* I2C Driver for mpc8272
From: Folden Dwayne @ 2006-10-10 15:52 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 530 bytes --]
If anyone is interested I have a working module for the mpc8272 under the Linux 2.6.11 kernel.
If you want this driver please compile a list of email addresses and email me the request with the list in the CC field and I will do a blanket reply to all with the files. This driver was compiled using Freescale Codewarrior for Linux.
This driver is a generic driver which uses the CPM and has been successfully interfaced to a TMP100 (TI temp sensor) and a PCF8574 (TI 8-bit I/O expander).
Good luck to all
Dwayne Folden
[-- Attachment #2: Type: text/html, Size: 1041 bytes --]
^ permalink raw reply
* Re: [PATCH 3/4] powerpc: Add simple memory allocator to bootwrapper
From: Mark A. Greer @ 2006-10-10 16:00 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <1160484668.28727.4.camel@zod.rchland.ibm.com>
On Tue, Oct 10, 2006 at 07:51:08AM -0500, Josh Boyer wrote:
> On Mon, 2006-10-09 at 23:12 -0700, Mark A. Greer wrote:
> > Provide primitive malloc, free, and realloc functions for bootwrapper.
>
> The order is a bit off here. This should be patch 4/4, as the Makefile
> needs the ns16550.c changes introduced by "[PATCH 4/4] powerpc: Add
> non-OF serial console support", which should be patch 3/4.
Oops, I switched the order at the last minute. I'll switch back.
Mark
^ permalink raw reply
* Re: [PATCH 3/4] powerpc: Add simple memory allocator to bootwrapper
From: Mark A. Greer @ 2006-10-10 15:59 UTC (permalink / raw)
To: Mark A. Greer, Paul Mackerras, linuxppc-dev
In-Reply-To: <20061010062538.GB18681@localhost.localdomain>
On Tue, Oct 10, 2006 at 04:25:38PM +1000, David Gibson wrote:
> On Mon, Oct 09, 2006 at 11:12:46PM -0700, Mark A. Greer wrote:
> > Provide primitive malloc, free, and realloc functions for bootwrapper.
>
> [snip]
> > +/*
> > + * Change size of area pointed to by 'ptr' to 'size'.
> > + * If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free().
> > + * 'ptr' must be NULL or a value previously returned by simple_realloc().
> > + */
> > +static void *simple_realloc(void *ptr, unsigned long size)
> > +{
> > + if (size == 0) {
> > + simple_free(ptr);
> > + return NULL;
> > + }
> > + else if (ptr == NULL)
> > + return simple_malloc(size);
> > + else {
> > + simple_free(ptr);
> > + return simple_malloc(size);
> > + }
> > +}
>
> Um.. the above is clearly broken, it will throw away the data in a
> realloc()ed block.
Yes, too much of a hurry, I guess. I'll fix.
Mark
^ permalink raw reply
* RE: Linuxppc-embedded Digest, Vol 26, Issue 13
From: Yoshio Kashiwagi @ 2006-10-10 15:50 UTC (permalink / raw)
To: Jaap de Jong, linuxppc-embedded
In-Reply-To: <6915D0AE8B9047438F320B466AE30FDD798359@nvs0003.nedap.local>
Hi,
Thanks for your advice.
Although I was not verifying "Digest Vol26 Issue13", cache needed to be
turned OFF for operating 2.4 kernels by Avnet v4fx12mm.
However, when the same kernel was operated by ML403, even if it did not
turn OFF cache, it was operating normally.
Although the default reference design is not verified by v4fx12mm
recently, it is operating normally by 2.6.17.3 kernel and MPMC2 now.
However, if there is fault of infalte in 2.6.17 kernels, there is E-Mail
of Dave-San. Since the ramdisk capacity is 2MB that initrd is operating
normally in my kernel.
Best Regards,
Yoshio Kashiwagi - Nissin Systems
> Not sure...
> I have not been playing with 2.6 kernels but this looks a lot like
> the problems I found when trying to get the 2.4 kernel to work.
> Default for the avnet v4fx12 is to use the opb bus as raminterface.
> You should explicitly select the plb bus...
>
> Jaap de Jong
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 06 Oct 2006 10:33:53 +0900
> From: Yoshio Kashiwagi <kashiwagi@co-nss.co.jp>
> Subject: Re: Problem with initrd
> To: Glenn.G.Hart@us.westinghouse.com, linuxppc-embedded@ozlabs.org
> Message-ID: <JF2006100610335316.6823078@co-nss.co.jp>
> Content-Type: text/plain; charset=ISO-2022-JP
>
> Glenn-San,
>
> Are you developing by the custom-made hardware of V4FX12?
> If the 16-bit memory controller is used, it may have a problem in the
> memory controller.
>
> Can you try the memory controller of http://www.xilinx.com/mpmc2?
> I confirmed that the 16-bit memory controller of MPMC2 worked
correctly
> by Linux. Or I can send the ramdisk image for 2.6.17.3 kernel which I
am
> using to you.
>
> Yoshio kashiwagi - Nissin Systems
>
__________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
^ permalink raw reply
* zImage wrapper broken when cross compiling on Intel
From: Adam Litke @ 2006-10-10 15:39 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hey Paul. My cross compile environment has been broken by the zImage
wrapper stuff. I set both CROSS_COMPILE and CROSS32_COMPILE and build
my pSeries kernels on an Intel box. The current logic is setting
CROSSWRAP := -C $(CROSS32_COMPILE) but my cross32 tools don't understand
the 64bit binaries I built :)
I am not quite sure how to properly handle my case without breaking one
of the other cases you are probably accounting for with the current
logic. For the time being I've hacked my Makefile with the following
patch (just to get things working again for me).
Makefile | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff -upN reference/arch/powerpc/boot/Makefile current/arch/powerpc/boot/Makefile
--- reference/arch/powerpc/boot/Makefile
+++ current/arch/powerpc/boot/Makefile
@@ -104,13 +104,13 @@ wrapperbits := $(extra-y) $(addprefix $(
#############
# Bits for building various flavours of zImage
-ifneq ($(CROSS32_COMPILE),)
-CROSSWRAP := -C $(CROSS32_COMPILE)
-else
+#ifneq ($(CROSS32_COMPILE),)
+#CROSSWRAP := -C $(CROSS32_COMPILE)
+#else
ifneq ($(CROSS_COMPILE),)
CROSSWRAP := -C $(CROSS_COMPILE)
endif
-endif
+#endif
quiet_cmd_wrap = WRAP $@
cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux
--
Adam Litke - (agl at us.ibm.com)
IBM Linux Technology Center
^ permalink raw reply
* Re: [PATCH 3/4] [PATCH] Replace HAVE_ARCH_PCI_MWI with PCI_DISABLE_MWI
From: Matthew Wilcox @ 2006-10-10 15:03 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linuxppc-dev, linux-pci, Paul Mackerras
In-Reply-To: <11604888833435-git-send-email-matthew@wil.cx>
More get-send-email brokenness. I've fixed that in my local copy and
sent the patch to the git mailing list now, so this shouldn't happen
again.
On Tue, Oct 10, 2006 at 08:01:21AM -0600, Matthew Wilcox wrote:
> From: Paul Mackerras <paulus@samba.org>, linuxppc-dev@ozlabs.org
>
> pSeries is the only architecture left using HAVE_ARCH_PCI_MWI and it's
> really inappropriate for its needs. It really wants to disable MWI
> altogether. So here are a pair of stub implementations for pci_set_mwi
> and pci_clear_mwi.
>
> Also rename pci_generic_prep_mwi to pci_set_cacheline_size since that
> better reflects what it does.
>
> Signed-off-by: Matthew Wilcox <matthew@wil.cx>
> ---
> drivers/pci/pci.c | 31 ++++++++++++++++++-------------
> include/asm-powerpc/pci.h | 20 +++++++-------------
> 2 files changed, 25 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 2b93aaf..fc97b91 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -831,7 +831,17 @@ pci_set_master(struct pci_dev *dev)
> pcibios_set_master(dev);
> }
>
> -#ifndef HAVE_ARCH_PCI_MWI
> +#ifdef PCI_DISABLE_MWI
> +int pci_set_mwi(struct pci_dev *dev)
> +{
> + return 0;
> +}
> +
> +void pci_clear_mwi(struct pci_dev *dev)
> +{
> +}
> +
> +#else
>
> #ifndef PCI_CACHE_LINE_BYTES
> #define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
> @@ -842,17 +852,17 @@ #endif
> u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
>
> /**
> - * pci_generic_prep_mwi - helper function for pci_set_mwi
> - * @dev: the PCI device for which MWI is enabled
> + * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
> + * @dev: the PCI device for which MWI is to be enabled
> *
> - * Helper function for generic implementation of pcibios_prep_mwi
> - * function. Originally copied from drivers/net/acenic.c.
> + * Helper function for pci_set_mwi.
> + * Originally copied from drivers/net/acenic.c.
> * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
> *
> * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
> */
> static int
> -pci_generic_prep_mwi(struct pci_dev *dev)
> +pci_set_cacheline_size(struct pci_dev *dev)
> {
> u8 cacheline_size;
>
> @@ -878,7 +888,6 @@ pci_generic_prep_mwi(struct pci_dev *dev
>
> return -EINVAL;
> }
> -#endif /* !HAVE_ARCH_PCI_MWI */
>
> /**
> * pci_set_mwi - enables memory-write-invalidate PCI transaction
> @@ -896,12 +905,7 @@ pci_set_mwi(struct pci_dev *dev)
> int rc;
> u16 cmd;
>
> -#ifdef HAVE_ARCH_PCI_MWI
> - rc = pcibios_prep_mwi(dev);
> -#else
> - rc = pci_generic_prep_mwi(dev);
> -#endif
> -
> + rc = pci_set_cacheline_size(dev);
> if (rc)
> return rc;
>
> @@ -932,6 +936,7 @@ pci_clear_mwi(struct pci_dev *dev)
> pci_write_config_word(dev, PCI_COMMAND, cmd);
> }
> }
> +#endif /* ! PCI_DISABLE_MWI */
>
> /**
> * pci_intx - enables/disables PCI INTx for device dev
> diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
> index 46afd29..721c97f 100644
> --- a/include/asm-powerpc/pci.h
> +++ b/include/asm-powerpc/pci.h
> @@ -62,19 +62,13 @@ static inline int pci_get_legacy_ide_irq
> }
>
> #ifdef CONFIG_PPC64
> -#define HAVE_ARCH_PCI_MWI 1
> -static inline int pcibios_prep_mwi(struct pci_dev *dev)
> -{
> - /*
> - * We would like to avoid touching the cacheline size or MWI bit
> - * but we cant do that with the current pcibios_prep_mwi
> - * interface. pSeries firmware sets the cacheline size (which is not
> - * the cpu cacheline size in all cases) and hardware treats MWI
> - * the same as memory write. So we dont touch the cacheline size
> - * here and allow the generic code to set the MWI bit.
> - */
> - return 0;
> -}
> +
> +/*
> + * We want to avoid touching the cacheline size or MWI bit.
> + * pSeries firmware sets the cacheline size (which is not the cpu cacheline
> + * size in all cases) and hardware treats MWI the same as memory write.
> + */
> +#define PCI_DISABLE_MWI
>
> extern struct dma_mapping_ops pci_dma_ops;
>
> --
> 1.4.1.1
^ permalink raw reply
* Re: linux hang at a random place on booting
From: Yoshio Kashiwagi @ 2006-10-10 15:09 UTC (permalink / raw)
To: lzh, linuxppc-embedded
In-Reply-To: <452B88BF.000156.24582@bj126app2.126.com>
Hi,
If the u-boot version of your MPC8540ADS board is 1.0.1, it is necessary
to apply the latest u-boot1.1.4.
Moreover, if MPC8540ADS and u-boot1.1.4 are used, 2.6.17 and 2.6.18
kernels of kernel.org should be used without modification.
Yoshio Kashiwagi - Nissin Systems
> hi,
> i built a linux-2.6.11 kernel for mpc8540ads board。linux hang at a
random place on booting.
> can anybody help?
> thank you!
>
> 胆 溺 心 阻 祥 ・ 勣 ( 夕 )
> 蒸 斤 総 窃 ! 才 析 禿 海 邪 豚 寂 議 移 社 芝 村 ( 怏 夕 )
^ permalink raw reply
* Re: [PATCH 3/4] powerpc: Add simple memory allocator to bootwrapper
From: Josh Boyer @ 2006-10-10 12:51 UTC (permalink / raw)
To: Mark A. Greer; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <20061010061246.GD28311@mag.az.mvista.com>
On Mon, 2006-10-09 at 23:12 -0700, Mark A. Greer wrote:
> Provide primitive malloc, free, and realloc functions for bootwrapper.
The order is a bit off here. This should be patch 4/4, as the Makefile
needs the ns16550.c changes introduced by "[PATCH 4/4] powerpc: Add
non-OF serial console support", which should be patch 3/4.
josh
^ permalink raw reply
* linux hang at a random place on booting
From: lzh @ 2006-10-10 11:49 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 135 bytes --]
hi,
i built a linux-2.6.11 kernel for mpc8540ads board。linux hang at a random place on booting.
can anybody help?
thank you!
[-- Attachment #2: Type: text/html, Size: 698 bytes --]
^ permalink raw reply
* Re: [PATCH] powerpc: Fix windfarm platform device usage
From: Benjamin Herrenschmidt @ 2006-10-10 12:19 UTC (permalink / raw)
To: Robin H. Johnson; +Cc: linuxppc-dev list, Paul Mackerras
In-Reply-To: <20061010120923.GA1516@curie-int.orbis-terrarum.net>
On Tue, 2006-10-10 at 05:09 -0700, Robin H. Johnson wrote:
> On Tue, Oct 10, 2006 at 11:47:31AM +1000, Benjamin Herrenschmidt wrote:
> > The windfarm code uses a struct device_driver instead of
> > platform_driver, which can cause crashes if any of the callbacks are
> > called (like on module removal). This fixes it.
> Thanks! This makes my windfarm work a lot easier!
> (I am still working on it, just very slowly).
Ah good news :)
Ben.
^ permalink raw reply
* Re: [PATCH] powerpc: Fix windfarm platform device usage
From: Robin H. Johnson @ 2006-10-10 12:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev list, Paul Mackerras
In-Reply-To: <1160444851.32237.41.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 479 bytes --]
On Tue, Oct 10, 2006 at 11:47:31AM +1000, Benjamin Herrenschmidt wrote:
> The windfarm code uses a struct device_driver instead of
> platform_driver, which can cause crashes if any of the callbacks are
> called (like on module removal). This fixes it.
Thanks! This makes my windfarm work a lot easier!
(I am still working on it, just very slowly).
--
Robin Hugh Johnson
E-Mail : robbat2@gentoo.org
GnuPG FP : 11AC BA4F 4778 E3F6 E4ED F38E B27B 944E 3488 4E85
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
^ permalink raw reply
* Re: MPC8xx CPM I2C interface driver
From: Abdul Rahaman @ 2006-10-10 9:26 UTC (permalink / raw)
To: Norbert van Bolhuis, linuxppc-embedded
sorry I forgot to mention its MPC 8xx
Can somebody can provide me ramdisk iamge to me (initd.boot)
Or some clear procedure build my self.
Right now my kernel is booting but is not able come to application shell
stage.
Thanks
Rahaman
----- Original Message -----
From: "Abdul Rahaman" <abdul.rahaman@semindia.in>
To: "Norbert van Bolhuis" <nvbolhuis@aimsys.nl>;
<linuxppc-embedded@ozlabs.org>
Sent: Tuesday, October 10, 2006 2:55 PM
Subject: Re: MPC8xx CPM I2C interface driver
> Can somebody can provide me ramdisk iamge to me (initd.boot)
>
> Or some clear procedure build my self.
>
> Right now my kernel is booting but is not able come to application shell
> stage.
>
> Thanks
> Rahaman
> ----- Original Message -----
> From: "Norbert van Bolhuis" <nvbolhuis@aimsys.nl>
> To: <linuxppc-embedded@ozlabs.org>
> Sent: Tuesday, October 10, 2006 2:35 PM
> Subject: MPC8xx CPM I2C interface driver
>
>
> >
> > Is there no MPC8xx CPM I2C interface driver in (latest) linux v2.6 or am
I
> > mistaken ?
> > There's no code for CONFIG_I2C_ALGO8XX.
> >
> > I've a MPC870 based board and I was hoping for a MPC8xx CPM I2C
interface
> driver
> > to be there (allowing user applications to open and read/write
/dev/i2c-0)
> >
> > Thanks,
> > N.
> >
> >
> >
> > --
> > This message has been scanned for viruses and is believed to be clean
> >
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
> >
> >
>
^ permalink raw reply
* Re: MPC8xx CPM I2C interface driver
From: Abdul Rahaman @ 2006-10-10 9:25 UTC (permalink / raw)
To: Norbert van Bolhuis, linuxppc-embedded
In-Reply-To: <452B626D.8050106@aimsys.nl>
Can somebody can provide me ramdisk iamge to me (initd.boot)
Or some clear procedure build my self.
Right now my kernel is booting but is not able come to application shell
stage.
Thanks
Rahaman
----- Original Message -----
From: "Norbert van Bolhuis" <nvbolhuis@aimsys.nl>
To: <linuxppc-embedded@ozlabs.org>
Sent: Tuesday, October 10, 2006 2:35 PM
Subject: MPC8xx CPM I2C interface driver
>
> Is there no MPC8xx CPM I2C interface driver in (latest) linux v2.6 or am I
> mistaken ?
> There's no code for CONFIG_I2C_ALGO8XX.
>
> I've a MPC870 based board and I was hoping for a MPC8xx CPM I2C interface
driver
> to be there (allowing user applications to open and read/write /dev/i2c-0)
>
> Thanks,
> N.
>
>
>
> --
> This message has been scanned for viruses and is believed to be clean
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
>
^ permalink raw reply
* MPC8xx CPM I2C interface driver
From: Norbert van Bolhuis @ 2006-10-10 9:05 UTC (permalink / raw)
To: linuxppc-embedded
Is there no MPC8xx CPM I2C interface driver in (latest) linux v2.6 or am I
mistaken ?
There's no code for CONFIG_I2C_ALGO8XX.
I've a MPC870 based board and I was hoping for a MPC8xx CPM I2C interface driver
to be there (allowing user applications to open and read/write /dev/i2c-0)
Thanks,
N.
--
This message has been scanned for viruses and is believed to be clean
^ permalink raw reply
* Re: 2.6.19-rc1: known regressions (v3)
From: Mel Gorman @ 2006-10-10 8:41 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linuxppc-dev, Linux Kernel Mailing List
In-Reply-To: <20061010051019.GB3650@stusta.de>
On Tue, 10 Oct 2006, Adrian Bunk wrote:
> This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18
> that are not yet fixed Linus' tree.
>
> <snip>
>
> Subject : doesn't boot on iBook G4
> References : http://lkml.org/lkml/2006/10/5/305
> Submitter : Andreas Schwab <schwab@suse.de>
> Handled-By : Mel Gorman <mel@skynet.ie>
> Patch : http://lkml.org/lkml/2006/10/6/80
> Status : patch available
>
This patch is currently in 2.6.18-rc1-mm1 and is called
mm-use-symbolic-names-instead-of-indices-for-zone-initialisation.patch .
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* zImage.prep on 2.6.18 & 2.6.19-rc1-gi5
From: Alexander Baldeck @ 2006-10-10 8:12 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Benoit Chesneau
[-- Attachment #1: Type: text/plain, Size: 1810 bytes --]
Hey all,
Just headed over here from debian-powerpc following a hint by Benjamin.
Hope it's alright to just send the same email again asking Paul
Mackerras for using me as a test subject. :)
I've been trying to get an old Motorola Powerstack II working on Linux
for the past few days. Everything is working fine except for the fact
that I have to use a kernel 2.6.8 or earlier. As I'd like to run newer
udevs this is unfortunately an inacceptible state, no uevents and all.
Now then, to the actual problem which occurs while building the kernel
like so:
$ make zImage
I was used to do that when building kernels and then dd
arch/ppc/boot/images/zImage.prep to my PreP partition. Now with 2.6.18
and 2.6.19-rc-git5 the following error pops up somewhere near the end of
my build:
=======================================================================
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD .tmp_vmlinux3
KSYM .tmp_kallsyms3.S
AS .tmp_kallsyms3.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
ln: accessing `arch/powerpc/boot/zImage': No such file or directory
make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2
=======================================================================
I have tried to find out how that zImage.prep I was using before is
supposed to be built but somehow failed badly. Any pointers on what I
might be doing wrong or have a look at?
Thanks,
Alex
PS: config in attachement is also applying to 2.6.18
[-- Attachment #2: config-2.6.19-rc1-git5 --]
[-- Type: text/plain, Size: 55916 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19
# Tue Oct 10 09:18:48 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-ARCH"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
CONFIG_TAU_AVERAGE=y
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPIC is not set
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SYSFS_DEPRECATED=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_ROUTE_FWMARK=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_NETLABEL=y
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=y
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=y
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Macintosh device drivers
#
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not set
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_ATMEL=m
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_MPC is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_M41T00 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_TIFM_CORE is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
# CONFIG_DVB_USB_DIB0700 is not set
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
# CONFIG_DVB_USB_GP8PSK is not set
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CT65550=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# ALSA PowerMac devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
^ permalink raw reply
* [PATCH] spufs: fix support for read/write on cntl
From: Arnd Bergmann @ 2006-10-10 8:27 UTC (permalink / raw)
To: Noguchi, Masato; +Cc: linuxppc-dev, Paul Mackerras, cbe-oss-dev, linux-kernel
In-Reply-To: <C3DCD550FB9ACD4D911D1271DD8CFDD20113D3E7@jptkyxms38.jp.sony.com>
From: "Noguchi, Masato" <Masato.Noguchi@jp.sony.com>
This fixes a memory leak introduced by "spufs: add support
for read/write oncntl", which was missing a call to simple_attr_close.
Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
---
On Tuesday 10 October 2006 08:49, Noguchi, Masato wrote:
> Oops,
> I'm so sorry. I mistake to send wrong patch.
Ok, no worries. Paul, please use this patch instead.
Index: linux-2.6/arch/powerpc/platforms/cell/spufs/file.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/spufs/file.c
+++ linux-2.6/arch/powerpc/platforms/cell/spufs/file.c
@@ -246,6 +246,7 @@ static int spufs_cntl_open(struct inode
static struct file_operations spufs_cntl_fops = {
.open = spufs_cntl_open,
+ .release = simple_attr_close,
.read = simple_attr_read,
.write = simple_attr_write,
.mmap = spufs_cntl_mmap,
^ permalink raw reply
* Re: [Cbe-oss-dev] [PATCH 09/14] spufs: add support for read/write oncntl
From: Arnd Bergmann @ 2006-10-10 8:11 UTC (permalink / raw)
To: Noguchi, Masato; +Cc: linuxppc-dev, Paul Mackerras, cbe-oss-dev, linux-kernel
In-Reply-To: <C3DCD550FB9ACD4D911D1271DD8CFDD20113D3D7@jptkyxms38.jp.sony.com>
On Tuesday 10 October 2006 08:00, Noguchi, Masato wrote:
> After applying these patches, it seems the kernel leaks memory.
> No doubt you forget to call simple_attr_close on "[PATCH 09/14]
> spufs: add support for read/write oncntl".
Ok, thanks for pointing this out.
> Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Paul, please apply.
Arnd <><
^ permalink raw reply
* RE: [Cbe-oss-dev] [PATCH 09/14] spufs: add support for read/write oncntl
From: Noguchi, Masato @ 2006-10-10 6:49 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linuxppc-dev, Paul Mackerras, Arnd Bergmann, linux-kernel,
cbe-oss-dev
Oops,
I'm so sorry. I mistake to send wrong patch.
Correct version is below:
Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
---
Index:
linux-2.6.18-arnd-20061004/arch/powerpc/platforms/cell/spufs/file.c
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
---
linux-2.6.18-arnd-20061004.orig/arch/powerpc/platforms/cell/spufs/file.c
+++ linux-2.6.18-arnd-20061004/arch/powerpc/platforms/cell/spufs/file.c
@@ -246,6 +246,7 @@ static int spufs_cntl_open(struct inode
static struct file_operations spufs_cntl_fops =3D {
.open =3D spufs_cntl_open,
+ .release =3D simple_attr_close,
.read =3D simple_attr_read,
.write =3D simple_attr_write,
.mmap =3D spufs_cntl_mmap,
> -----Original Message-----
> From: Noguchi, Masato
> Sent: Tuesday, October 10, 2006 3:00 PM
> To: 'Arnd Bergmann'
> Cc: Paul Mackerras; Arnd Bergmann; linuxppc-dev@ozlabs.org;
> cbe-oss-dev@ozlabs.org; linux-kernel@vger.kernel.org
> Subject: RE: [Cbe-oss-dev] [PATCH 09/14] spufs: add support for
read/write
> oncntl
>=20
> After applying these patches, it seems the kernel leaks memory.
> No doubt you forget to call simple_attr_close on "[PATCH 09/14]
> spufs: add support for read/write oncntl".
>=20
> Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
>=20
> ---
>=20
> Index:
linux-2.6.18-arnd-20061004/arch/powerpc/platforms/cell/spufs/file.c
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> ---
>
linux-2.6.18-arnd-20061004.orig/arch/powerpc/platforms/cell/spufs/file.c
> +++
linux-2.6.18-arnd-20061004/arch/powerpc/platforms/cell/spufs/file.c
> @@ -246,6 +246,7 @@ static int spufs_cntl_open(struct inode
>=20
> static struct file_operations spufs_cntl_fops =3D {
> .open =3D spufs_cntl_open,
> + .close =3D simple_attr_close,
> .read =3D simple_attr_read,
> .write =3D simple_attr_write,
> .mmap =3D spufs_cntl_mmap,
>=20
^ permalink raw reply
* Re: [PATCH 3/4] powerpc: Add simple memory allocator to bootwrapper
From: David Gibson @ 2006-10-10 6:25 UTC (permalink / raw)
To: Mark A. Greer; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <20061010061246.GD28311@mag.az.mvista.com>
On Mon, Oct 09, 2006 at 11:12:46PM -0700, Mark A. Greer wrote:
> Provide primitive malloc, free, and realloc functions for bootwrapper.
[snip]
> +/*
> + * Change size of area pointed to by 'ptr' to 'size'.
> + * If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free().
> + * 'ptr' must be NULL or a value previously returned by simple_realloc().
> + */
> +static void *simple_realloc(void *ptr, unsigned long size)
> +{
> + if (size == 0) {
> + simple_free(ptr);
> + return NULL;
> + }
> + else if (ptr == NULL)
> + return simple_malloc(size);
> + else {
> + simple_free(ptr);
> + return simple_malloc(size);
> + }
> +}
Um.. the above is clearly broken, it will throw away the data in a
realloc()ed block.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* [PATCH] powerpc: Add arch/powerpc support for Freescale Sandpoint
From: Mark A. Greer @ 2006-10-10 6:15 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Add support for the Freescale Sandpoint platform to the arch/powerpc tree.
This requires the flat device tree functionality provided by the patch series
started here: http://ozlabs.org/pipermail/linuxppc-dev/2006-October/026738.html
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
boot/Makefile | 11
boot/dts/sandpoint.dts | 218 +++++++
boot/mpc10x.c | 109 +++
boot/sandpoint.c | 162 +++++
configs/sandpoint_defconfig | 1144 ++++++++++++++++++++++++++++++++++++++
platforms/embedded6xx/Kconfig | 2
platforms/embedded6xx/Makefile | 1
platforms/embedded6xx/sandpoint.c | 384 ++++++++++++
8 files changed, 2029 insertions(+), 2 deletions(-)
---
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 2def775..f3eb635 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -41,8 +41,8 @@ zliblinuxheader := zlib.h zconf.h zutil.
$(addprefix $(obj)/,$(zlibheader))
src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c ns16550.c \
- serial.c simple_alloc.c div64.S util.S $(zlib)
-src-plat := of.c
+ serial.c simple_alloc.c mpc10x.c div64.S util.S $(zlib)
+src-plat := of.c sandpoint.c
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -149,6 +149,12 @@ quiet_cmd_wrap_initrd = WRAP $@
$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,miboot)
+$(obj)/zImage.sandpoint: vmlinux $(wrapperbits)
+ $(call cmd,wrap,sandpoint)
+
+$(obj)/zImage.initrd.sandpoint: vmlinux $(wrapperbits)
+ $(call cmd,wrap_initrd,sandpoint)
+
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
@@ -157,6 +163,7 @@ image-$(CONFIG_PPC_MAPLE) += zImage.pser
image-$(CONFIG_PPC_CELL) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
+image-$(CONFIG_SANDPOINT) += zImage.sandpoint
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
# For 32-bit powermacs, build the COFF and miboot images
diff --git a/arch/powerpc/boot/dts/sandpoint.dts b/arch/powerpc/boot/dts/sandpoint.dts
new file mode 100644
index 0000000..8f10122
--- /dev/null
+++ b/arch/powerpc/boot/dts/sandpoint.dts
@@ -0,0 +1,218 @@
+/*
+ * Device Tree Souce for Freescale Sandpoint
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2006 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * add flash parts, rtc, ??
+ *
+ * To build:
+ * dtc -I dts -O asm -o sandpoint.S -V 16 sandpoint.dts
+ * dtc -I dts -O dtb -o sandpoint.dtb -V 16 sandpoint.dts
+ */
+
+/ {
+ linux,phandle = <1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Sandpoint X3";
+ compatible = "Sandpoint";
+
+ cpus {
+ linux,phandle = <2000>;
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,603e { /* Really 75x, 74xx, 824x */
+ linux,phandle = <2100>;
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <0>; /* Set by bootwrapper */
+ timebase-frequency = <0>; /* Set by bootwrapper */
+ /* Following required by dtc but not used */
+ i-cache-line-size = <0>;
+ d-cache-line-size = <0>;
+ i-cache-size = <0>;
+ d-cache-size = <0>;
+ };
+ };
+
+ memory {
+ linux,phandle = <3000>;
+ device_type = "memory";
+ reg = <00000000 00000000>; /* Set by bootwrapper */
+ };
+
+ soc10x@fc000000 { /* Freescale/Tundra MPC10x */
+ linux,phandle = <4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "mpc10x";
+ store-gathering = <0>; /* 0 == off, !0 == on */
+ clock-frequency = <0>; /* Set by bootwrapper */
+ reg = <fc000000 00100000>;
+ ranges = <80000000 80000000 70000000 /* pci mem space */
+ fc000000 fc000000 00100000 /* EUMB */
+ fe000000 fe000000 00c00000 /* pci i/o space */
+ fec00000 fec00000 00300000 /* pci cfg regs */
+ fef00000 fef00000 00100000>; /* pci iack */
+
+ dma@fc001100 {
+ linux,phandle = <4100>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "dma";
+ compatible = "fsl-dma";
+ clock-frequency = <0>;
+ reg = <fc001100 24>;
+ interrupts = <33 0>;
+ interrupt-parent = <4400>;
+ };
+
+ dma@fc001200 {
+ linux,phandle = <4200>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "dma";
+ compatible = "fsl-dma";
+ clock-frequency = <0>;
+ reg = <fc001200 24>;
+ interrupts = <34 0>;
+ interrupt-parent = <4400>;
+ };
+
+ i2c@fc003000 {
+ linux,phandle = <4300>;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ clock-frequency = <0>;
+ reg = <fc003000 1000>;
+ interrupts = <32 0>;
+ interrupt-parent = <4400>;
+ };
+
+ pic@fc040000 { /* EPIC */
+ linux,phandle = <4400>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <fc040000 40000>;
+ clock-frequency = <0>;
+ clock-ratio = <7>;
+ serial-mode = <1>;
+ built-in;
+ };
+
+ pci@fec00000 {
+ linux,phandle = <4500>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "mpc10x-pci";
+ reg = <fec00000 00400000>;
+ ranges = <01000000 0 0 fe000000 0 00c00000
+ 02000000 0 80000000 80000000 0 70000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <7f28155>;
+ interrupt-pci-iack = <fef00000>; /* New - PCI IACK */
+ interrupt-parent = <4400>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0b - i8259 on Windbond */
+ 5800 0 0 1 4400 0 1
+ 5800 0 0 2 4400 0 1
+ 5800 0 0 3 4400 0 1
+ 5800 0 0 4 4400 0 1
+ /* IDSEL 0x0d - PCI slot 1 */
+ 6800 0 0 1 4400 2 1
+ 6800 0 0 2 4400 5 1
+ 6800 0 0 3 4400 4 1
+ 6800 0 0 4 4400 3 1
+ /* IDSEL 0x0e - PCI slot 2 */
+ 7000 0 0 1 4400 3 1
+ 7000 0 0 2 4400 2 1
+ 7000 0 0 3 4400 5 1
+ 7000 0 0 4 4400 4 1
+ /* IDSEL 0x0f - PCI slot 3 */
+ 7800 0 0 1 4400 4 1
+ 7800 0 0 2 4400 3 1
+ 7800 0 0 3 4400 2 1
+ 7800 0 0 4 4400 5 1
+ /* IDSEL 0x10 - PCI slot 4 */
+ 8000 0 0 1 4400 5 1
+ 8000 0 0 2 4400 4 1
+ 8000 0 0 3 4400 3 1
+ 8000 0 0 4 4400 2 1
+ >;
+
+ isa {
+ linux,phandle = <4510>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "isa";
+ compatible = "isa";
+ ranges = <1 0 01000000 0 0 00800000>;
+ interrupt-parent = <4511>;
+
+ i8259@4d0 {
+ linux,phandle = <4511>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "interrupt-controller";
+ compatible = "chrp,iic";
+ interrupt-controller;
+ clock-frequency = <0>;
+ built-in;
+ interrupt-parent = <4400>;
+ interrupts = <0 0>;
+ };
+
+ serial@3f8 {
+ linux,phandle = <4512>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <1 3f8 8>;
+ virtual-reg = <fe0003f8>;
+ clock-frequency = <1c2000>;
+ current-speed = <2580>;
+ interrupts = <4 0>;
+ };
+
+ serial@2f8 {
+ linux,phandle = <4513>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <1 2f8 8>;
+ virtual-reg = <fe0002f8>;
+ clock-frequency = <1c2000>;
+ current-speed = <2580>;
+ interrupts = <3 0>;
+ };
+ };
+ };
+ };
+
+ chosen {
+ linux,phandle = <5000>;
+ linux,platform = <1>;
+ bootargs = "ip=on";
+ linux,stdout-path = "/soc10x/pci/isa/serial@3f8";
+ interrupt-controller = <4400>;
+ };
+};
diff --git a/arch/powerpc/boot/mpc10x.c b/arch/powerpc/boot/mpc10x.c
new file mode 100644
index 0000000..3e4de93
--- /dev/null
+++ b/arch/powerpc/boot/mpc10x.c
@@ -0,0 +1,109 @@
+/*
+ * Freescale mpc10[67] & mpc824[015] specific code.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+
+/* Map B (CHRP Map) Defines */
+#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
+#define MPC10X_MAPB_CNFG_DATA 0xfee00000
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
+
+#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+
+/* Indirect PCI config space access routines */
+static inline void
+pci_indirect_read_config_byte(u32 *cfg_addr, u32 *cfg_data, int devfn,
+ int offset, u8 *val)
+{
+ out_be32(cfg_addr,
+ ((offset & 0xfc) << 24) | (devfn << 16) | (0 << 8) | 0x80);
+ *val = in_8((u8 *)(cfg_data + (offset & 3)));
+ return;
+}
+
+static inline void
+pci_indirect_read_config_dword(u32 *cfg_addr, u32 *cfg_data, int devfn,
+ int offset, u32 *val)
+{
+ out_be32(cfg_addr,
+ ((offset & 0xfc) << 24) | (devfn << 16) | (0 << 8) | 0x80);
+ *val = in_le32(cfg_data + (offset & 3));
+ return;
+}
+
+/*
+ * Read the memory controller registers to determine the amount of memory in
+ * the system. This assumes that the firmware has correctly set up the memory
+ * controller registers.
+ * Assume memory map B (CHRP).
+ */
+u32
+mpc10x_get_mem_size(void)
+{
+ u32 *config_addr, *config_data, val;
+ u32 start, end, total, offset, i;
+ u8 bank_enables;
+
+ config_addr = (u32 *)MPC10X_MAPB_CNFG_ADDR;
+ config_data = (u32 *)MPC10X_MAPB_CNFG_DATA;
+
+ pci_indirect_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
+ MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
+
+ total = 0;
+
+ for (i=0; i<8; i++) {
+ if (bank_enables & (1 << i)) {
+ offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ start = (val >> ((i & 3) << 3)) & 0xff;
+
+ offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ val = (val >> ((i & 3) << 3)) & 0x03;
+ start = (val << 28) | (start << 20);
+
+ offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ end = (val >> ((i & 3) << 3)) & 0xff;
+
+ offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
+ pci_indirect_read_config_dword(config_addr, config_data,
+ PCI_DEVFN(0,0), offset, &val);
+ val = (val >> ((i & 3) << 3)) & 0x03;
+ end = (val << 28) | (end << 20) | 0xfffff;
+
+ total += (end - start + 1);
+ }
+ }
+
+ return total;
+}
diff --git a/arch/powerpc/boot/sandpoint.c b/arch/powerpc/boot/sandpoint.c
new file mode 100644
index 0000000..496cafd
--- /dev/null
+++ b/arch/powerpc/boot/sandpoint.c
@@ -0,0 +1,162 @@
+/*
+ * Sandpoint specific fixups.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2006 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+extern char _end[];
+
+#define KB 1024
+#define MB (1024*1024)
+
+#define CPU_824X 0
+#define CPU_7XX 1
+#define CPU_7457 2
+#define CPU_NUM 3
+
+static u32 cpu_pll[CPU_NUM][32] = {
+ [CPU_824X] = { /* 824x */
+ 5, 6, 9, 4, 4, 5, 2, 6, 6, 4, 9, 6, 5, 7, 6, 7,
+ 4, 5, 4, 6, 7, 8, 8, 4, 6, 5, 8, 6, 6, 5, 7, 0
+ },
+ [CPU_7XX] = { /* 750/755 */
+ 0, 15, 14, 2, 4, 13, 20, 9, 6, 11, 8, 10, 16, 12, 7, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+
+ },
+ [CPU_7457] = { /* 7457 */
+ 23, 34, 15, 30, 14, 36, 2, 40, 4, 42, 13, 26, 17, 48, 19, 18,
+ 6, 21, 11, 22, 8, 20, 10, 24, 16, 28, 12, 32, 27, 56, 0, 25
+ }
+};
+
+static struct processor_info {
+ u32 pvr;
+ u32 mask;
+ u32 bus_freq;
+ u32 hid1_shift;
+ u32 hid1_mask;
+ u32 pll_tbl_idx;
+ u32 max_mem; /* DINK still sets up mem ctlr wrong */
+} processor_info_tbl[] = { /* From cputable -- MHz are only guesses */
+ /* 824x */
+ { 0x00810000, 0x7fff0000, 100000000, 27, 0x1f, CPU_824X, 0x08000000 },
+ /* 750 */
+ { 0x00084202, 0xffffffff, 100000000, 28, 0xf, CPU_7XX, 0x02000000 },
+ /* 745/755 */
+ { 0x00083000, 0xfffff000, 100000000, 28, 0xf, CPU_7XX, 0x02000000 },
+ /* 7447/7457 Rev 1.0 */
+ { 0x80020100, 0xffffffff, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447/7457 Rev 1.1 */
+ { 0x80020101, 0xffffffff, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447/7457 Rev 1.2 & up*/
+ { 0x80020000, 0xffff0000, 100000000, 12, 0x1f, CPU_7457, 0x04000000 },
+ /* 7447A */
+ { 0x80030000, 0xffff0000, 100000000, 12, 0x1f, CPU_7457, 0x80000000 },
+};
+
+static struct processor_info *get_processor_info(u32 pvr)
+{
+ struct processor_info *pit = processor_info_tbl;
+ u32 i;
+
+ for (i=0; i<ARRAY_SIZE(processor_info_tbl); i++, pit++)
+ if (pit->pvr == (pvr & pit->mask))
+ return pit;
+ return NULL;
+}
+
+#define __stringify_1(x) #x
+#define __stringify(x) __stringify_1(x)
+
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define mfspr(rn) ({unsigned long rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+
+static void sandpoint_fixups(void)
+{
+ u32 i, v[2], hid1, max_mem = 0xffffffff;
+ void *devp;
+ struct processor_info *pit;
+ extern u32 mpc10x_get_mem_size(void);
+
+ /* Update cpu's clock-frequency & timebase-frequency in fdt */
+ if ((pit = get_processor_info(mfspr(SPRN_PVR)))) {
+ if ((devp = finddevice("/cpus/PowerPC,603e"))) {
+ max_mem = pit->max_mem;
+
+ hid1 = (mfspr(SPRN_HID1) >> pit->hid1_shift)
+ & pit->hid1_mask;
+ v[0] = pit->bus_freq
+ * cpu_pll[pit->pll_tbl_idx][hid1]/2;
+ setprop(devp, "clock-frequency", v, sizeof(v[0]));
+
+ v[0] = pit->bus_freq / 4;
+ setprop(devp, "timebase-frequency", v, sizeof(v[0]));
+ }
+ if ((devp = finddevice("/soc10x@fc000000")))
+ setprop(devp, "clock-frequency", &pit->bus_freq,
+ sizeof(u32));
+ }
+
+ /* Get the RAM size from the memory controller & update fdt */
+ if ((devp = finddevice("/memory"))) {
+ i = mpc10x_get_mem_size();
+ v[0] = 0;
+ v[1] = min(i, max_mem);
+ setprop(devp, "reg", v, sizeof(v));
+ }
+
+ /* XXXX stuff from platforms/.../sandpoint.c should be here */
+}
+
+static void sandpoint_reset(void)
+{
+ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+ _nmask_and_or_msr(0, (1<<6)); /* Set exception prefix high - firmware */
+
+ /* Reset system via Port 92 */
+ out_8((volatile unsigned char *)0xfe000092, 0x00);
+ out_8((volatile unsigned char *)0xfe000092, 0x01);
+
+ for(;;); /* Spin until reset happens */
+}
+
+#define HEAP_SIZE (16*MB)
+
+int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end)
+{
+ int dt_size = dt_blob_end - dt_blob_start;
+
+ if (dt_size <= 0) /* No fdt */
+ goto err_out;
+
+ if ((unsigned)simple_alloc_init(_end, HEAP_SIZE, 2*KB, 16) > (32*MB))
+ goto err_out;
+
+ if (ft_init(dt_blob_start, dt_size, 16))
+ goto err_out;
+
+ platform_ops.fixups = sandpoint_fixups;
+ platform_ops.exit = sandpoint_reset;
+
+ return serial_console_init();
+
+err_out:
+ return -1;
+}
diff --git a/arch/powerpc/configs/sandpoint_defconfig b/arch/powerpc/configs/sandpoint_defconfig
new file mode 100644
index 0000000..6b24059
--- /dev/null
+++ b/arch/powerpc/configs/sandpoint_defconfig
@@ -0,0 +1,1144 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc1
+# Mon Oct 9 18:20:38 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+CONFIG_PPC_TODC=y
+# CONFIG_KATANA is not set
+# CONFIG_WILLOW is not set
+# CONFIG_CPCI690 is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_CHESTNUT is not set
+# CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
+# CONFIG_LOPEC is not set
+# CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
+# CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
+CONFIG_SANDPOINT=y
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_RADSTONE_PPC7D is not set
+# CONFIG_PAL4 is not set
+# CONFIG_GEMINI is not set
+# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
+# CONFIG_SBS8260 is not set
+# CONFIG_RPX8260 is not set
+# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_EV64360 is not set
+CONFIG_PPC_GEN550=y
+CONFIG_EPIC_SERIAL_MODE=y
+CONFIG_MPC10X_BRIDGE=y
+CONFIG_MPC10X_OPENPIC=y
+# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_SANDPOINT_ENABLE_UART1 is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_XIRTULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 234a861..e5ac829 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -69,7 +69,9 @@ config PRPMC800
config SANDPOINT
bool "Motorola-Sandpoint"
+ select MPIC
select PPC_I8259
+ select PPC_UDBG_16550
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index fa499fe..042b6ca 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -2,3 +2,4 @@ #
# Makefile for the 6xx/7xx/7xxxx linux kernel.
#
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
+obj-$(CONFIG_SANDPOINT) += sandpoint.o
diff --git a/arch/powerpc/platforms/embedded6xx/sandpoint.c b/arch/powerpc/platforms/embedded6xx/sandpoint.c
new file mode 100644
index 0000000..315cbe7
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/sandpoint.c
@@ -0,0 +1,384 @@
+/*
+ * Board setup routines for the Freescale Sandpoint Test Platform.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * This file adds support for the Freescale Sandpoint Test Platform.
+ * These boards have a PPMC slot for the processor so any combination
+ * of cpu and host bridge can be attached. This port is for an 8240 PPMC
+ * module from Freescale and other closely related cpu/host bridge
+ * combinations (e.g., 750/755/7400 with MPC107 host bridge).
+ * The sandpoint itself has a Windbond 83c553 (PCI-ISA bridge, 2 DMA ctlrs, 2
+ * cascaded 8259 interrupt ctlrs, 8254 Timer/Counter, and an IDE ctlr), a
+ * National 87308 (RTC, 2 UARTs, Keyboard & mouse ctlrs, and a floppy ctlr),
+ * and 4 PCI slots (only 2 of which are usable; the other 2 are keyed for 3.3V
+ * but are really 5V).
+ *
+ * The firmware on the sandpoint is called DINK (not my acronym :). This port
+ * depends on DINK to do some basic initialization (e.g., initialize the memory
+ * ctlr) and to ensure that the processor is using MAP B (CHRP map).
+ *
+ * Since Freescale listened to our suggestions for improvement, we now have
+ * the Sandpoint X3 board. All of the PCI slots are available, it uses
+ * the serial interrupt interface (just a hardware thing we need to
+ * configure properly).
+ *
+ * Use the default X3 switch settings. The interrupts are then:
+ * EPIC Source
+ * 0 SIOINT (8259, active low)
+ * 1 PCI #1
+ * 2 PCI #2
+ * 3 PCI #3
+ * 4 PCI #4
+ * 7 Winbond INTC (IDE interrupt)
+ * 8 Winbond INTD (IDE interrupt)
+ *
+ *
+ * Freescale has finally released a version of DINK32 that correctly
+ * (seemingly) initalizes the memory controller correctly, regardless
+ * of the amount of memory in the system. Once a method of determining
+ * what version of DINK initializes the system for us, if applicable, is
+ * found, we can hopefully stop hardcoding 32MB of RAM.
+ */
+
+#include <linux/initrd.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/root_dev.h>
+
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/udbg.h>
+#include <asm/todc.h>
+#include <asm/mpic.h>
+#include <asm/todc.h>
+
+/*
+ * Interrupt setup and service. Interrrupts on the Sandpoint come
+ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
+ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
+ * IDE is on EPIC 7 and 8.
+ */
+static void sandpoint_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ desc->chip->eoi(irq);
+}
+
+static void __init
+sandpoint_init_irq(void)
+{
+ struct mpic *mpic;
+ struct device_node *dnp, *cascade_node = NULL;
+ void *prop;
+ int size;
+ unsigned int cascade_irq;
+ phys_addr_t paddr;
+
+ dnp = of_find_node_by_type(NULL, "open-pic");
+ if (dnp == NULL)
+ return;
+
+ prop = (struct device_node *)get_property(dnp, "reg", &size);
+ paddr = (phys_addr_t)of_translate_address(dnp, prop);
+
+ mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY, 0, 0, " EPIC ");
+
+ prop = (struct device_node *)get_property(dnp, "clock-ratio", &size);
+ if (prop != NULL)
+ mpic_set_clk_ratio(mpic, *(u32 *)prop);
+
+ prop = (struct device_node *)get_property(dnp, "serial-mode", &size);
+ if (prop != NULL)
+ mpic_set_serial_int(mpic, *(u32 *)prop);
+
+ mpic_assign_isu(mpic, 0, paddr + 0x10200);
+ mpic_init(mpic);
+
+ for_each_node_by_type(dnp, "interrupt-controller")
+ if (device_is_compatible(dnp, "chrp,iic")) {
+ cascade_node = dnp;
+ break;
+ }
+
+ if (cascade_node == NULL)
+ return;
+
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+
+ if (cascade_irq == NO_IRQ)
+ return;
+
+ i8259_init(cascade_node, 0);
+ set_irq_chained_handler(cascade_irq, sandpoint_8259_cascade);
+}
+
+static int __init
+add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ int *bus_range;
+
+ printk("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (hose == NULL)
+ return -ENOMEM;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+ return 0;
+}
+
+/*
+ * Freescale Sandpoint interrupt routing.
+ */
+static inline int
+x3_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { 0, 0, 0, 0 }, /* IDSEL 11 - i8259 on Winbond */
+ { 0, 0, 0, 0 }, /* IDSEL 12 - unused */
+ { 2, 5, 4, 3 }, /* IDSEL 13 - PCI slot 1 */
+ { 3, 2, 5, 4 }, /* IDSEL 14 - PCI slot 2 */
+ { 4, 3, 2, 5 }, /* IDSEL 15 - PCI slot 3 */
+ { 5, 4, 3, 2 }, /* IDSEL 16 - PCI slot 4 */
+ };
+
+ const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+#ifdef CONFIG_PPC_TODC
+TODC_ALLOC()
+#endif
+
+static void __init
+sandpoint_setup_arch(void)
+{
+ struct device_node *dnp;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ for (dnp = NULL; (dnp=of_find_node_by_type(dnp,"pci")) != NULL;)
+ add_bridge(dnp);
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = x3_map_irq;
+
+ printk(KERN_INFO "Port by MontaVista Software, Inc. <source@mvista.com>\n");
+
+#ifdef CONFIG_PPC_TODC
+ TODC_INIT(TODC_TYPE_PC97307, 0x70, 0x00, 0x71, 8);
+
+ ppc_md.nvram_read_val = todc_mc146818_read_val;
+ ppc_md.nvram_write_val = todc_mc146818_write_val;
+
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+#endif
+
+ /* DINK32 12.3 and below do not correctly enable any caches.
+ * We will do this now with good known values. Future versions
+ * of DINK32 are supposed to get this correct.
+ */
+ if (cpu_has_feature(CPU_FTR_SPEC7450))
+ /* 745x is different. We only want to pass along enable. */
+ _set_L2CR(L2CR_L2E);
+ else if (cpu_has_feature(CPU_FTR_L2CR))
+ /* All modules have 1MB of L2. We also assume that an
+ * L2 divisor of 3 will work.
+ */
+ _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
+ | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
+#if 0
+ /* Untested right now. */
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ /* Magic value. */
+ _set_L3CR(0x8f032000);
+ }
+#endif
+}
+
+static void
+sandpoint_restart(char *cmd)
+{
+ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+ local_irq_disable();
+ _nmask_and_or_msr(0, MSR_IP); /* Set exception prefix high - firmware */
+
+ /* Reset system via Port 92 */
+ outb(0x00, 0x92);
+ outb(0x01, 0x92);
+
+ for(;;); /* Spin until reset happens */
+}
+
+static void
+sandpoint_power_off(void)
+{
+ local_irq_disable();
+ for(;;); /* No way to shut power off with software */
+ /* NOTREACHED */
+}
+
+static void
+sandpoint_halt(void)
+{
+ sandpoint_power_off();
+ /* NOTREACHED */
+}
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+/*
+ * IDE support.
+ */
+static int sandpoint_ide_ports_known = 0;
+static unsigned long sandpoint_ide_regbase[MAX_HWIFS];
+static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS];
+static unsigned long sandpoint_idedma_regbase;
+
+static void
+sandpoint_ide_probe(void)
+{
+ struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
+ PCI_DEVICE_ID_WINBOND_82C105, NULL);
+
+ if (pdev) {
+ sandpoint_ide_regbase[0]=pdev->resource[0].start;
+ sandpoint_ide_regbase[1]=pdev->resource[2].start;
+ sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
+ sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
+ sandpoint_idedma_regbase=pdev->resource[4].start;
+ pci_dev_put(pdev);
+ }
+
+ sandpoint_ide_ports_known = 1;
+}
+
+static unsigned long
+sandpoint_ide_default_io_base(int index)
+{
+ if (sandpoint_ide_ports_known == 0)
+ sandpoint_ide_probe();
+
+ return sandpoint_ide_regbase[index];
+}
+
+static void __init
+sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+ unsigned long ctrl_port, int *irq)
+{
+ unsigned long reg = data_port;
+ uint alt_status_base;
+ int i;
+
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+ hw->io_ports[i] = reg++;
+ }
+
+ if (data_port == sandpoint_ide_regbase[0]) {
+ alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
+ hw->irq = 14;
+ }
+ else if (data_port == sandpoint_ide_regbase[1]) {
+ alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
+ hw->irq = 15;
+ }
+ else {
+ alt_status_base = 0;
+ hw->irq = 0;
+ }
+
+ if (ctrl_port) {
+ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+ } else {
+ hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
+ }
+
+ if (irq != NULL) {
+ *irq = hw->irq;
+ }
+}
+
+static int __init
+sandpoint_ide_init(void)
+{
+ /* doesn't find hda without this */
+ ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
+ /* get error msgs without this */
+ ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
+ return 0;
+}
+arch_initcall(sandpoint_ide_init);
+#endif
+
+void __init
+sandpoint_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+#define PLATFORM_NAME "Freescale Sandpoint"
+
+static int __init
+sandpoint_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "Sandpoint"))
+ return 1;
+ return 0;
+}
+
+define_machine(sandpoint) {
+ .name = PLATFORM_NAME,
+ .probe = sandpoint_probe,
+ .setup_arch = sandpoint_setup_arch,
+ .init_IRQ = sandpoint_init_irq,
+ .pcibios_fixup = sandpoint_pcibios_fixup,
+ .get_irq = mpic_get_irq,
+ .restart = sandpoint_restart,
+ .power_off = sandpoint_power_off,
+ .halt = sandpoint_halt,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
^ permalink raw reply related
* [PATCH 4/4] powerpc: Add non-OF serial console support
From: Mark A. Greer @ 2006-10-10 6:13 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Add serial console support for non-OF systems. There is a generic serial
console layer which calls a serial console driver. Included is the serial
console driver for the ns16550 class of uarts. Necessary support routines
are added as well.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
Makefile | 4 -
io.h | 53 +++++++++++++++++++++++
ns16550.c | 76 +++++++++++++++++++++++++++++++++
serial.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
util.S | 101 ++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 374 insertions(+), 2 deletions(-)
---
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index d4042ad..9aad574 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,8 +40,8 @@ zliblinuxheader := zlib.h zconf.h zutil.
$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
$(addprefix $(obj)/,$(zlibheader))
-src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c div64.S \
- $(zlib)
+src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c ns16550.c \
+ serial.c div64.S util.S $(zlib)
src-plat := of.c
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h
new file mode 100644
index 0000000..32974ed
--- /dev/null
+++ b/arch/powerpc/boot/io.h
@@ -0,0 +1,53 @@
+#ifndef _IO_H
+#define __IO_H
+/*
+ * Low-level I/O routines.
+ *
+ * Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
+ */
+static inline int in_8(const volatile unsigned char *addr)
+{
+ int ret;
+
+ __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
+ : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+static inline void out_8(volatile unsigned char *addr, int val)
+{
+ __asm__ __volatile__("stb%U0%X0 %1,%0; sync"
+ : "=m" (*addr) : "r" (val));
+}
+
+static inline unsigned in_le32(const volatile unsigned *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync"
+ : "=r" (ret) : "r" (addr), "m" (*addr));
+ return ret;
+}
+
+static inline unsigned in_be32(const volatile unsigned *addr)
+{
+ unsigned ret;
+
+ __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
+ : "=r" (ret) : "m" (*addr));
+ return ret;
+}
+
+static inline void out_le32(volatile unsigned *addr, int val)
+{
+ __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr)
+ : "r" (val), "r" (addr));
+}
+
+static inline void out_be32(volatile unsigned *addr, int val)
+{
+ __asm__ __volatile__("stw%U0%X0 %1,%0; sync"
+ : "=m" (*addr) : "r" (val));
+}
+
+#endif /* _IO_H */
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
new file mode 100644
index 0000000..e066942
--- /dev/null
+++ b/arch/powerpc/boot/ns16550.c
@@ -0,0 +1,76 @@
+/*
+ * 16550 serial console support.
+ *
+ * Original copied from <file:arch/ppc/boot/common/ns16550.c>
+ * (which had no copyright)
+ * Modifications: 2006 (c) MontaVista Software, Inc.
+ *
+ * Modified by: Mark A. Greer <mgreer@mvista.com>
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+#define UART_DLL 0 /* Out: Divisor Latch Low */
+#define UART_DLM 1 /* Out: Divisor Latch High */
+#define UART_FCR 2 /* Out: FIFO Control Register */
+#define UART_LCR 3 /* Out: Line Control Register */
+#define UART_MCR 4 /* Out: Modem Control Register */
+#define UART_LSR 5 /* In: Line Status Register */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_DR 0x01 /* Receiver data ready */
+#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_SCR 7 /* I/O: Scratch Register */
+
+static unsigned char *reg_base;
+static u8 reg_shift;
+
+static int ns16550_open(void)
+{
+ out_8(reg_base + (UART_FCR << reg_shift), 0x06);
+ return 0;
+}
+
+static void ns16550_putc(unsigned char c)
+{
+ while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_THRE) == 0);
+ out_8(reg_base, c);
+}
+
+static unsigned char ns16550_getc(void)
+{
+ while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) == 0);
+ return in_8(reg_base);
+}
+
+static u8 ns16550_tstc(void)
+{
+ return ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) != 0);
+}
+
+int ns16550_console_init(void *devp, struct serial_console_data *scdp)
+{
+ u32 reg[2];
+ int n;
+
+ n = getprop(devp, "virtual-reg", ®, sizeof(reg)) / 4;
+ if (n < 1)
+ return -1;
+ reg_base = (unsigned char *)((n == 1) ? reg[0] : reg[0] | reg[1]);
+
+ if (getprop(devp, "reg_shift", ®_shift, sizeof(reg_shift))
+ != sizeof(reg_shift))
+ reg_shift = 0;
+
+ scdp->open = ns16550_open;
+ scdp->putc = ns16550_putc;
+ scdp->getc = ns16550_getc;
+ scdp->tstc = ns16550_tstc;
+ scdp->close = NULL;
+
+ return 0;
+}
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
new file mode 100644
index 0000000..e8de4cf
--- /dev/null
+++ b/arch/powerpc/boot/serial.c
@@ -0,0 +1,142 @@
+/*
+ * Generic serial console support
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * Code in serial_edit_cmdline() copied from <file:arch/ppc/boot/simple/misc.c>
+ * and was written by Matt Porter <mporter@kernel.crashing.org>.
+ *
+ * 2001,2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+extern void udelay(long delay);
+
+static int serial_open(void)
+{
+ struct serial_console_data *scdp = console_ops.data;
+ return scdp->open();
+}
+
+static void serial_write(char *buf, int len)
+{
+ struct serial_console_data *scdp = console_ops.data;
+
+ while (*buf != '\0')
+ scdp->putc(*buf++);
+}
+
+static void serial_edit_cmdline(char *buf, int len)
+{
+ int timer = 0, count;
+ char ch, *cp;
+ struct serial_console_data *scdp = console_ops.data;
+
+ cp = buf;
+ count = strlen(buf);
+ cp = &buf[count];
+ count++;
+
+ while (timer++ < 5*1000) {
+ if (scdp->tstc()) {
+ while (((ch = scdp->getc()) != '\n') && (ch != '\r')) {
+ /* Test for backspace/delete */
+ if ((ch == '\b') || (ch == '\177')) {
+ if (cp != buf) {
+ cp--;
+ count--;
+ printf("\b \b");
+ }
+ /* Test for ^x/^u (and wipe the line) */
+ } else if ((ch == '\030') || (ch == '\025')) {
+ while (cp != buf) {
+ cp--;
+ count--;
+ printf("\b \b");
+ }
+ } else if (count < len) {
+ *cp++ = ch;
+ count++;
+ scdp->putc(ch);
+ }
+ }
+ break; /* Exit 'timer' loop */
+ }
+ udelay(1000); /* 1 msec */
+ }
+ *cp = 0;
+}
+
+static void serial_close(void)
+{
+ struct serial_console_data *scdp = console_ops.data;
+
+ if (scdp->close)
+ scdp->close();
+}
+
+static void *serial_get_stdout_devp(void)
+{
+ void *devp;
+ char devtype[MAX_PROP_LEN];
+ char path[MAX_PATH_LEN];
+
+ devp = finddevice("/chosen");
+ if (devp == NULL)
+ goto err_out;
+
+ if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
+ devp = finddevice(path);
+ if (devp == NULL)
+ goto err_out;
+
+ if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+ && !strcmp(devtype, "serial"))
+ return devp;
+ }
+err_out:
+ return NULL;
+}
+
+static struct serial_console_data serial_cd;
+
+/* Node's "compatible" property determines which serial driver to use */
+int serial_console_init(void)
+{
+ void *devp;
+ int rc = -1;
+ char compat[MAX_PROP_LEN];
+
+ devp = serial_get_stdout_devp();
+ if (devp == NULL)
+ goto err_out;
+
+ if (getprop(devp, "compatible", compat, sizeof(compat)) < 0)
+ goto err_out;
+
+ if (!strcmp(compat, "ns16550"))
+ rc = ns16550_console_init(devp, &serial_cd);
+
+ /* Add other serial console driver calls here */
+
+ if (!rc) {
+ console_ops.open = serial_open;
+ console_ops.write = serial_write;
+ console_ops.edit_cmdline = serial_edit_cmdline;
+ console_ops.close = serial_close;
+ console_ops.data = &serial_cd;
+
+ return 0;
+ }
+err_out:
+ return -1;
+}
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
new file mode 100644
index 0000000..b8e1c23
--- /dev/null
+++ b/arch/powerpc/boot/util.S
@@ -0,0 +1,101 @@
+/*
+ * Copied from <file:arch/powerpc/kernel/misc_32.S>
+ *
+ * This file contains miscellaneous low-level functions.
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * kexec bits:
+ * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include "ppc_asm.h"
+
+#define SPRN_PVR 0x11F /* Processor Version Register */
+
+ .text
+/*
+ * complement mask on the msr then "or" some values on.
+ * _nmask_and_or_msr(nmask, value_to_or)
+ */
+ .globl _nmask_and_or_msr
+_nmask_and_or_msr:
+ mfmsr r0 /* Get current msr */
+ andc r0,r0,r3 /* And off the bits set in r3 (first parm) */
+ or r0,r0,r4 /* Or on the bits in r4 (second parm) */
+ SYNC /* Some chip revs have problems here... */
+ mtmsr r0 /* Update machine state */
+ isync
+ blr /* Done */
+
+/* udelay (on non-601 processors) needs to know the period of the
+ * timebase in nanoseconds. This used to be hardcoded to be 60ns
+ * (period of 66MHz/4). Now a variable is used that is initialized to
+ * 60 for backward compatibility, but it can be overridden as necessary
+ * with code something like this:
+ * extern unsigned long timebase_period_ns;
+ * timebase_period_ns = 1000000000 / bd->bi_tbfreq;
+ */
+ .data
+ .globl timebase_period_ns
+timebase_period_ns:
+ .long 60
+
+ .text
+/*
+ * Delay for a number of microseconds
+ */
+ .globl udelay
+udelay:
+ mfspr r4,SPRN_PVR
+ srwi r4,r4,16
+ cmpwi 0,r4,1 /* 601 ? */
+ bne .udelay_not_601
+00: li r0,86 /* Instructions / microsecond? */
+ mtctr r0
+10: addi r0,r0,0 /* NOP */
+ bdnz 10b
+ subic. r3,r3,1
+ bne 00b
+ blr
+
+.udelay_not_601:
+ mulli r4,r3,1000 /* nanoseconds */
+ /* Change r4 to be the number of ticks using:
+ * (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
+ * timebase_period_ns defaults to 60 (16.6MHz) */
+ mflr r5
+ bl 0f
+0: mflr r6
+ mtlr r5
+ lis r5,0b@ha
+ addi r5,r5,0b@l
+ subf r5,r5,r6 /* In case we're relocated */
+ addis r5,r5,timebase_period_ns@ha
+ lwz r5,timebase_period_ns@l(r5)
+ add r4,r4,r5
+ addi r4,r4,-1
+ divw r4,r4,r5 /* BUS ticks */
+1: mftbu r5
+ mftb r6
+ mftbu r7
+ cmpw 0,r5,r7
+ bne 1b /* Get [synced] base time */
+ addc r9,r6,r4 /* Compute end time */
+ addze r8,r5
+2: mftbu r5
+ cmpw 0,r5,r8
+ blt 2b
+ bgt 3f
+ mftb r6
+ cmpw 0,r6,r9
+ blt 2b
+3: blr
^ permalink raw reply related
* [PATCH 3/4] powerpc: Add simple memory allocator to bootwrapper
From: Mark A. Greer @ 2006-10-10 6:12 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Provide primitive malloc, free, and realloc functions for bootwrapper.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
Makefile | 2
simple_alloc.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 132 insertions(+), 1 deletion(-)
---
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9aad574..2def775 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -41,7 +41,7 @@ zliblinuxheader := zlib.h zconf.h zutil.
$(addprefix $(obj)/,$(zlibheader))
src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c ns16550.c \
- serial.c div64.S util.S $(zlib)
+ serial.c simple_alloc.c div64.S util.S $(zlib)
src-plat := of.c
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c
new file mode 100644
index 0000000..d746906
--- /dev/null
+++ b/arch/powerpc/boot/simple_alloc.c
@@ -0,0 +1,131 @@
+/*
+ * Implement primitive realloc(3) functionality.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2006 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stddef.h>
+#include "types.h"
+#include "page.h"
+#include "string.h"
+#include "ops.h"
+
+#define ENTRY_BEEN_USED 0x01
+#define ENTRY_IN_USE 0x02
+
+static struct alloc_info {
+ u32 flags;
+ u32 base;
+ u32 size;
+} *alloc_tbl;
+
+static u32 tbl_entries;
+static u32 alloc_min;
+static u32 space_left;
+
+/*
+ * First time an entry is used, its base and size are set.
+ * An entry can be freed and re-malloc'd but its base & size don't change.
+ * Should be smart enough for needs of bootwrapper.
+ */
+static void *simple_malloc(u32 size)
+{
+ u32 i;
+ struct alloc_info *p = alloc_tbl, *prevp = NULL;
+
+ if (size == 0)
+ goto err_out;
+
+ size = _ALIGN_UP(size, alloc_min);
+
+ for (i=0; i<tbl_entries; i++) {
+ if (!(p->flags & ENTRY_BEEN_USED)) { /* never been used */
+ if (size <= space_left) {
+ if (i > 0)
+ p->base = prevp->base + prevp->size;
+ p->size = size;
+ p->flags = ENTRY_BEEN_USED | ENTRY_IN_USE;
+ space_left -= size;
+ return (void *)p->base;
+ }
+ goto err_out; /* not enough space left */
+ }
+ /* reuse an entry keeping same base & size */
+ else if (!(p->flags & ENTRY_IN_USE) && (size <= p->size)) {
+ p->flags |= ENTRY_IN_USE;
+ return (void *)p->base;
+ }
+ prevp = p++;
+ }
+err_out:
+ return NULL;
+}
+
+static void simple_free(void *ptr)
+{
+ u32 i;
+ struct alloc_info *p = alloc_tbl;
+
+ for (i=0; i<tbl_entries; i++,p++) {
+ if (!(p->flags & ENTRY_BEEN_USED))
+ break;
+ else if ((p->flags & ENTRY_IN_USE) && (p->base == (u32)ptr)) {
+ p->flags &= ~ENTRY_IN_USE;
+ break;
+ }
+ }
+}
+
+/*
+ * Change size of area pointed to by 'ptr' to 'size'.
+ * If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free().
+ * 'ptr' must be NULL or a value previously returned by simple_realloc().
+ */
+static void *simple_realloc(void *ptr, unsigned long size)
+{
+ if (size == 0) {
+ simple_free(ptr);
+ return NULL;
+ }
+ else if (ptr == NULL)
+ return simple_malloc(size);
+ else {
+ simple_free(ptr);
+ return simple_malloc(size);
+ }
+}
+
+/*
+ * Returns addr of first byte after heap so caller can see if it took
+ * too much space. If so, change args & try again.
+ */
+void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
+ u32 max_allocs)
+{
+ u32 heap_base, tbl_size;
+
+ heap_size = _ALIGN_UP(heap_size, granularity);
+ alloc_min = granularity;
+ tbl_entries = max_allocs;
+
+ tbl_size = tbl_entries * sizeof(struct alloc_info);
+
+ alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8);
+ memset(alloc_tbl, 0, tbl_size);
+
+ heap_base = _ALIGN_UP((u32)alloc_tbl + tbl_size, alloc_min);
+
+ alloc_tbl[0].base = heap_base;
+ space_left = heap_size;
+
+ platform_ops.malloc = simple_malloc;
+ platform_ops.free = simple_free;
+ platform_ops.realloc = simple_realloc;
+
+ return (void *)(heap_base + heap_size);
+}
^ permalink raw reply related
* [PATCH 2/4] powerpc: Add flatdevtree source
From: Mark A. Greer @ 2006-10-10 6:12 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Add the latest version of the flatdevtree code and corresponding glue.
A phandle table now tracks values returned by ft_find_device().
The value returned by ft_find_device() is a phandle which is really
an index into the phandle table. The phandle table contains the address
of the corresponding node. When the flat dt is edited/moved, the node
pointers in the phandle table are updated accordingly so no phandles kept
by the caller become stale.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
Makefile | 3
flatdevtree.c | 876 +++++++++++++++++++++++++++++++++++++++++++++++++++++
flatdevtree.h | 62 +++
flatdevtree_env.h | 47 ++
flatdevtree_misc.c | 56 +++
5 files changed, 1042 insertions(+), 2 deletions(-)
---
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 003520b..d4042ad 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,7 +40,8 @@ zliblinuxheader := zlib.h zconf.h zutil.
$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
$(addprefix $(obj)/,$(zlibheader))
-src-wlib := string.S stdio.c main.c div64.S $(zlib)
+src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c div64.S \
+ $(zlib)
src-plat := of.c
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c
new file mode 100644
index 0000000..0d24f50
--- /dev/null
+++ b/arch/powerpc/boot/flatdevtree.c
@@ -0,0 +1,876 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright Pantelis Antoniou 2006
+ * Copyright (C) IBM Corporation 2006
+ *
+ * Authors: Pantelis Antoniou <pantelis@embeddedalley.com>
+ * Hollis Blanchard <hollisb@us.ibm.com>
+ * Mark A. Greer <mgreer@mvista.com>
+ * Paul Mackerras <paulus@samba.org>
+ */
+
+#include <string.h>
+#include <stddef.h>
+#include "flatdevtree.h"
+#include "flatdevtree_env.h"
+
+#define _ALIGN(x, al) (((x) + (al) - 1) & ~((al) - 1))
+
+/* Routines for keeping node ptrs returned by ft_find_device current */
+/* First entry not used b/c it would return 0 and be taken as NULL/error */
+static void *ft_node_add(struct ft_cxt *cxt, char *node)
+{
+ unsigned int i;
+
+ for (i = 1; i < cxt->nodes_used; i++) /* already there? */
+ if (cxt->node_tbl[i] == node)
+ return (void *)i;
+
+ if (cxt->nodes_used < cxt->node_max) {
+ cxt->node_tbl[cxt->nodes_used] = node;
+ return (void *)cxt->nodes_used++;
+ }
+
+ return NULL;
+}
+
+static char *ft_node_ph2node(struct ft_cxt *cxt, const void *phandle)
+{
+ unsigned int i = (unsigned int)phandle;
+
+ if (i < cxt->nodes_used)
+ return cxt->node_tbl[i];
+ return NULL;
+}
+
+static void ft_node_update_before(struct ft_cxt *cxt, char *addr, int shift)
+{
+ unsigned int i;
+
+ if (shift == 0)
+ return;
+
+ for (i = 1; i < cxt->nodes_used; i++)
+ if (cxt->node_tbl[i] < addr)
+ cxt->node_tbl[i] += shift;
+}
+
+static void ft_node_update_after(struct ft_cxt *cxt, char *addr, int shift)
+{
+ unsigned int i;
+
+ if (shift == 0)
+ return;
+
+ for (i = 1; i < cxt->nodes_used; i++)
+ if (cxt->node_tbl[i] >= addr)
+ cxt->node_tbl[i] += shift;
+}
+
+/* Struct used to return info from ft_next() */
+struct ft_atom {
+ u32 tag;
+ const char *name;
+ void *data;
+ u32 size;
+};
+
+/* Set ptrs to current one's info; return addr of next one */
+static char *ft_next(struct ft_cxt *cxt, char *p, struct ft_atom *ret)
+{
+ u32 sz;
+
+ if (p >= cxt->rgn[FT_STRUCT].start + cxt->rgn[FT_STRUCT].size)
+ return NULL;
+
+ ret->tag = be32_to_cpu(*(u32 *) p);
+ p += 4;
+
+ switch (ret->tag) { /* Tag */
+ case OF_DT_BEGIN_NODE:
+ ret->name = p;
+ ret->data = (void *)(p - 4); /* start of node */
+ p += _ALIGN(strlen(p) + 1, 4);
+ break;
+ case OF_DT_PROP:
+ ret->size = sz = be32_to_cpu(*(u32 *) p);
+ ret->name = cxt->str_anchor + be32_to_cpu(*(u32 *) (p + 4));
+ ret->data = (void *)(p + 8);
+ p += 8 + _ALIGN(sz, 4);
+ break;
+ case OF_DT_END_NODE:
+ case OF_DT_NOP:
+ break;
+ case OF_DT_END:
+ default:
+ p = NULL;
+ break;
+ }
+
+ return p;
+}
+
+#define HDR_SIZE _ALIGN(sizeof(struct boot_param_header), 8)
+#define EXPAND_INCR 1024 /* alloc this much extra when expanding */
+
+/* See if the regions are in the standard order and non-overlapping */
+static int ft_ordered(struct ft_cxt *cxt)
+{
+ char *p = (char *)cxt->bph + HDR_SIZE;
+ enum ft_rgn_id r;
+
+ for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) {
+ if (p > cxt->rgn[r].start)
+ return 0;
+ p = cxt->rgn[r].start + cxt->rgn[r].size;
+ }
+ return p <= (char *)cxt->bph + cxt->max_size;
+}
+
+/* Copy the tree to a newly-allocated region and put things in order */
+static int ft_reorder(struct ft_cxt *cxt, int nextra)
+{
+ unsigned long tot;
+ enum ft_rgn_id r;
+ char *p, *pend;
+ int stroff;
+
+ tot = HDR_SIZE + EXPAND_INCR;
+ for (r = FT_RSVMAP; r <= FT_STRINGS; ++r)
+ tot += cxt->rgn[r].size;
+ if (nextra > 0)
+ tot += nextra;
+ tot = _ALIGN(tot, 8);
+
+ if (!cxt->realloc)
+ return 0;
+ p = cxt->realloc(NULL, tot);
+ if (!p)
+ return 0;
+
+ memcpy(p, cxt->bph, sizeof(struct boot_param_header));
+ /* offsets get fixed up later */
+
+ cxt->bph = (struct boot_param_header *)p;
+ cxt->max_size = tot;
+ pend = p + tot;
+ p += HDR_SIZE;
+
+ memcpy(p, cxt->rgn[FT_RSVMAP].start, cxt->rgn[FT_RSVMAP].size);
+ cxt->rgn[FT_RSVMAP].start = p;
+ p += cxt->rgn[FT_RSVMAP].size;
+
+ memcpy(p, cxt->rgn[FT_STRUCT].start, cxt->rgn[FT_STRUCT].size);
+ ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start,
+ p - cxt->rgn[FT_STRUCT].start);
+ cxt->rgn[FT_STRUCT].start = p;
+
+ p = pend - cxt->rgn[FT_STRINGS].size;
+ memcpy(p, cxt->rgn[FT_STRINGS].start, cxt->rgn[FT_STRINGS].size);
+ stroff = cxt->str_anchor - cxt->rgn[FT_STRINGS].start;
+ cxt->rgn[FT_STRINGS].start = p;
+ cxt->str_anchor = p + stroff;
+
+ cxt->isordered = 1;
+ return 1;
+}
+
+static inline char *prev_end(struct ft_cxt *cxt, enum ft_rgn_id r)
+{
+ if (r > FT_RSVMAP)
+ return cxt->rgn[r - 1].start + cxt->rgn[r - 1].size;
+ return (char *)cxt->bph + HDR_SIZE;
+}
+
+static inline char *next_start(struct ft_cxt *cxt, enum ft_rgn_id r)
+{
+ if (r < FT_STRINGS)
+ return cxt->rgn[r + 1].start;
+ return (char *)cxt->bph + cxt->max_size;
+}
+
+/*
+ * See if we can expand region rgn by nextra bytes by using up
+ * free space after or before the region.
+ */
+static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
+ int nextra)
+{
+ char *p = *pp;
+ char *rgn_start, *rgn_end;
+
+ rgn_start = cxt->rgn[rgn].start;
+ rgn_end = rgn_start + cxt->rgn[rgn].size;
+ if (nextra <= 0 || rgn_end + nextra <= next_start(cxt, rgn)) {
+ /* move following stuff */
+ if (p < rgn_end) {
+ if (nextra < 0)
+ memmove(p, p - nextra, rgn_end - p + nextra);
+ else
+ memmove(p + nextra, p, rgn_end - p);
+ if (rgn == FT_STRUCT)
+ ft_node_update_after(cxt, p, nextra);
+ }
+ cxt->rgn[rgn].size += nextra;
+ if (rgn == FT_STRINGS)
+ /* assumes strings only added at beginning */
+ cxt->str_anchor += nextra;
+ return 1;
+ }
+ if (prev_end(cxt, rgn) <= rgn_start - nextra) {
+ /* move preceding stuff */
+ if (p > rgn_start) {
+ memmove(rgn_start - nextra, rgn_start, p - rgn_start);
+ if (rgn == FT_STRUCT)
+ ft_node_update_before(cxt, p, -nextra);
+ }
+ *p -= nextra;
+ cxt->rgn[rgn].start -= nextra;
+ cxt->rgn[rgn].size += nextra;
+ return 1;
+ }
+ return 0;
+}
+
+static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
+ int nextra)
+{
+ unsigned long size, ssize, tot;
+ char *str, *next;
+ enum ft_rgn_id r;
+
+ if (!cxt->isordered && !ft_reorder(cxt, nextra))
+ return 0;
+ if (ft_shuffle(cxt, pp, rgn, nextra))
+ return 1;
+
+ /* See if there is space after the strings section */
+ ssize = cxt->rgn[FT_STRINGS].size;
+ if (cxt->rgn[FT_STRINGS].start + ssize
+ < (char *)cxt->bph + cxt->max_size) {
+ /* move strings up as far as possible */
+ str = (char *)cxt->bph + cxt->max_size - ssize;
+ cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start;
+ memmove(str, cxt->rgn[FT_STRINGS].start, ssize);
+ cxt->rgn[FT_STRINGS].start = str;
+ /* enough space now? */
+ if (rgn >= FT_STRUCT && ft_shuffle(cxt, pp, rgn, nextra))
+ return 1;
+ }
+
+ /* how much total free space is there following this region? */
+ tot = 0;
+ for (r = rgn; r < FT_STRINGS; ++r) {
+ char *r_end = cxt->rgn[r].start + cxt->rgn[r].size;
+ tot += next_start(cxt, rgn) - r_end;
+ }
+
+ /* cast is to shut gcc up; we know nextra >= 0 */
+ if (tot < (unsigned int)nextra) {
+ /* have to reallocate */
+ char *newp, *oldp, *new_start;
+ int shift;
+
+ if (!cxt->realloc)
+ return 0;
+ size = _ALIGN(cxt->max_size + (nextra - tot) + EXPAND_INCR, 8);
+ newp = cxt->realloc(cxt->bph, size);
+ if (!newp)
+ return 0;
+ cxt->max_size = size;
+ oldp = (char *)cxt->bph;
+ shift = newp - oldp;
+
+ if (shift != 0) { /* realloc can return same addr */
+ cxt->bph = (struct boot_param_header *)newp;
+ memmove(newp, oldp, sizeof(struct boot_param_header));
+ ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start,
+ shift);
+ for (r = FT_RSVMAP; r <= FT_STRUCT; ++r) {
+ new_start = cxt->rgn[r].start + shift;
+ memmove(new_start, cxt->rgn[r].start,
+ cxt->rgn[r].size);
+ cxt->rgn[r].start = new_start;
+ }
+ *pp += shift;
+ }
+
+ /* move strings up to the end */
+ str = newp + size - ssize;
+ cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start;
+ memmove(str, cxt->rgn[FT_STRINGS].start, ssize);
+ cxt->rgn[FT_STRINGS].start = str;
+
+ if (ft_shuffle(cxt, pp, rgn, nextra))
+ return 1;
+ }
+
+ /* must be FT_RSVMAP and we need to move FT_STRUCT up */
+ if (rgn == FT_RSVMAP) {
+ next = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size
+ + nextra;
+ ssize = cxt->rgn[FT_STRUCT].size;
+ if (next + ssize >= cxt->rgn[FT_STRINGS].start)
+ return 0; /* "can't happen" */
+ memmove(next, cxt->rgn[FT_STRUCT].start, ssize);
+ ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, nextra);
+ cxt->rgn[FT_STRUCT].start = next;
+
+ if (ft_shuffle(cxt, pp, rgn, nextra))
+ return 1;
+ }
+
+ return 0; /* "can't happen" */
+}
+
+static void ft_put_word(struct ft_cxt *cxt, u32 v)
+{
+ *(u32 *) cxt->p = cpu_to_be32(v);
+ cxt->p += 4;
+}
+
+static void ft_put_bin(struct ft_cxt *cxt, const void *data, unsigned int sz)
+{
+ unsigned long sza = _ALIGN(sz, 4);
+
+ /* zero out the alignment gap if necessary */
+ if (sz < sza)
+ *(u32 *) (cxt->p + sza - 4) = 0;
+
+ /* copy in the data */
+ memcpy(cxt->p, data, sz);
+
+ cxt->p += sza;
+}
+
+int ft_begin_node(struct ft_cxt *cxt, const char *name)
+{
+ unsigned long nlen = strlen(name) + 1;
+ unsigned long len = 8 + _ALIGN(nlen, 4);
+
+ if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len))
+ return -1;
+ ft_put_word(cxt, OF_DT_BEGIN_NODE);
+ ft_put_bin(cxt, name, strlen(name) + 1);
+ return 0;
+}
+
+void ft_end_node(struct ft_cxt *cxt)
+{
+ ft_put_word(cxt, OF_DT_END_NODE);
+}
+
+void ft_nop(struct ft_cxt *cxt)
+{
+ if (ft_make_space(cxt, &cxt->p, FT_STRUCT, 4))
+ ft_put_word(cxt, OF_DT_NOP);
+}
+
+#define NO_STRING 0x7fffffff
+
+static int lookup_string(struct ft_cxt *cxt, const char *name)
+{
+ char *p, *end;
+
+ p = cxt->rgn[FT_STRINGS].start;
+ end = p + cxt->rgn[FT_STRINGS].size;
+ while (p < end) {
+ if (strcmp(p, (char *)name) == 0)
+ return p - cxt->str_anchor;
+ p += strlen(p) + 1;
+ }
+
+ return NO_STRING;
+}
+
+/* lookup string and insert if not found */
+static int map_string(struct ft_cxt *cxt, const char *name)
+{
+ int off;
+ char *p;
+
+ off = lookup_string(cxt, name);
+ if (off != NO_STRING)
+ return off;
+ p = cxt->rgn[FT_STRINGS].start;
+ if (!ft_make_space(cxt, &p, FT_STRINGS, strlen(name) + 1))
+ return NO_STRING;
+ strcpy(p, name);
+ return p - cxt->str_anchor;
+}
+
+int ft_prop(struct ft_cxt *cxt, const char *name, const void *data,
+ unsigned int sz)
+{
+ int off, len;
+
+ off = lookup_string(cxt, name);
+ if (off == NO_STRING)
+ return -1;
+
+ len = 12 + _ALIGN(sz, 4);
+ if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len))
+ return -1;
+
+ ft_put_word(cxt, OF_DT_PROP);
+ ft_put_word(cxt, sz);
+ ft_put_word(cxt, off);
+ ft_put_bin(cxt, data, sz);
+ return 0;
+}
+
+int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str)
+{
+ return ft_prop(cxt, name, str, strlen(str) + 1);
+}
+
+int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val)
+{
+ u32 v = cpu_to_be32((u32) val);
+
+ return ft_prop(cxt, name, &v, 4);
+}
+
+/* Calculate the size of the reserved map */
+static unsigned long rsvmap_size(struct ft_cxt *cxt)
+{
+ struct ft_reserve *res;
+
+ res = (struct ft_reserve *)cxt->rgn[FT_RSVMAP].start;
+ while (res->start || res->len)
+ ++res;
+ return (char *)(res + 1) - cxt->rgn[FT_RSVMAP].start;
+}
+
+/* Calculate the size of the struct region by stepping through it */
+static unsigned long struct_size(struct ft_cxt *cxt)
+{
+ char *p = cxt->rgn[FT_STRUCT].start;
+ char *next;
+ struct ft_atom atom;
+
+ /* make check in ft_next happy */
+ if (cxt->rgn[FT_STRUCT].size == 0)
+ cxt->rgn[FT_STRUCT].size = 0xfffffffful - (unsigned long)p;
+
+ while ((next = ft_next(cxt, p, &atom)) != NULL)
+ p = next;
+ return p + 4 - cxt->rgn[FT_STRUCT].start;
+}
+
+/* add `adj' on to all string offset values in the struct area */
+static void adjust_string_offsets(struct ft_cxt *cxt, int adj)
+{
+ char *p = cxt->rgn[FT_STRUCT].start;
+ char *next;
+ struct ft_atom atom;
+ int off;
+
+ while ((next = ft_next(cxt, p, &atom)) != NULL) {
+ if (atom.tag == OF_DT_PROP) {
+ off = be32_to_cpu(*(u32 *) (p + 8));
+ *(u32 *) (p + 8) = cpu_to_be32(off + adj);
+ }
+ p = next;
+ }
+}
+
+/* start construction of the flat OF tree from scratch */
+void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size,
+ void *(*realloc_fn) (void *, unsigned long))
+{
+ struct boot_param_header *bph = blob;
+ char *p;
+ struct ft_reserve *pres;
+
+ /* clear the cxt */
+ memset(cxt, 0, sizeof(*cxt));
+
+ cxt->bph = bph;
+ cxt->max_size = max_size;
+ cxt->realloc = realloc_fn;
+ cxt->isordered = 1;
+
+ /* zero everything in the header area */
+ memset(bph, 0, sizeof(*bph));
+
+ bph->magic = cpu_to_be32(OF_DT_HEADER);
+ bph->version = cpu_to_be32(0x10);
+ bph->last_comp_version = cpu_to_be32(0x10);
+
+ /* start pointers */
+ cxt->rgn[FT_RSVMAP].start = p = blob + HDR_SIZE;
+ cxt->rgn[FT_RSVMAP].size = sizeof(struct ft_reserve);
+ pres = (struct ft_reserve *)p;
+ cxt->rgn[FT_STRUCT].start = p += sizeof(struct ft_reserve);
+ cxt->rgn[FT_STRUCT].size = 4;
+ cxt->rgn[FT_STRINGS].start = blob + max_size;
+ cxt->rgn[FT_STRINGS].size = 0;
+
+ /* init rsvmap and struct */
+ pres->start = 0;
+ pres->len = 0;
+ *(u32 *) p = cpu_to_be32(OF_DT_END);
+
+ cxt->str_anchor = blob;
+}
+
+/* open up an existing blob to be examined or modified */
+int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size,
+ unsigned int max_find_device,
+ void *(*realloc_fn) (void *, unsigned long))
+{
+ struct boot_param_header *bph = blob;
+
+ /* can't cope with version < 16 */
+ if (be32_to_cpu(bph->version) < 16)
+ return -1;
+
+ /* clear the cxt */
+ memset(cxt, 0, sizeof(*cxt));
+
+ /* alloc node_tbl to track node ptrs returned by ft_find_device */
+ ++max_find_device;
+ cxt->node_tbl = realloc_fn(NULL, max_find_device * sizeof(char *));
+ if (!cxt->node_tbl)
+ return -1;
+ memset(cxt->node_tbl, 0, max_find_device * sizeof(char *));
+ cxt->node_max = max_find_device;
+ cxt->nodes_used = 1; /* don't use idx 0 b/c looks like NULL */
+
+ cxt->bph = bph;
+ cxt->max_size = max_size;
+ cxt->realloc = realloc_fn;
+
+ cxt->rgn[FT_RSVMAP].start = blob + be32_to_cpu(bph->off_mem_rsvmap);
+ cxt->rgn[FT_RSVMAP].size = rsvmap_size(cxt);
+ cxt->rgn[FT_STRUCT].start = blob + be32_to_cpu(bph->off_dt_struct);
+ cxt->rgn[FT_STRUCT].size = struct_size(cxt);
+ cxt->rgn[FT_STRINGS].start = blob + be32_to_cpu(bph->off_dt_strings);
+ cxt->rgn[FT_STRINGS].size = be32_to_cpu(bph->dt_strings_size);
+ cxt->isordered = ft_ordered(cxt);
+
+ cxt->p = cxt->rgn[FT_STRUCT].start;
+ cxt->str_anchor = cxt->rgn[FT_STRINGS].start;
+
+ return 0;
+}
+
+/* add a reserver physical area to the rsvmap */
+int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size)
+{
+ char *p;
+ struct ft_reserve *pres;
+
+ p = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size
+ - sizeof(struct ft_reserve);
+ if (!ft_make_space(cxt, &p, FT_RSVMAP, sizeof(struct ft_reserve)))
+ return -1;
+
+ pres = (struct ft_reserve *)p;
+ pres->start = cpu_to_be64(physaddr);
+ pres->len = cpu_to_be64(size);
+
+ return 0;
+}
+
+void ft_begin_tree(struct ft_cxt *cxt)
+{
+ cxt->p = cxt->rgn[FT_STRUCT].start;
+}
+
+void ft_end_tree(struct ft_cxt *cxt)
+{
+ struct boot_param_header *bph = cxt->bph;
+ char *p, *oldstr, *str, *endp;
+ unsigned long ssize;
+
+ if (!cxt->isordered)
+ return; /* we haven't touched anything */
+
+ /* adjust string offsets */
+ oldstr = cxt->rgn[FT_STRINGS].start;
+ adjust_string_offsets(cxt, cxt->str_anchor - oldstr);
+
+ /* make strings end on 8-byte boundary */
+ ssize = cxt->rgn[FT_STRINGS].size;
+ endp = (char *)_ALIGN((unsigned long)cxt->rgn[FT_STRUCT].start
+ + cxt->rgn[FT_STRUCT].size + ssize, 8);
+ str = endp - ssize;
+
+ /* move strings down to end of structs */
+ memmove(str, oldstr, ssize);
+ cxt->str_anchor = str;
+ cxt->rgn[FT_STRINGS].start = str;
+
+ /* fill in header fields */
+ p = (char *)bph;
+ bph->totalsize = cpu_to_be32(endp - p);
+ bph->off_mem_rsvmap = cpu_to_be32(cxt->rgn[FT_RSVMAP].start - p);
+ bph->off_dt_struct = cpu_to_be32(cxt->rgn[FT_STRUCT].start - p);
+ bph->off_dt_strings = cpu_to_be32(cxt->rgn[FT_STRINGS].start - p);
+ bph->dt_strings_size = cpu_to_be32(ssize);
+}
+
+void *ft_find_device(struct ft_cxt *cxt, const char *srch_path)
+{
+ char *node;
+
+ /* require absolute path */
+ if (srch_path[0] != '/')
+ return NULL;
+ node = ft_find_descendent(cxt, cxt->rgn[FT_STRUCT].start, srch_path);
+ return ft_node_add(cxt, node);
+}
+
+void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path)
+{
+ struct ft_atom atom;
+ char *p;
+ const char *cp, *q;
+ int cl;
+ int depth = -1;
+ int dmatch = 0;
+ const char *path_comp[FT_MAX_DEPTH];
+
+ cp = srch_path;
+ cl = 0;
+ p = top;
+
+ while ((p = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ ++depth;
+ if (depth != dmatch)
+ break;
+ cxt->genealogy[depth] = atom.data;
+ cxt->genealogy[depth + 1] = NULL;
+ if (depth && !(strncmp(atom.name, cp, cl) == 0
+ && (atom.name[cl] == '/'
+ || atom.name[cl] == '\0'
+ || atom.name[cl] == '@')))
+ break;
+ path_comp[dmatch] = cp;
+ /* it matches so far, advance to next path component */
+ cp += cl;
+ /* skip slashes */
+ while (*cp == '/')
+ ++cp;
+ /* we're done if this is the end of the string */
+ if (*cp == 0)
+ return atom.data;
+ /* look for end of this component */
+ q = strchr(cp, '/');
+ if (q)
+ cl = q - cp;
+ else
+ cl = strlen(cp);
+ ++dmatch;
+ break;
+ case OF_DT_END_NODE:
+ if (depth == 0)
+ return NULL;
+ if (dmatch > depth) {
+ --dmatch;
+ cl = cp - path_comp[dmatch] - 1;
+ cp = path_comp[dmatch];
+ while (cl > 0 && cp[cl - 1] == '/')
+ --cl;
+ }
+ --depth;
+ break;
+ }
+ }
+ return NULL;
+}
+
+void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
+{
+ void *node;
+ int d;
+ struct ft_atom atom;
+ char *p;
+
+ node = ft_node_ph2node(cxt, phandle);
+ if (node == NULL)
+ return NULL;
+
+ for (d = 0; cxt->genealogy[d] != NULL; ++d)
+ if (cxt->genealogy[d] == node)
+ return cxt->genealogy[d > 0 ? d - 1 : 0];
+
+ /* have to do it the hard way... */
+ p = cxt->rgn[FT_STRUCT].start;
+ d = 0;
+ while ((p = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ cxt->genealogy[d] = atom.data;
+ if (node == atom.data) {
+ /* found it */
+ cxt->genealogy[d + 1] = NULL;
+ return d > 0 ? cxt->genealogy[d - 1] : node;
+ }
+ ++d;
+ break;
+ case OF_DT_END_NODE:
+ --d;
+ break;
+ }
+ }
+ return NULL;
+}
+
+int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
+ void *buf, const unsigned int buflen)
+{
+ struct ft_atom atom;
+ void *node;
+ char *p;
+ int depth;
+ unsigned int size;
+
+ node = ft_node_ph2node(cxt, phandle);
+ if (node == NULL)
+ return -1;
+
+ depth = 0;
+ p = (char *)node;
+
+ while ((p = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ ++depth;
+ break;
+ case OF_DT_PROP:
+ if ((depth != 1) || strcmp(atom.name, propname))
+ break;
+ size = min(atom.size, buflen);
+ memcpy(buf, atom.data, size);
+ return atom.size;
+ case OF_DT_END_NODE:
+ if (--depth <= 0)
+ return -1;
+ }
+ }
+ return -1;
+}
+
+int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
+ const void *buf, const unsigned int buflen)
+{
+ struct ft_atom atom;
+ void *node;
+ char *p, *next;
+ int nextra, depth;
+
+ node = ft_node_ph2node(cxt, phandle);
+ if (node == NULL)
+ return -1;
+
+ depth = 0;
+ p = node;
+
+ while ((next = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ ++depth;
+ break;
+ case OF_DT_END_NODE:
+ if (--depth > 0)
+ break;
+ /* haven't found the property, insert here */
+ cxt->p = p;
+ return ft_prop(cxt, propname, buf, buflen);
+ case OF_DT_PROP:
+ if ((depth != 1) || strcmp(atom.name, propname))
+ break;
+ /* found an existing property, overwrite it */
+ nextra = _ALIGN(buflen, 4) - _ALIGN(atom.size, 4);
+ cxt->p = atom.data;
+ if (nextra && !ft_make_space(cxt, &cxt->p, FT_STRUCT,
+ nextra))
+ return -1;
+ *(u32 *) (cxt->p - 8) = cpu_to_be32(buflen);
+ ft_put_bin(cxt, buf, buflen);
+ return 0;
+ }
+ p = next;
+ }
+ return -1;
+}
+
+int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname)
+{
+ struct ft_atom atom;
+ void *node;
+ char *p, *next;
+ int size;
+
+ node = ft_node_ph2node(cxt, phandle);
+ if (node == NULL)
+ return -1;
+
+ p = node;
+ while ((next = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ case OF_DT_END_NODE:
+ return -1;
+ case OF_DT_PROP:
+ if (strcmp(atom.name, propname))
+ break;
+ /* found the property, remove it */
+ size = 12 + -_ALIGN(atom.size, 4);
+ cxt->p = p;
+ if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, -size))
+ return -1;
+ return 0;
+ }
+ p = next;
+ }
+ return -1;
+}
+
+void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path)
+{
+ struct ft_atom atom;
+ char *p, *next;
+ int depth = 0;
+
+ p = cxt->rgn[FT_STRUCT].start;
+ while ((next = ft_next(cxt, p, &atom)) != NULL) {
+ switch (atom.tag) {
+ case OF_DT_BEGIN_NODE:
+ ++depth;
+ if (depth == 1 && strcmp(atom.name, path) == 0)
+ /* duplicate node path, return error */
+ return NULL;
+ break;
+ case OF_DT_END_NODE:
+ --depth;
+ if (depth > 0)
+ break;
+ /* end of node, insert here */
+ cxt->p = p;
+ ft_begin_node(cxt, path);
+ ft_end_node(cxt);
+ return p;
+ }
+ p = next;
+ }
+ return NULL;
+}
diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h
index 761c8dc..b9cd9f6 100644
--- a/arch/powerpc/boot/flatdevtree.h
+++ b/arch/powerpc/boot/flatdevtree.h
@@ -17,7 +17,7 @@
#ifndef FLATDEVTREE_H
#define FLATDEVTREE_H
-#include "types.h"
+#include "flatdevtree_env.h"
/* Definitions used by the flattened device tree */
#define OF_DT_HEADER 0xd00dfeed /* marker */
@@ -43,4 +43,64 @@ struct boot_param_header {
u32 dt_strings_size; /* size of the DT strings block */
};
+struct ft_reserve {
+ u64 start;
+ u64 len;
+};
+
+struct ft_region {
+ char *start;
+ unsigned long size;
+};
+
+enum ft_rgn_id {
+ FT_RSVMAP,
+ FT_STRUCT,
+ FT_STRINGS,
+ FT_N_REGION
+};
+
+#define FT_MAX_DEPTH 50
+
+struct ft_cxt {
+ struct boot_param_header *bph;
+ int max_size; /* maximum size of tree */
+ int isordered; /* everything in standard order */
+ void *(*realloc)(void *, unsigned long);
+ char *str_anchor;
+ char *p; /* current insertion point in structs */
+ struct ft_region rgn[FT_N_REGION];
+ void *genealogy[FT_MAX_DEPTH+1];
+ char **node_tbl;
+ unsigned int node_max;
+ unsigned int nodes_used;
+};
+
+int ft_begin_node(struct ft_cxt *cxt, const char *name);
+void ft_end_node(struct ft_cxt *cxt);
+
+void ft_begin_tree(struct ft_cxt *cxt);
+void ft_end_tree(struct ft_cxt *cxt);
+
+void ft_nop(struct ft_cxt *cxt);
+int ft_prop(struct ft_cxt *cxt, const char *name,
+ const void *data, unsigned int sz);
+int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str);
+int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val);
+void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size,
+ void *(*realloc_fn)(void *, unsigned long));
+int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size,
+ unsigned int max_find_device,
+ void *(*realloc_fn)(void *, unsigned long));
+int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
+
+void ft_dump_blob(const void *bphp);
+void ft_merge_blob(struct ft_cxt *cxt, void *blob);
+void *ft_find_device(struct ft_cxt *cxt, const char *srch_path);
+void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path);
+int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
+ void *buf, const unsigned int buflen);
+int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
+ const void *buf, const unsigned int buflen);
+
#endif /* FLATDEVTREE_H */
diff --git a/arch/powerpc/boot/flatdevtree_env.h b/arch/powerpc/boot/flatdevtree_env.h
new file mode 100644
index 0000000..83bc1c7
--- /dev/null
+++ b/arch/powerpc/boot/flatdevtree_env.h
@@ -0,0 +1,47 @@
+/*
+ * This file adds the header file glue so that the shared files
+ * flatdevicetree.[ch] can compile and work in the powerpc bootwrapper.
+ *
+ * strncmp & strchr copied from <file:lib/strings.c>
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Maintained by: Mark A. Greer <mgreer@mvista.com>
+ */
+#ifndef _PPC_BOOT_FLATDEVTREE_ENV_H_
+#define _PPC_BOOT_FLATDEVTREE_ENV_H_
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+
+#define be16_to_cpu(x) (x)
+#define cpu_to_be16(x) (x)
+#define be32_to_cpu(x) (x)
+#define cpu_to_be32(x) (x)
+#define be64_to_cpu(x) (x)
+#define cpu_to_be64(x) (x)
+
+static inline int strncmp(const char *cs, const char *ct, size_t count)
+{
+ signed char __res = 0;
+
+ while (count) {
+ if ((__res = *cs - *ct++) != 0 || !*cs++)
+ break;
+ count--;
+ }
+ return __res;
+}
+
+static inline char *strchr(const char *s, int c)
+{
+ for (; *s != (char)c; ++s)
+ if (*s == '\0')
+ return NULL;
+ return (char *)s;
+}
+
+#endif /* _PPC_BOOT_FLATDEVTREE_ENV_H_ */
diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c
new file mode 100644
index 0000000..c7f9adb
--- /dev/null
+++ b/arch/powerpc/boot/flatdevtree_misc.c
@@ -0,0 +1,56 @@
+/*
+ * This file does the necessary interface mapping between the bootwrapper
+ * device tree operations and the interface provided by shared source
+ * files flatdevicetree.[ch].
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <stddef.h>
+#include "flatdevtree.h"
+#include "ops.h"
+
+static struct ft_cxt cxt;
+
+static void *ft_finddevice(const char *name)
+{
+ return ft_find_device(&cxt, name);
+}
+
+static int ft_getprop(const void *phandle, const char *propname, void *buf,
+ const int buflen)
+{
+ return ft_get_prop(&cxt, phandle, propname, buf, buflen);
+}
+
+static int ft_setprop(const void *phandle, const char *propname,
+ const void *buf, const int buflen)
+{
+ return ft_set_prop(&cxt, phandle, propname, buf, buflen);
+}
+
+static void ft_pack(void)
+{
+ ft_end_tree(&cxt);
+}
+
+static unsigned long ft_addr(void)
+{
+ return (unsigned long)cxt.bph;
+}
+
+int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device)
+{
+ dt_ops.finddevice = ft_finddevice;
+ dt_ops.getprop = ft_getprop;
+ dt_ops.setprop = ft_setprop;
+ dt_ops.ft_pack = ft_pack;
+ dt_ops.ft_addr = ft_addr;
+
+ return ft_open(&cxt, dt_blob, max_size, max_find_device,
+ platform_ops.realloc);
+}
^ permalink raw reply related
* [PATCH 1/4] powerpc: More bootwrapper reorg
From: Mark A. Greer @ 2006-10-10 6:11 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
More reorganization of the bootwrapper:
- Add dtb section to zImage
- ft_init now called by platform_init
- Pack a flat dt before calling kernel
- Remove size parameter from free
- printf only calls console_ops.write it its not NULL
- Some cleanup
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
---
main.c | 27 ++++++---------------------
of.c | 8 +-------
ops.h | 25 ++++++++++++++-----------
stdio.c | 3 ++-
wrapper | 4 ++--
zImage.lds.S | 5 +++++
6 files changed, 30 insertions(+), 42 deletions(-)
---
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index d719bb9..4184974 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -27,6 +27,8 @@ extern char _vmlinux_start[];
extern char _vmlinux_end[];
extern char _initrd_start[];
extern char _initrd_end[];
+extern char _dtb_start[];
+extern char _dtb_end[];
struct addr_range {
unsigned long addr;
@@ -250,10 +252,6 @@ #endif
flush_cache((void *)vmlinux.addr, vmlinux.size);
}
-void __attribute__ ((weak)) ft_init(void *dt_blob)
-{
-}
-
/* A buffer that may be edited by tools operating on a zImage binary so as to
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
@@ -285,19 +283,12 @@ static void set_cmdline(char *buf)
setprop(devp, "bootargs", buf, strlen(buf) + 1);
}
-/* Section where ft can be tacked on after zImage is built */
-union blobspace {
- struct boot_param_header hdr;
- char space[8*1024];
-} dt_blob __attribute__((__section__("__builtin_ft")));
-
struct platform_ops platform_ops;
struct dt_ops dt_ops;
struct console_ops console_ops;
void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
{
- int have_dt = 0;
kernel_entry_t kentry;
char cmdline[COMMAND_LINE_SIZE];
@@ -306,15 +297,7 @@ void start(unsigned long a1, unsigned lo
memset(&dt_ops, 0, sizeof(dt_ops));
memset(&console_ops, 0, sizeof(console_ops));
- /* Override the dt_ops and device tree if there was an flat dev
- * tree attached to the zImage.
- */
- if (dt_blob.hdr.magic == OF_DT_HEADER) {
- have_dt = 1;
- ft_init(&dt_blob);
- }
-
- if (platform_init(promptr))
+ if (platform_init(promptr, _dtb_start, _dtb_end))
exit();
if (console_ops.open && (console_ops.open() < 0))
exit();
@@ -342,8 +325,10 @@ void start(unsigned long a1, unsigned lo
console_ops.close();
kentry = (kernel_entry_t) vmlinux.addr;
- if (have_dt)
+ if (_dtb_end > _dtb_start) {
+ dt_ops.ft_pack();
kentry(dt_ops.ft_addr(), 0, NULL);
+ }
else
/* XXX initrd addr/size should be passed in properties */
kentry(a1, a2, promptr);
diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c
index 3a71845..0182f38 100644
--- a/arch/powerpc/boot/of.c
+++ b/arch/powerpc/boot/of.c
@@ -256,24 +256,18 @@ static void of_console_write(char *buf,
call_prom("write", 3, 1, of_stdout_handle, buf, len);
}
-int platform_init(void *promptr)
+int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end)
{
- platform_ops.fixups = NULL;
platform_ops.image_hdr = of_image_hdr;
platform_ops.malloc = of_try_claim;
- platform_ops.free = NULL;
platform_ops.exit = of_exit;
dt_ops.finddevice = of_finddevice;
dt_ops.getprop = of_getprop;
dt_ops.setprop = of_setprop;
- dt_ops.translate_addr = NULL;
console_ops.open = of_console_open;
console_ops.write = of_console_write;
- console_ops.edit_cmdline = NULL;
- console_ops.close = NULL;
- console_ops.data = NULL;
prom = (int (*)(void *))promptr;
return 0;
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 135eb4b..59832fb 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -22,7 +22,8 @@ struct platform_ops {
void (*fixups)(void);
void (*image_hdr)(const void *);
void * (*malloc)(u32 size);
- void (*free)(void *ptr, u32 size);
+ void (*free)(void *ptr);
+ void * (*realloc)(void *ptr, unsigned long size);
void (*exit)(void);
};
extern struct platform_ops platform_ops;
@@ -30,12 +31,11 @@ extern struct platform_ops platform_ops;
/* Device Tree operations */
struct dt_ops {
void * (*finddevice)(const char *name);
- int (*getprop)(const void *node, const char *name, void *buf,
+ int (*getprop)(const void *phandle, const char *name, void *buf,
const int buflen);
- int (*setprop)(const void *node, const char *name,
+ int (*setprop)(const void *phandle, const char *name,
const void *buf, const int buflen);
- u64 (*translate_addr)(const char *path, const u32 *in_addr,
- const u32 addr_len);
+ void (*ft_pack)(void);
unsigned long (*ft_addr)(void);
};
extern struct dt_ops dt_ops;
@@ -59,10 +59,13 @@ struct serial_console_data {
void (*close)(void);
};
-extern int platform_init(void *promptr);
-extern void simple_alloc_init(void);
-extern void ft_init(void *dt_blob);
-extern int serial_console_init(void);
+int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end);
+int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
+int serial_console_init(void);
+int ns16550_console_init(void *devp, struct serial_console_data *scdp);
+void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
+ u32 max_allocs);
+
static inline void *finddevice(const char *name)
{
@@ -84,10 +87,10 @@ static inline void *malloc(u32 size)
return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL;
}
-static inline void free(void *ptr, u32 size)
+static inline void free(void *ptr)
{
if (platform_ops.free)
- platform_ops.free(ptr, size);
+ platform_ops.free(ptr);
}
static inline void exit(void)
diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c
index 6d5f638..0a9feeb 100644
--- a/arch/powerpc/boot/stdio.c
+++ b/arch/powerpc/boot/stdio.c
@@ -320,6 +320,7 @@ printf(const char *fmt, ...)
va_start(args, fmt);
n = vsprintf(sprint_buf, fmt, args);
va_end(args);
- console_ops.write(sprint_buf, n);
+ if (console_ops.write)
+ console_ops.write(sprint_buf, n);
return n;
}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index eab7318..b5fb1fe 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -179,11 +179,11 @@ if [ -z "$cacheit" ]; then
fi
if [ -n "$initrd" ]; then
- addsec $tmp "$initrd" initrd
+ addsec $tmp "$initrd" $isection
fi
if [ -n "$dtb" ]; then
- addsec $tmp "$dtb" dtb
+ addsec $tmp "$dtb" .kernel:dtb
fi
if [ "$platform" != "miboot" ]; then
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 4b6bb3f..4be3c64 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -21,6 +21,11 @@ SECTIONS
__got2_end = .;
}
+ . = ALIGN(8);
+ _dtb_start = .;
+ .kernel:dtb : { *(.kernel:dtb) }
+ _dtb_end = .;
+
. = ALIGN(4096);
_vmlinux_start = .;
.kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox