* Re: ppc rfi in head.s result in a reset?
From: Tonyliu @ 2009-11-05 2:13 UTC (permalink / raw)
To: wilbur.chan; +Cc: linuxppc-dev
In-Reply-To: <e997b7420910161821g3d71c5fcy6fbf72f40d52c1c3@mail.gmail.com>
wilbur.chan wrote:
> ppc 6xx
>
> In platform_init function of sandpoint.c , I delete the code of
> getting command line from uboot, and set command_line to a fixed value
> , which are like this:
>
> sandpoint.c--> platform_init
> #if 0
> if (r3 && r6) {
> /* copy board info structure */
> memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
> /* copy command line */
> *(char *)(r7+KERNELBASE) = 0;
> strcpy(cmd_line, (char *)(r6+KERNELBASE));
> }
> #endif
> strcpy(cmd_line, "xxx");
>
>
Which version your kernel is ? I cant find sandpoint.c in powerpc git tree.
And I suspect it's conditional "if (r3 && r6)" to copy cmd_line, and
your change makes it unconditioned. Maybe it
will affect something.
Tony
> But I found that , when calling start_kernel in head.S (by rfi
> instruction), the borad was reset into uboot, that is :
>
> li r4,MSR_KERNEL
> FIX_SRR1(r4,r5)
> lis r3,start_kernel@h
> ori r3,r3,start_kernel@l
> mtspr SPRN_SRR0,r3
> mtspr SPRN_SRR1,r4
> SYNC
> RFI //reset,why?
>
>
> The RFI instruction here, caused the board reset to uboot. Can
> someone give me some advice on how could this happened?
>
> Thank you
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>
--
Tony Liu | Liu Bo
-------------------------------------------------------------
WIND RIVER | China Development Center
Tel: 86-10-8477-8542 ext: 8542 | Fax: 86-10-64790367
(M): 86-136-7117-3612
Address: 15/F, Wangjing TowerB, Chaoyang District, Beijing, P.R.China
^ permalink raw reply
* Re: [powerpc] Next tree Nov 2 : kernel BUG at mm/mmap.c:2135!
From: Sachin Sant @ 2009-11-05 4:42 UTC (permalink / raw)
To: dwg; +Cc: Linux/PPC Development, linux-next
In-Reply-To: <20091105001650.GD3613@yookeroo.seuss>
[-- Attachment #1: Type: text/plain, Size: 958 bytes --]
David Gibson wrote:
> On Wed, Nov 04, 2009 at 06:08:44PM +0530, Sachin Sant wrote:
>
>> Sachin Sant wrote:
>>
>>> Today's next tree failed to boot on a POWER 6 box with :
>>>
>>> ------------[ cut here ]------------
>>> kernel BUG at mm/mmap.c:2135!
>>> Oops: Exception in kernel mode, sig: 5 [#2]
>>> SMP NR_CPUS=1024 NUMA pSeries
>>>
>> Problem exists with today's next as well.
>>
>> Likely cause for this problem seems to the following commit.
>> If i revert this patch the machine boots fine.
>>
>> commit a0668cdc154e54bf0c85182e0535eea237d53146
>> powerpc/mm: Cleanup management of kmem_caches for pagetables
>>
>
> Ugh. Ok, it's not at all obvious how my patch could cause this bug.
> Can you send your .config?
>
Attached here is the config.
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
[-- Attachment #2: config_next1104 --]
[-- Type: text/plain, Size: 77335 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc6
# Wed Nov 4 11:52:00 2009
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
CONFIG_TUNE_CELL=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_IRQ_PER_CPU=y
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLQB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_PSERIES_MSI=y
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=y
# CONFIG_DTL is not set
# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
CONFIG_PS3_ADVANCED=y
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=m
CONFIG_PS3_DISK=m
CONFIG_PS3_ROM=m
CONFIG_PS3_FLASH=m
# CONFIG_PS3_VRAM is not set
CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_CELL_QPACE is not set
CONFIG_AXON_MSI=y
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_PPC_IBM_CELL_RESETBUTTON=y
CONFIG_PPC_IBM_CELL_POWERBUTTON=m
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
# CONFIG_CBE_CPUFREQ_PMI_ENABLE is not set
CONFIG_PPC_PMI=m
CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
# CONFIG_SWIOTLB is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_4K_PAGES is not set
# CONFIG_PPC_16K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=y
CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_OF_MDIO=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=123456
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_HWLAT_DETECTOR=m
CONFIG_PHANTOM=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_ISL29003 is not set
CONFIG_DS1682=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_CXGB3_ISCSI=m
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVSCSIS=m
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_IBMVFC_TRACE=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_SMU=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
CONFIG_WINDFARM_PM121=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_HP100 is not set
CONFIG_IBMVETH=m
# CONFIG_IBM_NEW_EMAC is not set
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R6040=m
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=m
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
# CONFIG_SKGE is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_CNIC is not set
CONFIG_SPIDER_NET=m
CONFIG_GELIC_NET=m
CONFIG_GELIC_WIRELESS=y
# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
CONFIG_EHEA=m
# CONFIG_ENIC is not set
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
# CONFIG_QLGE is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
# CONFIG_BE2NET is not set
CONFIG_TR=y
CONFIG_IBMOL=m
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI_PCI=m
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
# CONFIG_MISDN_HFCUSB is not set
# CONFIG_MISDN_AVMFRITZ is not set
# CONFIG_MISDN_SPEEDFAX is not set
# CONFIG_MISDN_INFINEON is not set
# CONFIG_MISDN_W6692 is not set
# CONFIG_MISDN_NETJET is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
CONFIG_VIRTIO_CONSOLE=m
CONFIG_HVCS=m
CONFIG_IBM_BSR=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_XILINX is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ALIM7101_WDT=m
CONFIG_WATCHDOG_RTAS=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=m
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
CONFIG_AB4500_CORE=y
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_PS3=y
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_FB_LOGO_EXTRA=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
CONFIG_SND_AW2=m
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_HIFIER=m
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_PS3=m
CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_GPIO_OF=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_EHCA=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_CELL=m
# CONFIG_EDAC_AMD8131 is not set
# CONFIG_EDAC_AMD8111 is not set
# CONFIG_EDAC_CPC925 is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
# CONFIG_SHM_SIGNAL is not set
# CONFIG_IOQ is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_LKDTM=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
# CONFIG_KGDB_TESTS is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_HCALL_STATS is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
^ permalink raw reply
* RE: [PATCH 1/3] fsl_pq_mdio: Fix compiler/sparse warnings (part 1)
From: Kumar Gopalpet-B05799 @ 2009-11-05 5:01 UTC (permalink / raw)
To: Anton Vorontsov; +Cc: netdev, Fleming Andy-AFLEMING, David Miller, linuxppc-dev
In-Reply-To: <20091104225256.GA29537@oksana.dev.rtsoft.ru>
=20
>-----Original Message-----
>From: Anton Vorontsov [mailto:avorontsov@ru.mvista.com]=20
>Sent: Thursday, November 05, 2009 4:23 AM
>To: David Miller
>Cc: Fleming Andy-AFLEMING; Kumar Gopalpet-B05799;=20
>netdev@vger.kernel.org; linuxppc-dev@ozlabs.org
>Subject: [PATCH 1/3] fsl_pq_mdio: Fix compiler/sparse warnings (part 1)
>
>commit 1d2397d742b7a2b39b2f09dd9da3b9d1463f55e9 ("fsl_pq_mdio:=20
>Add Suport for etsec2.0 devices") introduced the following warnings:
>
> CHECK fsl_pq_mdio.c
>fsl_pq_mdio.c:287:22: warning: incorrect type in initializer=20
>(different base types)
>fsl_pq_mdio.c:287:22: expected unknown type 11 const *__mptr
>fsl_pq_mdio.c:287:22: got unsigned long long [unsigned]=20
>[assigned] [usertype] addr
>fsl_pq_mdio.c:287:19: warning: incorrect type in assignment=20
>(different base types)
>fsl_pq_mdio.c:287:19: expected unsigned long long=20
>[unsigned] [usertype] ioremap_miimcfg
>fsl_pq_mdio.c:287:19: got struct fsl_pq_mdio *<noident>
> CC fsl_pq_mdio.o
>fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe':
>fsl_pq_mdio.c:287: warning: initialization makes pointer from=20
>integer without a cast
>fsl_pq_mdio.c:287: warning: assignment makes integer from=20
>pointer without a cast
>
>These warnings are not easy to fix without ugly __force casts.=20
>So, instead of introducing the casts, rework the code to=20
>substitute an offset from an already mapped area. This makes=20
>the code a lot simpler and less duplicated.
>
>Plus, from now on we don't actually map reserved registers on=20
>non-etsec2.0 devices, so we have more chances to catch=20
>programming errors.
>
>Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
>---
> drivers/net/fsl_pq_mdio.c | 31 ++++++++++++-------------------
> 1 files changed, 12 insertions(+), 19 deletions(-)
>
>diff --git a/drivers/net/fsl_pq_mdio.c=20
>b/drivers/net/fsl_pq_mdio.c index 4065b7c..fb8c8d9 100644
>--- a/drivers/net/fsl_pq_mdio.c
>+++ b/drivers/net/fsl_pq_mdio.c
>@@ -262,10 +262,11 @@ static int fsl_pq_mdio_probe(struct=20
>of_device *ofdev,
> struct device_node *np =3D ofdev->node;
> struct device_node *tbi;
> struct fsl_pq_mdio __iomem *regs =3D NULL;
>+ void __iomem *map;
> u32 __iomem *tbipa;
> struct mii_bus *new_bus;
> int tbiaddr =3D -1;
>- u64 addr =3D 0, size =3D 0, ioremap_miimcfg =3D 0;
>+ u64 addr =3D 0, size =3D 0;
> int err =3D 0;
>=20
> new_bus =3D mdiobus_alloc();
>@@ -279,28 +280,20 @@ static int fsl_pq_mdio_probe(struct=20
>of_device *ofdev,
> fsl_pq_mdio_bus_name(new_bus->id, np);
>=20
> /* Set the PHY base address */
>- if (of_device_is_compatible(np,"fsl,gianfar-mdio") ||
>- of_device_is_compatible(np, "fsl,gianfar-tbi") ||
>- of_device_is_compatible(np, "fsl,ucc-mdio") ||
>- of_device_is_compatible(np,"ucc_geth_phy" )) {
>- addr =3D of_translate_address(np,=20
>of_get_address(np, 0, &size, NULL));
>- ioremap_miimcfg =3D container_of(addr, struct=20
>fsl_pq_mdio, miimcfg);
>- regs =3D ioremap(ioremap_miimcfg, size +
>- offsetof(struct fsl_pq_mdio, miimcfg));
>- } else if (of_device_is_compatible(np,"fsl,etsec2-mdio") ||
>- of_device_is_compatible(np, "fsl,etsec2-tbi")) {
>- addr =3D of_translate_address(np,=20
>of_get_address(np, 0, &size, NULL));
>- regs =3D ioremap(addr, size);
>- } else {
>- err =3D -EINVAL;
>- goto err_free_bus;
>- }
>-
>- if (NULL =3D=3D regs) {
>+ addr =3D of_translate_address(np, of_get_address(np, 0,=20
>&size, NULL));
>+ map =3D ioremap(addr, size);
>+ if (!map) {
> err =3D -ENOMEM;
> goto err_free_bus;
> }
>=20
>+ if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
>+ of_device_is_compatible(np,=20
>"fsl,gianfar-tbi") ||
>+ of_device_is_compatible(np, "fsl,ucc-mdio") ||
>+ of_device_is_compatible(np, "ucc_geth_phy"))
>+ map -=3D offsetof(struct fsl_pq_mdio, miimcfg);
>+ regs =3D map;
>+
> new_bus->priv =3D (void __force *)regs;
>=20
> new_bus->irq =3D kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
>--
HI Anton, thanks for the changes. I have only one concern, has this code
been tried for ucc_geth ? I remember I had some issues with getting the
ucc_geth mdio also working. I will take in these changes and try at my
end for ucc_geth.
-Thanks
Sandeep=20
^ permalink raw reply
* Re: [PATCH] powerpc/mm: Remove debug context clamping from nohash code
From: Kumar Gala @ 2009-11-05 5:16 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1257377992.13611.77.camel@pasglop>
On Nov 4, 2009, at 5:39 PM, Benjamin Herrenschmidt wrote:
> I inadvertently left that debug code enabled, causing the number of
> contexts to be clamped to 31 which is going to slow things down on
> 4xx and just plain breaks 8xx
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
> arch/powerpc/mm/mmu_context_nohash.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/
> mmu_context_nohash.c
> index c2f93dc..be4f34c 100644
> --- a/arch/powerpc/mm/mmu_context_nohash.c
> +++ b/arch/powerpc/mm/mmu_context_nohash.c
> @@ -25,8 +25,8 @@
> * also clear mm->cpu_vm_mask bits when processes are migrated
> */
>
> -#define DEBUG_MAP_CONSISTENCY
> -#define DEBUG_CLAMP_LAST_CONTEXT 31
> +//#define DEBUG_MAP_CONSISTENCY
> +//#define DEBUG_CLAMP_LAST_CONTEXT 31
> //#define DEBUG_HARDER
>
> /* We don't use DEBUG because it tends to be compiled in always
> nowadays
Can you send this to stable.
- k
^ permalink raw reply
* Re: [PATCH] powerpc/mm: Remove debug context clamping from nohash code
From: Benjamin Herrenschmidt @ 2009-11-05 5:21 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
In-Reply-To: <6BAA37ED-F9DB-43A6-867B-B63D65926185@kernel.crashing.org>
On Wed, 2009-11-04 at 23:16 -0600, Kumar Gala wrote:
> On Nov 4, 2009, at 5:39 PM, Benjamin Herrenschmidt wrote:
>
> > I inadvertently left that debug code enabled, causing the number of
> > contexts to be clamped to 31 which is going to slow things down on
> > 4xx and just plain breaks 8xx
> >
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> > arch/powerpc/mm/mmu_context_nohash.c | 4 ++--
> > 1 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/
> > mmu_context_nohash.c
> > index c2f93dc..be4f34c 100644
> > --- a/arch/powerpc/mm/mmu_context_nohash.c
> > +++ b/arch/powerpc/mm/mmu_context_nohash.c
> > @@ -25,8 +25,8 @@
> > * also clear mm->cpu_vm_mask bits when processes are migrated
> > */
> >
> > -#define DEBUG_MAP_CONSISTENCY
> > -#define DEBUG_CLAMP_LAST_CONTEXT 31
> > +//#define DEBUG_MAP_CONSISTENCY
> > +//#define DEBUG_CLAMP_LAST_CONTEXT 31
> > //#define DEBUG_HARDER
> >
> > /* We don't use DEBUG because it tends to be compiled in always
> > nowadays
>
> Can you send this to stable.
No need. .31 doesn't have the clamp, it went in afterward afaik
(my bad) though stable does have DEBUG_MAP_CONSISTENCY which you
may want to remove for perfs.
Cheers,
Ben.
^ permalink raw reply
* RE: [PATCH 1/3] fsl_pq_mdio: Fix compiler/sparse warnings (part 1)
From: Kumar Gopalpet-B05799 @ 2009-11-05 5:41 UTC (permalink / raw)
To: Kumar Gopalpet-B05799, Anton Vorontsov
Cc: netdev, Fleming Andy-AFLEMING, David Miller, linuxppc-dev
In-Reply-To: <20091104225256.GA29537@oksana.dev.rtsoft.ru>
=20
>-----Original Message-----
>From: Kumar Gopalpet-B05799=20
>Sent: Thursday, November 05, 2009 10:31 AM
>To: 'Anton Vorontsov'
>Cc: Fleming Andy-AFLEMING; netdev@vger.kernel.org;=20
>linuxppc-dev@ozlabs.org; David Miller
>Subject: RE: [PATCH 1/3] fsl_pq_mdio: Fix compiler/sparse=20
>warnings (part 1)
>
>=20
>
>>-----Original Message-----
>>From: Anton Vorontsov [mailto:avorontsov@ru.mvista.com]
>>Sent: Thursday, November 05, 2009 4:23 AM
>>To: David Miller
>>Cc: Fleming Andy-AFLEMING; Kumar Gopalpet-B05799;=20
>>netdev@vger.kernel.org; linuxppc-dev@ozlabs.org
>>Subject: [PATCH 1/3] fsl_pq_mdio: Fix compiler/sparse=20
>warnings (part 1)
>>
>>commit 1d2397d742b7a2b39b2f09dd9da3b9d1463f55e9 ("fsl_pq_mdio:=20
>>Add Suport for etsec2.0 devices") introduced the following warnings:
>>
>> CHECK fsl_pq_mdio.c
>>fsl_pq_mdio.c:287:22: warning: incorrect type in initializer=20
>(different=20
>>base types)
>>fsl_pq_mdio.c:287:22: expected unknown type 11 const *__mptr
>>fsl_pq_mdio.c:287:22: got unsigned long long [unsigned]=20
>>[assigned] [usertype] addr
>>fsl_pq_mdio.c:287:19: warning: incorrect type in assignment=20
>(different=20
>>base types)
>>fsl_pq_mdio.c:287:19: expected unsigned long long=20
>>[unsigned] [usertype] ioremap_miimcfg
>>fsl_pq_mdio.c:287:19: got struct fsl_pq_mdio *<noident>
>> CC fsl_pq_mdio.o
>>fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe':
>>fsl_pq_mdio.c:287: warning: initialization makes pointer from integer=20
>>without a cast
>>fsl_pq_mdio.c:287: warning: assignment makes integer from pointer=20
>>without a cast
>>
>>These warnings are not easy to fix without ugly __force casts.=20
>>So, instead of introducing the casts, rework the code to=20
>substitute an=20
>>offset from an already mapped area. This makes the code a lot simpler=20
>>and less duplicated.
>>
>>Plus, from now on we don't actually map reserved registers on=20
>>non-etsec2.0 devices, so we have more chances to catch programming=20
>>errors.
>>
>>Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
>>---
>> drivers/net/fsl_pq_mdio.c | 31 ++++++++++++-------------------
>> 1 files changed, 12 insertions(+), 19 deletions(-)
>>
>>diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c=20
>>index 4065b7c..fb8c8d9 100644
>>--- a/drivers/net/fsl_pq_mdio.c
>>+++ b/drivers/net/fsl_pq_mdio.c
>>@@ -262,10 +262,11 @@ static int fsl_pq_mdio_probe(struct of_device=20
>>*ofdev,
>> struct device_node *np =3D ofdev->node;
>> struct device_node *tbi;
>> struct fsl_pq_mdio __iomem *regs =3D NULL;
>>+ void __iomem *map;
>> u32 __iomem *tbipa;
>> struct mii_bus *new_bus;
>> int tbiaddr =3D -1;
>>- u64 addr =3D 0, size =3D 0, ioremap_miimcfg =3D 0;
>>+ u64 addr =3D 0, size =3D 0;
>> int err =3D 0;
>>=20
>> new_bus =3D mdiobus_alloc();
>>@@ -279,28 +280,20 @@ static int fsl_pq_mdio_probe(struct of_device=20
>>*ofdev,
>> fsl_pq_mdio_bus_name(new_bus->id, np);
>>=20
>> /* Set the PHY base address */
>>- if (of_device_is_compatible(np,"fsl,gianfar-mdio") ||
>>- of_device_is_compatible(np, "fsl,gianfar-tbi") ||
>>- of_device_is_compatible(np, "fsl,ucc-mdio") ||
>>- of_device_is_compatible(np,"ucc_geth_phy" )) {
>>- addr =3D of_translate_address(np,=20
>>of_get_address(np, 0, &size, NULL));
>>- ioremap_miimcfg =3D container_of(addr, struct=20
>>fsl_pq_mdio, miimcfg);
>>- regs =3D ioremap(ioremap_miimcfg, size +
>>- offsetof(struct fsl_pq_mdio, miimcfg));
>>- } else if (of_device_is_compatible(np,"fsl,etsec2-mdio") ||
>>- of_device_is_compatible(np, "fsl,etsec2-tbi")) {
>>- addr =3D of_translate_address(np,=20
>>of_get_address(np, 0, &size, NULL));
>>- regs =3D ioremap(addr, size);
>>- } else {
>>- err =3D -EINVAL;
>>- goto err_free_bus;
>>- }
>>-
>>- if (NULL =3D=3D regs) {
>>+ addr =3D of_translate_address(np, of_get_address(np, 0,
>>&size, NULL));
>>+ map =3D ioremap(addr, size);
>>+ if (!map) {
>> err =3D -ENOMEM;
>> goto err_free_bus;
>> }
>>=20
>>+ if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
>>+ of_device_is_compatible(np,
>>"fsl,gianfar-tbi") ||
>>+ of_device_is_compatible(np, "fsl,ucc-mdio") ||
>>+ of_device_is_compatible(np, "ucc_geth_phy"))
>>+ map -=3D offsetof(struct fsl_pq_mdio, miimcfg);
>>+ regs =3D map;
>>+
>> new_bus->priv =3D (void __force *)regs;
>>=20
>> new_bus->irq =3D kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
>>--
>
>HI Anton, thanks for the changes. I have only one concern, has=20
>this code been tried for ucc_geth ? I remember I had some=20
>issues with getting the ucc_geth mdio also working. I will=20
>take in these changes and try at my end for ucc_geth.
Sorry, if my earlier statement was confusing. What I meant was with
similar changes as Anton's changes
I had some issues with ucc_geth mdio ( may be Anton's changes don't have
that issue).
--
Thanks
Sandeep
^ permalink raw reply
* Re: [PATCH] PCI: Fix regression in powerpc MSI-X
From: Benjamin Herrenschmidt @ 2009-11-05 5:43 UTC (permalink / raw)
To: Andre Detsch; +Cc: linuxppc-dev
In-Reply-To: <200911041303.19695.adetsch@br.ibm.com>
On Wed, 2009-11-04 at 13:03 -0200, Andre Detsch wrote:
> Patch f598282f5145036312d90875d0ed5c14b49fd8a7 exposed a problem in
> powerpc MSI-X functionality, making network interfaces such as ixgbe
> and cxgb3 stop to work when MSI-X is enabled. RX interrupts were not
> being generated.
>
> The problem was caused because MSI irq was not being effectively
> unmasked after device initialization.
Patch is wrapped...
Ben.
> Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
>
> Index: linux-2.6/arch/powerpc/platforms/pseries/msi.c
> ===================================================================
> --- linux-2.6.orig/arch/powerpc/platforms/pseries/msi.c 2009-11-04
> 06:35:39.000000000 -0700
> +++ linux-2.6/arch/powerpc/platforms/pseries/msi.c 2009-11-04
> 07:23:27.000000000 -0700
> @@ -432,8 +432,6 @@ static int rtas_setup_msi_irqs(struct pc
> /* Read config space back so we can restore after reset */
> read_msi_msg(virq, &msg);
> entry->msg = msg;
> -
> - unmask_msi_irq(virq);
> }
>
> return 0;
> Index: linux-2.6/arch/powerpc/platforms/pseries/xics.c
> ===================================================================
> --- linux-2.6.orig/arch/powerpc/platforms/pseries/xics.c 2009-11-04
> 06:35:39.000000000 -0700
> +++ linux-2.6/arch/powerpc/platforms/pseries/xics.c 2009-11-04
> 07:23:27.000000000 -0700
> @@ -18,6 +18,7 @@
> #include <linux/init.h>
> #include <linux/radix-tree.h>
> #include <linux/cpu.h>
> +#include <linux/msi.h>
> #include <linux/of.h>
>
> #include <asm/firmware.h>
> @@ -219,6 +220,14 @@ static void xics_unmask_irq(unsigned int
>
> static unsigned int xics_startup(unsigned int virq)
> {
> + /*
> + * The generic MSI code returns with the interrupt disabled on the
> + * card, using the MSI mask bits. Firmware doesn't appear to unmask
> + * at that level, so we do it here by hand.
> + */
> + if (irq_to_desc(virq)->msi_desc)
> + unmask_msi_irq(virq);
> +
> /* unmask it */
> xics_unmask_irq(virq);
> return 0;
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH] BUILD_BUG_ON: make it handle more cases
From: Benjamin Herrenschmidt @ 2009-11-05 6:01 UTC (permalink / raw)
To: Rusty Russell
Cc: sfr, Hollis Blanchard, linux-kernel, kvm-ppc, linux-next,
Jan Beulich, akpm, linuxppc-dev
In-Reply-To: <200910201415.34361.rusty@rustcorp.com.au>
On Tue, 2009-10-20 at 14:15 +1030, Rusty Russell wrote:
> BUILD_BUG_ON used to use the optimizer to do code elimination or fail
> at link time; it was changed to first the size of a negative array (a
> nicer compile time error), then (in
> 8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield.
What's the status with this patch ? The lack of it breaks my KVM stuff
in powerpc...
Cheers,
Ben.
> bitfields: needs a literal constant at parse time, and can't be put under
> "if (__builtin_constant_p(x))" for example.
> negative array: can handle anything, but if the compiler can't tell it's
> a constant, silently has no effect.
> link time: breaks link if the compiler can't determine the value, but the
> linker output is not usually as informative as a compiler error.
>
> If we use the negative-array-size method *and* the link time trick,
> we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
> branches, and maximal ability for the compiler to detect errors at
> build time.
>
> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
>
> diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> --- a/include/linux/kernel.h
> +++ b/include/linux/kernel.h
> @@ -683,12 +683,6 @@ struct sysinfo {
> char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */
> };
>
> -/* Force a compilation error if condition is true */
> -#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition))
> -
> -/* Force a compilation error if condition is constant and true */
> -#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
> -
> /* Force a compilation error if condition is true, but also produce a
> result (of value 0 and type size_t), so the expression can be used
> e.g. in a structure initializer (or where-ever else comma expressions
> @@ -696,6 +690,33 @@ struct sysinfo {
> #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
> #define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
>
> +/**
> + * BUILD_BUG_ON - break compile if a condition is true.
> + * @cond: the condition which the compiler should know is false.
> + *
> + * If you have some code which relies on certain constants being equal, or
> + * other compile-time-evaluated condition, you should use BUILD_BUG_ON to
> + * detect if someone changes it.
> + *
> + * The implementation uses gcc's reluctance to create a negative array, but
> + * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments
> + * to inline functions). So as a fallback we use the optimizer; if it can't
> + * prove the condition is false, it will cause a link error on the undefined
> + * "__build_bug_on_failed". This error message can be harder to track down
> + * though, hence the two different methods.
> + */
> +#ifndef __OPTIMIZE__
> +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
> +#else
> +extern int __build_bug_on_failed;
> +#define BUILD_BUG_ON(condition) \
> + do { \
> + ((void)sizeof(char[1 - 2*!!(condition)])); \
> + if (condition) __build_bug_on_failed = 1; \
> + } while(0)
> +#endif
> +#define MAYBE_BUILD_BUG_ON(condition) BUILD_BUG_ON(condition)
> +
> /* Trap pasters of __FUNCTION__ at compile-time */
> #define __FUNCTION__ (__func__)
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH 00/27] Add KVM support for Book3s_64 (PPC64) hosts v6
From: Benjamin Herrenschmidt @ 2009-11-05 6:03 UTC (permalink / raw)
To: Alexander Graf
Cc: Kevin Wolf, Arnd Bergmann, Hollis Blanchard, Marcelo Tosatti,
kvm-ppc, linuxppc-dev, Avi Kivity, kvm, bphilips, Olof Johansson
In-Reply-To: <1256917647-6200-1-git-send-email-agraf@suse.de>
On Fri, 2009-10-30 at 16:47 +0100, Alexander Graf wrote:
> KVM for PowerPC only supports embedded cores at the moment.
>
> While it makes sense to virtualize on small machines, it's even more fun
> to do so on big boxes. So I figured we need KVM for PowerPC64 as well.
I get that with exit timing enabled:
arch/powerpc/kvm/timing.c:205: error: ‘THIS_MODULE’ undeclared here (not in a function)
I'll stick a fixup patch in my tree (just adding #include <linux/module.h>)
Cheers,
Ben.
^ permalink raw reply
* 2.6.33 -next tree
From: Grant Likely @ 2009-11-05 6:10 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Andrew Morton, linuxppc-dev; +Cc: David Brownell
Hi Ben, Stephen.
I just prepared my next branch for 2.6.33:
git://git.secretlab.ca/git/linux-2.6 next
Steven, can you please add this tree to your linux-next pull list?
This is the branch where I put stuff that gets fed up to Ben. This is
separate from the branch that I'm using to collect OF related changes
and that you are already pulling in.
Ben, can you please pull this branch into your -next tree for 2.6.33?
Andrew & David, you'll notice that I've also got some SPI and MMC
changes in this branch (PPC and OF related stuff) since there is no
current MMC maintainer, and some of these SPI patches have been
hanging around for a while now. Let me know if you object to me
pushing these changes personally instead of going through another
maintainer.
Thanks,
g.
The following changes since commit b419148e567728f6af0c3b01965c1cc141e3e13a=
:
Linus Torvalds (1):
Linux 2.6.32-rc6
are available in the git repository at:
git://git.secretlab.ca/git/linux-2.6 next
Albrecht Dre=DF (1):
powerpc: tiny memcpy_(to|from)io optimisation
Grant Likely (4):
spi/mpc5200: Register SPI devices described in device tree
powerpc/5200: Add mpc5200-spi (non-PSC) device driver
powerpc/5200: add general purpose timer API for the MPC5200
mmc: fix missing module license declaration in of_mmc_spi.c
John Bonesio (1):
powerpc/5200: add LocalPlus bus FIFO device driver
John Linn (1):
Xilinx: SPI: Fix bits_per_word for transfers
Wolfram Sang (2):
spi/mpc52xx-psc-spi: check for valid PSC
spi/mpc52xx: replace printk with dev_err
arch/powerpc/include/asm/mpc52xx.h | 46 ++
arch/powerpc/kernel/io.c | 4 +-
arch/powerpc/platforms/52xx/Kconfig | 5 +
arch/powerpc/platforms/52xx/Makefile | 1 +
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 133 ++++++-
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 560 +++++++++++++++++++++=
++++
drivers/mmc/host/of_mmc_spi.c | 2 +
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/mpc52xx_psc_spi.c | 25 +-
drivers/spi/mpc52xx_spi.c | 520 +++++++++++++++++++++=
++
drivers/spi/xilinx_spi.c | 3 +-
include/linux/spi/mpc52xx_spi.h | 10 +
13 files changed, 1297 insertions(+), 21 deletions(-)
create mode 100644 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
create mode 100644 drivers/spi/mpc52xx_spi.c
create mode 100644 include/linux/spi/mpc52xx_spi.h
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH] powerpc/kvm: Remove problematic BUILD_BUG_ON statement
From: Benjamin Herrenschmidt @ 2009-11-05 6:12 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Hollis Blanchard, kvm-ppc
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
I'm going to stick this into my -merge branch and send it to Linus today
until we fix it for real
diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h
index bb13b1f..806ef67 100644
--- a/arch/powerpc/kvm/timing.h
+++ b/arch/powerpc/kvm/timing.h
@@ -48,7 +48,11 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {}
static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
{
/* type has to be known at build time for optimization */
+
+ /* The BUILD_BUG_ON below breaks in funny ways, commented out
+ * for now ... -BenH
BUILD_BUG_ON(__builtin_constant_p(type));
+ */
switch (type) {
case EXT_INTR_EXITS:
vcpu->stat.ext_intr_exits++;
^ permalink raw reply related
* [PATCH] powerpc/kvm: Fix non-modular build
From: Benjamin Herrenschmidt @ 2009-11-05 6:18 UTC (permalink / raw)
To: kvmppc, linuxppc-dev; +Cc: Hollis Blanchard
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/kvm/timing.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 2aa371e..7037855 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -23,6 +23,7 @@
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/time.h>
#include <asm-generic/div64.h>
^ permalink raw reply related
* Re: [PATCH] BUILD_BUG_ON: make it handle more cases
From: Rusty Russell @ 2009-11-05 6:28 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Hollis Blanchard, linux-kernel, kvm-ppc, linux-next, Jan Beulich,
akpm, linuxppc-dev
In-Reply-To: <20091105112020.33f02552.sfr@canb.auug.org.au>
On Thu, 5 Nov 2009 10:50:20 am Stephen Rothwell wrote:
> Hi Rusty,
>
> On Tue, 20 Oct 2009 14:15:33 +1030 Rusty Russell <rusty@rustcorp.com.au> wrote:
> >
> > +#ifndef __OPTIMIZE__
> > +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
> > +#else
> > +extern int __build_bug_on_failed;
> > +#define BUILD_BUG_ON(condition) \
> > + do { \
> > + ((void)sizeof(char[1 - 2*!!(condition)])); \
> > + if (condition) __build_bug_on_failed = 1; \
> > + } while(0)
> > +#endif
> > +#define MAYBE_BUILD_BUG_ON(condition) BUILD_BUG_ON(condition)
> > +
>
> I decided to try this in linux-next, but an x86_64 allmodconfig build
> gave this (gcc 4.4.0):
>
> ERROR: "__build_bug_on_failed" [drivers/net/virtio_net.ko] undefined!
> ERROR: "__build_bug_on_failed" [drivers/block/virtio_blk.ko] undefined!
>
> I assume that this is caused by the "MAYBE_BUILD_BUG_ON(fbit >= 32)" in
> virtio_has_feature() (in include/linux/virtio_config.h) which is called
> all over the place. Unfortunately, virtio_has_feature() gets uninlined
> in those two files ...
Huh? virtio_has_feature does:
if (__builtin_constant_p(fbit))
BUILD_BUG_ON(fbit >= 32);
else
BUG_ON(fbit >= 32);
So, if it's not a constant, gcc should throw away that first branch. If it
is, it should optimize it away (and no, these are not real bugs AFAICT).
I did a 4.3.3 allmodconfig with this patch on 64-bit a few days back and all
was fine. Will try 4.4.0 now.
Thanks,
Rusty.
^ permalink raw reply
* Re: [PATCH] BUILD_BUG_ON: make it handle more cases
From: Rusty Russell @ 2009-11-05 6:37 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Hollis Blanchard, linux-kernel, kvm-ppc, linux-next, Jan Beulich,
akpm, linuxppc-dev
In-Reply-To: <200911051658.36265.rusty@rustcorp.com.au>
On Thu, 5 Nov 2009 04:58:36 pm Rusty Russell wrote:
> I did a 4.3.3 allmodconfig with this patch on 64-bit a few days back and all
> was fine. Will try 4.4.0 now.
4.4.1 seems OK (Ubuntu).
This is annoying. But I'll withdraw the patches; if there's another reason
that 4.4.0 is bad, we can ban it and reintroduce this. I don't think that
breaking this hack is enough to declare 4.4.0 verboten.
Thanks,
Rusty.
^ permalink raw reply
* Re: [PATCH] BUILD_BUG_ON: make it handle more cases
From: Stephen Rothwell @ 2009-11-05 6:38 UTC (permalink / raw)
To: Rusty Russell
Cc: Hollis Blanchard, linux-kernel, kvm-ppc, linux-next, Jan Beulich,
akpm, linuxppc-dev
In-Reply-To: <200911051658.36265.rusty@rustcorp.com.au>
[-- Attachment #1: Type: text/plain, Size: 1149 bytes --]
Hi Rusty,
On Thu, 5 Nov 2009 16:58:36 +1030 Rusty Russell <rusty@rustcorp.com.au> wrote:
>
> Huh? virtio_has_feature does:
>
> if (__builtin_constant_p(fbit))
> BUILD_BUG_ON(fbit >= 32);
> else
> BUG_ON(fbit >= 32);
In Linus' tree (and linux-next) it looks like this:
static inline bool virtio_has_feature(const struct virtio_device *vdev,
unsigned int fbit)
{
/* Did you forget to fix assumptions on max features? */
MAYBE_BUILD_BUG_ON(fbit >= 32);
if (fbit < VIRTIO_TRANSPORT_F_START)
virtio_check_driver_offered_feature(vdev, fbit);
return test_bit(fbit, vdev->features);
}
> So, if it's not a constant, gcc should throw away that first branch. If it
> is, it should optimize it away (and no, these are not real bugs AFAICT).
Your version above may well fix the problem. Alternatively marking it
__always_inline way work as well.
> I did a 4.3.3 allmodconfig with this patch on 64-bit a few days back and all
> was fine. Will try 4.4.0 now.
4.4 is more problematic.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply
* [git pull] Please pull powerpc.git merge branch
From: Benjamin Herrenschmidt @ 2009-11-05 7:07 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, linuxppc-dev list, Linux Kernel list
Hi Linus !
Here are some small bits for .32
The Kconfig cleanup you asked for hugetlbfs selection, a few regression
fixes and an actual bug fix that I decided was worth putting in now
(the RTC dates thingy)
Cheers,
Ben.
The following changes since commit 2e2ec952350f25242f2e0539db16b1e46f9eb01b:
Linus Torvalds (1):
Merge branch 'bugfix' of git://git.kernel.org/.../jeremy/xen
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git merge
Andre Detsch (1):
powerpc/pci: Fix regression in powerpc MSI-X
Benjamin Herrenschmidt (4):
powerpc: Cleanup Kconfig selection of hugetlbfs support
powerpc/mm: Remove debug context clamping from nohash code
powerpc: Avoid giving out RTC dates below EPOCH
powerpc/kvm: Remove problematic BUILD_BUG_ON statement
arch/powerpc/Kconfig | 4 ++++
arch/powerpc/kernel/time.c | 15 ++++++++++++++-
arch/powerpc/kvm/timing.h | 4 ++++
arch/powerpc/mm/mmu_context_nohash.c | 4 ++--
arch/powerpc/platforms/pseries/msi.c | 2 --
arch/powerpc/platforms/pseries/xics.c | 9 +++++++++
fs/Kconfig | 2 +-
7 files changed, 34 insertions(+), 6 deletions(-)
^ permalink raw reply
* [PATCH 00/11] More OF merge patches
From: Grant Likely @ 2009-11-05 7:45 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
Round 2. Here is my 2nd set of merging OF code between PowerPC and
Microblaze (no SPARC changes this time). Compile tested on ppc,
microblaze and sparc. Boot tested on MPC5200 powerpc platform.
I've also pushed this series out to the test-devicetree branch on my
git server if anyone cares to pull and test:
git://git.secretlab.ca/git/linux-2.6 test-devicetree
This is based on the next-devicetree branch which contains the first
round of patches and is being pulled into linux-next.
Cheers,
g.
---
Grant Likely (11):
of/flattree: Merge early_init_dt_check_for_initrd()
of: remove special case definition of of_read_ulong()
of: merge prom_{add,remove,modify}_property
of/flattree: Merge unflatten_device_tree
of/flattree: Merge unflatten_dt_node
of/flattree: Merge of_flat_dt_is_compatible
of/flattree: merge of_get_flat_dt_prop
of/flattree: remove __init annotations from the header file
of/flattree: merge of_get_flat_dt_root
of/flattree: merge of_scan_flat_dt
of/flattree: merge find_flat_dt_string and initial_boot_params
arch/microblaze/Kconfig | 1
arch/microblaze/include/asm/prom.h | 1
arch/microblaze/kernel/prom.c | 531 ------------------------------------
arch/powerpc/Kconfig | 1
arch/powerpc/kernel/prom.c | 534 ------------------------------------
drivers/of/Kconfig | 4
drivers/of/Makefile | 1
drivers/of/base.c | 116 ++++++++
drivers/of/fdt.c | 458 +++++++++++++++++++++++++++++++
include/linux/of.h | 10 -
include/linux/of_fdt.h | 21 +
11 files changed, 598 insertions(+), 1080 deletions(-)
create mode 100644 drivers/of/fdt.c
^ permalink raw reply
* [PATCH 01/11] of/flattree: merge find_flat_dt_string and initial_boot_params
From: Grant Likely @ 2009-11-05 7:45 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between Microblaze and PowerPC. Also move instance of
---
arch/microblaze/Kconfig | 1 +
arch/microblaze/kernel/prom.c | 8 --------
arch/powerpc/Kconfig | 1 +
arch/powerpc/kernel/prom.c | 12 ------------
drivers/of/Kconfig | 4 ++++
drivers/of/Makefile | 1 +
drivers/of/fdt.c | 21 +++++++++++++++++++++
include/linux/of_fdt.h | 4 ++++
8 files changed, 32 insertions(+), 20 deletions(-)
create mode 100644 drivers/of/fdt.c
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index bbd8327..f39c927 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -111,6 +111,7 @@ config CMDLINE_FORCE
config OF
def_bool y
+ select OF_FLATTREE
config PROC_DEVICETREE
bool "Support for device tree in /proc"
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index b817df1..06d620a 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -47,17 +47,9 @@ static int __initdata dt_root_size_cells;
typedef u32 cell_t;
-static struct boot_param_header *initial_boot_params;
-
/* export that to outside world */
struct device_node *of_chosen;
-static inline char *find_flat_dt_string(u32 offset)
-{
- return ((char *)initial_boot_params) +
- initial_boot_params->off_dt_strings + offset;
-}
-
/**
* This function is used to scan the flattened device-tree, it is
* used to extract the memory informations at boot before we can
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 10a0a54..5f6eed9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -163,6 +163,7 @@ config PPC_OF
config OF
def_bool y
+ select OF_FLATTREE
config PPC_UDBG_16550
bool
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4ec3008..fccf7e4 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -73,12 +73,6 @@ unsigned long tce_alloc_start, tce_alloc_end;
typedef u32 cell_t;
-#if 0
-static struct boot_param_header *initial_boot_params __initdata;
-#else
-struct boot_param_header *initial_boot_params;
-#endif
-
extern struct device_node *allnodes; /* temporary while merging */
extern rwlock_t devtree_lock; /* temporary while merging */
@@ -86,12 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-static inline char *find_flat_dt_string(u32 offset)
-{
- return ((char *)initial_boot_params) +
- initial_boot_params->off_dt_strings + offset;
-}
-
/**
* This function is used to scan the flattened device-tree, it is
* used to extract the memory informations at boot before we can
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d2fa27c..462825e 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,3 +1,7 @@
+config OF_FLATTREE
+ bool
+ depends on OF
+
config OF_DEVICE
def_bool y
depends on OF && (SPARC || PPC_OF || MICROBLAZE)
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index bdfb5f5..f232cc9 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,4 +1,5 @@
obj-y = base.o
+obj-$(CONFIG_OF_FLATTREE) += fdt.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
obj-$(CONFIG_OF_GPIO) += gpio.o
obj-$(CONFIG_OF_I2C) += of_i2c.o
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
new file mode 100644
index 0000000..9faa9a5
--- /dev/null
+++ b/drivers/of/fdt.c
@@ -0,0 +1,21 @@
+/*
+ * Functions for working with the Flattened Device Tree data format
+ *
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+
+struct boot_param_header *initial_boot_params;
+
+char *find_flat_dt_string(u32 offset)
+{
+ return ((char *)initial_boot_params) +
+ initial_boot_params->off_dt_strings + offset;
+}
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 41d432b..d1a79f3 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -57,7 +57,11 @@ struct boot_param_header {
u32 dt_struct_size; /* size of the DT structure block */
};
+/* TBD: Temporary export of fdt globals - remove when code fully merged */
+extern struct boot_param_header *initial_boot_params;
+
/* For scanning the flat device-tree at boot time */
+extern char *find_flat_dt_string(u32 offset);
extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
const char *uname, int depth,
void *data),
^ permalink raw reply related
* [PATCH 02/11] of/flattree: merge of_scan_flat_dt
From: Grant Likely @ 2009-11-05 7:45 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and Microblaze
---
arch/microblaze/kernel/prom.c | 61 --------------------------------------
arch/powerpc/kernel/prom.c | 61 --------------------------------------
drivers/of/fdt.c | 65 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 122 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 06d620a..0db8ee6 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,67 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- int rc = 0;
- int depth = -1;
-
- do {
- u32 tag = *((u32 *)p);
- char *pathp;
-
- p += 4;
- if (tag == OF_DT_END_NODE) {
- depth--;
- continue;
- }
- if (tag == OF_DT_NOP)
- continue;
- if (tag == OF_DT_END)
- break;
- if (tag == OF_DT_PROP) {
- u32 sz = *((u32 *)p);
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
- p += sz;
- p = _ALIGN(p, 4);
- continue;
- }
- if (tag != OF_DT_BEGIN_NODE) {
- printk(KERN_WARNING "Invalid tag %x scanning flattened"
- " device tree !\n", tag);
- return -EINVAL;
- }
- depth++;
- pathp = (char *)p;
- p = _ALIGN(p + strlen(pathp) + 1, 4);
- if ((*pathp) == '/') {
- char *lp, *np;
- for (lp = NULL, np = pathp; *np; np++)
- if ((*np) == '/')
- lp = np+1;
- if (lp != NULL)
- pathp = lp;
- }
- rc = it(p, pathp, depth, data);
- if (rc != 0)
- break;
- } while (1);
-
- return rc;
-}
-
unsigned long __init of_get_flat_dt_root(void)
{
unsigned long p = ((unsigned long)initial_boot_params) +
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fccf7e4..14a07b9 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -80,67 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- int rc = 0;
- int depth = -1;
-
- do {
- u32 tag = *((u32 *)p);
- char *pathp;
-
- p += 4;
- if (tag == OF_DT_END_NODE) {
- depth --;
- continue;
- }
- if (tag == OF_DT_NOP)
- continue;
- if (tag == OF_DT_END)
- break;
- if (tag == OF_DT_PROP) {
- u32 sz = *((u32 *)p);
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
- p += sz;
- p = _ALIGN(p, 4);
- continue;
- }
- if (tag != OF_DT_BEGIN_NODE) {
- printk(KERN_WARNING "Invalid tag %x scanning flattened"
- " device tree !\n", tag);
- return -EINVAL;
- }
- depth++;
- pathp = (char *)p;
- p = _ALIGN(p + strlen(pathp) + 1, 4);
- if ((*pathp) == '/') {
- char *lp, *np;
- for (lp = NULL, np = pathp; *np; np++)
- if ((*np) == '/')
- lp = np+1;
- if (lp != NULL)
- pathp = lp;
- }
- rc = it(p, pathp, depth, data);
- if (rc != 0)
- break;
- } while(1);
-
- return rc;
-}
-
unsigned long __init of_get_flat_dt_root(void)
{
unsigned long p = ((unsigned long)initial_boot_params) +
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 9faa9a5..7c3c13c 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -19,3 +19,68 @@ char *find_flat_dt_string(u32 offset)
return ((char *)initial_boot_params) +
initial_boot_params->off_dt_strings + offset;
}
+
+/**
+ * of_scan_flat_dt - scan flattend tree blob and call callback on each.
+ * @it: callback function
+ * @data: context data pointer
+ *
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory informations at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ int rc = 0;
+ int depth = -1;
+
+ do {
+ u32 tag = *((u32 *)p);
+ char *pathp;
+
+ p += 4;
+ if (tag == OF_DT_END_NODE) {
+ depth--;
+ continue;
+ }
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag == OF_DT_END)
+ break;
+ if (tag == OF_DT_PROP) {
+ u32 sz = *((u32 *)p);
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+ p += sz;
+ p = _ALIGN(p, 4);
+ continue;
+ }
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk(KERN_WARNING "Invalid tag %x scanning flattened"
+ " device tree !\n", tag);
+ return -EINVAL;
+ }
+ depth++;
+ pathp = (char *)p;
+ p = _ALIGN(p + strlen(pathp) + 1, 4);
+ if ((*pathp) == '/') {
+ char *lp, *np;
+ for (lp = NULL, np = pathp; *np; np++)
+ if ((*np) == '/')
+ lp = np+1;
+ if (lp != NULL)
+ pathp = lp;
+ }
+ rc = it(p, pathp, depth, data);
+ if (rc != 0)
+ break;
+ } while (1);
+
+ return rc;
+}
^ permalink raw reply related
* [PATCH 03/11] of/flattree: merge of_get_flat_dt_root
From: Grant Likely @ 2009-11-05 7:45 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and MicroBlaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/kernel/prom.c | 12 ------------
arch/powerpc/kernel/prom.c | 12 ------------
drivers/of/fdt.c | 16 ++++++++++++++++
3 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 0db8ee6..7eb6f8b 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,18 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-unsigned long __init of_get_flat_dt_root(void)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
-
- while (*((u32 *)p) == OF_DT_NOP)
- p += 4;
- BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
- p += 4;
- return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
/**
* This function can be used within scan_flattened_dt callback to get
* access to properties
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 14a07b9..b5d5f85 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -80,18 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-unsigned long __init of_get_flat_dt_root(void)
-{
- unsigned long p = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
-
- while(*((u32 *)p) == OF_DT_NOP)
- p += 4;
- BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
- p += 4;
- return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
/**
* This function can be used within scan_flattened_dt callback to get
* access to properties
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 7c3c13c..a6e869e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -84,3 +84,19 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
return rc;
}
+
+/**
+ * of_get_flat_dt_root - find the root node in the flat blob
+ */
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while (*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
^ permalink raw reply related
* [PATCH 04/11] of/flattree: remove __init annotations from the header file
From: Grant Likely @ 2009-11-05 7:46 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
__init annotation belongs in the .c file, not the header.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
include/linux/of_fdt.h | 16 +++++++---------
1 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index d1a79f3..81231e0 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -62,15 +62,13 @@ extern struct boot_param_header *initial_boot_params;
/* For scanning the flat device-tree at boot time */
extern char *find_flat_dt_string(u32 offset);
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data);
-extern void __init *of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node,
- const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
+extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname,
+ int depth, void *data),
+ void *data);
+extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long of_get_flat_dt_root(void);
/* Other Prototypes */
extern void finish_device_tree(void);
^ permalink raw reply related
* [PATCH 05/11] of/flattree: merge of_get_flat_dt_prop
From: Grant Likely @ 2009-11-05 7:46 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/kernel/prom.c | 42 ----------------------------------------
arch/powerpc/kernel/prom.c | 42 ----------------------------------------
drivers/of/fdt.c | 43 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 43 insertions(+), 84 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 7eb6f8b..d75c625 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,48 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size)
-{
- unsigned long p = node;
-
- do {
- u32 tag = *((u32 *)p);
- u32 sz, noff;
- const char *nstr;
-
- p += 4;
- if (tag == OF_DT_NOP)
- continue;
- if (tag != OF_DT_PROP)
- return NULL;
-
- sz = *((u32 *)p);
- noff = *((u32 *)(p + 4));
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
- nstr = find_flat_dt_string(noff);
- if (nstr == NULL) {
- printk(KERN_WARNING "Can't find property index"
- " name !\n");
- return NULL;
- }
- if (strcmp(name, nstr) == 0) {
- if (size)
- *size = sz;
- return (void *)p;
- }
- p += sz;
- p = _ALIGN(p, 4);
- } while (1);
-}
-
int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
{
const char *cp;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index b5d5f85..cd0a2bf 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -80,48 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size)
-{
- unsigned long p = node;
-
- do {
- u32 tag = *((u32 *)p);
- u32 sz, noff;
- const char *nstr;
-
- p += 4;
- if (tag == OF_DT_NOP)
- continue;
- if (tag != OF_DT_PROP)
- return NULL;
-
- sz = *((u32 *)p);
- noff = *((u32 *)(p + 4));
- p += 8;
- if (initial_boot_params->version < 0x10)
- p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
- nstr = find_flat_dt_string(noff);
- if (nstr == NULL) {
- printk(KERN_WARNING "Can't find property index"
- " name !\n");
- return NULL;
- }
- if (strcmp(name, nstr) == 0) {
- if (size)
- *size = sz;
- return (void *)p;
- }
- p += sz;
- p = _ALIGN(p, 4);
- } while(1);
-}
-
int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
{
const char* cp;
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index a6e869e..7a51343 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -100,3 +100,46 @@ unsigned long __init of_get_flat_dt_root(void)
return _ALIGN(p + strlen((char *)p) + 1, 4);
}
+/**
+ * of_get_flat_dt_prop - Given a node in the flat blob, return the property pointer
+ *
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size)
+{
+ unsigned long p = node;
+
+ do {
+ u32 tag = *((u32 *)p);
+ u32 sz, noff;
+ const char *nstr;
+
+ p += 4;
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag != OF_DT_PROP)
+ return NULL;
+
+ sz = *((u32 *)p);
+ noff = *((u32 *)(p + 4));
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+ nstr = find_flat_dt_string(noff);
+ if (nstr == NULL) {
+ pr_warning("Can't find property index name !\n");
+ return NULL;
+ }
+ if (strcmp(name, nstr) == 0) {
+ if (size)
+ *size = sz;
+ return (void *)p;
+ }
+ p += sz;
+ p = _ALIGN(p, 4);
+ } while (1);
+}
+
^ permalink raw reply related
* [PATCH 06/11] of/flattree: Merge of_flat_dt_is_compatible
From: Grant Likely @ 2009-11-05 7:46 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/kernel/prom.c | 19 -------------------
arch/powerpc/kernel/prom.c | 19 -------------------
drivers/of/fdt.c | 24 ++++++++++++++++++++++++
3 files changed, 24 insertions(+), 38 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index d75c625..eb27bd3 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,25 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
- const char *cp;
- unsigned long cplen, l;
-
- cp = of_get_flat_dt_prop(node, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncasecmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
unsigned long align)
{
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index cd0a2bf..413e608 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -80,25 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
- const char* cp;
- unsigned long cplen, l;
-
- cp = of_get_flat_dt_prop(node, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncasecmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
unsigned long align)
{
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 7a51343..01a7f5f 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -143,3 +143,27 @@ void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
} while (1);
}
+/**
+ * of_flat_dt_is_compatible - Return true if given node has compat in compatible list
+ * @node: node to test
+ * @compat: compatible string to compare with compatible list.
+ */
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char *cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
^ permalink raw reply related
* [PATCH 07/11] of/flattree: Merge unflatten_dt_node
From: Grant Likely @ 2009-11-05 7:46 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and MicroBlaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/kernel/prom.c | 195 ----------------------------------------
arch/powerpc/kernel/prom.c | 194 ----------------------------------------
drivers/of/fdt.c | 200 +++++++++++++++++++++++++++++++++++++++++
include/linux/of_fdt.h | 4 +
4 files changed, 204 insertions(+), 389 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index eb27bd3..021770a 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,201 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
- unsigned long align)
-{
- void *res;
-
- *mem = _ALIGN(*mem, align);
- res = (void *)*mem;
- *mem += size;
-
- return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
- unsigned long *p,
- struct device_node *dad,
- struct device_node ***allnextpp,
- unsigned long fpsize)
-{
- struct device_node *np;
- struct property *pp, **prev_pp = NULL;
- char *pathp;
- u32 tag;
- unsigned int l, allocl;
- int has_name = 0;
- int new_format = 0;
-
- tag = *((u32 *)(*p));
- if (tag != OF_DT_BEGIN_NODE) {
- printk("Weird tag at start of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- pathp = (char *)*p;
- l = allocl = strlen(pathp) + 1;
- *p = _ALIGN(*p + l, 4);
-
- /* version 0x10 has a more compact unit name here instead of the full
- * path. we accumulate the full path size using "fpsize", we'll rebuild
- * it later. We detect this because the first character of the name is
- * not '/'.
- */
- if ((*pathp) != '/') {
- new_format = 1;
- if (fpsize == 0) {
- /* root node: special case. fpsize accounts for path
- * plus terminating zero. root node only has '/', so
- * fpsize should be 2, but we want to avoid the first
- * level nodes to have two '/' so we use fpsize 1 here
- */
- fpsize = 1;
- allocl = 2;
- } else {
- /* account for '/' and path size minus terminal 0
- * already in 'l'
- */
- fpsize += l;
- allocl = fpsize;
- }
- }
-
- np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
- __alignof__(struct device_node));
- if (allnextpp) {
- memset(np, 0, sizeof(*np));
- np->full_name = ((char *)np) + sizeof(struct device_node);
- if (new_format) {
- char *p2 = np->full_name;
- /* rebuild full path for new format */
- if (dad && dad->parent) {
- strcpy(p2, dad->full_name);
-#ifdef DEBUG
- if ((strlen(p2) + l + 1) != allocl) {
- pr_debug("%s: p: %d, l: %d, a: %d\n",
- pathp, (int)strlen(p2),
- l, allocl);
- }
-#endif
- p2 += strlen(p2);
- }
- *(p2++) = '/';
- memcpy(p2, pathp, l);
- } else
- memcpy(np->full_name, pathp, l);
- prev_pp = &np->properties;
- **allnextpp = np;
- *allnextpp = &np->allnext;
- if (dad != NULL) {
- np->parent = dad;
- /* we temporarily use the next field as `last_child'*/
- if (dad->next == NULL)
- dad->child = np;
- else
- dad->next->sibling = np;
- dad->next = np;
- }
- kref_init(&np->kref);
- }
- while (1) {
- u32 sz, noff;
- char *pname;
-
- tag = *((u32 *)(*p));
- if (tag == OF_DT_NOP) {
- *p += 4;
- continue;
- }
- if (tag != OF_DT_PROP)
- break;
- *p += 4;
- sz = *((u32 *)(*p));
- noff = *((u32 *)((*p) + 4));
- *p += 8;
- if (initial_boot_params->version < 0x10)
- *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
- pname = find_flat_dt_string(noff);
- if (pname == NULL) {
- printk(KERN_INFO
- "Can't find property name in list !\n");
- break;
- }
- if (strcmp(pname, "name") == 0)
- has_name = 1;
- l = strlen(pname) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property),
- __alignof__(struct property));
- if (allnextpp) {
- if (strcmp(pname, "linux,phandle") == 0) {
- np->node = *((u32 *)*p);
- if (np->linux_phandle == 0)
- np->linux_phandle = np->node;
- }
- if (strcmp(pname, "ibm,phandle") == 0)
- np->linux_phandle = *((u32 *)*p);
- pp->name = pname;
- pp->length = sz;
- pp->value = (void *)*p;
- *prev_pp = pp;
- prev_pp = &pp->next;
- }
- *p = _ALIGN((*p) + sz, 4);
- }
- /* with version 0x10 we may not have the name property, recreate
- * it here from the unit name if absent
- */
- if (!has_name) {
- char *p1 = pathp, *ps = pathp, *pa = NULL;
- int sz;
-
- while (*p1) {
- if ((*p1) == '@')
- pa = p1;
- if ((*p1) == '/')
- ps = p1 + 1;
- p1++;
- }
- if (pa < ps)
- pa = p1;
- sz = (pa - ps) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
- __alignof__(struct property));
- if (allnextpp) {
- pp->name = "name";
- pp->length = sz;
- pp->value = pp + 1;
- *prev_pp = pp;
- prev_pp = &pp->next;
- memcpy(pp->value, ps, sz - 1);
- ((char *)pp->value)[sz - 1] = 0;
- pr_debug("fixed up name for %s -> %s\n", pathp,
- (char *)pp->value);
- }
- }
- if (allnextpp) {
- *prev_pp = NULL;
- np->name = of_get_property(np, "name", NULL);
- np->type = of_get_property(np, "device_type", NULL);
-
- if (!np->name)
- np->name = "<NULL>";
- if (!np->type)
- np->type = "<NULL>";
- }
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
- tag = *((u32 *)(*p));
- }
- if (tag != OF_DT_END_NODE) {
- printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- return mem;
-}
-
/**
* unflattens the device-tree passed by the firmware, creating the
* tree of struct device_node. It also fills the "name" and "type"
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 413e608..a102a0a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -80,200 +80,6 @@ extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
struct device_node *of_chosen;
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
- unsigned long align)
-{
- void *res;
-
- *mem = _ALIGN(*mem, align);
- res = (void *)*mem;
- *mem += size;
-
- return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
- unsigned long *p,
- struct device_node *dad,
- struct device_node ***allnextpp,
- unsigned long fpsize)
-{
- struct device_node *np;
- struct property *pp, **prev_pp = NULL;
- char *pathp;
- u32 tag;
- unsigned int l, allocl;
- int has_name = 0;
- int new_format = 0;
-
- tag = *((u32 *)(*p));
- if (tag != OF_DT_BEGIN_NODE) {
- printk("Weird tag at start of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- pathp = (char *)*p;
- l = allocl = strlen(pathp) + 1;
- *p = _ALIGN(*p + l, 4);
-
- /* version 0x10 has a more compact unit name here instead of the full
- * path. we accumulate the full path size using "fpsize", we'll rebuild
- * it later. We detect this because the first character of the name is
- * not '/'.
- */
- if ((*pathp) != '/') {
- new_format = 1;
- if (fpsize == 0) {
- /* root node: special case. fpsize accounts for path
- * plus terminating zero. root node only has '/', so
- * fpsize should be 2, but we want to avoid the first
- * level nodes to have two '/' so we use fpsize 1 here
- */
- fpsize = 1;
- allocl = 2;
- } else {
- /* account for '/' and path size minus terminal 0
- * already in 'l'
- */
- fpsize += l;
- allocl = fpsize;
- }
- }
-
-
- np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
- __alignof__(struct device_node));
- if (allnextpp) {
- memset(np, 0, sizeof(*np));
- np->full_name = ((char*)np) + sizeof(struct device_node);
- if (new_format) {
- char *p = np->full_name;
- /* rebuild full path for new format */
- if (dad && dad->parent) {
- strcpy(p, dad->full_name);
-#ifdef DEBUG
- if ((strlen(p) + l + 1) != allocl) {
- DBG("%s: p: %d, l: %d, a: %d\n",
- pathp, (int)strlen(p), l, allocl);
- }
-#endif
- p += strlen(p);
- }
- *(p++) = '/';
- memcpy(p, pathp, l);
- } else
- memcpy(np->full_name, pathp, l);
- prev_pp = &np->properties;
- **allnextpp = np;
- *allnextpp = &np->allnext;
- if (dad != NULL) {
- np->parent = dad;
- /* we temporarily use the next field as `last_child'*/
- if (dad->next == 0)
- dad->child = np;
- else
- dad->next->sibling = np;
- dad->next = np;
- }
- kref_init(&np->kref);
- }
- while(1) {
- u32 sz, noff;
- char *pname;
-
- tag = *((u32 *)(*p));
- if (tag == OF_DT_NOP) {
- *p += 4;
- continue;
- }
- if (tag != OF_DT_PROP)
- break;
- *p += 4;
- sz = *((u32 *)(*p));
- noff = *((u32 *)((*p) + 4));
- *p += 8;
- if (initial_boot_params->version < 0x10)
- *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
- pname = find_flat_dt_string(noff);
- if (pname == NULL) {
- printk("Can't find property name in list !\n");
- break;
- }
- if (strcmp(pname, "name") == 0)
- has_name = 1;
- l = strlen(pname) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property),
- __alignof__(struct property));
- if (allnextpp) {
- if (strcmp(pname, "linux,phandle") == 0) {
- np->node = *((u32 *)*p);
- if (np->linux_phandle == 0)
- np->linux_phandle = np->node;
- }
- if (strcmp(pname, "ibm,phandle") == 0)
- np->linux_phandle = *((u32 *)*p);
- pp->name = pname;
- pp->length = sz;
- pp->value = (void *)*p;
- *prev_pp = pp;
- prev_pp = &pp->next;
- }
- *p = _ALIGN((*p) + sz, 4);
- }
- /* with version 0x10 we may not have the name property, recreate
- * it here from the unit name if absent
- */
- if (!has_name) {
- char *p = pathp, *ps = pathp, *pa = NULL;
- int sz;
-
- while (*p) {
- if ((*p) == '@')
- pa = p;
- if ((*p) == '/')
- ps = p + 1;
- p++;
- }
- if (pa < ps)
- pa = p;
- sz = (pa - ps) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
- __alignof__(struct property));
- if (allnextpp) {
- pp->name = "name";
- pp->length = sz;
- pp->value = pp + 1;
- *prev_pp = pp;
- prev_pp = &pp->next;
- memcpy(pp->value, ps, sz - 1);
- ((char *)pp->value)[sz - 1] = 0;
- DBG("fixed up name for %s -> %s\n", pathp,
- (char *)pp->value);
- }
- }
- if (allnextpp) {
- *prev_pp = NULL;
- np->name = of_get_property(np, "name", NULL);
- np->type = of_get_property(np, "device_type", NULL);
-
- if (!np->name)
- np->name = "<NULL>";
- if (!np->type)
- np->type = "<NULL>";
- }
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
- tag = *((u32 *)(*p));
- }
- if (tag != OF_DT_END_NODE) {
- printk("Weird tag at end of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- return mem;
-}
-
static int __init early_parse_mem(char *p)
{
if (!p)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 01a7f5f..df1ac8d 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -167,3 +167,203 @@ int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
return 0;
}
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+ unsigned long align)
+{
+ void *res;
+
+ *mem = _ALIGN(*mem, align);
+ res = (void *)*mem;
+ *mem += size;
+
+ return res;
+}
+
+/**
+ * unflatten_dt_node - Alloc and populate a device_node from the flat tree
+ * @p: pointer to node in flat tree
+ * @dad: Parent struct device_node
+ * @allnextpp: pointer to ->allnext from last allocated device_node
+ * @fpsize: Size of the node path up at the current depth.
+ */
+unsigned long __init unflatten_dt_node(unsigned long mem,
+ unsigned long *p,
+ struct device_node *dad,
+ struct device_node ***allnextpp,
+ unsigned long fpsize)
+{
+ struct device_node *np;
+ struct property *pp, **prev_pp = NULL;
+ char *pathp;
+ u32 tag;
+ unsigned int l, allocl;
+ int has_name = 0;
+ int new_format = 0;
+
+ tag = *((u32 *)(*p));
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk("Weird tag at start of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ pathp = (char *)*p;
+ l = allocl = strlen(pathp) + 1;
+ *p = _ALIGN(*p + l, 4);
+
+ /* version 0x10 has a more compact unit name here instead of the full
+ * path. we accumulate the full path size using "fpsize", we'll rebuild
+ * it later. We detect this because the first character of the name is
+ * not '/'.
+ */
+ if ((*pathp) != '/') {
+ new_format = 1;
+ if (fpsize == 0) {
+ /* root node: special case. fpsize accounts for path
+ * plus terminating zero. root node only has '/', so
+ * fpsize should be 2, but we want to avoid the first
+ * level nodes to have two '/' so we use fpsize 1 here
+ */
+ fpsize = 1;
+ allocl = 2;
+ } else {
+ /* account for '/' and path size minus terminal 0
+ * already in 'l'
+ */
+ fpsize += l;
+ allocl = fpsize;
+ }
+ }
+
+ np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+ __alignof__(struct device_node));
+ if (allnextpp) {
+ memset(np, 0, sizeof(*np));
+ np->full_name = ((char *)np) + sizeof(struct device_node);
+ if (new_format) {
+ char *fn = np->full_name;
+ /* rebuild full path for new format */
+ if (dad && dad->parent) {
+ strcpy(fn, dad->full_name);
+#ifdef DEBUG
+ if ((strlen(fn) + l + 1) != allocl) {
+ pr_debug("%s: p: %d, l: %d, a: %d\n",
+ pathp, (int)strlen(fn),
+ l, allocl);
+ }
+#endif
+ fn += strlen(fn);
+ }
+ *(fn++) = '/';
+ memcpy(fn, pathp, l);
+ } else
+ memcpy(np->full_name, pathp, l);
+ prev_pp = &np->properties;
+ **allnextpp = np;
+ *allnextpp = &np->allnext;
+ if (dad != NULL) {
+ np->parent = dad;
+ /* we temporarily use the next field as `last_child'*/
+ if (dad->next == NULL)
+ dad->child = np;
+ else
+ dad->next->sibling = np;
+ dad->next = np;
+ }
+ kref_init(&np->kref);
+ }
+ while (1) {
+ u32 sz, noff;
+ char *pname;
+
+ tag = *((u32 *)(*p));
+ if (tag == OF_DT_NOP) {
+ *p += 4;
+ continue;
+ }
+ if (tag != OF_DT_PROP)
+ break;
+ *p += 4;
+ sz = *((u32 *)(*p));
+ noff = *((u32 *)((*p) + 4));
+ *p += 8;
+ if (initial_boot_params->version < 0x10)
+ *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+ pname = find_flat_dt_string(noff);
+ if (pname == NULL) {
+ pr_info("Can't find property name in list !\n");
+ break;
+ }
+ if (strcmp(pname, "name") == 0)
+ has_name = 1;
+ l = strlen(pname) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+ __alignof__(struct property));
+ if (allnextpp) {
+ if (strcmp(pname, "linux,phandle") == 0) {
+ np->node = *((u32 *)*p);
+ if (np->linux_phandle == 0)
+ np->linux_phandle = np->node;
+ }
+ if (strcmp(pname, "ibm,phandle") == 0)
+ np->linux_phandle = *((u32 *)*p);
+ pp->name = pname;
+ pp->length = sz;
+ pp->value = (void *)*p;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ }
+ *p = _ALIGN((*p) + sz, 4);
+ }
+ /* with version 0x10 we may not have the name property, recreate
+ * it here from the unit name if absent
+ */
+ if (!has_name) {
+ char *p1 = pathp, *ps = pathp, *pa = NULL;
+ int sz;
+
+ while (*p1) {
+ if ((*p1) == '@')
+ pa = p1;
+ if ((*p1) == '/')
+ ps = p1 + 1;
+ p1++;
+ }
+ if (pa < ps)
+ pa = p1;
+ sz = (pa - ps) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+ __alignof__(struct property));
+ if (allnextpp) {
+ pp->name = "name";
+ pp->length = sz;
+ pp->value = pp + 1;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ memcpy(pp->value, ps, sz - 1);
+ ((char *)pp->value)[sz - 1] = 0;
+ pr_debug("fixed up name for %s -> %s\n", pathp,
+ (char *)pp->value);
+ }
+ }
+ if (allnextpp) {
+ *prev_pp = NULL;
+ np->name = of_get_property(np, "name", NULL);
+ np->type = of_get_property(np, "device_type", NULL);
+
+ if (!np->name)
+ np->name = "<NULL>";
+ if (!np->type)
+ np->type = "<NULL>";
+ }
+ while (tag == OF_DT_BEGIN_NODE) {
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ tag = *((u32 *)(*p));
+ }
+ if (tag != OF_DT_END_NODE) {
+ printk("Weird tag at end of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ return mem;
+}
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 81231e0..ace9068 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -69,6 +69,10 @@ extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
unsigned long *size);
extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
extern unsigned long of_get_flat_dt_root(void);
+extern unsigned long unflatten_dt_node(unsigned long mem, unsigned long *p,
+ struct device_node *dad,
+ struct device_node ***allnextpp,
+ unsigned long fpsize);
/* Other Prototypes */
extern void finish_device_tree(void);
^ permalink raw reply related
* [PATCH 08/11] of/flattree: Merge unflatten_device_tree
From: Grant Likely @ 2009-11-05 7:46 UTC (permalink / raw)
To: linuxppc-dev, devicetree-discuss, benh, sfr, davem, sparclinux,
monstr, microblaze-uclinux
In-Reply-To: <20091105073728.10460.6061.stgit@angua>
Merge common code between PowerPC and MicroBlaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/include/asm/prom.h | 1 -
arch/microblaze/kernel/prom.c | 49 ----------------------------------
arch/powerpc/kernel/prom.c | 50 -----------------------------------
drivers/of/fdt.c | 52 ++++++++++++++++++++++++++++++++++++
include/linux/of.h | 3 ++
include/linux/of_fdt.h | 4 ---
6 files changed, 55 insertions(+), 104 deletions(-)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index ef3ec1d..07d1063 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -37,7 +37,6 @@ extern struct device_node *of_chosen;
#define HAVE_ARCH_DEVTREE_FIXUPS
-extern struct device_node *allnodes; /* temporary while merging */
extern rwlock_t devtree_lock; /* temporary while merging */
/* For updating the device tree at runtime */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 021770a..901d538 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -50,55 +50,6 @@ typedef u32 cell_t;
/* export that to outside world */
struct device_node *of_chosen;
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
- unsigned long start, mem, size;
- struct device_node **allnextp = &allnodes;
-
- pr_debug(" -> unflatten_device_tree()\n");
-
- /* First pass, scan for size */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- size = unflatten_dt_node(0, &start, NULL, NULL, 0);
- size = (size | 3) + 1;
-
- pr_debug(" size is %lx, allocating...\n", size);
-
- /* Allocate memory for the expanded device tree */
- mem = lmb_alloc(size + 4, __alignof__(struct device_node));
- mem = (unsigned long) __va(mem);
-
- ((u32 *)mem)[size / 4] = 0xdeadbeef;
-
- pr_debug(" unflattening %lx...\n", mem);
-
- /* Second pass, do actual unflattening */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
- if (*((u32 *)start) != OF_DT_END)
- printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
- *((u32 *)start));
- if (((u32 *)mem)[size / 4] != 0xdeadbeef)
- printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
- ((u32 *)mem)[size / 4]);
- *allnextp = NULL;
-
- /* Get pointer to OF "/chosen" node for use everywhere */
- of_chosen = of_find_node_by_path("/chosen");
- if (of_chosen == NULL)
- of_chosen = of_find_node_by_path("/chosen@0");
-
- pr_debug(" <- unflatten_device_tree()\n");
-}
-
#define early_init_dt_scan_drconf_memory(node) 0
static int __init early_init_dt_scan_cpus(unsigned long node,
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index a102a0a..1280f34 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -73,8 +73,6 @@ unsigned long tce_alloc_start, tce_alloc_end;
typedef u32 cell_t;
-extern struct device_node *allnodes; /* temporary while merging */
-
extern rwlock_t devtree_lock; /* temporary while merging */
/* export that to outside world */
@@ -119,54 +117,6 @@ static void __init move_device_tree(void)
DBG("<- move_device_tree\n");
}
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
- unsigned long start, mem, size;
- struct device_node **allnextp = &allnodes;
-
- DBG(" -> unflatten_device_tree()\n");
-
- /* First pass, scan for size */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- size = unflatten_dt_node(0, &start, NULL, NULL, 0);
- size = (size | 3) + 1;
-
- DBG(" size is %lx, allocating...\n", size);
-
- /* Allocate memory for the expanded device tree */
- mem = lmb_alloc(size + 4, __alignof__(struct device_node));
- mem = (unsigned long) __va(mem);
-
- ((u32 *)mem)[size / 4] = 0xdeadbeef;
-
- DBG(" unflattening %lx...\n", mem);
-
- /* Second pass, do actual unflattening */
- start = ((unsigned long)initial_boot_params) +
- initial_boot_params->off_dt_struct;
- unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
- if (*((u32 *)start) != OF_DT_END)
- printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start));
- if (((u32 *)mem)[size / 4] != 0xdeadbeef)
- printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
- ((u32 *)mem)[size / 4] );
- *allnextp = NULL;
-
- /* Get pointer to OF "/chosen" node for use everywhere */
- of_chosen = of_find_node_by_path("/chosen");
- if (of_chosen == NULL)
- of_chosen = of_find_node_by_path("/chosen@0");
-
- DBG(" <- unflatten_device_tree()\n");
-}
-
/*
* ibm,pa-features is a per-cpu property that contains a string of
* attribute descriptors, each of which has a 2 byte header plus up
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index df1ac8d..ad3a2b6 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -9,6 +9,8 @@
* version 2 as published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
+#include <linux/lmb.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
@@ -367,3 +369,53 @@ unsigned long __init unflatten_dt_node(unsigned long mem,
*p += 4;
return mem;
}
+
+/**
+ * unflatten_device_tree - create tree of device_nodes from flat blob
+ *
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used.
+ */
+void __init unflatten_device_tree(void)
+{
+ unsigned long start, mem, size;
+ struct device_node **allnextp = &allnodes;
+
+ pr_debug(" -> unflatten_device_tree()\n");
+
+ /* First pass, scan for size */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+ size = (size | 3) + 1;
+
+ pr_debug(" size is %lx, allocating...\n", size);
+
+ /* Allocate memory for the expanded device tree */
+ mem = lmb_alloc(size + 4, __alignof__(struct device_node));
+ mem = (unsigned long) __va(mem);
+
+ ((u32 *)mem)[size / 4] = 0xdeadbeef;
+
+ pr_debug(" unflattening %lx...\n", mem);
+
+ /* Second pass, do actual unflattening */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+ if (*((u32 *)start) != OF_DT_END)
+ pr_warning("Weird tag at end of tree: %08x\n", *((u32 *)start));
+ if (((u32 *)mem)[size / 4] != 0xdeadbeef)
+ pr_warning("End of tree marker overwritten: %08x\n",
+ ((u32 *)mem)[size / 4]);
+ *allnextp = NULL;
+
+ /* Get pointer to OF "/chosen" node for use everywhere */
+ of_chosen = of_find_node_by_path("/chosen");
+ if (of_chosen == NULL)
+ of_chosen = of_find_node_by_path("/chosen@0");
+
+ pr_debug(" <- unflatten_device_tree()\n");
+}
diff --git a/include/linux/of.h b/include/linux/of.h
index e7facd8..bec2157 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -63,6 +63,9 @@ struct device_node {
#endif
};
+/* Pointer for first entry in chain of all nodes. */
+extern struct device_node *allnodes;
+
static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
{
return test_bit(flag, &n->_flags);
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index ace9068..81231e0 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -69,10 +69,6 @@ extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
unsigned long *size);
extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
extern unsigned long of_get_flat_dt_root(void);
-extern unsigned long unflatten_dt_node(unsigned long mem, unsigned long *p,
- struct device_node *dad,
- struct device_node ***allnextpp,
- unsigned long fpsize);
/* Other Prototypes */
extern void finish_device_tree(void);
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox