* [PATCH] [POWERPC] pci_32.c: use for_each_child_of_node
From: Stephen Rothwell @ 2007-12-21 4:52 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/kernel/pci_32.c | 20 +++++++++++++-------
1 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 37cb7b9..b5121b8 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -13,6 +13,7 @@
#include <linux/bootmem.h>
#include <linux/irq.h>
#include <linux/list.h>
+#include <linux/of.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -171,7 +172,7 @@ make_one_node_map(struct device_node* node, u8 pci_bus)
} else
pci_to_OF_bus_map[pci_bus] = bus_range[0];
- for (node=node->child; node != 0;node = node->sibling) {
+ for_each_child_of_node(node, node) {
struct pci_dev* dev;
const unsigned int *class_code, *reg;
@@ -240,15 +241,18 @@ pcibios_make_OF_bus_map(void)
typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
static struct device_node*
-scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
+scan_OF_pci_childs(struct device_node *parent, pci_OF_scan_iterator filter, void* data)
{
+ struct device_node *node;
struct device_node* sub_node;
- for (; node != 0;node = node->sibling) {
+ for_each_child_of_node(parent, node) {
const unsigned int *class_code;
- if (filter(node, data))
+ if (filter(node, data)) {
+ of_node_put(node);
return node;
+ }
/* For PCI<->PCI bridges or CardBus bridges, we go down
* Note: some OFs create a parent node "multifunc-device" as
@@ -260,9 +264,11 @@ scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void*
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
strcmp(node->name, "multifunc-device"))
continue;
- sub_node = scan_OF_pci_childs(node->child, filter, data);
- if (sub_node)
+ sub_node = scan_OF_pci_childs(node, filter, data);
+ if (sub_node) {
+ of_node_put(node);
return sub_node;
+ }
}
return NULL;
}
@@ -366,7 +372,7 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
hose = pci_find_hose_for_OF_device(node);
if (!hose || !hose->dn)
return -ENODEV;
- if (!scan_OF_pci_childs(hose->dn->child,
+ if (!scan_OF_pci_childs(hose->dn,
find_OF_pci_device_filter, (void *)node))
return -ENODEV;
reg = of_get_property(node, "reg", NULL);
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH] [POWERPC] eeh.c: use for_each_child_of_node
From: Stephen Rothwell @ 2007-12-21 4:52 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/platforms/pseries/eeh.c | 43 ++++++++++++++++-----------------
1 files changed, 21 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index aa14a85..9eb539e 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -29,6 +29,8 @@
#include <linux/rbtree.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <linux/of.h>
+
#include <asm/atomic.h>
#include <asm/eeh.h>
#include <asm/eeh_event.h>
@@ -169,7 +171,6 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
*/
static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
{
- struct device_node *dn;
struct pci_dev *dev = pdn->pcidev;
u32 cfg;
int cap, i;
@@ -243,12 +244,12 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
/* Gather status on devices under the bridge */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
- dn = pdn->node->child;
- while (dn) {
+ struct device_node *dn;
+
+ for_each_child_of_node(pdn->node, dn) {
pdn = PCI_DN(dn);
if (pdn)
n += gather_pci_data(pdn, buf+n, len-n);
- dn = dn->sibling;
}
}
@@ -372,7 +373,7 @@ struct device_node * find_device_pe(struct device_node *dn)
return dn;
}
-/** Mark all devices that are peers of this device as failed.
+/** Mark all devices that are children of this device as failed.
* Mark the device driver too, so that it can see the failure
* immediately; this is critical, since some drivers poll
* status registers in interrupts ... If a driver is polling,
@@ -380,9 +381,11 @@ struct device_node * find_device_pe(struct device_node *dn)
* an interrupt context, which is bad.
*/
-static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
+static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
{
- while (dn) {
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
if (PCI_DN(dn)) {
/* Mark the pci device driver too */
struct pci_dev *dev = PCI_DN(dn)->pcidev;
@@ -392,10 +395,8 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
if (dev && dev->driver)
dev->error_state = pci_channel_io_frozen;
- if (dn->child)
- __eeh_mark_slot (dn->child, mode_flag);
+ __eeh_mark_slot(dn, mode_flag);
}
- dn = dn->sibling;
}
}
@@ -415,19 +416,19 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag)
if (dev)
dev->error_state = pci_channel_io_frozen;
- __eeh_mark_slot (dn->child, mode_flag);
+ __eeh_mark_slot(dn, mode_flag);
}
-static void __eeh_clear_slot (struct device_node *dn, int mode_flag)
+static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
{
- while (dn) {
+ struct device_node *dn;
+
+ for_each_child_of_node(parent, dn) {
if (PCI_DN(dn)) {
PCI_DN(dn)->eeh_mode &= ~mode_flag;
PCI_DN(dn)->eeh_check_count = 0;
- if (dn->child)
- __eeh_clear_slot (dn->child, mode_flag);
+ __eeh_clear_slot(dn, mode_flag);
}
- dn = dn->sibling;
}
}
@@ -444,7 +445,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
PCI_DN(dn)->eeh_mode &= ~mode_flag;
PCI_DN(dn)->eeh_check_count = 0;
- __eeh_clear_slot (dn->child, mode_flag);
+ __eeh_clear_slot(dn, mode_flag);
spin_unlock_irqrestore(&confirm_error_lock, flags);
}
@@ -849,11 +850,8 @@ void eeh_restore_bars(struct pci_dn *pdn)
if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
__restore_bars (pdn);
- dn = pdn->node->child;
- while (dn) {
+ for_each_child_of_node(pdn->node, dn)
eeh_restore_bars (PCI_DN(dn));
- dn = dn->sibling;
- }
}
/**
@@ -1131,7 +1129,8 @@ static void eeh_add_device_early(struct device_node *dn)
void eeh_add_device_tree_early(struct device_node *dn)
{
struct device_node *sib;
- for (sib = dn->child; sib; sib = sib->sibling)
+
+ for_each_child_of_node(dn, sib)
eeh_add_device_tree_early(sib);
eeh_add_device_early(dn);
}
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH 3/3] [POWERPC] iSeries: eliminate pci_dn bussubno
From: Stephen Rothwell @ 2007-12-21 4:50 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
In-Reply-To: <20071221154911.c437013e.sfr@canb.auug.org.au>
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store
that value (instead of the BAR number) when we allocate the device bars.
This is not a fast path, so we can look up the device_node property
there instead of using the bussubno field of the pci_dn.
The other user of iseries_ds_addr() was already scanning the device tree,
so looking up a property will not slow it down any more.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/kernel/pci_dn.c | 5 -----
arch/powerpc/platforms/iseries/pci.c | 12 +++++++-----
include/asm-powerpc/pci-bridge.h | 1 -
3 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 85d4d89..1c67de5 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -56,11 +56,6 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
pdn->busno = (regs[0] >> 16) & 0xff;
pdn->devfn = (regs[0] >> 8) & 0xff;
}
- if (firmware_has_feature(FW_FEATURE_ISERIES)) {
- const u32 *busp = of_get_property(dn, "linux,subbus", NULL);
- if (busp)
- pdn->bussubno = *busp;
- }
pdn->pci_ext_config_space = (type && *type == 1);
return NULL;
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 9319410..cc562e4 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/of.h>
#include <asm/types.h>
#include <asm/io.h>
@@ -70,7 +71,7 @@ static long current_iomm_table_entry;
* Lookup Tables.
*/
static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES];
-static u8 iobar_table[IOMM_TABLE_MAX_ENTRIES];
+static u64 ds_addr_table[IOMM_TABLE_MAX_ENTRIES];
static DEFINE_SPINLOCK(iomm_table_lock);
@@ -80,8 +81,9 @@ static DEFINE_SPINLOCK(iomm_table_lock);
static inline u64 iseries_ds_addr(struct device_node *node)
{
struct pci_dn *pdn = PCI_DN(node);
+ const u32 *sbp = of_get_property(node, "linux,subbus", NULL);
- return ((u64)pdn->busno << 48) + ((u64)pdn->bussubno << 40)
+ return ((u64)pdn->busno << 48) + ((u64)(sbp ? *sbp : 0) << 40)
+ ((u64)0x10 << 32);
}
@@ -333,7 +335,8 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
*/
while (bar_size > 0 ) {
iomm_table[current_iomm_table_entry] = dev->sysdata;
- iobar_table[current_iomm_table_entry] = bar_num;
+ ds_addr_table[current_iomm_table_entry] =
+ iseries_ds_addr(dev->sysdata) | (bar_num << 24);
bar_size -= IOMM_TABLE_ENTRY_SIZE;
++current_iomm_table_entry;
}
@@ -598,8 +601,7 @@ static inline struct device_node *xlate_iomm_address(
dn = iomm_table[ind];
if (dn != NULL) {
- int barnum = iobar_table[ind];
- *dsaptr = iseries_ds_addr(dn) | (barnum << 24);
+ *dsaptr = ds_addr_table[ind];
*bar_offset = base_addr % IOMM_TABLE_ENTRY_SIZE;
} else
panic("PCI: Invalid PCI IO address detected!\n");
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 2932404..a6ea49e 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -165,7 +165,6 @@ struct iommu_table;
struct pci_dn {
int busno; /* pci bus number */
- int bussubno; /* pci subordinate bus number */
int devfn; /* pci device and function number */
struct pci_controller *phb; /* for pci devices */
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH 2/3] [POWERPC] the pci_dn pcidev is only used by EEH
From: Stephen Rothwell @ 2007-12-21 4:49 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
In-Reply-To: <20071221154818.95b51c8a.sfr@canb.auug.org.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/platforms/iseries/pci.c | 1 -
include/asm-powerpc/pci-bridge.h | 2 +-
2 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 30e3d99..9319410 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -438,7 +438,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
}
pdev->sysdata = node;
- PCI_DN(node)->pcidev = pdev;
allocate_device_bars(pdev);
iseries_device_information(pdev, bus, *sub_bus);
iommu_devnode_init_iSeries(pdev, node);
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 07cdb5b..2932404 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -170,12 +170,12 @@ struct pci_dn {
struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */
- struct pci_dev *pcidev; /* back-pointer to the pci device */
struct device_node *node; /* back-pointer to the device_node */
int pci_ext_config_space; /* for pci devices */
#ifdef CONFIG_EEH
+ struct pci_dev *pcidev; /* back-pointer to the pci device */
int class_code; /* pci device class */
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH 1/3] [POWERPC] the pci_dn class_code is only used by EEH
From: Stephen Rothwell @ 2007-12-21 4:48 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
include/asm-powerpc/pci-bridge.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index 9b16d3b..07cdb5b 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -167,7 +167,6 @@ struct pci_dn {
int busno; /* pci bus number */
int bussubno; /* pci subordinate bus number */
int devfn; /* pci device and function number */
- int class_code; /* pci device class */
struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */
@@ -177,6 +176,7 @@ struct pci_dn {
int pci_ext_config_space; /* for pci devices */
#ifdef CONFIG_EEH
+ int class_code; /* pci device class */
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
int eeh_pe_config_addr; /* new-style partition endpoint address */
--
1.5.3.7
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* Re: [patch v2] PS3: Fix printing of os-area magic numbers
From: Paul Mackerras @ 2007-12-21 4:44 UTC (permalink / raw)
To: Geoff Levand; +Cc: Geert Uytterhoeven, linuxppc-dev@ozlabs.org
In-Reply-To: <4745FDDB.7090208@am.sony.com>
Geoff Levand writes:
> Fix a bug in the printing of the os-area magic numbers which assumed that
> magic numbers were zero terminated strings. The magic numbers are represented
> in memory as integers. If the os-area sections are not initialized correctly
> they could contained random data that would be printed to the display.
> + u8 str[sizeof(h->magic_num) + 1];
> + u8 *s, *d;
> +
> + for(s = h->magic_num, d = str; s < h->magic_num + sizeof(h->magic_num);
> + s++, d++) {
> + *d = isprint(*s) ? *s : '.';
> + }
> + d[sizeof(h->magic_num)] = 0;
This last statement is wrong, because d has been incremented to point
to the last byte of str already by this stage.
It would be nicer if you pulled out the two instances of the for loop
into a little helper function.
> + for(s = (u8*)&db->magic_num, d = str;
Why do you need the (u8*) cast in this case but not the other?
Paul.
^ permalink raw reply
* Re: [PATCH] [POWERPC] Make non-PCI build work again
From: Olof Johansson @ 2007-12-21 4:49 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: ppc-dev, paulus
In-Reply-To: <20071221153707.5195fc8f.sfr@canb.auug.org.au>
On Fri, Dec 21, 2007 at 03:37:07PM +1100, Stephen Rothwell wrote:
> Maple and pasemi both require PCI as does CONFIG_OF_PLATFORM_PCI.
> The default setting of CONFIG_ISA_DMA_API is set to match the protection
> around the relevant routines in asm/dma.h.
>
> I also had to remove the PMAC platform from the combined build. The
> precis is that to build a 64 bit kernel with no PCI, you can only include
> pSeries and iSeries.
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/powerpc/Kconfig | 3 ++-
> arch/powerpc/platforms/maple/Kconfig | 1 +
> arch/powerpc/platforms/pasemi/Kconfig | 1 +
Acked-by: Olof Johansson <olof@lixom.net>
-Olof
^ permalink raw reply
* [PATCH 21/21] [POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
From: Stefan Roese <sr@denx.de>
This patch adds runtime detection of the 440SPe revision A chips. These
chips are equipped with a slighly different PCIe core and need special/
different initialization. The compatible node is changed to
"plb-pciex-440spe" ("A" and "B" dropped). This is needed for boards that
can be equipped with both PPC revisions like the AMCC Yucca.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/katmai.dts | 6 +++---
arch/powerpc/sysdev/ppc4xx_pci.c | 25 +++++++++++++++++--------
2 files changed, 20 insertions(+), 11 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/dts/katmai.dts 2007-12-21 14:37:05.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/katmai.dts 2007-12-21 14:37:06.000000000 +1100
@@ -267,7 +267,7 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0>; /* port number */
reg = <d 00000000 20000000 /* Config space access */
@@ -308,7 +308,7 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <1>; /* port number */
reg = <d 20000000 20000000 /* Config space access */
@@ -349,7 +349,7 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <2>; /* port number */
reg = <d 40000000 20000000 /* Config space access */
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c
===================================================================
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-21 14:37:05.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-21 14:37:06.000000000 +1100
@@ -49,6 +49,15 @@ extern unsigned long total_memory;
#define RES_TO_U32_HIGH(val) (0)
#endif
+static inline int ppc440spe_revA(void)
+{
+ /* Catch both 440SPe variants, with and without RAID6 support */
+ if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890)
+ return 1;
+ else
+ return 0;
+}
+
static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
{
struct pci_controller *hose;
@@ -516,8 +525,7 @@ static void __init ppc4xx_probe_pcix_bri
*
* We support 3 parts currently based on the compatible property:
*
- * ibm,plb-pciex-440speA
- * ibm,plb-pciex-440speB
+ * ibm,plb-pciex-440spe
* ibm,plb-pciex-405ex
*
* Anything else will be rejected for now as they are all subtly
@@ -688,7 +696,7 @@ static int ppc440spe_pciex_init_port_hw(
mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
- if (of_device_is_compatible(port->node, "ibm,plb-pciex-440speA"))
+ if (ppc440spe_revA())
mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
@@ -767,7 +775,6 @@ static struct ppc4xx_pciex_hwops ppc440s
.setup_utl = ppc440speB_pciex_init_utl,
};
-
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
@@ -881,10 +888,12 @@ static int __init ppc4xx_pciex_check_cor
return 0;
#ifdef CONFIG_44x
- if (of_device_is_compatible(np, "ibm,plb-pciex-440speA"))
- ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
- else if (of_device_is_compatible(np, "ibm,plb-pciex-440speB"))
- ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+ if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) {
+ if (ppc440spe_revA())
+ ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+ else
+ ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+ }
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
^ permalink raw reply
* [PATCH 20/21] [POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This makes 4xx embedded platforms re-assign all PCI resources as we
pretty much never care about what the various firmwares have done on
these, it's generally not compatible with the way the kernel will map
the bridges.
We still need to also enable bus renumbering on some of them, but I
will do that from a separate patch after I've fixed 4xx PCIe to handle
all bus numbers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/platforms/40x/ep405.c | 2 ++
arch/powerpc/platforms/40x/kilauea.c | 3 +++
arch/powerpc/platforms/40x/walnut.c | 3 +++
arch/powerpc/platforms/44x/bamboo.c | 4 ++++
arch/powerpc/platforms/44x/ebony.c | 3 +++
arch/powerpc/platforms/44x/katmai.c | 3 +++
arch/powerpc/platforms/44x/sequoia.c | 5 ++++-
arch/powerpc/platforms/44x/taishan.c | 2 ++
8 files changed, 24 insertions(+), 1 deletion(-)
--- linux-merge.orig/arch/powerpc/platforms/44x/bamboo.c 2007-12-14 15:48:53.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/bamboo.c 2007-12-14 15:49:52.000000000 +1100
@@ -21,6 +21,8 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
#include "44x.h"
static struct of_device_id bamboo_of_bus[] = {
@@ -48,6 +50,8 @@ static int __init bamboo_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,bamboo"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/40x/ep405.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/ep405.c 2007-12-14 15:49:45.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/ep405.c 2007-12-14 15:49:52.000000000 +1100
@@ -101,6 +101,8 @@ static void __init ep405_setup_arch(void
{
/* Find & init the BCSR CPLD */
ep405_init_bcsr();
+
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
}
static int __init ep405_probe(void)
Index: linux-merge/arch/powerpc/platforms/40x/kilauea.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/kilauea.c 2007-12-14 15:48:53.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/kilauea.c 2007-12-14 15:49:52.000000000 +1100
@@ -19,6 +19,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
+#include <asm/pci-bridge.h>
static struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -45,6 +46,8 @@ static int __init kilauea_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/40x/walnut.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/walnut.c 2007-12-14 15:48:53.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/walnut.c 2007-12-14 15:49:52.000000000 +1100
@@ -24,6 +24,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
+#include <asm/pci-bridge.h>
static struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
@@ -51,6 +52,8 @@ static int __init walnut_probe(void)
if (!of_flat_dt_is_compatible(root, "ibm,walnut"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/44x/ebony.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/ebony.c 2007-12-14 15:48:53.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/ebony.c 2007-12-14 15:49:52.000000000 +1100
@@ -24,6 +24,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
+#include <asm/pci-bridge.h>
#include "44x.h"
@@ -55,6 +56,8 @@ static int __init ebony_probe(void)
if (!of_flat_dt_is_compatible(root, "ibm,ebony"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/44x/katmai.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/katmai.c 2007-12-14 15:49:51.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/katmai.c 2007-12-14 15:49:52.000000000 +1100
@@ -21,6 +21,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
+#include <asm/pci-bridge.h>
#include "44x.h"
@@ -49,6 +50,8 @@ static int __init katmai_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/44x/sequoia.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/sequoia.c 2007-12-14 15:48:53.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/sequoia.c 2007-12-14 15:49:52.000000000 +1100
@@ -21,7 +21,8 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-#include "44x.h"
+#include <asm/pci-bridge.h>
+
static struct of_device_id sequoia_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -48,6 +49,8 @@ static int __init sequoia_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
Index: linux-merge/arch/powerpc/platforms/44x/taishan.c
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/taishan.c 2007-12-14 15:49:46.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/taishan.c 2007-12-14 15:49:52.000000000 +1100
@@ -60,6 +60,8 @@ static int __init taishan_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
return 0;
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
return 1;
}
^ permalink raw reply
* [PATCH 19/21] [POWERPC] 4xx PCI-E Link setup improvements
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This improves the way the 4xx PCI-E code handles checking for a link
and adds explicit testing of CRS result codes on config space accesses.
This should make it more reliable.
Also, bridges with no link are now still created, though config space
accesses beyond the root complex are filtered. This is one step toward
eventually supporting hotplug.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/sysdev/ppc4xx_pci.c | 222 +++++++++++++++++++++++----------------
arch/powerpc/sysdev/ppc4xx_pci.h | 2
2 files changed, 134 insertions(+), 90 deletions(-)
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-18 11:21:49.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-19 15:45:19.000000000 +1100
@@ -16,6 +16,8 @@
*
*/
+#undef DEBUG
+
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
@@ -531,10 +533,13 @@ struct ppc4xx_pciex_port
struct device_node *node;
unsigned int index;
int endpoint;
+ int link;
+ int has_ibpre;
unsigned int sdr_base;
dcr_host_t dcrs;
struct resource cfg_space;
struct resource utl_regs;
+ void __iomem *utl_base;
};
static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
@@ -706,29 +711,44 @@ static int ppc440spe_pciex_init_port_hw(
return 0;
}
-static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ return ppc440spe_pciex_init_port_hw(port);
+}
+
+static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
- void __iomem *utl_base;
+ int rc = ppc440spe_pciex_init_port_hw(port);
+
+ port->has_ibpre = 1;
+
+ return rc;
+}
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
/* XXX Check what that value means... I hate magic */
dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
- utl_base = ioremap(port->utl_regs.start, 0x100);
- BUG_ON(utl_base == NULL);
-
/*
* Set buffer allocations and then assert VRB and TXE.
*/
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
- out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
- iounmap(utl_base);
+ return 0;
+}
+
+static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ /* Report CRS to the operating system */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000);
return 0;
}
@@ -736,14 +756,15 @@ static int ppc440speA_pciex_init_utl(str
static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
{
.core_init = ppc440spe_pciex_core_init,
- .port_init_hw = ppc440spe_pciex_init_port_hw,
+ .port_init_hw = ppc440speA_pciex_init_port_hw,
.setup_utl = ppc440speA_pciex_init_utl,
};
static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
{
.core_init = ppc440spe_pciex_core_init,
- .port_init_hw = ppc440spe_pciex_init_port_hw,
+ .port_init_hw = ppc440speB_pciex_init_port_hw,
+ .setup_utl = ppc440speB_pciex_init_utl,
};
@@ -821,30 +842,21 @@ static int ppc405ex_pciex_init_port_hw(s
static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
{
- void __iomem *utl_base;
-
dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
- utl_base = ioremap(port->utl_regs.start, 0x100);
- BUG_ON(utl_base == NULL);
-
/*
* Set buffer allocations and then assert VRB and TXE.
*/
- out_be32(utl_base + PEUTL_OUTTR, 0x02000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000);
- out_be32(utl_base + PEUTL_PBBSZ, 0x21000000);
- out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000);
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066);
-
- out_be32(utl_base + PEUTL_PBCTL, 0x0800000c);
- out_be32(utl_base + PEUTL_RCSTA,
- in_be32(utl_base + PEUTL_RCSTA) | 0x000040000);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
- iounmap(utl_base);
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000);
return 0;
}
@@ -926,17 +938,29 @@ static void __init ppc4xx_pciex_port_ini
dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
}
-static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port,
+ unsigned int sdr_offset,
+ unsigned int mask,
+ unsigned int value,
+ int timeout_ms)
{
- int attempts, rc = 0;
u32 val;
- /* Check if it's endpoint or root complex
- *
- * XXX Do we want to use the device-tree instead ? --BenH.
- */
- val = mfdcri(SDR0, port->sdr_base + PESDRn_DLPSET);
- port->endpoint = (((val >> 20) & 0xf) != PTYPE_ROOT_PORT);
+ while(timeout_ms--) {
+ val = mfdcri(SDR0, port->sdr_base + sdr_offset);
+ if ((val & mask) == value) {
+ pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n",
+ port->index, sdr_offset, timeout_ms, val);
+ return 0;
+ }
+ msleep(1);
+ }
+ return -1;
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+ int rc = 0;
/* Init HW */
if (ppc4xx_pciex_hwops->port_init_hw)
@@ -944,44 +968,40 @@ static int __init ppc4xx_pciex_port_init
if (rc != 0)
return rc;
- /*
- * Notice: the following delay has critical impact on device
- * initialization - if too short (<50ms) the link doesn't get up.
- *
- * XXX FIXME: There are various issues with that link up thingy,
- * we could just wait for the link with a timeout but Stefan says
- * some cards need more time even after the link is up. I'll
- * investigate. For now, we keep a fixed 1s delay.
- *
- * Ultimately, it should be made asynchronous so all ports are
- * brought up simultaneously though.
- */
- printk(KERN_INFO "PCIE%d: Waiting for link to go up...\n",
+ printk(KERN_INFO "PCIE%d: Checking link...\n",
port->index);
- msleep(1000);
-
- /*
- * Check that we exited the reset state properly
- */
- val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS);
- if (val & (1 << 20)) {
- printk(KERN_WARNING "PCIE%d: PGRST failed %08x\n",
- port->index, val);
- return -1;
- }
- /*
- * Verify link is up
- */
- val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
- if (!(val & 0x00001000)) {
- printk(KERN_INFO "PCIE%d: link is not up !\n",
+ /* Wait for reset to complete */
+ if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) {
+ printk(KERN_WARNING "PCIE%d: PGRST failed\n",
port->index);
return -1;
}
- printk(KERN_INFO "PCIE%d: link is up !\n",
- port->index);
+ /* Check for card presence detect if supported, if not, just wait for
+ * link unconditionally.
+ *
+ * note that we don't fail if there is no link, we just filter out
+ * config space accesses. That way, it will be easier to implement
+ * hotplug later on.
+ */
+ if (!port->has_ibpre ||
+ !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+ 1 << 28, 1 << 28, 100)) {
+ printk(KERN_INFO
+ "PCIE%d: Device detected, waiting for link...\n",
+ port->index);
+ if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP,
+ 0x1000, 0x1000, 2000))
+ printk(KERN_WARNING
+ "PCIE%d: Link up failed\n", port->index);
+ else {
+ printk(KERN_INFO
+ "PCIE%d: link is up !\n", port->index);
+ port->link = 1;
+ }
+ } else
+ printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
/*
* Initialize mapping: disable all regions and configure
@@ -990,12 +1010,13 @@ static int __init ppc4xx_pciex_port_init
ppc4xx_pciex_port_init_mapping(port);
/*
- * Setup UTL registers - but only on revA!
- * We use default settings for revB chip.
- *
- * To be reworked. We may also be able to move that to
- * before the link wait
- * --BenH.
+ * Map UTL
+ */
+ port->utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(port->utl_base == NULL);
+
+ /*
+ * Setup UTL registers --BenH.
*/
if (ppc4xx_pciex_hwops->setup_utl)
ppc4xx_pciex_hwops->setup_utl(port);
@@ -1003,15 +1024,13 @@ static int __init ppc4xx_pciex_port_init
/*
* Check for VC0 active and assert RDY.
*/
- attempts = 10;
- while (!(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS) & (1 << 16))) {
- if (!(attempts--)) {
- printk(KERN_INFO "PCIE%d: VC0 not active\n",
- port->index);
- return -1;
- }
- msleep(1000);
+ if (port->link &&
+ ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+ 1 << 16, 1 << 16, 5000)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+ port->link = 0;
}
+
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
msleep(100);
@@ -1048,6 +1067,10 @@ static int ppc4xx_pciex_validate_bdf(str
PCI_SLOT(devfn) != 0)
return PCIBIOS_DEVICE_NOT_FOUND;
+ /* Check if we have a link */
+ if ((bus->number != port->hose->first_busno) && !port->link)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
return 0;
}
@@ -1092,6 +1115,9 @@ static int ppc4xx_pciex_read_config(stru
gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+ /* Make sure no CRS is recorded */
+ out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000);
+
switch (len) {
case 1:
*val = in_8((u8 *)(addr + offset));
@@ -1109,6 +1135,14 @@ static int ppc4xx_pciex_read_config(stru
bus->number, hose->first_busno, hose->last_busno,
devfn, offset, len, addr + offset, *val);
+ /* Check for CRS (440SPe rev B does that for us but heh ..) */
+ if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) {
+ pr_debug("Got CRS !\n");
+ if (len != 4 || offset != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ *val = 0xffff0001;
+ }
+
dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
return PCIBIOS_SUCCESSFUL;
@@ -1278,8 +1312,11 @@ static void __init ppc4xx_pciex_port_set
void __iomem *mbase = NULL, *cfg_data = NULL;
/* XXX FIXME: Handle endpoint mode properly */
- if (port->endpoint)
+ if (port->endpoint) {
+ printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n",
+ port->index);
return;
+ }
/* Check if primary bridge */
if (of_get_property(port->node, "primary", NULL))
@@ -1424,6 +1461,9 @@ static void __init ppc4xx_probe_pciex_br
}
port->sdr_base = *pval;
+ /* XXX Currently, we only support root complex mode */
+ port->endpoint = 0;
+
/* Fetch config space registers address */
if (of_address_to_resource(np, 0, &port->cfg_space)) {
printk(KERN_ERR "%s: Can't get PCI-E config space !",
@@ -1447,8 +1487,10 @@ static void __init ppc4xx_probe_pciex_br
port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
/* Initialize the port specific registers */
- if (ppc4xx_pciex_port_init(port))
+ if (ppc4xx_pciex_port_init(port)) {
+ printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index);
return;
+ }
/* Setup the linux hose data structure */
ppc4xx_pciex_port_setup_hose(port);
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h
===================================================================
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-18 11:21:49.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-18 11:21:56.000000000 +1100
@@ -330,6 +330,8 @@
/*
* Config space register offsets
*/
+#define PECFG_ECRTCTL 0x074
+
#define PECFG_BAR0LMPA 0x210
#define PECFG_BAR0HMPA 0x214
#define PECFG_BAR1MPA 0x218
^ permalink raw reply
* [PATCH 18/21] [POWERPC] bamboo: remove bogus "ranges" property in EBC node
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This removes a bogus empty "ranges" property in the EBC device node
of the Bamboo board device-tree.
The "ranges" property will be created by the boot wrapper, there is
no need to have an empty property there, and that causes recent
dtc to complain.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/bamboo.dts | 1 -
1 file changed, 1 deletion(-)
--- linux-merge.orig/arch/powerpc/boot/dts/bamboo.dts 2007-12-21 14:35:23.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/bamboo.dts 2007-12-21 14:35:25.000000000 +1100
@@ -126,7 +126,6 @@
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- ranges;
interrupts = <5 1>;
interrupt-parent = <&UIC1>;
};
^ permalink raw reply
* [PATCH 17/21] [POWERPC] Base support for 440SPe "Katmai" eval board
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds base support for the Katmai board, including PCI-X and
PCI-Express (but no RTC, nvram, etc... yet).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
---
As for Taishan, the bootwrapper code can be simplified. In fact,
we probably don't need to probe clocks & memsize off the chip and
just trust what uboot tells us.
arch/powerpc/boot/Makefile | 5
arch/powerpc/boot/cuboot-katmai.c | 56 ++
arch/powerpc/boot/dts/katmai.dts | 392 ++++++++++++++++
arch/powerpc/configs/katmai_defconfig | 789 ++++++++++++++++++++++++++++++++++
arch/powerpc/platforms/44x/Kconfig | 14
arch/powerpc/platforms/44x/Makefile | 3
arch/powerpc/platforms/44x/katmai.c | 63 ++
7 files changed, 1320 insertions(+), 2 deletions(-)
--- linux-merge.orig/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:20:11.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:21:23.000000000 +1100
@@ -34,6 +34,16 @@ config TAISHAN
This option enables support for the AMCC PPC440GX "Taishan"
evaluation board.
+config KATMAI
+ bool "Katmai"
+ depends on 44x
+ default n
+ select 440SPe
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC440SPe evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
@@ -78,6 +88,10 @@ config 440GX
config 440SP
bool
+config 440SPe
+ select IBM_NEW_EMAC_EMAC4
+ bool
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
Index: linux-merge/arch/powerpc/platforms/44x/Makefile
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/Makefile 2007-12-21 14:20:04.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Makefile 2007-12-21 14:21:23.000000000 +1100
@@ -1,5 +1,6 @@
obj-$(CONFIG_44x) := misc_44x.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_TAISHAN) += taishan.o
-obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
+obj-$(CONFIG_KATMAI) += katmai.o
Index: linux-merge/arch/powerpc/boot/dts/katmai.dts
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/dts/katmai.dts 2007-12-21 14:34:45.000000000 +1100
@@ -0,0 +1,392 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,katmai";
+ compatible = "amcc,katmai";
+ dcr-parent = <&/cpus/PowerPC,440SPe@0>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,440SPe@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <20000>;
+ d-cache-size = <20000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440spe";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440spe";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
+ /*RXEOB*/ 1 &UIC1 7 4
+ /*SERR*/ 2 &UIC1 1 4
+ /*TXDE*/ 3 &UIC1 2 4
+ /*RXDE*/ 4 &UIC1 3 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <00000000 4 e0000000 20000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@10000200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000200 8>;
+ virtual-reg = <a0000200>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@10000300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000300 8>;
+ virtual-reg = <a0000300>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+
+ UART2: serial@10000600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000600 8>;
+ virtual-reg = <a0000600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <5 4>;
+ };
+
+ IIC0: i2c@10000400 {
+ device_type = "i2c";
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <10000400 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@10000500 {
+ device_type = "i2c";
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <10000500 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ EMAC0: ethernet@10000800 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-440spe", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <10000800 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "gmii";
+ phy-map = <00000000>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0 f>;
+
+ /*
+ * On Katmai, the following PCI-X interrupts signals
+ * have to be enabled via jumpers (only INTA is
+ * enabled per default):
+ *
+ * INTB: J3: 1-2
+ * INTC: J2: 1-2
+ * INTD: J1: 1-2
+ */
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 1 &UIC1 14 8
+ 0800 0 0 2 &UIC1 13 8
+ 0800 0 0 3 &UIC1 12 8
+ 0800 0 0 4 &UIC1 11 8
+ >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 10000000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <10 1f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 0 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 1 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 2 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 10001000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <20 2f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 4 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 5 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 6 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+ };
+
+ PCIE2: pciex@d40000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <2>; /* port number */
+ reg = <d 40000000 20000000 /* Config space access */
+ c 10002000 00001000>; /* Registers */
+ dcr-reg = <140 020>;
+ sdr-base = <370>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80020000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <30 3f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 8 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 9 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 a 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@10000200";
+ };
+};
Index: linux-merge/arch/powerpc/platforms/44x/katmai.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/platforms/44x/katmai.c 2007-12-21 14:34:33.000000000 +1100
@@ -0,0 +1,63 @@
+/*
+ * Katmai board specific routines
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ *
+ * Based on the Bamboo code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+
+#include "44x.h"
+
+static struct of_device_id katmai_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init katmai_device_probe(void)
+{
+ if (!machine_is(katmai))
+ return 0;
+
+ of_platform_bus_probe(NULL, katmai_of_bus, NULL);
+
+ return 0;
+}
+device_initcall(katmai_device_probe);
+
+static int __init katmai_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(katmai) {
+ .name = "Katmai",
+ .probe = katmai_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc44x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
Index: linux-merge/arch/powerpc/boot/cuboot-katmai.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/cuboot-katmai.c 2007-12-21 14:21:23.000000000 +1100
@@ -0,0 +1,56 @@
+/*
+ * Old U-boot compatibility for Katmai
+ *
+ * Author: Hugh Blemings <hugh@au.ibm.com>
+ *
+ * Copyright 2007 Hugh Blemings, IBM Corporation.
+ * Based on cuboot-ebony.c which is:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(4096);
+
+static void katmai_fixups(void)
+{
+ unsigned long sysclk = 33333000;
+
+ /* 440SP Clock logic is all but identical to 440GX
+ * so we just use that code for now at least
+ */
+ ibm440spe_fixup_clocks(sysclk, 6 * 1843200, 0);
+
+ ibm440spe_fixup_memsize();
+
+ dt_fixup_mac_address(0, bd.bi_enetaddr);
+
+ ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+
+ platform_ops.fixups = katmai_fixups;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
Index: linux-merge/arch/powerpc/boot/Makefile
===================================================================
--- linux-merge.orig/arch/powerpc/boot/Makefile 2007-12-21 14:20:04.000000000 +1100
+++ linux-merge/arch/powerpc/boot/Makefile 2007-12-21 14:21:23.000000000 +1100
@@ -38,6 +38,7 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
@@ -60,7 +61,8 @@ src-plat := of.c cuboot-52xx.c cuboot-83
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
- fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c
+ fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
+ cuboot-katmai.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -202,6 +204,7 @@ image-$(CONFIG_BAMBOO) += treeImage.ba
image-$(CONFIG_SEQUOIA) += cuImage.sequoia
image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_TAISHAN) += cuImage.taishan
+image-$(CONFIG_KATMAI) += cuImage.katmai
endif
# For 32-bit powermacs, build the COFF and miboot images
Index: linux-merge/arch/powerpc/configs/katmai_defconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/configs/katmai_defconfig 2007-12-21 14:21:23.000000000 +1100
@@ -0,0 +1,789 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc4
+# Tue Dec 11 17:07:18 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+CONFIG_KATMAI=y
+CONFIG_440SPe=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="katmai.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
^ permalink raw reply
* [PATCH 16/21] [POWERPC] Rework 4xx clock probing in boot wrapper
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This reworks the boot wrapper library function that probes
the chip clocks. Better separate the base function that is
used on 440GX,SPe,EP,... from the uart fixups as those need
different device-tree path on different processors.
Also, rework the function itself based on the arch/ppc code
from Eugene Surovegin which I find more readable, and which
handles one more bypass case. Also handle the subtle difference
between 440EP/EPx and 440SPe/GX, on the former, PerClk is derived
from the PLB clock while on the later, it's derived from the OPB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/4xx.c | 272 +++++++++++++++++++++++++++----------
arch/powerpc/boot/4xx.h | 11 +
arch/powerpc/boot/bamboo.c | 2
arch/powerpc/boot/cuboot-sequoia.c | 2
arch/powerpc/boot/cuboot-taishan.c | 4
arch/powerpc/boot/dcr.h | 17 ++
arch/powerpc/boot/ebony.c | 60 --------
7 files changed, 233 insertions(+), 135 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/4xx.c 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.c 2007-12-14 15:49:50.000000000 +1100
@@ -275,89 +275,225 @@ void ibm4xx_fixup_ebc_ranges(const char
setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
}
-#define SPRN_CCR1 0x378
-void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+/* Calculate 440GP clocks */
+void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
{
- u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
- u32 reg;
- u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
-
- mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x000F0000) >> 16;
- fwdva = tmp ? tmp : 16;
- tmp = (reg & 0x00000700) >> 8;
- fwdvb = tmp ? tmp : 8;
- tmp = (reg & 0x1F000000) >> 24;
- fbdv = tmp ? tmp : 32;
- lfbdv = (reg & 0x0000007F);
-
- mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x03000000) >> 24;
- opbdv0 = tmp ? tmp : 4;
-
- mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x07000000) >> 24;
- perdv0 = tmp ? tmp : 8;
-
- mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x07000000) >> 24;
- prbdv0 = tmp ? tmp : 8;
-
- mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x03000000) >> 24;
- spcid0 = tmp ? tmp : 4;
-
- /* Calculate M */
- mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
- reg = mfdcr(DCRN_CPR0_DATA);
- tmp = (reg & 0x03000000) >> 24;
- if (tmp == 0) { /* PLL output */
- tmp = (reg & 0x20000000) >> 29;
- if (!tmp) /* PLLOUTA */
- m = fbdv * lfbdv * fwdva;
+ u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
+ u32 cr0 = mfdcr(DCRN_CPC0_CR0);
+ u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
+ u32 opdv = CPC0_SYS0_OPDV(sys0);
+ u32 epdv = CPC0_SYS0_EPDV(sys0);
+
+ if (sys0 & CPC0_SYS0_BYPASS) {
+ /* Bypass system PLL */
+ cpu = plb = sys_clk;
+ } else {
+ if (sys0 & CPC0_SYS0_EXTSL)
+ /* PerClk */
+ m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
else
- m = fbdv * lfbdv * fwdvb;
+ /* CPU clock */
+ m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
+ cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0);
+ plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0);
}
- else if (tmp == 1) /* CPU output */
- m = fbdv * fwdva;
+
+ opb = plb / opdv;
+ ebc = opb / epdv;
+
+ /* FIXME: Check if this is for all 440GP, or just Ebony */
+ if ((mfpvr() & 0xf0000fff) == 0x40000440)
+ /* Rev. B 440GP, use external system clock */
+ tb = sys_clk;
else
- m = perdv0 * opbdv0 * fwdvb;
+ /* Rev. C 440GP, errata force us to use internal clock */
+ tb = cpu;
- vco = (m * sysclk) + (m >> 1);
- cpu = vco / fwdva;
- plb = vco / fwdvb / prbdv0;
- opb = plb / opbdv0;
- ebc = plb / perdv0;
+ if (cr0 & CPC0_CR0_U0EC)
+ /* External UART clock */
+ uart0 = ser_clk;
+ else
+ /* Internal UART clock */
+ uart0 = plb / CPC0_CR0_UDIV(cr0);
- /* FIXME */
- uart0 = ser_clk;
+ if (cr0 & CPC0_CR0_U1EC)
+ /* External UART clock */
+ uart1 = ser_clk;
+ else
+ /* Internal UART clock */
+ uart1 = plb / CPC0_CR0_UDIV(cr0);
+
+ printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
+ (sys_clk + 500000) / 1000000, sys_clk);
+
+ dt_fixup_cpu_clocks(cpu, tb, 0);
+
+ dt_fixup_clock("/plb", plb);
+ dt_fixup_clock("/plb/opb", opb);
+ dt_fixup_clock("/plb/opb/ebc", ebc);
+ dt_fixup_clock("/plb/opb/serial@40000200", uart0);
+ dt_fixup_clock("/plb/opb/serial@40000300", uart1);
+}
+
+#define SPRN_CCR1 0x378
+
+static inline u32 __fix_zero(u32 v, u32 def)
+{
+ return v ? v : def;
+}
+
+static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk,
+ unsigned int tmr_clk,
+ int per_clk_from_opb)
+{
+ /* PLL config */
+ u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
+ u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
+
+ /* Dividers */
+ u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32);
+ u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16);
+ u32 fwdvb = __fix_zero((plld >> 8) & 7, 8);
+ u32 lfbdv = __fix_zero(plld & 0x3f, 64);
+ u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8);
+ u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8);
+ u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4);
+ u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4);
+
+ /* Input clocks for primary dividers */
+ u32 clk_a, clk_b;
+
+ /* Resulting clocks */
+ u32 cpu, plb, opb, ebc, vco;
+
+ /* Timebase */
+ u32 ccr1, tb = tmr_clk;
+
+ if (pllc & 0x40000000) {
+ u32 m;
+
+ /* Feedback path */
+ switch ((pllc >> 24) & 7) {
+ case 0:
+ /* PLLOUTx */
+ m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
+ break;
+ case 1:
+ /* CPU */
+ m = fwdva * pradv0;
+ break;
+ case 5:
+ /* PERClk */
+ m = fwdvb * prbdv0 * opbdv0 * perdv0;
+ break;
+ default:
+ printf("WARNING ! Invalid PLL feedback source !\n");
+ goto bypass;
+ }
+ m *= fbdv;
+ vco = sys_clk * m;
+ clk_a = vco / fwdva;
+ clk_b = vco / fwdvb;
+ } else {
+bypass:
+ /* Bypass system PLL */
+ vco = 0;
+ clk_a = clk_b = sys_clk;
+ }
+
+ cpu = clk_a / pradv0;
+ plb = clk_b / prbdv0;
+ opb = plb / opbdv0;
+ ebc = (per_clk_from_opb ? opb : plb) / perdv0;
/* Figure out timebase. Either CPU or default TmrClk */
- asm volatile (
- "mfspr %0,%1\n"
- :
- "=&r"(reg) : "i"(SPRN_CCR1));
- if (reg & 0x0080)
- tb = 25000000; /* TmrClk is 25MHz */
- else
+ ccr1 = mfspr(SPRN_CCR1);
+
+ /* If passed a 0 tmr_clk, force CPU clock */
+ if (tb == 0) {
+ ccr1 &= ~0x80u;
+ mtspr(SPRN_CCR1, ccr1);
+ }
+ if ((ccr1 & 0x0080) == 0)
tb = cpu;
dt_fixup_cpu_clocks(cpu, tb, 0);
dt_fixup_clock("/plb", plb);
dt_fixup_clock("/plb/opb", opb);
dt_fixup_clock("/plb/opb/ebc", ebc);
- dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
- dt_fixup_clock("/plb/opb/serial@ef600400", uart0);
- dt_fixup_clock("/plb/opb/serial@ef600500", uart0);
- dt_fixup_clock("/plb/opb/serial@ef600600", uart0);
+
+ return plb;
+}
+
+static void eplike_fixup_uart_clk(int index, const char *path,
+ unsigned int ser_clk,
+ unsigned int plb_clk)
+{
+ unsigned int sdr;
+ unsigned int clock;
+
+ switch (index) {
+ case 0:
+ sdr = SDR0_READ(DCRN_SDR0_UART0);
+ break;
+ case 1:
+ sdr = SDR0_READ(DCRN_SDR0_UART1);
+ break;
+ case 2:
+ sdr = SDR0_READ(DCRN_SDR0_UART2);
+ break;
+ case 3:
+ sdr = SDR0_READ(DCRN_SDR0_UART3);
+ break;
+ default:
+ return;
+ }
+
+ if (sdr & 0x00800000u)
+ clock = ser_clk;
+ else
+ clock = plb_clk / __fix_zero(sdr & 0xff, 256);
+
+ dt_fixup_clock(path, clock);
+}
+
+void ibm440ep_fixup_clocks(unsigned int sys_clk,
+ unsigned int ser_clk,
+ unsigned int tmr_clk)
+{
+ unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
+
+ /* serial clocks beed fixup based on int/ext */
+ eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk);
+}
+
+void ibm440gx_fixup_clocks(unsigned int sys_clk,
+ unsigned int ser_clk,
+ unsigned int tmr_clk)
+{
+ unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
+
+ /* serial clocks beed fixup based on int/ext */
+ eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
+}
+
+void ibm440spe_fixup_clocks(unsigned int sys_clk,
+ unsigned int ser_clk,
+ unsigned int tmr_clk)
+{
+ unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
+
+ /* serial clocks beed fixup based on int/ext */
+ eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
+ eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
}
-void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
{
u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
@@ -374,7 +510,7 @@ void ibm405gp_fixup_clocks(unsigned int
m = fwdv * fbdv * cbdv;
- cpu = sysclk * m / fwdv;
+ cpu = sys_clk * m / fwdv;
plb = cpu / cbdv;
opb = plb / opdv;
ebc = plb / epdv;
Index: linux-merge/arch/powerpc/boot/4xx.h
===================================================================
--- linux-merge.orig/arch/powerpc/boot/4xx.h 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.h 2007-12-14 15:49:50.000000000 +1100
@@ -18,7 +18,14 @@ void ibm44x_dbcr_reset(void);
void ibm40x_dbcr_reset(void);
void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1);
void ibm4xx_fixup_ebc_ranges(const char *ebc);
-void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk);
-void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk);
+
+void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
+void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
+void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+ unsigned int tmr_clk);
+void ibm440gx_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+ unsigned int tmr_clk);
+void ibm440spe_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
+ unsigned int tmr_clk);
#endif /* _POWERPC_BOOT_4XX_H_ */
Index: linux-merge/arch/powerpc/boot/ebony.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/ebony.c 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/ebony.c 2007-12-14 15:49:50.000000000 +1100
@@ -31,66 +31,6 @@
static u8 *ebony_mac0, *ebony_mac1;
-/* Calculate 440GP clocks */
-void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
-{
- u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
- u32 cr0 = mfdcr(DCRN_CPC0_CR0);
- u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
- u32 opdv = CPC0_SYS0_OPDV(sys0);
- u32 epdv = CPC0_SYS0_EPDV(sys0);
-
- if (sys0 & CPC0_SYS0_BYPASS) {
- /* Bypass system PLL */
- cpu = plb = sysclk;
- } else {
- if (sys0 & CPC0_SYS0_EXTSL)
- /* PerClk */
- m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
- else
- /* CPU clock */
- m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
- cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0);
- plb = sysclk * m / CPC0_SYS0_FWDVB(sys0);
- }
-
- opb = plb / opdv;
- ebc = opb / epdv;
-
- /* FIXME: Check if this is for all 440GP, or just Ebony */
- if ((mfpvr() & 0xf0000fff) == 0x40000440)
- /* Rev. B 440GP, use external system clock */
- tb = sysclk;
- else
- /* Rev. C 440GP, errata force us to use internal clock */
- tb = cpu;
-
- if (cr0 & CPC0_CR0_U0EC)
- /* External UART clock */
- uart0 = ser_clk;
- else
- /* Internal UART clock */
- uart0 = plb / CPC0_CR0_UDIV(cr0);
-
- if (cr0 & CPC0_CR0_U1EC)
- /* External UART clock */
- uart1 = ser_clk;
- else
- /* Internal UART clock */
- uart1 = plb / CPC0_CR0_UDIV(cr0);
-
- printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
- (sysclk + 500000) / 1000000, sysclk);
-
- dt_fixup_cpu_clocks(cpu, tb, 0);
-
- dt_fixup_clock("/plb", plb);
- dt_fixup_clock("/plb/opb", opb);
- dt_fixup_clock("/plb/opb/ebc", ebc);
- dt_fixup_clock("/plb/opb/serial@40000200", uart0);
- dt_fixup_clock("/plb/opb/serial@40000300", uart1);
-}
-
#define EBONY_FPGA_PATH "/plb/opb/ebc/fpga"
#define EBONY_FPGA_FLASH_SEL 0x01
#define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash"
Index: linux-merge/arch/powerpc/boot/dcr.h
===================================================================
--- linux-merge.orig/arch/powerpc/boot/dcr.h 2007-12-14 15:49:49.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dcr.h 2007-12-14 15:49:50.000000000 +1100
@@ -160,6 +160,23 @@ static const unsigned long sdram_bxcr[]
#define DCRN_CPR0_PERD 0x0e0
#define DCRN_CPR0_MALD 0x100
+#define DCRN_SDR0_CONFIG_ADDR 0xe
+#define DCRN_SDR0_CONFIG_DATA 0xf
+
+/* SDR read/write helper macros */
+#define SDR0_READ(offset) ({\
+ mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+ mfdcr(DCRN_SDR0_CONFIG_DATA); })
+#define SDR0_WRITE(offset, data) ({\
+ mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+ mtdcr(DCRN_SDR0_CONFIG_DATA, data); })
+
+#define DCRN_SDR0_UART0 0x0120
+#define DCRN_SDR0_UART1 0x0121
+#define DCRN_SDR0_UART2 0x0122
+#define DCRN_SDR0_UART3 0x0123
+
+
/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */
#define DCRN_CPR0_CFGADDR 0xc
Index: linux-merge/arch/powerpc/boot/bamboo.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/bamboo.c 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/bamboo.c 2007-12-14 15:49:50.000000000 +1100
@@ -30,7 +30,7 @@ static void bamboo_fixups(void)
{
unsigned long sysclk = 33333333;
- ibm440ep_fixup_clocks(sysclk, 11059200);
+ ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
Index: linux-merge/arch/powerpc/boot/cuboot-sequoia.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/cuboot-sequoia.c 2007-12-14 15:48:54.000000000 +1100
+++ linux-merge/arch/powerpc/boot/cuboot-sequoia.c 2007-12-14 15:49:50.000000000 +1100
@@ -39,7 +39,7 @@ static void sequoia_fixups(void)
{
unsigned long sysclk = 33333333;
- ibm440ep_fixup_clocks(sysclk, 11059200);
+ ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
Index: linux-merge/arch/powerpc/boot/cuboot-taishan.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/cuboot-taishan.c 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/cuboot-taishan.c 2007-12-14 15:49:50.000000000 +1100
@@ -34,9 +34,7 @@ static void taishan_fixups(void)
registers */
unsigned long sysclk = 33000000;
- /* 440EP Clock logic is all but identical to 440GX
- so we just use that code for now at least */
- ibm440ep_fixup_clocks(sysclk, 6 * 1843200);
+ ibm440gx_fixup_clocks(sysclk, 6 * 1843200, 25000000);
ibm4xx_sdram_fixup_memsize();
^ permalink raw reply
* [PATCH 15/21] [POWERPC] Adds 44x CPR0 accessors to boot wrapper
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds macros to the boot wrapper to access the CPR
registers from the boot wrappers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dcr.h | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- linux-merge.orig/arch/powerpc/boot/dcr.h 2007-12-14 15:49:48.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dcr.h 2007-12-14 15:49:49.000000000 +1100
@@ -147,4 +147,31 @@ static const unsigned long sdram_bxcr[]
#define DCRN_405_CPC0_CR0 0xb1
#define DCRN_405_CPC0_CR1 0xb2
+
+/* 440GX Clock control etc */
+
+
+#define DCRN_CPR0_CLKUPD 0x020
+#define DCRN_CPR0_PLLC 0x040
+#define DCRN_CPR0_PLLD 0x060
+#define DCRN_CPR0_PRIMAD 0x080
+#define DCRN_CPR0_PRIMBD 0x0a0
+#define DCRN_CPR0_OPBD 0x0c0
+#define DCRN_CPR0_PERD 0x0e0
+#define DCRN_CPR0_MALD 0x100
+
+/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */
+
+#define DCRN_CPR0_CFGADDR 0xc
+#define DCRN_CPR0_CFGDATA 0xd
+
+#define CPR0_READ(offset) ({\
+ mtdcr(DCRN_CPR0_CFGADDR, offset); \
+ mfdcr(DCRN_CPR0_CFGDATA); })
+#define CPR0_WRITE(offset, data) ({\
+ mtdcr(DCRN_CPR0_CFGADDR, offset); \
+ mtdcr(DCRN_CPR0_CFGDATA, data); })
+
+
+
#endif /* _PPC_BOOT_DCR_H_ */
^ permalink raw reply
* [PATCH 14/21] [POWERPC] Add mfspr/mtspr inline macros to 4xx bootwrapper
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
The 4xx bootwrapper occasionally needs to access SPR registers,
this adds mfspr/mtspr wrappers to it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
===================================================================
arch/powerpc/boot/reg.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- linux-merge.orig/arch/powerpc/boot/reg.h 2007-12-14 15:48:54.000000000 +1100
+++ linux-merge/arch/powerpc/boot/reg.h 2007-12-14 15:49:49.000000000 +1100
@@ -16,6 +16,14 @@ static inline u32 mfpvr(void)
return pvr;
}
+#define __stringify_1(x) #x
+#define __stringify(x) __stringify_1(x)
+
+#define mfspr(rn) ({unsigned long rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval; })
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
register void *__stack_pointer asm("r1");
#define get_sp() (__stack_pointer)
^ permalink raw reply
* [PATCH 13/21] [POWERPC] Adds decoding of 440SPE memory size to boot wrapper library
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds a function to the bootwrapper 4xx library to decode memory
size on 440SPE processors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/4xx.c | 85 +++++++++++++++++++++++++++++-------
arch/powerpc/boot/4xx.h | 3 -
arch/powerpc/boot/bamboo.c | 2
arch/powerpc/boot/cuboot-taishan.c | 2
arch/powerpc/boot/dcr.h | 10 +++-
arch/powerpc/boot/ebony.c | 2
arch/powerpc/boot/treeboot-walnut.c | 2
7 files changed, 85 insertions(+), 21 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/4xx.c 2007-12-21 14:19:46.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.c 2007-12-21 14:21:16.000000000 +1100
@@ -22,16 +22,14 @@
#include "dcr.h"
/* Read the 4xx SDRAM controller to get size of system memory. */
-void ibm4xx_fixup_memsize(void)
+void ibm4xx_sdram_fixup_memsize(void)
{
int i;
unsigned long memsize, bank_config;
memsize = 0;
for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
- mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]);
- bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
+ bank_config = SDRAM0_READ(sdram_bxcr[i]);
if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
}
@@ -39,6 +37,69 @@ void ibm4xx_fixup_memsize(void)
dt_fixup_memory(0, memsize);
}
+/* Read the 440SPe MQ controller to get size of system memory. */
+#define DCRN_MQ0_B0BAS 0x40
+#define DCRN_MQ0_B1BAS 0x41
+#define DCRN_MQ0_B2BAS 0x42
+#define DCRN_MQ0_B3BAS 0x43
+
+static u64 ibm440spe_decode_bas(u32 bas)
+{
+ u64 base = ((u64)(bas & 0xFFE00000u)) << 2;
+
+ /* open coded because I'm paranoid about invalid values */
+ switch ((bas >> 4) & 0xFFF) {
+ case 0:
+ return 0;
+ case 0xffc:
+ return base + 0x000800000ull;
+ case 0xff8:
+ return base + 0x001000000ull;
+ case 0xff0:
+ return base + 0x002000000ull;
+ case 0xfe0:
+ return base + 0x004000000ull;
+ case 0xfc0:
+ return base + 0x008000000ull;
+ case 0xf80:
+ return base + 0x010000000ull;
+ case 0xf00:
+ return base + 0x020000000ull;
+ case 0xe00:
+ return base + 0x040000000ull;
+ case 0xc00:
+ return base + 0x080000000ull;
+ case 0x800:
+ return base + 0x100000000ull;
+ }
+ printf("Memory BAS value 0x%08x unsupported !\n", bas);
+ return 0;
+}
+
+void ibm440spe_fixup_memsize(void)
+{
+ u64 banktop, memsize = 0;
+
+ /* Ultimately, we should directly construct the memory node
+ * so we are able to handle holes in the memory address space
+ */
+ banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS));
+ if (banktop > memsize)
+ memsize = banktop;
+ banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS));
+ if (banktop > memsize)
+ memsize = banktop;
+ banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS));
+ if (banktop > memsize)
+ memsize = banktop;
+ banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS));
+ if (banktop > memsize)
+ memsize = banktop;
+
+ dt_fixup_memory(0, memsize);
+}
+
+
/* 4xx DDR1/2 Denali memory controller support */
/* DDR0 registers */
#define DDR0_02 2
@@ -77,19 +138,13 @@ void ibm4xx_fixup_memsize(void)
#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
-static inline u32 mfdcr_sdram0(u32 reg)
-{
- mtdcr(DCRN_SDRAM0_CFGADDR, reg);
- return mfdcr(DCRN_SDRAM0_CFGDATA);
-}
-
void ibm4xx_denali_fixup_memsize(void)
{
u32 val, max_cs, max_col, max_row;
u32 cs, col, row, bank, dpath;
unsigned long memsize;
- val = mfdcr_sdram0(DDR0_02);
+ val = SDRAM0_READ(DDR0_02);
if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
fatal("DDR controller is not initialized\n");
@@ -99,7 +154,7 @@ void ibm4xx_denali_fixup_memsize(void)
max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
/* get CS value */
- val = mfdcr_sdram0(DDR0_10);
+ val = SDRAM0_READ(DDR0_10);
val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
cs = 0;
@@ -115,7 +170,7 @@ void ibm4xx_denali_fixup_memsize(void)
fatal("DDR wrong CS configuration\n");
/* get data path bytes */
- val = mfdcr_sdram0(DDR0_14);
+ val = SDRAM0_READ(DDR0_14);
if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
dpath = 8; /* 64 bits */
@@ -123,7 +178,7 @@ void ibm4xx_denali_fixup_memsize(void)
dpath = 4; /* 32 bits */
/* get address pins (rows) */
- val = mfdcr_sdram0(DDR0_42);
+ val = SDRAM0_READ(DDR0_42);
row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
if (row > max_row)
@@ -131,7 +186,7 @@ void ibm4xx_denali_fixup_memsize(void)
row = max_row - row;
/* get collomn size and banks */
- val = mfdcr_sdram0(DDR0_43);
+ val = SDRAM0_READ(DDR0_43);
col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
if (col > max_col)
Index: linux-merge/arch/powerpc/boot/4xx.h
===================================================================
--- linux-merge.orig/arch/powerpc/boot/4xx.h 2007-12-21 14:19:46.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.h 2007-12-21 14:20:19.000000000 +1100
@@ -11,7 +11,8 @@
#ifndef _POWERPC_BOOT_4XX_H_
#define _POWERPC_BOOT_4XX_H_
-void ibm4xx_fixup_memsize(void);
+void ibm4xx_sdram_fixup_memsize(void);
+void ibm440spe_fixup_memsize(void);
void ibm4xx_denali_fixup_memsize(void);
void ibm44x_dbcr_reset(void);
void ibm40x_dbcr_reset(void);
Index: linux-merge/arch/powerpc/boot/bamboo.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/bamboo.c 2007-12-20 11:32:10.000000000 +1100
+++ linux-merge/arch/powerpc/boot/bamboo.c 2007-12-21 14:20:19.000000000 +1100
@@ -31,7 +31,7 @@ static void bamboo_fixups(void)
unsigned long sysclk = 33333333;
ibm440ep_fixup_clocks(sysclk, 11059200);
- ibm4xx_fixup_memsize();
+ ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
}
Index: linux-merge/arch/powerpc/boot/dcr.h
===================================================================
--- linux-merge.orig/arch/powerpc/boot/dcr.h 2007-10-15 11:19:35.000000000 +1000
+++ linux-merge/arch/powerpc/boot/dcr.h 2007-12-21 14:20:19.000000000 +1100
@@ -14,12 +14,20 @@
#define DCRN_SDRAM0_CFGADDR 0x010
#define DCRN_SDRAM0_CFGDATA 0x011
+#define SDRAM0_READ(offset) ({\
+ mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+ mfdcr(DCRN_SDRAM0_CFGDATA); })
+#define SDRAM0_WRITE(offset, data) ({\
+ mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+ mtdcr(DCRN_SDRAM0_CFGDATA, data); })
+
#define SDRAM0_B0CR 0x40
#define SDRAM0_B1CR 0x44
#define SDRAM0_B2CR 0x48
#define SDRAM0_B3CR 0x4c
-static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR };
+static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
+ SDRAM0_B2CR, SDRAM0_B3CR };
#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
Index: linux-merge/arch/powerpc/boot/ebony.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/ebony.c 2007-12-20 11:32:10.000000000 +1100
+++ linux-merge/arch/powerpc/boot/ebony.c 2007-12-21 14:20:19.000000000 +1100
@@ -134,7 +134,7 @@ static void ebony_fixups(void)
unsigned long sysclk = 33000000;
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
- ibm4xx_fixup_memsize();
+ ibm4xx_sdram_fixup_memsize();
dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ebony_flashsel_fixup();
Index: linux-merge/arch/powerpc/boot/treeboot-walnut.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/treeboot-walnut.c 2007-12-21 14:19:46.000000000 +1100
+++ linux-merge/arch/powerpc/boot/treeboot-walnut.c 2007-12-21 14:20:19.000000000 +1100
@@ -63,7 +63,7 @@ static void walnut_flashsel_fixup(void)
#define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b
static void walnut_fixups(void)
{
- ibm4xx_fixup_memsize();
+ ibm4xx_sdram_fixup_memsize();
ibm405gp_fixup_clocks(33330000, 0xa8c000);
ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
ibm4xx_fixup_ebc_ranges("/plb/ebc");
Index: linux-merge/arch/powerpc/boot/cuboot-taishan.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/cuboot-taishan.c 2007-12-21 14:20:04.000000000 +1100
+++ linux-merge/arch/powerpc/boot/cuboot-taishan.c 2007-12-21 14:20:19.000000000 +1100
@@ -38,7 +38,7 @@ static void taishan_fixups(void)
so we just use that code for now at least */
ibm440ep_fixup_clocks(sysclk, 6 * 1843200);
- ibm4xx_fixup_memsize();
+ ibm4xx_sdram_fixup_memsize();
dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
^ permalink raw reply
* [PATCH 12/21] [POWERPC] Wire up 440EP USB controlle support to Bamboo board
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds the definition of the on-chip OHCI controller to the
Bamboo board's device-tree. This is enough to get it probed and
working, though a separate patch fixing a bug in the OHCI driver
is needed to make it reliable.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/bamboo.dts | 7 +++++++
1 file changed, 7 insertions(+)
--- linux-merge.orig/arch/powerpc/boot/dts/bamboo.dts 2007-12-14 15:49:47.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/bamboo.dts 2007-12-14 15:49:48.000000000 +1100
@@ -238,6 +238,13 @@
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 1 9 1>;
+ interrupt-parent = < &UIC1 >;
+ };
};
PCI0: pci@ec000000 {
^ permalink raw reply
* [PATCH 11/21] [POWERPC] Wire up PCI on Bamboo board
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds the device-tree bits & call to ppc4xx_pci_find_bridges()
to make PCI work on the Bamboo board
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/bamboo.dts | 40 ++++++++++++++++++++++++++++++++++++-
arch/powerpc/platforms/44x/Kconfig | 1
2 files changed, 40 insertions(+), 1 deletion(-)
--- linux-merge.orig/arch/powerpc/boot/dts/bamboo.dts 2007-12-21 14:10:33.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/bamboo.dts 2007-12-21 14:13:20.000000000 +1100
@@ -239,10 +239,48 @@
zmii-channel = <1>;
};
};
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed00000 4 /* IACK */
+ 0 eed00000 4 /* Special cycle */
+ 0 ef400000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Bamboo has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
+ };
};
chosen {
linux,stdout-path = "/plb/opb/serial@ef600300";
- bootargs = "console=ttyS0,115200";
};
};
Index: linux-merge/arch/powerpc/platforms/44x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:13:33.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:13:38.000000000 +1100
@@ -3,6 +3,7 @@ config BAMBOO
depends on 44x
default n
select 440EP
+ select PCI
help
This option enables support for the IBM PPC440EP evaluation board.
^ permalink raw reply
* [PATCH 10/21] [POWERPC] Base support for 440GX Taishan eval board
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
From: Hugh Blemings <hugh@blemings.org>
This patch adds base support for the AMCC Taishan 440GX evaluation
board.
Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/Kconfig.debug | 6
arch/powerpc/boot/Makefile | 5
arch/powerpc/boot/cuboot-taishan.c | 56 ++
arch/powerpc/boot/dts/taishan.dts | 375 +++++++++++++++
arch/powerpc/configs/taishan_defconfig | 787 +++++++++++++++++++++++++++++++++
arch/powerpc/platforms/44x/Kconfig | 14
arch/powerpc/platforms/44x/Makefile | 1
arch/powerpc/platforms/44x/taishan.c | 74 +++
8 files changed, 1316 insertions(+), 2 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/Makefile 2007-12-21 14:20:00.000000000 +1100
+++ linux-merge/arch/powerpc/boot/Makefile 2007-12-21 14:20:04.000000000 +1100
@@ -37,8 +37,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+
zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
@@ -58,7 +60,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
- fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c
+ fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -199,6 +201,7 @@ image-$(CONFIG_EBONY) += treeImage.ebo
image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo
image-$(CONFIG_SEQUOIA) += cuImage.sequoia
image-$(CONFIG_WALNUT) += treeImage.walnut
+image-$(CONFIG_TAISHAN) += cuImage.taishan
endif
# For 32-bit powermacs, build the COFF and miboot images
Index: linux-merge/arch/powerpc/Kconfig.debug
===================================================================
--- linux-merge.orig/arch/powerpc/Kconfig.debug 2007-12-21 14:20:00.000000000 +1100
+++ linux-merge/arch/powerpc/Kconfig.debug 2007-12-21 14:20:04.000000000 +1100
@@ -225,7 +225,8 @@ config PPC_EARLY_DEBUG_44x
depends on 44x
help
Select this to enable early debugging for IBM 44x chips via the
- inbuilt serial port.
+ inbuilt serial port. If you enable this, ensure you set
+ PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
config PPC_EARLY_DEBUG_40x
bool "Early serial debugging for IBM/AMCC 40x CPUs"
@@ -250,6 +251,9 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
depends on PPC_EARLY_DEBUG_44x
default "0x40000200"
+ help
+ You probably want 0x40000200 for ebony boards and
+ 0x40000300 for taishan
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
Index: linux-merge/arch/powerpc/platforms/44x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:20:00.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:20:04.000000000 +1100
@@ -23,6 +23,16 @@ config SEQUOIA
help
This option enables support for the AMCC PPC440EPX evaluation board.
+config TAISHAN
+ bool "Taishan"
+ depends on 44x
+ default n
+ select 440GX
+ select PCI
+ help
+ This option enables support for the AMCC PPC440GX "Taishan"
+ evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
@@ -59,6 +69,10 @@ config 440GP
config 440GX
bool
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII #test only
+ select IBM_NEW_EMAC_TAH #test only
config 440SP
bool
Index: linux-merge/arch/powerpc/platforms/44x/Makefile
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/Makefile 2007-12-21 14:20:00.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Makefile 2007-12-21 14:20:04.000000000 +1100
@@ -1,4 +1,5 @@
obj-$(CONFIG_44x) := misc_44x.o
obj-$(CONFIG_EBONY) += ebony.o
+obj-$(CONFIG_TAISHAN) += taishan.o
obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
Index: linux-merge/arch/powerpc/platforms/44x/taishan.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/platforms/44x/taishan.c 2007-12-21 14:20:04.000000000 +1100
@@ -0,0 +1,74 @@
+/*
+ * Taishan board specific routines based off ebony.c code
+ * original copyrights below
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * Modified from ebony.c for taishan:
+ * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+#include "44x.h"
+
+static struct of_device_id taishan_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init taishan_device_probe(void)
+{
+ if (!machine_is(taishan))
+ return 0;
+
+ of_platform_bus_probe(NULL, taishan_of_bus, NULL);
+
+ return 0;
+}
+device_initcall(taishan_device_probe);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init taishan_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(taishan) {
+ .name = "Taishan",
+ .probe = taishan_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc44x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
Index: linux-merge/arch/powerpc/boot/dts/taishan.dts
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/dts/taishan.dts 2007-12-21 14:20:04.000000000 +1100
@@ -0,0 +1,375 @@
+/*
+ * Device Tree Source for IBM/AMCC Taishan
+ *
+ * Copyright 2007 IBM Corp.
+ * Hugh Blemings <hugh@au.ibm.com> based off code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,taishan";
+ compatible = "amcc,taishan";
+ dcr-parent = <&/cpus/PowerPC,440GX@0>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,440GX@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <2FAF0800>; // 800MHz
+ timebase-frequency = <0>; // Filled in by zImage
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <8000>; /* 32 kB */
+ d-cache-size = <8000>; /* 32 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; // Filled in by zImage
+ };
+
+
+ UICB0: interrupt-controller-base {
+ compatible = "ibm,uic-440gx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <200 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440gx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <01 4 00 4>; /* cascade - first non-critical */
+ interrupt-parent = <&UICB0>;
+
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440gx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <03 4 02 4>; /* cascade */
+ interrupt-parent = <&UICB0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-440gx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <2>; /* was 1 */
+ dcr-reg = <210 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <05 4 04 4>; /* cascade */
+ interrupt-parent = <&UICB0>;
+ };
+
+
+ CPC0: cpc {
+ compatible = "ibm,cpc-440gp";
+ dcr-reg = <0b0 003 0e0 010>;
+ // FIXME: anything else?
+ };
+
+ plb {
+ compatible = "ibm,plb-440gx", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <9896800>; // 160MHz
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-440gp";
+ dcr-reg = <010 2>;
+ // FIXME: anything else?
+ };
+
+ SRAM0: sram {
+ compatible = "ibm,sram-440gp";
+ dcr-reg = <020 8 00a 1>;
+ };
+
+ DMA0: dma {
+ // FIXME: ???
+ compatible = "ibm,dma-440gp";
+ dcr-reg = <100 027>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <4>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map-mask = <ffffffff>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440gx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <00000000 1 00000000 80000000
+ 80000000 1 80000000 80000000>;
+ dcr-reg = <090 00b>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <7 4>;
+ clock-frequency = <4C4B400>; // 80MHz
+
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440gx", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <4C4B400>; // 80MHz
+
+ /* ranges property is supplied by zImage
+ * based on firmware's configuration of the
+ * EBC bridge */
+
+ interrupts = <5 4>;
+ interrupt-parent = <&UIC1>;
+
+ /* TODO: Add other EBC devices */
+ };
+
+
+
+ UART0: serial@40000200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <40000200 8>;
+ virtual-reg = <e0000200>;
+ clock-frequency = <A8C000>;
+ current-speed = <1C200>; /* 115200 */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@40000300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <40000300 8>;
+ virtual-reg = <e0000300>;
+ clock-frequency = <A8C000>;
+ current-speed = <1C200>; /* 115200 */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ IIC0: i2c@40000400 {
+ /* FIXME */
+ device_type = "i2c";
+ compatible = "ibm,iic-440gp", "ibm,iic";
+ reg = <40000400 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+ IIC1: i2c@40000500 {
+ /* FIXME */
+ device_type = "i2c";
+ compatible = "ibm,iic-440gp", "ibm,iic";
+ reg = <40000500 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ GPIO0: gpio@40000700 {
+ /* FIXME */
+ compatible = "ibm,gpio-440gp";
+ reg = <40000700 20>;
+ };
+
+ ZMII0: emac-zmii@40000780 {
+ device_type = "zgmii-interface";
+ compatible = "ibm,zmii-440gx", "ibm,zmii";
+ reg = <40000780 c>;
+ };
+
+ RGMII0: emac-rgmii@40000790 {
+ device_type = "rgmii-interface";
+ compatible = "ibm,rgmii";
+ reg = <40000790 8>;
+ };
+
+
+ EMAC0: ethernet@40000800 {
+ unused = <1>;
+ linux,network-index = <2>;
+ device_type = "network";
+ compatible = "ibm,emac-440gx", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [000000000000]; // Filled in by zImage
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+ EMAC1: ethernet@40000900 {
+ unused = <1>;
+ linux,network-index = <3>;
+ device_type = "network";
+ compatible = "ibm,emac-440gx", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4 1f 4>;
+ reg = <40000900 70>;
+ local-mac-address = [000000000000]; // Filled in by zImage
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <1>;
+ };
+
+ EMAC2: ethernet@40000c00 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-440gx", "ibm,emac4";
+ interrupt-parent = <&UIC2>;
+ interrupts = <0 4 1 4>;
+ reg = <40000c00 70>;
+ local-mac-address = [000000000000]; // Filled in by zImage
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <2>;
+ cell-index = <2>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000001>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <2>;
+ };
+
+ EMAC3: ethernet@40000e00 {
+ linux,network-index = <1>;
+ device_type = "network";
+ compatible = "ibm,emac-440gx", "ibm,emac4";
+ interrupt-parent = <&UIC2>;
+ interrupts = <2 4 3 4>;
+ reg = <40000e00 70>;
+ local-mac-address = [000000000000]; // Filled in by zImage
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <3>;
+ cell-index = <3>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000003>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <3>;
+ };
+
+
+ GPT0: gpt@40000a00 {
+ /* FIXME */
+ reg = <40000a00 d4>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <12 4 13 4 14 4 15 4 16 4>;
+ };
+
+ };
+
+ PCIX0: pci@20ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <2 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ 2 0ed00000 4 /* Special cycles */
+ 2 0ec80000 100 /* Internal registers */
+ 2 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 00000003 80000000 0 80000000
+ 01000000 0 00000000 00000002 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 1 &UIC0 17 8
+ 0800 0 0 2 &UIC0 18 8
+ 0800 0 0 3 &UIC0 19 8
+ 0800 0 0 4 &UIC0 1a 8
+
+ /* IDSEL 2 */
+ 1000 0 0 1 &UIC0 18 8
+ 1000 0 0 2 &UIC0 19 8
+ 1000 0 0 3 &UIC0 1a 8
+ 1000 0 0 4 &UIC0 17 8
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@40000300";
+ };
+};
Index: linux-merge/arch/powerpc/boot/cuboot-taishan.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/cuboot-taishan.c 2007-12-21 14:20:04.000000000 +1100
@@ -0,0 +1,56 @@
+/*
+ * Old U-boot compatibility for Taishan
+ *
+ * Author: Hugh Blemings <hugh@au.ibm.com>
+ *
+ * Copyright 2007 Hugh Blemings, IBM Corporation.
+ * Based on cuboot-ebony.c which is:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(4096);
+
+static void taishan_fixups(void)
+{
+ /* FIXME: sysclk should be derived by reading the FPGA
+ registers */
+ unsigned long sysclk = 33000000;
+
+ /* 440EP Clock logic is all but identical to 440GX
+ so we just use that code for now at least */
+ ibm440ep_fixup_clocks(sysclk, 6 * 1843200);
+
+ ibm4xx_fixup_memsize();
+
+ dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+
+ ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+
+ platform_ops.fixups = taishan_fixups;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
Index: linux-merge/arch/powerpc/configs/taishan_defconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/configs/taishan_defconfig 2007-12-21 14:20:04.000000000 +1100
@@ -0,0 +1,787 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc4
+# Tue Dec 11 16:44:44 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_TAISHAN=y
+CONFIG_440GX=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="taishan.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
^ permalink raw reply
* [PATCH 9/21] [POWERPC] Add PCI to Walnut platform
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This wires up the 4xx PCI support & device-tree bits for the
405GP based Walnut platform.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This one is untested, haven't had time to dig my walnut and put it
back into working condition. Josh, can you verify that IRQs are
working (routing is correct ?) Thanks !
arch/powerpc/boot/dts/walnut.dts | 39 +++++++++++++++++++++++++++++++++++++
arch/powerpc/platforms/40x/Kconfig | 1
2 files changed, 40 insertions(+)
--- linux-merge.orig/arch/powerpc/boot/dts/walnut.dts 2007-12-21 14:10:33.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/walnut.dts 2007-12-21 14:12:36.000000000 +1100
@@ -190,6 +190,45 @@
virtual-reg = <f0300005>;
};
};
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+ primary;
+ reg = <eec00000 8 /* Config space access */
+ eed80000 4 /* IACK */
+ eed80000 4 /* Special cycle */
+ ef480000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 80000000>;
+
+ /* Walnut has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1d 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1e 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 1f 8
+ >;
+ };
};
chosen {
Index: linux-merge/arch/powerpc/platforms/40x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/Kconfig 2007-12-21 14:12:52.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/Kconfig 2007-12-21 14:12:55.000000000 +1100
@@ -59,6 +59,7 @@ config WALNUT
depends on 40x
default y
select 405GP
+ select PCI
help
This option enables support for the IBM PPC405GP evaluation board.
^ permalink raw reply
* [PATCH 8/21] [POWERPC] EP405 boards support for arch/powerpc
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD
comes from a device-tree property, PCI is working to the point where
I can see the video card, USB device, and south bridge.
This should work with both EP405 and EP405PC.
I've not totally figured out how IRQs are wired on this hardware
though, thus at this stage, expect only USB interrupts working,
pretty much the same as what arch/ppc did.
Also, the flash, nvram, rtc and temp control still have to be wired.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
Note about IRQ routing: The doc is very obscure in that area.
I _think_ the SB interrupt on the CPLD is actually the Windond's
8259 output and the NB interrupt is the PCI_A...PCI_D mux in
there (which can be implemented as a cascaded controller) but
I haven't sorted that out yet. If anybody from Embedded Planet
is around, I could use some advice there.
If my deductions are correct, then we would need to wire up the
8259 driver to SB, which should be trivial provided I stick the
windbond bridge in the device-tree, or at least part of it,
and probably implement a cascaded controller for the PCI IRQ
A...D mux thingy, which should also be trivial.
Note also that it tends to lockup during the transition from
the boot wrapper to the kernel, before udbg is started. I didn't
have a RiscWatch at hand so I haven't yet been able to track that
down. It's random though, quite weird. Maybe some stale TLB entries
or cache content that isn't cleared properly...
arch/powerpc/boot/4xx.c | 55 +-
arch/powerpc/boot/4xx.h | 1
arch/powerpc/boot/Makefile | 3
arch/powerpc/boot/dts/ep405.dts | 221 ++++++++
arch/powerpc/boot/ep405.c | 74 ++
arch/powerpc/boot/treeboot-walnut.c | 49 -
arch/powerpc/boot/wrapper | 2
arch/powerpc/configs/ep405_defconfig | 951 +++++++++++++++++++++++++++++++++++
arch/powerpc/platforms/40x/Kconfig | 22
arch/powerpc/platforms/40x/Makefile | 1
arch/powerpc/platforms/40x/ep405.c | 124 ++++
11 files changed, 1437 insertions(+), 66 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/Makefile 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/boot/Makefile 2007-12-21 14:19:46.000000000 +1100
@@ -58,7 +58,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
- fixed-head.S ep88xc.c cuboot-hpc2.c
+ fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -189,6 +189,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag
ifneq ($(CONFIG_DEVICE_TREE),"")
image-$(CONFIG_PPC_8xx) += cuImage.8xx
image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc
+image-$(CONFIG_EP405) += zImage.ep405
image-$(CONFIG_8260) += cuImage.pq2
image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx
image-$(CONFIG_PPC_83xx) += cuImage.83xx
Index: linux-merge/arch/powerpc/boot/ep405.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/ep405.c 2007-12-21 14:19:46.000000000 +1100
@@ -0,0 +1,74 @@
+/*
+ * Embedded Planet EP405 with PlanetCore firmware
+ *
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ *
+ * Based on ep88xc.c by
+ *
+ * Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "planetcore.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "io.h"
+
+static char *table;
+static u64 mem_size;
+
+static void platform_fixups(void)
+{
+ u64 val;
+ void *nvrtc;
+
+ dt_fixup_memory(0, mem_size);
+ planetcore_set_mac_addrs(table);
+
+ if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
+ printf("No PlanetCore crystal frequency key.\r\n");
+ return;
+ }
+ ibm405gp_fixup_clocks(val, 0xa8c000);
+ ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
+ ibm4xx_fixup_ebc_ranges("/plb/ebc");
+
+ if (!planetcore_get_decimal(table, PLANETCORE_KEY_KB_NVRAM, &val)) {
+ printf("No PlanetCore NVRAM size key.\r\n");
+ return;
+ }
+ nvrtc = finddevice("/plb/ebc/nvrtc@4,200000");
+ if (nvrtc != NULL) {
+ u32 reg[3] = { 4, 0x200000, 0};
+ getprop(nvrtc, "reg", reg, 3);
+ reg[2] = (val << 10) & 0xffffffff;
+ setprop(nvrtc, "reg", reg, 3);
+ }
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ table = (char *)r3;
+ planetcore_prepare_table(table);
+
+ if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
+ return;
+
+ mem_size *= 1024 * 1024;
+ simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
+
+ fdt_init(_dtb_start);
+
+ planetcore_set_stdout_path(table);
+
+ serial_console_init();
+ platform_ops.fixups = platform_fixups;
+}
Index: linux-merge/arch/powerpc/boot/dts/ep405.dts
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/boot/dts/ep405.dts 2007-12-21 14:19:46.000000000 +1100
@@ -0,0 +1,221 @@
+/*
+ * Device Tree Source for EP405
+ *
+ * Copyright 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "ep405";
+ compatible = "ep405";
+ dcr-parent = <&/cpus/PowerPC,405GP@0>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,405GP@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <bebc200>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <4000>;
+ d-cache-size = <4000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 9>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ plb {
+ compatible = "ibm,plb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL: mcmal {
+ compatible = "ibm,mcmal-405gp", "ibm,mcmal";
+ dcr-reg = <180 62>;
+ num-tx-chans = <1>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ b 4 /* TXEOB */
+ c 4 /* RXEOB */
+ a 4 /* SERR */
+ d 4 /* TXDE */
+ e 4 /* RXDE */>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <ef600000 ef600000 a00000>;
+ dcr-reg = <0a0 5>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <2580>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <2580>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ IIC: i2c@ef600500 {
+ compatible = "ibm,iic-405gp", "ibm,iic";
+ reg = <ef600500 11>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ GPIO: gpio@ef600700 {
+ compatible = "ibm,gpio-405gp";
+ reg = <ef600700 20>;
+ };
+
+ EMAC: ethernet@ef600800 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-405gp", "ibm,emac";
+ interrupt-parent = <&UIC0>;
+ interrupts = <
+ f 4 /* Ethernet */
+ 9 4 /* Ethernet Wake Up */>;
+ local-mac-address = [000000000000]; /* Filled in by zImage */
+ reg = <ef600800 70>;
+ mal-device = <&MAL>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ };
+
+ };
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+
+ /* The ranges property is supplied by the bootwrapper
+ * and is based on the firmware's configuration of the
+ * EBC bridge
+ */
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ /* NVRAM and RTC */
+ nvrtc@4,200000 {
+ compatible = "ds1742";
+ reg = <4 200000 0>; /* size fixed up by zImage */
+ };
+
+ /* "BCSR" CPLD contains a PCI irq controller */
+ bcsr@4,0 {
+ compatible = "ep405-bcsr";
+ reg = <4 0 10>;
+ interrupt-controller;
+ /* Routing table */
+ irq-routing = [ 00 /* SYSERR */
+ 01 /* STTM */
+ 01 /* RTC */
+ 01 /* FENET */
+ 02 /* NB PCIIRQ mux ? */
+ 03 /* SB Winbond 8259 ? */
+ 04 /* Serial Ring */
+ 05 /* USB (ep405pc) */
+ 06 /* XIRQ 0 */
+ 06 /* XIRQ 1 */
+ 06 /* XIRQ 2 */
+ 06 /* XIRQ 3 */
+ 06 /* XIRQ 4 */
+ 06 /* XIRQ 5 */
+ 06 /* XIRQ 6 */
+ 07]; /* Reserved */
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
+ primary;
+ reg = <eec00000 8 /* Config space access */
+ eed80000 4 /* IACK */
+ eed80000 4 /* Special cycle */
+ ef480000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 80000000>;
+
+ /* That's all I know about IRQs on that thing ... */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* USB */
+ 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
Index: linux-merge/arch/powerpc/boot/4xx.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/4xx.c 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.c 2007-12-21 14:19:46.000000000 +1100
@@ -179,13 +179,16 @@ void ibm40x_dbcr_reset(void)
#define EMAC_RESET 0x20000000
void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
{
- /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */
+ /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't
+ * do this for us
+ */
if (emac0)
*emac0 = EMAC_RESET;
if (emac1)
*emac1 = EMAC_RESET;
mtdcr(DCRN_MAL0_CFG, MAL_RESET);
+ while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET) {};
}
/* Read 4xx EBC bus bridge registers to get mappings of the peripheral
@@ -298,3 +301,53 @@ void ibm440ep_fixup_clocks(unsigned int
dt_fixup_clock("/plb/opb/serial@ef600500", uart0);
dt_fixup_clock("/plb/opb/serial@ef600600", uart0);
}
+
+void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+{
+ u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
+ u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
+ u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
+ u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
+ u32 fwdv, fbdv, cbdv, opdv, epdv, udiv;
+
+ fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
+ fbdv = (pllmr & 0x1e000000) >> 25;
+ cbdv = ((pllmr & 0x00060000) >> 17) + 1;
+ opdv = ((pllmr & 0x00018000) >> 15) + 1;
+ epdv = ((pllmr & 0x00001800) >> 13) + 2;
+ udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
+
+ m = fwdv * fbdv * cbdv;
+
+ cpu = sysclk * m / fwdv;
+ plb = cpu / cbdv;
+ opb = plb / opdv;
+ ebc = plb / epdv;
+
+ if (cpc0_cr0 & 0x80) {
+ /* uart0 uses the external clock */
+ uart0 = ser_clk;
+ } else {
+ uart0 = cpu / udiv;
+ }
+
+ if (cpc0_cr0 & 0x40) {
+ /* uart1 uses the external clock */
+ uart1 = ser_clk;
+ } else {
+ uart1 = cpu / udiv;
+ }
+
+ /* setup the timebase clock to tick at the cpu frequency */
+ cpc0_cr1 = cpc0_cr1 & ~0x00800000;
+ mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
+ tb = cpu;
+
+ dt_fixup_cpu_clocks(cpu, tb, 0);
+ dt_fixup_clock("/plb", plb);
+ dt_fixup_clock("/plb/opb", opb);
+ dt_fixup_clock("/plb/ebc", ebc);
+ dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
+ dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
+}
+
Index: linux-merge/arch/powerpc/boot/treeboot-walnut.c
===================================================================
--- linux-merge.orig/arch/powerpc/boot/treeboot-walnut.c 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/boot/treeboot-walnut.c 2007-12-21 14:19:46.000000000 +1100
@@ -20,55 +20,6 @@
BSS_STACK(4096);
-void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
-{
- u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
- u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
- u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
- u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
- u32 fwdv, fbdv, cbdv, opdv, epdv, udiv;
-
- fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
- fbdv = (pllmr & 0x1e000000) >> 25;
- cbdv = ((pllmr & 0x00060000) >> 17) + 1;
- opdv = ((pllmr & 0x00018000) >> 15) + 1;
- epdv = ((pllmr & 0x00001800) >> 13) + 2;
- udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
-
- m = fwdv * fbdv * cbdv;
-
- cpu = sysclk * m / fwdv;
- plb = cpu / cbdv;
- opb = plb / opdv;
- ebc = plb / epdv;
-
- if (cpc0_cr0 & 0x80) {
- /* uart0 uses the external clock */
- uart0 = ser_clk;
- } else {
- uart0 = cpu / udiv;
- }
-
- if (cpc0_cr0 & 0x40) {
- /* uart1 uses the external clock */
- uart1 = ser_clk;
- } else {
- uart1 = cpu / udiv;
- }
-
- /* setup the timebase clock to tick at the cpu frequency */
- cpc0_cr1 = cpc0_cr1 & ~0x00800000;
- mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
- tb = cpu;
-
- dt_fixup_cpu_clocks(cpu, tb, 0);
- dt_fixup_clock("/plb", plb);
- dt_fixup_clock("/plb/opb", opb);
- dt_fixup_clock("/plb/ebc", ebc);
- dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
- dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
-}
-
static void walnut_flashsel_fixup(void)
{
void *devp, *sram;
Index: linux-merge/arch/powerpc/platforms/40x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/Kconfig 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/Kconfig 2007-12-21 14:19:51.000000000 +1100
@@ -14,20 +14,14 @@
# help
# This option enables support for the CPCI405 board.
-#config EP405
-# bool "EP405/EP405PC"
-# depends on 40x
-# default n
-# select 405GP
-# help
-# This option enables support for the EP405/EP405PC boards.
-
-#config EP405PC
-# bool "EP405PC Support"
-# depends on EP405
-# default y
-# help
-# This option enables support for the extra features of the EP405PC board.
+config EP405
+ bool "EP405/EP405PC"
+ depends on 40x
+ default n
+ select 405GP
+ select PCI
+ help
+ This option enables support for the EP405/EP405PC boards.
config KILAUEA
bool "Kilauea"
Index: linux-merge/arch/powerpc/platforms/40x/Makefile
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/40x/Makefile 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/40x/Makefile 2007-12-21 14:19:46.000000000 +1100
@@ -1,3 +1,4 @@
obj-$(CONFIG_KILAUEA) += kilauea.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
+obj-$(CONFIG_EP405) += ep405.o
Index: linux-merge/arch/powerpc/platforms/40x/ep405.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/platforms/40x/ep405.c 2007-12-21 14:19:46.000000000 +1100
@@ -0,0 +1,124 @@
+/*
+ * Architecture- / platform-specific boot-time initialization code for
+ * IBM PowerPC 4xx based boards. Adapted from original
+ * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
+ * <dan@net4x.com>.
+ *
+ * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 IBM Corporation
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Adapted to EP405 by Ben. Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * TODO: Wire up the PCI IRQ mux and the southbridge interrupts
+ *
+ * 2002 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+
+static struct device_node *bcsr_node;
+static void __iomem *bcsr_regs;
+
+/* BCSR registers */
+#define BCSR_ID 0
+#define BCSR_PCI_CTRL 1
+#define BCSR_FLASH_NV_POR_CTRL 2
+#define BCSR_FENET_UART_CTRL 3
+#define BCSR_PCI_IRQ 4
+#define BCSR_XIRQ_SELECT 5
+#define BCSR_XIRQ_ROUTING 6
+#define BCSR_XIRQ_STATUS 7
+#define BCSR_XIRQ_STATUS2 8
+#define BCSR_SW_STAT_LED_CTRL 9
+#define BCSR_GPIO_IRQ_PAR_CTRL 10
+/* there's more, can't be bothered typing them tho */
+
+
+static struct of_device_id ep405_of_bus[] = {
+ { .compatible = "ibm,plb3", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init ep405_device_probe(void)
+{
+ if (!machine_is(ep405))
+ return 0;
+
+ of_platform_bus_probe(NULL, ep405_of_bus, NULL);
+
+ return 0;
+}
+device_initcall(ep405_device_probe);
+
+static void __init ep405_init_bcsr(void)
+{
+ const u8 *irq_routing;
+ int i;
+
+ /* Find the bloody thing & map it */
+ bcsr_node = of_find_compatible_node(NULL, NULL, "ep405-bcsr");
+ if (bcsr_node == NULL) {
+ printk(KERN_ERR "EP405 BCSR not found !\n");
+ return;
+ }
+ bcsr_regs = of_iomap(bcsr_node, 0);
+ if (bcsr_regs == NULL) {
+ printk(KERN_ERR "EP405 BCSR failed to map !\n");
+ return;
+ }
+
+ /* Get the irq-routing property and apply the routing to the CPLD */
+ irq_routing = of_get_property(bcsr_node, "irq-routing", NULL);
+ if (irq_routing == NULL)
+ return;
+ for (i = 0; i < 16; i++) {
+ u8 irq = irq_routing[i];
+ out_8(bcsr_regs + BCSR_XIRQ_SELECT, i);
+ out_8(bcsr_regs + BCSR_XIRQ_ROUTING, irq);
+ }
+ in_8(bcsr_regs + BCSR_XIRQ_SELECT);
+ mb();
+ out_8(bcsr_regs + BCSR_GPIO_IRQ_PAR_CTRL, 0xfe);
+}
+
+static void __init ep405_setup_arch(void)
+{
+ /* Find & init the BCSR CPLD */
+ ep405_init_bcsr();
+}
+
+static int __init ep405_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ep405"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(ep405) {
+ .name = "EP405",
+ .probe = ep405_probe,
+ .setup_arch = ep405_setup_arch,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+};
Index: linux-merge/arch/powerpc/boot/4xx.h
===================================================================
--- linux-merge.orig/arch/powerpc/boot/4xx.h 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/boot/4xx.h 2007-12-21 14:19:46.000000000 +1100
@@ -18,5 +18,6 @@ void ibm40x_dbcr_reset(void);
void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1);
void ibm4xx_fixup_ebc_ranges(const char *ebc);
void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk);
+void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk);
#endif /* _POWERPC_BOOT_4XX_H_ */
Index: linux-merge/arch/powerpc/boot/wrapper
===================================================================
--- linux-merge.orig/arch/powerpc/boot/wrapper 2007-12-21 14:19:24.000000000 +1100
+++ linux-merge/arch/powerpc/boot/wrapper 2007-12-21 14:19:46.000000000 +1100
@@ -168,7 +168,7 @@ ps3)
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
-ep88xc)
+ep88xc|ep405)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;
Index: linux-merge/arch/powerpc/configs/ep405_defconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/configs/ep405_defconfig 2007-12-21 14:19:46.000000000 +1100
@@ -0,0 +1,951 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc2
+# Wed Nov 21 16:44:30 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EP405=y
+# CONFIG_KILAUEA is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+CONFIG_405GP=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="ep405.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
^ permalink raw reply
* [PATCH 7/21] [POWERPC] Add early udbg support for 40x processors
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds some basic real mode based early udbg support for 40x
in order to debug things more easily
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/Kconfig.debug | 13 +++++++++++
arch/powerpc/kernel/misc_32.S | 39 +++++++++++++++++++++++++++++++++
arch/powerpc/kernel/udbg.c | 3 ++
arch/powerpc/kernel/udbg_16550.c | 33 +++++++++++++++++++++++++++
arch/powerpc/platforms/Kconfig.cputype | 1
include/asm-powerpc/udbg.h | 1
6 files changed, 90 insertions(+)
--- linux-merge.orig/arch/powerpc/Kconfig.debug 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/Kconfig.debug 2007-12-14 15:49:44.000000000 +1100
@@ -227,6 +227,14 @@ config PPC_EARLY_DEBUG_44x
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port.
+config PPC_EARLY_DEBUG_40x
+ bool "Early serial debugging for IBM/AMCC 40x CPUs"
+ depends on 40x
+ help
+ Select this to enable early debugging for IBM 40x chips via the
+ inbuilt serial port. This works on chips with a 16550 compatible
+ UART. Xilinx chips with uartlite cannot use this option.
+
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM
@@ -248,6 +256,11 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH
depends on PPC_EARLY_DEBUG_44x
default "0x1"
+config PPC_EARLY_DEBUG_40x_PHYSADDR
+ hex "Early debug UART physical address"
+ depends on PPC_EARLY_DEBUG_40x
+ default "0xef600300"
+
config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
Index: linux-merge/arch/powerpc/kernel/misc_32.S
===================================================================
--- linux-merge.orig/arch/powerpc/kernel/misc_32.S 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/kernel/misc_32.S 2007-12-14 15:49:44.000000000 +1100
@@ -206,6 +206,45 @@ _GLOBAL(_nmask_and_or_msr)
isync
blr /* Done */
+#ifdef CONFIG_40x
+
+/*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_readb)
+ mfmsr r7
+ ori r0,r7,MSR_DR
+ xori r0,r0,MSR_DR
+ sync
+ mtmsr r0
+ sync
+ isync
+ lbz r3,0(r3)
+ sync
+ mtmsr r7
+ sync
+ isync
+ blr
+
+ /*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_writeb)
+ mfmsr r7
+ ori r0,r7,MSR_DR
+ xori r0,r0,MSR_DR
+ sync
+ mtmsr r0
+ sync
+ isync
+ stb r3,0(r4)
+ sync
+ mtmsr r7
+ sync
+ isync
+ blr
+
+#endif /* CONFIG_40x */
/*
* Flush MMU TLB
Index: linux-merge/arch/powerpc/kernel/udbg.c
===================================================================
--- linux-merge.orig/arch/powerpc/kernel/udbg.c 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/kernel/udbg.c 2007-12-14 15:49:44.000000000 +1100
@@ -54,6 +54,9 @@ void __init udbg_early_init(void)
#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
/* PPC44x debug */
udbg_init_44x_as1();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_40x)
+ /* PPC40x debug */
+ udbg_init_40x_realmode();
#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
udbg_init_cpm();
#endif
Index: linux-merge/arch/powerpc/kernel/udbg_16550.c
===================================================================
--- linux-merge.orig/arch/powerpc/kernel/udbg_16550.c 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/kernel/udbg_16550.c 2007-12-14 15:49:44.000000000 +1100
@@ -225,3 +225,36 @@ void __init udbg_init_44x_as1(void)
udbg_getc = udbg_44x_as1_getc;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_40x
+static void udbg_40x_real_putc(char c)
+{
+ if (udbg_comport) {
+ while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+ /* wait for idle */;
+ real_writeb(c, &udbg_comport->thr); eieio();
+ if (c == '\n')
+ udbg_40x_real_putc('\r');
+ }
+}
+
+static int udbg_40x_real_getc(void)
+{
+ if (udbg_comport) {
+ while ((real_readb(&udbg_comport->lsr) & LSR_DR) == 0)
+ ; /* wait for char */
+ return real_readb(&udbg_comport->rbr);
+ }
+ return -1;
+}
+
+void __init udbg_init_40x_realmode(void)
+{
+ udbg_comport = (struct NS16550 __iomem *)
+ CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
+
+ udbg_putc = udbg_40x_real_putc;
+ udbg_getc = udbg_40x_real_getc;
+ udbg_getc_poll = NULL;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
Index: linux-merge/include/asm-powerpc/udbg.h
===================================================================
--- linux-merge.orig/include/asm-powerpc/udbg.h 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/include/asm-powerpc/udbg.h 2007-12-14 15:49:44.000000000 +1100
@@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_consol
extern void __init udbg_init_debug_beat(void);
extern void __init udbg_init_btext(void);
extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
#endif /* __KERNEL__ */
Index: linux-merge/arch/powerpc/platforms/Kconfig.cputype
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/Kconfig.cputype 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/Kconfig.cputype 2007-12-14 15:49:44.000000000 +1100
@@ -43,6 +43,7 @@ config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
select WANT_DEVICE_TREE
+ select PPC_UDBG_16550
config 44x
bool "AMCC 44x"
^ permalink raw reply
* [PATCH 6/21] [POWERPC] PCI support for 4xx Ebony board
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This wires up the 4xx PCI support & device tree bits for
440GP based Ebony platform.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/ebony.dts | 41 ++++++++++++++++++++++++++++++++-----
arch/powerpc/platforms/44x/Kconfig | 1
2 files changed, 37 insertions(+), 5 deletions(-)
--- linux-merge.orig/arch/powerpc/boot/dts/ebony.dts 2007-12-21 14:10:34.000000000 +1100
+++ linux-merge/arch/powerpc/boot/dts/ebony.dts 2007-12-21 14:11:51.000000000 +1100
@@ -284,12 +284,43 @@
};
- PCIX0: pci@1234 {
+ PCIX0: pci@20ec00000 {
device_type = "pci";
- /* FIXME */
- reg = <2 0ec00000 8
- 2 0ec80000 f0
- 2 0ec80100 fc>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+ primary;
+ reg = <2 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ 2 0ed00000 4 /* Special cycles */
+ 2 0ec80000 f0 /* Internal registers */
+ 2 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 00000003 80000000 0 80000000
+ 01000000 0 00000000 00000002 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Ebony has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 17 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 18 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 19 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 1a 8
+ >;
};
};
Index: linux-merge/arch/powerpc/platforms/44x/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:12:05.000000000 +1100
+++ linux-merge/arch/powerpc/platforms/44x/Kconfig 2007-12-21 14:12:09.000000000 +1100
@@ -11,6 +11,7 @@ config EBONY
depends on 44x
default y
select 440GP
+ select PCI
help
This option enables support for the IBM PPC440GP evaluation board.
^ permalink raw reply
* [PATCH 5/21] [POWERPC] 4xx PLB to PCI Express support
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds to the previous 2 patches the support for the 4xx PCI Express
cells as found in the 440SPe revA, revB and 405EX.
Unfortunately, due to significant differences between these, and other
interesting "features" of those pieces of HW, the code isn't as simple
as it is for PCI and PCI-X and some of the functions differ significantly
between the 3 implementations. Thus, not only this code can only support
those 3 implementations for now and will refuse to operate on any other,
but there are added ifdef's to avoid the bloat of building a fairly large
amount of code on platforms that don't need it.
Also, this code currently only supports fully initializing root complex
nodes, not endpoint. Some more code will have to be lifted from the
arch/ppc implementation to add the endpoint support, though it's mostly
differences in memory mapping, and the question on how to represent
endpoint mode PCI in the device-tree is thus open.
Many thanks to Stefan Roese for testing & fixing up the 405EX bits !
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stefan Roese <sr@denx.de>
---
arch/powerpc/Kconfig | 1
arch/powerpc/sysdev/Kconfig | 8
arch/powerpc/sysdev/ppc4xx_pci.c | 994 ++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/ppc4xx_pci.h | 242 +++++++++
4 files changed, 1227 insertions(+), 18 deletions(-)
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:43.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:43.000000000 +1100
@@ -3,16 +3,31 @@
*
* Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
*
+ * Most PCI Express code is coming from Stefan Roese implementation for
+ * arch/ppc in the Denx tree, slightly reworked by me.
+ *
+ * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Some of that comes itself from a previous implementation for 440SPE only
+ * by Roland Dreier:
+ *
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/of.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
#include "ppc4xx_pci.h"
@@ -21,6 +36,17 @@ static int dma_offset_set;
/* Move that to a useable header */
extern unsigned long total_memory;
+#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
+#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
+
+#ifdef CONFIG_RESOURCES_64BIT
+#define RES_TO_U32_LOW(val) U64_TO_U32_LOW(val)
+#define RES_TO_U32_HIGH(val) U64_TO_U32_HIGH(val)
+#else
+#define RES_TO_U32_LOW(val) (val)
+#define RES_TO_U32_HIGH(val) (0)
+#endif
+
static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
{
struct pci_controller *hose;
@@ -178,13 +204,8 @@ static void __init ppc4xx_configure_pci_
/* Calculate register values */
la = res->start;
-#ifdef CONFIG_RESOURCES_64BIT
- pciha = (res->start - hose->pci_mem_offset) >> 32;
- pcila = (res->start - hose->pci_mem_offset) & 0xffffffffu;
-#else
- pciha = 0;
- pcila = res->start - hose->pci_mem_offset;
-#endif
+ pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
ma = res->end + 1 - res->start;
if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
@@ -333,16 +354,10 @@ static void __init ppc4xx_configure_pcix
}
/* Calculate register values */
-#ifdef CONFIG_RESOURCES_64BIT
- lah = res->start >> 32;
- lal = res->start & 0xffffffffu;
- pciah = (res->start - hose->pci_mem_offset) >> 32;
- pcial = (res->start - hose->pci_mem_offset) & 0xffffffffu;
-#else
- lah = pciah = 0;
- lal = res->start;
- pcial = res->start - hose->pci_mem_offset;
-#endif
+ lah = RES_TO_U32_HIGH(res->start);
+ lal = RES_TO_U32_LOW(res->start);
+ pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
sa = res->end + 1 - res->start;
if (!is_power_of_2(sa) || sa < 0x100000 ||
sa > 0xffffffffu) {
@@ -492,20 +507,963 @@ static void __init ppc4xx_probe_pcix_bri
iounmap(reg);
}
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
+
/*
* 4xx PCI-Express part
+ *
+ * We support 3 parts currently based on the compatible property:
+ *
+ * ibm,plb-pciex-440speA
+ * ibm,plb-pciex-440speB
+ * ibm,plb-pciex-405ex
+ *
+ * Anything else will be rejected for now as they are all subtly
+ * different unfortunately.
+ *
*/
+
+#define MAX_PCIE_BUS_MAPPED 0x10
+
+struct ppc4xx_pciex_port
+{
+ struct pci_controller *hose;
+ struct device_node *node;
+ unsigned int index;
+ int endpoint;
+ unsigned int sdr_base;
+ dcr_host_t dcrs;
+ struct resource cfg_space;
+ struct resource utl_regs;
+};
+
+static struct ppc4xx_pciex_port *ppc4xx_pciex_ports;
+static unsigned int ppc4xx_pciex_port_count;
+
+struct ppc4xx_pciex_hwops
+{
+ int (*core_init)(struct device_node *np);
+ int (*port_init_hw)(struct ppc4xx_pciex_port *port);
+ int (*setup_utl)(struct ppc4xx_pciex_port *port);
+};
+
+static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops;
+
+#ifdef CONFIG_44x
+
+/* Check various reset bits of the 440SPe PCIe core */
+static int __init ppc440spe_pciex_check_reset(struct device_node *np)
+{
+ u32 valPE0, valPE1, valPE2;
+ int err = 0;
+
+ /* SDR0_PEGPLLLCT1 reset */
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) {
+ /*
+ * the PCIe core was probably already initialised
+ * by firmware - let's re-reset RCSSET regs
+ *
+ * -- Shouldn't we also re-reset the whole thing ? -- BenH
+ */
+ pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n");
+ mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000);
+ mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000);
+ }
+
+ valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET);
+ valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET);
+ valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET);
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & 0x01000000) ||
+ !(valPE1 & 0x01000000) ||
+ !(valPE2 & 0x01000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & 0x00010000) ||
+ !(valPE1 & 0x00010000) ||
+ !(valPE2 & 0x00010000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & 0x00001000) ||
+ (valPE1 & 0x00001000) ||
+ (valPE2 & 0x00001000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & 0x10000000) ||
+ (valPE1 & 0x10000000) ||
+ (valPE2 & 0x10000000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & 0x00100000) ||
+ (valPE1 & 0x00100000) ||
+ (valPE2 & 0x00100000)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET shutdown */
+ if ((valPE0 & 0x00000100) ||
+ (valPE1 & 0x00000100) ||
+ (valPE2 & 0x00000100)) {
+ printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/* Global PCIe core initializations for 440SPe core */
+static int __init ppc440spe_pciex_core_init(struct device_node *np)
+{
+ int time_out = 20;
+
+ /* Set PLL clock receiver to LVPECL */
+ mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+
+ /* Shouldn't we do all the calibration stuff etc... here ? */
+ if (ppc440spe_pciex_check_reset(np))
+ return -ENXIO;
+
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) {
+ printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
+ "failed (0x%08x)\n",
+ mfdcri(SDR0, PESDR0_PLLLCT2));
+ return -1;
+ }
+
+ /* De-assert reset of PCIe PLL, wait for lock */
+ mtdcri(SDR0, PESDR0_PLLLCT1,
+ mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+ udelay(3);
+
+ while (time_out) {
+ if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) {
+ time_out--;
+ udelay(1);
+ } else
+ break;
+ }
+ if (!time_out) {
+ printk(KERN_INFO "PCIE: VCO output not locked\n");
+ return -1;
+ }
+
+ pr_debug("PCIE initialization OK\n");
+
+ return 3;
+}
+
+static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val = 1 << 24;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0)
+ val |= LNKW_X8 << 12;
+ else
+ val |= LNKW_X4 << 12;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-440speA"))
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000);
+ if (port->index == 0) {
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1,
+ 0x35000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+ 0x35000000);
+ }
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+ return 0;
+}
+
+static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *utl_base;
+
+ /* XXX Check what that value means... I hate magic */
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800);
+
+ utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(utl_base == NULL);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+
+ iounmap(utl_base);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
+{
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440spe_pciex_init_port_hw,
+ .setup_utl = ppc440speA_pciex_init_utl,
+};
+
+static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
+{
+ .core_init = ppc440spe_pciex_core_init,
+ .port_init_hw = ppc440spe_pciex_init_port_hw,
+};
+
+
+#endif /* CONFIG_44x */
+
+#ifdef CONFIG_40x
+
+static int __init ppc405ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port)
+{
+ /* Assert the PE0_PHY reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000);
+ msleep(1);
+
+ /* deassert the PE0_hotreset */
+ if (port->endpoint)
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000);
+ else
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000);
+
+ /* poll for phy !reset */
+ /* XXX FIXME add timeout */
+ while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000))
+ ;
+
+ /* deassert the PE0_gpl_utl_reset */
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000);
+}
+
+static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT;
+ else
+ val = PTYPE_ROOT_PORT;
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET,
+ 1 << 24 | val << 20 | LNKW_X1 << 12);
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000);
+ mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003);
+
+ /*
+ * Only reset the PHY when no link is currently established.
+ * This is for the Atheros PCIe board which has problems to establish
+ * the link (again) after this PHY reset. All other currently tested
+ * PCIe boards don't show this problem.
+ * This has to be re-tested and fixed in a later release!
+ */
+#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
+ * configured as done previously by U-Boot. Then Linux will currently
+ * not reassign them. So the PHY reset is now done always. This will
+ * lead to problems with the Atheros PCIe board again.
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000))
+ ppc405ex_pcie_phy_reset(port);
+#else
+ ppc405ex_pcie_phy_reset(port);
+#endif
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
+
+ return 0;
+}
+
+static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *utl_base;
+
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ utl_base = ioremap(port->utl_regs.start, 0x100);
+ BUG_ON(utl_base == NULL);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x02000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x21000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(utl_base + PEUTL_RCSTA,
+ in_be32(utl_base + PEUTL_RCSTA) | 0x000040000);
+
+ iounmap(utl_base);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
+{
+ .core_init = ppc405ex_pciex_core_init,
+ .port_init_hw = ppc405ex_pciex_init_port_hw,
+ .setup_utl = ppc405ex_pciex_init_utl,
+};
+
+#endif /* CONFIG_40x */
+
+
+/* Check that the core has been initied and if not, do it */
+static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
+{
+ static int core_init;
+ int count = -ENODEV;
+
+ if (core_init++)
+ return 0;
+
+#ifdef CONFIG_44x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-440speA"))
+ ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+ else if (of_device_is_compatible(np, "ibm,plb-pciex-440speB"))
+ ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+#endif /* CONFIG_44x */
+#ifdef CONFIG_40x
+ if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+ ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
+#endif
+ if (ppc4xx_pciex_hwops == NULL) {
+ printk(KERN_WARNING "PCIE: unknown host type %s\n",
+ np->full_name);
+ return -ENODEV;
+ }
+
+ count = ppc4xx_pciex_hwops->core_init(np);
+ if (count > 0) {
+ ppc4xx_pciex_ports =
+ kzalloc(count * sizeof(struct ppc4xx_pciex_port),
+ GFP_KERNEL);
+ if (ppc4xx_pciex_ports) {
+ ppc4xx_pciex_port_count = count;
+ return 0;
+ }
+ printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
+ return -ENOMEM;
+ }
+ return -ENODEV;
+}
+
+static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port)
+{
+ /* We map PCI Express configuration based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH,
+ RES_TO_U32_HIGH(port->cfg_space.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL,
+ RES_TO_U32_LOW(port->cfg_space.start));
+
+ /* XXX FIXME: Use size from reg property. For now, map 512M */
+ dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001);
+
+ /* We map UTL registers based on the reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAH,
+ RES_TO_U32_HIGH(port->utl_regs.start));
+ dcr_write(port->dcrs, DCRO_PEGPL_REGBAL,
+ RES_TO_U32_LOW(port->utl_regs.start));
+
+ /* XXX FIXME: Use size from reg property */
+ dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001);
+
+ /* Disable all other outbound windows */
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0);
+}
+
+static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
+{
+ int attempts, rc = 0;
+ u32 val;
+
+ /* Check if it's endpoint or root complex
+ *
+ * XXX Do we want to use the device-tree instead ? --BenH.
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_DLPSET);
+ port->endpoint = (((val >> 20) & 0xf) != PTYPE_ROOT_PORT);
+
+ /* Init HW */
+ if (ppc4xx_pciex_hwops->port_init_hw)
+ rc = ppc4xx_pciex_hwops->port_init_hw(port);
+ if (rc != 0)
+ return rc;
+
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ *
+ * XXX FIXME: There are various issues with that link up thingy,
+ * we could just wait for the link with a timeout but Stefan says
+ * some cards need more time even after the link is up. I'll
+ * investigate. For now, we keep a fixed 1s delay.
+ *
+ * Ultimately, it should be made asynchronous so all ports are
+ * brought up simultaneously though.
+ */
+ printk(KERN_INFO "PCIE%d: Waiting for link to go up...\n",
+ port->index);
+ msleep(1000);
+
+ /*
+ * Check that we exited the reset state properly
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS);
+ if (val & (1 << 20)) {
+ printk(KERN_WARNING "PCIE%d: PGRST failed %08x\n",
+ port->index, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000)) {
+ printk(KERN_INFO "PCIE%d: link is not up !\n",
+ port->index);
+ return -1;
+ }
+
+ printk(KERN_INFO "PCIE%d: link is up !\n",
+ port->index);
+
+ /*
+ * Initialize mapping: disable all regions and configure
+ * CFG and REG regions based on resources in the device tree
+ */
+ ppc4xx_pciex_port_init_mapping(port);
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ *
+ * To be reworked. We may also be able to move that to
+ * before the link wait
+ * --BenH.
+ */
+ if (ppc4xx_pciex_hwops->setup_utl)
+ ppc4xx_pciex_hwops->setup_utl(port);
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ while (!(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n",
+ port->index);
+ return -1;
+ }
+ msleep(1000);
+ }
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+ msleep(100);
+
+ return 0;
+}
+
+static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ static int message;
+
+ /* Endpoint can not generate upstream(remote) config cycles */
+ if (port->endpoint && bus->number != port->hose->first_busno)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Check we are within the mapped range */
+ if (bus->number > port->hose->last_busno) {
+ if (!message) {
+ printk(KERN_WARNING "Warning! Probing bus %u"
+ " out of range !\n", bus->number);
+ message++;
+ }
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* The root complex has only one device / function */
+ if (bus->number == port->hose->first_busno && devfn != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* The other side of the RC has only one device as well */
+ if (bus->number == (port->hose->first_busno + 1) &&
+ PCI_SLOT(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return 0;
+}
+
+static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port,
+ struct pci_bus *bus,
+ unsigned int devfn)
+{
+ int relbus;
+
+ /* Remove the casts when we finally remove the stupid volatile
+ * in struct pci_controller
+ */
+ if (bus->number == port->hose->first_busno)
+ return (void __iomem *)port->hose->cfg_addr;
+
+ relbus = bus->number - (port->hose->first_busno + 1);
+ return (void __iomem *)port->hose->cfg_data +
+ ((relbus << 20) | (devfn << 12));
+}
+
+static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ BUG_ON(hose != port->hose);
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)(addr + offset));
+ break;
+ case 2:
+ *val = in_le16((u16 *)(addr + offset));
+ break;
+ default:
+ *val = in_le32((u32 *)(addr + offset));
+ break;
+ }
+
+ pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, *val);
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct ppc4xx_pciex_port *port =
+ &ppc4xx_pciex_ports[hose->indirect_type];
+ void __iomem *addr;
+ u32 gpl_cfg;
+
+ if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = ppc4xx_pciex_get_config_base(port, bus, devfn);
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG);
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA);
+
+ pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x"
+ " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n",
+ bus->number, hose->first_busno, hose->last_busno,
+ devfn, offset, len, addr + offset, val);
+
+ switch (len) {
+ case 1:
+ out_8((u8 *)(addr + offset), val);
+ break;
+ case 2:
+ out_le16((u16 *)(addr + offset), val);
+ break;
+ default:
+ out_le32((u32 *)(addr + offset), val);
+ break;
+ }
+
+ dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ppc4xx_pciex_pci_ops =
+{
+ .read = ppc4xx_pciex_read_config,
+ .write = ppc4xx_pciex_write_config,
+};
+
+static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase)
+{
+ u32 lah, lal, pciah, pcial, sa;
+ int i, j;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 1) {
+ printk(KERN_WARNING "%s: Too many ranges\n",
+ port->node->full_name);
+ break;
+ }
+
+ /* Calculate register values */
+ lah = RES_TO_U32_HIGH(res->start);
+ lal = RES_TO_U32_LOW(res->start);
+ pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset);
+ pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset);
+ sa = res->end + 1 - res->start;
+ if (!is_power_of_2(sa) || sa < 0x100000 ||
+ sa > 0xffffffffu) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ port->node->full_name);
+ continue;
+ }
+ sa = (0xffffffffu << ilog2(sa)) | 0x1;
+
+ /* Program register values */
+ switch (j) {
+ case 0:
+ out_le32(mbase + PECFG_POM0LAH, pciah);
+ out_le32(mbase + PECFG_POM0LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+ break;
+ case 1:
+ out_le32(mbase + PECFG_POM1LAH, pciah);
+ out_le32(mbase + PECFG_POM1LAL, pcial);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+ break;
+ }
+ j++;
+ }
+
+ /* Configure IO, always 64K starting at 0 */
+ if (hose->io_resource.flags & IORESOURCE_IO) {
+ lah = RES_TO_U32_HIGH(hose->io_base_phys);
+ lal = RES_TO_U32_LOW(hose->io_base_phys);
+ out_le32(mbase + PECFG_POM2LAH, 0);
+ out_le32(mbase + PECFG_POM2LAL, 0);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3);
+ }
+}
+
+static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
+ struct pci_controller *hose,
+ void __iomem *mbase,
+ struct resource *res)
+{
+ resource_size_t size = res->end - res->start + 1;
+ u64 sa;
+
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(size));;
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= 0x8;
+
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+ /* The setup of the split looks weird to me ... let's see if it works */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+ /* Enable inbound mapping */
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16(mbase + PCI_COMMAND,
+ in_le16(mbase + PCI_COMMAND) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+
+static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
+{
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ const int *bus_range;
+ int primary = 0, busses;
+ void __iomem *mbase = NULL, *cfg_data = NULL;
+
+ /* XXX FIXME: Handle endpoint mode properly */
+ if (port->endpoint)
+ return;
+
+ /* Check if primary bridge */
+ if (of_get_property(port->node, "primary", NULL))
+ primary = 1;
+
+ /* Get bus range if any */
+ bus_range = of_get_property(port->node, "bus-range", NULL);
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(port->node);
+ if (!hose)
+ goto fail;
+
+ /* We stick the port number in "indirect_type" so the config space
+ * ops can retrieve the port data structure easily
+ */
+ hose->indirect_type = port->index;
+
+ /* Get bus range */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Because of how big mapping the config space is (1M per bus), we
+ * limit how many busses we support. In the long run, we could replace
+ * that with something akin to kmap_atomic instead. We set aside 1 bus
+ * for the host itself too.
+ */
+ busses = hose->last_busno - hose->first_busno; /* This is off by 1 */
+ if (busses > MAX_PCIE_BUS_MAPPED) {
+ busses = MAX_PCIE_BUS_MAPPED;
+ hose->last_busno = hose->first_busno + busses;
+ }
+
+ /* We map the external config space in cfg_data and the host config
+ * space in cfg_addr. External space is 1M per bus, internal space
+ * is 4K
+ */
+ cfg_data = ioremap(port->cfg_space.start +
+ (hose->first_busno + 1) * 0x100000,
+ busses * 0x100000);
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (cfg_data == NULL || mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map config space !",
+ port->node->full_name);
+ goto fail;
+ }
+
+ hose->cfg_data = cfg_data;
+ hose->cfg_addr = mbase;
+
+ pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
+ hose->first_busno, hose->last_busno);
+ pr_debug(" config space mapped at: root @0x%p, other @0x%p\n",
+ hose->cfg_addr, hose->cfg_data);
+
+ /* Setup config space */
+ hose->ops = &ppc4xx_pciex_pci_ops;
+ port->hose = hose;
+ mbase = (void __iomem *)hose->cfg_addr;
+
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+ out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+ out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+
+ /*
+ * OMRs are already reset, also disable PIMs
+ */
+ out_le32(mbase + PECFG_PIMEN, 0);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, port->node, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pciex_POMs(port, hose, mbase);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
+
+ /* The root complex doesn't show up if we don't set some vendor
+ * and device IDs into it. Those are the same bogus one that the
+ * initial code in arch/ppc add. We might want to change that.
+ */
+ out_le16(mbase + 0x200, 0xaaa0 + port->index);
+ out_le16(mbase + 0x202, 0xbed0 + port->index);
+
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+ port->index);
+ return;
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (cfg_data)
+ iounmap(cfg_data);
+ if (mbase)
+ iounmap(mbase);
+}
+
static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
{
- /* NYI */
+ struct ppc4xx_pciex_port *port;
+ const u32 *pval;
+ int portno;
+ unsigned int dcrs;
+
+ /* First, proceed to core initialization as we assume there's
+ * only one PCIe core in the system
+ */
+ if (ppc4xx_pciex_check_core_init(np))
+ return;
+
+ /* Get the port number from the device-tree */
+ pval = of_get_property(np, "port", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: Can't find port number for %s\n",
+ np->full_name);
+ return;
+ }
+ portno = *pval;
+ if (portno >= ppc4xx_pciex_port_count) {
+ printk(KERN_ERR "PCIE: port number out of range for %s\n",
+ np->full_name);
+ return;
+ }
+ port = &ppc4xx_pciex_ports[portno];
+ port->index = portno;
+ port->node = of_node_get(np);
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+ np->full_name);
+ return;
+ }
+ port->sdr_base = *pval;
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &port->cfg_space)) {
+ printk(KERN_ERR "%s: Can't get PCI-E config space !",
+ np->full_name);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 1, &port->utl_regs)) {
+ printk(KERN_ERR "%s: Can't get UTL register base !",
+ np->full_name);
+ return;
+ }
+
+ /* Map DCRs */
+ dcrs = dcr_resource_start(np, 0);
+ if (dcrs == 0) {
+ printk(KERN_ERR "%s: Can't get DCR register base !",
+ np->full_name);
+ return;
+ }
+ port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+
+ /* Initialize the port specific registers */
+ if (ppc4xx_pciex_port_init(port))
+ return;
+
+ /* Setup the linux hose data structure */
+ ppc4xx_pciex_port_setup_hose(port);
}
+#endif /* CONFIG_PPC4xx_PCI_EXPRESS */
+
static int __init ppc4xx_pci_find_bridges(void)
{
struct device_node *np;
+#ifdef CONFIG_PPC4xx_PCI_EXPRESS
for_each_compatible_node(np, NULL, "ibm,plb-pciex")
ppc4xx_probe_pciex_bridge(np);
+#endif
for_each_compatible_node(np, NULL, "ibm,plb-pcix")
ppc4xx_probe_pcix_bridge(np);
for_each_compatible_node(np, NULL, "ibm,plb-pci")
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h
===================================================================
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:43.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:43.000000000 +1100
@@ -121,5 +121,247 @@
#define PCIL0_PTM2MS 0x38
#define PCIL0_PTM2LA 0x3c
+/*
+ * 4xx PCIe bridge register definitions
+ */
+
+/* DCR offsets */
+#define DCRO_PEGPL_CFGBAH 0x00
+#define DCRO_PEGPL_CFGBAL 0x01
+#define DCRO_PEGPL_CFGMSK 0x02
+#define DCRO_PEGPL_MSGBAH 0x03
+#define DCRO_PEGPL_MSGBAL 0x04
+#define DCRO_PEGPL_MSGMSK 0x05
+#define DCRO_PEGPL_OMR1BAH 0x06
+#define DCRO_PEGPL_OMR1BAL 0x07
+#define DCRO_PEGPL_OMR1MSKH 0x08
+#define DCRO_PEGPL_OMR1MSKL 0x09
+#define DCRO_PEGPL_OMR2BAH 0x0a
+#define DCRO_PEGPL_OMR2BAL 0x0b
+#define DCRO_PEGPL_OMR2MSKH 0x0c
+#define DCRO_PEGPL_OMR2MSKL 0x0d
+#define DCRO_PEGPL_OMR3BAH 0x0e
+#define DCRO_PEGPL_OMR3BAL 0x0f
+#define DCRO_PEGPL_OMR3MSKH 0x10
+#define DCRO_PEGPL_OMR3MSKL 0x11
+#define DCRO_PEGPL_REGBAH 0x12
+#define DCRO_PEGPL_REGBAL 0x13
+#define DCRO_PEGPL_REGMSK 0x14
+#define DCRO_PEGPL_SPECIAL 0x15
+#define DCRO_PEGPL_CFG 0x16
+#define DCRO_PEGPL_ESR 0x17
+#define DCRO_PEGPL_EARH 0x18
+#define DCRO_PEGPL_EARL 0x19
+#define DCRO_PEGPL_EATR 0x1a
+
+/* DMER mask */
+#define GPL_DMER_MASK_DISA 0x02000000
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1 0x03a0
+#define PESDR0_PLLLCT2 0x03a1
+#define PESDR0_PLLLCT3 0x03a2
+
+/*
+ * 440SPe additional DCRs
+ */
+#define PESDR0_440SPE_UTLSET1 0x0300
+#define PESDR0_440SPE_UTLSET2 0x0301
+#define PESDR0_440SPE_DLPSET 0x0302
+#define PESDR0_440SPE_LOOP 0x0303
+#define PESDR0_440SPE_RCSSET 0x0304
+#define PESDR0_440SPE_RCSSTS 0x0305
+#define PESDR0_440SPE_HSSL0SET1 0x0306
+#define PESDR0_440SPE_HSSL0SET2 0x0307
+#define PESDR0_440SPE_HSSL0STS 0x0308
+#define PESDR0_440SPE_HSSL1SET1 0x0309
+#define PESDR0_440SPE_HSSL1SET2 0x030a
+#define PESDR0_440SPE_HSSL1STS 0x030b
+#define PESDR0_440SPE_HSSL2SET1 0x030c
+#define PESDR0_440SPE_HSSL2SET2 0x030d
+#define PESDR0_440SPE_HSSL2STS 0x030e
+#define PESDR0_440SPE_HSSL3SET1 0x030f
+#define PESDR0_440SPE_HSSL3SET2 0x0310
+#define PESDR0_440SPE_HSSL3STS 0x0311
+#define PESDR0_440SPE_HSSL4SET1 0x0312
+#define PESDR0_440SPE_HSSL4SET2 0x0313
+#define PESDR0_440SPE_HSSL4STS 0x0314
+#define PESDR0_440SPE_HSSL5SET1 0x0315
+#define PESDR0_440SPE_HSSL5SET2 0x0316
+#define PESDR0_440SPE_HSSL5STS 0x0317
+#define PESDR0_440SPE_HSSL6SET1 0x0318
+#define PESDR0_440SPE_HSSL6SET2 0x0319
+#define PESDR0_440SPE_HSSL6STS 0x031a
+#define PESDR0_440SPE_HSSL7SET1 0x031b
+#define PESDR0_440SPE_HSSL7SET2 0x031c
+#define PESDR0_440SPE_HSSL7STS 0x031d
+#define PESDR0_440SPE_HSSCTLSET 0x031e
+#define PESDR0_440SPE_LANE_ABCD 0x031f
+#define PESDR0_440SPE_LANE_EFGH 0x0320
+
+#define PESDR1_440SPE_UTLSET1 0x0340
+#define PESDR1_440SPE_UTLSET2 0x0341
+#define PESDR1_440SPE_DLPSET 0x0342
+#define PESDR1_440SPE_LOOP 0x0343
+#define PESDR1_440SPE_RCSSET 0x0344
+#define PESDR1_440SPE_RCSSTS 0x0345
+#define PESDR1_440SPE_HSSL0SET1 0x0346
+#define PESDR1_440SPE_HSSL0SET2 0x0347
+#define PESDR1_440SPE_HSSL0STS 0x0348
+#define PESDR1_440SPE_HSSL1SET1 0x0349
+#define PESDR1_440SPE_HSSL1SET2 0x034a
+#define PESDR1_440SPE_HSSL1STS 0x034b
+#define PESDR1_440SPE_HSSL2SET1 0x034c
+#define PESDR1_440SPE_HSSL2SET2 0x034d
+#define PESDR1_440SPE_HSSL2STS 0x034e
+#define PESDR1_440SPE_HSSL3SET1 0x034f
+#define PESDR1_440SPE_HSSL3SET2 0x0350
+#define PESDR1_440SPE_HSSL3STS 0x0351
+#define PESDR1_440SPE_HSSCTLSET 0x0352
+#define PESDR1_440SPE_LANE_ABCD 0x0353
+
+#define PESDR2_440SPE_UTLSET1 0x0370
+#define PESDR2_440SPE_UTLSET2 0x0371
+#define PESDR2_440SPE_DLPSET 0x0372
+#define PESDR2_440SPE_LOOP 0x0373
+#define PESDR2_440SPE_RCSSET 0x0374
+#define PESDR2_440SPE_RCSSTS 0x0375
+#define PESDR2_440SPE_HSSL0SET1 0x0376
+#define PESDR2_440SPE_HSSL0SET2 0x0377
+#define PESDR2_440SPE_HSSL0STS 0x0378
+#define PESDR2_440SPE_HSSL1SET1 0x0379
+#define PESDR2_440SPE_HSSL1SET2 0x037a
+#define PESDR2_440SPE_HSSL1STS 0x037b
+#define PESDR2_440SPE_HSSL2SET1 0x037c
+#define PESDR2_440SPE_HSSL2SET2 0x037d
+#define PESDR2_440SPE_HSSL2STS 0x037e
+#define PESDR2_440SPE_HSSL3SET1 0x037f
+#define PESDR2_440SPE_HSSL3SET2 0x0380
+#define PESDR2_440SPE_HSSL3STS 0x0381
+#define PESDR2_440SPE_HSSCTLSET 0x0382
+#define PESDR2_440SPE_LANE_ABCD 0x0383
+
+/*
+ * 405EX additional DCRs
+ */
+#define PESDR0_405EX_UTLSET1 0x0400
+#define PESDR0_405EX_UTLSET2 0x0401
+#define PESDR0_405EX_DLPSET 0x0402
+#define PESDR0_405EX_LOOP 0x0403
+#define PESDR0_405EX_RCSSET 0x0404
+#define PESDR0_405EX_RCSSTS 0x0405
+#define PESDR0_405EX_PHYSET1 0x0406
+#define PESDR0_405EX_PHYSET2 0x0407
+#define PESDR0_405EX_BIST 0x0408
+#define PESDR0_405EX_LPB 0x040B
+#define PESDR0_405EX_PHYSTA 0x040C
+
+#define PESDR1_405EX_UTLSET1 0x0440
+#define PESDR1_405EX_UTLSET2 0x0441
+#define PESDR1_405EX_DLPSET 0x0442
+#define PESDR1_405EX_LOOP 0x0443
+#define PESDR1_405EX_RCSSET 0x0444
+#define PESDR1_405EX_RCSSTS 0x0445
+#define PESDR1_405EX_PHYSET1 0x0446
+#define PESDR1_405EX_PHYSET2 0x0447
+#define PESDR1_405EX_BIST 0x0448
+#define PESDR1_405EX_LPB 0x044B
+#define PESDR1_405EX_PHYSTA 0x044C
+
+/*
+ * Of the above, some are common offsets from the base
+ */
+#define PESDRn_UTLSET1 0x00
+#define PESDRn_UTLSET2 0x01
+#define PESDRn_DLPSET 0x02
+#define PESDRn_LOOP 0x03
+#define PESDRn_RCSSET 0x04
+#define PESDRn_RCSSTS 0x05
+
+/* 440spe only */
+#define PESDRn_440SPE_HSSL0SET1 0x06
+#define PESDRn_440SPE_HSSL0SET2 0x07
+#define PESDRn_440SPE_HSSL0STS 0x08
+#define PESDRn_440SPE_HSSL1SET1 0x09
+#define PESDRn_440SPE_HSSL1SET2 0x0a
+#define PESDRn_440SPE_HSSL1STS 0x0b
+#define PESDRn_440SPE_HSSL2SET1 0x0c
+#define PESDRn_440SPE_HSSL2SET2 0x0d
+#define PESDRn_440SPE_HSSL2STS 0x0e
+#define PESDRn_440SPE_HSSL3SET1 0x0f
+#define PESDRn_440SPE_HSSL3SET2 0x10
+#define PESDRn_440SPE_HSSL3STS 0x11
+
+/* 440spe port 0 only */
+#define PESDRn_440SPE_HSSL4SET1 0x12
+#define PESDRn_440SPE_HSSL4SET2 0x13
+#define PESDRn_440SPE_HSSL4STS 0x14
+#define PESDRn_440SPE_HSSL5SET1 0x15
+#define PESDRn_440SPE_HSSL5SET2 0x16
+#define PESDRn_440SPE_HSSL5STS 0x17
+#define PESDRn_440SPE_HSSL6SET1 0x18
+#define PESDRn_440SPE_HSSL6SET2 0x19
+#define PESDRn_440SPE_HSSL6STS 0x1a
+#define PESDRn_440SPE_HSSL7SET1 0x1b
+#define PESDRn_440SPE_HSSL7SET2 0x1c
+#define PESDRn_440SPE_HSSL7STS 0x1d
+
+/* 405ex only */
+#define PESDRn_405EX_PHYSET1 0x06
+#define PESDRn_405EX_PHYSET2 0x07
+#define PESDRn_405EX_PHYSTA 0x0c
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBCTL 0x00
+#define PEUTL_PBBSZ 0x20
+#define PEUTL_OPDBSZ 0x68
+#define PEUTL_IPHBSZ 0x70
+#define PEUTL_IPDBSZ 0x78
+#define PEUTL_OUTTR 0x90
+#define PEUTL_INTR 0x98
+#define PEUTL_PCTL 0xa0
+#define PEUTL_RCSTA 0xB0
+#define PEUTL_RCIRQEN 0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA 0x210
+#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2LMPA 0x220
+#define PECFG_BAR2HMPA 0x224
+
+#define PECFG_PIMEN 0x33c
+#define PECFG_PIM0LAL 0x340
+#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
+#define PECFG_POM0LAL 0x380
+#define PECFG_POM0LAH 0x384
+#define PECFG_POM1LAL 0x388
+#define PECFG_POM1LAH 0x38c
+#define PECFG_POM2LAL 0x390
+#define PECFG_POM2LAH 0x394
+
+
+enum
+{
+ PTYPE_ENDPOINT = 0x0,
+ PTYPE_LEGACY_ENDPOINT = 0x1,
+ PTYPE_ROOT_PORT = 0x4,
+
+ LNKW_X1 = 0x1,
+ LNKW_X4 = 0x4,
+ LNKW_X8 = 0x8
+};
+
#endif /* __PPC4XX_PCI_H__ */
Index: linux-merge/arch/powerpc/Kconfig
===================================================================
--- linux-merge.orig/arch/powerpc/Kconfig 2007-12-14 15:48:56.000000000 +1100
+++ linux-merge/arch/powerpc/Kconfig 2007-12-14 15:49:43.000000000 +1100
@@ -165,6 +165,7 @@ config PPC_OF_PLATFORM_PCI
source "init/Kconfig"
+source "arch/powerpc/sysdev/Kconfig"
source "arch/powerpc/platforms/Kconfig"
menu "Kernel options"
Index: linux-merge/arch/powerpc/sysdev/Kconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-merge/arch/powerpc/sysdev/Kconfig 2007-12-14 15:49:43.000000000 +1100
@@ -0,0 +1,8 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+config PPC4xx_PCI_EXPRESS
+ bool
+ depends on PCI && 4xx
+ default n
^ permalink raw reply
* [PATCH 4/21] [POWERPC] 4xx PLB to PCI 2.x support
From: Benjamin Herrenschmidt @ 2007-12-21 4:39 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
This adds to the previous patch the support for the 4xx PCI 2.x
bridges.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This version implement the basic support for the 405GP bridge,
I haven't yet looked at differences that other implementations
may have for the PCI 2.x part.
arch/powerpc/sysdev/ppc4xx_pci.c | 180 ++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/ppc4xx_pci.h | 19 ++++
2 files changed, 198 insertions(+), 1 deletion(-)
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:42.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c 2007-12-14 15:49:43.000000000 +1100
@@ -21,6 +21,36 @@ static int dma_offset_set;
/* Move that to a useable header */
extern unsigned long total_memory;
+static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ int i;
+
+ if (dev->devfn != 0 || dev->bus->self != NULL)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (hose == NULL)
+ return;
+
+ if (!of_device_is_compatible(hose->dn, "ibm,plb-pciex") &&
+ !of_device_is_compatible(hose->dn, "ibm,plb-pcix") &&
+ !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge);
+
static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
void __iomem *reg,
struct resource *res)
@@ -126,9 +156,157 @@ static int __init ppc4xx_parse_dma_range
/*
* 4xx PCI 2.x part
*/
+
+static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
+ void __iomem *reg)
+{
+ u32 la, ma, pcila, pciha;
+ int i, j;
+
+ /* Setup outbound memory windows */
+ for (i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 2) {
+ printk(KERN_WARNING "%s: Too many ranges\n",
+ hose->dn->full_name);
+ break;
+ }
+
+ /* Calculate register values */
+ la = res->start;
+#ifdef CONFIG_RESOURCES_64BIT
+ pciha = (res->start - hose->pci_mem_offset) >> 32;
+ pcila = (res->start - hose->pci_mem_offset) & 0xffffffffu;
+#else
+ pciha = 0;
+ pcila = res->start - hose->pci_mem_offset;
+#endif
+
+ ma = res->end + 1 - res->start;
+ if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ hose->dn->full_name);
+ continue;
+ }
+ ma = (0xffffffffu << ilog2(ma)) | 0x1;
+ if (res->flags & IORESOURCE_PREFETCH)
+ ma |= 0x2;
+
+ /* Program register values */
+ writel(la, reg + PCIL0_PMM0LA + (0x10 * j));
+ writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j));
+ writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j));
+ writel(ma, reg + PCIL0_PMM0MA + (0x10 * j));
+ j++;
+ }
+}
+
+static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
+ void __iomem *reg,
+ const struct resource *res)
+{
+ resource_size_t size = res->end - res->start + 1;
+ u32 sa;
+
+ /* Calculate window size */
+ sa = (0xffffffffu << ilog2(size)) | 1;
+ sa |= 0x1;
+
+ /* RAM is always at 0 local for now */
+ writel(0, reg + PCIL0_PTM1LA);
+ writel(sa, reg + PCIL0_PTM1MS);
+
+ /* Map on PCI side */
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_1, res->start);
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_2, 0x00000000);
+ early_write_config_word(hose, hose->first_busno, 0,
+ PCI_COMMAND, 0x0006);
+}
+
static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
{
/* NYI */
+ struct resource rsrc_cfg;
+ struct resource rsrc_reg;
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ void __iomem *reg = NULL;
+ const int *bus_range;
+ int primary = 0;
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+ printk(KERN_ERR "%s:Can't get PCI config register base !",
+ np->full_name);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 3, &rsrc_reg)) {
+ printk(KERN_ERR "%s: Can't get PCI internal register base !",
+ np->full_name);
+ return;
+ }
+
+ /* Check if primary bridge */
+ if (of_get_property(np, "primary", NULL))
+ primary = 1;
+
+ /* Get bus range if any */
+ bus_range = of_get_property(np, "bus-range", NULL);
+
+ /* Map registers */
+ reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start);
+ if (reg == NULL) {
+ printk(KERN_ERR "%s: Can't map registers !", np->full_name);
+ goto fail;
+ }
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(np);
+ if (!hose)
+ goto fail;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Setup config space */
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+ /* Disable all windows */
+ writel(0, reg + PCIL0_PMM0MA);
+ writel(0, reg + PCIL0_PMM1MA);
+ writel(0, reg + PCIL0_PMM2MA);
+ writel(0, reg + PCIL0_PTM1MS);
+ writel(0, reg + PCIL0_PTM2MS);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, np, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pci_PMMs(hose, reg);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pci_PTMs(hose, reg, &dma_window);
+
+ /* We don't need the registers anymore */
+ iounmap(reg);
+ return;
+
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (reg)
+ iounmap(reg);
}
/*
@@ -155,7 +333,7 @@ static void __init ppc4xx_configure_pcix
}
/* Calculate register values */
-#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_RESOURCES_64BIT
lah = res->start >> 32;
lal = res->start & 0xffffffffu;
pciah = (res->start - hose->pci_mem_offset) >> 32;
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h
===================================================================
--- linux-merge.orig/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:42.000000000 +1100
+++ linux-merge/arch/powerpc/sysdev/ppc4xx_pci.h 2007-12-14 15:49:43.000000000 +1100
@@ -101,6 +101,25 @@
#define PCIX0_MSGOH 0x10c
#define PCIX0_IM 0x1f8
+/*
+ * 4xx PCI bridge register definitions
+ */
+#define PCIL0_PMM0LA 0x00
+#define PCIL0_PMM0MA 0x04
+#define PCIL0_PMM0PCILA 0x08
+#define PCIL0_PMM0PCIHA 0x0c
+#define PCIL0_PMM1LA 0x10
+#define PCIL0_PMM1MA 0x14
+#define PCIL0_PMM1PCILA 0x18
+#define PCIL0_PMM1PCIHA 0x1c
+#define PCIL0_PMM2LA 0x20
+#define PCIL0_PMM2MA 0x24
+#define PCIL0_PMM2PCILA 0x28
+#define PCIL0_PMM2PCIHA 0x2c
+#define PCIL0_PTM1MS 0x30
+#define PCIL0_PTM1LA 0x34
+#define PCIL0_PTM2MS 0x38
+#define PCIL0_PTM2LA 0x3c
#endif /* __PPC4XX_PCI_H__ */
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox