* Please pull powerpc.git for-2.6.25 branch
From: Paul Mackerras @ 2008-01-31 1:23 UTC (permalink / raw)
To: torvalds; +Cc: linuxppc-dev
Linus,
Please do
git pull \
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git for-2.6.25
to get a powerpc update for 2.6.25.
Thanks,
Paul.
Documentation/kernel-parameters.txt | 1
Documentation/powerpc/00-INDEX | 3
Documentation/powerpc/booting-without-of.txt | 367 +++
Documentation/powerpc/qe_firmware.txt | 295 +++
arch/powerpc/Kconfig | 17
arch/powerpc/Kconfig.debug | 26
arch/powerpc/Makefile | 3
arch/powerpc/boot/.gitignore | 2
arch/powerpc/boot/4xx.c | 476 ++++
arch/powerpc/boot/4xx.h | 14
arch/powerpc/boot/Makefile | 118 +
arch/powerpc/boot/bamboo.c | 6
arch/powerpc/boot/cuboot-52xx.c | 2
arch/powerpc/boot/cuboot-824x.c | 53
arch/powerpc/boot/cuboot-83xx.c | 5
arch/powerpc/boot/cuboot-85xx-cpm2.c | 66 +
arch/powerpc/boot/cuboot-85xx.c | 7
arch/powerpc/boot/cuboot-8xx.c | 2
arch/powerpc/boot/cuboot-hpc2.c | 2
arch/powerpc/boot/cuboot-katmai.c | 56 +
arch/powerpc/boot/cuboot-pq2.c | 2
arch/powerpc/boot/cuboot-rainier.c | 56 +
arch/powerpc/boot/cuboot-sequoia.c | 4
arch/powerpc/boot/cuboot-taishan.c | 54
arch/powerpc/boot/cuboot-warp.c | 39
arch/powerpc/boot/dcr.h | 59 +
arch/powerpc/boot/devtree.c | 14
arch/powerpc/boot/dtc-src/.gitignore | 3
arch/powerpc/boot/dtc-src/Makefile.dtc | 25
arch/powerpc/boot/dtc-src/checks.c | 750 +++++++
arch/powerpc/boot/dtc-src/data.c | 321 +++
arch/powerpc/boot/dtc-src/dtc-lexer.l | 328 +++
arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped | 2174 ++++++++++++++++++++
arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped | 1983 ++++++++++++++++++
arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped | 111 +
arch/powerpc/boot/dtc-src/dtc-parser.y | 336 +++
arch/powerpc/boot/dtc-src/dtc.c | 231 ++
arch/powerpc/boot/dtc-src/dtc.h | 269 ++
arch/powerpc/boot/dtc-src/flattree.c | 968 +++++++++
arch/powerpc/boot/dtc-src/fstree.c | 94 +
arch/powerpc/boot/dtc-src/livetree.c | 305 +++
arch/powerpc/boot/dtc-src/srcpos.c | 105 +
arch/powerpc/boot/dtc-src/srcpos.h | 75 +
arch/powerpc/boot/dtc-src/treesource.c | 275 +++
arch/powerpc/boot/dtc-src/version_gen.h | 1
arch/powerpc/boot/dts/adder875-redboot.dts | 184 ++
arch/powerpc/boot/dts/adder875-uboot.dts | 183 ++
arch/powerpc/boot/dts/bamboo.dts | 62 +
arch/powerpc/boot/dts/cm5200.dts | 234 ++
arch/powerpc/boot/dts/ebony.dts | 58 -
arch/powerpc/boot/dts/ep405.dts | 228 ++
arch/powerpc/boot/dts/ep8248e.dts | 207 ++
arch/powerpc/boot/dts/haleakala.dts | 274 +++
arch/powerpc/boot/dts/katmai.dts | 400 ++++
arch/powerpc/boot/dts/kilauea.dts | 99 +
arch/powerpc/boot/dts/kuroboxHD.dts | 16
arch/powerpc/boot/dts/kuroboxHG.dts | 16
arch/powerpc/boot/dts/lite5200.dts | 104 -
arch/powerpc/boot/dts/lite5200b.dts | 101 -
arch/powerpc/boot/dts/makalu.dts | 347 +++
arch/powerpc/boot/dts/motionpro.dts | 301 +++
arch/powerpc/boot/dts/mpc8313erdb.dts | 217 +-
arch/powerpc/boot/dts/mpc8315erdb.dts | 287 +++
arch/powerpc/boot/dts/mpc832x_mds.dts | 352 ++-
arch/powerpc/boot/dts/mpc832x_rdb.dts | 224 +-
arch/powerpc/boot/dts/mpc8349emitx.dts | 231 +-
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 144 +
arch/powerpc/boot/dts/mpc834x_mds.dts | 311 +--
arch/powerpc/boot/dts/mpc836x_mds.dts | 335 ++-
arch/powerpc/boot/dts/mpc8377_mds.dts | 280 +++
arch/powerpc/boot/dts/mpc8377_rdb.dts | 296 +++
arch/powerpc/boot/dts/mpc8378_mds.dts | 266 ++
arch/powerpc/boot/dts/mpc8378_rdb.dts | 282 +++
arch/powerpc/boot/dts/mpc8379_mds.dts | 294 +++
arch/powerpc/boot/dts/mpc8379_rdb.dts | 310 +++
arch/powerpc/boot/dts/mpc8540ads.dts | 59 -
arch/powerpc/boot/dts/mpc8541cds.dts | 41
arch/powerpc/boot/dts/mpc8544ds.dts | 65 -
arch/powerpc/boot/dts/mpc8548cds.dts | 68 -
arch/powerpc/boot/dts/mpc8555cds.dts | 41
arch/powerpc/boot/dts/mpc8560ads.dts | 59 -
arch/powerpc/boot/dts/mpc8568mds.dts | 104 -
arch/powerpc/boot/dts/mpc8572ds.dts | 66 -
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 256 ++
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 433 ++--
arch/powerpc/boot/dts/mpc866ads.dts | 156 +
arch/powerpc/boot/dts/rainier.dts | 353 +++
arch/powerpc/boot/dts/sbc8349.dts | 244 ++
arch/powerpc/boot/dts/sbc8548.dts | 244 ++
arch/powerpc/boot/dts/sbc8560.dts | 330 +++
arch/powerpc/boot/dts/sequoia.dts | 49
arch/powerpc/boot/dts/storcenter.dts | 141 +
arch/powerpc/boot/dts/stx_gp3_8560.dts | 228 ++
arch/powerpc/boot/dts/taishan.dts | 383 ++++
arch/powerpc/boot/dts/tqm5200.dts | 177 ++
arch/powerpc/boot/dts/tqm8540.dts | 204 ++
arch/powerpc/boot/dts/tqm8541.dts | 228 ++
arch/powerpc/boot/dts/tqm8555.dts | 228 ++
arch/powerpc/boot/dts/tqm8560.dts | 245 ++
arch/powerpc/boot/dts/walnut.dts | 55 -
arch/powerpc/boot/dts/warp.dts | 239 ++
arch/powerpc/boot/ebony.c | 64 -
arch/powerpc/boot/ep405.c | 74 +
arch/powerpc/boot/ep8248e.c | 55 +
arch/powerpc/boot/ep88xc.c | 2
arch/powerpc/boot/flatdevtree.c | 1036 ----------
arch/powerpc/boot/flatdevtree.h | 113 -
arch/powerpc/boot/flatdevtree_misc.c | 79 -
arch/powerpc/boot/holly.c | 2
arch/powerpc/boot/libfdt-wrapper.c | 193 ++
arch/powerpc/boot/libfdt/Makefile.libfdt | 14
arch/powerpc/boot/libfdt/fdt.c | 156 +
arch/powerpc/boot/libfdt/fdt.h | 60 +
arch/powerpc/boot/libfdt/fdt_ro.c | 583 +++++
arch/powerpc/boot/libfdt/fdt_rw.c | 447 ++++
arch/powerpc/boot/libfdt/fdt_strerror.c | 96 +
arch/powerpc/boot/libfdt/fdt_sw.c | 258 ++
arch/powerpc/boot/libfdt/fdt_wip.c | 144 +
arch/powerpc/boot/libfdt/libfdt.h | 721 +++++++
arch/powerpc/boot/libfdt/libfdt_internal.h | 89 +
arch/powerpc/boot/libfdt_env.h | 17
arch/powerpc/boot/main.c | 1
arch/powerpc/boot/ops.h | 27
arch/powerpc/boot/prpmc2800.c | 3
arch/powerpc/boot/ps3.c | 2
arch/powerpc/boot/redboot-8xx.c | 58 +
arch/powerpc/boot/redboot.h | 56 +
arch/powerpc/boot/reg.h | 8
arch/powerpc/boot/serial.c | 5
arch/powerpc/boot/treeboot-walnut.c | 53
arch/powerpc/boot/wrapper | 21
arch/powerpc/configs/adder875-redboot_defconfig | 629 +++---
arch/powerpc/configs/adder875-uboot_defconfig | 629 +++---
arch/powerpc/configs/bamboo_defconfig | 26
arch/powerpc/configs/celleb_defconfig | 38
arch/powerpc/configs/ebony_defconfig | 8
arch/powerpc/configs/ep405_defconfig | 543 +++--
arch/powerpc/configs/ep8248e_defconfig | 660 +++---
arch/powerpc/configs/katmai_defconfig | 389 ++--
arch/powerpc/configs/kilauea_defconfig | 74 +
arch/powerpc/configs/makalu_defconfig | 495 ++---
arch/powerpc/configs/mpc5200_defconfig | 1286 ++++++++++++
arch/powerpc/configs/mpc8313_rdb_defconfig | 48
arch/powerpc/configs/mpc8315_rdb_defconfig | 1417 +++++++++++++
arch/powerpc/configs/mpc834x_itx_defconfig | 3
arch/powerpc/configs/mpc837x_mds_defconfig | 573 +++--
arch/powerpc/configs/mpc837x_rdb_defconfig | 550 +++--
arch/powerpc/configs/mpc83xx_defconfig | 530 +++--
arch/powerpc/configs/mpc85xx_defconfig | 1523 ++++++++++++++
arch/powerpc/configs/mpc8610_hpcd_defconfig | 171 ++
arch/powerpc/configs/pasemi_defconfig | 32
arch/powerpc/configs/ppc64_defconfig | 8
arch/powerpc/configs/ps3_defconfig | 49
arch/powerpc/configs/rainier_defconfig | 474 ++--
arch/powerpc/configs/sbc834x_defconfig | 555 ++---
arch/powerpc/configs/sbc8548_defconfig | 412 +---
arch/powerpc/configs/sbc8560_defconfig | 487 ++--
arch/powerpc/configs/sequoia_defconfig | 34
arch/powerpc/configs/storcenter_defconfig | 713 +++++--
arch/powerpc/configs/stx_gp3_defconfig | 990 +++++----
arch/powerpc/configs/taishan_defconfig | 389 ++--
arch/powerpc/configs/tqm8540_defconfig | 587 +++--
arch/powerpc/configs/tqm8541_defconfig | 602 +++---
arch/powerpc/configs/tqm8555_defconfig | 602 +++---
arch/powerpc/configs/tqm8560_defconfig | 598 +++---
arch/powerpc/configs/walnut_defconfig | 94 +
arch/powerpc/configs/warp_defconfig | 1057 ++++++++++
arch/powerpc/kernel/Makefile | 13
arch/powerpc/kernel/btext.c | 2
arch/powerpc/kernel/cpu_setup_44x.S | 15
arch/powerpc/kernel/cputable.c | 149 +
arch/powerpc/kernel/crash.c | 101 +
arch/powerpc/kernel/dma_64.c | 19
arch/powerpc/kernel/head_44x.S | 14
arch/powerpc/kernel/head_64.S | 1
arch/powerpc/kernel/head_booke.h | 2
arch/powerpc/kernel/head_fsl_booke.S | 20
arch/powerpc/kernel/ibmebus.c | 12
arch/powerpc/kernel/iommu.c | 8
arch/powerpc/kernel/isa-bridge.c | 6
arch/powerpc/kernel/legacy_serial.c | 51
arch/powerpc/kernel/lparcfg.c | 12
arch/powerpc/kernel/misc.S | 73 +
arch/powerpc/kernel/misc_32.S | 56 -
arch/powerpc/kernel/misc_64.S | 7
arch/powerpc/kernel/module_32.c | 77 +
arch/powerpc/kernel/module_64.c | 81 +
arch/powerpc/kernel/of_device.c | 2
arch/powerpc/kernel/of_platform.c | 33
arch/powerpc/kernel/pci-common.c | 774 +++++++
arch/powerpc/kernel/pci_32.c | 969 ---------
arch/powerpc/kernel/pci_64.c | 444 +---
arch/powerpc/kernel/pci_dn.c | 7
arch/powerpc/kernel/ppc_ksyms.c | 1
arch/powerpc/kernel/prom.c | 52
arch/powerpc/kernel/prom_init.c | 149 +
arch/powerpc/kernel/prom_parse.c | 22
arch/powerpc/kernel/rio.c | 0
arch/powerpc/kernel/rtas_pci.c | 13
arch/powerpc/kernel/setup-common.c | 78 +
arch/powerpc/kernel/signal_32.c | 3
arch/powerpc/kernel/smp.c | 49
arch/powerpc/kernel/systbl_chk.c | 58 +
arch/powerpc/kernel/systbl_chk.sh | 33
arch/powerpc/kernel/time.c | 91 +
arch/powerpc/kernel/traps.c | 87 +
arch/powerpc/kernel/udbg.c | 7
arch/powerpc/kernel/udbg_16550.c | 43
arch/powerpc/math-emu/op-4.h | 40
arch/powerpc/mm/Makefile | 1
arch/powerpc/mm/fault.c | 8
arch/powerpc/mm/fsl_booke_mmu.c | 6
arch/powerpc/mm/hash_low_64.S | 16
arch/powerpc/mm/hash_utils_64.c | 107 +
arch/powerpc/mm/hugetlbpage.c | 119 +
arch/powerpc/mm/lmb.c | 13
arch/powerpc/mm/mem.c | 21
arch/powerpc/mm/slb.c | 3
arch/powerpc/mm/slb_low.S | 5
arch/powerpc/mm/subpage-prot.c | 213 ++
arch/powerpc/oprofile/op_model_cell.c | 20
arch/powerpc/platforms/40x/Kconfig | 40
arch/powerpc/platforms/40x/Makefile | 2
arch/powerpc/platforms/40x/ep405.c | 123 +
arch/powerpc/platforms/40x/kilauea.c | 10
arch/powerpc/platforms/40x/makalu.c | 58 +
arch/powerpc/platforms/40x/virtex.c | 17
arch/powerpc/platforms/40x/walnut.c | 12
arch/powerpc/platforms/44x/Kconfig | 61 +
arch/powerpc/platforms/44x/Makefile | 7
arch/powerpc/platforms/44x/bamboo.c | 11
arch/powerpc/platforms/44x/ebony.c | 12
arch/powerpc/platforms/44x/katmai.c | 63 +
arch/powerpc/platforms/44x/rainier.c | 62 +
arch/powerpc/platforms/44x/sequoia.c | 11
arch/powerpc/platforms/44x/taishan.c | 73 +
arch/powerpc/platforms/44x/warp-nand.c | 105 +
arch/powerpc/platforms/44x/warp.c | 153 +
arch/powerpc/platforms/52xx/Kconfig | 50
arch/powerpc/platforms/52xx/Makefile | 1
arch/powerpc/platforms/52xx/efika.c | 3
arch/powerpc/platforms/52xx/lite5200.c | 46
arch/powerpc/platforms/52xx/lite5200_pm.c | 13
arch/powerpc/platforms/52xx/mpc5200_simple.c | 85 +
arch/powerpc/platforms/52xx/mpc52xx_common.c | 154 +
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 20
arch/powerpc/platforms/52xx/mpc52xx_pic.c | 22
arch/powerpc/platforms/52xx/mpc52xx_pm.c | 15
arch/powerpc/platforms/82xx/Kconfig | 13
arch/powerpc/platforms/82xx/Makefile | 1
arch/powerpc/platforms/82xx/ep8248e.c | 324 +++
arch/powerpc/platforms/82xx/mpc8272_ads.c | 5
arch/powerpc/platforms/82xx/pq2.c | 4
arch/powerpc/platforms/82xx/pq2fads.c | 7
arch/powerpc/platforms/83xx/Kconfig | 63 -
arch/powerpc/platforms/83xx/Makefile | 5
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 51
arch/powerpc/platforms/83xx/mpc832x_mds.c | 20
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 23
arch/powerpc/platforms/83xx/mpc834x_itx.c | 12
arch/powerpc/platforms/83xx/mpc834x_mds.c | 18
arch/powerpc/platforms/83xx/mpc836x_mds.c | 20
arch/powerpc/platforms/83xx/mpc837x_mds.c | 147 +
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 99 +
arch/powerpc/platforms/83xx/mpc83xx.h | 3
arch/powerpc/platforms/83xx/pci.c | 2
arch/powerpc/platforms/83xx/sbc834x.c | 115 +
arch/powerpc/platforms/83xx/usb.c | 50
arch/powerpc/platforms/85xx/Kconfig | 87 +
arch/powerpc/platforms/85xx/Makefile | 4
arch/powerpc/platforms/85xx/mpc85xx_ads.c | 18
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 6
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 43
arch/powerpc/platforms/85xx/sbc8548.c | 167 ++
arch/powerpc/platforms/85xx/sbc8560.c | 283 +++
arch/powerpc/platforms/85xx/stx_gp3.c | 183 ++
arch/powerpc/platforms/85xx/tqm85xx.c | 187 ++
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 17
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 16
arch/powerpc/platforms/8xx/Kconfig | 10
arch/powerpc/platforms/8xx/Makefile | 1
arch/powerpc/platforms/8xx/adder875.c | 118 +
arch/powerpc/platforms/8xx/ep88xc.c | 10
arch/powerpc/platforms/8xx/m8xx_setup.c | 13
arch/powerpc/platforms/8xx/mpc86xads.h | 44
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 294 +--
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 12
arch/powerpc/platforms/8xx/mpc8xx.h | 21
arch/powerpc/platforms/Kconfig | 18
arch/powerpc/platforms/Kconfig.cputype | 11
arch/powerpc/platforms/cell/Makefile | 2
arch/powerpc/platforms/cell/cbe_cpufreq.c | 3
arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c | 3
arch/powerpc/platforms/cell/cbe_regs.c | 5
arch/powerpc/platforms/cell/io-workarounds.c | 9
arch/powerpc/platforms/cell/iommu.c | 398 +++-
arch/powerpc/platforms/cell/pmu.c | 7
arch/powerpc/platforms/cell/setup.c | 7
arch/powerpc/platforms/cell/smp.c | 3
arch/powerpc/platforms/cell/spu_base.c | 224 +-
arch/powerpc/platforms/cell/spu_fault.c | 98 +
arch/powerpc/platforms/cell/spu_manage.c | 28
arch/powerpc/platforms/cell/spufs/Makefile | 2
arch/powerpc/platforms/cell/spufs/backing_ops.c | 31
arch/powerpc/platforms/cell/spufs/context.c | 53
arch/powerpc/platforms/cell/spufs/coredump.c | 8
arch/powerpc/platforms/cell/spufs/fault.c | 187 +-
arch/powerpc/platforms/cell/spufs/file.c | 429 +++-
arch/powerpc/platforms/cell/spufs/hw_ops.c | 33
arch/powerpc/platforms/cell/spufs/lscsa_alloc.c | 4
arch/powerpc/platforms/cell/spufs/run.c | 190 +-
arch/powerpc/platforms/cell/spufs/sched.c | 361 ++-
arch/powerpc/platforms/cell/spufs/spufs.h | 64 -
arch/powerpc/platforms/cell/spufs/switch.c | 73 -
arch/powerpc/platforms/celleb/Kconfig | 2
arch/powerpc/platforms/celleb/io-workarounds.c | 7
arch/powerpc/platforms/celleb/iommu.c | 26
arch/powerpc/platforms/celleb/pci.c | 14
arch/powerpc/platforms/celleb/scc_epci.c | 2
arch/powerpc/platforms/celleb/scc_uhc.c | 3
arch/powerpc/platforms/celleb/setup.c | 147 +
arch/powerpc/platforms/chrp/pci.c | 6
arch/powerpc/platforms/chrp/setup.c | 65 +
arch/powerpc/platforms/embedded6xx/Kconfig | 23
arch/powerpc/platforms/embedded6xx/Makefile | 1
arch/powerpc/platforms/embedded6xx/holly.c | 3
arch/powerpc/platforms/embedded6xx/ls_uart.c | 5
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 2
arch/powerpc/platforms/embedded6xx/storcenter.c | 192 ++
arch/powerpc/platforms/iseries/Makefile | 2
arch/powerpc/platforms/iseries/iommu.c | 4
arch/powerpc/platforms/iseries/lpevents.c | 2
arch/powerpc/platforms/iseries/pci.c | 670 ++++--
arch/powerpc/platforms/iseries/pci.h | 27
arch/powerpc/platforms/iseries/setup.c | 61 -
arch/powerpc/platforms/iseries/setup.h | 1
arch/powerpc/platforms/iseries/vpdinfo.c | 275 ---
arch/powerpc/platforms/maple/Kconfig | 1
arch/powerpc/platforms/maple/pci.c | 2
arch/powerpc/platforms/maple/setup.c | 2
arch/powerpc/platforms/pasemi/Kconfig | 12
arch/powerpc/platforms/pasemi/Makefile | 1
arch/powerpc/platforms/pasemi/cpufreq.c | 19
arch/powerpc/platforms/pasemi/electra_ide.c | 96 -
arch/powerpc/platforms/pasemi/gpio_mdio.c | 96 +
arch/powerpc/platforms/pasemi/idle.c | 5
arch/powerpc/platforms/pasemi/pasemi.h | 6
arch/powerpc/platforms/pasemi/powersave.S | 11
arch/powerpc/platforms/pasemi/setup.c | 61 -
arch/powerpc/platforms/powermac/low_i2c.c | 10
arch/powerpc/platforms/powermac/pci.c | 248 +-
arch/powerpc/platforms/powermac/pfunc_base.c | 3
arch/powerpc/platforms/powermac/pic.c | 3
arch/powerpc/platforms/powermac/pmac.h | 2
arch/powerpc/platforms/powermac/setup.c | 21
arch/powerpc/platforms/powermac/time.c | 2
arch/powerpc/platforms/ps3/Kconfig | 24
arch/powerpc/platforms/ps3/device-init.c | 531 +++--
arch/powerpc/platforms/ps3/mm.c | 24
arch/powerpc/platforms/ps3/platform.h | 34
arch/powerpc/platforms/ps3/repository.c | 320 ++-
arch/powerpc/platforms/ps3/spu.c | 27
arch/powerpc/platforms/ps3/system-bus.c | 19
arch/powerpc/platforms/pseries/eeh.c | 46
arch/powerpc/platforms/pseries/eeh_driver.c | 19
arch/powerpc/platforms/pseries/iommu.c | 28
arch/powerpc/platforms/pseries/pci_dlpar.c | 14
arch/powerpc/platforms/pseries/plpar_wrappers.h | 5
arch/powerpc/platforms/pseries/smp.c | 3
arch/powerpc/platforms/pseries/xics.c | 59 -
arch/powerpc/platforms/pseries/xics.h | 3
arch/powerpc/sysdev/Kconfig | 8
arch/powerpc/sysdev/Makefile | 13
arch/powerpc/sysdev/axonram.c | 5
arch/powerpc/sysdev/bestcomm/bestcomm.c | 16
arch/powerpc/sysdev/bestcomm/bestcomm.h | 2
arch/powerpc/sysdev/commproc.h | 12
arch/powerpc/sysdev/cpm1.c | 71 -
arch/powerpc/sysdev/cpm2.c | 28
arch/powerpc/sysdev/fsl_pci.c | 154 +
arch/powerpc/sysdev/fsl_rio.c | 0
arch/powerpc/sysdev/fsl_rio.h | 0
arch/powerpc/sysdev/fsl_soc.c | 232 ++
arch/powerpc/sysdev/grackle.c | 2
arch/powerpc/sysdev/ipic.c | 287 ++-
arch/powerpc/sysdev/ipic.h | 13
arch/powerpc/sysdev/micropatch.c | 2
arch/powerpc/sysdev/mmio_nvram.c | 2
arch/powerpc/sysdev/mpc8xx_pic.c | 1
arch/powerpc/sysdev/mpic.c | 70 +
arch/powerpc/sysdev/mpic.h | 10
arch/powerpc/sysdev/mpic_pasemi_msi.c | 172 ++
arch/powerpc/sysdev/mv64x60_dev.c | 24
arch/powerpc/sysdev/mv64x60_pci.c | 4
arch/powerpc/sysdev/mv64x60_udbg.c | 4
arch/powerpc/sysdev/of_rtc.c | 59 +
arch/powerpc/sysdev/pmi.c | 4
arch/powerpc/sysdev/ppc4xx_pci.c | 1528 ++++++++++++++
arch/powerpc/sysdev/ppc4xx_pci.h | 369 +++
arch/powerpc/sysdev/qe_lib/Kconfig | 2
arch/powerpc/sysdev/qe_lib/qe.c | 356 +++
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 10
arch/powerpc/sysdev/tsi108_dev.c | 9
arch/powerpc/sysdev/uic.c | 132 -
arch/powerpc/sysdev/xilinx_intc.c | 8
arch/powerpc/xmon/setjmp.S | 61 -
arch/powerpc/xmon/xmon.c | 75 +
arch/ppc/8260_io/enet.c | 2
arch/ppc/8xx_io/commproc.c | 40
arch/ppc/8xx_io/enet.c | 6
arch/ppc/8xx_io/fec.c | 2
arch/ppc/8xx_io/micropatch.c | 2
arch/ppc/Kconfig | 91 -
arch/ppc/Makefile | 9
arch/ppc/boot/simple/iic.c | 2
arch/ppc/boot/simple/m8xx_tty.c | 2
arch/ppc/configs/TQM8541_defconfig | 986 ---------
arch/ppc/configs/TQM8555_defconfig | 983 ---------
arch/ppc/configs/mpc834x_sys_defconfig | 844 --------
arch/ppc/configs/mpc8540_ads_defconfig | 706 ------
arch/ppc/configs/mpc8548_cds_defconfig | 658 ------
arch/ppc/configs/mpc8555_cds_defconfig | 784 -------
arch/ppc/configs/mpc8560_ads_defconfig | 769 -------
arch/ppc/kernel/Makefile | 2
arch/ppc/kernel/asm-offsets.c | 6
arch/ppc/kernel/entry.S | 12
arch/ppc/kernel/head_44x.S | 2
arch/ppc/kernel/head_booke.h | 55 -
arch/ppc/kernel/head_fsl_booke.S | 1065 ----------
arch/ppc/kernel/misc.S | 46
arch/ppc/kernel/ppc_ksyms.c | 11
arch/ppc/kernel/setup.c | 4
arch/ppc/kernel/traps.c | 185 --
arch/ppc/mm/44x_mmu.c | 51
arch/ppc/mm/Makefile | 1
arch/ppc/mm/fsl_booke_mmu.c | 236 --
arch/ppc/mm/init.c | 6
arch/ppc/mm/mmu_context.c | 2
arch/ppc/mm/mmu_decl.h | 6
arch/ppc/mm/pgtable.c | 28
arch/ppc/mm/ppc_mmu.c | 2
arch/ppc/platforms/83xx/Makefile | 4
arch/ppc/platforms/83xx/mpc834x_sys.c | 326 ---
arch/ppc/platforms/83xx/mpc834x_sys.h | 54
arch/ppc/platforms/85xx/Kconfig | 106 -
arch/ppc/platforms/85xx/Makefile | 13
arch/ppc/platforms/85xx/mpc8540_ads.c | 226 --
arch/ppc/platforms/85xx/mpc8540_ads.h | 22
arch/ppc/platforms/85xx/mpc8555_cds.h | 23
arch/ppc/platforms/85xx/mpc8560_ads.c | 303 ---
arch/ppc/platforms/85xx/mpc8560_ads.h | 24
arch/ppc/platforms/85xx/mpc85xx_ads_common.c | 198 --
arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 67 -
arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 601 ------
arch/ppc/platforms/85xx/mpc85xx_cds_common.h | 80 -
arch/ppc/platforms/85xx/sbc8560.c | 234 --
arch/ppc/platforms/85xx/sbc8560.h | 47
arch/ppc/platforms/85xx/sbc85xx.c | 166 --
arch/ppc/platforms/85xx/sbc85xx.h | 70 -
arch/ppc/platforms/85xx/stx_gp3.c | 340 ---
arch/ppc/platforms/85xx/stx_gp3.h | 69 -
arch/ppc/platforms/85xx/tqm85xx.c | 391 ----
arch/ppc/platforms/85xx/tqm85xx.h | 53
arch/ppc/platforms/ev64260.c | 4
arch/ppc/platforms/mpc866ads_setup.c | 2
arch/ppc/platforms/mpc885ads_setup.c | 2
arch/ppc/platforms/prep_pci.c | 1
arch/ppc/syslib/Makefile | 14
arch/ppc/syslib/gt64260_pic.c | 1
arch/ppc/syslib/ipic.c | 646 ------
arch/ppc/syslib/ipic.h | 47
arch/ppc/syslib/mpc52xx_pic.c | 1
arch/ppc/syslib/mpc52xx_setup.c | 36
arch/ppc/syslib/mpc83xx_devices.c | 251 --
arch/ppc/syslib/mpc83xx_sys.c | 122 -
arch/ppc/syslib/mpc85xx_devices.c | 826 --------
arch/ppc/syslib/mpc85xx_sys.c | 233 --
arch/ppc/syslib/mpc8xx_devices.c | 2
arch/ppc/syslib/mv64360_pic.c | 1
arch/ppc/syslib/ocp.c | 4
arch/ppc/syslib/open_pic.c | 2
arch/ppc/syslib/ppc83xx_pci.h | 151 -
arch/ppc/syslib/ppc83xx_setup.c | 411 ----
arch/ppc/syslib/ppc83xx_setup.h | 55 -
arch/ppc/syslib/ppc85xx_common.c | 38
arch/ppc/syslib/ppc85xx_common.h | 22
arch/ppc/syslib/ppc85xx_setup.c | 367 ---
arch/ppc/syslib/ppc85xx_setup.h | 56 -
arch/ppc/syslib/ppc8xx_pic.c | 2
arch/ppc/syslib/ppc8xx_pic.h | 1
arch/ppc/syslib/ppc_sys.c | 2
arch/ppc/xmon/start.c | 1
arch/ppc/xmon/start_8xx.c | 2
drivers/ata/Kconfig | 14
drivers/ata/Makefile | 1
drivers/ata/pata_mpc52xx.c | 6
drivers/ata/pata_of_platform.c | 114 +
drivers/ata/pata_platform.c | 144 +
drivers/char/hw_random/Kconfig | 2
drivers/char/hw_random/pasemi-rng.c | 7
drivers/edac/pasemi_edac.c | 4
drivers/macintosh/adb.c | 174 +-
drivers/macintosh/mediabay.c | 14
drivers/macintosh/therm_adt746x.c | 24
drivers/macintosh/therm_pm72.c | 64 -
drivers/macintosh/therm_windtunnel.c | 42
drivers/macintosh/via-pmu-backlight.c | 48
drivers/macintosh/via-pmu.c | 664 ++----
drivers/net/Kconfig | 2
drivers/net/fec_8xx/fec_8xx-netta.c | 2
drivers/net/fec_8xx/fec_main.c | 2
drivers/net/fec_8xx/fec_mii.c | 2
drivers/net/fec_mpc52xx.c | 6
drivers/net/fec_mpc52xx_phy.c | 8
drivers/net/fs_enet/fs_enet-main.c | 9
drivers/net/fs_enet/fs_enet.h | 2
drivers/net/fs_enet/mac-fcc.c | 10
drivers/net/fs_enet/mac-fec.c | 2
drivers/net/fs_enet/mac-scc.c | 13
drivers/net/ibm_newemac/core.c | 1
drivers/net/phy/Kconfig | 32
drivers/net/phy/fixed.c | 445 ++--
drivers/net/ps3_gelic_net.c | 4
drivers/net/ucc_geth.c | 55 -
drivers/net/ucc_geth_mii.c | 3
drivers/of/base.c | 58 +
drivers/of/device.c | 29
drivers/pci/Makefile | 2
drivers/pci/hotplug/rpadlpar_core.c | 2
drivers/ps3/Makefile | 1
drivers/ps3/ps3-lpm.c | 1248 +++++++++++
drivers/ps3/ps3-sys-manager.c | 14
drivers/ps3/ps3-vuart.c | 38
drivers/rapidio/rio.c | 5
drivers/serial/Kconfig | 10
drivers/serial/Makefile | 1
drivers/serial/cpm_uart/cpm_uart_cpm1.c | 6
drivers/serial/cpm_uart/cpm_uart_cpm1.h | 2
drivers/serial/cpm_uart/cpm_uart_cpm2.c | 10
drivers/serial/mpc52xx_uart.c | 217 +-
drivers/serial/uartlite.c | 6
drivers/serial/ucc_uart.c | 1514 ++++++++++++++
drivers/spi/mpc52xx_psc_spi.c | 77 -
drivers/spi/spi_mpc83xx.c | 6
drivers/usb/host/ohci-ppc-of.c | 2
include/asm-powerpc/8xx_immap.h | 2
include/asm-powerpc/cpm.h | 74 +
include/asm-powerpc/cpm1.h | 79 -
include/asm-powerpc/cpm2.h | 64 -
include/asm-powerpc/cputable.h | 13
include/asm-powerpc/cputhreads.h | 71 +
include/asm-powerpc/dcr-native.h | 30
include/asm-powerpc/dcr-regs.h | 71 +
include/asm-powerpc/dma-mapping.h | 10
include/asm-powerpc/firmware.h | 2
include/asm-powerpc/immap_86xx.h | 25
include/asm-powerpc/immap_qe.h | 34
include/asm-powerpc/io.h | 5
include/asm-powerpc/iommu.h | 3
include/asm-powerpc/ipic.h | 12
include/asm-powerpc/irq.h | 212 --
include/asm-powerpc/iseries/hv_lp_event.h | 2
include/asm-powerpc/kexec.h | 3
include/asm-powerpc/lmb.h | 1
include/asm-powerpc/machdep.h | 58 -
include/asm-powerpc/mmu-hash64.h | 7
include/asm-powerpc/mpc52xx.h | 16
include/asm-powerpc/mpc52xx_psc.h | 3
include/asm-powerpc/mpc8260.h | 1
include/asm-powerpc/mpc8xx.h | 20
include/asm-powerpc/mpic.h | 20
include/asm-powerpc/nvram.h | 11
include/asm-powerpc/of_platform.h | 14
include/asm-powerpc/pci-bridge.h | 199 +-
include/asm-powerpc/pci.h | 29
include/asm-powerpc/pgalloc-64.h | 5
include/asm-powerpc/pgtable-64k.h | 39
include/asm-powerpc/ppc-pci.h | 4
include/asm-powerpc/prom.h | 4
include/asm-powerpc/ps3.h | 74 +
include/asm-powerpc/ptrace.h | 3
include/asm-powerpc/qe.h | 156 +
include/asm-powerpc/reg.h | 7
include/asm-powerpc/reg_booke.h | 18
include/asm-powerpc/setjmp.h | 18
include/asm-powerpc/smu.h | 142 +
include/asm-powerpc/sparsemem.h | 5
include/asm-powerpc/spu.h | 28
include/asm-powerpc/spu_csa.h | 13
include/asm-powerpc/spu_priv1.h | 15
include/asm-powerpc/systbl.h | 1
include/asm-powerpc/system.h | 2
include/asm-powerpc/udbg.h | 1
include/asm-powerpc/unistd.h | 3
include/asm-ppc/8xx_immap.h | 2
include/asm-ppc/cpm1.h | 14
include/asm-ppc/cpm2.h | 2
include/asm-ppc/immap_85xx.h | 126 -
include/asm-ppc/mmu.h | 6
include/asm-ppc/mmu_context.h | 5
include/asm-ppc/mpc52xx_psc.h | 3
include/asm-ppc/mpc83xx.h | 107 -
include/asm-ppc/mpc85xx.h | 192 --
include/asm-ppc/pgtable.h | 46
include/asm-ppc/ppc_sys.h | 4
include/asm-ppc/ppcboot.h | 8
include/asm-ppc/reg_booke.h | 30
include/asm-ppc/serial.h | 4
include/linux/of.h | 12
include/linux/of_device.h | 2
include/linux/pata_platform.h | 9
include/linux/phy_fixed.h | 51
include/linux/pmu.h | 36
kernel/sys_ni.c | 1
615 files changed, 51820 insertions(+), 30363 deletions(-)
create mode 100644 Documentation/powerpc/qe_firmware.txt
create mode 100644 arch/powerpc/boot/cuboot-824x.c
create mode 100644 arch/powerpc/boot/cuboot-85xx-cpm2.c
create mode 100644 arch/powerpc/boot/cuboot-katmai.c
create mode 100644 arch/powerpc/boot/cuboot-rainier.c
create mode 100644 arch/powerpc/boot/cuboot-taishan.c
create mode 100644 arch/powerpc/boot/cuboot-warp.c
create mode 100644 arch/powerpc/boot/dtc-src/.gitignore
create mode 100644 arch/powerpc/boot/dtc-src/Makefile.dtc
create mode 100644 arch/powerpc/boot/dtc-src/checks.c
create mode 100644 arch/powerpc/boot/dtc-src/data.c
create mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.l
create mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
create mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
create mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
create mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.y
create mode 100644 arch/powerpc/boot/dtc-src/dtc.c
create mode 100644 arch/powerpc/boot/dtc-src/dtc.h
create mode 100644 arch/powerpc/boot/dtc-src/flattree.c
create mode 100644 arch/powerpc/boot/dtc-src/fstree.c
create mode 100644 arch/powerpc/boot/dtc-src/livetree.c
create mode 100644 arch/powerpc/boot/dtc-src/srcpos.c
create mode 100644 arch/powerpc/boot/dtc-src/srcpos.h
create mode 100644 arch/powerpc/boot/dtc-src/treesource.c
create mode 100644 arch/powerpc/boot/dtc-src/version_gen.h
create mode 100644 arch/powerpc/boot/dts/adder875-redboot.dts
create mode 100644 arch/powerpc/boot/dts/adder875-uboot.dts
create mode 100644 arch/powerpc/boot/dts/cm5200.dts
create mode 100644 arch/powerpc/boot/dts/ep405.dts
create mode 100644 arch/powerpc/boot/dts/ep8248e.dts
create mode 100644 arch/powerpc/boot/dts/haleakala.dts
create mode 100644 arch/powerpc/boot/dts/katmai.dts
create mode 100644 arch/powerpc/boot/dts/makalu.dts
create mode 100644 arch/powerpc/boot/dts/motionpro.dts
create mode 100644 arch/powerpc/boot/dts/mpc8315erdb.dts
create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
create mode 100644 arch/powerpc/boot/dts/mpc8377_rdb.dts
create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
create mode 100644 arch/powerpc/boot/dts/mpc8378_rdb.dts
create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
create mode 100644 arch/powerpc/boot/dts/mpc8379_rdb.dts
create mode 100644 arch/powerpc/boot/dts/rainier.dts
create mode 100644 arch/powerpc/boot/dts/sbc8349.dts
create mode 100644 arch/powerpc/boot/dts/sbc8548.dts
create mode 100644 arch/powerpc/boot/dts/sbc8560.dts
create mode 100644 arch/powerpc/boot/dts/storcenter.dts
create mode 100644 arch/powerpc/boot/dts/stx_gp3_8560.dts
create mode 100644 arch/powerpc/boot/dts/taishan.dts
create mode 100644 arch/powerpc/boot/dts/tqm5200.dts
create mode 100644 arch/powerpc/boot/dts/tqm8540.dts
create mode 100644 arch/powerpc/boot/dts/tqm8541.dts
create mode 100644 arch/powerpc/boot/dts/tqm8555.dts
create mode 100644 arch/powerpc/boot/dts/tqm8560.dts
create mode 100644 arch/powerpc/boot/dts/warp.dts
create mode 100644 arch/powerpc/boot/ep405.c
create mode 100644 arch/powerpc/boot/ep8248e.c
delete mode 100644 arch/powerpc/boot/flatdevtree.c
delete mode 100644 arch/powerpc/boot/flatdevtree.h
delete mode 100644 arch/powerpc/boot/flatdevtree_misc.c
create mode 100644 arch/powerpc/boot/libfdt-wrapper.c
create mode 100644 arch/powerpc/boot/libfdt/Makefile.libfdt
create mode 100644 arch/powerpc/boot/libfdt/fdt.c
create mode 100644 arch/powerpc/boot/libfdt/fdt.h
create mode 100644 arch/powerpc/boot/libfdt/fdt_ro.c
create mode 100644 arch/powerpc/boot/libfdt/fdt_rw.c
create mode 100644 arch/powerpc/boot/libfdt/fdt_strerror.c
create mode 100644 arch/powerpc/boot/libfdt/fdt_sw.c
create mode 100644 arch/powerpc/boot/libfdt/fdt_wip.c
create mode 100644 arch/powerpc/boot/libfdt/libfdt.h
create mode 100644 arch/powerpc/boot/libfdt/libfdt_internal.h
create mode 100644 arch/powerpc/boot/libfdt_env.h
create mode 100644 arch/powerpc/boot/redboot-8xx.c
create mode 100644 arch/powerpc/boot/redboot.h
copy arch/powerpc/configs/{lite5200_defconfig => adder875-redboot_defconfig} (54%)
copy arch/powerpc/configs/{lite5200_defconfig => adder875-uboot_defconfig} (54%)
copy arch/powerpc/configs/{lite5200_defconfig => ep405_defconfig} (63%)
copy arch/powerpc/configs/{lite5200_defconfig => ep8248e_defconfig} (52%)
copy arch/powerpc/configs/{lite5200_defconfig => katmai_defconfig} (68%)
copy arch/powerpc/configs/{lite5200_defconfig => makalu_defconfig} (63%)
create mode 100644 arch/powerpc/configs/mpc5200_defconfig
create mode 100644 arch/powerpc/configs/mpc8315_rdb_defconfig
copy arch/powerpc/configs/{lite5200_defconfig => mpc837x_mds_defconfig} (61%)
copy arch/powerpc/configs/{lite5200_defconfig => mpc837x_rdb_defconfig} (60%)
copy arch/powerpc/configs/{lite5200_defconfig => mpc83xx_defconfig} (62%)
create mode 100644 arch/powerpc/configs/mpc85xx_defconfig
copy arch/powerpc/configs/{lite5200_defconfig => rainier_defconfig} (67%)
copy arch/powerpc/configs/{lite5200_defconfig => sbc834x_defconfig} (58%)
copy arch/powerpc/configs/{lite5200_defconfig => sbc8548_defconfig} (63%)
copy arch/powerpc/configs/{lite5200_defconfig => sbc8560_defconfig} (60%)
copy arch/powerpc/configs/{lite5200_defconfig => storcenter_defconfig} (51%)
rename arch/{ppc/configs/stx_gp3_defconfig => powerpc/configs/stx_gp3_defconfig} (54%)
rename arch/powerpc/configs/{lite5200_defconfig => taishan_defconfig} (68%)
rename arch/{ppc/configs/TQM8540_defconfig => powerpc/configs/tqm8540_defconfig} (66%)
copy arch/{ppc/configs/TQM8560_defconfig => powerpc/configs/tqm8541_defconfig} (66%)
copy arch/{ppc/configs/TQM8560_defconfig => powerpc/configs/tqm8555_defconfig} (66%)
rename arch/{ppc/configs/TQM8560_defconfig => powerpc/configs/tqm8560_defconfig} (66%)
create mode 100644 arch/powerpc/configs/warp_defconfig
rename arch/{ppc/kernel/rio.c => powerpc/kernel/rio.c} (100%)
create mode 100644 arch/powerpc/kernel/systbl_chk.c
create mode 100644 arch/powerpc/kernel/systbl_chk.sh
create mode 100644 arch/powerpc/mm/subpage-prot.c
create mode 100644 arch/powerpc/platforms/40x/ep405.c
create mode 100644 arch/powerpc/platforms/40x/makalu.c
create mode 100644 arch/powerpc/platforms/44x/katmai.c
create mode 100644 arch/powerpc/platforms/44x/rainier.c
create mode 100644 arch/powerpc/platforms/44x/taishan.c
create mode 100644 arch/powerpc/platforms/44x/warp-nand.c
create mode 100644 arch/powerpc/platforms/44x/warp.c
create mode 100644 arch/powerpc/platforms/52xx/mpc5200_simple.c
create mode 100644 arch/powerpc/platforms/82xx/ep8248e.c
rename arch/powerpc/platforms/83xx/{mpc8313_rdb.c => mpc831x_rdb.c} (58%)
create mode 100644 arch/powerpc/platforms/83xx/mpc837x_mds.c
create mode 100644 arch/powerpc/platforms/83xx/mpc837x_rdb.c
create mode 100644 arch/powerpc/platforms/83xx/sbc834x.c
create mode 100644 arch/powerpc/platforms/85xx/sbc8548.c
create mode 100644 arch/powerpc/platforms/85xx/sbc8560.c
create mode 100644 arch/powerpc/platforms/85xx/stx_gp3.c
create mode 100644 arch/powerpc/platforms/85xx/tqm85xx.c
create mode 100644 arch/powerpc/platforms/8xx/adder875.c
create mode 100644 arch/powerpc/platforms/8xx/mpc8xx.h
create mode 100644 arch/powerpc/platforms/cell/spu_fault.c
create mode 100644 arch/powerpc/platforms/embedded6xx/storcenter.c
delete mode 100644 arch/powerpc/platforms/iseries/vpdinfo.c
delete mode 100644 arch/powerpc/platforms/pasemi/electra_ide.c
create mode 100644 arch/powerpc/sysdev/Kconfig
delete mode 100644 arch/powerpc/sysdev/commproc.h
rename arch/powerpc/sysdev/{commproc.c => cpm1.c} (92%)
rename arch/powerpc/sysdev/{cpm2_common.c => cpm2.c} (95%)
rename arch/{ppc/syslib/ppc85xx_rio.c => powerpc/sysdev/fsl_rio.c} (100%)
rename arch/{ppc/syslib/ppc85xx_rio.h => powerpc/sysdev/fsl_rio.h} (100%)
create mode 100644 arch/powerpc/sysdev/mpic_pasemi_msi.c
create mode 100644 arch/powerpc/sysdev/of_rtc.c
create mode 100644 arch/powerpc/sysdev/ppc4xx_pci.c
create mode 100644 arch/powerpc/sysdev/ppc4xx_pci.h
delete mode 100644 arch/ppc/configs/TQM8541_defconfig
delete mode 100644 arch/ppc/configs/TQM8555_defconfig
delete mode 100644 arch/ppc/configs/mpc834x_sys_defconfig
delete mode 100644 arch/ppc/configs/mpc8540_ads_defconfig
delete mode 100644 arch/ppc/configs/mpc8548_cds_defconfig
delete mode 100644 arch/ppc/configs/mpc8555_cds_defconfig
delete mode 100644 arch/ppc/configs/mpc8560_ads_defconfig
delete mode 100644 arch/ppc/kernel/head_fsl_booke.S
delete mode 100644 arch/ppc/mm/fsl_booke_mmu.c
delete mode 100644 arch/ppc/platforms/83xx/Makefile
delete mode 100644 arch/ppc/platforms/83xx/mpc834x_sys.c
delete mode 100644 arch/ppc/platforms/83xx/mpc834x_sys.h
delete mode 100644 arch/ppc/platforms/85xx/Kconfig
delete mode 100644 arch/ppc/platforms/85xx/Makefile
delete mode 100644 arch/ppc/platforms/85xx/mpc8540_ads.c
delete mode 100644 arch/ppc/platforms/85xx/mpc8540_ads.h
delete mode 100644 arch/ppc/platforms/85xx/mpc8555_cds.h
delete mode 100644 arch/ppc/platforms/85xx/mpc8560_ads.c
delete mode 100644 arch/ppc/platforms/85xx/mpc8560_ads.h
delete mode 100644 arch/ppc/platforms/85xx/mpc85xx_ads_common.c
delete mode 100644 arch/ppc/platforms/85xx/mpc85xx_ads_common.h
delete mode 100644 arch/ppc/platforms/85xx/mpc85xx_cds_common.c
delete mode 100644 arch/ppc/platforms/85xx/mpc85xx_cds_common.h
delete mode 100644 arch/ppc/platforms/85xx/sbc8560.c
delete mode 100644 arch/ppc/platforms/85xx/sbc8560.h
delete mode 100644 arch/ppc/platforms/85xx/sbc85xx.c
delete mode 100644 arch/ppc/platforms/85xx/sbc85xx.h
delete mode 100644 arch/ppc/platforms/85xx/stx_gp3.c
delete mode 100644 arch/ppc/platforms/85xx/stx_gp3.h
delete mode 100644 arch/ppc/platforms/85xx/tqm85xx.c
delete mode 100644 arch/ppc/platforms/85xx/tqm85xx.h
delete mode 100644 arch/ppc/syslib/ipic.c
delete mode 100644 arch/ppc/syslib/ipic.h
delete mode 100644 arch/ppc/syslib/mpc83xx_devices.c
delete mode 100644 arch/ppc/syslib/mpc83xx_sys.c
delete mode 100644 arch/ppc/syslib/mpc85xx_devices.c
delete mode 100644 arch/ppc/syslib/mpc85xx_sys.c
delete mode 100644 arch/ppc/syslib/ppc83xx_pci.h
delete mode 100644 arch/ppc/syslib/ppc83xx_setup.c
delete mode 100644 arch/ppc/syslib/ppc83xx_setup.h
delete mode 100644 arch/ppc/syslib/ppc85xx_common.c
delete mode 100644 arch/ppc/syslib/ppc85xx_common.h
delete mode 100644 arch/ppc/syslib/ppc85xx_setup.c
delete mode 100644 arch/ppc/syslib/ppc85xx_setup.h
create mode 100644 drivers/ata/pata_of_platform.c
create mode 100644 drivers/ps3/ps3-lpm.c
create mode 100644 drivers/serial/ucc_uart.c
rename include/asm-powerpc/{commproc.h => cpm1.h} (89%)
create mode 100644 include/asm-powerpc/cputhreads.h
create mode 100644 include/asm-powerpc/dcr-regs.h
create mode 100644 include/asm-powerpc/setjmp.h
rename include/asm-ppc/{commproc.h => cpm1.h} (98%)
delete mode 100644 include/asm-ppc/immap_85xx.h
delete mode 100644 include/asm-ppc/mpc83xx.h
delete mode 100644 include/asm-ppc/mpc85xx.h
Aegis Lin (1):
[POWERPC] spufs: Use separate timer for /proc/spu_loadavg calculation
Andre Detsch (2):
[POWERPC] cell: safer of_has_vicinity routine
[POWERPC] spufs: DMA Restart after SIGSEGV
Anton Vorontsov (8):
libata: pata_platform: make probe and remove functions device type neutral
libata: pata_of_platform: OF-Platform PATA device driver
[POWERPC] booting-without-of: localbus should not include board name
[POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
[POWERPC] QE: get rid of most device_types and model
ucc_geth: get rid of device_type for mdio
spi_mpc83xx: use brg-frequency for SPI in QE
[POWERPC] fsl_spi: stop using device_type = "spi"
Arnd Bergmann (1):
[POWERPC] spufs: block fault handlers in spu_acquire_runnable
Balbir Singh (1):
[POWERPC] Fake NUMA emulation for PowerPC
Becky Bruce (1):
[POWERPC] Fixup use of phys_addr_t in mpic code
Benjamin Herrenschmidt (51):
[POWERPC] Cleanup SMT thread handling
[POWERPC] Add xmon function to dump 44x TLB
[POWERPC] Make isa_mem_base common to 32 and 64 bits
[POWERPC] Merge pci_process_bridge_OF_ranges()
[POWERPC] Fix powerpc 32-bit resource fixup for 64-bit resources
[POWERPC] Change 32-bit PCI message about resource allocation
[POWERPC] Remove useless volatiles in udbg_16550.c
[POWERPC] Add of_translate_dma_address
[POWERPC] Early debug forces console log level to max
[POWERPC] pci32: Remove bogus alignment message
[POWERPC] pci32: Use generic pci_assign_unassign_resources
[POWERPC] pci32: Remove PowerMac P2P bridge IO hack
[POWERPC] pci32: Add flags modifying the PCI code behaviour
[POWERPC] pci32: Remove obsolete PowerMac bus number hack
[POWERPC] pci32: Add platform option to enable /proc PCI domains
[POWERPC] Merge pcibios_resource_to_bus/bus_to_resource
[POWERPC] Merge PCI resource fixups
[POWERPC] Merge PCI resource allocation & assignment
[POWERPC] fix iSeries PCI resource management
[POWERPC] Updates/fixes to 32 bits pcibios_enable_device()
[POWERPC] Merge 32 and 64 bits pcibios_enable_device
[POWERPC] Fixup powermac enable device hook
[POWERPC] Clear pci_probe_only on 64 bits PowerMac
[POWERPC] Various fixes to pcibios_enable_device()
[POWERPC] Enable self-view of the HT host bridge on PowerMac G5
[POWERPC] Improve resource setup of PowerMac G5 HT bridge
[POWERPC] Fixup skipping of PowerMac PCI<->PCI bridge "closed" resources
[POWERPC] Disable PCI IO/Mem on a device when resources can't be allocated
[POWERPC] Fix PCI IRQ fallback code to not map IRQ 0
[POWERPC] Fix for via-pmu based backlight control
[POWERPC] Fix possible NULL deref in ppc32 PCI
[POWERPC] Reworking machine check handling and Fix 440/440A
[POWERPC] 4xx: Improve support for 4xx indirect DCRs
[POWERPC] 4xx: PLB to PCI-X support
[POWERPC] 4xx: PLB to PCI 2.x support
[POWERPC] 4xx: PLB to PCI Express support
[POWERPC] 4xx: PCI support for Ebony board
[POWERPC] 4xx: Add early udbg support for 40x processors
[POWERPC] 4xx: EP405 boards support for arch/powerpc
[POWERPC] 4xx: Add PCI to Walnut platform
[POWERPC] 4xx: Wire up PCI on Bamboo board
[POWERPC] 4xx: Wire up 440EP USB controller support to Bamboo board
[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library
[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper
[POWERPC] 4xx: Add CPR0 accessors to boot wrapper
[POWERPC] 4xx: Rework clock probing in boot wrapper
[POWERPC] 4xx: Base support for 440SPe "Katmai" eval board
[POWERPC] 4xx: remove bogus "ranges" property in Bamboo EBC node
[POWERPC] 4xx: PCI-E Link setup improvements
[POWERPC] pci32: 4xx embedded platforms want to reassign all PCI resources
[POWERPC] Always hookup PHB IO resource even when empty
Bob Nelson (1):
[POWERPC] OProfile: fix cbe pm signal routing problem
Christoph Hellwig (2):
[POWERPC] spufs: add enchanced simple attr macros
[POWERPC] spufs: make state_mutex interruptible
Cyrill Gorcunov (5):
[POWERPC] CELLEB: Fix possible NULL pointer dereference
[POWERPC] CHRP: Fix possible NULL pointer dereference
[POWERPC] Use for_each macros in arch/powerpc/sysdev
[POWERPC] Use for_each macros in arch/powerpc/kernel
[POWERPC] Use for_each macros in arch/powerpc/platforms/powermac
Dale Farnsworth (1):
[POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500
David Gibson (6):
[POWERPC] Merge libfdt upstream source
[POWERPC] Use embedded libfdt in the bootwrapper
[POWERPC] Kill flatdevtree.c
[POWERPC] Merge dtc upstream source
[POWERPC] Use embedded dtc in kernel builds
[POWERPC] Enable RTC for Ebony and Walnut (v2)
David Woodhouse (4):
[POWERPC] Create otheros.bld next to specified output file, not in $object directory
[POWERPC] Find device-tree source file in default directory
[POWERPC] Allow for bootwrapper utilities being in different directory to objects
[POWERPC] Implement 'make bootwrapper_install'
Emil Medve (1):
[POWERPC] Optimize counting distinct entries in the relocation sections
Geert Uytterhoeven (10):
[POWERPC] Kill sparse warning in HPTE_V_COMPARE()
[POWERPC] PS3: Make bus_id and dev_id u64
[POWERPC] PS3: Add ps3_repository_find_device_by_id()
[POWERPC] PS3: Use the HVs storage device notification mechanism properly
[POWERPC] PS3: Add repository polling loop to work around timing bug
[POWERPC] PS3: Kill unused ps3_repository_bump_device()
[POWERPC] PS3: Refactor ps3_repository_find_device()
[POWERPC] PS3: Checkpatch cleanups for drivers/ps3/ps3-sys-manager.c
[POWERPC] PS3: Checkpatch cleanups for drivers/ps3/ps3-vuart.c
[POWERPC] PS3: Checkpatch cleanups for arch/powerpc/platforms/ps3/repository.c
Geoff Levand (5):
[POWERPC] Add definition of Cell bookmark SPR
[POWERPC] PS3: Add logical performance monitor device support
[POWERPC] PS3: Vuart: change semaphore to mutex
[POWERPC] PS3: Remove lpar address workaround
[POWERPC] PS3: Update ps3_defconfig
Grant Likely (16):
[POWERPC] Add machine initcall macros
[POWERPC] 4xx: typo in calling machine_device_initcall() for Sequoia board
[POWERPC] pasemi: Use machine_*_initcall() hooks in platform code
[POWERPC] Add of_find_matching_node() helper function
[POWERPC] powermac: Use machine_*_initcall() hooks in platform code
[POWERPC] cell: Use machine_*_initcall() hooks in platform code
[POWERPC] mpc5200: eliminate mpc52xx_*_map_*() functions.
[POWERPC] mpc5200: merge defconfigs for all mpc5200 boards
[POWERPC] 8xx: Use machine_*_initcall() hooks in platform code
[POWERPC] mpc52xx: clean up Kconfig
[POWERPC] mpc5200: normalize compatible property bindings
[POWERPC] mpc5200: make dts files conform to generic names recommended practice
[POWERPC] Efika: prune fixups and make them more carefull
[POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()
[POWERPC] mpc52xx_psc_spi device driver must not touch port_config and cdm
[POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform code
Hollis Blanchard (1):
[POWERPC] 4xx: enable built-in networking for Sequoia defconfig
Hugh Blemings (1):
[POWERPC] 4xx: Base support for 440GX Taishan eval board
Ishizaki Kou (6):
[POWERPC] cell: Fix undefined reference to mmio_nvram_init
[POWERPC] celleb: Add support for native CBE
[POWERPC] Update celleb_defconfig to add support for native CBE
[POWERPC] cell: add missing '\n'
[POWERPC] Cleanup calling mmio_nvram_init
[POWERPC] celleb: Split machine definition
Jeremy Kerr (11):
[POWERPC] cell: export force_sig_info()
[POWERPC] cell: handle kernel SLB setup in spu_base.c
[POWERPC] cell: use spu_load_slb for SLB setup
[POWERPC] cell: add spu_64k_pages_available() check
[POWERPC] cell: handle SPE kernel mappings that cross segment boundaries
[POWERPC] cell: catch errors from sysfs_create_group()
[POWERPC] spufs: move fault, lscsa_alloc and switch code to spufs module
[POWERPC] spufs: fix incorrect interrupt status clearing in backing mbox stat poll
[POWERPC] spufs: use #defines for SPU class [012] exception status
[POWERPC] spufs: rework class 0 and 1 interrupt handling
[POWERPC] spufs: Don't leak kernel stack through an empty {i,m}box_info read
Jochen Friedrich (11):
[POWERPC] Add support for PORTA and PORTB odr registers
[POWERPC] Move CPM command handling into the cpm drivers
[POWERPC] Update .gitignore files
fs_enet: Add fixed-phy support for fs_enet
[POWERPC] 8xx: Remove unused m8xx_cpm_hostalloc/free/dump()
[POWERPC] 8xx: Rename m8xx_pic_init to mpc8xx_pics_init
[POWERPC] 8xx: Remove unneeded and misspelled prototype m8xx_calibrate_decr
[POWERPC] 8xx: Remove sysdev/commproc.h
[POWERPC] 8xx: Get rid of conditional includes of board specific setup
[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c
[POWERPC] CPM: Move definition of buffer descriptor to cpm.h
Johannes Berg (6):
[POWERPC] powermac: Fix warning in time.c
[POWERPC] PMU: Don't lock_kernel()
[POWERPC] PMU: Remove dead code
[POWERPC] adb: Replace sleep notifier with platform driver suspend/resume hooks
[POWERPC] via-pmu: Kill sleep notifiers completely
[POWERPC] powermac: Use generic suspend code
John Rigby (4):
[POWERPC] Separate MPC52xx PSC FIFO registers from rest of PSC
[POWERPC] mpc5200: Cleanup checkpatch.pl problems in mpc52xx_uart.c
[POWERPC] Add support for mpc512x interrupts to ipic
[POWERPC] Add IPIC Kconfig option
Jon Loeliger (12):
[POWERPC] Clean out asm/of_{platform, device}.h
[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/
[POWERPC] 8xxx: Convert #include of asm/of_{platform, device}.h into linux/of_{platform, device}.h.
[POWERPC] 86xx: Add aliases node to 8641hpcn DTS file.
[POWERPC] cell: Convert #include of asm/of_{platform, device}.h into linux/of_{platform, device}.h.
[POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.
[POWERPC] Add _nmask_and_or_msr() declartion to asm-powerpc/system.h
[POWERPC] Add StorCenter DTS first draft.
[POWERPC] Add initial iomega StorCenter board port.
[POWERPC] Add initial storcenter config file.
[POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
[POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
Jon Tollefson (1):
[POWERPC] Add hugepagesz boot-time parameter
Joseph Fannin (1):
[POWERPC] Export copy_page() on 32bit
Josh Boyer (11):
[POWERPC] 4xx: Fix 440grx setup function to call 440A fixup
[POWERPC] 4xx: Include missing header
[POWERPC] 4xx: libfdt and pci fixes for Rainier
[POWERPC] 4xx: Rename CPU nodes to avoid dtc incompatibility
[POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigs
[POWERPC] 4xx: Mark of_bus structures as __initdata
[POWERPC] Conditionally compile e200 and e500 platforms in cputable
[POWERPC] Remove unneeded variable declarations from mpc837x_mds
[POWERPC] 4xx: Use machine_device_initcall for bus probe
[POWERPC] 4xx: Minor coding style cleanups for 4xx bootwrapper
[POWERPC] 4xx: Update defconfigs
Julia Lawall (3):
[POWERPC] arch/ppc: Remove an unnecessary pci_dev_put
[POWERPC] arch/powerpc: Add missing of_node_put
[POWERPC] cell/cbe_regs.c: Add missing of_node_put
Julio M. Merino Vidal (1):
[POWERPC] spufs: fix typos in sched.c comments
Kevin Corry (1):
[POWERPC] perfmon2: make pm_interval register read/write
Kim Phillips (10):
[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platform
[POWERPC] 83xx: add base platform support for the mpc8315 rdb board
[POWERPC] 83xx: Add the MPC8315E RDB dts
[POWERPC] 83xx: enable FSL SATA driver config for Freescale SoCs
[POWERPC] 83xx: ipic: add interrupt vector 94
[POWERPC] 83xx: add the mpc8315 rdb defconfig
[POWERPC] 83xx: add MPC837x RDB platform support
[POWERPC] 83xx: add the mpc837[789]_rdb dts files
[POWERPC] 83xx: add the mpc837x rdb defconfig
[POWERPC] 83xx: Fix typo in mpc837x compatible entries
Kumar Gala (31):
[POWERPC] Add SPRN for Embedded registers specified in PowerISA 2.04
[POWERPC] Emulate isel (Integer Select) instruction
[POWERPC] FSL: I2C device tree cleanups
[POWERPC] FSL: enet device tree cleanups
[POWERPC] FSL: Added aliases node to device trees
[POWERPC] Fix handling of memreserve if the range lands in highmem
[POWERPC] Ensure we only handle PowerMac PCI bus fixup for memory resources
[POWERPC] Fixup transparent P2P resources
[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx
[POWERPC] Remove update_bridge_resource
[POWERPC] 85xx: convert boards to use machine_device_initcall
[POWERPC] 83xx: convert boards to use machine_device_initcall
[POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias
[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias
[POWERPC] Fix incorrect interrupt map on FSL reference boards
[RAPIDIO] Fix compile error and warning
[POWERPC] Move RapidIO support code from arch/ppc
[POWERPC] Fix compile error if CONFIG_STX_GP3 is defined
[POWERPC] Always build setup-bus.c on powerpc
[POWERPC] bootwrapper: Add find_node_by_compatible
[POWERPC] Add a cuboot wrapper for 85xx with CPM2
[POWERPC] 85xx: Port STX GP3 board over from arch/ppc
[POWERPC] 85xx: Port TQM85xx boards over from arch/ppc
[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx
[PPC] Remove 83xx from arch/ppc
[PPC] Remove 85xx from arch/ppc
[POWERPC] 86xx: Remove unused IRQ defines
[POWERPC] 85xx: rework platform Kconfig
[POWERPC] 83xx: rework platform Kconfig
[POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
[POWERPC] 85xx: Only invalidate TLB0 and TLB1
Li Yang (9):
[POWERPC] add e300c4 entry to cputable
[POWERPC] ipic: add new interrupts introduced by new chip
[POWERPC] 83xx: Add platform support for MPC837x MDS board
[POWERPC] 83xx: Add MPC837x MDS default kernel configuration
[POWERPC] ipic: ack only for edge interrupts
[POWERPC] 83xx: add device trees for MPC837x MDS board
[POWERPC] 83xx: Add MPC837x USB platform support
[POWERPC] 83xx: USB device tree cleanups
[POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodes
Li Zefan (1):
[POWERPC] Don't cast a struct pointer to list_head pointer
Linas Vepstas (3):
[POWERPC] EEH: Work with device endpoint, always
[POWERPC] EEH: Be careful when identifying "empty" slots.
[POWERPC] EEH: Report errors as soon as possible
Liu Yu (1):
[POWERPC] Fix carry bug in 128-bit unsigned integer adding
Lucas Woods (2):
[POWERPC] arch/powerpc: Remove duplicate includes
[POWERPC] arch/ppc: Remove duplicate includes
Luke Browning (4):
[POWERPC] spufs: add backing ops for privcntl register
[POWERPC] spufs: reorganize spu_run_init
[POWERPC] spufs: spu_find_victim may choose wrong victim
[POWERPC] spufs: decouple spu scheduler from spufs_spu_run (asynchronous scheduling)
Marian Balakowicz (6):
[POWERPC] mpc5200: Add 'fsl,lpb' bus type for localplus bus
[POWERPC] mpc5200: Add common mpc52xx_setup_pci() routine
[POWERPC] mpc5200: Add TQM5200 DTS
[POWERPC] mpc5200: add CM5200 DTS
[POWERPC] mpc5200: Add Promess Motion-PRO DTS
[POWERPC] mpc5200: Add generic support for simple MPC5200 based boards
Mark A. Greer (1):
[POWERPC] #address-cells & #size-cells properties are not inherited
Masato Noguchi (2):
[POWERPC] cell: wrap master run control bit
[POWERPC] spufs: don't set reserved bits in spu interrupt status
Matthias Fuchs (1):
[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper
Michael Ellerman (18):
[POWERPC] Add for_each_child_of_node() helper for iterating over child nodes
[POWERPC] Implement pci_set_dma_mask() in terms of the dma_ops
[POWERPC] Set archdata.dma_data for direct DMA in cell_dma_dev_setup()
[POWERPC] Add celleb_dma_dev_setup()
[POWERPC] Use archdata.dma_data in dma_direct_ops and add the offset
[POWERPC] Have cell use its own dma_direct_offset variable
[POWERPC] Have celleb use its own dma_direct_offset variable
[POWERPC] Remove the global dma_direct_offset
[POWERPC] Remove bogus comment in dma_direct_alloc_coherent()
[POWERPC] Make IOMMU code safe for > 132 GB of memory
[POWERPC] Add set_dma_ops() to match get_dma_ops()
[POWERPC] Allocate the hash table under 1G on cell
[POWERPC] Split out the logic that allocates struct iommus
[POWERPC] Split cell_iommu_setup_hardware() into two parts
[POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
[POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
[POWERPC] Split out the ioid fetching/checking logic
[POWERPC] Cell IOMMU fixed mapping support
Michael Hanselmann (1):
[POWERPC] Update smu command definitions
Michael Neuling (3):
[POWERPC] Use SLB size from the device tree
[POWERPC] Make setjmp/longjmp code usable outside of xmon
[POWERPC] kdump shutdown hook support
Milton Miller (6):
[POWERPC] Push down or eliminate smp_processor_id calls in xics code
[POWERPC] init_decrementer_clockevent can be static __init
[POWERPC] Use __get_cpu_var in time.c
[POWERPC] Timer interrupt: use a struct for two per_cpu varables
[POWERPC] Depend on ->initialized in calc_steal_time
[POWERPC] Optimize account_system_vtime
Nathan Lynch (2):
[POWERPC] Remove prod_processor()
[POWERPC] lparcfg: Remove useless buffer allocation
Olaf Hering (2):
[POWERPC] Revert chrp_pci_fixup_vt8231_ata devinit to fix libata on pegasos
[POWERPC] Autodetect serial console on pegasos2
Olof Johansson (15):
[POWERPC] pasemi: clean up mdio_gpio a bit
[POWERPC] pasemi: Broaden specific references to 1682M
[POWERPC] pasemi: Don't enter powersaving states from elevated astates
[POWERPC] pasemi: Move cpus to hold loop before restart
[POWERPC] pasemi: Fix module information for gpio-mdio
[POWERPC] MPIC: Minor optimization of ipi handler
[POWERPC] pasemi: Implement MSI support
[POWERPC] holly.c: Remove unnecessary include of linux/ide.h
[POWERPC] pasemi: Implement NMI support
[POWERPC] pasemi: Distribute interrupts evenly across cpus
[POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfig
[POWERPC] pasemi: Fix NMI handling check
[POWERPC] pasemi: Move electra-ide to pata_of_platform
[POWERPC] Make smp_call_function_map static
[POWERPC] Make smp_send_stop() handle panic and xmon reboot
Paul Gortmaker (16):
[POWERPC] 85xx: mpc85xx_ads: add in missing of_node_put()
[POWERPC] mpc5200: add #address-cells and #size-cells to soc node.
[POWERPC] Reduce code duplication in legacy_serial, add UART parent types
[POWERPC] 85xx: Add support for Wind River SBC8560 in arch/powerpc
[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 board
[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boards
[POWERPC] 85xx: Add default .config file for Wind River SBC8560
[POWERPC] 85xx: Add basic support for Wind River SBC8548 board
[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8548 board
[POWERPC] 85xx: Add default .config file for Wind River SBC8548
[POWERPC] 83xx: Add support for Wind River SBC834x boards
[POWERPC] 83xx: Add device tree source for Wind River SBC834x board.
[POWERPC] 83xx: Add default config file for Wind River SBC8349 board
[POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1
[POWERPC] QE: Explicitly set address-cells and size cells for muram
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
Paul Mackerras (8):
[POWERPC] Convert media-bay.c to use the kthread API
[POWERPC] Convert adb.c to use kthread API and not spin on ADB requests
[POWERPC] Convert therm_pm72.c to use the kthread API
[POWERPC] Convert therm_windtunnel.c to use the kthread API
[POWERPC] Fix sleep on powerbook 3400
Revert "[POWERPC] Disable PCI IO/Mem on a device when resources can't be allocated"
[POWERPC] Provide a way to protect 4k subpages when using 64k pages
Revert "[POWERPC] Fake NUMA emulation for PowerPC"
Roel Kluin (1):
[POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.c
Scott Wood (13):
[POWERPC] 8xx: Convert mpc866ads to the new device binding.
[POWERPC] 83xx: mpc834x_mds: Fix whitespace and call of_platform_bus_probe().
[POWERPC] 83xx: mpc8313erdb: Fix whitespace.
[POWERPC] wrapper: Rename offset in offset_devp()
[POWERPC] wrapper: Treat NULL as root node in devp_offset; add devp_offset_find()
[POWERPC] Implement arch disable/enable irq hooks.
[POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.
[POWERPC] 8xx: Analogue & Micro Adder875 board support.
[POWERPC] 82xx: Embedded Planet EP8248E support
[POWERPC] 83xx: MPC8313e RBD add NAND to device tree
[POWERPC] 83xx: MPC8313e RDB - Add NOR flash to the device tree.
[POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.
[POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdata
Sean MacLennan (5):
[POWERPC] 4xx: Add PowerPC 440EP Rev C
[POWERPC] 4xx: PIKA Warp base platform
[POWERPC] 4xx: PIKA Warp DTS
[POWERPC] 4xx: PIKA Warp bootwrapper
[POWERPC] 4xx: PIKA Warp defconfig
Stefan Roese (15):
[POWERPC] 4xx: Add 440SPe revA runtime detection to PCIe
[POWERPC] 4xx: Fix TLB 0 problem with CONFIG_SERIAL_TEXT_DEBUG
[POWERPC] 4xx: Add 405EX CPU type needed for EMAC support on Kilauea
[POWERPC] 4xx: Change Kilauea dts to support new EMAC device tree properties
[POWERPC] 4xx: Add Kilauea PCIe support to dts and Kconfig
[POWERPC] 4xx: Set ibpre for 405EX in 4xx PCIe driver
[POWERPC] 4xx: Add aliases node to 4xx dts files
[POWERPC] 4xx: Change Kilauea PCIe bus ranges in dts file
[POWERPC] 4xx: Add AMCC Makalu board support to platforms/40x
[POWERPC] 4xx: Makalu dts
[POWERPC] 4xx: Makalu defconfig
[POWERPC] 4xx: Add EMAC support to Kilauea defconfig
[POWERPC] 4xx: PCIe: Increase max busses per port to 64
[POWERPC] 4xx: Add 405EXr to cputable
[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dts
Stephen Neuendorffer (6):
[POWERPC] Improved documentation of device tree 'ranges'
[POWERPC] Xilinx: update compatible list for interrupt controller
[POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.
[POWERPC] Xilinx: Update booting-without-of.
[POWERPC] Xilinx: updated device tree compatibility to match uboot bsp generator.
[POWERPC] Xilinx uartlite: Section type fixups
Stephen Rothwell (51):
[POWERPC] Make global_phb_number static
[POWERPC] iSeries: Mark two functions __init
[POWERPC] iSeries: Declare iSeries_pci_final_fixup in pci.h
[POWERPC] iSeries: Fix sparse warnings in setup.c
[POWERPC] Remove redundant declaration of hose_list
[POWERPC] Use of_register_driver to implement of_register_platform_driver
[POWERPC] kernel_execve is identical in 32 and 64 bit
[POWERPC] iommu_free_table doesn't need the device_node
[POWERPC] pSeries: Remove dependency on pci_dn bussubno
[POWERPC] Clean up pci-bridge.h
[POWERPC] Consolidate pci_controller
[POWERPC] iSeries: Move find_Device_Node to avoid a forward declaration
[POWERPC] iSeries: Cleanup PCI retry code a little
[POWERPC] iSeries: DeCamelCase pci.c
[POWERPC] iSeries: Remove some dead code from pci.c
[POWERPC] iSeries: Unindent and clean iSeries_pci_final_fixup
[POWERPC] iSeries: Consoldiate PCI IO error check
[POWERPC] iSeries: Remove one layer of IO routines
[POWERPC] iSeries: Remove pci_dn dependency from iSeries_Device_Information
[POWERPC] iSeries: iseries_ds_addr is only used in pci.c
[POWERPC] iSeries: Reduce dependence on pci_dn bussubno
[POWERPC] iSeries: Make pcibios_final_fixup not depend on pci_dn
[POWERPC] Inline pci_setup_pci_controller as it has become trivial
[POWERPC] iSeries: Call iSeries_pcibios_init from setup_arch
[POWERPC] iSeries: hose->buid is always zero for iSeries
[POWERPC] Remove some iSeries platform checks from the PCI code
[POWERPC] Don't special case pci_domain_nr() for iSeries
[POWERPC] pci_controller->arch_data really is a struct device_node *
[POWERPC] iSeries: DeCamelCase vpdinfo.c
[POWERPC] iSeries: Clean up and simplify vdpinfo.c
[POWERPC] iSeries: Merge vpdinfo.c into pci.c
[POWERPC] EEH: Avoid a possible NULL pointer dereference
[POWERPC] iSeries: Fix unregistering HV event handlers
[POWERPC] Stop the TOC overflowing for large builds
[POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfig
[POWERPC] The builtin matches for ibmebus.c can be __initdata
[POWERPC] Constify the of_device_id passed to of_platform_bus_probe
[POWERPC] Pointers marked as __iomem do not need to be volatile
[POWERPC] Make non-PCI build work again
[POWERPC] The pci_dn class_code is only used by EEH
[POWERPC] The pci_dn pcidev is only used by EEH
[POWERPC] iSeries: eliminate pci_dn bussubno
[POWERPC] eeh.c: Use for_each_child_of_node
[POWERPC] pci_32.c: Use for_each_child_of_node
[POWERPC] therm_pm72: Suppress some compile warnings
[POWERPC] arch/powerpc/kernel: Use for_each_child_of_node
[POWERPC] therm_windtunnel: Eliminate some build warnings
[POWERPC] therm_adt746x: Eliminate some build warnings
[POWERPC] Check that the syscall table matches the syscall numbers
[POWERPC] Make ibmebus use of_(un)register_driver
[POWERPC] Fix a couple of copyright symbols
Takashi Yamamoto (2):
[POWERPC] PS3: Add logical performance monitor repository routines
[POWERPC] PS3: Add logical performance monitor driver support
Timur Tabi (8):
[POWERPC] 86xx: fix guts_set_dmacr() and add guts_set_pmuxcr_dma() to immap_86xx.h
[POWERPC] QE: change qe_setbrg() to take an enum qe_clock instead of an integer
[POWERPC] qe: add function qe_clock_source()
[POWERPC] ucc_geth: use rx-clock-name and tx-clock-name device tree properties
[POWERPC] QE: Add ability to upload QE firmware
[POWERPC] QE: Add support for Freescale QUICCEngine UART
[POWERPC] qe-uart: add support for Freescale QUICCEngine UART
[POWERPC] Update MPC8610 HPCD to support audio drivers
Valentine Barshak (12):
[POWERPC] 4xx: 440EPx Sequoia USB OHCI DTS entry
[POWERPC] 4xx: 440GRx Rainier bootwrapper.
[POWERPC] 4xx: 440GRx Rainier DTS.
[POWERPC] 4xx: 440GRx Rainier board support.
[POWERPC] 4xx: 440GRx Rainier default config
[POWERPC] 4xx: make UIC use generic level irq handler
[POWERPC] 4xx: rework UIC cascade irq handling
[POWERPC] 4xx: Correct 440GRx machine_check callback
[POWERPC] 4xx: Add PCI entry to 440EPx Sequoia DTS.
[POWERPC] 44x: Sequoia and Rainier updates for 2.6.25
[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround
[POWERPC] 4xx: Add PCI entry to 440GRx Rainier DTS.
Vitaly Bordug (3):
phy/fixed.c: rework to not duplicate PHY layer functionality
[POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus
[POWERPC] fsl_soc: add support to gianfar for fixed-link property
Wade Farnsworth (2):
[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts
[POWERPC] 86xx: MPC8641 HPCN - call of_platform_bus_probe()
Zhang Wei (1):
[POWERPC] Add docs for Freescale DMA & DMA channel device tree nodes
joe@perches.com (6):
[POWERPC] Add missing spaces in printk formats
[POWERPC] Add missing spaces in printk formats in arch/ppc
[POWERPC] arch/powerpc/: Spelling fixes
[POWERPC] include/asm-powerpc/: Spelling fixes
[POWERPC] arch/ppc/: Spelling fixes
[POWERPC] include/asm-ppc/: Spelling fixes
will schmidt (1):
[POWERPC] Update xmon slb code
^ permalink raw reply
* compilation errors...sorry, sigh...
From: Lorenzo T. Flores @ 2008-01-31 1:01 UTC (permalink / raw)
To: linuxppc-embedded
Hey all,
I was wondering if anyone could help me figure out what to do next as
far as some compilation errors are concerned.
I'm working with an Avnet 4vfx12ls eval board (has virtex-4 and PPC).
Now, I've generated BSP files using Xilinx XPS, and from past posts on
this forum found the Secret Lab's virtex 2.6 git tree (not sure if I'm
using proper terminology, feel free to correct me, please!)
Well, I copied in the BSP files into the distribution. Ran 'make
menuconfig' then 'make bzImage'
Here's the errors I get:
---------------------------------------------------------------------
GEN .version
CHK include/linux/compile.h
dnsdomainname: Unknown host
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
kernel/built-in.o: In function `enable_all_kprobes':
kernel/kprobes.c:926: undefined reference to `arch_arm_kprobe'
kernel/built-in.o: In function `disable_all_kprobes':
kernel/kprobes.c:957: undefined reference to `arch_disarm_kprobe'
kernel/kprobes.c:956: undefined reference to `arch_trampoline_kprobe'
kernel/built-in.o: In function `init_kprobes':
kernel/kprobes.c:823: undefined reference to `arch_init_kprobes'
kernel/built-in.o: In function `report_probe':
kernel/kprobes.c:838: undefined reference to `setjmp_pre_handler'
kernel/kprobes.c:838: undefined reference to `setjmp_pre_handler'
kernel/built-in.o: In function `unregister_kprobe':
kernel/kprobes.c:610: undefined reference to `arch_disarm_kprobe'
kernel/kprobes.c:632: undefined reference to `arch_remove_kprobe'
kernel/built-in.o: In function `pre_handler_kretprobe':
kernel/kprobes.c:702: undefined reference to `arch_prepare_kretprobe'
kernel/built-in.o: In function `in_kprobes_functions':
kernel/kprobes.c:495: undefined reference to `__kprobes_text_start'
kernel/kprobes.c:495: undefined reference to `__kprobes_text_start'
kernel/kprobes.c:495: undefined reference to `__kprobes_text_end'
kernel/kprobes.c:495: undefined reference to `__kprobes_text_end'
kernel/built-in.o: In function `__register_kprobe':
kernel/kprobes.c:556: undefined reference to `arch_prepare_kprobe'
kernel/kprobes.c:565: undefined reference to `arch_arm_kprobe'
kernel/built-in.o: In function `register_jprobe':
kernel/kprobes.c:669: undefined reference to `setjmp_pre_handler'
kernel/kprobes.c:669: undefined reference to `setjmp_pre_handler'
kernel/kprobes.c:670: undefined reference to `longjmp_break_handler'
kernel/kprobes.c:670: undefined reference to `longjmp_break_handler'
kernel/built-in.o:(__ksymtab_gpl+0x398): undefined reference to
`jprobe_return'
kernel/built-in.o:(.data+0x4a84): undefined reference to
`kprobe_exceptions_notify'
make: *** [.tmp_vmlinux1] Error 1
---------------------------------------------------------------------
I'm using ELDK's ppc_4xx toolchain.
Any info or links to relevant posts would be so much appreciated. I
looked through the archives and know my answers are probably in there
somewhere...I'm just not sure if I could distill the proper information.
Thank you all for any input!
best,
Lorenzo Flores
--
Embedded Systems Engineer
Alpha Golf
(510) 526-7443, ext. 07
65 Franciscan Way
Kensington, CA 94707
^ permalink raw reply
* RE: [RFC] [POWERPC] bootwrapper: build multiple cuImages
From: Stephen Neuendorffer @ 2008-01-31 1:49 UTC (permalink / raw)
To: Grant Likely, jwboyer, linuxppc-dev, scottwood, galak
In-Reply-To: <20080131003347.5779.96112.stgit@trillian.secretlab.ca>
I like the spirit... It does seem like the compiled in device tree is
specified in the wrong place.
Comments inline.
> -----Original Message-----
> From: =
linuxppc-dev-bounces+stephen.neuendorffer=3Dxilinx.com@ozlabs.org
[mailto:linuxppc-dev-
> bounces+stephen.neuendorffer=3Dxilinx.com@ozlabs.org] On Behalf Of =
Grant
Likely
> Sent: Wednesday, January 30, 2008 4:34 PM
> To: jwboyer@gmail.com; linuxppc-dev@ozlabs.org;
scottwood@freescale.com; galak@kernel.crashing.org
> Subject: [RFC] [POWERPC] bootwrapper: build multiple cuImages
>=20
> From: Grant Likely <grant.likely@secretlab.ca>
>=20
> Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image
> with a fdt blob which means for any given configuration only one dts
> file can be selected and so support for only one board can be built
>=20
> This patch moves the selection of the default .dts file out of the
kernel
> config and into the bootwrapper makefile. The makefile chooses which
> images to build based on the kernel config and the dts source file
> name is taken directly from the image name. For example
"cuImage.ebony"
> will use "ebony.dts" as the device tree source file.
>=20
> In addition, this patch allows a specific image to be requested from
the
> command line by adding "cuImage.%" and "treeImage.%" targets to the
list
> of valid built targets in arch/powerpc/Makefile. This allows the
default
> dts selection to be overridden.
>=20
> Another advantage to this change is it allows a single defconfig to be
> supplied for all boards using the same chip family and only differing
in
> the device tree.
>=20
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
>=20
> ---
>=20
> Please review and comment. I have not exhaustively tested this patch
> and I'm sure to have missed some boards. However, I think the concept
> is sound and will be a good change.
> ---
>=20
> arch/powerpc/Kconfig | 19 -------
> arch/powerpc/Makefile | 9 +--
> arch/powerpc/boot/Makefile | 123
++++++++++++++++++++++++++++++++------------
> arch/powerpc/boot/wrapper | 20 +++++++
> 4 files changed, 112 insertions(+), 59 deletions(-)
>=20
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 5e10838..5c205c7 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -407,25 +407,6 @@ config WANT_DEVICE_TREE
> bool
> default n
>=20
> -config DEVICE_TREE
> - string "Static device tree source file"
> - depends on WANT_DEVICE_TREE
> - help
> - This specifies the device tree source (.dts) file to be
> - compiled and included when building the bootwrapper. If a
> - relative filename is given, then it will be relative to
> - arch/powerpc/boot/dts. If you are not using the bootwrapper,
> - or do not need to build a dts into the bootwrapper, this
> - field is ignored.
> -
> - For example, this is required when building a cuImage target
> - for an older U-Boot, which cannot pass a device tree itself.
> - Such a kernel will not work with a newer U-Boot that tries to
> - pass a device tree (unless you tell it not to). If your
U-Boot
> - does not mention a device tree in "help bootm", then use the
> - cuImage target and specify a device tree here. Otherwise, use
> - the uImage target and leave this field blank.
> -
> endmenu
>=20
> config ISA_DMA_API
> diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
> index f70df9b..6845482 100644
> --- a/arch/powerpc/Makefile
> +++ b/arch/powerpc/Makefile
> @@ -151,14 +151,11 @@ core-$(CONFIG_XMON) +=3D
arch/powerpc/xmon/
> drivers-$(CONFIG_OPROFILE) +=3D arch/powerpc/oprofile/
>=20
> # Default to zImage, override when needed
> -defaultimage-y :=3D zImage
> -defaultimage-$(CONFIG_DEFAULT_UIMAGE) :=3D uImage
> -KBUILD_IMAGE :=3D $(defaultimage-y)
> -all: $(KBUILD_IMAGE)
> +all: zImage
>=20
> CPPFLAGS_vmlinux.lds :=3D -Upowerpc
>=20
> -BOOT_TARGETS =3D zImage zImage.initrd uImage
> +BOOT_TARGETS =3D zImage zImage.initrd uImage treeImage.% cuImage.%
>=20
> PHONY +=3D $(BOOT_TARGETS)
>=20
> @@ -180,7 +177,7 @@ define archhelp
> endef
>=20
> install: vdso_install
> - $(Q)$(MAKE) $(build)=3D$(boot) BOOTIMAGE=3D$(KBUILD_IMAGE) install
> + $(Q)$(MAKE) $(build)=3D$(boot) install
>=20
> vdso_install:
> ifeq ($(CONFIG_PPC64),y)
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index b36f911..7173abe 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -123,6 +123,8 @@ targets +=3D $(patsubst
$(obj)/%,%,$(obj-boot) wrapper.a)
> extra-y :=3D $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
> $(obj)/zImage.lds $(obj)/zImage.coff.lds
$(obj)/zImage.ps3.lds
>=20
> +dtstree :=3D $(srctree)/$(src)/dts
> +
> wrapper :=3D$(srctree)/$(src)/wrapper
> wrapperbits :=3D $(extra-y) $(addprefix $(obj)/,addnote hack-coff
mktree dtc) \
> $(wrapper) FORCE
> @@ -191,26 +193,67 @@ image-$(CONFIG_PPC_PRPMC2800) +=3D
zImage.prpmc2800
> image-$(CONFIG_PPC_ISERIES) +=3D zImage.iseries
> image-$(CONFIG_DEFAULT_UIMAGE) +=3D uImage
>=20
> -ifneq ($(CONFIG_DEVICE_TREE),"")
> -image-$(CONFIG_PPC_8xx) +=3D cuImage.8xx
> -image-$(CONFIG_PPC_EP88XC) +=3D zImage.ep88xc
> +#
> +# Targets which embed a device tree blob
> +#
> +# Theses are default targets to build images which embed device tree
blobs.
> +# They are only required on boards which do not have FDT support in
firmware.
> +# Boards with newish u-boot firmare can use the uImage target above
> +#
> +
> +# Board ports in arch/powerpc/platform/40x/Kconfig
> image-$(CONFIG_EP405) +=3D zImage.ep405
> -image-$(CONFIG_8260) +=3D cuImage.pq2
> -image-$(CONFIG_EP8248E) +=3D zImage.ep8248e
> -image-$(CONFIG_PPC_MPC52xx) +=3D cuImage.52xx
> -image-$(CONFIG_STORCENTER) +=3D cuImage.824x
> -image-$(CONFIG_PPC_83xx) +=3D cuImage.83xx
> -image-$(CONFIG_PPC_85xx) +=3D cuImage.85xx
> -image-$(CONFIG_MPC7448HPC2) +=3D cuImage.hpc2
> +image-$(CONFIG_WALNUT) +=3D treeImage.walnut
> +
> +# Board ports in arch/powerpc/platform/44x/Kconfig
> image-$(CONFIG_EBONY) +=3D treeImage.ebony
cuImage.ebony
> image-$(CONFIG_BAMBOO) +=3D treeImage.bamboo
cuImage.bamboo
> image-$(CONFIG_SEQUOIA) +=3D cuImage.sequoia
> image-$(CONFIG_RAINIER) +=3D cuImage.rainier
> -image-$(CONFIG_WALNUT) +=3D treeImage.walnut
> image-$(CONFIG_TAISHAN) +=3D cuImage.taishan
> image-$(CONFIG_KATMAI) +=3D cuImage.katmai
> image-$(CONFIG_WARP) +=3D cuImage.warp
> -endif
> +
> +# Board ports in arch/powerpc/platform/8xx/Kconfig
> +image-$(CONFIG_PPC_MPC86XADS) +=3D zImage.mpc866ads
> +image-$(CONFIG_PPC_MPC885ADS) +=3D zImage.mpc885ads
> +image-$(CONFIG_PPC_EP88XC) +=3D zImage.ep88xc
> +image-$(CONFIG_PPC_ADDER875) +=3D cuImage.adder875-uboot
> +
> +# Board ports in arch/powerpc/platform/52xx/Kconfig
> +image-$(CONFIG_PPC_LITE5200) +=3D cuImage.lite5200
cuImage.lite5200b
> +
> +# Board ports in arch/powerpc/platform/82xx/Kconfig
> +image-$(CONFIG_MPC8272_ADS) +=3D cuImage.mpc8272ads
> +image-$(CONFIG_PQ2FADS) +=3D cuImage.pq2fads
> +image-$(CONFIG_EP8248E) +=3D zImage.ep8248e
> +
> +# Board ports in arch/powerpc/platform/83xx/Kconfig
> +image-$(CONFIG_MPC8313_RDB) +=3D cuImage.mpc8313erdb
> +image-$(CONFIG_MPC832x_MDS) +=3D cuImage.mpc832x_mds
> +image-$(CONFIG_MPC832x_RDB) +=3D cuImage.mpc832x_rdb
> +image-$(CONFIG_MPC834x_ITX) +=3D cuImage.mpc8349emitx \
> + cuImage.mpc8349emitxgp
> +image-$(CONFIG_MPC834x_MDS) +=3D cuImage.mpc834x_mds
> +image-$(CONFIG_MPC836x_MDS) +=3D cuImage.mpc836x_mds
> +image-$(CONFIG_MPC837x_MDS) +=3D cuImage.mpc8377_mds \
> + cuImage.mpc8378_mds \
> + cuImage.mpc8379_mds
> +
> +# Board ports in arch/powerpc/platform/83xx/Kconfig
> +image-$(CONFIG_MPC8540_ADS) +=3D cuImage.mpc8540ads
> +image-$(CONFIG_MPC8560_ADS) +=3D cuImage.mpc8560ads
> +image-$(CONFIG_MPC85xx_CDS) +=3D cuImage.mpc8541cds \
> + cuImage.mpc8548cds \
> + cuImage.mpc8555cds
> +image-$(CONFIG_MPC85xx_MDS) +=3D cuImage.mpc8568mds
> +image-$(CONFIG_MPC85xx_DS) +=3D cuImage.mpc8544ds \
> + cuImage.mpc8572ds
> +
> +# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
> +image-$(CONFIG_STORCENTER) +=3D cuImage.storcenter
> +image-$(CONFIG_PPC_PRPMC2800) +=3D cuImage.prpmc2800
> +image-$(CONFIG_MPC7448HPC2) +=3D cuImage.mpc7448hpc2
>=20
> ifneq ($(CONFIG_REDBOOT),"")
> image-$(CONFIG_PPC_8xx) +=3D zImage.redboot-8xx
> @@ -230,24 +273,14 @@ targets +=3D $(image-y) $(initrd-y)
>=20
> $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
>=20
> -# If CONFIG_WANT_DEVICE_TREE is set and CONFIG_DEVICE_TREE isn't an
> -# empty string, define 'dts' to be path to the dts
> -# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them
> -ifeq ($(CONFIG_WANT_DEVICE_TREE),y)
> -ifneq ($(CONFIG_DEVICE_TREE),"")
> -dts =3D $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
> - ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=3D%)
> -endif
> -endif
> -
> # Don't put the ramdisk on the pattern rule; when its missing make
will try
> # the pattern rule with less dependencies that also matches (even
with the
> # hard dependency listed).
> -$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(dts)
> - $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz)
> +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
> + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
>=20
> -$(obj)/zImage.%: vmlinux $(wrapperbits) $(dts)
> - $(call if_changed,wrap,$*,$(dts))
> +$(obj)/zImage.%: vmlinux $(wrapperbits)
> + $(call if_changed,wrap,$*)
>=20
> # This cannot be in the root of $(src) as the zImage rule always adds
a $(obj)
> # prefix
> @@ -259,22 +292,42 @@ $(obj)/zImage.iseries: vmlinux
>=20
> $(obj)/zImage.ps3: vmlinux $(wrapper) $(wrapperbits)
$(srctree)/$(src)/dts/ps3.dts
> $(STRIP) -s -R .comment $< -o vmlinux.strip
> - $(call cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,)
> + $(call cmd,wrap,ps3,$(dtstree)/ps3.dts,,)
>=20
> $(obj)/zImage.initrd.ps3: vmlinux $(wrapper) $(wrapperbits)
$(srctree)/$(src)/dts/ps3.dts
> $(obj)/ramdisk.image.gz
> - $(call
cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,$(obj)/ramdisk.image.gz)
> + $(call cmd,wrap,ps3,$(dtstree)/ps3.dts,,$(obj)/ramdisk.image.gz)
> +
> +zImage.ep405: vmlinux $(wrapperbits) $(dtstree)/ep405.dts
> + $(call if_changed,wrap,$*,$(dtstree)/ep405.dts)
> +zImage.initrd.ep405: vmlinux $(wrapperbits) $(dtstree)/ep405.dts
> + $(call
if_changed,wrap,$*,$(dtstree)/ep405.dts,,$(obj)/ramdisk.image.gz)
> +
> +zImage.mpc866ads: vmlinux $(wrapperbits) $(dtstree)/mpc866ads.dts
> + $(call if_changed,wrap,$*,$(dtstree)/mpc866ads.dts)
> +zImage.initrd.mpc866ads: vmlinux $(wrapperbits)
$(dtstree)/mpc866ads.dts
> + $(call
if_changed,wrap,$*,$(dtstree)/mpc866ads.dts,,$(obj)/ramdisk.image.gz)
> +
> +zImage.mpc885ads: vmlinux $(wrapperbits) $(dtstree)/mpc885ads.dts
> + $(call if_changed,wrap,$*,$(dtstree)/mpc885ads.dts)
> +zImage.initrd.mpc885ads: vmlinux $(wrapperbits)
$(dtstree)/mpc885ads.dts
> + $(call
if_changed,wrap,$*,$(dtstree)/mpc885ads.dts,,$(obj)/ramdisk.image.gz)
> +
> +zImage.ep88xc: vmlinux $(wrapperbits) $(dtstree)/ep88xc.dts
> + $(call if_changed,wrap,$*,$(dtstree)/ep88xc.dts)
> +zImage.initrd.ep88xc: vmlinux $(wrapperbits) $(dtstree)/ep88xc.dts
> + $(call
if_changed,wrap,$*,$(dtstree)/ep88xc.dts,,$(obj)/ramdisk.image.gz)
It seems like all you've done here is expand out the $(obj)/zImage.%
rule?, but now the $* has nothing to match to? I don't think this
works.
How about just:
$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) %.dts
$(call if_changed,wrap,$*,$*.dts,,$(obj)/ramdisk.image.gz)
Which would handle the default case of platform code for each dts.
Then for cases where you have a multiplatform target, you'd have
something like
$(obj)/zImage.initrd.virtex.%: vmlinux $(wrapperbits) %.dts
$(call if_changed,wrap,virtex,$*.dts,,$(obj)/ramdisk.image.gz)
>=20
> $(obj)/uImage: vmlinux $(wrapperbits)
> $(call if_changed,wrap,uboot)
>=20
> -$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits)
> - $(call if_changed,wrap,cuboot-$*,$(dts))
> +$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
> + $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
>=20
> -$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits)
> - $(call
if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz)
> +$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
> + $(call
if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
>=20
> -$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits)
> - $(call if_changed,wrap,treeboot-$*,$(dts))
> +$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
> + $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
>=20
> # If there isn't a platform selected then just strip the vmlinux.
> ifeq (,$(image-y))
> @@ -283,8 +336,10 @@ endif
>=20
> $(obj)/zImage: $(addprefix $(obj)/, $(image-y))
> @rm -f $@; ln $< $@
> + @echo target images: $(image-y)
> $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
> @rm -f $@; ln $< $@
> + @echo target images: $(initrd-y)
>=20
> install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
> sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux
System.map "$(INSTALL_PATH)" $<
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 763a0c4..b70ec6a 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -158,6 +158,26 @@ miboot|uboot)
> cuboot*)
> binary=3Dy
> gzip=3D
> + case "$platform" in
> + *-mpc885ads|*-adder875*|*-ep88xc)
> + platformo=3D$object/cuboot-8xx.o
> + ;;
> + *5200*|*-motionpro)
> + platformo=3D$object/cuboot-52xx.o
> + ;;
> + *-pq2fads|*-ep8248e|*-mpc8272*)
> + platformo=3D$object/cuboot-pq2.o
> + ;;
> + *-mpc824*)
> + platformo=3D$object/cuboot-824x.o
> + ;;
> + *-mpc83*)
> + platformo=3D$object/cuboot-83xx.o
> + ;;
> + *-mpc85*)
> + platformo=3D$object/cuboot-85xx.o
> + ;;
> + esac
> ;;
> ps3)
> platformo=3D"$object/ps3-head.o $object/ps3-hvcall.o =
$object/ps3.o"
I'm not particularly fond of making the wrapper smarter... It seems
like the wrapper should be stupid and the logic about what to include
done in the Makefile or in Kconfig. Also, it seems like a strange place
to explicitly encode the dependency between the name of the dts file and
the platform code.
Steve
>=20
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [RFC] [POWERPC] bootwrapper: build multiple cuImages
From: Grant Likely @ 2008-01-31 2:40 UTC (permalink / raw)
To: Stephen Neuendorffer; +Cc: scottwood, linuxppc-dev
In-Reply-To: <20080131014952.83827290071@mail95-dub.bigfish.com>
On 1/30/08, Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> wrote:
>
> I like the spirit... It does seem like the compiled in device tree is
> specified in the wrong place.
heh, thanks. :-)
> > +zImage.mpc866ads: vmlinux $(wrapperbits) $(dtstree)/mpc866ads.dts
> > + $(call if_changed,wrap,$*,$(dtstree)/mpc866ads.dts)
> > +zImage.initrd.mpc866ads: vmlinux $(wrapperbits)
> $(dtstree)/mpc866ads.dts
> > + $(call
> if_changed,wrap,$*,$(dtstree)/mpc866ads.dts,,$(obj)/ramdisk.image.gz)
> > +
> > +zImage.mpc885ads: vmlinux $(wrapperbits) $(dtstree)/mpc885ads.dts
> > + $(call if_changed,wrap,$*,$(dtstree)/mpc885ads.dts)
> > +zImage.initrd.mpc885ads: vmlinux $(wrapperbits)
> $(dtstree)/mpc885ads.dts
> > + $(call
> if_changed,wrap,$*,$(dtstree)/mpc885ads.dts,,$(obj)/ramdisk.image.gz)
> > +
> > +zImage.ep88xc: vmlinux $(wrapperbits) $(dtstree)/ep88xc.dts
> > + $(call if_changed,wrap,$*,$(dtstree)/ep88xc.dts)
> > +zImage.initrd.ep88xc: vmlinux $(wrapperbits) $(dtstree)/ep88xc.dts
> > + $(call
> if_changed,wrap,$*,$(dtstree)/ep88xc.dts,,$(obj)/ramdisk.image.gz)
>
> It seems like all you've done here is expand out the $(obj)/zImage.%
> rule?, but now the $* has nothing to match to? I don't think this
> works.
Oops, that's a mistake. $* should have been replaced.
>
> How about just:
> $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) %.dts
> $(call if_changed,wrap,$*,$*.dts,,$(obj)/ramdisk.image.gz)
mpc866ads, mpc885ads and ep88xc are oddities in that they build
zImages with embedded device tree blobs. Most zImages don't do that
and zImage* is an overloaded target. Only the three boards above have
.dts files that should be included. Doing it this way matches the
method used for the ps3 zImages.
Consider for instance when zImage.chrp is built. With the rule above,
the wrapper would go looking for chrp.dts and fail when it couldn't
find it. The old rule works because dts is set to nothing if
CONFIG_DEVICE_TREE is not set and the wrapper just passes over the dts
processing commands.
I could change the wrapper to just skip dts files that don't exist,
but I don't think that is the right behavior either. Then you'll have
inconsistent behavior when files are present/absent and there are
cases (like the three boards above) where we *want* the wrapper to
fail if the dts file is missing.
One option would be to add two new targets: zImage.dtb.% and
zImage.initrd.dtb.%, but I'm not sure if it is a good idea.
>
> Which would handle the default case of platform code for each dts.
>
> Then for cases where you have a multiplatform target, you'd have
> something like
> $(obj)/zImage.initrd.virtex.%: vmlinux $(wrapperbits) %.dts
> $(call if_changed,wrap,virtex,$*.dts,,$(obj)/ramdisk.image.gz)
cuImage is already an example of exactly this, except for the mapping
between cuImage-*.c and .dts files. Also, I think the '.virtex' in
the above example is superfluous. The .dts file itself discribes the
platform as a virtex platform.
However, specifically for the virtex, we still need something like:
zImage.raw.% or elfImage.%. (I'd like to avoid overloading zImage
even more, so 'elfImage' or something like it is probably the better
choice).
> > diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> > index 763a0c4..b70ec6a 100755
> > --- a/arch/powerpc/boot/wrapper
> > +++ b/arch/powerpc/boot/wrapper
> > @@ -158,6 +158,26 @@ miboot|uboot)
> > cuboot*)
> > binary=y
> > gzip=
> > + case "$platform" in
> > + *-mpc885ads|*-adder875*|*-ep88xc)
> > + platformo=$object/cuboot-8xx.o
> > + ;;
> > + *5200*|*-motionpro)
> > + platformo=$object/cuboot-52xx.o
> > + ;;
> > + *-pq2fads|*-ep8248e|*-mpc8272*)
> > + platformo=$object/cuboot-pq2.o
> > + ;;
> > + *-mpc824*)
> > + platformo=$object/cuboot-824x.o
> > + ;;
> > + *-mpc83*)
> > + platformo=$object/cuboot-83xx.o
> > + ;;
> > + *-mpc85*)
> > + platformo=$object/cuboot-85xx.o
> > + ;;
> > + esac
> > ;;
> > ps3)
> > platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
>
> I'm not particularly fond of making the wrapper smarter... It seems
> like the wrapper should be stupid and the logic about what to include
> done in the Makefile or in Kconfig. Also, it seems like a strange place
> to explicitly encode the dependency between the name of the dts file and
> the platform code.
No; I'm not totally sold on this approach either, but there is already
precedence in the wrapper and I can't think of a cleaner or easier
place to map dts files to cuboot-* objects.
Thanks for the comments
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH] [POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=y
From: Olof Johansson @ 2008-01-31 3:34 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev, torvalds
In-Reply-To: <18337.8955.539106.868486@cargo.ozlabs.ibm.com>
Looks like "[POWERPC] kdump shutdown hook support" broke builds when
CONFIG_DEBUGGER=n and CONFIG_KEXEC=y, such as in g5_defconfig:
arch/powerpc/kernel/crash.c: In function 'default_machine_crash_shutdown':
arch/powerpc/kernel/crash.c:388: error: '__debugger_fault_handler' undeclared (first use in this function)
arch/powerpc/kernel/crash.c:388: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/crash.c:388: error: for each function it appears in.)
Move the debugger hooks to under CONFIG_DEBUGGER || CONFIG_KEXEC, since
that's when the crash code is enabled.
(I should have caught this with my build-script pre-merge, my bad. :( )
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 848a204..4b5b7ff 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -54,7 +54,7 @@
#endif
#include <asm/kexec.h>
-#ifdef CONFIG_DEBUGGER
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
int (*__debugger)(struct pt_regs *regs);
int (*__debugger_ipi)(struct pt_regs *regs);
int (*__debugger_bpt)(struct pt_regs *regs);
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index bc9739d..8d37283 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -65,7 +65,7 @@
struct task_struct;
struct pt_regs;
-#ifdef CONFIG_DEBUGGER
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
extern int (*__debugger)(struct pt_regs *regs);
extern int (*__debugger_ipi)(struct pt_regs *regs);
^ permalink raw reply related
* RE: [PATCH 3/6] Move include/asm-ppc/rio.h to include/asm-powerpc/rio.h
From: Zhang Wei @ 2008-01-31 3:36 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <AF5092BE-3384-44F8-A104-560DD4331726@kernel.crashing.org>
=20
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
> On Jan 30, 2008, at 4:30 AM, Zhang Wei wrote:
>=20
> > Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> > ---
> > include/asm-powerpc/rio.h | 18 ++++++++++++++++++
> > include/asm-ppc/rio.h | 18 ------------------
> > 2 files changed, 18 insertions(+), 18 deletions(-)
> > create mode 100644 include/asm-powerpc/rio.h
> > delete mode 100644 include/asm-ppc/rio.h
>=20
> it seems with OF we can just git rid of this?
>=20
Aha, yep :), The change just make the RIO driver in arch/powerpc can be
compiled with RapidIO OF patch.
If we have OF patch, you can drop this patch.
Thanks!
Wei.
^ permalink raw reply
* build error with kdump shutdown hook support
From: Geoff Levand @ 2008-01-31 3:22 UTC (permalink / raw)
To: Michael Neuling; +Cc: linuxppc-dev@ozlabs.org
Hi.
It seems something is missing in the current
linux-2.6.git (8af03e782cae1e0a0f530ddd22301cdd12cf9dc0).
CC arch/powerpc/kernel/crash.o
arch/powerpc/kernel/crash.c: In function 'default_machine_crash_shutdown':
arch/powerpc/kernel/crash.c:388: error: '__debugger_fault_handler' undeclared (first use in this function)
arch/powerpc/kernel/crash.c:388: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/crash.c:388: error: for each function it appears in.)
commit 496b010e1e70a9b4286fa34f19523f24a194f119
Author: Michael Neuling <mikey@neuling.org>
Date: Fri Jan 18 15:50:30 2008 +1100
[POWERPC] kdump shutdown hook support
This adds hooks into the default_machine_crash_shutdown so drivers can
register a function to be run in the first kernel before we hand off
to the second kernel. This should only be used in exceptional
circumstances, like where the device can't be reset in the second
kernel alone (as is the case with eHEA). To emphasize this, the
number of handles allowed to be registered is currently #def to 1.
This uses the setjmp/longjmp code around the call out to the
registered hooks, so any bogus exceptions we encounter will hopefully
be recoverable.
Tested with bogus data and instruction exceptions.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
^ permalink raw reply
* Re: [PATCH] IB/ehca: Prevent sending UD packets to QP0
From: Roland Dreier @ 2008-01-31 4:06 UTC (permalink / raw)
To: Joachim Fenkes
Cc: LKML, OF-EWG, LinuxPPC-Dev, Christoph Raisch, OF-General,
Stefan Roscher
In-Reply-To: <200801241759.09065.fenkes@de.ibm.com>
thanks, applied
^ permalink raw reply
* Re: [PATCH 2/2] IB/ehca: Add PMA support
From: Roland Dreier @ 2008-01-31 4:09 UTC (permalink / raw)
To: Joachim Fenkes
Cc: LKML, OF-EWG, LinuxPPC-Dev, Christoph Raisch, OF-General,
Stefan Roscher
In-Reply-To: <200801252118.28122.fenkes@de.ibm.com>
thanks, applied 1-2
^ permalink raw reply
* git tree rebased
From: Kumar Gala @ 2008-01-31 4:22 UTC (permalink / raw)
To: linuxppc-dev list; +Cc: linuxppc-embedded
Now that all the changes I had in my tree are in Linus's tree I'm
rebasing the master branch of my git tree to match linus.
git.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git
Anyone using my tree should do a git-pull -f.
- k
^ permalink raw reply
* Re: build error with kdump shutdown hook support
From: Olof Johansson @ 2008-01-31 4:22 UTC (permalink / raw)
To: Geoff Levand; +Cc: linuxppc-dev@ozlabs.org, Michael Neuling
In-Reply-To: <47A13EEB.8030806@am.sony.com>
On Wed, Jan 30, 2008 at 07:22:19PM -0800, Geoff Levand wrote:
> Hi.
>
> It seems something is missing in the current
> linux-2.6.git (8af03e782cae1e0a0f530ddd22301cdd12cf9dc0).
See:
http://patchwork.ozlabs.org/linuxppc/patch?id=16607
Or add a separate handler instead of reusing the debugger one, either
way works for me. I went with the easier option.
-Olof
^ permalink raw reply
* Re: [PATCH v3] powerpc: configure USB clock for MPC8315E
From: Kumar Gala @ 2008-01-31 4:30 UTC (permalink / raw)
To: Kim Phillips; +Cc: olof, linuxppc-dev, Jerry Huang
In-Reply-To: <20080130124619.32484395.kim.phillips@freescale.com>
On Jan 30, 2008, at 12:46 PM, Kim Phillips wrote:
> SCCR USB bits are in a different location on the mpc8315.
>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
> ---
> changed to detect parent node compatibility with fsl,mpc8315-immr, and
> do a of_node_put when done.
>
> arch/powerpc/boot/dts/mpc8315erdb.dts | 2 +-
> arch/powerpc/platforms/83xx/mpc83xx.h | 2 ++
> arch/powerpc/platforms/83xx/usb.c | 17 +++++++++++++----
> 3 files changed, 16 insertions(+), 5 deletions(-)
applied.
- k
^ permalink raw reply
* Re: [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure (was: Re: fixed phy support (warning related to FIXED_MII_100_FDX))
From: Kumar Gala @ 2008-01-31 4:30 UTC (permalink / raw)
To: avorontsov; +Cc: linuxppc-dev list, Eugene Konev, Jeff Garzik, netdev
In-Reply-To: <20080121204953.GA11384@localhost.localdomain>
> From: Anton Vorontsov <avorontsov@ru.mvista.com>
> Subject: [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure
>
> This patch converts cpmac to the new Fixed PHY infrastructure,
> though it
> doesn't fix all the problems with that driver. I didn't even bother to
> test this patch to compile, because cpmac driver is broken in
> several ways:
>
> 1. This driver won't compile by itself because lack of its header
> describing
> platform data;
> 2. It assumes that fixed PHYs should be created by the ethernet
> driver.
> It is wrong assumption: fixed PHYs creation is platform code
> authority,
> driver must blindly accept bus_id and phy_id platform data variables
> instead.
>
> Also, it seem that that driver doesn't have actual in-tree users, so
> nothing to fix further.
>
> The main purpose of that patch is to get rid of the following Kconfig
> warning:
>
> scripts/kconfig/conf -s arch/powerpc/Kconfig
> drivers/net/Kconfig:1713:warning: 'select' used by config symbol
> 'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> drivers/net/Kconfig | 4 +--
> drivers/net/cpmac.c | 55 +++++++++++++++
> +----------------------------------
> 2 files changed, 19 insertions(+), 40 deletions(-)
applied.
- k
^ permalink raw reply
* RE: [PATCH 4/6] Add multi mport support.
From: Zhang Wei @ 2008-01-31 5:57 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <AF4B8466-C1CE-4FFB-8341-4BFC1CB76116@kernel.crashing.org>
=20
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
>=20
> On Jan 30, 2008, at 4:30 AM, Zhang Wei wrote:
>=20
> > Change lots of static variable to mport private. And add=20
> mport to some
> > function declaration.
>=20
> Can you explain this patch further. Its not clear exactly from this =20
> commit message why we are doing this.
>=20
> - k
Sorry about I have a little hurry about it.
The original RapidIO driver suppose there is only one mpc85xx RIO
controller
in system. So, some data structures are defined as mpc85xx_rio global,
such as 'regs_win', 'dbell_ring', 'msg_tx_ring'. Now, I changed them to
mport's private members. And you can define multi RIO OF-nodes in dts
file
for multi RapidIO controller in one processor, such as PCI/PCI-Ex host
controllers
in Freescale's silicon. And the mport operation function declaration
should be changed
to know which RapidIO controller is target.
Thanks!
Wei
^ permalink raw reply
* Re: [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .
From: Kumar Gala @ 2008-01-31 6:15 UTC (permalink / raw)
To: Zhang Wei; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <ABF87B0B6A38C0458E319AC973ED68AEBD0683@zch01exm26.fsl.freescale.net>
On Jan 31, 2008, at 12:04 AM, Zhang Wei wrote:
> All right, I'll give you another patch for 86xx dts file. :)
>
> Btw: Why the PCI and other nodes were moved from SOC? Just for clear?
> If they are moved out, their register address must use full address
> not
> offset address.
we did this because the feeling was the SOC node just represented the
IMMR/CCSBAR registers, and not the address space used by the various
busses.
(this is why pci, rio, and local bus all exist outside of the soc node).
- k
^ permalink raw reply
* Re: [PATCH 4/6] Add multi mport support.
From: Kumar Gala @ 2008-01-31 6:15 UTC (permalink / raw)
To: Zhang Wei; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <ABF87B0B6A38C0458E319AC973ED68AEBD0677@zch01exm26.fsl.freescale.net>
On Jan 30, 2008, at 11:57 PM, Zhang Wei wrote:
>
>
>> -----Original Message-----
>> From: Kumar Gala [mailto:galak@kernel.crashing.org]
>>
>> On Jan 30, 2008, at 4:30 AM, Zhang Wei wrote:
>>
>>> Change lots of static variable to mport private. And add
>> mport to some
>>> function declaration.
>>
>> Can you explain this patch further. Its not clear exactly from this
>> commit message why we are doing this.
>>
>> - k
>
> Sorry about I have a little hurry about it.
>
> The original RapidIO driver suppose there is only one mpc85xx RIO
> controller
> in system. So, some data structures are defined as mpc85xx_rio global,
> such as 'regs_win', 'dbell_ring', 'msg_tx_ring'. Now, I changed them
> to
> mport's private members. And you can define multi RIO OF-nodes in dts
> file
> for multi RapidIO controller in one processor, such as PCI/PCI-Ex host
> controllers
> in Freescale's silicon. And the mport operation function declaration
> should be changed
> to know which RapidIO controller is target.
thanks, this makes a lot of sense and now reviewing the patch will
make some sense to me :)
- k
^ permalink raw reply
* Re: [PATCH 4/6] Add multi mport support.
From: Kumar Gala @ 2008-01-31 6:20 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <EC566605-6890-4983-8700-3B15C9EFC1C5@kernel.crashing.org>
On Jan 31, 2008, at 12:15 AM, Kumar Gala wrote:
>
> On Jan 30, 2008, at 11:57 PM, Zhang Wei wrote:
>
>>
>>
>>> -----Original Message-----
>>> From: Kumar Gala [mailto:galak@kernel.crashing.org]
>>>
>>> On Jan 30, 2008, at 4:30 AM, Zhang Wei wrote:
>>>
>>>> Change lots of static variable to mport private. And add
>>> mport to some
>>>> function declaration.
>>>
>>> Can you explain this patch further. Its not clear exactly from this
>>> commit message why we are doing this.
>>>
>>> - k
>>
>> Sorry about I have a little hurry about it.
>>
>> The original RapidIO driver suppose there is only one mpc85xx RIO
>> controller
>> in system. So, some data structures are defined as mpc85xx_rio
>> global,
>> such as 'regs_win', 'dbell_ring', 'msg_tx_ring'. Now, I changed them
>> to
>> mport's private members. And you can define multi RIO OF-nodes in dts
>> file
>> for multi RapidIO controller in one processor, such as PCI/PCI-Ex
>> host
>> controllers
>> in Freescale's silicon. And the mport operation function declaration
>> should be changed
>> to know which RapidIO controller is target.
>
> thanks, this makes a lot of sense and now reviewing the patch will
> make some sense to me :)
when we have multiple ports are the device IDs on the ports intended
to be unique only to a port or unique across all ports?
- k
^ permalink raw reply
* RE: [PATCH 4/6] Add multi mport support.
From: Zhang Wei @ 2008-01-31 6:30 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <F2D2FCC7-D1ED-4DC6-BE7A-EE2755CCE125@kernel.crashing.org>
=20
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
>=20
> On Jan 31, 2008, at 12:15 AM, Kumar Gala wrote:
>=20
> >
> > On Jan 30, 2008, at 11:57 PM, Zhang Wei wrote:
> >
> >>
> >>
> >>> -----Original Message-----
> >>> From: Kumar Gala [mailto:galak@kernel.crashing.org]
> >>>
> >>> On Jan 30, 2008, at 4:30 AM, Zhang Wei wrote:
> >>>
> >>>> Change lots of static variable to mport private. And add
> >>> mport to some
> >>>> function declaration.
> >>>
> >>> Can you explain this patch further. Its not clear=20
> exactly from this
> >>> commit message why we are doing this.
> >>>
> >>> - k
> >>
> >> Sorry about I have a little hurry about it.
> >>
> >> The original RapidIO driver suppose there is only one mpc85xx RIO
> >> controller
> >> in system. So, some data structures are defined as mpc85xx_rio =20
> >> global,
> >> such as 'regs_win', 'dbell_ring', 'msg_tx_ring'. Now, I=20
> changed them
> >> to
> >> mport's private members. And you can define multi RIO=20
> OF-nodes in dts
> >> file
> >> for multi RapidIO controller in one processor, such as PCI/PCI-Ex =20
> >> host
> >> controllers
> >> in Freescale's silicon. And the mport operation function=20
> declaration
> >> should be changed
> >> to know which RapidIO controller is target.
> >
> > thanks, this makes a lot of sense and now reviewing the patch will
> > make some sense to me :)
>=20
> when we have multiple ports are the device IDs on the ports intended =20
> to be unique only to a port or unique across all ports?
>=20
I consider each RIO controller will has its own network, the device IDs
should be
unique only in its port network.
Cheers!
Wei
^ permalink raw reply
* RE: [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .
From: Zhang Wei @ 2008-01-31 6:04 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <A3EAB036-F69D-48DD-8CA9-4EAAE63AE1F5@kernel.crashing.org>
All right, I'll give you another patch for 86xx dts file. :)
Btw: Why the PCI and other nodes were moved from SOC? Just for clear?
If they are moved out, their register address must use full address not
offset address.
Thanks!
Wei.
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
> Sent: Wednesday, January 30, 2008 10:44 PM
> To: Zhang Wei
> Cc: mporter@kernel.crashing.org;=20
> linux-kernel@vger.kernel.org; linuxppc-dev@ozlabs.org
> Subject: Re: [PATCH 1/6] Change RIO function mpc85xx_ to fsl_ .
>=20
> Can you post a device tree update as well.
>=20
> The older patches on the list for the 86xx .dts should NOT=20
> put the rio =20
> node under the soc. It should be at the same level as PCI.
>=20
> - k
>=20
^ permalink raw reply
* [PATCH] [POWERPC] Set dma_data correctly for direct_ops on pasemi
From: Olof Johansson @ 2008-01-31 6:41 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev, torvalds
In-Reply-To: <18337.8955.539106.868486@cargo.ozlabs.ibm.com>
More late-caught fallout from the mainline merge. The patch:
[POWERPC] Use archdata.dma_data in dma_direct_ops and add the offset
"Now that all platforms using dma_direct_offset setup the
archdata.dma_data correctly, ..."
Nope -- the pasemi iommu setup code that disables translation on the
DMA pci device didn't set dma_data correctly.
The below patch is needed, please merge as soon as practical. Thanks!
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 9916a0f..c5cfd4b 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -182,8 +182,10 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
* CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE at build time.
*/
if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
- !firmware_has_feature(FW_FEATURE_LPAR))
+ !firmware_has_feature(FW_FEATURE_LPAR)) {
dev->dev.archdata.dma_ops = &dma_direct_ops;
+ dev->dev.archdata.dma_data = 0;
+ }
#endif
dev->dev.archdata.dma_data = &iommu_table_iobmap;
^ permalink raw reply related
* [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file
From: y @ 2008-01-31 7:45 UTC (permalink / raw)
To: galak; +Cc: linuxppc-dev
From: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 556a9ca..1a0fce5 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -25,6 +25,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ rapidio0 = &rapidio0;
};
cpus {
@@ -499,4 +500,16 @@
0 00100000>;
};
};
+
+ rapidio0: rapidio@f80c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <f80c0000 20000>;
+ ranges = <0 0 c0000000 0 20000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+ };
};
--
1.5.2
^ permalink raw reply related
* [PATCH 2/2] Add RapidIO node probing into MPC86xx_HPCN board id table.
From: y @ 2008-01-31 7:45 UTC (permalink / raw)
To: galak; +Cc: linuxppc-dev
In-Reply-To: <12017655292517-git-send-email-y>
From: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c5..4a3e421 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -215,6 +215,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
--
1.5.2
^ permalink raw reply related
* [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file
From: Zhang Wei @ 2008-01-31 7:46 UTC (permalink / raw)
To: galak; +Cc: linuxppc-dev
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 556a9ca..1a0fce5 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -25,6 +25,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ rapidio0 = &rapidio0;
};
cpus {
@@ -499,4 +500,16 @@
0 00100000>;
};
};
+
+ rapidio0: rapidio@f80c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <f80c0000 20000>;
+ ranges = <0 0 c0000000 0 20000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
+ };
};
--
1.5.2
^ permalink raw reply related
* [PATCH 2/2] Add RapidIO node probing into MPC86xx_HPCN board id table.
From: Zhang Wei @ 2008-01-31 7:46 UTC (permalink / raw)
To: galak; +Cc: linuxppc-dev
In-Reply-To: <12017656032841-git-send-email-wei.zhang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c5..4a3e421 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -215,6 +215,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
--
1.5.2
^ permalink raw reply related
* RE: [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file
From: Zhang Wei @ 2008-01-31 7:36 UTC (permalink / raw)
To: galak; +Cc: linuxppc-dev
In-Reply-To: <12017655292517-git-send-email-y>
Sorry for wrong sending name of this and next email.
Best Regards,
Wei.=20
> -----Original Message-----
> From: y [mailto:y]=20
> Sent: Thursday, January 31, 2008 3:45 PM
> To: galak@kernel.crashing.org
> Cc: linuxppc-dev@ozlabs.org; Zhang Wei
> Subject: [PATCH 1/2] Add RapidIO node into MPC8641HPCN dts file
>=20
> From: Zhang Wei <wei.zhang@freescale.com>
>=20
> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
> ---
> arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>=20
> diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts=20
> b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> index 556a9ca..1a0fce5 100644
> --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> @@ -25,6 +25,7 @@
> serial1 =3D &serial1;
> pci0 =3D &pci0;
> pci1 =3D &pci1;
> + rapidio0 =3D &rapidio0;
> };
> =20
> cpus {
> @@ -499,4 +500,16 @@
> 0 00100000>;
> };
> };
> +
> + rapidio0: rapidio@f80c0000 {
> + #address-cells =3D <2>;
> + #size-cells =3D <2>;
> + compatible =3D "fsl,rapidio-delta";
> + reg =3D <f80c0000 20000>;
> + ranges =3D <0 0 c0000000 0 20000000>;
> + interrupt-parent =3D <&mpic>;
> + /* err_irq bell_outb_irq bell_inb_irq
> + msg1_tx_irq msg1_rx_irq msg2_tx_irq=20
> msg2_rx_irq */
> + interrupts =3D <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
> + };
> };
> --=20
> 1.5.2
>=20
>=20
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox