* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
From: Kumar Gala @ 2011-11-17 16:55 UTC (permalink / raw)
To: Tabi Timur-B04825; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <CAOZdJXW9Ygz9nMmXgV_GaTPEQHi0zHB7d7uBAPV4fN7-p+ST-Q@mail.gmail.com>
On Nov 17, 2011, at 10:04 AM, Tabi Timur-B04825 wrote:
> On Thu, Nov 17, 2011 at 8:32 AM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>> Utilize new split between board & SoC, and new SoC device trees split
>> into pre & post utilizing 'template' includes for SoC IP blocks.
>>=20
>> Other changes include:
>>=20
>> * Reworked PCIe nodes to allow supportin IRQs for controller (errors)
>> and moved PCI device IRQs down to virtual bridge level
>> * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' =
as the
>> 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an =
erratum
>> * Updated spi node to new espi binding specification
>> * Renamed SDHC node from 'sdhci' to 'sdhc'
>> * Added usb node for 2nd usb controller
>> * Dropping "fsl,p1022-IP..." from compatibles for standard blocks
>> * Fixed bug in local bus range node for CS2, was maping to
>> 0x0 0x0xffa00000 instead of 0xf 0xffa00000
>> * Fixed localbus reg property should have been 0xf 0xffe05000
>>=20
>> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
>> ---
>> v2: fixed localbus reg property
>=20
> Acked-by: Timur Tabi <timur@freescale.com>
How about a Tested-by:
:)
- k
^ permalink raw reply
* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
From: Tabi Timur-B04825 @ 2011-11-17 16:04 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1321540377-3672-1-git-send-email-galak@kernel.crashing.org>
On Thu, Nov 17, 2011 at 8:32 AM, Kumar Gala <galak@kernel.crashing.org> wro=
te:
> Utilize new split between board & SoC, and new SoC device trees split
> into pre & post utilizing 'template' includes for SoC IP blocks.
>
> Other changes include:
>
> * Reworked PCIe nodes to allow supportin IRQs for controller (errors)
> =A0and moved PCI device IRQs down to virtual bridge level
> * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as t=
he
> =A0'mpc8572' compatiable is to deal with a 'mpc8572' specific to an errat=
um
> * Updated spi node to new espi binding specification
> * Renamed SDHC node from 'sdhci' to 'sdhc'
> * Added usb node for 2nd usb controller
> * Dropping "fsl,p1022-IP..." from compatibles for standard blocks
> * Fixed bug in local bus range node for CS2, was maping to
> =A00x0 0x0xffa00000 instead of 0xf 0xffa00000
> * Fixed localbus reg property should have been 0xf 0xffe05000
>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> v2: fixed localbus reg property
Acked-by: Timur Tabi <timur@freescale.com>
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply
* [PATCH 4/4] powerpc/83xx: make mpc830x_rdb use mpc83xx_setup_pci
From: Dmitry Eremin-Solenikov @ 2011-11-17 14:48 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321541330-2330-1-git-send-email-dbaryshkov@gmail.com>
Traditionally mpc830x_rdb board file searched for mpc8308-pcie devices.
However both in-kernel dts from the beginning declared those pcie units
as compatible with mpc8314-pci, which is handled by mpc83xx_setup_pci().
Drop special handling for mpc8308 and use common function instead.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
arch/powerpc/platforms/83xx/mpc830x_rdb.c | 12 +-----------
1 files changed, 1 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index 6e4783d..67a3030 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -13,11 +13,8 @@
* option) any later version.
*/
-#include <linux/pci.h>
-
#include <asm/ipic.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
@@ -26,17 +23,10 @@
*/
static void __init mpc830x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
--
1.7.7.1
^ permalink raw reply related
* [PATCH 3/4] poewrpc/83xx: headers cleanup
From: Dmitry Eremin-Solenikov @ 2011-11-17 14:48 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321541330-2330-1-git-send-email-dbaryshkov@gmail.com>
Drop lots of unused headers after board files merge/splitup
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
arch/powerpc/platforms/83xx/asp834x.c | 2 -
arch/powerpc/platforms/83xx/km83xx.c | 26 ------------------
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c | 5 ---
arch/powerpc/platforms/83xx/misc.c | 1 -
arch/powerpc/platforms/83xx/mpc830x_rdb.c | 5 +--
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 5 ---
arch/powerpc/platforms/83xx/mpc832x_mds.c | 33 ------------------------
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 13 ---------
arch/powerpc/platforms/83xx/mpc834x_itx.c | 21 ---------------
arch/powerpc/platforms/83xx/mpc834x_mds.c | 23 ----------------
arch/powerpc/platforms/83xx/mpc836x_mds.c | 32 -----------------------
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 9 ------
arch/powerpc/platforms/83xx/mpc837x_mds.c | 7 -----
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 5 ---
arch/powerpc/platforms/83xx/sbc834x.c | 23 ----------------
arch/powerpc/platforms/83xx/suspend.c | 8 ------
arch/powerpc/platforms/83xx/usb.c | 8 ------
17 files changed, 2 insertions(+), 224 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index 464ea8e..a7c0188 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -14,10 +14,8 @@
* option) any later version.
*/
-#include <linux/pci.h>
#include <linux/of_platform.h>
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index 65eb792..3b29e35 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -11,35 +11,9 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include <asm/qe.h>
-#include <asm/qe_ic.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index ef6537b..d78221a 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -11,19 +11,14 @@
* (at your option) any later version.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/reboot.h>
-#include <asm/prom.h>
#include <asm/machdep.h>
/*
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index 125336f..76377fe 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -9,7 +9,6 @@
* option) any later version.
*/
-#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index ef595f1..6e4783d 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -14,12 +14,11 @@
*/
#include <linux/pci.h>
-#include <linux/of_platform.h>
-#include <asm/time.h>
+
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <sysdev/fsl_pci.h>
-#include <sysdev/fsl_soc.h>
+
#include "mpc83xx.h"
/*
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index fa25977..9a0486f 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -13,13 +13,8 @@
* option) any later version.
*/
-#include <linux/pci.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index e36bc61..e0c25ec 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -10,45 +10,12 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include <asm/qe.h>
-#include <asm/qe_ic.h>
#include "mpc83xx.h"
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
/* ************************************************************************
*
* Setup the architecture
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index eff5baa..eabfbb9 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -14,31 +14,18 @@
* option) any later version.
*/
-#include <linux/pci.h>
-#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/spi/mmc_spi.h>
#include <linux/mmc/host.h>
-#include <linux/of_platform.h>
#include <linux/fsl_devices.h>
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <asm/qe.h>
-#include <asm/qe_ic.h>
#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
#ifdef CONFIG_QUICC_ENGINE
static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
struct spi_board_info *board_infos,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 39849dd..e6fe14f 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -11,31 +11,10 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <linux/of_platform.h>
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 5828d8e..7a850a6 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -11,31 +11,8 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/of_platform.h>
-
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index ad8e4bc..355aa2d 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -16,47 +16,15 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include "mpc83xx.h"
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
/* ************************************************************************
*
* Setup the architecture
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index f8769d7..2c234bd 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -12,18 +12,9 @@
* option) any later version.
*/
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <asm/prom.h>
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <asm/qe.h>
-#include <asm/qe_ic.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index e53a60b..947ae94 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -11,15 +11,8 @@
* option) any later version.
*/
-#include <linux/pci.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 16c9c9c..c6bc87f 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -11,14 +11,9 @@
* option) any later version.
*/
-#include <linux/pci.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index 1c3dfc8..9dff3ff 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -13,31 +13,8 @@
* option) any later version.
*/
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/of_platform.h>
-
-#include <asm/system.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 104faa8..d0c814a 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -10,21 +10,13 @@
* by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/suspend.h>
-#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/time.h>
#include <asm/mpc6xx.h>
#include <sysdev/fsl_soc.h>
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 1ad748b..9eb85b8 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -10,14 +10,6 @@
* option) any later version.
*/
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/of.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
#include "mpc83xx.h"
--
1.7.7.1
^ permalink raw reply related
* [PATCH 2/4] powerpc/83xx: merge PCI bridge additions
From: Dmitry Eremin-Solenikov @ 2011-11-17 14:48 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321541330-2330-1-git-send-email-dbaryshkov@gmail.com>
Nearly all mpc83xx-based boards have a common piece of code - one that
loops over all pci/pcie bridges and registers them. Merge that code into
a special function common to all boards.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
arch/powerpc/platforms/83xx/km83xx.c | 7 +++----
arch/powerpc/platforms/83xx/misc.c | 14 ++++++++++++++
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 11 +----------
arch/powerpc/platforms/83xx/mpc832x_mds.c | 5 +----
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 7 ++-----
arch/powerpc/platforms/83xx/mpc834x_itx.c | 9 +--------
arch/powerpc/platforms/83xx/mpc834x_mds.c | 9 +--------
arch/powerpc/platforms/83xx/mpc836x_mds.c | 5 +----
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 9 +--------
arch/powerpc/platforms/83xx/mpc837x_mds.c | 11 +----------
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 11 +----------
arch/powerpc/platforms/83xx/mpc83xx.h | 6 ++++++
arch/powerpc/platforms/83xx/sbc834x.c | 10 +---------
13 files changed, 34 insertions(+), 80 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index 7ef6354..65eb792 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -51,15 +51,14 @@
*/
static void __init mpc83xx_km_setup_arch(void)
{
+#ifdef CONFIG_QUICC_ENGINE
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("kmpbec83xx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index ee4de77..125336f 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -12,12 +12,14 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hw_irq.h>
#include <asm/ipic.h>
#include <asm/qe_ic.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
@@ -128,3 +130,15 @@ int __init mpc83xx_declare_of_platform_devices(void)
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index ce87406..fa25977 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -28,19 +28,10 @@
*/
static void __init mpc831x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index df80ecc..e36bc61 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -72,10 +72,7 @@ static void __init mpc832x_sys_setup_arch(void)
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e4c7c64..eff5baa 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -193,17 +193,14 @@ machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
*/
static void __init mpc832x_rdb_setup_arch(void)
{
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#if defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 87868c1..39849dd 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -58,17 +58,10 @@ machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
*/
static void __init mpc834x_itx_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834x_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 4be9555..5828d8e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -77,17 +77,10 @@ static int mpc834xemds_usb_cfg(void)
*/
static void __init mpc834x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834xemds_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 3b20275..ad8e4bc 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -80,10 +80,7 @@ static void __init mpc836x_mds_setup_arch(void)
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index fd6f730..f8769d7 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -31,17 +31,10 @@ machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
static void __init mpc836x_rdk_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
#endif
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 7463183..e53a60b 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -79,19 +79,10 @@ out:
*/
static void __init mpc837x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837xmds_usb_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index a4a5336..16c9c9c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -50,19 +50,10 @@ static void mpc837x_rdb_sd_cfg(void)
*/
static void __init mpc837x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837x_usb_cfg();
mpc837x_rdb_sd_cfg();
}
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index a54f6ba..0cf74d7 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -79,6 +79,12 @@ static inline void __init mpc83xx_qe_init_IRQ(void) {}
#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
#endif /* CONFIG_QUICC_ENGINE */
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci() do {} while (0)
+#endif
+
extern int mpc83xx_declare_of_platform_devices(void);
#endif /* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index 22faaa1..1c3dfc8 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -48,18 +48,10 @@
*/
static void __init sbc834x_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("sbc834x_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
-
+ mpc83xx_setup_pci();
}
machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
--
1.7.7.1
^ permalink raw reply related
* [PATCH 1/4] powerpc/83xx: consolidate of_platform_bus_probe calls
From: Dmitry Eremin-Solenikov @ 2011-11-17 14:48 UTC (permalink / raw)
To: linuxppc-dev
83xx board files have a lot of duplication in
*_declare_of_platform_devices() functions. Merge that into a single
function common to most of the boards.
The only leftover is mpc834x_itx.c board file which explicitly asks for
fsl,pq2pro-localbus, as corresponding bindings don't provide
"simple-bus" compatibility in localbus node.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
arch/powerpc/platforms/83xx/asp834x.c | 15 +--------------
arch/powerpc/platforms/83xx/km83xx.c | 18 +-----------------
arch/powerpc/platforms/83xx/misc.c | 17 +++++++++++++++++
arch/powerpc/platforms/83xx/mpc830x_rdb.c | 13 +------------
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 14 +-------------
arch/powerpc/platforms/83xx/mpc832x_mds.c | 18 +-----------------
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 18 +-----------------
arch/powerpc/platforms/83xx/mpc834x_itx.c | 3 +--
arch/powerpc/platforms/83xx/mpc834x_mds.c | 15 +--------------
arch/powerpc/platforms/83xx/mpc836x_mds.c | 18 +-----------------
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 11 +----------
arch/powerpc/platforms/83xx/mpc837x_mds.c | 17 +----------------
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 18 +-----------------
arch/powerpc/platforms/83xx/mpc83xx.h | 1 +
arch/powerpc/platforms/83xx/sbc834x.c | 15 +--------------
15 files changed, 31 insertions(+), 180 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index 90b6c06..464ea8e 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -36,20 +36,7 @@ static void __init asp834x_setup_arch(void)
mpc834x_usb_cfg();
}
-static struct __initdata of_device_id asp8347_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init asp8347_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, asp8347_ids, NULL);
- return 0;
-}
-machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index eae5913..7ef6354 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -122,23 +122,7 @@ static void __init mpc83xx_km_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id kmpbec83xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init kmeter_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
/* list of the supported boards */
static char *board[] __initdata = {
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index 4ac60cc..ee4de77 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -111,3 +111,20 @@ void __init mpc83xx_ipic_and_qe_init_IRQ(void)
mpc83xx_qe_init_IRQ();
}
#endif /* CONFIG_QUICC_ENGINE */
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus" },
+ { .compatible = "gianfar" },
+ { .compatible = "gpio-leds", },
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ {},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index b453c15..ef595f1 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -56,18 +56,7 @@ static int __init mpc830x_rdb_probe(void)
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc830x_rdb) {
.name = "MPC830x RDB",
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 386bde8..ce87406 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -58,19 +58,7 @@ static int __init mpc831x_rdb_probe(void)
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc831x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc831x_rdb) {
.name = "MPC831x RDB",
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 39e0a92..df80ecc 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -101,23 +101,7 @@ static void __init mpc832x_sys_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index ebfecec..e4c7c64 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -218,23 +218,7 @@ static void __init mpc832x_rdb_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 509e070..87868c1 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,13 +41,12 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
{},
};
static int __init mpc834x_itx_declare_of_platform_devices(void)
{
+ mpc83xx_declare_of_platform_devices();
return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
}
machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 3807735..4be9555 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -92,20 +92,7 @@ static void __init mpc834x_mds_setup_arch(void)
mpc834xemds_usb_cfg();
}
-static struct of_device_id mpc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, mpc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index afb3e45..3b20275 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -144,23 +144,7 @@ static void __init mpc836x_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc836x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc836x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc836x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
#ifdef CONFIG_QE_USB
static int __init mpc836x_usb_cfg(void)
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index cd8f078..fd6f730 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -27,16 +27,7 @@
#include "mpc83xx.h"
-static struct of_device_id __initdata mpc836x_rdk_ids[] = {
- { .compatible = "simple-bus", },
- {},
-};
-
-static int __init mpc836x_rdk_declare_of_platform_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
-}
-machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
static void __init mpc836x_rdk_setup_arch(void)
{
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 3be7f3a..7463183 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -95,22 +95,7 @@ static void __init mpc837x_mds_setup_arch(void)
mpc837xmds_usb_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index eebfd81..a4a5336 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -67,23 +67,7 @@ static void __init mpc837x_rdb_setup_arch(void)
mpc837x_rdb_sd_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
static const char *board[] __initdata = {
"fsl,mpc8377rdb",
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index f07751a..a54f6ba 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -79,5 +79,6 @@ static inline void __init mpc83xx_qe_init_IRQ(void) {}
#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
#endif /* CONFIG_QUICC_ENGINE */
+extern int mpc83xx_declare_of_platform_devices(void);
#endif /* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cdce953..22faaa1 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -62,20 +62,7 @@ static void __init sbc834x_setup_arch(void)
}
-static struct __initdata of_device_id sbc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init sbc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, sbc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
--
1.7.7.1
^ permalink raw reply related
* Re: [PATCH 21/29] powerpc/85xx: Rework P1022DS device tree
From: Kumar Gala @ 2011-11-17 14:33 UTC (permalink / raw)
To: Tabi Timur-B04825; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <CAOZdJXU1wdm9dgCDTOTzYUqKvQbB9anhSAJgGMXtypz4gqnuSQ@mail.gmail.com>
On Nov 17, 2011, at 8:01 AM, Tabi Timur-B04825 wrote:
> On Thu, Nov 17, 2011 at 1:16 AM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>=20
>> - localbus@fffe05000 {
>> - #address-cells =3D <2>;
>> - #size-cells =3D <1>;
>> - compatible =3D "fsl,p1022-elbc", "fsl,elbc", =
"simple-bus";
>> + lbc: localbus@fffe05000 {
>> reg =3D <0 0xffe05000 0 0x1000>;
>> - interrupts =3D <19 2 0 0>;
>=20
> The 'reg' property is still wrong. It should be <0xf 0xffe05000 0 =
0x1000>;
thanks, fixed.
- k=
^ permalink raw reply
* [PATCH][v2] powerpc/85xx: Rework P2041RDB device tree
From: Kumar Gala @ 2011-11-17 14:32 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321540377-3672-1-git-send-email-galak@kernel.crashing.org>
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p2041-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
v2: deleted p2041si.dtsi
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 305 ++++++++++++
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 111 +++++
arch/powerpc/boot/dts/p2041rdb.dts | 11 +-
arch/powerpc/boot/dts/p2041si.dtsi | 692 ---------------------------
4 files changed, 425 insertions(+), 694 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p2041si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..8d037cf
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,305 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..2d0a40d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,111 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..d6ea24d 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +124,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +140,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +156,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +168,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
deleted file mode 100644
index f7492ed..0000000
--- a/arch/powerpc/boot/dts/p2041si.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * P2041 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P2041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p2041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p2041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p2041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p2041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
-
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
From: Kumar Gala @ 2011-11-17 14:32 UTC (permalink / raw)
To: linuxppc-dev
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
and moved PCI device IRQs down to virtual bridge level
* Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the
'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum
* Updated spi node to new espi binding specification
* Renamed SDHC node from 'sdhci' to 'sdhc'
* Added usb node for 2nd usb controller
* Dropping "fsl,p1022-IP..." from compatibles for standard blocks
* Fixed bug in local bus range node for CS2, was maping to
0x0 0x0xffa00000 instead of 0xf 0xffa00000
* Fixed localbus reg property should have been 0xf 0xffe05000
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
v2: fixed localbus reg property
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 235 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1022ds.dts | 435 +-------------------------
3 files changed, 320 insertions(+), 418 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..24a73e9 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,55 +8,20 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffa00000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
@@ -161,51 +126,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +140,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +171,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -393,187 +195,22 @@
};
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +222,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +237,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +252,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related
* [PATCH] powerpc/85xx: Update SRIO device tree nodes
From: Kumar Gala @ 2011-11-17 14:18 UTC (permalink / raw)
To: linuxppc-dev
Update all dts files that support SRIO controllers to match the new
fsl,srio device tree binding.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | 25 +++++----
arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi | 28 +++++++---
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 20 +++++++
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 20 +++++++
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 26 ++++++---
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 2 -
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 20 +++++++
arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi | 68 ++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8568mds.dts | 4 +-
arch/powerpc/boot/dts/mpc8569mds.dts | 7 ++-
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 69 +++++++++++++++++++-----
arch/powerpc/boot/dts/p2041rdb.dts | 11 ++++
arch/powerpc/boot/dts/p3041ds.dts | 11 ++++
arch/powerpc/boot/dts/p4080ds.dts | 12 +++-
arch/powerpc/boot/dts/p5020ds.dts | 11 ++++
15 files changed, 285 insertions(+), 49 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
index 6a9cca8..64e7075 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -82,18 +82,19 @@
};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
- interrupts = <48 2 0 0 /* error */
- 49 2 0 0 /* bell_outb */
- 50 2 0 0 /* bell_inb */
- 53 2 0 0 /* msg1_tx */
- 54 2 0 0 /* msg1_rx */
- 55 2 0 0 /* msg2_tx */
- 56 2 0 0 /* msg2_rx */>;
- sleep = <&pmc 0x00080000 /* controller */
- &pmc 0x00040000>; /* message unit */
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
};
&soc {
@@ -178,6 +179,10 @@
};
/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
global-utilities@e0000 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
index eb75a18..3e6346a 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -70,17 +70,25 @@
};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
- interrupts = <48 2 0 0 /* error */
- 49 2 0 0 /* bell_outb */
- 50 2 0 0 /* bell_inb */
- 53 2 0 0 /* msg1_tx */
- 54 2 0 0 /* msg1_rx */
- 55 2 0 0 /* msg2_tx */
- 56 2 0 0 /* msg2_rx */>;
+ fsl,srio-rmu-handle = <&rmu>;
sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
};
&soc {
@@ -159,6 +167,10 @@
};
/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
global-utilities@e0000 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 8d037cf..234a399 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -120,6 +120,26 @@
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 9cda481..d41d08d 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -147,6 +147,26 @@
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 1510991..8d35d2c 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -121,17 +121,24 @@
};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
};
&dcsr {
@@ -280,6 +287,7 @@
16 2 1 30>;
};
+/include/ "qoriq-rmu-0.dtsi"
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index b353ac9..b9556ee 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -69,8 +69,6 @@
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
};
cpus {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 7135c67..914074b 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -147,6 +147,26 @@
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 0000000..587ca9f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 02eaad3..09598bb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -297,7 +297,9 @@
rio: rapidio@e00c00000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
- ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
};
leds {
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 976a7f9..7e283c8 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -440,7 +440,12 @@
rio: rapidio@e00c00000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
- ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
+ port2 {
+ status = "disabled";
+ };
};
};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 848320e..fb8640e 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,13 +26,6 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map. The most likely case is that we have PCI, so comment out the
- * rapidio node. Leave it here for reference.
- */
- /* rapidio0 = &rapidio0; */
};
cpus {
@@ -361,6 +354,41 @@
device_type = "open-pic";
};
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 /* msg1_tx_irq */
+ 54 2>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 /* msg2_tx_irq */
+ 56 2>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 /* bell_outb_irq */
+ 50 2>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2>;
+ };
+ };
+
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
@@ -612,16 +640,27 @@
};
};
/*
- rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+
+ rapidio@ffec0000 {
+ reg = <0xffec0000 0x11000>;
+ compatible = "fsl,srio";
+ interrupt-parent = <&mpic>;
+ interrupts = <48 2>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- reg = <0xffec0000 0x20000>;
- ranges = <0 0 0x80000000 0 0x20000000>;
- interrupt-parent = <&mpic>;
- // err_irq bell_outb_irq bell_inb_irq
- // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
- interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
+ };
};
*/
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index d6ea24d..4f957db 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -108,6 +108,17 @@
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index 1053d69..f469145 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -101,6 +101,17 @@
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 8ea1ae9..6d60e54 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -108,9 +108,15 @@
};
};
- rio: rapidio0: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x20000>;
- ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
};
lbc: localbus@ffe124000 {
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index ceee4f5..1c25068 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -101,6 +101,17 @@
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
--
1.7.3.4
^ permalink raw reply related
* Re: [PATCH 21/29] powerpc/85xx: Rework P1022DS device tree
From: Tabi Timur-B04825 @ 2011-11-17 14:01 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1321514181-28897-21-git-send-email-galak@kernel.crashing.org>
On Thu, Nov 17, 2011 at 1:16 AM, Kumar Gala <galak@kernel.crashing.org> wro=
te:
> - =A0 =A0 =A0 localbus@fffe05000 {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <2>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <1>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,p1022-elbc", "fsl,elbc"=
, "simple-bus";
> + =A0 =A0 =A0 lbc: localbus@fffe05000 {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0 0xffe05000 0 0x1000>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 interrupts =3D <19 2 0 0>;
The 'reg' property is still wrong. It should be <0xf 0xffe05000 0 0x1000>;
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply
* [PATCH net-next] ibm/emac: fix improper cleanup when device is removed to allow re-bind
From: Wolfgang Grandegger @ 2011-11-17 13:06 UTC (permalink / raw)
To: Netdev; +Cc: Linuxppc-dev
The re-binding (unbind..bind) of an EMAC device fails because the
static variable "busy_phy_map" is not updated when the device is
removed.
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
---
drivers/net/ethernet/ibm/emac/core.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index ed79b2d..2abce96 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -2924,6 +2924,9 @@ static int __devexit emac_remove(struct platform_device *ofdev)
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
zmii_detach(dev->zmii_dev, dev->zmii_port);
+ busy_phy_map &= ~(1 << dev->phy.address);
+ DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
+
mal_unregister_commac(dev->mal, &dev->commac);
emac_put_deps(dev);
--
1.7.4.1
^ permalink raw reply related
* [RFC PATCH v2 0/4] cpuidle: (POWER) cpuidle driver for pSeries
From: Deepthi Dharwar @ 2011-11-17 11:28 UTC (permalink / raw)
To: linuxppc-dev, linux-pm, linux-pm; +Cc: linux-kernel
This patch series ports the cpuidle framework for ppc64 platform and
implements a cpuidle back-end driver for ppc64 (pSeries) platform.
Currently idle states are managed by pseries_{dedicated,shared}_idle_sleep()
routines in arch/powerpc/platforms/pseries/setup.c. There are
two idle states (snooze and cede) that are exploited by
these routines based on simple heuristics.
Moving the idle states over to cpuidle framework can take advantage of
the advanced heuristics, tunables, and features provided by cpuidle
framework. Additional idle states like extended cede with hints would be
included and exploited using the cpuidle framework. The statistics and
tracing infrastructure provided by the cpuidle framework also helps in
enabling power management related tools and help tune the system and
applications.
This series aims to maintain compatibility and functionality to
existing pSeries idle cpu management code. There are no new functions
or idle states added as part of this series.
The previous version of this patch can be found at
https://lkml.org/lkml/2011/6/7/375
Changes from the previous version (v1):
1] Rebased to latest 3.2-rc2
2] Incorporated the changes from the feedback provided by Ben
in the previous version of this series.
3] The first three patches in this series posted in v1 are not
re-posted as they were taken from "idle cleanup - v3" posted by
Len Brown (https://lkml.org/lkml/2011/4/2/8) which have made
to the mainline in 3.1.
This cleanup was a community requirement and major dependency
before cpuidle framework can be ported over to powerpc
architecture.
This patch series includes:
[1/4] - Provides arch specific cpu_idle_wait() function required by cpuidle
subsystem.
[2/4] - pseries_idle cpuidle driver
[3/4] - Enables cpuidle for pSeries and directly calls cpuidle_idle_call()
[4/4] - Handles powersave=off kernel boot parameter and disables registration
of pseries_idle cpuidle driver.
This series has been tested on ppc64 pSeries POWER7 system with the snooze
and cede states
--
arch/powerpc/Kconfig | 4
arch/powerpc/include/asm/processor.h | 3
arch/powerpc/include/asm/system.h | 9 +
arch/powerpc/kernel/idle.c | 26 ++
arch/powerpc/kernel/sysfs.c | 2
arch/powerpc/platforms/Kconfig | 6
arch/powerpc/platforms/pseries/Kconfig | 9 +
arch/powerpc/platforms/pseries/Makefile | 1
arch/powerpc/platforms/pseries/processor_idle.c | 321 +++++++++++++++++++++++
arch/powerpc/platforms/pseries/pseries.h | 3
arch/powerpc/platforms/pseries/setup.c | 89 ------
arch/powerpc/platforms/pseries/smp.c | 1
include/linux/cpuidle.h | 2
13 files changed, 387 insertions(+), 89 deletions(-)
create mode 100644 arch/powerpc/platforms/pseries/processor_idle.c
-Deepthi
^ permalink raw reply
* Re: [PATCH v2 4/7] powerpc/85xx: add support to JOG feature using cpufreq interface
From: Zhao Chenhui @ 2011-11-17 11:53 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <4EC452B4.5090104@freescale.com>
On Wed, Nov 16, 2011 at 06:17:56PM -0600, Scott Wood wrote:
> On 11/16/2011 03:55 AM, Zhao Chenhui wrote:
> > From: Li Yang <leoli@freescale.com>
> >
> > Some 85xx silicons like MPC8536 and P1022 has the JOG PM feature.
>
> P1023 as well -- any plan to support?
>
> I see this in the p1022 and mpc8536 manuals:
>
> > The system operates as if a request to enter sleep mode has occurred, with the exception that the
> > values written into the PMCDR register (clock disable register for sleep/ deep sleep modes) are
> > ignored, and it is treated as if every bit in PMCDR is a logic 1. This means that the eTSECs, USB
> > controllers, DDR and eLBC will be stopped.
>
> ...which doesn't sound good.
>
> > The patch adds the support to change CPU frequency using the standard
> > cpufreq interface. Add the all PLL ratio core support. The ratio CORE
> > to CCB can 1:1(except MPC8536), 3:2, 2:1, 5:2, 3:1, 7:2 and 4:1.
>
> The ratios supported are implementation-specific. Only p1022 supports
> 1:1. p1023 supports only 3:2, 2:1, 5:2, and 3:1 (assuming the
> preliminary manual I have is accurate).
>
> > + local_irq_save(flags);
> > + /*
> > + * A Jog request can not be asserted when any core is in a low power
> > + * state. Before executing a jog request, any core which is in
> > + * a low power state must be waked by a interrupt.
> > + */
> > + if (mpc85xx_freqs == p1022_freqs_table) {
> > + powersave = ppc_md.power_save;
> > + ppc_md.power_save = NULL;
> > + wmb();
> > + val = in_be32(guts + POWMGTCSR);
> > + for_each_online_cpu(i) {
> > + if (val & ((POWMGTCSR_CORE0_DOZING |
> > + POWMGTCSR_CORE0_NAPPING) << (i * 2)))
> > + smp_send_reschedule(i);
> > + }
> > + }
>
> This is racy, what if another core read ppc_md.power_save just before
> you wrote NULL, but hasn't yet entered a low power state?
>
Yes, It's rare but it is possible. Perhaps I can check if the core is
in ppc_md.power_save() by the flag _TLF_NAPPING.
> You should send a reschedule to all cores regardless of what you see in
> POWMGTCSR.
>
> The p1022 also says that MSR[EE] should be zero -- it is on this core,
> but what about the other?
>
> > + setbits32(guts + POWMGTCSR, POWMGTCSR_JOG_MASK);
>
> This might work on p1022, but don't you have to go through a core reset
> on mpc8536? In that case, you can't just set the bit, you have to go
> through the deep sleep code to save/restore state.
>
> P1022 also says, "Mask all the interrupts to the cores by setting the
> bits CORE_UDE_MSK, CORE_MCP_MSK, CORE_INT_MSK and CORE_CINT_MSK in the
> POWMGTCSR," which I don't see happening.
I will fix them.
>
> Though, this directly contradicts where it later says, "The user must
> not issue a jog request at the same time as issuing a request
> for another low power mode, or while the system is in the process of
> entering a low power mode. This means that a jog request must not be
> asserted when any other bit of POWMGTCSR is non-zero. If the user tries
> to do this, the jog request is ignored."
>
> POWMGTCSR must be zero except for the JOG bit, but you must set other
> POWMGTCSR bits. Lovely. :-P I assume that the "This means..."
> statement is just wrong, and you really are supposed to set those other
> bits. P1023 refines the statement to, "This means that POWMGTCSR[JOG]
> must not be asserted when any of the other power management request bits
> (COREn_DOZ, SLP) in POWMGTCSR are set."
>
> > + if (powersave) {
> > + ppc_md.power_save = powersave;
> > + wmb();
> > + }
>
> How do you know the jog has happened at this point? Just because you've
> issued a store that requests it doesn't mean it has taken effect by the
> time you execute the next instruction.
>
> > + local_irq_restore(flags);
> > +
> > + /* verify */
> > + if (!spin_event_timeout(get_pll(hw_cpu) == pll, 10000, 10)) {
> > + pr_err("%s: Fail to switch the core frequency. "
> > + "The current PLL of core %d is %d instead of %d.\n",
> > + __func__, hw_cpu, get_pll(hw_cpu), pll);
> > + ret = -EINVAL;
> > + }
>
> Shouldn't the pll be where it's supposed to be as soon as we resume
> execution? I don't see a need to spin here, provided we properly wait
> for the jog to happen earlier (which we want to do so that we don't
> enable power_save and EE early).
I found some delay is needed to wait the pll to update in tests.
-chenhui
^ permalink raw reply
* [RFC PATCH v2 4/4] cpuidle: (POWER) Handle power_save=off
From: Deepthi Dharwar @ 2011-11-17 11:29 UTC (permalink / raw)
To: linuxppc-dev, linux-pm, linux-pm; +Cc: linux-kernel
In-Reply-To: <20111117112815.9191.2322.stgit@localhost6.localdomain6>
This patch makes pseries_idle_driver not to be registered when
power_save=off kernel boot option is specified. The
boot_option_idle_override variable used here is similar to
its usage on x86.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
---
arch/powerpc/include/asm/processor.h | 1 +
arch/powerpc/platforms/pseries/processor_idle.c | 4 ++++
2 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 811b7e7..b286fb7 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -382,6 +382,7 @@ static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
}
#endif
+extern unsigned long boot_option_idle_override;
enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index b5addd7..5f74b4e 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -260,6 +260,10 @@ static int pseries_idle_probe(void)
return -EPERM;
}
+ if (boot_option_idle_override != IDLE_NO_OVERRIDE) {
+ return -ENODEV;
+ }
+
if (!firmware_has_feature(FW_FEATURE_SPLPAR)) {
printk(KERN_DEBUG "Using default idle\n");
return -ENODEV;
^ permalink raw reply related
* [RFC PATCH v2 3/4] cpuidle: (POWER) Enable cpuidle and directly call cpuidle_idle_call() for pSeries
From: Deepthi Dharwar @ 2011-11-17 11:28 UTC (permalink / raw)
To: linuxppc-dev, linux-pm, linux-pm; +Cc: linux-kernel
In-Reply-To: <20111117112815.9191.2322.stgit@localhost6.localdomain6>
This patch enables cpuidle for pSeries and cpuidle_idle_call() is
directly called from the idle loop. As a result pseries_idle cpuidle
driver registered with cpuidle subsystem comes into action. This patch
also removes the routines pseries_shared_idle_sleep and
pseries_dedicated_idle_sleep as they are now implemented as part of
pseries_idle cpuidle driver.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
---
arch/powerpc/platforms/Kconfig | 6 ++
arch/powerpc/platforms/pseries/setup.c | 86 +-------------------------------
include/linux/cpuidle.h | 2 -
3 files changed, 8 insertions(+), 86 deletions(-)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e458872..0d2a028 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -211,6 +211,12 @@ config PPC_PASEMI_CPUFREQ
endmenu
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 9c6716a..f624e74 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
+#include <linux/cpuidle.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
static struct device_node *pSeries_mpic_node;
static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -374,18 +372,9 @@ static void __init pSeries_setup_arch(void)
pSeries_nvram_init();
- /* Choose an idle loop */
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
vpa_init(boot_cpuid);
- if (get_lppaca()->shared_proc) {
- printk(KERN_DEBUG "Using shared processor idle loop\n");
- ppc_md.power_save = pseries_shared_idle_sleep;
- } else {
- printk(KERN_DEBUG "Using dedicated idle loop\n");
- ppc_md.power_save = pseries_dedicated_idle_sleep;
- }
- } else {
- printk(KERN_DEBUG "Using default idle loop\n");
+ ppc_md.power_save = (void *)cpuidle_idle_call;
}
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -586,77 +575,6 @@ static int __init pSeries_probe(void)
return 1;
}
-static void pseries_dedicated_idle_sleep(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long start_snooze;
- unsigned long in_purr, out_purr;
- long snooze = __get_cpu_var(smt_snooze_delay);
-
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
- get_lppaca()->donate_dedicated_cpu = 1;
- in_purr = mfspr(SPRN_PURR);
-
- /*
- * We come in with interrupts disabled, and need_resched()
- * has been checked recently. If we should poll for a little
- * while, do so.
- */
- if (snooze) {
- start_snooze = get_tb() + snooze * tb_ticks_per_usec;
- local_irq_enable();
- set_thread_flag(TIF_POLLING_NRFLAG);
-
- while ((snooze < 0) || (get_tb() < start_snooze)) {
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- ppc64_runlatch_off();
- HMT_low();
- HMT_very_low();
- }
-
- HMT_medium();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb();
- local_irq_disable();
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- }
-
- cede_processor();
-
-out:
- HMT_medium();
- out_purr = mfspr(SPRN_PURR);
- get_lppaca()->wait_state_cycles += out_purr - in_purr;
- get_lppaca()->donate_dedicated_cpu = 0;
- get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
-
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- */
- cede_processor();
-
- get_lppaca()->idle = 0;
-}
-
static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 7408af8..23f81de 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -130,7 +130,6 @@ struct cpuidle_driver {
#ifdef CONFIG_CPU_IDLE
extern void disable_cpuidle(void);
extern int cpuidle_idle_call(void);
-
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
struct cpuidle_driver *cpuidle_get_driver(void);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
@@ -145,7 +144,6 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev);
#else
static inline void disable_cpuidle(void) { }
static inline int cpuidle_idle_call(void) { return -ENODEV; }
-
static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
{return -ENODEV; }
static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
^ permalink raw reply related
* [RFC PATCH v2 2/4] cpuidle: (POWER) cpuidle driver for pSeries
From: Deepthi Dharwar @ 2011-11-17 11:28 UTC (permalink / raw)
To: linuxppc-dev, linux-pm, linux-pm; +Cc: linux-kernel
In-Reply-To: <20111117112815.9191.2322.stgit@localhost6.localdomain6>
This patch implements a backhand cpuidle driver for pSeries
based on pseries_dedicated_idle_loop and pseries_shared_idle_loop
routines. The driver is built only if CONFIG_CPU_IDLE is set. This
cpuidle driver uses global registration of idle states and
not per-cpu.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
---
arch/powerpc/include/asm/system.h | 8 +
arch/powerpc/kernel/sysfs.c | 2
arch/powerpc/platforms/pseries/Kconfig | 9 +
arch/powerpc/platforms/pseries/Makefile | 1
arch/powerpc/platforms/pseries/processor_idle.c | 317 +++++++++++++++++++++++
arch/powerpc/platforms/pseries/pseries.h | 3
arch/powerpc/platforms/pseries/setup.c | 3
arch/powerpc/platforms/pseries/smp.c | 1
8 files changed, 341 insertions(+), 3 deletions(-)
create mode 100644 arch/powerpc/platforms/pseries/processor_idle.c
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index ff66680..f56a0a7 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -223,6 +223,14 @@ extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern int powersave_nap; /* set if nap mode can be used in idle loop */
void cpu_idle_wait(void);
+#ifdef CONFIG_PSERIES_IDLE
+extern void update_smt_snooze_delay(int snooze);
+extern int pseries_notify_cpuidle_add_cpu(int cpu);
+#else
+static inline void update_smt_snooze_delay(int snooze) {}
+static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; }
+#endif
+
/*
* Atomic exchange
*
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ce035c1..ebe5d78 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -18,6 +18,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/pmc.h>
+#include <asm/system.h>
#include "cacheinfo.h"
@@ -51,6 +52,7 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev,
return -EINVAL;
per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze;
+ update_smt_snooze_delay(snooze);
return count;
}
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c81f6bb..ae7b6d4 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -120,3 +120,12 @@ config DTL
which are accessible through a debugfs file.
Say N if you are unsure.
+
+config PSERIES_IDLE
+ tristate "Cpuidle driver for pSeries platforms"
+ depends on CPU_IDLE
+ depends on PPC_PSERIES
+ default y
+ help
+ Select this option to enable processor idle state management
+ through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3556e40..236db46 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_DTL) += dtl.o
obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
+obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o
ifeq ($(CONFIG_PPC_PSERIES),y)
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
new file mode 100644
index 0000000..b5addd7
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -0,0 +1,317 @@
+/*
+ * processor_idle - idle state cpuidle driver.
+ * Adapted from drivers/idle/intel_idle.c and
+ * drivers/acpi/processor_idle.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+
+#include <asm/paca.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+#include "plpar_wrappers.h"
+#include "pseries.h"
+
+struct cpuidle_driver pseries_idle_driver = {
+ .name = "pseries_idle",
+ .owner = THIS_MODULE,
+};
+
+#define MAX_IDLE_STATE_COUNT 2
+
+static int max_cstate = MAX_IDLE_STATE_COUNT - 1;
+static struct cpuidle_device __percpu *pseries_idle_cpuidle_devices;
+static struct cpuidle_state *cpuidle_state_table;
+
+void update_smt_snooze_delay(int snooze)
+{
+ struct cpuidle_driver *drv = cpuidle_get_driver();
+ if (drv)
+ drv->states[0].target_residency = snooze;
+}
+
+static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+{
+
+ *kt_before = ktime_get_real();
+ *in_purr = mfspr(SPRN_PURR);
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
+ get_lppaca()->donate_dedicated_cpu = 1;
+}
+
+static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+{
+ get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+ get_lppaca()->donate_dedicated_cpu = 0;
+ get_lppaca()->idle = 0;
+
+ return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+}
+
+
+static int snooze_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ while (!need_resched()) {
+ ppc64_runlatch_off();
+ HMT_low();
+ HMT_very_low();
+ }
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb();
+ local_irq_disable();
+
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int dedicated_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ ppc64_runlatch_off();
+ HMT_medium();
+ cede_processor();
+
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int shared_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ */
+ cede_processor();
+
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Snooze */
+ .name = "snooze",
+ .desc = "snooze",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &snooze_loop },
+ { /* CEDE */
+ .name = "CEDE",
+ .desc = "CEDE",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 10,
+ .enter = &dedicated_cede_loop },
+};
+
+/*
+ * States for shared partition case.
+ */
+static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Shared Cede */
+ .name = "Shared Cede",
+ .desc = "Shared Cede",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &shared_cede_loop },
+};
+
+int pseries_notify_cpuidle_add_cpu(int cpu)
+{
+ struct cpuidle_device *dev =
+ per_cpu_ptr(pseries_idle_cpuidle_devices, cpu);
+ if (dev && cpuidle_get_driver()) {
+ cpuidle_disable_device(dev);
+ cpuidle_enable_device(dev);
+ }
+ return 0;
+}
+
+/*
+ * pseries_idle_cpuidle_driver_init()
+ */
+static int pseries_idle_cpuidle_driver_init(void)
+{
+ int cstate;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+
+ drv->state_count = 0;
+
+ for (cstate = 0; cstate < MAX_IDLE_STATE_COUNT; ++cstate) {
+
+ if (cstate > max_cstate)
+ break;
+
+ /* is the state not enabled? */
+ if (cpuidle_state_table[cstate].enter == NULL)
+ continue;
+
+ drv->states[drv->state_count] = /* structure copy */
+ cpuidle_state_table[cstate];
+
+ if (cpuidle_state_table == dedicated_states)
+ drv->states[drv->state_count].target_residency =
+ __get_cpu_var(smt_snooze_delay);
+
+ drv->state_count += 1;
+ }
+
+ return 0;
+}
+
+/* pseries_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void pseries_idle_devices_uninit(void)
+{
+ int i;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_idle_cpuidle_devices, i);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(pseries_idle_cpuidle_devices);
+ return;
+}
+
+/* pseries_idle_devices_init()
+ * allocate, initialize and register cpuidle device
+ */
+static int pseries_idle_devices_init(void)
+{
+ int i;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+ struct cpuidle_device *dev;
+
+ pseries_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (pseries_idle_cpuidle_devices == NULL)
+ return -ENOMEM;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_idle_cpuidle_devices, i);
+ dev->state_count = drv->state_count;
+ dev->cpu = i;
+ if (cpuidle_register_device(dev)) {
+ printk(KERN_DEBUG \
+ "cpuidle_register_device %d failed!\n", i);
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * pseries_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int pseries_idle_probe(void)
+{
+ if (max_cstate == 0) {
+ printk(KERN_DEBUG "pseries processor idle disabled.\n");
+ return -EPERM;
+ }
+
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR)) {
+ printk(KERN_DEBUG "Using default idle\n");
+ return -ENODEV;
+ }
+
+ if (get_lppaca()->shared_proc)
+ cpuidle_state_table = shared_states;
+ else
+ cpuidle_state_table = dedicated_states;
+
+ return 0;
+}
+
+static int __init pseries_processor_idle_init(void)
+{
+ int retval;
+
+ retval = pseries_idle_probe();
+ if (retval)
+ return retval;
+
+ pseries_idle_cpuidle_driver_init();
+ retval = cpuidle_register_driver(&pseries_idle_driver);
+ if (retval) {
+ printk(KERN_DEBUG "Registration of pseries driver failed.\n");
+ return retval;
+ }
+
+ retval = pseries_idle_devices_init();
+ if (retval) {
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+ return retval;
+ }
+
+ printk(KERN_DEBUG "pseries_idle_driver registered\n");
+
+ return 0;
+}
+
+static void __exit pseries_processor_idle_exit(void)
+{
+
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+
+ return;
+}
+
+module_init(pseries_processor_idle_init);
+module_exit(pseries_processor_idle_exit);
+
+MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("Cpuidle driver for POWER");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 24c7162..9a3dda0 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -57,4 +57,7 @@ extern struct device_node *dlpar_configure_connector(u32);
extern int dlpar_attach_node(struct device_node *);
extern int dlpar_detach_node(struct device_node *);
+/* Snooze Delay, pseries_idle */
+DECLARE_PER_CPU(long, smt_snooze_delay);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c3408ca..9c6716a 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -586,9 +586,6 @@ static int __init pSeries_probe(void)
return 1;
}
-
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
static void pseries_dedicated_idle_sleep(void)
{
unsigned int cpu = smp_processor_id();
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 26e93fd..bbc3c42 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -148,6 +148,7 @@ static void __devinit smp_xics_setup_cpu(int cpu)
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
+ pseries_notify_cpuidle_add_cpu(cpu);
}
static int __devinit smp_pSeries_kick_cpu(int nr)
^ permalink raw reply related
* [RFC PATCH v2 1/4] cpuidle: (powerpc) Add cpu_idle_wait() to allow switching of idle routines
From: Deepthi Dharwar @ 2011-11-17 11:28 UTC (permalink / raw)
To: linuxppc-dev, linux-pm, linux-pm; +Cc: linux-kernel
In-Reply-To: <20111117112815.9191.2322.stgit@localhost6.localdomain6>
This patch provides cpu_idle_wait() routine for the powerpc
platform which is required by the cpuidle subsystem. This
routine is requied to change the idle handler on SMP systems.
The equivalent routine for x86 is in arch/x86/kernel/process.c
but the powerpc implementation is different.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com>
---
arch/powerpc/Kconfig | 4 ++++
arch/powerpc/include/asm/processor.h | 2 ++
arch/powerpc/include/asm/system.h | 1 +
arch/powerpc/kernel/idle.c | 26 ++++++++++++++++++++++++++
4 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b177caa..87f8604 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64
bool
default y if 64BIT
+config ARCH_HAS_CPU_IDLE_WAIT
+ bool
+ default y
+
config GENERIC_HWEIGHT
bool
default y
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index eb11a44..811b7e7 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -382,6 +382,8 @@ static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
}
#endif
+enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index e30a13d..ff66680 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -221,6 +221,7 @@ extern unsigned long klimit;
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern int powersave_nap; /* set if nap mode can be used in idle loop */
+void cpu_idle_wait(void);
/*
* Atomic exchange
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 39a2baa..b478c72 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -39,9 +39,13 @@
#define cpu_should_die() 0
#endif
+unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
+EXPORT_SYMBOL(boot_option_idle_override);
+
static int __init powersave_off(char *arg)
{
ppc_md.power_save = NULL;
+ boot_option_idle_override = IDLE_POWERSAVE_OFF;
return 0;
}
__setup("powersave=off", powersave_off);
@@ -102,6 +106,28 @@ void cpu_idle(void)
}
}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs come out of the old
+ * idle loop and start using the new idle loop.
+ * Required while changing idle handler on SMP systems.
+ * Caller must have changed idle handler to the new value before the call.
+ */
+void cpu_idle_wait(void)
+{
+ int cpu;
+ smp_mb();
+
+ /* kick all the CPUs so that they exit out of old idle routine */
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id())
+ smp_send_reschedule(cpu);
+ }
+ put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
int powersave_nap;
#ifdef CONFIG_SYSCTL
^ permalink raw reply related
* RE: [PATCH v2 2/7] powerpc/85xx: add HOTPLUG_CPU support
From: Li Yang-R58472 @ 2011-11-17 11:16 UTC (permalink / raw)
To: Wood Scott-B07421, Zhao Chenhui-B35336; +Cc: linuxppc-dev@lists.ozlabs.org
In-Reply-To: <4EC408C1.1040400@freescale.com>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^ permalink raw reply
* [PATCH v2 7/7] gianfar: add support for wake-on-packet
From: Zhao Chenhui @ 2011-11-17 11:10 UTC (permalink / raw)
To: linuxppc-dev; +Cc: netdev, afleming
On certain chip like MPC8536 and P1022, system can be waked up from
sleep by user-defined packet and Magic Patcket.(The eTSEC cannot
supports both types of wake-up event simultaneously.) This patch
implements wake-up on user-defined patcket including ARP request
packet and unicast patcket to this station.
When entering suspend state, the gianfar driver sets receive queue
filer table to filter all of packets except ARP request packet and
unicast patcket to this station. The driver temporarily uses the last
receive queue to receive the user defined packet.
In suspend state, the receive part of eTSEC keeps working. When
receiving a user defined packet, it generates an interrupt to
wake up the system.
The rule of the filer table is as below.
if (arp request to local ip address)
accept it to the last queue
elif (unicast packet to local mac address)
accept it to the last queue
else
reject it
endif
Note: The local ip/mac address is the ethernet primary IP/MAC address of
the station. Do not support multiple IP/MAC addresses.
Here is an example of enabling and testing wake up on user defined packet.
ifconfig eth0 10.193.20.169
ethtool -s eth0 wol a
echo standby > /sys/power/state or echo mem > /sys/power/state
Ping from PC host to wake up the station:
ping 10.193.20.169
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
---
Changes for v2:
- rework gfar_get_ip(), gfar_config_filer_table(), gfar_suspend() and gfar_resume()
- add support unicast wakeup
- add supported in struct gfar_private
.../devicetree/bindings/net/fsl-tsec-phy.txt | 3 +
drivers/net/ethernet/freescale/gianfar.c | 362 +++++++++++++++++---
drivers/net/ethernet/freescale/gianfar.h | 33 ++-
drivers/net/ethernet/freescale/gianfar_ethtool.c | 52 ++-
4 files changed, 372 insertions(+), 78 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 2c6be03..543e36c 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -56,6 +56,9 @@ Properties:
hardware.
- fsl,magic-packet : If present, indicates that the hardware supports
waking up via magic packet.
+ - fsl,wake-on-filer : If present, indicates that the hardware supports
+ waking up via arp request to local ip address or unicast packet to
+ local mac address.
- bd-stash : If present, indicates that the hardware supports stashing
buffer descriptors in the L2.
- rx-stash-len : Denotes the number of bytes of a received buffer to stash
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 83199fd..991bd47 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -85,6 +85,8 @@
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/in.h>
+#include <linux/inetdevice.h>
+#include <sysdev/fsl_soc.h>
#include <linux/net_tstamp.h>
#include <asm/io.h>
@@ -147,6 +149,17 @@ static void gfar_clear_exact_match(struct net_device *dev);
static void gfar_set_mac_for_addr(struct net_device *dev, int num,
const u8 *addr);
static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp);
+
+#ifdef CONFIG_PM
+static void gfar_halt_rx(struct net_device *dev);
+static void gfar_rx_start(struct net_device *dev);
+static void gfar_enable_filer(struct net_device *dev);
+static void gfar_disable_filer(struct net_device *dev);
+static void gfar_config_filer_table(struct net_device *dev);
+static void gfar_restore_filer_table(struct net_device *dev);
+static int gfar_get_ip(struct net_device *dev);
+#endif
MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
@@ -751,7 +764,6 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
FSL_GIANFAR_DEV_HAS_PADDING |
FSL_GIANFAR_DEV_HAS_CSUM |
FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_MAGIC_PACKET |
FSL_GIANFAR_DEV_HAS_EXTENDED_HASH |
FSL_GIANFAR_DEV_HAS_TIMER;
@@ -763,8 +775,19 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
else
priv->interface = PHY_INTERFACE_MODE_MII;
- if (of_get_property(np, "fsl,magic-packet", NULL))
+ /* Init Wake-on-LAN */
+ priv->wol_opts = 0;
+ priv->wol_supported = 0;
+ if (of_get_property(np, "fsl,magic-packet", NULL)) {
priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+ priv->wol_supported |= GIANFAR_WOL_MAGIC;
+ }
+
+ if (of_get_property(np, "fsl,wake-on-filer", NULL)) {
+ priv->device_flags |= FSL_GIANFAR_DEV_HAS_WAKE_ON_FILER;
+ priv->wol_supported |= GIANFAR_WOL_ARP;
+ priv->wol_supported |= GIANFAR_WOL_UCAST;
+ }
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
@@ -1168,8 +1191,10 @@ static int gfar_probe(struct platform_device *ofdev)
goto register_fail;
}
- device_init_wakeup(&dev->dev,
- priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
+ if (priv->wol_supported) {
+ device_set_wakeup_capable(&ofdev->dev, true);
+ device_set_wakeup_enable(&ofdev->dev, false);
+ }
/* fill out IRQ number and name fields */
len_devname = strlen(dev->name);
@@ -1260,6 +1285,143 @@ static int gfar_remove(struct platform_device *ofdev)
}
#ifdef CONFIG_PM
+static void gfar_enable_filer(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
+ u32 temp;
+
+ lock_rx_qs(priv);
+
+ temp = gfar_read(®s->rctrl);
+ temp &= ~(RCTRL_FSQEN | RCTRL_PRSDEP_MASK);
+ temp |= RCTRL_FILREN | RCTRL_PRSDEP_L2L3;
+ gfar_write(®s->rctrl, temp);
+
+ unlock_rx_qs(priv);
+}
+
+static void gfar_disable_filer(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
+ u32 temp;
+
+ lock_rx_qs(priv);
+
+ temp = gfar_read(®s->rctrl);
+ temp &= ~RCTRL_FILREN;
+ gfar_write(®s->rctrl, temp);
+
+ unlock_rx_qs(priv);
+}
+
+static int gfar_get_ip(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct in_device *in_dev;
+ int ret = -ENOENT;
+
+ in_dev = in_dev_get(dev);
+ if (!in_dev)
+ return ret;
+
+ /* Get the primary IP address */
+ for_primary_ifa(in_dev) {
+ priv->ip_addr = ifa->ifa_address;
+ ret = 0;
+ break;
+ } endfor_ifa(in_dev);
+
+ in_dev_put(in_dev);
+ return ret;
+}
+
+static void gfar_restore_filer_table(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 rqfcr, rqfpr;
+ int i;
+
+ lock_rx_qs(priv);
+
+ for (i = 0; i <= MAX_FILER_IDX; i++) {
+ rqfcr = priv->ftp_rqfcr[i];
+ rqfpr = priv->ftp_rqfpr[i];
+ gfar_write_filer(priv, i, rqfcr, rqfpr);
+ }
+
+ unlock_rx_qs(priv);
+}
+
+static void gfar_config_filer_table(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 dest_mac_addr;
+ u32 rqfcr, rqfpr;
+ u8 rqfcr_queue = priv->num_rx_queues - 1;
+ unsigned int index;
+
+ if (gfar_get_ip(dev)) {
+ netif_err(priv, wol, dev, "WOL: get the ip address error\n");
+ return;
+ }
+
+ lock_rx_qs(priv);
+
+ /* init filer table */
+ rqfcr = RQFCR_RJE | RQFCR_CMP_MATCH;
+ rqfpr = 0x0;
+ for (index = 0; index <= MAX_FILER_IDX; index++)
+ gfar_write_filer(priv, index, rqfcr, rqfpr);
+
+ index = 0;
+ if (priv->wol_opts & GIANFAR_WOL_ARP) {
+ /* ARP request filer, filling the packet to the last queue */
+ rqfcr = (rqfcr_queue << 10) | RQFCR_AND |
+ RQFCR_CMP_EXACT | RQFCR_PID_MASK;
+ rqfpr = RQFPR_ARQ;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+
+ rqfcr = (rqfcr_queue << 10) | RQFCR_AND |
+ RQFCR_CMP_EXACT | RQFCR_PID_PARSE;
+ rqfpr = RQFPR_ARQ;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+
+ /*
+ * DEST_IP address in ARP packet,
+ * filling it to the last queue.
+ */
+ rqfcr = (rqfcr_queue << 10) | RQFCR_AND |
+ RQFCR_CMP_EXACT | RQFCR_PID_MASK;
+ rqfpr = FPR_FILER_MASK;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+
+ rqfcr = (rqfcr_queue << 10) | RQFCR_GPI |
+ RQFCR_CMP_EXACT | RQFCR_PID_DIA;
+ rqfpr = priv->ip_addr;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+ }
+
+ if (priv->wol_opts & GIANFAR_WOL_UCAST) {
+ /* Unicast packet, filling it to the last queue */
+ dest_mac_addr = (dev->dev_addr[0] << 16) |
+ (dev->dev_addr[1] << 8) | dev->dev_addr[2];
+ rqfcr = (rqfcr_queue << 10) | RQFCR_AND |
+ RQFCR_CMP_EXACT | RQFCR_PID_DAH;
+ rqfpr = dest_mac_addr;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+
+ dest_mac_addr = (dev->dev_addr[3] << 16) |
+ (dev->dev_addr[4] << 8) | dev->dev_addr[5];
+ rqfcr = (rqfcr_queue << 10) | RQFCR_GPI |
+ RQFCR_CMP_EXACT | RQFCR_PID_DAL;
+ rqfpr = dest_mac_addr;
+ gfar_write_filer(priv, index++, rqfcr, rqfpr);
+ }
+
+ unlock_rx_qs(priv);
+}
static int gfar_suspend(struct device *dev)
{
@@ -1269,48 +1431,43 @@ static int gfar_suspend(struct device *dev)
unsigned long flags;
u32 tempval;
- int magic_packet = priv->wol_en &&
- (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
-
netif_device_detach(ndev);
- if (netif_running(ndev)) {
-
- local_irq_save(flags);
- lock_tx_qs(priv);
- lock_rx_qs(priv);
-
- gfar_halt_nodisable(ndev);
-
- /* Disable Tx, and Rx if wake-on-LAN is disabled. */
- tempval = gfar_read(®s->maccfg1);
-
- tempval &= ~MACCFG1_TX_EN;
+ if (!netif_running(ndev))
+ return 0;
- if (!magic_packet)
- tempval &= ~MACCFG1_RX_EN;
+ local_irq_save(flags);
+ lock_tx_qs(priv);
+ lock_rx_qs(priv);
- gfar_write(®s->maccfg1, tempval);
+ gfar_halt(ndev);
- unlock_rx_qs(priv);
- unlock_tx_qs(priv);
- local_irq_restore(flags);
+ unlock_rx_qs(priv);
+ unlock_tx_qs(priv);
+ local_irq_restore(flags);
- disable_napi(priv);
+ disable_napi(priv);
- if (magic_packet) {
- /* Enable interrupt on Magic Packet */
- gfar_write(®s->imask, IMASK_MAG);
+ if (!priv->wol_opts && priv->phydev) {
+ phy_stop(priv->phydev);
+ return 0;
+ }
- /* Enable Magic Packet mode */
- tempval = gfar_read(®s->maccfg2);
- tempval |= MACCFG2_MPEN;
- gfar_write(®s->maccfg2, tempval);
- } else {
- phy_stop(priv->phydev);
- }
+ mpc85xx_pmc_set_wake(priv->ofdev, 1);
+ if (priv->wol_opts & GIANFAR_WOL_MAGIC) {
+ /* Enable Magic Packet mode */
+ tempval = gfar_read(®s->maccfg2);
+ tempval |= MACCFG2_MPEN;
+ gfar_write(®s->maccfg2, tempval);
}
+ if (priv->wol_opts & (GIANFAR_WOL_ARP | GIANFAR_WOL_UCAST)) {
+ mpc85xx_pmc_set_lossless_ethernet(1);
+ gfar_disable_filer(ndev);
+ gfar_config_filer_table(ndev);
+ gfar_enable_filer(ndev);
+ }
+ gfar_rx_start(ndev);
return 0;
}
@@ -1320,39 +1477,49 @@ static int gfar_resume(struct device *dev)
struct net_device *ndev = priv->ndev;
struct gfar __iomem *regs = priv->gfargrp[0].regs;
unsigned long flags;
- u32 tempval;
- int magic_packet = priv->wol_en &&
- (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
+ u32 tempval, i;
if (!netif_running(ndev)) {
netif_device_attach(ndev);
return 0;
}
- if (!magic_packet && priv->phydev)
+ if (!priv->wol_opts && priv->phydev) {
phy_start(priv->phydev);
+ goto out;
+ }
+
+ mpc85xx_pmc_set_wake(priv->ofdev, 0);
- /* Disable Magic Packet mode, in case something
- * else woke us up.
- */
local_irq_save(flags);
- lock_tx_qs(priv);
lock_rx_qs(priv);
-
- tempval = gfar_read(®s->maccfg2);
- tempval &= ~MACCFG2_MPEN;
- gfar_write(®s->maccfg2, tempval);
-
- gfar_start(ndev);
-
+ gfar_halt_rx(ndev);
unlock_rx_qs(priv);
- unlock_tx_qs(priv);
local_irq_restore(flags);
- netif_device_attach(ndev);
+ if (priv->wol_opts & (GIANFAR_WOL_ARP | GIANFAR_WOL_UCAST)) {
+ mpc85xx_pmc_set_lossless_ethernet(0);
+ gfar_disable_filer(ndev);
+ gfar_restore_filer_table(ndev);
+ }
+
+ if (priv->wol_opts & GIANFAR_WOL_MAGIC) {
+ /* Disable Magic Packet mode */
+ tempval = gfar_read(®s->maccfg2);
+ tempval &= ~MACCFG2_MPEN;
+ gfar_write(®s->maccfg2, tempval);
+ }
+out:
+ gfar_start(ndev);
+ netif_device_attach(ndev);
enable_napi(priv);
+ if (priv->wol_opts & (GIANFAR_WOL_ARP | GIANFAR_WOL_UCAST)) {
+ /* send requests to process the received packets */
+ for (i = 0; i < priv->num_grps; i++)
+ gfar_schedule_cleanup(&priv->gfargrp[i]);
+ }
return 0;
}
@@ -1602,6 +1769,48 @@ static int __gfar_is_rx_idle(struct gfar_private *priv)
return 0;
}
+#ifdef CONFIG_PM
+/* Halt the receive queues */
+static void gfar_halt_rx(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
+ u32 tempval;
+ int i = 0;
+
+ for (i = 0; i < priv->num_grps; i++) {
+ regs = priv->gfargrp[i].regs;
+ /* Mask all interrupts */
+ gfar_write(®s->imask, IMASK_INIT_CLEAR);
+
+ /* Clear all interrupts */
+ gfar_write(®s->ievent, IEVENT_INIT_CLEAR);
+ }
+
+ regs = priv->gfargrp[0].regs;
+ /* Stop the DMA, and wait for it to stop */
+ tempval = gfar_read(®s->dmactrl);
+ if ((tempval & DMACTRL_GRS) != DMACTRL_GRS) {
+ int ret;
+
+ tempval |= DMACTRL_GRS;
+ gfar_write(®s->dmactrl, tempval);
+
+ do {
+ ret = spin_event_timeout(((gfar_read(®s->ievent) &
+ IEVENT_GRSC) == IEVENT_GRSC), 1000000, 0);
+ if (!ret && !(gfar_read(®s->ievent) & IEVENT_GRSC))
+ ret = __gfar_is_rx_idle(priv);
+ } while (!ret);
+ }
+
+ /* Disable Rx in MACCFG1 */
+ tempval = gfar_read(®s->maccfg1);
+ tempval &= ~MACCFG1_RX_EN;
+ gfar_write(®s->maccfg1, tempval);
+}
+#endif
+
/* Halt the receive and transmit queues */
static void gfar_halt_nodisable(struct net_device *dev)
{
@@ -1808,6 +2017,40 @@ void gfar_start(struct net_device *dev)
dev->trans_start = jiffies; /* prevent tx timeout */
}
+#ifdef CONFIG_PM
+void gfar_rx_start(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
+ u32 tempval;
+ int i = 0;
+
+ /* Enable Rx in MACCFG1 */
+ tempval = gfar_read(®s->maccfg1);
+ tempval |= MACCFG1_RX_EN;
+ gfar_write(®s->maccfg1, tempval);
+
+ /* Initialize DMACTRL to have WWR and WOP */
+ tempval = gfar_read(®s->dmactrl);
+ tempval |= DMACTRL_INIT_SETTINGS;
+ gfar_write(®s->dmactrl, tempval);
+
+ /* Make sure we aren't stopped */
+ tempval = gfar_read(®s->dmactrl);
+ tempval &= ~DMACTRL_GRS;
+ gfar_write(®s->dmactrl, tempval);
+
+ for (i = 0; i < priv->num_grps; i++) {
+ regs = priv->gfargrp[i].regs;
+ /* Clear RHLT, so that the DMA starts polling now */
+ gfar_write(®s->rstat, priv->gfargrp[i].rstat);
+
+ /* Unmask the interrupts we look for */
+ gfar_write(®s->imask, IMASK_DEFAULT);
+ }
+}
+#endif
+
void gfar_configure_coalescing(struct gfar_private *priv,
unsigned long tx_mask, unsigned long rx_mask)
{
@@ -1970,7 +2213,7 @@ static int gfar_enet_open(struct net_device *dev)
netif_tx_start_all_queues(dev);
- device_set_wakeup_enable(&dev->dev, priv->wol_en);
+ device_set_wakeup_enable(&priv->ofdev->dev, priv->wol_opts);
return err;
}
@@ -2657,6 +2900,17 @@ static inline void count_errors(unsigned short status, struct net_device *dev)
irqreturn_t gfar_receive(int irq, void *grp_id)
{
+ struct gfar_priv_grp *gfargrp = grp_id;
+ struct gfar __iomem *regs = gfargrp->regs;
+ u32 ievent;
+
+ ievent = gfar_read(®s->ievent);
+
+ if ((ievent & IEVENT_FGPI) == IEVENT_FGPI) {
+ gfar_write(®s->ievent, ievent & IEVENT_RX_MASK);
+ return IRQ_HANDLED;
+ }
+
gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
return IRQ_HANDLED;
}
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 9aa4377..1abebc4 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -232,6 +232,13 @@ extern const char gfar_driver_version[];
#define RQUEUE_EN7 0x00000001
#define RQUEUE_EN_ALL 0x000000FF
+/* Wake-On-Lan options */
+#define GIANFAR_WOL_UCAST 0x00000001 /* Unicast wakeup */
+#define GIANFAR_WOL_MCAST 0x00000002 /* Multicast wakeup */
+#define GIANFAR_WOL_BCAST 0x00000004 /* Broadcase wakeup */
+#define GIANFAR_WOL_ARP 0x00000008 /* ARP request wakeup */
+#define GIANFAR_WOL_MAGIC 0x00000010 /* Magic packet wakeup */
+
/* Init to do tx snooping for buffers and descriptors */
#define DMACTRL_INIT_SETTINGS 0x000000c3
#define DMACTRL_GRS 0x00000010
@@ -277,11 +284,15 @@ extern const char gfar_driver_version[];
#define RCTRL_PAL_MASK 0x001f0000
#define RCTRL_VLEX 0x00002000
#define RCTRL_FILREN 0x00001000
+#define RCTRL_FSQEN 0x00000800
#define RCTRL_GHTX 0x00000400
#define RCTRL_IPCSEN 0x00000200
#define RCTRL_TUCSEN 0x00000100
#define RCTRL_PRSDEP_MASK 0x000000c0
#define RCTRL_PRSDEP_INIT 0x000000c0
+#define RCTRL_PRSDEP_L2 0x00000040
+#define RCTRL_PRSDEP_L2L3 0x00000080
+#define RCTRL_PRSDEP_L2L3L4 0x000000c0
#define RCTRL_PRSFM 0x00000020
#define RCTRL_PROM 0x00000008
#define RCTRL_EMEN 0x00000002
@@ -327,18 +338,20 @@ extern const char gfar_driver_version[];
#define IEVENT_MAG 0x00000800
#define IEVENT_GRSC 0x00000100
#define IEVENT_RXF0 0x00000080
+#define IEVENT_FGPI 0x00000010
#define IEVENT_FIR 0x00000008
#define IEVENT_FIQ 0x00000004
#define IEVENT_DPE 0x00000002
#define IEVENT_PERR 0x00000001
-#define IEVENT_RX_MASK (IEVENT_RXB0 | IEVENT_RXF0 | IEVENT_BSY)
+#define IEVENT_RX_MASK (IEVENT_RXB0 | IEVENT_RXF0 | \
+ IEVENT_FGPI | IEVENT_BSY)
#define IEVENT_TX_MASK (IEVENT_TXB | IEVENT_TXF)
#define IEVENT_RTX_MASK (IEVENT_RX_MASK | IEVENT_TX_MASK)
#define IEVENT_ERR_MASK \
-(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
- IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
- | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
- | IEVENT_MAG | IEVENT_BABR)
+ (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
+ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC | \
+ IEVENT_CRL | IEVENT_XFUN | IEVENT_FIR | IEVENT_FIQ | \
+ IEVENT_DPE | IEVENT_PERR | IEVENT_MAG | IEVENT_BABR)
#define IMASK_INIT_CLEAR 0x00000000
#define IMASK_BABR 0x80000000
@@ -359,14 +372,15 @@ extern const char gfar_driver_version[];
#define IMASK_MAG 0x00000800
#define IMASK_GRSC 0x00000100
#define IMASK_RXFEN0 0x00000080
+#define IMASK_FGPI 0x00000010
#define IMASK_FIR 0x00000008
#define IMASK_FIQ 0x00000004
#define IMASK_DPE 0x00000002
#define IMASK_PERR 0x00000001
#define IMASK_DEFAULT (IMASK_TXEEN | IMASK_TXFEN | IMASK_TXBEN | \
IMASK_RXFEN0 | IMASK_BSY | IMASK_EBERR | IMASK_BABR | \
- IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \
- | IMASK_PERR)
+ IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_FGPI | \
+ IMASK_FIR | IMASK_FIQ | IMASK_DPE | IMASK_PERR | IMASK_MAG)
#define IMASK_RTX_DISABLED ((~(IMASK_RXFEN0 | IMASK_TXFEN | IMASK_BSY)) \
& IMASK_DEFAULT)
@@ -883,6 +897,7 @@ struct gfar {
#define FSL_GIANFAR_DEV_HAS_BD_STASHING 0x00000200
#define FSL_GIANFAR_DEV_HAS_BUF_STASHING 0x00000400
#define FSL_GIANFAR_DEV_HAS_TIMER 0x00000800
+#define FSL_GIANFAR_DEV_HAS_WAKE_ON_FILER 0x00001000
#if (MAXGROUPS == 2)
#define DEFAULT_MAPPING 0xAA
@@ -1115,6 +1130,10 @@ struct gfar_private {
struct work_struct reset_task;
+ u32 ip_addr;
+ u32 wol_opts;
+ u32 wol_supported;
+
/* Network Statistics */
struct gfar_extra_stats extra_stats;
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 212736b..296e762 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -29,6 +29,7 @@
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -577,32 +578,49 @@ static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct gfar_private *priv = netdev_priv(dev);
- if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) {
- wol->supported = WAKE_MAGIC;
- wol->wolopts = priv->wol_en ? WAKE_MAGIC : 0;
- } else {
- wol->supported = wol->wolopts = 0;
- }
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ if (!priv->wol_supported || !device_can_wakeup(&priv->ofdev->dev))
+ return;
+
+ if (priv->wol_supported & GIANFAR_WOL_MAGIC)
+ wol->supported |= WAKE_MAGIC;
+
+ if (priv->wol_supported & GIANFAR_WOL_ARP)
+ wol->supported |= WAKE_ARP;
+
+ if (priv->wol_supported & GIANFAR_WOL_UCAST)
+ wol->supported |= WAKE_UCAST;
+
+ if (priv->wol_opts & GIANFAR_WOL_MAGIC)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (priv->wol_opts & GIANFAR_WOL_ARP)
+ wol->wolopts |= WAKE_ARP;
+
+ if (priv->wol_opts & GIANFAR_WOL_UCAST)
+ wol->wolopts |= WAKE_UCAST;
}
static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct gfar_private *priv = netdev_priv(dev);
- unsigned long flags;
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
- wol->wolopts != 0)
- return -EINVAL;
-
- if (wol->wolopts & ~WAKE_MAGIC)
- return -EINVAL;
+ if (!priv->wol_supported || !device_can_wakeup(&priv->ofdev->dev) ||
+ (wol->wolopts & ~(WAKE_MAGIC | WAKE_ARP | WAKE_UCAST)))
+ return -EOPNOTSUPP;
- device_set_wakeup_enable(&dev->dev, wol->wolopts & WAKE_MAGIC);
+ priv->wol_opts = 0;
- spin_lock_irqsave(&priv->bflock, flags);
- priv->wol_en = !!device_may_wakeup(&dev->dev);
- spin_unlock_irqrestore(&priv->bflock, flags);
+ if (wol->wolopts & WAKE_MAGIC)
+ priv->wol_opts |= GIANFAR_WOL_MAGIC;
+ if (wol->wolopts & WAKE_ARP)
+ priv->wol_opts |= GIANFAR_WOL_ARP;
+ if (wol->wolopts & WAKE_UCAST)
+ priv->wol_opts |= GIANFAR_WOL_UCAST;
+ device_set_wakeup_enable(&priv->ofdev->dev, (u32)priv->wol_opts);
return 0;
}
#endif
--
1.6.4.1
^ permalink raw reply related
* [PATCH 29/29] powerpc/85xx: Rework P5020DS device tree
From: Kumar Gala @ 2011-11-17 7:16 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321514181-28897-28-git-send-email-galak@kernel.crashing.org>
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p5020-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
* Removed mpic interrupt-parent from sec nodes, just use top level
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 335 +++++++++++++
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 96 ++++
arch/powerpc/boot/dts/p5020ds.dts | 13 +-
arch/powerpc/boot/dts/p5020si.dtsi | 716 ---------------------------
4 files changed, 441 insertions(+), 719 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p5020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 0000000..7135c67
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,335 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p5020-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 0000000..ae823a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P5020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d4099..ceee4f5 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -176,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -191,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -206,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -217,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad..0000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P5020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e5500@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e5500@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p5020-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p5020-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p5020-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p5020-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* oprofile callgraph support missing for common cpus
From: Joakim Tjernlund @ 2011-11-17 8:38 UTC (permalink / raw)
To: linuxppc-dev; +Cc: oprofile-list
arch/powerpc/oprofile/common.c has this init code:
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
if (!cur_cpu_spec->oprofile_cpu_type)
return -ENODEV;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
switch (cur_cpu_spec->oprofile_type) {
#ifdef CONFIG_PPC_BOOK3S_64
#ifdef CONFIG_OPROFILE_CELL
case PPC_OPROFILE_CELL:
if (firmware_has_feature(FW_FEATURE_LPAR))
return -ENODEV;
model = &op_model_cell;
ops->sync_start = model->sync_start;
ops->sync_stop = model->sync_stop;
break;
#endif
case PPC_OPROFILE_RS64:
model = &op_model_rs64;
break;
case PPC_OPROFILE_POWER4:
model = &op_model_power4;
break;
case PPC_OPROFILE_PA6T:
model = &op_model_pa6t;
break;
#endif
#ifdef CONFIG_6xx
case PPC_OPROFILE_G4:
model = &op_model_7450;
break;
#endif
#if defined(CONFIG_FSL_EMB_PERFMON)
case PPC_OPROFILE_FSL_EMB:
model = &op_model_fsl_emb;
break;
#endif
default:
return -ENODEV;
}
model->num_counters = cur_cpu_spec->num_pmcs;
ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
ops->create_files = op_powerpc_create_files;
ops->setup = op_powerpc_setup;
ops->shutdown = op_powerpc_shutdown;
ops->start = op_powerpc_start;
ops->stop = op_powerpc_stop;
ops->backtrace = op_powerpc_backtrace;
}
Notice the first
if (!cur_cpu_spec->oprofile_cpu_type)
return -ENODEV;
if (firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
For my e300c2 cpu both if's are false and I don't get support for callgraph/backtrace
support. Moving the ops->backtrace = op_powerpc_backtrace; to the top
enables backtrace for me.
This function needs fixing so its not all or nothing but I cannot make out
what is what so please, could someone look at this?
I am somewhat behind mainline so I will just use my hack for now.
Jocke
^ permalink raw reply
* AFDX Support in Linux
From: Vineeth @ 2011-11-17 8:00 UTC (permalink / raw)
To: linuxppc-dev, linux-embedded
[-- Attachment #1: Type: text/plain, Size: 89 bytes --]
Do we have AFDX support in Linux/Rt-Linux ?
tried grep.couldnt find any.
Thanks
Vineeth
[-- Attachment #2: Type: text/html, Size: 105 bytes --]
^ permalink raw reply
* [PATCH 28/29] powerpc/85xx: Rework P4080DS device trees
From: Kumar Gala @ 2011-11-17 7:16 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321514181-28897-27-git-send-email-galak@kernel.crashing.org>
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p4080-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
* Removed mpic interrupt-parent from sec nodes, just use top level
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 342 ++++++++++++
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 145 +++++
arch/powerpc/boot/dts/p4080ds.dts | 14 +-
arch/powerpc/boot/dts/p4080si.dtsi | 755 ---------------------------
4 files changed, 498 insertions(+), 758 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p4080si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 0000000..1510991
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,342 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ interrupts = <
+ 16 2 1 11 /* err_irq */
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0 /* bell_inb_irq */
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0 /* msg1_rx_irq */
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>; /* msg2_rx_irq */
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p4080-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 0000000..b353ac9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,145 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc..8ea1ae9 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -105,12 +108,12 @@
};
};
- rapidio0: rapidio@ffe0c0000 {
+ rio: rapidio0: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x20000>;
ranges = <0 0 0xc 0x20000000 0 0x01000000>;
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +135,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -147,6 +151,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -162,6 +167,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -174,3 +180,5 @@
};
};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01a..0000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P4080";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p4080-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p4080-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- voltage-ranges = <3300 3300>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p4080-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p4080-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio0: rapidio@ffe0c0000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
* [PATCH 26/29] powerpc/85xx: Rework P3041DS device tree
From: Kumar Gala @ 2011-11-17 7:16 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1321514181-28897-25-git-send-email-galak@kernel.crashing.org>
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p3041-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
* Fixed some dcsr compatiable typo's from 'p43041' to 'p3041'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 332 ++++++++++++
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 112 ++++
arch/powerpc/boot/dts/p3041ds.dts | 12 +-
arch/powerpc/boot/dts/p3041si.dtsi | 729 ---------------------------
4 files changed, 454 insertions(+), 731 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p3041si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 0000000..9cda481
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,332 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 0000000..136def3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b..1053d69 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +162,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -175,6 +178,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -190,6 +194,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -205,6 +210,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -216,3 +222,5 @@
};
};
};
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b7..0000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p3041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox