* Re: [PATCH] mpc5200: support for the MAN mpc5200 based board uc101
From: Heiko Schocher @ 2009-09-14 14:12 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40909140638r422db79aj7568f492163c5d96@mail.gmail.com>
Hello Grant,
Grant Likely wrote:
> Thanks for the patch. Comments below.
>
> g.
>
> On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
>> - serial Console on PSC1
>> - 64MB SDRAM
>> - MTD CFI Flash
>> - Ethernet FEC
>> - I2C with PCF8563 and Temp. Sensor ADM9240
>> - IDE support
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> ---
>> - based on:
>> git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
>>
>> - checked with:
>>
>> $ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
>> total: 0 errors, 0 warnings, 1622 lines checked
>>
>> 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
>> $
>>
>> arch/powerpc/boot/dts/uc101.dts | 312 ++++++
>> arch/powerpc/configs/52xx/uc101_defconfig | 1303 ++++++++++++++++++++++++++
>
> I generally don't like board specific defconfigs unless there is a
> really compelling reason why it should be in the kernel tree. Please
> add the stuff you need (as modules!) to mpc5200_defconfig.
OK, thanks for spotting this. I take a look how this works.
> g.
>
>> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
>> new file mode 100644
>> index 0000000..28e1c90
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/uc101.dts
>> @@ -0,0 +1,312 @@
>> +/*
>> + * uc101 board Device Tree Source
>> + *
>> + * Copyright (C) 2009 DENX Software Engineering GmbH
>> + * Heiko Schocher <hs@denx.de>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/ {
>> + model = "man,uc101";
>> + compatible = "man,uc101";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-parent = <&mpc5200_pic>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + PowerPC,5200@0 {
>> + device_type = "cpu";
>> + reg = <0>;
>> + d-cache-line-size = <32>;
>> + i-cache-line-size = <32>;
>> + d-cache-size = <0x4000>; // L1, 16K
>> + i-cache-size = <0x4000>; // L1, 16K
>> + timebase-frequency = <0>; // from bootloader
>> + bus-frequency = <0>; // from bootloader
>> + clock-frequency = <0>; // from bootloader
>> + };
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x00000000 0x04000000>; // 64MB
>> + };
>> +
>> + soc5200@f0000000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "fsl,mpc5200-immr";
>> + ranges = <0 0xf0000000 0x0000c000>;
>> + reg = <0xf0000000 0x00000100>;
>> + bus-frequency = <0>; // from bootloader
>> + system-frequency = <0>; // from bootloader
>> +
>> + cdm@200 {
>> + compatible = "fsl,mpc5200-cdm";
>> + reg = <0x200 0x38>;
>> + };
>> +
>> + mpc5200_pic: interrupt-controller@500 {
>> + // 5200 interrupts are encoded into two levels;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + compatible = "fsl,mpc5200-pic";
>> + reg = <0x500 0x80>;
>> + interrupts = <0 0 3>;
>> + };
>> +
>> + gpt1: timer@610 { // General Purpose Timer 1 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x610 0x10>;
>> + interrupts = <1 10 0>;
>> + gpio-controller;
>> + };
>> +
>> + gpt2: timer@620 { // General Purpose Timer 2 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x620 0x10>;
>> + interrupts = <1 11 0>;
>> + gpio-controller;
>> + };
>> +
>> + gpt3: timer@630 { // General Purpose Timer 3 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x630 0x10>;
>> + interrupts = <1 12 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + gpio_simple: gpio@b00 {
>> + compatible = "fsl,mpc5200-gpio";
>> + reg = <0xb00 0x40>;
>> + interrupts = <1 7 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + gpio_wkup: gpio@c00 {
>> + compatible = "fsl,mpc5200-gpio-wkup";
>> + reg = <0xc00 0x40>;
>> + interrupts = <1 8 0 0 3 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + dma-controller@1200 {
>> + device_type = "dma-controller";
>> + compatible = "fsl,mpc5200-bestcomm";
>> + reg = <0x1200 0x80>;
>> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
>> + 3 4 0 3 5 0 3 6 0 3 7 0
>> + 3 8 0 3 9 0 3 10 0 3 11 0
>> + 3 12 0 3 13 0 3 14 0 3 15 0>;
>> + };
>> +
>> + xlb@1f00 {
>> + compatible = "fsl,mpc5200-xlb";
>> + reg = <0x1f00 0x100>;
>> + };
>> +
>> + serial@2000 { // PSC1
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2000 0x100>;
>> + interrupts = <2 1 0>;
>> + };
>> +
>> + serial@2200 { // PSC2
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2200 0x100>;
>> + interrupts = <2 2 0>;
>> + };
>> +
>> + serial@2c00 { // PSC6
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2c00 0x100>;
>> + interrupts = <2 6 0>;
>> + };
>> +
>> + ethernet@3000 {
>> + compatible = "fsl,mpc5200-fec";
>> + reg = <0x3000 0x400>;
>> + local-mac-address = [ 00 00 00 00 00 00 ];
>> + interrupts = <2 5 0>;
>> + phy-handle = <&phy0>;
>> + };
>> +
>> + mdio@3000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,mpc5200-mdio";
>> + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
>> + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
>> +
>> + phy0: ethernet-phy@0 {
>> + reg = <0>;
>
> For completeness, you should have a compatible property for the PHY
> here in the form "<vendor>,<part number>"
Ok, fix this.
>> + };
>> + };
>> +
>> + ata@3a00 {
>> + compatible = "fsl,mpc5200-ata";
>> + reg = <0x3a00 0x100>;
>> + interrupts = <2 7 0>;
>> + };
>> +
>> + i2c@3d40 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,mpc5200-i2c","fsl-i2c";
>> + reg = <0x3d40 0x40>;
>> + interrupts = <2 16 0>;
>> + fsl5200-clocking;
>
> I believe fsl5200-clocking is no longer required. There is a patch
> pending which removes this property from the other .dts files.
Ok, fix this.
>> +
>> + hwmon@2c {
>> + compatible = "ad,adm9240";
>> + reg = <0x2c>;
>> + };
>> + rtc@51 {
>> + compatible = "rtc,pcf8563";
>> + reg = <0x51>;
>> + };
>> + };
>> +
>> + sram@8000 {
>> + compatible = "fsl,mpc5200-sram";
>> + reg = <0x8000 0x4000>;
>> + };
>> +
>> + };
>> +
>> + localbus {
>> + compatible = "fsl,mpc5200-lpb","simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0xff800000 0x00800000
>> + 1 0 0x80000000 0x00800000
>> + 3 0 0x80000000 0x00800000>;
>> +
>> + flash@0,0 {
>> + compatible = "cfi-flash";
>> + reg = <0 0 0x00800000>;
>> + bank-width = <2>;
>> + device-width = <2>;
>> + #size-cells = <1>;
>> + #address-cells = <1>;
>> + partition@0 {
>> + label = "DTS";
>> + reg = <0x0 0x00100000>;
>> + };
>> + partition@100000 {
>> + label = "Kernel";
>> + reg = <0x100000 0x00200000>;
>> + };
>> + partition@300000 {
>> + label = "RootFS";
>> + reg = <0x00300000 0x00200000>;
>> + };
>> +
>> + partition@500000 {
>> + label = "user";
>> + reg = <0x00500000 0x00200000>;
>> + };
>> + partition@700000 {
>> + label = "U-Boot";
>> + reg = <0x00700000 0x00040000>;
>> + };
>> + partition@740000 {
>> + label = "Env";
>> + reg = <0x00740000 0x00010000>;
>> + };
>> + partition@750000 {
>> + label = "red. Env";
>> + reg = <0x00750000 0x00010000>;
>> + };
>> + partition@760000 {
>> + label = "reserve";
>> + reg = <0x00760000 0x000a0000>;
>> + };
>> + };
>> +
>> + sram@1,0 {
>> + compatible = "sram";
>> + reg = <1 0x100000 0x100000>;
>> + };
>> +
>> + gpio-controller-100@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>
> Here I see "manroland", but the top level model and compatible
> properties use "man". Which should it be (I suspect "manroland" is a
> better choice).
You are right, I change this too "manroland".
>> + reg = <3 0x00600100 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-104@3,0 {
>
> These names should be:
> gpio-controller@3,600100
> gpio-controller@3,600104
> gpio-controller@3,600201
>
> etc.
OK, fix this.
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600104 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-200@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600200 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-201@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600201 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-202@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600202 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-203@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600203 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-204@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600204 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-206@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600206 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-207@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600207 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-20f@3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x0060020f 0x1>;
>> + gpio-controller;
>> + };
>> +
>> + display@3,0 {
>
> similarly, this should be display@3,600000
Ok.
>> + device_type = "pdsp-display";
>
> Drop device_type
Ok.
>> + compatible = "pdsp-display";
>
> No vendor prefix?
I take a look at this.
>> + reg = <3 0x00600000 0x1000>;
>> + };
>> + };
>> +
>> +};
Thanks for reviewing this patch
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply
* Re: [PATCH] mpc5200: support for the MAN mpc5200 based board mucmc52
From: Heiko Schocher @ 2009-09-14 14:09 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linuxppc-dev
In-Reply-To: <20090914080322.GA3164@pengutronix.de>
Hello Wolfram,
Wolfram Sang wrote:
> Hi,
>
>> + mpc5200_pic: interrupt-controller@500 {
>> + // 5200 interrupts are encoded into two levels;
>
> Grant, maybe this comment could be dropped also for the in-kernel dts-files? I
> think it is sufficently described in mpc5200.txt. I could prepare a patch if
> you agree.
>
>> + i2c@3d40 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,mpc5200-i2c","fsl-i2c";
>> + reg = <0x3d40 0x40>;
>> + interrupts = <2 16 0>;
>> + fsl5200-clocking;
>
> Please drop the clocking-line. It became obsolete.
OK, I fix this.
Thanks for reviewing
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply
* Re: [PATCH] mpc5200: support for the MAN mpc5200 based board mucmc52
From: Grant Likely @ 2009-09-14 13:43 UTC (permalink / raw)
To: hs; +Cc: linuxppc-dev
In-Reply-To: <4AADF93C.3030604@denx.de>
Hi Heiko.
Comments below.
On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs@denx.de> wrote:
> - serial Console on PSC1
> - 64MB SDRAM
> - MTD CFI Flash
> - Ethernet FEC
> - I2C with PCF8563 and Temp. Sensor ADM9240
> - IDE support
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
>
> =A0arch/powerpc/boot/dts/mucmc52.dts =A0 =A0 =A0 =A0 =A0 =A0| =A0231 ++++
> =A0arch/powerpc/configs/52xx/mucmc52_defconfig =A0| 1476 ++++++++++++++++=
++++++++++
Same comment as on your other patch. Drop the defconfig and add the
needed bits to mpc5200_defconfig (in a separate patch, and add drivers
as modules).
> diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mu=
cmc52.dts
> new file mode 100644
> index 0000000..a4a7a20
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mucmc52.dts
> @@ -0,0 +1,231 @@
> +/*
> + * mucmc52 board Device Tree Source
> + *
> + * Copyright (C) 2009 DENX Software Engineering GmbH
> + * Heiko Schocher <hs@denx.de>
> + *
> + * This program is free software; you can redistribute =A0it and/or modi=
fy it
> + * under =A0the terms of =A0the GNU General =A0Public License as publish=
ed by the
> + * Free Software Foundation; =A0either version 2 of the =A0License, or (=
at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + =A0 =A0 =A0 model =3D "man,mucmc52";
> + =A0 =A0 =A0 compatible =3D "man,mucmc52";
> + =A0 =A0 =A0 #address-cells =3D <1>;
> + =A0 =A0 =A0 #size-cells =3D <1>;
> + =A0 =A0 =A0 interrupt-parent =3D <&mpc5200_pic>;
> +
> + =A0 =A0 =A0 cpus {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <1>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <0>;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 PowerPC,5200@0 {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "cpu";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 d-cache-line-size =3D <32>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 i-cache-line-size =3D <32>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 d-cache-size =3D <0x4000>; =
=A0 =A0 =A0 =A0// L1, 16K
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 i-cache-size =3D <0x4000>; =
=A0 =A0 =A0 =A0// L1, 16K
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 timebase-frequency =3D <0>;=
=A0 =A0 =A0 // from bootloader
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 bus-frequency =3D <0>; =A0 =
=A0 =A0 =A0 =A0 =A0// from bootloader
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 clock-frequency =3D <0>; =
=A0 =A0 =A0 =A0 =A0// from bootloader
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 };
> + =A0 =A0 =A0 };
> +
> + =A0 =A0 =A0 memory {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "memory";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x00000000 0x04000000>; =A0// 64MB
> + =A0 =A0 =A0 };
> +
> + =A0 =A0 =A0 soc5200@f0000000 {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <1>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <1>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc5200-immr";
Does this board use the older and rarer non-'B' mpc5200 part? If not,
then fsl,mpc5200b-immr also needs to be in this list.
Cheers,
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH] mpc5200: support for the MAN mpc5200 based board uc101
From: Grant Likely @ 2009-09-14 13:38 UTC (permalink / raw)
To: hs; +Cc: linuxppc-dev
In-Reply-To: <4AADF94C.9040502@denx.de>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==
^ permalink raw reply
* Re: Oops in IDE probing on ppc_440 when PCI is enabled in strapping
From: Ludo Van Put @ 2009-09-14 13:08 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
In-Reply-To: <20090914125129.GB12372@zod.rchland.ibm.com>
2009/9/14 Josh Boyer <jwboyer@linux.vnet.ibm.com>:
> On Mon, Sep 14, 2009 at 02:36:15PM +0200, Ludo Van Put wrote:
>>Hi,
>>
>>we're working with a PPC440GX on a board that has a.o. a compact flash sl=
ot.
>>We had the PCI subsystem of the ppc disabled in strapping for quite a whi=
le,
>>until we wanted to start using it.
>>However, when we enabled PCI in the strapping and in the (patched 2.6.10)
>
> 2.6.10? =A0Really? =A0If that is truly the case, you probably aren't goin=
g to get
> a whole lot of help from the list, since that kernel is pretty ancient.
>
I can only acknowledge that, but we're stuck to that kernel for now...
>>kernel configuration, we triggered an oops when probing for IDE devices (=
to
>>read out the first 512 bytes of the CF). I can see that the ioremap64 cal=
l
>>in the driver code for our CF returns a different address (compared to PC=
I
>>disabled in strapping), but using this address later on for accessing the=
CF
>>goes wrong.
>
> Posting the oops output would perhaps help. =A0Or maybe not.
>
> josh
>
Here it goes, you never know:
Oops: kernel access of bad area, sig: 11 [#1]
PREEMPT
NIP: C0148050 LR: C013BC64 SP: C07CFEA0 REGS: c07cfdf0 TRAP: 0300 Not ta=
inted
MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
DAR: E3093000, DSISR: 00000000
TASK =3D c07cdb70[1] 'swapper' THREAD: c07ce000
Last syscall: 120
GPR00: 00000000 C07CFEA0 C07CDB70 E3093000 DFE829FE 00000100 C01184E8 C021B=
270
GPR08: C0220000 C02D0F60 C07CDEF8 C07CDEF8 00000000 70000000 1FFF6400 00000=
001
GPR16: 00000001 FFFFFFFF 1FFF06C0 00000000 00000001 C0220000 C0280000 00029=
000
GPR24: 00000000 C02D0F60 C01F0000 C0148040 00000080 00000000 DFE82A00 C02D0=
FF0
NIP [c0148050] ide_insw+0x10/0x24
LR [c013bc64] ata_input_data+0x74/0x114
Call backtrace:
c013e6a4 try_to_identify+0x2ec/0x5ec
c013eaa8 do_probe+0x104/0x304
c013f0c4 probe_hwif+0x358/0x6c4
c0140068 ideprobe_init+0xa8/0x1a0
c02a4ef8 ide_generic_init+0x10/0x28
c0001324 init+0xc4/0x244
c0004254 kernel_thread+0x44/0x60
Kernel panic - not syncing: Attempted to kill init!
<0>Rebooting in 180 seconds..
ide_insw is a asm routine to read in 16bit words and swap them. Copied
from arch/ppc/kernel/misc.S. Works fine when PCI is disabled.
KR, Ludo
^ permalink raw reply
* MPC8323 USB Host
From: spa_kk @ 2009-09-14 12:49 UTC (permalink / raw)
To: linuxppc-dev
Hello,
This is regarding the MPC8323 in-built USB controller driver,
Environment:
LTIB: ltib-mpc832x_rdb-20070507
Linux: linux-2.6.20
In built usb driver is been ported from linux-2.6.30 to linux-2.6.20
(File: drivers/usb/host/fhci-hcd.c is been ported from
kernel.org/linux-2.6.30)
Problem description:
File: "drivers/usb/host/fhci-hcd.c "
In this file probe function:
of_fhci_probe(struct of_device *ofdev, const struct of_device_id *ofid)
is getting loaded successfully &
FHCI Host Controller, interrupt and timer are getting registered
File:"drivers/usb/host/fhci-hub.c"
In this file function
fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
is been polled continuosly, which is checking for the port change and port
status of the our virtual hub using
fhci->vroot_hub->port.wPortChange &
fhci->vroot_hub->port.wPortStatus
The value in this variable are not getting changed even after connecting &
disconnection the device.
We have manual checked the USBRXP pin, this pin is
HIGH => when device is connected
LOW => when device is not connected.
Kindly let us know how should we debug/proceed.
Thanks and regards,
Krishna kumar M.S & Arif
--
View this message in context: http://www.nabble.com/MPC8323-USB-Host-tp25435195p25435195.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply
* Re: How to access DCR registers in powerpc440gx? Got err when use macro def in Linux kernel
From: Arnd Bergmann @ 2009-09-14 12:59 UTC (permalink / raw)
To: linuxppc-dev; +Cc: g r1x, David Gibson
In-Reply-To: <20090911053106.GB11840@yookeroo.seuss>
On Friday 11 September 2009, David Gibson wrote:
> On Fri, Sep 11, 2009 at 12:14:55PM +0800, g r1x wrote:
> > Now, I'm writing a DMA driver on powerpc
> > 440gx platform(2.6.26.5), as the only way to set up DMA Controller is
> > to access it's dcr registers with 'mfdcr' and 'mtdcr'.
> >
> > I've found some dma code in Linux kernel 2.6.26.5, so I copy the code
> > u wrote to my driver module directory, and include them, but when I
> > compile my driver, gcc complains following err messages:
>
> In current kernels we have some DCR macros that use a big table of
> pre-generated instructions in order to allow accesses to runtime
> computed DCR numbers. But either they didn't exist in 2.6.26, or they
> have a different name, I don't remember.
The portable way to access DCRs is the API from asm/dcr.h, using dcr_map(),
dcr_read() and dcr_write().
Arnd <><
^ permalink raw reply
* Re: Oops in IDE probing on ppc_440 when PCI is enabled in strapping
From: Josh Boyer @ 2009-09-14 12:51 UTC (permalink / raw)
To: Ludo Van Put; +Cc: linuxppc-dev
In-Reply-To: <5edaeed70909140536s53fb36ael4f0cb90abfe327e0@mail.gmail.com>
On Mon, Sep 14, 2009 at 02:36:15PM +0200, Ludo Van Put wrote:
>Hi,
>
>we're working with a PPC440GX on a board that has a.o. a compact flash slot.
>We had the PCI subsystem of the ppc disabled in strapping for quite a while,
>until we wanted to start using it.
>However, when we enabled PCI in the strapping and in the (patched 2.6.10)
2.6.10? Really? If that is truly the case, you probably aren't going to get
a whole lot of help from the list, since that kernel is pretty ancient.
>kernel configuration, we triggered an oops when probing for IDE devices (to
>read out the first 512 bytes of the CF). I can see that the ioremap64 call
>in the driver code for our CF returns a different address (compared to PCI
>disabled in strapping), but using this address later on for accessing the CF
>goes wrong.
Posting the oops output would perhaps help. Or maybe not.
josh
^ permalink raw reply
* Oops in IDE probing on ppc_440 when PCI is enabled in strapping
From: Ludo Van Put @ 2009-09-14 12:36 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 985 bytes --]
Hi,
we're working with a PPC440GX on a board that has a.o. a compact flash slot.
We had the PCI subsystem of the ppc disabled in strapping for quite a while,
until we wanted to start using it.
However, when we enabled PCI in the strapping and in the (patched 2.6.10)
kernel configuration, we triggered an oops when probing for IDE devices (to
read out the first 512 bytes of the CF). I can see that the ioremap64 call
in the driver code for our CF returns a different address (compared to PCI
disabled in strapping), but using this address later on for accessing the CF
goes wrong.
Does someone has an idea why this might go wrong? Can I end up with
overlapping address ranges due to the PCI subsystem being enabled? Is this
easy to check? As far as I know, the HW address of the PCI controller is in
a non-overlapping range with the addresses we have setup in the EBC
registers to probe for the CF (u-boot can see the IDE device just fine and
it also has PCI turned on).
TIA, Ludo
[-- Attachment #2: Type: text/html, Size: 1027 bytes --]
^ permalink raw reply
* Re: [PATCH] mpc5200: support for the MAN mpc5200 based board mucmc52
From: Wolfram Sang @ 2009-09-14 8:03 UTC (permalink / raw)
To: Heiko Schocher; +Cc: linuxppc-dev
In-Reply-To: <4AADF93C.3030604@denx.de>
[-- Attachment #1: Type: text/plain, Size: 725 bytes --]
Hi,
> + mpc5200_pic: interrupt-controller@500 {
> + // 5200 interrupts are encoded into two levels;
Grant, maybe this comment could be dropped also for the in-kernel dts-files? I
think it is sufficently described in mpc5200.txt. I could prepare a patch if
you agree.
> + i2c@3d40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200-i2c","fsl-i2c";
> + reg = <0x3d40 0x40>;
> + interrupts = <2 16 0>;
> + fsl5200-clocking;
Please drop the clocking-line. It became obsolete.
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [FTRACE] Enabling function_graph causes OOPS
From: Benjamin Herrenschmidt @ 2009-09-14 8:00 UTC (permalink / raw)
To: rostedt; +Cc: linuxppc-dev
In-Reply-To: <1252873548.8375.73.camel@pasglop>
On Mon, 2009-09-14 at 06:25 +1000, Benjamin Herrenschmidt wrote:
> > > .../...
> > >
> > > > Something is totally messed up here.
> > >
> > > Could it be that we don't handle R_PPC64_ADDR16_* relocs in
> > > arch/powerpc/kernel/modules/module_64.c ?
> > >
> > > Sachin, do you see a bunch of "Unknown ADD relocation" in your dmesg ?
> >
> > Ben,
> >
> > The thing is, this is kernel proper. This code is in entry_64.S not in
> > the module code.
>
> Argh... indeed.
>
> Sachin, can you give me more details on how you built that kernel ? (or
> give them again in case I missed them the first time around :-), ie,
> what toolchain, options, etc... or even better, give me remote access to
> the build host ?
Ok, got access and had a quick look... seems to be a toolchain problem
to me. I'll investigate more tomorrow.
Cheers,
Ben.
^ permalink raw reply
* [PATCH] mpc5200: support for the MAN mpc5200 based board uc101
From: Heiko Schocher @ 2009-09-14 8:05 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support
Signed-off-by: Heiko Schocher <hs@denx.de>
---
- based on:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
- checked with:
$ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
total: 0 errors, 0 warnings, 1622 lines checked
0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
$
arch/powerpc/boot/dts/uc101.dts | 312 ++++++
arch/powerpc/configs/52xx/uc101_defconfig | 1303 ++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
3 files changed, 1616 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/uc101.dts
create mode 100644 arch/powerpc/configs/52xx/uc101_defconfig
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 0000000..28e1c90
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,312 @@
+/*
+ * uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "man,uc101";
+ compatible = "man,uc101";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ interrupts = <0 0 3>;
+ };
+
+ gpt1: timer@610 { // General Purpose Timer 1 in GPIO mode
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ gpio-controller;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer 2 in GPIO mode
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer 3 in GPIO mode
+ compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { // PSC2
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { // PSC6
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 6 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl5200-clocking;
+
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "rtc,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0x80000000 0x00800000
+ 3 0 0x80000000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00010000>;
+ };
+ partition@750000 {
+ label = "red. Env";
+ reg = <0x00750000 0x00010000>;
+ };
+ partition@760000 {
+ label = "reserve";
+ reg = <0x00760000 0x000a0000>;
+ };
+ };
+
+ sram@1,0 {
+ compatible = "sram";
+ reg = <1 0x100000 0x100000>;
+ };
+
+ gpio-controller-100@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600100 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-104@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600104 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-200@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600200 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-201@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600201 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-202@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600202 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-203@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600203 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-204@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600204 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-206@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600206 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-207@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600207 0x1>;
+ gpio-controller;
+ };
+ gpio-controller-20f@3,0 {
+ #gpio-cells = <2>;
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x0060020f 0x1>;
+ gpio-controller;
+ };
+
+ display@3,0 {
+ device_type = "pdsp-display";
+ compatible = "pdsp-display";
+ reg = <3 0x00600000 0x1000>;
+ };
+ };
+
+};
diff --git a/arch/powerpc/configs/52xx/uc101_defconfig b/arch/powerpc/configs/52xx/uc101_defconfig
new file mode 100644
index 0000000..c2ae577
--- /dev/null
+++ b/arch/powerpc/configs/52xx/uc101_defconfig
@@ -0,0 +1,1303 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Mon Sep 14 08:53:03 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_MPC52xx=y
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+CONFIG_SENSORS_ADM9240=y
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index 7794bd8..fd9f894 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -52,6 +52,7 @@ static void __init mpc5200_simple_setup_arch(void)
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
"man,mucmc52",
+ "man,uc101",
"phytec,pcm030",
"phytec,pcm032",
"promess,motionpro",
--
1.6.0.6
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply related
* [PATCH] mpc5200: support for the MAN mpc5200 based board mucmc52
From: Heiko Schocher @ 2009-09-14 8:05 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support
Signed-off-by: Heiko Schocher <hs@denx.de>
---
- based on:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
- checked with:
$ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch
total: 0 errors, 0 warnings, 1714 lines checked
0001-mpc5200-support-for-the-MAN-mpc5200-based-board-muc.patch has no obvious style problems and is ready for submission.
$
arch/powerpc/boot/dts/mucmc52.dts | 231 ++++
arch/powerpc/configs/52xx/mucmc52_defconfig | 1476 ++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
3 files changed, 1708 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mucmc52.dts
create mode 100644 arch/powerpc/configs/52xx/mucmc52_defconfig
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 0000000..a4a7a20
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,231 @@
+/*
+ * mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "man,mucmc52";
+ compatible = "man,mucmc52";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ gpio-controller;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { // PSC2
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { // PSC6
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 6 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl5200-clocking;
+
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "rtc,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xff800000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00020000>;
+ };
+ partition@760000 {
+ label = "red. Env";
+ reg = <0x00760000 0x00020000>;
+ };
+ partition@780000 {
+ label = "reserve";
+ reg = <0x00780000 0x00080000>;
+ };
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+};
diff --git a/arch/powerpc/configs/52xx/mucmc52_defconfig b/arch/powerpc/configs/52xx/mucmc52_defconfig
new file mode 100644
index 0000000..fa0a01e
--- /dev/null
+++ b/arch/powerpc/configs/52xx/mucmc52_defconfig
@@ -0,0 +1,1476 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Mon Sep 14 08:31:50 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+CONFIG_SENSORS_ADM9240=y
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index c31e5b5..7794bd8 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
+ "man,mucmc52",
"phytec,pcm030",
"phytec,pcm032",
"promess,motionpro",
--
1.6.0.6
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply related
* Re: [PATCH 4/5] kernel handling of memory DLPAR
From: Andrey Panin @ 2009-09-14 6:39 UTC (permalink / raw)
To: Nathan Fontenot; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <4AAABDBB.7010400@austin.ibm.com>
On 254, 09 11, 2009 at 04:14:35PM -0500, Nathan Fontenot wrote:
> This adds the capability to DLPAR add and remove memory from the kernel. The
> patch extends the powerpc handling of memory_add_physaddr_to_nid(), which is
> called from the sysfs memory 'probe' file to first ensure that the memory
> has been added to the system. This is done by creating a platform specific
> callout from the routine. The pseries implementation of this handles the
> DLPAR work to add the memory to the system and update the device tree.
>
> The patch also creates a pseries only 'release' sys file,
> /sys/devices/system/memory/release. This file handles the DLPAR
> release of
> memory back to firmware and updating of the device-tree.
>
> Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
> +static struct property *clone_property(struct property *old_prop)
> +{
> + struct property *new_prop;
> +
> + new_prop = kzalloc((sizeof *new_prop), GFP_KERNEL);
> + if (!new_prop)
> + return NULL;
> +
> + new_prop->name = kzalloc(strlen(old_prop->name) + 1, GFP_KERNEL);
> + new_prop->value = kzalloc(old_prop->length + 1, GFP_KERNEL);
Memory leak here. What if one kzalloc() succeeded and another failed ?
> + if (!new_prop->name || !new_prop->value) {
> + free_property(new_prop);
> + return NULL;
> + }
> +
> + strcpy(new_prop->name, old_prop->name);
> + memcpy(new_prop->value, old_prop->value, old_prop->length);
> + new_prop->length = old_prop->length;
> +
> + return new_prop;
> +}
^ permalink raw reply
* Re: [PATCH 5/5] kernel handling of CPU DLPAR
From: Andrey Panin @ 2009-09-14 6:41 UTC (permalink / raw)
To: Nathan Fontenot; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <4AAABDF5.4090604@austin.ibm.com>
On 254, 09 11, 2009 at 04:15:33PM -0500, Nathan Fontenot wrote:
> This adds the capability to DLPAR add and remove CPUs from the kernel. The
> creates two new files /sys/devices/system/cpu/probe and
> /sys/devices/system/cpu/release to handle the DLPAR addition and
> removal of
> CPUs respectively.
>
> CPU DLPAR add is accomplished by writing the drc-index of the CPU to the
> probe file, and removal is done by writing the device-tree path of the cpu
> to the release file.
>
> Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
> +static ssize_t cpu_probe_store(struct class *class, const char *buf,
> + size_t count)
> +{
> + struct device_node *dn;
> + u32 drc_index;
> + char *cpu_name;
> + int rc;
> +
> + drc_index = simple_strtoull(buf, NULL, 0);
> + if (!drc_index)
> + return -EINVAL;
> +
> + rc = acquire_drc(drc_index);
> + if (rc)
> + return rc;
> +
> + dn = configure_connector(drc_index);
> + if (!dn) {
> + release_drc(drc_index);
> + return rc;
> + }
> +
> + /* fixup dn name */
> + cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus/") + 1,
> + GFP_KERNEL);
Unchecked memory allocation with immediate crash in case of failure.
> + sprintf(cpu_name, "/cpus/%s", dn->full_name);
> + kfree(dn->full_name);
> + dn->full_name = cpu_name;
> +
> + rc = add_device_tree_nodes(dn);
> + if (rc)
> + release_drc(drc_index);
> +
> + return rc ? rc : count;
> +}
> +
> +static ssize_t cpu_release_store(struct class *class, const char *buf,
> + size_t count)
> +{
> + struct device_node *dn;
> + u32 *drc_index;
> + int rc;
> +
> + dn = of_find_node_by_path(buf);
> + if (!dn)
> + return -EINVAL;
> +
> + drc_index = (u32 *)of_get_property(dn, "ibm,my-drc-index", NULL);
> + if (!drc_index) {
> + of_node_put(dn);
> + return -EINVAL;
> + }
> +
> + rc = release_drc(*drc_index);
> + if (rc) {
> + of_node_put(dn);
> + return rc;
> + }
> +
> + rc = remove_device_tree_nodes(dn);
> + if (rc)
> + acquire_drc(*drc_index);
> +
> + of_node_put(dn);
> + return rc? rc : count;
> +}
> +
> static struct class_attribute class_attr_mem_release =
> __ATTR(release, S_IWUSR, NULL, memory_release_store);
> +static struct class_attribute class_attr_cpu_probe =
> + __ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
> +static struct class_attribute class_attr_cpu_release =
> + __ATTR(release, S_IWUSR, NULL, cpu_release_store);
>
> static int pseries_dlpar_init(void)
> {
> @@ -576,6 +648,18 @@
> printk(KERN_INFO "DLPAR: Could not create sysfs memory "
> "release file\n");
>
> + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
> + &class_attr_cpu_probe.attr);
> + if (rc)
> + printk(KERN_INFO "DLPAR: Could not create sysfs cpu "
> + "probe file\n");
> +
> + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
> + &class_attr_cpu_release.attr);
> + if (rc)
> + printk(KERN_INFO "DLPAR: Could not create sysfs cpu "
> + "release file\n");
> +
> return 0;
> }
> __initcall(pseries_dlpar_init);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply
* Re: [2/5] Cleanup management of kmem_caches for pagetables
From: David Gibson @ 2009-09-14 4:56 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1252880891.8375.94.camel@pasglop>
On Mon, Sep 14, 2009 at 08:28:11AM +1000, Benjamin Herrenschmidt wrote:
> On Wed, 2009-09-09 at 15:59 +1000, David Gibson wrote:
>
> > 6 files changed, 73 insertions(+), 108 deletions(-)
>
> That's a pretty good start :-)
Isn't it :)
> > +struct kmem_cache *pgtable_cache[PGF_SHIFT_MASK];
> > +
> > +void pgtable_cache_add(unsigned shift, void (*ctor)(void *))
> > +{
> > + char *name;
> > + unsigned long table_size = sizeof(void *) << shift;
> > + struct kmem_cache *new;
> > +
> > + BUG_ON((shift < 1) || (shift > PGF_SHIFT_MASK));
> > + if (PGT_CACHE(shift))
> > + return; /* Already have a cache of this size */
> > + name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
> > + new = kmem_cache_create(name, table_size, table_size, 0, ctor);
> > + PGT_CACHE(shift) = new;
> > +}
>
> I'm getting partial to verbose boot nowadays :-) At least a pr_debug if
> not a pr_info up there "Allocated pgtable for order %d" or something
> like that might end up being of some use when debugging things.
Ok.
> > void pgtable_cache_init(void)
> > {
> > - pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
> > - pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
> > + pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
> > + pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor);
> > + if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE))
> > + panic("Couldn't allocate pgtable caches");
> > + BUG_ON(!PGT_CACHE(PUD_INDEX_SIZE));
>
> What if PUD_INDEX_SIZE is 0 ? (64k pages)
Uh.. good question. Um.. I booted with 64k pages, how did that
work...
> Couldn't we just do a
>
> if (PUD_INDEX_SIZE)
> pgtable_cache_add(PUD_INDEX_SIZE...)
>
> If it's the same size as another cache it would just not do anything...
Yeah, that makes sense.
> > -static inline void pgtable_free(pgtable_free_t pgf)
> > +static inline void pgtable_free(void *table, unsigned index_size)
> > {
> > - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
> > - int cachenum = pgf.val & PGF_CACHENUM_MASK;
> > -
> > - if (cachenum == PTE_NONCACHE_NUM)
> > - free_page((unsigned long)p);
> > - else
> > - kmem_cache_free(pgtable_cache[cachenum], p);
> > + if (!index_size)
> > + free_page((unsigned long)table);
> > + else {
> > + BUG_ON(index_size > PGF_SHIFT_MASK);
> > + kmem_cache_free(PGT_CACHE(index_size), table);
> > + }
> > }
>
> Out of curiosity, what is the index_size == 0 case for ? Do we still use
> it ? Agh... found it ... we don't put PTE pages in a cache, just use
> gfp. I suppose that's lower overhead.
Well, and I didn't want to have the extra churn of converting it to
use a kmem_cache in any case.
> > /* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
> > * and small enough to fit in the low bits of any naturally aligned page
> > * table cache entry. Arbitrarily set to 0x1f, that should give us some
> > * room to grow
> > */
>
> The comment above will need updating (don't just remove it, please -do-
> explain what it's all about :-)
Ah, yes, oops.
> > -#define PGF_CACHENUM_MASK 0x1f
> > -
> > -static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
> > - unsigned long mask)
> > -{
> > - BUG_ON(cachenum > PGF_CACHENUM_MASK);
> > -
> > - return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
> > -}
> > +#define PGF_SHIFT_MASK 0xf
>
> That does bring one question tho... You still fill the batch by sticking
> the shift into the low bits of the table right ? Which means that your
> table must have at least 4 bits 0 at the bottom, ie, it must at least
> have 2 pointers on 64-bit and 4 on 32-bit. Maybe you should add some
> runtime test for the later (your comparisons to 1 do the job for 64-bit
> but not for 32-bit or did I miss something ?)
Ah.. yes, I believe that's a bug, which will actually be removed as a
side-effect of the next patch. The new hugepage pagetable format
introduces a similar alignment requirement on the pagetable chunks,
because the hugepage pgd/pud/pmd pointers also contain a shift.
That patch includes a change to pgtable_cache_add() to force the
alignment of each new kmem_cache() up to the minimum. But yes, that
should be adjusted to cover the pgtable free batches requirement as
well and moved back to this patch.
> Overall, a really nice cleanup... the previous stuff was hairy and prone
> to breakage (see how it broke it twice due to misaligned cache names
> array during the build-up of the book3e support). I'm actually tempted,
> with a bit more testing, to sneak that into .32 despite arriving a bit
> late, because the current code is really fragile.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* Re: [2/5] Cleanup management of kmem_caches for pagetables
From: Benjamin Herrenschmidt @ 2009-09-13 22:28 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-dev
In-Reply-To: <20090909055916.58003B7B60@bilbo.ozlabs.org>
On Wed, 2009-09-09 at 15:59 +1000, David Gibson wrote:
> 6 files changed, 73 insertions(+), 108 deletions(-)
That's a pretty good start :-)
> +struct kmem_cache *pgtable_cache[PGF_SHIFT_MASK];
> +
> +void pgtable_cache_add(unsigned shift, void (*ctor)(void *))
> +{
> + char *name;
> + unsigned long table_size = sizeof(void *) << shift;
> + struct kmem_cache *new;
> +
> + BUG_ON((shift < 1) || (shift > PGF_SHIFT_MASK));
> + if (PGT_CACHE(shift))
> + return; /* Already have a cache of this size */
> + name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
> + new = kmem_cache_create(name, table_size, table_size, 0, ctor);
> + PGT_CACHE(shift) = new;
> +}
I'm getting partial to verbose boot nowadays :-) At least a pr_debug if
not a pr_info up there "Allocated pgtable for order %d" or something
like that might end up being of some use when debugging things.
> void pgtable_cache_init(void)
> {
> - pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
> - pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
> + pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
> + pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor);
> + if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE))
> + panic("Couldn't allocate pgtable caches");
> + BUG_ON(!PGT_CACHE(PUD_INDEX_SIZE));
What if PUD_INDEX_SIZE is 0 ? (64k pages)
Couldn't we just do a
if (PUD_INDEX_SIZE)
pgtable_cache_add(PUD_INDEX_SIZE...)
If it's the same size as another cache it would just not do anything...
> -static inline void pgtable_free(pgtable_free_t pgf)
> +static inline void pgtable_free(void *table, unsigned index_size)
> {
> - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
> - int cachenum = pgf.val & PGF_CACHENUM_MASK;
> -
> - if (cachenum == PTE_NONCACHE_NUM)
> - free_page((unsigned long)p);
> - else
> - kmem_cache_free(pgtable_cache[cachenum], p);
> + if (!index_size)
> + free_page((unsigned long)table);
> + else {
> + BUG_ON(index_size > PGF_SHIFT_MASK);
> + kmem_cache_free(PGT_CACHE(index_size), table);
> + }
> }
Out of curiosity, what is the index_size == 0 case for ? Do we still use
it ? Agh... found it ... we don't put PTE pages in a cache, just use
gfp. I suppose that's lower overhead.
> /* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
> * and small enough to fit in the low bits of any naturally aligned page
> * table cache entry. Arbitrarily set to 0x1f, that should give us some
> * room to grow
> */
The comment above will need updating (don't just remove it, please -do-
explain what it's all about :-)
> -#define PGF_CACHENUM_MASK 0x1f
> -
> -static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
> - unsigned long mask)
> -{
> - BUG_ON(cachenum > PGF_CACHENUM_MASK);
> -
> - return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
> -}
> +#define PGF_SHIFT_MASK 0xf
That does bring one question tho... You still fill the batch by sticking
the shift into the low bits of the table right ? Which means that your
table must have at least 4 bits 0 at the bottom, ie, it must at least
have 2 pointers on 64-bit and 4 on 32-bit. Maybe you should add some
runtime test for the later (your comparisons to 1 do the job for 64-bit
but not for 32-bit or did I miss something ?)
Overall, a really nice cleanup... the previous stuff was hairy and prone
to breakage (see how it broke it twice due to misaligned cache names
array during the build-up of the book3e support). I'm actually tempted,
with a bit more testing, to sneak that into .32 despite arriving a bit
late, because the current code is really fragile.
Cheers,
Ben.
^ permalink raw reply
* Re: [FTRACE] Enabling function_graph causes OOPS
From: Benjamin Herrenschmidt @ 2009-09-13 20:25 UTC (permalink / raw)
To: rostedt; +Cc: linuxppc-dev
In-Reply-To: <1252848060.26049.647.camel@gandalf.stny.rr.com>
> > .../...
> >
> > > Something is totally messed up here.
> >
> > Could it be that we don't handle R_PPC64_ADDR16_* relocs in
> > arch/powerpc/kernel/modules/module_64.c ?
> >
> > Sachin, do you see a bunch of "Unknown ADD relocation" in your dmesg ?
>
> Ben,
>
> The thing is, this is kernel proper. This code is in entry_64.S not in
> the module code.
Argh... indeed.
Sachin, can you give me more details on how you built that kernel ? (or
give them again in case I missed them the first time around :-), ie,
what toolchain, options, etc... or even better, give me remote access to
the build host ?
Cheers,
Ben.
^ permalink raw reply
* Re: MPC5200/BestComm functions question
From: Albrecht Dreß @ 2009-09-13 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <fa686aa40909120701k4c4faa8ev78ac556f0b1f88ed@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1037 bytes --]
Am 12.09.09 16:01 schrieb(en) Grant Likely:
> I've actually got a better driver which exports an API for doing
> local plus bus FIFO transfers. It's been posted to the mailing list
> a couple of times. I'll cc: you the next time I post it (real soon
> now).
Thanks a lot, that will be really helpful! :-)
> Bestcomm can do that, but Freescale has not publically released the
> bestcomm documentation, and they do not support writing custom
> bestcomm tasks. From what I understand there are a number of hidden
> bugs in the bestcomm engine which you could run into if you deviate
> from the provided tasks. You're very much on your own if you go down
> that route. :-(
I see - that's a pity, shifting those tasks to a "coprocessor" sounds
like an attractive idea!
BTW, I didn't forget about the 5200 GPT/WDT issue, I just didn't have
the time yet to implement it. The old work vs. what I would like to do
conflict, but I will try to find a reasonable solution.
Thanks, Albrecht.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [FTRACE] Enabling function_graph causes OOPS
From: Steven Rostedt @ 2009-09-13 13:21 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1252816650.8375.70.camel@pasglop>
On Sun, 2009-09-13 at 14:37 +1000, Benjamin Herrenschmidt wrote:
> On Sun, 2009-09-13 at 00:07 -0400, Steven Rostedt wrote:
> > 982: R_PPC64_ADDR16_HIGHEST
> > ftrace_return_to_handler
> > 984: 60 84 00 00 ori r4,r4,0
> > 986: R_PPC64_ADDR16_HIGHER
> > ftrace_return_to_handler
> > 988: 78 84 07 c6 rldicr r4,r4,32,31
> > 98c: 64 84 00 00 oris r4,r4,0
> > 98e: R_PPC64_ADDR16_HI
> > ftrace_return_to_handler
> > 990: 60 84 00 00 ori r4,r4,0
> > 992: R_PPC64_ADDR16_LO
> > ftrace_return_to_handler
> > 994: e8 44 00 08 ld r2,8(r4)
> > 998: 48 00 00 01 bl 998 <.mod_return_to_handler+0x30>
> > 998:
> > R_PPC64_REL24 .ftrace_return_to_handler
> > 99c: 60 00 00 00 nop
> > 9a0: 7c 68 03 a6 mtlr r3
>
> .../...
>
> > Something is totally messed up here.
>
> Could it be that we don't handle R_PPC64_ADDR16_* relocs in
> arch/powerpc/kernel/modules/module_64.c ?
>
> Sachin, do you see a bunch of "Unknown ADD relocation" in your dmesg ?
Ben,
The thing is, this is kernel proper. This code is in entry_64.S not in
the module code.
-- Steve
^ permalink raw reply
* Re: [FTRACE] Enabling function_graph causes OOPS
From: Benjamin Herrenschmidt @ 2009-09-13 4:37 UTC (permalink / raw)
To: rostedt; +Cc: linuxppc-dev
In-Reply-To: <1252814877.26049.93.camel@gandalf.stny.rr.com>
On Sun, 2009-09-13 at 00:07 -0400, Steven Rostedt wrote:
> 982: R_PPC64_ADDR16_HIGHEST
> ftrace_return_to_handler
> 984: 60 84 00 00 ori r4,r4,0
> 986: R_PPC64_ADDR16_HIGHER
> ftrace_return_to_handler
> 988: 78 84 07 c6 rldicr r4,r4,32,31
> 98c: 64 84 00 00 oris r4,r4,0
> 98e: R_PPC64_ADDR16_HI
> ftrace_return_to_handler
> 990: 60 84 00 00 ori r4,r4,0
> 992: R_PPC64_ADDR16_LO
> ftrace_return_to_handler
> 994: e8 44 00 08 ld r2,8(r4)
> 998: 48 00 00 01 bl 998 <.mod_return_to_handler+0x30>
> 998:
> R_PPC64_REL24 .ftrace_return_to_handler
> 99c: 60 00 00 00 nop
> 9a0: 7c 68 03 a6 mtlr r3
.../...
> Something is totally messed up here.
Could it be that we don't handle R_PPC64_ADDR16_* relocs in
arch/powerpc/kernel/modules/module_64.c ?
Sachin, do you see a bunch of "Unknown ADD relocation" in your dmesg ?
Ben.
^ permalink raw reply
* Re: [FTRACE] Enabling function_graph causes OOPS
From: Steven Rostedt @ 2009-09-13 4:07 UTC (permalink / raw)
To: Sachin Sant; +Cc: linuxppc-dev
In-Reply-To: <4AA74AE2.5090001@in.ibm.com>
On Wed, 2009-09-09 at 11:57 +0530, Sachin Sant wrote:
> Steven Rostedt wrote:
> > I'm going through old email, and I found this. Do you still see this
> > error. I don't recall seeing it myself.
> >
> I can still recreate this with 31-rc9. When i enable tracing
> with function_graph i notice the following oops. This happens
> only once. Later if i try to enable/disable tracing i don't
> get this oops message. This behavior is observed only with
> function_graph. Other tracers work fine.
>
> Oops: Kernel access of bad area, sig: 11 [#1]
> SMP NR_CPUS=1024 NUMA pSeries
> Modules linked in: ipv6 fuse loop dm_mod sr_mod ehea ibmveth sg cdrom sd_mod crc_t10dif ibmvscsic scsi_transport_srp scsi_tgt scsi_mod
> NIP: c000000000008f30 LR: c000000000008f04 CTR: 80000000000f6d68
> REGS: c00000003e98f560 TRAP: 0300 Not tainted (2.6.31-rc9)
> MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24000422 XER: 00000020
> DAR: 0000000000000008, DSISR: 0000000040000000
> TASK = c00000003e953b20[2483] 'irqbalance' THREAD: c00000003e98c000 CPU: 1
> GPR00: c000000000008f04 c00000003e98f7e0 d00000000117ed38 0000000000000000
> GPR04: 0000000000000000 0000000066000000 00000000000010bf 0000000000000000
> GPR08: 0000000000000000 800000010021bb40 00000000000000ff 800000010021bb60
> GPR12: 0000000000000002 c000000001032800 0000000000000000 ffffffffeffdff68
> GPR16: 00000fffa39fd6a0 00000fffa39e6c38 c00000003ebe9c38 fffffffffffff000
> GPR20: c00000002a6cf980 c00000003e98fdf8 c00000003e98fba8 00000fffa1740000
> GPR24: fffffffffffff000 8001000003000000 ffe0000000000000 0000000000000009
> GPR28: c00000003db40000 0000000000020000 d00000000117da78 c00000003e98f850
> NIP [c000000000008f30] .mod_return_to_handler+0x2c/0x64
> LR [c000000000008f04] .mod_return_to_handler+0x0/0x64
> Call Trace:
> [c00000003e98f7e0] [c00000002a6cf980] 0xc00000002a6cf980 (unreliable)
> [c00000003e98f850] [c000000000008f04] .mod_return_to_handler+0x0/0x64
> [c00000003e98f900] [c000000000008f04] .mod_return_to_handler+0x0/0x64
> [c00000003e98f9a0] [c000000000008f04] .mod_return_to_handler+0x0/0x64
> [c00000003e98fa30] [c000000000008ed0] .return_to_handler+0x0/0x34 (.bad_page_fault+0xc8/0xe8)
> [c00000003e98fb30] [c000000000008ed0] .return_to_handler+0x0/0x34 (handle_page_fault+0x3c/0x5c)
> [c00000003e98fc20] [c000000000008ed0] .return_to_handler+0x0/0x34 (.ehea_h_query_ehea_port+0x74/0x9c [ehea])
> [c00000003e98fcd0] [c000000000008ed0] .return_to_handler+0x0/0x34 (.ehea_get_stats+0xa0/0x1d0 [ehea])
> [c00000003e98fd80] [c000000000008ed0] .return_to_handler+0x0/0x34 (.dev_get_stats+0x50/0xec)
> [c00000003e98fe30] [c000000000008ed0] .return_to_handler+0x0/0x34 (.dev_seq_show+0x5c/0x140)
> Instruction dump:
> 4e800020 f881ffe0 f861ffe8 f841fff0 fbe1fff8 7c3f0b78 f821ff91 3c800000
> 60840000 788407c6 64840000 60840000 <e8440008> 48126375 60000000 7c6803a6
> ---[ end trace bb43efc994aed790 ]---
I'm looking at your back dump and this really bothers me. I did a
objdump -dr arch/powerpc/kernel/entry_64.o and this is what I have:
0000000000000968 <.mod_return_to_handler>:
968: f8 81 ff e0 std r4,-32(r1)
96c: f8 61 ff e8 std r3,-24(r1)
970: f8 41 ff f0 std r2,-16(r1)
974: fb e1 ff f8 std r31,-8(r1)
978: 7c 3f 0b 78 mr r31,r1
97c: f8 21 ff 91 stdu r1,-112(r1)
980: 3c 80 00 00 lis r4,0
982: R_PPC64_ADDR16_HIGHEST ftrace_return_to_handler
984: 60 84 00 00 ori r4,r4,0
986: R_PPC64_ADDR16_HIGHER ftrace_return_to_handler
988: 78 84 07 c6 rldicr r4,r4,32,31
98c: 64 84 00 00 oris r4,r4,0
98e: R_PPC64_ADDR16_HI ftrace_return_to_handler
990: 60 84 00 00 ori r4,r4,0
992: R_PPC64_ADDR16_LO ftrace_return_to_handler
994: e8 44 00 08 ld r2,8(r4)
998: 48 00 00 01 bl 998 <.mod_return_to_handler+0x30>
998: R_PPC64_REL24 .ftrace_return_to_handler
99c: 60 00 00 00 nop
9a0: 7c 68 03 a6 mtlr r3
The bug happened at mod_return_to_handler+0x2c which is 994 above. Your
reg dump shows r4 is 0, and worse yet, looking at the code:
4e800020 f881ffe0 f861ffe8 f841fff0 fbe1fff8 7c3f0b78 f821ff91 3c800000
60840000 788407c6 64840000 60840000 <e8440008> 48126375 60000000
7c6803a6
The 64840000 60840000 shows that the linker never resolved the address
to ftrace_return_to_handle??
Something is totally messed up here.
-- Steve
^ permalink raw reply
* [PATCH] powerpc/pmc: Don't access lppaca on Book3E
From: Benjamin Herrenschmidt @ 2009-09-13 2:08 UTC (permalink / raw)
To: linuxppc-dev list; +Cc: Paul Mackerras
It doesn't exist !
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/pmc.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index ccc68b5..5a9ede4 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -29,7 +29,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq);
void release_pmc_hardware(void);
void ppc_enable_pmcs(void);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/lppaca.h>
static inline void ppc_set_pmu_inuse(int inuse)
--
1.6.0.4
^ permalink raw reply related
* Re: [RFC] powerpc/irq: Add generic API for setting up cascaded IRQs
From: Grant Likely @ 2009-09-12 14:05 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1252736925.8375.65.camel@pasglop>
On Sat, Sep 12, 2009 at 12:28 AM, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> On Fri, 2009-09-11 at 23:46 -0600, Grant Likely wrote:
>> From: Grant Likely <grant.likely@secretlab.ca>
>>
>> prototype implementation. =A0This probably doesn't work at all right now=
.
>>
>> Ben, I'm posting this now to get your thoughts before I go too far down
>> this path.
>
> Looks ok. I was initially thinking about putting get_irq() in irq_host,
> but as we discussed on IRC, a host is not necessarily a PIC, and it's
> nice for the parent to have a way to setup/init the cascade in case
> it needs to do some HW tweaking there as well.
Cool. Thanks for the review. I'll continue on with this approach and
hopefully get something working this weekend.
> However, why cascade_setup() and not setup_cascade() which sounds
> somewhat more natural ? :-)
I'm a reverse polish kind of guy. I preferring 'subject'_'action'
over 'action'_'subject' just because it groups like subjects together.
But it doesn't matter much, especially in this case where 'subject'
is in a group of exactly 1. :-)
I'll do whichever you prefer.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: MPC5200/BestComm functions question
From: Grant Likely @ 2009-09-12 14:01 UTC (permalink / raw)
To: Albrecht Dreß; +Cc: Linux PPC Development
In-Reply-To: <1252758988.3310.0@antares>
On Sat, Sep 12, 2009 at 6:36 AM, Albrecht Dre=DF <albrecht.dress@arcor.de> =
wrote:
> Hi all,
>
> I have a MPC5200B based system with a 16-bit peripheral attached to the
> Local Bus, and I am looking into possibilities to use BestComm for the da=
ta
> transfer.
>
> I found Grant Likely's cool 'mpc5200-localplus-test.c' driver which
> demonstrates this using the 'gen_bd' driver, and which is apparently a gr=
eat
> starting point.
I've actually got a better driver which exports an API for doing local
plus bus FIFO transfers. It's been posted to the mailing list a
couple of times. I'll cc: you the next time I post it (real soon
now).
> However, I also have to (a) 32-bit endianess-swap the data and (b) calcul=
ate
> a 32-bit crc on it. =A0Of course, this is possible with the buffers using=
the
> cpu, but I saw some remarks that the Bestcomm engine also includes functi=
ons
> which can perform swapping and crc calculation. =A0I believe it would unl=
oad
> the cpu if the BestComm engine could perform these tasks, but I cannot fi=
nd
> a good documentation/example for that. =A0Does anyone know any pointers f=
or
> that? =A0Or maybe even a tool to create the bestcomm tasks from a 'readab=
le'
> source?
Bestcomm can do that, but Freescale has not publically released the
bestcomm documentation, and they do not support writing custom
bestcomm tasks. From what I understand there are a number of hidden
bugs in the bestcomm engine which you could run into if you deviate
from the provided tasks. You're very much on your own if you go down
that route. :-(
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox