* [PATCH 5/5] of/irq: merge of_irq_map_one()
From: Grant Likely @ 2010-06-04 21:21 UTC (permalink / raw)
Cc: Stephen Rothwell, Michal Simek, microblaze-uclinux,
devicetree-discuss, linuxppc-dev
In-Reply-To: <20100604212134.10552.70717.stgit@angua>
Merge common implementation of of_irq_map_one(). Rename it to
__of_irq_map_one() so that arch code can either use the stock
implementation, or override it to handle platform quirks.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: devicetree-discuss@lists.ozlabs.org
---
arch/microblaze/include/asm/prom.h | 3 -
arch/microblaze/kernel/prom_parse.c | 73 ------------------------------
arch/powerpc/include/asm/prom.h | 3 -
arch/powerpc/kernel/prom_parse.c | 55 -----------------------
drivers/of/irq.c | 85 +++++++++++++++++++++++++++++++++++
include/linux/of_irq.h | 6 ++
6 files changed, 91 insertions(+), 134 deletions(-)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 89fca70..3659930 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -107,9 +107,6 @@ extern const void *of_get_mac_address(struct device_node *np);
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-extern int of_irq_to_resource(struct device_node *dev, int index,
- struct resource *r);
-
/**
* of_iomap - Maps the memory mapped IO for a given device_node
* @device: the device whose io range will be mapped
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 02ec946..70c0471 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -656,49 +656,7 @@ struct device_node *of_irq_find_parent_by_phandle(phandle p)
int of_irq_map_one(struct device_node *device,
int index, struct of_irq *out_irq)
{
- struct device_node *p;
- const u32 *intspec, *tmp, *addr;
- u32 intsize, intlen;
- int res;
-
- pr_debug("of_irq_map_one: dev=%s, index=%d\n",
- device->full_name, index);
-
- /* Get the interrupts property */
- intspec = of_get_property(device, "interrupts", (int *) &intlen);
- if (intspec == NULL)
- return -EINVAL;
- intlen /= sizeof(u32);
-
- pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
-
- /* Get the reg property (if any) */
- addr = of_get_property(device, "reg", NULL);
-
- /* Look for the interrupt parent. */
- p = of_irq_find_parent(device);
- if (p == NULL)
- return -EINVAL;
-
- /* Get size of interrupt specifier */
- tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- of_node_put(p);
- return -EINVAL;
- }
- intsize = *tmp;
-
- pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
-
- /* Check index */
- if ((index + 1) * intsize > intlen)
- return -EINVAL;
-
- /* Get new specifier and map it */
- res = of_irq_map_raw(p, intspec + index * intsize, intsize,
- addr, out_irq);
- of_node_put(p);
- return res;
+ return __of_irq_map_one(device, index, out_irq);
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
@@ -740,35 +698,6 @@ const void *of_get_mac_address(struct device_node *np)
}
EXPORT_SYMBOL(of_get_mac_address);
-int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
-{
- struct of_irq out_irq;
- int irq;
- int res;
-
- res = of_irq_map_one(dev, index, &out_irq);
-
- /* Get irq for the device */
- if (res) {
- pr_debug("IRQ not found... code = %d", res);
- return NO_IRQ;
- }
- /* Assuming single interrupt controller... */
- irq = out_irq.specifier[0];
-
- pr_debug("IRQ found = %d", irq);
-
- /* Only dereference the resource if both the
- * resource and the irq are valid. */
- if (r && irq != NO_IRQ) {
- r->start = r->end = irq;
- r->flags = IORESOURCE_IRQ;
- }
-
- return irq;
-}
-EXPORT_SYMBOL_GPL(of_irq_to_resource);
-
void __iomem *of_iomap(struct device_node *np, int index)
{
struct resource res;
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 187ef4e..2440984 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -136,9 +136,6 @@ extern void of_irq_map_init(unsigned int flags);
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-extern int of_irq_to_resource(struct device_node *dev, int index,
- struct resource *r);
-
/**
* of_iomap - Maps the memory mapped IO for a given device_node
* @device: the device whose io range will be mapped
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 89ca7b3..ef518e3 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -777,49 +777,11 @@ static int of_irq_map_oldworld(struct device_node *device, int index,
int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
{
- struct device_node *p;
- const u32 *intspec, *tmp, *addr;
- u32 intsize, intlen;
- int res = -EINVAL;
-
- DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
-
/* OldWorld mac stuff is "special", handle out of line */
if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
return of_irq_map_oldworld(device, index, out_irq);
- /* Get the interrupts property */
- intspec = of_get_property(device, "interrupts", &intlen);
- if (intspec == NULL)
- return -EINVAL;
- intlen /= sizeof(u32);
-
- /* Get the reg property (if any) */
- addr = of_get_property(device, "reg", NULL);
-
- /* Look for the interrupt parent. */
- p = of_irq_find_parent(device);
- if (p == NULL)
- return -EINVAL;
-
- /* Get size of interrupt specifier */
- tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL)
- goto out;
- intsize = *tmp;
-
- DBG(" intsize=%d intlen=%d\n", intsize, intlen);
-
- /* Check index */
- if ((index + 1) * intsize > intlen)
- goto out;
-
- /* Get new specifier and map it */
- res = of_irq_map_raw(p, intspec + index * intsize, intsize,
- addr, out_irq);
-out:
- of_node_put(p);
- return res;
+ return __of_irq_map_one(device, index, out_irq);
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
@@ -861,21 +823,6 @@ const void *of_get_mac_address(struct device_node *np)
}
EXPORT_SYMBOL(of_get_mac_address);
-int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
-{
- int irq = irq_of_parse_and_map(dev, index);
-
- /* Only dereference the resource if both the
- * resource and the irq are valid. */
- if (r && irq != NO_IRQ) {
- r->start = r->end = irq;
- r->flags = IORESOURCE_IRQ;
- }
-
- return irq;
-}
-EXPORT_SYMBOL_GPL(of_irq_to_resource);
-
void __iomem *of_iomap(struct device_node *np, int index)
{
struct resource res;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 351c87a..dd420e5 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -31,7 +31,7 @@
* Returns a pointer to the interrupt parent node, or NULL if the interrupt
* parent could not be determined.
*/
-struct device_node *of_irq_find_parent(struct device_node *child)
+static struct device_node *of_irq_find_parent(struct device_node *child)
{
struct device_node *p;
const phandle *parp;
@@ -240,6 +240,67 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
}
EXPORT_SYMBOL_GPL(of_irq_map_raw);
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device: the device whose interrupt is to be resolved
+ * @index: index of the interrupt to resolve
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ *
+ * Architecture code must provide of_irq_map_one() which can simply be a
+ * wrapper around __of_irq_map_one(), or can override it to deal with
+ * arch specific quirks and bugs.
+ */
+int __of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq)
+{
+ struct device_node *p;
+ const u32 *intspec, *tmp, *addr;
+ u32 intsize, intlen;
+ int res = -EINVAL;
+
+ pr_debug("of_irq_map_one: dev=%s, index=%d\n",
+ device->full_name, index);
+
+ /* Get the interrupts property */
+ intspec = of_get_property(device, "interrupts", &intlen);
+ if (intspec == NULL)
+ return -EINVAL;
+ intlen /= sizeof(u32);
+
+ pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
+
+ /* Get the reg property (if any) */
+ addr = of_get_property(device, "reg", NULL);
+
+ /* Look for the interrupt parent. */
+ p = of_irq_find_parent(device);
+ if (p == NULL)
+ return -EINVAL;
+
+ /* Get size of interrupt specifier */
+ tmp = of_get_property(p, "#interrupt-cells", NULL);
+ if (tmp == NULL)
+ goto out;
+ intsize = *tmp;
+
+ pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
+
+ /* Check index */
+ if ((index + 1) * intsize > intlen)
+ goto out;
+
+ /* Get new specifier and map it */
+ res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+ addr, out_irq);
+ out:
+ of_node_put(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(__of_irq_map_one);
+
unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
{
struct of_irq oirq;
@@ -251,3 +312,25 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
oirq.size);
}
EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
+
+/**
+ * of_irq_to_resource - Decode a node's IRQ and return it as a resource
+ * @dev: pointer to device tree node
+ * @index: zero-based index of the irq
+ * @r: pointer to resource structure to return result into.
+ */
+unsigned int of_irq_to_resource(struct device_node *dev, int index,
+ struct resource *r)
+{
+ unsigned int irq = irq_of_parse_and_map(dev, index);
+
+ /* Only dereference the resource if both the
+ * resource and the irq are valid. */
+ if (r && irq != NO_IRQ) {
+ r->start = r->end = irq;
+ r->flags = IORESOURCE_IRQ;
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 51c520b..935a14d 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -5,6 +5,7 @@
struct of_irq;
#include <linux/types.h>
#include <linux/of.h>
+#include <linux/ioport.h>
/*
* irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
@@ -31,14 +32,17 @@ struct of_irq {
};
extern struct device_node *of_irq_find_parent_by_phandle(phandle p);
-extern struct device_node *of_irq_find_parent(struct device_node *child);
extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
u32 ointsize, const u32 *addr, struct of_irq *out_irq);
+extern int __of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq);
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
extern unsigned int irq_create_of_mapping(struct device_node *controller,
const u32 *intspec,
unsigned int intsize);
+extern unsigned int of_irq_to_resource(struct device_node *dev, int index,
+ struct resource *r);
#endif /* CONFIG_OF_IRQ */
#endif /* CONFIG_OF */
^ permalink raw reply related
* [PATCH 4/5] of/irq: Merge of_irq_map_raw()
From: Grant Likely @ 2010-06-04 21:21 UTC (permalink / raw)
Cc: Stephen Rothwell, Michal Simek, microblaze-uclinux,
devicetree-discuss, linuxppc-dev
In-Reply-To: <20100604212134.10552.70717.stgit@angua>
Merge common code between PowerPC and Microblaze
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: devicetree-discuss@lists.ozlabs.org
---
arch/microblaze/include/asm/prom.h | 21 ----
arch/microblaze/kernel/prom_parse.c | 176 ---------------------------------
arch/powerpc/include/asm/prom.h | 21 ----
arch/powerpc/kernel/prom_parse.c | 171 --------------------------------
drivers/of/irq.c | 188 +++++++++++++++++++++++++++++++++++
include/linux/of_irq.h | 2
6 files changed, 190 insertions(+), 389 deletions(-)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index da7069c..89fca70 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -94,27 +94,6 @@ extern const void *of_get_mac_address(struct device_node *np);
*/
/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent: the device interrupt parent
- * @intspec: interrupt specifier ("interrupts" property of the device)
- * @ointsize: size of the passed in interrupt specifier
- * @addr: address specifier (start of "reg" property of the device)
- * @out_irq: structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
- u32 ointsize, const u32 *addr,
- struct of_irq *out_irq);
-
-/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 946f14d..02ec946 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -653,182 +653,6 @@ struct device_node *of_irq_find_parent_by_phandle(phandle p)
return of_find_node_by_phandle(p);
}
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
- const u32 *addr, struct of_irq *out_irq)
-{
- struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const u32 *tmp, *imap, *imask;
- u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
- int imaplen, match, i;
-
- pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
- "ointsize=%d\n",
- parent->full_name, intspec[0], intspec[1], ointsize);
-
- ipar = of_node_get(parent);
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
- if (tmp != NULL) {
- intsize = *tmp;
- break;
- }
- tnode = ipar;
- ipar = of_irq_find_parent(ipar);
- of_node_put(tnode);
- } while (ipar);
- if (ipar == NULL) {
- pr_debug(" -> no parent found !\n");
- goto fail;
- }
-
- pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
- ipar->full_name, intsize);
-
- if (ointsize != intsize)
- return -EINVAL;
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = of_node_get(ipar);
- do {
- tmp = of_get_property(old, "#address-cells", NULL);
- tnode = of_get_parent(old);
- of_node_put(old);
- old = tnode;
- } while (old && tmp == NULL);
- of_node_put(old);
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : *tmp;
-
- pr_debug(" -> addrsize=%d\n", addrsize);
-
- /* Now start the actual "proper" walk of the interrupt tree */
- while (ipar != NULL) {
- /* Now check if cursor is an interrupt-controller and if it is
- * then we are done
- */
- if (of_get_property(ipar, "interrupt-controller", NULL) !=
- NULL) {
- pr_debug(" -> got it !\n");
- memcpy(out_irq->specifier, intspec,
- intsize * sizeof(u32));
- out_irq->size = intsize;
- out_irq->controller = ipar;
- of_node_put(old);
- return 0;
- }
-
- /* Now look for an interrupt-map */
- imap = of_get_property(ipar, "interrupt-map", &imaplen);
- /* No interrupt map, check for an interrupt parent */
- if (imap == NULL) {
- pr_debug(" -> no map, getting parent\n");
- newpar = of_irq_find_parent(ipar);
- goto skiplevel;
- }
- imaplen /= sizeof(u32);
-
- /* Look for a mask */
- imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
- /* If we were passed no "reg" property and we attempt to parse
- * an interrupt-map, then #address-cells must be 0.
- * Fail if it's not.
- */
- if (addr == NULL && addrsize != 0) {
- pr_debug(" -> no reg passed in when needed !\n");
- goto fail;
- }
-
- /* Parse interrupt-map */
- match = 0;
- while (imaplen > (addrsize + intsize + 1) && !match) {
- /* Compare specifiers */
- match = 1;
- for (i = 0; i < addrsize && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match = ((addr[i] ^ imap[i]) & mask) == 0;
- }
- for (; i < (addrsize + intsize) && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match =
- ((intspec[i-addrsize] ^ imap[i])
- & mask) == 0;
- }
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
- /* Get the interrupt parent */
- newpar = of_irq_find_parent_by_phandle((phandle)*imap);
- imap++;
- --imaplen;
-
- /* Check if not found */
- if (newpar == NULL) {
- pr_debug(" -> imap parent not found !\n");
- goto fail;
- }
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- pr_debug(" -> parent lacks "
- "#interrupt-cells!\n");
- goto fail;
- }
- newintsize = *tmp;
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
- pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
- newintsize, newaddrsize);
-
- /* Check for malformed properties */
- if (imaplen < (newaddrsize + newintsize))
- goto fail;
-
- imap += newaddrsize + newintsize;
- imaplen -= newaddrsize + newintsize;
-
- pr_debug(" -> imaplen=%d\n", imaplen);
- }
- if (!match)
- goto fail;
-
- of_node_put(old);
- old = of_node_get(newpar);
- addrsize = newaddrsize;
- intsize = newintsize;
- intspec = imap - intsize;
- addr = intspec - addrsize;
-
-skiplevel:
- /* Iterate again with new parent */
- pr_debug(" -> new parent: %s\n",
- newpar ? newpar->full_name : "<>");
- of_node_put(ipar);
- ipar = newpar;
- newpar = NULL;
- }
-fail:
- of_node_put(ipar);
- of_node_put(old);
- of_node_put(newpar);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
int of_irq_map_one(struct device_node *device,
int index, struct of_irq *out_irq)
{
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 47d41b6..187ef4e 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -123,27 +123,6 @@ extern const void *of_get_mac_address(struct device_node *np);
extern void of_irq_map_init(unsigned int flags);
/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent: the device interrupt parent
- * @intspec: interrupt specifier ("interrupts" property of the device)
- * @ointsize: size of the passed in interrupt specifier
- * @addr: address specifier (start of "reg" property of the device)
- * @out_irq: structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
- u32 ointsize, const u32 *addr,
- struct of_irq *out_irq);
-
-/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 39e977d..89ca7b3 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -731,177 +731,6 @@ void of_irq_map_init(unsigned int flags)
}
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
- const u32 *addr, struct of_irq *out_irq)
-{
- struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const u32 *tmp, *imap, *imask;
- u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
- int imaplen, match, i;
-
- DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
- parent->full_name, intspec[0], intspec[1], ointsize);
-
- ipar = of_node_get(parent);
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = of_get_property(ipar, "#interrupt-cells", NULL);
- if (tmp != NULL) {
- intsize = *tmp;
- break;
- }
- tnode = ipar;
- ipar = of_irq_find_parent(ipar);
- of_node_put(tnode);
- } while (ipar);
- if (ipar == NULL) {
- DBG(" -> no parent found !\n");
- goto fail;
- }
-
- DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
-
- if (ointsize != intsize)
- return -EINVAL;
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = of_node_get(ipar);
- do {
- tmp = of_get_property(old, "#address-cells", NULL);
- tnode = of_get_parent(old);
- of_node_put(old);
- old = tnode;
- } while(old && tmp == NULL);
- of_node_put(old);
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : *tmp;
-
- DBG(" -> addrsize=%d\n", addrsize);
-
- /* Now start the actual "proper" walk of the interrupt tree */
- while (ipar != NULL) {
- /* Now check if cursor is an interrupt-controller and if it is
- * then we are done
- */
- if (of_get_property(ipar, "interrupt-controller", NULL) !=
- NULL) {
- DBG(" -> got it !\n");
- memcpy(out_irq->specifier, intspec,
- intsize * sizeof(u32));
- out_irq->size = intsize;
- out_irq->controller = ipar;
- of_node_put(old);
- return 0;
- }
-
- /* Now look for an interrupt-map */
- imap = of_get_property(ipar, "interrupt-map", &imaplen);
- /* No interrupt map, check for an interrupt parent */
- if (imap == NULL) {
- DBG(" -> no map, getting parent\n");
- newpar = of_irq_find_parent(ipar);
- goto skiplevel;
- }
- imaplen /= sizeof(u32);
-
- /* Look for a mask */
- imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
- /* If we were passed no "reg" property and we attempt to parse
- * an interrupt-map, then #address-cells must be 0.
- * Fail if it's not.
- */
- if (addr == NULL && addrsize != 0) {
- DBG(" -> no reg passed in when needed !\n");
- goto fail;
- }
-
- /* Parse interrupt-map */
- match = 0;
- while (imaplen > (addrsize + intsize + 1) && !match) {
- /* Compare specifiers */
- match = 1;
- for (i = 0; i < addrsize && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match = ((addr[i] ^ imap[i]) & mask) == 0;
- }
- for (; i < (addrsize + intsize) && match; ++i) {
- u32 mask = imask ? imask[i] : 0xffffffffu;
- match =
- ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
- }
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
- /* Get the interrupt parent */
- newpar = of_irq_find_parent_by_phandle((phandle)*imap);
- imap++;
- --imaplen;
-
- /* Check if not found */
- if (newpar == NULL) {
- DBG(" -> imap parent not found !\n");
- goto fail;
- }
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = of_get_property(newpar, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- DBG(" -> parent lacks #interrupt-cells !\n");
- goto fail;
- }
- newintsize = *tmp;
- tmp = of_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
- DBG(" -> newintsize=%d, newaddrsize=%d\n",
- newintsize, newaddrsize);
-
- /* Check for malformed properties */
- if (imaplen < (newaddrsize + newintsize))
- goto fail;
-
- imap += newaddrsize + newintsize;
- imaplen -= newaddrsize + newintsize;
-
- DBG(" -> imaplen=%d\n", imaplen);
- }
- if (!match)
- goto fail;
-
- of_node_put(old);
- old = of_node_get(newpar);
- addrsize = newaddrsize;
- intsize = newintsize;
- intspec = imap - intsize;
- addr = intspec - addrsize;
-
- skiplevel:
- /* Iterate again with new parent */
- DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
- of_node_put(ipar);
- ipar = newpar;
- newpar = NULL;
- }
- fail:
- of_node_put(ipar);
- of_node_put(old);
- of_node_put(newpar);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
static int of_irq_map_oldworld(struct device_node *device, int index,
struct of_irq *out_irq)
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index ad569ca..351c87a 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -52,6 +52,194 @@ struct device_node *of_irq_find_parent(struct device_node *child)
return p;
}
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @ointsize: size of the passed in interrupt specifier
+ * @addr: address specifier (start of "reg" property of the device)
+ * @out_irq: structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ */
+int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
+ const u32 *addr, struct of_irq *out_irq)
+{
+ struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ const u32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ int imaplen, match, i;
+
+ pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+ parent->full_name, intspec[0], intspec[1], ointsize);
+
+ ipar = of_node_get(parent);
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+ if (tmp != NULL) {
+ intsize = *tmp;
+ break;
+ }
+ tnode = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tnode);
+ } while (ipar);
+ if (ipar == NULL) {
+ pr_debug(" -> no parent found !\n");
+ goto fail;
+ }
+
+ pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
+ ipar->full_name, intsize);
+
+ if (ointsize != intsize)
+ return -EINVAL;
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = of_node_get(ipar);
+ do {
+ tmp = of_get_property(old, "#address-cells", NULL);
+ tnode = of_get_parent(old);
+ of_node_put(old);
+ old = tnode;
+ } while (old && tmp == NULL);
+ of_node_put(old);
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : *tmp;
+
+ pr_debug(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while (ipar != NULL) {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if (of_get_property(ipar, "interrupt-controller", NULL) !=
+ NULL) {
+ pr_debug(" -> got it !\n");
+ memcpy(out_irq->specifier, intspec,
+ intsize * sizeof(u32));
+ out_irq->size = intsize;
+ out_irq->controller = ipar;
+ of_node_put(old);
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = of_get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if (imap == NULL) {
+ pr_debug(" -> no map, getting parent\n");
+ newpar = of_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if (addr == NULL && addrsize != 0) {
+ pr_debug(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while (imaplen > (addrsize + intsize + 1) && !match) {
+ /* Compare specifiers */
+ match = 1;
+ for (i = 0; i < addrsize && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for (; i < (addrsize + intsize) && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match =
+ ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ newpar = of_irq_find_parent_by_phandle((phandle)*imap);
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if (newpar == NULL) {
+ pr_debug(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ pr_debug(" -> parent lacks #interrupt-cells!\n");
+ goto fail;
+ }
+ newintsize = *tmp;
+ tmp = of_get_property(newpar, "#address-cells", NULL);
+ newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+ pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if (imaplen < (newaddrsize + newintsize))
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ pr_debug(" -> imaplen=%d\n", imaplen);
+ }
+ if (!match)
+ goto fail;
+
+ of_node_put(old);
+ old = of_node_get(newpar);
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+ skiplevel:
+ /* Iterate again with new parent */
+ pr_debug(" -> new parent: %s\n",
+ newpar ? newpar->full_name : "<>");
+ of_node_put(ipar);
+ ipar = newpar;
+ newpar = NULL;
+ }
+ fail:
+ of_node_put(ipar);
+ of_node_put(old);
+ of_node_put(newpar);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
{
struct of_irq oirq;
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index f98b27b..51c520b 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -32,6 +32,8 @@ struct of_irq {
extern struct device_node *of_irq_find_parent_by_phandle(phandle p);
extern struct device_node *of_irq_find_parent(struct device_node *child);
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+ u32 ointsize, const u32 *addr, struct of_irq *out_irq);
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
extern unsigned int irq_create_of_mapping(struct device_node *controller,
^ permalink raw reply related
* [PATCH 3/5] of/irq: merge of_irq_find_parent()
From: Grant Likely @ 2010-06-04 21:21 UTC (permalink / raw)
Cc: Stephen Rothwell, Michal Simek, microblaze-uclinux,
devicetree-discuss, linuxppc-dev
In-Reply-To: <20100604212134.10552.70717.stgit@angua>
Merge common code between PowerPC and Microblaze. Also create a new
arch hook, of_irq_find_parent_by_phandle() to handle arch-specific
quirks.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@lists.ozlabs.org
CC: devicetree-discuss@lists.ozlabs.org
---
arch/microblaze/kernel/prom_parse.c | 22 +++-------------------
arch/powerpc/kernel/prom_parse.c | 30 +++++-------------------------
drivers/of/irq.c | 28 ++++++++++++++++++++++++++++
include/linux/of_irq.h | 2 ++
4 files changed, 38 insertions(+), 44 deletions(-)
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index af1b2a7..946f14d 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -648,25 +648,9 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
* Interrupt remapper
*/
-static struct device_node *of_irq_find_parent(struct device_node *child)
+struct device_node *of_irq_find_parent_by_phandle(phandle p)
{
- struct device_node *p;
- const phandle *parp;
-
- if (!of_node_get(child))
- return NULL;
-
- do {
- parp = of_get_property(child, "interrupt-parent", NULL);
- if (parp == NULL)
- p = of_get_parent(child);
- else
- p = of_find_node_by_phandle(*parp);
- of_node_put(child);
- child = p;
- } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
-
- return p;
+ return of_find_node_by_phandle(p);
}
int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
@@ -783,7 +767,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
/* Get the interrupt parent */
- newpar = of_find_node_by_phandle((phandle)*imap);
+ newpar = of_irq_find_parent_by_phandle((phandle)*imap);
imap++;
--imaplen;
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 8362620..39e977d 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -685,29 +685,12 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
static unsigned int of_irq_workarounds;
static struct device_node *of_irq_dflt_pic;
-static struct device_node *of_irq_find_parent(struct device_node *child)
+struct device_node *of_irq_find_parent_by_phandle(phandle p)
{
- struct device_node *p;
- const phandle *parp;
-
- if (!of_node_get(child))
- return NULL;
-
- do {
- parp = of_get_property(child, "interrupt-parent", NULL);
- if (parp == NULL)
- p = of_get_parent(child);
- else {
- if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
- p = of_node_get(of_irq_dflt_pic);
- else
- p = of_find_node_by_phandle(*parp);
- }
- of_node_put(child);
- child = p;
- } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ return of_node_get(of_irq_dflt_pic);
- return p;
+ return of_find_node_by_phandle(p);
}
/* This doesn't need to be called if you don't have any special workaround
@@ -859,10 +842,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
/* Get the interrupt parent */
- if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
- newpar = of_node_get(of_irq_dflt_pic);
- else
- newpar = of_find_node_by_phandle((phandle)*imap);
+ newpar = of_irq_find_parent_by_phandle((phandle)*imap);
imap++;
--imaplen;
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 56ad1aa..ad569ca 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -24,6 +24,34 @@
#include <linux/of_irq.h>
#include <linux/string.h>
+/**
+ * of_irq_find_parent - Given a device node, find its interrupt parent node
+ * @child: pointer to device node
+ *
+ * Returns a pointer to the interrupt parent node, or NULL if the interrupt
+ * parent could not be determined.
+ */
+struct device_node *of_irq_find_parent(struct device_node *child)
+{
+ struct device_node *p;
+ const phandle *parp;
+
+ if (!of_node_get(child))
+ return NULL;
+
+ do {
+ parp = of_get_property(child, "interrupt-parent", NULL);
+ if (parp == NULL)
+ p = of_get_parent(child);
+ else
+ p = of_irq_find_parent_by_phandle(*parp);
+ of_node_put(child);
+ child = p;
+ } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+
+ return p;
+}
+
unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
{
struct of_irq oirq;
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index 0e37c05..f98b27b 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -30,6 +30,8 @@ struct of_irq {
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
+extern struct device_node *of_irq_find_parent_by_phandle(phandle p);
+extern struct device_node *of_irq_find_parent(struct device_node *child);
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
extern unsigned int irq_create_of_mapping(struct device_node *controller,
^ permalink raw reply related
* [PATCH 0/2] Replace of_device with platform_device
From: Grant Likely @ 2010-06-04 21:13 UTC (permalink / raw)
To: David Miller, Benjamin Herrenschmidt, Michal Simek,
Stephen Rothwell, linuxppc-dev, sparclinux, microblaze-uclinux
In-Reply-To: <20100604205930.2762.17131.stgit@angua>
This series is based on Linus' current tree. =A0It eliminate struct
of_device in preparation for the merge of of_platform_bus_type and
platform_bus_type.
Assuming there are no objections, I'll be putting these to linux-next
to stew sometime next week.
g.
---
Grant Likely (2):
=A0 =A0 =A0sparc/of: Move of_device fields into struct pdev_archdata
=A0 =A0 =A0of: kill struct of_device
=A0arch/microblaze/include/asm/of_device.h | =A0 10 ----------
=A0arch/powerpc/include/asm/of_device.h =A0 =A0| =A0 11 -----------
=A0arch/powerpc/include/asm/smu.h =A0 =A0 =A0 =A0 =A0| =A0 =A04 ++--
=A0arch/sparc/include/asm/device.h =A0 =A0 =A0 =A0 | =A0 =A09 +++++++--
=A0arch/sparc/include/asm/floppy_64.h =A0 =A0 =A0| =A0 =A04 ++--
=A0arch/sparc/include/asm/of_device.h =A0 =A0 =A0| =A0 19 -----------------=
--
=A0arch/sparc/include/asm/parport.h =A0 =A0 =A0 =A0| =A0 =A04 ++--
=A0arch/sparc/kernel/of_device_32.c =A0 =A0 =A0 =A0| =A0 28 ++++++++++++---=
-------------
=A0arch/sparc/kernel/of_device_64.c =A0 =A0 =A0 =A0| =A0 24 ++++++++++-----=
---------
=A0arch/sparc/kernel/of_device_common.c =A0 =A0| =A0 =A04 ++--
=A0arch/sparc/kernel/pci.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0arch/sparc/kernel/pci_psycho.c =A0 =A0 =A0 =A0 =A0| =A0 =A08 ++++----
=A0arch/sparc/kernel/pci_sabre.c =A0 =A0 =A0 =A0 =A0 | =A0 =A08 ++++----
=A0arch/sparc/kernel/pci_schizo.c =A0 =A0 =A0 =A0 =A0| =A0 20 ++++++++++---=
-------
=A0arch/sparc/kernel/power.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0drivers/atm/fore200e.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A02 +-
=A0drivers/input/serio/i8042-sparcio.h =A0 =A0 | =A0 =A08 ++++----
=A0drivers/net/myri_sbus.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0drivers/net/niu.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A06=
+++---
=A0drivers/net/niu.h =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A04=
++--
=A0drivers/net/sunbmac.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0drivers/net/sunhme.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A06 +=
++---
=A0drivers/net/sunlance.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A02 +-
=A0drivers/net/sunqe.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A06 +=
++---
=A0drivers/parport/parport_sunbpp.c =A0 =A0 =A0 =A0| =A0 =A02 +-
=A0drivers/sbus/char/bbc_i2c.c =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A06 +++---
=A0drivers/sbus/char/uctrl.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0drivers/scsi/qlogicpti.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A04 ++--
=A0drivers/scsi/sun_esp.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A02 +-
=A0drivers/serial/sunhv.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A04 ++-=
-
=A0drivers/serial/sunsab.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0drivers/serial/sunsu.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A02 +-
=A0drivers/serial/sunzilog.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 10 +++++----=
-
=A0drivers/watchdog/cpwd.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0include/linux/of_device.h =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 17 +++++++++=
++++++++
=A0sound/sparc/amd7930.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =A02 +-
=A0sound/sparc/cs4231.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 14 +++=
++++-------
=A0sound/sparc/dbri.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0 =A02=
+-
=A038 files changed, 120 insertions(+), 146 deletions(-)
--
Signature
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* [PATCH 1/5] of/irq: Move irq_of_parse_and_map() to common code
From: Grant Likely @ 2010-06-04 21:21 UTC (permalink / raw)
Cc: Stephen Rothwell, Michal Simek, devicetree-discuss, linuxppc-dev,
microblaze-uclinux, sparclinux, Jeremy Kerr, David S. Miller
Merge common code between PowerPC and Microblaze. SPARC implements
irq_of_parse_and_map(), but the implementation is different, so it
does not use this code.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: "David S. Miller" <davem@davemloft.net>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Jeremy Kerr <jeremy.kerr@canonical.com>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: sparclinux@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
---
arch/microblaze/include/asm/irq.h | 13 -----------
arch/microblaze/include/asm/prom.h | 26 +----------------------
arch/microblaze/kernel/irq.c | 14 ++----------
arch/powerpc/include/asm/irq.h | 13 -----------
arch/powerpc/include/asm/prom.h | 27 +-----------------------
arch/powerpc/kernel/irq.c | 14 ++----------
arch/sparc/include/asm/prom.h | 1 -
drivers/of/Kconfig | 4 ++++
drivers/of/Makefile | 1 +
drivers/of/irq.c | 37 ++++++++++++++++++++++++++++++++
drivers/of/of_mdio.c | 1 +
include/linux/of_irq.h | 41 ++++++++++++++++++++++++++++++++++++
12 files changed, 90 insertions(+), 102 deletions(-)
create mode 100644 drivers/of/irq.c
create mode 100644 include/linux/of_irq.h
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 31a35c3..10d75c1 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -62,17 +62,4 @@ struct irq_host;
extern unsigned int irq_create_mapping(struct irq_host *host,
irq_hw_number_t hwirq);
-/**
- * irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
- u32 *intspec, unsigned int intsize);
-
#endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index e7d67a3..e9fb2eb 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -20,6 +20,7 @@
#ifndef __ASSEMBLY__
#include <linux/types.h>
+#include <linux/of_irq.h>
#include <linux/of_fdt.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
@@ -92,18 +93,6 @@ extern const void *of_get_mac_address(struct device_node *np);
* OF interrupt mapping
*/
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
- struct device_node *controller; /* Interrupt controller node */
- u32 size; /* Specifier size */
- u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
/**
* of_irq_map_init - Initialize the irq remapper
* @flags: flags defining workarounds to enable
@@ -139,19 +128,6 @@ extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
struct of_irq *out_irq);
/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device: the device whose interrupt is to be resolved
- * @index: index of the interrupt to resolve
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
- struct of_irq *out_irq);
-
-/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 8f120ac..dd32b09 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -17,20 +17,10 @@
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
#include <linux/irq.h>
+#include <linux/of_irq.h>
#include <asm/prom.h>
-unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
-{
- struct of_irq oirq;
-
- if (of_irq_map_one(dev, index, &oirq))
- return NO_IRQ;
-
- return oirq.specifier[0];
-}
-EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-
static u32 concurrent_irq;
void __irq_entry do_IRQ(struct pt_regs *regs)
@@ -104,7 +94,7 @@ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
EXPORT_SYMBOL_GPL(irq_create_mapping);
unsigned int irq_create_of_mapping(struct device_node *controller,
- u32 *intspec, unsigned int intsize)
+ const u32 *intspec, unsigned int intsize)
{
return intspec[0];
}
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054bae..a3b5124 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -304,19 +304,6 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
/* -- OF helpers -- */
/**
- * irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize);
-
-/**
* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
* @device: Device node of the device whose interrupt is to be mapped
* @index: Index of the interrupt to map
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index ddd408a..47d41b6 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -18,6 +18,7 @@
*/
#include <linux/types.h>
#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
@@ -108,18 +109,6 @@ extern const void *of_get_mac_address(struct device_node *np);
* OF interrupt mapping
*/
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
- struct device_node *controller; /* Interrupt controller node */
- u32 size; /* Specifier size */
- u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
/**
* of_irq_map_init - Initialize the irq remapper
* @flags: flags defining workarounds to enable
@@ -154,20 +143,6 @@ extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
u32 ointsize, const u32 *addr,
struct of_irq *out_irq);
-
-/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device: the device whose interrupt is to be resolved
- * @index: index of the interrupt to resolve
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
- struct of_irq *out_irq);
-
/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 30817d9..2676ef2 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,6 +53,8 @@
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -813,18 +815,6 @@ unsigned int irq_create_of_mapping(struct device_node *controller,
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
-unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
-{
- struct of_irq oirq;
-
- if (of_irq_map_one(dev, index, &oirq))
- return NO_IRQ;
-
- return irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
-}
-EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-
void irq_dispose_mapping(unsigned int virq)
{
struct irq_host *host;
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index f845828..ac69574 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -56,7 +56,6 @@ extern void of_fill_in_cpu_data(void);
* register them in the of_device objects, whereas powerpc computes them
* on request.
*/
-extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
static inline void irq_dispose_mapping(unsigned int virq)
{
}
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 7cecc8f..b87495e 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -6,6 +6,10 @@ config OF_DYNAMIC
def_bool y
depends on OF && PPC_OF
+config OF_IRQ
+ def_bool y
+ depends on OF && !SPARC
+
config OF_DEVICE
def_bool y
depends on OF && (SPARC || PPC_OF || MICROBLAZE)
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index f232cc9..3631a5e 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,5 +1,6 @@
obj-y = base.o
obj-$(CONFIG_OF_FLATTREE) += fdt.o
+obj-$(CONFIG_OF_IRQ) += irq.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
obj-$(CONFIG_OF_GPIO) += gpio.o
obj-$(CONFIG_OF_I2C) += of_i2c.o
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
new file mode 100644
index 0000000..56ad1aa
--- /dev/null
+++ b/drivers/of/irq.c
@@ -0,0 +1,37 @@
+/*
+ * Derived from arch/i386/kernel/irq.c
+ * Copyright (C) 1992 Linus Torvalds
+ * Adapted from arch/i386 by Gary Thomas
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ * Copyright (C) 1996-2001 Cort Dougan
+ * Adapted for Power Macintosh by Paul Mackerras
+ * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file contains the code used to make IRQ descriptions in the
+ * device tree to actual irq numbers on an interrupt controller
+ * driver.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/string.h>
+
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
+{
+ struct of_irq oirq;
+
+ if (of_irq_map_one(dev, index, &oirq))
+ return NO_IRQ;
+
+ return irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 42a6715..1fce00e 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/phy.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
new file mode 100644
index 0000000..0e37c05
--- /dev/null
+++ b/include/linux/of_irq.h
@@ -0,0 +1,41 @@
+#ifndef __OF_IRQ_H
+#define __OF_IRQ_H
+
+#if defined(CONFIG_OF)
+struct of_irq;
+#include <linux/types.h>
+#include <linux/of.h>
+
+/*
+ * irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
+ * implements it differently. However, the prototype is the same for all,
+ * so declare it here regardless of the CONFIG_OF_IRQ setting.
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
+
+#if defined(CONFIG_OF_IRQ)
+/**
+ * of_irq - container for device_node/irq_specifier pair for an irq controller
+ * @controller: pointer to interrupt controller device tree node
+ * @size: size of interrupt specifier
+ * @specifier: array of cells @size long specifing the specific interrupt
+ *
+ * This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
+struct of_irq {
+ struct device_node *controller; /* Interrupt controller node */
+ u32 size; /* Specifier size */
+ u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+extern int of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq);
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize);
+
+#endif /* CONFIG_OF_IRQ */
+#endif /* CONFIG_OF */
+#endif /* __OF_IRQ_H */
^ permalink raw reply related
* [PATCH 2/2] of: kill struct of_device
From: Grant Likely @ 2010-06-04 21:11 UTC (permalink / raw)
Cc: Stephen Rothwell, Michal Simek, microblaze-uclinux,
devicetree-discuss, linuxppc-dev, sparclinux, David S. Miller
In-Reply-To: <20100604205930.2762.17131.stgit@angua>
Now that the device tree node pointer has been moved out of struct
of_device and into the common struct device, there isn't anything
unique about of_device anymore. In fact, there isn't much need
for a separate of_bus when all busses have access to OF style
probing.
arch/powerpc and arch/microblaze are moving away from using the of_bus
and using the regular platform bus instead for mmio devices. This
patch makes of_device the same as platform_device as a stepping stone
in migrating of_platform_drivers over to the platform bus.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Michal Simek <monstr@monstr.eu>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: "David S. Miller" <davem@davemloft.net>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: microblaze-uclinux@itee.uq.edu.au
CC: linuxppc-dev@ozlabs.org
CC: sparclinux@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
---
arch/microblaze/include/asm/of_device.h | 10 ----------
arch/powerpc/include/asm/of_device.h | 11 -----------
arch/powerpc/include/asm/smu.h | 4 ++--
arch/sparc/include/asm/device.h | 4 ++--
arch/sparc/include/asm/of_device.h | 14 --------------
drivers/net/niu.h | 4 ++--
include/linux/of_device.h | 17 +++++++++++++++++
7 files changed, 23 insertions(+), 41 deletions(-)
diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h
index 73cb980..0a5f3f9 100644
--- a/arch/microblaze/include/asm/of_device.h
+++ b/arch/microblaze/include/asm/of_device.h
@@ -15,16 +15,6 @@
#include <linux/device.h>
#include <linux/of.h>
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device {
- struct device dev; /* Generic device interface */
- struct pdev_archdata archdata;
-};
-
extern ssize_t of_device_get_modalias(struct of_device *ofdev,
char *str, ssize_t len);
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
index 444e97e..cb36632 100644
--- a/arch/powerpc/include/asm/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
@@ -5,17 +5,6 @@
#include <linux/device.h>
#include <linux/of.h>
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
- struct device dev; /* Generic device interface */
- struct pdev_archdata archdata;
-};
-
extern struct of_device *of_device_alloc(struct device_node *np,
const char *bus_id,
struct device *parent);
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
index 7ae2753..e3bdada 100644
--- a/arch/powerpc/include/asm/smu.h
+++ b/arch/powerpc/include/asm/smu.h
@@ -457,8 +457,8 @@ extern void smu_poll(void);
*/
extern int smu_init(void);
extern int smu_present(void);
-struct of_device;
-extern struct of_device *smu_get_ofdev(void);
+struct platform_device;
+extern struct platform_device *smu_get_ofdev(void);
/*
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
index f9740d0..fb220e4 100644
--- a/arch/sparc/include/asm/device.h
+++ b/arch/sparc/include/asm/device.h
@@ -9,13 +9,13 @@
#include <asm/openprom.h>
struct device_node;
-struct of_device;
+struct platform_device;
struct dev_archdata {
void *iommu;
void *stc;
void *host_controller;
- struct of_device *op;
+ struct platform_device *op;
int numa_node;
};
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
index 6d1844a..22b9828 100644
--- a/arch/sparc/include/asm/of_device.h
+++ b/arch/sparc/include/asm/of_device.h
@@ -7,20 +7,6 @@
#include <linux/mod_devicetable.h>
#include <asm/openprom.h>
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
- struct device dev;
- u32 num_resources;
- struct resource *resource;
-
- struct pdev_archdata archdata;
-};
-
extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index d671546..a41fa8e 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3236,7 +3236,7 @@ struct niu_phy_ops {
int (*link_status)(struct niu *np, int *);
};
-struct of_device;
+struct platform_device;
struct niu {
void __iomem *regs;
struct net_device *dev;
@@ -3297,7 +3297,7 @@ struct niu {
struct niu_vpd vpd;
u32 eeprom_len;
- struct of_device *op;
+ struct platform_device *op;
void __iomem *vir_regs_1;
void __iomem *vir_regs_2;
};
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 11651fa..a3ae590 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -3,9 +3,26 @@
#ifdef CONFIG_OF_DEVICE
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/mod_devicetable.h>
+
+/*
+ * The of_device *was* a kind of "base class" that was a superset of
+ * struct device for use by devices attached to an OF node and probed
+ * using OF properties. However, the important bit of OF-style
+ * probing, namely the device node pointer, has been moved into the
+ * common struct device when CONFIG_OF is set to make OF-style probing
+ * available to all bus types. So now, just make of_device and
+ * platform_device equivalent so that current of_platform bus users
+ * can be transparently migrated over to using the platform bus.
+ *
+ * This line will go away once all references to of_device are removed
+ * from the kernel.
+ */
+#define of_device platform_device
+
#include <asm/of_device.h>
#define to_of_device(d) container_of(d, struct of_device, dev)
^ permalink raw reply related
* Re: fsl_rio.c build problem
From: Scott Wood @ 2010-06-04 20:04 UTC (permalink / raw)
To: kerstin jonsson; +Cc: linuxppc-dev
In-Reply-To: <4C08E25E.8000200@ericsson.com>
On 06/04/2010 06:24 AM, kerstin jonsson wrote:
> Hi,
>
> I'm using:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>
> and building for ARCH=powerpc - mpc85xx_defconfig
>
> arch/powerpc/sysdev/fsl_rio.c will not build due to a missing
> MCSR_MASK bitmask definition.
>
> The attached patch is based on code found in
>
> git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
>
> and - at the least - will fix the build problem.
Can we remove the use of MCSR_MASK from fsl_rio.c instead? I don't see
what it's accomplishing here. MCSR_MASK will be wrong on e500mc, so
exporting it as something that looks generic doesn't seem right.
MCSR_BUS_RBERR also needs to change on e500mc -- you'll probably get
MCSR_LDG.
-Scott
^ permalink raw reply
* Re: [PATCH 1/1] [SCSI] ipr: fix resource path display and formatting
From: Brian King @ 2010-06-04 19:04 UTC (permalink / raw)
To: Wayne Boyer; +Cc: betabandido, Anton Blanchard, linux-scsi, linuxppc-dev
In-Reply-To: <4C08347D.8010102@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
On 06/03/2010 06:02 PM, Wayne Boyer wrote:
> It was possible to overflow the buffer used to print out the formatted
> version of the resource path. The fix is to limit the number of
> bytes that get formatted.
>
> This patch also updates the ipr_show_resource_path function to display the
> resource address for devices that are attached to adapters that don't
> support resource paths.
>
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
>
> James, this patch needs to go into rc-fixes. It fixes an oops that is
> currently being seen on Power.
>
> ---
> drivers/scsi/ipr.c | 51 +++++++++++++++++++++++++++++++++------------------
> drivers/scsi/ipr.h | 5 +++--
> 2 files changed, 36 insertions(+), 20 deletions(-)
>
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c 2010-05-26 16:01:22.000000000 -0700
> +++ b/drivers/scsi/ipr.c 2010-06-03 15:31:59.000000000 -0700
> @@ -1129,20 +1129,22 @@ static int ipr_is_same_device(struct ipr
> }
>
> /**
> - * ipr_format_resource_path - Format the resource path for printing.
> + * ipr_format_res_path - Format the resource path for printing.
> * @res_path: resource path
> * @buf: buffer
> *
> * Return value:
> * pointer to buffer
> **/
> -static char *ipr_format_resource_path(u8 *res_path, char *buffer)
> +static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
> {
> int i;
> + char *p = buffer;
>
> - sprintf(buffer, "%02X", res_path[0]);
> - for (i=1; res_path[i] != 0xff; i++)
> - sprintf(buffer, "%s-%02X", buffer, res_path[i]);
> + res_path[0] = '\0';
> + p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
> + for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
> + p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
>
> return buffer;
> }
> @@ -1187,7 +1189,8 @@ static void ipr_update_res_entry(struct
>
> if (res->sdev && new_path)
> sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
> - ipr_format_resource_path(&res->res_path[0], &buffer[0]));
> + ipr_format_res_path(res->res_path, buffer,
> + sizeof(buffer)));
> } else {
> res->flags = cfgtew->u.cfgte->flags;
> if (res->flags & IPR_IS_IOA_RESOURCE)
> @@ -1573,7 +1576,8 @@ static void ipr_log_sis64_config_error(s
> ipr_err_separator;
>
> ipr_err("Device %d : %s", i + 1,
> - ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
> + ipr_format_res_path(dev_entry->res_path, buffer,
> + sizeof(buffer)));
> ipr_log_ext_vpd(&dev_entry->vpd);
>
> ipr_err("-----New Device Information-----\n");
> @@ -1919,13 +1923,14 @@ static void ipr_log64_fabric_path(struct
>
> ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
> path_active_desc[i].desc, path_state_desc[j].desc,
> - ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
> + ipr_format_res_path(fabric->res_path, buffer,
> + sizeof(buffer)));
> return;
> }
> }
>
> ipr_err("Path state=%02X Resource Path=%s\n", path_state,
> - ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
> + ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
> }
>
> static const struct {
> @@ -2066,7 +2071,8 @@ static void ipr_log64_path_elem(struct i
>
> ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
> path_status_desc[j].desc, path_type_desc[i].desc,
> - ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
> + ipr_format_res_path(cfg->res_path, buffer,
> + sizeof(buffer)),
> link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
> be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
> return;
> @@ -2074,7 +2080,7 @@ static void ipr_log64_path_elem(struct i
> }
> ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
> "WWN=%08X%08X\n", cfg->type_status,
> - ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
> + ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
> link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
> be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
> }
> @@ -2139,7 +2145,7 @@ static void ipr_log_sis64_array_error(st
>
> ipr_err("RAID %s Array Configuration: %s\n",
> error->protection_level,
> - ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
> + ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
>
> ipr_err_separator;
>
> @@ -2160,9 +2166,11 @@ static void ipr_log_sis64_array_error(st
> ipr_err("Array Member %d:\n", i);
> ipr_log_ext_vpd(&array_entry->vpd);
> ipr_err("Current Location: %s",
> - ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
> + ipr_format_res_path(array_entry->res_path, buffer,
> + sizeof(buffer)));
> ipr_err("Expected Location: %s",
> - ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
> + ipr_format_res_path(array_entry->expected_res_path,
> + buffer, sizeof(buffer)));
>
> ipr_err_separator;
> }
> @@ -4076,7 +4084,8 @@ static struct device_attribute ipr_adapt
> };
>
> /**
> - * ipr_show_resource_path - Show the resource path for this device.
> + * ipr_show_resource_path - Show the resource path or the resource address for
> + * this device.
> * @dev: device struct
> * @buf: buffer
> *
> @@ -4094,9 +4103,14 @@ static ssize_t ipr_show_resource_path(st
>
> spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
> res = (struct ipr_resource_entry *)sdev->hostdata;
> - if (res)
> + if (res && ioa_cfg->sis64)
> len = snprintf(buf, PAGE_SIZE, "%s\n",
> - ipr_format_resource_path(&res->res_path[0], &buffer[0]));
> + ipr_format_res_path(res->res_path, buffer,
> + sizeof(buffer)));
> + else if (res)
> + len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
> + res->bus, res->target, res->lun);
> +
> spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
> return len;
> }
> @@ -4348,7 +4362,8 @@ static int ipr_slave_configure(struct sc
> scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
> if (ioa_cfg->sis64)
> sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
> - ipr_format_resource_path(&res->res_path[0], &buffer[0]));
> + ipr_format_res_path(res->res_path, buffer,
> + sizeof(buffer)));
> return 0;
> }
> spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
> Index: b/drivers/scsi/ipr.h
> ===================================================================
> --- a/drivers/scsi/ipr.h 2010-05-26 16:01:22.000000000 -0700
> +++ b/drivers/scsi/ipr.h 2010-06-03 15:41:13.000000000 -0700
> @@ -1684,8 +1684,9 @@ struct ipr_ucode_image_header {
> if (ipr_is_device(hostrcb)) { \
> if ((hostrcb)->ioa_cfg->sis64) { \
> printk(KERN_ERR IPR_NAME ": %s: " fmt, \
> - ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
> - &hostrcb->rp_buffer[0]), \
> + ipr_format_res_path(hostrcb->hcam.u.error64.fd_res_path, \
> + hostrcb->rp_buffer, \
> + sizeof(hostrcb->rp_buffer)), \
> __VA_ARGS__); \
> } else { \
> ipr_ra_err((hostrcb)->ioa_cfg, \
>
--
Brian King
Linux on Power Virtualization
IBM Linux Technology Center
^ permalink raw reply
* Re: [PATCH 0/5] Rework MPC5121 DIU support (for 2.6.35)
From: Timur Tabi @ 2010-06-04 15:46 UTC (permalink / raw)
To: Anatolij Gustschin
Cc: linux-fbdev, wd, dzu, devicetree-discuss, linuxppc-dev, yorksun
In-Reply-To: <20100601113801.5b0ff773@wker>
On Tue, Jun 1, 2010 at 4:38 AM, Anatolij Gustschin <agust@denx.de> wrote:
> Could you please test these patches on MPC8610 HPCD? I think these
> changes won't break that platform. The patches apply cleanly on
> 2.6.35-rc1.
I'll try to get to them as soon as I can.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply
* Re: [PATCH] kvm/powerpc: fix a build error in e500_tlb.c
From: Alexander Graf @ 2010-06-04 14:08 UTC (permalink / raw)
To: Kevin Hao
Cc: kvm@vger.kernel.org list, Marcelo Tosatti, linuxppc-dev,
Avi Kivity
In-Reply-To: <1275544348-3469-1-git-send-email-haokexin@gmail.com>
On 03.06.2010, at 07:52, Kevin Hao wrote:
> We use the wrong number arguments when invoking trace_kvm_stlb_inval,
> and cause the following build error.
> arch/powerpc/kvm/e500_tlb.c: In function =
'kvmppc_e500_stlbe_invalidate':
> arch/powerpc/kvm/e500_tlb.c:230: error: too many arguments to function =
'trace_kvm_stlb_inval'
Liu, I'd like to get an ack from you here.
Alex
^ permalink raw reply
* [PATCH]460EX on-chip SATA driver<kernel 2.6.33><resubmission>
From: Rupjyoti Sarmah @ 2010-06-04 12:26 UTC (permalink / raw)
To: linux-ide, linux-kernel; +Cc: sr, linuxppc-dev, rsarmah, jgarzik
This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX.
Signed-off-by: Rupjyoti Sarmah <rsarmah@appliedmicro.com>
Signed-off-by: Mark Miesfeld <mmiesfeld@appliedmicro.com>
Signed-off-by: Prodyut Hazarika <phazarika@appliedmicro.com>
---
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/sata_dwc_460ex.c | 1808 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1818 insertions(+), 0 deletions(-)
create mode 100644 drivers/ata/sata_dwc_460ex.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 56c6374..bba7b8a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -82,6 +82,15 @@ config SATA_FSL
If unsure, say N.
+config SATA_DWC
+ tristate "DesignWare Cores SATA support"
+ depends on 460EX
+ help
+ This option enables support for the on-chip SATA controller of the
+ AppliedMicro processor 460EX.
+
+ If unsure, say N.
+
config ATA_SFF
bool "ATA SFF support"
default y
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index fc936d4..96ff315 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
new file mode 100644
index 0000000..e6e2896
--- /dev/null
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -0,0 +1,1808 @@
+/*
+ * drivers/ata/sata_dwc_460ex.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ * Copyright 2006 Applied Micro Circuits Corporation
+ * COPYRIGHT (C) 2005 SYNOPSYS, INC. ALL RIGHTS RESERVED
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef CONFIG_SATA_DWC_DEBUG
+#define DEBUG
+#endif
+
+#ifdef CONFIG_SATA_DWC_VDEBUG
+#define VERBOSE_DEBUG
+#define DEBUG_NCQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/libata.h>
+#include "libata.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+
+#define DRV_NAME "sata-dwc"
+#define DRV_VERSION "1.0"
+
+/* SATA DMA driver Globals */
+#define DMA_NUM_CHANS 1
+#define DMA_NUM_CHAN_REGS 8
+
+/* SATA DMA Register definitions */
+#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
+
+struct dmareg {
+ u32 low; /* Low bits 0-31 */
+ u32 high; /* High bits 32-63 */
+};
+
+/* DMA Per Channel registers */
+
+struct dma_chan_regs {
+ struct dmareg sar; /* Source Address */
+ struct dmareg dar; /* Destination address */
+ struct dmareg llp; /* Linked List Pointer */
+ struct dmareg ctl; /* Control */
+ struct dmareg sstat; /* Source Status not implemented in core */
+ struct dmareg dstat; /* Destination Status not implemented in core*/
+ struct dmareg sstatar; /* Source Status Address not impl in core */
+ struct dmareg dstatar; /* Destination Status Address not implemente */
+ struct dmareg cfg; /* Config */
+ struct dmareg sgr; /* Source Gather */
+ struct dmareg dsr; /* Destination Scatter */
+};
+
+/* Generic Interrupt Registers */
+struct dma_interrupt_regs {
+ struct dmareg tfr; /* Transfer Interrupt */
+ struct dmareg block; /* Block Interrupt */
+ struct dmareg srctran; /* Source Transfer Interrupt */
+ struct dmareg dsttran; /* Dest Transfer Interrupt */
+ struct dmareg error; /* Error */
+};
+
+struct ahb_dma_regs {
+ struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS];
+ struct dma_interrupt_regs interrupt_raw; /* Raw Interrupt */
+ struct dma_interrupt_regs interrupt_status; /* Interrupt Status */
+ struct dma_interrupt_regs interrupt_mask; /* Interrupt Mask */
+ struct dma_interrupt_regs interrupt_clear; /* Interrupt Clear */
+ struct dmareg statusInt; /* Interrupt combined*/
+ struct dmareg rq_srcreg; /* Src Trans Req */
+ struct dmareg rq_dstreg; /* Dst Trans Req */
+ struct dmareg rq_sgl_srcreg; /* Sngl Src Trans Req*/
+ struct dmareg rq_sgl_dstreg; /* Sngl Dst Trans Req*/
+ struct dmareg rq_lst_srcreg; /* Last Src Trans Req*/
+ struct dmareg rq_lst_dstreg; /* Last Dst Trans Req*/
+ struct dmareg dma_cfg; /* DMA Config */
+ struct dmareg dma_chan_en; /* DMA Channel Enable*/
+ struct dmareg dma_id; /* DMA ID */
+ struct dmareg dma_test; /* DMA Test */
+ struct dmareg res1; /* reserved */
+ struct dmareg res2; /* reserved */
+
+ /* DMA Comp Params
+ * Param 6 = dma_param[0], Param 5 = dma_param[1],
+ * Param 4 = dma_param[2] ...
+ */
+ struct dmareg dma_params[6];
+};
+
+/* Data structure for linked list item */
+struct lli {
+ u32 sar; /* Source Address */
+ u32 dar; /* Destination address */
+ u32 llp; /* Linked List Pointer */
+ struct dmareg ctl; /* Control */
+ struct dmareg dstat; /* Destination Status */
+};
+
+enum {
+ SATA_DWC_DMAC_LLI_SZ = (sizeof(struct lli)),
+ SATA_DWC_DMAC_LLI_NUM = 256,
+ SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
+ SATA_DWC_DMAC_LLI_NUM),
+ SATA_DWC_DMAC_TWIDTH_BYTES = 4,
+ SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
+ SATA_DWC_DMAC_TWIDTH_BYTES),
+};
+
+/* DMA Register Operation Bits */
+
+enum {
+ DMA_EN = 0x00000001, /* Enable AHB DMA */
+ /* Control Register */
+
+ DMA_CTL_LLP_SRCEN = 0x10000000, /* Blk chain enable Src */
+ DMA_CTL_LLP_DSTEN = 0x08000000, /* Blk chain enable Dst */
+};
+
+#define DMA_CTL_BLK_TS(size) ((size) & 0x000000FFF) /* Blk Transfer size */
+#define DMA_CHANNEL(ch) (0x00000001 << (ch)) /* Select channel */
+ /* Enable channel */
+#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \
+ ((0x000000001 << (ch)) << 8))
+ /* Disable channel */
+#define DMA_DISABLE_CHAN(ch) (0x00000000 | ((0x000000001 << (ch)) << 8))
+ /* Transfer Type & Flow Controller */
+#define DMA_CTL_TTFC(type) (((type) & 0x7) << 20)
+#define DMA_CTL_SMS(num) (((num) & 0x3) << 25) /* Src Master Select */
+#define DMA_CTL_DMS(num) (((num) & 0x3) << 23)/* Dst Master Select */
+ /* Src Burst Transaction Length */
+#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
+ /* Dst Burst Transaction Length */
+#define DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
+ /* Source Transfer Width */
+#define DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
+ /* Destination Transfer Width */
+#define DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
+
+/* Assign HW handshaking interface (x) to destination / source peripheral */
+#define DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
+#define DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
+#define DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
+
+/*
+ * This define is used to set block chaining disabled in the control low
+ * register. It is already in little endian format so it can be &'d dirctly.
+ * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
+ */
+enum {
+ DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
+ DMA_CTL_TTFC_P2M_DMAC = 0x00000002, /* Per to mem, DMAC cntr */
+ DMA_CTL_TTFC_M2P_PER = 0x00000003, /* Mem to per, peripheral cntr */
+ DMA_CTL_SINC_INC = 0x00000000, /* Source Address Increment */
+ DMA_CTL_SINC_DEC = 0x00000200,
+ DMA_CTL_SINC_NOCHANGE = 0x00000400,
+ DMA_CTL_DINC_INC = 0x00000000, /* Destination Address Increment */
+ DMA_CTL_DINC_DEC = 0x00000080,
+ DMA_CTL_DINC_NOCHANGE = 0x00000100,
+ DMA_CTL_INT_EN = 0x00000001, /* Interrupt Enable */
+
+/* Channel Configuration Register high bits */
+ DMA_CFG_FCMOD_REQ = 0x00000001, /* Flow Control - request based */
+ DMA_CFG_PROTCTL = (0x00000003 << 2),/* Protection Control */
+
+/* Channel Configuration Register low bits */
+ DMA_CFG_RELD_DST = 0x80000000, /* Reload Dest / Src Addr */
+ DMA_CFG_RELD_SRC = 0x40000000,
+ DMA_CFG_HS_SELSRC = 0x00000800, /* Software handshake Src/ Dest */
+ DMA_CFG_HS_SELDST = 0x00000400,
+ DMA_CFG_FIFOEMPTY = (0x00000001 << 9), /* FIFO Empty bit */
+
+/* Channel Linked List Pointer Register */
+
+ DMA_LLP_AHBMASTER1 = 0, /* List Master Select */
+ DMA_LLP_AHBMASTER2 = 1,
+
+ SATA_DWC_MAX_PORTS = 1,
+
+ SATA_DWC_SCR_OFFSET = 0x24,
+ SATA_DWC_REG_OFFSET = 0x64,
+
+};
+
+/* DWC SATA Registers */
+struct sata_dwc_regs {
+ u32 fptagr; /* 1st party DMA tag */
+ u32 fpbor; /* 1st party DMA buffer offset */
+ u32 fptcr; /* 1st party DMA Xfr count */
+ u32 dmacr; /* DMA Control */
+ u32 dbtsr; /* DMA Burst Transac size */
+ u32 intpr; /* Interrupt Pending */
+ u32 intmr; /* Interrupt Mask */
+ u32 errmr; /* Error Mask */
+ u32 llcr; /* Link Layer Control */
+ u32 phycr; /* PHY Control */
+ u32 physr; /* PHY Status */
+ u32 rxbistpd; /* Recvd BIST pattern def register */
+ u32 rxbistpd1; /* Recvd BIST data dword1 */
+ u32 rxbistpd2; /* Recvd BIST pattern data dword2 */
+ u32 txbistpd; /* Trans BIST pattern def register */
+ u32 txbistpd1; /* Trans BIST data dword1 */
+ u32 txbistpd2; /* Trans BIST data dword2 */
+ u32 bistcr; /* BIST Control Register */
+ u32 bistfctr; /* BIST FIS Count Register */
+ u32 bistsr; /* BIST Status Register */
+ u32 bistdecr; /* BIST Dword Error count register */
+ u32 res[15]; /* Reserved locations */
+ u32 testr; /* Test Register */
+ u32 versionr; /* Version Register */
+ u32 idr; /* ID Register */
+ u32 unimpl[192]; /* Unimplemented */
+ u32 dmadr[256]; /* FIFO Locations in DMA Mode */
+};
+
+enum {
+ SCR_SCONTROL_DET_ENABLE = 0x00000001,
+ SCR_SSTATUS_DET_PRESENT = 0x00000001,
+ SCR_SERROR_DIAG_X = 0x04000000,
+
+/* DWC SATA Register Operations */
+ SATA_DWC_TXFIFO_DEPTH = 0x01FF,
+ SATA_DWC_RXFIFO_DEPTH = 0x01FF,
+
+ SATA_DWC_DMACR_TMOD_TXCHEN = 0x00000004,
+ SATA_DWC_DMACR_TXCHEN = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN),
+ SATA_DWC_DMACR_RXCHEN = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN),
+
+ SATA_DWC_DMACR_TXRXCH_CLEAR = SATA_DWC_DMACR_TMOD_TXCHEN,
+
+
+ SATA_DWC_INTPR_DMAT = 0x00000001,
+ SATA_DWC_INTPR_NEWFP = 0x00000002,
+ SATA_DWC_INTPR_PMABRT = 0x00000004,
+ SATA_DWC_INTPR_ERR = 0x00000008,
+ SATA_DWC_INTPR_NEWBIST = 0x00000010,
+ SATA_DWC_INTPR_IPF = 0x10000000,
+ SATA_DWC_INTMR_DMATM = 0x00000001,
+ SATA_DWC_INTMR_NEWFPM = 0x00000002,
+ SATA_DWC_INTMR_PMABRTM = 0x00000004,
+ SATA_DWC_INTMR_ERRM = 0x00000008,
+ SATA_DWC_INTMR_NEWBISTM = 0x00000010,
+ SATA_DWC_LLCR_SCRAMEN = 0x00000001,
+ SATA_DWC_LLCR_DESCRAMEN = 0x00000002,
+ SATA_DWC_LLCR_RPDEN = 0x00000004,
+/* This is all error bits, zero's are reserved fields. */
+ SATA_DWC_SERROR_ERR_BITS = 0x0FFF0F03
+
+};
+
+#define SATA_DWC_SCR0_SPD_GET(v) (((v) >> 4) & 0x0000000F)
+#define SATA_DWC_DMACR_TX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_TXCHEN) |\
+ SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_RX_CLEAR(v) (((v) & ~SATA_DWC_DMACR_RXCHEN) |\
+ SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DBTSR_MWR(size) (((size)/4) & SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size) ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\
+ << 16)
+struct sata_dwc_device {
+ struct device *dev; /* generic device struct */
+ struct ata_probe_ent *pe; /* ptr to probe-ent */
+ struct ata_host *host;
+ u8 *reg_base;
+ struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
+ int irq_dma;
+};
+
+#define SATA_DWC_QCMD_MAX 32
+
+struct sata_dwc_device_port {
+ struct sata_dwc_device *hsdev;
+ int cmd_issued[SATA_DWC_QCMD_MAX];
+ struct lli *llit[SATA_DWC_QCMD_MAX]; /* DMA LLI table */
+ dma_addr_t llit_dma[SATA_DWC_QCMD_MAX];
+ u32 dma_chan[SATA_DWC_QCMD_MAX];
+ int dma_pending[SATA_DWC_QCMD_MAX];
+};
+
+/*
+ * Commonly used DWC SATA driver Macros
+ */
+#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\
+ (host)->private_data)
+#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\
+ (ap)->host->private_data)
+#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\
+ (ap)->private_data)
+#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\
+ (qc)->ap->host->private_data)
+#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\
+ (hsdevp)->hsdev)
+
+enum {
+ SATA_DWC_CMD_ISSUED_NOT = 0,
+ SATA_DWC_CMD_ISSUED_PEND = 1,
+ SATA_DWC_CMD_ISSUED_EXEC = 2,
+ SATA_DWC_CMD_ISSUED_NODATA = 3,
+
+ SATA_DWC_DMA_PENDING_NONE = 0,
+ SATA_DWC_DMA_PENDING_TX = 1,
+ SATA_DWC_DMA_PENDING_RX = 2,
+};
+
+struct sata_dwc_host_priv {
+
+ void __iomem *scr_addr_sstatus;
+ u32 sata_dwc_sactive_issued ;
+ u32 sata_dwc_sactive_queued ;
+ u32 dma_interrupt_count;
+ struct ahb_dma_regs *sata_dma_regs;
+ struct device *dwc_dev;
+
+};
+struct sata_dwc_host_priv host_pvt;
+/*
+ * Prototypes
+ */
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u32 check_status);
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+static void sata_dwc_port_stop(struct ata_port *ap);
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
+static void dma_dwc_exit(struct sata_dwc_device *hsdev);
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+ struct lli *lli, dma_addr_t dma_lli,
+ void __iomem *addr, int dir);
+static void dma_dwc_xfer_start(int dma_ch);
+
+static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+{
+ dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
+ "0x%lx device: %x\n", tf->command, ata_get_cmd_descript\
+ (tf->protocol), tf->flags, tf->device);
+ dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
+ "lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
+ tf->lbam, tf->lbah);
+ dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x "
+ "hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
+ tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
+ tf->hob_lbah);
+}
+
+/******************************************************************************
+ * Function: get_burst_length_encode
+ * arguments: datalength: length in bytes of data
+ * returns value to be programmed in register corrresponding to data length
+ * This value is effectively the log(base 2) of the length
+ *****************************************************************************/
+static int get_burst_length_encode(int datalength)
+{
+ int items = datalength >> 2; /* div by 4 to get lword count */
+
+ if (items >= 64)
+ return 5;
+
+ if (items >= 32)
+ return 4;
+
+ if (items >= 16)
+ return 3;
+
+ if (items >= 8)
+ return 2;
+
+ if (items >= 4)
+ return 1;
+
+ return 0;
+}
+
+static void clear_chan_interrupts(int c)
+{
+
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
+ DMA_CHANNEL(c));
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
+ DMA_CHANNEL(c));
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
+ DMA_CHANNEL(c));
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
+ DMA_CHANNEL(c));
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
+ DMA_CHANNEL(c));
+}
+
+/******************************************************************************
+ * Function: dma_request_channel
+ * arguments: None
+ * returns channel number if available else -1
+ * This function assigns the next available DMA channel from the list to the
+ * requester
+ *****************************************************************************/
+static int dma_request_channel(void)
+{
+ int i;
+
+ for (i = 0; i < DMA_NUM_CHANS; i++) {
+ if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &\
+ DMA_CHANNEL(i)))
+ return i;
+ }
+
+ /* TODO this should maybe change to warn of info */
+ dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__,
+ in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)));
+
+ return -1;
+}
+
+/******************************************************************************
+ * Function: dma_dwc_interrupt
+ * arguments: irq, dev_id, pt_regs
+ * returns channel number if available else -1
+ * Interrupt Handler for DW AHB SATA DMA
+ *****************************************************************************/
+static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
+{
+ int chan;
+ u32 tfr_reg, err_reg;
+ unsigned long flags;
+ struct sata_dwc_device *hsdev =
+ (struct sata_dwc_device *)hsdev_instance;
+ struct ata_host *host = (struct ata_host *)hsdev->host;
+ struct ata_port *ap;
+ struct sata_dwc_device_port *hsdevp;
+ u8 tag = 0;
+ unsigned int port = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ ap = host->ports[port];
+ hsdevp = HSDEVP_FROM_AP(ap);
+ tag = ap->link.active_tag;
+
+ tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
+ .low));
+ err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
+ .low));
+
+ dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
+ tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
+
+ for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+ /* Check for end-of-transfer interrupt. */
+ if (tfr_reg & DMA_CHANNEL(chan)) {
+ /* Each DMA command produces 2 interrupts. Only
+ * complete the command after both interrupts have been
+ * seen. (See sata_dwc_isr())
+ */
+ host_pvt.dma_interrupt_count++;
+
+ sata_dwc_clear_dmacr(hsdevp, tag);
+
+ if (hsdevp->dma_pending[tag] ==
+ SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "DMA not pending eot=0x%08x "
+ "err=0x%08x tag=0x%02x pending=%d\n",
+ tfr_reg, err_reg, tag,
+ hsdevp->dma_pending[tag]);
+ }
+
+ if ((host_pvt.dma_interrupt_count % 2) == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+
+ /* Clear the interrupt */
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+ .tfr.low),
+ DMA_CHANNEL(chan));
+ }
+
+ /* Check for error interrupt. */
+ if (err_reg & DMA_CHANNEL(chan)) {
+ /* TODO Need error handler ! */
+ dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
+ err_reg);
+
+ /* Clear the interrupt. */
+ out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+ .error.low),
+ DMA_CHANNEL(chan));
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ * Function: dma_request_interrupts
+ * arguments: hsdev
+ * returns status
+ * This function registers ISR for a particular DMA channel interrupt
+ *****************************************************************************/
+static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
+{
+ int retval = 0;
+ int chan;
+
+ for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+ /* Unmask error interrupt */
+ out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
+ DMA_ENABLE_CHAN(chan));
+
+ /* Unmask end-of-transfer interrupt */
+ out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
+ DMA_ENABLE_CHAN(chan));
+ }
+
+ retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
+ if (retval) {
+ dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
+ __func__, irq);
+ return -ENODEV;
+ }
+
+ /* Mark this interrupt as requested */
+ hsdev->irq_dma = irq;
+
+ return 0;
+}
+
+/******************************************************************************
+ * Function: map_sg_to_lli
+ * arguments: sg: scatter/gather list(sg)
+ * num_elems: no of elements in sg list
+ * dma_lli: LLI table
+ * dest: destination address
+ * read: whether the transfer is read or write
+ * returns array of AHB DMA Linked List Items
+ * This function creates a list of LLIs for DMA Xfr and returns the number
+ * of elements in the DMA linked list.
+ *
+ * The Synopsis driver has a comment proposing that better performance
+ * is possible by only enabling interrupts on the last item in the linked list.
+ * However, it seems that could be a problem if an error happened on one of the
+ * first items. The transfer would halt, but no error interrupt would occur.
+ *
+ * Currently this function sets interrupts enabled for each linked list item:
+ * DMA_CTL_INT_EN.
+ *****************************************************************************/
+static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
+ struct lli *lli, dma_addr_t dma_lli,
+ void __iomem *dmadr_addr, int dir)
+{
+ int i, idx = 0;
+ int fis_len = 0;
+ dma_addr_t next_llp;
+ int bl;
+
+ dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x"
+ " dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
+ (u32)dmadr_addr);
+
+ bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
+
+ for (i = 0; i < num_elems; i++, sg++) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
+ "=%d\n", __func__, i, addr, sg_len);
+
+ while (sg_len) {
+
+ if (idx >= SATA_DWC_DMAC_LLI_NUM) {
+ /* The LLI table is not large enough. */
+ dev_err(host_pvt.dwc_dev, "LLI table overrun "
+ "(idx=%d)\n", idx);
+ break;
+ }
+ len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
+ SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
+
+ offset = addr & 0xffff;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ /*
+ * Make sure a LLI block is not created that will span
+ * 8K max FIS boundary. If the block spans such a FIS
+ * boundary, there is a chance that a DMA burst will
+ * cross that boundary -- this results in an error in
+ * the host controller.
+ */
+ if (fis_len + len > 8192) {
+ dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
+ "%d(0x%x) len=%d(0x%x)\n", fis_len,
+ fis_len, len, len);
+ len = 8192 - fis_len;
+ fis_len = 0;
+ } else {
+ fis_len += len;
+ }
+ if (fis_len == 8192)
+ fis_len = 0;
+
+ /*
+ * Set DMA addresses and lower half of control register
+ * based on direction.
+ */
+ if (dir == DMA_FROM_DEVICE) {
+ lli[idx].dar = cpu_to_le32(addr);
+ lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+
+ lli[idx].ctl.low = cpu_to_le32(
+ DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+ DMA_CTL_SMS(0) |
+ DMA_CTL_DMS(1) |
+ DMA_CTL_SRC_MSIZE(bl) |
+ DMA_CTL_DST_MSIZE(bl) |
+ DMA_CTL_SINC_NOCHANGE |
+ DMA_CTL_SRC_TRWID(2) |
+ DMA_CTL_DST_TRWID(2) |
+ DMA_CTL_INT_EN |
+ DMA_CTL_LLP_SRCEN |
+ DMA_CTL_LLP_DSTEN);
+ } else { /* DMA_TO_DEVICE */
+ lli[idx].sar = cpu_to_le32(addr);
+ lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+
+ lli[idx].ctl.low = cpu_to_le32(
+ DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+ DMA_CTL_SMS(1) |
+ DMA_CTL_DMS(0) |
+ DMA_CTL_SRC_MSIZE(bl) |
+ DMA_CTL_DST_MSIZE(bl) |
+ DMA_CTL_DINC_NOCHANGE |
+ DMA_CTL_SRC_TRWID(2) |
+ DMA_CTL_DST_TRWID(2) |
+ DMA_CTL_INT_EN |
+ DMA_CTL_LLP_SRCEN |
+ DMA_CTL_LLP_DSTEN);
+ }
+
+ dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
+ "0x%08x val: 0x%08x\n", __func__,
+ len, DMA_CTL_BLK_TS(len / 4));
+
+ /* Program the LLI CTL high register */
+ lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
+ (len / 4));
+
+ /* Program the next pointer. The next pointer must be
+ * the physical address, not the virtual address.
+ */
+ next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
+ lli)));
+
+ /* The last 2 bits encode the list master select. */
+ next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
+
+ lli[idx].llp = cpu_to_le32(next_llp);
+
+ idx++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ /*
+ * The last next ptr has to be zero and the last control low register
+ * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
+ * and destination enable) set back to 0 (disabled.) This is what tells
+ * the core that this is the last item in the linked list.
+ */
+ if (idx) {
+ lli[idx-1].llp = 0x00000000;
+ lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+
+ /* Flush cache to memory */
+ dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
+ DMA_BIDIRECTIONAL);
+ }
+
+ return idx;
+}
+
+/******************************************************************************
+ * Function: dma_dwc_xfer_start
+ * arguments: Channel number
+ * Return : None
+ * Enables the DMA channel
+ *****************************************************************************/
+static void dma_dwc_xfer_start(int dma_ch)
+{
+ /* Enable the DMA channel */
+ out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
+ in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
+ DMA_ENABLE_CHAN(dma_ch));
+}
+
+
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+ struct lli *lli, dma_addr_t dma_lli,
+ void __iomem *addr, int dir)
+{
+ int dma_ch;
+ int num_lli;
+ dma_ch = dma_request_channel();
+ /* Acquire DMA channel */
+ if (dma_ch == -1) {
+ dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+ __func__);
+ return -EAGAIN;
+ }
+
+ /* Convert SG list to linked list of items (LLIs) for AHB DMA */
+ num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
+
+ dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
+ " 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
+ lli, (u32)dma_lli, addr, num_lli);
+
+ /* Clear channel interrupts */
+ clear_chan_interrupts(dma_ch);
+
+ /* Program the CFG register. */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
+ DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+
+ /* Program the address of the linked list */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
+ DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
+
+ /* Program the CTL register with src enable / dst enable */
+ out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
+ DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
+
+ return 0;
+}
+
+/*****************************************************************************
+ * Function: dma_dwc_exit
+ * arguments: None
+ * returns status
+ * This function exits the SATA DMA driver
+ *****************************************************************************/
+static void dma_dwc_exit(struct sata_dwc_device *hsdev)
+{
+ dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
+ if (host_pvt.sata_dma_regs)
+ iounmap(host_pvt.sata_dma_regs);
+
+ if (hsdev->irq_dma)
+ free_irq(hsdev->irq_dma, hsdev);
+}
+
+/*****************************************************************************
+ * Function: dma_dwc_init
+ * arguments: hsdev
+ * returns status
+ * This function initializes the SATA DMA driver
+ *****************************************************************************/
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
+{
+ int err;
+ err = dma_request_interrupts(hsdev, irq);
+ if (err) {
+ dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
+ " %d\n", __func__, err);
+ goto error_out;
+ }
+
+ /* Enabe DMA */
+ out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+
+ dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
+ dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
+ sata_dma_regs);
+
+ return 0;
+
+error_out:
+ dma_dwc_exit(hsdev);
+
+ return err;
+}
+
+static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+ if (scr > SCR_NOTIFICATION) {
+ dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+ __func__, scr);
+ return -EINVAL;
+ }
+
+ *val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+ __func__, link->ap->print_id, scr, *val);
+
+ return 0;
+}
+
+static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+ __func__, link->ap->print_id, scr, val);
+ if (scr > SCR_NOTIFICATION) {
+ dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+ __func__, scr);
+ return -EINVAL;
+ }
+ out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+ return 0;
+}
+
+static u32 core_scr_read(unsigned int scr)
+{
+ return in_le32((void __iomem *)(host_pvt.scr_addr_sstatus) +\
+ (scr * 4));
+}
+
+static void core_scr_write(unsigned int scr, u32 val)
+{
+ out_le32((void __iomem *)(host_pvt.scr_addr_sstatus) + (scr * 4),
+ val);
+}
+
+static void clear_serror(void)
+{
+ u32 val;
+ val = core_scr_read(SCR_ERROR);
+ core_scr_write(SCR_ERROR, val);
+
+}
+
+static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+{
+ out_le32(&hsdev->sata_dwc_regs->intpr,
+ in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static u32 qcmd_tag_to_mask(u8 tag)
+{
+ return 0x00000001 << (tag & 0x1f);
+}
+
+/* See ahci.c */
+static void sata_dwc_error_intr(struct ata_port *ap,
+ struct sata_dwc_device *hsdev, uint intpr)
+{
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ unsigned int err_mask = 0, action = 0;
+ struct ata_queued_cmd *qc;
+ u32 serror;
+ u8 status, tag;
+ u32 err_reg;
+
+ ata_ehi_clear_desc(ehi);
+
+ serror = core_scr_read(SCR_ERROR);
+ status = ap->ops->sff_check_status(ap);
+
+ err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
+ low));
+ tag = ap->link.active_tag;
+
+ dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
+ "dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
+ __func__, serror, intpr, status, host_pvt.dma_interrupt_count,
+ hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+
+ /* Clear error register and interrupt bit */
+ clear_serror();
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
+
+ /* This is the only error happening now. TODO check for exact error */
+
+ err_mask |= AC_ERR_HOST_BUS;
+ action |= ATA_EH_RESET;
+
+ /* Pass this on to EH */
+ ehi->serror |= serror;
+ ehi->action |= action;
+
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ ata_port_abort(ap);
+}
+
+/******************************************************************************
+ * Function : sata_dwc_isr
+ * arguments : irq, void *dev_instance, struct pt_regs *regs
+ * Return value : irqreturn_t - status of IRQ
+ * This Interrupt handler called via port ops registered function.
+ * .irq_handler = sata_dwc_isr
+ *****************************************************************************/
+static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+{
+ struct ata_host *host = (struct ata_host *)dev_instance;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ u8 status, tag;
+ int handled, num_processed, port = 0;
+ uint intpr, sactive, sactive2, tag_mask;
+ struct sata_dwc_device_port *hsdevp;
+ host_pvt.sata_dwc_sactive_issued = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Read the interrupt register */
+ intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+
+ ap = host->ports[port];
+ hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr,
+ ap->link.active_tag);
+
+ /* Check for error interrupt */
+ if (intpr & SATA_DWC_INTPR_ERR) {
+ sata_dwc_error_intr(ap, hsdev, intpr);
+ handled = 1;
+ goto DONE;
+ }
+
+ /* Check for DMA SETUP FIS (FP DMA) interrupt */
+ if (intpr & SATA_DWC_INTPR_NEWFP) {
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+ tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
+ dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+ if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
+ dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+ host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+
+ qc = ata_qc_from_tag(ap, tag);
+ /* Start FP DMA for NCQ command. At this point the tag is the
+ * active tag. It is the tag that matches the command about to
+ * be completed.
+ */
+ qc->ap->link.active_tag = tag;
+ sata_dwc_bmdma_start_by_tag(qc, tag);
+
+ handled = 1;
+ goto DONE;
+ }
+
+ sactive = core_scr_read(SCR_ACTIVE);
+ tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+ /* If no sactive issued and tag_mask is zero then this is not NCQ */
+ if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+ if (ap->link.active_tag == ATA_TAG_POISON)
+ tag = 0;
+ else
+ tag = ap->link.active_tag;
+ qc = ata_qc_from_tag(ap, tag);
+
+ /* DEV interrupt w/ no active qc? */
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+ dev_err(ap->dev, "%s interrupt with no active qc "
+ "qc=%p\n", __func__, qc);
+ ap->ops->sff_check_status(ap);
+ handled = 1;
+ goto DONE;
+ }
+
+ status = ap->ops->sff_check_status(ap);
+
+ qc->ap->link.active_tag = tag;
+ hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+ if (status & ATA_ERR) {
+ dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
+ sata_dwc_qc_complete(ap, qc, 1);
+ handled = 1;
+ goto DONE;
+ }
+
+ dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
+ __func__, ata_get_cmd_descript(qc->tf.protocol));
+DRVSTILLBUSY:
+ if (ata_is_dma(qc->tf.protocol)) {
+ /* Each DMA transaction produces 2 interrupts. The DMAC
+ * transfer complete interrupt and the SATA controller
+ * operation done interrupt. The command should be
+ * completed only after both interrupts are seen.
+ */
+ host_pvt.dma_interrupt_count++;
+ if (hsdevp->dma_pending[tag] == \
+ SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "%s: DMA not pending "
+ "intpr=0x%08x status=0x%08x pending"
+ "=%d\n", __func__, intpr, status,
+ hsdevp->dma_pending[tag]);
+ }
+
+ if ((host_pvt.dma_interrupt_count % 2) == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+ } else if (ata_is_pio(qc->tf.protocol)) {
+ ata_sff_hsm_move(ap, qc, status, 0);
+ handled = 1;
+ goto DONE;
+ } else {
+ if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+ goto DRVSTILLBUSY;
+ }
+
+ handled = 1;
+ goto DONE;
+ }
+
+ /*
+ * This is a NCQ command. At this point we need to figure out for which
+ * tags we have gotten a completion interrupt. One interrupt may serve
+ * as completion for more than one operation when commands are queued
+ * (NCQ). We need to process each completed command.
+ */
+
+ /* process completed commands */
+ sactive = core_scr_read(SCR_ACTIVE);
+ tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+ if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
+ tag_mask > 1) {
+ dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x sactive_issued=0x%08x"
+ "tag_mask=0x%08x\n", __func__, sactive,
+ host_pvt.sata_dwc_sactive_issued, tag_mask);
+ }
+
+ if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
+ (host_pvt.sata_dwc_sactive_issued)) {
+ dev_warn(ap->dev, "Bad tag mask? sactive=0x%08x "
+ "(host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask"
+ "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued,
+ tag_mask);
+ }
+
+ /* read just to clear ... not bad if currently still busy */
+ status = ap->ops->sff_check_status(ap);
+ dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);
+
+ tag = 0;
+ num_processed = 0;
+ while (tag_mask) {
+ num_processed++;
+ while (!(tag_mask & 0x00000001)) {
+ tag++;
+ tag_mask <<= 1;
+ }
+ tag_mask &= (~0x00000001);
+ qc = ata_qc_from_tag(ap, tag);
+
+ /* To be picked up by completion functions */
+ qc->ap->link.active_tag = tag;
+ hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+ /* Let libata/scsi layers handle error */
+ if (status & ATA_ERR) {
+ dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__,
+ status);
+ sata_dwc_qc_complete(ap, qc, 1);
+ handled = 1;
+ goto DONE;
+ }
+
+ /* Process completed command */
+ dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
+ ata_get_cmd_descript(qc->tf.protocol));
+ if (ata_is_dma(qc->tf.protocol)) {
+ host_pvt.dma_interrupt_count++;
+ if (hsdevp->dma_pending[tag] == \
+ SATA_DWC_DMA_PENDING_NONE)
+ dev_warn(ap->dev, "%s: DMA not pending?\n",
+ __func__);
+ if ((host_pvt.dma_interrupt_count % 2) == 0)
+ sata_dwc_dma_xfer_complete(ap, 1);
+ } else {
+ if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+ goto STILLBUSY;
+ }
+ continue;
+
+STILLBUSY:
+ ap->stats.idle_irq++;
+ dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
+ ap->print_id);
+ } /* while tag_mask */
+
+ /*
+ * Check to see if any commands completed while we were processing our
+ * initial set of completed commands (read status clears interrupts,
+ * so we might miss a completed command interrupt if one came in while
+ * we were processing --we read status as part of processing a completed
+ * command).
+ */
+ sactive2 = core_scr_read(SCR_ACTIVE);
+ if (sactive2 != sactive) {
+ dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2"
+ "=0x%x\n", sactive, sactive2);
+ }
+ handled = 1;
+
+DONE:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_RETVAL(handled);
+}
+
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+{
+ struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_RX_CLEAR(
+ in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+ } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_TX_CLEAR(
+ in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+ } else {
+ /* This should not happen, it indicates the driver is out of
+ * sync. If it does happen, clear dmacr anyway.
+ */
+ dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and"
+ "TX DMA not pending tag=0x%02x pending=%d"
+ " dmacr: 0x%08x\n", __func__, tag,
+ hsdevp->dma_pending[tag],
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ out_le32(&(hsdev->sata_dwc_regs->dmacr),
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
+ }
+}
+
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+{
+ struct ata_queued_cmd *qc;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ u8 tag = 0;
+
+ tag = ap->link.active_tag;
+ qc = ata_qc_from_tag(ap, tag);
+ if (!qc) {
+ dev_err(ap->dev, "failed to get qc");
+ return;
+ }
+
+#ifdef DEBUG_NCQ
+ if (tag > 0) {
+ dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
+ "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+ ata_get_cmd_descript(qc->dma_dir),
+ ata_get_cmd_descript(qc->tf.protocol),
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ }
+#endif
+
+ if (ata_is_dma(qc->tf.protocol)) {
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+ dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
+ "pending dmacr: 0x%08x\n", __func__,
+ in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+ }
+
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+ sata_dwc_qc_complete(ap, qc, check_status);
+ ap->link.active_tag = ATA_TAG_POISON;
+ } else {
+ sata_dwc_qc_complete(ap, qc, check_status);
+ }
+}
+
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u32 check_status)
+{
+ u8 status = 0;
+ int i = 0;
+ u32 mask = 0x0;
+ u8 tag = qc->tag;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ u32 serror;
+ host_pvt.sata_dwc_sactive_queued = 0;
+ dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
+ dev_err(ap->dev, "TX DMA PENDING\n");
+ else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
+ dev_err(ap->dev, "RX DMA PENDING\n");
+ dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
+ " protocol=%d\n", qc->tf.command, status, ap->print_id,
+ qc->tf.protocol);
+
+ /* clear active bit */
+ mask = (~(qcmd_tag_to_mask(tag)));
+ host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
+ & mask;
+ host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
+ & mask;
+
+ ata_qc_complete(qc);
+
+ return 0;
+}
+
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+{
+ /* Enable selective interrupts by setting the interrupt maskregister*/
+ out_le32(&hsdev->sata_dwc_regs->intmr,
+ SATA_DWC_INTMR_ERRM |
+ SATA_DWC_INTMR_NEWFPM |
+ SATA_DWC_INTMR_PMABRTM |
+ SATA_DWC_INTMR_DMATM);
+
+ /* Unmask the error bits that should trigger an error interrupt by
+ * setting the error mask register.
+ */
+ out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+ dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+ __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
+ in_le32(&hsdev->sata_dwc_regs->errmr));
+}
+
+static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr = (void *)base + 0x00;
+ port->data_addr = (void *)base + 0x00;
+
+ port->error_addr = (void *)base + 0x04;
+ port->feature_addr = (void *)base + 0x04;
+
+ port->nsect_addr = (void *)base + 0x08;
+
+ port->lbal_addr = (void *)base + 0x0c;
+ port->lbam_addr = (void *)base + 0x10;
+ port->lbah_addr = (void *)base + 0x14;
+
+ port->device_addr = (void *)base + 0x18;
+ port->command_addr = (void *)base + 0x1c;
+ port->status_addr = (void *)base + 0x1c;
+
+ port->altstatus_addr = (void *)base + 0x20;
+ port->ctl_addr = (void *)base + 0x20;
+}
+
+/******************************************************************************
+ * Function : sata_dwc_port_start
+ * arguments : struct ata_ioports *port
+ * Return value : returns 0 if success, error code otherwise
+ * This function allocates the scatter gather LLI table for AHB DMA
+ *****************************************************************************/
+static int sata_dwc_port_start(struct ata_port *ap)
+{
+ int err = 0;
+ struct sata_dwc_device *hsdev;
+ struct sata_dwc_device_port *hsdevp = NULL;
+ struct device *pdev;
+ int i;
+
+ hsdev = HSDEV_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);
+
+ hsdev->host = ap->host;
+ pdev = ap->host->dev;
+ if (!pdev) {
+ dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
+ err = -ENODEV;
+ goto CLEANUP;
+ }
+
+ /* Allocate Port Struct */
+ hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
+ if (!hsdevp) {
+ dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
+ err = -ENOMEM;
+ goto CLEANUP;
+ }
+ hsdevp->hsdev = hsdev;
+
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+ hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+ ap->prd = 0; /* set these so libata doesn't use them */
+ ap->prd_dma = 0;
+
+ /*
+ * DMA - Assign scatter gather LLI table. We can't use the libata
+ * version since it's PRD is IDE PCI specific.
+ */
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+ hsdevp->llit[i] = dma_alloc_coherent(pdev,
+ SATA_DWC_DMAC_LLI_TBL_SZ,
+ &(hsdevp->llit_dma[i]),
+ GFP_ATOMIC);
+ if (!hsdevp->llit[i]) {
+ dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
+ __func__);
+ err = -ENOMEM;
+ goto CLEANUP;
+ }
+ }
+
+ if (ap->port_no == 0) {
+ dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+ __func__);
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+ dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
+ __func__);
+ out_le32(&hsdev->sata_dwc_regs->dbtsr,
+ (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+ }
+
+ /* Clear any error bits before libata starts issuing commands */
+ clear_serror();
+
+ ap->private_data = hsdevp;
+
+CLEANUP:
+ if (err) {
+ sata_dwc_port_stop(ap);
+ dev_dbg(ap->dev, "%s: fail\n", __func__);
+ } else {
+ dev_dbg(ap->dev, "%s: done\n", __func__);
+ }
+
+ return err;
+}
+
+static void sata_dwc_port_stop(struct ata_port *ap)
+{
+ int i;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
+
+ if (hsdevp && hsdev) {
+ /* deallocate LLI table */
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+ dma_free_coherent(ap->host->dev,
+ SATA_DWC_DMAC_LLI_TBL_SZ,
+ hsdevp->llit[i], hsdevp->llit_dma[i]);
+ }
+
+ kfree(hsdevp);
+ }
+ ap->private_data = NULL;
+}
+
+/******************************************************************************
+ * Function : sata_dwc_exec_command_by_tag
+ * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
+ * Return value : None
+ * This function keeps track of individual command tag ids and calls
+ * ata_exec_command in libata
+ *****************************************************************************/
+static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+ struct ata_taskfile *tf,
+ u8 tag, u32 cmd_issued)
+{
+ unsigned long flags;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
+ ata_get_cmd_descript(tf), tag);
+
+ spin_lock_irqsave(&ap->host->lock, flags);
+ hsdevp->cmd_issued[tag] = cmd_issued;
+ spin_unlock_irqrestore(&ap->host->lock, flags);
+
+ /* Clear SError before executing a new command.
+ *
+ * TODO if we read a PM's registers now, we will throw away the task
+ * file values loaded into the shadow registers for this command.
+ *
+ * sata_dwc_scr_write and read can not be used here. Clearing the PM
+ * managed SError register for the disk needs to be done before the
+ * task file is loaded.
+ */
+ clear_serror();
+ ata_sff_exec_command(ap, tf);
+}
+
+static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
+ SATA_DWC_CMD_ISSUED_PEND);
+}
+
+static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ u8 tag = qc->tag;
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+ __func__, qc->ap->link.sactive, tag);
+ } else {
+ tag = 0;
+ }
+
+ sata_dwc_bmdma_setup_by_tag(qc, tag);
+}
+
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ int start_dma;
+ u32 reg, dma_chan;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
+ struct ata_port *ap = qc->ap;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ int dir = qc->dma_dir;
+ dma_chan = hsdevp->dma_chan[tag];
+
+ /* Used for ata_bmdma_start(qc) -- we are not BMDMA compatible */
+
+ if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
+ start_dma = 1;
+ if (dir == DMA_TO_DEVICE)
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
+ else
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
+ } else {
+ dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
+ "(tag=%d) DMA NOT started\n", __func__,
+ hsdevp->cmd_issued[tag], tag);
+ start_dma = 0;
+ }
+
+ dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
+ "start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+ ata_get_cmd_descript(qc->dma_dir), start_dma);
+ sata_dwc_tf_dump(&(qc->tf));
+
+ if (start_dma) {
+ reg = core_scr_read(SCR_ERROR);
+ if (reg & SATA_DWC_SERROR_ERR_BITS) {
+ dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+ __func__, reg);
+ }
+
+ if (dir == DMA_TO_DEVICE)
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_TXCHEN);
+ else
+ out_le32(&hsdev->sata_dwc_regs->dmacr,
+ SATA_DWC_DMACR_RXCHEN);
+
+ /* Enable AHB DMA transfer on the specified channel */
+ dma_dwc_xfer_start(dma_chan);
+ }
+}
+
+static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+{
+ u8 tag = qc->tag;
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+ __func__, qc->ap->link.sactive, tag);
+ } else {
+ tag = 0;
+ }
+
+ dev_dbg(qc->ap->dev, "%s\n", __func__);
+ sata_dwc_bmdma_start_by_tag(qc, tag);
+}
+
+/******************************************************************************
+ * Function : sata_dwc_qc_prep_by_tag
+ * arguments : ata_queued_cmd *qc, u8 tag
+ * Return value : None
+ * qc_prep for a particular queued command based on tag
+ *****************************************************************************/
+static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ u32 dma_chan;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ int err;
+
+ dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+ __func__, ap->port_no, ata_get_cmd_descript(qc->dma_dir),
+ qc->n_elem);
+
+ dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
+ hsdevp->llit_dma[tag],
+ (void *__iomem)(&hsdev->sata_dwc_regs->\
+ dmadr), qc->dma_dir);
+ if (dma_chan < 0) {
+ dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
+ __func__, err);
+ return;
+ }
+
+ hsdevp->dma_chan[tag] = dma_chan;
+}
+
+static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+{
+ u32 sactive;
+ u8 tag = qc->tag;
+ struct ata_port *ap = qc->ap;
+
+#ifdef DEBUG_NCQ
+ if (qc->tag > 0 || ap->link.sactive > 1)
+ dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
+ "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+ __func__, ap->print_id, qc->tf.command,
+ ata_get_cmd_descript(&qc->tf),
+ qc->tag, ata_get_cmd_descript(qc->tf.protocol),
+ ap->link.active_tag, ap->link.sactive);
+#endif
+
+ if (!ata_is_ncq(qc->tf.protocol))
+ tag = 0;
+
+ sata_dwc_qc_prep_by_tag(qc, tag);
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+ sactive = core_scr_read(SCR_ACTIVE);
+ sactive |= (0x00000001 << tag);
+ core_scr_write(SCR_ACTIVE, sactive);
+
+ dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
+ "sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
+ sactive);
+
+ ap->ops->sff_tf_load(ap, &qc->tf);
+ sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
+ SATA_DWC_CMD_ISSUED_PEND);
+ } else {
+ ata_sff_qc_issue(qc);
+ }
+
+ return 0;
+
+}
+
+/******************************************************************************
+ * Function : sata_dwc_qc_prep
+ * arguments : ata_queued_cmd *qc
+ * Return value : None
+ * qc_prep for a particular queued command
+ *****************************************************************************/
+
+static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+{
+ if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+ return;
+
+#ifdef DEBUG_NCQ
+ if (qc->tag > 0)
+ dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+ __func__, tag, qc->ap->link.active_tag);
+
+ return ;
+#endif
+}
+
+static void sata_dwc_error_handler(struct ata_port *ap)
+{
+ ap->link.flags |= ATA_LFLAG_NO_HRST;
+ ata_sff_error_handler(ap);
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_dwc_sht = {
+ ATA_NCQ_SHT(DRV_NAME),
+ /*
+ * test-only: Currently this driver doesn't handle NCQ
+ * correctly. We enable NCQ but set the queue depth to a
+ * max of 1. This will get fixed in in a future release.
+ */
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .can_queue = ATA_DEF_QUEUE, /* ATA_MAX_QUEUE */
+ .dma_boundary = ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations sata_dwc_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .error_handler = sata_dwc_error_handler,
+
+ .qc_prep = sata_dwc_qc_prep,
+ .qc_issue = sata_dwc_qc_issue,
+
+ .scr_read = sata_dwc_scr_read,
+ .scr_write = sata_dwc_scr_write,
+
+ .port_start = sata_dwc_port_start,
+ .port_stop = sata_dwc_port_stop,
+
+ .bmdma_setup = sata_dwc_bmdma_setup,
+ .bmdma_start = sata_dwc_bmdma_start,
+};
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+ .pio_mask = 0x1f, /* pio 0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sata_dwc_ops,
+ },
+};
+
+static int sata_dwc_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct sata_dwc_device *hsdev;
+ u32 idr, versionr;
+ char *ver = (char *)&versionr;
+ u8 *base = NULL;
+ int err = 0;
+ int irq, rc;
+ struct ata_host *host;
+ struct ata_port_info pi = sata_dwc_port_info[0];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+
+ /* Allocate DWC SATA device */
+ hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+ if (hsdev == NULL) {
+ dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+ memset(hsdev, 0, sizeof(*hsdev));
+
+ /* Ioremap SATA registers */
+ base = of_iomap(ofdev->node, 0);
+ if (!base) {
+ dev_err(&ofdev->dev, "ioremap failed for SATA register"
+ " address\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+ hsdev->reg_base = base;
+ dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+ /* Synopsys DWC SATA specific Registers */
+ hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+ /* Allocate and fill host */
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+ if (!host) {
+ dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+
+ host->private_data = hsdev;
+
+ /* Setup port */
+ host->ports[0]->ioaddr.cmd_addr = base;
+ host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+ host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+ sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
+
+ /* Read the ID and Version Registers */
+ idr = in_le32(&hsdev->sata_dwc_regs->idr);
+ versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
+ dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+ idr, ver[0], ver[1], ver[2]);
+
+ /* Get SATA DMA interrupt number */
+ irq = irq_of_parse_and_map(ofdev->node, 1);
+ if (irq == NO_IRQ) {
+ dev_err(&ofdev->dev, "no SATA DMA irq\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /* Get physical SATA DMA register base address */
+ host_pvt.sata_dma_regs = of_iomap(ofdev->node, 1);
+ if (!(host_pvt.sata_dma_regs)) {
+ dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
+ " address\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /* Save dev for later use in dev_xxx() routines */
+ host_pvt.dwc_dev = &ofdev->dev;
+
+ /* Initialize AHB DMAC */
+ dma_dwc_init(hsdev, irq);
+
+ /* Enable SATA Interrupts */
+ sata_dwc_enable_interrupts(hsdev);
+
+ /* Get SATA interrupt number */
+ irq = irq_of_parse_and_map(ofdev->node, 0);
+ if (irq == NO_IRQ) {
+ dev_err(&ofdev->dev, "no SATA DMA irq\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+
+ /*
+ * Now, register with libATA core, this will also initiate the
+ * device discovery process, invoking our port_start() handler &
+ * error_handler() to execute a dummy Softreset EH session
+ */
+ rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+
+ if (rc != 0)
+ dev_err(&ofdev->dev, "failed to activate host");
+
+ dev_set_drvdata(&ofdev->dev, host);
+
+ /* Everything is fine */
+ return 0;
+
+error_out:
+ /* Free SATA DMA resources */
+ dma_dwc_exit(hsdev);
+
+ if (base)
+ iounmap(base);
+ return err;
+}
+
+static int sata_dwc_remove(struct of_device *ofdev)
+{
+ struct device *dev = &ofdev->dev;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct sata_dwc_device *hsdev = host->private_data;
+
+ ata_host_detach(host);
+
+ dev_set_drvdata(dev, NULL);
+
+ /* Free SATA DMA resources */
+ dma_dwc_exit(hsdev);
+
+ iounmap(hsdev->reg_base);
+ kfree(hsdev);
+ kfree(host);
+
+ dev_dbg(&ofdev->dev, "done\n");
+
+ return 0;
+}
+
+static const struct of_device_id sata_dwc_match[] = {
+ { .compatible = "amcc,sata-460ex", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sata_dwc_match);
+
+static struct of_platform_driver sata_dwc_driver = {
+ .name = "sata-dwc",
+ .match_table = sata_dwc_match,
+ .probe = sata_dwc_probe,
+ .remove = sata_dwc_remove,
+};
+
+static int __init sata_dwc_init(void)
+{
+ return of_register_platform_driver(&sata_dwc_driver);
+}
+
+static void __exit sata_dwc_exit(void)
+{
+ of_unregister_platform_driver(&sata_dwc_driver);
+}
+
+module_init(sata_dwc_init);
+module_exit(sata_dwc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_VERSION(DRV_VERSION);
--
1.5.6.3
^ permalink raw reply related
* fsl_rio.c build problem
From: kerstin jonsson @ 2010-06-04 11:24 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 404 bytes --]
Hi,
I'm using:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
and building for ARCH=powerpc - mpc85xx_defconfig
arch/powerpc/sysdev/fsl_rio.c will not build due to a missing
MCSR_MASK bitmask definition.
The attached patch is based on code found in
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
and - at the least - will fix the build problem.
BR,
Kerstin
[-- Attachment #2: 0001-fix-fsl_rio.c-build-problem-in-powerpc-mpc85xx_defco.patch --]
[-- Type: text/x-patch, Size: 1537 bytes --]
>From 42d0a01865beda04b70549245ce1854c8f0074d3 Mon Sep 17 00:00:00 2001
From: Kerstin Jonsson <kerstin.jonsson@ericsson.com>
Date: Fri, 4 Jun 2010 12:56:02 +0200
Subject: [PATCH] fix fsl_rio.c build problem in powerpc mpc85xx_defconfig
---
arch/powerpc/include/asm/reg_booke.h | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2360317..68c3833 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -231,6 +231,12 @@
#define MCSR_LDG 0x00002000UL /* Guarded Load */
#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */
#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */
+
+/* e500 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
+ MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
+ MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
+ MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
#endif
#ifdef CONFIG_E200
@@ -243,6 +249,11 @@
#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
store or cache line push */
+
+/* e200 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
+ MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
+ MCSR_BUS_WRERR)
#endif
/* Bit definitions for the DBSR. */
--
1.7.1
^ permalink raw reply related
* Re: [PATCH] powerpc/oprofile: fix potential buffer overrun in op_model_cell.c
From: Robert Richter @ 2010-06-04 9:58 UTC (permalink / raw)
To: Denis Kirjanov
Cc: arnd@arndb.de, linuxppc-dev@ozlabs.org, paulus@samba.org,
jkosina@suse.cz, oprofile-list@lists.sf.net, cel@us.ibm.com
In-Reply-To: <20100601194334.GA4549@hera.kernel.org>
On 01.06.10 15:43:34, Denis Kirjanov wrote:
> Fix potential initial_lfsr buffer overrun.
> Writing past the end of the buffer could happen when index == ENTRIES
>
> Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Patch applied to
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile.git urgent
Thanks Denis.
-Robert
--
Advanced Micro Devices, Inc.
Operating System Research Center
email: robert.richter@amd.com
^ permalink raw reply
* [PATCH]Device tree update for the 460ex DWC SATA<resubmission>
From: Rupjyoti Sarmah @ 2010-06-04 10:03 UTC (permalink / raw)
To: linux-ide, linux-kernel; +Cc: linuxppc-dev, sr, rsarmah
Device tree update for the Applied micro processor 460ex on-chip SATA
Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com>
---
arch/powerpc/boot/dts/canyonlands.dts | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5..3f86564 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -163,6 +163,14 @@
interrupts = <0x1e 4>;
};
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x0 0x4 /* SATA */
+ 0x5 0x4>; /* AHBDMA */
+ };
+
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
--
1.5.6.3
^ permalink raw reply related
* Re: [Patch 0/5] PPC64-HWBKPT: Hardware Breakpoint interfaces - ver XXII
From: Paul Mackerras @ 2010-06-04 9:06 UTC (permalink / raw)
To: K.Prasad; +Cc: linuxppc-dev@ozlabs.org, Benjamin Herrenschmidt
In-Reply-To: <20100604065145.GA2408@in.ibm.com>
On Fri, Jun 04, 2010 at 12:21:45PM +0530, K.Prasad wrote:
> Meanwhile I tested the per-cpu breakpoints with the new emulate_step
> patch (refer linuxppc-dev message-id:
> 20100602112903.GB30149@brick.ozlabs.ibm.com) and they continue to fail
> due to emulate_step() failure, in my case, on a "lwz r0,0(r28)"
> instruction.
Strange, what was in r28? The emulator should handle that instruction.
> About the latest patchset, given that we chose to ignore extraneous
> interrupts for non-ptrace breakpoints, I thought that re-using
> current->thread.ptrace_bps as a flag would be efficient than introducing
> a new member in 'struct thread_struct' to do the same. I'm not sure if
> you foresee any issues with that.
I just wonder what provides exclusion between its use as a flag and
its use to hold a real ptrace breakpoint. As far as I can see nothing
does. If there is something, it's off in some other source file,
unless I'm missing something. And in that case there should be a bit
fat comment explaining why it's safe.
> If so, I'd like to send a new patch (rather than a new version of the
> complete patchset) to fix it along with the dangling put_cpu() in
> arch_unregister_hw_breakpoint() (I forgot to remove parts of the code
> between versions XIX and XX).
OK.
Paul.
^ permalink raw reply
* [PATCH]Device tree update for the 460ex DWC SATA<resubmission>
From: Rupjyoti Sarmah @ 2010-06-04 8:04 UTC (permalink / raw)
To: linux-ide, linux-kernel; +Cc: linuxppc-dev, rsarmah, sr
Device tree update for the Applied micro processor 460ex on-chip SATA
Signed-off-by: Rupjyoti Sarmah <rsarmah@appliedmicro.com>
---
arch/powerpc/boot/dts/canyonlands.dts | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5..3f86564 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -163,6 +163,14 @@
interrupts = <0x1e 4>;
};
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x0 0x4 /* SATA */
+ 0x5 0x4>; /* AHBDMA */
+ };
+
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
--
1.5.6.3
^ permalink raw reply related
* [PATCH] powerpc/44x: Fix UART2/3 interrupt assignment in PPC460EX/GT dts files
From: Stefan Roese @ 2010-06-04 8:29 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Fabien Proriol
UART2 and UART3 on 460EX/GT have incorrect interrupt mappings right now.
UART2 should be 28 (0x1c) and UART3 29 (0x1d). This patch fixes this and
switches to using decimal number instead of hex, since the AppliedMicro
(AMCC) users manuals describe their inerrupt numbers in decimal.
Thanks to Fabien Proriol for pointing this out.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Fabien Proriol <Fabien.Proriol@jdsu.com>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
arch/powerpc/boot/dts/canyonlands.dts | 4 ++--
arch/powerpc/boot/dts/glacier.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5..5806ef0 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -270,7 +270,7 @@
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <0x1d 0x4>;
+ interrupts = <28 0x4>;
};
UART3: serial@ef600600 {
@@ -281,7 +281,7 @@
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <0x1e 0x4>;
+ interrupts = <29 0x4>;
};
IIC0: i2c@ef600700 {
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index d62a4fb..e618fc4 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -259,7 +259,7 @@
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <0x1d 0x4>;
+ interrupts = <28 0x4>;
};
UART3: serial@ef600600 {
@@ -270,7 +270,7 @@
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <0x1e 0x4>;
+ interrupts = <29 0x4>;
};
IIC0: i2c@ef600700 {
--
1.7.1
^ permalink raw reply related
* Re: [Patch 0/5] PPC64-HWBKPT: Hardware Breakpoint interfaces - ver XXII
From: K.Prasad @ 2010-06-04 6:51 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev@ozlabs.org, Benjamin Herrenschmidt
In-Reply-To: <20100602113316.GA17061@brick.ozlabs.ibm.com>
On Wed, Jun 02, 2010 at 09:33:16PM +1000, Paul Mackerras wrote:
> On Fri, May 28, 2010 at 12:09:24PM +0530, K.Prasad wrote:
>
> > Please find a new set of patches that have the following changes.
>
> Thanks. There are a couple of minor things still remaining (dangling
> put_cpu in arch_unregister_hw_breakpoint, plus I don't think reusing
> current->thread.ptrace_bps the way you did in patch 5/5 is a good
> idea), but I think at this stage I'll put them in a tree together
> with my latest emulate_step version and then push them to Ben H and/or
> Ingo Molnar once I've done some testing.
>
> Paul.
Hi Paul,
Thanks for agreeing to put the patchset into a tree and push it
to the appropriate maintainers.
Meanwhile I tested the per-cpu breakpoints with the new emulate_step
patch (refer linuxppc-dev message-id:
20100602112903.GB30149@brick.ozlabs.ibm.com) and they continue to fail
due to emulate_step() failure, in my case, on a "lwz r0,0(r28)"
instruction.
About the latest patchset, given that we chose to ignore extraneous
interrupts for non-ptrace breakpoints, I thought that re-using
current->thread.ptrace_bps as a flag would be efficient than introducing
a new member in 'struct thread_struct' to do the same. I'm not sure if
you foresee any issues with that.
If so, I'd like to send a new patch (rather than a new version of the
complete patchset) to fix it along with the dangling put_cpu() in
arch_unregister_hw_breakpoint() (I forgot to remove parts of the code
between versions XIX and XX).
Thanks,
K.Prasad
^ permalink raw reply
* [PATCH] - PCI EEH pci_restore_state fix allowing for repeated adapter recovery per state save
From: Brad Peters @ 2010-06-04 0:45 UTC (permalink / raw)
To: linuxppc-dev, rlary
Patch Overview:
The pci_restore_state API is shared by both power management code and Extended
Error Handling (EEH) code on Power. This patch adds an additional recovery
function to pci_restore_state API. The problem being addressed is that Power
Management semantics only allow the saved state of PCI device to be restored
once per save. With this patch, EEH is able to restore the saved state
each time a PCI error is detected, enabling recovery in the face of repeated errors.
There was some discussion of renaming the existing and new functions to more
clearly break out unconditional restore from the default conditional one, but a
name change seemed a heavy-handed change to force on the 200+ current users.
Bit more detail:
PCI device drivers which support EEH/AER save their pci state once during
driver initialization and during EEH/AER error recovery, restore the
original saved state. What we found was that our pci driver code would
recover from the first EEH error and fail to recover on subsequent
EEH errors. This issue results from pci_restore_state() function
restoring the state during initialization on the first EEH error.
What this patch does is to provide the pci_force_restore_state() for use
by PCI drivers which support EEH/AER that require the original saved
state be restored each time an EEH/AER error is detected.
Signed-off by: Brad Peters <bpeters@us.ibm.com>
Signed-off by: Richard A Lary <rlary@linux.vnet.ibm.com>
--
Brad Peters
IBM
Linux on System-P Platform Serviceability Team Lead
bpeters@linux.vnet.ibm.com
-----------------
diff -uNrp -X linux-2.6.34/Documentation/dontdiff
linux-2.6.34.orig/drivers/pci/pci.c linux-2.6.34/drivers/pci/pci.c
--- linux-2.6.34.orig/drivers/pci/pci.c 2010-05-16 14:17:36.000000000 -0700
+++ linux-2.6.34/drivers/pci/pci.c 2010-05-26 17:16:20.000000000 -0700
@@ -920,19 +920,11 @@ pci_save_state(struct pci_dev *dev)
return 0;
}
-/**
- * pci_restore_state - Restore the saved state of a PCI device
- * @dev: - PCI device that we're dealing with
- */
-int
-pci_restore_state(struct pci_dev *dev)
+static void __pci_restore_state(struct pci_dev *dev)
{
int i;
u32 val;
- if (!dev->state_saved)
- return 0;
-
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
@@ -953,12 +945,44 @@ pci_restore_state(struct pci_dev *dev)
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
pci_restore_iov_state(dev);
+}
+
+
+/**
+ * pci_restore_state - Restore the saved state of a PCI device
+ * only if dev->state_saved is not 0. Used by
+ * power management suspend/restore routines.
+ * @dev: - PCI device that we're dealing with
+ */
+int
+pci_restore_state(struct pci_dev *dev)
+{
+
+ if (!dev->state_saved)
+ return 0;
+
+ __pci_restore_state(dev);
dev->state_saved = false;
return 0;
}
+/**
+ * pci_force_restore_state - Restore the saved state of a PCI device
+ * even if dev->state_saved is 0. Used by
+ * EEH and AER PCI error recovery.
+ * @dev: - PCI device that we're dealing with
+ */
+int
+pci_force_restore_state(struct pci_dev *dev)
+{
+ __pci_restore_state(dev);
+
+ return 0;
+}
+
+
static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
@@ -3039,6 +3063,7 @@ EXPORT_SYMBOL(pci_select_bars);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
+EXPORT_SYMBOL(pci_force_restore_state);
EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_pme_active);
EXPORT_SYMBOL(pci_wake_from_d3);
diff -uNrp -X linux-2.6.34/Documentation/dontdiff
linux-2.6.34.orig/include/linux/pci.h linux-2.6.34/include/linux/pci.h
--- linux-2.6.34.orig/include/linux/pci.h 2010-05-16 14:17:36.000000000 -0700
+++ linux-2.6.34/include/linux/pci.h 2010-05-26 17:16:21.000000000 -0700
@@ -792,6 +792,7 @@ size_t pci_get_rom_size(struct pci_dev *
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);
int pci_restore_state(struct pci_dev *dev);
+int pci_force_restore_state(struct pci_dev *dev);
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
@@ -1155,6 +1156,11 @@ static inline int pci_restore_state(stru
return 0;
}
+static inline int pci_force_restore_state(struct pci_dev *dev)
+{
+ return 0;
+}
+
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
return 0;
^ permalink raw reply
* Re: [PATCH] powerpc/5200: Update defconfigs
From: Grant Likely @ 2010-06-03 23:56 UTC (permalink / raw)
To: Stephen Neuendorffer; +Cc: linuxppc-dev
In-Reply-To: <b9420114-c787-43c2-9401-1e86dd2a5ede@VA3EHSMHS027.ehs.local>
On Thu, Jun 3, 2010 at 5:22 PM, Stephen Neuendorffer
<stephen.neuendorffer@xilinx.com> wrote:
> It seems to me like what's confused in the defconfigs is two concepts:
> 1) The requirements of a platform (what options must be set and must not
> be set)
> 2) The guarantee that a particular config was known to work at some
> point in time.
I can't speak for other maintainers; but #2 is not something I worry
about w.r.t. defconfigs. That guarantee is pretty meaningless for
anything but an exact version of the kernel tree.
> The first could allow you to drop 99% of the options (I think that this
> mainly what Linus objects to)
That, and the fact that the current files are machine-generated as
opposed to something written/edited/maintained by a human.
> The second is better handled with testing anyway (assuming that all of
> the unmentioned options are, in fact, unset)
Yup.
g.
^ permalink raw reply
* RE: [PATCH] powerpc/5200: Update defconfigs
From: Stephen Neuendorffer @ 2010-06-03 23:22 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <AANLkTilzGOkvjghvMh3E0kqIWzyZEdG2iF85Dt_d-Rbk@mail.gmail.com>
It seems to me like what's confused in the defconfigs is two concepts:
1) The requirements of a platform (what options must be set and must not
be set)
2) The guarantee that a particular config was known to work at some
point in time.
The first could allow you to drop 99% of the options (I think that this
mainly what Linus objects to)
The second is better handled with testing anyway (assuming that all of
the unmentioned options are, in fact, unset)
Steve
> -----Original Message-----
> From: linuxppc-dev-bounces+stephen=3Dneuendorffer.name@lists.ozlabs.org
[mailto:linuxppc-dev-
> bounces+stephen=3Dneuendorffer.name@lists.ozlabs.org] On Behalf Of Grant
Likely
> Sent: Thursday, June 03, 2010 4:13 PM
> To: grant.likely@secretlab.ca
> Cc: linuxppc-dev@lists.ozlabs.org
> Subject: Re: [PATCH] powerpc/5200: Update defconfigs
> =
> On Thu, Jun 3, 2010 at 3:17 PM, Grant Likely
<grant.likely@secretlab.ca> wrote:
> > Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> > CC: linuxppc-dev@lists.ozlabs.org
> > CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> =
> ... and my timing is fantastic in light of the defconfig discussion
> going on on the LKML. :-)
> =
> http://lkml.org/lkml/2010/6/2/472
> =
> g.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
This email and any attachments are intended for the sole use of the named r=
ecipient(s) and contain(s) confidential information that may be proprietary=
, privileged or copyrighted under applicable law. If you are not the intend=
ed recipient, do not read, copy, or forward this email message or any attac=
hments. Delete this email message and any attachments immediately.
^ permalink raw reply
* Re: [PATCH] powerpc/5200: Update defconfigs
From: Grant Likely @ 2010-06-03 23:12 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <20100603211755.7822.66.stgit@angua>
On Thu, Jun 3, 2010 at 3:17 PM, Grant Likely <grant.likely@secretlab.ca> wrote:
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> CC: linuxppc-dev@lists.ozlabs.org
> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
... and my timing is fantastic in light of the defconfig discussion
going on on the LKML. :-)
http://lkml.org/lkml/2010/6/2/472
g.
^ permalink raw reply
* [PATCH 1/1] [SCSI] ipr: fix resource path display and formatting
From: Wayne Boyer @ 2010-06-03 23:02 UTC (permalink / raw)
To: Anton Blanchard; +Cc: betabandido, linux-scsi, linuxppc-dev
In-Reply-To: <20100602111658.GH28295@kryten>
It was possible to overflow the buffer used to print out the formatted
version of the resource path. The fix is to limit the number of
bytes that get formatted.
This patch also updates the ipr_show_resource_path function to display the
resource address for devices that are attached to adapters that don't
support resource paths.
Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
---
James, this patch needs to go into rc-fixes. It fixes an oops that is
currently being seen on Power.
---
drivers/scsi/ipr.c | 51 +++++++++++++++++++++++++++++++++------------------
drivers/scsi/ipr.h | 5 +++--
2 files changed, 36 insertions(+), 20 deletions(-)
Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c 2010-05-26 16:01:22.000000000 -0700
+++ b/drivers/scsi/ipr.c 2010-06-03 15:31:59.000000000 -0700
@@ -1129,20 +1129,22 @@ static int ipr_is_same_device(struct ipr
}
/**
- * ipr_format_resource_path - Format the resource path for printing.
+ * ipr_format_res_path - Format the resource path for printing.
* @res_path: resource path
* @buf: buffer
*
* Return value:
* pointer to buffer
**/
-static char *ipr_format_resource_path(u8 *res_path, char *buffer)
+static char *ipr_format_res_path(u8 *res_path, char *buffer, int len)
{
int i;
+ char *p = buffer;
- sprintf(buffer, "%02X", res_path[0]);
- for (i=1; res_path[i] != 0xff; i++)
- sprintf(buffer, "%s-%02X", buffer, res_path[i]);
+ res_path[0] = '\0';
+ p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
+ for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
+ p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
return buffer;
}
@@ -1187,7 +1189,8 @@ static void ipr_update_res_entry(struct
if (res->sdev && new_path)
sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
} else {
res->flags = cfgtew->u.cfgte->flags;
if (res->flags & IPR_IS_IOA_RESOURCE)
@@ -1573,7 +1576,8 @@ static void ipr_log_sis64_config_error(s
ipr_err_separator;
ipr_err("Device %d : %s", i + 1,
- ipr_format_resource_path(&dev_entry->res_path[0], &buffer[0]));
+ ipr_format_res_path(dev_entry->res_path, buffer,
+ sizeof(buffer)));
ipr_log_ext_vpd(&dev_entry->vpd);
ipr_err("-----New Device Information-----\n");
@@ -1919,13 +1923,14 @@ static void ipr_log64_fabric_path(struct
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n",
path_active_desc[i].desc, path_state_desc[j].desc,
- ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+ ipr_format_res_path(fabric->res_path, buffer,
+ sizeof(buffer)));
return;
}
}
ipr_err("Path state=%02X Resource Path=%s\n", path_state,
- ipr_format_resource_path(&fabric->res_path[0], &buffer[0]));
+ ipr_format_res_path(fabric->res_path, buffer, sizeof(buffer)));
}
static const struct {
@@ -2066,7 +2071,8 @@ static void ipr_log64_path_elem(struct i
ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n",
path_status_desc[j].desc, path_type_desc[i].desc,
- ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+ ipr_format_res_path(cfg->res_path, buffer,
+ sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
return;
@@ -2074,7 +2080,7 @@ static void ipr_log64_path_elem(struct i
}
ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s "
"WWN=%08X%08X\n", cfg->type_status,
- ipr_format_resource_path(&cfg->res_path[0], &buffer[0]),
+ ipr_format_res_path(cfg->res_path, buffer, sizeof(buffer)),
link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
}
@@ -2139,7 +2145,7 @@ static void ipr_log_sis64_array_error(st
ipr_err("RAID %s Array Configuration: %s\n",
error->protection_level,
- ipr_format_resource_path(&error->last_res_path[0], &buffer[0]));
+ ipr_format_res_path(error->last_res_path, buffer, sizeof(buffer)));
ipr_err_separator;
@@ -2160,9 +2166,11 @@ static void ipr_log_sis64_array_error(st
ipr_err("Array Member %d:\n", i);
ipr_log_ext_vpd(&array_entry->vpd);
ipr_err("Current Location: %s",
- ipr_format_resource_path(&array_entry->res_path[0], &buffer[0]));
+ ipr_format_res_path(array_entry->res_path, buffer,
+ sizeof(buffer)));
ipr_err("Expected Location: %s",
- ipr_format_resource_path(&array_entry->expected_res_path[0], &buffer[0]));
+ ipr_format_res_path(array_entry->expected_res_path,
+ buffer, sizeof(buffer)));
ipr_err_separator;
}
@@ -4076,7 +4084,8 @@ static struct device_attribute ipr_adapt
};
/**
- * ipr_show_resource_path - Show the resource path for this device.
+ * ipr_show_resource_path - Show the resource path or the resource address for
+ * this device.
* @dev: device struct
* @buf: buffer
*
@@ -4094,9 +4103,14 @@ static ssize_t ipr_show_resource_path(st
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
- if (res)
+ if (res && ioa_cfg->sis64)
len = snprintf(buf, PAGE_SIZE, "%s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
+ else if (res)
+ len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no,
+ res->bus, res->target, res->lun);
+
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return len;
}
@@ -4348,7 +4362,8 @@ static int ipr_slave_configure(struct sc
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
if (ioa_cfg->sis64)
sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
- ipr_format_resource_path(&res->res_path[0], &buffer[0]));
+ ipr_format_res_path(res->res_path, buffer,
+ sizeof(buffer)));
return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
Index: b/drivers/scsi/ipr.h
===================================================================
--- a/drivers/scsi/ipr.h 2010-05-26 16:01:22.000000000 -0700
+++ b/drivers/scsi/ipr.h 2010-06-03 15:41:13.000000000 -0700
@@ -1684,8 +1684,9 @@ struct ipr_ucode_image_header {
if (ipr_is_device(hostrcb)) { \
if ((hostrcb)->ioa_cfg->sis64) { \
printk(KERN_ERR IPR_NAME ": %s: " fmt, \
- ipr_format_resource_path(&hostrcb->hcam.u.error64.fd_res_path[0], \
- &hostrcb->rp_buffer[0]), \
+ ipr_format_res_path(hostrcb->hcam.u.error64.fd_res_path, \
+ hostrcb->rp_buffer, \
+ sizeof(hostrcb->rp_buffer)), \
__VA_ARGS__); \
} else { \
ipr_ra_err((hostrcb)->ioa_cfg, \
^ permalink raw reply
* [PATCH] powerpc/5200: Update defconfigs
From: Grant Likely @ 2010-06-03 21:17 UTC (permalink / raw)
Cc: linuxppc-dev
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: linuxppc-dev@lists.ozlabs.org
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/configs/52xx/cm5200_defconfig | 45 +++--
arch/powerpc/configs/52xx/lite5200b_defconfig | 109 +++++++++----
arch/powerpc/configs/52xx/motionpro_defconfig | 76 ++++++---
arch/powerpc/configs/52xx/pcm030_defconfig | 108 ++++++++----
arch/powerpc/configs/52xx/tqm5200_defconfig | 75 ++++++---
arch/powerpc/configs/mpc5200_defconfig | 217 ++++++++++++++++---------
6 files changed, 421 insertions(+), 209 deletions(-)
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 218d49b..70fdf88 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:22 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 08:28:02 2010
#
# CONFIG_PPC64 is not set
@@ -72,6 +72,7 @@ CONFIG_CONSTRUCTORS=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -144,6 +145,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
@@ -308,6 +310,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -379,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -411,9 +416,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -451,6 +461,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -543,6 +554,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -603,6 +615,7 @@ CONFIG_LXT_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -640,6 +653,7 @@ CONFIG_WLAN=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -666,6 +680,7 @@ CONFIG_WLAN=y
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
#
# Serial drivers
@@ -683,6 +698,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -695,6 +712,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -725,15 +743,9 @@ CONFIG_I2C_MPC=y
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -753,7 +765,6 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
#
@@ -766,15 +777,14 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -784,7 +794,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -815,7 +825,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
@@ -918,10 +927,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1035,6 +1040,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1200,6 +1206,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 90492ff..84636bc 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:24 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 08:28:04 2010
#
# CONFIG_PPC64 is not set
@@ -73,6 +73,7 @@ CONFIG_CONSTRUCTORS=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -146,6 +147,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
@@ -321,6 +323,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
@@ -399,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -431,9 +436,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -489,6 +499,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -506,6 +517,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -592,68 +604,94 @@ CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -698,6 +736,7 @@ CONFIG_LXT_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -745,6 +784,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -754,6 +794,8 @@ CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -810,6 +852,7 @@ CONFIG_WLAN=y
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -829,6 +872,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -844,6 +889,7 @@ CONFIG_GEN_RTC=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -892,15 +938,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -920,15 +960,14 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -938,8 +977,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -991,10 +1032,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1094,6 +1131,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1203,6 +1241,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index dffc8ca..0dc23db 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:23 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 08:28:03 2010
#
# CONFIG_PPC64 is not set
@@ -72,6 +72,7 @@ CONFIG_CONSTRUCTORS=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -144,6 +145,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
@@ -309,6 +311,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -380,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -412,9 +417,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -452,6 +462,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -541,6 +552,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@@ -557,6 +569,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -597,10 +610,36 @@ CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
+
+#
+# SFF controllers with custom DMA interface
+#
CONFIG_PATA_MPC52xx=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_SATA_MV is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+
+#
+# PIO-only SFF controllers
+#
# CONFIG_PATA_PLATFORM is not set
+
+#
+# Generic fallback / legacy drivers
+#
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
@@ -628,6 +667,7 @@ CONFIG_ICPLUS_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
@@ -681,6 +721,7 @@ CONFIG_WLAN=y
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
#
# Serial drivers
@@ -698,6 +739,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -709,6 +752,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -738,15 +782,9 @@ CONFIG_I2C_MPC=y
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -807,12 +845,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -832,7 +872,6 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_SSB_POSSIBLE=y
@@ -840,15 +879,14 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -858,7 +896,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -887,11 +925,11 @@ CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -964,10 +1002,6 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1081,6 +1115,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1246,6 +1281,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 3cb2a52..0ace2d6 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:25 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 08:28:05 2010
#
# CONFIG_PPC64 is not set
@@ -73,6 +73,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="trunk"
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
@@ -144,6 +145,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
@@ -312,6 +314,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
@@ -383,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -415,9 +420,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -454,6 +464,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -532,6 +543,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
@@ -569,68 +581,94 @@ CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPC52xx=m
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -675,6 +713,7 @@ CONFIG_PHYLIB=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -724,6 +763,7 @@ CONFIG_WLAN=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -754,6 +794,7 @@ CONFIG_WLAN=y
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -773,6 +814,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -786,6 +829,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -835,15 +879,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -863,15 +901,14 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -881,8 +918,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -917,7 +956,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
@@ -1082,10 +1120,6 @@ CONFIG_RTC_DRV_PCF8563=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1197,6 +1231,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1296,6 +1331,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 96181c6..2b8bbd6 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:24 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 08:28:04 2010
#
# CONFIG_PPC64 is not set
@@ -72,6 +72,7 @@ CONFIG_CONSTRUCTORS=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -144,6 +145,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
@@ -314,6 +316,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
@@ -385,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -417,9 +422,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -458,6 +468,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -550,6 +561,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -591,11 +603,37 @@ CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
+
+#
+# SFF controllers with custom DMA interface
+#
CONFIG_PATA_MPC52xx=y
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_SATA_MV is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+
+#
+# PIO-only SFF controllers
+#
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+
+#
+# Generic fallback / legacy drivers
+#
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
@@ -623,6 +661,7 @@ CONFIG_LXT_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -660,6 +699,7 @@ CONFIG_WLAN=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -686,6 +726,7 @@ CONFIG_WLAN=y
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
#
# Serial drivers
@@ -703,6 +744,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -714,6 +757,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -745,15 +789,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@@ -814,12 +852,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -839,7 +879,6 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
#
@@ -852,15 +891,14 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -870,7 +908,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -901,7 +939,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
@@ -1062,10 +1099,6 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1179,6 +1212,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1344,6 +1378,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 7012ac0..a7d92e0 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:38:54 2010
+# Linux kernel version: 2.6.35-rc1
+# Thu Jun 3 09:09:21 2010
#
# CONFIG_PPC64 is not set
@@ -73,7 +73,9 @@ CONFIG_CONSTRUCTORS=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -97,8 +99,7 @@ CONFIG_RCU_FANOUT=32
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
@@ -155,13 +156,16 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -193,27 +197,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
@@ -280,9 +284,9 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
@@ -336,6 +340,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
@@ -414,6 +420,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -435,7 +442,26 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+CONFIG_CAN_MSCAN=m
+CONFIG_CAN_MPC5XXX=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -446,9 +472,14 @@ CONFIG_WIRELESS=y
#
# CFG80211 needs to be enabled for MAC80211
#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -458,7 +489,8 @@ CONFIG_WIRELESS=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -489,6 +521,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -508,7 +541,7 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
@@ -603,6 +636,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@@ -622,6 +656,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -707,69 +742,95 @@ CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -814,6 +875,7 @@ CONFIG_LXT_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -865,6 +927,7 @@ CONFIG_WLAN=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -923,6 +986,7 @@ CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -943,6 +1007,8 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -957,6 +1023,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -1008,15 +1075,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -1069,6 +1130,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
@@ -1080,6 +1142,10 @@ CONFIG_GPIOLIB=y
#
# AC97 GPIO expanders:
#
+
+#
+# MODULbus GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1138,12 +1204,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
@@ -1167,7 +1236,6 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
@@ -1188,17 +1256,16 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
@@ -1209,11 +1276,13 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
+# CONFIG_AB8500_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1292,14 +1361,16 @@ CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
#
# Display device support
@@ -1340,11 +1411,13 @@ CONFIG_USB_HID=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
@@ -1362,7 +1435,10 @@ CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
@@ -1376,6 +1452,7 @@ CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1390,7 +1467,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -1494,15 +1570,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -1576,10 +1643,6 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1595,6 +1658,7 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1628,9 +1692,9 @@ CONFIG_INOTIFY_USER=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@@ -1699,6 +1763,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1789,7 +1854,7 @@ CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -1806,6 +1871,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1830,6 +1896,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1839,20 +1906,10 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1861,11 +1918,13 @@ CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
^ permalink raw reply related
* Compilation error: KVM support for PowerPC book3s_64 processors
From: Linux User #330250 @ 2010-06-03 14:10 UTC (permalink / raw)
To: linuxppc-dev
Hello!
My hardware: Apple Power Mac G5 "Late 2005"
I've just compiled kernel 2.6.34 for Gentoo Linux.
# ACCEPT_KEYWORDS=3D"~ppc64" emerge -1 sys-kernel/gentoo-sources-2.6.34
I tried the "KVM support for PowerPC book3s_64 processors" just to see if w=
hat=20
I could do with KVM on my Apple Power Mac G5 with IBM PowerPC 970MP process=
or.=20
Apperently it isn't supported by this CPU. Or am I wrong?
Anyway, I get errors that indicate this option requires some VSX support,=20
which isn't supported by IBM POWER4+/PowerPC G5. I cannot post the complete=
=20
error message right now, but maybe some of you can try it.
Processor support --->
[*] AltiVec Support
[ ] VSX Support
[*] Virtualization --->
<*> KVM support for PowerPC book3s_64 processors
Some maybe relevant .config options:
CONFIG_PPC_BOOK3S_64=3Dy
CONFIG_PPC_BOOK3S=3Dy
CONFIG_POWER4_ONLY=3Dy
CONFIG_POWER4=3Dy
CONFIG_PPC_FPU=3Dy
CONFIG_ALTIVEC=3Dy
=E2=80=A6
CONFIG_PPC_PMAC=3Dy
CONFIG_PPC_PMAC64=3Dy
=E2=80=A6
CONFIG_KVM_MMIO=3Dy
CONFIG_VIRTUALIZATION=3Dy
CONFIG_KVM=3Dy
CONFIG_KVM_BOOK3S_64_HANDLER=3Dy
CONFIG_KVM_BOOK3S_64=3Dy
Maybe I've got something wrong though=E2=80=A6 Or there are other dependenc=
ies, like=20
CONFIG_VSX that are not met.
Let me know if I can help to test something.
Cheers,
Andreas.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox