* [PATCH] sparsemem/bootmem: catch greater than section size allocations
From: Nishanth Aravamudan @ 2012-02-24 19:33 UTC (permalink / raw)
To: Andrew Morton
Cc: Anton Blanchard, Dave Hansen, linux-mm, Paul Mackerras,
Robert Jennings, linuxppc-dev
While testing AMS (Active Memory Sharing) / CMO (Cooperative Memory
Overcommit) on powerpc, we tripped the following:
kernel BUG at mm/bootmem.c:483!
cpu 0x0: Vector: 700 (Program Check) at [c000000000c03940]
pc: c000000000a62bd8: .alloc_bootmem_core+0x90/0x39c
lr: c000000000a64bcc: .sparse_early_usemaps_alloc_node+0x84/0x29c
sp: c000000000c03bc0
msr: 8000000000021032
current = 0xc000000000b0cce0
paca = 0xc000000001d80000
pid = 0, comm = swapper
kernel BUG at mm/bootmem.c:483!
enter ? for help
[c000000000c03c80] c000000000a64bcc
.sparse_early_usemaps_alloc_node+0x84/0x29c
[c000000000c03d50] c000000000a64f10 .sparse_init+0x12c/0x28c
[c000000000c03e20] c000000000a474f4 .setup_arch+0x20c/0x294
[c000000000c03ee0] c000000000a4079c .start_kernel+0xb4/0x460
[c000000000c03f90] c000000000009670 .start_here_common+0x1c/0x2c
This is
BUG_ON(limit && goal + size > limit);
and after some debugging, it seems that
goal = 0x7ffff000000
limit = 0x80000000000
and sparse_early_usemaps_alloc_node ->
sparse_early_usemaps_alloc_pgdat_section -> alloc_bootmem_section calls
return alloc_bootmem_section(usemap_size() * count, section_nr);
This is on a system with 8TB available via the AMS pool, and as a quirk
of AMS in firmware, all of that memory shows up in node 0. So, we end up
with an allocation that will fail the goal/limit constraints. In theory,
we could "fall-back" to alloc_bootmem_node() in
sparse_early_usemaps_alloc_node(), but since we actually have HOTREMOVE
defined, we'll BUG_ON() instead. A simple solution appears to be to
disable the limit check if the size of the allocation in
alloc_bootmem_secition exceeds the section size.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: linux-mm@kvack.org
Cc: linuxppc-dev@lists.ozlabs.org
---
include/linux/mmzone.h | 2 ++
mm/bootmem.c | 5 ++++-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 650ba2f..4176834 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -967,6 +967,8 @@ static inline unsigned long early_pfn_to_nid(unsigned long pfn)
* PA_SECTION_SHIFT physical address to/from section number
* PFN_SECTION_SHIFT pfn to/from section number
*/
+#define BYTES_PER_SECTION (1UL << SECTION_SIZE_BITS)
+
#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
#define PA_SECTION_SHIFT (SECTION_SIZE_BITS)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 668e94d..5cbbc76 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -770,7 +770,10 @@ void * __init alloc_bootmem_section(unsigned long size,
pfn = section_nr_to_pfn(section_nr);
goal = pfn << PAGE_SHIFT;
- limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
+ if (size > BYTES_PER_SECTION)
+ limit = 0;
+ else
+ limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
bdata = &bootmem_node_data[early_pfn_to_nid(pfn)];
return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, limit);
--
1.7.5.4
^ permalink raw reply related
* Re: [PATCH 00/14] DMA-mapping framework redesign preparation
From: Arnd Bergmann @ 2012-02-24 15:48 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-arch, Stephen Rothwell, linux-alpha, linux-ia64,
Jonathan Corbet, linux-sh, x86, Andrzej Pietrasiewicz,
linux-kernel, linaro-mm-sig, linux-mm, Kyungmin Park, linux-mips,
microblaze-uclinux, sparclinux, Thomas Gleixner, linuxppc-dev,
Andrew Morton, linux-arm-kernel, discuss
In-Reply-To: <1324643253-3024-1-git-send-email-m.szyprowski@samsung.com>
On Friday 23 December 2011, Marek Szyprowski wrote:
> The solution we found is to introduce a new public dma mapping functions
> with additional attributes argument: dma_alloc_attrs and
> dma_free_attrs(). This way all different kinds of architecture specific
> buffer mappings can be hidden behind the attributes without the need of
> creating several versions of dma_alloc_ function.
Since the patches are now in linux-next, we should make sure that they
can actually get merged into 3.4.
I've looked at all the patches again and found them to be straightforward
and helpful, I hope we can get them merged next time. Please add my
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply
* [PATCH 37/37] KVM: PPC: booke: Reinject performance monitor interrupts
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When we get a performance monitor interrupt, we need to make sure that
the host receives it. So reinject it like we reinject the other host
destined interrupts.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/include/asm/hw_irq.h | 1 +
arch/powerpc/kvm/booke.c | 3 +++
2 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index bb712c9..904e66c 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -12,6 +12,7 @@
#include <asm/processor.h>
extern void timer_interrupt(struct pt_regs *);
+extern void performance_monitor_exception(struct pt_regs *regs);
#ifdef CONFIG_PPC64
#include <asm/paca.h>
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 709fd45..c391357 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -630,6 +630,9 @@ static void kvmppc_restart_interrupt(struct kvm_vcpu *vcpu,
case BOOKE_INTERRUPT_MACHINE_CHECK:
/* FIXME */
break;
+ case BOOKE_INTERRUPT_PERFORMANCE_MONITOR:
+ performance_monitor_exception(®s);
+ break;
}
}
--
1.6.0.2
^ permalink raw reply related
* [PATCH 36/37] KVM: PPC: booke: expose guest registers on irq reinject
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When reinjecting an interrupt into the host interrupt handler after we're
back in host kernel land, let's tell the kernel about all the guest state
that the interrupt happened at.
This helps getting reasonable numbers out of perf.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 54 +++++++++++++++++++++++++++++++++------------
1 files changed, 39 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 423701b..709fd45 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -593,37 +593,61 @@ static int emulation_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
}
}
-/**
- * kvmppc_handle_exit
- *
- * Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV)
- */
-int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
- unsigned int exit_nr)
+static void kvmppc_fill_pt_regs(struct kvm_vcpu *vcpu, struct pt_regs *regs)
{
- int r = RESUME_HOST;
+ int i;
- /* update before a new last_exit_type is rewritten */
- kvmppc_update_timing_stats(vcpu);
+ for (i = 0; i < 32; i++)
+ regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
+ regs->nip = vcpu->arch.pc;
+ regs->msr = vcpu->arch.shared->msr;
+ regs->ctr = vcpu->arch.ctr;
+ regs->link = vcpu->arch.lr;
+ regs->xer = kvmppc_get_xer(vcpu);
+ regs->ccr = kvmppc_get_cr(vcpu);
+ regs->dar = get_guest_dear(vcpu);
+ regs->dsisr = get_guest_esr(vcpu);
+}
+
+static void kvmppc_restart_interrupt(struct kvm_vcpu *vcpu,
+ unsigned int exit_nr)
+{
+ struct pt_regs regs = *current->thread.regs;
+ kvmppc_fill_pt_regs(vcpu, ®s);
switch (exit_nr) {
case BOOKE_INTERRUPT_EXTERNAL:
- do_IRQ(current->thread.regs);
+ do_IRQ(®s);
break;
-
case BOOKE_INTERRUPT_DECREMENTER:
- timer_interrupt(current->thread.regs);
+ timer_interrupt(®s);
break;
-
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3E_64)
case BOOKE_INTERRUPT_DOORBELL:
- doorbell_exception(current->thread.regs);
+ doorbell_exception(®s);
break;
#endif
case BOOKE_INTERRUPT_MACHINE_CHECK:
/* FIXME */
break;
}
+}
+
+/**
+ * kvmppc_handle_exit
+ *
+ * Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV)
+ */
+int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ unsigned int exit_nr)
+{
+ int r = RESUME_HOST;
+
+ /* update before a new last_exit_type is rewritten */
+ kvmppc_update_timing_stats(vcpu);
+
+ /* restart interrupts if they were meant for the host */
+ kvmppc_restart_interrupt(vcpu, exit_nr);
local_irq_enable();
--
1.6.0.2
^ permalink raw reply related
* [PATCH 35/37] KVM: PPC: booke: Support perfmon interrupts
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When during guest context we get a performance monitor interrupt, we
currently bail out and oops. Let's route it to its correct handler
instead.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 7adef28..423701b 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -677,6 +677,10 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
r = RESUME_GUEST;
break;
+ case BOOKE_INTERRUPT_PERFORMANCE_MONITOR:
+ r = RESUME_GUEST;
+ break;
+
case BOOKE_INTERRUPT_HV_PRIV:
r = emulation_exit(run, vcpu);
break;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 33/37] KVM: PPC: bookehv: remove unused code
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
There was some unused code in the exit code path that must have been
a leftover from earlier iterations. While it did no hard, it's superfluous
and thus should be removed.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 021d087..b1c099b 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -112,9 +112,6 @@
* appropriate for the exception type).
*/
cmpw r6, r8
- .if \flags & NEED_EMU
- lwz r9, KVM_LPID(r9)
- .endif
beq 1f
mfmsr r7
.if \srr0 != SPRN_MCSRR0 && \srr0 != SPRN_CSRR0
--
1.6.0.2
^ permalink raw reply related
* [PATCH 34/37] KVM: PPC: e500: fix typo in tlb code
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The tlbncfg registers should be populated with their respective TLB's
values. Fix the obvious typo.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/e500_tlb.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 279e10a..e05232b 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -1268,8 +1268,8 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500)
vcpu->arch.tlbcfg[1] = mfspr(SPRN_TLB1CFG) &
~(TLBnCFG_N_ENTRY | TLBnCFG_ASSOC);
- vcpu->arch.tlbcfg[0] |= vcpu_e500->gtlb_params[1].entries;
- vcpu->arch.tlbcfg[0] |=
+ vcpu->arch.tlbcfg[1] |= vcpu_e500->gtlb_params[1].entries;
+ vcpu->arch.tlbcfg[1] |=
vcpu_e500->gtlb_params[1].ways << TLBnCFG_ASSOC_SHIFT;
return 0;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 27/37] KVM: PPC: bookehv: remove negation for CONFIG_64BIT
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
Instead if doing
#ifndef CONFIG_64BIT
...
#else
...
#endif
we should rather do
#ifdef CONFIG_64BIT
...
#else
...
#endif
which is a lot easier to read. Change the bookehv implementation to
stick with this rule.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 24 ++++++++++++------------
1 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 215381e..c5a0796 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -99,10 +99,10 @@
.endif
oris r8, r6, MSR_CE@h
-#ifndef CONFIG_64BIT
- stw r6, (VCPU_SHARED_MSR + 4)(r11)
-#else
+#ifdef CONFIG_64BIT
std r6, (VCPU_SHARED_MSR)(r11)
+#else
+ stw r6, (VCPU_SHARED_MSR + 4)(r11)
#endif
ori r8, r8, MSR_ME | MSR_RI
PPC_STL r5, VCPU_PC(r4)
@@ -344,10 +344,10 @@ _GLOBAL(kvmppc_resume_host)
stw r5, VCPU_SHARED_MAS0(r11)
mfspr r7, SPRN_MAS2
stw r6, VCPU_SHARED_MAS1(r11)
-#ifndef CONFIG_64BIT
- stw r7, (VCPU_SHARED_MAS2 + 4)(r11)
-#else
+#ifdef CONFIG_64BIT
std r7, (VCPU_SHARED_MAS2)(r11)
+#else
+ stw r7, (VCPU_SHARED_MAS2 + 4)(r11)
#endif
mfspr r5, SPRN_MAS3
mfspr r6, SPRN_MAS4
@@ -530,10 +530,10 @@ lightweight_exit:
stw r3, VCPU_HOST_MAS6(r4)
lwz r3, VCPU_SHARED_MAS0(r11)
lwz r5, VCPU_SHARED_MAS1(r11)
-#ifndef CONFIG_64BIT
- lwz r6, (VCPU_SHARED_MAS2 + 4)(r11)
-#else
+#ifdef CONFIG_64BIT
ld r6, (VCPU_SHARED_MAS2)(r11)
+#else
+ lwz r6, (VCPU_SHARED_MAS2 + 4)(r11)
#endif
lwz r7, VCPU_SHARED_MAS7_3+4(r11)
lwz r8, VCPU_SHARED_MAS4(r11)
@@ -572,10 +572,10 @@ lightweight_exit:
PPC_LL r6, VCPU_CTR(r4)
PPC_LL r7, VCPU_CR(r4)
PPC_LL r8, VCPU_PC(r4)
-#ifndef CONFIG_64BIT
- lwz r9, (VCPU_SHARED_MSR + 4)(r11)
-#else
+#ifdef CONFIG_64BIT
ld r9, (VCPU_SHARED_MSR)(r11)
+#else
+ lwz r9, (VCPU_SHARED_MSR + 4)(r11)
#endif
PPC_LL r0, VCPU_GPR(r0)(r4)
PPC_LL r1, VCPU_GPR(r1)(r4)
--
1.6.0.2
^ permalink raw reply related
* [PATCH 29/37] KVM: PPC: bookehv: disable MAS register updates early
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
We need to make sure that no MAS updates happen automatically while we
have the guest MAS registers loaded. So move the disabling code a bit
higher up so that it covers the full time we have guest values in MAS
registers.
The race this patch fixes should never occur, but it makes the code a
bit more logical to do it this way around.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 469bd3f..021d087 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -358,6 +358,7 @@ _GLOBAL(kvmppc_resume_host)
mtspr SPRN_MAS4, r6
stw r5, VCPU_SHARED_MAS7_3+0(r11)
mtspr SPRN_MAS6, r8
+ /* Enable MAS register updates via exception */
mfspr r3, SPRN_EPCR
rlwinm r3, r3, 0, ~SPRN_EPCR_DMIUH
mtspr SPRN_EPCR, r3
@@ -515,6 +516,11 @@ lightweight_exit:
mtspr SPRN_PID, r3
PPC_LL r11, VCPU_SHARED(r4)
+ /* Disable MAS register updates via exception */
+ mfspr r3, SPRN_EPCR
+ oris r3, r3, SPRN_EPCR_DMIUH@h
+ mtspr SPRN_EPCR, r3
+ isync
/* Save host mas4 and mas6 and load guest MAS registers */
mfspr r3, SPRN_MAS4
stw r3, VCPU_HOST_MAS4(r4)
@@ -538,10 +544,6 @@ lightweight_exit:
lwz r5, VCPU_SHARED_MAS7_3+0(r11)
mtspr SPRN_MAS6, r3
mtspr SPRN_MAS7, r5
- /* Disable MAS register updates via exception */
- mfspr r3, SPRN_EPCR
- oris r3, r3, SPRN_EPCR_DMIUH@h
- mtspr SPRN_EPCR, r3
/*
* Host interrupt handlers may have clobbered these guest-readable
--
1.6.0.2
^ permalink raw reply related
* [PATCH 32/37] KVM: PPC: booke: add GS documentation for program interrupt
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The comment for program interrupts triggered when using bookehv was
misleading. Update it to mention why MSR_GS indicates that we have
to inject an interrupt into the guest again, not emulate it.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 451ba16..7adef28 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -683,8 +683,14 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
case BOOKE_INTERRUPT_PROGRAM:
if (vcpu->arch.shared->msr & (MSR_PR | MSR_GS)) {
- /* Program traps generated by user-level software must be handled
- * by the guest kernel. */
+ /*
+ * Program traps generated by user-level software must
+ * be handled by the guest kernel.
+ *
+ * In GS mode, hypervisor privileged instructions trap
+ * on BOOKE_INTERRUPT_HV_PRIV, not here, so these are
+ * actual program interrupts, handled by the guest.
+ */
kvmppc_core_queue_program(vcpu, vcpu->arch.fault_esr);
r = RESUME_GUEST;
kvmppc_account_exit(vcpu, USR_PR_INST);
--
1.6.0.2
^ permalink raw reply related
* [PATCH 31/37] KVM: PPC: booke: Readd debug abort code for machine check
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When during guest execution we get a machine check interrupt, we don't
know how to handle it yet. So let's add the error printing code back
again that we dropped accidently earlier and tell user space that something
went really wrong.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 288bc05..451ba16 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -632,7 +632,12 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
switch (exit_nr) {
case BOOKE_INTERRUPT_MACHINE_CHECK:
- r = RESUME_GUEST;
+ printk("MACHINE CHECK: %lx\n", mfspr(SPRN_MCSR));
+ kvmppc_dump_vcpu(vcpu);
+ /* For debugging, send invalid exit reason to user space */
+ run->hw.hardware_exit_reason = ~1ULL << 32;
+ run->hw.hardware_exit_reason |= mfspr(SPRN_MCSR);
+ r = RESUME_HOST;
break;
case BOOKE_INTERRUPT_EXTERNAL:
--
1.6.0.2
^ permalink raw reply related
* [PATCH 30/37] KVM: PPC: bookehv: add comment about shadow_msr
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
For BookE HV the guest visible MSR is shared->msr and is identical to
the MSR that is in use while the guest is running, because we can't trap
reads from/to MSR.
So shadow_msr is unused there. Indicate that with a comment.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/include/asm/kvm_host.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index ed95f53..633d68f 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -386,6 +386,7 @@ struct kvm_vcpu_arch {
#endif
u32 vrsave; /* also USPRG0 */
u32 mmucr;
+ /* shadow_msr is unused for BookE HV */
ulong shadow_msr;
ulong csrr0;
ulong csrr1;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 25/37] KVM: PPC: booke: BOOKE_IRQPRIO_MAX is n+1
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The semantics of BOOKE_IRQPRIO_MAX changed to denote the highest available
irqprio + 1, so let's reflect that in the code too.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 3fcec2c..288bc05 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -425,7 +425,7 @@ static void kvmppc_core_check_exceptions(struct kvm_vcpu *vcpu)
}
priority = __ffs(*pending);
- while (priority <= BOOKE_IRQPRIO_MAX) {
+ while (priority < BOOKE_IRQPRIO_MAX) {
if (kvmppc_booke_irqprio_deliver(vcpu, priority))
break;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 28/37] KVM: PPC: bookehv: remove SET_VCPU
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The SET_VCPU macro is a leftover from times when the vcpu struct wasn't
stored in the thread on vcpu_load/put. It's not needed anymore. Remove it.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index c5a0796..469bd3f 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -35,9 +35,6 @@
#define GET_VCPU(vcpu, thread) \
PPC_LL vcpu, THREAD_KVM_VCPU(thread)
-#define SET_VCPU(vcpu) \
- PPC_STL vcpu, (THREAD + THREAD_KVM_VCPU)(r2)
-
#define LONGBYTES (BITS_PER_LONG / 8)
#define VCPU_GPR(n) (VCPU_GPRS + (n * LONGBYTES))
@@ -517,11 +514,6 @@ lightweight_exit:
lwz r3, VCPU_GUEST_PID(r4)
mtspr SPRN_PID, r3
- /* Save vcpu pointer for the exception handlers
- * must be done before loading guest r2.
- */
-// SET_VCPU(r4)
-
PPC_LL r11, VCPU_SHARED(r4)
/* Save host mas4 and mas6 and load guest MAS registers */
mfspr r3, SPRN_MAS4
--
1.6.0.2
^ permalink raw reply related
* [PATCH 26/37] KVM: PPC: bookehv: fix exit timing
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When using exit timing stats, we clobber r9 in the NEED_EMU case,
so better move that part down a few lines and fix it that way.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index f7dc3f6..215381e 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -83,10 +83,6 @@
stw r10, VCPU_GUEST_PID(r4)
mtspr SPRN_PID, r8
- .if \flags & NEED_EMU
- lwz r9, VCPU_KVM(r4)
- .endif
-
#ifdef CONFIG_KVM_EXIT_TIMING
/* save exit time */
1: mfspr r7, SPRN_TBRU
@@ -98,6 +94,10 @@
PPC_STL r9, VCPU_TIMING_EXIT_TBU(r4)
#endif
+ .if \flags & NEED_EMU
+ lwz r9, VCPU_KVM(r4)
+ .endif
+
oris r8, r6, MSR_CE@h
#ifndef CONFIG_64BIT
stw r6, (VCPU_SHARED_MSR + 4)(r11)
--
1.6.0.2
^ permalink raw reply related
* [PATCH 24/37] KVM: PPC: booke: rework rescheduling checks
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
Instead of checking whether we should reschedule only when we exited
due to an interrupt, let's always check before entering the guest back
again. This gets the target more in line with the other archs.
Also while at it, generalize the whole thing so that eventually we could
have a single kvmppc_prepare_to_enter function for all ppc targets that
does signal and reschedule checking for us.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/include/asm/kvm_ppc.h | 2 +-
arch/powerpc/kvm/book3s.c | 4 ++-
arch/powerpc/kvm/booke.c | 70 ++++++++++++++++++++++++-----------
3 files changed, 52 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index e709975..7f0a3da 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -95,7 +95,7 @@ extern int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu,
extern void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu);
-extern void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu);
+extern int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu);
extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong flags);
extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu);
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 7d54f4e..c8ead7b 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -258,7 +258,7 @@ static bool clear_irqprio(struct kvm_vcpu *vcpu, unsigned int priority)
return true;
}
-void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
+int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
{
unsigned long *pending = &vcpu->arch.pending_exceptions;
unsigned long old_pending = vcpu->arch.pending_exceptions;
@@ -283,6 +283,8 @@ void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
/* Tell the guest about our interrupt status */
kvmppc_update_int_pending(vcpu, *pending, old_pending);
+
+ return 0;
}
pfn_t kvmppc_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 9979be1..3fcec2c 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -439,8 +439,9 @@ static void kvmppc_core_check_exceptions(struct kvm_vcpu *vcpu)
}
/* Check pending exceptions and deliver one, if possible. */
-void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
+int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
{
+ int r = 0;
WARN_ON_ONCE(!irqs_disabled());
kvmppc_core_check_exceptions(vcpu);
@@ -451,8 +452,44 @@ void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
local_irq_disable();
kvmppc_set_exit_type(vcpu, EMULATED_MTMSRWE_EXITS);
- kvmppc_core_check_exceptions(vcpu);
+ r = 1;
};
+
+ return r;
+}
+
+/*
+ * Common checks before entering the guest world. Call with interrupts
+ * disabled.
+ *
+ * returns !0 if a signal is pending and check_signal is true
+ */
+static int kvmppc_prepare_to_enter(struct kvm_vcpu *vcpu, bool check_signal)
+{
+ int r = 0;
+
+ WARN_ON_ONCE(!irqs_disabled());
+ while (true) {
+ if (need_resched()) {
+ local_irq_enable();
+ cond_resched();
+ local_irq_disable();
+ continue;
+ }
+
+ if (kvmppc_core_prepare_to_enter(vcpu)) {
+ /* interrupts got enabled in between, so we
+ are back at square 1 */
+ continue;
+ }
+
+ if (check_signal && signal_pending(current))
+ r = 1;
+
+ break;
+ }
+
+ return r;
}
int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
@@ -470,10 +507,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
}
local_irq_disable();
-
- kvmppc_core_prepare_to_enter(vcpu);
-
- if (signal_pending(current)) {
+ if (kvmppc_prepare_to_enter(vcpu, true)) {
kvm_run->exit_reason = KVM_EXIT_INTR;
ret = -EINTR;
goto out;
@@ -598,25 +632,21 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
switch (exit_nr) {
case BOOKE_INTERRUPT_MACHINE_CHECK:
- kvm_resched(vcpu);
r = RESUME_GUEST;
break;
case BOOKE_INTERRUPT_EXTERNAL:
kvmppc_account_exit(vcpu, EXT_INTR_EXITS);
- kvm_resched(vcpu);
r = RESUME_GUEST;
break;
case BOOKE_INTERRUPT_DECREMENTER:
kvmppc_account_exit(vcpu, DEC_EXITS);
- kvm_resched(vcpu);
r = RESUME_GUEST;
break;
case BOOKE_INTERRUPT_DOORBELL:
kvmppc_account_exit(vcpu, DBELL_EXITS);
- kvm_resched(vcpu);
r = RESUME_GUEST;
break;
@@ -865,19 +895,15 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
BUG();
}
+ /*
+ * To avoid clobbering exit_reason, only check for signals if we
+ * aren't already exiting to userspace for some other reason.
+ */
local_irq_disable();
-
- kvmppc_core_prepare_to_enter(vcpu);
-
- if (!(r & RESUME_HOST)) {
- /* To avoid clobbering exit_reason, only check for signals if
- * we aren't already exiting to userspace for some other
- * reason. */
- if (signal_pending(current)) {
- run->exit_reason = KVM_EXIT_INTR;
- r = (-EINTR << 2) | RESUME_HOST | (r & RESUME_FLAG_NV);
- kvmppc_account_exit(vcpu, SIGNAL_EXITS);
- }
+ if (kvmppc_prepare_to_enter(vcpu, !(r & RESUME_HOST))) {
+ run->exit_reason = KVM_EXIT_INTR;
+ r = (-EINTR << 2) | RESUME_HOST | (r & RESUME_FLAG_NV);
+ kvmppc_account_exit(vcpu, SIGNAL_EXITS);
}
return r;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 20/37] KVM: PPC: rename CONFIG_KVM_E500 -> CONFIG_KVM_E500V2
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The CONFIG_KVM_E500 option really indicates that we're running on a V2 machine,
not on a machine of the generic E500 class. So indicate that properly and
change the config name accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/Kconfig | 8 ++++----
arch/powerpc/kvm/Makefile | 4 ++--
arch/powerpc/kvm/booke.c | 2 +-
arch/powerpc/kvm/e500.h | 6 +++---
arch/powerpc/kvm/e500_tlb.c | 2 +-
arch/powerpc/kvm/powerpc.c | 8 ++++----
6 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 58f6e68..44a998d 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -109,7 +109,7 @@ config KVM_440
config KVM_EXIT_TIMING
bool "Detailed exit timing"
- depends on KVM_440 || KVM_E500 || KVM_E500MC
+ depends on KVM_440 || KVM_E500V2 || KVM_E500MC
---help---
Calculate elapsed time for every exit/enter cycle. A per-vcpu
report is available in debugfs kvm/vm#_vcpu#_timing.
@@ -118,14 +118,14 @@ config KVM_EXIT_TIMING
If unsure, say N.
-config KVM_E500
- bool "KVM support for PowerPC E500 processors"
+config KVM_E500V2
+ bool "KVM support for PowerPC E500v2 processors"
depends on EXPERIMENTAL && E500
select KVM
select KVM_MMIO
---help---
Support running unmodified E500 guest kernels in virtual machines on
- E500 host processors.
+ E500v2 host processors.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 62febd7..25225ae 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -36,7 +36,7 @@ kvm-e500-objs := \
e500.o \
e500_tlb.o \
e500_emulate.o
-kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
+kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs)
kvm-e500mc-objs := \
$(common-objs-y) \
@@ -98,7 +98,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
obj-$(CONFIG_KVM_440) += kvm.o
-obj-$(CONFIG_KVM_E500) += kvm.o
+obj-$(CONFIG_KVM_E500V2) += kvm.o
obj-$(CONFIG_KVM_E500MC) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index fcbe928..9fcc760 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -762,7 +762,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
gpa_t gpaddr;
gfn_t gfn;
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
if (!(vcpu->arch.shared->msr & MSR_PR) &&
(eaddr & PAGE_MASK) == vcpu->arch.magic_page_ea) {
kvmppc_map_magic(vcpu);
diff --git a/arch/powerpc/kvm/e500.h b/arch/powerpc/kvm/e500.h
index 3143085..7967f3f 100644
--- a/arch/powerpc/kvm/e500.h
+++ b/arch/powerpc/kvm/e500.h
@@ -39,7 +39,7 @@ struct tlbe_priv {
struct tlbe_ref ref; /* TLB0 only -- TLB1 uses tlb_refs */
};
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
struct vcpu_id_table;
#endif
@@ -89,7 +89,7 @@ struct kvmppc_vcpu_e500 {
u64 *g2h_tlb1_map;
unsigned int *h2g_tlb1_rmap;
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
u32 pid[E500_PID_NUM];
/* vcpu id table */
@@ -136,7 +136,7 @@ void kvmppc_get_sregs_e500_tlb(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs);
int kvmppc_set_sregs_e500_tlb(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs);
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
unsigned int kvmppc_e500_get_sid(struct kvmppc_vcpu_e500 *vcpu_e500,
unsigned int as, unsigned int gid,
unsigned int pr, int avoid_recursion);
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index e232bb4..279e10a 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -156,7 +156,7 @@ static inline void write_host_tlbe(struct kvmppc_vcpu_e500 *vcpu_e500,
}
}
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
void kvmppc_map_magic(struct kvm_vcpu *vcpu)
{
struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 58a084f..26c6a8d 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -74,7 +74,7 @@ int kvmppc_kvm_pv(struct kvm_vcpu *vcpu)
}
case HC_VENDOR_KVM | KVM_HC_FEATURES:
r = HC_EV_SUCCESS;
-#if defined(CONFIG_PPC_BOOK3S) || defined(CONFIG_KVM_E500)
+#if defined(CONFIG_PPC_BOOK3S) || defined(CONFIG_KVM_E500V2)
/* XXX Missing magic page on 44x */
r2 |= (1 << KVM_FEATURE_MAGIC_PAGE);
#endif
@@ -230,7 +230,7 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_PPC_PAIRED_SINGLES:
case KVM_CAP_PPC_OSI:
case KVM_CAP_PPC_GET_PVINFO:
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB:
#endif
r = 1;
@@ -638,7 +638,7 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
r = 0;
vcpu->arch.papr_enabled = true;
break;
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB: {
struct kvm_config_tlb cfg;
void __user *user_ptr = (void __user *)(uintptr_t)cap->args[0];
@@ -715,7 +715,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
break;
}
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_DIRTY_TLB: {
struct kvm_dirty_tlb dirty;
r = -EFAULT;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 23/37] KVM: PPC: booke: deliver program int on emulation failure
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When we fail to emulate an instruction for the guest, we better go in and
tell it that we failed to emulate it, by throwing an illegal instruction
exception.
Please beware that we basically never get around to telling the guest that
we failed thanks to the debugging code right above it. If user space however
decides that it wants to ignore the debug, we would at least do "the right
thing" afterwards.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 17d5318..9979be1 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -545,13 +545,13 @@ static int emulation_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
return RESUME_HOST;
case EMULATE_FAIL:
- /* XXX Deliver Program interrupt to guest. */
printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
__func__, vcpu->arch.pc, vcpu->arch.last_inst);
/* For debugging, encode the failing instruction and
* report it to userspace. */
run->hw.hardware_exit_reason = ~0ULL << 32;
run->hw.hardware_exit_reason |= vcpu->arch.last_inst;
+ kvmppc_core_queue_program(vcpu, ESR_PIL);
return RESUME_HOST;
default:
--
1.6.0.2
^ permalink raw reply related
* [PATCH 19/37] KVM: PPC: e500mc: add load inst fixup
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
There's always a chance we're unable to read a guest instruction. The guest
could have its TLB mapped execute-, but not readable, something odd happens
and our TLB gets flushed. So it's a good idea to be prepared for that case
and have a fallback that allows us to fix things up in that case.
Add fixup code that keeps guest code from potentially crashing our host kernel.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- fix whitespace
- use explicit preempt counts
---
arch/powerpc/kvm/bookehv_interrupts.S | 30 +++++++++++++++++++++++++++++-
1 files changed, 29 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 63023ae..f7dc3f6 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -28,6 +28,7 @@
#include <asm/asm-compat.h>
#include <asm/asm-offsets.h>
#include <asm/bitsperlong.h>
+#include <asm/thread_info.h>
#include "../kernel/head_booke.h" /* for THREAD_NORMSAVE() */
@@ -171,9 +172,36 @@
PPC_STL r30, VCPU_GPR(r30)(r4)
PPC_STL r31, VCPU_GPR(r31)(r4)
mtspr SPRN_EPLC, r8
+
+ /* disable preemption, so we are sure we hit the fixup handler */
+#ifdef CONFIG_PPC64
+ clrrdi r8,r1,THREAD_SHIFT
+#else
+ rlwinm r8,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+#endif
+ li r7, 1
+ stw r7, TI_PREEMPT(r8)
+
isync
- lwepx r9, 0, r5
+
+ /*
+ * In case the read goes wrong, we catch it and write an invalid value
+ * in LAST_INST instead.
+ */
+1: lwepx r9, 0, r5
+2:
+.section .fixup, "ax"
+3: li r9, KVM_INST_FETCH_FAILED
+ b 2b
+.previous
+.section __ex_table,"a"
+ PPC_LONG_ALIGN
+ PPC_LONG 1b,3b
+.previous
+
mtspr SPRN_EPLC, r3
+ li r7, 0
+ stw r7, TI_PREEMPT(r8)
stw r9, VCPU_LAST_INST(r4)
.endif
--
1.6.0.2
^ permalink raw reply related
* [PATCH 21/37] KVM: PPC: make e500v2 kvm and e500mc cpu mutually exclusive
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
We can't run e500v2 kvm on e500mc kernels, so indicate that by
making the 2 options mutually exclusive in kconfig.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 44a998d..f4dacb9 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -120,7 +120,7 @@ config KVM_EXIT_TIMING
config KVM_E500V2
bool "KVM support for PowerPC E500v2 processors"
- depends on EXPERIMENTAL && E500
+ depends on EXPERIMENTAL && E500 && !PPC_E500MC
select KVM
select KVM_MMIO
---help---
--
1.6.0.2
^ permalink raw reply related
* [PATCH 22/37] KVM: PPC: booke: remove leftover debugging
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
The e500mc patches left some debug code in that we don't need. Remove it.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 5 -----
1 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 9fcc760..17d5318 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -469,11 +469,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
return -EINVAL;
}
- if (!current->thread.kvm_vcpu) {
- WARN(1, "no vcpu\n");
- return -EPERM;
- }
-
local_irq_disable();
kvmppc_core_prepare_to_enter(vcpu);
--
1.6.0.2
^ permalink raw reply related
* [PATCH 14/37] KVM: PPC: booke: standard PPC floating point support
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
From: Scott Wood <scottwood@freescale.com>
e500mc has a normal PPC FPU, rather than SPE which is found
on e500v1/v2.
Based on code from Liu Yu <yu.liu@freescale.com>.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/include/asm/system.h | 1 +
arch/powerpc/kvm/booke.c | 44 +++++++++++++++++++++++++++++++++++++
arch/powerpc/kvm/booke.h | 30 +++++++++++++++++++++++++
3 files changed, 75 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index c377457..73eee86 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -140,6 +140,7 @@ extern void via_cuda_init(void);
extern void read_rtc_time(void);
extern void pmac_find_display(void);
extern void giveup_fpu(struct task_struct *);
+extern void load_up_fpu(void);
extern void disable_kernel_fp(void);
extern void enable_kernel_fp(void);
extern void flush_fp_to_thread(struct task_struct *);
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 75dbaeb..0b77be1 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -457,6 +457,11 @@ void kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
{
int ret;
+#ifdef CONFIG_PPC_FPU
+ unsigned int fpscr;
+ int fpexc_mode;
+ u64 fpr[32];
+#endif
if (!vcpu->arch.sane) {
kvm_run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
@@ -479,7 +484,46 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
}
kvm_guest_enter();
+
+#ifdef CONFIG_PPC_FPU
+ /* Save userspace FPU state in stack */
+ enable_kernel_fp();
+ memcpy(fpr, current->thread.fpr, sizeof(current->thread.fpr));
+ fpscr = current->thread.fpscr.val;
+ fpexc_mode = current->thread.fpexc_mode;
+
+ /* Restore guest FPU state to thread */
+ memcpy(current->thread.fpr, vcpu->arch.fpr, sizeof(vcpu->arch.fpr));
+ current->thread.fpscr.val = vcpu->arch.fpscr;
+
+ /*
+ * Since we can't trap on MSR_FP in GS-mode, we consider the guest
+ * as always using the FPU. Kernel usage of FP (via
+ * enable_kernel_fp()) in this thread must not occur while
+ * vcpu->fpu_active is set.
+ */
+ vcpu->fpu_active = 1;
+
+ kvmppc_load_guest_fp(vcpu);
+#endif
+
ret = __kvmppc_vcpu_run(kvm_run, vcpu);
+
+#ifdef CONFIG_PPC_FPU
+ kvmppc_save_guest_fp(vcpu);
+
+ vcpu->fpu_active = 0;
+
+ /* Save guest FPU state from thread */
+ memcpy(vcpu->arch.fpr, current->thread.fpr, sizeof(vcpu->arch.fpr));
+ vcpu->arch.fpscr = current->thread.fpscr.val;
+
+ /* Restore userspace FPU state from stack */
+ memcpy(current->thread.fpr, fpr, sizeof(current->thread.fpr));
+ current->thread.fpscr.val = fpscr;
+ current->thread.fpexc_mode = fpexc_mode;
+#endif
+
kvm_guest_exit();
out:
diff --git a/arch/powerpc/kvm/booke.h b/arch/powerpc/kvm/booke.h
index d53bcf2..3bf5eda 100644
--- a/arch/powerpc/kvm/booke.h
+++ b/arch/powerpc/kvm/booke.h
@@ -96,4 +96,34 @@ enum int_class {
void kvmppc_set_pending_interrupt(struct kvm_vcpu *vcpu, enum int_class type);
+/*
+ * Load up guest vcpu FP state if it's needed.
+ * It also set the MSR_FP in thread so that host know
+ * we're holding FPU, and then host can help to save
+ * guest vcpu FP state if other threads require to use FPU.
+ * This simulates an FP unavailable fault.
+ *
+ * It requires to be called with preemption disabled.
+ */
+static inline void kvmppc_load_guest_fp(struct kvm_vcpu *vcpu)
+{
+#ifdef CONFIG_PPC_FPU
+ if (vcpu->fpu_active && !(current->thread.regs->msr & MSR_FP)) {
+ load_up_fpu();
+ current->thread.regs->msr |= MSR_FP;
+ }
+#endif
+}
+
+/*
+ * Save guest vcpu FP state into thread.
+ * It requires to be called with preemption disabled.
+ */
+static inline void kvmppc_save_guest_fp(struct kvm_vcpu *vcpu)
+{
+#ifdef CONFIG_PPC_FPU
+ if (vcpu->fpu_active && (current->thread.regs->msr & MSR_FP))
+ giveup_fpu(current);
+#endif
+}
#endif /* __KVM_BOOKE_H__ */
--
1.6.0.2
^ permalink raw reply related
* [PATCH 16/37] KVM: PPC: e500mc: Add doorbell emulation support
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When one vcpu wants to kick another, it can issue a special IPI instruction
called msgsnd. This patch emulates this instruction, its clearing counterpart
and the infrastructure required to actually trigger that interrupt inside
a guest vcpu.
With this patch, SMP guests on e500mc work.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- introduce and use constants
- drop e500mc ifdefs
---
arch/powerpc/include/asm/dbell.h | 2 +
arch/powerpc/kvm/booke.c | 2 +
arch/powerpc/kvm/e500_emulate.c | 68 ++++++++++++++++++++++++++++++++++++++
3 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index d7365b0..154c067 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -19,7 +19,9 @@
#define PPC_DBELL_MSG_BRDCAST (0x04000000)
#define PPC_DBELL_TYPE(x) (((x) & 0xf) << (63-36))
+#define PPC_DBELL_TYPE_MASK PPC_DBELL_TYPE(0xf)
#define PPC_DBELL_LPID(x) ((x) << (63 - 49))
+#define PPC_DBELL_PIR_MASK 0x3fff
enum ppc_dbell {
PPC_DBELL = 0, /* doorbell */
PPC_DBELL_CRIT = 1, /* critical doorbell */
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 0b77be1..85bd5b8 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -326,6 +326,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
int_class = INT_CLASS_NONCRIT;
break;
case BOOKE_IRQPRIO_CRITICAL:
+ case BOOKE_IRQPRIO_DBELL_CRIT:
allowed = vcpu->arch.shared->msr & MSR_CE;
allowed = allowed && !crit;
msr_mask = MSR_GS | MSR_ME;
@@ -342,6 +343,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
keep_irq = true;
/* fall through */
case BOOKE_IRQPRIO_EXTERNAL:
+ case BOOKE_IRQPRIO_DBELL:
allowed = vcpu->arch.shared->msr & MSR_EE;
allowed = allowed && !crit;
msr_mask = MSR_GS | MSR_CE | MSR_ME | MSR_DE;
diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index 98b6c1c..99155f8 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -14,16 +14,74 @@
#include <asm/kvm_ppc.h>
#include <asm/disassemble.h>
+#include <asm/dbell.h>
#include "booke.h"
#include "e500.h"
+#define XOP_MSGSND 206
+#define XOP_MSGCLR 238
#define XOP_TLBIVAX 786
#define XOP_TLBSX 914
#define XOP_TLBRE 946
#define XOP_TLBWE 978
#define XOP_TLBILX 18
+#ifdef CONFIG_KVM_E500MC
+static int dbell2prio(ulong param)
+{
+ int msg = param & PPC_DBELL_TYPE_MASK;
+ int prio = -1;
+
+ switch (msg) {
+ case PPC_DBELL_TYPE(PPC_DBELL):
+ prio = BOOKE_IRQPRIO_DBELL;
+ break;
+ case PPC_DBELL_TYPE(PPC_DBELL_CRIT):
+ prio = BOOKE_IRQPRIO_DBELL_CRIT;
+ break;
+ default:
+ break;
+ }
+
+ return prio;
+}
+
+static int kvmppc_e500_emul_msgclr(struct kvm_vcpu *vcpu, int rb)
+{
+ ulong param = vcpu->arch.gpr[rb];
+ int prio = dbell2prio(param);
+
+ if (prio < 0)
+ return EMULATE_FAIL;
+
+ clear_bit(prio, &vcpu->arch.pending_exceptions);
+ return EMULATE_DONE;
+}
+
+static int kvmppc_e500_emul_msgsnd(struct kvm_vcpu *vcpu, int rb)
+{
+ ulong param = vcpu->arch.gpr[rb];
+ int prio = dbell2prio(rb);
+ int pir = param & PPC_DBELL_PIR_MASK;
+ int i;
+ struct kvm_vcpu *cvcpu;
+
+ if (prio < 0)
+ return EMULATE_FAIL;
+
+ kvm_for_each_vcpu(i, cvcpu, vcpu->kvm) {
+ int cpir = cvcpu->arch.shared->pir;
+ if ((param & PPC_DBELL_MSG_BRDCAST) || (cpir == pir)) {
+ set_bit(prio, &cvcpu->arch.pending_exceptions);
+ kvm_vcpu_kick(cvcpu);
+ }
+ }
+
+ return EMULATE_DONE;
+}
+#endif
+
int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int inst, int *advance)
{
@@ -36,6 +94,16 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
case 31:
switch (get_xop(inst)) {
+#ifdef CONFIG_KVM_E500MC
+ case XOP_MSGSND:
+ emulated = kvmppc_e500_emul_msgsnd(vcpu, get_rb(inst));
+ break;
+
+ case XOP_MSGCLR:
+ emulated = kvmppc_e500_emul_msgclr(vcpu, get_rb(inst));
+ break;
+#endif
+
case XOP_TLBRE:
emulated = kvmppc_e500_emul_tlbre(vcpu);
break;
--
1.6.0.2
^ permalink raw reply related
* [PATCH 17/37] KVM: PPC: e500mc: implicitly set MSR_GS
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
When setting MSR for an e500mc guest, we implicitly always set MSR_GS
to make sure the guest is in guest state. Since we have this implicit
rule there, we don't need to explicitly pass MSR_GS to set_msr().
Remove all explicit setters of MSR_GS.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/booke.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 85bd5b8..fcbe928 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -280,7 +280,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
unsigned int priority)
{
int allowed = 0;
- ulong uninitialized_var(msr_mask);
+ ulong msr_mask = 0;
bool update_esr = false, update_dear = false;
ulong crit_raw = vcpu->arch.shared->critical;
ulong crit_r1 = kvmppc_get_gpr(vcpu, 1);
@@ -322,20 +322,19 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
case BOOKE_IRQPRIO_AP_UNAVAIL:
case BOOKE_IRQPRIO_ALIGNMENT:
allowed = 1;
- msr_mask = MSR_GS | MSR_CE | MSR_ME | MSR_DE;
+ msr_mask = MSR_CE | MSR_ME | MSR_DE;
int_class = INT_CLASS_NONCRIT;
break;
case BOOKE_IRQPRIO_CRITICAL:
case BOOKE_IRQPRIO_DBELL_CRIT:
allowed = vcpu->arch.shared->msr & MSR_CE;
allowed = allowed && !crit;
- msr_mask = MSR_GS | MSR_ME;
+ msr_mask = MSR_ME;
int_class = INT_CLASS_CRIT;
break;
case BOOKE_IRQPRIO_MACHINE_CHECK:
allowed = vcpu->arch.shared->msr & MSR_ME;
allowed = allowed && !crit;
- msr_mask = MSR_GS;
int_class = INT_CLASS_MC;
break;
case BOOKE_IRQPRIO_DECREMENTER:
@@ -346,13 +345,13 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
case BOOKE_IRQPRIO_DBELL:
allowed = vcpu->arch.shared->msr & MSR_EE;
allowed = allowed && !crit;
- msr_mask = MSR_GS | MSR_CE | MSR_ME | MSR_DE;
+ msr_mask = MSR_CE | MSR_ME | MSR_DE;
int_class = INT_CLASS_NONCRIT;
break;
case BOOKE_IRQPRIO_DEBUG:
allowed = vcpu->arch.shared->msr & MSR_DE;
allowed = allowed && !crit;
- msr_mask = MSR_GS | MSR_ME;
+ msr_mask = MSR_ME;
int_class = INT_CLASS_CRIT;
break;
}
--
1.6.0.2
^ permalink raw reply related
* [PATCH 18/37] KVM: PPC: e500mc: Move r1/r2 restoration very early
From: Alexander Graf @ 2012-02-24 14:26 UTC (permalink / raw)
To: kvm-ppc; +Cc: Scott Wood, linuxppc-dev, kvm
In-Reply-To: <1330093591-19523-1-git-send-email-agraf@suse.de>
If we hit any exception whatsoever in the restore path and r1/r2 aren't the
host registers, we don't get a working oops. So it's always a good idea to
restore them as early as possible.
This time, it actually has practical reasons to do so too, since we need to
have the host page fault handler fix up our guest instruction read code. And
for that to work we need r1/r2 restored.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
arch/powerpc/kvm/bookehv_interrupts.S | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index 9eaeebd..63023ae 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -67,6 +67,12 @@
* saved in vcpu: cr, ctr, r3-r13
*/
.macro kvm_handler_common intno, srr0, flags
+ /* Restore host stack pointer */
+ PPC_STL r1, VCPU_GPR(r1)(r4)
+ PPC_STL r2, VCPU_GPR(r2)(r4)
+ PPC_LL r1, VCPU_HOST_STACK(r4)
+ PPC_LL r2, HOST_R2(r1)
+
mfspr r10, SPRN_PID
lwz r8, VCPU_HOST_PID(r4)
PPC_LL r11, VCPU_SHARED(r4)
@@ -290,10 +296,8 @@ _GLOBAL(kvmppc_resume_host)
/* Save remaining volatile guest register state to vcpu. */
mfspr r3, SPRN_VRSAVE
PPC_STL r0, VCPU_GPR(r0)(r4)
- PPC_STL r1, VCPU_GPR(r1)(r4)
mflr r5
mfspr r6, SPRN_SPRG4
- PPC_STL r2, VCPU_GPR(r2)(r4)
PPC_STL r5, VCPU_LR(r4)
mfspr r7, SPRN_SPRG5
PPC_STL r3, VCPU_VRSAVE(r4)
@@ -334,10 +338,6 @@ _GLOBAL(kvmppc_resume_host)
mtspr SPRN_EPCR, r3
isync
- /* Restore host stack pointer */
- PPC_LL r1, VCPU_HOST_STACK(r4)
- PPC_LL r2, HOST_R2(r1)
-
/* Switch to kernel stack and jump to handler. */
PPC_LL r3, HOST_RUN(r1)
mr r5, r14 /* intno */
--
1.6.0.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox