* [PATCH 1/1 v4] AMCC PPC 460SX redwood SoC platform initial framework
From: Madhulika Madishetty @ 2009-02-05 23:31 UTC (permalink / raw)
To: linuxppc-dev
From: Madhulika Madishetty <mmadishetty@amcc.com>
This patch contains initial framework for the AMCC Redwood board.
Signed-off-by: Madhulika Madishetty <mmadishetty@amcc.com>
Signed-off-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Vidhyananth Venkatasamy <vvenkatasamy@amcc.com>
Signed-off-by: Preetesh Parekh <pparekh@amcc.com>
Acked-by: Loc Ho <lho@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
---
arch/powerpc/boot/dts/redwood.dts | 244 ++++++
arch/powerpc/configs/44x/redwood_defconfig | 1176 =
++++++++++++++++++++++++++++
arch/powerpc/kernel/cpu_setup_44x.S | 1 +
arch/powerpc/kernel/cputable.c | 14 +
arch/powerpc/platforms/44x/Kconfig | 19 +
arch/powerpc/platforms/44x/ppc44x_simple.c | 1 +
6 files changed, 1455 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/redwood.dts
create mode 100644 arch/powerpc/configs/44x/redwood_defconfig
diff --git a/arch/powerpc/boot/dts/redwood.dts =
b/arch/powerpc/boot/dts/redwood.dts
new file mode 100644
index 0000000..ad402c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -0,0 +1,244 @@
+/*
+ * Device Tree Source for AMCC Redwood(460SX)
+ *
+ * Copyright 2008 AMCC <tmarri@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells =3D <2>;
+ #size-cells =3D <1>;
+ model =3D "amcc,redwood";
+ compatible =3D "amcc,redwood";
+ dcr-parent =3D <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 =3D &EMAC0;
+ serial0 =3D &UART0;
+ };
+
+ cpus {
+ #address-cells =3D <1>;
+ #size-cells =3D <0>;
+
+ cpu@0 {
+ device_type =3D "cpu";
+ model =3D "PowerPC,460SX";
+ reg =3D <0x00000000>;
+ clock-frequency =3D <0>; /* Filled in by U-Boot */
+ timebase-frequency =3D <0>; /* Filled in by U-Boot */
+ i-cache-line-size =3D <32>;
+ d-cache-line-size =3D <32>;
+ i-cache-size =3D <32768>;
+ d-cache-size =3D <32768>;
+ dcr-controller;
+ dcr-access-method =3D "native";
+ };
+ };
+
+ memory {
+ device_type =3D "memory";
+ reg =3D <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible =3D "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index =3D <0>;
+ dcr-reg =3D <0x0c0 0x009>;
+ #address-cells =3D <0>;
+ #size-cells =3D <0>;
+ #interrupt-cells =3D <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible =3D "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index =3D <1>;
+ dcr-reg =3D <0x0d0 0x009>;
+ #address-cells =3D <0>;
+ #size-cells =3D <0>;
+ #interrupt-cells =3D <2>;
+ interrupts =3D <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent =3D <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible =3D "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index =3D <2>;
+ dcr-reg =3D <0x0e0 0x009>;
+ #address-cells =3D <0>;
+ #size-cells =3D <0>;
+ #interrupt-cells =3D <2>;
+ interrupts =3D <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent =3D <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible =3D "ibm,uic-460sx","ibm,uic";
+ interrupt-controller;
+ cell-index =3D <3>;
+ dcr-reg =3D <0x0f0 0x009>;
+ #address-cells =3D <0>;
+ #size-cells =3D <0>;
+ #interrupt-cells =3D <2>;
+ interrupts =3D <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent =3D <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible =3D "ibm,sdr-460sx";
+ dcr-reg =3D <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible =3D "ibm,cpr-460sx";
+ dcr-reg =3D <0x00c 0x002>;
+ };
+
+ plb {
+ compatible =3D "ibm,plb-460sx", "ibm,plb4";
+ #address-cells =3D <2>;
+ #size-cells =3D <1>;
+ ranges;
+ clock-frequency =3D <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible =3D "ibm,sdram-460sx", "ibm,sdram-405gp";
+ dcr-reg =3D <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible =3D "ibm,mcmal-460sx", "ibm,mcmal2";
+ dcr-reg =3D <0x180 0x62>;
+ num-tx-chans =3D <4>;
+ num-rx-chans =3D <32>;
+ #address-cells =3D <1>;
+ #size-cells =3D <1>;
+ interrupt-parent =3D <&UIC1>;
+ interrupts =3D < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x1 0x4
+ /*TXDE*/ 0x2 0x4
+ /*RXDE*/ 0x3 0x4
+ /*COAL TX0*/ 0x18 0x2
+ /*COAL TX1*/ 0x19 0x2
+ /*COAL TX2*/ 0x1a 0x2
+ /*COAL TX3*/ 0x1b 0x2
+ /*COAL RX0*/ 0x1c 0x2
+ /*COAL RX1*/ 0x1d 0x2
+ /*COAL RX2*/ 0x1e 0x2
+ /*COAL RX3*/ 0x1f 0x2>;
+ };
+
+ POB0: opb {
+ compatible =3D "ibm,opb-460sx", "ibm,opb";
+ #address-cells =3D <1>;
+ #size-cells =3D <1>;
+ ranges =3D <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency =3D <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible =3D "ibm,ebc-460sx", "ibm,ebc";
+ dcr-reg =3D <0x012 0x002>;
+ #address-cells =3D <2>;
+ #size-cells =3D <1>;
+ clock-frequency =3D <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts =3D <0x6 0x4>;
+ interrupt-parent =3D <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible =3D "amd,s29gl512n", "cfi-flash";
+ bank-width =3D <2>;
+ reg =3D <0x0000000 0x00000000 0x04000000>;
+ #address-cells =3D <1>;
+ #size-cells =3D <1>;
+ partition@0 {
+ label =3D "kernel";
+ reg =3D <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label =3D "dtb";
+ reg =3D <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label =3D "ramdisk";
+ reg =3D <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label =3D "jffs2";
+ reg =3D <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label =3D "user";
+ reg =3D <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label =3D "env";
+ reg =3D <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label =3D "u-boot";
+ reg =3D <0x03fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600200 {
+ device_type =3D "serial";
+ compatible =3D "ns16550";
+ reg =3D <0xef600200 0x00000008>;
+ virtual-reg =3D <0xef600200>;
+ clock-frequency =3D <0>; /* Filled in by U-Boot */
+ current-speed =3D <0>; /* Filled in by U-Boot */
+ interrupt-parent =3D <&UIC0>;
+ interrupts =3D <0x0 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef600900 {
+ compatible =3D "ibm,rgmii-460sx", "ibm,rgmii";
+ reg =3D <0xef600900 0x00000008>;
+ };
+
+ EMAC0: ethernet@ef600a00 {
+ device_type =3D "network";
+ compatible =3D "ibm,emac-460sx", "ibm,emac4";
+ interrupt-parent =3D <&EMAC0>;
+ interrupts =3D <0x0 0x1>;
+ #interrupt-cells =3D <1>;
+ #address-cells =3D <0>;
+ #size-cells =3D <0>;
+ interrupt-map =3D </*Status*/ 0x0 &UIC0 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x1d 0x4>;
+ reg =3D <0xef600a00 0x00000070>;
+ local-mac-address =3D [000000000000]; /* Filled in by U-Boot */
+ mal-device =3D <&MAL0>;
+ mal-tx-channel =3D <0>;
+ mal-rx-channel =3D <0>;
+ cell-index =3D <0>;
+ max-frame-size =3D <9000>;
+ rx-fifo-size =3D <4096>;
+ tx-fifo-size =3D <2048>;
+ phy-mode =3D "rgmii";
+ phy-map =3D <0x00000000>;
+ rgmii-device =3D <&RGMII0>;
+ rgmii-channel =3D <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ };
+
+ };
+ chosen {
+ linux,stdout-path =3D "/plb/opb/serial@ef600200";
+ };
+
+};
diff --git a/arch/powerpc/configs/44x/redwood_defconfig =
b/arch/powerpc/configs/44x/redwood_defconfig
new file mode 100644
index 0000000..e665433
--- /dev/null
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -0,0 +1,1176 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Wed Feb 4 14:31:09 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=3Dy
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=3Dy
+CONFIG_4xx=3Dy
+CONFIG_BOOKE=3Dy
+CONFIG_PTE_64BIT=3Dy
+CONFIG_PHYS_64BIT=3Dy
+CONFIG_PPC_MMU_NOHASH=3Dy
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=3Dy
+CONFIG_PPC32=3Dy
+CONFIG_WORD_SIZE=3D32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=3Dy
+CONFIG_MMU=3Dy
+CONFIG_GENERIC_CMOS_UPDATE=3Dy
+CONFIG_GENERIC_TIME=3Dy
+CONFIG_GENERIC_TIME_VSYSCALL=3Dy
+CONFIG_GENERIC_CLOCKEVENTS=3Dy
+CONFIG_GENERIC_HARDIRQS=3Dy
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=3Dy
+CONFIG_STACKTRACE_SUPPORT=3Dy
+CONFIG_HAVE_LATENCYTOP_SUPPORT=3Dy
+CONFIG_LOCKDEP_SUPPORT=3Dy
+CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy
+CONFIG_ARCH_HAS_ILOG2_U32=3Dy
+CONFIG_GENERIC_HWEIGHT=3Dy
+CONFIG_GENERIC_CALIBRATE_DELAY=3Dy
+CONFIG_GENERIC_FIND_NEXT_BIT=3Dy
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=3Dy
+CONFIG_EARLY_PRINTK=3Dy
+CONFIG_GENERIC_NVRAM=3Dy
+CONFIG_SCHED_OMIT_FRAME_POINTER=3Dy
+CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy
+CONFIG_PPC_OF=3Dy
+CONFIG_OF=3Dy
+CONFIG_PPC_UDBG_16550=3Dy
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=3Dy
+CONFIG_GENERIC_BUG=3Dy
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=3Dy
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=3Dy
+CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=3Dy
+CONFIG_BROKEN_ON_SMP=3Dy
+CONFIG_INIT_ENV_ARG_LIMIT=3D32
+CONFIG_LOCALVERSION=3D""
+CONFIG_LOCALVERSION_AUTO=3Dy
+CONFIG_SWAP=3Dy
+CONFIG_SYSVIPC=3Dy
+CONFIG_SYSVIPC_SYSCTL=3Dy
+CONFIG_POSIX_MQUEUE=3Dy
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=3Dy
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=3D14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=3Dy
+CONFIG_SYSFS_DEPRECATED_V2=3Dy
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=3Dy
+CONFIG_INITRAMFS_SOURCE=3D""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=3Dy
+CONFIG_EMBEDDED=3Dy
+CONFIG_SYSCTL_SYSCALL=3Dy
+CONFIG_KALLSYMS=3Dy
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=3Dy
+CONFIG_PRINTK=3Dy
+CONFIG_BUG=3Dy
+CONFIG_ELF_CORE=3Dy
+CONFIG_COMPAT_BRK=3Dy
+CONFIG_BASE_FULL=3Dy
+CONFIG_FUTEX=3Dy
+CONFIG_ANON_INODES=3Dy
+CONFIG_EPOLL=3Dy
+CONFIG_SIGNALFD=3Dy
+CONFIG_TIMERFD=3Dy
+CONFIG_EVENTFD=3Dy
+CONFIG_SHMEM=3Dy
+CONFIG_AIO=3Dy
+CONFIG_VM_EVENT_COUNTERS=3Dy
+CONFIG_PCI_QUIRKS=3Dy
+CONFIG_SLUB_DEBUG=3Dy
+# CONFIG_SLAB is not set
+CONFIG_SLUB=3Dy
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=3Dy
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=3Dy
+CONFIG_HAVE_IOREMAP_PROT=3Dy
+CONFIG_HAVE_KPROBES=3Dy
+CONFIG_HAVE_KRETPROBES=3Dy
+CONFIG_HAVE_ARCH_TRACEHOOK=3Dy
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=3Dy
+CONFIG_RT_MUTEXES=3Dy
+CONFIG_BASE_SMALL=3D0
+CONFIG_MODULES=3Dy
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=3Dy
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=3Dy
+CONFIG_LBD=3Dy
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=3Dy
+CONFIG_IOSCHED_AS=3Dy
+CONFIG_IOSCHED_DEADLINE=3Dy
+CONFIG_IOSCHED_CFQ=3Dy
+CONFIG_DEFAULT_AS=3Dy
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED=3D"anticipatory"
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=3Dy
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+CONFIG_REDWOOD=3Dy
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=3Dy
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_460SX=3Dy
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=3Dy
+CONFIG_NO_HZ=3Dy
+CONFIG_HIGH_RES_TIMERS=3Dy
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=3Dy
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=3D250
+CONFIG_SCHED_HRTICK=3Dy
+CONFIG_PREEMPT_NONE=3Dy
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=3Dy
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=3Dy
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy
+CONFIG_ARCH_HAS_WALK_MEMORY=3Dy
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=3Dy
+CONFIG_ARCH_FLATMEM_ENABLE=3Dy
+CONFIG_ARCH_POPULATES_NODE_MAP=3Dy
+CONFIG_SELECT_MEMORY_MODEL=3Dy
+CONFIG_FLATMEM_MANUAL=3Dy
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=3Dy
+CONFIG_FLAT_NODE_MEM_MAP=3Dy
+CONFIG_PAGEFLAGS_EXTENDED=3Dy
+CONFIG_SPLIT_PTLOCK_CPUS=3D4
+CONFIG_MIGRATION=3Dy
+CONFIG_PHYS_ADDR_T_64BIT=3Dy
+CONFIG_ZONE_DMA_FLAG=3D1
+CONFIG_BOUNCE=3Dy
+CONFIG_VIRT_TO_BUS=3Dy
+CONFIG_UNEVICTABLE_LRU=3Dy
+CONFIG_PPC_4K_PAGES=3Dy
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=3D11
+CONFIG_PROC_DEVICETREE=3Dy
+CONFIG_CMDLINE_BOOL=3Dy
+CONFIG_CMDLINE=3D""
+CONFIG_EXTRA_TARGETS=3D""
+CONFIG_SECCOMP=3Dy
+CONFIG_ISA_DMA_API=3Dy
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=3Dy
+CONFIG_PPC_INDIRECT_PCI=3Dy
+CONFIG_4xx_SOC=3Dy
+CONFIG_PPC_PCI_CHOICE=3Dy
+CONFIG_PCI=3Dy
+CONFIG_PCI_DOMAINS=3Dy
+CONFIG_PCI_SYSCALL=3Dy
+CONFIG_PCIEPORTBUS=3Dy
+CONFIG_PCIEAER=3Dy
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=3Dy
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=3Dy
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=3D0x30000000
+CONFIG_PAGE_OFFSET=3D0xc0000000
+CONFIG_KERNEL_START=3D0xc0000000
+CONFIG_PHYSICAL_START=3D0x00000000
+CONFIG_TASK_SIZE=3D0xc0000000
+CONFIG_CONSISTENT_START=3D0xff100000
+CONFIG_CONSISTENT_SIZE=3D0x00200000
+CONFIG_NET=3Dy
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=3Dy
+CONFIG_PACKET=3Dy
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=3Dy
+# CONFIG_NET_KEY is not set
+CONFIG_INET=3Dy
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=3Dy
+CONFIG_IP_PNP=3Dy
+CONFIG_IP_PNP_DHCP=3Dy
+CONFIG_IP_PNP_BOOTP=3Dy
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=3Dy
+CONFIG_INET_TCP_DIAG=3Dy
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=3Dy
+CONFIG_DEFAULT_TCP_CONG=3D"cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=3Dy
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=3Dy
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug"
+CONFIG_STANDALONE=3Dy
+CONFIG_PREVENT_FIRMWARE_BUILD=3Dy
+CONFIG_FW_LOADER=3Dy
+CONFIG_FIRMWARE_IN_KERNEL=3Dy
+CONFIG_EXTRA_FIRMWARE=3D""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=3Dy
+CONFIG_PROC_EVENTS=3Dy
+CONFIG_MTD=3Dy
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=3Dy
+CONFIG_MTD_PARTITIONS=3Dy
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=3Dy
+CONFIG_MTD_OF_PARTS=3Dy
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=3Dy
+CONFIG_MTD_BLKDEVS=3Dy
+CONFIG_MTD_BLOCK=3Dy
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=3Dy
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=3Dy
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=3Dy
+CONFIG_MTD_MAP_BANK_WIDTH_2=3Dy
+CONFIG_MTD_MAP_BANK_WIDTH_4=3Dy
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=3Dy
+CONFIG_MTD_CFI_I2=3Dy
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=3Dy
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=3Dy
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=3Dy
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=3Dy
+CONFIG_OF_I2C=3Dy
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=3Dy
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=3Dy
+CONFIG_BLK_DEV_RAM_COUNT=3D16
+CONFIG_BLK_DEV_RAM_SIZE=3D35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=3Dy
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=3Dy
+CONFIG_SCSI_DMA=3Dy
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=3Dy
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=3Dy
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=3Dy
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=3Dm
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=3Dy
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=3Dy
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=3Dy
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=3Dy
+CONFIG_FUSION_MAX_SGE=3D128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=3Dy
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=3Dy
+CONFIG_I2O_EXT_ADAPTEC=3Dy
+# CONFIG_I2O_CONFIG is not set
+# CONFIG_I2O_BUS is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=3Dy
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=3Dy
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=3Dy
+CONFIG_IBM_NEW_EMAC_RXB=3D256
+CONFIG_IBM_NEW_EMAC_TXB=3D256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=3D32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=3D256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=3D0
+CONFIG_IBM_NEW_EMAC_DEBUG=3Dy
+CONFIG_IBM_NEW_EMAC_ZMII=3Dy
+CONFIG_IBM_NEW_EMAC_RGMII=3Dy
+CONFIG_IBM_NEW_EMAC_TAH=3Dy
+CONFIG_IBM_NEW_EMAC_EMAC4=3Dy
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=3Dy
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=3Dy
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=3Dy
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=3Dy
+CONFIG_SERIAL_8250_CONSOLE=3Dy
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=3D1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3D1
+CONFIG_SERIAL_8250_EXTENDED=3Dy
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=3Dy
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=3Dy
+CONFIG_SERIAL_CORE_CONSOLE=3Dy
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=3Dy
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=3Dy
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=3Dy
+CONFIG_LEGACY_PTY_COUNT=3D256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=3Dy
+CONFIG_I2C=3Dy
+CONFIG_I2C_BOARDINFO=3Dy
+CONFIG_I2C_CHARDEV=3Dy
+CONFIG_I2C_HELPER_AUTO=3Dy
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=3Dy
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=3Dy
+CONFIG_I2C_DEBUG_ALGO=3Dy
+CONFIG_I2C_DEBUG_BUS=3Dy
+CONFIG_I2C_DEBUG_CHIP=3Dy
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=3Dy
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=3Dy
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=3Dy
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=3Dm
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=3Dy
+
+#
+# DMA Devices
+#
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=3Dy
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=3Dy
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=3Dy
+CONFIG_INOTIFY=3Dy
+CONFIG_INOTIFY_USER=3Dy
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=3Dy
+CONFIG_PROC_KCORE=3Dy
+CONFIG_PROC_SYSCTL=3Dy
+CONFIG_PROC_PAGE_MONITOR=3Dy
+CONFIG_SYSFS=3Dy
+CONFIG_TMPFS=3Dy
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=3Dy
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=3Dy
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=3Dy
+CONFIG_NFS_FS=3Dy
+CONFIG_NFS_V3=3Dy
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=3Dy
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=3Dy
+CONFIG_LOCKD_V4=3Dy
+CONFIG_NFS_COMMON=3Dy
+CONFIG_SUNRPC=3Dy
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=3Dy
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=3Dy
+CONFIG_GENERIC_FIND_LAST_BIT=3Dy
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=3Dy
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=3Dy
+CONFIG_PLIST=3Dy
+CONFIG_HAS_IOMEM=3Dy
+CONFIG_HAS_IOPORT=3Dy
+CONFIG_HAS_DMA=3Dy
+CONFIG_HAVE_LMB=3Dy
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=3Dy
+CONFIG_ENABLE_MUST_CHECK=3Dy
+CONFIG_FRAME_WARN=3D1024
+CONFIG_MAGIC_SYSRQ=3Dy
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=3Dy
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=3Dy
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=3Dy
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=3D0
+CONFIG_SCHED_DEBUG=3Dy
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=3Dy
+CONFIG_HAVE_FUNCTION_TRACER=3Dy
+CONFIG_HAVE_DYNAMIC_FTRACE=3Dy
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=3Dy
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=3Dy
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=3D64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=3Dy
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=3Dy
+CONFIG_CRYPTO_ALGAPI2=3Dy
+CONFIG_CRYPTO_AEAD=3Dy
+CONFIG_CRYPTO_AEAD2=3Dy
+CONFIG_CRYPTO_BLKCIPHER=3Dy
+CONFIG_CRYPTO_BLKCIPHER2=3Dy
+CONFIG_CRYPTO_HASH=3Dy
+CONFIG_CRYPTO_HASH2=3Dy
+CONFIG_CRYPTO_RNG=3Dy
+CONFIG_CRYPTO_RNG2=3Dy
+CONFIG_CRYPTO_MANAGER=3Dy
+CONFIG_CRYPTO_MANAGER2=3Dy
+CONFIG_CRYPTO_GF128MUL=3Dy
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_CRYPTD=3Dy
+CONFIG_CRYPTO_AUTHENC=3Dy
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=3Dy
+CONFIG_CRYPTO_GCM=3Dy
+CONFIG_CRYPTO_SEQIV=3Dy
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=3Dy
+CONFIG_CRYPTO_CTR=3Dy
+CONFIG_CRYPTO_CTS=3Dy
+CONFIG_CRYPTO_ECB=3Dy
+CONFIG_CRYPTO_LRW=3Dy
+CONFIG_CRYPTO_PCBC=3Dy
+CONFIG_CRYPTO_XTS=3Dy
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=3Dy
+CONFIG_CRYPTO_XCBC=3Dy
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_MD4=3Dy
+CONFIG_CRYPTO_MD5=3Dy
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=3Dy
+CONFIG_CRYPTO_SHA256=3Dy
+CONFIG_CRYPTO_SHA512=3Dy
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=3Dy
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=3Dy
+CONFIG_CRYPTO_BLOWFISH=3Dy
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=3Dy
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=3Dy
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S =
b/arch/powerpc/kernel/cpu_setup_44x.S
index 10b4ab1..7d606f8 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -34,6 +34,7 @@ _GLOBAL(__setup_cpu_440grx)
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
+_GLOBAL(__setup_cpu_460sx)
mflr r4
bl __init_fpu_44x
bl __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c =
b/arch/powerpc/kernel/cputable.c
index 923f87a..414e9aa 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -43,6 +43,7 @@ extern void __setup_cpu_440spe(unsigned long offset, =
struct cpu_spec* spec);
extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* =
spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* =
spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* =
spec);
+extern void __setup_cpu_460sx(unsigned long offset, struct cpu_spec =
*spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* =
spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* =
spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* =
spec);
@@ -1634,6 +1635,19 @@ static struct cpu_spec __initdata cpu_specs[] =3D =
{
.machine_check =3D machine_check_440A,
.platform =3D "ppc440",
},
+ { /* 460SX */
+ .pvr_mask =3D 0xffffff00,
+ .pvr_value =3D 0x13541800,
+ .cpu_name =3D "460SX",
+ .cpu_features =3D CPU_FTRS_44X,
+ .cpu_user_features =3D COMMON_USER_BOOKE,
+ .mmu_features =3D MMU_FTR_TYPE_44x,
+ .icache_bsize =3D 32,
+ .dcache_bsize =3D 32,
+ .cpu_setup =3D __setup_cpu_460sx,
+ .machine_check =3D machine_check_440A,
+ .platform =3D "ppc440",
+ },
{ /* default match */
.pvr_mask =3D 0x00000000,
.pvr_value =3D 0x00000000,
diff --git a/arch/powerpc/platforms/44x/Kconfig =
b/arch/powerpc/platforms/44x/Kconfig
index 3496bc0..bf5c7ff 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -118,6 +118,17 @@ config GLACIER
help
This option enables support for the AMCC PPC460GT evaluation board.
=20
+config REDWOOD
+ bool "Redwood"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 460SX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC460SX Redwood board.
+
config YOSEMITE
bool "Yosemite"
depends on 44x
@@ -220,6 +231,14 @@ config 460EX
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_TAH
=20
+config 460SX
+ bool
+ select PPC_FPU
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ select IBM_NEW_EMAC_TAH
+
# 44x errata/workaround config symbols, selected by the CPU models =
above
config IBM440EP_ERR42
bool
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c =
b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 76fdc51..5bcd441 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -57,6 +57,7 @@ static char *board[] __initdata =3D {
"ibm,ebony",
"amcc,katmai",
"amcc,rainier",
+ "amcc,redwood",
"amcc,sequoia",
"amcc,taishan",
"amcc,yosemite"
--=20
1.5.5
^ permalink raw reply related
* Html attachments
From: Stephen Rothwell @ 2009-02-05 23:51 UTC (permalink / raw)
To: ppc-dev
[-- Attachment #1: Type: text/plain, Size: 311 bytes --]
Hi all,
I have reconfigured the list to hold any emails with html attachments for
moderator approval. So if you don't want your mail to be delayed, do not
post html mail to this list.
Thanks.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Build breakage for CONFIG_PM but no CONFIG_SUSPEND
From: Michael Neuling @ 2009-02-06 0:10 UTC (permalink / raw)
To: benh, Scott Wood; +Cc: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 1057 bytes --]
I noticed this doing some randconfig testing (.config below). I have
CONFIG_PM but no CONFIG_SUSPEND. Bug is against mainline.
arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2
Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
CONFIG_SUSPEND. d49747bdfb2ddebea24d1580da55b79d093d48a9 introduced
this.
Maybe this fixes it?
Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/sysdev/ipic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 88a983e..9a89cd3 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -890,7 +890,7 @@ unsigned int ipic_get_irq(void)
return irq_linear_revmap(primary_ipic->irqhost, irq);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_SUSPEND
static struct {
u32 sicfr;
u32 siprr[2];
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 38737 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc3
# Fri Feb 6 10:32:48 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLQB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
# CONFIG_FREEZER is not set
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
CONFIG_PPC_MPC512x=y
CONFIG_PPC_MPC5121=y
CONFIG_MPC5121_ADS=y
CONFIG_MPC5121_GENERIC=y
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_PPC_82xx=y
# CONFIG_MPC8272_ADS is not set
CONFIG_PQ2FADS=y
# CONFIG_EP8248E is not set
# CONFIG_MGCOGE is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_PQ2_ADS_PCI_PIC=y
CONFIG_PPC_83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC836x_RDK is not set
# CONFIG_MPC837x_MDS is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
CONFIG_ASP834x=y
CONFIG_PPC_MPC831x=y
CONFIG_PPC_MPC834x=y
CONFIG_PPC_86xx=y
CONFIG_MPC8641_HPCN=y
# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
CONFIG_GEF_SBC310=y
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
CONFIG_MPC8610=y
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_IPIC=y
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPU Frequency drivers
#
# CONFIG_TAU is not set
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
CONFIG_MCU_MPC8349EMITX=m
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCI_8260=y
CONFIG_8260_PCI9=y
CONFIG_8260_PCI9_IDMA1=y
# CONFIG_8260_PCI9_IDMA2 is not set
# CONFIG_8260_PCI9_IDMA3 is not set
# CONFIG_8260_PCI9_IDMA4 is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HAS_RAPIDIO=y
# CONFIG_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc2000000
CONFIG_PHYSICAL_START=0x02000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_ATM=m
# CONFIG_ATM_LANE is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
# CONFIG_YAM is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not set
# CONFIG_MAC80211_RC_MINSTREL is not set
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_TKIP_DEBUG is not set
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_PARTITIONS is not set
CONFIG_MTD_TESTS=m
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_32=y
# CONFIG_MTD_CFI_I1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_SBC8240 is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
CONFIG_MTD_UBI_DEBUG=y
CONFIG_MTD_UBI_DEBUG_MSG=y
# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
CONFIG_MTD_UBI_DEBUG_DISABLE_BGT=y
# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES=y
#
# Additional UBI debugging messages
#
CONFIG_MTD_UBI_DEBUG_MSG_BLD=y
CONFIG_MTD_UBI_DEBUG_MSG_EBA=y
CONFIG_MTD_UBI_DEBUG_MSG_WL=y
CONFIG_MTD_UBI_DEBUG_MSG_IO=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set
# CONFIG_IEEE1394_PCILYNX is not set
#
# SBP-2 support (for storage devices) requires SCSI
#
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=y
CONFIG_VETH=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_E100 is not set
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_ATL2=m
# CONFIG_FS_ENET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=m
CONFIG_E1000E=y
CONFIG_IP1000=m
# CONFIG_IGB is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=y
# CONFIG_R8169 is not set
CONFIG_SIS190=m
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_GIANFAR=m
# CONFIG_UCC_GETH is not set
CONFIG_MV643XX_ETH=y
CONFIG_QLA3XXX=m
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set
CONFIG_MLX4_CORE=m
# CONFIG_TR is not set
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
# CONFIG_WLAN_80211 is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
#
# Enable USB support to see WiMAX USB drivers
#
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
CONFIG_PC300TOO=y
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=m
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=y
# CONFIG_MISDN is not set
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF50633_PMU=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=m
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_SX is not set
CONFIG_RIO=y
# CONFIG_RIO_OLDPCI is not set
# CONFIG_STALDRV is not set
CONFIG_NOZOMI=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_MPC52xx is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_QE=m
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_BRIQ_PANEL is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_RTAS is not set
CONFIG_HVC_UDBG=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_R3964=y
CONFIG_APPLICOM=m
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# Mac SMBus host controller drivers
#
# CONFIG_I2C_HYDRA is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_PCA9539=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=m
#
# SPI GPIO expanders:
#
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SILENT=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=y
CONFIG_TPS65010=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM8350=m
CONFIG_MFD_WM8350_I2C=m
CONFIG_MFD_PCF50633=m
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=m
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
# CONFIG_MEDIA_TUNER_XC5000 is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
CONFIG_VIDEO_SAA5246A=m
# CONFIG_VIDEO_SAA5249 is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_HEXIUM_ORION=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
CONFIG_RADIO_MAXIRADIO=m
# CONFIG_RADIO_MAESTRO is not set
CONFIG_RADIO_TEA5764=m
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=m
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_VGA16=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_FSL_DIU=m
# CONFIG_FB_TMIO is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_LOGO is not set
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
CONFIG_HID_PID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
# CONFIG_HID_APPLE is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_UWB=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=m
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=y
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PPC is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_FS_POSIX_ACL=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS is not set
CONFIG_UCC_SLOW=y
CONFIG_UCC=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SLQB_DEBUG=y
# CONFIG_SLQB_DEBUG_ON is not set
CONFIG_SLQB_SYSFS=y
# CONFIG_SLQB_STATS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=m
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply related
* ftrace compile error with 32 bit PPC with mainline
From: Michael Neuling @ 2009-02-06 2:37 UTC (permalink / raw)
To: Steven Rostedt; +Cc: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 689 bytes --]
I get the following compile error with ftrace with mainline with the
attached config (made with randconfig)
/home/mikey/src/linux-2.6-ozlabs/arch/powerpc/kernel/ftrace.c: In function ‘__ftrace_make_call’:
/home/mikey/src/linux-2.6-ozlabs/arch/powerpc/kernel/ftrace.c:443: error: dereferencing pointer to incomplete type
/home/mikey/src/linux-2.6-ozlabs/arch/powerpc/kernel/ftrace.c:443: error: dereferencing pointer to incomplete type
/home/mikey/src/linux-2.6-ozlabs/arch/powerpc/kernel/ftrace.c:443: error: dereferencing pointer to incomplete type
/home/mikey/src/linux-2.6-ozlabs/arch/powerpc/kernel/ftrace.c:450: error: dereferencing pointer to incomplete type
Mikey
[-- Attachment #2: ftrace.config --]
[-- Type: text/plain, Size: 37402 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc3
# Fri Feb 6 11:53:28 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_6xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
CONFIG_PPC_MPC512x=y
CONFIG_PPC_MPC5121=y
CONFIG_MPC5121_ADS=y
CONFIG_MPC5121_GENERIC=y
CONFIG_PPC_MPC52xx=y
# CONFIG_PPC_MPC5200_SIMPLE is not set
CONFIG_PPC_EFIKA=y
# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_GPIO=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC836x_MDS=y
# CONFIG_MPC836x_RDK is not set
# CONFIG_MPC837x_MDS is not set
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
CONFIG_ASP834x=y
CONFIG_PPC_MPC831x=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
CONFIG_STORCENTER=y
CONFIG_MPC7448HPC2=y
CONFIG_PPC_HOLLY=y
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
CONFIG_MPC10X_STORE_GATHERING=y
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_IPIC=y
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_PPC_MPC106=y
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_PPC_BESTCOMM is not set
CONFIG_MPC8xxx_GPIO=y
CONFIG_SIMPLE_GPIO=y
CONFIG_MCU_MPC8349EMITX=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda2"
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc2000000
CONFIG_PHYSICAL_START=0x02000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
CONFIG_C2PORT=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
#
# SBP-2 support (for storage devices) requires SCSI
#
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_DV1394=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_WINDFARM is not set
CONFIG_MLX4_CORE=y
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=y
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=y
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=y
CONFIG_ISTALLION=y
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_QE=y
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_BRIQ_PANEL=y
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_RTAS is not set
# CONFIG_HVC_UDBG is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_HYDRA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_MPC=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_GPIO=y
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_MPC52xx_PSC is not set
CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_8xxx_WDT is not set
CONFIG_WATCHDOG_RTAS=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SILENT=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_UCB1400_CORE=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_PCF50633=y
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_OF is not set
CONFIG_FB_CT65550=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=y
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS300=y
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=y
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_FM801=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=y
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=y
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_VMIDI is not set
CONFIG_SOUND_TRIX=y
CONFIG_SOUND_MSS=y
CONFIG_SOUND_MPU401=y
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
CONFIG_SOUND_PSS=y
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=y
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_UART6850 is not set
CONFIG_SOUND_AEDSP16=y
# CONFIG_SC6600 is not set
CONFIG_SOUND_KAHLUA=y
CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_TUSB6010 is not set
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_MUSB_DEBUG=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM8350=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM8350=y
# CONFIG_RTC_DRV_PCF50633 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_FSL_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
CONFIG_UIO_SERCOS3=y
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
CONFIG_FS_POSIX_ACL=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_UCC_SLOW=y
CONFIG_UCC=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
CONFIG_FUNCTION_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
CONFIG_TRACE_BRANCH_PROFILING=y
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
CONFIG_BDI_SWITCH=y
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
^ permalink raw reply
* Re: ftrace compile error with 32 bit PPC with mainline
From: Steven Rostedt @ 2009-02-06 2:42 UTC (permalink / raw)
To: Michael Neuling; +Cc: linuxppc-dev
In-Reply-To: <1307.1233887821@neuling.org>
On Fri, 2009-02-06 at 13:37 +1100, Michael Neuling wrote:
> # CONFIG_MODULES is not set
Those are module references. I never tested with modules turned off.
I'll write up a patch tonight.
Thanks,
-- Steve
^ permalink raw reply
* Re: FSL eSDHC bindings update
From: Kumar Gala @ 2009-02-06 2:52 UTC (permalink / raw)
To: avorontsov; +Cc: linuxppc-dev
In-Reply-To: <20090205190403.GA27976@oksana.dev.rtsoft.ru>
On Feb 5, 2009, at 1:04 PM, Anton Vorontsov wrote:
> On Thu, Jan 22, 2009 at 01:15:01PM -0600, Kumar Gala wrote:
>> On Jan 21, 2009, at 8:00 PM, Anton Vorontsov wrote:
>>> This patch adds a new driver: sdhci-of. The driver is similar to
>>> the sdhci-pci, it contains common probe code, and controller-
>>> specific
>>> ops and quirks.
>>>
>>> So far there are only Freescale eSDHC ops and quirks.
>>>
>>> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
>>> ---
>>> drivers/mmc/host/Kconfig | 10 ++
>>> drivers/mmc/host/Makefile | 1 +
>>> drivers/mmc/host/sdhci-of.c | 274 ++++++++++++++++++++++++++++++++
>>> ++
>>> +++++++++
>>> 3 files changed, 285 insertions(+), 0 deletions(-)
>>> create mode 100644 drivers/mmc/host/sdhci-of.c
>>
>> Still griping about lack of OF binding docs for this.
>
> Here they're.
>
> I'm assuming that MPC8536 is the first chip in 85xx family with eSDHC.
thanks. MPC8536 is the first. Do we need a u-boot patch for clock-
frequency on 85xx?
- k
^ permalink raw reply
* Re: [PATCH 1/2] ftrace, powerpc: replace debug macro with proper pr_deug
From: Steven Rostedt @ 2009-02-06 6:07 UTC (permalink / raw)
To: linuxppc-dev, LKML
Cc: Michael Neuling, Steven Rostedt, Paul Mackerras, Ingo Molnar,
Andrew Morton
In-Reply-To: <20090206060527.148611255@goodmis.org>
[ forgot to add linuxppc ]
On Fri, 6 Feb 2009, Steven Rostedt wrote:
> From: Steven Rostedt <srostedt@redhat.com>
>
> Impact: cleanup
>
> The PowerPC ftrace code uses a hacked up DEBUGP macro for prints.
> This patch converts it to the standard pr_debug.
>
> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
> ---
> arch/powerpc/kernel/ftrace.c | 26 ++++++++++----------------
> 1 files changed, 10 insertions(+), 16 deletions(-)
>
> diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
> index 5355244..a913f91 100644
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -20,12 +20,6 @@
> #include <asm/code-patching.h>
> #include <asm/ftrace.h>
>
> -#if 0
> -#define DEBUGP printk
> -#else
> -#define DEBUGP(fmt , ...) do { } while (0)
> -#endif
> -
> static unsigned int ftrace_nop = PPC_NOP_INSTR;
>
> #ifdef CONFIG_PPC32
> @@ -175,7 +169,7 @@ __ftrace_make_nop(struct module *mod,
> * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
> */
>
> - DEBUGP("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
> + pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
>
> /* Find where the trampoline jumps to */
> if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
> @@ -183,7 +177,7 @@ __ftrace_make_nop(struct module *mod,
> return -EFAULT;
> }
>
> - DEBUGP(" %08x %08x", jmp[0], jmp[1]);
> + pr_debug(" %08x %08x", jmp[0], jmp[1]);
>
> /* verify that this is what we expect it to be */
> if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
> @@ -198,18 +192,18 @@ __ftrace_make_nop(struct module *mod,
> offset = (unsigned)((unsigned short)jmp[0]) << 16 |
> (unsigned)((unsigned short)jmp[1]);
>
> - DEBUGP(" %x ", offset);
> + pr_debug(" %x ", offset);
>
> /* get the address this jumps too */
> tramp = mod->arch.toc + offset + 32;
> - DEBUGP("toc: %lx", tramp);
> + pr_debug("toc: %lx", tramp);
>
> if (probe_kernel_read(jmp, (void *)tramp, 8)) {
> printk(KERN_ERR "Failed to read %lx\n", tramp);
> return -EFAULT;
> }
>
> - DEBUGP(" %08x %08x\n", jmp[0], jmp[1]);
> + pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
>
> ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
>
> @@ -286,7 +280,7 @@ __ftrace_make_nop(struct module *mod,
> * 0x4e, 0x80, 0x04, 0x20 bctr
> */
>
> - DEBUGP("ip:%lx jumps to %lx", ip, tramp);
> + pr_debug("ip:%lx jumps to %lx", ip, tramp);
>
> /* Find where the trampoline jumps to */
> if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
> @@ -294,7 +288,7 @@ __ftrace_make_nop(struct module *mod,
> return -EFAULT;
> }
>
> - DEBUGP(" %08x %08x ", jmp[0], jmp[1]);
> + pr_debug(" %08x %08x ", jmp[0], jmp[1]);
>
> /* verify that this is what we expect it to be */
> if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
> @@ -310,7 +304,7 @@ __ftrace_make_nop(struct module *mod,
> if (tramp & 0x8000)
> tramp -= 0x10000;
>
> - DEBUGP(" %x ", tramp);
> + pr_debug(" %x ", tramp);
>
> if (tramp != addr) {
> printk(KERN_ERR
> @@ -413,7 +407,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> /* ld r2,40(r1) */
> op[1] = 0xe8410028;
>
> - DEBUGP("write to %lx\n", rec->ip);
> + pr_debug("write to %lx\n", rec->ip);
>
> if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
> return -EPERM;
> @@ -453,7 +447,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> return -EINVAL;
> }
>
> - DEBUGP("write to %lx\n", rec->ip);
> + pr_debug("write to %lx\n", rec->ip);
>
> if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
> return -EPERM;
> --
> 1.5.6.5
>
> --
>
>
^ permalink raw reply
* Re: [PATCH 2/2] powerpc, ftrace: fix compile error when modules not configured
From: Steven Rostedt @ 2009-02-06 6:07 UTC (permalink / raw)
To: linuxppc-dev, LKML
Cc: Michael Neuling, Steven Rostedt, Paul Mackerras, Ingo Molnar,
Andrew Morton
In-Reply-To: <20090206060527.369616736@goodmis.org>
[ forgot to add linuxppc ]
On Fri, 6 Feb 2009, Steven Rostedt wrote:
> From: Steven Rostedt <srostedt@redhat.com>
>
> Michael Neuling reported a compile bug when dynamic ftrace was
> configured in and modules were not. This was due to the ftrace
> code referencing module specific structures.
>
> Reported-by: Michael Neuling <mikey@neuling.org>
> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
> ---
> arch/powerpc/kernel/ftrace.c | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
> index a913f91..88c641d 100644
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -113,6 +113,8 @@ static int test_24bit_addr(unsigned long ip, unsigned long addr)
> return create_branch((unsigned int *)ip, addr, 0);
> }
>
> +#ifdef CONFIG_MODULES
> +
> static int is_bl_op(unsigned int op)
> {
> return (op & 0xfc000003) == 0x48000001;
> @@ -323,6 +325,7 @@ __ftrace_make_nop(struct module *mod,
> return 0;
> }
> #endif /* PPC64 */
> +#endif /* CONFIG_MODULES */
>
> int ftrace_make_nop(struct module *mod,
> struct dyn_ftrace *rec, unsigned long addr)
> @@ -342,6 +345,7 @@ int ftrace_make_nop(struct module *mod,
> return ftrace_modify_code(ip, old, new);
> }
>
> +#ifdef CONFIG_MODULES
> /*
> * Out of range jumps are called from modules.
> * We should either already have a pointer to the module
> @@ -366,9 +370,13 @@ int ftrace_make_nop(struct module *mod,
> mod = rec->arch.mod;
>
> return __ftrace_make_nop(mod, rec, addr);
> -
> +#else
> + /* We should not get here without modules */
> + return -EINVAL;
> +#endif /* CONFIG_MODULES */
> }
>
> +#ifdef CONFIG_MODULES
> #ifdef CONFIG_PPC64
> static int
> __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> @@ -457,6 +465,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> return 0;
> }
> #endif /* CONFIG_PPC64 */
> +#endif /* CONFIG_MODULES */
>
> int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> {
> @@ -475,6 +484,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> return ftrace_modify_code(ip, old, new);
> }
>
> +#ifdef CONFIG_MODULES
> /*
> * Out of range jumps are called from modules.
> * Being that we are converting from nop, it had better
> @@ -486,6 +496,10 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> }
>
> return __ftrace_make_call(rec, addr);
> +#else
> + /* We should not get here without modules */
> + return -EINVAL;
> +#endif /* CONFIG_MODULES */
> }
>
> int ftrace_update_ftrace_func(ftrace_func_t func)
> --
> 1.5.6.5
>
> --
>
>
^ permalink raw reply
* Re: [PATCH 2/2] powerpc, ftrace: fix compile error when modules not configured
From: Michael Neuling @ 2009-02-06 6:23 UTC (permalink / raw)
To: Steven Rostedt
Cc: linux-kernel, linuxppc-dev, Steven Rostedt, Paul Mackerras,
Ingo Molnar, Andrew Morton
In-Reply-To: <20090206060527.369616736@goodmis.org>
In message <20090206060527.369616736@goodmis.org> you wrote:
> From: Steven Rostedt <srostedt@redhat.com>
>
> Michael Neuling reported a compile bug when dynamic ftrace was
> configured in and modules were not. This was due to the ftrace
> code referencing module specific structures.
>
> Reported-by: Michael Neuling <mikey@neuling.org>
> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Steve,
Thanks, fixes the error I was seeing.
As an aside, is there anyway we can merge some of the code in
arch/powerpc/kernel/ftrace.c between 32 and 64bit? There seems to be a
lot of repeated code in there with only minor changes.
Mikey
> ---
> arch/powerpc/kernel/ftrace.c | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
> index a913f91..88c641d 100644
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -113,6 +113,8 @@ static int test_24bit_addr(unsigned long ip, unsigned lon
g addr)
> return create_branch((unsigned int *)ip, addr, 0);
> }
>
> +#ifdef CONFIG_MODULES
> +
> static int is_bl_op(unsigned int op)
> {
> return (op & 0xfc000003) == 0x48000001;
> @@ -323,6 +325,7 @@ __ftrace_make_nop(struct module *mod,
> return 0;
> }
> #endif /* PPC64 */
> +#endif /* CONFIG_MODULES */
>
> int ftrace_make_nop(struct module *mod,
> struct dyn_ftrace *rec, unsigned long addr)
> @@ -342,6 +345,7 @@ int ftrace_make_nop(struct module *mod,
> return ftrace_modify_code(ip, old, new);
> }
>
> +#ifdef CONFIG_MODULES
> /*
> * Out of range jumps are called from modules.
> * We should either already have a pointer to the module
> @@ -366,9 +370,13 @@ int ftrace_make_nop(struct module *mod,
> mod = rec->arch.mod;
>
> return __ftrace_make_nop(mod, rec, addr);
> -
> +#else
> + /* We should not get here without modules */
> + return -EINVAL;
> +#endif /* CONFIG_MODULES */
> }
>
> +#ifdef CONFIG_MODULES
> #ifdef CONFIG_PPC64
> static int
> __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> @@ -457,6 +465,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long
addr)
> return 0;
> }
> #endif /* CONFIG_PPC64 */
> +#endif /* CONFIG_MODULES */
>
> int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
> {
> @@ -475,6 +484,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned lon
g addr)
> return ftrace_modify_code(ip, old, new);
> }
>
> +#ifdef CONFIG_MODULES
> /*
> * Out of range jumps are called from modules.
> * Being that we are converting from nop, it had better
> @@ -486,6 +496,10 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned lo
ng addr)
> }
>
> return __ftrace_make_call(rec, addr);
> +#else
> + /* We should not get here without modules */
> + return -EINVAL;
> +#endif /* CONFIG_MODULES */
> }
>
> int ftrace_update_ftrace_func(ftrace_func_t func)
> --
> 1.5.6.5
>
> --
>
^ permalink raw reply
* Re: [PATCH 2/2] powerpc, ftrace: fix compile error when modules not configured
From: Steven Rostedt @ 2009-02-06 6:27 UTC (permalink / raw)
To: Michael Neuling
Cc: linux-kernel, linuxppc-dev, Paul Mackerras, Ingo Molnar,
Andrew Morton
In-Reply-To: <12951.1233901432@neuling.org>
On Fri, 2009-02-06 at 17:23 +1100, Michael Neuling wrote:
> In message <20090206060527.369616736@goodmis.org> you wrote:
> > From: Steven Rostedt <srostedt@redhat.com>
> >
> > Michael Neuling reported a compile bug when dynamic ftrace was
> > configured in and modules were not. This was due to the ftrace
> > code referencing module specific structures.
> >
> > Reported-by: Michael Neuling <mikey@neuling.org>
> > Signed-off-by: Steven Rostedt <srostedt@redhat.com>
>
> Steve,
>
> Thanks, fixes the error I was seeing.
Cool.
>
> As an aside, is there anyway we can merge some of the code in
> arch/powerpc/kernel/ftrace.c between 32 and 64bit? There seems to be a
> lot of repeated code in there with only minor changes.
It looks similar, but there's enough differences that I would like to
keep them separate. The code is complex enough and has a lot of subtle
differences between the two archs.
-- Steve
^ permalink raw reply
* MPC5121e, MBX driver, pvr.ko ...
From: David Jander @ 2009-02-06 7:24 UTC (permalink / raw)
To: Linuxppc-dev; +Cc: John Rigby
Hi all,
I have a custom board with a MPC5121e (rev 1.5) on it. It is the latest git
kernel from denx ads5121 head with our BSP mixed in.
I decided to try out Application Note AN3793 from Freescale (3D Graphics on
the ADS512101 Board Using OpenGL ES).
I started trying to load the provided (binary!) kernel modules into our
kernel, but I am geeting errors inserting the modules using
insmod: 'clcdc.ko' complains about not being able to register de device major
number, and 'dbgdrv.ko' oopses with a BUG() in percpu_modfree()! This
function should never be called in a non-SMP kernel, so I suspect there are
some important differences between the kernel I have and the one the
binary-only drivers where built against :-(
In another approach I managed to load the provided kernel binary (which is
built for the ADS512101 evaluation board) on our platform, by tweaking our
device-tree until it booted without crashing. In the end I was able to load
all the modules and run the OpenGL-ES demo programs.
I can't believe this is the intended way of doing this, so I'd like to know if
there is someone else who has managed to get the MBX running OpenGL-ES on a
custom board with a custom build of the kernel.
Note: the kernel version number is still the same: 2.6.24.6, only difference
AFAIK is some minor unrelated patches to drivers for other MPC5121 SoC
devices, and probably some different configuration options. Apparently this
is enough to break binary compatibility for the drivers :-(
Any hint is appreciated...
Best regards,
--
David Jander
Protonic Holland.
^ permalink raw reply
* Re: MPC5121e, MBX driver, pvr.ko ...
From: Klaus Pedersen @ 2009-02-06 9:03 UTC (permalink / raw)
To: David Jander
Cc: Linuxppc-dev, linuxppc-dev-bounces+kau=bang-olufsen.dk,
John Rigby
In-Reply-To: <200902060824.06851.david.jander@protonic.nl>
[-- Attachment #1: Type: text/plain, Size: 2444 bytes --]
Hi David
I'm also run on a custom board, and using the MBX.
You need to get the device tree file right. You will see the MBX reserved
the irq 66 in the boot printout.
Instead of using insmod use modprobe. The are 2 versions of rc.pvr.
Best Regard
Klaus Pedersen
I a early thread about memcpy for G2/G3 cores, you mentioned that you will
have a look at the init. of the dram controller and the prio-manager, did
that give you anything??
David Jander <david.jander@protonic.nl>
Sent by: linuxppc-dev-bounces+kau=bang-olufsen.dk@ozlabs.org
06-02-2009 08:53
To
"Linuxppc-dev" <Linuxppc-dev@ozlabs.org>
cc
John Rigby <jrigby@freescale.com>
Subject
MPC5121e, MBX driver, pvr.ko ...
Hi all,
I have a custom board with a MPC5121e (rev 1.5) on it. It is the latest
git
kernel from denx ads5121 head with our BSP mixed in.
I decided to try out Application Note AN3793 from Freescale (3D Graphics
on
the ADS512101 Board Using OpenGL ES).
I started trying to load the provided (binary!) kernel modules into our
kernel, but I am geeting errors inserting the modules using
insmod: 'clcdc.ko' complains about not being able to register de device
major
number, and 'dbgdrv.ko' oopses with a BUG() in percpu_modfree()! This
function should never be called in a non-SMP kernel, so I suspect there
are
some important differences between the kernel I have and the one the
binary-only drivers where built against :-(
In another approach I managed to load the provided kernel binary (which is
built for the ADS512101 evaluation board) on our platform, by tweaking our
device-tree until it booted without crashing. In the end I was able to
load
all the modules and run the OpenGL-ES demo programs.
I can't believe this is the intended way of doing this, so I'd like to
know if
there is someone else who has managed to get the MBX running OpenGL-ES on
a
custom board with a custom build of the kernel.
Note: the kernel version number is still the same: 2.6.24.6, only
difference
AFAIK is some minor unrelated patches to drivers for other MPC5121 SoC
devices, and probably some different configuration options. Apparently
this
is enough to break binary compatibility for the drivers :-(
Any hint is appreciated...
Best regards,
--
David Jander
Protonic Holland.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
[-- Attachment #2: Type: text/html, Size: 3740 bytes --]
^ permalink raw reply
* Re: MPC5200 PCI Issues
From: Tobias Knutsson @ 2009-02-06 11:46 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <9C65C95E-12F1-4098-8EB4-298E49F7DA24@gmail.com>
Ok, I have had a breakthrough. I was trying to find out where the
resources were supposed to be allocated and that was when i found this
section of code in pbus_assign_resources_sorted() in
drivers/pci/setup-bus.c:
/* Don't touch classless devices or host bridges or ioapics. */
if (class =3D=3D PCI_CLASS_NOT_DEFINED ||
class =3D=3D PCI_CLASS_BRIDGE_HOST)
continue;
After that i took a quick look at the PCI-info reported by u-boot.
Sure enough, all boards were reported having class 0. At first i tried
to write a different class type, but as i suspected, the register
seems to be read-only. Therefore I simply commented out the first part
of the if-statement and now the resources seems to get allocated
properly.
However, I do realize that this is not the proper way of solving this
issue. Any ideas on how to fix it without modifying any kernel code?
On Thu, Feb 5, 2009 at 21:03, Tobias Knutsson <tobias.knutsson@gmail.com> w=
rote:
>
> Hi,
>
> That is exactly what the bootlog shows. Debug output on in both
> mpc52xx_pci.c and in pci-common.c. And the discussed code section enabled=
.
>
> H=E4lsningar / Regards
> Tobias Knutsson
>
> On 5 feb 2009, at 17.44, Grant Likely <grant.likely@secretlab.ca> wrote:
>
>> On Thu, Feb 5, 2009 at 12:06 AM, Tobias Knutsson
>> <tobias.knutsson@gmail.com> wrote:
>>>
>>> When enabling the debug-printouts, it came to me that I forgot to
>>> mention something kind of important. Using the standard mpc52xx_pci.c,
>>> even the memory resources are mapped to zero.
>>>
>>> After disabling this code block, the memory regions are mapped out
>>> fine (but still no IO):
>>
>> Reenable this code, enable debug in arch/powerpc/kernel/pci-common.c,
>> and post the results.
>>
>> When this code is disabled then you're just getting the leftovers from
>> U-Boot's scan of the PCI bus. For MPC5200 support Linux does its own
>> scan and its own allocation of memory/IO address space and this code
>> is needed to make sure that happens.
>>
>> g.
>>
>>>
>>> static void
>>> mpc52xx_pci_fixup_resources(struct pci_dev *dev)
>>> {
>>> int i;
>>>
>>> pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
>>> dev->vendor, dev->device);
>>>
>>> /* We don't rely on boot loader for PCI and resets all
>>> devices */
>>> for (i =3D 0; i < DEVICE_COUNT_RESOURCE; i++) {
>>> struct resource *res =3D &dev->resource[i];
>>> if (res->end > res->start) { /* Only valid resources */
>>> res->end -=3D res->start;
>>> res->start =3D 0;
>>> res->flags |=3D IORESOURCE_UNSET;
>>> }
>>> }
>>>
>>> What is the purpose of this code? Since all resources are reset here,
>>> where are they inteded to be re-allocated?
>>>
>>> Here is the bootlog with the aforementioned code enabled:
>>>
>>>
>>> reading cuImage.lite5200b
>>>
>>> 1833699 bytes read
>>> ## Booting kernel from Legacy Image at 00201400 ...
>>> Image Name: Linux-2.6.28
>>> Created: 2009-02-05 6:54:20 UTC
>>> Image Type: PowerPC Linux Kernel Image (gzip compressed)
>>> Data Size: 1833635 Bytes =3D 1.7 MB
>>> Load Address: 00400000
>>> Entry Point: 004005a0
>>> Verifying Checksum ... OK
>>> Uncompressing Kernel Image ... OK
>>> [ 0.000000] Using lite5200 machine description
>>> [ 0.000000] Linux version 2.6.28 (tknutsson@ztn-ubuntu) (gcc
>>> version 4.3.2 (Sourcery G++ Lite 4.3-50) ) #66 Thu Feb 5 07:51:46 CET
>>> 2009
>>> [ 0.000000] Adding MPC52xx PCI host bridge /pci@f0000d00
>>> [ 0.000000] PCI host bridge /pci@f0000d00 (primary) ranges:
>>> [ 0.000000] MEM 0x0000000050000000..0x000000005fffffff ->
>>> 0x0000000050000000
>>> [ 0.000000] IO 0x0000000060000000..0x0000000060ffffff ->
>>> 0x0000000000000000
>>> [ 0.000000] mpc52xx_pci_setup(hose=3Dc03ec000, pci_regs=3Dfdffad00)
>>> [ 0.000000] mem_resource[0] =3D {.start=3D50000000, .end=3D5fffffff,
>>> .flags=3D200}
>>> [ 0.000000] .io_resource=3D{.start=3D0,.end=3Dffffff,.flags=3D100}
>>> .io_base_phys=3D0x60000000
>>> [ 0.000000] Zone PFN ranges:
>>> [ 0.000000] DMA 0x00000000 -> 0x00004000
>>> [ 0.000000] Normal 0x00004000 -> 0x00004000
>>> [ 0.000000] Movable zone start PFN for each node
>>> [ 0.000000] early_node_map[1] active PFN ranges
>>> [ 0.000000] 0: 0x00000000 -> 0x00004000
>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>>> Total pages: 16256
>>> [ 0.000000] Kernel command line: console=3DttyPSC0,115200 root=3D/de=
v/sda2
>>> rw
>>> [ 0.000000] MPC52xx PIC is up and running!
>>> [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
>>> [ 0.000000] clocksource: timebase mult[7d00000] shift[22] registered
>>> [ 0.000263] console [ttyPSC0] enabled
>>> [ 0.121690] Dentry cache hash table entries: 8192 (order: 3, 32768
>>> bytes)
>>> [ 0.129012] Inode-cache hash table entries: 4096 (order: 2, 16384
>>> bytes)
>>> [ 0.147433] Memory: 60844k/65536k available (3704k kernel code,
>>> 4624k reserved, 156k data, 117k bss, 180k init)
>>> [ 0.157672] SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-3, MinObjec=
ts=3D0,
>>> CPUs=3D1, Nodes=3D1
>>> [ 0.165373] Calibrating delay loop... 63.87 BogoMIPS (lpj=3D127744)
>>> [ 0.236265] Mount-cache hash table entries: 512
>>> [ 0.245719] net_namespace: 288 bytes
>>> [ 0.250237] NET: Registered protocol family 16
>>> [ 0.284887] PCI: Probing PCI hardware
>>> [ 0.289670] mpc52xx_pci_fixup_resources() 1057:5809
>>> [ 0.294799] PCI:0000:00:17.0 Resource 0
>>> 0000000050400000-00000000507fffff [21208] fixup...
>>> [ 0.303180] PCI:0000:00:17.0
>>> 0000000050400000-00000000507fffff
>>> [ 0.309998] PCI:0000:00:17.0 Resource 1
>>> 0000000050800000-0000000050ffffff [20200] fixup...
>>> [ 0.318262] PCI:0000:00:17.0
>>> 0000000050800000-0000000050ffffff
>>> [ 0.325062] PCI:0000:00:17.0 Resource 2
>>> 0000000060000000-000000006000000f [20101] fixup...
>>> [ 0.333326] PCI:0000:00:17.0
>>> 0000000060000000-000000006000000f
>>> [ 0.340124] mpc52xx_pci_fixup_resources() 104c:9065
>>> [ 0.345242] PCI:0000:00:18.0 Resource 0
>>> 0000000051000000-00000000513fffff [21208] fixup...
>>> [ 0.353519] PCI:0000:00:18.0
>>> 0000000051000000-00000000513fffff
>>> [ 0.360319] PCI:0000:00:18.0 Resource 1
>>> 0000000051800000-0000000051ffffff [20200] fixup...
>>> [ 0.368583] PCI:0000:00:18.0
>>> 0000000051800000-0000000051ffffff
>>> [ 0.375383] PCI:0000:00:18.0 Resource 2
>>> 0000000060000010-000000006000001f [20101] fixup...
>>> [ 0.383647] PCI:0000:00:18.0
>>> 0000000060000010-000000006000001f
>>> [ 0.390444] mpc52xx_pci_fixup_resources() 104c:9065
>>> [ 0.395549] PCI:0000:00:19.0 Resource 0
>>> 0000000052000000-00000000523fffff [21208] fixup...
>>> [ 0.403826] PCI:0000:00:19.0
>>> 0000000052000000-00000000523fffff
>>> [ 0.410626] PCI:0000:00:19.0 Resource 1
>>> 0000000052800000-0000000052ffffff [20200] fixup...
>>> [ 0.418889] PCI:0000:00:19.0
>>> 0000000052800000-0000000052ffffff
>>> [ 0.425690] PCI:0000:00:19.0 Resource 2
>>> 0000000060000020-000000006000002f [20101] fixup...
>>> [ 0.433954] PCI:0000:00:19.0
>>> 0000000060000020-000000006000002f
>>> [ 0.440751] mpc52xx_pci_fixup_resources() 104c:9065
>>> [ 0.445854] PCI:0000:00:1a.0 Resource 0
>>> 0000000053000000-00000000533fffff [21208] fixup...
>>> [ 0.454130] PCI:0000:00:1a.0
>>> 0000000053000000-00000000533fffff
>>> [ 0.460930] PCI:0000:00:1a.0 Resource 1
>>> 0000000053800000-0000000053ffffff [20200] fixup...
>>> [ 0.469194] PCI:0000:00:1a.0
>>> 0000000053800000-0000000053ffffff
>>> [ 0.475994] PCI:0000:00:1a.0 Resource 2
>>> 0000000060000030-000000006000003f [20101] fixup...
>>> [ 0.484258] PCI:0000:00:1a.0
>>> 0000000060000030-000000006000003f
>>> [ 0.491056] mpc52xx_pci_fixup_resources() 104c:9065
>>> [ 0.495999] PCI: Fixup bus 0 (PHB)
>>> [ 0.499383] PCI: device 0000:00:16.0 OF node: <none>
>>> [ 0.504371] PCI: device 0000:00:17.0 OF node: <none>
>>> [ 0.509363] PCI: device 0000:00:18.0 OF node: <none>
>>> [ 0.514354] PCI: device 0000:00:19.0 OF node: <none>
>>> [ 0.519345] PCI: device 0000:00:1a.0 OF node: <none>
>>> [ 0.524332] Try to map irq for 0000:00:16.0...
>>> [ 0.528808] Try to map irq for 0000:00:17.0...
>>> [ 0.533334] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>> /soc5200@f0000000/interrupt-controller@500
>>> [ 0.543389] -> mapped to linux irq 65
>>> [ 0.547117] Try to map irq for 0000:00:18.0...
>>> [ 0.551626] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>> /soc5200@f0000000/interrupt-controller@500
>>> [ 0.561629] -> mapped to linux irq 65
>>> [ 0.565353] Try to map irq for 0000:00:19.0...
>>> [ 0.569858] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>> /soc5200@f0000000/interrupt-controller@500
>>> [ 0.579863] -> mapped to linux irq 65
>>> [ 0.583587] Try to map irq for 0000:00:1a.0...
>>> [ 0.588099] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>> /soc5200@f0000000/interrupt-controller@500
>>> [ 0.598103] -> mapped to linux irq 65
>>> [ 0.605144] PCI: PHB (bus 0) bridge rsrc 0:
>>> 0000000000000000-0000000000ffffff [0x100], parent c03a1fdc (PCI IO)
>>> [ 0.615266] PCI: PHB (bus 0) bridge rsrc 1:
>>> 0000000050000000-000000005fffffff [0x200], parent c03a1fc0 (PCI mem)
>>> [ 0.625539] PCI: Assigning unassigned resouces...
>>> [ 0.630304] bus: 00 index 0 io port: [0x00-0xffffff]
>>> [ 0.635299] bus: 00 index 1 mmio: [0x50000000-0x5fffffff]
>>> [ 0.640909] DMA: MPC52xx BestComm driver
>>> [ 0.645214] DMA: MPC52xx BestComm engine @f0001200 ok !
>>> [ 0.678739] SCSI subsystem initialized
>>> [ 0.709498] NET: Registered protocol family 2
>>> [ 0.754980] IP route cache hash table entries: 1024 (order: 0, 4096
>>> bytes)
>>> [ 0.762429] TCP established hash table entries: 2048 (order: 2, 1638=
4
>>> bytes)
>>> [ 0.769716] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
>>> [ 0.776224] TCP: Hash tables configured (established 2048 bind 2048)
>>> [ 0.782604] TCP reno registered
>>> [ 0.795054] NET: Registered protocol family 1
>>> [ 0.846171] JFFS2 version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc.
>>> [ 0.855699] msgmni has been set to 118
>>> [ 0.861227] alg: No test for stdrng (krng)
>>> [ 0.865651] io scheduler noop registered
>>> [ 0.869658] io scheduler anticipatory registered (default)
>>> [ 0.875224] io scheduler deadline registered
>>> [ 0.879838] io scheduler cfq registered
>>> [ 1.442231] Generic RTC Driver v1.07
>>> [ 1.447145] Serial: MPC52xx PSC UART driver
>>> [ 1.451885] f0002200.serial: ttyPSC2 at MMIO 0xf0002200 (irq =3D 130=
)
>>> is a MPC52xx PSC
>>> [ 1.461497] f0002400.serial: ttyPSC3 at MMIO 0xf0002400 (irq =3D 131=
)
>>> is a MPC52xx PSC
>>> [ 1.471257] f0002600.serial: ttyPSC4 at MMIO 0xf0002600 (irq =3D 139=
)
>>> is a MPC52xx PSC
>>> [ 1.480866] f0002800.serial: ttyPSC5 at MMIO 0xf0002800 (irq =3D 140=
)
>>> is a MPC52xx PSC
>>> [ 1.490461] f0002c00.serial: ttyPSC0 at MMIO 0xf0002c00 (irq =3D 132=
)
>>> is a MPC52xx PSC
>>> [ 1.521689] brd: module loaded
>>> [ 1.535886] loop: module loaded
>>> [ 1.544328] mpc52xx MII bus: probed
>>> [ 1.550220] net eth0: Using PHY at MDIO address 0
>>> [ 1.556124] Driver 'sd' needs updating - please use bus_type methods
>>> [ 1.563224] ata: MPC52xx IDE/ATA libata driver
>>> [ 1.568729] scsi0 : mpc52xx_ata
>>> [ 1.573032] ata1: PATA max UDMA/33 ata_regs 0xf0003a00 irq 135
>>> [ 1.751224] ata1.00: ATA-0: TRANSCEND, 20070831, max UDMA/66
>>> [ 1.756948] ata1.00: 3915072 sectors, multi 0: LBA
>>> [ 1.775156] ata1.00: configured for UDMA/33
>>> [ 1.803154] ata1.00: configured for UDMA/33
>>> [ 1.807423] ata1: EH complete
>>> [ 1.811300] scsi 0:0:0:0: Direct-Access ATA TRANSCEND
>>> 2007 PQ: 0 ANSI: 5
>>> [ 1.821337] sd 0:0:0:0: [sda] 3915072 512-byte hardware sectors:
>>> (2.00 GB/1.86 GiB)
>>> [ 1.829333] sd 0:0:0:0: [sda] Write Protect is off
>>> [ 1.834879] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
>>> enabled, doesn't support DPO or FUA
>>> [ 1.844851] sd 0:0:0:0: [sda] 3915072 512-byte hardware sectors:
>>> (2.00 GB/1.86 GiB)
>>> [ 1.852841] sd 0:0:0:0: [sda] Write Protect is off
>>> [ 1.858259] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
>>> enabled, doesn't support DPO or FUA
>>> [ 1.867450] sda: sda1 sda2
>>> [ 1.881490] sd 0:0:0:0: [sda] Attached SCSI disk
>>> [ 1.890711] fc000000.flash: Found 1 x16 devices at 0x0 in 8-bit bank
>>> [ 1.897222] Amd/Fujitsu Extended Query Table at 0x0040
>>> [ 1.902529] fc000000.flash: CFI does not contain boot bank
>>> location. Assuming top.
>>> [ 1.910147] number of CFI chips: 1
>>> [ 1.913603] cfi_cmdset_0002: Disabling erase-suspend-program due to
>>> code brokenness.
>>> [ 1.922009] RedBoot partition parsing not available
>>> [ 1.926998] Creating 4 MTD partitions on "fc000000.flash":
>>> [ 1.932547] 0x00000000-0x00500000 : "u-boot"
>>> [ 1.940601] 0x00500000-0x01000000 : "kernel"
>>> [ 1.948071] 0x01000000-0x02000000 : "rootfs"
>>> [ 1.955601] 0x02000000-0x03000000 : "application"
>>> [ 1.964240] i2c /dev entries driver
>>> [ 1.975775] Advanced Linux Sound Architecture Driver Version
>>> 1.0.18rc3.
>>> [ 1.983814] ASoC version 0.13.2
>>> [ 1.987668] tlv320aic23 0-001a: probing tlv320aic23 i2c device
>>> [ 2.040451] registering ASoC codec driver:
>>> /soc5200@f0000000/i2c@3d00/codec@1a
>>> [ 2.049539] ALSA device list:
>>> [ 2.052591] No soundcards found.
>>> [ 2.057430] TCP cubic registered
>>> [ 2.060765] NET: Registered protocol family 17
>>> [ 2.066886] RPC: Registered udp transport module.
>>> [ 2.071683] RPC: Registered tcp transport module.
>>> [ 2.087086] EXT2-fs warning: mounting unchecked fs, running e2fsck
>>> is recommended
>>> [ 2.094828] VFS: Mounted root (ext2 filesystem).
>>> [ 2.099690] Freeing unused kernel memory: 180k init
>>>
>>> On Wed, Feb 4, 2009 at 18:54, Grant Likely <grant.likely@secretlab.ca>
>>> wrote:
>>>>
>>>> On Wed, Feb 4, 2009 at 9:53 AM, Tobias Knutsson
>>>> <tobias.knutsson@gmail.com> wrote:
>>>>>
>>>>> clock-frequency =3D <0x1e84800>; //<0>; // From boot loa=
der
>>>>> interrupts =3D <2 8 0 2 9 0 2 10 0>;
>>>>> interrupt-parent =3D <&mpc5200_pic>;
>>>>> bus-range =3D <0 0>;
>>>>> ranges =3D <0x02000000 0 0x50000000 0x50000000 0 0x100000=
00
>>>>> 0x01000000 0 0x00000000 0x60000000 0 0x01000000=
>;
>>>>> };
>>>>>
>>>>> The cards' memory regions are mapped out fine to different addresses
>>>>> in the 0x50000000-0x60000000 range. However, the IO regions are all
>>>>> mapped
>>>>> to zero.
>>>>>
>>>>> Do you have any idea on what could be wrong or in which direction I
>>>>> should be looking?
>>>>
>>>> Hmmm. Your ranges property looks okay to me. The MPC5200 setup code
>>>> may be doing the wrong thing. Turn on debug at the top of
>>>> arch/powerpc/platforms/mpc52xx/mpc52xx_pci.c and post your kernel
>>>> output.
>>>>
>>>> g.
>>>>
>>>> --
>>>> Grant Likely, B.Sc., P.Eng.
>>>> Secret Lab Technologies Ltd.
>>>>
>>>
>>>
>>>
>>> --
>>>
>>> H=E4lsningar/Regards
>>> Tobias Knutsson
>>>
>>
>>
>>
>> --
>> Grant Likely, B.Sc., P.Eng.
>> Secret Lab Technologies Ltd.
>
--=20
H=E4lsningar/Regards
Tobias Knutsson
^ permalink raw reply
* [PATCH] Don't emulate mr. instructions
From: Ananth N Mavinakayanahalli @ 2009-02-06 12:02 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Paul Mackerras
Currently emulate_step() emulates mr. instructions without updating cr0
and this can be disastrous. Don't emulate mr.
This bug has been around for a while, but I am not sure if its a worthy
-stable candidate. I'll leave it to Ben do decide.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
---
arch/powerpc/lib/sstep.c | 2 ++
1 file changed, 2 insertions(+)
Index: linux-2.6.29-rc3/arch/powerpc/lib/sstep.c
===================================================================
--- linux-2.6.29-rc3.orig/arch/powerpc/lib/sstep.c
+++ linux-2.6.29-rc3/arch/powerpc/lib/sstep.c
@@ -172,6 +172,8 @@ int __kprobes emulate_step(struct pt_reg
}
break;
case 0x378: /* orx */
+ if (instr & 1)
+ break;
rs = (instr >> 21) & 0x1f;
rb = (instr >> 11) & 0x1f;
if (rs == rb) { /* mr */
^ permalink raw reply
* Re: MPC5200 PCI Issues
From: Tobias Knutsson @ 2009-02-06 12:39 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <ccb913ac0902060346s1aa4abbarae63145da4508c10@mail.gmail.com>
I have now found drivers/pci/quirks.c which seems to be the place for
these types of things. However, since this code is unlikely to ever
make it to mainline, is it possible to register a fixup hook in a
platform setup file (lite5200.c and friends)?
On Fri, Feb 6, 2009 at 12:46, Tobias Knutsson <tobias.knutsson@gmail.com> w=
rote:
> Ok, I have had a breakthrough. I was trying to find out where the
> resources were supposed to be allocated and that was when i found this
> section of code in pbus_assign_resources_sorted() in
> drivers/pci/setup-bus.c:
>
> /* Don't touch classless devices or host bridges or ioapic=
s. */
> if (class =3D=3D PCI_CLASS_NOT_DEFINED ||
> class =3D=3D PCI_CLASS_BRIDGE_HOST)
> continue;
>
> After that i took a quick look at the PCI-info reported by u-boot.
> Sure enough, all boards were reported having class 0. At first i tried
> to write a different class type, but as i suspected, the register
> seems to be read-only. Therefore I simply commented out the first part
> of the if-statement and now the resources seems to get allocated
> properly.
>
> However, I do realize that this is not the proper way of solving this
> issue. Any ideas on how to fix it without modifying any kernel code?
>
>
> On Thu, Feb 5, 2009 at 21:03, Tobias Knutsson <tobias.knutsson@gmail.com>=
wrote:
>>
>> Hi,
>>
>> That is exactly what the bootlog shows. Debug output on in both
>> mpc52xx_pci.c and in pci-common.c. And the discussed code section enable=
d.
>>
>> H=E4lsningar / Regards
>> Tobias Knutsson
>>
>> On 5 feb 2009, at 17.44, Grant Likely <grant.likely@secretlab.ca> wrote:
>>
>>> On Thu, Feb 5, 2009 at 12:06 AM, Tobias Knutsson
>>> <tobias.knutsson@gmail.com> wrote:
>>>>
>>>> When enabling the debug-printouts, it came to me that I forgot to
>>>> mention something kind of important. Using the standard mpc52xx_pci.c,
>>>> even the memory resources are mapped to zero.
>>>>
>>>> After disabling this code block, the memory regions are mapped out
>>>> fine (but still no IO):
>>>
>>> Reenable this code, enable debug in arch/powerpc/kernel/pci-common.c,
>>> and post the results.
>>>
>>> When this code is disabled then you're just getting the leftovers from
>>> U-Boot's scan of the PCI bus. For MPC5200 support Linux does its own
>>> scan and its own allocation of memory/IO address space and this code
>>> is needed to make sure that happens.
>>>
>>> g.
>>>
>>>>
>>>> static void
>>>> mpc52xx_pci_fixup_resources(struct pci_dev *dev)
>>>> {
>>>> int i;
>>>>
>>>> pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
>>>> dev->vendor, dev->device);
>>>>
>>>> /* We don't rely on boot loader for PCI and resets all
>>>> devices */
>>>> for (i =3D 0; i < DEVICE_COUNT_RESOURCE; i++) {
>>>> struct resource *res =3D &dev->resource[i];
>>>> if (res->end > res->start) { /* Only valid resources *=
/
>>>> res->end -=3D res->start;
>>>> res->start =3D 0;
>>>> res->flags |=3D IORESOURCE_UNSET;
>>>> }
>>>> }
>>>>
>>>> What is the purpose of this code? Since all resources are reset here,
>>>> where are they inteded to be re-allocated?
>>>>
>>>> Here is the bootlog with the aforementioned code enabled:
>>>>
>>>>
>>>> reading cuImage.lite5200b
>>>>
>>>> 1833699 bytes read
>>>> ## Booting kernel from Legacy Image at 00201400 ...
>>>> Image Name: Linux-2.6.28
>>>> Created: 2009-02-05 6:54:20 UTC
>>>> Image Type: PowerPC Linux Kernel Image (gzip compressed)
>>>> Data Size: 1833635 Bytes =3D 1.7 MB
>>>> Load Address: 00400000
>>>> Entry Point: 004005a0
>>>> Verifying Checksum ... OK
>>>> Uncompressing Kernel Image ... OK
>>>> [ 0.000000] Using lite5200 machine description
>>>> [ 0.000000] Linux version 2.6.28 (tknutsson@ztn-ubuntu) (gcc
>>>> version 4.3.2 (Sourcery G++ Lite 4.3-50) ) #66 Thu Feb 5 07:51:46 CET
>>>> 2009
>>>> [ 0.000000] Adding MPC52xx PCI host bridge /pci@f0000d00
>>>> [ 0.000000] PCI host bridge /pci@f0000d00 (primary) ranges:
>>>> [ 0.000000] MEM 0x0000000050000000..0x000000005fffffff ->
>>>> 0x0000000050000000
>>>> [ 0.000000] IO 0x0000000060000000..0x0000000060ffffff ->
>>>> 0x0000000000000000
>>>> [ 0.000000] mpc52xx_pci_setup(hose=3Dc03ec000, pci_regs=3Dfdffad00)
>>>> [ 0.000000] mem_resource[0] =3D {.start=3D50000000, .end=3D5fffffff=
,
>>>> .flags=3D200}
>>>> [ 0.000000] .io_resource=3D{.start=3D0,.end=3Dffffff,.flags=3D100}
>>>> .io_base_phys=3D0x60000000
>>>> [ 0.000000] Zone PFN ranges:
>>>> [ 0.000000] DMA 0x00000000 -> 0x00004000
>>>> [ 0.000000] Normal 0x00004000 -> 0x00004000
>>>> [ 0.000000] Movable zone start PFN for each node
>>>> [ 0.000000] early_node_map[1] active PFN ranges
>>>> [ 0.000000] 0: 0x00000000 -> 0x00004000
>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>>>> Total pages: 16256
>>>> [ 0.000000] Kernel command line: console=3DttyPSC0,115200 root=3D/d=
ev/sda2
>>>> rw
>>>> [ 0.000000] MPC52xx PIC is up and running!
>>>> [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
>>>> [ 0.000000] clocksource: timebase mult[7d00000] shift[22] registere=
d
>>>> [ 0.000263] console [ttyPSC0] enabled
>>>> [ 0.121690] Dentry cache hash table entries: 8192 (order: 3, 32768
>>>> bytes)
>>>> [ 0.129012] Inode-cache hash table entries: 4096 (order: 2, 16384
>>>> bytes)
>>>> [ 0.147433] Memory: 60844k/65536k available (3704k kernel code,
>>>> 4624k reserved, 156k data, 117k bss, 180k init)
>>>> [ 0.157672] SLUB: Genslabs=3D12, HWalign=3D32, Order=3D0-3, MinObje=
cts=3D0,
>>>> CPUs=3D1, Nodes=3D1
>>>> [ 0.165373] Calibrating delay loop... 63.87 BogoMIPS (lpj=3D127744)
>>>> [ 0.236265] Mount-cache hash table entries: 512
>>>> [ 0.245719] net_namespace: 288 bytes
>>>> [ 0.250237] NET: Registered protocol family 16
>>>> [ 0.284887] PCI: Probing PCI hardware
>>>> [ 0.289670] mpc52xx_pci_fixup_resources() 1057:5809
>>>> [ 0.294799] PCI:0000:00:17.0 Resource 0
>>>> 0000000050400000-00000000507fffff [21208] fixup...
>>>> [ 0.303180] PCI:0000:00:17.0
>>>> 0000000050400000-00000000507fffff
>>>> [ 0.309998] PCI:0000:00:17.0 Resource 1
>>>> 0000000050800000-0000000050ffffff [20200] fixup...
>>>> [ 0.318262] PCI:0000:00:17.0
>>>> 0000000050800000-0000000050ffffff
>>>> [ 0.325062] PCI:0000:00:17.0 Resource 2
>>>> 0000000060000000-000000006000000f [20101] fixup...
>>>> [ 0.333326] PCI:0000:00:17.0
>>>> 0000000060000000-000000006000000f
>>>> [ 0.340124] mpc52xx_pci_fixup_resources() 104c:9065
>>>> [ 0.345242] PCI:0000:00:18.0 Resource 0
>>>> 0000000051000000-00000000513fffff [21208] fixup...
>>>> [ 0.353519] PCI:0000:00:18.0
>>>> 0000000051000000-00000000513fffff
>>>> [ 0.360319] PCI:0000:00:18.0 Resource 1
>>>> 0000000051800000-0000000051ffffff [20200] fixup...
>>>> [ 0.368583] PCI:0000:00:18.0
>>>> 0000000051800000-0000000051ffffff
>>>> [ 0.375383] PCI:0000:00:18.0 Resource 2
>>>> 0000000060000010-000000006000001f [20101] fixup...
>>>> [ 0.383647] PCI:0000:00:18.0
>>>> 0000000060000010-000000006000001f
>>>> [ 0.390444] mpc52xx_pci_fixup_resources() 104c:9065
>>>> [ 0.395549] PCI:0000:00:19.0 Resource 0
>>>> 0000000052000000-00000000523fffff [21208] fixup...
>>>> [ 0.403826] PCI:0000:00:19.0
>>>> 0000000052000000-00000000523fffff
>>>> [ 0.410626] PCI:0000:00:19.0 Resource 1
>>>> 0000000052800000-0000000052ffffff [20200] fixup...
>>>> [ 0.418889] PCI:0000:00:19.0
>>>> 0000000052800000-0000000052ffffff
>>>> [ 0.425690] PCI:0000:00:19.0 Resource 2
>>>> 0000000060000020-000000006000002f [20101] fixup...
>>>> [ 0.433954] PCI:0000:00:19.0
>>>> 0000000060000020-000000006000002f
>>>> [ 0.440751] mpc52xx_pci_fixup_resources() 104c:9065
>>>> [ 0.445854] PCI:0000:00:1a.0 Resource 0
>>>> 0000000053000000-00000000533fffff [21208] fixup...
>>>> [ 0.454130] PCI:0000:00:1a.0
>>>> 0000000053000000-00000000533fffff
>>>> [ 0.460930] PCI:0000:00:1a.0 Resource 1
>>>> 0000000053800000-0000000053ffffff [20200] fixup...
>>>> [ 0.469194] PCI:0000:00:1a.0
>>>> 0000000053800000-0000000053ffffff
>>>> [ 0.475994] PCI:0000:00:1a.0 Resource 2
>>>> 0000000060000030-000000006000003f [20101] fixup...
>>>> [ 0.484258] PCI:0000:00:1a.0
>>>> 0000000060000030-000000006000003f
>>>> [ 0.491056] mpc52xx_pci_fixup_resources() 104c:9065
>>>> [ 0.495999] PCI: Fixup bus 0 (PHB)
>>>> [ 0.499383] PCI: device 0000:00:16.0 OF node: <none>
>>>> [ 0.504371] PCI: device 0000:00:17.0 OF node: <none>
>>>> [ 0.509363] PCI: device 0000:00:18.0 OF node: <none>
>>>> [ 0.514354] PCI: device 0000:00:19.0 OF node: <none>
>>>> [ 0.519345] PCI: device 0000:00:1a.0 OF node: <none>
>>>> [ 0.524332] Try to map irq for 0000:00:16.0...
>>>> [ 0.528808] Try to map irq for 0000:00:17.0...
>>>> [ 0.533334] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>>> /soc5200@f0000000/interrupt-controller@500
>>>> [ 0.543389] -> mapped to linux irq 65
>>>> [ 0.547117] Try to map irq for 0000:00:18.0...
>>>> [ 0.551626] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>>> /soc5200@f0000000/interrupt-controller@500
>>>> [ 0.561629] -> mapped to linux irq 65
>>>> [ 0.565353] Try to map irq for 0000:00:19.0...
>>>> [ 0.569858] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>>> /soc5200@f0000000/interrupt-controller@500
>>>> [ 0.579863] -> mapped to linux irq 65
>>>> [ 0.583587] Try to map irq for 0000:00:1a.0...
>>>> [ 0.588099] -> got one, spec 3 cells (0x00000001 0x00000001...) on
>>>> /soc5200@f0000000/interrupt-controller@500
>>>> [ 0.598103] -> mapped to linux irq 65
>>>> [ 0.605144] PCI: PHB (bus 0) bridge rsrc 0:
>>>> 0000000000000000-0000000000ffffff [0x100], parent c03a1fdc (PCI IO)
>>>> [ 0.615266] PCI: PHB (bus 0) bridge rsrc 1:
>>>> 0000000050000000-000000005fffffff [0x200], parent c03a1fc0 (PCI mem)
>>>> [ 0.625539] PCI: Assigning unassigned resouces...
>>>> [ 0.630304] bus: 00 index 0 io port: [0x00-0xffffff]
>>>> [ 0.635299] bus: 00 index 1 mmio: [0x50000000-0x5fffffff]
>>>> [ 0.640909] DMA: MPC52xx BestComm driver
>>>> [ 0.645214] DMA: MPC52xx BestComm engine @f0001200 ok !
>>>> [ 0.678739] SCSI subsystem initialized
>>>> [ 0.709498] NET: Registered protocol family 2
>>>> [ 0.754980] IP route cache hash table entries: 1024 (order: 0, 4096
>>>> bytes)
>>>> [ 0.762429] TCP established hash table entries: 2048 (order: 2, 163=
84
>>>> bytes)
>>>> [ 0.769716] TCP bind hash table entries: 2048 (order: 1, 8192 bytes=
)
>>>> [ 0.776224] TCP: Hash tables configured (established 2048 bind 2048=
)
>>>> [ 0.782604] TCP reno registered
>>>> [ 0.795054] NET: Registered protocol family 1
>>>> [ 0.846171] JFFS2 version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc.
>>>> [ 0.855699] msgmni has been set to 118
>>>> [ 0.861227] alg: No test for stdrng (krng)
>>>> [ 0.865651] io scheduler noop registered
>>>> [ 0.869658] io scheduler anticipatory registered (default)
>>>> [ 0.875224] io scheduler deadline registered
>>>> [ 0.879838] io scheduler cfq registered
>>>> [ 1.442231] Generic RTC Driver v1.07
>>>> [ 1.447145] Serial: MPC52xx PSC UART driver
>>>> [ 1.451885] f0002200.serial: ttyPSC2 at MMIO 0xf0002200 (irq =3D 13=
0)
>>>> is a MPC52xx PSC
>>>> [ 1.461497] f0002400.serial: ttyPSC3 at MMIO 0xf0002400 (irq =3D 13=
1)
>>>> is a MPC52xx PSC
>>>> [ 1.471257] f0002600.serial: ttyPSC4 at MMIO 0xf0002600 (irq =3D 13=
9)
>>>> is a MPC52xx PSC
>>>> [ 1.480866] f0002800.serial: ttyPSC5 at MMIO 0xf0002800 (irq =3D 14=
0)
>>>> is a MPC52xx PSC
>>>> [ 1.490461] f0002c00.serial: ttyPSC0 at MMIO 0xf0002c00 (irq =3D 13=
2)
>>>> is a MPC52xx PSC
>>>> [ 1.521689] brd: module loaded
>>>> [ 1.535886] loop: module loaded
>>>> [ 1.544328] mpc52xx MII bus: probed
>>>> [ 1.550220] net eth0: Using PHY at MDIO address 0
>>>> [ 1.556124] Driver 'sd' needs updating - please use bus_type method=
s
>>>> [ 1.563224] ata: MPC52xx IDE/ATA libata driver
>>>> [ 1.568729] scsi0 : mpc52xx_ata
>>>> [ 1.573032] ata1: PATA max UDMA/33 ata_regs 0xf0003a00 irq 135
>>>> [ 1.751224] ata1.00: ATA-0: TRANSCEND, 20070831, max UDMA/66
>>>> [ 1.756948] ata1.00: 3915072 sectors, multi 0: LBA
>>>> [ 1.775156] ata1.00: configured for UDMA/33
>>>> [ 1.803154] ata1.00: configured for UDMA/33
>>>> [ 1.807423] ata1: EH complete
>>>> [ 1.811300] scsi 0:0:0:0: Direct-Access ATA TRANSCEND
>>>> 2007 PQ: 0 ANSI: 5
>>>> [ 1.821337] sd 0:0:0:0: [sda] 3915072 512-byte hardware sectors:
>>>> (2.00 GB/1.86 GiB)
>>>> [ 1.829333] sd 0:0:0:0: [sda] Write Protect is off
>>>> [ 1.834879] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
>>>> enabled, doesn't support DPO or FUA
>>>> [ 1.844851] sd 0:0:0:0: [sda] 3915072 512-byte hardware sectors:
>>>> (2.00 GB/1.86 GiB)
>>>> [ 1.852841] sd 0:0:0:0: [sda] Write Protect is off
>>>> [ 1.858259] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
>>>> enabled, doesn't support DPO or FUA
>>>> [ 1.867450] sda: sda1 sda2
>>>> [ 1.881490] sd 0:0:0:0: [sda] Attached SCSI disk
>>>> [ 1.890711] fc000000.flash: Found 1 x16 devices at 0x0 in 8-bit ban=
k
>>>> [ 1.897222] Amd/Fujitsu Extended Query Table at 0x0040
>>>> [ 1.902529] fc000000.flash: CFI does not contain boot bank
>>>> location. Assuming top.
>>>> [ 1.910147] number of CFI chips: 1
>>>> [ 1.913603] cfi_cmdset_0002: Disabling erase-suspend-program due to
>>>> code brokenness.
>>>> [ 1.922009] RedBoot partition parsing not available
>>>> [ 1.926998] Creating 4 MTD partitions on "fc000000.flash":
>>>> [ 1.932547] 0x00000000-0x00500000 : "u-boot"
>>>> [ 1.940601] 0x00500000-0x01000000 : "kernel"
>>>> [ 1.948071] 0x01000000-0x02000000 : "rootfs"
>>>> [ 1.955601] 0x02000000-0x03000000 : "application"
>>>> [ 1.964240] i2c /dev entries driver
>>>> [ 1.975775] Advanced Linux Sound Architecture Driver Version
>>>> 1.0.18rc3.
>>>> [ 1.983814] ASoC version 0.13.2
>>>> [ 1.987668] tlv320aic23 0-001a: probing tlv320aic23 i2c device
>>>> [ 2.040451] registering ASoC codec driver:
>>>> /soc5200@f0000000/i2c@3d00/codec@1a
>>>> [ 2.049539] ALSA device list:
>>>> [ 2.052591] No soundcards found.
>>>> [ 2.057430] TCP cubic registered
>>>> [ 2.060765] NET: Registered protocol family 17
>>>> [ 2.066886] RPC: Registered udp transport module.
>>>> [ 2.071683] RPC: Registered tcp transport module.
>>>> [ 2.087086] EXT2-fs warning: mounting unchecked fs, running e2fsck
>>>> is recommended
>>>> [ 2.094828] VFS: Mounted root (ext2 filesystem).
>>>> [ 2.099690] Freeing unused kernel memory: 180k init
>>>>
>>>> On Wed, Feb 4, 2009 at 18:54, Grant Likely <grant.likely@secretlab.ca>
>>>> wrote:
>>>>>
>>>>> On Wed, Feb 4, 2009 at 9:53 AM, Tobias Knutsson
>>>>> <tobias.knutsson@gmail.com> wrote:
>>>>>>
>>>>>> clock-frequency =3D <0x1e84800>; //<0>; // From boot lo=
ader
>>>>>> interrupts =3D <2 8 0 2 9 0 2 10 0>;
>>>>>> interrupt-parent =3D <&mpc5200_pic>;
>>>>>> bus-range =3D <0 0>;
>>>>>> ranges =3D <0x02000000 0 0x50000000 0x50000000 0 0x10000=
000
>>>>>> 0x01000000 0 0x00000000 0x60000000 0 0x0100000=
0>;
>>>>>> };
>>>>>>
>>>>>> The cards' memory regions are mapped out fine to different addresses
>>>>>> in the 0x50000000-0x60000000 range. However, the IO regions are all
>>>>>> mapped
>>>>>> to zero.
>>>>>>
>>>>>> Do you have any idea on what could be wrong or in which direction I
>>>>>> should be looking?
>>>>>
>>>>> Hmmm. Your ranges property looks okay to me. The MPC5200 setup code
>>>>> may be doing the wrong thing. Turn on debug at the top of
>>>>> arch/powerpc/platforms/mpc52xx/mpc52xx_pci.c and post your kernel
>>>>> output.
>>>>>
>>>>> g.
>>>>>
>>>>> --
>>>>> Grant Likely, B.Sc., P.Eng.
>>>>> Secret Lab Technologies Ltd.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> H=E4lsningar/Regards
>>>> Tobias Knutsson
>>>>
>>>
>>>
>>>
>>> --
>>> Grant Likely, B.Sc., P.Eng.
>>> Secret Lab Technologies Ltd.
>>
>
>
>
> --
>
> H=E4lsningar/Regards
> Tobias Knutsson
>
--=20
H=E4lsningar/Regards
Tobias Knutsson
^ permalink raw reply
* Re: MPC5200 PCI Issues
From: Andre Schwarz @ 2009-02-06 13:34 UTC (permalink / raw)
To: Tobias Knutsson; +Cc: linuxppc-dev
In-Reply-To: <ccb913ac0902040853o395a7f25x855b477453c76c33@mail.gmail.com>
Tobias,
are you starting with 2.6.28 or are you upgrading ?
My system runs very fine with 2.6.27 ....
Tobias Knutsson wrote:
> I am currently trying to get an MPC5200-based board to run Linux
> 2.6.28. Most of the devices are working, however i have some issues
> with the PCI-bus. More precisely, the issue is that all of
> the cards' IO-regions are mapped to address 0x0.
>
> In my device tree I have the following:
>
> pci@f0000d00 {
> #interrupt-cells = <1>;
> #size-cells = <2>;
> #address-cells = <3>;
> device_type = "pci";
> compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> reg = <0xf0000d00 0x100>;
> interrupt-map-mask = <0xf800 0 0 7>;
> interrupt-map = <0xb000 0 0 1 &mpc5200_pic 0 0 3 // MPC5200
> 0xb000 0 0 2 &mpc5200_pic 0 0 3
> 0xb000 0 0 3 &mpc5200_pic 0 0 3
> 0xb000 0 0 4 &mpc5200_pic 0 0 3
>
What's this ? Is the MPC5200 interrupting itself ?
> 0xb800 0 0 1 &mpc5200_pic 1 1 3 // c64x0
> 0xb800 0 0 2 &mpc5200_pic 1 1 3
> 0xb800 0 0 3 &mpc5200_pic 1 1 3
> 0xb800 0 0 4 &mpc5200_pic 1 1 3
>
Have you connected 4 IRQ lines to each c64x device ?
> 0xc000 0 0 1 &mpc5200_pic 1 1 3 // c64x1
> 0xc000 0 0 2 &mpc5200_pic 1 1 3
> 0xc000 0 0 3 &mpc5200_pic 1 1 3
> 0xc000 0 0 4 &mpc5200_pic 1 1 3
>
> 0xc800 0 0 1 &mpc5200_pic 1 1 3 // c64x2
> 0xc800 0 0 2 &mpc5200_pic 1 1 3
> 0xc800 0 0 3 &mpc5200_pic 1 1 3
> 0xc800 0 0 4 &mpc5200_pic 1 1 3
>
> 0xd000 0 0 1 &mpc5200_pic 1 1 3 // c64x3
> 0xd000 0 0 2 &mpc5200_pic 1 1 3
> 0xd000 0 0 3 &mpc5200_pic 1 1 3
> 0xd000 0 0 4 &mpc5200_pic 1 1 3
>
> 0xd800 0 0 1 &mpc5200_pic 1 1 3 // c64x4
> 0xd800 0 0 2 &mpc5200_pic 1 1 3
> 0xd800 0 0 3 &mpc5200_pic 1 1 3
> 0xd800 0 0 4 &mpc5200_pic 1 1 3>;
>
>
I'm using an external FPGA and an e1000 NIC connectedt to IRQ2 and IRQ3 :
interrupt-map = <0x5800 0 0 1 &mpc5200_pic 1 2 3
0x5000 0 0 1
&mpc5200_pic 1 3 3>;
> clock-frequency = <0x1e84800>; //<0>; // From boot loader
> interrupts = <2 8 0 2 9 0 2 10 0>;
> interrupt-parent = <&mpc5200_pic>;
> bus-range = <0 0>;
> ranges = <0x02000000 0 0x50000000 0x50000000 0 0x10000000
> 0x01000000 0 0x00000000 0x60000000 0 0x01000000>;
> };
>
I'm using a 3 liner :
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
> The cards' memory regions are mapped out fine to different addresses
> in the 0x50000000-0x60000000 range. However, the IO regions are all mapped
> to zero.
>
>
Are you c64x devices responding properly ? Is IO access enabled in the
PCI command register ?
Are they announcing a reasonable window ? How man KBytes ?
> Do you have any idea on what could be wrong or in which direction I
> should be looking?
>
>
>
Hopefully something is useful to you.
regards,
Andre
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich
^ permalink raw reply
* [PATCH] i2c-mpc: do not allow interruptions when waiting for I2C to complete
From: Timur Tabi @ 2009-02-06 14:00 UTC (permalink / raw)
To: linuxppc-dev, linux-i2c, galak, broonie, mditto
The i2c_wait() function is using wait_event_interruptible_timeout() to wait for
the I2C controller to signal that it has completed an I2C bus operation. If
the process that causes the I2C operation terminated abruptly, the wait will
be interrupted, returning an error. It is better to let the I2C operation
finished before the process exits.
It is safe to use wait_event_timeout() instead, because the timeout will allow
the process to exit if the I2C bus hangs. It's also better to allow the
I2C operation to finish, because unacknowledged I2C operations can cause the
I2C bus to hang.
Signed-off-by: Timur Tabi <timur@freescale.com>
---
A similar change should probably be done to i2c-cpm.c, and maybe all other
I2C drivers. Not many use wait_event_interruptible_timeout().
drivers/i2c/busses/i2c-mpc.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fc..c0ace48 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -70,7 +70,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
/* Read again to allow register to stabilise */
i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
writeb(0, i2c->base + MPC_I2C_SR);
- wake_up_interruptible(&i2c->queue);
+ wake_up(&i2c->queue);
}
return IRQ_HANDLED;
}
@@ -115,13 +115,10 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
writeb(0, i2c->base + MPC_I2C_SR);
} else {
/* Interrupt mode */
- result = wait_event_interruptible_timeout(i2c->queue,
+ result = wait_event_timeout(i2c->queue,
(i2c->interrupt & CSR_MIF), timeout * HZ);
- if (unlikely(result < 0)) {
- pr_debug("I2C: wait interrupted\n");
- writeccr(i2c, 0);
- } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ if (unlikely(!(i2c->interrupt & CSR_MIF))) {
pr_debug("I2C: wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
--
1.5.5
^ permalink raw reply related
* Re: FSL eSDHC bindings update
From: Anton Vorontsov @ 2009-02-06 15:37 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
In-Reply-To: <A7909298-D656-4BDE-BB02-0D6A8036045D@kernel.crashing.org>
On Thu, Feb 05, 2009 at 08:52:56PM -0600, Kumar Gala wrote:
> On Feb 5, 2009, at 1:04 PM, Anton Vorontsov wrote:
>> On Thu, Jan 22, 2009 at 01:15:01PM -0600, Kumar Gala wrote:
>>> On Jan 21, 2009, at 8:00 PM, Anton Vorontsov wrote:
>>>> This patch adds a new driver: sdhci-of. The driver is similar to
>>>> the sdhci-pci, it contains common probe code, and controller-
>>>> specific
>>>> ops and quirks.
>>>>
>>>> So far there are only Freescale eSDHC ops and quirks.
>>>>
>>>> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
>>>> ---
>>>> drivers/mmc/host/Kconfig | 10 ++
>>>> drivers/mmc/host/Makefile | 1 +
>>>> drivers/mmc/host/sdhci-of.c | 274 ++++++++++++++++++++++++++++++++
>>>> ++
>>>> +++++++++
>>>> 3 files changed, 285 insertions(+), 0 deletions(-)
>>>> create mode 100644 drivers/mmc/host/sdhci-of.c
>>>
>>> Still griping about lack of OF binding docs for this.
>>
>> Here they're.
>>
>> I'm assuming that MPC8536 is the first chip in 85xx family with eSDHC.
>
> thanks. MPC8536 is the first. Do we need a u-boot patch for clock-
> frequency on 85xx?
Yes, I'll prepare U-Boot patches soon (on top of Andy Fleming's
eSDHC work):
http://www.mail-archive.com/u-boot@lists.denx.de/msg04183.html
W/o the U-Boot patches SDHCI driver will just fail to probe
(gracefully, saying that the controller doesn't specify sdclk).
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: Build breakage for CONFIG_PM but no CONFIG_SUSPEND
From: Scott Wood @ 2009-02-06 16:04 UTC (permalink / raw)
To: Michael Neuling; +Cc: linuxppc-dev
In-Reply-To: <1436.1233879027@neuling.org>
On Fri, Feb 06, 2009 at 11:10:27AM +1100, Michael Neuling wrote:
> I noticed this doing some randconfig testing (.config below). I have
> CONFIG_PM but no CONFIG_SUSPEND. Bug is against mainline.
>
> arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
> ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
> make[1]: *** [.tmp_vmlinux1] Error 1
> make: *** [sub-make] Error 2
>
> Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
> CONFIG_SUSPEND. d49747bdfb2ddebea24d1580da55b79d093d48a9 introduced
> this.
>
> Maybe this fixes it?
>
>
> Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
ACK. That was a leftover from before CONFIG_SUSPEND was introduced.
-Scott
^ permalink raw reply
* Re: Build breakage for CONFIG_PM but no CONFIG_SUSPEND
From: Kumar Gala @ 2009-02-06 16:26 UTC (permalink / raw)
To: Michael Neuling; +Cc: Scott Wood, linuxppc-dev list
In-Reply-To: <20090206160452.GB1641@ld0162-tx32.am.freescale.net>
On Feb 6, 2009, at 10:04 AM, Scott Wood wrote:
> On Fri, Feb 06, 2009 at 11:10:27AM +1100, Michael Neuling wrote:
>> I noticed this doing some randconfig testing (.config below). I have
>> CONFIG_PM but no CONFIG_SUSPEND. Bug is against mainline.
>>
>> arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
>> ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
>> make[1]: *** [.tmp_vmlinux1] Error 1
>> make: *** [sub-make] Error 2
>>
>> Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
>> CONFIG_SUSPEND. d49747bdfb2ddebea24d1580da55b79d093d48a9 introduced
>> this.
>>
>> Maybe this fixes it?
>>
>>
>> Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
>
> ACK. That was a leftover from before CONFIG_SUSPEND was introduced.
If you send a proper patch I'll apply it and queue it up with some
other fixes.
- k
^ permalink raw reply
* Re: Build breakage for CONFIG_PM but no CONFIG_SUSPEND
From: Kumar Gala @ 2009-02-06 16:37 UTC (permalink / raw)
To: Michael Neuling; +Cc: Scott Wood, linuxppc-dev
In-Reply-To: <1436.1233879027@neuling.org>
On Feb 5, 2009, at 6:10 PM, Michael Neuling wrote:
> I noticed this doing some randconfig testing (.config below). I have
> CONFIG_PM but no CONFIG_SUSPEND. Bug is against mainline.
>
> arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
> ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
> make[1]: *** [.tmp_vmlinux1] Error 1
> make: *** [sub-make] Error 2
>
> Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
> CONFIG_SUSPEND. d49747bdfb2ddebea24d1580da55b79d093d48a9 introduced
> this.
>
> Maybe this fixes it?
>
>
> Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.
>
> Signed-off-by: Michael Neuling <mikey@neuling.org>
> ---
> arch/powerpc/sysdev/ipic.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
applied (ignore my noise from earlier)
- k
^ permalink raw reply
* Re: [PATCH 1/2] powerpc/83xx: Fix missing #{address, size}-cells in mpc8313erdb.dts
From: Kumar Gala @ 2009-02-06 16:39 UTC (permalink / raw)
To: Anton Vorontsov; +Cc: linuxppc-dev
In-Reply-To: <20090205201032.GA3425@oksana.dev.rtsoft.ru>
On Feb 5, 2009, at 2:10 PM, Anton Vorontsov wrote:
> commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert
> gianfar to an of_platform_driver") introduced a child node for
> the ethernet@25000 controller, but no address and size cells
> specifiers were added, and that makes dtc unhappy:
>
> DTC: dts->dtb on file "arch/powerpc/boot/dts/mpc8313erdb.dts"
> Warning (reg_format): "reg" property in /soc8313@e0000000/
> ethernet@25000/mdio@25520 has invalid length (8 bytes) (#address-
> cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells
> value for /soc8313@e0000000/ethernet@25000/mdio@25520
> Warning (avoid_default_addr_size): Relying on default #size-cells
> value for /soc8313@e0000000/ethernet@25000/mdio@25520
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8313erdb.dts | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
applied to merge
- k
^ permalink raw reply
* Re: [PATCH 2/2] powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
From: Kumar Gala @ 2009-02-06 16:39 UTC (permalink / raw)
To: Anton Vorontsov; +Cc: linuxppc-dev
In-Reply-To: <20090205201040.GB3425@oksana.dev.rtsoft.ru>
On Feb 5, 2009, at 2:10 PM, Anton Vorontsov wrote:
> TSEC0 is connected to Vitesse 7385 5-port switch. The switch
> isn't connected to any mdio bus, the link to the switch is fixed
> to Full-duplex 1000 Mb/s (no pause).
>
> This patch fixes following failure during bootup:
>
> mdio@24520:01 not found
> eth0: Could not attach to PHY
> IP-Config: Failed to open eth0
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8313erdb.dts | 9 ++-------
> arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 2 +-
> 2 files changed, 3 insertions(+), 8 deletions(-)
applied to merge
- k
^ permalink raw reply
* Re: [PATCH] arch/powerpc: Eliminate double sizeof
From: Kumar Gala @ 2009-02-06 16:44 UTC (permalink / raw)
To: Julia Lawall; +Cc: linuxppc-dev, kernel-janitors, linux-kernel
In-Reply-To: <Pine.LNX.4.64.0902042236200.3091@ask.diku.dk>
On Feb 4, 2009, at 3:43 PM, Julia Lawall wrote:
> From: Julia Lawall <julia@diku.dk>
>
> Taking sizeof the result of sizeof is quite strange and does not
> seem to be
> what is wanted here.
>
> This was fixed using the following semantic patch.
> (http://www.emn.fr/x-info/coccinelle/)
>
> // <smpl>
> @@
> expression E;
> @@
>
> - sizeof (
> sizeof (E)
> - )
>
> @@
> type T;
> @@
>
> - sizeof (
> sizeof (T)
> - )
> // </smpl>
>
> Signed-off-by: Julia Lawall <julia@diku.dk>
> ---
> arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
applied
- k
^ permalink raw reply
* Re: [PATCH] powerpc/cpm2 Fix set interrupt type
From: Kumar Gala @ 2009-02-06 16:44 UTC (permalink / raw)
To: paulfax; +Cc: linuxppc-dev
In-Reply-To: <497EC957.2050205@conspiracy.net>
On Jan 27, 2009, at 2:44 AM, paulfax wrote:
> This is a simple change to correct problems when using set_irq_type
> on platforms using CPM2.
> This code correct the problem on most platform but still fails on
> 8272 derived platforms for some interrupts.
> On 8272 PC2 & 3 are missing and PC 23 & 29 are added, which this
> patch does not address.
>
> Signed-off-by: Paul Bilke <paul at conspiracy.net>
> ---
>
>
>
>
> diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/
> cpm2_pic.c
> index b16ca3e..78f1f7c 100644
> --- a/arch/powerpc/sysdev/cpm2_pic.c
> +++ b/arch/powerpc/sysdev/cpm2_pic.c
> @@ -165,7 +165,7 @@ static int cpm2_set_irq_type(unsigned int virq,
> unsigned int flow_type)
> edibit = (14 - (src - CPM2_IRQ_EXT1));
> else
> if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0)
> - edibit = (31 - (src - CPM2_IRQ_PORTC15));
> + edibit = (31 - (CPM2_IRQ_PORTC0 - src));
> else
> return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 :
> -EINVAL;
applied
- k
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox