LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
* Re: [PATCH 1/2] powerpc: publish 85xx soc dts entries as of_device
From: Grant Likely @ 2008-02-11 23:12 UTC (permalink / raw)
  To: Dave Jiang; +Cc: linuxppc-dev
In-Reply-To: <20080211203243.GA5331@blade.az.mvista.com>

On Feb 11, 2008 1:32 PM, Dave Jiang <djiang@mvista.com> wrote:
> Publish the devices listed in dts under SOC as of_device just like what
> mpc85xx_mds platforms do. The 85xx cds and ads platforms currently do not
> export the devices in dts as of_device.
>
> The memory controller, L2 cache-controller, and the PCI controller(s) are
> published as of_device so the mpc85xx EDAC driver can claim them for usage.
>
> Signed-off-by: Dave Jiang <djiang@mvista.com>
>
> ---
> commit 187841bf9dff25e4ac1a7174daa55bb036c724b1
> tree 3206ffbbfc5075d195345281f72f7b52f060b41b
> parent a99824f327c748b2753f4fa570eb1fefcd6a9c4d
> author Dave Jiang <djiang@mvista.com> Mon, 11 Feb 2008 12:51:33 -0700
> committer Dave Jiang <djiang@blade.(none)> Mon, 11 Feb 2008 12:51:33 -0700
>
>  arch/powerpc/platforms/85xx/mpc85xx_ads.c |   19 +++++++++++++++++++
>  arch/powerpc/platforms/85xx/mpc85xx_cds.c |   19 +++++++++++++++++++
>  2 files changed, 38 insertions(+), 0 deletions(-)
>
> mpc85xx EDAC driver is in mainline kernel now
>
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
> index 4e03050..024393c 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
> @@ -26,6 +26,8 @@
>  #include <asm/mpic.h>
>  #include <mm/mmu_decl.h>
>  #include <asm/udbg.h>
> +#include <asm/of_device.h>
> +#include <asm/of_platform.h>
>
>  #include <sysdev/fsl_soc.h>
>  #include <sysdev/fsl_pci.h>
> @@ -249,6 +251,23 @@ static int __init mpc85xx_ads_probe(void)
>          return of_flat_dt_is_compatible(root, "MPC85xxADS");
>  }
>
> +static struct of_device_id mpc85xx_ids[] = {
> +       { .type = "soc", },
> +       { .compatible = "soc", },
> +       {},
> +};
> +
> +static int __init mpc85xx_publish_devices(void)
> +{
> +       if (!machine_is(mpc85xx_ads))
> +               return 0;
> +
> +       of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
> +
> +       return 0;
> +}
> +device_initcall(mpc85xx_publish_devices);

machine_device_initcall() please.  (which lets you eliminate the
machine_is() test).

> +
> +static int __init mpc85xx_publish_devices(void)
> +{
> +       if (!machine_is(mpc85xx_cds))
> +               return 0;
> +
> +       of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
> +
> +       return 0;
> +}
> +device_initcall(mpc85xx_publish_devices);
> +

ditto

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

^ permalink raw reply

* Re: [PATCH 2/2] powerpc: create mpc85xx pci err platform device for EDAC
From: Stephen Rothwell @ 2008-02-11 23:32 UTC (permalink / raw)
  To: Dave Jiang; +Cc: linuxppc-dev
In-Reply-To: <20080211203445.GB5331@blade.az.mvista.com>

[-- Attachment #1: Type: text/plain, Size: 868 bytes --]

Hi Dave,

On Mon, 11 Feb 2008 13:34:45 -0700 Dave Jiang <djiang@mvista.com> wrote:
>
> +++ b/arch/powerpc/sysdev/fsl_pci.c
> +static int __init mpc85xx_pcierr_setup(void)
> +{
> +	struct device_node *np = NULL;

You don't need to initialiase this as it is first used in
for_each_compatible_node().

> +	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") {

> +		of_dev = of_find_device_by_node(np);
> +		if (!of_dev)
> +			return -ENODEV;

You need an of_node_put(np) before you return.

> +		pdev = platform_device_alloc("mpc85xx_pci_err", id++);
> +		if (!pdev)
> +			return -ENOMEM;

And again.

> +	}
> +	return 0;
> +
> +error:
> +	platform_device_put(pdev);

You need an of_node_put(np) here.

> +	return err;
> +}
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply

* Re: [PATCH 1/2] powerpc: publish 85xx soc dts entries as of_device
From: Stephen Rothwell @ 2008-02-11 23:36 UTC (permalink / raw)
  To: Dave Jiang; +Cc: linuxppc-dev
In-Reply-To: <20080211203243.GA5331@blade.az.mvista.com>

[-- Attachment #1: Type: text/plain, Size: 1244 bytes --]

Hi Dave,

On Mon, 11 Feb 2008 13:32:43 -0700 Dave Jiang <djiang@mvista.com> wrote:
>
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
> @@ -26,6 +26,8 @@
>  #include <asm/mpic.h>
>  #include <mm/mmu_decl.h>
>  #include <asm/udbg.h>
> +#include <asm/of_device.h>
> +#include <asm/of_platform.h>

Like Jon said ...

> +static struct of_device_id mpc85xx_ids[] = {

make this __initdata

> +static int __init mpc85xx_publish_devices(void)
> +{
> +	if (!machine_is(mpc85xx_ads))
> +		return 0;

You don't need this if you make the change below.

> +	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
> +
> +	return 0;
> +}
> +device_initcall(mpc85xx_publish_devices);

machine_devce_initcall(mpc85xx_ads, mpc85xx_publish_devices);

> +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c

> +static struct of_device_id mpc85xx_ids[] = {

__initdata

> +static int __init mpc85xx_publish_devices(void)
> +{
> +	if (!machine_is(mpc85xx_cds))
> +		return 0;
> +
> +	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
> +
> +	return 0;
> +}
> +device_initcall(mpc85xx_publish_devices);

Same as above.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply

* Re: [PATCH] powerpc: Marvell 64x60 EDAC platform devices setup
From: Stephen Rothwell @ 2008-02-11 23:51 UTC (permalink / raw)
  To: Dave Jiang; +Cc: linuxppc-dev, paulus
In-Reply-To: <20080211225023.GA15541@blade.az.mvista.com>

[-- Attachment #1: Type: text/plain, Size: 931 bytes --]

Hi Dave,

On Mon, 11 Feb 2008 15:50:23 -0700 Dave Jiang <djiang@mvista.com> wrote:
>
> +static int __init mv64x60_edac_pdev_init(struct device_node *np,
> +                                         int id,
> +                                         int num_addr,
> +                                         char *pdev_name)

The pdev_name is just passed to platform_device_register_simple() which
take a "const char *", so make pdev_name consta as well, please.

> +static int __init mv64x60_pci_fixup(struct device_node *np)
> +{
> +	struct resource res;
> +	void __iomem *pci_serr;
> +	int ret;
> +
> +	ret = of_address_to_resource(np, 1, &res);
> +	if (ret)
> +		return ret;
> +
> +	pci_serr = ioremap(res.start, res.end - res.start + 1);

Why not use of_iomap(np, 1), then you don't need res.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-11 23:54 UTC (permalink / raw)
  To: Timur Tabi; +Cc: linuxppc-dev, Arnd Bergmann
In-Reply-To: <47B08C76.3000009@freescale.com>

On Mon, Feb 11, 2008 at 11:57:10AM -0600, Timur Tabi wrote:
> Arnd Bergmann wrote:
> 
> > Maybe we can introduce a more generic way of having conditional
> > device nodes in the tree that get knocked out in the boot wrapper.
> 
> I've been thinking about doing just this for quite some time now.  I've had a 
> few informal discussions without people about.
> 
> One idea is to allow attaching simple conditional expressions (like
> X is <, =, or > than Y) to a node.  It is the responsibility of the
> code that parses the device tree to assign values to X and Y.  For
> instance, they could be the names of U-Boot environment variables.
> If the expression is false, then the node is removed (or ignored)
> from the device tree.  If it's true, then it's kept in.

In the binary tree representation itself?  No way.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-11 23:56 UTC (permalink / raw)
  To: Timur Tabi, Arnd Bergmann, linuxppc-dev
In-Reply-To: <20080211235409.GB18348@localhost.localdomain>

On Tue, Feb 12, 2008 at 10:54:09AM +1100, David Gibson wrote:
> On Mon, Feb 11, 2008 at 11:57:10AM -0600, Timur Tabi wrote:
> > Arnd Bergmann wrote:
> > 
> > > Maybe we can introduce a more generic way of having conditional
> > > device nodes in the tree that get knocked out in the boot wrapper.
> > 
> > I've been thinking about doing just this for quite some time now.  I've had a 
> > few informal discussions without people about.
> > 
> > One idea is to allow attaching simple conditional expressions (like
> > X is <, =, or > than Y) to a node.  It is the responsibility of the
> > code that parses the device tree to assign values to X and Y.  For
> > instance, they could be the names of U-Boot environment variables.
> > If the expression is false, then the node is removed (or ignored)
> > from the device tree.  If it's true, then it's kept in.
> 
> In the binary tree representation itself?  No way.

Or to expand.  It's relatively easy now to just include multiple nodes
in the tree and either delete or nop some of them out conditionally
using libfdt.  But the conditional logic should be in the manipulating
agent (u-boot or bootwrapper or whatever), there's no way we're going
to require a conditional expression parser to interpret the device
tree blob itself.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-11 23:59 UTC (permalink / raw)
  To: Sean MacLennan; +Cc: LinuxPPC-dev
In-Reply-To: <47AFC5E3.20101@pikatech.com>

On Sun, Feb 10, 2008 at 10:49:55PM -0500, Sean MacLennan wrote:
> David Gibson wrote:
> > On Sun, Feb 10, 2008 at 09:40:19PM -0500, Sean MacLennan wrote:
> >   
> >> David Gibson wrote:
> >>     
> >>> This doesn't seem right.  warp_fixup_one_nor() changes only the
> >>> partition's offset, so you're not changing the size of any
> >>> partitions.  If you're not going to actually use any of the extra
> >>> flash space with 64M, I can't see why you'd bother moving around the
> >>> partitions you have.
> >>>   
> >>>       
> >> u-boot must be at the bottom of the flash. Also, for the 64M NOR flash 
> >> you can put everything in the NOR flash, I just don't show the 
> >> partitions. Booting from NOR is *much* faster than  booting from
> >> NAND.
> >>     
> >
> > Sorry, still not really following what's going on.  Without worrying
> > about the dts formatting or fixup code, can you summarise what the two
> > flash maps look like?
> >
> >   
> I guess what is confusing is that I am actually working with 3 flash 
> maps right now, although there will only be one map in the final version.
> 
> Map1:
> 
> NOR:
>   Kernel @ 0
>   Ramdisk
>   User
>   FPGA
>   Env
>   U-boot @ 63.5M
> 
> Map 2:
> 
> NOR:
>   FPGA
>   Env
>   U-boot @ 63.5M
> NAND:
>   Kernel @ 0
>   Ramdisk
>   User
> 
> Map 3:
>   Same as Map 2 only 4M NOR rather than 64M, so u-boot @ 3.5M.

But the partitions are all the same size, so in Map 2 there's a great
big gap between Env and U-boot?  Or there's a great big gap before
FPGA?

> The u-boot, env, and FPGA are anchored at the bottom of the flash. 
> Kernel is anchored at the top. Everything else goes in the middle.

Um.. so "bottom" actually means "high addresses" in the above?

> The FPGA partition contains the FPGA image. The user partition contains 
> a persistent JFFS2 file system. I don't use the user partition, so it 
> doesn't show up in the map I sent.
> 
> So map 1 was used until we got the NAND working. Map 2 is an interim 
> solution until we get the 4M flash. Map 3 is the final version.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: Sean MacLennan @ 2008-02-12  1:07 UTC (permalink / raw)
  To: LinuxPPC-dev
In-Reply-To: <20080211235958.GD18348@localhost.localdomain>

David Gibson wrote:
> But the partitions are all the same size, so in Map 2 there's a great
> big gap between Env and U-boot?  Or there's a great big gap before
> FPGA?
>   
There's a great big gap before the FPGA, 63M worth. Before we got the 
NAND working, we stored the kernel, the ramdisk image, and a persistent 
store there. But we moved everything to the NAND and are now going to a 
much smaller NOR chip.
>   
>> The u-boot, env, and FPGA are anchored at the bottom of the flash. 
>> Kernel is anchored at the top. Everything else goes in the middle.
>>     
>
> Um.. so "bottom" actually means "high addresses" in the above?
>   
Yes. Top = offset 0, bottom = size-of-flash.

And there is a bug in the initial code, I have to update the reg length 
field. I now have a Rev B board in my hands and tested that it works for 
both Rev A and Rev B.

Cheers,
   Sean

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-12  0:20 UTC (permalink / raw)
  To: Sean MacLennan; +Cc: LinuxPPC-dev
In-Reply-To: <47B0F142.40206@pikatech.com>

On Mon, Feb 11, 2008 at 08:07:14PM -0500, Sean MacLennan wrote:
> David Gibson wrote:
> > But the partitions are all the same size, so in Map 2 there's a great
> > big gap between Env and U-boot?  Or there's a great big gap before
> > FPGA?
> >   
> There's a great big gap before the FPGA, 63M worth. Before we got the 
> NAND working, we stored the kernel, the ramdisk image, and a persistent 
> store there. But we moved everything to the NAND and are now going to a 
> much smaller NOR chip.

Ok.

> >> The u-boot, env, and FPGA are anchored at the bottom of the flash. 
> >> Kernel is anchored at the top. Everything else goes in the middle.
> >>     
> >
> > Um.. so "bottom" actually means "high addresses" in the above?
> >   
> Yes. Top = offset 0, bottom = size-of-flash.

Um.. ok.  Not the way around I'd use, certainly...

> And there is a bug in the initial code, I have to update the reg length 
> field. 

Err.. now I'm doubly confused.  Initially I thought you'd need to
change the size part of reg somewhere, but your description above just
convinced me you didn't (because you were essentially just shifting a
4M map up into the high rather than low 4M of the 64M space).  Now
you're saying you do..

> I now have a Rev B board in my hands and tested that it works for 
> both Rev A and Rev B.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: Arnd Bergmann @ 2008-02-12  0:21 UTC (permalink / raw)
  To: Timur Tabi, linuxppc-dev
In-Reply-To: <20080211235652.GC18348@localhost.localdomain>

On Tuesday 12 February 2008, David Gibson wrote:
> Or to expand. =A0It's relatively easy now to just include multiple nodes
> in the tree and either delete or nop some of them out conditionally
> using libfdt. =A0But the conditional logic should be in the manipulating
> agent (u-boot or bootwrapper or whatever), there's no way we're going
> to require a conditional expression parser to interpret the device
> tree blob itself.

How about making the logic to nop out nodes a little more generic
without changes to the binary format?
E.g. you could have a "linux,conditional-node" property in the device
tree whose value is compared to a HW configuration specific string.
In Sean's example, you can have linux,conditional-node=3D"Rev.A" in
some nodes and linux,conditional-node=3D"Rev.B" in others, then
knock out all devices that have a non-matching linux,conditional-node
property, and finally remove the properties themselves before starting
the kernel.

	Arnd <><

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-12  0:36 UTC (permalink / raw)
  To: Arnd Bergmann; +Cc: linuxppc-dev, Timur Tabi
In-Reply-To: <200802120121.45349.arnd@arndb.de>

On Tue, Feb 12, 2008 at 01:21:44AM +0100, Arnd Bergmann wrote:
> On Tuesday 12 February 2008, David Gibson wrote:
> > Or to expand.  It's relatively easy now to just include multiple nodes
> > in the tree and either delete or nop some of them out conditionally
> > using libfdt.  But the conditional logic should be in the manipulating
> > agent (u-boot or bootwrapper or whatever), there's no way we're going
> > to require a conditional expression parser to interpret the device
> > tree blob itself.
> 
> How about making the logic to nop out nodes a little more generic
> without changes to the binary format?
> E.g. you could have a "linux,conditional-node" property in the device
> tree whose value is compared to a HW configuration specific string.
> In Sean's example, you can have linux,conditional-node="Rev.A" in
> some nodes and linux,conditional-node="Rev.B" in others, then
> knock out all devices that have a non-matching linux,conditional-node
> property, and finally remove the properties themselves before starting
> the kernel.

Well, that's basically a u-boot issue.  If they want to do their input
trees that way, and have helper functions that deal with it...

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: Sean MacLennan @ 2008-02-12  0:41 UTC (permalink / raw)
  To: LinuxPPC-dev
In-Reply-To: <20080212002030.GE18348@localhost.localdomain>

David Gibson wrote:
> Err.. now I'm doubly confused.  Initially I thought you'd need to
> change the size part of reg somewhere, but your description above just
> convinced me you didn't (because you were essentially just shifting a
> 4M map up into the high rather than low 4M of the 64M space).  Now
> you're saying you do..
>   
If you tell the mtd driver that the flash is 64M, when it is really 4M, 
it goes oops. So you do have to get the size right in the reg field.

Cheers,
   Sean

^ permalink raw reply

* Re: Could the DTS experts look at this?
From: David Gibson @ 2008-02-12  0:48 UTC (permalink / raw)
  To: Sean MacLennan; +Cc: LinuxPPC-dev
In-Reply-To: <47B0EB23.9040101@pikatech.com>

On Mon, Feb 11, 2008 at 07:41:07PM -0500, Sean MacLennan wrote:
> David Gibson wrote:
> > Err.. now I'm doubly confused.  Initially I thought you'd need to
> > change the size part of reg somewhere, but your description above just
> > convinced me you didn't (because you were essentially just shifting a
> > 4M map up into the high rather than low 4M of the 64M space).  Now
> > you're saying you do..
> >   
> If you tell the mtd driver that the flash is 64M, when it is really 4M, 
> it goes oops. So you do have to get the size right in the reg field.

Ah!  The top-level reg field, not the partitions.  Now I understand.

Except, since the 4M layout is the expected future norm, I would have
thought that's what you'd encode into the dts, and mangle it into the
64M version, rather than the other way around.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* libfdt: Add and use a node iteration helper function.
From: David Gibson @ 2008-02-12  0:58 UTC (permalink / raw)
  To: Jon Loeliger; +Cc: Scott Wood, linuxppc-dev

This patch adds an fdt_next_node() function which can be used to
iterate through nodes of the tree while keeping track of depth.  This
function is used to simplify the iteration code in a lot of other
functions, and is also exported for use by library users.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

---

I think we're ready to go with this one.  I'm still thinking about
suitable for_each_* macros, but in the mean time I'm happy with the
exported interface here, and it's a code-reducing patch.

Index: dtc/libfdt/fdt_ro.c
===================================================================
--- dtc.orig/libfdt/fdt_ro.c	2008-02-11 14:49:27.000000000 +1100
+++ dtc/libfdt/fdt_ro.c	2008-02-11 15:48:37.000000000 +1100
@@ -65,7 +65,7 @@
 static int nodename_eq(const void *fdt, int offset,
 		       const char *s, int len)
 {
-	const char *p = fdt_offset_ptr(fdt, offset, len+1);
+	const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
 
 	if (! p)
 		/* short match */
@@ -104,50 +104,24 @@ int fdt_num_mem_rsv(const void *fdt)
 	return i;
 }
 
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
 			       const char *name, int namelen)
 {
-	int level = 0;
-	uint32_t tag;
-	int offset, nextoffset;
+	int depth;
 
 	CHECK_HEADER(fdt);
 
-	tag = fdt_next_tag(fdt, parentoffset, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADOFFSET;
-
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_TRUNCATED;
-
-		case FDT_BEGIN_NODE:
-			level++;
-			if (level != 1)
-				continue;
-			if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen))
-				/* Found it! */
-				return offset;
-			break;
-
-		case FDT_END_NODE:
-			level--;
-			break;
-
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (level >= 0);
+	for (depth = 0;
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (depth < 0)
+			return -FDT_ERR_NOTFOUND;
+		else if ((depth == 1)
+			 && nodename_eq(fdt, offset, name, namelen))
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error */
 }
 
 int fdt_subnode_offset(const void *fdt, int parentoffset,
@@ -307,76 +281,61 @@ uint32_t fdt_get_phandle(const void *fdt
 
 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 {
-	uint32_t tag;
-	int p = 0, overflow = 0;
-	int offset, nextoffset, namelen;
+	int pdepth = 0, p = 0;
+	int offset, depth, namelen;
 	const char *name;
 
 	CHECK_HEADER(fdt);
 
-	tag = fdt_next_tag(fdt, 0, &nextoffset);
-	if (tag != FDT_BEGIN_NODE)
-		return -FDT_ERR_BADSTRUCTURE;
-
 	if (buflen < 2)
 		return -FDT_ERR_NOSPACE;
-	buf[0] = '/';
-	p = 1;
 
-	while (nextoffset <= nodeoffset) {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_BADOFFSET;
+	for (offset = 0, depth = 0;
+	     (offset >= 0) && (offset <= nodeoffset);
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (pdepth < depth)
+			continue; /* overflowed buffer */
 
-		case FDT_BEGIN_NODE:
-			name = fdt_get_name(fdt, offset, &namelen);
-			if (!name)
-				return namelen;
-			if (overflow || ((p + namelen + 1) > buflen)) {
-				overflow++;
-				break;
-			}
+		while (pdepth > depth) {
+			do {
+				p--;
+			} while (buf[p-1] != '/');
+			pdepth--;
+		}
+
+		name = fdt_get_name(fdt, offset, &namelen);
+		if (!name)
+			return namelen;
+		if ((p + namelen + 1) <= buflen) {
 			memcpy(buf + p, name, namelen);
 			p += namelen;
 			buf[p++] = '/';
-			break;
-
-		case FDT_END_NODE:
-			if (overflow) {
-				overflow--;
-				break;
-			}
-			do {
-				p--;
-			} while  (buf[p-1] != '/');
-			break;
+			pdepth++;
+		}
 
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
+		if (offset == nodeoffset) {
+			if (pdepth < (depth + 1))
+				return -FDT_ERR_NOSPACE;
 
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
+			if (p > 1) /* special case so that root path is "/", not "" */
+				p--;
+			buf[p] = '\0';
+			return p;
 		}
 	}
 
-	if (overflow)
-		return -FDT_ERR_NOSPACE;
+	if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+		return -FDT_ERR_BADOFFSET;
+	else if (offset == -FDT_ERR_BADOFFSET)
+		return -FDT_ERR_BADSTRUCTURE;
 
-	if (p > 1) /* special case so that root path is "/", not "" */
-		p--;
-	buf[p] = '\0';
-	return p;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
 				 int supernodedepth, int *nodedepth)
 {
-	int level = -1;
-	uint32_t tag;
-	int offset, nextoffset = 0;
+	int offset, depth;
 	int supernodeoffset = -FDT_ERR_INTERNAL;
 
 	CHECK_HEADER(fdt);
@@ -384,38 +343,29 @@ int fdt_supernode_atdepth_offset(const v
 	if (supernodedepth < 0)
 		return -FDT_ERR_NOTFOUND;
 
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-		switch (tag) {
-		case FDT_END:
-			return -FDT_ERR_BADOFFSET;
-
-		case FDT_BEGIN_NODE:
-			level++;
-			if (level == supernodedepth)
-				supernodeoffset = offset;
-			break;
-
-		case FDT_END_NODE:
-			level--;
-			break;
-
-		case FDT_PROP:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
+	for (offset = 0, depth = 0;
+	     (offset >= 0) && (offset <= nodeoffset);
+	     offset = fdt_next_node(fdt, offset, &depth)) {
+		if (depth == supernodedepth)
+			supernodeoffset = offset;
+
+		if (offset == nodeoffset) {
+			if (nodedepth)
+				*nodedepth = depth;
+
+			if (supernodedepth > depth)
+				return -FDT_ERR_NOTFOUND;
+			else
+				return supernodeoffset;
 		}
-	} while (offset < nodeoffset);
+	}
 
-	if (nodedepth)
-		*nodedepth = level;
+	if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+		return -FDT_ERR_BADOFFSET;
+	else if (offset == -FDT_ERR_BADOFFSET)
+		return -FDT_ERR_BADSTRUCTURE;
 
-	if (supernodedepth > level)
-		return -FDT_ERR_NOTFOUND;
-	return supernodeoffset;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_node_depth(const void *fdt, int nodeoffset)
@@ -443,51 +393,27 @@ int fdt_node_offset_by_prop_value(const 
 				  const char *propname,
 				  const void *propval, int proplen)
 {
-	uint32_t tag;
-	int offset, nextoffset;
+	int offset;
 	const void *val;
 	int len;
 
 	CHECK_HEADER(fdt);
 
-	if (startoffset >= 0) {
-		tag = fdt_next_tag(fdt, startoffset, &nextoffset);
-		if (tag != FDT_BEGIN_NODE)
-			return -FDT_ERR_BADOFFSET;
-	} else {
-		nextoffset = 0;
-	}
-
 	/* FIXME: The algorithm here is pretty horrible: we scan each
 	 * property of a node in fdt_getprop(), then if that didn't
 	 * find what we want, we scan over them again making our way
 	 * to the next node.  Still it's the easiest to implement
 	 * approach; performance can come later. */
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_BEGIN_NODE:
-			val = fdt_getprop(fdt, offset, propname, &len);
-			if (val
-			    && (len == proplen)
-			    && (memcmp(val, propval, len) == 0))
-				return offset;
-			break;
-
-		case FDT_PROP:
-		case FDT_END:
-		case FDT_END_NODE:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (tag != FDT_END);
+	for (offset = fdt_next_node(fdt, startoffset, NULL);
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		val = fdt_getprop(fdt, offset, propname, &len);
+		if (val && (len == proplen)
+		    && (memcmp(val, propval, len) == 0))
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error from fdt_next_node() */
 }
 
 int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
@@ -553,31 +479,15 @@ int fdt_node_offset_by_compatible(const 
 	 * that didn't find what we want, we scan over them again
 	 * making our way to the next node.  Still it's the easiest to
 	 * implement approach; performance can come later. */
-	do {
-		offset = nextoffset;
-		tag = fdt_next_tag(fdt, offset, &nextoffset);
-
-		switch (tag) {
-		case FDT_BEGIN_NODE:
-			err = fdt_node_check_compatible(fdt, offset,
-							compatible);
-			if ((err < 0)
-			    && (err != -FDT_ERR_NOTFOUND))
-				return err;
-			else if (err == 0)
-				return offset;
-			break;
-
-		case FDT_PROP:
-		case FDT_END:
-		case FDT_END_NODE:
-		case FDT_NOP:
-			break;
-
-		default:
-			return -FDT_ERR_BADSTRUCTURE;
-		}
-	} while (tag != FDT_END);
+	for (offset = fdt_next_node(fdt, startoffset, NULL);
+	     offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		err = fdt_node_check_compatible(fdt, offset, compatible);
+		if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+			return err;
+		else if (err == 0)
+			return offset;
+	}
 
-	return -FDT_ERR_NOTFOUND;
+	return offset; /* error from fdt_next_node() */
 }
Index: dtc/libfdt/fdt.c
===================================================================
--- dtc.orig/libfdt/fdt.c	2008-02-11 14:49:27.000000000 +1100
+++ dtc/libfdt/fdt.c	2008-02-11 15:48:02.000000000 +1100
@@ -129,6 +129,47 @@ uint32_t fdt_next_tag(const void *fdt, i
 	return tag;
 }
 
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+	int nextoffset = 0;
+	uint32_t tag;
+
+	if (offset >= 0) {
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+		if (tag != FDT_BEGIN_NODE)
+			return -FDT_ERR_BADOFFSET;
+	}
+
+	do {
+		offset = nextoffset;
+		tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+		switch (tag) {
+		case FDT_PROP:
+		case FDT_NOP:
+			break;
+
+		case FDT_BEGIN_NODE:
+			if (depth)
+				(*depth)++;
+			break;
+
+		case FDT_END_NODE:
+			if (depth)
+				(*depth)--;
+			break;
+
+		case FDT_END:
+			return -FDT_ERR_NOTFOUND;
+
+		default:
+			return -FDT_ERR_BADSTRUCTURE;
+		}
+	} while (tag != FDT_BEGIN_NODE);
+
+	return offset;
+}
+
 const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
 {
 	int len = strlen(s) + 1;
Index: dtc/libfdt/libfdt.h
===================================================================
--- dtc.orig/libfdt/libfdt.h	2008-02-11 14:49:27.000000000 +1100
+++ dtc/libfdt/libfdt.h	2008-02-12 11:44:06.000000000 +1100
@@ -131,6 +131,12 @@ static inline void *fdt_offset_ptr_w(voi
 uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
 
 /**********************************************************************/
+/* Traversal functions                                                */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**********************************************************************/
 /* General functions                                                  */
 /**********************************************************************/
 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

^ permalink raw reply

* Error while porting xenomai to power pc 750Cxe based SBC
From: rakesh bk @ 2008-02-12  3:47 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 2199 bytes --]

The results of your email command are provided below. Attached is your
original message.

- Results:
   Ignoring non-text/plain MIME parts

- Unprocessed:
   I am new to Xenomai , I have ported linux-2.6.14 to our custom board
based
   on IBM750Cxe Iam unable to boot my kernel cross compiled with eldk-3.0with
   enabled xenomai support.If i remove xenomai and ipipe support     the
kernel
   boots correctly , but if i enable i get the following oops message .
   The following patches are applied and arguements of scripts/prepare-
   kernel.sh is mentioned as follows
   adeos-ipipe-2.6.14-ppc-1.3-05.patch,
   Target architecture [default i686]: ppc
   Adeos patch[default linux-2.6.14/xenomai-2.2.0
   /ksrc/arch/powerpc/patches/adeos-ipipe-2.6.14-ppc64-1.2-03.patch]:
   adeos-ipipe-2.6.14-ppc-1.3-05.patch,
   The following is the config file of the kernel which is sent as an
   attachement
   Oops: kernel access of bad area, sig: 11 [#1]
   PREEMPT
   NIP: 00000000 LR: A0044AA0 SP: A05B1CA0 REGS: a05b1bf0 TRAP: 0400    Not
   tainted
   MSR: 40001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
   TASK = a05af770[1] 'swapper' THREAD: a05b0000
   Last syscall: 120
   GPR00: 00000000 A05B1CA0 A05AF770 00000020 A0356400 00000001 A0382650

- Ignored:
   00000003
   GPR08: A0350000 00000000 A0317C00 00000001 2410C024 B3012797 07FE2800
   00000001
   GPR16: 00000000 00000001 EA100000 007FFF00 00000000 A0350000 A0350000
   A0350000
   GPR24: A0350000 A05B0000 A05B0000 A0382650 A079E480 00000020 A05B0000
   A0356400
   NIP [00000000] 0x0
   LR [a0044aa0] __do_IRQ+0x124/0x228
   Call trace:
    [a000f8e8] __ipipe_do_IRQ+0x20/0x34
    [a00469a8] __ipipe_sync_stage+0x204/0x208
    [a0046158] __ipipe_walk_pipeline+0xc8/0xd4
    [a000f6e4] __ipipe_handle_irq+0x94/0x1e4
    [a000f86c] __ipipe_grab_irq+0x38/0x94
    [a0005150] __ipipe_ret_from_except+0x0/0xc
    [00000020] 0x20
    [a01db8a8] mdio_read+0x24/0x38
    [a01db340] check_phy_state+0x34/0x19c
    [a01dc688] gt64260_eth_open+0x420/0x46c
    [a0227e14] dev_open+0xb8/0xd8
    [a0229d50] dev_change_flags+0x6c/0x158
    [a0379458] ic_open_devs+0x1e8/0x2fc
    [a037aa18] ip_auto_config+0x74/0x2e0
    [a035c738] do_initcalls+0x60/0xfc

[-- Attachment #2: Type: text/html, Size: 2987 bytes --]

^ permalink raw reply

* [PATCH 0/8] pseries: phyp dump: hypervisor-assisted dump
From: Manish Ahuja @ 2008-02-12  6:31 UTC (permalink / raw)
  To: linuxppc-dev; +Cc: mahuja, linasvepstas, lkessler, strosake
In-Reply-To: <4782B985.2090508@austin.ibm.com>


The following series of patches implement a basic framework
for hypervisor-assisted dump. The very first patch provides 
documentation explaining what this is :-). Yes, its supposed
to be an improvement over kdump.

A list of open issues / todo list is included in the documentation.
It also appears that the not-yet-released firmware versions this was tested 
on are still, ahem, incomplete; this work is also pending.

I have included most of the changes requested. Although, I did find
one or two, fixed in a later patch file rather than the first location
they appeared at.

Also it now does not block any memory on machines other than power6 boxes
which have the requisite firmware. This is from a power5 box.

from jal-lp6 a power5 machine.
.........
Phyp-dump not supported on this hardware
Using pSeries machine description
console [udbg-1] enabled
.......

Since I changed a few more things, I am reposting all the patches.

-- Manish & Linas.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

^ permalink raw reply

* [PATCH 1/8] pseries: phyp dump: Docmentation
From: Manish Ahuja @ 2008-02-12  6:53 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: Manish Ahuja
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>

Basic documentation for hypervisor-assisted dump.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>

----
 Documentation/powerpc/phyp-assisted-dump.txt |  127 +++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

Index: 2.6.24-rc5/Documentation/powerpc/phyp-assisted-dump.txt
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ 2.6.24-rc5/Documentation/powerpc/phyp-assisted-dump.txt	2008-02-12 06:38:25.000000000 -0600
@@ -0,0 +1,127 @@
+
+                   Hypervisor-Assisted Dump
+                   ------------------------
+                       November 2007
+
+The goal of hypervisor-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+As compared to kdump or other strategies, hypervisor-assisted
+dump offers several strong, practical advantages:
+
+-- Unlike kdump, the system has been reset, and loaded
+   with a fresh copy of the kernel.  In particular,
+   PCI and I/O devices have been reinitialized and are
+   in a clean, consistent state.
+-- As the dump is performed, the dumped memory becomes
+   immediately available to the system for normal use.
+-- After the dump is completed, no further reboots are
+   required; the system will be fully usable, and running
+   in it's normal, production mode on it normal kernel.
+
+The above can only be accomplished by coordination with,
+and assistance from the hypervisor. The procedure is
+as follows:
+
+-- When a system crashes, the hypervisor will save
+   the low 256MB of RAM to a previously registered
+   save region. It will also save system state, system
+   registers, and hardware PTE's.
+
+-- After the low 256MB area has been saved, the
+   hypervisor will reset PCI and other hardware state.
+   It will *not* clear RAM. It will then launch the
+   bootloader, as normal.
+
+-- The freshly booted kernel will notice that there
+   is a new node (ibm,dump-kernel) in the device tree,
+   indicating that there is crash data available from
+   a previous boot. It will boot into only 256MB of RAM,
+   reserving the rest of system memory.
+
+-- Userspace tools will parse /sys/kernel/release_region
+   and read /proc/vmcore to obtain the contents of memory,
+   which holds the previous crashed kernel. The userspace
+   tools may copy this info to disk, or network, nas, san,
+   iscsi, etc. as desired.
+
+   For Example: the values in /sys/kernel/release-region
+   would look something like this (address-range pairs).
+   CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
+   DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
+
+-- As the userspace tools complete saving a portion of
+   dump, they echo an offset and size to
+   /sys/kernel/release_region to release the reserved
+   memory back to general use.
+
+   An example of this is:
+     "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+   which will release 256MB at the 1GB boundary.
+
+Please note that the hypervisor-assisted dump feature
+is only available on Power6-based systems with recent
+firmware versions.
+
+Implementation details:
+----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on this particular machine. If it does, then
+we check to see if a active dump is waiting for us. If yes
+then everything but 256 MB of RAM is reserved during early
+boot. This area is released once we collect a dump from user
+land scripts that are run. If there is dump data, then
+the /sys/kernel/release_region file is created, and
+the reserved memory is held.
+
+If there is no waiting dump data, then only the highest
+256MB of the ram is reserved as a scratch area. This area
+is *not* be released: this region will be kept permanently
+reserved, so that it can act as a receptacle for a copy
+of the low 256MB in the case a crash does occur. See,
+however, "open issues" below, as to whether
+such a reserved region is really needed.
+
+Currently the dump will be copied from /proc/vmcore to a
+a new file upon user intervention. The starting address
+to be read and the range for each data point in provided
+in /sys/kernel/release_region.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+General notes:
+--------------
+Security: please note that there are potential security issues
+with any sort of dump mechanism. In particular, plaintext
+(unencrypted) data, and possibly passwords, may be present in
+the dump data. Userspace tools must take adequate precautions to
+preserve security.
+
+Open issues/ToDo:
+------------
+ o The various code paths that tell the hypervisor that a crash
+   occurred, vs. it simply being a normal reboot, should be
+   reviewed, and possibly clarified/fixed.
+
+ o Instead of using /sys/kernel, should there be a /sys/dump
+   instead? There is a dump_subsys being created by the s390 code,
+   perhaps the pseries code should use a similar layout as well.
+
+ o Is reserving a 256MB region really required? The goal of
+   reserving a 256MB scratch area is to make sure that no
+   important crash data is clobbered when the hypervisor
+   save low mem to the scratch area. But, if one could assure
+   that nothing important is located in some 256MB area, then
+   it would not need to be reserved. Something that can be
+   improved in subsequent versions.
+
+ o Still working the kdump team to integrate this with kdump,
+   some work remains but this would not affect the current
+   patches.
+
+ o Still need to write a shell script, to copy the dump away.
+   Currently I am parsing it manually.

^ permalink raw reply

* [PATCH 2/8] pseries: phyp dump: reserve-release proof-of-concept
From: Manish Ahuja @ 2008-02-12  7:08 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Initial patch for reserving memory in early boot, and freeing it later.
If the previous boot had ended with a crash, the reserved memory would contain
a copy of the crashed kernel data.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/kernel/prom.c                 |   50 ++++++++++++++++++++
 arch/powerpc/kernel/rtas.c                 |   32 +++++++++++++
 arch/powerpc/platforms/pseries/Makefile    |    1 
 arch/powerpc/platforms/pseries/phyp_dump.c |   71 +++++++++++++++++++++++++++++
 include/asm-powerpc/phyp_dump.h            |   38 +++++++++++++++
 include/asm/rtas.h                         |    3 +
 6 files changed, 195 insertions(+)

Index: 2.6.24-rc5/include/asm-powerpc/phyp_dump.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ 2.6.24-rc5/include/asm-powerpc/phyp_dump.h	2008-02-12 06:12:37.000000000 -0600
@@ -0,0 +1,38 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2007
+ * Copyright (c) 2007 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END   (1UL<<28)
+
+struct phyp_dump {
+	/* Memory that is reserved during very early boot. */
+	unsigned long init_reserve_start;
+	unsigned long init_reserve_size;
+	/* Check status during boot if dump supported, active & present*/
+	unsigned long phyp_dump_configured;
+	unsigned long phyp_dump_is_active;
+	/* store cpu & hpte size */
+	unsigned long cpu_state_size;
+	unsigned long hpte_region_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:12:37.000000000 -0600
@@ -0,0 +1,71 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2007
+ * Copyrhgit (c) 2007 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+
+/* Global, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_global;
+struct phyp_dump *phyp_dump_info = &phyp_dump_global;
+
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void
+release_memory_range(unsigned long start_pfn, unsigned long nr_pages)
+{
+	struct page *rpage;
+	unsigned long end_pfn;
+	long i;
+
+	end_pfn = start_pfn + nr_pages;
+
+	for (i=start_pfn; i <= end_pfn; i++) {
+		rpage = pfn_to_page(i);
+		if (PageReserved(rpage)) {
+			ClearPageReserved(rpage);
+			init_page_count(rpage);
+			__free_page(rpage);
+			totalram_pages++;
+		}
+	}
+}
+
+static int __init phyp_dump_setup(void)
+{
+	unsigned long start_pfn, nr_pages;
+
+	/* If no memory was reserved in early boot, there is nothing to do */
+	if (phyp_dump_info->init_reserve_size == 0)
+		return 0;
+
+	/* Release memory that was reserved in early boot */
+	start_pfn = PFN_DOWN(phyp_dump_info->init_reserve_start);
+	nr_pages = PFN_DOWN(phyp_dump_info->init_reserve_size);
+	release_memory_range(start_pfn, nr_pages);
+
+	return 0;
+}
+
+subsys_initcall(phyp_dump_setup);
Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/Makefile
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/Makefile	2008-02-12 06:12:10.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/Makefile	2008-02-12 06:12:37.000000000 -0600
@@ -18,3 +18,4 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
Index: 2.6.24-rc5/arch/powerpc/kernel/prom.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/kernel/prom.c	2008-02-12 06:12:10.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/kernel/prom.c	2008-02-12 06:12:37.000000000 -0600
@@ -51,6 +51,7 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
 #include <asm/kexec.h>
 
 #ifdef DEBUG
@@ -1011,6 +1012,52 @@ static void __init early_reserve_mem(voi
 #endif
 }
 
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * reserve_crashed_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init reserve_crashed_mem(void)
+{
+	unsigned long base, size;
+	if (!phyp_dump_info->phyp_dump_configured) {
+		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+		return;
+	}
+
+	if (phyp_dump_info->phyp_dump_is_active) {
+		/* Reserve *everything* above RMR.Area freed by userland tools*/
+		base = PHYP_DUMP_RMR_END;
+		size = lmb_end_of_DRAM() - base;
+
+		/* XXX crashed_ram_end is wrong, since it may be beyond
+	 	* the memory_limit, it will need to be adjusted. */
+		lmb_reserve(base, size);
+
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	}
+	else {
+		size = phyp_dump_info->cpu_state_size +
+			phyp_dump_info->hpte_region_size +
+			PHYP_DUMP_RMR_END;
+		base = lmb_end_of_DRAM() - size;
+		lmb_reserve(base, size);
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	}
+}
+#else
+static inline void __init reserve_crashed_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP */
+
+
 void __init early_init_devtree(void *params)
 {
 	DBG(" -> early_init_devtree(%p)\n", params);
@@ -1022,6 +1069,8 @@ void __init early_init_devtree(void *par
 	/* Some machines might need RTAS info for debugging, grab it now. */
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 #endif
+	/* scan tree to see if dump occured during last boot */
+	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
 
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
@@ -1043,6 +1092,7 @@ void __init early_init_devtree(void *par
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
+	reserve_crashed_mem();
 
 	lmb_enforce_memory_limit(memory_limit);
 	lmb_analyze();
Index: 2.6.24-rc5/arch/powerpc/kernel/rtas.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/kernel/rtas.c	2008-02-12 06:12:10.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/kernel/rtas.c	2008-02-12 06:12:37.000000000 -0600
@@ -39,6 +39,7 @@
 #include <asm/syscalls.h>
 #include <asm/smp.h>
 #include <asm/atomic.h>
+#include <asm/phyp_dump.h>
 
 struct rtas_t rtas = {
 	.lock = SPIN_LOCK_UNLOCKED
@@ -883,6 +884,37 @@ void __init rtas_initialize(void)
 #endif
 }
 
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+#ifdef CONFIG_PHYP_DUMP
+	const unsigned int *sizes;
+
+	phyp_dump_info->phyp_dump_configured = 0;
+	phyp_dump_info->phyp_dump_is_active = 0;
+
+	if (depth != 1 || strcmp(uname, "rtas") != 0)
+		return 0;
+
+	if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+		phyp_dump_info->phyp_dump_configured++;
+
+	if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+		phyp_dump_info->phyp_dump_is_active++;
+
+	sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes", NULL);
+	if (!sizes)
+		return 0;
+
+	if (sizes[0] == 1)
+		phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+	if (sizes[3] == 2)
+		phyp_dump_info->hpte_region_size = *((unsigned long *)&sizes[4]);
+#endif
+	return 1;
+}
+
 int __init early_init_dt_scan_rtas(unsigned long node,
 		const char *uname, int depth, void *data)
 {
Index: 2.6.24-rc5/include/asm/rtas.h
===================================================================
--- 2.6.24-rc5.orig/include/asm/rtas.h	2008-02-12 06:12:10.000000000 -0600
+++ 2.6.24-rc5/include/asm/rtas.h	2008-02-12 06:12:37.000000000 -0600
@@ -183,6 +183,9 @@ extern unsigned int rtas_busy_delay(int 
 
 extern int early_init_dt_scan_rtas(unsigned long node,
 		const char *uname, int depth, void *data);
+int early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data);
+
 
 extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
 

^ permalink raw reply

* [BUG] 2.6.25-rc1-git1 softlockup while bootup on powerpc
From: Kamalesh Babulal @ 2008-02-12  7:09 UTC (permalink / raw)
  To: LKML, linuxppc-dev, Ingo Molnar, Dhaval Giani, Srivatsa Vaddagiri,
	Andy Whitcroft, Balbir Singh

[-- Attachment #1: Type: text/plain, Size: 8166 bytes --]

Hi,

While booting with the 2.6.25-rc1-git1 kernel on the powerbox
the softlockup is seen, with following trace. 

insmod used greatest stack depth: 5568 bytes left
Loading st.ko module
BUG: soft lockup - CPU#1 stuck for 61s! [insmod:377]
NIP: c0000000001b172c LR: c0000000001a6f00 CTR: 0000000000000034
REGS: c00000077cb2b8a0 TRAP: 0901   Not tainted  (2.6.25-rc1-git1-autotest)
MSR: 8000000000009032 <EE,ME,IR,DR>  CR: 84004084  XER: 20000000
TASK = c00000077cb2f0e0[377] 'insmod' THREAD: c00000077cb28000 CPU: 1
GPR00: c00000077e1a0460 c00000077cb2bb20 c00000000053ba08 0000000000000002 
GPR04: f000000000000000 c00000077c880240 000000000000003c 000000000000000b 
GPR08: 1000000000000000 c00000077e1a0708 0000000000000002 000000000000000c 
GPR12: c00000077e1a0690 c000000000484d00 
NIP [c0000000001b172c] .radix_tree_gang_lookup+0xdc/0x1e4
LR [c0000000001a6f00] .call_for_each_cic+0x50/0x10c
Call Trace:
[c00000077cb2bb20] [c0000000001a6f60] .call_for_each_cic+0xb0/0x10c (unreliable)
[c00000077cb2bc60] [c00000000019ecd8] .exit_io_context+0xf0/0x110
[c00000077cb2bcf0] [c00000000006254c] .do_exit+0x820/0x850
[c00000077cb2bda0] [c000000000062648] .do_group_exit+0xcc/0xe8
[c00000077cb2be30] [c00000000000872c] syscall_exit+0x0/0x40
Instruction dump:
4800007c 7cc007b4 7ca90436 7f680036 792b06a0 7c8800d0 79691f24 200b0040 
7c0903a6 7d296214 39290018 e8090000 <7caa2038> 39290008 2fa00000 409e0018 
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:30:10 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:32:19 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:34:28 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:36:37 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:38:46 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:40:54 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40
-- 0:conmux-control -- time-stamp -- Feb/11/08 14:43:04 --
INFO: task insmod:385 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
insmod        D 000000001000e144 12144   385      1
Call Trace:
[c00000077cb97600] [c0000000008fc600] 0xc0000000008fc600 (unreliable)
[c00000077cb977d0] [c000000000010c7c] .__switch_to+0x11c/0x154
[c00000077cb97860] [c0000000003455e0] .schedule+0x5d0/0x6b0
[c00000077cb97950] [c000000000345920] .schedule_timeout+0x3c/0xe8
[c00000077cb97a20] [c000000000344e7c] .wait_for_common+0x150/0x22c
[c00000077cb97ae0] [c00000000008f5ac] .__stop_machine_run+0xbc/0xf0
[c00000077cb97bb0] [c00000000008f61c] .stop_machine_run+0x3c/0x80
[c00000077cb97c50] [c00000000008989c] .sys_init_module+0x14e4/0x1af4
[c00000077cb97e30] [c00000000000872c] syscall_exit+0x0/0x40



-- 
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

[-- Attachment #2: config.orig.new --]
[-- Type: text/plain, Size: 57077 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc1-git1
# Mon Feb 11 17:15:07 2008
#
CONFIG_PPC64=y

#
# Processor support
#
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SCANLOG=y
CONFIG_LPARCFG=y
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC5121 is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set

#
# Kernel options
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_PM is not set
CONFIG_SECCOMP=y
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_RPA=y
CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
CONFIG_KERNEL_START=0xc000000000000000

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_OF_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
# CONFIG_ADB_PMU_LED is not set
# CONFIG_PMAC_SMU is not set
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_THERM_PM72=m
# CONFIG_WINDFARM is not set
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
CONFIG_IBMVETH=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVCS=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=m
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WATCHDOG_RTAS is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# ALSA PowerMac devices
#
# CONFIG_SND_POWERMAC is not set

#
# ALSA PowerPC devices
#

#
# Apple Onboard Audio driver
#
# CONFIG_SND_AOA is not set
# CONFIG_SND_AOA_SOUNDBUS is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
# CONFIG_USB_XUSBATM is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_HCALL_STATS is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set

^ permalink raw reply

* [PATCH 3/8] pseries: phyp dump: use sysfs to release reserved mem
From: Manish Ahuja @ 2008-02-12  7:11 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Check to see if there actually is data from a previously
crashed kernel waiting. If so, Allow user-space tools to
grab the data (by reading /proc/kcore). When user-space 
finishes dumping a section, it must release that memory
by writing to sysfs. For example,

  echo "0x40000000 0x10000000" > /sys/kernel/release_region

will release 256MB starting at the 1GB.  The released memory
becomes free for general use.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

------
 arch/powerpc/platforms/pseries/phyp_dump.c |   88 +++++++++++++++++++++++++++--
 1 file changed, 82 insertions(+), 6 deletions(-)

Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:12:37.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:12:55.000000000 -0600
@@ -12,17 +12,24 @@
  */
 
 #include <linux/init.h>
+#include <linux/kobject.h>
 #include <linux/mm.h>
+#include <linux/of.h>
 #include <linux/pfn.h>
 #include <linux/swap.h>
+#include <linux/sysfs.h>
 
 #include <asm/page.h>
 #include <asm/phyp_dump.h>
+#include <asm/rtas.h>
 
 /* Global, used to communicate data between early boot and late boot */
 static struct phyp_dump phyp_dump_global;
 struct phyp_dump *phyp_dump_info = &phyp_dump_global;
 
+static int ibm_configure_kernel_dump;
+
+/* ------------------------------------------------- */
 /**
  * release_memory_range -- release memory previously lmb_reserved
  * @start_pfn: starting physical frame number
@@ -52,20 +59,89 @@ release_memory_range(unsigned long start
 	}
 }
 
-static int __init phyp_dump_setup(void)
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ *   "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ *   "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t
+store_release_region(struct kset *kset, const char *buf, size_t count)
 {
+	unsigned long start_addr, length, end_addr;
 	unsigned long start_pfn, nr_pages;
+	ssize_t ret;
+
+	ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Range-check - don't free any reserved memory that
+	 * wasn't reserved for phyp-dump */
+	if (start_addr < phyp_dump_info->init_reserve_start)
+		start_addr = phyp_dump_info->init_reserve_start;
+
+	end_addr = phyp_dump_info->init_reserve_start +
+			phyp_dump_info->init_reserve_size;
+	if (start_addr+length > end_addr)
+		length = end_addr - start_addr;
+
+	/* Release the region of memory assed in by user */
+	start_pfn = PFN_DOWN(start_addr);
+	nr_pages = PFN_DOWN(length);
+	release_memory_range (start_pfn, nr_pages);
+
+	return count;
+}
+
+static ssize_t
+show_release_region(struct kset * kset, char *buf)
+{
+	return sprintf(buf, "ola\n");
+}
+
+static struct subsys_attribute rr = __ATTR(release_region, 0600,
+					 show_release_region,
+					 store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+	struct device_node *rtas;
+	const int *dump_header;
+	int header_len = 0;
+	int rc;
 
 	/* If no memory was reserved in early boot, there is nothing to do */
 	if (phyp_dump_info->init_reserve_size == 0)
 		return 0;
 
-	/* Release memory that was reserved in early boot */
-	start_pfn = PFN_DOWN(phyp_dump_info->init_reserve_start);
-	nr_pages = PFN_DOWN(phyp_dump_info->init_reserve_size);
-	release_memory_range(start_pfn, nr_pages);
+	/* Return if phyp dump not supported */
+	if (!phyp_dump_info->phyp_dump_configured) {
+		return -ENOSYS;
+	}
+
+	/* Is there dump data waiting for us? */
+	rtas = of_find_node_by_path("/rtas");
+	dump_header = of_get_property(rtas, "ibm,kernel-dump", &header_len);
+	if (dump_header == NULL) {
+		release_all();
+		return 0;
+	}
+
+	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+	rc = subsys_create_file(&kernel_subsys, &rr);
+	if (rc) {
+		printk (KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", rc);
+		release_all();
+		return 0;
+	}
 
 	return 0;
 }
-
 subsys_initcall(phyp_dump_setup);

^ permalink raw reply

* [PATCH 4/8] pseries: phyp dump: register dump area.
From: Manish Ahuja @ 2008-02-12  7:14 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Set up the actual dump header, register it with the hypervisor.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

------
 arch/powerpc/platforms/pseries/phyp_dump.c |  136 +++++++++++++++++++++++++++--
 1 file changed, 129 insertions(+), 7 deletions(-)

Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:12:55.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:01.000000000 -0600
@@ -30,6 +30,117 @@ struct phyp_dump *phyp_dump_info = &phyp
 static int ibm_configure_kernel_dump;
 
 /* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+	u32 dump_flags;
+	u16 source_type;
+	u16 error_flags;
+	u64 source_address;
+	u64 source_length;
+	u64 length_copied;
+	u64 destination_address;
+};
+
+struct phyp_dump_header {
+	u32 version;
+	u16 num_of_sections;
+	u16 status;
+
+	u32 first_offset_section;
+	u32 dump_disk_section;
+	u64 block_num_dd;
+	u64 num_of_blocks_dd;
+	u32 offset_dd;
+	u32 maxtime_to_auto;
+	/* No dump disk path string used */
+
+	struct dump_section cpu_data;
+	struct dump_section hpte_data;
+	struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS 3
+#define DUMP_HEADER_VERSION 0x1
+#define DUMP_REQUEST_FLAG 0x1
+#define DUMP_SOURCE_CPU 0x0001
+#define DUMP_SOURCE_HPTE 0x0002
+#define DUMP_SOURCE_RMO  0x0011
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+	unsigned long addr_offset = 0;
+
+	/* Set up the dump header */
+	ph->version = DUMP_HEADER_VERSION;
+	ph->num_of_sections = NUM_DUMP_SECTIONS;
+	ph->status = 0;
+
+	ph->first_offset_section =
+		(u32)offsetof(struct phyp_dump_header, cpu_data);
+	ph->dump_disk_section = 0;
+	ph->block_num_dd = 0;
+	ph->num_of_blocks_dd = 0;
+	ph->offset_dd = 0;
+
+	ph->maxtime_to_auto = 0; /* disabled */
+
+	/* The first two sections are mandatory */
+	ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+	ph->cpu_data.source_address = 0;
+	ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+	ph->cpu_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->cpu_state_size;
+
+	ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+	ph->hpte_data.source_address = 0;
+	ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+	ph->hpte_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->hpte_region_size;
+
+	/* This section describes the low kernel region */
+	ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+	ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+	ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+	ph->kernel_data.destination_address = addr_offset;
+	addr_offset += ph->kernel_data.source_length;
+
+	return addr_offset;
+}
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+	ph->cpu_data.destination_address += addr;
+	ph->hpte_data.destination_address += addr;
+	ph->kernel_data.destination_address += addr;
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+		               1, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc)
+	{
+		printk (KERN_ERR "phyp-dump: unexpected error (%d) on register\n", rc);
+	}
+}
+
+/* ------------------------------------------------- */
 /**
  * release_memory_range -- release memory previously lmb_reserved
  * @start_pfn: starting physical frame number
@@ -113,7 +224,9 @@ static struct subsys_attribute rr = __AT
 static int __init phyp_dump_setup(void)
 {
 	struct device_node *rtas;
-	const int *dump_header;
+	const struct phyp_dump_header *dump_header;
+	unsigned long dump_area_start;
+	unsigned long dump_area_length;
 	int header_len = 0;
 	int rc;
 
@@ -126,22 +239,31 @@ static int __init phyp_dump_setup(void)
 		return -ENOSYS;
 	}
 
-	/* Is there dump data waiting for us? */
+	/* Is there dump data waiting for us? If there isn't,
+	 * then register a new dump area, and release all of
+	 * the rest of the reserved ram.
+	 *
+	 * The /rtas/ibm,kernel-dump rtas node is present only
+	 * if there is dump data waiting for us.
+	 */
 	rtas = of_find_node_by_path("/rtas");
 	dump_header = of_get_property(rtas, "ibm,kernel-dump", &header_len);
+	of_node_put(rtas);
+
+	dump_area_length = init_dump_header(&phdr);
+	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK; /* align down */
+
 	if (dump_header == NULL) {
-		release_all();
+		register_dump_area(&phdr, dump_area_start);
 		return 0;
 	}
 
 	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
 	rc = subsys_create_file(&kernel_subsys, &rr);
-	if (rc) {
+	if (rc)
 		printk (KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", rc);
-		release_all();
-		return 0;
-	}
 
+	/* ToDo: re-register the dump area, for next time. */
 	return 0;
 }
 subsys_initcall(phyp_dump_setup);

^ permalink raw reply

* [PATCH 5/8] pseries: phyp dump: debugging print routines.
From: Manish Ahuja @ 2008-02-12  7:16 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Provide some basic debugging support.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepsts <linas@austin.ibm.com>
-----

 arch/powerpc/platforms/pseries/phyp_dump.c |   64 +++++++++++++++++++++++++++--
 1 file changed, 60 insertions(+), 4 deletions(-)

Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:01.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:06.000000000 -0600
@@ -2,7 +2,7 @@
  * Hypervisor-assisted dump
  *
  * Linas Vepstas, Manish Ahuja 2007
- * Copyrhgit (c) 2007 IBM Corp.
+ * Copyright (c) 2007 IBM Corp.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -122,6 +122,61 @@ static unsigned long init_dump_header(st
 	return addr_offset;
 }
 
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+	printk(KERN_INFO "dump header:\n");
+	/* setup some ph->sections required */
+	printk(KERN_INFO "version = %d\n", ph->version);
+	printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+	printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+	/* No ph->disk, so all should be set to 0 */
+	printk(KERN_INFO "Offset to first section 0x%x\n",
+						ph->first_offset_section);
+	printk(KERN_INFO "dump disk sections should be zero\n");
+	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+	/*set cpu state and hpte states as well scratch pad area */
+	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+	printk(KERN_INFO "cpu source_address =%lx\n",
+						ph->cpu_data.source_address);
+	printk(KERN_INFO "cpu source_length =%lx\n",
+						ph->cpu_data.source_length);
+	printk(KERN_INFO "cpu length_copied =%lx\n",
+						ph->cpu_data.length_copied);
+
+	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+	printk(KERN_INFO "HPTE source_address =%lx\n",
+						ph->hpte_data.source_address);
+	printk(KERN_INFO "HPTE source_length =%lx\n",
+						ph->hpte_data.source_length);
+	printk(KERN_INFO "HPTE length_copied =%lx\n",
+						ph->hpte_data.length_copied);
+
+	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+	printk(KERN_INFO "SRSD source_address =%lx\n",
+						ph->kernel_data.source_address);
+	printk(KERN_INFO "SRSD source_length =%lx\n",
+						ph->kernel_data.source_length);
+	printk(KERN_INFO "SRSD length_copied =%lx\n",
+						ph->kernel_data.length_copied);
+#endif
+}
+
 static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
 {
 	int rc;
@@ -134,9 +189,9 @@ static void register_dump_area(struct ph
 		               1, ph, sizeof(struct phyp_dump_header));
 	} while (rtas_busy_delay(rc));
 
-	if (rc)
-	{
-		printk (KERN_ERR "phyp-dump: unexpected error (%d) on register\n", rc);
+	if (rc) {
+		printk(KERN_ERR "phyp-dump: unexpected error (%d) on register\n", rc);
+		print_dump_header(ph);
 	}
 }
 
@@ -238,6 +293,7 @@ static int __init phyp_dump_setup(void)
 	if (!phyp_dump_info->phyp_dump_configured) {
 		return -ENOSYS;
 	}
+	print_dump_header(dump_header);
 
 	/* Is there dump data waiting for us? If there isn't,
 	 * then register a new dump area, and release all of

^ permalink raw reply

* [PATCH 6/8] pseries: phyp dump: Invalidate and print dump areas.
From: Manish Ahuja @ 2008-02-12  7:18 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Routines to 
a. invalidate dump 
b. Calculate region that is reserved and needs to be freed. This is 
   exported through sysfs interface.

Unregister has been removed for now as it wasn't being used.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
-----

---
 arch/powerpc/platforms/pseries/phyp_dump.c |   85 +++++++++++++++++++++++++----
 include/asm/phyp_dump.h                    |    6 +-
 2 files changed, 79 insertions(+), 12 deletions(-)

Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:06.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:17.000000000 -0600
@@ -69,6 +69,10 @@ static struct phyp_dump_header phdr;
 #define DUMP_SOURCE_CPU 0x0001
 #define DUMP_SOURCE_HPTE 0x0002
 #define DUMP_SOURCE_RMO  0x0011
+#define DUMP_ERROR_FLAG 0x2000
+#define DUMP_TRIGGERED 0x4000
+#define DUMP_PERFORMED 0x8000
+
 
 /**
  * init_dump_header() - initialize the header declaring a dump
@@ -180,9 +184,15 @@ static void print_dump_header(const stru
 static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
 {
 	int rc;
-	ph->cpu_data.destination_address += addr;
-	ph->hpte_data.destination_address += addr;
-	ph->kernel_data.destination_address += addr;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	/* ToDo Invalidate kdump and free memory range. */
 
 	do {
 		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
@@ -195,6 +205,30 @@ static void register_dump_area(struct ph
 	}
 }
 
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+		               2, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc) {
+		printk (KERN_ERR "phyp-dump: unexpected error (%d) "
+						"on invalidate\n", rc);
+		print_dump_header(ph);
+	}
+}
+
 /* ------------------------------------------------- */
 /**
  * release_memory_range -- release memory previously lmb_reserved
@@ -205,8 +239,8 @@ static void register_dump_area(struct ph
  * lmb_reserved in early boot. The released memory becomes
  * available for genreal use.
  */
-static void
-release_memory_range(unsigned long start_pfn, unsigned long nr_pages)
+static
+void release_memory_range(unsigned long start_pfn, unsigned long nr_pages)
 {
 	struct page *rpage;
 	unsigned long end_pfn;
@@ -237,8 +271,8 @@ release_memory_range(unsigned long start
  *
  * will release 256MB starting at 1GB.
  */
-static ssize_t
-store_release_region(struct kset *kset, const char *buf, size_t count)
+static
+ssize_t store_release_region(struct kset *kset, const char *buf, size_t count)
 {
 	unsigned long start_addr, length, end_addr;
 	unsigned long start_pfn, nr_pages;
@@ -266,10 +300,23 @@ store_release_region(struct kset *kset, 
 	return count;
 }
 
-static ssize_t
-show_release_region(struct kset * kset, char *buf)
+static ssize_t show_release_region(struct kset * kset, char *buf)
 {
-	return sprintf(buf, "ola\n");
+	u64 second_addr_range;
+
+	/* total reserved size - start of scratch area */
+	second_addr_range = phyp_dump_info->init_reserve_size -
+				phyp_dump_info->reserved_scratch_size;
+	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+		phdr.cpu_data.destination_address,
+		phdr.cpu_data.length_copied,
+		phdr.hpte_data.destination_address,
+		phdr.hpte_data.length_copied,
+		phdr.kernel_data.destination_address,
+		phdr.kernel_data.length_copied,
+		phyp_dump_info->init_reserve_start,
+		second_addr_range);
 }
 
 static struct subsys_attribute rr = __ATTR(release_region, 0600,
@@ -293,7 +340,6 @@ static int __init phyp_dump_setup(void)
 	if (!phyp_dump_info->phyp_dump_configured) {
 		return -ENOSYS;
 	}
-	print_dump_header(dump_header);
 
 	/* Is there dump data waiting for us? If there isn't,
 	 * then register a new dump area, and release all of
@@ -305,6 +351,7 @@ static int __init phyp_dump_setup(void)
 	rtas = of_find_node_by_path("/rtas");
 	dump_header = of_get_property(rtas, "ibm,kernel-dump", &header_len);
 	of_node_put(rtas);
+	print_dump_header(dump_header);
 
 	dump_area_length = init_dump_header(&phdr);
 	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK; /* align down */
@@ -314,6 +361,22 @@ static int __init phyp_dump_setup(void)
 		return 0;
 	}
 
+	/* re-register the dump area, if old dump was invalid */
+	if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+		invalidate_last_dump(&phdr, dump_area_start);
+		register_dump_area(&phdr, dump_area_start);
+		return 0;
+	}
+
+	if (dump_header) {
+		phyp_dump_info->reserved_scratch_addr =
+				dump_header->cpu_data.destination_address;
+		phyp_dump_info->reserved_scratch_size =
+				dump_header->cpu_data.source_length +
+				dump_header->hpte_data.source_length +
+				dump_header->kernel_data.source_length;
+	}
+
 	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
 	rc = subsys_create_file(&kernel_subsys, &rr);
 	if (rc)
Index: 2.6.24-rc5/include/asm/phyp_dump.h
===================================================================
--- 2.6.24-rc5.orig/include/asm/phyp_dump.h	2008-02-12 06:12:37.000000000 -0600
+++ 2.6.24-rc5/include/asm/phyp_dump.h	2008-02-12 06:13:17.000000000 -0600
@@ -18,7 +18,8 @@
 /* The RMR region will be saved for later dumping
  * whenever the kernel crashes. Set this to 256MB. */
 #define PHYP_DUMP_RMR_START 0x0
-#define PHYP_DUMP_RMR_END   (1UL<<28)
+/*#define PHYP_DUMP_RMR_END   (1UL<<28)*/
+#define PHYP_DUMP_RMR_END   (1UL<<27)
 
 struct phyp_dump {
 	/* Memory that is reserved during very early boot. */
@@ -30,6 +31,9 @@ struct phyp_dump {
 	/* store cpu & hpte size */
 	unsigned long cpu_state_size;
 	unsigned long hpte_region_size;
+	/* previous scratch area values */
+	unsigned long reserved_scratch_addr;
+	unsigned long reserved_scratch_size;
 };
 
 extern struct phyp_dump *phyp_dump_info;

^ permalink raw reply

* [PATCH 7/8] pseries: phyp dump: Tracking memory range freed.
From: Manish Ahuja @ 2008-02-12  7:20 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>

This patch tracks the size freed. For now it does a simple
rudimentary calculation of the ranges freed. The idea is
to keep it simple at the external shell script level and 
send in large chunks for now.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
-----

---
 arch/powerpc/platforms/pseries/phyp_dump.c |   35 +++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:17.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/platforms/pseries/phyp_dump.c	2008-02-12 06:13:21.000000000 -0600
@@ -259,6 +259,39 @@ void release_memory_range(unsigned long 
 	}
 }
 
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+	static unsigned long scratch_area_size, reserved_area_size;
+
+	if (addr < phyp_dump_info->init_reserve_start)
+		return;
+
+	if ((addr >= phyp_dump_info->init_reserve_start) &&
+	    (addr <= phyp_dump_info->init_reserve_start +
+	     phyp_dump_info->init_reserve_size))
+		reserved_area_size += length;
+
+	if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+	    (addr <= phyp_dump_info->reserved_scratch_addr +
+	     phyp_dump_info->reserved_scratch_size))
+		scratch_area_size += length;
+
+	if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+	    (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+		invalidate_last_dump(&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+		register_dump_area (&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+	}
+}
+
 /* ------------------------------------------------- */
 /**
  * sysfs_release_region -- sysfs interface to release memory range.
@@ -282,6 +315,8 @@ ssize_t store_release_region(struct kset
 	if (ret != 2)
 		return -EINVAL;
 
+	track_freed_range(start_addr, length);
+
 	/* Range-check - don't free any reserved memory that
 	 * wasn't reserved for phyp-dump */
 	if (start_addr < phyp_dump_info->init_reserve_start)

^ permalink raw reply

* [PATCH 8/8] pseries: phyp dump: config file
From: Manish Ahuja @ 2008-02-12  7:21 UTC (permalink / raw)
  To: linuxppc-dev, paulus; +Cc: mahuja, linasvepstas, lkessler, strosake
In-Reply-To: <47B13D2E.1070001@austin.ibm.com>


Add hypervisor-assisted dump to kernel config

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

-----
 arch/powerpc/Kconfig |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: 2.6.24-rc5/arch/powerpc/Kconfig
===================================================================
--- 2.6.24-rc5.orig/arch/powerpc/Kconfig	2008-02-12 06:12:08.000000000 -0600
+++ 2.6.24-rc5/arch/powerpc/Kconfig	2008-02-12 06:13:24.000000000 -0600
@@ -266,6 +266,17 @@ config CRASH_DUMP
 
 	  Don't change this unless you know what you are doing.
 
+config PHYP_DUMP
+	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+	depends on PPC_PSERIES && EXPERIMENTAL
+	default y
+	help
+	  Hypervisor-assisted dump is meant to be a kdump replacement
+	  offering robustness and speed not possible without system
+	  hypervisor assistence.
+
+	  If unsure, say "Y"
+
 config PPCBUG_NVRAM
 	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
 	default y if PPC_PREP

^ permalink raw reply


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox