* [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-4-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 25e10cf..5514e1d 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -305,15 +305,16 @@
};
crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-5-git-send-email-galak@kernel.crashing.org>
All eTSEC2 controllers support waking on magic packet so fixup device
tree to report that.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 5514e1d..14dff69 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -200,6 +200,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -226,6 +227,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -252,6 +254,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-6-git-send-email-galak@kernel.crashing.org>
* set interrupt-parent at root so its not duplicate in every node
* Add mpic timers
* Move to 4-prop cells for mpic timer
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 117 +++++++++++++++++-------------------
1 files changed, 56 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 14dff69..b08c848 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -14,6 +14,7 @@
compatible = "fsl,P1020";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
cpus {
#address-cells = <1>;
@@ -37,8 +38,7 @@
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
};
soc@ffe00000 {
@@ -58,15 +58,13 @@
ecm@1000 {
compatible = "fsl,p1020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1020-memory-controller";
reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
i2c@3000 {
@@ -75,8 +73,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -86,8 +83,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -97,8 +93,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -107,8 +102,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -116,8 +110,7 @@
#size-cells = <0>;
compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <59 0x2 0 0>;
fsl,espi-num-chipselects = <4>;
};
@@ -125,8 +118,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -135,8 +127,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -150,29 +141,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -202,20 +189,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
@@ -229,20 +215,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
@@ -256,20 +241,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
};
};
@@ -278,8 +262,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
};
/* USB2 is shared with localbus, so it must be disabled
@@ -292,8 +275,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
+ interrupts = <46 0x2 0 0>;
phy_type = "ulpi";
};
*/
@@ -301,8 +283,7 @@
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <72 0x2 0 0>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
@@ -312,8 +293,7 @@
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
@@ -323,26 +303,43 @@
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
+ timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+ };
+
msi@41600 {
compatible = "fsl,p1020-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -359,8 +356,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -368,7 +364,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -388,8 +384,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -397,7 +392,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-7-git-send-email-galak@kernel.crashing.org>
Introduce some common components that we can utilize to build up the
various PQ3/85xx device trees.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 60 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 60 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 59 +++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi | 42 ++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi | 43 ++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi | 45 +++++++++
arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi | 65 ++++++++++++
arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi | 66 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi | 51 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi | 40 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi | 53 ++++++++++
arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi | 106 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi | 68 +++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi | 39 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi | 100 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi | 109 +++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi | 109 +++++++++++++++++++++
arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi | 41 ++++++++
arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi | 41 ++++++++
48 files changed, 2575 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 0000000..b5b37ad
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <20 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <21 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <22 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <23 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 0000000..28cb8a5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 0000000..00fa1fd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 0000000..5743433
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 0000000..75854b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 0000000..a1979ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 0000000..4c4fdde
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 0000000..4b8ab43
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 0000000..40c9137
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 0000000..efe2ca0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 0000000..1382fec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 0000000..221cd2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 0000000..61456c3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 0000000..034ab8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+ queue-group@b4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 0000000..3be9ba3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+ queue-group@b5000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 0000000..02a3345
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+ queue-group@b6000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 0000000..72a3ef5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,pq3-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2 0 0>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 0000000..d1dd6fb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 0000000..a9bd803
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 0000000..8734cff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 0000000..5c80460
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 0000000..3c28dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 0000000..eefaf28
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 0000000..02a5c7a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 0000000..bba1ba4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 0000000..8f0a566
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 0000000..c227f27
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 0000000..bf957a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,65 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec4.4", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 0000000..185ab9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 0000000..fe24cd6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 0000000..1aebf3e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 0000000..ecf5e18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 0000000..66271e3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 0000000..cf1a0ac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 0000000..20835ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+ compatible = "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 0000000..6db0697
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 0000000..cf714f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 0000000..5f9bf7d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
+
+i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 0000000..7989bf5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
+
+i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 0000000..b9bada6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+};
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 0000000..ca7fec7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 0000000..b642047
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 0000000..c573702
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 0000000..0cbbac3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,100 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
new file mode 100644
index 0000000..3308986
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.1-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 0000000..7990e0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 0000000..4dd6f84
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+ compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 0000000..f053835
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+ compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-8-git-send-email-galak@kernel.crashing.org>
Split the P1020 SoC device tree into what we can include as a 'prefix'
to the board device tree and what needs to be included as a 'postfix'.
This allows use more re-use and less duplication between various board
device tree configurations (32-bit address map vs 36-bit address map).
Also enable 2nd USB2 in the SoC device tree, let the board code disable
it if needed.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 174 ++++++++++++
arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1020si.dtsi | 407 ---------------------------
3 files changed, 242 insertions(+), 407 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..fc924c5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,174 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index b08c848..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupts = <46 0x2 0 0>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- };
-
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
-
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-9-git-send-email-galak@kernel.crashing.org>
We split out the common bits of the P1020RDB device tree such that we
can reuse those bits between a 32-bit or 36-bit address map device tree.
We also update the P1020RDB device tree to utilize the new p1020 SoC dts
includes (fsl/p1020si-pre.dtsi & fsl/p1020si-post.dtsi).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 232 +--------------------------------
arch/powerpc/boot/dts/p1020rdb.dtsi | 242 +++++++++++++++++++++++++++++++++++
2 files changed, 250 insertions(+), 224 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index b31e7ec..518bf99 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,245 +9,26 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND (RO) U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND (RO) DTB Image";
- read-only;
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND (RW) JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x01100000 0x00f00000>;
- label = "NAND (RW) Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-
};
- soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "u-boot";
- read-only;
- };
-
- partition@dtb {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "dtb";
- read-only;
- };
-
- partition@kernel {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "kernel";
- read-only;
- };
-
- partition@fs {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "file system";
- read-only;
- };
-
- partition@jffs-fs {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "file system jffs2";
- };
- };
- };
-
- mdio@24000 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
@@ -280,3 +61,6 @@
};
};
};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 0000000..3738946
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,242 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ read-only;
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ read-only;
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-10-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb_36b.dts | 66 ++++++++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 0000000..bdbdb60
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-11-git-send-email-galak@kernel.crashing.org>
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Moved to 4 cell interrupt nodes to deal with FSL timer and moved
interrupt-parent to root so we don't duplicate it per IP block.
During rework fixed:
* PCI interrupt map - wrong IRQs for PCI-0 controller
* SDHC interrupt sense was wrong
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 197 ++++++++++++++
arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi | 64 +++++
arch/powerpc/boot/dts/p1010rdb.dts | 228 +----------------
arch/powerpc/boot/dts/p1010rdb.dtsi | 222 ++++++++++++++++
arch/powerpc/boot/dts/p1010si.dtsi | 374 ---------------------------
5 files changed, 493 insertions(+), 592 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/p1010rdb.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1010si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 0000000..75eb921
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,197 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1010-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1010-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1010-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ can0: can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2 0 0>;
+ };
+
+ can1: can@1d000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1d000 0x1000>;
+ interrupts = <61 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1010-l2-cache-controller",
+ "fsl,p1014-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1010-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 0000000..7354a8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1010";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ can0 = &can0;
+ can1 = &can1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1010@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c..b868d22 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts
@@ -9,230 +9,33 @@
* option) any later version.
*/
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- can0 = &can0;
- can1 = &can1;
- };
-
memory {
device_type = "memory";
};
- ifc@ffe1e000 {
+ board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 7 MB for Linux Kernel Image */
- reg = <0x00080000 0x00700000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@800000 {
- /* 20MB for JFFS2 based Root file System */
- reg = <0x00800000 0x01400000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@1f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x01f00000 0x00100000>;
- label = "NOR U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x0000020>;
- bank-width = <1>;
- device-width = <1>;
- };
+ reg = <0x0 0xffe1e000 0 0x2000>;
};
- soc@ffe00000 {
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partition@0 {
- /* 1MB for u-boot Bootloader Image */
- /* 1MB for Environment */
- reg = <0x0 0x00100000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 512KB for DTB Image */
- reg = <0x00100000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@180000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00180000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@580000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00580000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@980000 {
- /* 6.5MB for JFFS2 based RFS */
- reg = <0x00980000 0x00680000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "utmi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x0>;
- };
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x2>;
- };
- };
-
- enet0: ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy2>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
-
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -244,24 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -272,3 +61,6 @@
};
};
};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
new file mode 100644
index 0000000..149d196
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -0,0 +1,222 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 7 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00700000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@800000 {
+ /* 20MB for JFFS2 based Root file System */
+ reg = <0x00800000 0x01400000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@1f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x01f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x0000020>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+};
+
+&board_soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@580000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00580000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@980000 {
+ /* 6.5MB for JFFS2 based RFS */
+ reg = <0x00980000 0x00680000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi
deleted file mode 100644
index cabe0a4..0000000
--- a/arch/powerpc/boot/dts/p1010si.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1010";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1010@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- ifc@ffe1e000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1010-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1010-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1010-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <1>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- sata@18000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can0: can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can1: can@1d000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1d000 0x1000>;
- interrupts = <61 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1010-l2-cache-controller",
- "fsl,p1014-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- dr_mode = "host";
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x26000 0x1000 0xb1030 0x4>;
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- fsl,sdhci-auto-cmd12;
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1010-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1010-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-12-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1010rdb.dtsi | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 149d196..3aa2b82 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -125,6 +125,13 @@
};
&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
spi@7000 {
flash@0 {
#address-cells = <1>;
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-13-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 75eb921..bd9e163 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -161,6 +161,7 @@
fsl,sdhci-auto-cmd12;
};
+/include/ "pq3-sec4.4-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-14-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1010rdb_36b.dts | 89 ++++++++++++++++++++++++++++++++
1 files changed, 89 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1010rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 0000000..64776f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-15-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 235 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1022ds.dts | 431 +--------------------------
3 files changed, 318 insertions(+), 416 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..d6dd788 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,52 +8,17 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@fffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -161,51 +126,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +140,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +171,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -393,187 +195,22 @@
};
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +222,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +237,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +252,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS device tree
From: Kumar Gala @ 2011-11-10 16:13 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-16-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p2020si-post.dtsi | 194 +++++++++++++++
arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi | 69 ++++++
arch/powerpc/boot/dts/p2020ds.dts | 353 ++-------------------------
arch/powerpc/boot/dts/p2020ds.dtsi | 316 ++++++++++++++++++++++++
arch/powerpc/boot/dts/p2020si.dtsi | 99 +++-----
5 files changed, 634 insertions(+), 397 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/p2020ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 0000000..c041050
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,194 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x8000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+ };
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 0000000..3213288
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,69 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 66f03d6..237310c 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -9,30 +9,17 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020DS";
compatible = "fsl,P2020DS";
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- compatible = "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -40,203 +27,18 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
- reg = <0x3 0x0 0x30>;
- };
-
- nand@4,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
+ reg = <0 0xffe05000 0 0x1000>;
};
- soc@ffe00000 {
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
- };
-
-
- msi@41600 {
- compatible = "fsl,mpic-msi";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
- pci0: pcie@ffe08000 {
+ pci2: pcie@ffe08000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x8 0x1
- 0000 0x0 0x0 0x2 &mpic 0x9 0x1
- 0000 0x0 0x0 0x3 &mpic 0xa 0x1
- 0000 0x0 0x0 0x4 &mpic 0xb 0x1
- >;
+ reg = <0 0xffe08000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -247,61 +49,11 @@
};
};
- pci1: pcie@ffe09000 {
+ board_pci1: pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
-
- // IDSEL 0x11 func 0 - PCI slot 1
- 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 1 - PCI slot 1
- 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 2 - PCI slot 1
- 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 3 - PCI slot 1
- 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 4 - PCI slot 1
- 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 5 - PCI slot 1
- 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 6 - PCI slot 1
- 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 7 - PCI slot 1
- 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -309,89 +61,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <4 1>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
- pci2: pcie@ffe0a000 {
+ pci0: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -402,3 +79,11 @@
};
};
};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
new file mode 100644
index 0000000..c1cf6ce
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -0,0 +1,316 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
+ nand@4,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <3 1 0 0>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+&board_pci1 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ // IDSEL 0x11 func 0 - PCI slot 1
+ 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 1 - PCI slot 1
+ 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 2 - PCI slot 1
+ 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 3 - PCI slot 1
+ 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 4 - PCI slot 1
+ 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 5 - PCI slot 1
+ 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 6 - PCI slot 1
+ 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 7 - PCI slot 1
+ 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <4 1 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
index 6def17f..37f7194 100644
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ b/arch/powerpc/boot/dts/p2020si.dtsi
@@ -14,6 +14,7 @@
compatible = "fsl,P2020";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
cpus {
#address-cells = <1>;
@@ -37,8 +38,7 @@
#size-cells = <1>;
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
};
soc@ffe00000 {
@@ -58,15 +58,13 @@
ecm@1000 {
compatible = "fsl,p2020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p2020-memory-controller";
reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <18 2 0 0>;
};
i2c@3000 {
@@ -75,8 +73,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -86,8 +83,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -97,8 +93,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -107,8 +102,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -117,8 +111,7 @@
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <59 0x2 0 0>;
mode = "cpu";
};
@@ -133,29 +126,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
+ interrupts = <76 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
+ interrupts = <77 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
+ interrupts = <78 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
+ interrupts = <79 2 0 0>;
};
};
@@ -163,8 +152,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -173,8 +161,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -188,29 +175,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -219,8 +202,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
};
mdio@24520 {
@@ -254,8 +236,7 @@
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
enet1: ethernet@25000 {
@@ -268,8 +249,7 @@
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
@@ -283,16 +263,14 @@
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
sdhci@2e000 {
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <72 0x2 0 0>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
@@ -301,8 +279,7 @@
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xbfe>;
@@ -323,15 +300,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -350,8 +326,7 @@
reg = <0 0xffe08000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
+ interrupts = <24 2 0 0>;
};
pci1: pcie@ffe09000 {
@@ -363,8 +338,7 @@
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ interrupts = <25 2 0 0>;
};
pci2: pcie@ffe0a000 {
@@ -376,7 +350,6 @@
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <26 2 0 0>;
};
};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-17-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p2020rdb.dts | 63 ++---
arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 141 +----------
arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 107 +--------
arch/powerpc/boot/dts/p2020si.dtsi | 355 -------------------------
4 files changed, 22 insertions(+), 644 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/p2020si.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f..fd42712 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
device_type = "memory";
};
- localbus@ffe05000 {
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
};
- soc@ffe00000 {
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
};
};
- spi@7000 {
-
- fsl_m25p80@0 {
+ spi@7000 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
spi-max-frequency = <50000000>;
- mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
@@ -202,13 +201,11 @@
mdio@24520 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
};
};
@@ -224,11 +221,7 @@
status = "disabled";
};
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
+ ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +245,18 @@
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
-
};
pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
+ pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -286,21 +268,10 @@
};
pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -311,3 +282,5 @@
};
};
};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8dddd..66aac86 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- pci0 = &pci0;
- };
-
cpus {
PowerPC,P2020@1 {
- status = "disabled";
+ status = "disabled";
};
-
- };
-
- memory {
- device_type = "memory";
};
localbus@ffe05000 {
@@ -43,115 +31,18 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
dma@c300 {
status = "disabled";
};
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25520 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- status = "disabled";
- };
-
enet0: ethernet@24000 {
status = "disabled";
};
- enet1: ethernet@25000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@26000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
-
mpic: pic@40000 {
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
msi@41600 {
status = "disabled";
};
-
-
};
pci0: pcie@ffe08000 {
status = "disabled";
};
- pci1: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
pci2: pcie@ffe0a000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34b..9bd8ef4 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial1;
- pci1 = &pci1;
- };
-
cpus {
PowerPC,P2020@0 {
- status = "disabled";
+ status = "disabled";
};
};
- memory {
- device_type = "memory";
- };
-
localbus@ffe05000 {
status = "disabled";
};
@@ -70,55 +60,10 @@
status = "disabled";
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
gpio: gpio-controller@f000 {
status = "disabled";
};
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- };
-
dma@21300 {
status = "disabled";
};
@@ -139,12 +84,6 @@
status = "disabled";
};
- enet0: ethernet@24000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@25000 {
status = "disabled";
};
@@ -170,22 +109,6 @@
>;
};
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
global-utilities@e0000 { //global utilities block
status = "disabled";
};
@@ -199,30 +122,4 @@
pci1: pcie@ffe09000 {
status = "disabled";
};
-
- pci2: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 37f7194..0000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P2020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <18 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- mode = "cpu";
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-
- };
-
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <24 2 0 0>;
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <25 2 0 0>;
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <26 2 0 0>;
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-18-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 225 ++++++++++++++
arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1021mds.dts | 421 ++-------------------------
3 files changed, 314 insertions(+), 400 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 0000000..38ba54d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ };
+
+ ucc@2400 {
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 0000000..4abd54b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1021";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b852..b1bef1f 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1021@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1021@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
};
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
};
};
- soc@ffe00000 {
-
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
+ soc: soc@ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1021-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1021-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -253,237 +149,45 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1021-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
+ mdio@24000 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
reg = <0x4>;
};
};
mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
- enet2: ethernet@B2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1021-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1",
- "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1021-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1021-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
par_io@e0100 {
@@ -499,8 +203,7 @@
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
- 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
-*/
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +238,10 @@
};
pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -571,31 +253,10 @@
};
pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -606,36 +267,16 @@
};
};
- qe@ffe80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
+ qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <63 2 60 2>; //high:47 low:44
- interrupt-parent = <&mpic>;
- };
-
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
@@ -645,20 +286,15 @@
};
mdio@2120 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2120 0x18>;
- compatible = "fsl,ucc-mdio";
-
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <5 1>;
+ interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
@@ -671,10 +307,6 @@
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <5>;
- reg = <0x2400 0x200>;
- interrupts = <40>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
@@ -682,18 +314,7 @@
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x6000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x6000>;
- };
- };
};
};
+
+/include/ "fsl/p1021si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-19-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi | 196 ++++++
arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi | 70 +++
arch/powerpc/boot/dts/mpc8572ds.dts | 757 +-----------------------
arch/powerpc/boot/dts/mpc8572ds.dtsi | 397 +++++++++++++
arch/powerpc/boot/dts/mpc8572ds_36b.dts | 746 +-----------------------
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts | 487 +--------------
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts | 245 +++------
7 files changed, 788 insertions(+), 2110 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8572ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 0000000..d44e25a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 0000000..ca18832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d2..0c9f295 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -680,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -784,31 +66,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -819,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 0000000..c3d4fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db..6c3d0b3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -667,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -771,31 +66,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -806,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2a..d34d127 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ pic@40000 {
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
+ >;
};
msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- protected-sources = <
- 31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe4 0xe5 0xe6 0xe7 /* msi */
- >;
};
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ timer@42100 {
+ status = "disabled";
};
-
};
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- };
+ pcie@ffe0a000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f..d6a8faf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
+ };
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
};
-
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
@@ -189,41 +94,25 @@
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-20-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi | 248 ++++++++++++++
arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi | 63 ++++
arch/powerpc/boot/dts/mpc8536ds.dts | 456 +------------------------
arch/powerpc/boot/dts/mpc8536ds.dtsi | 141 ++++++++
arch/powerpc/boot/dts/mpc8536ds_36b.dts | 410 ++---------------------
5 files changed, 489 insertions(+), 829 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8536ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 0000000..8365be6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8536-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8536-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ /* mark compat w/8572 to get some erratum treatment */
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8536-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ usb@22000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ usb@23000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+ };
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+ usb@2b000 {
+ compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+ reg = <0x2b000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <60 0x2 0 0>;
+ };
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8536-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 0000000..7de45a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8536";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8536@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10e..c158815 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,403 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>;
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- compatible = "spansion,s25sl12801";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
- flash@2 {
- compatible = "spansion,s25sl12801";
- reg = <2>;
- spi-max-frequency = <40000000>;
- };
- flash@3 {
- compatible = "spansion,s25sl12801";
- reg = <3>;
- spi-max-frequency = <40000000>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0 0xffe00000 0x100000>;
};
pci0: pci@ffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x98000000
0x02000000 0 0x98000000
0 0x08000000
@@ -453,31 +71,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x90000000
0x02000000 0 0x90000000
0 0x08000000
@@ -489,32 +86,10 @@
};
pci3: pcie@ffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x20000000
@@ -525,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 0000000..1462e4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ i2c@3100 {
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1 0 0>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ compatible = "spansion,s25sl12801";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@2 {
+ compatible = "spansion,s25sl12801";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@3 {
+ compatible = "spansion,s25sl12801";
+ reg = <3>;
+ spi-max-frequency = <40000000>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 0x1 0 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 0x1 0 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ usb@2b000 {
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b260..8f4b929 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,351 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
};
- pci0: pci@fffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ pci0: pci@ffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
- 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
- pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ pci1: pcie@ffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -401,31 +71,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -437,32 +86,10 @@
};
pci3: pcie@fffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
@@ -473,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-21-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi | 191 ++++++++++
arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi | 63 ++++
arch/powerpc/boot/dts/mpc8544ds.dts | 473 ++-----------------------
arch/powerpc/boot/dts/mpc8544ds.dtsi | 161 +++++++++
4 files changed, 453 insertions(+), 435 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8544ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 0000000..f73ba4e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8544-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 0000000..8777f92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8544";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index d793968..e934987 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -9,339 +9,52 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8544@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
- soc8544@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8544-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8544-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8544-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc8544@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
};
pci0: pci@e0008000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 J16 Slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
};
pci1: pcie@e0009000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0x0 0xe0009000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -353,31 +66,10 @@
};
pci2: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -388,44 +80,11 @@
};
};
- pci3: pcie@e000b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000b000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
- 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
- interrupt-map = <
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ board_pci3: pci3: pcie@e000b000 {
+ reg = <0x0 0xe000b000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
@@ -433,70 +92,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
-
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xb0000000
- 0x2000000 0x0 0xb0000000
- 0x0 0x100000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0
- 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
};
};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
new file mode 100644
index 0000000..270f64b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ enet0: ethernet@24000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci3 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-22-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi | 143 +++++++
arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi | 62 +++
arch/powerpc/boot/dts/mpc8548cds.dts | 505 ++++++-------------------
3 files changed, 327 insertions(+), 383 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 0000000..9d8023a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <25 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 0000000..289f121
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a557..07b8dae 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -29,76 +27,19 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8548@e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
@@ -116,351 +57,178 @@
};
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
};
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pci@e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <0 1>;
+ interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
@@ -505,56 +273,25 @@
};
pci1: pci@e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -565,3 +302,5 @@
};
};
};
+
+/include/ "fsl/mpc8548si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS device trees
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-23-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 342 ++++++++++++
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 145 +++++
arch/powerpc/boot/dts/p4080ds.dts | 14 +-
arch/powerpc/boot/dts/p4080si.dtsi | 755 ---------------------------
4 files changed, 498 insertions(+), 758 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p4080si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 0000000..1510991
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,342 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ interrupts = <
+ 16 2 1 11 /* err_irq */
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0 /* bell_inb_irq */
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0 /* msg1_rx_irq */
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>; /* msg2_rx_irq */
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p4080-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 0000000..b353ac9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,145 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc..8ea1ae9 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -105,12 +108,12 @@
};
};
- rapidio0: rapidio@ffe0c0000 {
+ rio: rapidio0: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x20000>;
ranges = <0 0 0xc 0x20000000 0 0x01000000>;
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +135,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -147,6 +151,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -162,6 +167,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -174,3 +180,5 @@
};
};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01a..0000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P4080";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p4080-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p4080-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- voltage-ranges = <3300 3300>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p4080-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p4080-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio0: rapidio@ffe0c0000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-24-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 335 +++++++++++++
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 96 ++++
arch/powerpc/boot/dts/p5020ds.dts | 13 +-
arch/powerpc/boot/dts/p5020si.dtsi | 716 ---------------------------
4 files changed, 441 insertions(+), 719 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p5020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 0000000..7135c67
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,335 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p5020-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 0000000..ae823a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P5020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d4099..ceee4f5 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -176,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -191,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -206,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -217,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad..0000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P5020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e5500@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e5500@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p5020-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p5020-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p5020-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p5020-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-25-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 332 ++++++++++++
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 112 ++++
arch/powerpc/boot/dts/p3041ds.dts | 12 +-
arch/powerpc/boot/dts/p3041si.dtsi | 729 ---------------------------
4 files changed, 454 insertions(+), 731 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3041si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 0000000..9cda481
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,332 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 0000000..136def3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b..1053d69 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -175,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -190,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -205,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -216,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b7..0000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p3041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-26-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 332 +++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 112 +++++++++
arch/powerpc/boot/dts/p2041rdb.dts | 28 ++-
3 files changed, 470 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..c653465
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,332 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..56fa0a1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..c4efefd 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +124,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +140,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +156,24 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci3: pcie@ffe203000 {
+ status = "disabled";
+ reg = <0xf 0xfe203000 0 0x1000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +185,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-27-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi | 296 +++++++++++
arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi | 125 +++++
arch/powerpc/boot/dts/p3060qds.dts | 12 +-
arch/powerpc/boot/dts/p3060si.dtsi | 719 ---------------------------
4 files changed, 430 insertions(+), 722 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3060si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644
index 0000000..a63edd1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644
index 0000000..00c8e70
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
index 08b9193..529042e 100644
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
/ {
model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -138,7 +140,7 @@
};
};
- rapidio@ffe0c0000 {
+ rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
@@ -149,7 +151,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -210,6 +212,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -225,6 +228,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -236,3 +240,5 @@
};
};
};
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644
index 68947e1..0000000
--- a/arch/powerpc/boot/dts/p3060si.dtsi
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- rmu: rmu@d3000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,srio-rmu";
- reg = <0xd3000 0x500>;
- ranges = <0x0 0xd3000 0x500>;
-
- message-unit@0 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x0 0x100>;
- interrupts = <
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0>;/* msg1_rx_irq */
- };
- message-unit@100 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x100 0x100>;
- interrupts = <
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>;/* msg2_rx_irq */
- };
- doorbell-unit@400 {
- compatible = "fsl,srio-dbell-unit";
- reg = <0x400 0x80>;
- interrupts = <
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0>;/* bell_inb_irq */
- };
- port-write-unit@4e0 {
- compatible = "fsl,srio-port-write-unit";
- reg = <0x4e0 0x20>;
- interrupts = <16 2 1 11>;
- };
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3060-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3060-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio@ffe0c0000 {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS device tree
From: Kumar Gala @ 2011-11-10 16:14 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1320941653-29797-28-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 248 ++++++++++++++++++
arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi | 76 ++++++
arch/powerpc/boot/dts/p1023rds.dts | 372 +--------------------------
3 files changed, 330 insertions(+), 366 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 0000000..b29330c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 8 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1023-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1023-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1023-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1023-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ ranges = <0 0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1023-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 0000000..ac45f6d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,76 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1023";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1023@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1023@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d9b7767..b85b7c3 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -34,137 +34,30 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/dts-v1/;
+/include/ "fsl/p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,P1023@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- cpu1: PowerPC,P1023@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
+ interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
- soc@ff600000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1023-immr", "simple-bus";
+ soc: soc@ff600000 {
ranges = <0x0 0x0 0xff600000 0x200000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1023-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1023-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -186,197 +79,14 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,qoriq-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1023-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
dr_mode = "host";
phy_type = "ulpi";
};
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000 0x10000>;
- ranges = <0 0x30000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <58 2>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <57 2>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <57 2>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
- "fsl,p1022-pmc";
- reg = <0xe0070 0x20>;
- etsec1_clk: soc-clk@B0{
- fsl,pmcdr-mask = <0x00000080>;
- };
- etsec2_clk: soc-clk@B1{
- fsl,pmcdr-mask = <0x00000040>;
- };
- etsec3_clk: soc-clk@B2{
- fsl,pmcdr-mask = <0x00000020>;
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1023-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1023-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
- localbus@ff605000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@ff605000 {
reg = <0 0xff605000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
@@ -428,34 +138,10 @@
};
pci0: pcie@ff60a000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <1>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -467,34 +153,10 @@
};
pci1: pcie@ff609000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <2>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff609000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -506,34 +168,10 @@
};
pci2: pcie@ff60b000 {
- cell-index = <3>;
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -544,3 +182,5 @@
};
};
};
+
+/include/ "fsl/p1023si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox