* Re: [patch 06/13] powerpc: Fixup last users of irq_chip->typename
From: Grant Likely @ 2009-11-21 8:01 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: Scott Wood, linuxppc-dev, Ingo Molnar, LKML
In-Reply-To: <alpine.LFD.2.00.0911182141060.24119@localhost.localdomain>
On Wed, Nov 18, 2009 at 1:41 PM, Thomas Gleixner <tglx@linutronix.de> wrote=
:
> On Wed, 18 Nov 2009, Scott Wood wrote:
>> On Tue, Nov 17, 2009 at 10:50:53PM +0000, Thomas Gleixner wrote:
>> > Index: linux-2.6/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
>> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>> > --- linux-2.6.orig/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
>> > +++ linux-2.6/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
>> > @@ -69,7 +69,7 @@ static void pq2ads_pci_unmask_irq(unsign
>> > =A0}
>> >
>> > =A0static struct irq_chip pq2ads_pci_ic =3D {
>> > - =A0 .typename =3D "PQ2 ADS PCI",
>> > + =A0 .name =3D "PQ2 ADS PCI",
>> > =A0 =A0 .name =3D "PQ2 ADS PCI",
>> > =A0 =A0 .end =3D pq2ads_pci_unmask_irq,
>> > =A0 =A0 .mask =3D pq2ads_pci_mask_irq,
>>
>> Duplicate ".name"...
>
> Darn.
Other than that, looks good to me.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: spi_mpc8xxx.c: chip select polarity problem
From: Grant Likely @ 2009-11-21 8:45 UTC (permalink / raw)
To: avorontsov; +Cc: Torsten Fleischer, linuxppc-dev
In-Reply-To: <20091118232920.GA24307@oksana.dev.rtsoft.ru>
On Wed, Nov 18, 2009 at 4:29 PM, Anton Vorontsov
<avorontsov@ru.mvista.com> wrote:
> On Wed, Nov 18, 2009 at 05:20:06PM +0100, Torsten Fleischer wrote:
> [...]
>> > Oh. On the other hand, we can postpone the gpio_direction_output()
>> > call, and still require that the platform code (or firmware)
>> > should be responsible for setting a sane default values on the
>> > chip selects.
>> >
>>
>> How about that?
>
> Looks great, thanks!
>
> Few minor issues below.
Hey Torsten, do you have an updated version of this change to address
the comments? I'm collecting the last few things for some linux-next
exposure now.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 00/10 v6] Fix 8xx MMU/TLB
From: Joakim Tjernlund @ 2009-11-21 10:27 UTC (permalink / raw)
To: Rex Feany; +Cc: Scott Wood, linuxppc-dev@ozlabs.org
In-Reply-To: <20091120202838.GA25843@compile2.chatsunix.int.mrv.com>
Rex Feany <RFeany@mrv.com> wrote on 20/11/2009 21:28:38:
>
> Thus spake Joakim Tjernlund (Joakim.Tjernlund@transmode.se):
>
> > Yet again an iteration of the series.
> > Rex & Scott, please test and signoff.
> > Changes since last version:
> > - Fix rlwimi insn(from Scott)
>
> Hi Joakim,
>
> Things look much better with this patch set, I see none
> of the random crashes that I had with the earlier patches.
> I'll leave it running on a few boards here over the weekend and
> see if anything bad happens.
Good to hear that.
>
> Since patch #1 fixes a regression in the current kernel
> is there any way you can get that into .32? I know it is late,
> but without that patch .32 doesn't work for 8xx boards.
You need to convince Ben of that. I guess the best you can do
is to reply(include Ben too) with your s-o-b and explain that this
fixes a regression for you.
>
> On another note, how does your patch set affect performance?
> Have you been able to do any testing? What is the advantage
> of using dcbX in the kernel, besides keeping the code
> similar to other ppc platforms?
I consider this a big plus, not having to pay special attention
to 8xx anymore. There aren't many 8xx people around
to fix problems that are specific for 8xx.
> Maybe it is good to
> catch/fixup userspace uses of dcbX, but why change the
> kernel? How does it affect performance?
when I originally did the dcbX path many years ago I did
some perf testing and it was a win. Perhaps you could
run a some tests?
Consider that the dcbx workaround is only triggered by a DTLB errors
and the kernel never gets into DTLB errors for normal activity.
TLB errors are the slow path anyway with lots of mm code
so a few more insn won't matter.
There is also the case of dcbst setting the store bit wrongly
and this could generate a SEGV if it hits a RO page.
The kernel isn't free of dcbX insn anyway so if it ever hit
a DTLB error, it is possible that could bring down the kernel.
The only perf regression I can think of is the
8xx: Remove DIRTY pte handling in DTLB Error.
which will make dirty handling much slower.
I am happy to leave that one out, but Ben requested
this.
Jocke
PS.
You should consider fixing glibc's mem* functions to make
use of dcbX for 8xx once the kernel has this patchset.
^ permalink raw reply
* Re: tg3: link is permanently down after ifdown and ifup
From: Felix Radensky @ 2009-11-21 11:03 UTC (permalink / raw)
To: Michael Chan; +Cc: netdev@vger.kernel.org, mcarlson, linuxppc-dev@ozlabs.org
In-Reply-To: <1258671053.14964.20.camel@nseg_linux_HP1.broadcom.com>
Hi,
Michael Chan wrote:
> On Thu, 2009-11-19 at 08:08 -0800, Felix Radensky wrote:
>
>> Hi,
>>
>> The problem goes away if I remove the call to
>>
>> tg3_set_power_state(tp, PCI_D3hot);
>>
>> from tg3_close().
>>
>
> Added Matt to CC. He is on vacation and may not be able to look into
> this right away. Thanks.
>
>
Thanks, Michael. After digging some more into it, I've found that the
problem is in tg3_power_down_phy() routine. Apparently 57780 PHY
is not handled properly. If tg3_power_down_phy() is not invoked from
tg3_set_power_state(), the problem is not reproducible anymore. I don't
have enough information about NIC internals to dig further.
Felix.
^ permalink raw reply
* Re: spi_mpc8xxx.c: chip select polarity problem
From: Torsten Fleischer @ 2009-11-21 16:08 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40911210045v4be84e8dg8ef490472e06017b@mail.gmail.com>
On Sat, Nov 21, 2009 at 09:45:50 Grant Likely wrote:
[...]
> Hey Torsten, do you have an updated version of this change to address
> the comments? I'm collecting the last few things for some linux-next
> exposure now.
Hey Grant,
here is the updated version of the patch containing the recommended
changes.
Best Regards
Torsten
Signed-off-by: Torsten Fleischer <to-fleischer@t-online.de>
---
diff -u -r -N linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c linux-2.6.31.6/drivers/spi/spi_mpc8xxx.c
--- linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c 2009-11-10 01:32:31.000000000 +0100
+++ linux-2.6.31.6/drivers/spi/spi_mpc8xxx.c 2009-11-19 08:15:33.000000000 +0100
@@ -114,6 +114,7 @@
u32 rx_shift; /* RX data reg shift when in qe mode */
u32 tx_shift; /* TX data reg shift when in qe mode */
u32 hw_mode; /* Holds HW mode register settings */
+ int initialized;
};
static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val)
@@ -503,15 +504,52 @@
return ret;
}
+
+
+struct mpc8xxx_spi_probe_info {
+ struct fsl_spi_platform_data pdata;
+ int *gpios;
+ bool *alow_flags;
+};
+
+static struct mpc8xxx_spi_probe_info *
+to_of_pinfo(struct fsl_spi_platform_data *pdata)
+{
+ return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata);
+}
+
+static int mpc8xxx_spi_cs_init(struct spi_device *spi)
+{
+ struct device *dev = spi->dev.parent;
+ struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
+ u16 cs = spi->chip_select;
+ int gpio = pinfo->gpios[cs];
+ bool on = pinfo->alow_flags[cs] ^ !(spi->mode & SPI_CS_HIGH);
+
+ return gpio_direction_output(gpio, on);
+}
+
static int mpc8xxx_spi_transfer(struct spi_device *spi,
struct spi_message *m)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
+ struct spi_mpc8xxx_cs *cs = spi->controller_state;
unsigned long flags;
m->actual_length = 0;
m->status = -EINPROGRESS;
+ if (cs && !cs->initialized) {
+ int ret;
+
+ ret = mpc8xxx_spi_cs_init(spi);
+ if (ret) {
+ dev_dbg(&spi->dev, "cs_init failed: %d\n", ret);
+ return ret;
+ }
+ cs->initialized = 1;
+ }
+
spin_lock_irqsave(&mpc8xxx_spi->lock, flags);
list_add_tail(&m->queue, &mpc8xxx_spi->queue);
queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work);
@@ -648,18 +686,6 @@
return 0;
}
-struct mpc8xxx_spi_probe_info {
- struct fsl_spi_platform_data pdata;
- int *gpios;
- bool *alow_flags;
-};
-
-static struct mpc8xxx_spi_probe_info *
-to_of_pinfo(struct fsl_spi_platform_data *pdata)
-{
- return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata);
-}
-
static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on)
{
struct device *dev = spi->dev.parent;
@@ -720,14 +746,6 @@
pinfo->gpios[i] = gpio;
pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW;
-
- ret = gpio_direction_output(pinfo->gpios[i],
- pinfo->alow_flags[i]);
- if (ret) {
- dev_err(dev, "can't set output direction for gpio "
- "#%d: %d\n", i, ret);
- goto err_loop;
- }
}
pdata->max_chipselect = ngpios;
^ permalink raw reply
* DTS for PowerPC 440 based board
From: Vinayak Kale @ 2009-11-21 18:46 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 627 bytes --]
Hi,
I am porting 2.6.31 for a PowerPC 440 core based board. I have couple of
queries. I would really appreciate if someone could answer since i couldn't
find info from other places.
1) Is it mandatory to create a DTS file?
2) If uboot passes BDInfo struct to kernel instead of DT blob, then in this
case does kernel creates FDT at run time?
3) I believe in case of DTS, the kernel picks up the h/w info from DTS blob
so we need not hardcode any register addresses etc inside kernel other than
in dts file. What happens in case of uboot passing just BDInfo struct. How
do we specify the register addresses etc?
Thanks
Vinayak
[-- Attachment #2: Type: text/html, Size: 670 bytes --]
^ permalink raw reply
* Re: [RFC] powerpc/mm: honor O_SYNC flag for memory map
From: Segher Boessenkool @ 2009-11-21 20:01 UTC (permalink / raw)
To: Li Yang; +Cc: Li Yang-R58472, linuxppc-dev
In-Reply-To: <2a27d3730911200123i23fa6dd1td9e19944d1737e73@mail.gmail.com>
>> You need to be a bit more careful tho. You must not allow RAM
>> managed by
>> the kernel to be mapped non-cachable.
>
> Even if the user explicitly sets the O_SYNC flag? IMHO, it's a bug of
> the application if it uses O_SYNC on main memory to be mmap'ed later.
> And we don't need to cover up the bug.
Is that "embedded thinking"? Conflicts like this cause machine
checks or
checkstops on many PowerPC implementations, we do not normally allow
such
to be caused by userland.
Segher
^ permalink raw reply
* Re: DTS for PowerPC 440 based board
From: David Gibson @ 2009-11-21 21:20 UTC (permalink / raw)
To: Vinayak Kale; +Cc: linuxppc-dev
In-Reply-To: <5eb65910911211046q433072f1nd2a6eb955593a37a@mail.gmail.com>
On Sun, Nov 22, 2009 at 12:16:59AM +0530, Vinayak Kale wrote:
> Hi,
> I am porting 2.6.31 for a PowerPC 440 core based board. I have couple of
> queries. I would really appreciate if someone could answer since i couldn't
> find info from other places.
>
> 1) Is it mandatory to create a DTS file?
Roughly speaking, yes. You have to supply a device tree to the
kernel somehow, so if the firmware doesn't supply one itself, you will
need to create a DTS.
> 2) If uboot passes BDInfo struct to kernel instead of DT blob, then in this
> case does kernel creates FDT at run time?
Not exactly. In this case the bootwrapper will be built with an FDT
(compiled from a dts) built in. It will however tweak the FDT with
information from the BDInfo before booting the kernel proper.
> 3) I believe in case of DTS, the kernel picks up the h/w info from DTS blob
> so we need not hardcode any register addresses etc inside kernel other than
> in dts file. What happens in case of uboot passing just BDInfo struct. How
> do we specify the register addresses etc?
There's always a device tree which specifies register addresses. If
the firmware only supplies a BDInfo, then the kernel wrapper must have
a device tree built in. In practice that will always be built from a
dts, though it doesn't have to be in theory.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* [RFC PATCH 01/19] powerpc: gamecube/wii: usbgecko bootwrapper console support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-1-git-send-email-albert_herranz@yahoo.es>
Add support for using the USB Gecko adapter as a bootwrapper console on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/boot/Makefile | 2 +-
arch/powerpc/boot/ugecon.c | 128 ++++++++++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/ugecon.h | 25 +++++++++
3 files changed, 154 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/ugecon.c
create mode 100644 arch/powerpc/boot/ugecon.h
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 7bfc8ad..44bce21 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -66,7 +66,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
- fsl-soc.c mpc8xx.c pq2.c
+ fsl-soc.c mpc8xx.c pq2.c ugecon.c
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
diff --git a/arch/powerpc/boot/ugecon.c b/arch/powerpc/boot/ugecon.c
new file mode 100644
index 0000000..704f374
--- /dev/null
+++ b/arch/powerpc/boot/ugecon.c
@@ -0,0 +1,128 @@
+/*
+ * arch/powerpc/boot/ugecon.c
+ *
+ * USB Gecko bootwrapper console.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+
+#define EXI_CLK_32MHZ 5
+
+#define EXI_CSR 0x00
+#define EXI_CSR_CLKMASK (0x7<<4)
+#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4)
+#define EXI_CSR_CSMASK (0x7<<7)
+#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */
+
+#define EXI_CR 0x0c
+#define EXI_CR_TSTART (1<<0)
+#define EXI_CR_WRITE (1<<2)
+#define EXI_CR_READ_WRITE (2<<2)
+#define EXI_CR_TLEN(len) (((len)-1)<<4)
+
+#define EXI_DATA 0x10
+
+
+/* virtual address base for input/output, retrieved from device tree */
+static void *ug_io_base;
+
+
+static u32 ug_io_transaction(u32 in)
+{
+ u32 *csr_reg = ug_io_base + EXI_CSR;
+ u32 *data_reg = ug_io_base + EXI_DATA;
+ u32 *cr_reg = ug_io_base + EXI_CR;
+ u32 csr, data, cr;
+
+ /* select */
+ csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
+ out_be32(csr_reg, csr);
+
+ /* read/write */
+ data = in;
+ out_be32(data_reg, data);
+ cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
+ out_be32(cr_reg, cr);
+
+ while (in_be32(cr_reg) & EXI_CR_TSTART)
+ barrier();
+
+ /* deselect */
+ out_be32(csr_reg, 0);
+
+ data = in_be32(data_reg);
+ return data;
+}
+
+static int ug_is_txfifo_ready(void)
+{
+ return ug_io_transaction(0xc0000000) & 0x04000000;
+}
+
+static void ug_raw_putc(char ch)
+{
+ ug_io_transaction(0xb0000000 | (ch << 20));
+}
+
+static void ug_putc(char ch)
+{
+ int count = 16;
+
+ if (!ug_io_base)
+ return;
+
+ while (!ug_is_txfifo_ready() && count--)
+ barrier();
+ if (count)
+ ug_raw_putc(ch);
+}
+
+void ug_console_write(const char *buf, int len)
+{
+ char *b = (char *)buf;
+
+ while (len--) {
+ if (*b == '\n')
+ ug_putc('\r');
+ ug_putc(*b++);
+ }
+}
+
+int ug_is_adapter_present(void)
+{
+ if (!ug_io_base)
+ return 0;
+
+ return ug_io_transaction(0x90000000) == 0x04700000;
+}
+
+int ug_grab_io_base(void)
+{
+ u32 v;
+ void *devp;
+
+ devp = find_node_by_alias("ugecon");
+ if (devp == NULL)
+ goto err_out;
+ if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+ goto err_out;
+
+ ug_io_base = (u8 *)v;
+ return 0;
+
+err_out:
+ return -1;
+}
diff --git a/arch/powerpc/boot/ugecon.h b/arch/powerpc/boot/ugecon.h
new file mode 100644
index 0000000..1fdb590
--- /dev/null
+++ b/arch/powerpc/boot/ugecon.h
@@ -0,0 +1,25 @@
+/*
+ * arch/powerpc/boot/ugecon.h
+ *
+ * USB Gecko early bootwrapper console.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __UGECON_H
+#define __UGECON_H
+
+extern int ug_grab_io_base(void);
+extern int ug_is_adapter_present(void);
+
+extern void ug_putc(char ch);
+extern void ug_console_write(const char *buf, int len);
+
+#endif /* __UGECON_H */
+
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 00/19] powerpc: nintendo gamecube and wii support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
The following patches add the base support for the Nintendo GameCube
and Wii video game consoles on the powerpc arch.
For each video game console, the following is included:
- a device tree source
- bootwrapper support
- udbg console option
- early udbg console option
- interrupt controller support
- platform support
The Nintendo Wii patches also include support for:
- recognition of the broadway processor
- ipc communication with the open source 'mini' firmware replacement
With these patches both video game consoles can fully boot up to the
root filesystem mount phase.
Albert Herranz (19):
powerpc: gamecube/wii: usbgecko bootwrapper console support
powerpc: gamecube: device tree
powerpc: gamecube: bootwrapper bits
powerpc: wii: device tree
powerpc: wii: bootwrapper bits
powerpc: gamecube/wii: introduce GAMECUBE_COMMON
powerpc: gamecube/wii: declare as non-coherent platforms
powerpc: gamecube/wii: do not include PCI support
powerpc: gamecube/wii: udbg support for usbgecko
powerpc: gamecube/wii: early debugging using usbgecko
powerpc: gamecube/wii: flipper interrupt controller support
powerpc: gamecube: platform support
powerpc: gamecube: default config
powerpc: allow ioremap within reserved fake ram regions
powerpc: broadway processor support
powerpc: wii: hollywood interrupt controller support
powerpc: wii: bootmii starlet 'mini' firmware support
powerpc: wii: platform support
powerpc: wii: default config
arch/powerpc/Kconfig | 2 +-
arch/powerpc/Kconfig.debug | 8 +
arch/powerpc/boot/Makefile | 7 +-
arch/powerpc/boot/dts/gamecube.dts | 135 ++
arch/powerpc/boot/dts/wii.dts | 244 ++++
arch/powerpc/boot/gamecube.c | 78 ++
arch/powerpc/boot/ugecon.c | 128 ++
arch/powerpc/boot/ugecon.h | 25 +
arch/powerpc/boot/wii.c | 173 +++
arch/powerpc/boot/wrapper | 3 +
arch/powerpc/configs/gamecube_defconfig | 1061 +++++++++++++++
arch/powerpc/configs/wii_defconfig | 1406 ++++++++++++++++++++
arch/powerpc/include/asm/starlet-mini.h | 175 +++
arch/powerpc/include/asm/starlet.h | 26 +
arch/powerpc/include/asm/udbg.h | 1 +
arch/powerpc/kernel/cputable.c | 28 +-
arch/powerpc/kernel/head_32.S | 21 +
arch/powerpc/kernel/udbg.c | 2 +
arch/powerpc/mm/pgtable_32.c | 19 +-
arch/powerpc/platforms/Kconfig.cputype | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 57 +
arch/powerpc/platforms/embedded6xx/Makefile | 6 +
arch/powerpc/platforms/embedded6xx/flipper-pic.c | 247 ++++
arch/powerpc/platforms/embedded6xx/flipper-pic.h | 25 +
arch/powerpc/platforms/embedded6xx/gamecube.c | 112 ++
arch/powerpc/platforms/embedded6xx/gamecube_dev.c | 34 +
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 238 ++++
arch/powerpc/platforms/embedded6xx/hlwd-pic.h | 22 +
arch/powerpc/platforms/embedded6xx/starlet-mipc.c | 1053 +++++++++++++++
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 318 +++++
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h | 36 +
arch/powerpc/platforms/embedded6xx/wii.c | 270 ++++
arch/powerpc/platforms/embedded6xx/wii_dev.c | 47 +
33 files changed, 5988 insertions(+), 21 deletions(-)
create mode 100644 arch/powerpc/boot/dts/gamecube.dts
create mode 100644 arch/powerpc/boot/dts/wii.dts
create mode 100644 arch/powerpc/boot/gamecube.c
create mode 100644 arch/powerpc/boot/ugecon.c
create mode 100644 arch/powerpc/boot/ugecon.h
create mode 100644 arch/powerpc/boot/wii.c
create mode 100644 arch/powerpc/configs/gamecube_defconfig
create mode 100644 arch/powerpc/configs/wii_defconfig
create mode 100644 arch/powerpc/include/asm/starlet-mini.h
create mode 100644 arch/powerpc/include/asm/starlet.h
create mode 100644 arch/powerpc/platforms/embedded6xx/flipper-pic.c
create mode 100644 arch/powerpc/platforms/embedded6xx/flipper-pic.h
create mode 100644 arch/powerpc/platforms/embedded6xx/gamecube.c
create mode 100644 arch/powerpc/platforms/embedded6xx/gamecube_dev.c
create mode 100644 arch/powerpc/platforms/embedded6xx/hlwd-pic.c
create mode 100644 arch/powerpc/platforms/embedded6xx/hlwd-pic.h
create mode 100644 arch/powerpc/platforms/embedded6xx/starlet-mipc.c
create mode 100644 arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
create mode 100644 arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
create mode 100644 arch/powerpc/platforms/embedded6xx/wii.c
create mode 100644 arch/powerpc/platforms/embedded6xx/wii_dev.c
^ permalink raw reply
* [RFC PATCH 02/19] powerpc: gamecube: device tree
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-2-git-send-email-albert_herranz@yahoo.es>
Add a device tree source file for the Nintendo GameCube video game console.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/boot/dts/gamecube.dts | 135 ++++++++++++++++++++++++++++++++++++
1 files changed, 135 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/gamecube.dts
diff --git a/arch/powerpc/boot/dts/gamecube.dts b/arch/powerpc/boot/dts/gamecube.dts
new file mode 100644
index 0000000..941a2c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/gamecube.dts
@@ -0,0 +1,135 @@
+/*
+ * arch/powerpc/boot/dts/gamecube.dts
+ *
+ * Nintendo GameCube platform device tree source
+ * Copyright (C) 2007-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ model = "NintendoGameCube";
+ compatible = "nintendo,gamecube";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
+ linux,stdout-path = &USBGECKO0;
+ };
+
+ aliases {
+ ugecon = &USBGECKO0;
+ };
+
+ memory {
+ device_type = "memory";
+ /* 24M minus framebuffer memory area (640*576*2*2) */
+ reg = <0x00000000 0x01698000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,gekko@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <486000000>; /* 486MHz */
+ bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
+ timebase-frequency = <40500000>; /* 162MHz / 4 */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ };
+ };
+
+ /* devices contained int the flipper chipset */
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ model = "flipper";
+ compatible = "nintendo,flipper";
+ clock-frequency = <162000000>; /* 162MHz */
+ ranges = <0x0c000000 0x0c000000 0x00010000>;
+
+ video@0c002000 {
+ compatible = "nintendo,flipper-video";
+ reg = <0x0c002000 0x100>;
+ interrupts = <8>;
+ interrupt-parent = <&pic>;
+ /* XFB is the eXternal FrameBuffer */
+ xfb-start = <0x01698000>; /* end-of-ram - xfb-size */
+ xfb-size = <0x168000>;
+ };
+
+ pic: pic@0c003000 {
+ #interrupt-cells = <1>;
+ compatible = "nintendo,flipper-pic";
+ reg = <0x0c003000 0x8>;
+ interrupt-controller;
+ };
+
+ resetswitch@0c003000 {
+ compatible = "nintendo,flipper-resetswitch";
+ reg = <0x0c003000 0x4>;
+ interrupts = <1>;
+ interrupt-parent = <&pic>;
+ };
+
+ auxram@0c005000 {
+ compatible = "nintendo,flipper-auxram";
+ reg = <0x0c005000 0x200>; /* DSP */
+ interrupts = <6>;
+ interrupt-parent = <&pic>;
+ };
+
+ audio@0c005000 {
+ compatible = "nintendo,flipper-audio";
+ reg = <0x0c005000 0x200 /* DSP */
+ 0x0c006c00 0x20>; /* AI */
+ interrupts = <6>;
+ interrupt-parent = <&pic>;
+ };
+
+ disk@0c006000 {
+ compatible = "nintendo,flipper-disk";
+ reg = <0x0c006000 0x40>;
+ interrupts = <2>;
+ interrupt-parent = <&pic>;
+ };
+
+ serial@0c006400 {
+ compatible = "nintendo,flipper-serial";
+ reg = <0x0c006400 0x100>;
+ interrupts = <3>;
+ interrupt-parent = <&pic>;
+ };
+
+ /* External Interface bus */
+ exi@0c006800 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nintendo,flipper-exi";
+ reg = <0x0c006800 0x40>;
+ interrupts = <4>;
+ interrupt-parent = <&pic>;
+
+ USBGECKO0: usbgecko@0c006814 {
+ compatible = "usbgecko,usbgecko";
+ reg = <0x0c006814 0x14>;
+ virtual-reg = <0xcc006814>;
+ };
+ };
+ };
+};
+
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 03/19] powerpc: gamecube: bootwrapper bits
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-3-git-send-email-albert_herranz@yahoo.es>
Add support for the Nintendo GameCube video game console to the powerpc
bootwrapper.
dtbImage.gamecube is a wrapped image that contains a flat device tree,
an entry point compatible with SDload, and an optional initrd.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/boot/Makefile | 4 ++-
arch/powerpc/boot/gamecube.c | 78 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 81 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/gamecube.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 44bce21..b2f06b0 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -76,7 +76,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
+ cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
+ gamecube.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -254,6 +255,7 @@ image-$(CONFIG_KSI8560) += cuImage.ksi8560
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
+image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
diff --git a/arch/powerpc/boot/gamecube.c b/arch/powerpc/boot/gamecube.c
new file mode 100644
index 0000000..0d6c517
--- /dev/null
+++ b/arch/powerpc/boot/gamecube.c
@@ -0,0 +1,78 @@
+/*
+ * arch/powerpc/boot/gamecube.c
+ *
+ * Nintendo GameCube bootwrapper support
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+#include "ugecon.h"
+
+BSS_STACK(8192);
+
+/*
+ * We enter with the cache enabled, the MMU enabled and some known legacy
+ * memory mappings active. xBAT3 is unused.
+ *
+ * We leave the MMU enabled, but we switch to an identity mapped memory
+ * scheme as expected by the start code.
+ *
+ */
+asm ("\n\
+.text\n\
+.globl _zimage_start\n\
+_zimage_start:\n\
+\n\
+ isync\n\
+ /* IBAT3,DBAT3 for first 16Mbytes */\n\
+ li 8, 0x01ff /* 16MB */\n\
+ li 9, 0x0002 /* rw */\n\
+ mtspr 0x216, 8 /* IBAT3U */\n\
+ mtspr 0x217, 9 /* IBAT3L */\n\
+ mtspr 0x21e, 8 /* DBAT3U */\n\
+ mtspr 0x21f, 9 /* DBAT3L */\n\
+\n\
+ sync\n\
+ isync\n\
+\n\
+ li 3, 0\n\
+ li 4, 0\n\
+ li 5, 0\n\
+\n\
+ bcl- 20,4*cr7+so,1f\n\
+1:\n\
+ mflr 8\n\
+ clrlwi 8, 8, 3\n\
+ addi 8, 8, 2f - 1b\n\
+ mtlr 8\n\
+ blr\n\
+2:\n\
+ b _zimage_start_lib\n\
+");
+
+/*
+ *
+ */
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+ u32 heapsize = 16*1024*1024 - (u32)_end;
+
+ simple_alloc_init(_end, heapsize, 32, 64);
+ fdt_init(_dtb_start);
+
+ if (!ug_grab_io_base() && ug_is_adapter_present())
+ console_ops.write = ug_console_write;
+}
+
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 04/19] powerpc: wii: device tree
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-4-git-send-email-albert_herranz@yahoo.es>
Add a device tree source file for the Nintendo Wii video game console.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/boot/dts/wii.dts | 244 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 244 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/wii.dts
diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
new file mode 100644
index 0000000..a30a804
--- /dev/null
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -0,0 +1,244 @@
+/*
+ * arch/powerpc/boot/dts/wii.dts
+ *
+ * Nintendo Wii platform device tree source
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01800000 0xe800000; /* memory hole (includes I/O area) */
+/memreserve/ 0x10000000 0x0004000; /* DSP RAM */
+
+/ {
+ model = "NintendoWii";
+ compatible = "nintendo,wii";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ /* root filesystem on 2nd partition of SD card */
+ bootargs = "nobats root=/dev/mmcblk0p2 rootwait udbg-immortal";
+ linux,stdout-path = &USBGECKO0;
+ };
+
+ aliases {
+ ugecon = &USBGECKO0;
+ hw_gpio = &gpio1;
+ };
+
+ /*
+ * The Nintendo Wii has two discontiguous RAM memory areas called
+ * MEM1 and MEM2.
+ * MEM1 starts at 0x00000000 and contains 24MB of 1T-SRAM.
+ * MEM2 starts at 0x10000000 and contains 64MB of DDR2 RAM.
+ * Between both memory address ranges there is an address space
+ * where memory-mapped I/O registers are found.
+ *
+ * Currently, Linux 32-bit PowerPC does not support RAM in
+ * discontiguous memory address spaces. Thus, in order to use
+ * both RAM areas, we declare as RAM the range from the start of
+ * MEM1 to the end of useable MEM2 and exclude the needed parts
+ * with /memreserve/ statements, at the expense of wasting a bit
+ * of memory.
+ */
+ memory {
+ device_type = "memory";
+ /* MEM1 + memory hole + MEM2 - firmware/buffers area */
+ reg = <0x00000000 0x133e0000>;
+ };
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,broadway@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <729000000>; /* 729MHz */
+ bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
+ timebase-frequency = <60750000>; /* 243MHz / 4 */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ };
+ };
+
+ /* devices contained in the hollywood chipset */
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ model = "hollywood";
+ compatible = "nintendo,hollywood";
+ clock-frequency = <243000000>; /* 243MHz */
+ ranges = <0x0c000000 0x0c000000 0x00010000
+ 0x0d000000 0x0d000000 0x00010000
+ 0x0d040000 0x0d040000 0x00050000
+ 0x0d800000 0x0d800000 0x00001000
+ 0x133e0000 0x133e0000 0x00c20000>;
+
+ video@0c002000 {
+ compatible = "nintendo,hollywood-video";
+ reg = <0x0c002000 0x100>;
+ interrupts = <8>;
+ interrupt-parent = <&PIC0>;
+ };
+
+ PIC0: pic0@0c003000 {
+ #interrupt-cells = <1>;
+ compatible = "nintendo,flipper-pic";
+ reg = <0x0c003000 0x8>;
+ interrupt-controller;
+ };
+
+ resetswitch@0c003000 {
+ compatible = "nintendo,hollywood-resetswitch";
+ reg = <0x0c003000 0x4>;
+ interrupts = <1>;
+ interrupt-parent = <&PIC0>;
+ };
+
+ audio@0c005000 {
+ compatible = "nintendo,hollywood-audio";
+ reg = <0x0c005000 0x200 /* DSP */
+ 0x0d006c00 0x20>; /* AI */
+ interrupts = <6>;
+ interrupt-parent = <&PIC0>;
+ };
+
+ /* Team Twiizers' 'mini' firmware IPC */
+ mini@0d000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ compatible = "twiizers,starlet-mini-ipc";
+ reg = <0x0d000000 0x40 /* IPC */
+ 0x13fffffc 0x4>; /* mini header pointer */
+ };
+
+ serial@0d006400 {
+ compatible = "nintendo,hollywood-serial";
+ reg = <0x0d006400 0x100>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC0>;
+ };
+
+ /* External Interface bus */
+ exi@0d006800 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nintendo,hollywood-exi";
+ reg = <0x0d006800 0x40>;
+ interrupts = <4>;
+ interrupt-parent = <&PIC0>;
+
+ USBGECKO0: usbgecko@0d006814 {
+ compatible = "usbgecko,usbgecko";
+ reg = <0x0d006814 0x14>;
+ virtual-reg = <0xcd006814>;
+ };
+ };
+
+ ehci@0d040000 {
+ compatible = "nintendo,hollywood-ehci";
+ reg = <0x0d040000 0x100
+ 0x133e0000 0x80000>; /* 512 KB */
+ interrupts = <4>;
+ interrupt-parent = <&PIC1>;
+ };
+
+ ohci0@0d050000 {
+ compatible = "nintendo,hollywood-ohci";
+ reg = <0x0d050000 0x100
+ 0x13460000 0x80000>; /* 512 KB */
+ interrupts = <5>;
+ interrupt-parent = <&PIC1>;
+ };
+
+ ohci1@0d060000 {
+ compatible = "nintendo,hollywood-ohci";
+ reg = <0x0d060000 0x100
+ 0x134e0000 0x80000>; /* 512 KB */
+ interrupts = <6>;
+ interrupt-parent = <&PIC1>;
+ };
+
+ sdhc0@0d070000 {
+ compatible = "nintendo,hollywood-sdhci";
+ reg = <0x0d070000 0x200>;
+ interrupts = <7>;
+ interrupt-parent = <&PIC1>;
+ };
+
+ sdhc1@0d080000 {
+ compatible = "nintendo,hollywood-sdhci";
+ reg = <0x0d080000 0x200>;
+ interrupts = <8>;
+ interrupt-parent = <&PIC1>;
+ };
+
+ PIC1: pic1@0d800030 {
+ #interrupt-cells = <1>;
+ compatible = "nintendo,hollywood-pic";
+ reg = <0x0d800030 0x8>;
+ interrupt-controller;
+ interrupts = <14>;
+ interrupt-parent = <&PIC0>;
+ };
+
+ hollywood-ahbprot@0d800064 {
+ compatible = "nintendo,hollywood-ahbprot";
+ reg = <0x0d800064 0x4>;
+ };
+
+ gpio0: hollywood-gpio@0d8000c0 {
+ compatible = "nintendo,hollywood-gpio";
+ reg = <0x0d8000c0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: hollywood-gpio@0d8000e0 {
+ compatible = "nintendo,hollywood-gpio";
+ reg = <0x0d8000e0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hollywood-resets@0d800194 {
+ compatible = "nintendo,hollywood-resets";
+ reg = <0x0d800194 0x4>;
+ };
+
+ i2c-video {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "virtual,i2c-gpio";
+
+ gpios = <&gpio0 16 0 /* 31-15 */
+ &gpio0 17 0 /* 31-14 */
+ >;
+ sda-is-open-drain = <1>;
+ sda-enforce-dir = <1>;
+ scl-is-open-drain = <1>;
+ scl-is-output-only = <1>;
+ udelay = <2>;
+
+ audio-video-encoder {
+ compatible = "nintendo,wii-ave-rvl";
+ reg = <0x70>;
+ };
+ };
+ };
+};
+
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 05/19] powerpc: wii: bootwrapper bits
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-5-git-send-email-albert_herranz@yahoo.es>
Add support for the Nintendo Wii video game console to the powerpc
bootwrapper.
dtbImage.wii is a wrapped image that contains a flat device tree,
an entry point compatible with the Homebrew Channel and BootMii,
and an optional initrd.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/boot/Makefile | 3 +-
arch/powerpc/boot/wii.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/wrapper | 3 +
3 files changed, 178 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/wii.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index b2f06b0..fbaf101 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -77,7 +77,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube.c
+ gamecube.c wii.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -256,6 +256,7 @@ image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
+image-$(CONFIG_WII) += dtbImage.wii
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
diff --git a/arch/powerpc/boot/wii.c b/arch/powerpc/boot/wii.c
new file mode 100644
index 0000000..65b73a1
--- /dev/null
+++ b/arch/powerpc/boot/wii.c
@@ -0,0 +1,173 @@
+/*
+ * arch/powerpc/boot/wii.c
+ *
+ * Nintendo Wii bootwrapper support
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+#include "ugecon.h"
+
+
+BSS_STACK(8192);
+
+/*
+ * We enter with an unknown cache, high BATs and MMU status.
+ *
+ * We enable the MMU with an identity mapped memory scheme as expected
+ * by the start code.
+ *
+ */
+asm ("\n\
+.text\n\
+.globl _zimage_start\n\
+_zimage_start:\n\
+\n\
+ mfmsr 9\n\
+ andi. 0, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */\n\
+ bcl 20, 31, 1f\n\
+1: \n\
+ mflr 8\n\
+ clrlwi 8, 8, 3 /* convert to a real address */\n\
+ addi 8, 8, _mmu_off - 1b\n\
+ andc 9, 9, 0\n\
+ mtspr 0x01a, 8 /* SRR0 */\n\
+ mtspr 0x01b, 9 /* SRR1 */\n\
+ sync\n\
+ rfi\n\
+_mmu_off: \n\
+ /* MMU disabled */\n\
+\n\
+ /* Setup BATs */\n\
+ isync\n\
+ li 8, 0\n\
+ mtspr 0x210, 8 /* IBAT0U */\n\
+ mtspr 0x211, 8 /* IBAT0L */\n\
+ mtspr 0x212, 8 /* IBAT1U */\n\
+ mtspr 0x213, 8 /* IBAT1L */\n\
+ mtspr 0x214, 8 /* IBAT2U */\n\
+ mtspr 0x215, 8 /* IBAT2L */\n\
+ mtspr 0x216, 8 /* IBAT3U */\n\
+ mtspr 0x217, 8 /* IBAT3L */\n\
+ mtspr 0x218, 8 /* DBAT0U */\n\
+ mtspr 0x219, 8 /* DBAT0L */\n\
+ mtspr 0x21a, 8 /* DBAT1U */\n\
+ mtspr 0x21b, 8 /* DBAT1L */\n\
+ mtspr 0x21c, 8 /* DBAT2U */\n\
+ mtspr 0x21d, 8 /* DBAT2L */\n\
+ mtspr 0x21e, 8 /* DBAT3U */\n\
+ mtspr 0x21f, 8 /* DBAT3L */\n\
+\n\
+ mtspr 0x230, 8 /* IBAT4U */\n\
+ mtspr 0x231, 8 /* IBAT4L */\n\
+ mtspr 0x232, 8 /* IBAT5U */\n\
+ mtspr 0x233, 8 /* IBAT5L */\n\
+ mtspr 0x234, 8 /* IBAT6U */\n\
+ mtspr 0x235, 8 /* IBAT6L */\n\
+ mtspr 0x236, 8 /* IBAT7U */\n\
+ mtspr 0x237, 8 /* IBAT7L */\n\
+ mtspr 0x238, 8 /* DBAT4U */\n\
+ mtspr 0x239, 8 /* DBAT4L */\n\
+ mtspr 0x23a, 8 /* DBAT5U */\n\
+ mtspr 0x23b, 8 /* DBAT5L */\n\
+ mtspr 0x23c, 8 /* DBAT6U */\n\
+ mtspr 0x23d, 8 /* DBAT6L */\n\
+ mtspr 0x23e, 8 /* DBAT7U */\n\
+ mtspr 0x23f, 8 /* DBAT7L */\n\
+\n\
+ isync\n\
+ li 8, 0x01ff /* first 16MiB */\n\
+ li 9, 0x0002 /* rw */\n\
+ mtspr 0x210, 8 /* IBAT0U */\n\
+ mtspr 0x211, 9 /* IBAT0L */\n\
+ mtspr 0x218, 8 /* DBAT0U */\n\
+ mtspr 0x219, 9 /* DBAT0L */\n\
+\n\
+ lis 8, 0xcc00 /* I/O mem */\n\
+ ori 8, 8, 0x3ff /* 32MiB */\n\
+ lis 9, 0x0c00\n\
+ ori 9, 9, 0x002a /* uncached, guarded, rw */\n\
+ mtspr 0x21a, 8 /* DBAT1U */\n\
+ mtspr 0x21b, 9 /* DBAT1L */\n\
+\n\
+ lis 8, 0x0100 /* next 8MiB */\n\
+ ori 8, 8, 0x00ff /* 8MiB */\n\
+ lis 9, 0x0100 /* next 8MiB */\n\
+ ori 9, 9, 0x0002 /* rw */\n\
+ mtspr 0x214, 8 /* IBAT2U */\n\
+ mtspr 0x215, 9 /* IBAT2L */\n\
+ mtspr 0x21c, 8 /* DBAT2U */\n\
+ mtspr 0x21d, 9 /* DBAT2L */\n\
+\n\
+ lis 8, 0x1000 /* MEM2 */\n\
+ ori 8, 8, 0x07ff /* 64MiB */\n\
+ lis 9, 0x1000\n\
+ ori 9, 9, 0x0002 /* rw */\n\
+ mtspr 0x216, 8 /* IBAT3U */\n\
+ mtspr 0x217, 9 /* IBAT3L */\n\
+ mtspr 0x21e, 8 /* DBAT3U */\n\
+ mtspr 0x21f, 9 /* DBAT3L */\n\
+\n\
+ sync\n\
+ isync\n\
+\n\
+ /* enable high BATs */\n\
+ lis 8, 0x8200\n\
+ mtspr 0x3f3, 8 /* HID4 */\n\
+\n\
+ /* enable caches */\n\
+ mfspr 8, 0x3f0\n\
+ ori 8, 8, 0xc000\n\
+ mtspr 0x3f0, 8 /* HID0 */\n\
+ isync\n\
+\n\
+ li 3, 0\n\
+ li 4, 0\n\
+ li 5, 0\n\
+\n\
+ bcl 20, 31, 1f\n\
+1: \n\
+ mflr 8\n\
+ addi 8, 8, _mmu_on - 1b\n\
+ mfmsr 9\n\
+ ori 9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */\n\
+ mtspr 0x01a, 8 /* SRR0 */\n\
+ mtspr 0x01b, 9 /* SRR1 */\n\
+ sync\n\
+ rfi\n\
+_mmu_on: \n\
+ /* turn on the front blue led (aka: yay! we got here!) */\n\
+ lis 8, 0xcd00\n\
+ ori 8, 8, 0x00c0\n\
+ lwz 9, 0(8)\n\
+ ori 9, 9, 0x20\n\
+ stw 9, 0(8)\n\
+ b _zimage_start_lib\n\
+");
+
+/*
+ *
+ */
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+ u32 heapsize = 24*1024*1024 - (u32)_end;
+
+ simple_alloc_init(_end, heapsize, 32, 64);
+ fdt_init(_dtb_start);
+
+ if (!ug_grab_io_base() && ug_is_adapter_present())
+ console_ops.write = ug_console_write;
+}
+
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ac9e9a5..0e9ce10 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -230,6 +230,9 @@ xpedite52*)
link_address='0x1400000'
platformo=$object/cuboot-85xx.o
;;
+wii|gamecube)
+ link_address='0x600000'
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 06/19] powerpc: gamecube/wii: introduce GAMECUBE_COMMON
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-6-git-send-email-albert_herranz@yahoo.es>
Add a config option GAMECUBE_COMMON to be used as a dependency for all
options common to the Nintendo GameCube and Wii video game consoles.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/embedded6xx/Kconfig | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 291ac9d..97a2dbc 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -90,3 +90,7 @@ config MPC10X_OPENPIC
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
+
+config GAMECUBE_COMMON
+ bool
+
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 07/19] powerpc: gamecube/wii: declare as non-coherent platforms
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-7-git-send-email-albert_herranz@yahoo.es>
The processors bundled in the Nintendo GameCube and Wii video game consoles
require explicit cache handling when DMA engines are used.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/Kconfig.cputype | 2 +-
arch/powerpc/platforms/embedded6xx/Kconfig | 1 +
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e382cae..80d934b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -312,7 +312,7 @@ config NR_CPUS
config NOT_COHERENT_CACHE
bool
- depends on 4xx || 8xx || E200 || PPC_MPC512x
+ depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
default y
config CHECK_CACHE_COHERENCY
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 97a2dbc..31487e4 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -93,4 +93,5 @@ config MPC10X_STORE_GATHERING
config GAMECUBE_COMMON
bool
+ select NOT_COHERENT_CACHE
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 08/19] powerpc: gamecube/wii: do not include PCI support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-8-git-send-email-albert_herranz@yahoo.es>
The Nintendo GameCube and Wii video game consoles do not have PCI hardware.
Avoid wasting their scarce memory by not including PCI support into the
kernel.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2ba14e7..84b2566 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -679,7 +679,7 @@ config PPC_PCI_CHOICE
config PCI
bool "PCI support" if PPC_PCI_CHOICE
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
- && !PPC_85xx && !PPC_86xx
+ && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
select ARCH_SUPPORTS_MSI
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 09/19] powerpc: gamecube/wii: udbg support for usbgecko
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-9-git-send-email-albert_herranz@yahoo.es>
Add support for using the USB Gecko adapter via the udbg facility on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/embedded6xx/Kconfig | 13 +
arch/powerpc/platforms/embedded6xx/Makefile | 1 +
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 285 ++++++++++++++++++++
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h | 30 ++
4 files changed, 329 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
create mode 100644 arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 31487e4..bfd88be 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -95,3 +95,16 @@ config GAMECUBE_COMMON
bool
select NOT_COHERENT_CACHE
+config USBGECKO_UDBG
+ bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
+ depends on GAMECUBE_COMMON
+ help
+ If you say yes to this option, support will be included for the
+ USB Gecko adapter as an udbg console.
+ The USB Gecko is a EXI to USB Serial converter that can be plugged
+ into a memcard slot in the Nintendo GameCube/Wii.
+
+ This driver bypasses the EXI layer completely.
+
+ If in doubt, say N here.
+
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 0773c08..0ab7492 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
obj-$(CONFIG_PPC_C2K) += c2k.o
+obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
new file mode 100644
index 0000000..49f86e8
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
@@ -0,0 +1,285 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
+ *
+ * udbg serial input/output routines for the USB Gecko adapter.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+
+#include <mm/mmu_decl.h>
+
+#include "usbgecko_udbg.h"
+
+
+#define EXI_CLK_32MHZ 5
+
+#define EXI_CSR 0x00
+#define EXI_CSR_CLKMASK (0x7<<4)
+#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4)
+#define EXI_CSR_CSMASK (0x7<<7)
+#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */
+
+#define EXI_CR 0x0c
+#define EXI_CR_TSTART (1<<0)
+#define EXI_CR_WRITE (1<<2)
+#define EXI_CR_READ_WRITE (2<<2)
+#define EXI_CR_TLEN(len) (((len)-1)<<4)
+
+#define EXI_DATA 0x10
+
+#define UG_READ_ATTEMPTS 100
+#define UG_WRITE_ATTEMPTS 100
+
+
+static void __iomem *ug_io_base;
+
+/*
+ * Performs one input/output transaction between the exi host and the usbgecko.
+ */
+static u32 ug_io_transaction(u32 in)
+{
+ u32 __iomem *csr_reg = ug_io_base + EXI_CSR;
+ u32 __iomem *data_reg = ug_io_base + EXI_DATA;
+ u32 __iomem *cr_reg = ug_io_base + EXI_CR;
+ u32 csr, data, cr;
+
+ /* select */
+ csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
+ out_be32(csr_reg, csr);
+
+ /* read/write */
+ data = in;
+ out_be32(data_reg, data);
+ cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
+ out_be32(cr_reg, cr);
+
+ while (in_be32(cr_reg) & EXI_CR_TSTART)
+ barrier();
+
+ /* deselect */
+ out_be32(csr_reg, 0);
+
+ /* result */
+ data = in_be32(data_reg);
+
+ return data;
+}
+
+/*
+ * Returns true if an usbgecko adapter is found.
+ */
+static int ug_is_adapter_present(void)
+{
+ if (!ug_io_base)
+ return 0;
+
+ return ug_io_transaction(0x90000000) == 0x04700000;
+}
+
+/*
+ * Returns true if the TX fifo is ready for transmission.
+ */
+static int ug_is_txfifo_ready(void)
+{
+ return ug_io_transaction(0xc0000000) & 0x04000000;
+}
+
+/*
+ * Tries to transmit a character.
+ * If the TX fifo is not ready the result is undefined.
+ */
+static void ug_raw_putc(char ch)
+{
+ ug_io_transaction(0xb0000000 | (ch << 20));
+}
+
+/*
+ * Transmits a character.
+ * It silently fails if the TX fifo is not ready after a number of retries.
+ */
+static void ug_putc(char ch)
+{
+ int count = UG_WRITE_ATTEMPTS;
+
+ if (!ug_io_base)
+ return;
+
+ if (ch == '\n')
+ ug_putc('\r');
+
+ while (!ug_is_txfifo_ready() && count--)
+ barrier();
+ if (count)
+ ug_raw_putc(ch);
+}
+
+#if 0
+/*
+ * Trasmits a null terminated character string.
+ */
+static void ug_puts(char *s)
+{
+ while (*s)
+ ug_putc(*s++);
+}
+#endif
+
+/*
+ * Returns true if the RX fifo is ready for transmission.
+ */
+static int ug_is_rxfifo_ready(void)
+{
+ return ug_io_transaction(0xd0000000) & 0x04000000;
+}
+
+/*
+ * Tries to receive a character.
+ * If a character is unavailable the function returns -1.
+ */
+static int ug_raw_getc(void)
+{
+ u32 data = ug_io_transaction(0xa0000000);
+ if (data & 0x08000000)
+ return (data >> 16) & 0xff;
+ else
+ return -1;
+}
+
+/*
+ * Receives a character.
+ * It fails if the RX fifo is not ready after a number of retries.
+ */
+static int ug_getc(void)
+{
+ int count = UG_READ_ATTEMPTS;
+
+ if (!ug_io_base)
+ return -1;
+
+ while (!ug_is_rxfifo_ready() && count--)
+ barrier();
+ return ug_raw_getc();
+}
+
+/*
+ * udbg functions.
+ *
+ */
+
+/*
+ * Transmits a character.
+ */
+void ug_udbg_putc(char ch)
+{
+ ug_putc(ch);
+}
+
+/*
+ * Receives a character. Waits until a character is available.
+ */
+static int ug_udbg_getc(void)
+{
+ int ch;
+
+ while ((ch = ug_getc()) == -1)
+ barrier();
+ return ch;
+}
+
+/*
+ * Receives a character. If a character is not available, returns -1.
+ */
+static int ug_udbg_getc_poll(void)
+{
+ if (!ug_is_rxfifo_ready())
+ return -1;
+ return ug_getc();
+}
+
+/*
+ * Retrieves and prepares the virtual address needed to access the hardware.
+ */
+static void __iomem *ug_udbg_setup_io_base(struct device_node *np)
+{
+ phys_addr_t paddr;
+ const unsigned int *reg;
+
+ reg = of_get_property(np, "reg", NULL);
+ if (reg) {
+ paddr = of_translate_address(np, reg);
+ if (paddr) {
+ ug_io_base = ioremap(paddr, reg[1]);
+ return ug_io_base;
+ }
+ }
+ return NULL;
+}
+
+/*
+ * USB Gecko udbg support initialization.
+ */
+void __init ug_udbg_init(void)
+{
+ struct device_node *np = NULL;
+ struct device_node *stdout;
+ const char *path;
+
+ if (!of_chosen) {
+ udbg_printf("%s: missing of_chosen\n", __func__);
+ goto done;
+ }
+
+ path = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (!path) {
+ udbg_printf("%s: missing %s property", __func__,
+ "linux,stdout-path");
+ goto done;
+ }
+
+ stdout = of_find_node_by_path(path);
+ if (!stdout) {
+ udbg_printf("%s: missing path %s", __func__, path);
+ goto done;
+ }
+
+ for (np = NULL;
+ (np = of_find_compatible_node(np, NULL, "usbgecko,usbgecko"));)
+ if (np == stdout)
+ break;
+
+ of_node_put(stdout);
+ if (!np) {
+ udbg_printf("%s: stdout is not an usbgecko", __func__);
+ goto done;
+ }
+
+ if (!ug_udbg_setup_io_base(np)) {
+ udbg_printf("%s: failed to setup io base", __func__);
+ goto done;
+ }
+
+ if (!ug_is_adapter_present()) {
+ udbg_printf("usbgecko_udbg: not found\n");
+ ug_io_base = NULL;
+ } else {
+ udbg_putc = ug_udbg_putc;
+ udbg_getc = ug_udbg_getc;
+ udbg_getc_poll = ug_udbg_getc_poll;
+ udbg_printf("usbgecko_udbg: ready\n");
+ }
+
+done:
+ if (np)
+ of_node_put(np);
+ return;
+}
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
new file mode 100644
index 0000000..3929de3
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
@@ -0,0 +1,30 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
+ *
+ * udbg serial input/output routines for the USB Gecko adapter.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __USBGECKO_UDBG_H
+#define __USBGECKO_UDBG_H
+
+#ifdef CONFIG_USBGECKO_UDBG
+
+extern void __init ug_udbg_init(void);
+
+#else
+
+static inline void __init ug_udbg_init(void)
+{
+}
+
+#endif /* CONFIG_USBGECKO_UDBG */
+
+#endif /* __USBGECKO_UDBG_H */
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 10/19] powerpc: gamecube/wii: early debugging using usbgecko
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-10-git-send-email-albert_herranz@yahoo.es>
Add support for using the USB Gecko adapter as an early debugging
console on the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/Kconfig.debug | 8 +++++
arch/powerpc/include/asm/udbg.h | 1 +
arch/powerpc/kernel/head_32.S | 21 ++++++++++++
arch/powerpc/kernel/udbg.c | 2 +
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 33 ++++++++++++++++++++
arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h | 6 +++
6 files changed, 71 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3b10051..11e385b 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM
using a CPM-based serial port. This assumes that the bootwrapper
has run, and set up the CPM in a particular way.
+config PPC_EARLY_DEBUG_USBGECKO
+ bool "Early debugging through the USB Gecko adapter"
+ depends on GAMECUBE_COMMON
+ select USBGECKO_UDBG
+ help
+ Select this to enable early debugging for Nintendo GameCube/Wii
+ consoles via an external USB Gecko adapter.
+
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index cd21e5e..11ae699 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void);
extern void __init udbg_init_44x_as1(void);
extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
+extern void __init udbg_init_usbgecko(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 829c3fe..83a0b79 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -164,6 +164,9 @@ __after_mmu_off:
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
bl setup_cpm_bat
#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+ bl setup_usbgecko_bat
+#endif
/*
* Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1203,6 +1206,24 @@ setup_cpm_bat:
blr
#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+setup_usbgecko_bat:
+ /* prepare a BAT for early io */
+ lis r8, 0x0c00
+ ori r8, r8, 0x002a /* uncached, guarded ,rw */
+ lis r11, 0xcc00
+ ori r11, r11, 0x3 /* 128K */
+#ifdef CONFIG_WII
+ oris r8, r8, 0x0100
+ oris r11, r11, 0x0100
+#endif
+ mtspr SPRN_DBAT1L, r8
+ mtspr SPRN_DBAT1U, r11
+ sync
+ isync
+ blr
+#endif
+
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
* We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index fc9af47..e39cad8 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -60,6 +60,8 @@ void __init udbg_early_init(void)
udbg_init_40x_realmode();
#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
udbg_init_cpm();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
+ udbg_init_usbgecko();
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
index 49f86e8..9f5e7ed 100644
--- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
@@ -234,6 +234,9 @@ void __init ug_udbg_init(void)
struct device_node *stdout;
const char *path;
+ if (ug_io_base)
+ udbg_printf("%s: early -> final\n", __func__);
+
if (!of_chosen) {
udbg_printf("%s: missing of_chosen\n", __func__);
goto done;
@@ -283,3 +286,33 @@ done:
of_node_put(np);
return;
}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+
+/*
+ * USB Gecko early debug support initialization for udbg.
+ *
+ */
+void __init udbg_init_usbgecko(void)
+{
+ unsigned long vaddr, paddr;
+
+#if defined(CONFIG_GAMECUBE)
+ paddr = 0x0c000000;
+#elif defined(CONFIG_WII)
+ paddr = 0x0d000000;
+#else
+#error Invalid platform for USB Gecko based early debugging.
+#endif
+
+ vaddr = 0xc0000000 | paddr;
+ setbat(1, vaddr, paddr, 128*1024, PAGE_KERNEL_NCG);
+
+ ug_io_base = (void __iomem *)(vaddr | 0x6814);
+
+ udbg_putc = ug_udbg_putc;
+ udbg_getc = ug_udbg_getc;
+ udbg_getc_poll = ug_udbg_getc_poll;
+}
+
+#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
index 3929de3..98034ee 100644
--- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
@@ -27,4 +27,10 @@ static inline void __init ug_udbg_init(void)
#endif /* CONFIG_USBGECKO_UDBG */
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+
+void __init udbg_init_usbgecko(void);
+
+#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */
+
#endif /* __USBGECKO_UDBG_H */
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 11/19] powerpc: gamecube/wii: flipper interrupt controller support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-11-git-send-email-albert_herranz@yahoo.es>
Add support for the interrupt controller included in the "Flipper"
chipset of the Nintendo GameCube video game console.
The same interrupt controller is also present in the "Hollywood" chipset
of the Nintendo Wii.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/embedded6xx/Kconfig | 6 +
arch/powerpc/platforms/embedded6xx/Makefile | 1 +
arch/powerpc/platforms/embedded6xx/flipper-pic.c | 247 ++++++++++++++++++++++
arch/powerpc/platforms/embedded6xx/flipper-pic.h | 25 +++
4 files changed, 279 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/embedded6xx/flipper-pic.c
create mode 100644 arch/powerpc/platforms/embedded6xx/flipper-pic.h
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index bfd88be..29a98c6 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -94,6 +94,7 @@ config MPC10X_STORE_GATHERING
config GAMECUBE_COMMON
bool
select NOT_COHERENT_CACHE
+ select FLIPPER_PIC
config USBGECKO_UDBG
bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
@@ -108,3 +109,8 @@ config USBGECKO_UDBG
If in doubt, say N here.
+config FLIPPER_PIC
+ bool
+ depends on GAMECUBE_COMMON
+ default y
+
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 0ab7492..35258fd 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PPC_HOLLY) += holly.o
obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
+obj-$(CONFIG_FLIPPER_PIC) += flipper-pic.o
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
new file mode 100644
index 0000000..98c2e9f
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -0,0 +1,247 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.c
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+#define DRV_MODULE_NAME "flipper-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/io.h>
+
+#include "flipper-pic.h"
+
+#define FLIPPER_NR_IRQS 32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves asserting/clearing
+ * the corresponding bit in IMR. ACK'ing a request simply involves
+ * asserting the corresponding bit in ICR.
+ */
+#define FLIPPER_ICR 0x00
+#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */
+
+#define FLIPPER_IMR 0x04
+
+#define FLIPPER_RESET 0x24
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void flipper_pic_mask_and_ack(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ clear_bit(irq, io_base + FLIPPER_IMR);
+ set_bit(irq, io_base + FLIPPER_ICR);
+}
+
+static void flipper_pic_ack(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ set_bit(irq, io_base + FLIPPER_ICR);
+}
+
+static void flipper_pic_mask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ clear_bit(irq, io_base + FLIPPER_IMR);
+}
+
+static void flipper_pic_unmask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ set_bit(irq, io_base + FLIPPER_IMR);
+}
+
+
+static struct irq_chip flipper_pic = {
+ .typename = "flipper-pic",
+ .ack = flipper_pic_ack,
+ .mask_ack = flipper_pic_mask_and_ack,
+ .mask = flipper_pic_mask,
+ .unmask = flipper_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_host *flipper_irq_host;
+
+static int flipper_pic_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ set_irq_chip_data(virq, h->host_data);
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq);
+ return 0;
+}
+
+static void flipper_pic_unmap(struct irq_host *h, unsigned int irq)
+{
+ set_irq_chip_data(irq, NULL);
+ set_irq_chip(irq, NULL);
+}
+
+static int flipper_pic_match(struct irq_host *h, struct device_node *np)
+{
+ return 1;
+}
+
+
+static struct irq_host_ops flipper_irq_host_ops = {
+ .map = flipper_pic_map,
+ .unmap = flipper_pic_unmap,
+ .match = flipper_pic_match,
+};
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __flipper_quiesce(void __iomem *io_base)
+{
+ /* mask and ack all IRQs */
+ out_be32(io_base + FLIPPER_IMR, 0x00000000);
+ out_be32(io_base + FLIPPER_ICR, 0xffffffff);
+}
+
+struct irq_host * __init flipper_pic_init(struct device_node *np)
+{
+ struct irq_host *irq_host;
+ struct resource res;
+ void __iomem *io_base;
+ int retval;
+
+ retval = of_address_to_resource(np, 0, &res);
+ if (retval) {
+ pr_err("no io memory range found\n");
+ return NULL;
+ }
+ io_base = ioremap(res.start, res.end - res.start + 1);
+
+ pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+
+ __flipper_quiesce(io_base);
+
+ irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS,
+ &flipper_irq_host_ops, -1);
+ if (!irq_host) {
+ pr_err("failed to allocate irq_host\n");
+ return NULL;
+ }
+
+ irq_host->host_data = io_base;
+
+ return irq_host;
+}
+
+unsigned int flipper_pic_get_irq(void)
+{
+ void __iomem *io_base = flipper_irq_host->host_data;
+ int irq;
+ u32 irq_status;
+
+ irq_status = in_be32(io_base + FLIPPER_ICR) &
+ in_be32(io_base + FLIPPER_IMR);
+ if (irq_status == 0)
+ return -1; /* no more IRQs pending */
+
+ __asm__ __volatile__("cntlzw %0,%1" : "=r"(irq) : "r"(irq_status));
+ return irq_linear_revmap(flipper_irq_host, 31 - irq);
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void __init flipper_pic_probe(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic");
+ BUG_ON(!np);
+
+ flipper_irq_host = flipper_pic_init(np);
+ BUG_ON(!flipper_irq_host);
+
+ irq_set_default_host(flipper_irq_host);
+
+ of_node_put(np);
+}
+
+/*
+ * Misc functions related to the flipper chipset.
+ *
+ */
+
+/**
+ * flipper_quiesce() - quiesce flipper irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void flipper_quiesce(void)
+{
+ void __iomem *io_base = flipper_irq_host->host_data;
+
+ __flipper_quiesce(io_base);
+}
+
+/*
+ * Resets the platform.
+ */
+void flipper_platform_reset(void)
+{
+ void __iomem *io_base;
+
+ if (flipper_irq_host && flipper_irq_host->host_data) {
+ io_base = flipper_irq_host->host_data;
+ out_8(io_base + FLIPPER_RESET, 0x00);
+ }
+}
+
+/*
+ * Returns non-zero if the reset button is pressed.
+ */
+int flipper_is_reset_button_pressed(void)
+{
+ void __iomem *io_base;
+ u32 icr;
+
+ if (flipper_irq_host && flipper_irq_host->host_data) {
+ io_base = flipper_irq_host->host_data;
+ icr = in_be32(io_base + FLIPPER_ICR);
+ return !(icr & FLIPPER_ICR_RSS);
+ }
+ return 0;
+}
+
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/arch/powerpc/platforms/embedded6xx/flipper-pic.h
new file mode 100644
index 0000000..e339186
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.h
@@ -0,0 +1,25 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.h
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __FLIPPER_PIC_H
+#define __FLIPPER_PIC_H
+
+unsigned int flipper_pic_get_irq(void);
+void __init flipper_pic_probe(void);
+
+void flipper_quiesce(void);
+void flipper_platform_reset(void);
+int flipper_is_reset_button_pressed(void);
+
+#endif
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 12/19] powerpc: gamecube: platform support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-12-git-send-email-albert_herranz@yahoo.es>
Add platform support for the Nintendo GameCube video game console.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/embedded6xx/Kconfig | 8 ++
arch/powerpc/platforms/embedded6xx/Makefile | 1 +
arch/powerpc/platforms/embedded6xx/gamecube.c | 112 +++++++++++++++++++++
arch/powerpc/platforms/embedded6xx/gamecube_dev.c | 34 ++++++
4 files changed, 155 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/embedded6xx/gamecube.c
create mode 100644 arch/powerpc/platforms/embedded6xx/gamecube_dev.c
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 29a98c6..efb2ea1 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -114,3 +114,11 @@ config FLIPPER_PIC
depends on GAMECUBE_COMMON
default y
+config GAMECUBE
+ bool "Nintendo-GameCube"
+ depends on EMBEDDED6xx
+ select GAMECUBE_COMMON
+ help
+ Select GAMECUBE if configuring for the Nintendo GameCube.
+ More information at: <http://gc-linux.sourceforge.net/>
+
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 35258fd..b0324ed 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_FLIPPER_PIC) += flipper-pic.o
+obj-$(CONFIG_GAMECUBE) += gamecube.o gamecube_dev.o
diff --git a/arch/powerpc/platforms/embedded6xx/gamecube.c b/arch/powerpc/platforms/embedded6xx/gamecube.c
new file mode 100644
index 0000000..8045a23
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/gamecube.c
@@ -0,0 +1,112 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/gamecube.c
+ *
+ * Nintendo GameCube board-specific support
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kexec.h>
+#include <linux/seq_file.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "flipper-pic.h"
+#include "usbgecko_udbg.h"
+
+
+static void gamecube_restart(char *cmd)
+{
+ local_irq_disable();
+ flipper_platform_reset();
+ /* spin until power button pressed */
+ for (;;)
+ cpu_relax();
+}
+
+static void gamecube_power_off(void)
+{
+ local_irq_disable();
+ /* spin until power button pressed */
+ for (;;)
+ cpu_relax();
+}
+
+static void gamecube_halt(void)
+{
+ gamecube_restart(NULL);
+}
+
+static void gamecube_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: Nintendo GameCube\n");
+}
+
+static void gamecube_setup_arch(void)
+{
+ /* currently not used */
+}
+
+static void __init gamecube_init_early(void)
+{
+ ug_udbg_init();
+}
+
+static int __init gamecube_probe(void)
+{
+ unsigned long dt_root;
+
+ dt_root = of_get_flat_dt_root();
+ if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube"))
+ return 0;
+
+ return 1;
+}
+
+static void gamecube_shutdown(void)
+{
+ /* currently not used */
+}
+
+#ifdef CONFIG_KEXEC
+static int gamecube_kexec_prepare(struct kimage *image)
+{
+ return 0;
+}
+#endif /* CONFIG_KEXEC */
+
+
+define_machine(gamecube) {
+ .name = "gamecube",
+ .probe = gamecube_probe,
+ .setup_arch = gamecube_setup_arch,
+ .init_early = gamecube_init_early,
+ .show_cpuinfo = gamecube_show_cpuinfo,
+ .restart = gamecube_restart,
+ .power_off = gamecube_power_off,
+ .halt = gamecube_halt,
+ .init_IRQ = flipper_pic_probe,
+ .get_irq = flipper_pic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+ .machine_shutdown = gamecube_shutdown,
+#ifdef CONFIG_KEXEC
+ .machine_kexec_prepare = gamecube_kexec_prepare,
+ .machine_kexec = default_machine_kexec,
+#endif
+};
+
diff --git a/arch/powerpc/platforms/embedded6xx/gamecube_dev.c b/arch/powerpc/platforms/embedded6xx/gamecube_dev.c
new file mode 100644
index 0000000..13e1f73
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/gamecube_dev.c
@@ -0,0 +1,34 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/gamecube_dev.c
+ *
+ * Nintendo GameCube platform device setup.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+
+static struct of_device_id gamecube_of_bus[] = {
+ { .compatible = "nintendo,flipper", },
+ { },
+};
+
+static int __init gamecube_device_probe(void)
+{
+ if (!machine_is(gamecube))
+ return 0;
+
+ of_platform_bus_probe(NULL, gamecube_of_bus, NULL);
+ return 0;
+}
+device_initcall(gamecube_device_probe);
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 13/19] powerpc: gamecube: default config
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-13-git-send-email-albert_herranz@yahoo.es>
Add a default configuration for the Nintendo GameCube video game console.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/configs/gamecube_defconfig | 1061 +++++++++++++++++++++++++++++++
1 files changed, 1061 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/gamecube_defconfig
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
new file mode 100644
index 0000000..942e119
--- /dev/null
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -0,0 +1,1061 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Sun Nov 22 21:07:30 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-gcn"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+# CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
+CONFIG_GAMECUBE_COMMON=y
+CONFIG_USBGECKO_UDBG=y
+CONFIG_FLIPPER_PIC=y
+CONFIG_GAMECUBE=y
+# CONFIG_WII is not set
+# CONFIG_AMIGAONE is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+# CONFIG_CONSISTENT_SIZE_BOOL is not set
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_OF is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PPC=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_GENERIC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+CONFIG_SCHED_TRACER=y
+CONFIG_BOOT_TRACER=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+CONFIG_DMA_API_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+CONFIG_PPC_EARLY_DEBUG_USBGECKO=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 14/19] powerpc: allow ioremap within reserved fake ram regions
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-14-git-send-email-albert_herranz@yahoo.es>
The Nintendo Wii has two discontiguous RAM memory areas called
MEM1 and MEM2.
MEM1 starts at 0x00000000 and contains 24MB of 1T-SRAM.
MEM2 starts at 0x10000000 and contains 64MB of DDR2 RAM.
Between both memory address ranges there is an address space
where memory-mapped I/O registers are found.
Currently, Linux 32-bit PowerPC does not support RAM in
discontiguous memory address spaces. Thus, in order to use
both RAM areas, we declare as RAM the range from the start of
MEM1 to the end of useable MEM2 and exclude the needed parts
with /memreserve/ statements, at the expense of wasting a bit
of memory.
As a side effect, we need to allow ioremapping RAM areas
because the I/O address space sits within the memreserve'd part
of the declared RAM region.
Note that this is not safe if the region ioremapped is covered
by an existing BAT mapping used to map RAM, so this is
specifically banned here.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/mm/pgtable_32.c | 19 ++++++++++++++++---
1 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index cb96cb2..ba00cb1 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -191,9 +191,22 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
* Don't allow anybody to remap normal RAM that we're using.
* mem_init() sets high_memory so only do the check after that.
*/
- if (mem_init_done && (p < virt_to_phys(high_memory))) {
- printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
- (unsigned long long)p, __builtin_return_address(0));
+ if (mem_init_done && (p < virt_to_phys(high_memory))
+#ifdef CONFIG_WII
+ /*
+ * On some systems, though, we may want to remap an area
+ * declared as normal RAM that we have memreserve'd at the
+ * device tree. See wii.dts.
+ * But we can't do that safely if we are using BATs to map
+ * part of that area.
+ */
+ && !__map_without_bats
+#endif
+ ) {
+ printk(KERN_WARNING
+ "__ioremap(): phys addr 0x%llx is RAM lr %p\n",
+ (unsigned long long)p,
+ __builtin_return_address(0));
return NULL;
}
#endif
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 15/19] powerpc: broadway processor support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-15-git-send-email-albert_herranz@yahoo.es>
This patch extends the cputable entry of the 750CL to also match
the 750CL-based "Broadway" cpu found on the Nintendo Wii.
As of this patch, the following "Broadway" design revision levels have
been seen in the wild:
- DD1.2 (87102)
- DD2.0 (87200)
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/kernel/cputable.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 03c862b..85841e8 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -697,13 +697,13 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_generic,
.platform = "ppc750",
},
- { /* 750CL */
- .pvr_mask = 0xfffff0f0,
- .pvr_value = 0x00087010,
- .cpu_name = "750CL",
- .cpu_features = CPU_FTRS_750CL,
+ { /* 745/755 */
+ .pvr_mask = 0xfffff000,
+ .pvr_value = 0x00083000,
+ .cpu_name = "745/755",
+ .cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
- .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -711,16 +711,14 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
- .oprofile_cpu_type = "ppc/750",
- .oprofile_type = PPC_OPROFILE_G4,
},
- { /* 745/755 */
- .pvr_mask = 0xfffff000,
- .pvr_value = 0x00083000,
- .cpu_name = "745/755",
- .cpu_features = CPU_FTRS_750,
+ { /* 750CL (and "Broadway") */
+ .pvr_mask = 0xfffff0e0,
+ .pvr_value = 0x00087000,
+ .cpu_name = "750CL",
+ .cpu_features = CPU_FTRS_750CL,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -728,6 +726,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750FX rev 1.x */
.pvr_mask = 0xffffff00,
--
1.6.3.3
^ permalink raw reply related
* [RFC PATCH 16/19] powerpc: wii: hollywood interrupt controller support
From: Albert Herranz @ 2009-11-22 22:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Albert Herranz
In-Reply-To: <1258927311-4340-16-git-send-email-albert_herranz@yahoo.es>
Add support for the dual interrupt controller included in the "Hollywood"
chipset of the Nintendo Wii video game console.
This interrupt controller serves both the Broadway processor (as a cascade)
and the Starlet processor, and is used to manage interrupts for the
non-classic hardware.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
---
arch/powerpc/platforms/embedded6xx/Kconfig | 5 +
arch/powerpc/platforms/embedded6xx/Makefile | 1 +
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 238 +++++++++++++++++++++++++
arch/powerpc/platforms/embedded6xx/hlwd-pic.h | 22 +++
4 files changed, 266 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/embedded6xx/hlwd-pic.c
create mode 100644 arch/powerpc/platforms/embedded6xx/hlwd-pic.h
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index efb2ea1..490f89e 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -122,3 +122,8 @@ config GAMECUBE
Select GAMECUBE if configuring for the Nintendo GameCube.
More information at: <http://gc-linux.sourceforge.net/>
+config HLWD_PIC
+ bool
+ depends on STARLET_MINI
+ default y
+
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index b0324ed..c1dcc54 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_FLIPPER_PIC) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o gamecube_dev.o
+obj-$(CONFIG_HLWD_PIC) += hlwd-pic.o
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
new file mode 100644
index 0000000..b024800
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -0,0 +1,238 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+#define DRV_MODULE_NAME "hlwd-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/io.h>
+
+#include "hlwd-pic.h"
+
+#define HLWD_NR_IRQS 32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves asserting/clearing
+ * the corresponding bit in IMR. ACK'ing a request simply involves
+ * asserting the corresponding bit in ICR.
+ */
+#define HW_BROADWAY_ICR 0x00
+#define HW_BROADWAY_IMR 0x04
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void hlwd_pic_mask_and_ack(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ clear_bit(irq, io_base + HW_BROADWAY_IMR);
+ set_bit(irq, io_base + HW_BROADWAY_ICR);
+}
+
+static void hlwd_pic_ack(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ set_bit(irq, io_base + HW_BROADWAY_ICR);
+}
+
+static void hlwd_pic_mask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ clear_bit(irq, io_base + HW_BROADWAY_IMR);
+}
+
+static void hlwd_pic_unmask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void __iomem *io_base = get_irq_chip_data(virq);
+
+ set_bit(irq, io_base + HW_BROADWAY_IMR);
+}
+
+
+static struct irq_chip hlwd_pic = {
+ .typename = "hlwd-pic",
+ .ack = hlwd_pic_ack,
+ .mask_ack = hlwd_pic_mask_and_ack,
+ .mask = hlwd_pic_mask,
+ .unmask = hlwd_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_host *hlwd_irq_host;
+
+static int hlwd_pic_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ set_irq_chip_data(virq, h->host_data);
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq);
+ return 0;
+}
+
+static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq)
+{
+ set_irq_chip_data(irq, NULL);
+ set_irq_chip(irq, NULL);
+}
+
+static struct irq_host_ops hlwd_irq_host_ops = {
+ .map = hlwd_pic_map,
+ .unmap = hlwd_pic_unmap,
+};
+
+static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
+{
+ void __iomem *io_base = h->host_data;
+ int irq;
+ u32 irq_status;
+
+ irq_status = in_be32(io_base + HW_BROADWAY_ICR) &
+ in_be32(io_base + HW_BROADWAY_IMR);
+ if (irq_status == 0)
+ return NO_IRQ_IGNORE; /* no more IRQs pending */
+
+ __asm__ __volatile__("cntlzw %0,%1" : "=r"(irq) : "r"(irq_status));
+ return irq_linear_revmap(h, 31 - irq);
+}
+
+static void hlwd_pic_irq_cascade(unsigned int cascade_virq,
+ struct irq_desc *desc)
+{
+ struct irq_host *irq_host = get_irq_data(cascade_virq);
+ unsigned int virq;
+
+ spin_lock(&desc->lock);
+ desc->chip->mask(cascade_virq); /* IRQ_LEVEL */
+ spin_unlock(&desc->lock);
+
+ virq = __hlwd_pic_get_irq(irq_host);
+ if (virq != NO_IRQ_IGNORE)
+ generic_handle_irq(virq);
+ else
+ pr_err("spurious interrupt!\n");
+
+ spin_lock(&desc->lock);
+ desc->chip->ack(cascade_virq); /* IRQ_LEVEL */
+ if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+ desc->chip->unmask(cascade_virq);
+ spin_unlock(&desc->lock);
+}
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __hlwd_quiesce(void __iomem *io_base)
+{
+ /* mask and ack all IRQs */
+ out_be32(io_base + HW_BROADWAY_IMR, 0);
+ out_be32(io_base + HW_BROADWAY_ICR, ~0);
+}
+
+struct irq_host *hlwd_pic_init(struct device_node *np)
+{
+ struct irq_host *irq_host;
+ struct resource res;
+ void __iomem *io_base;
+ int retval;
+
+ retval = of_address_to_resource(np, 0, &res);
+ if (retval) {
+ pr_err("no io memory range found\n");
+ return NULL;
+ }
+ io_base = ioremap(res.start, resource_size(&res));
+ if (!io_base) {
+ pr_err("ioremap failed\n");
+ return NULL;
+ }
+
+ pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+
+ __hlwd_quiesce(io_base);
+
+ irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS,
+ &hlwd_irq_host_ops, NO_IRQ_IGNORE);
+ if (!irq_host) {
+ pr_err("failed to allocate irq_host\n");
+ return NULL;
+ }
+ irq_host->host_data = io_base;
+
+ return irq_host;
+}
+
+unsigned int hlwd_pic_get_irq(void)
+{
+ return __hlwd_pic_get_irq(hlwd_irq_host);
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void hlwd_pic_probe(void)
+{
+ struct irq_host *host;
+ struct device_node *np;
+ const u32 *interrupts;
+ int cascade_virq;
+
+ for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") {
+ interrupts = of_get_property(np, "interrupts", NULL);
+ if (interrupts) {
+ host = hlwd_pic_init(np);
+ BUG_ON(!host);
+ cascade_virq = irq_of_parse_and_map(np, 0);
+ set_irq_data(cascade_virq, host);
+ set_irq_chained_handler(cascade_virq,
+ hlwd_pic_irq_cascade);
+ }
+ }
+}
+
+/**
+ * hlwd_quiesce() - quiesce hollywood irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void hlwd_quiesce(void)
+{
+ void __iomem *io_base = hlwd_irq_host->host_data;
+
+ __hlwd_quiesce(io_base);
+}
+
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h
new file mode 100644
index 0000000..d2e5a09
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h
@@ -0,0 +1,22 @@
+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.h
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __HLWD_PIC_H
+#define __HLWD_PIC_H
+
+extern unsigned int hlwd_pic_get_irq(void);
+extern void hlwd_pic_probe(void);
+extern void hlwd_quiesce(void);
+
+#endif
--
1.6.3.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox