* Re: [PATCH] dtc: give advance warning that "-S" is going away.
From: Jon Loeliger @ 2008-07-31 15:43 UTC (permalink / raw)
To: Paul Gortmaker; +Cc: linuxppc-dev, devicetree-discuss
In-Reply-To: <1217426356-1248-1-git-send-email-paul.gortmaker@windriver.com>
> The "-S" option allowed the specification of a minimum size for
> the blob, however the main reason for caring about the size is
> so there is enough padding to add a chosen node by u-boot or
> whoever. In which case, folks don't really care about the absolute
> size, but rather the size of the padding added for this -- which
> is what the "-p" option does. Having the "-S" just confuses people.
>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Applied.
jdl
^ permalink raw reply
* Re: dtc: Remove unused lexer function
From: Jon Loeliger @ 2008-07-31 15:39 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-dev
In-Reply-To: <20080729045136.GD19856@yookeroo.seuss>
> dtc does not use the input() function in flex. Apparently on some gcc
> versions the unused function will cause warnings. Therefore, this
> patch removes the function by using the 'noinput' option to flex.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Applied.
jdl
^ permalink raw reply
* Re: libfdt: Forgot one function when cleaning the namespace
From: Jon Loeliger @ 2008-07-31 15:38 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-dev
In-Reply-To: <20080729045122.GC19856@yookeroo.seuss>
> In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
> libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
> chance of collisions with things from whatever package libfdt is
> embedded in, pulled into the libfdt build via that environment's
> libfdt_env.h.
>
> Except... I missed one. This patch applies the same treatment to
> _stringlist_contains(). While we're at it, also make it static since
> it's only used in the same file.
>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Applied.
jdl
^ permalink raw reply
* Re: [PATCH 2/5] x86: Define elfcorehdr_addr in arch dependent section
From: Ingo Molnar @ 2008-07-31 15:29 UTC (permalink / raw)
To: Vivek Goyal
Cc: Tony Luck, linux-ia64, Paul Mundt, kexec, linux-kernel,
linuxppc-dev, Terry Loftin, Simon Horman, Paul Mackerras,
Eric W. Biederman, Andrew Morton, Linus Torvalds
In-Reply-To: <20080728211156.GB9985@redhat.com>
* Vivek Goyal <vgoyal@redhat.com> wrote:
> o Move elfcorehdr_addr definition in arch dependent crash dump file. This is
> equivalent to defining elfcorehdr_addr under CONFIG_CRASH_DUMP instead of
> CONFIG_PROC_VMCORE. This is needed by is_kdump_kernel() which can be
> used irrespective of the fact whether CONFIG_PROC_VMCORE is enabled or
> not.
>
> Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
> ---
>
> arch/x86/kernel/crash_dump_32.c | 3 +++
> arch/x86/kernel/crash_dump_64.c | 3 +++
> arch/x86/kernel/setup.c | 8 +++++++-
> 3 files changed, 13 insertions(+), 1 deletion(-)
the x86 bits look fine to me.
Acked-by: Ingo Molnar <mingo@elte.hu>
Ingo
^ permalink raw reply
* Re: [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks
From: Michael Ellerman @ 2008-07-31 14:32 UTC (permalink / raw)
To: Mel Gorman
Cc: Nick Piggin, linux-mm, libhugetlbfs-devel, linux-kernel,
linuxppc-dev, Eric Munson, Andrew Morton
In-Reply-To: <20080731135016.GG1704@csn.ul.ie>
[-- Attachment #1: Type: text/plain, Size: 2059 bytes --]
On Thu, 2008-07-31 at 14:50 +0100, Mel Gorman wrote:
> On (31/07/08 21:51), Nick Piggin didst pronounce:
> > On Thursday 31 July 2008 21:27, Mel Gorman wrote:
> > > On (31/07/08 16:26), Nick Piggin didst pronounce:
> >
> > > > I imagine it should be, unless you're using a CPU with seperate TLBs for
> > > > small and huge pages, and your large data set is mapped with huge pages,
> > > > in which case you might now introduce *new* TLB contention between the
> > > > stack and the dataset :)
> > >
> > > Yes, this can happen particularly on older CPUs. For example, on my
> > > crash-test laptop the Pentium III there reports
> > >
> > > TLB and cache info:
> > > 01: Instruction TLB: 4KB pages, 4-way set assoc, 32 entries
> > > 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries
> >
> > Oh? Newer CPUs tend to have unified TLBs?
> >
>
> I've seen more unified DTLBs (ITLB tends to be split) than not but it could
> just be where I'm looking. For example, on the machine I'm writing this
> (Core Duo), it's
>
> TLB and cache info:
> 51: Instruction TLB: 4KB and 2MB or 4MB pages, 128 entries
> 5b: Data TLB: 4KB and 4MB pages, 64 entries
>
> DTLB is unified there but on my T60p laptop where I guess they want the CPU
> to be using less power and be cheaper, it's
>
> TLB info
> Instruction TLB: 4K pages, 4-way associative, 128 entries.
> Instruction TLB: 4MB pages, fully associative, 2 entries
> Data TLB: 4K pages, 4-way associative, 128 entries.
> Data TLB: 4MB pages, 4-way associative, 8 entries
Clearly I've been living under a rock, but I didn't know one could get
such nicely formatted info.
In case I'm not the only one, a bit of googling turned up "x86info",
courtesy of davej - apt-get'able and presumably yum'able too.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Lost time?
From: - Reyneke @ 2008-07-31 14:30 UTC (permalink / raw)
To: linuxppc-embedded
Hi everyone=2C
After a move from the ppc (v2.6.19) branch to the powerpc (v2.6.25) we've s=
potted a bit of an annoying problem. It looks like we loosing system time o=
n a running system. About 0.6sec per minute.
It's not hardware=2C Old kernel was rock solid with regards to time. Even w=
ith a stripped down kernel (minimum device drivers=2C modules=2C and IRQ's)=
we still see time loss. During kernel debug all tick calculations looks re=
asonable.
Anyone have any ideas=2C obvious suspects=2C or pointers where to go and lo=
ok?
Hardware is a 500Mhz ppc 440EPx based system.
Regards
_________________________________________________________________
100=92s of Nikon cameras to be won with Live Search
http://clk.atdmt.com/UKM/go/101719808/direct/01/=
^ permalink raw reply
* RE: Compact Flash on 8349mITX
From: Sparks, Sam @ 2008-07-31 14:24 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <6011A7C9CD0EE74792C3ED2A835560861FA9C0@mail.twacs.com>
>From: Sparks, Sam=20
>Sent: Thursday, July 31, 2008 8:15 AM
>Does irq polling need to be used for compact flash to work=20
>with this version of the kernel on this board?
When I remove the interrupt definition from the DTS (to cause
irqpolling), the ata driver gets stuck in a loop displaying the
following. Does anyone have any insight?
ata1.00: status: { DRDY }
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=3D0x4)
ata1.00: revalidation failed (errno=3D-5)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus
error)
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Sebastien Dugue @ 2008-07-31 14:14 UTC (permalink / raw)
To: michael
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <1217511566.19050.26.camel@localhost>
On Thu, 31 Jul 2008 23:39:26 +1000 Michael Ellerman <michael@ellerman.id.au=
> wrote:
> On Thu, 2008-07-31 at 15:26 +0200, Sebastien Dugue wrote:
> > On Thu, 31 Jul 2008 23:01:39 +1000 Michael Ellerman <michael@ellerman.i=
d.au> wrote:
> >=20
> > > On Thu, 2008-07-31 at 22:58 +1000, Michael Ellerman wrote:
> > > > On Thu, 2008-07-31 at 14:00 +0200, Sebastien Dugue wrote:
> > > > > On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@elle=
rman.id.au> wrote:
> > > > > >=20
> > > > > > This boot ordering stuff is pretty hairy, so I might have missed
> > > > > > something, but this is how the code is ordered AFAICT:
> > > > > > =EF=BB=BF
> > > > > > start_kernel()
> > > > > > init_IRQ()
> > > > > > ...
> > > > > > local_irq_enable()
> > > > > > ...
> > > > > > rest_init()
> > > > > > kernel_thread()
> > > > > > kernel_init()
> > > > > > smp_prepare_cpus()
> > > > > > smp_xics_probe() (via smp_ops->probe())
> > > > > >=20
> > > > > >=20
> > > > > > What's stopping us from taking an irq between local_irq_enable(=
) and
> > > > > > smp_xics_probe() ? Is it just that no one's request_irq()'ed t=
hem yet?
> > > > >=20
> > > > > It's hairy, I agree, but as you've mentioned no one has done a =
request_irq()
> > > > > at that point. The first one to do it is smp_xics_probe() for the=
IPI.
> > > >=20
> > > > Hmm, I don't think that's strong enough. I can trivially cause irqs=
to
> > > > fire during a kexec reboot just by mashing the keyboard.
> > > >=20
> > > > And during a kdump boot all sorts of stuff could be firing. Even du=
ring
> > > > a clean boot, from firmware, I don't think we can guarantee that
> > > > nothing's going to fire.
> > > >=20
> > > > .. after a bit of testing ..
> > > >=20
> > > > It seems it actually works (sort of).=20
> > > >=20
> > > > xics_remap_irq() calls irq_radix_revmap_lookup(), which calls:
> > > >=20
> > > > ptr =3D radix_tree_lookup(&host->revmap_data.tree, hwirq);
> > > >=20
> > > > And because =EF=BB=BFhost->revmap_data.tree was zalloc'ed we trip o=
n the first
> > > > check here:
> > >=20
> > > @#$% ctrl-enter =3D=3D send!
> > >=20
> > > Continuing ...
> > >=20
> > > void *radix_tree_lookup(struct radix_tree_root *root, unsigned long i=
ndex)
> > > {
> > > unsigned int height, shift;
> > > struct radix_tree_node *node, **slot;
> > >=20
> > > node =3D rcu_dereference(root->rnode);
> > > if (node =3D=3D NULL)
> > > return NULL;
> > >=20
> > > Which means =EF=BB=BFirq_radix_revmap_lookup() will return NO_IRQ, wh=
ich is cool.
> >=20
> > Which is what I intended so that as long as no IRQ is registered we
> > return NO_IRQ.
> >=20
> > >=20
> > >=20
> > > So I think it can fly, as long as we're happy that we can't reverse m=
ap
> > > anything until smp_xics_probe() - and I think that's true, as any irq=
we
> > > take will be invalid.
> >=20
> > That's true as no IRQs are registered before smp_xics_probe() and for=
any
> > interrupt we might get before that, irq_radix_revmap_lookup() will retu=
rn
> > NO_IRQ.
>=20
> Cool, we agree :)=20
>=20
> My only worry is that we might be relying on on the particular radix
> tree implementation a bit too much.
Well maybe we could revert back to testing a flag just like we
do for host->revmap_data.tree.gfp_mask !=3D 0. Dunno.
> Is it documented somewhere that
> the /very/ first check is for =EF=BB=BFroot->rnode !=3D NULL, and the res=
t of the
> root may be unintialised?
Not in anything I could read except in looking at the code.
>=20
> And I think it needs a big fat comment in the irq code saying that it's
> safe because revmap_data is zalloc'ed, and that means the radix lookup
> will fail (safely).
Yep, right. Will advertise this properly for the next round if this
remains the prefered solution.
Thanks,
Sebastien.
^ permalink raw reply
* Re: [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks
From: Mel Gorman @ 2008-07-31 13:50 UTC (permalink / raw)
To: Nick Piggin
Cc: linux-mm, libhugetlbfs-devel, linux-kernel, linuxppc-dev,
Eric Munson, Andrew Morton
In-Reply-To: <200807312151.56847.nickpiggin@yahoo.com.au>
On (31/07/08 21:51), Nick Piggin didst pronounce:
> On Thursday 31 July 2008 21:27, Mel Gorman wrote:
> > On (31/07/08 16:26), Nick Piggin didst pronounce:
>
> > > I imagine it should be, unless you're using a CPU with seperate TLBs for
> > > small and huge pages, and your large data set is mapped with huge pages,
> > > in which case you might now introduce *new* TLB contention between the
> > > stack and the dataset :)
> >
> > Yes, this can happen particularly on older CPUs. For example, on my
> > crash-test laptop the Pentium III there reports
> >
> > TLB and cache info:
> > 01: Instruction TLB: 4KB pages, 4-way set assoc, 32 entries
> > 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries
>
> Oh? Newer CPUs tend to have unified TLBs?
>
I've seen more unified DTLBs (ITLB tends to be split) than not but it could
just be where I'm looking. For example, on the machine I'm writing this
(Core Duo), it's
TLB and cache info:
51: Instruction TLB: 4KB and 2MB or 4MB pages, 128 entries
5b: Data TLB: 4KB and 4MB pages, 64 entries
DTLB is unified there but on my T60p laptop where I guess they want the CPU
to be using less power and be cheaper, it's
TLB info
Instruction TLB: 4K pages, 4-way associative, 128 entries.
Instruction TLB: 4MB pages, fully associative, 2 entries
Data TLB: 4K pages, 4-way associative, 128 entries.
Data TLB: 4MB pages, 4-way associative, 8 entries
So I would expect huge pages to be slower there than in other cases.
On one Xeon, I see 32 entries for huge pages and 256 for small pages so
it's not straight-forward to predict. On another Xeon, I see the DLB is 64
entries unified.
To make all this more complex, huge pages can be a win because less L2 cache
is consumed on page table information. The gains are due to fewer access to
main memory and less to do with TLB misses. So lets say we do have a TLB
that is set-associative with very few large page entries, it could still
end up winning because the increased usage of L2 offset the increased TLB
misses. Predicting when huge pages are a win and when they are a loss is
just not particularly straight-forward.
>
> > > Also, interestingly I have actually seen some CPUs whos memory operations
> > > get significantly slower when operating on large pages than small (in the
> > > case when there is full TLB coverage for both sizes). This would make
> > > sense if the CPU only implements a fast L1 TLB for small pages.
> >
> > It's also possible there is a micro-TLB involved that only support small
> > pages.
>
> That is the case on a couple of contemporary CPUs I've tested with
> (although granted they are engineering samples, but I don't expect
> that to be the cause)
>
I found it hard to determine if the CPU I was using at a uTLB or not. The
manuals didn't cover the subject but it was a theory as to why large pages
might be slower on a particular CPU. Whatever the reason, I'm ok
admitting that large pages can be slower on smaller data sets and in
other situations for whatever reason. It's not a major surprise.
>
> > > So for the vast majority of workloads, where stacks are relatively small
> > > (or slowly changing), and relatively hot, I suspect this could easily
> > > have no benefit at best and slowdowns at worst.
> >
> > I wouldn't expect an application with small stacks to request its stack
> > to be backed by hugepages either. Ideally, it would be enabled because a
> > large enough number of DTLB misses were found to be in the stack
> > although catching this sort of data is tricky.
>
> Sure, as I said, I have nothing against this functionality just because
> it has the possibility to cause a regression. I was just pointing out
> there are a few possibilities there, so it will take a particular type
> of app to take advantage of it. Ie. it is not something you would ever
> just enable "just in case the stack starts thrashing the TLB".
>
No, it's something you'd enable because you know your app is using a lot
of stack. If you are lazy, you might do a test run of the app with it
enabled for the sake of curiousity and take the option that's faster :)
>
> > > But I'm not saying that as a reason not to merge it -- this is no
> > > different from any other hugepage allocations and as usual they have to
> > > be used selectively where they help.... I just wonder exactly where huge
> > > stacks will help.
> >
> > Benchmark wise, SPECcpu and SPEComp have stack-dependent benchmarks.
> > Computations that partition problems with recursion I would expect to
> > benefit as well as some JVMs that heavily use the stack (see how many docs
> > suggest setting ulimit -s unlimited). Bit out there, but stack-based
> > languages would stand to gain by this. The potential gap is for threaded
> > apps as there will be stacks that are not the "main" stack. Backing those
> > with hugepages depends on how they are allocated (malloc, it's easy,
> > MAP_ANONYMOUS not so much).
>
> Oh good, then there should be lots of possibilities to demonstrate it.
>
There should :)
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Michael Ellerman @ 2008-07-31 13:39 UTC (permalink / raw)
To: Sebastien Dugue
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <20080731152606.5ae7c379@bull.net>
[-- Attachment #1: Type: text/plain, Size: 3498 bytes --]
On Thu, 2008-07-31 at 15:26 +0200, Sebastien Dugue wrote:
> On Thu, 31 Jul 2008 23:01:39 +1000 Michael Ellerman <michael@ellerman.id.au> wrote:
>
> > On Thu, 2008-07-31 at 22:58 +1000, Michael Ellerman wrote:
> > > On Thu, 2008-07-31 at 14:00 +0200, Sebastien Dugue wrote:
> > > > On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman.id.au> wrote:
> > > > >
> > > > > This boot ordering stuff is pretty hairy, so I might have missed
> > > > > something, but this is how the code is ordered AFAICT:
> > > > >
> > > > > start_kernel()
> > > > > init_IRQ()
> > > > > ...
> > > > > local_irq_enable()
> > > > > ...
> > > > > rest_init()
> > > > > kernel_thread()
> > > > > kernel_init()
> > > > > smp_prepare_cpus()
> > > > > smp_xics_probe() (via smp_ops->probe())
> > > > >
> > > > >
> > > > > What's stopping us from taking an irq between local_irq_enable() and
> > > > > smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
> > > >
> > > > It's hairy, I agree, but as you've mentioned no one has done a request_irq()
> > > > at that point. The first one to do it is smp_xics_probe() for the IPI.
> > >
> > > Hmm, I don't think that's strong enough. I can trivially cause irqs to
> > > fire during a kexec reboot just by mashing the keyboard.
> > >
> > > And during a kdump boot all sorts of stuff could be firing. Even during
> > > a clean boot, from firmware, I don't think we can guarantee that
> > > nothing's going to fire.
> > >
> > > .. after a bit of testing ..
> > >
> > > It seems it actually works (sort of).
> > >
> > > xics_remap_irq() calls irq_radix_revmap_lookup(), which calls:
> > >
> > > ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
> > >
> > > And because host->revmap_data.tree was zalloc'ed we trip on the first
> > > check here:
> >
> > @#$% ctrl-enter == send!
> >
> > Continuing ...
> >
> > void *radix_tree_lookup(struct radix_tree_root *root, unsigned long index)
> > {
> > unsigned int height, shift;
> > struct radix_tree_node *node, **slot;
> >
> > node = rcu_dereference(root->rnode);
> > if (node == NULL)
> > return NULL;
> >
> > Which means irq_radix_revmap_lookup() will return NO_IRQ, which is cool.
>
> Which is what I intended so that as long as no IRQ is registered we
> return NO_IRQ.
>
> >
> >
> > So I think it can fly, as long as we're happy that we can't reverse map
> > anything until smp_xics_probe() - and I think that's true, as any irq we
> > take will be invalid.
>
> That's true as no IRQs are registered before smp_xics_probe() and for any
> interrupt we might get before that, irq_radix_revmap_lookup() will return
> NO_IRQ.
Cool, we agree :)
My only worry is that we might be relying on on the particular radix
tree implementation a bit too much. Is it documented somewhere that
the /very/ first check is for root->rnode != NULL, and the rest of the
root may be unintialised?
And I think it needs a big fat comment in the irq code saying that it's
safe because revmap_data is zalloc'ed, and that means the radix lookup
will fail (safely).
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Sebastien Dugue @ 2008-07-31 13:26 UTC (permalink / raw)
To: michael
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <1217509299.19050.15.camel@localhost>
On Thu, 31 Jul 2008 23:01:39 +1000 Michael Ellerman <michael@ellerman.id.au=
> wrote:
> On Thu, 2008-07-31 at 22:58 +1000, Michael Ellerman wrote:
> > On Thu, 2008-07-31 at 14:00 +0200, Sebastien Dugue wrote:
> > > On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman=
.id.au> wrote:
> > > >=20
> > > > This boot ordering stuff is pretty hairy, so I might have missed
> > > > something, but this is how the code is ordered AFAICT:
> > > > =EF=BB=BF
> > > > start_kernel()
> > > > init_IRQ()
> > > > ...
> > > > local_irq_enable()
> > > > ...
> > > > rest_init()
> > > > kernel_thread()
> > > > kernel_init()
> > > > smp_prepare_cpus()
> > > > smp_xics_probe() (via smp_ops->probe())
> > > >=20
> > > >=20
> > > > What's stopping us from taking an irq between local_irq_enable() and
> > > > smp_xics_probe() ? Is it just that no one's request_irq()'ed them =
yet?
> > >=20
> > > It's hairy, I agree, but as you've mentioned no one has done a requ=
est_irq()
> > > at that point. The first one to do it is smp_xics_probe() for the IPI.
> >=20
> > Hmm, I don't think that's strong enough. I can trivially cause irqs to
> > fire during a kexec reboot just by mashing the keyboard.
> >=20
> > And during a kdump boot all sorts of stuff could be firing. Even during
> > a clean boot, from firmware, I don't think we can guarantee that
> > nothing's going to fire.
> >=20
> > .. after a bit of testing ..
> >=20
> > It seems it actually works (sort of).=20
> >=20
> > xics_remap_irq() calls irq_radix_revmap_lookup(), which calls:
> >=20
> > ptr =3D radix_tree_lookup(&host->revmap_data.tree, hwirq);
> >=20
> > And because =EF=BB=BFhost->revmap_data.tree was zalloc'ed we trip on th=
e first
> > check here:
>=20
> @#$% ctrl-enter =3D=3D send!
>=20
> Continuing ...
>=20
> void *radix_tree_lookup(struct radix_tree_root *root, unsigned long index)
> {
> unsigned int height, shift;
> struct radix_tree_node *node, **slot;
>=20
> node =3D rcu_dereference(root->rnode);
> if (node =3D=3D NULL)
> return NULL;
>=20
> Which means =EF=BB=BFirq_radix_revmap_lookup() will return NO_IRQ, which =
is cool.
Which is what I intended so that as long as no IRQ is registered we
return NO_IRQ.
>=20
>=20
> So I think it can fly, as long as we're happy that we can't reverse map
> anything until smp_xics_probe() - and I think that's true, as any irq we
> take will be invalid.
That's true as no IRQs are registered before smp_xics_probe() and for any
interrupt we might get before that, irq_radix_revmap_lookup() will return
NO_IRQ.
Thanks,
Sebastien.
^ permalink raw reply
* Compact Flash on 8349mITX
From: Sparks, Sam @ 2008-07-31 13:14 UTC (permalink / raw)
To: linuxppc-dev
Hello All,
I'm using the latest 2.2.26 kernel image from
linux/kernel/git/benh/powerpc.git on a mpc8349mITX, and trying to get
Compact Flash to work. The kernel booted fine, but I was surprised to
see Compact Flash IRQ was not being handled. Does irq polling need to be
used for compact flash to work with this version of the kernel on this
board?
Here's snip of the unhandled IRQ, for your edification.
irq 23: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[cf829a30] [c00087d4] 0xc00087d4 (unreliable)
[cf829a60] [c0052844] 0xc0052844
[cf829a80] [c0052ac4] 0xc0052ac4
[cf829ac0] [c0053520] 0xc0053520
[cf829ad0] [c000581c] 0xc000581c
[cf829ae0] [c0012adc] 0xc0012adc
--- Exception: 501 at 0xc002f1e0
LR =3D 0xc00058c8
[cf829ba0] [c02d4ef8] 0xc02d4ef8 (unreliable)
[cf829bd0] [c00058c8] 0xc00058c8
[cf829be0] [c002f394] 0xc002f394
[cf829bf0] [c0005820] 0xc0005820
[cf829c00] [c0012adc] 0xc0012adc
--- Exception: 501 at 0xc0052450
LR =3D 0xc0052574
[cf829cf0] [c00527e0] 0xc00527e0
[cf829d20] [c0053a04] 0xc0053a04
[cf829d40] [c01a7d88] 0xc01a7d88
[cf829d70] [c029a5bc] 0xc029a5bc
[cf829db0] [c029a8b4] 0xc029a8b4
[cf829e40] [c0202d10] 0xc0202d10
[cf829e60] [c017ab60] 0xc017ab60
[cf829e80] [c017ad6c] 0xc017ad6c
[cf829ea0] [c0179758] 0xc0179758
[cf829ed0] [c017adc4] 0xc017adc4
[cf829ee0] [c017a180] 0xc017a180
[cf829f10] [c017b39c] 0xc017b39c
[cf829f30] [c0202f80] 0xc0202f80
[cf829f40] [c0320750] 0xc0320750
[cf829f50] [c03007ac] 0xc03007ac
[cf829fd0] [c0300994] 0xc0300994
[cf829ff0] [c0012268] 0xc0012268
handlers:
[<c01b35c0>]
Disabling IRQ #23
Thanks for the help,
Sam
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Michael Ellerman @ 2008-07-31 13:01 UTC (permalink / raw)
To: Sebastien Dugue
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <1217509104.19050.11.camel@localhost>
[-- Attachment #1: Type: text/plain, Size: 2397 bytes --]
On Thu, 2008-07-31 at 22:58 +1000, Michael Ellerman wrote:
> On Thu, 2008-07-31 at 14:00 +0200, Sebastien Dugue wrote:
> > On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman.id.au> wrote:
> > >
> > > This boot ordering stuff is pretty hairy, so I might have missed
> > > something, but this is how the code is ordered AFAICT:
> > >
> > > start_kernel()
> > > init_IRQ()
> > > ...
> > > local_irq_enable()
> > > ...
> > > rest_init()
> > > kernel_thread()
> > > kernel_init()
> > > smp_prepare_cpus()
> > > smp_xics_probe() (via smp_ops->probe())
> > >
> > >
> > > What's stopping us from taking an irq between local_irq_enable() and
> > > smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
> >
> > It's hairy, I agree, but as you've mentioned no one has done a request_irq()
> > at that point. The first one to do it is smp_xics_probe() for the IPI.
>
> Hmm, I don't think that's strong enough. I can trivially cause irqs to
> fire during a kexec reboot just by mashing the keyboard.
>
> And during a kdump boot all sorts of stuff could be firing. Even during
> a clean boot, from firmware, I don't think we can guarantee that
> nothing's going to fire.
>
> .. after a bit of testing ..
>
> It seems it actually works (sort of).
>
> xics_remap_irq() calls irq_radix_revmap_lookup(), which calls:
>
> ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
>
> And because host->revmap_data.tree was zalloc'ed we trip on the first
> check here:
@#$% ctrl-enter == send!
Continuing ...
void *radix_tree_lookup(struct radix_tree_root *root, unsigned long index)
{
unsigned int height, shift;
struct radix_tree_node *node, **slot;
node = rcu_dereference(root->rnode);
if (node == NULL)
return NULL;
Which means irq_radix_revmap_lookup() will return NO_IRQ, which is cool.
So I think it can fly, as long as we're happy that we can't reverse map
anything until smp_xics_probe() - and I think that's true, as any irq we
take will be invalid.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* ePAPR 1.0 is published
From: Yoder Stuart @ 2008-07-31 12:59 UTC (permalink / raw)
To: devicetree-discuss, linuxppc-dev
The ePAPR 1.0 spec is officially published and available
on the power.org website.
<http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf>
One purpose of the spec is to more formally specify in one place the
flat device tree concept defined booting_without_of.txt plus the
relevant parts of 1275 and misc bindings created by the OF working
group.
It also contains a specification for how multicore boot works in
an ePAPR-compliant system.
Stuart Yoder
Freescale
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Michael Ellerman @ 2008-07-31 12:58 UTC (permalink / raw)
To: Sebastien Dugue
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <20080731140002.31bbe4a0@bull.net>
[-- Attachment #1: Type: text/plain, Size: 1690 bytes --]
On Thu, 2008-07-31 at 14:00 +0200, Sebastien Dugue wrote:
> On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman.id.au> wrote:
> >
> > This boot ordering stuff is pretty hairy, so I might have missed
> > something, but this is how the code is ordered AFAICT:
> >
> > start_kernel()
> > init_IRQ()
> > ...
> > local_irq_enable()
> > ...
> > rest_init()
> > kernel_thread()
> > kernel_init()
> > smp_prepare_cpus()
> > smp_xics_probe() (via smp_ops->probe())
> >
> >
> > What's stopping us from taking an irq between local_irq_enable() and
> > smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
>
> It's hairy, I agree, but as you've mentioned no one has done a request_irq()
> at that point. The first one to do it is smp_xics_probe() for the IPI.
Hmm, I don't think that's strong enough. I can trivially cause irqs to
fire during a kexec reboot just by mashing the keyboard.
And during a kdump boot all sorts of stuff could be firing. Even during
a clean boot, from firmware, I don't think we can guarantee that
nothing's going to fire.
.. after a bit of testing ..
It seems it actually works (sort of).
xics_remap_irq() calls irq_radix_revmap_lookup(), which calls:
ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
And because host->revmap_data.tree was zalloc'ed we trip on the first
check here:
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [BUILD-FAILURE] 2.6.27-rc1-mm1 - allyesconfig build fails on powerpc
From: Kamalesh Babulal @ 2008-07-31 12:43 UTC (permalink / raw)
To: Andrew Morton
Cc: linuxppc-dev, Kernel Testers List, Sam Ravnborg, linux-kernel
In-Reply-To: <20080731000354.24b55d5b.akpm@linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 5359 bytes --]
Hi Andrew,
make allyesconfig with 2.6.27-rc1-mm1 kernel on powerpc fails with build error
LD .tmp_vmlinux1
ld: drivers/built-in.o section .devexit.text exceeds stub group size
ld: sound/built-in.o section .devinit.text exceeds stub group size
ld: drivers/built-in.o section .devinit.text exceeds stub group size
ld: net/built-in.o section .exit.text exceeds stub group size
ld: drivers/built-in.o section .exit.text exceeds stub group size
ld: net/built-in.o section .init.text exceeds stub group size
ld: sound/built-in.o section .init.text exceeds stub group size
ld: drivers/built-in.o section .init.text exceeds stub group size
ld: fs/built-in.o section .init.text exceeds stub group size
ld: mm/built-in.o section .init.text exceeds stub group size
ld: kernel/built-in.o section .init.text exceeds stub group size
ld: arch/powerpc/platforms/built-in.o section .init.text exceeds stub group size
ld: arch/powerpc/kernel/built-in.o section .init.text exceeds stub group size
ld: init/built-in.o section .init.text exceeds stub group size
ld: kernel/built-in.o section .sched.text exceeds stub group size
ld: net/built-in.o section .text exceeds stub group size
ld: arch/powerpc/oprofile/built-in.o section .text exceeds stub group size
ld: sound/built-in.o section .text exceeds stub group size
ld: drivers/built-in.o section .text exceeds stub group size
ld: lib/built-in.o section .text exceeds stub group size
ld: tests/built-in.o section .text exceeds stub group size
ld: block/built-in.o section .text exceeds stub group size
ld: crypto/built-in.o section .text exceeds stub group size
ld: security/built-in.o section .text exceeds stub group size
ld: ipc/built-in.o section .text exceeds stub group size
ld: fs/built-in.o section .text exceeds stub group size
ld: mm/built-in.o section .text exceeds stub group size
ld: kernel/built-in.o section .text exceeds stub group size
ld: arch/powerpc/xmon/built-in.o section .text exceeds stub group size
ld: arch/powerpc/platforms/built-in.o section .text exceeds stub group size
ld: arch/powerpc/sysdev/built-in.o section .text exceeds stub group size
ld: arch/powerpc/mm/built-in.o section .text exceeds stub group size
ld: arch/powerpc/kernel/built-in.o section .text exceeds stub group size
ld: arch/powerpc/kernel/head_64.o section .text exceeds stub group size
drivers/built-in.o: In function `usb_cleanup':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:846: relocation truncated to fit: R_PPC64_REL24 against symbol `.kfree' defined in .text section in mm/built-in.o
drivers/built-in.o: In function `get_icons':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:692: relocation truncated to fit: R_PPC64_REL24 against symbol `.up_read' defined in .text section in kernel/built-in.o
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:699: relocation truncated to fit: R_PPC64_REL24 against symbol `.sprintf' defined in .text section in lib/lib.a(vsprintf.o)
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:703: relocation truncated to fit: R_PPC64_REL24 against symbol `.up_read' defined in .text section in kernel/built-in.o
drivers/built-in.o: In function `usb_disconnect':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:858: relocation truncated to fit: R_PPC64_REL24 against symbol `.up_write' defined in .text section in kernel/built-in.o
drivers/built-in.o: In function `usb_make_path':
/tmp/linux-2.6.27-rc1/include/linux/usb.h:611: relocation truncated to fit: R_PPC64_REL24 against symbol `.snprintf' defined in .text section in lib/lib.a(vsprintf.o)
drivers/built-in.o: In function `usb_probe':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:947: relocation truncated to fit: R_PPC64_REL24 against symbol `.strlcat' defined in .text section in lib/lib.a(string.o)
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:987: relocation truncated to fit: R_PPC64_REL24 against symbol `.sysfs_create_group' defined in .text section in fs/built-in.o
drivers/built-in.o: In function `input_open':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:511: relocation truncated to fit: R_PPC64_REL24 against symbol `._mcount' defined in .text section in arch/powerpc/kernel/entry_64.o
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:525: relocation truncated to fit: R_PPC64_REL24 against symbol `.memset' defined in .text section in arch/powerpc/lib/built-in.o
drivers/built-in.o: In function `urb_irq_callback':
/tmp/linux-2.6.27-rc1/drivers/input/misc/yealink.c:427: additional relocation overflows omitted from the output
make: *** [.tmp_vmlinux1] Error 1
# ld -v
GNU ld version 2.17.50.0.6-5.el5 20061020
# gcc -v
Using built-in specs.
Target: ppc64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran --enable-java-awt=gtk --disable-dssi --enable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --enable-secureplt --with-long-double-128 --host=ppc64-redhat-linux --build=ppc64-redhat-linux --target=ppc64-redhat-linux --with-cpu=default32
Thread model: posix
gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
[-- Attachment #2: config-ppc64-2.6.26.rc1-mm1 --]
[-- Type: text/plain, Size: 86646 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc1-mm1
# Thu Jul 31 06:08:37 2008
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_GET_USER_PAGES_FAST=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MM_OWNER=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEMRLIMIT_CTLR=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_IGMP=y
CONFIG_FILE_LOCKING=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_CLK is not set
#
# GCOV profiling
#
CONFIG_GCOV_PROFILE=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SCANLOG=y
CONFIG_LPARCFG=y
CONFIG_PPC_PSERIES_DEBUG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=y
CONFIG_PPC_ISERIES=y
#
# iSeries device drivers
#
CONFIG_VIODASD=y
CONFIG_VIOCD=y
CONFIG_VIOTAPE=y
CONFIG_VIOPATH=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE=y
CONFIG_PPC_PASEMI_MDIO=y
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
CONFIG_PS3_ADVANCED=y
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_DYNAMIC_DMA=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_DISK=y
CONFIG_PS3_ROM=y
CONFIG_PS3_FLASH=y
CONFIG_PS3_LPM=y
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_CELLEB=y
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
CONFIG_SPU_TRACE=y
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_PPC_IBM_CELL_RESETBUTTON=y
CONFIG_PPC_IBM_CELL_POWERBUTTON=y
CONFIG_CBE_THERM=y
CONFIG_CBE_CPUFREQ=y
CONFIG_CBE_CPUFREQ_PMI=y
CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=y
CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_PPC_PMI=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_PPC_PASEMI_CPUFREQ=y
CONFIG_AXON_RAM=y
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYP_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_ELECTRA_CF=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_HAS_RAPIDIO is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000002000000
CONFIG_PHYSICAL_START=0x02000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_QUEUE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_ULOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=y
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_NET_DCCPPROBE=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_ECONET=y
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_INGRESS=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_TCPPROBE=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRNET=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y
CONFIG_TOIM3232_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
CONFIG_MCP2120_DONGLE=y
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y
#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_SIGMATEL_FIR=y
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_TKIP_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
CONFIG_MAC80211_LOWTX_FRAME_DUMP=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PCI=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_PASEMI=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_ALAUDA=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=y
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
CONFIG_MTD_UBI_DEBUG=y
CONFIG_MTD_UBI_DEBUG_MSG=y
CONFIG_MTD_UBI_DEBUG_PARANOID=y
CONFIG_MTD_UBI_DEBUG_DISABLE_BGT=y
CONFIG_MTD_UBI_DEBUG_USERSPACE_IO=y
CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS=y
CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES=y
CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES=y
#
# Additional UBI debugging messages
#
CONFIG_MTD_UBI_DEBUG_MSG_BLD=y
CONFIG_MTD_UBI_DEBUG_MSG_EBA=y
CONFIG_MTD_UBI_DEBUG_MSG_WL=y
CONFIG_MTD_UBI_DEBUG_MSG_IO=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=y
CONFIG_EEPROM_93CX6=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_DELKIN=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_CELLEB=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_BROADSAS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_IBMVSCSI=y
CONFIG_SCSI_IBMVSCSIS=y
CONFIG_SCSI_IBMVFC=y
CONFIG_SCSI_IBMVFC_TRACE=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_SRP=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_SCC=y
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_SMU=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
CONFIG_WINDFARM_PM121=y
CONFIG_PMAC_RACKMETER=y
CONFIG_NETDEVICES=y
CONFIG_IFB=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_OF_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_HP100=y
CONFIG_IBMVETH=y
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
CONFIG_IBM_NEW_EMAC_DEBUG=y
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_EEPRO100=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
CONFIG_DE600=y
CONFIG_DE620=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
CONFIG_IGB_LRO=y
CONFIG_NS83820=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_SPIDER_NET=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_EHEA=y
CONFIG_IXGBE=y
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_MYRI10GE=y
CONFIG_NETXEN_NIC=y
CONFIG_NIU=y
CONFIG_PASEMI_MAC=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_SFC=y
CONFIG_TR=y
CONFIG_IBMOL=y
CONFIG_3C359=y
CONFIG_TMS380TR=y
CONFIG_TMSPCI=y
CONFIG_ABYSS=y
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
CONFIG_PCMCIA_WAVELAN=y
CONFIG_PCMCIA_NETWAVE=y
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_AIRO=y
CONFIG_HERMES=y
CONFIG_APPLE_AIRPORT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_ADM8211=y
CONFIG_MAC80211_HWSIM=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_IWLWIFI=y
CONFIG_IWLCORE=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
CONFIG_IWL4965=y
CONFIG_IWL4965_LEDS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWL5000=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWL3945=y
CONFIG_IWL3945_RFKILL=y
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
CONFIG_IWL3945_DEBUG=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_B43=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
CONFIG_B43_DEBUG=y
CONFIG_B43_FORCE_PIO=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_RT2X00=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=y
CONFIG_RT2400PCI_RFKILL=y
CONFIG_RT2400PCI_LEDS=y
CONFIG_RT2500PCI=y
CONFIG_RT2500PCI_RFKILL=y
CONFIG_RT2500PCI_LEDS=y
CONFIG_RT61PCI=y
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2500USB=y
CONFIG_RT2500USB_LEDS=y
CONFIG_RT73USB=y
CONFIG_RT73USB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300=y
CONFIG_PC300_MLPPP=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=y
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ISERIES_VETH=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
CONFIG_ISDN=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=y
CONFIG_HISAX_ELSA_CS=y
CONFIG_HISAX_AVM_A1_CS=y
CONFIG_HISAX_TELES_CS=y
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=y
CONFIG_ISDN_CAPI_CAPIDRV=y
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_AVM_CS=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=y
CONFIG_ISDN_DRV_AVMB1_C4=y
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=y
CONFIG_ISDN_DIVAS_USERIDI=y
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
CONFIG_SX=y
CONFIG_RIO=y
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_ICOM=y
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_ISERIES=y
CONFIG_HVC_RTAS=y
CONFIG_HVC_BEAT=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HVCS=y
CONFIG_IBM_BSR=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PASEMI=y
CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
CONFIG_AT24=y
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8591=y
CONFIG_TPS65010=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=y
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_HWMON_DEBUG_CHIP=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_ALIM7101_WDT=y
CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_HTC_PASIC3=y
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEOBUF_DVB=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TDA9875=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_SAA7111=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_CX25840=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=y
CONFIG_VIDEO_BWQCAM=y
CONFIG_VIDEO_CQCAM=y
CONFIG_VIDEO_W9966=y
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_CPIA_PP=y
CONFIG_VIDEO_CPIA_USB=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_SAA5246A=y
CONFIG_VIDEO_SAA5249=y
CONFIG_TUNER_3036=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
CONFIG_VIDEO_SAA7134_DVB=y
CONFIG_VIDEO_MXB=y
CONFIG_VIDEO_DPC=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_ALSA=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_CX23885=y
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_USBVISION=y
CONFIG_VIDEO_USBVIDEO=y
CONFIG_USB_VICAM=y
CONFIG_USB_IBMCAM=y
CONFIG_USB_KONICAWC=y
CONFIG_USB_QUICKCAM_MESSENGER=y
CONFIG_USB_ET61X251=y
CONFIG_VIDEO_OVCAMCHIP=y
CONFIG_USB_W9968CF=y
CONFIG_USB_OV511=y
CONFIG_USB_SE401=y
CONFIG_USB_SN9C102=y
CONFIG_USB_STV680=y
CONFIG_USB_ZC0301=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
CONFIG_USB_S2255=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_MT9M001_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_MT9V022_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_MAESTRO=y
CONFIG_USB_DSBR=y
CONFIG_USB_SI470X=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_DVB_BUDGET_PATCH=y
#
# Supported USB Adapters
#
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_VP7045=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y
CONFIG_DVB_CINERGYT2=y
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=50
CONFIG_DVB_SIANO_SMS1XXX=y
CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=y
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=y
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TUA6100=y
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_DRX397XD=y
CONFIG_DVB_L64781=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_TDA10048=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_S5H1411=y
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DAB=y
CONFIG_USB_DABUSB=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_OF=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_PS3=y
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
CONFIG_FB_VIRTUAL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_FB_LOGO_EXTRA=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=y
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=y
CONFIG_SND_HDSPM=y
CONFIG_SND_HIFIER=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=y
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_PS3=y
CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_AOA=y
CONFIG_SND_AOA_FABRIC_LAYOUT=y
CONFIG_SND_AOA_ONYX=y
CONFIG_SND_AOA_TAS=y
CONFIG_SND_AOA_TOONIE=y
CONFIG_SND_AOA_SOUNDBUS=y
CONFIG_SND_AOA_SOUNDBUS_I2S=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SOUND_PRIME=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_PCI=y
CONFIG_USB_ISP1760_OF=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP2101=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_AUERSWALD=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=y
CONFIG_USB_PHIDGETSERVO=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_GOTEMP=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_AMD5536UDC=y
CONFIG_USB_AMD5536UDC=y
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_GPIOMMC=y
CONFIG_GPIOMMC_CONFIGFS=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PCA955X=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_EHCA=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_PASEMI=y
CONFIG_EDAC_CELL=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_DMATEST=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_SMX=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
CONFIG_REISER4_DEBUG=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Layered filesystems
#
CONFIG_ECRYPT_FS=y
CONFIG_UNION_FS=y
CONFIG_UNION_FS_XATTR=y
CONFIG_UNION_FS_DEBUG=y
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_DEBUG=y
CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
CONFIG_UBIFS_FS_DEBUG_CHKS=y
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_9P_FS=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
CONFIG_TRACE=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_SYNCHRO_TEST=y
CONFIG_PROFILE_LIKELY=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACING=y
CONFIG_FTRACE=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_SAMPLE_TRACE=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KERNEL_TESTS=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_LKDTM=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_HCALL_STATS=y
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SMACK=y
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_PRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=n
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Sebastien Dugue @ 2008-07-31 12:10 UTC (permalink / raw)
To: Sebastien Dugue
Cc: tinytim, linux-rt-users, linux-kernel, rostedt, jean-pierre.dion,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <20080731140002.31bbe4a0@bull.net>
On Thu, 31 Jul 2008 14:00:02 +0200 Sebastien Dugue <sebastien.dugue@bull.ne=
t> wrote:
>=20
> Hi Michael,
>=20
> On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman.id.=
au> wrote:
>=20
> > On Thu, 2008-07-31 at 11:40 +0200, Sebastien Dugue wrote:
> > > The radix tree used for fast irq reverse mapping by the XICS is initi=
alized
> > > late in the boot process, after the first interrupt (IPI) gets regist=
ered
> > > and after the first IPI is received.
> > >=20
> > > This patch moves the initialization of the XICS radix tree earlier =
into
> > > the boot process in smp_xics_probe() (the mm is already up but no int=
errupts
> > > have been registered at that point) to avoid having to insert a mappi=
ng into
> > > the tree in interrupt context. This will help in simplifying the lock=
ing
> > > constraints and move to a lockless radix tree in subsequent patches.
> > >=20
> > > As a nice side effect, there is no need any longer to check for
> > > (host->revmap_data.tree.gfp_mask !=3D 0) to know if the tree have been
> > > initialized.
> >=20
> > Hi Sebastien,
> >=20
> > This is a nice cleanup, I think :)
>=20
> Thanks.
>=20
> >=20
> > > diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> > > index 6ac8612..0a1445c 100644
> > > --- a/arch/powerpc/kernel/irq.c
> > > +++ b/arch/powerpc/kernel/irq.c
> > > @@ -893,28 +890,28 @@ unsigned int irq_find_mapping(struct irq_host *=
host,
> > > }
> > > EXPORT_SYMBOL_GPL(irq_find_mapping);
> > > =20
> > > +void __init irq_radix_revmap_init(void)
> > > +{
> > > + struct irq_host *h;
> > > +
> > > + list_for_each_entry(h, &irq_hosts, link) {
> > > + if (h->revmap_type =3D=3D IRQ_HOST_MAP_TREE)
> > > + INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
> > > + }
> > > +}
> >=20
> > Note irq_radix_revmap_init() loops over all irq_hosts ...
>=20
> Yep, but there's only one host (xics)
>=20
> >=20
> > > diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/plat=
forms/pseries/smp.c
> > > index 9d8f8c8..b143fe7 100644
> > > --- a/arch/powerpc/platforms/pseries/smp.c
> > > +++ b/arch/powerpc/platforms/pseries/smp.c
> > > @@ -130,6 +130,7 @@ static void smp_xics_message_pass(int target, int=
msg)
> > > =20
> > > static int __init smp_xics_probe(void)
> > > {
> > > + irq_radix_revmap_init();
> > > xics_request_IPIs();
> >=20
> > But now it's only called from the xics setup code.
> >=20
> > Which seems a bit ugly. In practice it doesn't matter because at the
> > moment xics is the only user of the radix revmap. But if we're going to
> > switch to this sort of initialisation I think xics should only be
> > init'ing the revmap for itself.
>=20
> You're right, that's what I intended to do from the beginning but
> stumbled upon ... hmm, can't remember what, that made me change
> my mind.
Ah yes, I wanted to do it from xics_init_host() but backed off
because at that point the mm is not up. But it does not make a difference
as the first request_irq() happens after the mm is up. A bit shaky I
concede.
> But I agree, I'm not particularly proud of that. Will look
> again into that.
>=20
> >=20
> >=20
> > This boot ordering stuff is pretty hairy, so I might have missed
> > something, but this is how the code is ordered AFAICT:
> > =EF=BB=BF
> > start_kernel()
> > init_IRQ()
> > ...
> > local_irq_enable()
> > ...
> > rest_init()
> > kernel_thread()
> > kernel_init()
> > smp_prepare_cpus()
> > smp_xics_probe() (via smp_ops->probe())
> >=20
> >=20
> > What's stopping us from taking an irq between local_irq_enable() and
> > smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
>=20
> It's hairy, I agree, but as you've mentioned no one has done a request_=
irq()
> at that point. The first one to do it is smp_xics_probe() for the IPI.
>=20
> Thanks for your comments.
>=20
> Sebastien.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Sebastien Dugue @ 2008-07-31 12:00 UTC (permalink / raw)
To: michael
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <1217504456.9817.22.camel@localhost>
Hi Michael,
On Thu, 31 Jul 2008 21:40:56 +1000 Michael Ellerman <michael@ellerman.id.au=
> wrote:
> On Thu, 2008-07-31 at 11:40 +0200, Sebastien Dugue wrote:
> > The radix tree used for fast irq reverse mapping by the XICS is initial=
ized
> > late in the boot process, after the first interrupt (IPI) gets register=
ed
> > and after the first IPI is received.
> >=20
> > This patch moves the initialization of the XICS radix tree earlier in=
to
> > the boot process in smp_xics_probe() (the mm is already up but no inter=
rupts
> > have been registered at that point) to avoid having to insert a mapping=
into
> > the tree in interrupt context. This will help in simplifying the locking
> > constraints and move to a lockless radix tree in subsequent patches.
> >=20
> > As a nice side effect, there is no need any longer to check for
> > (host->revmap_data.tree.gfp_mask !=3D 0) to know if the tree have been
> > initialized.
>=20
> Hi Sebastien,
>=20
> This is a nice cleanup, I think :)
Thanks.
>=20
> > diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> > index 6ac8612..0a1445c 100644
> > --- a/arch/powerpc/kernel/irq.c
> > +++ b/arch/powerpc/kernel/irq.c
> > @@ -893,28 +890,28 @@ unsigned int irq_find_mapping(struct irq_host *ho=
st,
> > }
> > EXPORT_SYMBOL_GPL(irq_find_mapping);
> > =20
> > +void __init irq_radix_revmap_init(void)
> > +{
> > + struct irq_host *h;
> > +
> > + list_for_each_entry(h, &irq_hosts, link) {
> > + if (h->revmap_type =3D=3D IRQ_HOST_MAP_TREE)
> > + INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
> > + }
> > +}
>=20
> Note irq_radix_revmap_init() loops over all irq_hosts ...
Yep, but there's only one host (xics)
>=20
> > diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platfo=
rms/pseries/smp.c
> > index 9d8f8c8..b143fe7 100644
> > --- a/arch/powerpc/platforms/pseries/smp.c
> > +++ b/arch/powerpc/platforms/pseries/smp.c
> > @@ -130,6 +130,7 @@ static void smp_xics_message_pass(int target, int m=
sg)
> > =20
> > static int __init smp_xics_probe(void)
> > {
> > + irq_radix_revmap_init();
> > xics_request_IPIs();
>=20
> But now it's only called from the xics setup code.
>=20
> Which seems a bit ugly. In practice it doesn't matter because at the
> moment xics is the only user of the radix revmap. But if we're going to
> switch to this sort of initialisation I think xics should only be
> init'ing the revmap for itself.
You're right, that's what I intended to do from the beginning but
stumbled upon ... hmm, can't remember what, that made me change
my mind. But I agree, I'm not particularly proud of that. Will look
again into that.
>=20
>=20
> This boot ordering stuff is pretty hairy, so I might have missed
> something, but this is how the code is ordered AFAICT:
> =EF=BB=BF
> start_kernel()
> init_IRQ()
> ...
> local_irq_enable()
> ...
> rest_init()
> kernel_thread()
> kernel_init()
> smp_prepare_cpus()
> smp_xics_probe() (via smp_ops->probe())
>=20
>=20
> What's stopping us from taking an irq between local_irq_enable() and
> smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
It's hairy, I agree, but as you've mentioned no one has done a request_ir=
q()
at that point. The first one to do it is smp_xics_probe() for the IPI.
Thanks for your comments.
Sebastien.
^ permalink raw reply
* Re: [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks
From: Nick Piggin @ 2008-07-31 11:51 UTC (permalink / raw)
To: Mel Gorman
Cc: linux-mm, libhugetlbfs-devel, linux-kernel, linuxppc-dev,
Eric Munson, Andrew Morton
In-Reply-To: <20080731112734.GE1704@csn.ul.ie>
On Thursday 31 July 2008 21:27, Mel Gorman wrote:
> On (31/07/08 16:26), Nick Piggin didst pronounce:
> > I imagine it should be, unless you're using a CPU with seperate TLBs for
> > small and huge pages, and your large data set is mapped with huge pages,
> > in which case you might now introduce *new* TLB contention between the
> > stack and the dataset :)
>
> Yes, this can happen particularly on older CPUs. For example, on my
> crash-test laptop the Pentium III there reports
>
> TLB and cache info:
> 01: Instruction TLB: 4KB pages, 4-way set assoc, 32 entries
> 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries
Oh? Newer CPUs tend to have unified TLBs?
> > Also, interestingly I have actually seen some CPUs whos memory operations
> > get significantly slower when operating on large pages than small (in the
> > case when there is full TLB coverage for both sizes). This would make
> > sense if the CPU only implements a fast L1 TLB for small pages.
>
> It's also possible there is a micro-TLB involved that only support small
> pages.
That is the case on a couple of contemporary CPUs I've tested with
(although granted they are engineering samples, but I don't expect
that to be the cause)
> > So for the vast majority of workloads, where stacks are relatively small
> > (or slowly changing), and relatively hot, I suspect this could easily
> > have no benefit at best and slowdowns at worst.
>
> I wouldn't expect an application with small stacks to request its stack
> to be backed by hugepages either. Ideally, it would be enabled because a
> large enough number of DTLB misses were found to be in the stack
> although catching this sort of data is tricky.
Sure, as I said, I have nothing against this functionality just because
it has the possibility to cause a regression. I was just pointing out
there are a few possibilities there, so it will take a particular type
of app to take advantage of it. Ie. it is not something you would ever
just enable "just in case the stack starts thrashing the TLB".
> > But I'm not saying that as a reason not to merge it -- this is no
> > different from any other hugepage allocations and as usual they have to
> > be used selectively where they help.... I just wonder exactly where huge
> > stacks will help.
>
> Benchmark wise, SPECcpu and SPEComp have stack-dependent benchmarks.
> Computations that partition problems with recursion I would expect to
> benefit as well as some JVMs that heavily use the stack (see how many docs
> suggest setting ulimit -s unlimited). Bit out there, but stack-based
> languages would stand to gain by this. The potential gap is for threaded
> apps as there will be stacks that are not the "main" stack. Backing those
> with hugepages depends on how they are allocated (malloc, it's easy,
> MAP_ANONYMOUS not so much).
Oh good, then there should be lots of possibilities to demonstrate it.
Thanks,
Nick
^ permalink raw reply
* Re: [PATCH] powerpc: i2c-mpc: make speed registers configurable via FDT
From: Wolfgang Grandegger @ 2008-07-31 11:51 UTC (permalink / raw)
To: Grant Likely; +Cc: Scott Wood, Linuxppc-dev, Timur Tabi
In-Reply-To: <20080727012722.GH12191@secretlab.ca>
Grant Likely wrote:
> On Fri, Jul 25, 2008 at 11:19:41AM -0500, Timur Tabi wrote:
>> Wolfgang Grandegger wrote:
>>
>>> I know but we still need an algorithm for MPC52xx and MPC82xx as well.
>> That's true, but I still think hard-coding values of DFSR and FDR in the device
>> tree is not a good way to do this.
>
> I agree, it should encode real frequencies, not raw register values.
Digging deeper I'm frightened by plenty of platform specific code. We
would need:
- one table of divider,fdr,dfsr values for the MPC82/3/5/6xx processors
(already available from Timur's U-Boot implementation)
- one table of divider,fdr values for the MPC5200 rev A.
- one table of divider,fdr values for the MPC5200 rev B.
(the Rev. B has two more pre-scaler bits).
- furthermore, there are various mpc-specific I2C clock sources:
MPC82xx : fsl_get_sys_freq()
MPC5200 : IPB
MPC83xx : fsl_get_sys_freq()
MPC8540/41/60/55,MPC8610 : fsl_get_sys_freq()
MPC8543/45/47/48/68, MPC8641: fsl_get_sys_freq()/2
MPC8544 : fsl_get_sys_freq()/2 or /3
It would make sense to hand-over the I2C frequency from U-Boot to
Linux.
Wolfgang.
^ permalink raw reply
* Re: [PATCH] powerpc - Initialize the irq radix tree earlier
From: Michael Ellerman @ 2008-07-31 11:40 UTC (permalink / raw)
To: Sebastien Dugue
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
linuxppc-dev, paulus, gilles.carry, tglx
In-Reply-To: <1217497241-10685-2-git-send-email-sebastien.dugue@bull.net>
[-- Attachment #1: Type: text/plain, Size: 2903 bytes --]
On Thu, 2008-07-31 at 11:40 +0200, Sebastien Dugue wrote:
> The radix tree used for fast irq reverse mapping by the XICS is initialized
> late in the boot process, after the first interrupt (IPI) gets registered
> and after the first IPI is received.
>
> This patch moves the initialization of the XICS radix tree earlier into
> the boot process in smp_xics_probe() (the mm is already up but no interrupts
> have been registered at that point) to avoid having to insert a mapping into
> the tree in interrupt context. This will help in simplifying the locking
> constraints and move to a lockless radix tree in subsequent patches.
>
> As a nice side effect, there is no need any longer to check for
> (host->revmap_data.tree.gfp_mask != 0) to know if the tree have been
> initialized.
Hi Sebastien,
This is a nice cleanup, I think :)
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index 6ac8612..0a1445c 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -893,28 +890,28 @@ unsigned int irq_find_mapping(struct irq_host *host,
> }
> EXPORT_SYMBOL_GPL(irq_find_mapping);
>
> +void __init irq_radix_revmap_init(void)
> +{
> + struct irq_host *h;
> +
> + list_for_each_entry(h, &irq_hosts, link) {
> + if (h->revmap_type == IRQ_HOST_MAP_TREE)
> + INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
> + }
> +}
Note irq_radix_revmap_init() loops over all irq_hosts ...
> diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
> index 9d8f8c8..b143fe7 100644
> --- a/arch/powerpc/platforms/pseries/smp.c
> +++ b/arch/powerpc/platforms/pseries/smp.c
> @@ -130,6 +130,7 @@ static void smp_xics_message_pass(int target, int msg)
>
> static int __init smp_xics_probe(void)
> {
> + irq_radix_revmap_init();
> xics_request_IPIs();
But now it's only called from the xics setup code.
Which seems a bit ugly. In practice it doesn't matter because at the
moment xics is the only user of the radix revmap. But if we're going to
switch to this sort of initialisation I think xics should only be
init'ing the revmap for itself.
This boot ordering stuff is pretty hairy, so I might have missed
something, but this is how the code is ordered AFAICT:
start_kernel()
init_IRQ()
...
local_irq_enable()
...
rest_init()
kernel_thread()
kernel_init()
smp_prepare_cpus()
smp_xics_probe() (via smp_ops->probe())
What's stopping us from taking an irq between local_irq_enable() and
smp_xics_probe() ? Is it just that no one's request_irq()'ed them yet?
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks
From: Mel Gorman @ 2008-07-31 11:27 UTC (permalink / raw)
To: Nick Piggin
Cc: linux-mm, libhugetlbfs-devel, linux-kernel, linuxppc-dev,
Eric Munson, Andrew Morton
In-Reply-To: <200807311626.15709.nickpiggin@yahoo.com.au>
On (31/07/08 16:26), Nick Piggin didst pronounce:
> On Thursday 31 July 2008 16:14, Andrew Morton wrote:
> > On Thu, 31 Jul 2008 16:04:14 +1000 Nick Piggin <nickpiggin@yahoo.com.au>
> wrote:
> > > > Do we expect that this change will be replicated in other
> > > > memory-intensive apps? (I do).
> > >
> > > Such as what? It would be nice to see some numbers with some HPC or java
> > > or DBMS workload using this. Not that I dispute it will help some cases,
> > > but 10% (or 20% for ppc) I guess is getting toward the best case, short
> > > of a specifically written TLB thrasher.
> >
> > I didn't realise the STREAM is using vast amounts of automatic memory.
> > I'd assumed that it was using sane amounts of stack, but the stack TLB
> > slots were getting zapped by all the heap-memory activity. Oh well.
>
> An easy mistake to make because that's probabably how STREAM would normally
> work. I think what Mel had done is to modify the stream kernel so as to
> have it operate on arrays of stack memory.
>
Yes, I mentioned in the mail that STREAM was patched to use stack for
its data. It was as much to show the patches were working as advertised
even though it is an extreme case obviously.
I had seen stack-hugepage-backing as something that would improve performance
in addition to something else as opposed to having to stand entirely on its
own. For example, I would expect many memory-intensive applications to gain
by just having malloc and stack backed more than backing either in isolation.
> > I guess that effect is still there, but smaller.
>
> I imagine it should be, unless you're using a CPU with seperate TLBs for
> small and huge pages, and your large data set is mapped with huge pages,
> in which case you might now introduce *new* TLB contention between the
> stack and the dataset :)
Yes, this can happen particularly on older CPUs. For example, on my
crash-test laptop the Pentium III there reports
TLB and cache info:
01: Instruction TLB: 4KB pages, 4-way set assoc, 32 entries
02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries
so a workload that sparsely addressed memory (i.e. >= 4MB strides on each
reference) might suffer more TLB misses with large pages than with small.
It's hardly new that there are is uncertainity around when and if hugepages
are of benefit and where.
> Also, interestingly I have actually seen some CPUs whos memory operations
> get significantly slower when operating on large pages than small (in the
> case when there is full TLB coverage for both sizes). This would make
> sense if the CPU only implements a fast L1 TLB for small pages.
>
It's also possible there is a micro-TLB involved that only support small
pages. It's been the case for a while that what wins on one machine type
may lose on another.
> So for the vast majority of workloads, where stacks are relatively small
> (or slowly changing), and relatively hot, I suspect this could easily have
> no benefit at best and slowdowns at worst.
>
I wouldn't expect an application with small stacks to request its stack
to be backed by hugepages either. Ideally, it would be enabled because a
large enough number of DTLB misses were found to be in the stack
although catching this sort of data is tricky.
> But I'm not saying that as a reason not to merge it -- this is no
> different from any other hugepage allocations and as usual they have to be
> used selectively where they help.... I just wonder exactly where huge
> stacks will help.
>
Benchmark wise, SPECcpu and SPEComp have stack-dependent benchmarks.
Computations that partition problems with recursion I would expect to benefit
as well as some JVMs that heavily use the stack (see how many docs suggest
setting ulimit -s unlimited). Bit out there, but stack-based languages would
stand to gain by this. The potential gap is for threaded apps as there will
be stacks that are not the "main" stack. Backing those with hugepages depends
on how they are allocated (malloc, it's easy, MAP_ANONYMOUS not so much).
> > I agree that few real-world apps are likely to see gains of this
> > order. More benchmarks, please :)
>
> Would be nice, if just out of morbid curiosity :)
>
Benchmarks will happen, they just take time, you know the way. The STREAM one
in the meantime is a "this works" and has an effect. I'm hoping Andrew Hastings
will have figures at hand and I cc'd him elsewhere in the thread for comment.
Thanks
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* Re: ide pmac breakage
From: Bartlomiej Zolnierkiewicz @ 2008-07-31 10:51 UTC (permalink / raw)
To: benh; +Cc: FUJITA Tomonori, linux-ide, petkovbb, linuxppc-dev
In-Reply-To: <1217478322.11188.410.camel@pasglop>
On Thursday 31 July 2008, Benjamin Herrenschmidt wrote:
>=20
> > Is it actually caused by additional reference counting on drive->gendev?
> > IOW if you reverse the patch below instead of applying the previous fix
> > do things work OK again?
> >=20
> > > Note that there shouldn't be anything fundamentally different from
> > > ide-pmac here vs. something like pcmcia IDE cards... do you have one =
of
> > > these to test with ?
> >=20
> > Nope and I really don't intend to have one. I count on other people
> > to take some care of support for host drivers that they maintain/use. ;)
>=20
> Reverting the patch below does the job. Thanks.
Thanks, this narrows down the problem pretty nicely.
[ Unfortunately we cannot revert the whole patch as it would break
unloading of IDE host drivers modules so I still need you help on
fixing this one. ]
Lets get back to the oops:
Vector: 300 (Data Access) at [c59dfdc0]
=C2=A0 =C2=A0 pc: c0211f78: ide_device_put+0x18/0x58
=C2=A0 =C2=A0 lr: c0223c34: ide_cd_put+0x40/0x5c
=C2=A0 =C2=A0 sp: c59dfe70
=C2=A0 =C2=A0msr: 9032
=C2=A0 =C2=A0dar: 10
=C2=A0dsisr: 40000000
=C2=A0 current =3D 0xc58a9880
=C2=A0 =C2=A0 pid =C2=A0 =3D 843, comm =3D media-bay
enter ? for help
[c59dfe80] c0223c34 ide_cd_put+0x40/0x5c
[c59dfea0] c02114d4 generic_ide_remove+0x28/0x3c
[c59dfeb0] c01ea108 __device_release_driver+0x78/0xb4
[c59dfec0] c01ea218 device_release_driver+0x28/0x44
[c59dfee0] c01e9350 bus_remove_device+0xac/0xd8
[c59dff00] c01e77f8 device_del+0x104/0x198
[c59dff20] c01e78a4 device_unregister+0x18/0x30
[c59dff40] c0212598 __ide_port_unregister_devices+0x6c/0x88
[c59dff60] c021276c ide_port_unregister_devices+0x38/0x80
[c59dff80] c0209078 media_bay_step+0x1cc/0x5c0
[c59dffb0] c02094f8 media_bay_task+0x8c/0xcc
[c59dffd0] c0048640 kthread+0x48/0x84
[c59dfff0] c0011b38 kernel_thread+0x44/0x60
On a fresh look at ide_device_put(), ide_host_alloc() and pmac.c
it may be that the above oops is actually media-bay specific.
ide_device_put():
=2E..
struct device *host_dev =3D drive->hwif->host->dev[0];
struct module *module =3D host_dev ? host_dev->driver->owner : NULL;
=2E..
ide_host_alloc():
=2E..
if (hws[0])
host->dev[0] =3D hws[0]->dev;
=2E..
pmac.c:
=2E..
pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *ma=
tch)
=2E..
dev_set_drvdata(&mdev->ofdev.dev, pmif);
memset(&hw, 0, sizeof(hw));
pmac_ide_init_ports(&hw, pmif->regbase);
hw.irq =3D irq;
hw.dev =3D &mdev->bus->pdev->dev;
hw.parent =3D &mdev->ofdev.dev;
=2E..
pmac macio is unique in using different devices for hwif->dev / host->dev
(hw.dev) and hwif->gendev.parent / dev_set_drvdata() (hw.parent)
[ I has been actually wondering why is it so for some time...? ]
Thus we may be hitting oops in ide_device_put() on host_dev->driver
because hw.dev is used as host->dev for pmac macio in ide_device_put()
while we really want to use hw.parent.
=46ix should be as simple as:
=2D host->dev[0] =3D hws[0]->dev;
+ host->dev[0] =3D hws[0]->parent ? hws[0]->parent : hws[0]-=
>dev;
Could you please try it together with my previous patch for
ide_device_{get,put}()?
Bart
^ permalink raw reply
* Re: [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks
From: Mel Gorman @ 2008-07-31 10:31 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-mm, libhugetlbfs-devel, linux-kernel, linuxppc-dev, abh,
ebmunson
In-Reply-To: <20080730130709.eb541475.akpm@linux-foundation.org>
On (30/07/08 13:07), Andrew Morton didst pronounce:
> On Wed, 30 Jul 2008 20:30:10 +0100
> Mel Gorman <mel@csn.ul.ie> wrote:
>
> > With Erics patch and libhugetlbfs, we can automatically back text/data[1],
> > malloc[2] and stacks without source modification. Fairly soon, libhugetlbfs
> > will also be able to override shmget() to add SHM_HUGETLB. That should cover
> > a lot of the memory-intensive apps without source modification.
>
> The weak link in all of this still might be the need to reserve
> hugepages and the unreliability of dynamically allocating them.
>
> The dynamic allocation should be better nowadays, but I've lost track
> of how reliable it really is. What's our status there?
>
We are a lot more reliable than we were although exact quantification is
difficult because it's workload dependent. For a long time, I've been able
to test bits and pieces with hugepages by allocating the pool at the time
I needed it even after days of uptime. Previously this required a reboot.
I've also been able to use the dynamic hugepage pool resizing effectively
and we track how much it is succeeding and failing in /proc/vmstat (see the
htlb fields) to watch for problems. Between that and /proc/pagetypeinfo, I am
expecting to be able to identify availablilty problems. As an administrator
can now set a minimum pool size and the maximum size of the pool (nr_hugepages
and nr_overcommit_hugepages), the configuration difficulties should be relaxed.
If it is found that anti-fragmentation can be broken down and pool
resizing starts failing after X amount of time on Y workloads, there is
still the option of using movablecore=BiggestPoolSizeIWillEverNeed
and writing 1 to /proc/sys/vm/hugepages_treat_as_movable so the hugepage
pool can grow/shrink reliably there.
Overall, it's in pretty good shape.
To be fair, one snag is that that swap is almost required for pool
resizing to work as I never pushed to complete memory compaction
(http://lwn.net/Articles/238837/). Hence, we depend on the workload to
have lots of filesystem-backed data for lumpy-reclaim to do its job, for
pool resizing to take place between batch jobs or for swap to be configured
even if it's just for the duration of a pool resize.
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* Re: [PATCH 0/3] powerpc - Make the irq reverse mapping tree lockless
From: Sebastien Dugue @ 2008-07-31 10:12 UTC (permalink / raw)
To: linuxppc-dev
Cc: tinytim, linux-rt-users, jean-pierre.dion, rostedt, linux-kernel,
paulus, gilles.carry, tglx
In-Reply-To: <1217497241-10685-1-git-send-email-sebastien.dugue@bull.net>
OK, I goofed up with git-format-patch, forgot the --numbered option.
The patches subjects should read:
[PATCH 1/3] powerpc - Initialize the irq radix tree earlier
[PATCH 2/3] powerpc - Separate the irq radix tree insertion and lookup
[PATCH 3/3] powerpc - Make the irq reverse mapping radix tree lockless
Sorry for that.
Sebastien.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox