* Re: [PATCH 1/2] Base Warp Platform support
From: Sean MacLennan @ 2008-01-08 18:59 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
In-Reply-To: <1199517639.7291.45.camel@pasglop>
*diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a3d8c..b3e4c35 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -469,7 +469,7 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
- || PPC_PS3
+ || PPC_PS3 || 44x
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h
index 0256344..9db0213 100644
--- a/arch/powerpc/boot/44x.h
+++ b/arch/powerpc/boot/44x.h
@@ -12,5 +12,6 @@
void ebony_init(void *mac0, void *mac1);
void bamboo_init(void *mac0, void *mac1);
+void warp_init(void *mac0, void *mac1);
#endif /* _PPC_BOOT_44X_H_ */
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index d1e625c..df0ef6f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -56,13 +56,13 @@ src-wlib := string.S crt0.S stdio.c main.c \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
- fsl-soc.c mpc8xx.c pq2.c
+ fsl-soc.c mpc8xx.c pq2.c warp.c
src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \
- cuboot-katmai.c cuboot-rainier.c
+ cuboot-katmai.c cuboot-rainier.c cuboot-warp.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -206,6 +206,7 @@ image-$(CONFIG_RAINIER) += cuImage.rainier
image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
+image-$(CONFIG_WARP) += cuImage.warp
endif
# For 32-bit powermacs, build the COFF and miboot images
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f1928af..ece0c71 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1226,6 +1226,18 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_4xx,
.platform = "ppc440",
},
+ { /* Matches both physical and logical PVR for 440EP (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000ff7,
+ .pvr_value = 0x400008d4,
+ .cpu_name = "440EP Rev. C",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_440ep,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc440",
+ },
{ /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
.pvr_mask = 0xf0000fff,
.pvr_value = 0x400008db,
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index d248013..21152e5 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -53,6 +53,19 @@ config RAINIER
help
This option enables support for the AMCC PPC440GRX evaluation board.
+config WARP
+ bool "PIKA Warp"
+ depends on 44x
+ default n
+ select 440EP
+ help
+ This option enables support for the PIKA Warp(tm) Appliance. The Warp
+ is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP
+ stations and trunks.
+
+ See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
+ Telephony Developers" link for more information.
+
#config LUAN
# bool "Luan"
# depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index a2a0dc1..c1733c0 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
obj-$(CONFIG_KATMAI) += katmai.o
obj-$(CONFIG_RAINIER) += rainier.o
+obj-$(CONFIG_WARP) += warp.o
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ arch/powerpc/configs/warp_defconfig 2008-01-08 12:30:27.000000000 -0500
@@ -0,0 +1,1057 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Tue Jan 8 12:23:23 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-pika"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+CONFIG_WARP=y
+CONFIG_440EP=y
+CONFIG_IBM440EP_ERR42=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="warp.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_WAIT_SCAN is not set
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_WBSD is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
*
^ permalink raw reply related
* Re: [PATCH 2/2] Base Warp Platform support
From: Sean MacLennan @ 2008-01-08 19:01 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
In-Reply-To: <1199517639.7291.45.camel@pasglop>
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ arch/powerpc/boot/cuboot-warp.c 2008-01-08 12:09:39.000000000 -0500
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+
+ warp_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ arch/powerpc/boot/dts/warp.dts 2008-01-08 12:04:10.000000000 -0500
@@ -0,0 +1,232 @@
+/*
+ * Device Tree Source for PIKA Warp
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "pika,warp";
+ compatible = "pika,warp";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440EP";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440ep";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440ep";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ DMA0: dma {
+ compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+ dcr-reg = <100 027>;
+ };
+
+ FPGA0: fpga {
+ compatible = "pika,fpga";
+ reg = <0 80000000 2200>;
+ interrupts = <18 8>;
+ interrupt-parent = <&UIC0>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <00000000 0 00000000 80000000
+ 80000000 0 80000000 80000000>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <7 4>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ /* Really spansion */
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0 ffc00000 4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0 180000>;
+ };
+ partition@180000 {
+ label = "root";
+ reg = <180000 3480000>;
+ };
+ partition@3600000 {
+ label = "user";
+ reg = <3600000 900000>;
+ };
+ partition@3f00000 {
+ label = "fpga";
+ reg = <3f00000 40000>;
+ };
+ partition@3f40000 {
+ label = "env";
+ reg = <3f40000 40000>;
+ };
+ partition@3f80000 {
+ label = "u-boot";
+ reg = <3f80000 80000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ device_type = "i2c";
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ device_type = "zmii-interface";
+ compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 1 9 1>;
+ interrupt-parent = < &UIC1 >;
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
--- /dev/null 2005-11-20 22:22:37.000000000 -0500
+++ arch/powerpc/boot/warp.c 2008-01-08 12:09:54.000000000 -0500
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+#include "ops.h"
+#include "4xx.h"
+#include "44x.h"
+
+static u8 *warp_mac0, *warp_mac1;
+
+static void warp_fixups(void)
+{
+ unsigned long sysclk = 66000000;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ ibm4xx_sdram_fixup_memsize();
+ ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+ dt_fixup_mac_addresses(warp_mac0, warp_mac1);
+}
+
+void warp_init(void *mac0, void *mac1)
+{
+ platform_ops.fixups = warp_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ warp_mac0 = mac0;
+ warp_mac1 = mac1;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
^ permalink raw reply
* Re: [PATCH] Hwmon for Taco
From: Josh Boyer @ 2008-01-08 19:02 UTC (permalink / raw)
To: Sean MacLennan; +Cc: linuxppc-dev
In-Reply-To: <4783C128.8050103@pikatech.com>
On Tue, 08 Jan 2008 13:30:00 -0500
Sean MacLennan <smaclennan@pikatech.com> wrote:
> Ok, here is the ad7414 only. taco-dtm is no more!
Cool. Couple more things.
1) This should go through the hwmon maintainer. Send it to him.
(CC'ing this list is of course fine.)
2) You always need the Signed-off-by: for each patch you send
3) If you didn't author the code (this seems to come from Stefan), then
you need the Signed-off-by from the original author.
You're getting there :) These are all "newbie" type mistakes so keep
plugging away.
josh
^ permalink raw reply
* Re: [PATCH 4/7] Device tree for MPC5121 ADS
From: Scott Wood @ 2008-01-08 19:22 UTC (permalink / raw)
To: John Rigby; +Cc: linuxppc-dev
In-Reply-To: <1199808093-15929-5-git-send-email-jrigby@freescale.com>
On Tue, Jan 08, 2008 at 09:01:30AM -0700, John Rigby wrote:
> + cpld@82000000 {
> + device_type = "board-control";
> + reg = <82000000 8000>;
> + };
Should be:
baord-control@82000000 {
compatible = "fsl,mpc5121ads-cpld";
reg = <82000000 8000>;
};
> + ref-frequency = <3ef1480>; // 66MHz ref
> + bus-frequency = <5e69ec0>; // 99MHz ips ref
Please specify these in decimal rather than hex (using the d# prefix, or
better yet /dts-v1/).
> + // IPIC
> + // interrupts cell = <intr #, sense>
> + // sense values match linux IORESOURCE_IRQ_* defines:
> + // sense == 8: Level, low assertion
> + // sense == 2: Edge, high-to-low change
> + //
> + ipic: pic@c00 {
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <2>;
> + reg = <c00 100>;
> + built-in;
> + device_type = "ipic";
> + };
Remove built-in.
-Scott
^ permalink raw reply
* [PATCH] [POWERPC] Add of_find_matching_node() helper function
From: Grant Likely @ 2008-01-08 19:20 UTC (permalink / raw)
To: linuxppc-dev
From: Grant Likely <grant.likely@secretlab.ca>
Similar to of_find_compatible_node(), of_find_matching_node() and
for_each_matching_node() allow you to iterate over the device tree
looking for specific nodes except that it accepts a of_device_id
table instead of strings.
This patch also moves of_match_node() from driver/of/device.c to
driver/of/base.c to colocate it with the of_find_matching_node which
depends on it.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/kernel/ibmebus.c | 1
arch/powerpc/kernel/of_platform.c | 1
arch/powerpc/platforms/celleb/io-workarounds.c | 1
arch/powerpc/platforms/celleb/pci.c | 1
drivers/net/ibm_newemac/core.c | 1
drivers/of/base.c | 58 ++++++++++++++++++++++++
drivers/of/device.c | 29 ------------
drivers/serial/mpc52xx_uart.c | 3 +
include/linux/of.h | 8 +++
include/linux/of_device.h | 2 -
10 files changed, 73 insertions(+), 32 deletions(-)
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index caae49f..3b70844 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -41,6 +41,7 @@
#include <linux/kobject.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/ibmebus.h>
#include <asm/abs_addr.h>
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index de36e23..7a3cafb 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -19,6 +19,7 @@
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
diff --git a/arch/powerpc/platforms/celleb/io-workarounds.c b/arch/powerpc/platforms/celleb/io-workarounds.c
index b939c0e..423339b 100644
--- a/arch/powerpc/platforms/celleb/io-workarounds.c
+++ b/arch/powerpc/platforms/celleb/io-workarounds.c
@@ -22,6 +22,7 @@
#undef DEBUG
+#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irq.h>
diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c
index 5d399e0..51b390d 100644
--- a/arch/powerpc/platforms/celleb/pci.c
+++ b/arch/powerpc/platforms/celleb/pci.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/pci_regs.h>
+#include <linux/of.h>
#include <linux/of_device.h>
#include <asm/io.h>
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index cb06280..fced441 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -37,6 +37,7 @@
#include <linux/mii.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
+#include <linux/of.h>
#include <asm/processor.h>
#include <asm/io.h>
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 9377f3b..b306fef 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -273,3 +273,61 @@ struct device_node *of_find_compatible_node(struct device_node *from,
return np;
}
EXPORT_SYMBOL(of_find_compatible_node);
+
+/**
+ * of_match_node - Tell if an device_node has a matching of_match structure
+ * @matches: array of of device match structures to search in
+ * @node: the of device structure to match against
+ *
+ * Low level utility function used by device matching.
+ */
+const struct of_device_id *of_match_node(const struct of_device_id *matches,
+ const struct device_node *node)
+{
+ while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+ int match = 1;
+ if (matches->name[0])
+ match &= node->name
+ && !strcmp(matches->name, node->name);
+ if (matches->type[0])
+ match &= node->type
+ && !strcmp(matches->type, node->type);
+ if (matches->compatible[0])
+ match &= of_device_is_compatible(node,
+ matches->compatible);
+ if (match)
+ return matches;
+ matches++;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_match_node);
+
+/**
+ * of_find_matching_node - Find a node based on an of_device_id match
+ * table.
+ * @from: The node to start searching from or NULL, the node
+ * you pass will not be searched, only the next one
+ * will; typically, you pass what the previous call
+ * returned. of_node_put() will be called on it
+ * @matches: array of of device match structures to search in
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_matching_node(struct device_node *from,
+ const struct of_device_id *matches)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ np = from ? from->allnext : allnodes;
+ for (; np; np = np->allnext) {
+ if (of_match_node(matches, np) && of_node_get(np))
+ break;
+ }
+ of_node_put(from);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_matching_node);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 6245f06..29681c4 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -10,35 +10,6 @@
#include <asm/errno.h>
/**
- * of_match_node - Tell if an device_node has a matching of_match structure
- * @ids: array of of device match structures to search in
- * @node: the of device structure to match against
- *
- * Low level utility function used by device matching.
- */
-const struct of_device_id *of_match_node(const struct of_device_id *matches,
- const struct device_node *node)
-{
- while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
- int match = 1;
- if (matches->name[0])
- match &= node->name
- && !strcmp(matches->name, node->name);
- if (matches->type[0])
- match &= node->type
- && !strcmp(matches->type, node->type);
- if (matches->compatible[0])
- match &= of_device_is_compatible(node,
- matches->compatible);
- if (match)
- return matches;
- matches++;
- }
- return NULL;
-}
-EXPORT_SYMBOL(of_match_node);
-
-/**
* of_match_device - Tell if an of_device structure has a matching
* of_match structure
* @ids: array of of device match structures to search in
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index ec36ad7..7e3ba8b 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -72,7 +72,8 @@
#include <asm/io.h>
#if defined(CONFIG_PPC_MERGE)
-#include <asm/of_platform.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#else
#include <linux/platform_device.h>
#endif
diff --git a/include/linux/of.h b/include/linux/of.h
index c65af7b..b5f33ef 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -17,6 +17,7 @@
*/
#include <linux/types.h>
#include <linux/bitops.h>
+#include <linux/mod_devicetable.h>
#include <asm/prom.h>
@@ -41,6 +42,11 @@ extern struct device_node *of_find_compatible_node(struct device_node *from,
#define for_each_compatible_node(dn, type, compatible) \
for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
dn = of_find_compatible_node(dn, type, compatible))
+extern struct device_node *of_find_matching_node(struct device_node *from,
+ const struct of_device_id *matches);
+#define for_each_matching_node(dn, matches) \
+ for (dn = of_find_matching_node(NULL, matches); dn; \
+ dn = of_find_matching_node(dn, matches))
extern struct device_node *of_find_node_by_path(const char *path);
extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_get_parent(const struct device_node *node);
@@ -60,5 +66,7 @@ extern const void *of_get_property(const struct device_node *node,
int *lenp);
extern int of_n_addr_cells(struct device_node *np);
extern int of_n_size_cells(struct device_node *np);
+extern const struct of_device_id *of_match_node(
+ const struct of_device_id *matches, const struct device_node *node);
#endif /* _LINUX_OF_H */
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 212bffb..6dc1195 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -10,8 +10,6 @@
#define to_of_device(d) container_of(d, struct of_device, dev)
-extern const struct of_device_id *of_match_node(
- const struct of_device_id *matches, const struct device_node *node);
extern const struct of_device_id *of_match_device(
const struct of_device_id *matches, const struct of_device *dev);
^ permalink raw reply related
* Re: [PATCH] Miscellaneous for Taco
From: Stefan Roese @ 2008-01-08 19:23 UTC (permalink / raw)
To: Sean MacLennan; +Cc: linuxppc-dev
In-Reply-To: <4783C3E8.3090107@pikatech.com>
On Tuesday 08 January 2008, Sean MacLennan wrote:
> How about just 44x?
>
> Cheers,
> Sean
>
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 7580aa5..682deae 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -39,6 +39,7 @@ config USB_ARCH_HAS_OHCI
> # PPC:
> default y if STB03xxx
> default y if PPC_MPC52xx
> + default y if 44x
No. Not all 44x have OHCI built in. Currently 440EP, 440EPx and 405EZ have it.
But since your patch only touches 440EP, you should just enable OHCI for
exactly this platform.
Best regards,
Stefan
^ permalink raw reply
* Re: [PATCH 3/7] Basic Freescale MPC512x support
From: Scott Wood @ 2008-01-08 19:25 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev, John Rigby
In-Reply-To: <fa686aa40801080956n20f31a54xe02328a139ac3a3b@mail.gmail.com>
On Tue, Jan 08, 2008 at 10:56:41AM -0700, Grant Likely wrote:
> On 1/8/08, Scott Wood <scottwood@freescale.com> wrote:
> > On Tue, Jan 08, 2008 at 10:19:20AM -0700, Grant Likely wrote:
> > > > +config MPC5121_ADS
> > > > + bool "Freescale MPC5121E ADS"
> > > > + select DEFAULT_UIMAGE
> > > > + help
> > > > + This option enables support for the MPC5121E ADS board.
> > >
> > > Make this depend on PPC_MULTIPLATFORM and PPC32
> >
> > I don't think PPC_MULTIPLATFORM is appropriate here... it seems to be
> > OF-specific.
>
> 52xx is multiplatform.
"multiplatform" and "PPC_MULTIPLATFORM" are not the same. The config option
is misnamed.
> It works well on both OF and non-OF boards.
It may work, but it pulls in code like prom_init.c that is not needed on
non-OF boards. It's also quite confusing to have an embedded board's
checkbox only show up when you say yes to "Generic desktop/server/laptop".
-Scott
^ permalink raw reply
* Re: [PATCH] Hwmon for Taco
From: Stefan Roese @ 2008-01-08 19:27 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Sean MacLennan
In-Reply-To: <20080108130251.7ae351c7@zod.rchland.ibm.com>
On Tuesday 08 January 2008, Josh Boyer wrote:
> On Tue, 08 Jan 2008 13:30:00 -0500
>
> Sean MacLennan <smaclennan@pikatech.com> wrote:
> > Ok, here is the ad7414 only. taco-dtm is no more!
>
> Cool. Couple more things.
>
> 1) This should go through the hwmon maintainer. Send it to him.
> (CC'ing this list is of course fine.)
>
> 2) You always need the Signed-off-by: for each patch you send
>
> 3) If you didn't author the code (this seems to come from Stefan), then
> you need the Signed-off-by from the original author.
Yes, please add my Signed-off-by on top of yours. That will make clear that I
originally wrote the code.
> You're getting there :) These are all "newbie" type mistakes so keep
> plugging away.
Right. Keep up the good work.
Thanks.
Ciao,
Stefan
^ permalink raw reply
* [PATCH 0/7] [POWERPC] Xilinx: Device Tree updates for xilinx.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
These patches synchronize all the in-kernel drivers to use the compatible names generated by the UBoot BSP generator. (at git://git.xilinx.com/gen-mhs-devtree.git)
This set of patches should all be ready for 2.6.25: I've removed the ones that weren't and cleaned up the remainder. In particular, there was a nasty code/data section mismatch in the uartlite that showed up in the microblaze. I've also added a patch for the uartlite names in the boot serial that I missed the first time around and a patch that fixes some other section mismatch warnings in the uartlite.
For reference, below is the device tree for a Virtex2Pro design. Except for some small changes mentioned before, this is entirely automatically generated from the EDK design.
Steve
/ {
mem_size_cells: #address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,virtex";
model = "testing";
DDR_256MB_32MX64_rank1_row13_col10_cl2_5: memory@0 {
device_type = "memory";
reg = < 0 memsize:10000000 >;
} ;
chosen {
bootargs = "root=/dev/nfs nfsroot=172.19.221.221:/exports/xup/ydl41 ip=dhcp console=ttyUL0";
} ;
cpus {
#address-cells = <1>;
#cpus = <1>;
#size-cells = <0>;
PowerPC,405@0 {
clock-frequency = <11e1a300>;
d-cache-line-size = <20>;
d-cache-size = <4000>;
device_type = "cpu";
i-cache-line-size = <20>;
i-cache-size = <4000>;
reg = <0>;
timebase: timebase-frequency = <11e1a300>;
xlnx,dcr-resync = <0>;
xlnx,deterministic-mult = <0>;
xlnx,disable-operand-forwarding = <1>;
xlnx,mmu-enable = <1>;
} ;
} ;
plb_v34 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,plb-v34-1.02.a";
ranges ;
Ethernet_MAC: ethernet@80400000 {
compatible = "xlnx,plb-ethernet-1.01.a";
device_type = "network";
interrupt-parent = <&opb_intc_0>;
interrupts = < 2 0 >;
local-mac-address = [ 00 00 00 00 00 00 ];
reg = < 80400000 10000 >;
xlnx,dev-blk-id = <0>;
xlnx,dev-mir-enable = <1>;
xlnx,dma-intr-coalesce = <1>;
xlnx,dma-present = <1>;
xlnx,err-count-exist = <1>;
xlnx,fcs-insert-exist = <1>;
xlnx,half-duplex-exist = <1>;
xlnx,include-dev-pencoder = <1>;
xlnx,ipif-fifo-depth = <8000>;
xlnx,mac-fifo-depth = <40>;
xlnx,mii-exist = <1>;
xlnx,miim-clkdvd = <13>;
xlnx,pad-insert-exist = <1>;
xlnx,reset-present = <1>;
xlnx,source-addr-insert-exist = <1>;
} ;
opb_v20 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,opb-v20-1.10.c";
ranges ;
Audio_Codec: opb-ac97@7d400000 {
compatible = "xlnx,opb-ac97-2.00.a";
interrupt-parent = <&opb_intc_0>;
interrupts = < 1 0 >;
reg = < 7d400000 10000 >;
xlnx,intr-level = <1>;
xlnx,playback = <1>;
xlnx,record = <1>;
xlnx,use-bram = <1>;
} ;
DIPSWs_4Bit: opb-gpio@40020000 {
compatible = "xlnx,opb-gpio-3.01.b";
reg = < 40020000 10000 >;
xlnx,all-inputs = <1>;
xlnx,all-inputs-2 = <0>;
xlnx,dout-default = <0>;
xlnx,dout-default-2 = <0>;
xlnx,gpio-width = <4>;
xlnx,interrupt-present = <0>;
xlnx,is-bidir = <1>;
xlnx,is-bidir-2 = <1>;
xlnx,is-dual = <0>;
xlnx,tri-default = <ffffffff>;
xlnx,tri-default-2 = <ffffffff>;
xlnx,user-id-code = <3>;
} ;
LEDs_4Bit: opb-gpio@40000000 {
compatible = "xlnx,opb-gpio-3.01.b";
reg = < 40000000 10000 >;
xlnx,all-inputs = <0>;
xlnx,all-inputs-2 = <0>;
xlnx,dout-default = <0>;
xlnx,dout-default-2 = <0>;
xlnx,gpio-width = <4>;
xlnx,interrupt-present = <0>;
xlnx,is-bidir = <0>;
xlnx,is-bidir-2 = <1>;
xlnx,is-dual = <0>;
xlnx,tri-default = <ffffffff>;
xlnx,tri-default-2 = <ffffffff>;
xlnx,user-id-code = <3>;
} ;
PS2_Ports: opb-ps2-dual-ref@7a400000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,compound";
ranges = < 0 7a400000 10000 >;
opb-ps2-dual-ref@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
interrupt-parent = <&opb_intc_0>;
interrupts = < 6 0 >;
reg = < 0 40 >;
} ;
opb-ps2-dual-ref@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
interrupt-parent = <&opb_intc_0>;
interrupts = < 5 0 >;
reg = < 1000 40 >;
} ;
} ;
PushButtons_5Bit: opb-gpio@40040000 {
compatible = "xlnx,opb-gpio-3.01.b";
reg = < 40040000 10000 >;
xlnx,all-inputs = <1>;
xlnx,all-inputs-2 = <0>;
xlnx,dout-default = <0>;
xlnx,dout-default-2 = <0>;
xlnx,gpio-width = <5>;
xlnx,interrupt-present = <0>;
xlnx,is-bidir = <1>;
xlnx,is-bidir-2 = <1>;
xlnx,is-dual = <0>;
xlnx,tri-default = <ffffffff>;
xlnx,tri-default-2 = <ffffffff>;
xlnx,user-id-code = <3>;
} ;
RS232_Uart_1: serial@40400000 {
compatible = "xlnx,opb-uartlite-1.00.b";
device_type = "serial";
interrupt-parent = <&opb_intc_0>;
interrupts = < 4 0 >;
port-number = <0>;
reg = < 40400000 10000 >;
xlnx,baudrate = <2580>;
xlnx,clk-freq = <5f5e100>;
xlnx,data-bits = <8>;
xlnx,odd-parity = <0>;
xlnx,use-parity = <0>;
} ;
SysACE_CompactFlash: opb-sysace@41800000 {
compatible = "xlnx,opb-sysace-1.00.c";
interrupt-parent = <&opb_intc_0>;
interrupts = < 3 0 >;
reg = < 41800000 10000 >;
xlnx,mem-width = <10>;
} ;
dcr_v29 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,dcr-v29-1.00.a";
ranges = < 0 40700000 1000 >;
VGA_FrameBuffer: plb-tft-cntlr-ref@200 {
compatible = "xlnx,plb-tft-cntlr-ref-1.00.a";
reg = < 200 8 >;
xlnx,default-tft-base-addr = <7f>;
xlnx,dps-init = <1>;
xlnx,on-init = <1>;
xlnx,pixclk-is-busclk-divby4 = <1>;
} ;
} ;
onewire_0: opb-onewire@7a200000 {
compatible = "xlnx,opb-onewire-1.00.a";
reg = < 7a200000 10000 >;
xlnx,add-pullup = "true";
xlnx,checkcrc = "true";
xlnx,clk-div = <f>;
} ;
opb_hwicap_0: opb-hwicap@41300000 {
compatible = "xlnx,opb-hwicap-1.00.b";
reg = < 41300000 10000 >;
} ;
opb_intc_0: interrupt-controller@41200000 {
#interrupt-cells = <2>;
compatible = "xlnx,opb-intc-1.00.c";
interrupt-controller ;
reg = < 41200000 10000 >;
xlnx,num-intr-inputs = <7>;
} ;
opb_timer_0: opb-timer@40800000 {
compatible = "xlnx,opb-timer-1.00.b";
interrupt-parent = <&opb_intc_0>;
interrupts = < 0 0 >;
reg = < 40800000 100 >;
xlnx,count-width = <20>;
xlnx,gen0-assert = <1>;
xlnx,gen1-assert = <1>;
xlnx,one-timer-only = <0>;
xlnx,trig0-assert = <1>;
xlnx,trig1-assert = <1>;
} ;
} ;
} ;
} ;
^ permalink raw reply
* [PATCH 6/7] [POWERPC] Xilinx: updated device tree compatibility to match uboot bsp generator.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-6-git-send-email-stephen.neuendorffer@xilinx.com>
Missed this one in the boot loader before.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
arch/powerpc/boot/serial.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index cafeece..b6c68ef 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -128,7 +128,8 @@ int serial_console_init(void)
rc = cpm_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "mpc5200-psc-uart"))
rc = mpc5200_psc_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "xilinx,uartlite"))
+ else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
+ dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
rc = uartlite_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 1/7] [POWERPC] Xilinx: Uartlite: Make console output actually work.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-1-git-send-email-stephen.neuendorffer@xilinx.com>
From: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Fixed to apply against 2.6.24-rc5, and remove DEBUG information.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
drivers/serial/uartlite.c | 121 +++++++++++++++++++++++++++++----------------
1 files changed, 79 insertions(+), 42 deletions(-)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 3f59324..71e4c0a 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -9,6 +9,8 @@
* kind, whether express or implied.
*/
+#undef DEBUG
+
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/console.h>
@@ -321,6 +323,49 @@ static struct uart_ops ulite_ops = {
.verify_port = ulite_verify_port
};
+/**
+ * ulite_get_port: Get the uart_port for a given port number and base addr
+ */
+static struct uart_port *ulite_get_port(int id)
+{
+ struct uart_port *port;
+
+ /* if id = -1; then scan for a free id and use that */
+ if (id < 0) {
+ for (id = 0; id < ULITE_NR_UARTS; id++)
+ if (ulite_ports[id].mapbase == 0)
+ break;
+ }
+
+ if ((id < 0) || (id >= ULITE_NR_UARTS)) {
+ printk(KERN_WARNING "uartlite: invalid id: %i\n", id);
+ return NULL;
+ }
+
+ /* The ID is valid, so get the address of the uart_port structure */
+ port = &ulite_ports[id];
+
+ /* Is the structure is already initialized? */
+ if (port->mapbase)
+ return port;
+
+ /* At this point, we've got an empty uart_port struct, initialize it */
+ spin_lock_init(&port->lock);
+ port->membase = NULL;
+ port->fifosize = 16;
+ port->regshift = 2;
+ port->iotype = UPIO_MEM;
+ port->iobase = 1; /* mark port in use */
+ port->ops = &ulite_ops;
+ port->irq = NO_IRQ;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = NULL;
+ port->type = PORT_UNKNOWN;
+ port->line = id;
+
+ return port;
+}
+
/* ---------------------------------------------------------------------
* Console driver operations
*/
@@ -376,7 +421,7 @@ static void ulite_console_write(struct console *co, const char *s,
}
#if defined(CONFIG_OF)
-static inline void __init ulite_console_of_find_device(int id)
+static inline u32 __init ulite_console_of_find_device(int id)
{
struct device_node *np;
struct resource res;
@@ -392,13 +437,14 @@ static inline void __init ulite_console_of_find_device(int id)
if (rc)
continue;
- ulite_ports[id].mapbase = res.start;
of_node_put(np);
- return;
+ return res.start+3;
}
+
+ return 0;
}
#else /* CONFIG_OF */
-static inline void __init ulite_console_of_find_device(int id) { /* do nothing */ }
+static inline u32 __init ulite_console_of_find_device(int id) { return 0; }
#endif /* CONFIG_OF */
static int __init ulite_console_setup(struct console *co, char *options)
@@ -408,25 +454,33 @@ static int __init ulite_console_setup(struct console *co, char *options)
int bits = 8;
int parity = 'n';
int flow = 'n';
+ u32 base;
- if (co->index < 0 || co->index >= ULITE_NR_UARTS)
- return -EINVAL;
+ /* Find a matching uart port in the device tree */
+ base = ulite_console_of_find_device(co->index);
- port = &ulite_ports[co->index];
+ /* Get the port structure */
+ port = ulite_get_port(co->index);
+ if (!port)
+ return -ENODEV;
- /* Check if it is an OF device */
- if (!port->mapbase)
- ulite_console_of_find_device(co->index);
+ /* was it initialized for this device? */
+ if (base) {
+ if ((port->mapbase) && (port->mapbase != base)) {
+ pr_debug(KERN_DEBUG "ulite: addr mismatch; %x != %x\n",
+ port->mapbase, base);
+ return -ENODEV; /* port used by another device; bail */
+ }
+ port->mapbase = base;
+ }
- /* Do we have a device now? */
- if (!port->mapbase) {
- pr_debug("console on ttyUL%i not present\n", co->index);
+ if (!port->mapbase)
return -ENODEV;
- }
- /* not initialized yet? */
+ /* registers mapped yet? */
if (!port->membase) {
- if (ulite_request_port(port))
+ port->membase = ioremap(port->mapbase, ULITE_REGION);
+ if (!port->membase)
return -ENODEV;
}
@@ -488,39 +542,22 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
struct uart_port *port;
int rc;
- /* if id = -1; then scan for a free id and use that */
- if (id < 0) {
- for (id = 0; id < ULITE_NR_UARTS; id++)
- if (ulite_ports[id].mapbase == 0)
- break;
- }
- if (id < 0 || id >= ULITE_NR_UARTS) {
- dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
- return -EINVAL;
+ port = ulite_get_port(id);
+ if (!port) {
+ dev_err(dev, "Cannot get uart_port structure\n");
+ return -ENODEV;
}
- if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
- dev_err(dev, "cannot assign to %s%i; it is already in use\n",
- ULITE_NAME, id);
- return -EBUSY;
+ /* was it initialized for this device? */
+ if ((port->mapbase) && (port->mapbase != base)) {
+ pr_debug(KERN_DEBUG "ulite: addr mismatch; %x != %x\n",
+ port->mapbase, base);
+ return -ENODEV;
}
- port = &ulite_ports[id];
-
- spin_lock_init(&port->lock);
- port->fifosize = 16;
- port->regshift = 2;
- port->iotype = UPIO_MEM;
- port->iobase = 1; /* mark port in use */
port->mapbase = base;
- port->membase = NULL;
- port->ops = &ulite_ops;
port->irq = irq;
- port->flags = UPF_BOOT_AUTOCONF;
port->dev = dev;
- port->type = PORT_UNKNOWN;
- port->line = id;
-
dev_set_drvdata(dev, port);
/* Register the port */
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 4/7] [POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-4-git-send-email-stephen.neuendorffer@xilinx.com>
Includes both flavors of plb, opb, dcr, and a pseudo 'compound' bus
for representing compound peripherals containing more than one logical
device.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
arch/powerpc/platforms/40x/virtex.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 859ba1d..7590fa5 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -15,12 +15,22 @@
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+static struct of_device_id xilinx_of_bus_ids[] = {
+ { .compatible = "xlnx,plb-v46-1.00.a", },
+ { .compatible = "xlnx,plb-v34-1.01.a", },
+ { .compatible = "xlnx,plb-v34-1.02.a", },
+ { .compatible = "xlnx,opb-v20-1.10.c", },
+ { .compatible = "xlnx,dcr-v29-1.00.a", },
+ { .compatible = "xlnx,compound", },
+ {},
+};
+
static int __init virtex_device_probe(void)
{
if (!machine_is(virtex))
return 0;
- of_platform_bus_probe(NULL, NULL, NULL);
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
return 0;
}
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 7/7] [POWERPC] Xilinx: Uartlite: Section type fixups
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-7-git-send-email-stephen.neuendorffer@xilinx.com>
All the __devexit functions are now appropriately tagged. This fixes
some ppc link warnings.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
drivers/serial/uartlite.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 02c2d89..ecd5540 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -594,7 +594,7 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
*
* @dev: pointer to device structure
*/
-static int __devinit ulite_release(struct device *dev)
+static int __devexit ulite_release(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
int rc = 0;
@@ -627,7 +627,7 @@ static int __devinit ulite_probe(struct platform_device *pdev)
return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
}
-static int ulite_remove(struct platform_device *pdev)
+static int __devexit ulite_remove(struct platform_device *pdev)
{
return ulite_release(&pdev->dev);
}
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 3/7] [POWERPC] Xilinx: Update compatible to use values generated by BSP generator.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-3-git-send-email-stephen.neuendorffer@xilinx.com>
Mainly, this involves two changes:
1) xilinx->xlnx (recognized standard is to use the stock ticker)
2) In order to have the device tree focus on describing what the
hardware is as exactly as possible, the compatible strings contain the
full IP name and IP version.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
arch/powerpc/platforms/40x/virtex.c | 2 +-
drivers/block/xsysace.c | 4 ++-
drivers/serial/uartlite.c | 43 ++++++++++++++++++++++-------------
drivers/video/xilinxfb.c | 2 +-
4 files changed, 32 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 14bbc32..859ba1d 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -30,7 +30,7 @@ static int __init virtex_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- if (!of_flat_dt_is_compatible(root, "xilinx,virtex"))
+ if (!of_flat_dt_is_compatible(root, "xlnx,virtex"))
return 0;
return 1;
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 82effce..45bc51b 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1208,7 +1208,9 @@ static int __devexit ace_of_remove(struct of_device *op)
/* Match table for of_platform binding */
static struct of_device_id __devinit ace_of_match[] = {
- { .compatible = "xilinx,xsysace", },
+ { .compatible = "xlnx,opb-sysace-1.00.b", },
+ { .compatible = "xlnx,opb-sysace-1.00.c", },
+ { .compatible = "xlnx,xps-sysace-1.00.a", },
{},
};
MODULE_DEVICE_TABLE(of, ace_of_match);
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 71e4c0a..02c2d89 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -19,10 +19,21 @@
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/init.h>
#include <asm/io.h>
#if defined(CONFIG_OF)
+#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+
+/* Match table for of_platform binding */
+static struct of_device_id __devinitdata ulite_of_match[] = {
+ { .type = "serial", .compatible = "xlnx,opb-uartlite-1.00.b", },
+ { .type = "serial", .compatible = "xlnx,xps-uartlite-1.00.a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ulite_of_match);
+
#endif
#define ULITE_NAME "ttyUL"
@@ -427,18 +438,25 @@ static inline u32 __init ulite_console_of_find_device(int id)
struct resource res;
const unsigned int *of_id;
int rc;
+ const struct of_device_id *matches = ulite_of_match;
+
+ while (matches->compatible[0]) {
+ for_each_compatible_node(np, NULL, matches->compatible) {
+ if (!of_match_node(matches, np))
+ continue;
- for_each_compatible_node(np, NULL, "xilinx,uartlite") {
- of_id = of_get_property(np, "port-number", NULL);
- if ((!of_id) || (*of_id != id))
- continue;
+ of_id = of_get_property(np, "port-number", NULL);
+ if ((!of_id) || (*of_id != id))
+ continue;
- rc = of_address_to_resource(np, 0, &res);
- if (rc)
- continue;
+ rc = of_address_to_resource(np, 0, &res);
+ if (rc)
+ continue;
- of_node_put(np);
- return res.start+3;
+ of_node_put(np);
+ return res.start+3;
+ }
+ matches++;
}
return 0;
@@ -654,13 +672,6 @@ static int __devexit ulite_of_remove(struct of_device *op)
return ulite_release(&op->dev);
}
-/* Match table for of_platform binding */
-static struct of_device_id __devinit ulite_of_match[] = {
- { .type = "serial", .compatible = "xilinx,uartlite", },
- {},
-};
-MODULE_DEVICE_TABLE(of, ulite_of_match);
-
static struct of_platform_driver ulite_of_driver = {
.owner = THIS_MODULE,
.name = "uartlite",
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index e38d3b7..9b426d3 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -460,7 +460,7 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
/* Match table for of_platform binding */
static struct of_device_id __devinit xilinxfb_of_match[] = {
- { .compatible = "xilinx,ml300-fb", },
+ { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
{},
};
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 5/7] [POWERPC] Xilinx: Update booting-without-of.
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-5-git-send-email-stephen.neuendorffer@xilinx.com>
This now better describes what the UBoot device tree generator
actually does. In particular:
1) Nodes have a label derived from the device name, and a node name
derived from a generic version of the device type, e.g. 'ethernet',
'serial', etc.
2) Usage of compound nodes (representing more than one device in the
same IP) which actually works. This requires having a valid
compatible node, and all the other things that a bus normally has.
I've chosen 'xlnx,compound' as the bus name to describe these compound
nodes.
In addition, I've clarified some of the language relating to how mhs
nodes should be represent in the device tree.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
Documentation/powerpc/booting-without-of.txt | 56 +++++++++++++++-----------
1 files changed, 33 insertions(+), 23 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index e9a3cb1..d14e45d 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2276,7 +2276,7 @@ platforms are moved over to use the flattened-device-tree model.
properties of the device node. In general, device nodes for IP-cores
will take the following form:
- (name)@(base-address) {
+ (name): (generic-name)@(base-address) {
compatible = "xlnx,(ip-core-name)-(HW_VER)"
[, (list of compatible devices), ...];
reg = <(baseaddr) (size)>;
@@ -2286,6 +2286,9 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,(parameter2) = <(int-value)>;
};
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
(ip-core-name): the name of the ip block (given after the BEGIN
directive in system.mhs). Should be in lowercase
and all underscores '_' converted to dashes '-'.
@@ -2294,9 +2297,9 @@ platforms are moved over to use the flattened-device-tree model.
dropped from the parameter name, the name is converted
to lowercase and all underscore '_' characters are
converted to dashes '-'.
- (baseaddr): the C_BASEADDR parameter.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
(HW_VER): from the HW_VER parameter.
- (size): equals C_HIGHADDR - C_BASEADDR + 1
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
Typically, the compatible list will include the exact IP core version
followed by an older IP core version which implements the same
@@ -2326,11 +2329,11 @@ platforms are moved over to use the flattened-device-tree model.
becomes the following device tree node:
- opb-uartlite-0@ec100000 {
+ opb_uartlite_0: serial@ec100000 {
device_type = "serial";
compatible = "xlnx,opb-uartlite-1.00.b";
reg = <ec100000 10000>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <1 0>; // got this from the opb_intc parameters
current-speed = <d#115200>; // standard serial device prop
clock-frequency = <d#50000000>; // standard serial device prop
@@ -2339,16 +2342,19 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,use-parity = <0>;
};
- Some IP cores actually implement 2 or more logical devices. In this case,
- the device should still describe the whole IP core with a single node
- and add a child node for each logical device. The ranges property can
- be used to translate from parent IP-core to the registers of each device.
- (Note: this makes the assumption that both logical devices have the same
- bus binding. If this is not true, then separate nodes should be used for
- each logical device). The 'cell-index' property can be used to enumerate
- logical devices within an IP core. For example, the following is the
- system.mhs entry for the dual ps2 controller found on the ml403 reference
- design.
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
BEGIN opb_ps2_dual_ref
PARAMETER INSTANCE = opb_ps2_dual_ref_0
@@ -2370,21 +2376,24 @@ platforms are moved over to use the flattened-device-tree model.
It would result in the following device tree nodes:
- opb_ps2_dual_ref_0@a9000000 {
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
ranges = <0 a9000000 2000>;
// If this device had extra parameters, then they would
// go here.
ps2@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <0 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
ps2@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <1000 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
@@ -2447,17 +2456,18 @@ platforms are moved over to use the flattened-device-tree model.
Gives this device tree (some properties removed for clarity):
- plb-v34-0 {
+ plb@0 {
#address-cells = <1>;
#size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
device_type = "ibm,plb";
ranges; // 1:1 translation
- plb-bram-if-cntrl-0@ffff0000 {
+ plb_bram_if_cntrl_0: bram@ffff0000 {
reg = <ffff0000 10000>;
}
- opb-v20-0 {
+ opb@20000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <20000000 20000000 20000000
@@ -2465,11 +2475,11 @@ platforms are moved over to use the flattened-device-tree model.
80000000 80000000 40000000
c0000000 c0000000 20000000>;
- opb-uart16550-0@a0000000 {
+ opb_uart16550_0: serial@a0000000 {
reg = <a00000000 2000>;
};
- opb-intc-0@d1000fc0 {
+ opb_intc_0: interrupt-controller@d1000fc0 {
reg = <d1000fc0 20>;
};
};
--
1.5.3.4-dirty
^ permalink raw reply related
* [PATCH 2/7] [POWERPC] Xilinx: update compatible list for interrupt controller
From: Stephen Neuendorffer @ 2008-01-08 19:35 UTC (permalink / raw)
To: grant.likely, linuxppc-dev, simekm2, jwilliams
In-Reply-To: <1199820909-32341-2-git-send-email-stephen.neuendorffer@xilinx.com>
These values now match what is generated by the uboot BSP generator.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
---
arch/powerpc/sysdev/xilinx_intc.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index c2f17cc..ba8eea2 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -135,10 +135,16 @@ void __init xilinx_intc_init_tree(void)
struct device_node *np;
/* find top level interrupt controller */
- for_each_compatible_node(np, NULL, "xilinx,intc") {
+ for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
if (!of_get_property(np, "interrupts", NULL))
break;
}
+ if (!np) {
+ for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
+ if (!of_get_property(np, "interrupts", NULL))
+ break;
+ }
+ }
/* xilinx interrupt controller needs to be top level */
BUG_ON(!np);
--
1.5.3.4-dirty
^ permalink raw reply related
* Re: [PATCH] i2c-ibm_iic driver - new patch
From: Stefan Roese @ 2008-01-08 19:33 UTC (permalink / raw)
To: Sean MacLennan; +Cc: Stephen Rothwell, Arnd Bergmann, linuxppc-dev
In-Reply-To: <4783C284.1070400@pikatech.com>
On Tuesday 08 January 2008, Sean MacLennan wrote:
> Let's try again.
Looks good now. Time to send it to the i2c mailing list <i2c@lm-sensors.org>
and the maintainer Jean Delvare <khali@linux-fr.org>. And please keep the
linuxppc-dev list on CC.
Thanks.
Ciao,
Stefan
^ permalink raw reply
* Re: [PATCH 0/7] [POWERPC] Xilinx: Device Tree updates for xilinx.
From: Grant Likely @ 2008-01-08 19:42 UTC (permalink / raw)
To: Stephen Neuendorffer; +Cc: linuxppc-dev, simekm2
In-Reply-To: <20080108193511.1A5A359005C@mail222-sin.bigfish.com>
On 1/8/08, Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> wrote:
> These patches synchronize all the in-kernel drivers to use the compatible names generated by the UBoot BSP generator. (at git://git.xilinx.com/gen-mhs-devtree.git)
>
> This set of patches should all be ready for 2.6.25: I've removed the ones that weren't and cleaned up the remainder. In particular, there was a nasty code/data section mismatch in the uartlite that showed up in the microblaze. I've also added a patch for the uartlite names in the boot serial that I missed the first time around and a patch that fixes some other section mismatch warnings in the uartlite.
>
> For reference, below is the device tree for a Virtex2Pro design. Except for some small changes mentioned before, this is entirely automatically generated from the EDK design.
Woo! Good looking device tree. :-)
I'll review your patches this afternoon.
Cheers,
g.
>
> Steve
>
> / {
> mem_size_cells: #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,virtex";
> model = "testing";
> DDR_256MB_32MX64_rank1_row13_col10_cl2_5: memory@0 {
> device_type = "memory";
> reg = < 0 memsize:10000000 >;
> } ;
> chosen {
> bootargs = "root=/dev/nfs nfsroot=172.19.221.221:/exports/xup/ydl41 ip=dhcp console=ttyUL0";
> } ;
> cpus {
> #address-cells = <1>;
> #cpus = <1>;
> #size-cells = <0>;
> PowerPC,405@0 {
> clock-frequency = <11e1a300>;
> d-cache-line-size = <20>;
> d-cache-size = <4000>;
> device_type = "cpu";
> i-cache-line-size = <20>;
> i-cache-size = <4000>;
> reg = <0>;
> timebase: timebase-frequency = <11e1a300>;
> xlnx,dcr-resync = <0>;
> xlnx,deterministic-mult = <0>;
> xlnx,disable-operand-forwarding = <1>;
> xlnx,mmu-enable = <1>;
> } ;
> } ;
> plb_v34 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,plb-v34-1.02.a";
> ranges ;
> Ethernet_MAC: ethernet@80400000 {
> compatible = "xlnx,plb-ethernet-1.01.a";
> device_type = "network";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 2 0 >;
> local-mac-address = [ 00 00 00 00 00 00 ];
> reg = < 80400000 10000 >;
> xlnx,dev-blk-id = <0>;
> xlnx,dev-mir-enable = <1>;
> xlnx,dma-intr-coalesce = <1>;
> xlnx,dma-present = <1>;
> xlnx,err-count-exist = <1>;
> xlnx,fcs-insert-exist = <1>;
> xlnx,half-duplex-exist = <1>;
> xlnx,include-dev-pencoder = <1>;
> xlnx,ipif-fifo-depth = <8000>;
> xlnx,mac-fifo-depth = <40>;
> xlnx,mii-exist = <1>;
> xlnx,miim-clkdvd = <13>;
> xlnx,pad-insert-exist = <1>;
> xlnx,reset-present = <1>;
> xlnx,source-addr-insert-exist = <1>;
> } ;
> opb_v20 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,opb-v20-1.10.c";
> ranges ;
> Audio_Codec: opb-ac97@7d400000 {
> compatible = "xlnx,opb-ac97-2.00.a";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 1 0 >;
> reg = < 7d400000 10000 >;
> xlnx,intr-level = <1>;
> xlnx,playback = <1>;
> xlnx,record = <1>;
> xlnx,use-bram = <1>;
> } ;
> DIPSWs_4Bit: opb-gpio@40020000 {
> compatible = "xlnx,opb-gpio-3.01.b";
> reg = < 40020000 10000 >;
> xlnx,all-inputs = <1>;
> xlnx,all-inputs-2 = <0>;
> xlnx,dout-default = <0>;
> xlnx,dout-default-2 = <0>;
> xlnx,gpio-width = <4>;
> xlnx,interrupt-present = <0>;
> xlnx,is-bidir = <1>;
> xlnx,is-bidir-2 = <1>;
> xlnx,is-dual = <0>;
> xlnx,tri-default = <ffffffff>;
> xlnx,tri-default-2 = <ffffffff>;
> xlnx,user-id-code = <3>;
> } ;
> LEDs_4Bit: opb-gpio@40000000 {
> compatible = "xlnx,opb-gpio-3.01.b";
> reg = < 40000000 10000 >;
> xlnx,all-inputs = <0>;
> xlnx,all-inputs-2 = <0>;
> xlnx,dout-default = <0>;
> xlnx,dout-default-2 = <0>;
> xlnx,gpio-width = <4>;
> xlnx,interrupt-present = <0>;
> xlnx,is-bidir = <0>;
> xlnx,is-bidir-2 = <1>;
> xlnx,is-dual = <0>;
> xlnx,tri-default = <ffffffff>;
> xlnx,tri-default-2 = <ffffffff>;
> xlnx,user-id-code = <3>;
> } ;
> PS2_Ports: opb-ps2-dual-ref@7a400000 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,compound";
> ranges = < 0 7a400000 10000 >;
> opb-ps2-dual-ref@0 {
> compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 6 0 >;
> reg = < 0 40 >;
> } ;
> opb-ps2-dual-ref@1000 {
> compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 5 0 >;
> reg = < 1000 40 >;
> } ;
> } ;
> PushButtons_5Bit: opb-gpio@40040000 {
> compatible = "xlnx,opb-gpio-3.01.b";
> reg = < 40040000 10000 >;
> xlnx,all-inputs = <1>;
> xlnx,all-inputs-2 = <0>;
> xlnx,dout-default = <0>;
> xlnx,dout-default-2 = <0>;
> xlnx,gpio-width = <5>;
> xlnx,interrupt-present = <0>;
> xlnx,is-bidir = <1>;
> xlnx,is-bidir-2 = <1>;
> xlnx,is-dual = <0>;
> xlnx,tri-default = <ffffffff>;
> xlnx,tri-default-2 = <ffffffff>;
> xlnx,user-id-code = <3>;
> } ;
> RS232_Uart_1: serial@40400000 {
> compatible = "xlnx,opb-uartlite-1.00.b";
> device_type = "serial";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 4 0 >;
> port-number = <0>;
> reg = < 40400000 10000 >;
> xlnx,baudrate = <2580>;
> xlnx,clk-freq = <5f5e100>;
> xlnx,data-bits = <8>;
> xlnx,odd-parity = <0>;
> xlnx,use-parity = <0>;
> } ;
> SysACE_CompactFlash: opb-sysace@41800000 {
> compatible = "xlnx,opb-sysace-1.00.c";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 3 0 >;
> reg = < 41800000 10000 >;
> xlnx,mem-width = <10>;
> } ;
> dcr_v29 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "xlnx,dcr-v29-1.00.a";
> ranges = < 0 40700000 1000 >;
> VGA_FrameBuffer: plb-tft-cntlr-ref@200 {
> compatible = "xlnx,plb-tft-cntlr-ref-1.00.a";
> reg = < 200 8 >;
> xlnx,default-tft-base-addr = <7f>;
> xlnx,dps-init = <1>;
> xlnx,on-init = <1>;
> xlnx,pixclk-is-busclk-divby4 = <1>;
> } ;
> } ;
> onewire_0: opb-onewire@7a200000 {
> compatible = "xlnx,opb-onewire-1.00.a";
> reg = < 7a200000 10000 >;
> xlnx,add-pullup = "true";
> xlnx,checkcrc = "true";
> xlnx,clk-div = <f>;
> } ;
> opb_hwicap_0: opb-hwicap@41300000 {
> compatible = "xlnx,opb-hwicap-1.00.b";
> reg = < 41300000 10000 >;
> } ;
> opb_intc_0: interrupt-controller@41200000 {
> #interrupt-cells = <2>;
> compatible = "xlnx,opb-intc-1.00.c";
> interrupt-controller ;
> reg = < 41200000 10000 >;
> xlnx,num-intr-inputs = <7>;
> } ;
> opb_timer_0: opb-timer@40800000 {
> compatible = "xlnx,opb-timer-1.00.b";
> interrupt-parent = <&opb_intc_0>;
> interrupts = < 0 0 >;
> reg = < 40800000 100 >;
> xlnx,count-width = <20>;
> xlnx,gen0-assert = <1>;
> xlnx,gen1-assert = <1>;
> xlnx,one-timer-only = <0>;
> xlnx,trig0-assert = <1>;
> xlnx,trig1-assert = <1>;
> } ;
> } ;
> } ;
> } ;
>
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* trying to boot linux on MVME5100
From: Phil Howard @ 2008-01-08 19:54 UTC (permalink / raw)
To: linuxppc-embedded
Kernel version is 2.6.23.12 compiled with gcc 4.2.1.
I have an MVME5100 board with PPC6-Bug firmware on it. I'm trying to get a
Linux kernel loaded. The first problem I see is that even though I configure
the load and execute addresses (at 00400000 or 00400004) via NIOT, doing NBO
or NBH still loads things at 00005000. The time is set and the network is
working as I can see the kernel image there in memory at 00005000. When I do
NIOT a 2nd time (actually have done it a few times) it shows by default what
I set it to, even though I have power cycled in between. So it is definitely
saved to NVRAM. But it just seems to not be using it. Here are my latest
settings:
PPC6-Bug>niot
Controller LUN =00?
Device LUN =00?
Node Control Memory Address =03F1D850?
Client IP Address =172.30.1.3?
Server IP Address =172.30.1.1?
Subnet IP Address Mask =255.255.255.0?
Broadcast IP Address =172.30.1.255?
Gateway IP Address =172.30.1.2?
Boot File Name ("NULL" for None) =mvme5100/kernel.img?
Argument File Name ("NULL" for None) =?
Boot File Load Address =003F0000?
Boot File Execution Address =00400004?
Boot File Execution Delay =00000000?
Boot File Length =00000000?
Boot File Byte Offset =00000000?
BOOTP/RARP Request Retry =00?
TFTP/ARP Request Retry =00?
Trace Character Buffer Address =00000000?
BOOTP/RARP Request Control: Always/When-Needed (A/W)=W?
BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y?
PPC6-Bug>
The other issue I have is that this is a zImage kernel, and it does not
appear to be the right format for PPC6-Bug. The first word of the text
section is not an executable instruction. From the second word it looks
fine up to about 480 bytes into it, then at 512 bytes in there are more
valid CPU instructions. Maybe some padding alignment? So what is the
right entry point address? And where should the kernel really be loaded
if zImage is right?
PPC6-Bug>nbh
Network Booting from: I82559, Controller 0, Device 0
Device Name: /pci@fe000000/pci8086,1209@e,0:0,0
Loading: mvme5100/kernel.img
Client IP Address = 172.30.1.3
Server IP Address = 172.30.1.1
Gateway IP Address = 172.30.1.2
Subnet IP Address Mask = 255.255.255.0
Boot File Name = mvme5100/kernel.img
Argument File Name =
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&1678856, Bytes Loaded =&1678856
Bytes/Second =&839428, Elapsed Time =2 Second(s)
Residual-Data Located at: $03FC26DC
IP =00005000 MSR =00003040 CR =20000004 FPSCR =00000000
R0 =00000000 R1 =03EFFE20 R2 =00000000 R3 =03FC26DC
R4 =00005000 R5 =00000000 R6 =00405030 R7 =00000000
R8 =03EFFE34 R9 =00000000 R10 =00000001 R11 =03EFFE7C
R12 =00000000 R13 =00000000 R14 =00000000 R15 =00000000
R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000
R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000
R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000
R28 =00000000 R29 =00000001 R30 =0040E228 R31 =00000001
SPR0 =00000000 SPR1 =00000000 SPR8 =00402AA0 SPR9 =00000000
00005000 7F454C46 WORD $7F454C46
PPC6-Bug>md 5000 50ff
00005000 7F454C46 01020100 00000000 00000000 .ELF............
00005010 00020014 00000001 00400200 00000034 .........@.....4
00005020 00199CA0 00008000 00340020 00040028 .........4. ...(
00005030 00090008 00000001 00010000 00400000 .............@..
00005040 00400000 00189AB8 00195C64 00000007 .@........\d....
00005050 00010000 6474E551 00000000 00000000 ....dt.Q........
00005060 00000000 00000000 00000000 00000007 ................
00005070 00000004 00000004 00000000 00000000 ................
00005080 00000000 00000000 00000000 00000000 ................
00005090 00000000 00000004 00000000 00000000 ................
000050A0 00000000 00000000 00000000 00000000 ................
000050B0 00000000 00000000 00000000 00000000 ................
000050C0 00000000 00000000 00000000 00000000 ................
000050D0 00000000 00000000 00000000 00000000 ................
000050E0 00000000 00000000 00000000 00000000 ................
000050F0 00000000 00000000 00000000 00000000 ................
PPC6-Bug>ds 15000 :20
00015000 0000E0F4 WORD $0000E0F4
00015004 9421FFF0 STWU R1,$FFFFFFF0(R1) ($03EFFE10)
00015008 7C0802A6 MFSPR R0,8
0001500C 429F0005 BCL 20,31,$00015010
00015010 BFC10008 STMW R30,$8(R1) ($03EFFE28)
00015014 7FC802A6 MFSPR R30,8
00015018 90010014 STW R0,$14(R1) ($03EFFE34)
0001501C 801EFFF0 LWZ R0,$FFFFFFF0(R30) ($0040E218)
00015020 7FC0F214 ADD R30,R0,R30
00015024 88030004 LBZ R0,$4(R3) ($03FC26E0)
00015028 2F800002 CMPI CRF7,0,R0,$2
0001502C 409E0024 BC 4,30,$00015050
00015030 817E8000 LWZ R11,$FFFF8000(R30) ($00406228)
00015034 3C00013F ADDIS R0,R0,$13F
00015038 6000FFFF ORI R0,R0,$FFFF
0001503C 812B0000 LWZ R9,$0(R11) ($03EFFE7C)
00015040 7F890040 CMPL CRF7,0,R9,R0
00015044 419D000C BC 12,29,$00015050
00015048 3C000140 ADDIS R0,R0,$140
0001504C 900B0000 STW R0,$0(R11) ($03EFFE7C)
00015050 80010014 LWZ R0,$14(R1) ($03EFFE34)
00015054 BBC10008 LMW R30,$8(R1) ($03EFFE28)
00015058 38210010 ADDI R1,R1,$10
0001505C 7C0803A6 MTSPR 8,R0
00015060 4E800020 BCLR 20,0
00015064 0000E090 WORD $0000E090
00015068 9421FFE0 STWU R1,$FFFFFFE0(R1) ($03EFFE00)
0001506C 7C0802A6 MFSPR R0,8
00015070 429F0005 BCL 20,31,$00015074
00015074 BF810010 STMW R28,$10(R1) ($03EFFE30)
00015078 7FC802A6 MFSPR R30,8
0001507C 90010024 STW R0,$24(R1) ($03EFFE44)
PPC6-Bug>
Executing at 00015004 hits a branch to 0 in just a few instructions.
Any ideas what are the proper steps with this board?
--
-----------------------------------------------------------------------------
| Phil Howard KA9WGN | http://linuxhomepage.com/ http://ham.org/ |
| (first name) at ipal.net | http://phil.ipal.org/ http://ka9wgn.ham.org/ |
-----------------------------------------------------------------------------
^ permalink raw reply
* Re: [PATCH] Hwmon for Taco
From: Anton Vorontsov @ 2008-01-08 20:13 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev, Sean MacLennan
In-Reply-To: <20080108130251.7ae351c7@zod.rchland.ibm.com>
On Tue, Jan 08, 2008 at 01:02:51PM -0600, Josh Boyer wrote:
> On Tue, 08 Jan 2008 13:30:00 -0500
> Sean MacLennan <smaclennan@pikatech.com> wrote:
>
> > Ok, here is the ad7414 only. taco-dtm is no more!
>
> Cool. Couple more things.
>
> 1) This should go through the hwmon maintainer. Send it to him.
> (CC'ing this list is of course fine.)
>
> 2) You always need the Signed-off-by: for each patch you send
>
> 3) If you didn't author the code (this seems to come from Stefan), then
> you need the Signed-off-by from the original author.
Nope. Signed-off-by means completely different thing. It isn't
copyright, it isn't authorship. It's an information (for the history)
whom to bother if code appeared to be either:
a) broken;
b) stolen from the closed source product;
c) patented (where applicable).
There are Copyright (c) and Author: strings in the files for the
credits. If original patch had these strings, then yes, you must
keep them.
But no one needs author's Signed-off-by, it having zero information
you're hinting about. More than that, there were precedents when
author insisted on removing his Signed-off-by from the modified
patch (when S-o-b used as a permit into someone's tree).
Btw, kernel.org is distributing linux tarballs without changelogs,
thus without Signed-off-by lines. Nobody complains.
Yes, it's common sense and politeness to keep Signed-off-by lines
intact (and the order of these lines), but it's not strict
requirement. "Based on the patch from ..." is the equivalent of
this politeness.
> You're getting there :) These are all "newbie" type mistakes so keep
> plugging away.
>
> josh
Good luck,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: [PATCH 7/7] Add MPC512x PSC serial driver
From: John Rigby @ 2008-01-08 17:47 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40801080932g71fb6215wc3d6df107bec7238@mail.gmail.com>
Thanks for the quick feedback Grant.
Grant Likely wrote:
> Exactly *how* different is the 5121 PSC from the 5200 PSC? If it is
> really different, then it makes sense to clone.
The fifo handling has completely changed that is the main difference.
> In fact; I'd
> duplicate the mpc52xx_psc.h file also to avoid any crossover.
>
I agree.
> However, if the differences are manegable, I'd rather see a single
> driver that can drive either type of PSC. In fact, can you post a
> diff between this driver and the original PSC driver?
>
I simple diff will mostly show the removal of arch/ppc support so
won't be much help. How about I do take a pass at a new version
that supports 52xx and 512x but only for arch/powerpc?
^ permalink raw reply
* Re: [PATCH 7/7] Add MPC512x PSC serial driver
From: Grant Likely @ 2008-01-08 20:16 UTC (permalink / raw)
To: John Rigby; +Cc: linuxppc-dev
In-Reply-To: <4783B74D.1040501@freescale.com>
On 1/8/08, John Rigby <jrigby@freescale.com> wrote:
> Thanks for the quick feedback Grant.
>
> Grant Likely wrote:
> > Exactly *how* different is the 5121 PSC from the 5200 PSC? If it is
> > really different, then it makes sense to clone.
> The fifo handling has completely changed that is the main difference.
> > In fact; I'd
> > duplicate the mpc52xx_psc.h file also to avoid any crossover.
> >
> I agree.
>
> > However, if the differences are manegable, I'd rather see a single
> > driver that can drive either type of PSC. In fact, can you post a
> > diff between this driver and the original PSC driver?
> >
> I simple diff will mostly show the removal of arch/ppc support so
> won't be much help. How about I do take a pass at a new version
> that supports 52xx and 512x but only for arch/powerpc?
I'm cool with that. arch/powerpc support has *far* surpassed arch/ppc
for the 5200, so it may be time to just let the old stuff die, even if
it is a little ahead of schedule.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH] Hwmon for Taco
From: Josh Boyer @ 2008-01-08 20:20 UTC (permalink / raw)
To: avorontsov; +Cc: linuxppc-dev, Sean MacLennan
In-Reply-To: <20080108201314.GA29127@localhost.localdomain>
On Tue, 8 Jan 2008 23:13:14 +0300
Anton Vorontsov <avorontsov@ru.mvista.com> wrote:
[snip mostly valid stuff]
> Yes, it's common sense and politeness to keep Signed-off-by lines
> intact (and the order of these lines), but it's not strict
> requirement. "Based on the patch from ..." is the equivalent of
> this politeness.
You took my statement slightly out of context (or I did a lousy job of
explaining for this case).
Basically, I _know_ that Stefan has S-o-b lines in his tree. I _know_
he did most of the work, and I _know_ he's fairly agreeable to adding
his S-o-b line to patches he isn't pushing himself.
So I was simply asking if Sean could get Stefan to add his S-o-b as
well. At the very least a "From:" would be warranted if Sean hasn't
change any code. Then authorship would still be attributed to Stefan.
Yeah, it might be "politeness" but there's really no reason to be
impolite when all the parties involved are in the same discussion...
josh
^ permalink raw reply
* Beta Release for MPC5121e Linux BSP
From: james.mertz @ 2008-01-08 20:37 UTC (permalink / raw)
To: Linuxppc-embedded
Just came across this post.
Here=E2=80=99s the link to the beta linux BSP for MPC5121e:
http://www.freescale.com/webapp/sps/site/overview.jsp?code=3DCW_BSP_PPC&fsr=
ch=3D1
James Mertz
Freescale Semiconductor
^ permalink raw reply
* Re: [PATCH] Miscellaneous for Taco
From: Benjamin Herrenschmidt @ 2008-01-08 20:41 UTC (permalink / raw)
To: Stefan Roese; +Cc: linuxppc-dev, Sean MacLennan
In-Reply-To: <200801082023.11475.sr@denx.de>
On Tue, 2008-01-08 at 20:23 +0100, Stefan Roese wrote:
> On Tuesday 08 January 2008, Sean MacLennan wrote:
> > How about just 44x?
> >
> > Cheers,
> > Sean
> >
> > diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> > index 7580aa5..682deae 100644
> > --- a/drivers/usb/Kconfig
> > +++ b/drivers/usb/Kconfig
> > @@ -39,6 +39,7 @@ config USB_ARCH_HAS_OHCI
> > # PPC:
> > default y if STB03xxx
> > default y if PPC_MPC52xx
> > + default y if 44x
>
> No. Not all 44x have OHCI built in. Currently 440EP, 440EPx and 405EZ have it.
> But since your patch only touches 440EP, you should just enable OHCI for
> exactly this platform.
Note that the above Kconfig stuff just enabling the choice to enable
OHCI, it's not enabling build of OHCI per-se.
Ben.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox