 2 0 1 0 /* RxD2 */
+ 0 1a 2 0 1 0 /* RxD3 */
+ 0 1b 2 0 1 0 /* RxD4 */
+ 1 c 2 0 2 0 /* RxD5 */
+ 1 d 2 0 3 0 /* RxD6 */
+ 1 b 2 0 2 0 /* RxD7 */
+ 0 15 1 0 1 0 /* TX_EN */
+ 0 16 1 0 1 0 /* TX_ER */
+ 0 1d 2 0 1 0 /* RX_DV */
+ 0 1e 2 0 1 0 /* RX_ER */
+ 0 1f 2 0 1 0 /* RX_CLK */
+ 2 2 1 0 2 0 /* GTX_CLK - CLK10 */
+ 2 3 2 0 1 0 /* GTX125 - CLK4 */
+ 0 1 3 0 2 0 /* MDIO */
+ 0 2 1 0 1 0>; /* MDC */
+ };
+
+ };
+ };
+
+ qe@e0100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0100000 00100000>;
+ reg = <e0100000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <179A7B00>;
+
+ spi@4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <2>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ spi@500 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <500 40>;
+ interrupts = <1>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ brg@640 {
+ device_type = "brg";
+ reg = <668 4>;
+ };
+
+ usb@6c0 {
+ device_type = "usb";
+ compatible = "qe_udc";
+ reg = <6c0 40 8B00 100>;
+ interrupts = <b>;
+ interrupt-parent = <80>;
+ mode = "slave";
+ };
+
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <1>;
+ reg = <2000 200 8400 100>;
+ interrupts = <20>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 04 9f 00 23 23 ];
+ rx-clock = <0>;
+ tx-clock = <19>;
+ phy-handle = <212000>;
+ pio-handle = <140001>;
+ };
+
+ ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <2>;
+ reg = <3000 200 8500 100>;
+ interrupts = <21>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ rx-clock = <0>;
+ tx-clock = <14>;
+ phy-handle = <212001>;
+ pio-handle = <140002>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2120 18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ ethernet-phy@00 {
+ linux,phandle = <212000>;
+ interrupt-parent = <700>;
+ interrupts = <11 2>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ interface = <6>; //ENET_1000_GMII
+ };
+ ethernet-phy@01 {
+ linux,phandle = <212001>;
+ interrupt-parent = <700>;
+ interrupts = <12 2>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ interface = <6>;
+ };
+ };
+
+ qeic@80 {
+ linux,phandle = <80>;
+ interrupt-controller;
+ device_type = "qeic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <80 80>;
+ built-in;
+ big-endian;
+ interrupts = <20 8 21 8>; //high:32 low:33
+ interrupt-parent = <700>;
+ };
+
+ };
+};
^ permalink raw reply related
* Re: [PATCH]: powerpc: clarify use of twi/isync in io macros
From: Paul Mackerras @ 2006-09-21 12:41 UTC (permalink / raw)
To: Linas Vepstas; +Cc: Stephen Rothwell, ppc-dev
In-Reply-To: <20060919193020.GN29167@austin.ibm.com>
Linas Vepstas writes:
> + * A data-dependent branch followed by an isync ensures that no
> + * instructions after the isync in program order will be
> + * (speculatively) executed, so the load that the twi depends
> + * on has to complete before anything else is executed; in
While the statement about branches is true, it's not especially
relevant when it comes to twi. What's happening is that isync has to
prevent any following instructions from starting execution until all
previous instructions have completed, meaning that they have got to
the point of knowing whether they will generate an exception or not.
In general the processor doesn't know whether twi will generate an
exception until the data it depends on is available, and that's why
the isync has to wait for the previous load to have returned the
data.
> + * particular, it's a barrier to keep MMIO reads ordered before
> + * main-storage accesses.
Yes.
Paul.
^ permalink raw reply
* Re: [POWERPC] mark BUG() as noreturn
From: David Howells @ 2006-09-21 13:23 UTC (permalink / raw)
To: Jimi Xenidis; +Cc: Stephen Rothwell, paulus, Hollis Blanchard, ppc-dev
In-Reply-To: <135B477D-5DF8-48E9-94FD-A114A4526177@watson.ibm.com>
Jimi Xenidis <jimix@watson.ibm.com> wrote:
> > We finish the BUG() macro with a call to a function marked with
> > attribute
> > "noreturn" so that the compiler will know that BUG() and BUG_ON()
> > (with a constant, non-zero argument) will not return.
>
> But BUG() _can_ return, if I have a probe, xmon or kgdb configured it
> is possible to play with the state of the world and try to continue/
> recover, (xmon "x" command). IMHO, this is a powerful debugging
> scenario.
It could be made configurable.
OTOH, it is handy to mark BUG() as not being able to return as that tells the
compiler that it doesn't have to check that the code path through the BUG()
call is complete and this means it can be more relaxed about generating
warnings about potentially unused variables and suchlike.
David
^ permalink raw reply
* Re: [PATCH] Start arch/powerpc/boot code reorganization
From: Matt Porter @ 2006-09-21 13:37 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <C2AFCB31-CFC2-4B0E-ADAE-380A612D1053@kernel.crashing.org>
On Thu, Sep 21, 2006 at 02:07:05AM +0200, Segher Boessenkool wrote:
> If you use a different name than "address", you're not bound to its
> semantics either. And as those semantics have some problems, please
> do change-em. How about:
>
> The "reg-virtual-address" property contains the same regions as the
> "reg" property, in the same order; each entry is #address-cells from
> the root node 32-bit integers wide(*); the entry describes a
> contiguous area of virtual memory of the same size as the
> corresponding "reg" entry, mapping that area, or 0 if the area isn't
> mapped.
>
> Any holes in this definition?
On PPC44x (and other PowerPC processors) the number of address cells
to represent a virtual address and a physical address differ due the
36-bits of physical address space. Regardless of the name of the
new property, it should be defined to allow a different number of
address cells to represent an address in virtual address space.
>
> (*) This isn't strictly correct, but OF doesn't describe the size of
> virtual addresses anywhere. In practice, it's the same as the size
> of physical addresses always. Oh, and the name "virtual" isn't correct
> in PowerPC-speak anyway, heh.
Actually, in practice, it's not always the same size as a physical
address. We have 36-bit physical addressing systems in the real world.
FWIW, I'd be happy with this property name or fw,address. When we
discussed this on IRC the thought was to conform to what already
existed for this purpose in the OF spec. Since the address prop sounds
like it will confuse some people I think it makes sense to add a
new property (might as well just throw out the spec :P).
-Matt
^ permalink raw reply
* Re: A question about power on
From: Ben Warren @ 2006-09-21 13:47 UTC (permalink / raw)
To: enorm; +Cc: linuxppc-embedded
In-Reply-To: <001401c6dd6e$a01d65a0$a309a8c0@enorm>
On Thu, 2006-09-21 at 19:11 +0800, enorm wrote:
> After power on, cpu reads instruction from certain addr. But how does it
> know how many bits he can read at once.
This can't be generalized. Read the "Reset, Clocking and
Initialization", or equivalent, chapter of your CPU's reference manual.
^ permalink raw reply
* Re: [Fastboot] [PATCH] kexec: remove memory reserve patching for powerpc device tree
From: Vivek Goyal @ 2006-09-21 13:55 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev, Horms, Fastboot mailing list
In-Reply-To: <1158810033.7062.23.camel@localhost.localdomain>
On Thu, Sep 21, 2006 at 01:40:33PM +1000, Michael Ellerman wrote:
> On Thu, 2006-09-21 at 11:51 +0900, Horms wrote:
> > On Thu, Sep 21, 2006 at 11:59:04AM +1000, Michael Ellerman wrote:
> > > On Thu, 2006-09-21 at 11:10 +1000, Michael Neuling wrote:
> > > > This code no longer needed with Jimi's auto reserve of device tree blob
> > > > kernel patch now in 2.6.18.
> > > >
> > > > This patch will break Linux if you're kexecing to a kernel which doesn't
> > > > have this patch (ie. earlier than 2.6.17). Required kernel patch is
> > > > this one:
> > > > http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4d1f3f25d9c303d1ce63b42cc94c54ac0ab2e950
> > > >
> > >
> > > Although it'd be nice to get rid of that code, I'm not sure we want to
> > > go breaking this. This will mean RHEL5 and SLES10 users can't use
> > > upstream kexec-tools :/
> >
> > Surely if they are using a RHEL5 or SLES10 kernel then its
> > reasonably to expect they are also using a RHEL5 or SLES10 supplied
> > kexec-tool.
>
> Or Ubuntu Dapper .. Debian Stable .. FC whatever. In general they'll be
> using the distro tools sure, but I'd rather not force them to. I
> generally expect to be able to run mainline kernels without upgrading my
> entire distro - it should cut both ways IMHO.
>
Now with distros adopting kexce-tools, I am in for maintaining the backward
compatibility as far as possible. Putting a note in the code is good that
down the line, get rid of this code.
-Vivek
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox