* Re: [MPC7448] machdep_calls
From: Sébastien Chrétien @ 2008-08-19 9:23 UTC (permalink / raw)
To: benh; +Cc: Linuxppc-dev
In-Reply-To: <1219130863.8062.39.camel@pasglop>
[-- Attachment #1: Type: text/plain, Size: 3243 bytes --]
So I will write .setup_arch of machine_call structure.
When is ppc_md.setup_arch() called ?
2008/8/19, Benjamin Herrenschmidt <benh@kernel.crashing.org>:
>
> On Tue, 2008-08-19 at 09:00 +0200, Sébastien Chrétien wrote:
> > I have no screen that's why I have to use UART. I followed the CPM
> > model in head_32.S :
> > #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> > setup_cpm_bat:
> > lis r8, 0xf000
> > ori r8, r8, 0x002a
> > mtspr SPRN_DBAT1L, r8
> >
> > lis r11, 0xf000
> > ori r11, r11, (BL_1M << 2) | 2
> > mtspr SPRN_DBAT1U, r11
> >
> > blr
> > #endif
>
>
> The "EARLY DEBUG" stuff is a pile of hacks to help with bringup,
> it's definitely not a long term solution to your problems.
>
> You may also want to look at Grant Likely's work on doing proper
> early ioremap using BATs.
>
>
> > With this code I can use udbg.
> >
> > According to you, what is the best way ?
>
>
> The above is fine for early debug console. But that's definitely
> not the only kind of thing you may want to put in your setup_arch()...
> Look at what others do.
>
> Ben.
>
>
> > 2008/8/18, Benjamin Herrenschmidt <benh@kernel.crashing.org>:
> > On Mon, 2008-08-18 at 16:17 +0200, Sébastien Chrétien wrote:
> > > The mpc7448hpc2 uses a tsi108-bridge. My board uses an IP on
> > a FPGA..
> > > I read the code of mpc7448_hpc2.c.
> > > It uses a ioremap in order to iniatilize the tsi108
> > registers. But I
> > > have already initialized MMU with my registers in HEAD_32.S.
> > Do I need
> > > to use ioremap in setup_arch() ?
> >
> >
> > Why did you hack head_32.S ? You shouldn't do that... This is
> > common
> > code, not platform code.
> >
> > Ben.
> >
> > >
> > >
> > >
> > > 2008/8/18, Michael Ellerman <michael@ellerman.id.au>:
> > > On Mon, 2008-08-18 at 13:35 +0200, Sébastien
> > Chrétien wrote:
> > > > Can somebody explain me the aim of the
> > > function "setup_arch" in the
> > > > machine_call structure ?
> > >
> > >
> > > Is this MPC7448 anything like an mpc7448hpc2 ?
> > >
> > > If so maybe you should start by looking at the code
> > for it in:
> > >
> > > arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
> > >
> > > Even if it's not related, that will give you some
> > idea of what
> > > the
> > > callbacks are for.
> > >
> > > cheers
> > >
> > > --
> > > Michael Ellerman
> > > OzLabs, IBM Australia Development Lab
> > >
> > > wwweb: http://michael.ellerman.id.au
> > > phone: +61 2 6212 1183 (tie line 70 21183)
> > >
> > > We do not inherit the earth from our ancestors,
> > > we borrow it from our children. - S.M.A.R.T Person
> > >
> > >
> >
> >
>
>
[-- Attachment #2: Type: text/html, Size: 7166 bytes --]
^ permalink raw reply
* Re: Corrections please ...
From: Arnd Bergmann @ 2008-08-19 9:02 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Kevin Diggs
In-Reply-To: <48A9E2C6.1030205@hypersurf.com>
On Monday 18 August 2008, Kevin Diggs wrote:
> Subject: Corrections please ...
The subject should be the one line change log, e.g.
[PATCH] add kerneldoc comments for completion.h
Also, cc the maintainer of the code. If you can't tell
from the MAINTAINERS file, look for the most common
name when doing 'git log path/to/file.c'. In this case,
there does not seem to be an actual maintainer, but I
would expect Willy and Ingo to be interested in the code.
Read Documentation/SubmittingPatches.
> Could I get any needed corrections on this. Especially on the "???"
>
The introductory text should explain why the patch is needed.
If you have more comments, put them behind the changelog text,
under a '---' line.
> [kevdig@PowerMac8600B linux-2.6.26]$ diff -U3
> include/linux/completion.{h.orig,h}|more
> --- include/linux/completion.h.orig 2008-08-13 00:56:52.000000000 -0700
> +++ include/linux/completion.h 2008-08-18 13:00:23.000000000 -0700
Patches should be in -p1 format. Best use a tool like quilt, git or
mercurial to generate the patch instead of doing it by hand.
> @@ -10,6 +10,16 @@
>
> #include <linux/wait.h>
>
> +/**
> + * struct completion - structure used to maintain state for a "completion"
> + * @done: counting variable used to signal completion
> + * @wait: internal wait queue head; used for locking and synchronization
> + *
> + * This is the structure used to maintain the state for a "completion". See
> + * also: complete(), wait_for_completion() (and friends _timeout,
> + * _interruptible, _interruptible_timeout, and _killable),
> init_completion(),
> + * and macros DECLARE_COMPLETION() and INIT_COMPLETION().
> + */
Line wrapping is broken, you need the right settings for sending unmodified
emails from your mail client.
Arnd <><
^ permalink raw reply
* [PATCH] powerpc: remove include of linux/of_device.h from asm/of_device.h
From: Stephen Rothwell @ 2008-08-19 8:19 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Now that we have removed all inclusions of asm/of_device.h, this
compatability include can be removed.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/include/asm/of_device.h | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
This depends on my previous patch "powerpc/drivers: use linux/of_device.h
instead of asm/of_device.h".
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
index 3c12399..a64debf 100644
--- a/arch/powerpc/include/asm/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
@@ -24,8 +24,5 @@ extern struct of_device *of_device_alloc(struct device_node *np,
extern int of_device_uevent(struct device *dev,
struct kobj_uevent_env *env);
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_OF_DEVICE_H */
--
1.5.6.3
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* Re: [PATCH 0/5] Relocatable 64-bit kernel using linker PIE support
From: Mohan Kumar M @ 2008-08-19 8:11 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <18602.27761.214066.779209@cargo.ozlabs.ibm.com>
Paul Mackerras wrote:
> Mohan Kumar M writes:
>
>> Attaching the .config
>
> Hmmm, your config works for me on a POWER6 partition here, whether I
> netboot the zImage.pseries or boot it with yaboot. I wonder if your
> toolchain is an older version. What is the output from ld --version
> and gcc --version?
# ld --version
GNU ld version 2.16.91.0.5 20051219 (SUSE Linux)
# gcc --version
gcc (GCC) 4.1.2 20070115 (prerelease) (SUSE Linux)
If the problem is related to toolchain version, which one you recommend
to test?
>
> Also, could you send me off-list your compiled vmlinux?
You can download the zipped vmlinux at
http://mohankumar.m.googlepages.com/vmlinux.gz
Regards,
Mohan.
^ permalink raw reply
* Re: [MPC7448] machdep_calls
From: Benjamin Herrenschmidt @ 2008-08-19 7:27 UTC (permalink / raw)
To: Sébastien Chrétien; +Cc: Linuxppc-dev
In-Reply-To: <319b0ac50808190000m211ff885ucbf05a85b43f5c14@mail.gmail.com>
On Tue, 2008-08-19 at 09:00 +0200, Sébastien Chrétien wrote:
> I have no screen that's why I have to use UART. I followed the CPM
> model in head_32.S :
> #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> setup_cpm_bat:
> lis r8, 0xf000
> ori r8, r8, 0x002a
> mtspr SPRN_DBAT1L, r8
>
> lis r11, 0xf000
> ori r11, r11, (BL_1M << 2) | 2
> mtspr SPRN_DBAT1U, r11
>
> blr
> #endif
The "EARLY DEBUG" stuff is a pile of hacks to help with bringup,
it's definitely not a long term solution to your problems.
You may also want to look at Grant Likely's work on doing proper
early ioremap using BATs.
> With this code I can use udbg.
>
> According to you, what is the best way ?
The above is fine for early debug console. But that's definitely
not the only kind of thing you may want to put in your setup_arch()...
Look at what others do.
Ben.
> 2008/8/18, Benjamin Herrenschmidt <benh@kernel.crashing.org>:
> On Mon, 2008-08-18 at 16:17 +0200, Sébastien Chrétien wrote:
> > The mpc7448hpc2 uses a tsi108-bridge. My board uses an IP on
> a FPGA..
> > I read the code of mpc7448_hpc2.c.
> > It uses a ioremap in order to iniatilize the tsi108
> registers. But I
> > have already initialized MMU with my registers in HEAD_32.S.
> Do I need
> > to use ioremap in setup_arch() ?
>
>
> Why did you hack head_32.S ? You shouldn't do that... This is
> common
> code, not platform code.
>
> Ben.
>
> >
> >
> >
> > 2008/8/18, Michael Ellerman <michael@ellerman.id.au>:
> > On Mon, 2008-08-18 at 13:35 +0200, Sébastien
> Chrétien wrote:
> > > Can somebody explain me the aim of the
> > function "setup_arch" in the
> > > machine_call structure ?
> >
> >
> > Is this MPC7448 anything like an mpc7448hpc2 ?
> >
> > If so maybe you should start by looking at the code
> for it in:
> >
> > arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
> >
> > Even if it's not related, that will give you some
> idea of what
> > the
> > callbacks are for.
> >
> > cheers
> >
> > --
> > Michael Ellerman
> > OzLabs, IBM Australia Development Lab
> >
> > wwweb: http://michael.ellerman.id.au
> > phone: +61 2 6212 1183 (tie line 70 21183)
> >
> > We do not inherit the earth from our ancestors,
> > we borrow it from our children. - S.M.A.R.T Person
> >
> >
>
>
^ permalink raw reply
* Re: [MPC7448] machdep_calls
From: Sébastien Chrétien @ 2008-08-19 7:00 UTC (permalink / raw)
To: benh; +Cc: Linuxppc-dev
In-Reply-To: <1219095576.28339.74.camel@pasglop>
[-- Attachment #1: Type: text/plain, Size: 1991 bytes --]
I have no screen that's why I have to use UART. I followed the CPM model in
head_32.S :
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
setup_cpm_bat:
lis r8, 0xf000
ori r8, r8, 0x002a
mtspr SPRN_DBAT1L, r8
lis r11, 0xf000
ori r11, r11, (BL_1M << 2) | 2
mtspr SPRN_DBAT1U, r11
blr
#endif
With this code I can use udbg.
According to you, what is the best way ?
2008/8/18, Benjamin Herrenschmidt <benh@kernel.crashing.org>:
>
> On Mon, 2008-08-18 at 16:17 +0200, Sébastien Chrétien wrote:
> > The mpc7448hpc2 uses a tsi108-bridge. My board uses an IP on a FPGA..
> > I read the code of mpc7448_hpc2.c.
> > It uses a ioremap in order to iniatilize the tsi108 registers. But I
> > have already initialized MMU with my registers in HEAD_32.S. Do I need
> > to use ioremap in setup_arch() ?
>
>
> Why did you hack head_32.S ? You shouldn't do that... This is common
> code, not platform code.
>
> Ben.
>
> >
> >
> >
> > 2008/8/18, Michael Ellerman <michael@ellerman.id.au>:
> > On Mon, 2008-08-18 at 13:35 +0200, Sébastien Chrétien wrote:
> > > Can somebody explain me the aim of the
> > function "setup_arch" in the
> > > machine_call structure ?
> >
> >
> > Is this MPC7448 anything like an mpc7448hpc2 ?
> >
> > If so maybe you should start by looking at the code for it in:
> >
> > arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
> >
> > Even if it's not related, that will give you some idea of what
> > the
> > callbacks are for.
> >
> > cheers
> >
> > --
> > Michael Ellerman
> > OzLabs, IBM Australia Development Lab
> >
> > wwweb: http://michael.ellerman.id.au
> > phone: +61 2 6212 1183 (tie line 70 21183)
> >
> > We do not inherit the earth from our ancestors,
> > we borrow it from our children. - S.M.A.R.T Person
> >
> >
>
>
[-- Attachment #2: Type: text/html, Size: 3548 bytes --]
^ permalink raw reply
* Re: [PATCH 0/5] Relocatable 64-bit kernel using linker PIE support
From: Paul Mackerras @ 2008-08-19 6:47 UTC (permalink / raw)
To: Mohan Kumar M; +Cc: linuxppc-dev
In-Reply-To: <48AA5B8E.2000801@in.ibm.com>
Mohan Kumar M writes:
> Attaching the .config
Hmmm, your config works for me on a POWER6 partition here, whether I
netboot the zImage.pseries or boot it with yaboot. I wonder if your
toolchain is an older version. What is the output from ld --version
and gcc --version?
Also, could you send me off-list your compiled vmlinux?
Paul.
^ permalink raw reply
* Re: [PATCH] duplicate SNDRV_PCM_FMTBIT_S{16,24}_BE
From: Johannes Berg @ 2008-08-19 6:15 UTC (permalink / raw)
To: roel kluin; +Cc: linuxppc-dev, alsa-devel, linux-kernel
In-Reply-To: <48AA407C.8090409@gmail.com>
roel kluin wrote:
> untested, is it correct?
not a clue, do you know how long ago that was? :)
does the driver check endianness anywhere?
> duplicate SNDRV_PCM_FMTBIT_S{16,24}_BE
>
> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
> ---
> diff --git a/sound/aoa/codecs/snd-aoa-codec-tas.c
> b/sound/aoa/codecs/snd-aoa-codec-tas.c
> index 7a16a33..c922505 100644
> --- a/sound/aoa/codecs/snd-aoa-codec-tas.c
> +++ b/sound/aoa/codecs/snd-aoa-codec-tas.c
> @@ -654,15 +654,15 @@ static struct snd_kcontrol_new bass_control = {
> static struct transfer_info tas_transfers[] = {
> {
> /* input */
> - .formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE |
> - SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE,
> .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
> SNDRV_PCM_RATE_48000,
> .transfer_in = 1,
> },
> {
> /* output */
> - .formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE |
> - SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE,
> .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
> SNDRV_PCM_RATE_48000,
> .transfer_in = 0,
> },
>
>
^ permalink raw reply
* [PATCH] powerpc/spufs: Remove invalid semicolon after if statement
From: Ilpo Järvinen @ 2008-08-19 5:48 UTC (permalink / raw)
To: paulus, benh, linuxppc-dev; +Cc: Christian Krafft, Jeremy Kerr
[-- Attachment #1: Type: TEXT/PLAIN, Size: 703 bytes --]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
---
arch/powerpc/platforms/cell/spufs/sched.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2deeeba..f7e5af8 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -1030,7 +1030,7 @@ void spuctx_switch_state(struct spu_context *ctx,
node = spu->node;
if (old_state == SPU_UTIL_USER)
atomic_dec(&cbe_spu_info[node].busy_spus);
- if (new_state == SPU_UTIL_USER);
+ if (new_state == SPU_UTIL_USER)
atomic_inc(&cbe_spu_info[node].busy_spus);
}
}
--
1.5.2.2
^ permalink raw reply related
* Re: [PATCH 0/5] Relocatable 64-bit kernel using linker PIE support
From: Mohan Kumar M @ 2008-08-19 5:35 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <18602.9527.358136.469335@cargo.ozlabs.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 160 bytes --]
Hi Paul,
Attaching the .config
Paul Mackerras wrote:
> Mohan Kumar M writes:
>
>> If you need, I can give the .config I use.
>
> Yes please, send it over.
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 41786 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc1
# Mon Aug 18 14:24:37 2008
#
CONFIG_PPC64=y
#
# Processor support
#
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_VSX is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_GET_USER_PAGES_FAST=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
CONFIG_PPC_PSERIES_DEBUG=y
# CONFIG_PPC_SMLPAR is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_IBMVFC is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBMVETH=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_EHEA is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
CONFIG_IBM_BSR=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=1024
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_IPATH is not set
CONFIG_INFINIBAND_EHCA=m
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HCALL_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Benjamin Herrenschmidt @ 2008-08-19 4:17 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <alpine.DEB.1.10.0808182304300.13401@gandalf.stny.rr.com>
On Mon, 2008-08-18 at 23:12 -0400, Steven Rostedt wrote:
> On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
>
> > Ok, so i did a patch, but it doesn't fix the problem. So
> > there's something else whacking on the stack frames.
>
> Is it 32 bit or 64? I've tested the 64 bit quite a bit, but not so much
> the 32 (my powerbook is not usually that stable).
32-bit. Reproduced on powerbook by a user, 440, 750, ...
> You might want to look at the entry.S mcount code too.
Yeah, I had a look, nothing obviously bad there, but I may just
have missed it :-)
Ben.
^ permalink raw reply
* Re: [PATCH] ibmebus/of_platform: Move "name" sysfs attribute into generic OF devices
From: Paul Mackerras @ 2008-08-19 4:14 UTC (permalink / raw)
To: Joachim Fenkes
Cc: Stephen Rothwell, Olaf Hering, Paul Mackerras, LKML, LinuxPPC-Dev,
Christoph Raisch, Alexander Schmidt, Stefan Roscher,
David S. Miller
In-Reply-To: <200808051630.19619.fenkes@de.ibm.com>
Joachim Fenkes writes:
> Recent of_platform changes made of_bus_type_init() overwrite the bus type's
> .dev_attrs list, so move ibmebus' "name" attribute (which is needed by eHCA
> userspace support) into generic OF device code. Tested on POWER.
Is this a bugfix that is needed for 2.6.27?
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Steven Rostedt @ 2008-08-19 4:00 UTC (permalink / raw)
To: Mathieu Desnoyers
Cc: Paul E. McKenney, linux-kernel, linuxppc-dev, Steven Rostedt,
Scott Wood, Eran Liberty
In-Reply-To: <20080819033618.GA24085@Krystal>
On Mon, 18 Aug 2008, Mathieu Desnoyers wrote:
> > > >
> > >
> > > Argh. See text_poke(). It's there exactly for this purpose on x86.
> >
> > Ouch, I just did. text_poke is quite heavy. It would be interesting to see
> > that performed on 20,000 locations at one time. I could play with it, but
> > I'm a bit nervous.
> >
>
> It's alread used to modify the LOCK prefixes in alternative.c and did
> not seem to be too slow for that.. it should therefore be ok.
There's a lot more functions than locks ;-)
Anyway, this is only needed after system boot up. But then we do it ever
time we start or stop tracing. I'll try it out and see if it is noticable.
-- Steve
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Mathieu Desnoyers @ 2008-08-19 3:36 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, linux-kernel, linuxppc-dev, Steven Rostedt,
Scott Wood, Eran Liberty
In-Reply-To: <alpine.DEB.1.10.0808182329220.13401@gandalf.stny.rr.com>
* Steven Rostedt (rostedt@goodmis.org) wrote:
>
> On Mon, 18 Aug 2008, Mathieu Desnoyers wrote:
>
> > * Steven Rostedt (rostedt@goodmis.org) wrote:
> > >
> > > On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
> > >
> > > >
> > > > > Hmm, this was originally copied from x86, where we did a cmpxchg, but that
> > > > > is probably not needed since all of this is done in kstop_machine. Also,
> > > > > only the "get" is needed. If we don't fault there, we wont fault on the
> > > > > put (unless we have permissions wrong, and that would be a bug).
> > > >
> > > > Would it ? How do we make sure the kernel text is mapped writeable ?
> > >
> > > We map it writeable if FTRACE is enabled.
> > >
> >
> > Argh. See text_poke(). It's there exactly for this purpose on x86.
>
> Ouch, I just did. text_poke is quite heavy. It would be interesting to see
> that performed on 20,000 locations at one time. I could play with it, but
> I'm a bit nervous.
>
It's alread used to modify the LOCK prefixes in alternative.c and did
not seem to be too slow for that.. it should therefore be ok.
Mathieu
> -- Steve
--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Steven Rostedt @ 2008-08-19 3:32 UTC (permalink / raw)
To: Mathieu Desnoyers
Cc: Paul E. McKenney, linux-kernel, linuxppc-dev, Steven Rostedt,
Scott Wood, Eran Liberty
In-Reply-To: <20080819024707.GA22659@Krystal>
On Mon, 18 Aug 2008, Mathieu Desnoyers wrote:
> * Steven Rostedt (rostedt@goodmis.org) wrote:
> >
> > On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
> >
> > >
> > > > Hmm, this was originally copied from x86, where we did a cmpxchg, but that
> > > > is probably not needed since all of this is done in kstop_machine. Also,
> > > > only the "get" is needed. If we don't fault there, we wont fault on the
> > > > put (unless we have permissions wrong, and that would be a bug).
> > >
> > > Would it ? How do we make sure the kernel text is mapped writeable ?
> >
> > We map it writeable if FTRACE is enabled.
> >
>
> Argh. See text_poke(). It's there exactly for this purpose on x86.
Ouch, I just did. text_poke is quite heavy. It would be interesting to see
that performed on 20,000 locations at one time. I could play with it, but
I'm a bit nervous.
-- Steve
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Steven Rostedt @ 2008-08-19 3:12 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <1219114600.8062.15.camel@pasglop>
On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
> Ok, so i did a patch, but it doesn't fix the problem. So
> there's something else whacking on the stack frames.
Is it 32 bit or 64? I've tested the 64 bit quite a bit, but not so much
the 32 (my powerbook is not usually that stable).
You might want to look at the entry.S mcount code too.
>
> Still, here it is:
Thanks,
>
> powerpc/ftrace: Fix broken assembly for code replacement
>
> Instead, uses __get_user() and __put_user().
>
Acked-by: Steven Rostedt <srostedt@redhat.com>
-- Steve
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Benjamin Herrenschmidt @ 2008-08-19 2:56 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <1219113549.8062.13.camel@pasglop>
Ok, so i did a patch, but it doesn't fix the problem. So
there's something else whacking on the stack frames.
Still, here it is:
powerpc/ftrace: Fix broken assembly for code replacement
Instead, uses __get_user() and __put_user().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
Index: linux-work/arch/powerpc/kernel/ftrace.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/ftrace.c 2008-08-19 12:45:49.000000000 +1000
+++ linux-work/arch/powerpc/kernel/ftrace.c 2008-08-19 12:52:51.000000000 +1000
@@ -16,7 +16,7 @@
#include <asm/cacheflush.h>
#include <asm/ftrace.h>
-
+#include <asm/uaccess.h>
static unsigned int ftrace_nop = 0x60000000;
@@ -72,10 +72,9 @@ notrace int
ftrace_modify_code(unsigned long ip, unsigned char *old_code,
unsigned char *new_code)
{
- unsigned replaced;
- unsigned old = *(unsigned *)old_code;
- unsigned new = *(unsigned *)new_code;
- int faulted = 0;
+ unsigned int old = *(unsigned int *)old_code;
+ unsigned int new = *(unsigned int *)new_code;
+ unsigned int instr;
/*
* Note: Due to modules and __init, code can
@@ -85,32 +84,13 @@ ftrace_modify_code(unsigned long ip, uns
* No real locking needed, this code is run through
* kstop_machine.
*/
- asm volatile (
- "1: lwz %1, 0(%2)\n"
- " cmpw %1, %5\n"
- " bne 2f\n"
- " stwu %3, 0(%2)\n"
- "2:\n"
- ".section .fixup, \"ax\"\n"
- "3: li %0, 1\n"
- " b 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- _ASM_ALIGN "\n"
- _ASM_PTR "1b, 3b\n"
- ".previous"
- : "=r"(faulted), "=r"(replaced)
- : "r"(ip), "r"(new),
- "0"(faulted), "r"(old)
- : "memory");
-
- if (replaced != old && replaced != new)
- faulted = 2;
-
- if (!faulted)
- flush_icache_range(ip, ip + 8);
-
- return faulted;
+ if (__get_user(instr, (unsigned int __user *)ip))
+ return 1;
+ if (instr != old && instr != new)
+ return 2;
+ WARN_ON_ONCE(__put_user(new, (unsigned int __user *)ip));
+ flush_icache_range(ip, ip + 8);
+ return 0;
}
notrace int ftrace_update_ftrace_func(ftrace_func_t func)
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Mathieu Desnoyers @ 2008-08-19 2:47 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, linux-kernel, linuxppc-dev, Steven Rostedt,
Scott Wood, Eran Liberty
In-Reply-To: <alpine.DEB.1.10.0808182240330.13401@gandalf.stny.rr.com>
* Steven Rostedt (rostedt@goodmis.org) wrote:
>
> On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
>
> >
> > > Hmm, this was originally copied from x86, where we did a cmpxchg, but that
> > > is probably not needed since all of this is done in kstop_machine. Also,
> > > only the "get" is needed. If we don't fault there, we wont fault on the
> > > put (unless we have permissions wrong, and that would be a bug).
> >
> > Would it ? How do we make sure the kernel text is mapped writeable ?
>
> We map it writeable if FTRACE is enabled.
>
Argh. See text_poke(). It's there exactly for this purpose on x86.
Mathieu
> >
> > > So are you recommending something like
> > >
> > > int cmd;
> > >
> > > if (__get_user(cmd, ip))
> > > goto fault;
> > >
> > > if (cmd != old)
> > > goto not_same;
> > >
> > > WARN_ON_ONCE(__put_user(cmd, ip));
> > >
> > > If we did this, we could probably put this into the generic code:
> >
> > That would work I suppose, I'll give it a try.
> >
> > > if (copy_from_user(cmd, ip, ARCH_CALL_SIZE))
> > > goto fault;
> > >
> > > if (memcmp(cmd, old, ARCH_CALL_SIZE) != 0)
> > > goto not_same;
> > >
> > > WARN_ON_ONCE(copy_to_user(cmd, ip, ARCH_CALL_SIZE));
> >
> > You need the __ variants or the access_ok() checks will bite
> > you bad.
>
> Ah, good point ;-)
>
> -- Steve
>
--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Steven Rostedt @ 2008-08-19 2:41 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <1219113549.8062.13.camel@pasglop>
On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
>
> > Hmm, this was originally copied from x86, where we did a cmpxchg, but that
> > is probably not needed since all of this is done in kstop_machine. Also,
> > only the "get" is needed. If we don't fault there, we wont fault on the
> > put (unless we have permissions wrong, and that would be a bug).
>
> Would it ? How do we make sure the kernel text is mapped writeable ?
We map it writeable if FTRACE is enabled.
>
> > So are you recommending something like
> >
> > int cmd;
> >
> > if (__get_user(cmd, ip))
> > goto fault;
> >
> > if (cmd != old)
> > goto not_same;
> >
> > WARN_ON_ONCE(__put_user(cmd, ip));
> >
> > If we did this, we could probably put this into the generic code:
>
> That would work I suppose, I'll give it a try.
>
> > if (copy_from_user(cmd, ip, ARCH_CALL_SIZE))
> > goto fault;
> >
> > if (memcmp(cmd, old, ARCH_CALL_SIZE) != 0)
> > goto not_same;
> >
> > WARN_ON_ONCE(copy_to_user(cmd, ip, ARCH_CALL_SIZE));
>
> You need the __ variants or the access_ok() checks will bite
> you bad.
Ah, good point ;-)
-- Steve
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Benjamin Herrenschmidt @ 2008-08-19 2:39 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <alpine.DEB.1.10.0808182208110.13401@gandalf.stny.rr.com>
> Hmm, this was originally copied from x86, where we did a cmpxchg, but that
> is probably not needed since all of this is done in kstop_machine. Also,
> only the "get" is needed. If we don't fault there, we wont fault on the
> put (unless we have permissions wrong, and that would be a bug).
Would it ? How do we make sure the kernel text is mapped writeable ?
> So are you recommending something like
>
> int cmd;
>
> if (__get_user(cmd, ip))
> goto fault;
>
> if (cmd != old)
> goto not_same;
>
> WARN_ON_ONCE(__put_user(cmd, ip));
>
> If we did this, we could probably put this into the generic code:
That would work I suppose, I'll give it a try.
> if (copy_from_user(cmd, ip, ARCH_CALL_SIZE))
> goto fault;
>
> if (memcmp(cmd, old, ARCH_CALL_SIZE) != 0)
> goto not_same;
>
> WARN_ON_ONCE(copy_to_user(cmd, ip, ARCH_CALL_SIZE));
You need the __ variants or the access_ok() checks will bite
you bad.
Ben.
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Steven Rostedt @ 2008-08-19 2:28 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <1219110814.8062.2.camel@pasglop>
On Tue, 19 Aug 2008, Benjamin Herrenschmidt wrote:
> On Mon, 2008-08-18 at 14:27 -0400, Steven Rostedt wrote:
> >
> > On Mon, 18 Aug 2008, Scott Wood wrote:
> >
> > > Mathieu Desnoyers wrote:
> > > > asm volatile (
> > > > "1: lwz %1, 0(%2)\n"
> > > > " cmpw %1, %5\n"
> > > > " bne 2f\n"
> > > > " stwu %3, 0(%2)\n"
> > > > "2:\n"
> > > > ".section .fixup, \"ax\"\n"
> > > > "3: li %0, 1\n"
> > > > " b 2b\n"
> > > > ".previous\n"
> > > > ".section __ex_table,\"a\"\n"
> > > > _ASM_ALIGN "\n"
> > > > _ASM_PTR "1b, 3b\n"
> > > > ".previous"
> > > > : "=r"(faulted), "=r"(replaced)
> > > > : "r"(ip), "r"(new),
> > > > "0"(faulted), "r"(old)
> > > > : "memory");
> > >
> > > Some (most likely unrelated) nits in the above inline asm:
>
>
> Why not use __get_user/__put_user ?
Hmm, this was originally copied from x86, where we did a cmpxchg, but that
is probably not needed since all of this is done in kstop_machine. Also,
only the "get" is needed. If we don't fault there, we wont fault on the
put (unless we have permissions wrong, and that would be a bug).
So are you recommending something like
int cmd;
if (__get_user(cmd, ip))
goto fault;
if (cmd != old)
goto not_same;
WARN_ON_ONCE(__put_user(cmd, ip));
If we did this, we could probably put this into the generic code:
if (copy_from_user(cmd, ip, ARCH_CALL_SIZE))
goto fault;
if (memcmp(cmd, old, ARCH_CALL_SIZE) != 0)
goto not_same;
WARN_ON_ONCE(copy_to_user(cmd, ip, ARCH_CALL_SIZE));
-- Steve
^ permalink raw reply
* Re: [RFC][USB] powerpc: Workaround for the PPC440EPX USBH_23 errrata
From: Benjamin Herrenschmidt @ 2008-08-19 2:03 UTC (permalink / raw)
To: Vitaly Bordug
Cc: linuxppc-dev@ozlabs.org, Stefan Roese,
linux-usb-devel@lists.sourceforge.net, Mark Miesfeld
In-Reply-To: <20080819021040.27ce7dbe@vitb-lp>
.../...
> There is a software workaround that uses a trick to detect if full-speed interface
> is enabled from the hi-speed driver(and vice versa), and use suspend control for ohci
> to enable/disable it appropriately.
>
> Initial version of the software workaround was posted to linux-usb-devel:
>
> http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html
>
> and later were made available from amcc.com:
> http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2
>
> The patch below is generally based on the latter, but reworked to
> powerpc/of_device USB drivers, and uses a few devicetree inquiries to get
> rid of (some) hardcoded defines.
Well, it seems to still call things based on #ifdef CONFIG_* instead
of testing for whatever "errata" bit or flag you can initialize.
A proper approach is to have the OF probe code detect via some
device-tree compatible testing or such, that it's indeed hitting the
broken chip, use that to set a quirk in the controller, and then
have the core ehci-hub.c code do whatever it has to do based on
the presence of that quirk.
Ben.
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Benjamin Herrenschmidt @ 2008-08-19 1:53 UTC (permalink / raw)
To: Steven Rostedt
Cc: Paul E. McKenney, Mathieu Desnoyers, linux-kernel, linuxppc-dev,
Steven Rostedt, Scott Wood, Eran Liberty
In-Reply-To: <alpine.DEB.1.10.0808181425090.796@gandalf.stny.rr.com>
On Mon, 2008-08-18 at 14:27 -0400, Steven Rostedt wrote:
>
> On Mon, 18 Aug 2008, Scott Wood wrote:
>
> > Mathieu Desnoyers wrote:
> > > asm volatile (
> > > "1: lwz %1, 0(%2)\n"
> > > " cmpw %1, %5\n"
> > > " bne 2f\n"
> > > " stwu %3, 0(%2)\n"
> > > "2:\n"
> > > ".section .fixup, \"ax\"\n"
> > > "3: li %0, 1\n"
> > > " b 2b\n"
> > > ".previous\n"
> > > ".section __ex_table,\"a\"\n"
> > > _ASM_ALIGN "\n"
> > > _ASM_PTR "1b, 3b\n"
> > > ".previous"
> > > : "=r"(faulted), "=r"(replaced)
> > > : "r"(ip), "r"(new),
> > > "0"(faulted), "r"(old)
> > > : "memory");
> >
> > Some (most likely unrelated) nits in the above inline asm:
Why not use __get_user/__put_user ?
Cheers,
Ben.
^ permalink raw reply
* Re: Finding cpuid in entry_64.S
From: Benjamin Herrenschmidt @ 2008-08-19 1:59 UTC (permalink / raw)
To: Mitesh R. Meswani; +Cc: linuxppc-dev
In-Reply-To: <BLU103-DS41DBE50328F80B52EA442936E0@phx.gbl>
On Mon, 2008-08-18 at 17:33 -0600, Mitesh R. Meswani wrote:
> Hello
>
> I am trying to find the cpuid when the functions that handle return
> from context switch and interrupts are called, based on the cpu the
> return code is executing on, I want to take some specific actions.
What are you trying to do more precisely ? It sounds like the wrong
solution to whatever problem you have ...
Ben.
^ permalink raw reply
* Re: ftrace introduces instability into kernel 2.6.27(-rc2,-rc3)
From: Benjamin Herrenschmidt @ 2008-08-19 1:54 UTC (permalink / raw)
To: Mathieu Desnoyers
Cc: Paul E. McKenney, linux-kernel, rostedt, linuxppc-dev,
Steven Rostedt, Eran Liberty
In-Reply-To: <20080818184158.GA1798@Krystal>
> > Oops: Exception in kernel mode, sig: 11 [#1]
> > Exsw1600
> > Modules linked in:
> > NIP: c00bbb20 LR: c00bbb20 CTR: 00000000
> > REGS: dd5b1c50 TRAP: 0700 Not tainted (2.6.27-rc2)
> > MSR: 00029000 <EE,ME> CR: 24082282 XER: 20000000
> > TASK = ddcce060[1707] 'find' THREAD: dd5b0000
> > GPR00: 00000000 dd5b1d00 ddcce060 dd801180 dd5b1d68 dd5b1d58 dd80125b
> > 100234ec
> > GPR08: c0800000 00019330 0000ffff dd5b1d20 24000288 100ad874 100936f8
> > 1008a1d0
> > GPR16: 10083f80 dd5b1e2c dd5b1d68 fffffff4 c0380000 dd5b1d60 dd5b1d58
> > dd802084
> > GPR24: dc3d7700 dd802018 dd5b1d68 c0380000 dd801180 dd5b1d68 00000000
> > dd5b1d00
> > NIP [c00bbb20] d_lookup+0x40/0x90
> > LR [c00bbb20] d_lookup+0x40/0x90
> > Call Trace:
> > [dd5b1d00] [dd5b1d58] 0xdd5b1d58 (unreliable)
>
> Can you check if, at some point during the system execution (starting
> from boot), 0xdd5b1d58 is an address where a module is loaded ? (the
> module can be later unloaded, what I wonder is if this address would
> appear to have had a loaded+unloaded module).
>
> Actually, could you try to compile your kernel without "MODULE_UNLOAD" ?
I've had similar crashes (with similar backtraces in the VFS) on
machines with no modules, netbooted zImages.
Ben.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox