* Re: dtc: Address an assortment of portability problems
From: David Gibson @ 2008-06-28 0:15 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, Benno Rice
In-Reply-To: <4864FECF.3010304@freescale.com>
On Fri, Jun 27, 2008 at 09:53:03AM -0500, Scott Wood wrote:
> David Gibson wrote:
>> On Thu, Jun 26, 2008 at 10:25:28AM -0500, Scott Wood wrote:
>>> On Thu, Jun 26, 2008 at 11:03:49AM +1000, David Gibson wrote:
>>>> - the endian handling functions in libfdt_env.h, based on
>>>> endian.h and byteswap.h are replaced with some portable open-coded
>>>> versions. Unfortunately, these result in fairly crappy code when
>>>> compiled, but as far as I can determine there doesn't seem to be any
>>>> POSIX, SUS or de facto standard way of determining endianness at
>>>> compile time, nor standard names for byteswapping functions.
>>> Since device-tree and network byte order happen to be the same, we could use
>>> ntohl/htonl.
>>
>> Not for the 64-bit version.
>
> Why? They operate on uint32_t despite the "l" in the name, and there
> are no 64-bit fields in the device tree...
Yes there are. The memory reservations. We have and need
fdt64_to_cpu().
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* [PATCH V2] Keep 3 high personality bytes across exec
From: Eric B Munson @ 2008-06-28 0:08 UTC (permalink / raw)
To: linuxppc-dev; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2491 bytes --]
Currently when a 32 bit process is exec'd on a powerpc 64 bit host the value
in the top three bytes of the personality is clobbered. This patch adds a
check in the SET_PERSONALITY macro that will carry all the values in the top
three bytes across the exec.
These three bytes currently carry flags to disable address randomisation,
limit the address space, force zeroing of an mmapped page, etc. Should an
application set any of these bits they will be maintained and honoured on
homogeneous environment but discarded and ignored on a heterogeneous
environment. So if an application requires all mmapped pages to be initialised
to zero and a wrapper is used to setup the personality and exec the target,
these flags will remain set on an all 32 or all 64 bit envrionment, but they
will be lost in the exec on a mixed 32/64 bit environment. Losing these bits
means that the same application would behave differently in different
environments. Tested on a POWER5+ machine with 64bit kernel and a mixed
64/32 bit user space.
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
---
V2
Changes from V1:
Updated changelog with a better description of why this change is useful
Based on 2.6.26-rc6
include/asm-powerpc/elf.h | 3 ++-
include/linux/personality.h | 6 ++++++
2 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index 9080d85..2f11a0e 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -257,7 +257,8 @@ do { \
else \
clear_thread_flag(TIF_ABI_PENDING); \
if (personality(current->personality) != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ set_personality(PER_LINUX | \
+ (current->personality & PER_INHERIT)); \
} while (0)
/*
* An executable for which elf_read_implies_exec() returns TRUE will
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff..362eb90 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -36,6 +36,12 @@ enum {
ADDR_LIMIT_3GB = 0x8000000,
};
+/* Mask for the above personality values */
+#define PER_INHERIT (ADDR_NO_RANDOMIZE|FDPIC_FUNCPTRS|MMAP_PAGE_ZERO| \
+ ADDR_COMPAT_LAYOUT|READ_IMPLIES_EXEC|ADDR_LIMIT_32BIT| \
+ SHORT_INODE|WHOLE_SECONDS|STICKY_TIMEOUTS| \
+ ADDR_LIMIT_3GB)
+
/*
* Security-relevant compatibility flags that must be
* cleared upon setuid or setgid exec:
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply related
* [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null
From: Nye Liu @ 2008-06-27 22:09 UTC (permalink / raw)
To: linux-kernel; +Cc: linuxppc-dev, netdev
In-Reply-To: <20080627192651.GA28291@curtisfong.org>
From: Nye Liu <nyet@mrv.com>
When using CONFIG_FIXED_PHY, fec_inf (fep->phydev->bus->priv) is NULL in
fs_enet/mac-fec.c restart(). Dereferencing fec_inf when trying to set the
mii_speed causes a kernel oops.
Signed-off-by: Nye Liu <nyet@mrv.com>
---
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a311d1..7359068 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -328,7 +328,8 @@ static void restart(struct net_device *dev)
/*
* Set MII speed.
*/
- FW(fecp, mii_speed, fec_inf->mii_speed);
+ if (fec_inf)
+ FW(fecp, mii_speed, fec_inf->mii_speed);
/*
* Clear any outstanding interrupt.
^ permalink raw reply related
* Re: [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null
From: Nye Liu @ 2008-06-27 22:07 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: linuxppc-dev, linux-kernel, netdev
In-Reply-To: <48655BAC.8080800@ru.mvista.com>
Sorry!
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a311d1..7359068 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -328,7 +328,8 @@ static void restart(struct net_device *dev)
/*
* Set MII speed.
*/
- FW(fecp, mii_speed, fec_inf->mii_speed);
+ if (fec_inf)
+ FW(fecp, mii_speed, fec_inf->mii_speed);
/*
* Clear any outstanding interrupt.
On Sat, Jun 28, 2008 at 01:29:16AM +0400, Sergei Shtylyov wrote:
> Hello.
>
> Nye Liu wrote:
>> From: Nye Liu <nyet@mrv.com>
>>
>> When using CONFIG_FIXED_PHY, fec_inf (fep->phydev->bus->priv) is NULL in
>> fs_enet/mac-fec.c restart(). Dereferencing fec_inf when trying to set the
>> mii_speed causes a kernel oops.
>>
>> Signed-off-by: Nye Liu <nyet@mrv.com>
>>
>> ---
>>
>> diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
>> index 8a311d1..350bc73 100644
>> --- a/drivers/net/fs_enet/mac-fec.c
>> +++ b/drivers/net/fs_enet/mac-fec.c
>> @@ -328,7 +328,8 @@ static void restart(struct net_device *dev)
>> /*
>> * Set MII speed.
>> */
>> - FW(fecp, mii_speed, fec_inf->mii_speed);
>> + if (fec_inf)
>> + FW(fecp, mii_speed, fec_inf->mii_speed);
>>
>
> Alas, Your patch is whitespace damaged.
>
>
> WBR, Sergei
>
>
^ permalink raw reply related
* Re: [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null
From: Sergei Shtylyov @ 2008-06-27 21:29 UTC (permalink / raw)
To: Nye Liu; +Cc: linuxppc-dev, linux-kernel, netdev
In-Reply-To: <20080627192651.GA28291@curtisfong.org>
Hello.
Nye Liu wrote:
> From: Nye Liu <nyet@mrv.com>
>
> When using CONFIG_FIXED_PHY, fec_inf (fep->phydev->bus->priv) is NULL in
> fs_enet/mac-fec.c restart(). Dereferencing fec_inf when trying to set the
> mii_speed causes a kernel oops.
>
> Signed-off-by: Nye Liu <nyet@mrv.com>
>
> ---
>
> diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
> index 8a311d1..350bc73 100644
> --- a/drivers/net/fs_enet/mac-fec.c
> +++ b/drivers/net/fs_enet/mac-fec.c
> @@ -328,7 +328,8 @@ static void restart(struct net_device *dev)
> /*
> * Set MII speed.
> */
> - FW(fecp, mii_speed, fec_inf->mii_speed);
> + if (fec_inf)
> + FW(fecp, mii_speed, fec_inf->mii_speed);
>
Alas, Your patch is whitespace damaged.
WBR, Sergei
^ permalink raw reply
* [PATCH v2] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
From: Kumar Gala @ 2008-06-27 21:10 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Scott Wood
In-Reply-To: <E57F448A-7217-4893-A77B-6367B0C3118A@kernel.crashing.org>
Added DMA nodes for the elo/elo-plus DMA engines.
Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
Some copy/paste bugs are now fixed (thanks Scott for actually looking at the patch).
- k
arch/powerpc/boot/dts/asp834x-redboot.dts | 35 ++++++++++++
arch/powerpc/boot/dts/ksi8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8313erdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8315erdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc832x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc832x_rdb.dts | 71 ++++++++++++++++++------
arch/powerpc/boot/dts/mpc8349emitx.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc834x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc836x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc836x_rdk.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8377_mds.dts | 70 ++++++++++++------------
arch/powerpc/boot/dts/mpc8377_rdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8378_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8378_rdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8379_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8379_rdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8540ads.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8541cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8548cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8555cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8560ads.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8568mds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8572ds.dts | 82 ++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8349.dts | 35 ++++++++++++
arch/powerpc/boot/dts/sbc8548.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8641d.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/stx_gp3_8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8540.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8541.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8548-bigflash.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8548.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8555.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8560.dts | 41 ++++++++++++++
36 files changed, 1433 insertions(+), 53 deletions(-)
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 972cf78..8b1bb0e 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -118,6 +118,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 6eb7c77..fd58043 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -83,6 +83,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 { /* For TSECs */
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca..b206843 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -144,6 +144,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ece..a40e806 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -132,6 +132,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02f..b5968b6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -114,6 +114,41 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
device_type = "crypto";
model = "SEC2";
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c..a798d86 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
dfsrr;
};
@@ -79,7 +79,7 @@
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
@@ -89,7 +89,42 @@
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
};
crypto@30000 {
@@ -98,7 +133,7 @@
compatible = "talitos";
reg = <0x30000 0x7000>;
interrupts = <11 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <24>;
@@ -106,7 +141,7 @@
descriptor-types-mask = <0x0122003f>;
};
- pic:pic@700 {
+ ipic:pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -240,13 +275,13 @@
compatible = "fsl,ucc-mdio";
phy00:ethernet-phy@00 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x4>;
device_type = "ethernet-phy";
@@ -261,7 +296,7 @@
reg = <0x80 0x80>;
big-endian;
interrupts = <32 0x8 33 0x8>; //high:32 low:33
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
};
@@ -270,21 +305,21 @@
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
- 0x8000 0x0 0x0 0x1 &pic 17 0x8
+ 0x8000 0x0 0x0 0x1 &ipic 17 0x8
/* IDSEL 0x11 AD17 (Mini1)*/
- 0x8800 0x0 0x0 0x1 &pic 18 0x8
- 0x8800 0x0 0x0 0x2 &pic 19 0x8
- 0x8800 0x0 0x0 0x3 &pic 20 0x8
- 0x8800 0x0 0x0 0x4 &pic 48 0x8
+ 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 48 0x8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
- 0x9000 0x0 0x0 0x1 &pic 19 0x8
- 0x9000 0x0 0x0 0x2 &pic 20 0x8
- 0x9000 0x0 0x0 0x3 &pic 48 0x8
- 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+ 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+ 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+ 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+ 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0x0 0x0>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676..fc0f4c9 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -93,6 +93,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@22000 {
compatible = "fsl-usb2-mph";
reg = <0x22000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735..e6afb1d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -91,6 +91,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c..9c75c7c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff2..8e33b15 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -118,6 +118,41 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
device_type = "crypto";
model = "SEC2";
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 3402d26..8acd1d6 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -113,6 +113,41 @@
clock-frequency = <0>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
compatible = "fsl,sec2-crypto";
reg = <0x30000 0x10000>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea5925..49a38cb 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,41 +233,6 @@
interrupt-parent = <&ipic>;
};
- crypto@30000 {
- model = "SEC3";
- compatible = "talitos";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
- };
-
- sdhc@2e000 {
- model = "eSDHC";
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- interrupts = <44 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- interrupts = <45 0x8>;
- interrupt-parent = <&ipic>;
- };
-
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
@@ -303,6 +268,41 @@
};
};
+ crypto@30000 {
+ model = "SEC3";
+ compatible = "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x000001fe>;
+ descriptor-types-mask = <0x03ab0ebf>;
+ };
+
+ sdhc@2e000 {
+ model = "eSDHC";
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad..e05743a 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea08..99ad49d 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -157,6 +157,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a3..a8bdbaa 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9f..980be81 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7..9d636e3 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 79881a1..f2273a8 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 66192aa..21ad71b 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 205598d..621388d 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -100,6 +100,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 7c9d0b1..6fc8059 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 5d9f3c4..ba8159d 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -73,6 +73,47 @@
interrupts = <16 2>;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index d7af8db..be9a289 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -107,6 +107,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index a444e6a..cb06325 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -117,6 +117,88 @@
dfsrr;
};
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 14f718d..ae08761 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b..5b76bb2 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index d252e38..21cbacb 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -193,6 +193,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index e556c5a..db3632e 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -98,6 +98,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec..9652456 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index 1e61283..fcd1db6 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -83,6 +83,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 3504db3..e1d260b 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -90,6 +90,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 8241ae3..d083a64 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -89,6 +89,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index d8a1b19..64d2d5b 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -96,6 +96,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index e80b450..13cd728 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -96,6 +96,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 5a57cef..96b0b94 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -89,6 +89,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index 6794882..3fe3520 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -91,6 +91,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
--
1.5.5.1
^ permalink raw reply related
* Re: [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
From: Kumar Gala @ 2008-06-27 21:08 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <48654D6D.1090309@freescale.com>
On Jun 27, 2008, at 3:28 PM, Scott Wood wrote:
> Kumar Gala wrote:
>> diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/
>> powerpc/boot/dts/asp834x-redboot.dts
>> index 972cf78..d140031 100644
>> --- a/arch/powerpc/boot/dts/asp834x-redboot.dts
>> +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
>> @@ -53,7 +53,7 @@
>> "fsl,pq2pro-localbus",
>> "simple-bus";
>> reg = <0xff005000 0x1000>;
>> - interrupts = <77 0x8>;
>> + interrupts = <47 0x8>;
>> interrupt-parent = <&ipic>;
>> ranges = <
>
> This is wrong (LBC is IRQ 77; IRQ 47 is reserved), and wasn't
> mentioned in the patch description...
This was a search/replace mistake.
>> diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/
>> boot/dts/mpc8313erdb.dts
>> index e1f0dca..ae2c4aa 100644
>> --- a/arch/powerpc/boot/dts/mpc8313erdb.dts
>> +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
>> @@ -52,7 +52,7 @@
>> #size-cells = <1>;
>> compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
>> reg = <0xe0005000 0x1000>;
>> - interrupts = <77 0x8>;
>> + interrupts = <13 0x8>;
>> interrupt-parent = <&ipic>;
>
> Likewise. 13 is the 1588 timer IRQ.
>
>> @@ -51,7 +51,7 @@
>> #size-cells = <1>;
>> compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
>> reg = <0xe0005000 0x1000>;
>> - interrupts = <77 0x8>;
>> + interrupts = <15 0x8>;
>
> I2C this time. :-P
ditto, ditto. thanks for catching them.
>> @@ -303,6 +268,41 @@
>> };
>> };
>> + crypto@30000 {
>> + model = "SEC3";
>> + compatible = "talitos";
>> + reg = <0x30000 0x10000>;
>> + interrupts = <11 0x8>;
>> + interrupt-parent = <&ipic>;
>> + /* Rev. 3.0 geometry */
>> + num-channels = <4>;
>> + channel-fifo-len = <24>;
>> + exec-units-mask = <0x000001fe>;
>> + descriptor-types-mask = <0x03ab0ebf>;
>> + };
>> +
>> + sdhc@2e000 {
>> + model = "eSDHC";
>> + compatible = "fsl,esdhc";
>> + reg = <0x2e000 0x1000>;
>> + interrupts = <42 0x8>;
>> + interrupt-parent = <&ipic>;
>> + };
>> +
>> + sata@18000 {
>> + compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
>> + reg = <0x18000 0x1000>;
>> + interrupts = <44 0x8>;
>> + interrupt-parent = <&ipic>;
>> + };
>> +
>> + sata@19000 {
>> + compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
>> + reg = <0x19000 0x1000>;
>> + interrupts = <45 0x8>;
>> + interrupt-parent = <&ipic>;
>> + };
>
> Doesn't match the changelog, and the crypto binding is old.
Its because diff doesn't like the fact that I moved the dma node up.
>> diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/
>> boot/dts/mpc8378_mds.dts
>> index 1d6ea08..5d57f5d 100644
>> --- a/arch/powerpc/boot/dts/mpc8378_mds.dts
>> +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
>> @@ -52,7 +52,7 @@
>> #size-cells = <1>;
>> compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
>> reg = <0xe0005000 0x1000>;
>> - interrupts = <77 0x8>;
>> + interrupts = <78 0x8>;
>
> Another mangled localbus interrupt (and more after this).
I think I got them all.
- k
^ permalink raw reply
* Re: [2.6 patch] asm/ptrace.h userspace headers cleanup
From: Roland McGrath @ 2008-06-23 20:08 UTC (permalink / raw)
To: Adrian Bunk
Cc: chris, dev-etrax, ysato, linux-parisc, linux-sh, linux-mips,
cooloney, linux-kernel, linuxppc-dev, paulus, gerg, Andrew Morton,
yasutake.koichi, rmk
In-Reply-To: <20080623174809.GE4756@cs181140183.pp.htv.fi>
That all looks fine to me, though I won't claim to have paid close
attention to the nits in the various odd archs' files.
Thanks,
Roland
^ permalink raw reply
* Re: issue with kgdb on ppc
From: SEEMA pm @ 2008-06-27 20:46 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <4e69a5150806261453n1196b5b8va61e330ea57bb00e@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2283 bytes --]
Hello
I got the gianfar.c patch and enabled CONFIG_NETCONSOLE and now i'm able to
connect kgdb and gdb.
But when i try to cont in gdb, the system tries to load the rootfs but fails
and trys to reboot. Can someone please provide some help on this.
dump:
(gdb) c
Continuing.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "ram=rw" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
total: used: free: shared: buffers: cached:
Mem: 1060827136 226791424 834035712 0 219955200 8192
Swap: 0 0 0
MemTotal: 1035964 kB
MemFree: 814488 kB
MemShared: 0 kB
Buffers: 214800 kB
Cached: 8 kB
SwapCached: 0 kB
Active: 0 kB
Inactive: 0 kB
HighTotal: 1035964 kB
HighFree: 814488 kB
LowTotal: 0 kB
LowFree: 0 kB
SwapTotal: 8192 kB
SwapFree: 0 kB
[New Thread 1]
Program received signal SIGTRAP, Trace/breakpoint trap.
0x8003c0d8 in breakpoint () at kernel/kgdb.c:1773
1773 wmb();
(gdb)
Thanks
On Thu, Jun 26, 2008 at 2:53 PM, SEEMA pm <seema.pm@gmail.com> wrote:
> Hello
>
> I'm trying to get kgdb working on a mpc8540 based target machine. I took
> the latest patches which are for 2.6.13(mine is 2.6.11) and build and made
> changes to config by enabling :
> - Compile the kernel with debug info
> - KGDB: kernel debugging with remote gdb
> - KGDB: Console messages through gdb
> - Method for KGDB communication (KGDB: On ethernet - in kernel)
>
> I also added bootargs through uboot as:
> kgdboe=6443@10.110.1.2/,6442@10.110.1.31/00:0F:1F:6E:F3:30 kgdbwait
>
> Now, I'm getting the messages:
> netconsole: not configured, aborting
> kgdboe: eth0 doesn't support polling, aborting.
> kgdboe: netpoll_setup failed kgdboe failed
>
> And after some lines;
>
> kgdb: Defering I/O setup to kernel module.
> kgdb: Waiting for connection from remote gdb...
> But then it goes to load ramdisk.
>
> Can someone please provide some help on this
>
> thanks
>
>
>
[-- Attachment #2: Type: text/html, Size: 3768 bytes --]
^ permalink raw reply
* Re: [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
From: Scott Wood @ 2008-06-27 20:28 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
In-Reply-To: <Pine.LNX.4.64.0806271449540.9071@blarg.am.freescale.net>
Kumar Gala wrote:
> diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
> index 972cf78..d140031 100644
> --- a/arch/powerpc/boot/dts/asp834x-redboot.dts
> +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
> @@ -53,7 +53,7 @@
> "fsl,pq2pro-localbus",
> "simple-bus";
> reg = <0xff005000 0x1000>;
> - interrupts = <77 0x8>;
> + interrupts = <47 0x8>;
> interrupt-parent = <&ipic>;
>
> ranges = <
This is wrong (LBC is IRQ 77; IRQ 47 is reserved), and wasn't mentioned
in the patch description...
> diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
> index e1f0dca..ae2c4aa 100644
> --- a/arch/powerpc/boot/dts/mpc8313erdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
> @@ -52,7 +52,7 @@
> #size-cells = <1>;
> compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
> reg = <0xe0005000 0x1000>;
> - interrupts = <77 0x8>;
> + interrupts = <13 0x8>;
> interrupt-parent = <&ipic>;
Likewise. 13 is the 1588 timer IRQ.
> @@ -51,7 +51,7 @@
> #size-cells = <1>;
> compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
> reg = <0xe0005000 0x1000>;
> - interrupts = <77 0x8>;
> + interrupts = <15 0x8>;
I2C this time. :-P
> @@ -303,6 +268,41 @@
> };
> };
>
> + crypto@30000 {
> + model = "SEC3";
> + compatible = "talitos";
> + reg = <0x30000 0x10000>;
> + interrupts = <11 0x8>;
> + interrupt-parent = <&ipic>;
> + /* Rev. 3.0 geometry */
> + num-channels = <4>;
> + channel-fifo-len = <24>;
> + exec-units-mask = <0x000001fe>;
> + descriptor-types-mask = <0x03ab0ebf>;
> + };
> +
> + sdhc@2e000 {
> + model = "eSDHC";
> + compatible = "fsl,esdhc";
> + reg = <0x2e000 0x1000>;
> + interrupts = <42 0x8>;
> + interrupt-parent = <&ipic>;
> + };
> +
> + sata@18000 {
> + compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
> + reg = <0x18000 0x1000>;
> + interrupts = <44 0x8>;
> + interrupt-parent = <&ipic>;
> + };
> +
> + sata@19000 {
> + compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
> + reg = <0x19000 0x1000>;
> + interrupts = <45 0x8>;
> + interrupt-parent = <&ipic>;
> + };
Doesn't match the changelog, and the crypto binding is old.
> diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
> index 1d6ea08..5d57f5d 100644
> --- a/arch/powerpc/boot/dts/mpc8378_mds.dts
> +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
> @@ -52,7 +52,7 @@
> #size-cells = <1>;
> compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
> reg = <0xe0005000 0x1000>;
> - interrupts = <77 0x8>;
> + interrupts = <78 0x8>;
Another mangled localbus interrupt (and more after this).
-Scott
^ permalink raw reply
* Re: [PATCH] POWERPC CPM: Minor cosmetic changes to udbg_putc
From: Scott Wood @ 2008-06-27 20:11 UTC (permalink / raw)
To: Nye Liu; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20080627200100.GA16661@mrv.com>
Nye Liu wrote:
> udbg_putc is a *function pointer* that is initialized during
> udbg_init_cpm. It might not be initialized properly when called from
> udbg_putc_cpm(), so (recursively) call udbg_putc_cpm() directly.
ACK
> Printing an "X" on initialization is ugly. How about a "\n" instead?
D'oh, that was a debugging leftover that I missed when cleaning things
up. Just remove it.
-Scott
^ permalink raw reply
* [PATCH] POWERPC CPM: Minor cosmetic changes to udbg_putc
From: Nye Liu @ 2008-06-27 20:01 UTC (permalink / raw)
To: linux-kernel; +Cc: scottwood, linuxppc-dev
From: Nye Liu <nyet@mrv.com>
udbg_putc is a *function pointer* that is initialized during
udbg_init_cpm. It might not be initialized properly when called from
udbg_putc_cpm(), so (recursively) call udbg_putc_cpm() directly.
Printing an "X" on initialization is ugly. How about a "\n" instead?
Signed-off-by: Nye Liu <nyet@mrv.com>
---
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index cb7df2d..dcde743 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -37,7 +37,7 @@ static void udbg_putc_cpm(char c)
u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
if (c == '\n')
- udbg_putc('\r');
+ udbg_putc_cpm('\r');
while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
;
@@ -53,7 +53,7 @@ void __init udbg_init_cpm(void)
setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
#endif
udbg_putc = udbg_putc_cpm;
- udbg_putc('X');
+ udbg_putc('\n');
}
}
#endif
--
Nye Liu
nliu@mrv.com
(818) 772-6235x248
(818) 772-0576 fax
"Who would be stupid enough to quote a fictitious character?"
-- Don Quixote
^ permalink raw reply related
* [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
From: Kumar Gala @ 2008-06-27 19:50 UTC (permalink / raw)
To: linuxppc-dev
Added DMA nodes for the elo/elo-plus DMA engines.
Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
In my powerpc-next branch.
- k
arch/powerpc/boot/dts/asp834x-redboot.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/ksi8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8313erdb.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc8315erdb.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc832x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc832x_rdb.dts | 71 ++++++++++++++++++------
arch/powerpc/boot/dts/mpc8349emitx.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc834x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc836x_mds.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc836x_rdk.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8377_mds.dts | 70 ++++++++++++------------
arch/powerpc/boot/dts/mpc8377_rdb.dts | 35 ++++++++++++
arch/powerpc/boot/dts/mpc8378_mds.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc8378_rdb.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc8379_mds.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc8379_rdb.dts | 37 ++++++++++++-
arch/powerpc/boot/dts/mpc8540ads.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8541cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8548cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8555cds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8560ads.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8568mds.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/mpc8572ds.dts | 82 ++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8349.dts | 35 ++++++++++++
arch/powerpc/boot/dts/sbc8548.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/sbc8641d.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/stx_gp3_8560.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8540.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8541.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8548-bigflash.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8548.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8555.dts | 41 ++++++++++++++
arch/powerpc/boot/dts/tqm8560.dts | 41 ++++++++++++++
36 files changed, 1440 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 972cf78..d140031 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -53,7 +53,7 @@
"fsl,pq2pro-localbus",
"simple-bus";
reg = <0xff005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
ranges = <
@@ -118,6 +118,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 6eb7c77..fd58043 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -83,6 +83,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 { /* For TSECs */
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca..ae2c4aa 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -52,7 +52,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <13 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
@@ -144,6 +144,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ece..5706c80 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -51,7 +51,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
@@ -132,6 +132,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02f..b5968b6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -114,6 +114,41 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
device_type = "crypto";
model = "SEC2";
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c..a798d86 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
dfsrr;
};
@@ -79,7 +79,7 @@
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
@@ -89,7 +89,42 @@
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
};
crypto@30000 {
@@ -98,7 +133,7 @@
compatible = "talitos";
reg = <0x30000 0x7000>;
interrupts = <11 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <24>;
@@ -106,7 +141,7 @@
descriptor-types-mask = <0x0122003f>;
};
- pic:pic@700 {
+ ipic:pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -240,13 +275,13 @@
compatible = "fsl,ucc-mdio";
phy00:ethernet-phy@00 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <0>;
reg = <0x4>;
device_type = "ethernet-phy";
@@ -261,7 +296,7 @@
reg = <0x80 0x80>;
big-endian;
interrupts = <32 0x8 33 0x8>; //high:32 low:33
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
};
};
@@ -270,21 +305,21 @@
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
- 0x8000 0x0 0x0 0x1 &pic 17 0x8
+ 0x8000 0x0 0x0 0x1 &ipic 17 0x8
/* IDSEL 0x11 AD17 (Mini1)*/
- 0x8800 0x0 0x0 0x1 &pic 18 0x8
- 0x8800 0x0 0x0 0x2 &pic 19 0x8
- 0x8800 0x0 0x0 0x3 &pic 20 0x8
- 0x8800 0x0 0x0 0x4 &pic 48 0x8
+ 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 48 0x8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
- 0x9000 0x0 0x0 0x1 &pic 19 0x8
- 0x9000 0x0 0x0 0x2 &pic 20 0x8
- 0x9000 0x0 0x0 0x3 &pic 48 0x8
- 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+ 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+ 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+ 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+ 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
- interrupt-parent = <&pic>;
+ interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0x0 0x0>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676..fc0f4c9 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -93,6 +93,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@22000 {
compatible = "fsl-usb2-mph";
reg = <0x22000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735..e6afb1d 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -91,6 +91,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c..9c75c7c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff2..8e33b15 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -118,6 +118,41 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
device_type = "crypto";
model = "SEC2";
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 3402d26..8acd1d6 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -113,6 +113,41 @@
clock-frequency = <0>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
crypto@30000 {
compatible = "fsl,sec2-crypto";
reg = <0x30000 0x10000>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea5925..49a38cb 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,41 +233,6 @@
interrupt-parent = <&ipic>;
};
- crypto@30000 {
- model = "SEC3";
- compatible = "talitos";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
- };
-
- sdhc@2e000 {
- model = "eSDHC";
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <42 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- interrupts = <44 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- interrupts = <45 0x8>;
- interrupt-parent = <&ipic>;
- };
-
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
@@ -303,6 +268,41 @@
};
};
+ crypto@30000 {
+ model = "SEC3";
+ compatible = "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x000001fe>;
+ descriptor-types-mask = <0x03ab0ebf>;
+ };
+
+ sdhc@2e000 {
+ model = "eSDHC";
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad..e05743a 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea08..5d57f5d 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -52,7 +52,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <78 0x8>;
interrupt-parent = <&ipic>;
// booting from NOR flash
@@ -157,6 +157,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a3..1d22f54 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -51,7 +51,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <78 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9f..5787f59 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -52,7 +52,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <79 0x8>;
interrupt-parent = <&ipic>;
// booting from NOR flash
@@ -157,6 +157,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7..8c42108 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -51,7 +51,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 0x8>;
+ interrupts = <79 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
@@ -143,6 +143,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 79881a1..f2273a8 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 66192aa..21ad71b 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 205598d..621388d 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -100,6 +100,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 7c9d0b1..6fc8059 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -84,6 +84,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 5d9f3c4..ba8159d 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -73,6 +73,47 @@
interrupts = <16 2>;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index d7af8db..be9a289 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -107,6 +107,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8568-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index a444e6a..cb06325 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -117,6 +117,88 @@
dfsrr;
};
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 14f718d..ae08761 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b..5b76bb2 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
mode = "cpu";
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
/* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index d252e38..21cbacb 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -193,6 +193,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index e556c5a..db3632e 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -98,6 +98,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec..9652456 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index 1e61283..fcd1db6 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -83,6 +83,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 3504db3..e1d260b 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -90,6 +90,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8540-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 8241ae3..d083a64 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -89,6 +89,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8541-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index d8a1b19..64d2d5b 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -96,6 +96,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index e80b450..13cd728 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -96,6 +96,47 @@
dfsrr;
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 5a57cef..96b0b94 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -89,6 +89,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8555-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index 6794882..3fe3520 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -91,6 +91,47 @@
};
};
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8560-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
--
1.5.5.1
^ permalink raw reply related
* Re: [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform
From: Kumar Gala @ 2008-06-27 19:47 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: Scott Wood, linuxppc-dev
In-Reply-To: <200806272135.47167.arnd@arndb.de>
On Jun 27, 2008, at 2:35 PM, Arnd Bergmann wrote:
> On Friday 27 June 2008, Scott Wood wrote:
>> On Fri, Jun 27, 2008 at 11:36:36AM -0500, Kumar Gala wrote:
>>> There isn't any reason at this point that we can't build 83xx &
>>> 86xx support
>>> in with the other 6xx based boards. Twiddle the Kconfigs to allow
>>> this.
>>
>> Likewise with 82xx -- why don't we just get rid of the "Machine type"
>> choice, and turn them all into bools?
>
> I started looking for possible problems with hardcoded settings for
> some
> of the platforms, and the only code that looked suspicious in this
> regard
> was CPM2, but it turned out that this was all because of code built
> without
> CONFIG_PPC_CPM_NEW_BINDING, which is practically gone in kumar's
> powerpc-next
> branch.
I've posted patches to remove CONFIG_PPC_CPM_NEW_BINDING, and just
holding off on the enet ones to see how merging goes w/Jeff.
- k
^ permalink raw reply
* Re: [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform
From: Arnd Bergmann @ 2008-06-27 19:35 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Scott Wood
In-Reply-To: <20080627180423.GB12627@ld0162-tx32.am.freescale.net>
On Friday 27 June 2008, Scott Wood wrote:
> On Fri, Jun 27, 2008 at 11:36:36AM -0500, Kumar Gala wrote:
> > There isn't any reason at this point that we can't build 83xx & 86xx su=
pport
> > in with the other 6xx based boards. =A0Twiddle the Kconfigs to allow th=
is.
>=20
> Likewise with 82xx -- why don't we just get rid of the "Machine type"
> choice, and turn them all into bools?
I started looking for possible problems with hardcoded settings for some
of the platforms, and the only code that looked suspicious in this regard
was CPM2, but it turned out that this was all because of code built without
CONFIG_PPC_CPM_NEW_BINDING, which is practically gone in kumar's powerpc-ne=
xt
branch.
Arnd <><
^ permalink raw reply
* [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null
From: Nye Liu @ 2008-06-27 19:26 UTC (permalink / raw)
To: linux-kernel; +Cc: linuxppc-dev, netdev
From: Nye Liu <nyet@mrv.com>
When using CONFIG_FIXED_PHY, fec_inf (fep->phydev->bus->priv) is NULL in
fs_enet/mac-fec.c restart(). Dereferencing fec_inf when trying to set the
mii_speed causes a kernel oops.
Signed-off-by: Nye Liu <nyet@mrv.com>
---
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a311d1..350bc73 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -328,7 +328,8 @@ static void restart(struct net_device *dev)
/*
* Set MII speed.
*/
- FW(fecp, mii_speed, fec_inf->mii_speed);
+ if (fec_inf)
+ FW(fecp, mii_speed, fec_inf->mii_speed);
/*
* Clear any outstanding interrupt.
^ permalink raw reply related
* [PATCH v2] powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform
From: Kumar Gala @ 2008-06-27 19:00 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <20080627180423.GB12627@ld0162-tx32.am.freescale.net>
There isn't any reason at this point that we can't build 82xx, 83xx & 86xx
support in with the other 6xx based boards. Twiddle the Kconfigs to allow
this.
This allows us to remove the machine type selection for related to 6xx.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
Added 82xx into multiplatform and removed Machine Type as a choice so there
is only one choice now.
arch/powerpc/platforms/82xx/Kconfig | 11 ++++++-----
arch/powerpc/platforms/83xx/Kconfig | 10 ++++++----
arch/powerpc/platforms/86xx/Kconfig | 16 +++++++++++-----
arch/powerpc/platforms/Kconfig | 33 +++------------------------------
4 files changed, 26 insertions(+), 44 deletions(-)
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 917ac88..1c8034b 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,7 +1,8 @@
-choice
- prompt "82xx Board Type"
- depends on PPC_82xx
- default MPC8272_ADS
+menuconfig PPC_82xx
+ bool "82xx-based boards (PQ II)"
+ depends on 6xx && PPC_MULTIPLATFORM
+
+if PPC_82xx
config MPC8272_ADS
bool "Freescale MPC8272 ADS"
@@ -36,7 +37,7 @@ config EP8248E
This board is also resold by Freescale as the QUICCStart
MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
-endchoice
+endif
config PQ2ADS
bool
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index fe75b2a..27d9bf8 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,10 +1,12 @@
-menuconfig MPC83xx
- bool "83xx Board Type"
- depends on PPC_83xx
+menuconfig PPC_83xx
+ bool "83xx-based boards"
+ depends on 6xx && PPC_MULTIPLATFORM
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
+ select FSL_SOC
+ select IPIC
-if MPC83xx
+if PPC_83xx
config MPC831x_RDB
bool "Freescale MPC831x RDB"
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a..80a81e0 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,13 @@
-choice
- prompt "86xx Board Type"
- depends on PPC_86xx
- default MPC8641_HPCN
+config PPC_86xx
+menuconfig PPC_86xx
+ bool "86xx-based boards"
+ depends on 6xx && PPC_MULTIPLATFORM
+ select FSL_SOC
+ select ALTIVEC
+ help
+ The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
config MPC8641_HPCN
bool "Freescale MPC8641 HPCN"
@@ -24,7 +30,7 @@ config MPC8610_HPCD
help
This option enables support for the MPC8610 HPCD board.
-endchoice
+endif
config MPC8641
bool
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c5..690c1f4 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,36 +1,9 @@
menu "Platform support"
-choice
- prompt "Machine type"
- depends on PPC64 || 6xx
- default PPC_MULTIPLATFORM
-
config PPC_MULTIPLATFORM
- bool "Generic desktop/server/laptop"
- help
- Select this option if configuring for an IBM pSeries or
- RS/6000 machine, an Apple machine, or a PReP, CHRP,
- Maple or Cell-based machine.
-
-config PPC_82xx
- bool "Freescale 82xx"
- depends on 6xx
-
-config PPC_83xx
- bool "Freescale 83xx"
- depends on 6xx
- select FSL_SOC
- select MPC83xx
- select IPIC
-
-config PPC_86xx
- bool "Freescale 86xx"
- depends on 6xx
- select FSL_SOC
- select ALTIVEC
- help
- The Freescale E600 SoCs have 74xx cores.
-endchoice
+ bool
+ depends on PPC64 || 6xx
+ default y
config CLASSIC32
def_bool y
--
1.5.5.1
^ permalink raw reply related
* Re: Linux on Virtex board with ARCH=powerpc
From: Peter Korsgaard @ 2008-06-27 18:14 UTC (permalink / raw)
To: Peter Mendham; +Cc: John Linn, linuxppc-embedded
In-Reply-To: <4864DD66.5040909@computing.dundee.ac.uk>
>>>>> "Peter" == Peter Mendham <petermendham@computing.dundee.ac.uk> writes:
Hi,
Peter> I now have a new and rather bizarre problem, which maybe you
Peter> or someone else has met before. I have a simple FPGA design
Peter> with memory, a sysace and a uart16550 on an ML405 (I've put my
Peter> hardware to one side for the moment). It works just fine. If
Peter> I swap the uart16550 for a uartlite (remaking the kernel with
Peter> the correct device tree) I see all the boot messages and the
Peter> kernel seems to start OK, the root partition is mounted but
Peter> then I see nothing from /sbin/init. This is the same root fs
Peter> that I was using with the uart16550 example I just mentioned.
Did you remember to change your inittab to use /dev/ttyUL0?
--
Bye, Peter Korsgaard
^ permalink raw reply
* Re: [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform
From: Scott Wood @ 2008-06-27 18:04 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
In-Reply-To: <Pine.LNX.4.64.0806271136240.20344@blarg.am.freescale.net>
On Fri, Jun 27, 2008 at 11:36:36AM -0500, Kumar Gala wrote:
> There isn't any reason at this point that we can't build 83xx & 86xx support
> in with the other 6xx based boards. Twiddle the Kconfigs to allow this.
Likewise with 82xx -- why don't we just get rid of the "Machine type"
choice, and turn them all into bools?
At the very least, change the misleading prompt and help text of
PPC_MULTIPLATFORM before expanding the set of platforms that hide behind
it.
-Scott
^ permalink raw reply
* Re: [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets
From: Scott Wood @ 2008-06-27 17:49 UTC (permalink / raw)
To: Grant Likely; +Cc: paulus, petermendham, linuxppc-dev, john.linn
In-Reply-To: <20080625202104.30114.47902.stgit@trillian.secretlab.ca>
On Wed, Jun 25, 2008 at 01:21:04PM -0700, Grant Likely wrote:
> + zImage.%: Image usable by OpenFirmware. Image expects firmware
> + to provide the device tree using OpenFirmware
> + interfaces. Typically general purpose hardware uses
> + this image format.
Is it really specific to Open Firmware? I'd say something like: "Image
format usable by the firmware natively shipped on the board, if not
covered by another image type. A device tree is not embedded into the
image."
-Scott
^ permalink raw reply
* Re: Merging seperate FDT-blobs?
From: Wolfram Sang @ 2008-06-27 17:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <20080623050624.GA23064@yookeroo.seuss>
[-- Attachment #1: Type: text/plain, Size: 6565 bytes --]
Hello David,
On Mon, Jun 23, 2008 at 03:06:24PM +1000, David Gibson wrote:
> Hrm. I was assuming this would be handled by the code putting things
> together, rather than being encoded into the fragments. I envisaged
> something like:
>
> int fdt_graft(void *fdt, int parentoffset, const char *name,
> void *fragment);
>
> This would attach the tree fragment in the blob at 'fragment' into the
> tree 'fdt', with fragment's root gaining the name 'name' and being a
> child of the existing node at 'parentoffset'.
This function is surely needed in every case I considered so far. I am
just sceptical if the boot-loader can determine a correct parentoffset
all alone (which one of the two I2C busses is the correct one?). This is
why I added the property "external-name" as a helping hand. Meanwhile, I
found your proposal about handling the aliases-node
(http://ozlabs.org/pipermail/linuxppc-dev/2007-November/045778.html)
and think it will be a better alternative (as mentioned below).
> > 2) How to deal with phandles?
> > The fragment does not know anything about phandles from the main
> > tree, so it cannot use them, although it needs to for a number of
> > typical fdt-entries.
>
> Ah. This is harder. And there are two sub-pieces to this problem.
> First, how to ensure that any phandles for nodes in the fragment don't
> collide with phandles from the parent tree or other included
> fragments. Second, how to fixup phandle references in between
> initially separate fragments.
> As an asside, I think going through the grafted fragment and adjusting
> phandles to avoid collisions is a no-goer. Any new binding can
> potentially introduce a new property in which phandles appear, so we
> can't really know where to look for phandles and adjust.
True. I didn't take into account that phandles may show up anywhere,
even in a field of cells. Sigh, I wish phandles had some marker tag
(no, I don't expect this to happen).
> So, for the first part, for now, I think the sanest way to handle this
> for now is simply to require that the fragments have non-overlapping
> phandles. For example by specifically allocating different ranges for
> different fragments when assembling a collection of such things.
> There are problems with this approach, and we may need something
> better, but I think it's where we need to start.
> At the moment that will require manually assigning all phandles, but
> we could extend dtc with a directive giving the range in which to
> assign phandles.
So, if dtc has the possibility to specify a range for phandles, every
fragment gets its own "namespace" for phandles. Handles which are
clearly not leaving the namespace can still be referenced using the
convenient <&phandle> syntax. Every phandle which needs to be accessed
from different namespaces, has to be hardcoded, preferably in their own
hardcoded namespace (e.g. linux,phandle = <0xfffffxyz>). Nice thing is,
that it still can be assigned a dtc-label, so referencing inside the
same source is also easy to maintain. Using macro features, one could
even use #defines for the hardcoded values.
Still, I sense some practical issues. I guess I need to sketch some
more possible constellations to get an even bigger picture. Problem is
as often: if you get generic, you get complexity.
> Hrm. I don't really follow the point of this scheme. It seems like
> you're encoding how to assemble the fragments into the master
> fragment.
What I encoded using "external-name" is where possible fragments
_could_ be added to. Something like a mount-point. The boot-loader
decides if and what could be mounted there. As an "/aliases" node is
already in use, I would favour to add such mount-points there.
> But the whole point of assembling fragments is that the
> master can encode several different trees depending what's included,
> which means something else needs to decide whether they're merged or
> not. I think just provide fdt_graft() as above, and leave the
> decisions about where and whether to the assembly code in the wrapper
> or bootloader.
I assume the main tagret for this criticism is the "externals"-node I
introduced at the very end. I agree that its functionality could be
transferred to the boot-loader (e.g. give the boot-loader a list of
addresses to check for potential eeproms). I wouldn't mind dropping the
"externals" node; sounds in deed a bit cleaner.
> This doesn't work for properties which include phandles but are not
> simply a single phandle; 'interrupt-map' for example.
Check mate :(
> We'll need property iteration for this, which we don't currently have.
> But I've been intending to implement that for a while anyway.
I am quite sure it will come handy on the way nontheless.
>
> > propname = property without 'phandle-for-';
> >
> > name = fdt_getprop(external_fdt, cur_node, property);
> >
> > phandle_offset = fdt_node_offset_by_prop_value(main_fdt, "external-name", name)
> > phandle = fdt_get_phandle(main_fdt, phandle_offset);
> >
> > fdt_setprop(external_fdt, propname, phandle);
> > copy_prop_to_main_fdt();
> > }
>
> Hrm. This doesn't seem all that useful. It only handles adjusting
> phandle references that are in the external tree pointing into one of
> the fragments. Since the fragments more-or-less by definition aren't
> always present, this is an unlikely use case. What I *can* see
> happening is things within the fragments wanting to refer to an
> always-present piece of hardware outside - the main interrupt
> controller, in particular.
>
Ehrm, most likely my example was not clear enough, I am sorry. The case
of a fragment wanting to reach the main interrupt controller was exactly
what I had in mind when writing this. For completeness, I will try to
clear it up, although it won't work, as stated before: The
'phandle-for-*' property is in the fragment. It's value (let's say
'pic-0') is taken from the fragment. An apropriate mount-point (set by
'external-name = "pic-0"' in the main tree) is searched in the main
tree. The phandle of the mount point is taked from the main tree. This
value will become the new phandle inside the fragment pointing to the
main tree. In the end, the whole fragment will be grafted into the main
tree, of course.
Thanks for your feedback!
Wolfram
--
Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH v2] update crypto node definition and device tree instances
From: Kim Phillips @ 2008-06-27 16:52 UTC (permalink / raw)
To: linuxppc-dev
delete obsolete device-type property, delete model property
(use compatible property instead), prepend "fsl," to Freescale
specific properties. Add nodes to device trees that are missing them,
and fix broken property values in other trees.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
changes from v1: b-w-of.txt:
- - compatible : Should contain entries for all compatible SEC versions,
- high to low, e.g., "fsl,sec2.1", "fsl,sec2.0"
+ - compatible : Should contain entries for this and backward compatible
+ SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0"
Documentation/powerpc/booting-without-of.txt | 51 +++++++++++++-------------
arch/powerpc/boot/dts/mpc8272ads.dts | 21 ++++-------
arch/powerpc/boot/dts/mpc8313erdb.dts | 15 +++-----
arch/powerpc/boot/dts/mpc8315erdb.dts | 15 ++++----
arch/powerpc/boot/dts/mpc832x_mds.dts | 15 +++-----
arch/powerpc/boot/dts/mpc832x_rdb.dts | 15 +++-----
arch/powerpc/boot/dts/mpc8349emitx.dts | 12 +++----
arch/powerpc/boot/dts/mpc8349emitxgp.dts | 12 +++----
arch/powerpc/boot/dts/mpc834x_mds.dts | 15 +++-----
arch/powerpc/boot/dts/mpc836x_mds.dts | 13 +++----
arch/powerpc/boot/dts/mpc8377_mds.dts | 13 +++----
arch/powerpc/boot/dts/mpc8377_rdb.dts | 14 +++----
arch/powerpc/boot/dts/mpc8378_mds.dts | 13 +++----
arch/powerpc/boot/dts/mpc8378_rdb.dts | 14 +++----
arch/powerpc/boot/dts/mpc8379_mds.dts | 13 +++----
arch/powerpc/boot/dts/mpc8379_rdb.dts | 14 +++----
arch/powerpc/boot/dts/mpc8541cds.dts | 11 ++++++
arch/powerpc/boot/dts/mpc8544ds.dts | 11 ++++++
arch/powerpc/boot/dts/mpc8548cds.dts | 11 ++++++
arch/powerpc/boot/dts/mpc8555cds.dts | 11 ++++++
arch/powerpc/boot/dts/mpc8568mds.dts | 14 +++----
arch/powerpc/boot/dts/mpc8572ds.dts | 12 ++++++
arch/powerpc/boot/dts/sbc8349.dts | 14 +++-----
arch/powerpc/boot/dts/sbc8548.dts | 11 ++++++
arch/powerpc/boot/dts/tqm8541.dts | 11 ++++++
arch/powerpc/boot/dts/tqm8555.dts | 11 ++++++
26 files changed, 213 insertions(+), 169 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b68684d..196e694 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1472,9 +1472,8 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- - device_type : Should be "crypto"
- - model : Model of the device. Should be "SEC1" or "SEC2"
- - compatible : Should be "talitos"
+ - compatible : Should contain entries for this and backward compatible
+ SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0"
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
@@ -1483,27 +1482,29 @@ platforms are moved over to use the flattened-device-tree model.
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- - num-channels : An integer representing the number of channels
+ - fsl,num-channels : An integer representing the number of channels
available.
- - channel-fifo-len : An integer representing the number of
+ - fsl,channel-fifo-len : An integer representing the number of
descriptor pointers each channel fetch fifo can hold.
- - exec-units-mask : The bitmask representing what execution units
+ - fsl,exec-units-mask : The bitmask representing what execution units
(EUs) are available. It's a single 32-bit cell. EU information
should be encoded following the SEC's Descriptor Header Dword
EU_SEL0 field documentation, i.e. as follows:
- bit 0 = reserved - should be 0
- bit 1 = set if SEC has the ARC4 EU (AFEU)
- bit 2 = set if SEC has the DES/3DES EU (DEU)
- bit 3 = set if SEC has the message digest EU (MDEU)
- bit 4 = set if SEC has the random number generator EU (RNG)
- bit 5 = set if SEC has the public key EU (PKEU)
- bit 6 = set if SEC has the AES EU (AESU)
- bit 7 = set if SEC has the Kasumi EU (KEU)
+ bit 0 = reserved - should be 0
+ bit 1 = set if SEC has the ARC4 EU (AFEU)
+ bit 2 = set if SEC has the DES/3DES EU (DEU)
+ bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A)
+ bit 4 = set if SEC has the random number generator EU (RNG)
+ bit 5 = set if SEC has the public key EU (PKEU)
+ bit 6 = set if SEC has the AES EU (AESU)
+ bit 7 = set if SEC has the Kasumi EU (KEU)
+ bit 8 = set if SEC has the CRC EU (CRCU)
+ bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
- bits 8 through 31 are reserved for future SEC EUs.
+ remaining bits are reserved for future SEC EUs.
- - descriptor-types-mask : The bitmask representing what descriptors
+ - fsl,descriptor-types-mask : The bitmask representing what descriptors
are available. It's a single 32-bit cell. Descriptor type
information should be encoded following the SEC's Descriptor
Header Dword DESC_TYPE field documentation, i.e. as follows:
@@ -1527,16 +1528,14 @@ platforms are moved over to use the flattened-device-tree model.
/* MPC8548E */
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <30000 10000>;
- interrupts = <1d 3>;
- interrupt-parent = <40000>;
- num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <000000fe>;
- descriptor-types-mask = <012b0ebf>;
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <29 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
};
h) Board Control and Status (BCSR)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da3..9a3881d 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -226,22 +226,15 @@
compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
};
-/* May need to remove if on a part without crypto engine */
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "fsl,mpc8272-talitos-sec2",
- "fsl,talitos-sec2",
- "fsl,talitos",
- "talitos";
- reg = <0x30000 0x10000>;
- interrupts = <11 8>;
+ compatible = "fsl,sec1.0";
+ reg = <0x40000 0x13000>;
+ interrupts = <47 0x8>;
interrupt-parent = <&PIC>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x7e>;
-/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
- descriptor-types-mask = <0x1010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x1010415>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca..03edb86 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -219,17 +219,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <0x30000 0x7000>;
+ compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 2.2 */
- num-channels = <1>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000004c>;
- descriptor-types-mask = <0x0122003f>;
+ fsl,num-channels = <1>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x4c>;
+ fsl,descriptor-types-mask = <0x0122003f>;
};
/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ece..e433303 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -206,17 +206,16 @@
};
crypto@30000 {
- model = "SEC3";
- device_type = "crypto";
- compatible = "talitos";
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3ab0abf>;
};
sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02f..5462845 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -115,17 +115,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <0x30000 0x7000>;
+ compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 2.2 */
- num-channels = <1>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000004c>;
- descriptor-types-mask = <0x0122003f>;
+ fsl,num-channels = <1>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x4c>;
+ fsl,descriptor-types-mask = <0x0122003f>;
};
ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c..7fb50ab 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -93,17 +93,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <0x30000 0x7000>;
+ compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&pic>;
- /* Rev. 2.2 */
- num-channels = <1>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000004c>;
- descriptor-types-mask = <0x0122003f>;
+ fsl,num-channels = <1>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x4c>;
+ fsl,descriptor-types-mask = <0x0122003f>;
};
pic:pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676..f7a850c 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -178,16 +178,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000007e>;
- descriptor-types-mask = <0x01010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735..b866b47 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -151,16 +151,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000007e>;
- descriptor-types-mask = <0x01010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c..e0d0753 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -193,20 +193,15 @@
interrupt-parent = <&ipic>;
};
- /* May need to remove if on a part without crypto engine */
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000007e>;
- /* desc mask is for rev2.0,
- * we need runtime fixup for >2.0 */
- descriptor-types-mask = <0x01010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff2..69e6564 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -119,17 +119,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000007e>;
- /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
- descriptor-types-mask = <0x01010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea5925..76149b7 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -234,16 +234,15 @@
};
crypto@30000 {
- model = "SEC3";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 5bc09ad..58d2472 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -219,17 +219,15 @@
};
crypto@30000 {
- model = "SEC3";
- device_type = "crypto";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea08..07a69a6 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -234,16 +234,15 @@
};
crypto@30000 {
- model = "SEC3";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 711f9a3..6f845d3 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -219,17 +219,15 @@
};
crypto@30000 {
- model = "SEC3";
- device_type = "crypto";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9f..4d3bab0 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -234,16 +234,15 @@
};
crypto@30000 {
- model = "SEC3";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index c11ceb7..71619c4 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -219,17 +219,15 @@
};
crypto@30000 {
- model = "SEC3";
- device_type = "crypto";
- compatible = "talitos";
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- /* Rev. 3.0 geometry */
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x000001fe>;
- descriptor-types-mask = <0x03ab0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
};
sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 66192aa..4e7b051 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -148,6 +148,17 @@
interrupt-parent = <&mpic>;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6cf533f..7d3829d 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -210,6 +210,17 @@
fsl,has-rstcr;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 205598d..8029407 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -208,6 +208,17 @@
fsl,has-rstcr;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 7c9d0b1..3a91a03 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -148,6 +148,17 @@
interrupt-parent = <&mpic>;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index d7af8db..c81c18c 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -190,16 +190,14 @@
};
crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <0x30000 0xf000>;
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0xfe>;
- descriptor-types-mask = <0x12b0ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
};
mpic: pic@40000 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index a444e6a..fe732f1 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -239,6 +239,18 @@
interrupt-parent = <&mpic>;
};
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b..6013ed8 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -186,19 +186,15 @@
interrupt-parent = <&ipic>;
};
- /* May need to remove if on a part without crypto engine */
crypto@30000 {
- model = "SEC2";
- compatible = "talitos";
+ compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <11 0x8>;
interrupt-parent = <&ipic>;
- num-channels = <4>;
- channel-fifo-len = <24>;
- exec-units-mask = <0x0000007e>;
- /* desc mask is for rev2.0,
- * we need runtime fixup for >2.0 */
- descriptor-types-mask = <0x01010ebf>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
};
/* IPIC
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index d252e38..04a0a55 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -263,6 +263,17 @@
fsl,has-rstcr;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 8241ae3..7ca9a53 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -159,6 +159,17 @@
interrupt-parent = <&mpic>;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 5a57cef..22105ef 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -159,6 +159,17 @@
interrupt-parent = <&mpic>;
};
+ crypto@30000 {
+ compatible = "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x7e>;
+ fsl,descriptor-types-mask = <0x01010ebf>;
+ };
+
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
--
1.5.6
^ permalink raw reply related
* Re: [PATCHv3 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.
From: Jochen Friedrich @ 2008-06-27 16:50 UTC (permalink / raw)
To: Laurent Pinchart; +Cc: Scott Wood, linuxppc-dev list
In-Reply-To: <200806261314.32957.laurentp@cse-semaphore.com>
Hi Laurent,
> Is there any pending issue or can this be applied to powerpc-next ?
Looks OK to me.
>> Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
>> Cc: Jochen Friedrich <jochen@scram.de>
Acked-by: Jochen Friedrich <jochen@scram.de>
Thanks,
Jochen
^ permalink raw reply
* Re: "cell-index" vs. "index" vs. no index in I2C device nodes
From: Jochen Friedrich @ 2008-06-27 16:48 UTC (permalink / raw)
To: Timur Tabi; +Cc: Stefan Roese, linuxppc-dev, Scott Wood
In-Reply-To: <4862BCCF.6040403@freescale.com>
Hi Timur,
> Anyone know when of_i2c.c is going to come "online" replace what's in fsl_soc.c?
There is a patch being prepared to convert i2c-mpc from a platform driver to an of_platform driver
making the fsl_soc.c code obsolete. See: http://patchwork.ozlabs.org/linuxppc/patch?id=18898
Thanks,
Jochen
^ permalink raw reply
* [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform
From: Kumar Gala @ 2008-06-27 16:36 UTC (permalink / raw)
To: linuxppc-dev
There isn't any reason at this point that we can't build 83xx & 86xx support
in with the other 6xx based boards. Twiddle the Kconfigs to allow this.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/platforms/83xx/Kconfig | 10 ++++++----
arch/powerpc/platforms/86xx/Kconfig | 16 +++++++++++-----
arch/powerpc/platforms/Kconfig | 14 --------------
3 files changed, 17 insertions(+), 23 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index fe75b2a..27d9bf8 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,10 +1,12 @@
-menuconfig MPC83xx
- bool "83xx Board Type"
- depends on PPC_83xx
+menuconfig PPC_83xx
+ bool "83xx-based boards"
+ depends on 6xx && PPC_MULTIPLATFORM
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
+ select FSL_SOC
+ select IPIC
-if MPC83xx
+if PPC_83xx
config MPC831x_RDB
bool "Freescale MPC831x RDB"
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a..80a81e0 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,13 @@
-choice
- prompt "86xx Board Type"
- depends on PPC_86xx
- default MPC8641_HPCN
+config PPC_86xx
+menuconfig PPC_86xx
+ bool "86xx-based boards"
+ depends on 6xx && PPC_MULTIPLATFORM
+ select FSL_SOC
+ select ALTIVEC
+ help
+ The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
config MPC8641_HPCN
bool "Freescale MPC8641 HPCN"
@@ -24,7 +30,7 @@ config MPC8610_HPCD
help
This option enables support for the MPC8610 HPCD board.
-endchoice
+endif
config MPC8641
bool
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c5..3e2b645 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -16,20 +16,6 @@ config PPC_82xx
bool "Freescale 82xx"
depends on 6xx
-config PPC_83xx
- bool "Freescale 83xx"
- depends on 6xx
- select FSL_SOC
- select MPC83xx
- select IPIC
-
-config PPC_86xx
- bool "Freescale 86xx"
- depends on 6xx
- select FSL_SOC
- select ALTIVEC
- help
- The Freescale E600 SoCs have 74xx cores.
endchoice
config CLASSIC32
--
1.5.5.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox