* Re: linux-next: build failure after merge of the final tree (powerpc related)
From: Gabriel Paubert @ 2012-06-21 7:29 UTC (permalink / raw)
To: Michael Ellerman
Cc: Stephen Rothwell, linux-next, ppc-dev, linux-kernel, Alan Modra
In-Reply-To: <1340256961.1998.11.camel@concordia>
On Thu, Jun 21, 2012 at 03:36:01PM +1000, Michael Ellerman wrote:
> On Wed, 2012-06-20 at 17:50 +1000, Stephen Rothwell wrote:
> > Hi all,
> >
> > After merging the final tree, today's linux-next build (powerpc
> > allyesconfig) failed like this:
> >
> > powerpc64-linux-ld: arch/powerpc/net/built-in.o: In function `bpf_slow_path_word':
> > (.text+0x90): sibling call optimization to `skb_copy_bits' does not allow automatic multiple TOCs; recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `skb_copy_bits' extern
>
>
> Those seem to be caused because we don't have a nop after the call,
> meaning we can't patch the TOC pointer on the way back. Adding a nop
> fixes those.
>
> But, then I get 32,410 variants of this:
>
> powerpc64-linux-ld: /src/next/net/openvswitch/vport-netdev.c:189:(.text+0x89b990):
> sibling call optimization to `_restgpr0_28' does not allow automatic multiple TOCs;
> recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `_restgpr0_28' extern
>
>
These functions should not need a TOC in the first place. There is
code in the linker (for 64 bit only: bfd/elf64-ppc.c) to automatically
generate them whenever they are needed.
I suspect you compile with -Os. But I don't think you can use
these functions when doing a sibling call since restgpr0_nn
implies a return to the caller. restgpr1_nn would be different...
> And those are generated calls so I don't see how we can fix them.
>
> > I started building with gcc 4.6.3/binutils 2.22 today. gcc
> > 4.6.0/binutils 2.21 do not produce this error, it produces this instead
> > (which has been happening for a long time):
> >
> > powerpc64-linux-ld: TOC section size exceeds 64k
>
>
> So presumably there's some new error checking that we're hitting, I
> imagine it was always broken, but now it's being more explicit.
I'm not so sure. I suspect gcc, but upgrading gcc and binutils at the
same time may not be the wisest...
Gabriel
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (powerpc related)
From: Michael Ellerman @ 2012-06-21 7:07 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Stephen Rothwell, linux-next, ppc-dev, linux-kernel, amodra
In-Reply-To: <1340259896.3942.2.camel@pasglop>
On Thu, 2012-06-21 at 16:24 +1000, Benjamin Herrenschmidt wrote:
> On Thu, 2012-06-21 at 15:36 +1000, Michael Ellerman wrote:
> >=20
> > powerpc64-linux-ld: /src/next/net/openvswitch/vport-netdev.c:189:(.text=
+0x89b990):=20
> > sibling call optimization to `_restgpr0_28' does not allow auto=
matic multiple TOCs;
> > recompile with -mminimal-toc or -fno-optimize-sibling-calls, or=
make `_restgpr0_28' extern
> >=20
> >=20
> > And those are generated calls so I don't see how we can fix them.
>=20
> Is this a module ? We should really be linking that stuff directly with t=
he module....
No, it's builtin.
> The interesting thing is that we do build everything except a handful of
> files with -mminimal-toc unless something's wrong with our main Makefile.=
...
Yeah, the top arch Makefile sets it, though we do override it in a few
places. I tried removing those overrides and it didn't seem to make any
difference.
> Can you show the full build command that triggers the above ?
Well that would be a few MBs of log, but here's an excerpt:
make -f scripts/Makefile.build obj=3Dnet/openvswitch
/opt/cross/gcc-4.6-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc -m64 -W=
p,-MD,net/openvswitch/.vport-netdev.o.d -nostdinc -isystem /opt/cross/gcc-=
4.6.3-nolibc/powerpc64-linux/lib/gcc/powerpc64-linux/4.6.3/include -I/home/=
michael/src/kmk/next/arch/powerpc/include -Iarch/powerpc/include/generated =
-Iinclude -include /home/michael/src/kmk/next/include/linux/kconfig.h -D__=
KERNEL__ -Iarch/powerpc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -f=
no-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-f=
ormat-security -fno-delete-null-pointer-checks -Os -msoft-float -pipe -Iarc=
h/powerpc -mminimal-toc -mtraceback=3Dno -mcall-aixdesc -mtune=3Dpower7 -mt=
une=3Dcell -mno-altivec -mno-vsx -mno-spe -mspe=3Dno -funit-at-a-time -fno-=
dwarf2-cfi-asm -mno-string -mno-sched-epilog -Wa,-maltivec -fno-reorder-blo=
cks -fno-ipa-cp-clone -fno-partial-inlining -Wframe-larger-than=3D2048 -fno=
-stack-protector -Wno-unused-but-set-variable -g -femit-struct-debug-baseon=
ly -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno=
-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HAVE_ASM_GOTO -fp=
rofile-arcs -ftest-coverage -D"KBUILD_STR(s)=3D#s" -D"KBUILD_BASENAME=3D=
KBUILD_STR(vport_netdev)" -D"KBUILD_MODNAME=3DKBUILD_STR(openvswitch)" -c =
-o net/openvswitch/.tmp_vport-netdev.o net/openvswitch/vport-netdev.c
if [ "-pg" =3D "-pg" ]; then set -e ; perl /home/michael/src/kmk/next/scr=
ipts/recordmcount.pl "powerpc" "little" "64" "/opt/cross/gcc-4.6-nolibc/pow=
erpc64-linux/bin/powerpc64-linux-objdump" "/opt/cross/gcc-4.6-nolibc/powerp=
c64-linux/bin/powerpc64-linux-objcopy" "/opt/cross/gcc-4.6-nolibc/powerpc64=
-linux/bin/powerpc64-linux-gcc -m64 -Wall -Wundef -Wstrict-prototypes -Wno-=
trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declar=
ation -Wno-format-security -fno-delete-null-pointer-checks -Os -msoft-float=
-pipe -Iarch/powerpc -mminimal-toc -mtraceback=3Dno -mcall-aixdesc -mtune=
=3Dpower7 -mtune=3Dcell -mno-altivec -mno-vsx -mno-spe -mspe=3Dno -funit-at=
-a-time -fno-dwarf2-cfi-asm -mno-string -mno-sched-epilog -Wa,-maltivec -fn=
o-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining -Wframe-larger-tha=
n=3D2048 -fno-stack-protector -Wno-unused-but-set-variable -g -femit-stru=
ct-debug-baseonly -pg -fno-inline-functions-called-once -Wdeclaration-afte=
r-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HA=
VE_ASM_GOTO" "/opt/cross/gcc-4.6-nolibc/powerpc64-linux/bin/powerpc64-linux=
-ld -m elf64ppc" "/opt/cross/gcc-4.6-nolibc/powerpc64-linux/bin/powerpc64-l=
inux-nm --synthetic" "" "" "0" "net/openvswitch/vport-netdev.o"; fi;
And then a whole bunch of calls to ld.
So we are at least building that file with -mminimal-toc.
cheers
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (powerpc related)
From: Benjamin Herrenschmidt @ 2012-06-21 6:24 UTC (permalink / raw)
To: Michael Ellerman
Cc: Stephen Rothwell, linux-next, ppc-dev, linux-kernel, Alan Modra
In-Reply-To: <1340256961.1998.11.camel@concordia>
On Thu, 2012-06-21 at 15:36 +1000, Michael Ellerman wrote:
>
> powerpc64-linux-ld: /src/next/net/openvswitch/vport-netdev.c:189:(.text+0x89b990):
> sibling call optimization to `_restgpr0_28' does not allow automatic multiple TOCs;
> recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `_restgpr0_28' extern
>
>
> And those are generated calls so I don't see how we can fix them.
Is this a module ? We should really be linking that stuff directly with the module....
The interesting thing is that we do build everything except a handful of
files with -mminimal-toc unless something's wrong with our main Makefile....
Can you show the full build command that triggers the above ?
Cheers,
Ben.
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (powerpc related)
From: Michael Ellerman @ 2012-06-21 5:36 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, ppc-dev, linux-kernel, Alan Modra
In-Reply-To: <20120620175014.a822a766e0f91f7b44f48fa0@canb.auug.org.au>
On Wed, 2012-06-20 at 17:50 +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> powerpc64-linux-ld: arch/powerpc/net/built-in.o: In function `bpf_slow_path_word':
> (.text+0x90): sibling call optimization to `skb_copy_bits' does not allow automatic multiple TOCs; recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `skb_copy_bits' extern
Those seem to be caused because we don't have a nop after the call,
meaning we can't patch the TOC pointer on the way back. Adding a nop
fixes those.
But, then I get 32,410 variants of this:
powerpc64-linux-ld: /src/next/net/openvswitch/vport-netdev.c:189:(.text+0x89b990):
sibling call optimization to `_restgpr0_28' does not allow automatic multiple TOCs;
recompile with -mminimal-toc or -fno-optimize-sibling-calls, or make `_restgpr0_28' extern
And those are generated calls so I don't see how we can fix them.
> I started building with gcc 4.6.3/binutils 2.22 today. gcc
> 4.6.0/binutils 2.21 do not produce this error, it produces this instead
> (which has been happening for a long time):
>
> powerpc64-linux-ld: TOC section size exceeds 64k
So presumably there's some new error checking that we're hitting, I
imagine it was always broken, but now it's being more explicit.
I think we need some help from the toolchain experts, hi Alan :)
cheers
^ permalink raw reply
* Re: [PATCH] PPC: PCI: Fix pcibios_io_space_offset() so it works for 32-bit ptr/64-bit rsrcs
From: Benjamin Herrenschmidt @ 2012-06-21 2:46 UTC (permalink / raw)
To: Ben Collins, Bjorn Helgaas; +Cc: linuxppc-dev
In-Reply-To: <4DC27253-67FC-4A55-8C78-7782D9D0CF53@servergy.com>
(Bjorn, added you back because I ended up digging a shitload
of issues including some generic ... see below)
On Tue, 2012-06-05 at 23:50 -0400, Ben Collins wrote:
> The commit introducing pcibios_io_space_offset() was ignoring 32-bit to
> 64-bit sign extention, which is the case on ppc32 with 64-bit resource
> addresses. This only seems to have shown up while running under QEMU for
> e500mc target. It may or may be suboptimal that QEMU has an IO base
> address > 32-bits for the e500-pci implementation, but 1) it's still a
> regression and 2) it's more correct to handle things this way.
So I came to the conclusion that this isn't the right fix... what we
have is an "interesting" combinations of issues here and I'll have to
dig with Bjorn to sort them all out.
In the meantime, let me know if the "quick fix" below works for you
as a workaround:
@@ -734,7 +740,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_contr
hose->io_base_virt = ioremap(cpu_addr, size);
/* Expect trouble if pci_addr is not 0 */
- if (primary)
+ if (primary || !isa_io_base)
isa_io_base =
(unsigned long)hose->io_base_virt;
(Note: The root of the qemu issue seems to be that qemu doesn't accept
an IO BAR with a value of 0 as a valid IO BAR... which is arguably a
qemu bug. However, we shouldn't have assigned that if it wasn't for
a bunch of other nasties)
Now, we have a combination of problems here Bjorn. A bunch of them are
powerpc specific and I'll fix them, but I'm hitting a couple of nasties
in the generic resource allocation code:
* I'm not too happy with our pcibios_io_space_offset() sign extension,
but that's no biggie, I will fix that
* It triggers a bunch of other problems where quite a bit of code
in pci-common.c seems to be assuming 32-bit arithmetic when messing
around with the port remapping, so I have fixes for all of that
* Additionally, we end up with a crazy offset for IO because our
isa_io_base is only set if we mark a host bridge as "primary" and it
looks like the FSL code doesn't mark any. So our isa_io_base is 0
instead of the virt base of the first bridge, and thus our resource
offsets are equal to the virt base of the IO space of the bridge :-)
This isn't wrong per-se, ie, it -should- still work, but it then
trigger interesting problems. The patch above "corrects" that by making
isa_io_base default to the first bridge IO base if there's no primary.
* PCIBIOS_IO_MIN (and MEM_MIN) are bogus... On most architectures
they represent a bus address, but the generic code uses them as a
resource address. So they don't work and we end up handing out
an IO resource equal to 0 (bus) instead of 0x1000 (bus) because the
offset'ed resource address isn't smaller than the min. Now I do have a
patch to fix that in the generic code, but I suspect that will break
a couple of archs:
arch/mn10300/include/asm/pci.h:#define PCIBIOS_MIN_IO 0xBE000004
arch/alpha/include/asm/pci.h:#define PCIBIOS_MIN_IO alpha_mv.min_io_address
and maybe some mips stuff, I'm not sure. Do those archs do any
offsetting ? If they do we might want to change those defines
along with my patch:
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index eea85da..ec429f3 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -131,10 +131,20 @@ static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
int resno, resource_size_t size, resource_size_t align)
{
struct resource *res = dev->resource + resno;
+ struct resource min_res;
+ struct pci_bus_region min_reg;
resource_size_t min;
int ret;
- min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
+ /*
+ * We convert PCIBIOS_MIN_IO/MEM from bus addresses to
+ * resources before passing them to pci_bus_alloc_resource
+ */
+ min_res.flags = res->flags;
+ min_reg.start = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
+ min_reg.end = min_reg.start;
+ pcibios_bus_to_resource(dev, &min_res, &min_reg);
+ min = min_res.start;
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
* Additionally, there's another problem inside pci_bus_alloc_resource()
itself:
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
r->start ? : min,
max, align,
alignf, alignf_data);
See the r->start ? : min ?
It only applies the "min" if r->start is 0.... now we have a hack in arch/powerpc
to clear out resources we think are unassigned. Unfortunately that hack got broken
when moving the offett'ing to generic code because it now tests the resource start
rather than the bus address (but thinks it tests the bus address).
So with a fix for that hack, I set r->start to 0 for anything that originally had
a "bus address" of 0, and the above passes, I get min, and things work. Pfiew !
Maybe a better thing to do would be to test if r->start < min ? That would work
but maybe it subtly breaks some x86 stuff where we want BIOS assigned addresses
< min to remain in place ?
What do you reckon ?
Cheers,
Ben.
> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
> arch/powerpc/kernel/pci-common.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 8e78e93..be9ced7 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1477,9 +1477,15 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
> return pci_enable_resources(dev, mask);
> }
>
> +/* Before assuming too much here, take care to realize that we need sign
> + * extension from 32-bit pointers to 64-bit resource addresses to work.
> + */
> resource_size_t pcibios_io_space_offset(struct pci_controller *hose)
> {
> - return (unsigned long) hose->io_base_virt - _IO_BASE;
> + long vbase = (long)hose->io_base_virt;
> + long io_base = _IO_BASE;
> +
> + return (resource_size_t)(vbase - io_base);
> }
>
> static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources)
^ permalink raw reply related
* [PATCH 18/18] powerpc: enforce usage of RA 0-R31 where possible
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Some macros use RA where when RA=R0 the values is 0, so make this
the enforced mnemonic in the macro.
Idea suggested by Andreas Schwab.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 14 +++++++-------
arch/powerpc/kernel/cpu_setup_a2.S | 2 +-
arch/powerpc/kernel/exceptions-64e.S | 8 ++++----
arch/powerpc/mm/tlb_low_64e.S | 10 +++++-----
arch/powerpc/mm/tlb_nohash_low.S | 16 ++++++++--------
5 files changed, 25 insertions(+), 25 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -198,7 +198,7 @@
#define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI)
#define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI)
#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_T_TLB(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b)
#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b)
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
@@ -207,23 +207,23 @@
#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \
___PPC_RB(a) | ___PPC_RS(lp))
#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
- __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RA0(a) | __PPC_RB(b))
#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \
- __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATWE(s, a, w) stringify_in_c(.long PPC_INST_ERATWE | \
__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
#define PPC_ERATRE(s, a, w) stringify_in_c(.long PPC_INST_ERATRE | \
__PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w))
#define PPC_ERATILX(t, a, b) stringify_in_c(.long PPC_INST_ERATILX | \
- __PPC_T_TLB(t) | __PPC_RA(a) | \
+ __PPC_T_TLB(t) | __PPC_RA0(a) | \
__PPC_RB(b))
#define PPC_ERATIVAX(s, a, b) stringify_in_c(.long PPC_INST_ERATIVAX | \
- __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(s) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATSX(t, a, w) stringify_in_c(.long PPC_INST_ERATSX | \
- __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_ERATSX_DOT(t, a, w) stringify_in_c(.long PPC_INST_ERATSX_DOT | \
- __PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
+ __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \
__PPC_RT(t) | __PPC_RB(b))
/* PASemi instructions */
Index: powerpc-test/arch/powerpc/kernel/cpu_setup_a2.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/cpu_setup_a2.S
+++ powerpc-test/arch/powerpc/kernel/cpu_setup_a2.S
@@ -112,7 +112,7 @@ _icswx_skip_guest:
* a bolted entry though it will be in LRU and so will go away eventually
* but let's not bother for now
*/
- PPC_ERATILX(0,R0,R0)
+ PPC_ERATILX(0,0,R0)
1:
blr
Index: powerpc-test/arch/powerpc/kernel/exceptions-64e.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/exceptions-64e.S
+++ powerpc-test/arch/powerpc/kernel/exceptions-64e.S
@@ -903,7 +903,7 @@ skpinv: addi r6,r6,1 /* Increment */
bne 1b /* If not, repeat */
/* Invalidate all TLBs */
- PPC_TLBILX_ALL(R0,R0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -961,7 +961,7 @@ skpinv: addi r6,r6,1 /* Increment */
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(R0,R0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1020,7 +1020,7 @@ skpinv: addi r6,r6,1 /* Increment */
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(R0,R0)
+ PPC_TLBILX_ALL(0,R0)
sync
isync
@@ -1138,7 +1138,7 @@ a2_tlbinit_after_iprot_flush:
tlbwe
#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
- PPC_TLBILX(0,R0,R0)
+ PPC_TLBILX(0,0,R0)
sync
isync
Index: powerpc-test/arch/powerpc/mm/tlb_low_64e.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/tlb_low_64e.S
+++ powerpc-test/arch/powerpc/mm/tlb_low_64e.S
@@ -126,7 +126,7 @@ BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(R0,R16)
+ PPC_TLBSRX_DOT(0,R16)
ldx r14,r14,r15 /* grab pgd entry */
beq normal_tlb_miss_done /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
@@ -395,7 +395,7 @@ BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(R0,R16)
+ PPC_TLBSRX_DOT(0,R16)
ld r14,0(r10)
beq normal_tlb_miss_done
MMU_FTR_SECTION_ELSE
@@ -528,7 +528,7 @@ BEGIN_MMU_FTR_SECTION
/* Search if we already have a TLB entry for that virtual address, and
* if we do, bail out.
*/
- PPC_TLBSRX_DOT(R0,R16)
+ PPC_TLBSRX_DOT(0,R16)
beq virt_page_table_tlb_miss_done
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
@@ -779,7 +779,7 @@ htw_tlb_miss:
*
* MAS1:IND should be already set based on MAS4
*/
- PPC_TLBSRX_DOT(R0,R16)
+ PPC_TLBSRX_DOT(0,R16)
beq htw_tlb_miss_done
/* Now, we need to walk the page tables. First check if we are in
@@ -919,7 +919,7 @@ tlb_load_linear:
mtspr SPRN_MAS1,r15
/* Already somebody there ? */
- PPC_TLBSRX_DOT(R0,R16)
+ PPC_TLBSRX_DOT(0,R16)
beq tlb_load_linear_done
/* Now we build the remaining MAS. MAS0 and 2 should be fine
Index: powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/tlb_nohash_low.S
+++ powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
@@ -266,7 +266,7 @@ BEGIN_MMU_FTR_SECTION
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_ALL(R0,R0)
+ PPC_TLBILX_ALL(0,R0)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -279,7 +279,7 @@ BEGIN_MMU_FTR_SECTION
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
- PPC_TLBILX_PID(R0,R0)
+ PPC_TLBILX_PID(0,R0)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
@@ -313,7 +313,7 @@ BEGIN_MMU_FTR_SECTION
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_VA(R0,R3)
+ PPC_TLBILX_VA(0,R3)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -331,7 +331,7 @@ _GLOBAL(_tlbil_pid)
mfmsr r10
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(R0,R0)
+ PPC_TLBILX_PID(0,R0)
wrtee r10
msync
isync
@@ -343,14 +343,14 @@ _GLOBAL(_tlbil_pid_noind)
ori r4,r4,MAS6_SIND
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(R0,R0)
+ PPC_TLBILX_PID(0,R0)
wrtee r10
msync
isync
blr
_GLOBAL(_tlbil_all)
- PPC_TLBILX_ALL(R0,R0)
+ PPC_TLBILX_ALL(0,R0)
msync
isync
blr
@@ -364,7 +364,7 @@ _GLOBAL(_tlbil_va)
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBILX_VA(R0,R3)
+ PPC_TLBILX_VA(0,R3)
msync
isync
wrtee r10
@@ -379,7 +379,7 @@ _GLOBAL(_tlbivax_bcast)
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBIVAX(R0,R3)
+ PPC_TLBIVAX(0,R3)
eieio
tlbsync
sync
^ permalink raw reply
* [PATCH 17/18] powerpc: Add defines for RA 0-R31
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
R0 is special since it'll be 0.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -48,6 +48,39 @@
#define __REG_R30 30
#define __REG_R31 31
+#define __REGA0_0 0
+#define __REGA0_R1 1
+#define __REGA0_R2 2
+#define __REGA0_R3 3
+#define __REGA0_R4 4
+#define __REGA0_R5 5
+#define __REGA0_R6 6
+#define __REGA0_R7 7
+#define __REGA0_R8 8
+#define __REGA0_R9 9
+#define __REGA0_R10 10
+#define __REGA0_R11 11
+#define __REGA0_R12 12
+#define __REGA0_R13 13
+#define __REGA0_R14 14
+#define __REGA0_R15 15
+#define __REGA0_R16 16
+#define __REGA0_R17 17
+#define __REGA0_R18 18
+#define __REGA0_R19 19
+#define __REGA0_R20 20
+#define __REGA0_R21 21
+#define __REGA0_R22 22
+#define __REGA0_R23 23
+#define __REGA0_R24 24
+#define __REGA0_R25 25
+#define __REGA0_R26 26
+#define __REGA0_R27 27
+#define __REGA0_R28 28
+#define __REGA0_R29 29
+#define __REGA0_R30 30
+#define __REGA0_R31 31
+
/* sorted alphabetically */
#define PPC_INST_DCBA 0x7c0005ec
#define PPC_INST_DCBA_MASK 0xfc0007fe
@@ -149,6 +182,7 @@
#define ___PPC_RS(s) (((s) & 0x1f) << 21)
#define ___PPC_RT(t) ___PPC_RS(t)
#define __PPC_RA(a) ___PPC_RA(__REG_##a)
+#define __PPC_RA0(a) ___PPC_RA(__REGA0_##a)
#define __PPC_RB(b) ___PPC_RB(__REG_##b)
#define __PPC_RS(s) ___PPC_RS(__REG_##s)
#define __PPC_RT(t) ___PPC_RT(__REG_##t)
^ permalink raw reply
* [PATCH 16/18] powerpc: enforce usage of R0-R31 where possible
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Enforce the use of R0-R31 in macros where possible now we have all the
fixes in.
R0-R31 macros are removed here so that can't be used anymore. They
should not be defined anywhere.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 41 +++-------------------------------
arch/powerpc/include/asm/ppc_asm.h | 17 ++++++++------
arch/powerpc/kernel/fpu.S | 12 +++++----
arch/powerpc/kvm/booke_interrupts.S | 3 +-
4 files changed, 23 insertions(+), 50 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -15,39 +15,6 @@
#include <linux/stringify.h>
#include <asm/asm-compat.h>
-#define R0 0
-#define R1 1
-#define R2 2
-#define R3 3
-#define R4 4
-#define R5 5
-#define R6 6
-#define R7 7
-#define R8 8
-#define R9 9
-#define R10 10
-#define R11 11
-#define R12 12
-#define R13 13
-#define R14 14
-#define R15 15
-#define R16 16
-#define R17 17
-#define R18 18
-#define R19 19
-#define R20 20
-#define R21 21
-#define R22 22
-#define R23 23
-#define R24 24
-#define R25 25
-#define R26 26
-#define R27 27
-#define R28 28
-#define R29 29
-#define R30 30
-#define R31 31
-
#define __REG_R0 0
#define __REG_R1 1
#define __REG_R2 2
@@ -181,10 +148,10 @@
#define ___PPC_RB(b) (((b) & 0x1f) << 11)
#define ___PPC_RS(s) (((s) & 0x1f) << 21)
#define ___PPC_RT(t) ___PPC_RS(t)
-#define __PPC_RA(a) (((a) & 0x1f) << 16)
-#define __PPC_RB(b) (((b) & 0x1f) << 11)
-#define __PPC_RS(s) (((s) & 0x1f) << 21)
-#define __PPC_RT(s) __PPC_RS(s)
+#define __PPC_RA(a) ___PPC_RA(__REG_##a)
+#define __PPC_RB(b) ___PPC_RB(__REG_##b)
+#define __PPC_RS(s) ___PPC_RS(__REG_##s)
+#define __PPC_RT(t) ___PPC_RT(__REG_##t)
#define __PPC_XA(a) ((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3))
#define __PPC_XB(b) ((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4))
#define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -126,26 +126,26 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
/* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,base,b)
+#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,R##base,R##b)
#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
+#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,R##base,R##b)
#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base)
#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,base,b)
+#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,R##base,R##b)
#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
+#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,R##base,R##b)
#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
@@ -183,15 +183,18 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
#else
#define ULONG_SIZE 4
#endif
-#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+#define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_GPR(n) __VCPU_GPR(__REG_##n)
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
+#define __STK_REG(i) (112 + ((i)-14)*8)
+#define STK_REG(i) __STK_REG(__REG_##i)
-#define STK_PARAM(i) (48 + ((i)-3)*8)
+#define __STK_PARAM(i) (48 + ((i)-3)*8)
+#define STK_PARAM(i) __STK_PARAM(__REG_##i)
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
Index: powerpc-test/arch/powerpc/kernel/fpu.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/fpu.S
+++ powerpc-test/arch/powerpc/kernel/fpu.S
@@ -26,7 +26,7 @@
#include <asm/ptrace.h>
#ifdef CONFIG_VSX
-#define REST_32FPVSRS(n,c,base) \
+#define __REST_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
@@ -35,7 +35,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);
2: REST_32VSRS(n,c,base); \
3:
-#define SAVE_32FPVSRS(n,c,base) \
+#define __SAVE_32FPVSRS(n,c,base) \
BEGIN_FTR_SECTION \
b 2f; \
END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
@@ -44,9 +44,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);
2: SAVE_32VSRS(n,c,base); \
3:
#else
-#define REST_32FPVSRS(n,b,base) REST_32FPRS(n, base)
-#define SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base)
+#define __REST_32FPVSRS(n,b,base) REST_32FPRS(n, base)
+#define __SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base)
#endif
+#define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base)
+#define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base)
/*
* This task wants to use the FPU now.
@@ -79,7 +81,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
beq 1f
toreal(r4)
addi r4,r4,THREAD /* want last_task_used_math->thread */
- SAVE_32FPVSRS(0, r5, r4)
+ SAVE_32FPVSRS(0, R5, R4)
mffs fr0
stfd fr0,THREAD_FPSCR(r4)
PPC_LL r5,PT_REGS(r4)
Index: powerpc-test/arch/powerpc/kvm/booke_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/booke_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/booke_interrupts.S
@@ -34,7 +34,8 @@
#define HOST_R2 12
#define HOST_CR 16
#define HOST_NV_GPRS 20
-#define HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4))
+#define __HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4))
+#define HOST_NV_GPR(n) __HOST_NV_GPR(__REG_##n)
#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(R31) + 4)
#define HOST_STACK_SIZE (((HOST_MIN_STACK_SIZE + 15) / 16) * 16) /* Align. */
#define HOST_STACK_LR (HOST_STACK_SIZE + 4) /* In caller stack frame. */
^ permalink raw reply
* [PATCH 15/18] powerpc: Introduce new __REG_R macros
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -48,6 +48,39 @@
#define R30 30
#define R31 31
+#define __REG_R0 0
+#define __REG_R1 1
+#define __REG_R2 2
+#define __REG_R3 3
+#define __REG_R4 4
+#define __REG_R5 5
+#define __REG_R6 6
+#define __REG_R7 7
+#define __REG_R8 8
+#define __REG_R9 9
+#define __REG_R10 10
+#define __REG_R11 11
+#define __REG_R12 12
+#define __REG_R13 13
+#define __REG_R14 14
+#define __REG_R15 15
+#define __REG_R16 16
+#define __REG_R17 17
+#define __REG_R18 18
+#define __REG_R19 19
+#define __REG_R20 20
+#define __REG_R21 21
+#define __REG_R22 22
+#define __REG_R23 23
+#define __REG_R24 24
+#define __REG_R25 25
+#define __REG_R26 26
+#define __REG_R27 27
+#define __REG_R28 28
+#define __REG_R29 29
+#define __REG_R30 30
+#define __REG_R31 31
+
/* sorted alphabetically */
#define PPC_INST_DCBA 0x7c0005ec
#define PPC_INST_DCBA_MASK 0xfc0007fe
^ permalink raw reply
* [PATCH 14/18] powerpc: start using ___PPC_RA/B/S/T where necessary
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Now have ___PPC_RA/B/S/T we can use it in some places. These are
places where we can't use the existing defines which will soon enforce
R0-R31 usage.
The macros being changed here are being used in inline asm, which
can't convert to enforce the R0-R31 usage.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -180,13 +180,13 @@
#define PPC_DCBZL(a, b) stringify_in_c(.long PPC_INST_DCBZL | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \
- __PPC_RT(t) | __PPC_RA(a) | \
- __PPC_RB(b) | __PPC_EH(eh))
+ ___PPC_RT(t) | ___PPC_RA(a) | \
+ ___PPC_RB(b) | __PPC_EH(eh))
#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \
- __PPC_RT(t) | __PPC_RA(a) | \
- __PPC_RB(b) | __PPC_EH(eh))
+ ___PPC_RT(t) | ___PPC_RA(a) | \
+ ___PPC_RB(b) | __PPC_EH(eh))
#define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \
- __PPC_RB(b))
+ ___PPC_RB(b))
#define PPC_POPCNTB(a, s) stringify_in_c(.long PPC_INST_POPCNTB | \
__PPC_RA(a) | __PPC_RS(s))
#define PPC_POPCNTD(a, s) stringify_in_c(.long PPC_INST_POPCNTD | \
@@ -204,7 +204,7 @@
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \
- __PPC_RB(a) | __PPC_RS(lp))
+ ___PPC_RB(a) | ___PPC_RS(lp))
#define PPC_TLBSRX_DOT(a,b) stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
__PPC_RA(a) | __PPC_RB(b))
#define PPC_TLBIVAX(a,b) stringify_in_c(.long PPC_INST_TLBIVAX | \
^ permalink raw reply
* [PATCH 13/18] powerpc: introduce new ___PPC_RA/B/S/T macros
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
These are currently the same as __PPC_RA/B/S/T but we'll wrap them
soon.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 4 ++++
1 file changed, 4 insertions(+)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -144,6 +144,10 @@
#define PPC_INST_STBCIX 0x7c0007aa
/* macros to insert fields into opcodes */
+#define ___PPC_RA(a) (((a) & 0x1f) << 16)
+#define ___PPC_RB(b) (((b) & 0x1f) << 11)
+#define ___PPC_RS(s) (((s) & 0x1f) << 21)
+#define ___PPC_RT(t) ___PPC_RS(t)
#define __PPC_RA(a) (((a) & 0x1f) << 16)
#define __PPC_RB(b) (((b) & 0x1f) << 11)
#define __PPC_RS(s) (((s) & 0x1f) << 21)
^ permalink raw reply
* [PATCH 12/18] powerpc: fix VSX macros so register names aren't wrapped
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
We need to do this so we can enforce the name of a and b in called
macros PPC_RA/B later.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -234,11 +234,11 @@
#define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
#define VSX_XX3(t, a, b) (__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b))
#define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \
- VSX_XX1((s), (a), (b)))
+ VSX_XX1((s), a, b))
#define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \
- VSX_XX1((s), (a), (b)))
+ VSX_XX1((s), a, b))
#define XXLOR(t, a, b) stringify_in_c(.long PPC_INST_XXLOR | \
- VSX_XX3((t), (a), (b)))
+ VSX_XX3((t), a, b))
#define PPC_NAP stringify_in_c(.long PPC_INST_NAP)
#define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP)
^ permalink raw reply
* [PATCH 11/18] powerpc: fixes for instructions not using correct register naming
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
These macros are using integers where they could be using logical
names since they take registers.
We are going to enforce this soon, so fix these up now.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/kernel/exceptions-64e.S | 8 ++++----
arch/powerpc/kernel/misc_64.S | 4 ++--
arch/powerpc/lib/ldstfp.S | 4 ++--
arch/powerpc/mm/tlb_nohash_low.S | 10 +++++-----
4 files changed, 13 insertions(+), 13 deletions(-)
Index: powerpc-test/arch/powerpc/kernel/exceptions-64e.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/exceptions-64e.S
+++ powerpc-test/arch/powerpc/kernel/exceptions-64e.S
@@ -903,7 +903,7 @@ skpinv: addi r6,r6,1 /* Increment */
bne 1b /* If not, repeat */
/* Invalidate all TLBs */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(R0,R0)
sync
isync
@@ -961,7 +961,7 @@ skpinv: addi r6,r6,1 /* Increment */
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(R0,R0)
sync
isync
@@ -1020,7 +1020,7 @@ skpinv: addi r6,r6,1 /* Increment */
tlbwe
/* Invalidate TLB1 */
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(R0,R0)
sync
isync
@@ -1138,7 +1138,7 @@ a2_tlbinit_after_iprot_flush:
tlbwe
#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
- PPC_TLBILX(0,0,0)
+ PPC_TLBILX(0,R0,R0)
sync
isync
Index: powerpc-test/arch/powerpc/kernel/misc_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/misc_64.S
+++ powerpc-test/arch/powerpc/kernel/misc_64.S
@@ -309,7 +309,7 @@ _GLOBAL(real_205_readb)
mtmsrd r0
sync
isync
- LBZCIX(R3,0,R3)
+ LBZCIX(R3,R0,R3)
isync
mtmsrd r7
sync
@@ -324,7 +324,7 @@ _GLOBAL(real_205_writeb)
mtmsrd r0
sync
isync
- STBCIX(R3,0,R4)
+ STBCIX(R3,R0,R4)
isync
mtmsrd r7
sync
Index: powerpc-test/arch/powerpc/lib/ldstfp.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/ldstfp.S
+++ powerpc-test/arch/powerpc/lib/ldstfp.S
@@ -332,7 +332,7 @@ _GLOBAL(do_lxvd2x)
beq cr7,1f
STXVD2X(0,R1,R8)
1: li r9,-EFAULT
-2: LXVD2X(0,0,R4)
+2: LXVD2X(0,R0,R4)
li r9,0
3: beq cr7,4f
bl put_vsr
@@ -361,7 +361,7 @@ _GLOBAL(do_stxvd2x)
STXVD2X(0,R1,R8)
bl get_vsr
1: li r9,-EFAULT
-2: STXVD2X(0,0,R4)
+2: STXVD2X(0,R0,R4)
li r9,0
3: beq cr7,4f
LXVD2X(0,R1,R8)
Index: powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/tlb_nohash_low.S
+++ powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
@@ -266,7 +266,7 @@ BEGIN_MMU_FTR_SECTION
andi. r3,r3,MMUCSR0_TLBFI@l
bne 1b
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(R0,R0)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -279,7 +279,7 @@ BEGIN_MMU_FTR_SECTION
wrteei 0
mfspr r4,SPRN_MAS6 /* save MAS6 */
mtspr SPRN_MAS6,r3
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(R0,R0)
mtspr SPRN_MAS6,r4 /* restore MAS6 */
wrtee r10
MMU_FTR_SECTION_ELSE
@@ -331,7 +331,7 @@ _GLOBAL(_tlbil_pid)
mfmsr r10
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(R0,R0)
wrtee r10
msync
isync
@@ -343,14 +343,14 @@ _GLOBAL(_tlbil_pid_noind)
ori r4,r4,MAS6_SIND
wrteei 0
mtspr SPRN_MAS6,r4
- PPC_TLBILX_PID(0,0)
+ PPC_TLBILX_PID(R0,R0)
wrtee r10
msync
isync
blr
_GLOBAL(_tlbil_all)
- PPC_TLBILX_ALL(0,0)
+ PPC_TLBILX_ALL(R0,R0)
msync
isync
blr
^ permalink raw reply
* [PATCH 10/18] powerpc: change LOAD_REG_ADDR to use real register names
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
LOAD_REG_ADDR define is just a wrapper around real instructions so we
can just use real register names here (ie. lower case).
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: powerpc-test/arch/powerpc/platforms/powernv/opal-wrappers.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ powerpc-test/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
std r12,PACASAVEDMSR(r13); \
andc r12,r12,r0; \
mtmsrd r12,1; \
- LOAD_REG_ADDR(R0,.opal_return); \
+ LOAD_REG_ADDR(r0,.opal_return); \
mtlr r0; \
li r0,MSR_DR|MSR_IR; \
andc r12,r12,r0; \
^ permalink raw reply
* [PATCH 9/18] powerpc: change mtcrf to use real register names
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
mtocrf define is just a wrapper around the real instructions so we can
just use real register names here (ie. lower case).
Also remove braces in macro so this is possible.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/asm-compat.h | 2 +-
arch/powerpc/include/asm/ppc_asm.h | 4 ++--
arch/powerpc/lib/copyuser_64.S | 6 +++---
arch/powerpc/lib/mem_64.S | 6 +++---
arch/powerpc/lib/memcpy_64.S | 6 +++---
5 files changed, 12 insertions(+), 12 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/asm-compat.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/asm-compat.h
+++ powerpc-test/arch/powerpc/include/asm/asm-compat.h
@@ -29,7 +29,7 @@
#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh)
#define PPC_STLCX stringify_in_c(stdcx.)
#define PPC_CNTLZL stringify_in_c(cntlzd)
-#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS))
+#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS)
#define PPC_LR_STKOFF 16
#define PPC_MIN_STKFRM 112
#else /* 32-bit */
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -384,9 +384,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#ifdef CONFIG_PPC64
#define MTOCRF(FXM, RS) \
BEGIN_FTR_SECTION_NESTED(848); \
- mtcrf (FXM), (RS); \
+ mtcrf (FXM), RS; \
FTR_SECTION_ELSE_NESTED(848); \
- mtocrf (FXM), (RS); \
+ mtocrf (FXM), RS; \
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
#endif
Index: powerpc-test/arch/powerpc/lib/copyuser_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copyuser_64.S
+++ powerpc-test/arch/powerpc/lib/copyuser_64.S
@@ -30,7 +30,7 @@ _GLOBAL(__copy_tofrom_user_base)
dcbt 0,r4
beq .Lcopy_page_4K
andi. r6,r6,7
- PPC_MTOCRF(0x01,R5)
+ PPC_MTOCRF(0x01,r5)
blt cr1,.Lshort_copy
/* Below we want to nop out the bne if we're on a CPU that has the
* CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
@@ -186,7 +186,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
blr
.Ldst_unaligned:
- PPC_MTOCRF(0x01,R6) /* put #bytes to 8B bdry into cr7 */
+ PPC_MTOCRF(0x01,r6) /* put #bytes to 8B bdry into cr7 */
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -201,7 +201,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
2: bf cr7*4+1,3f
37: lwzx r0,r7,r4
83: stwx r0,r7,r3
-3: PPC_MTOCRF(0x01,R5)
+3: PPC_MTOCRF(0x01,r5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
Index: powerpc-test/arch/powerpc/lib/mem_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/mem_64.S
+++ powerpc-test/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@ _GLOBAL(memset)
rlwimi r4,r4,16,0,15
cmplw cr1,r5,r0 /* do we get that far? */
rldimi r4,r4,32,0
- PPC_MTOCRF(1,R0)
+ PPC_MTOCRF(1,r0)
mr r6,r3
blt cr1,8f
beq+ 3f /* if already 8-byte aligned */
@@ -49,7 +49,7 @@ _GLOBAL(memset)
bdnz 4b
5: srwi. r0,r5,3
clrlwi r5,r5,29
- PPC_MTOCRF(1,R0)
+ PPC_MTOCRF(1,r0)
beq 8f
bf 29,6f
std r4,0(r6)
@@ -65,7 +65,7 @@ _GLOBAL(memset)
std r4,0(r6)
addi r6,r6,8
8: cmpwi r5,0
- PPC_MTOCRF(1,R5)
+ PPC_MTOCRF(1,r5)
beqlr+
bf 29,9f
stw r4,0(r6)
Index: powerpc-test/arch/powerpc/lib/memcpy_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/memcpy_64.S
+++ powerpc-test/arch/powerpc/lib/memcpy_64.S
@@ -16,7 +16,7 @@ BEGIN_FTR_SECTION
FTR_SECTION_ELSE
b memcpy_power7
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
- PPC_MTOCRF(0x01,R5)
+ PPC_MTOCRF(0x01,r5)
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
andi. r6,r6,7
@@ -158,7 +158,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
blr
.Ldst_unaligned:
- PPC_MTOCRF(0x01,R6) # put #bytes to 8B bdry into cr7
+ PPC_MTOCRF(0x01,r6) # put #bytes to 8B bdry into cr7
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -173,7 +173,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
2: bf cr7*4+1,3f
lwzx r0,r7,r4
stwx r0,r7,r3
-3: PPC_MTOCRF(0x01,R5)
+3: PPC_MTOCRF(0x01,r5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
^ permalink raw reply
* [PATCH 8/18] powerpc: merge VCPU_GPR
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Merge the defines of VCPU_GPR from different places.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc_asm.h | 7 +++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 3 ---
arch/powerpc/kvm/book3s_interrupts.S | 8 --------
arch/powerpc/kvm/booke_interrupts.S | 2 --
arch/powerpc/kvm/bookehv_interrupts.S | 1 -
5 files changed, 7 insertions(+), 14 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -178,6 +178,13 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
#define HMT_HIGH or 3,3,3
#define HMT_EXTRA_HIGH or 7,7,7 # power7 only
+#ifdef CONFIG_PPC64
+#define ULONG_SIZE 8
+#else
+#define ULONG_SIZE 4
+#endif
+#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
Index: powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -72,9 +72,6 @@ _GLOBAL(kvmppc_hv_entry_trampoline)
mtsrr1 r6
RFI
-#define ULONG_SIZE 8
-#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
-
/******************************************************************************
* *
* Entry code *
Index: powerpc-test/arch/powerpc/kvm/book3s_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/book3s_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/book3s_interrupts.S
@@ -25,19 +25,11 @@
#include <asm/exception-64s.h>
#if defined(CONFIG_PPC_BOOK3S_64)
-
-#define ULONG_SIZE 8
#define FUNC(name) GLUE(.,name)
-
#elif defined(CONFIG_PPC_BOOK3S_32)
-
-#define ULONG_SIZE 4
#define FUNC(name) name
-
#endif /* CONFIG_PPC_BOOK3S_XX */
-
-#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
#define VCPU_LOAD_NVGPRS(vcpu) \
PPC_LL r14, VCPU_GPR(R14)(vcpu); \
PPC_LL r15, VCPU_GPR(R15)(vcpu); \
Index: powerpc-test/arch/powerpc/kvm/booke_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/booke_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/booke_interrupts.S
@@ -25,8 +25,6 @@
#include <asm/page.h>
#include <asm/asm-offsets.h>
-#define VCPU_GPR(n) (VCPU_GPRS + (n * 4))
-
/* The host stack layout: */
#define HOST_R1 0 /* Implied by stwu. */
#define HOST_CALLEE_LR 4
Index: powerpc-test/arch/powerpc/kvm/bookehv_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/bookehv_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/bookehv_interrupts.S
@@ -37,7 +37,6 @@
#define LONGBYTES (BITS_PER_LONG / 8)
-#define VCPU_GPR(n) (VCPU_GPRS + (n * LONGBYTES))
#define VCPU_GUEST_SPRG(n) (VCPU_GUEST_SPRGS + (n * LONGBYTES))
/* The host stack layout: */
^ permalink raw reply
* [PATCH 7/18] powerpc: merge STK_REG/PARAM/FRAMESIZE
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Merge the defines of STACKFRAMESIZE, STK_REG, STK_PARAM from different
places.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc_asm.h | 5 +
arch/powerpc/lib/checksum_64.S | 3
arch/powerpc/lib/copypage_power7.S | 3
arch/powerpc/lib/copyuser_power7.S | 3
arch/powerpc/lib/memcpy_power7.S | 3
arch/powerpc/mm/hash_low_64.S | 88 +++++++++++--------------
arch/powerpc/platforms/cell/beat_hvCall.S | 28 +++----
arch/powerpc/platforms/powernv/opal-takeover.S | 2
arch/powerpc/platforms/pseries/hvCall.S | 72 +++++++++-----------
9 files changed, 93 insertions(+), 114 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -181,6 +181,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
+#define STACKFRAMESIZE 256
+#define STK_REG(i) (112 + ((i)-14)*8)
+
+#define STK_PARAM(i) (48 + ((i)-3)*8)
+
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
Index: powerpc-test/arch/powerpc/lib/checksum_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/checksum_64.S
+++ powerpc-test/arch/powerpc/lib/checksum_64.S
@@ -65,9 +65,6 @@ _GLOBAL(csum_tcpudp_magic)
srwi r3,r3,16
blr
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
/*
* Computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit).
Index: powerpc-test/arch/powerpc/lib/copypage_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copypage_power7.S
+++ powerpc-test/arch/powerpc/lib/copypage_power7.S
@@ -20,9 +20,6 @@
#include <asm/page.h>
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
_GLOBAL(copypage_power7)
/*
* We prefetch both the source and destination using enhanced touch
Index: powerpc-test/arch/powerpc/lib/copyuser_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copyuser_power7.S
+++ powerpc-test/arch/powerpc/lib/copyuser_power7.S
@@ -19,9 +19,6 @@
*/
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
.macro err1
100:
.section __ex_table,"a"
Index: powerpc-test/arch/powerpc/lib/memcpy_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/memcpy_power7.S
+++ powerpc-test/arch/powerpc/lib/memcpy_power7.S
@@ -19,9 +19,6 @@
*/
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
_GLOBAL(memcpy_power7)
#ifdef CONFIG_ALTIVEC
cmpldi r5,16
Index: powerpc-test/arch/powerpc/mm/hash_low_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/hash_low_64.S
+++ powerpc-test/arch/powerpc/mm/hash_low_64.S
@@ -34,14 +34,6 @@
* | CR save area (SP + 8)
* SP ---> +-- Back chain (SP + 0)
*/
-#define STACKFRAMESIZE 256
-
-/* Save parameters offsets */
-#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8)
-
-/* Save non-volatile offsets */
-#define STK_REG(i) (112 + ((i)-14)*8)
-
#ifndef CONFIG_PPC_64K_PAGES
@@ -64,9 +56,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -162,7 +154,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -192,11 +184,11 @@ htab_insert_pte:
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -215,11 +207,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -255,7 +247,7 @@ htab_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
htab_write_out_pte:
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
htab_bail:
@@ -288,8 +280,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* Patched by htab_finish_init() */
@@ -312,7 +304,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -340,9 +332,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -452,7 +444,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -473,7 +465,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
andis. r0,r31,_PAGE_COMBO@h
beq htab_inval_old_hpte
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
ori r26,r6,0x8000 /* Load the hidx mask */
ld r26,0(r26)
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
@@ -495,11 +487,11 @@ htab_special_pfn:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -522,11 +514,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -559,8 +551,8 @@ htab_inval_old_hpte:
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
- ld r7,STK_PARM(R9)(r1) /* ssize */
- ld r8,STK_PARM(R8)(r1) /* local */
+ ld r7,STK_PARAM(R9)(r1) /* ssize */
+ ld r8,STK_PARAM(R8)(r1) /* local */
bl .flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
@@ -576,7 +568,7 @@ htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE second half,
* clear _PAGE_BUSY and set approriate HPTE slot bit
*/
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
li r0,_PAGE_BUSY
andc r30,r30,r0
/* HPTE SUB bit */
@@ -630,8 +622,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -644,7 +636,7 @@ _GLOBAL(htab_call_hpte_updatepp)
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3,0
b htab_bail
@@ -657,7 +649,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -677,9 +669,9 @@ _GLOBAL(__hash_page_64K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -780,7 +772,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -813,11 +805,11 @@ ht64_insert_pte:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -836,11 +828,11 @@ _GLOBAL(ht64_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -876,7 +868,7 @@ ht64_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
ht64_write_out_pte:
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
ht64_bail:
@@ -909,8 +901,8 @@ ht64_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_64K
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(ht64_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -933,7 +925,7 @@ ht64_wrong_access:
ht64_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b ht64_bail
Index: powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/cell/beat_hvCall.S
+++ powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -22,8 +22,6 @@
#include <asm/ppc_asm.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
/* Not implemented on Beat, now */
#define HCALL_INST_PRECALL
#define HCALL_INST_POSTCALL
@@ -74,7 +72,7 @@ _GLOBAL(beat_hcall_norets8)
mr r6,r7
mr r7,r8
mr r8,r9
- ld r10,STK_PARM(R10)(r1)
+ ld r10,STK_PARAM(R10)(r1)
HVSC /* invoke the hypervisor */
@@ -94,7 +92,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -108,7 +106,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
lwz r0,8(r1)
@@ -125,7 +123,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -139,7 +137,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
@@ -157,7 +155,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -171,7 +169,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -190,7 +188,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -204,7 +202,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -224,7 +222,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -238,7 +236,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -259,7 +257,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -273,7 +271,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
Index: powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/powernv/opal-takeover.S
+++ powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -14,8 +14,6 @@
#include <asm/asm-offsets.h>
#include <asm/opal.h>
-#define STK_PARAM(i) (48 + ((i)-3)*8)
-
#define H_HAL_TAKEOVER 0x5124
#define H_HAL_TAKEOVER_QUERY_MAGIC -1
Index: powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/pseries/hvCall.S
+++ powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
@@ -13,8 +13,6 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
#ifdef CONFIG_TRACEPOINTS
.section ".toc","aw"
@@ -26,7 +24,7 @@ hcall_tracepoint_refcount:
.section ".text"
/*
- * precall must preserve all registers. use unused STK_PARM()
+ * precall must preserve all registers. use unused STK_PARAM()
* areas to save snapshots and opcode. We branch around this
* in early init (eg when populating the MMU hashtable) by using an
* unconditional cpu feature.
@@ -40,28 +38,28 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- std r3,STK_PARM(R3)(r1); \
- std r4,STK_PARM(R4)(r1); \
- std r5,STK_PARM(R5)(r1); \
- std r6,STK_PARM(R6)(r1); \
- std r7,STK_PARM(R7)(r1); \
- std r8,STK_PARM(R8)(r1); \
- std r9,STK_PARM(R9)(r1); \
- std r10,STK_PARM(R10)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
+ std r4,STK_PARAM(R4)(r1); \
+ std r5,STK_PARAM(R5)(r1); \
+ std r6,STK_PARAM(R6)(r1); \
+ std r7,STK_PARAM(R7)(r1); \
+ std r8,STK_PARAM(R8)(r1); \
+ std r9,STK_PARAM(R9)(r1); \
+ std r10,STK_PARAM(R10)(r1); \
std r0,16(r1); \
- addi r4,r1,STK_PARM(FIRST_REG); \
+ addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
bl .__trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(R3)(r1); \
- ld r4,STK_PARM(R4)(r1); \
- ld r5,STK_PARM(R5)(r1); \
- ld r6,STK_PARM(R6)(r1); \
- ld r7,STK_PARM(R7)(r1); \
- ld r8,STK_PARM(R8)(r1); \
- ld r9,STK_PARM(R9)(r1); \
- ld r10,STK_PARM(R10)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
+ ld r4,STK_PARAM(R4)(r1); \
+ ld r5,STK_PARAM(R5)(r1); \
+ ld r6,STK_PARAM(R6)(r1); \
+ ld r7,STK_PARAM(R7)(r1); \
+ ld r8,STK_PARAM(R8)(r1); \
+ ld r9,STK_PARAM(R9)(r1); \
+ ld r10,STK_PARAM(R10)(r1); \
mtlr r0; \
1:
@@ -79,8 +77,8 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- ld r6,STK_PARM(R3)(r1); \
- std r3,STK_PARM(R3)(r1); \
+ ld r6,STK_PARAM(R3)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
mr r4,r3; \
mr r3,r6; \
std r0,16(r1); \
@@ -88,7 +86,7 @@ END_FTR_SECTION(0, 1); \
bl .__trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(R3)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
mtlr r0; \
1:
@@ -132,7 +130,7 @@ _GLOBAL(plpar_hcall)
HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -143,7 +141,7 @@ _GLOBAL(plpar_hcall)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -168,7 +166,7 @@ _GLOBAL(plpar_hcall_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -179,7 +177,7 @@ _GLOBAL(plpar_hcall_raw)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -198,7 +196,7 @@ _GLOBAL(plpar_hcall9)
HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -206,14 +204,14 @@ _GLOBAL(plpar_hcall9)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -238,7 +236,7 @@ _GLOBAL(plpar_hcall9_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -246,14 +244,14 @@ _GLOBAL(plpar_hcall9_raw)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
^ permalink raw reply
* [PATCH 6/18] powerpc/pasemi: move lbz/stbciz to ppc-opcode.h
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
move lbz/stbciz to ppc-opcode.h.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 7 +++++++
arch/powerpc/kernel/misc_64.S | 5 -----
2 files changed, 7 insertions(+), 5 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -140,6 +140,8 @@
#define PPC_INST_NEG 0x7c0000d0
#define PPC_INST_BRANCH 0x48000000
#define PPC_INST_BRANCH_COND 0x40800000
+#define PPC_INST_LBZCIX 0x7c0006aa
+#define PPC_INST_STBCIX 0x7c0007aa
/* macros to insert fields into opcodes */
#define __PPC_RA(a) (((a) & 0x1f) << 16)
@@ -219,6 +221,11 @@
__PPC_RS(t) | __PPC_RA(a) | __PPC_RB(b))
#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \
__PPC_RT(t) | __PPC_RB(b))
+/* PASemi instructions */
+#define LBZCIX(t,a,b) stringify_in_c(.long PPC_INST_LBZCIX | \
+ __PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b))
+#define STBCIX(s,a,b) stringify_in_c(.long PPC_INST_STBCIX | \
+ __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b))
/*
* Define what the VSX XX1 form instructions will look like, then add
Index: powerpc-test/arch/powerpc/kernel/misc_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/misc_64.S
+++ powerpc-test/arch/powerpc/kernel/misc_64.S
@@ -301,11 +301,6 @@ _GLOBAL(real_writeb)
#ifdef CONFIG_PPC_PASEMI
-/* No support in all binutils for these yet, so use defines */
-#define LBZCIX(RT,RA,RB) .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11))
-#define STBCIX(RS,RA,RB) .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11))
-
-
_GLOBAL(real_205_readb)
mfmsr r7
ori r0,r7,MSR_DR
^ permalink raw reply
* [PATCH 5/18] powerpc: convert to %r for all GPR usage
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Now all the fixes are in place, let's rock-n-roll!
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc_asm.h | 72 ++++++++++++++++++++-----------------
1 file changed, 39 insertions(+), 33 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -490,40 +490,46 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define cr7 7
-/* General Purpose Registers (GPRs) */
+/*
+ * General Purpose Registers (GPRs)
+ *
+ * The lower case r0-r31 should be used in preference to the upper
+ * case R0-R31 as they provide more error checking in the assembler.
+ * Use R0-31 only when really nessesary.
+ */
-#define r0 0
-#define r1 1
-#define r2 2
-#define r3 3
-#define r4 4
-#define r5 5
-#define r6 6
-#define r7 7
-#define r8 8
-#define r9 9
-#define r10 10
-#define r11 11
-#define r12 12
-#define r13 13
-#define r14 14
-#define r15 15
-#define r16 16
-#define r17 17
-#define r18 18
-#define r19 19
-#define r20 20
-#define r21 21
-#define r22 22
-#define r23 23
-#define r24 24
-#define r25 25
-#define r26 26
-#define r27 27
-#define r28 28
-#define r29 29
-#define r30 30
-#define r31 31
+#define r0 %r0
+#define r1 %r1
+#define r2 %r2
+#define r3 %r3
+#define r4 %r4
+#define r5 %r5
+#define r6 %r6
+#define r7 %r7
+#define r8 %r8
+#define r9 %r9
+#define r10 %r10
+#define r11 %r11
+#define r12 %r12
+#define r13 %r13
+#define r14 %r14
+#define r15 %r15
+#define r16 %r16
+#define r17 %r17
+#define r18 %r18
+#define r19 %r19
+#define r20 %r20
+#define r21 %r21
+#define r22 %r22
+#define r23 %r23
+#define r24 %r24
+#define r25 %r25
+#define r26 %r26
+#define r27 %r27
+#define r28 %r28
+#define r29 %r29
+#define r30 %r30
+#define r31 %r31
/* Floating Point Registers (FPRs) */
^ permalink raw reply
* [PATCH 4/18] powerpc/kvm: sldi should be sld
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Since we are taking a registers, this should never have been an sldi.
Talking to paulus offline, this is the correct fix.
Was introduced by:
commit 19ccb76a1938ab364a412253daec64613acbf3df
Author: Paul Mackerras <paulus@samba.org>
Date: Sat Jul 23 17:42:46 2011 +1000
Talking to paulus, this shouldn't be a literal.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
^ permalink raw reply
* [PATCH 3/18] powerpc: fix usage of register macros getting ready for %r0 change
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Anything that uses a constructed instruction (ie. from ppc-opcode.h),
need to use the new R0 macro, as %r0 is not going to work.
Also convert usages of macros where we are just determining an offset
(usually for a load/store), like:
std r14,STK_REG(r14)(r1)
Can't use STK_REG(r14) as %r14 doesn't work in the STK_REG macro since
it's just calculating an offset.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/kernel/cpu_setup_a2.S | 6
arch/powerpc/kernel/fpu.S | 4
arch/powerpc/kernel/kvm.c | 2
arch/powerpc/kernel/misc_64.S | 4
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 218 ++++++++++----------
arch/powerpc/kvm/book3s_interrupts.S | 72 +++---
arch/powerpc/kvm/booke_interrupts.S | 272 ++++++++++++-------------
arch/powerpc/kvm/bookehv_interrupts.S | 220 ++++++++++----------
arch/powerpc/lib/checksum_64.S | 24 +-
arch/powerpc/lib/copypage_power7.S | 28 +-
arch/powerpc/lib/copyuser_64.S | 6
arch/powerpc/lib/copyuser_power7.S | 84 +++----
arch/powerpc/lib/hweight_64.S | 14 -
arch/powerpc/lib/ldstfp.S | 12 -
arch/powerpc/lib/mem_64.S | 6
arch/powerpc/lib/memcpy_64.S | 6
arch/powerpc/lib/memcpy_power7.S | 60 ++---
arch/powerpc/mm/hash_low_64.S | 148 ++++++-------
arch/powerpc/mm/tlb_low_64e.S | 10
arch/powerpc/mm/tlb_nohash_low.S | 6
arch/powerpc/platforms/cell/beat_hvCall.S | 26 +-
arch/powerpc/platforms/powernv/opal-takeover.S | 8
arch/powerpc/platforms/powernv/opal-wrappers.S | 2
arch/powerpc/platforms/pseries/hvCall.S | 72 +++---
24 files changed, 655 insertions(+), 655 deletions(-)
Index: powerpc-test/arch/powerpc/kernel/cpu_setup_a2.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/cpu_setup_a2.S
+++ powerpc-test/arch/powerpc/kernel/cpu_setup_a2.S
@@ -100,19 +100,19 @@ _icswx_skip_guest:
lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_IERAT_SIZE-1
- PPC_ERATWE(r4,r4,3)
+ PPC_ERATWE(R4,R4,3)
/* Now set the D-ERAT watermark to 31 */
lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
mtspr SPRN_MMUCR0, r4
li r4,A2_DERAT_SIZE-1
- PPC_ERATWE(r4,r4,3)
+ PPC_ERATWE(R4,R4,3)
/* And invalidate the beast just in case. That won't get rid of
* a bolted entry though it will be in LRU and so will go away eventually
* but let's not bother for now
*/
- PPC_ERATILX(0,0,0)
+ PPC_ERATILX(0,R0,R0)
1:
blr
Index: powerpc-test/arch/powerpc/kernel/fpu.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/fpu.S
+++ powerpc-test/arch/powerpc/kernel/fpu.S
@@ -106,7 +106,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
lfd fr0,THREAD_FPSCR(r5)
MTFSF_L(fr0)
- REST_32FPVSRS(0, r4, r5)
+ REST_32FPVSRS(0, R4, R5)
#ifndef CONFIG_SMP
subi r4,r5,THREAD
fromreal(r4)
@@ -140,7 +140,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
addi r3,r3,THREAD /* want THREAD of task */
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r5,0
- SAVE_32FPVSRS(0, r4 ,r3)
+ SAVE_32FPVSRS(0, R4 ,R3)
mffs fr0
stfd fr0,THREAD_FPSCR(r3)
beq 1f
Index: powerpc-test/arch/powerpc/kernel/kvm.c
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/kvm.c
+++ powerpc-test/arch/powerpc/kernel/kvm.c
@@ -302,7 +302,7 @@ static void kvm_patch_ins_wrtee(u32 *ins
if (imm_one) {
p[kvm_emulate_wrtee_reg_offs] =
- KVM_INST_LI | __PPC_RT(30) | MSR_EE;
+ KVM_INST_LI | __PPC_RT(R30) | MSR_EE;
} else {
/* Make clobbered registers work too */
switch (get_rt(rt)) {
Index: powerpc-test/arch/powerpc/kernel/misc_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kernel/misc_64.S
+++ powerpc-test/arch/powerpc/kernel/misc_64.S
@@ -314,7 +314,7 @@ _GLOBAL(real_205_readb)
mtmsrd r0
sync
isync
- LBZCIX(r3,0,r3)
+ LBZCIX(R3,0,R3)
isync
mtmsrd r7
sync
@@ -329,7 +329,7 @@ _GLOBAL(real_205_writeb)
mtmsrd r0
sync
isync
- STBCIX(r3,0,r4)
+ STBCIX(R3,0,R4)
isync
mtmsrd r7
sync
Index: powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ powerpc-test/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -206,24 +206,24 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
/* Load up FP, VMX and VSX registers */
bl kvmppc_load_fp
- ld r14, VCPU_GPR(r14)(r4)
- ld r15, VCPU_GPR(r15)(r4)
- ld r16, VCPU_GPR(r16)(r4)
- ld r17, VCPU_GPR(r17)(r4)
- ld r18, VCPU_GPR(r18)(r4)
- ld r19, VCPU_GPR(r19)(r4)
- ld r20, VCPU_GPR(r20)(r4)
- ld r21, VCPU_GPR(r21)(r4)
- ld r22, VCPU_GPR(r22)(r4)
- ld r23, VCPU_GPR(r23)(r4)
- ld r24, VCPU_GPR(r24)(r4)
- ld r25, VCPU_GPR(r25)(r4)
- ld r26, VCPU_GPR(r26)(r4)
- ld r27, VCPU_GPR(r27)(r4)
- ld r28, VCPU_GPR(r28)(r4)
- ld r29, VCPU_GPR(r29)(r4)
- ld r30, VCPU_GPR(r30)(r4)
- ld r31, VCPU_GPR(r31)(r4)
+ ld r14, VCPU_GPR(R14)(r4)
+ ld r15, VCPU_GPR(R15)(r4)
+ ld r16, VCPU_GPR(R16)(r4)
+ ld r17, VCPU_GPR(R17)(r4)
+ ld r18, VCPU_GPR(R18)(r4)
+ ld r19, VCPU_GPR(R19)(r4)
+ ld r20, VCPU_GPR(R20)(r4)
+ ld r21, VCPU_GPR(R21)(r4)
+ ld r22, VCPU_GPR(R22)(r4)
+ ld r23, VCPU_GPR(R23)(r4)
+ ld r24, VCPU_GPR(R24)(r4)
+ ld r25, VCPU_GPR(R25)(r4)
+ ld r26, VCPU_GPR(R26)(r4)
+ ld r27, VCPU_GPR(R27)(r4)
+ ld r28, VCPU_GPR(R28)(r4)
+ ld r29, VCPU_GPR(R29)(r4)
+ ld r30, VCPU_GPR(R30)(r4)
+ ld r31, VCPU_GPR(R31)(r4)
BEGIN_FTR_SECTION
/* Switch DSCR to guest value */
@@ -547,21 +547,21 @@ fast_guest_return:
mtlr r5
mtcr r6
- ld r0, VCPU_GPR(r0)(r4)
- ld r1, VCPU_GPR(r1)(r4)
- ld r2, VCPU_GPR(r2)(r4)
- ld r3, VCPU_GPR(r3)(r4)
- ld r5, VCPU_GPR(r5)(r4)
- ld r6, VCPU_GPR(r6)(r4)
- ld r7, VCPU_GPR(r7)(r4)
- ld r8, VCPU_GPR(r8)(r4)
- ld r9, VCPU_GPR(r9)(r4)
- ld r10, VCPU_GPR(r10)(r4)
- ld r11, VCPU_GPR(r11)(r4)
- ld r12, VCPU_GPR(r12)(r4)
- ld r13, VCPU_GPR(r13)(r4)
+ ld r0, VCPU_GPR(R0)(r4)
+ ld r1, VCPU_GPR(R1)(r4)
+ ld r2, VCPU_GPR(R2)(r4)
+ ld r3, VCPU_GPR(R3)(r4)
+ ld r5, VCPU_GPR(R5)(r4)
+ ld r6, VCPU_GPR(R6)(r4)
+ ld r7, VCPU_GPR(R7)(r4)
+ ld r8, VCPU_GPR(R8)(r4)
+ ld r9, VCPU_GPR(R9)(r4)
+ ld r10, VCPU_GPR(R10)(r4)
+ ld r11, VCPU_GPR(R11)(r4)
+ ld r12, VCPU_GPR(R12)(r4)
+ ld r13, VCPU_GPR(R13)(r4)
- ld r4, VCPU_GPR(r4)(r4)
+ ld r4, VCPU_GPR(R4)(r4)
hrfid
b .
@@ -590,22 +590,22 @@ kvmppc_interrupt:
/* Save registers */
- std r0, VCPU_GPR(r0)(r9)
- std r1, VCPU_GPR(r1)(r9)
- std r2, VCPU_GPR(r2)(r9)
- std r3, VCPU_GPR(r3)(r9)
- std r4, VCPU_GPR(r4)(r9)
- std r5, VCPU_GPR(r5)(r9)
- std r6, VCPU_GPR(r6)(r9)
- std r7, VCPU_GPR(r7)(r9)
- std r8, VCPU_GPR(r8)(r9)
+ std r0, VCPU_GPR(R0)(r9)
+ std r1, VCPU_GPR(R1)(r9)
+ std r2, VCPU_GPR(R2)(r9)
+ std r3, VCPU_GPR(R3)(r9)
+ std r4, VCPU_GPR(R4)(r9)
+ std r5, VCPU_GPR(R5)(r9)
+ std r6, VCPU_GPR(R6)(r9)
+ std r7, VCPU_GPR(R7)(r9)
+ std r8, VCPU_GPR(R8)(r9)
ld r0, HSTATE_HOST_R2(r13)
- std r0, VCPU_GPR(r9)(r9)
- std r10, VCPU_GPR(r10)(r9)
- std r11, VCPU_GPR(r11)(r9)
+ std r0, VCPU_GPR(R9)(r9)
+ std r10, VCPU_GPR(R10)(r9)
+ std r11, VCPU_GPR(R11)(r9)
ld r3, HSTATE_SCRATCH0(r13)
lwz r4, HSTATE_SCRATCH1(r13)
- std r3, VCPU_GPR(r12)(r9)
+ std r3, VCPU_GPR(R12)(r9)
stw r4, VCPU_CR(r9)
/* Restore R1/R2 so we can handle faults */
@@ -626,7 +626,7 @@ kvmppc_interrupt:
GET_SCRATCH0(r3)
mflr r4
- std r3, VCPU_GPR(r13)(r9)
+ std r3, VCPU_GPR(R13)(r9)
std r4, VCPU_LR(r9)
/* Unset guest mode */
@@ -968,24 +968,24 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
/* Save non-volatile GPRs */
- std r14, VCPU_GPR(r14)(r9)
- std r15, VCPU_GPR(r15)(r9)
- std r16, VCPU_GPR(r16)(r9)
- std r17, VCPU_GPR(r17)(r9)
- std r18, VCPU_GPR(r18)(r9)
- std r19, VCPU_GPR(r19)(r9)
- std r20, VCPU_GPR(r20)(r9)
- std r21, VCPU_GPR(r21)(r9)
- std r22, VCPU_GPR(r22)(r9)
- std r23, VCPU_GPR(r23)(r9)
- std r24, VCPU_GPR(r24)(r9)
- std r25, VCPU_GPR(r25)(r9)
- std r26, VCPU_GPR(r26)(r9)
- std r27, VCPU_GPR(r27)(r9)
- std r28, VCPU_GPR(r28)(r9)
- std r29, VCPU_GPR(r29)(r9)
- std r30, VCPU_GPR(r30)(r9)
- std r31, VCPU_GPR(r31)(r9)
+ std r14, VCPU_GPR(R14)(r9)
+ std r15, VCPU_GPR(R15)(r9)
+ std r16, VCPU_GPR(R16)(r9)
+ std r17, VCPU_GPR(R17)(r9)
+ std r18, VCPU_GPR(R18)(r9)
+ std r19, VCPU_GPR(R19)(r9)
+ std r20, VCPU_GPR(R20)(r9)
+ std r21, VCPU_GPR(R21)(r9)
+ std r22, VCPU_GPR(R22)(r9)
+ std r23, VCPU_GPR(R23)(r9)
+ std r24, VCPU_GPR(R24)(r9)
+ std r25, VCPU_GPR(R25)(r9)
+ std r26, VCPU_GPR(R26)(r9)
+ std r27, VCPU_GPR(R27)(r9)
+ std r28, VCPU_GPR(R28)(r9)
+ std r29, VCPU_GPR(R29)(r9)
+ std r30, VCPU_GPR(R30)(r9)
+ std r31, VCPU_GPR(R31)(r9)
/* Save SPRGs */
mfspr r3, SPRN_SPRG0
@@ -1160,7 +1160,7 @@ kvmppc_hdsi:
andi. r0, r11, MSR_DR /* data relocation enabled? */
beq 3f
clrrdi r0, r4, 28
- PPC_SLBFEE_DOT(r5, r0) /* if so, look up SLB */
+ PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
bne 1f /* if no SLB entry found */
4: std r4, VCPU_FAULT_DAR(r9)
stw r6, VCPU_FAULT_DSISR(r9)
@@ -1234,7 +1234,7 @@ kvmppc_hisi:
andi. r0, r11, MSR_IR /* instruction relocation enabled? */
beq 3f
clrrdi r0, r10, 28
- PPC_SLBFEE_DOT(r5, r0) /* if so, look up SLB */
+ PPC_SLBFEE_DOT(R5, R0) /* if so, look up SLB */
bne 1f /* if no SLB entry found */
4:
/* Search the hash table. */
@@ -1278,7 +1278,7 @@ kvmppc_hisi:
*/
.globl hcall_try_real_mode
hcall_try_real_mode:
- ld r3,VCPU_GPR(r3)(r9)
+ ld r3,VCPU_GPR(R3)(r9)
andi. r0,r11,MSR_PR
bne hcall_real_cont
clrrdi r3,r3,2
@@ -1291,12 +1291,12 @@ hcall_try_real_mode:
add r3,r3,r4
mtctr r3
mr r3,r9 /* get vcpu pointer */
- ld r4,VCPU_GPR(r4)(r9)
+ ld r4,VCPU_GPR(R4)(r9)
bctrl
cmpdi r3,H_TOO_HARD
beq hcall_real_fallback
ld r4,HSTATE_KVM_VCPU(r13)
- std r3,VCPU_GPR(r3)(r4)
+ std r3,VCPU_GPR(R3)(r4)
ld r10,VCPU_PC(r4)
ld r11,VCPU_MSR(r4)
b fast_guest_return
@@ -1424,7 +1424,7 @@ _GLOBAL(kvmppc_h_cede)
li r0,0 /* set trap to 0 to say hcall is handled */
stw r0,VCPU_TRAP(r3)
li r0,H_SUCCESS
- std r0,VCPU_GPR(r3)(r3)
+ std r0,VCPU_GPR(R3)(r3)
BEGIN_FTR_SECTION
b 2f /* just send it up to host on 970 */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
@@ -1443,7 +1443,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
- PPC_POPCNTW(r7,r4)
+ PPC_POPCNTW(R7,R4)
cmpw r7,r8
bge 2f
stwcx. r4,0,r6
@@ -1464,24 +1464,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206)
* DAR, DSISR, DABR, DABRX, DSCR, PMCx, MMCRx, SIAR, SDAR.
*/
/* Save non-volatile GPRs */
- std r14, VCPU_GPR(r14)(r3)
- std r15, VCPU_GPR(r15)(r3)
- std r16, VCPU_GPR(r16)(r3)
- std r17, VCPU_GPR(r17)(r3)
- std r18, VCPU_GPR(r18)(r3)
- std r19, VCPU_GPR(r19)(r3)
- std r20, VCPU_GPR(r20)(r3)
- std r21, VCPU_GPR(r21)(r3)
- std r22, VCPU_GPR(r22)(r3)
- std r23, VCPU_GPR(r23)(r3)
- std r24, VCPU_GPR(r24)(r3)
- std r25, VCPU_GPR(r25)(r3)
- std r26, VCPU_GPR(r26)(r3)
- std r27, VCPU_GPR(r27)(r3)
- std r28, VCPU_GPR(r28)(r3)
- std r29, VCPU_GPR(r29)(r3)
- std r30, VCPU_GPR(r30)(r3)
- std r31, VCPU_GPR(r31)(r3)
+ std r14, VCPU_GPR(R14)(r3)
+ std r15, VCPU_GPR(R15)(r3)
+ std r16, VCPU_GPR(R16)(r3)
+ std r17, VCPU_GPR(R17)(r3)
+ std r18, VCPU_GPR(R18)(r3)
+ std r19, VCPU_GPR(R19)(r3)
+ std r20, VCPU_GPR(R20)(r3)
+ std r21, VCPU_GPR(R21)(r3)
+ std r22, VCPU_GPR(R22)(r3)
+ std r23, VCPU_GPR(R23)(r3)
+ std r24, VCPU_GPR(R24)(r3)
+ std r25, VCPU_GPR(R25)(r3)
+ std r26, VCPU_GPR(R26)(r3)
+ std r27, VCPU_GPR(R27)(r3)
+ std r28, VCPU_GPR(R28)(r3)
+ std r29, VCPU_GPR(R29)(r3)
+ std r30, VCPU_GPR(R30)(r3)
+ std r31, VCPU_GPR(R31)(r3)
/* save FP state */
bl .kvmppc_save_fp
@@ -1513,24 +1513,24 @@ kvm_end_cede:
bl kvmppc_load_fp
/* Load NV GPRS */
- ld r14, VCPU_GPR(r14)(r4)
- ld r15, VCPU_GPR(r15)(r4)
- ld r16, VCPU_GPR(r16)(r4)
- ld r17, VCPU_GPR(r17)(r4)
- ld r18, VCPU_GPR(r18)(r4)
- ld r19, VCPU_GPR(r19)(r4)
- ld r20, VCPU_GPR(r20)(r4)
- ld r21, VCPU_GPR(r21)(r4)
- ld r22, VCPU_GPR(r22)(r4)
- ld r23, VCPU_GPR(r23)(r4)
- ld r24, VCPU_GPR(r24)(r4)
- ld r25, VCPU_GPR(r25)(r4)
- ld r26, VCPU_GPR(r26)(r4)
- ld r27, VCPU_GPR(r27)(r4)
- ld r28, VCPU_GPR(r28)(r4)
- ld r29, VCPU_GPR(r29)(r4)
- ld r30, VCPU_GPR(r30)(r4)
- ld r31, VCPU_GPR(r31)(r4)
+ ld r14, VCPU_GPR(R14)(r4)
+ ld r15, VCPU_GPR(R15)(r4)
+ ld r16, VCPU_GPR(R16)(r4)
+ ld r17, VCPU_GPR(R17)(r4)
+ ld r18, VCPU_GPR(R18)(r4)
+ ld r19, VCPU_GPR(R19)(r4)
+ ld r20, VCPU_GPR(R20)(r4)
+ ld r21, VCPU_GPR(R21)(r4)
+ ld r22, VCPU_GPR(R22)(r4)
+ ld r23, VCPU_GPR(R23)(r4)
+ ld r24, VCPU_GPR(R24)(r4)
+ ld r25, VCPU_GPR(R25)(r4)
+ ld r26, VCPU_GPR(R26)(r4)
+ ld r27, VCPU_GPR(R27)(r4)
+ ld r28, VCPU_GPR(R28)(r4)
+ ld r29, VCPU_GPR(R29)(r4)
+ ld r30, VCPU_GPR(R30)(r4)
+ ld r31, VCPU_GPR(R31)(r4)
/* clear our bit in vcore->napping_threads */
33: ld r5,HSTATE_KVM_VCORE(r13)
@@ -1649,7 +1649,7 @@ BEGIN_FTR_SECTION
reg = 0
.rept 32
li r6,reg*16+VCPU_VSRS
- STXVD2X(reg,r6,r3)
+ STXVD2X(reg,R6,R3)
reg = reg + 1
.endr
FTR_SECTION_ELSE
@@ -1711,7 +1711,7 @@ BEGIN_FTR_SECTION
reg = 0
.rept 32
li r7,reg*16+VCPU_VSRS
- LXVD2X(reg,r7,r4)
+ LXVD2X(reg,R7,R4)
reg = reg + 1
.endr
FTR_SECTION_ELSE
Index: powerpc-test/arch/powerpc/kvm/book3s_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/book3s_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/book3s_interrupts.S
@@ -39,24 +39,24 @@
#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
#define VCPU_LOAD_NVGPRS(vcpu) \
- PPC_LL r14, VCPU_GPR(r14)(vcpu); \
- PPC_LL r15, VCPU_GPR(r15)(vcpu); \
- PPC_LL r16, VCPU_GPR(r16)(vcpu); \
- PPC_LL r17, VCPU_GPR(r17)(vcpu); \
- PPC_LL r18, VCPU_GPR(r18)(vcpu); \
- PPC_LL r19, VCPU_GPR(r19)(vcpu); \
- PPC_LL r20, VCPU_GPR(r20)(vcpu); \
- PPC_LL r21, VCPU_GPR(r21)(vcpu); \
- PPC_LL r22, VCPU_GPR(r22)(vcpu); \
- PPC_LL r23, VCPU_GPR(r23)(vcpu); \
- PPC_LL r24, VCPU_GPR(r24)(vcpu); \
- PPC_LL r25, VCPU_GPR(r25)(vcpu); \
- PPC_LL r26, VCPU_GPR(r26)(vcpu); \
- PPC_LL r27, VCPU_GPR(r27)(vcpu); \
- PPC_LL r28, VCPU_GPR(r28)(vcpu); \
- PPC_LL r29, VCPU_GPR(r29)(vcpu); \
- PPC_LL r30, VCPU_GPR(r30)(vcpu); \
- PPC_LL r31, VCPU_GPR(r31)(vcpu); \
+ PPC_LL r14, VCPU_GPR(R14)(vcpu); \
+ PPC_LL r15, VCPU_GPR(R15)(vcpu); \
+ PPC_LL r16, VCPU_GPR(R16)(vcpu); \
+ PPC_LL r17, VCPU_GPR(R17)(vcpu); \
+ PPC_LL r18, VCPU_GPR(R18)(vcpu); \
+ PPC_LL r19, VCPU_GPR(R19)(vcpu); \
+ PPC_LL r20, VCPU_GPR(R20)(vcpu); \
+ PPC_LL r21, VCPU_GPR(R21)(vcpu); \
+ PPC_LL r22, VCPU_GPR(R22)(vcpu); \
+ PPC_LL r23, VCPU_GPR(R23)(vcpu); \
+ PPC_LL r24, VCPU_GPR(R24)(vcpu); \
+ PPC_LL r25, VCPU_GPR(R25)(vcpu); \
+ PPC_LL r26, VCPU_GPR(R26)(vcpu); \
+ PPC_LL r27, VCPU_GPR(R27)(vcpu); \
+ PPC_LL r28, VCPU_GPR(R28)(vcpu); \
+ PPC_LL r29, VCPU_GPR(R29)(vcpu); \
+ PPC_LL r30, VCPU_GPR(R30)(vcpu); \
+ PPC_LL r31, VCPU_GPR(R31)(vcpu); \
/*****************************************************************************
* *
@@ -131,24 +131,24 @@ kvmppc_handler_highmem:
/* R7 = vcpu */
PPC_LL r7, GPR4(r1)
- PPC_STL r14, VCPU_GPR(r14)(r7)
- PPC_STL r15, VCPU_GPR(r15)(r7)
- PPC_STL r16, VCPU_GPR(r16)(r7)
- PPC_STL r17, VCPU_GPR(r17)(r7)
- PPC_STL r18, VCPU_GPR(r18)(r7)
- PPC_STL r19, VCPU_GPR(r19)(r7)
- PPC_STL r20, VCPU_GPR(r20)(r7)
- PPC_STL r21, VCPU_GPR(r21)(r7)
- PPC_STL r22, VCPU_GPR(r22)(r7)
- PPC_STL r23, VCPU_GPR(r23)(r7)
- PPC_STL r24, VCPU_GPR(r24)(r7)
- PPC_STL r25, VCPU_GPR(r25)(r7)
- PPC_STL r26, VCPU_GPR(r26)(r7)
- PPC_STL r27, VCPU_GPR(r27)(r7)
- PPC_STL r28, VCPU_GPR(r28)(r7)
- PPC_STL r29, VCPU_GPR(r29)(r7)
- PPC_STL r30, VCPU_GPR(r30)(r7)
- PPC_STL r31, VCPU_GPR(r31)(r7)
+ PPC_STL r14, VCPU_GPR(R14)(r7)
+ PPC_STL r15, VCPU_GPR(R15)(r7)
+ PPC_STL r16, VCPU_GPR(R16)(r7)
+ PPC_STL r17, VCPU_GPR(R17)(r7)
+ PPC_STL r18, VCPU_GPR(R18)(r7)
+ PPC_STL r19, VCPU_GPR(R19)(r7)
+ PPC_STL r20, VCPU_GPR(R20)(r7)
+ PPC_STL r21, VCPU_GPR(R21)(r7)
+ PPC_STL r22, VCPU_GPR(R22)(r7)
+ PPC_STL r23, VCPU_GPR(R23)(r7)
+ PPC_STL r24, VCPU_GPR(R24)(r7)
+ PPC_STL r25, VCPU_GPR(R25)(r7)
+ PPC_STL r26, VCPU_GPR(R26)(r7)
+ PPC_STL r27, VCPU_GPR(R27)(r7)
+ PPC_STL r28, VCPU_GPR(R28)(r7)
+ PPC_STL r29, VCPU_GPR(R29)(r7)
+ PPC_STL r30, VCPU_GPR(R30)(r7)
+ PPC_STL r31, VCPU_GPR(R31)(r7)
/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
mr r5, r12
Index: powerpc-test/arch/powerpc/kvm/booke_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/booke_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/booke_interrupts.S
@@ -37,7 +37,7 @@
#define HOST_CR 16
#define HOST_NV_GPRS 20
#define HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4))
-#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(31) + 4)
+#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(R31) + 4)
#define HOST_STACK_SIZE (((HOST_MIN_STACK_SIZE + 15) / 16) * 16) /* Align. */
#define HOST_STACK_LR (HOST_STACK_SIZE + 4) /* In caller stack frame. */
@@ -58,8 +58,8 @@ _GLOBAL(kvmppc_handler_\ivor_nr)
/* Get pointer to vcpu and record exit number. */
mtspr SPRN_SPRG_WSCRATCH0, r4
mfspr r4, SPRN_SPRG_RVCPU
- stw r5, VCPU_GPR(r5)(r4)
- stw r6, VCPU_GPR(r6)(r4)
+ stw r5, VCPU_GPR(R5)(r4)
+ stw r6, VCPU_GPR(R6)(r4)
mfctr r5
lis r6, kvmppc_resume_host@h
stw r5, VCPU_CTR(r4)
@@ -100,12 +100,12 @@ _GLOBAL(kvmppc_handler_len)
* r5: KVM exit number
*/
_GLOBAL(kvmppc_resume_host)
- stw r3, VCPU_GPR(r3)(r4)
+ stw r3, VCPU_GPR(R3)(r4)
mfcr r3
stw r3, VCPU_CR(r4)
- stw r7, VCPU_GPR(r7)(r4)
- stw r8, VCPU_GPR(r8)(r4)
- stw r9, VCPU_GPR(r9)(r4)
+ stw r7, VCPU_GPR(R7)(r4)
+ stw r8, VCPU_GPR(R8)(r4)
+ stw r9, VCPU_GPR(R9)(r4)
li r6, 1
slw r6, r6, r5
@@ -135,23 +135,23 @@ _GLOBAL(kvmppc_resume_host)
isync
stw r9, VCPU_LAST_INST(r4)
- stw r15, VCPU_GPR(r15)(r4)
- stw r16, VCPU_GPR(r16)(r4)
- stw r17, VCPU_GPR(r17)(r4)
- stw r18, VCPU_GPR(r18)(r4)
- stw r19, VCPU_GPR(r19)(r4)
- stw r20, VCPU_GPR(r20)(r4)
- stw r21, VCPU_GPR(r21)(r4)
- stw r22, VCPU_GPR(r22)(r4)
- stw r23, VCPU_GPR(r23)(r4)
- stw r24, VCPU_GPR(r24)(r4)
- stw r25, VCPU_GPR(r25)(r4)
- stw r26, VCPU_GPR(r26)(r4)
- stw r27, VCPU_GPR(r27)(r4)
- stw r28, VCPU_GPR(r28)(r4)
- stw r29, VCPU_GPR(r29)(r4)
- stw r30, VCPU_GPR(r30)(r4)
- stw r31, VCPU_GPR(r31)(r4)
+ stw r15, VCPU_GPR(R15)(r4)
+ stw r16, VCPU_GPR(R16)(r4)
+ stw r17, VCPU_GPR(R17)(r4)
+ stw r18, VCPU_GPR(R18)(r4)
+ stw r19, VCPU_GPR(R19)(r4)
+ stw r20, VCPU_GPR(R20)(r4)
+ stw r21, VCPU_GPR(R21)(r4)
+ stw r22, VCPU_GPR(R22)(r4)
+ stw r23, VCPU_GPR(R23)(r4)
+ stw r24, VCPU_GPR(R24)(r4)
+ stw r25, VCPU_GPR(R25)(r4)
+ stw r26, VCPU_GPR(R26)(r4)
+ stw r27, VCPU_GPR(R27)(r4)
+ stw r28, VCPU_GPR(R28)(r4)
+ stw r29, VCPU_GPR(R29)(r4)
+ stw r30, VCPU_GPR(R30)(r4)
+ stw r31, VCPU_GPR(R31)(r4)
..skip_inst_copy:
/* Also grab DEAR and ESR before the host can clobber them. */
@@ -169,20 +169,20 @@ _GLOBAL(kvmppc_resume_host)
..skip_esr:
/* Save remaining volatile guest register state to vcpu. */
- stw r0, VCPU_GPR(r0)(r4)
- stw r1, VCPU_GPR(r1)(r4)
- stw r2, VCPU_GPR(r2)(r4)
- stw r10, VCPU_GPR(r10)(r4)
- stw r11, VCPU_GPR(r11)(r4)
- stw r12, VCPU_GPR(r12)(r4)
- stw r13, VCPU_GPR(r13)(r4)
- stw r14, VCPU_GPR(r14)(r4) /* We need a NV GPR below. */
+ stw r0, VCPU_GPR(R0)(r4)
+ stw r1, VCPU_GPR(R1)(r4)
+ stw r2, VCPU_GPR(R2)(r4)
+ stw r10, VCPU_GPR(R10)(r4)
+ stw r11, VCPU_GPR(R11)(r4)
+ stw r12, VCPU_GPR(R12)(r4)
+ stw r13, VCPU_GPR(R13)(r4)
+ stw r14, VCPU_GPR(R14)(r4) /* We need a NV GPR below. */
mflr r3
stw r3, VCPU_LR(r4)
mfxer r3
stw r3, VCPU_XER(r4)
mfspr r3, SPRN_SPRG_RSCRATCH0
- stw r3, VCPU_GPR(r4)(r4)
+ stw r3, VCPU_GPR(R4)(r4)
mfspr r3, SPRN_SRR0
stw r3, VCPU_PC(r4)
@@ -214,28 +214,28 @@ _GLOBAL(kvmppc_resume_host)
/* Restore vcpu pointer and the nonvolatiles we used. */
mr r4, r14
- lwz r14, VCPU_GPR(r14)(r4)
+ lwz r14, VCPU_GPR(R14)(r4)
/* Sometimes instruction emulation must restore complete GPR state. */
andi. r5, r3, RESUME_FLAG_NV
beq ..skip_nv_load
- lwz r15, VCPU_GPR(r15)(r4)
- lwz r16, VCPU_GPR(r16)(r4)
- lwz r17, VCPU_GPR(r17)(r4)
- lwz r18, VCPU_GPR(r18)(r4)
- lwz r19, VCPU_GPR(r19)(r4)
- lwz r20, VCPU_GPR(r20)(r4)
- lwz r21, VCPU_GPR(r21)(r4)
- lwz r22, VCPU_GPR(r22)(r4)
- lwz r23, VCPU_GPR(r23)(r4)
- lwz r24, VCPU_GPR(r24)(r4)
- lwz r25, VCPU_GPR(r25)(r4)
- lwz r26, VCPU_GPR(r26)(r4)
- lwz r27, VCPU_GPR(r27)(r4)
- lwz r28, VCPU_GPR(r28)(r4)
- lwz r29, VCPU_GPR(r29)(r4)
- lwz r30, VCPU_GPR(r30)(r4)
- lwz r31, VCPU_GPR(r31)(r4)
+ lwz r15, VCPU_GPR(R15)(r4)
+ lwz r16, VCPU_GPR(R16)(r4)
+ lwz r17, VCPU_GPR(R17)(r4)
+ lwz r18, VCPU_GPR(R18)(r4)
+ lwz r19, VCPU_GPR(R19)(r4)
+ lwz r20, VCPU_GPR(R20)(r4)
+ lwz r21, VCPU_GPR(R21)(r4)
+ lwz r22, VCPU_GPR(R22)(r4)
+ lwz r23, VCPU_GPR(R23)(r4)
+ lwz r24, VCPU_GPR(R24)(r4)
+ lwz r25, VCPU_GPR(R25)(r4)
+ lwz r26, VCPU_GPR(R26)(r4)
+ lwz r27, VCPU_GPR(R27)(r4)
+ lwz r28, VCPU_GPR(R28)(r4)
+ lwz r29, VCPU_GPR(R29)(r4)
+ lwz r30, VCPU_GPR(R30)(r4)
+ lwz r31, VCPU_GPR(R31)(r4)
..skip_nv_load:
/* Should we return to the guest? */
@@ -257,43 +257,43 @@ heavyweight_exit:
/* We already saved guest volatile register state; now save the
* non-volatiles. */
- stw r15, VCPU_GPR(r15)(r4)
- stw r16, VCPU_GPR(r16)(r4)
- stw r17, VCPU_GPR(r17)(r4)
- stw r18, VCPU_GPR(r18)(r4)
- stw r19, VCPU_GPR(r19)(r4)
- stw r20, VCPU_GPR(r20)(r4)
- stw r21, VCPU_GPR(r21)(r4)
- stw r22, VCPU_GPR(r22)(r4)
- stw r23, VCPU_GPR(r23)(r4)
- stw r24, VCPU_GPR(r24)(r4)
- stw r25, VCPU_GPR(r25)(r4)
- stw r26, VCPU_GPR(r26)(r4)
- stw r27, VCPU_GPR(r27)(r4)
- stw r28, VCPU_GPR(r28)(r4)
- stw r29, VCPU_GPR(r29)(r4)
- stw r30, VCPU_GPR(r30)(r4)
- stw r31, VCPU_GPR(r31)(r4)
+ stw r15, VCPU_GPR(R15)(r4)
+ stw r16, VCPU_GPR(R16)(r4)
+ stw r17, VCPU_GPR(R17)(r4)
+ stw r18, VCPU_GPR(R18)(r4)
+ stw r19, VCPU_GPR(R19)(r4)
+ stw r20, VCPU_GPR(R20)(r4)
+ stw r21, VCPU_GPR(R21)(r4)
+ stw r22, VCPU_GPR(R22)(r4)
+ stw r23, VCPU_GPR(R23)(r4)
+ stw r24, VCPU_GPR(R24)(r4)
+ stw r25, VCPU_GPR(R25)(r4)
+ stw r26, VCPU_GPR(R26)(r4)
+ stw r27, VCPU_GPR(R27)(r4)
+ stw r28, VCPU_GPR(R28)(r4)
+ stw r29, VCPU_GPR(R29)(r4)
+ stw r30, VCPU_GPR(R30)(r4)
+ stw r31, VCPU_GPR(R31)(r4)
/* Load host non-volatile register state from host stack. */
- lwz r14, HOST_NV_GPR(r14)(r1)
- lwz r15, HOST_NV_GPR(r15)(r1)
- lwz r16, HOST_NV_GPR(r16)(r1)
- lwz r17, HOST_NV_GPR(r17)(r1)
- lwz r18, HOST_NV_GPR(r18)(r1)
- lwz r19, HOST_NV_GPR(r19)(r1)
- lwz r20, HOST_NV_GPR(r20)(r1)
- lwz r21, HOST_NV_GPR(r21)(r1)
- lwz r22, HOST_NV_GPR(r22)(r1)
- lwz r23, HOST_NV_GPR(r23)(r1)
- lwz r24, HOST_NV_GPR(r24)(r1)
- lwz r25, HOST_NV_GPR(r25)(r1)
- lwz r26, HOST_NV_GPR(r26)(r1)
- lwz r27, HOST_NV_GPR(r27)(r1)
- lwz r28, HOST_NV_GPR(r28)(r1)
- lwz r29, HOST_NV_GPR(r29)(r1)
- lwz r30, HOST_NV_GPR(r30)(r1)
- lwz r31, HOST_NV_GPR(r31)(r1)
+ lwz r14, HOST_NV_GPR(R14)(r1)
+ lwz r15, HOST_NV_GPR(R15)(r1)
+ lwz r16, HOST_NV_GPR(R16)(r1)
+ lwz r17, HOST_NV_GPR(R17)(r1)
+ lwz r18, HOST_NV_GPR(R18)(r1)
+ lwz r19, HOST_NV_GPR(R19)(r1)
+ lwz r20, HOST_NV_GPR(R20)(r1)
+ lwz r21, HOST_NV_GPR(R21)(r1)
+ lwz r22, HOST_NV_GPR(R22)(r1)
+ lwz r23, HOST_NV_GPR(R23)(r1)
+ lwz r24, HOST_NV_GPR(R24)(r1)
+ lwz r25, HOST_NV_GPR(R25)(r1)
+ lwz r26, HOST_NV_GPR(R26)(r1)
+ lwz r27, HOST_NV_GPR(R27)(r1)
+ lwz r28, HOST_NV_GPR(R28)(r1)
+ lwz r29, HOST_NV_GPR(R29)(r1)
+ lwz r30, HOST_NV_GPR(R30)(r1)
+ lwz r31, HOST_NV_GPR(R31)(r1)
/* Return to kvm_vcpu_run(). */
lwz r4, HOST_STACK_LR(r1)
@@ -321,44 +321,44 @@ _GLOBAL(__kvmppc_vcpu_run)
stw r5, HOST_CR(r1)
/* Save host non-volatile register state to stack. */
- stw r14, HOST_NV_GPR(r14)(r1)
- stw r15, HOST_NV_GPR(r15)(r1)
- stw r16, HOST_NV_GPR(r16)(r1)
- stw r17, HOST_NV_GPR(r17)(r1)
- stw r18, HOST_NV_GPR(r18)(r1)
- stw r19, HOST_NV_GPR(r19)(r1)
- stw r20, HOST_NV_GPR(r20)(r1)
- stw r21, HOST_NV_GPR(r21)(r1)
- stw r22, HOST_NV_GPR(r22)(r1)
- stw r23, HOST_NV_GPR(r23)(r1)
- stw r24, HOST_NV_GPR(r24)(r1)
- stw r25, HOST_NV_GPR(r25)(r1)
- stw r26, HOST_NV_GPR(r26)(r1)
- stw r27, HOST_NV_GPR(r27)(r1)
- stw r28, HOST_NV_GPR(r28)(r1)
- stw r29, HOST_NV_GPR(r29)(r1)
- stw r30, HOST_NV_GPR(r30)(r1)
- stw r31, HOST_NV_GPR(r31)(r1)
+ stw r14, HOST_NV_GPR(R14)(r1)
+ stw r15, HOST_NV_GPR(R15)(r1)
+ stw r16, HOST_NV_GPR(R16)(r1)
+ stw r17, HOST_NV_GPR(R17)(r1)
+ stw r18, HOST_NV_GPR(R18)(r1)
+ stw r19, HOST_NV_GPR(R19)(r1)
+ stw r20, HOST_NV_GPR(R20)(r1)
+ stw r21, HOST_NV_GPR(R21)(r1)
+ stw r22, HOST_NV_GPR(R22)(r1)
+ stw r23, HOST_NV_GPR(R23)(r1)
+ stw r24, HOST_NV_GPR(R24)(r1)
+ stw r25, HOST_NV_GPR(R25)(r1)
+ stw r26, HOST_NV_GPR(R26)(r1)
+ stw r27, HOST_NV_GPR(R27)(r1)
+ stw r28, HOST_NV_GPR(R28)(r1)
+ stw r29, HOST_NV_GPR(R29)(r1)
+ stw r30, HOST_NV_GPR(R30)(r1)
+ stw r31, HOST_NV_GPR(R31)(r1)
/* Load guest non-volatiles. */
- lwz r14, VCPU_GPR(r14)(r4)
- lwz r15, VCPU_GPR(r15)(r4)
- lwz r16, VCPU_GPR(r16)(r4)
- lwz r17, VCPU_GPR(r17)(r4)
- lwz r18, VCPU_GPR(r18)(r4)
- lwz r19, VCPU_GPR(r19)(r4)
- lwz r20, VCPU_GPR(r20)(r4)
- lwz r21, VCPU_GPR(r21)(r4)
- lwz r22, VCPU_GPR(r22)(r4)
- lwz r23, VCPU_GPR(r23)(r4)
- lwz r24, VCPU_GPR(r24)(r4)
- lwz r25, VCPU_GPR(r25)(r4)
- lwz r26, VCPU_GPR(r26)(r4)
- lwz r27, VCPU_GPR(r27)(r4)
- lwz r28, VCPU_GPR(r28)(r4)
- lwz r29, VCPU_GPR(r29)(r4)
- lwz r30, VCPU_GPR(r30)(r4)
- lwz r31, VCPU_GPR(r31)(r4)
+ lwz r14, VCPU_GPR(R14)(r4)
+ lwz r15, VCPU_GPR(R15)(r4)
+ lwz r16, VCPU_GPR(R16)(r4)
+ lwz r17, VCPU_GPR(R17)(r4)
+ lwz r18, VCPU_GPR(R18)(r4)
+ lwz r19, VCPU_GPR(R19)(r4)
+ lwz r20, VCPU_GPR(R20)(r4)
+ lwz r21, VCPU_GPR(R21)(r4)
+ lwz r22, VCPU_GPR(R22)(r4)
+ lwz r23, VCPU_GPR(R23)(r4)
+ lwz r24, VCPU_GPR(R24)(r4)
+ lwz r25, VCPU_GPR(R25)(r4)
+ lwz r26, VCPU_GPR(R26)(r4)
+ lwz r27, VCPU_GPR(R27)(r4)
+ lwz r28, VCPU_GPR(R28)(r4)
+ lwz r29, VCPU_GPR(R29)(r4)
+ lwz r30, VCPU_GPR(R30)(r4)
+ lwz r31, VCPU_GPR(R31)(r4)
#ifdef CONFIG_SPE
/* save host SPEFSCR and load guest SPEFSCR */
@@ -386,13 +386,13 @@ lightweight_exit:
#endif
/* Load some guest volatiles. */
- lwz r0, VCPU_GPR(r0)(r4)
- lwz r2, VCPU_GPR(r2)(r4)
- lwz r9, VCPU_GPR(r9)(r4)
- lwz r10, VCPU_GPR(r10)(r4)
- lwz r11, VCPU_GPR(r11)(r4)
- lwz r12, VCPU_GPR(r12)(r4)
- lwz r13, VCPU_GPR(r13)(r4)
+ lwz r0, VCPU_GPR(R0)(r4)
+ lwz r2, VCPU_GPR(R2)(r4)
+ lwz r9, VCPU_GPR(R9)(r4)
+ lwz r10, VCPU_GPR(R10)(r4)
+ lwz r11, VCPU_GPR(R11)(r4)
+ lwz r12, VCPU_GPR(R12)(r4)
+ lwz r13, VCPU_GPR(R13)(r4)
lwz r3, VCPU_LR(r4)
mtlr r3
lwz r3, VCPU_XER(r4)
@@ -411,7 +411,7 @@ lightweight_exit:
/* Can't switch the stack pointer until after IVPR is switched,
* because host interrupt handlers would get confused. */
- lwz r1, VCPU_GPR(r1)(r4)
+ lwz r1, VCPU_GPR(R1)(r4)
/*
* Host interrupt handlers may have clobbered these
@@ -449,10 +449,10 @@ lightweight_exit:
mtcr r5
mtsrr0 r6
mtsrr1 r7
- lwz r5, VCPU_GPR(r5)(r4)
- lwz r6, VCPU_GPR(r6)(r4)
- lwz r7, VCPU_GPR(r7)(r4)
- lwz r8, VCPU_GPR(r8)(r4)
+ lwz r5, VCPU_GPR(R5)(r4)
+ lwz r6, VCPU_GPR(R6)(r4)
+ lwz r7, VCPU_GPR(R7)(r4)
+ lwz r8, VCPU_GPR(R8)(r4)
/* Clear any debug events which occurred since we disabled MSR[DE].
* XXX This gives us a 3-instruction window in which a breakpoint
@@ -461,8 +461,8 @@ lightweight_exit:
ori r3, r3, 0xffff
mtspr SPRN_DBSR, r3
- lwz r3, VCPU_GPR(r3)(r4)
- lwz r4, VCPU_GPR(r4)(r4)
+ lwz r3, VCPU_GPR(R3)(r4)
+ lwz r4, VCPU_GPR(R4)(r4)
rfi
#ifdef CONFIG_SPE
Index: powerpc-test/arch/powerpc/kvm/bookehv_interrupts.S
===================================================================
--- powerpc-test.orig/arch/powerpc/kvm/bookehv_interrupts.S
+++ powerpc-test/arch/powerpc/kvm/bookehv_interrupts.S
@@ -67,15 +67,15 @@
*/
.macro kvm_handler_common intno, srr0, flags
/* Restore host stack pointer */
- PPC_STL r1, VCPU_GPR(r1)(r4)
- PPC_STL r2, VCPU_GPR(r2)(r4)
+ PPC_STL r1, VCPU_GPR(R1)(r4)
+ PPC_STL r2, VCPU_GPR(R2)(r4)
PPC_LL r1, VCPU_HOST_STACK(r4)
PPC_LL r2, HOST_R2(r1)
mfspr r10, SPRN_PID
lwz r8, VCPU_HOST_PID(r4)
PPC_LL r11, VCPU_SHARED(r4)
- PPC_STL r14, VCPU_GPR(r14)(r4) /* We need a non-volatile GPR. */
+ PPC_STL r14, VCPU_GPR(R14)(r4) /* We need a non-volatile GPR. */
li r14, \intno
stw r10, VCPU_GUEST_PID(r4)
@@ -137,27 +137,27 @@
*/
mfspr r3, SPRN_EPLC /* will already have correct ELPID and EGS */
- PPC_STL r15, VCPU_GPR(r15)(r4)
- PPC_STL r16, VCPU_GPR(r16)(r4)
- PPC_STL r17, VCPU_GPR(r17)(r4)
- PPC_STL r18, VCPU_GPR(r18)(r4)
- PPC_STL r19, VCPU_GPR(r19)(r4)
+ PPC_STL r15, VCPU_GPR(R15)(r4)
+ PPC_STL r16, VCPU_GPR(R16)(r4)
+ PPC_STL r17, VCPU_GPR(R17)(r4)
+ PPC_STL r18, VCPU_GPR(R18)(r4)
+ PPC_STL r19, VCPU_GPR(R19)(r4)
mr r8, r3
- PPC_STL r20, VCPU_GPR(r20)(r4)
+ PPC_STL r20, VCPU_GPR(R20)(r4)
rlwimi r8, r6, EPC_EAS_SHIFT - MSR_IR_LG, EPC_EAS
- PPC_STL r21, VCPU_GPR(r21)(r4)
+ PPC_STL r21, VCPU_GPR(R21)(r4)
rlwimi r8, r6, EPC_EPR_SHIFT - MSR_PR_LG, EPC_EPR
- PPC_STL r22, VCPU_GPR(r22)(r4)
+ PPC_STL r22, VCPU_GPR(R22)(r4)
rlwimi r8, r10, EPC_EPID_SHIFT, EPC_EPID
- PPC_STL r23, VCPU_GPR(r23)(r4)
- PPC_STL r24, VCPU_GPR(r24)(r4)
- PPC_STL r25, VCPU_GPR(r25)(r4)
- PPC_STL r26, VCPU_GPR(r26)(r4)
- PPC_STL r27, VCPU_GPR(r27)(r4)
- PPC_STL r28, VCPU_GPR(r28)(r4)
- PPC_STL r29, VCPU_GPR(r29)(r4)
- PPC_STL r30, VCPU_GPR(r30)(r4)
- PPC_STL r31, VCPU_GPR(r31)(r4)
+ PPC_STL r23, VCPU_GPR(R23)(r4)
+ PPC_STL r24, VCPU_GPR(R24)(r4)
+ PPC_STL r25, VCPU_GPR(R25)(r4)
+ PPC_STL r26, VCPU_GPR(R26)(r4)
+ PPC_STL r27, VCPU_GPR(R27)(r4)
+ PPC_STL r28, VCPU_GPR(R28)(r4)
+ PPC_STL r29, VCPU_GPR(R29)(r4)
+ PPC_STL r30, VCPU_GPR(R30)(r4)
+ PPC_STL r31, VCPU_GPR(R31)(r4)
mtspr SPRN_EPLC, r8
/* disable preemption, so we are sure we hit the fixup handler */
@@ -211,24 +211,24 @@
.macro kvm_handler intno srr0, srr1, flags
_GLOBAL(kvmppc_handler_\intno\()_\srr1)
GET_VCPU(r11, r10)
- PPC_STL r3, VCPU_GPR(r3)(r11)
+ PPC_STL r3, VCPU_GPR(R3)(r11)
mfspr r3, SPRN_SPRG_RSCRATCH0
- PPC_STL r4, VCPU_GPR(r4)(r11)
+ PPC_STL r4, VCPU_GPR(R4)(r11)
PPC_LL r4, THREAD_NORMSAVE(0)(r10)
- PPC_STL r5, VCPU_GPR(r5)(r11)
+ PPC_STL r5, VCPU_GPR(R5)(r11)
stw r13, VCPU_CR(r11)
mfspr r5, \srr0
- PPC_STL r3, VCPU_GPR(r10)(r11)
+ PPC_STL r3, VCPU_GPR(R10)(r11)
PPC_LL r3, THREAD_NORMSAVE(2)(r10)
- PPC_STL r6, VCPU_GPR(r6)(r11)
- PPC_STL r4, VCPU_GPR(r11)(r11)
+ PPC_STL r6, VCPU_GPR(R6)(r11)
+ PPC_STL r4, VCPU_GPR(R11)(r11)
mfspr r6, \srr1
- PPC_STL r7, VCPU_GPR(r7)(r11)
- PPC_STL r8, VCPU_GPR(r8)(r11)
- PPC_STL r9, VCPU_GPR(r9)(r11)
- PPC_STL r3, VCPU_GPR(r13)(r11)
+ PPC_STL r7, VCPU_GPR(R7)(r11)
+ PPC_STL r8, VCPU_GPR(R8)(r11)
+ PPC_STL r9, VCPU_GPR(R9)(r11)
+ PPC_STL r3, VCPU_GPR(R13)(r11)
mfctr r7
- PPC_STL r12, VCPU_GPR(r12)(r11)
+ PPC_STL r12, VCPU_GPR(R12)(r11)
PPC_STL r7, VCPU_CTR(r11)
mr r4, r11
kvm_handler_common \intno, \srr0, \flags
@@ -238,25 +238,25 @@ _GLOBAL(kvmppc_handler_\intno\()_\srr1)
_GLOBAL(kvmppc_handler_\intno\()_\srr1)
mfspr r10, SPRN_SPRG_THREAD
GET_VCPU(r11, r10)
- PPC_STL r3, VCPU_GPR(r3)(r11)
+ PPC_STL r3, VCPU_GPR(R3)(r11)
mfspr r3, \scratch
- PPC_STL r4, VCPU_GPR(r4)(r11)
+ PPC_STL r4, VCPU_GPR(R4)(r11)
PPC_LL r4, GPR9(r8)
- PPC_STL r5, VCPU_GPR(r5)(r11)
+ PPC_STL r5, VCPU_GPR(R5)(r11)
stw r9, VCPU_CR(r11)
mfspr r5, \srr0
- PPC_STL r3, VCPU_GPR(r8)(r11)
+ PPC_STL r3, VCPU_GPR(R8)(r11)
PPC_LL r3, GPR10(r8)
- PPC_STL r6, VCPU_GPR(r6)(r11)
- PPC_STL r4, VCPU_GPR(r9)(r11)
+ PPC_STL r6, VCPU_GPR(R6)(r11)
+ PPC_STL r4, VCPU_GPR(R9)(r11)
mfspr r6, \srr1
PPC_LL r4, GPR11(r8)
- PPC_STL r7, VCPU_GPR(r7)(r11)
- PPC_STL r3, VCPU_GPR(r10)(r11)
+ PPC_STL r7, VCPU_GPR(R7)(r11)
+ PPC_STL r3, VCPU_GPR(R10)(r11)
mfctr r7
- PPC_STL r12, VCPU_GPR(r12)(r11)
- PPC_STL r13, VCPU_GPR(r13)(r11)
- PPC_STL r4, VCPU_GPR(r11)(r11)
+ PPC_STL r12, VCPU_GPR(R12)(r11)
+ PPC_STL r13, VCPU_GPR(R13)(r11)
+ PPC_STL r4, VCPU_GPR(R11)(r11)
PPC_STL r7, VCPU_CTR(r11)
mr r4, r11
kvm_handler_common \intno, \srr0, \flags
@@ -310,7 +310,7 @@ kvm_lvl_handler BOOKE_INTERRUPT_DEBUG, \
_GLOBAL(kvmppc_resume_host)
/* Save remaining volatile guest register state to vcpu. */
mfspr r3, SPRN_VRSAVE
- PPC_STL r0, VCPU_GPR(r0)(r4)
+ PPC_STL r0, VCPU_GPR(R0)(r4)
mflr r5
mfspr r6, SPRN_SPRG4
PPC_STL r5, VCPU_LR(r4)
@@ -358,27 +358,27 @@ _GLOBAL(kvmppc_resume_host)
/* Restore vcpu pointer and the nonvolatiles we used. */
mr r4, r14
- PPC_LL r14, VCPU_GPR(r14)(r4)
+ PPC_LL r14, VCPU_GPR(R14)(r4)
andi. r5, r3, RESUME_FLAG_NV
beq skip_nv_load
- PPC_LL r15, VCPU_GPR(r15)(r4)
- PPC_LL r16, VCPU_GPR(r16)(r4)
- PPC_LL r17, VCPU_GPR(r17)(r4)
- PPC_LL r18, VCPU_GPR(r18)(r4)
- PPC_LL r19, VCPU_GPR(r19)(r4)
- PPC_LL r20, VCPU_GPR(r20)(r4)
- PPC_LL r21, VCPU_GPR(r21)(r4)
- PPC_LL r22, VCPU_GPR(r22)(r4)
- PPC_LL r23, VCPU_GPR(r23)(r4)
- PPC_LL r24, VCPU_GPR(r24)(r4)
- PPC_LL r25, VCPU_GPR(r25)(r4)
- PPC_LL r26, VCPU_GPR(r26)(r4)
- PPC_LL r27, VCPU_GPR(r27)(r4)
- PPC_LL r28, VCPU_GPR(r28)(r4)
- PPC_LL r29, VCPU_GPR(r29)(r4)
- PPC_LL r30, VCPU_GPR(r30)(r4)
- PPC_LL r31, VCPU_GPR(r31)(r4)
+ PPC_LL r15, VCPU_GPR(R15)(r4)
+ PPC_LL r16, VCPU_GPR(R16)(r4)
+ PPC_LL r17, VCPU_GPR(R17)(r4)
+ PPC_LL r18, VCPU_GPR(R18)(r4)
+ PPC_LL r19, VCPU_GPR(R19)(r4)
+ PPC_LL r20, VCPU_GPR(R20)(r4)
+ PPC_LL r21, VCPU_GPR(R21)(r4)
+ PPC_LL r22, VCPU_GPR(R22)(r4)
+ PPC_LL r23, VCPU_GPR(R23)(r4)
+ PPC_LL r24, VCPU_GPR(R24)(r4)
+ PPC_LL r25, VCPU_GPR(R25)(r4)
+ PPC_LL r26, VCPU_GPR(R26)(r4)
+ PPC_LL r27, VCPU_GPR(R27)(r4)
+ PPC_LL r28, VCPU_GPR(R28)(r4)
+ PPC_LL r29, VCPU_GPR(R29)(r4)
+ PPC_LL r30, VCPU_GPR(R30)(r4)
+ PPC_LL r31, VCPU_GPR(R31)(r4)
skip_nv_load:
/* Should we return to the guest? */
andi. r5, r3, RESUME_FLAG_HOST
@@ -396,23 +396,23 @@ heavyweight_exit:
* non-volatiles.
*/
- PPC_STL r15, VCPU_GPR(r15)(r4)
- PPC_STL r16, VCPU_GPR(r16)(r4)
- PPC_STL r17, VCPU_GPR(r17)(r4)
- PPC_STL r18, VCPU_GPR(r18)(r4)
- PPC_STL r19, VCPU_GPR(r19)(r4)
- PPC_STL r20, VCPU_GPR(r20)(r4)
- PPC_STL r21, VCPU_GPR(r21)(r4)
- PPC_STL r22, VCPU_GPR(r22)(r4)
- PPC_STL r23, VCPU_GPR(r23)(r4)
- PPC_STL r24, VCPU_GPR(r24)(r4)
- PPC_STL r25, VCPU_GPR(r25)(r4)
- PPC_STL r26, VCPU_GPR(r26)(r4)
- PPC_STL r27, VCPU_GPR(r27)(r4)
- PPC_STL r28, VCPU_GPR(r28)(r4)
- PPC_STL r29, VCPU_GPR(r29)(r4)
- PPC_STL r30, VCPU_GPR(r30)(r4)
- PPC_STL r31, VCPU_GPR(r31)(r4)
+ PPC_STL r15, VCPU_GPR(R15)(r4)
+ PPC_STL r16, VCPU_GPR(R16)(r4)
+ PPC_STL r17, VCPU_GPR(R17)(r4)
+ PPC_STL r18, VCPU_GPR(R18)(r4)
+ PPC_STL r19, VCPU_GPR(R19)(r4)
+ PPC_STL r20, VCPU_GPR(R20)(r4)
+ PPC_STL r21, VCPU_GPR(R21)(r4)
+ PPC_STL r22, VCPU_GPR(R22)(r4)
+ PPC_STL r23, VCPU_GPR(R23)(r4)
+ PPC_STL r24, VCPU_GPR(R24)(r4)
+ PPC_STL r25, VCPU_GPR(R25)(r4)
+ PPC_STL r26, VCPU_GPR(R26)(r4)
+ PPC_STL r27, VCPU_GPR(R27)(r4)
+ PPC_STL r28, VCPU_GPR(R28)(r4)
+ PPC_STL r29, VCPU_GPR(R29)(r4)
+ PPC_STL r30, VCPU_GPR(R30)(r4)
+ PPC_STL r31, VCPU_GPR(R31)(r4)
/* Load host non-volatile register state from host stack. */
PPC_LL r14, HOST_NV_GPR(r14)(r1)
@@ -478,24 +478,24 @@ _GLOBAL(__kvmppc_vcpu_run)
PPC_STL r31, HOST_NV_GPR(r31)(r1)
/* Load guest non-volatiles. */
- PPC_LL r14, VCPU_GPR(r14)(r4)
- PPC_LL r15, VCPU_GPR(r15)(r4)
- PPC_LL r16, VCPU_GPR(r16)(r4)
- PPC_LL r17, VCPU_GPR(r17)(r4)
- PPC_LL r18, VCPU_GPR(r18)(r4)
- PPC_LL r19, VCPU_GPR(r19)(r4)
- PPC_LL r20, VCPU_GPR(r20)(r4)
- PPC_LL r21, VCPU_GPR(r21)(r4)
- PPC_LL r22, VCPU_GPR(r22)(r4)
- PPC_LL r23, VCPU_GPR(r23)(r4)
- PPC_LL r24, VCPU_GPR(r24)(r4)
- PPC_LL r25, VCPU_GPR(r25)(r4)
- PPC_LL r26, VCPU_GPR(r26)(r4)
- PPC_LL r27, VCPU_GPR(r27)(r4)
- PPC_LL r28, VCPU_GPR(r28)(r4)
- PPC_LL r29, VCPU_GPR(r29)(r4)
- PPC_LL r30, VCPU_GPR(r30)(r4)
- PPC_LL r31, VCPU_GPR(r31)(r4)
+ PPC_LL r14, VCPU_GPR(R14)(r4)
+ PPC_LL r15, VCPU_GPR(R15)(r4)
+ PPC_LL r16, VCPU_GPR(R16)(r4)
+ PPC_LL r17, VCPU_GPR(R17)(r4)
+ PPC_LL r18, VCPU_GPR(R18)(r4)
+ PPC_LL r19, VCPU_GPR(R19)(r4)
+ PPC_LL r20, VCPU_GPR(R20)(r4)
+ PPC_LL r21, VCPU_GPR(R21)(r4)
+ PPC_LL r22, VCPU_GPR(R22)(r4)
+ PPC_LL r23, VCPU_GPR(R23)(r4)
+ PPC_LL r24, VCPU_GPR(R24)(r4)
+ PPC_LL r25, VCPU_GPR(R25)(r4)
+ PPC_LL r26, VCPU_GPR(R26)(r4)
+ PPC_LL r27, VCPU_GPR(R27)(r4)
+ PPC_LL r28, VCPU_GPR(R28)(r4)
+ PPC_LL r29, VCPU_GPR(R29)(r4)
+ PPC_LL r30, VCPU_GPR(R30)(r4)
+ PPC_LL r31, VCPU_GPR(R31)(r4)
lightweight_exit:
@@ -554,13 +554,13 @@ lightweight_exit:
lwz r7, VCPU_CR(r4)
PPC_LL r8, VCPU_PC(r4)
PPC_LD(r9, VCPU_SHARED_MSR, r11)
- PPC_LL r0, VCPU_GPR(r0)(r4)
- PPC_LL r1, VCPU_GPR(r1)(r4)
- PPC_LL r2, VCPU_GPR(r2)(r4)
- PPC_LL r10, VCPU_GPR(r10)(r4)
- PPC_LL r11, VCPU_GPR(r11)(r4)
- PPC_LL r12, VCPU_GPR(r12)(r4)
- PPC_LL r13, VCPU_GPR(r13)(r4)
+ PPC_LL r0, VCPU_GPR(R0)(r4)
+ PPC_LL r1, VCPU_GPR(R1)(r4)
+ PPC_LL r2, VCPU_GPR(R2)(r4)
+ PPC_LL r10, VCPU_GPR(R10)(r4)
+ PPC_LL r11, VCPU_GPR(R11)(r4)
+ PPC_LL r12, VCPU_GPR(R12)(r4)
+ PPC_LL r13, VCPU_GPR(R13)(r4)
mtlr r3
mtxer r5
mtctr r6
@@ -586,12 +586,12 @@ lightweight_exit:
mtcr r7
/* Finish loading guest volatiles and jump to guest. */
- PPC_LL r5, VCPU_GPR(r5)(r4)
- PPC_LL r6, VCPU_GPR(r6)(r4)
- PPC_LL r7, VCPU_GPR(r7)(r4)
- PPC_LL r8, VCPU_GPR(r8)(r4)
- PPC_LL r9, VCPU_GPR(r9)(r4)
+ PPC_LL r5, VCPU_GPR(R5)(r4)
+ PPC_LL r6, VCPU_GPR(R6)(r4)
+ PPC_LL r7, VCPU_GPR(R7)(r4)
+ PPC_LL r8, VCPU_GPR(R8)(r4)
+ PPC_LL r9, VCPU_GPR(R9)(r4)
- PPC_LL r3, VCPU_GPR(r3)(r4)
- PPC_LL r4, VCPU_GPR(r4)(r4)
+ PPC_LL r3, VCPU_GPR(R3)(r4)
+ PPC_LL r4, VCPU_GPR(R4)(r4)
rfi
Index: powerpc-test/arch/powerpc/lib/checksum_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/checksum_64.S
+++ powerpc-test/arch/powerpc/lib/checksum_64.S
@@ -114,9 +114,9 @@ _GLOBAL(csum_partial)
mtctr r6
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
ld r6,0(r3)
ld r9,8(r3)
@@ -175,9 +175,9 @@ _GLOBAL(csum_partial)
adde r0,r0,r15
adde r0,r0,r16
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
addi r1,r1,STACKFRAMESIZE
andi. r4,r4,63
@@ -299,9 +299,9 @@ dest; sth r6,0(r4)
mtctr r6
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
source; ld r6,0(r3)
source; ld r9,8(r3)
@@ -382,9 +382,9 @@ dest; std r16,56(r4)
adde r0,r0,r15
adde r0,r0,r16
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
addi r1,r1,STACKFRAMESIZE
andi. r5,r5,63
Index: powerpc-test/arch/powerpc/lib/copypage_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copypage_power7.S
+++ powerpc-test/arch/powerpc/lib/copypage_power7.S
@@ -113,13 +113,13 @@ _GLOBAL(copypage_power7)
#endif
.Lnonvmx_copy:
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
- std r17,STK_REG(r17)(r1)
- std r18,STK_REG(r18)(r1)
- std r19,STK_REG(r19)(r1)
- std r20,STK_REG(r20)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
1: ld r0,0(r4)
ld r5,8(r4)
@@ -157,12 +157,12 @@ _GLOBAL(copypage_power7)
addi r3,r3,128
bdnz 1b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r20,STK_REG(r20)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
addi r1,r1,STACKFRAMESIZE
blr
Index: powerpc-test/arch/powerpc/lib/copyuser_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copyuser_64.S
+++ powerpc-test/arch/powerpc/lib/copyuser_64.S
@@ -30,7 +30,7 @@ _GLOBAL(__copy_tofrom_user_base)
dcbt 0,r4
beq .Lcopy_page_4K
andi. r6,r6,7
- PPC_MTOCRF(0x01,r5)
+ PPC_MTOCRF(0x01,R5)
blt cr1,.Lshort_copy
/* Below we want to nop out the bne if we're on a CPU that has the
* CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
@@ -186,7 +186,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
blr
.Ldst_unaligned:
- PPC_MTOCRF(0x01,r6) /* put #bytes to 8B bdry into cr7 */
+ PPC_MTOCRF(0x01,R6) /* put #bytes to 8B bdry into cr7 */
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -201,7 +201,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
2: bf cr7*4+1,3f
37: lwzx r0,r7,r4
83: stwx r0,r7,r3
-3: PPC_MTOCRF(0x01,r5)
+3: PPC_MTOCRF(0x01,R5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
Index: powerpc-test/arch/powerpc/lib/copyuser_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copyuser_power7.S
+++ powerpc-test/arch/powerpc/lib/copyuser_power7.S
@@ -57,9 +57,9 @@
.Ldo_err4:
- ld r16,STK_REG(r16)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r14,STK_REG(r14)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r14,STK_REG(R14)(r1)
.Ldo_err3:
bl .exit_vmx_usercopy
ld r0,STACKFRAMESIZE+16(r1)
@@ -68,15 +68,15 @@
#endif /* CONFIG_ALTIVEC */
.Ldo_err2:
- ld r22,STK_REG(r22)(r1)
- ld r21,STK_REG(r21)(r1)
- ld r20,STK_REG(r20)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r14,STK_REG(r14)(r1)
+ ld r22,STK_REG(R22)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r14,STK_REG(R14)(r1)
.Lexit:
addi r1,r1,STACKFRAMESIZE
.Ldo_err1:
@@ -137,15 +137,15 @@ err1; stw r0,0(r3)
mflr r0
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
- std r17,STK_REG(r17)(r1)
- std r18,STK_REG(r18)(r1)
- std r19,STK_REG(r19)(r1)
- std r20,STK_REG(r20)(r1)
- std r21,STK_REG(r21)(r1)
- std r22,STK_REG(r22)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+ std r21,STK_REG(R21)(r1)
+ std r22,STK_REG(R22)(r1)
std r0,STACKFRAMESIZE+16(r1)
srdi r6,r5,7
@@ -192,15 +192,15 @@ err2; std r21,120(r3)
clrldi r5,r5,(64-7)
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r20,STK_REG(r20)(r1)
- ld r21,STK_REG(r21)(r1)
- ld r22,STK_REG(r22)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r22,STK_REG(R22)(r1)
addi r1,r1,STACKFRAMESIZE
/* Up to 127B to go */
@@ -440,9 +440,9 @@ err3; stvx vr0,r3,r11
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -477,9 +477,9 @@ err4; stvx vr0,r3,r16
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
@@ -625,9 +625,9 @@ err3; stvx vr11,r3,r11
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -670,9 +670,9 @@ err4; stvx vr15,r3,r16
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
Index: powerpc-test/arch/powerpc/lib/hweight_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/hweight_64.S
+++ powerpc-test/arch/powerpc/lib/hweight_64.S
@@ -28,7 +28,7 @@ BEGIN_FTR_SECTION
nop
nop
FTR_SECTION_ELSE
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
@@ -42,14 +42,14 @@ BEGIN_FTR_SECTION
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(50)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,8
add r3,r4,r3
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(50)
clrlwi r3,r3,16
- PPC_POPCNTW(r3,r3)
+ PPC_POPCNTW(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 50)
@@ -66,7 +66,7 @@ BEGIN_FTR_SECTION
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(51)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,16
add r3,r4,r3
srdi r4,r3,8
@@ -74,7 +74,7 @@ FTR_SECTION_ELSE
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(51)
- PPC_POPCNTW(r3,r3)
+ PPC_POPCNTW(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 51)
@@ -93,7 +93,7 @@ BEGIN_FTR_SECTION
nop
FTR_SECTION_ELSE
BEGIN_FTR_SECTION_NESTED(52)
- PPC_POPCNTB(r3,r3)
+ PPC_POPCNTB(R3,R3)
srdi r4,r3,32
add r3,r4,r3
srdi r4,r3,16
@@ -103,7 +103,7 @@ FTR_SECTION_ELSE
clrldi r3,r3,64-8
blr
FTR_SECTION_ELSE_NESTED(52)
- PPC_POPCNTD(r3,r3)
+ PPC_POPCNTD(R3,R3)
clrldi r3,r3,64-8
blr
ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_POPCNTD, 52)
Index: powerpc-test/arch/powerpc/lib/ldstfp.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/ldstfp.S
+++ powerpc-test/arch/powerpc/lib/ldstfp.S
@@ -330,13 +330,13 @@ _GLOBAL(do_lxvd2x)
MTMSRD(r7)
isync
beq cr7,1f
- STXVD2X(0,r1,r8)
+ STXVD2X(0,R1,R8)
1: li r9,-EFAULT
-2: LXVD2X(0,0,r4)
+2: LXVD2X(0,0,R4)
li r9,0
3: beq cr7,4f
bl put_vsr
- LXVD2X(0,r1,r8)
+ LXVD2X(0,R1,R8)
4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1)
mtlr r0
MTMSRD(r6)
@@ -358,13 +358,13 @@ _GLOBAL(do_stxvd2x)
MTMSRD(r7)
isync
beq cr7,1f
- STXVD2X(0,r1,r8)
+ STXVD2X(0,R1,R8)
bl get_vsr
1: li r9,-EFAULT
-2: STXVD2X(0,0,r4)
+2: STXVD2X(0,0,R4)
li r9,0
3: beq cr7,4f
- LXVD2X(0,r1,r8)
+ LXVD2X(0,R1,R8)
4: PPC_LL r0,STKFRM+PPC_LR_STKOFF(r1)
mtlr r0
MTMSRD(r6)
Index: powerpc-test/arch/powerpc/lib/mem_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/mem_64.S
+++ powerpc-test/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@ _GLOBAL(memset)
rlwimi r4,r4,16,0,15
cmplw cr1,r5,r0 /* do we get that far? */
rldimi r4,r4,32,0
- PPC_MTOCRF(1,r0)
+ PPC_MTOCRF(1,R0)
mr r6,r3
blt cr1,8f
beq+ 3f /* if already 8-byte aligned */
@@ -49,7 +49,7 @@ _GLOBAL(memset)
bdnz 4b
5: srwi. r0,r5,3
clrlwi r5,r5,29
- PPC_MTOCRF(1,r0)
+ PPC_MTOCRF(1,R0)
beq 8f
bf 29,6f
std r4,0(r6)
@@ -65,7 +65,7 @@ _GLOBAL(memset)
std r4,0(r6)
addi r6,r6,8
8: cmpwi r5,0
- PPC_MTOCRF(1,r5)
+ PPC_MTOCRF(1,R5)
beqlr+
bf 29,9f
stw r4,0(r6)
Index: powerpc-test/arch/powerpc/lib/memcpy_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/memcpy_64.S
+++ powerpc-test/arch/powerpc/lib/memcpy_64.S
@@ -16,7 +16,7 @@ BEGIN_FTR_SECTION
FTR_SECTION_ELSE
b memcpy_power7
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
- PPC_MTOCRF(0x01,r5)
+ PPC_MTOCRF(0x01,R5)
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
andi. r6,r6,7
@@ -158,7 +158,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
blr
.Ldst_unaligned:
- PPC_MTOCRF(0x01,r6) # put #bytes to 8B bdry into cr7
+ PPC_MTOCRF(0x01,R6) # put #bytes to 8B bdry into cr7
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -173,7 +173,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_
2: bf cr7*4+1,3f
lwzx r0,r7,r4
stwx r0,r7,r3
-3: PPC_MTOCRF(0x01,r5)
+3: PPC_MTOCRF(0x01,R5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
Index: powerpc-test/arch/powerpc/lib/memcpy_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/memcpy_power7.S
+++ powerpc-test/arch/powerpc/lib/memcpy_power7.S
@@ -69,15 +69,15 @@ _GLOBAL(memcpy_power7)
mflr r0
stdu r1,-STACKFRAMESIZE(r1)
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
- std r17,STK_REG(r17)(r1)
- std r18,STK_REG(r18)(r1)
- std r19,STK_REG(r19)(r1)
- std r20,STK_REG(r20)(r1)
- std r21,STK_REG(r21)(r1)
- std r22,STK_REG(r22)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+ std r21,STK_REG(R21)(r1)
+ std r22,STK_REG(R22)(r1)
std r0,STACKFRAMESIZE+16(r1)
srdi r6,r5,7
@@ -124,15 +124,15 @@ _GLOBAL(memcpy_power7)
clrldi r5,r5,(64-7)
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
- ld r17,STK_REG(r17)(r1)
- ld r18,STK_REG(r18)(r1)
- ld r19,STK_REG(r19)(r1)
- ld r20,STK_REG(r20)(r1)
- ld r21,STK_REG(r21)(r1)
- ld r22,STK_REG(r22)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r22,STK_REG(R22)(r1)
addi r1,r1,STACKFRAMESIZE
/* Up to 127B to go */
@@ -343,9 +343,9 @@ _GLOBAL(memcpy_power7)
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -380,9 +380,9 @@ _GLOBAL(memcpy_power7)
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
@@ -529,9 +529,9 @@ _GLOBAL(memcpy_power7)
7: sub r5,r5,r6
srdi r6,r5,7
- std r14,STK_REG(r14)(r1)
- std r15,STK_REG(r15)(r1)
- std r16,STK_REG(r16)(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
li r12,64
li r14,80
@@ -574,9 +574,9 @@ _GLOBAL(memcpy_power7)
addi r3,r3,128
bdnz 8b
- ld r14,STK_REG(r14)(r1)
- ld r15,STK_REG(r15)(r1)
- ld r16,STK_REG(r16)(r1)
+ ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
/* Up to 127B to go */
clrldi r5,r5,(64-7)
Index: powerpc-test/arch/powerpc/mm/hash_low_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/hash_low_64.S
+++ powerpc-test/arch/powerpc/mm/hash_low_64.S
@@ -64,9 +64,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARM(R6)(r1)
+ std r8,STK_PARM(R8)(r1)
+ std r9,STK_PARM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -75,11 +75,11 @@ _GLOBAL(__hash_page_4K)
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -162,7 +162,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -192,11 +192,11 @@ htab_insert_pte:
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -215,11 +215,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -255,15 +255,15 @@ htab_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
htab_write_out_pte:
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r30,0(r6)
li r3, 0
htab_bail:
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -288,8 +288,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARM(R9)(r1) /* segment size */
+ ld r8,STK_PARM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* Patched by htab_finish_init() */
@@ -312,7 +312,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -340,9 +340,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARM(R6)(r1)
+ std r8,STK_PARM(R8)(r1)
+ std r9,STK_PARM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -353,13 +353,13 @@ _GLOBAL(__hash_page_4K)
* r26 is the hidx mask
* r25 is the index in combo page
*/
- std r25,STK_REG(r25)(r1)
- std r26,STK_REG(r26)(r1)
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r25,STK_REG(R25)(r1)
+ std r26,STK_REG(R26)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -452,7 +452,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -473,7 +473,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
andis. r0,r31,_PAGE_COMBO@h
beq htab_inval_old_hpte
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
ori r26,r6,0x8000 /* Load the hidx mask */
ld r26,0(r26)
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
@@ -495,11 +495,11 @@ htab_special_pfn:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -522,11 +522,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -559,8 +559,8 @@ htab_inval_old_hpte:
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
- ld r7,STK_PARM(r9)(r1) /* ssize */
- ld r8,STK_PARM(r8)(r1) /* local */
+ ld r7,STK_PARM(R9)(r1) /* ssize */
+ ld r8,STK_PARM(R8)(r1) /* local */
bl .flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
@@ -576,7 +576,7 @@ htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE second half,
* clear _PAGE_BUSY and set approriate HPTE slot bit
*/
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
li r0,_PAGE_BUSY
andc r30,r30,r0
/* HPTE SUB bit */
@@ -597,13 +597,13 @@ htab_pte_insert_ok:
std r30,0(r6)
li r3, 0
htab_bail:
- ld r25,STK_REG(r25)(r1)
- ld r26,STK_REG(r26)(r1)
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r25,STK_REG(R25)(r1)
+ ld r26,STK_REG(R26)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -630,8 +630,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARM(R9)(r1) /* segment size */
+ ld r8,STK_PARM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -644,7 +644,7 @@ _GLOBAL(htab_call_hpte_updatepp)
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r30,0(r6)
li r3,0
b htab_bail
@@ -657,7 +657,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -677,9 +677,9 @@ _GLOBAL(__hash_page_64K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(r6)(r1)
- std r8,STK_PARM(r8)(r1)
- std r9,STK_PARM(r9)(r1)
+ std r6,STK_PARM(R6)(r1)
+ std r8,STK_PARM(R8)(r1)
+ std r9,STK_PARM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -688,11 +688,11 @@ _GLOBAL(__hash_page_64K)
* r28 is a hash value
* r27 is hashtab mask (maybe dynamic patched instead ?)
*/
- std r27,STK_REG(r27)(r1)
- std r28,STK_REG(r28)(r1)
- std r29,STK_REG(r29)(r1)
- std r30,STK_REG(r30)(r1)
- std r31,STK_REG(r31)(r1)
+ std r27,STK_REG(R27)(r1)
+ std r28,STK_REG(R28)(r1)
+ std r29,STK_REG(R29)(r1)
+ std r30,STK_REG(R30)(r1)
+ std r31,STK_REG(R31)(r1)
/* Step 1:
*
@@ -780,7 +780,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(r4)(r1)
+ std r3,STK_PARM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -813,11 +813,11 @@ ht64_insert_pte:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -836,11 +836,11 @@ _GLOBAL(ht64_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(r4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(r9)(r1) /* segment size */
+ ld r9,STK_PARM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -876,15 +876,15 @@ ht64_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
ht64_write_out_pte:
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r30,0(r6)
li r3, 0
ht64_bail:
- ld r27,STK_REG(r27)(r1)
- ld r28,STK_REG(r28)(r1)
- ld r29,STK_REG(r29)(r1)
- ld r30,STK_REG(r30)(r1)
- ld r31,STK_REG(r31)(r1)
+ ld r27,STK_REG(R27)(r1)
+ ld r28,STK_REG(R28)(r1)
+ ld r29,STK_REG(R29)(r1)
+ ld r30,STK_REG(R30)(r1)
+ ld r31,STK_REG(R31)(r1)
addi r1,r1,STACKFRAMESIZE
ld r0,16(r1)
mtlr r0
@@ -909,8 +909,8 @@ ht64_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_64K
- ld r7,STK_PARM(r9)(r1) /* segment size */
- ld r8,STK_PARM(r8)(r1) /* get "local" param */
+ ld r7,STK_PARM(R9)(r1) /* segment size */
+ ld r8,STK_PARM(R8)(r1) /* get "local" param */
_GLOBAL(ht64_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -933,7 +933,7 @@ ht64_wrong_access:
ht64_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(r6)(r1)
+ ld r6,STK_PARM(R6)(r1)
std r31,0(r6)
li r3,-1
b ht64_bail
Index: powerpc-test/arch/powerpc/mm/tlb_low_64e.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/tlb_low_64e.S
+++ powerpc-test/arch/powerpc/mm/tlb_low_64e.S
@@ -126,7 +126,7 @@ BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(R0,R16)
ldx r14,r14,r15 /* grab pgd entry */
beq normal_tlb_miss_done /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
@@ -395,7 +395,7 @@ BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(R0,R16)
ld r14,0(r10)
beq normal_tlb_miss_done
MMU_FTR_SECTION_ELSE
@@ -528,7 +528,7 @@ BEGIN_MMU_FTR_SECTION
/* Search if we already have a TLB entry for that virtual address, and
* if we do, bail out.
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(R0,R16)
beq virt_page_table_tlb_miss_done
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
@@ -779,7 +779,7 @@ htw_tlb_miss:
*
* MAS1:IND should be already set based on MAS4
*/
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(R0,R16)
beq htw_tlb_miss_done
/* Now, we need to walk the page tables. First check if we are in
@@ -919,7 +919,7 @@ tlb_load_linear:
mtspr SPRN_MAS1,r15
/* Already somebody there ? */
- PPC_TLBSRX_DOT(0,r16)
+ PPC_TLBSRX_DOT(R0,R16)
beq tlb_load_linear_done
/* Now we build the remaining MAS. MAS0 and 2 should be fine
Index: powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/tlb_nohash_low.S
+++ powerpc-test/arch/powerpc/mm/tlb_nohash_low.S
@@ -313,7 +313,7 @@ BEGIN_MMU_FTR_SECTION
mtspr SPRN_MAS1,r4
tlbwe
MMU_FTR_SECTION_ELSE
- PPC_TLBILX_VA(0,r3)
+ PPC_TLBILX_VA(R0,R3)
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
msync
isync
@@ -364,7 +364,7 @@ _GLOBAL(_tlbil_va)
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBILX_VA(0,r3)
+ PPC_TLBILX_VA(R0,R3)
msync
isync
wrtee r10
@@ -379,7 +379,7 @@ _GLOBAL(_tlbivax_bcast)
beq 1f
rlwimi r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
1: mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- PPC_TLBIVAX(0,r3)
+ PPC_TLBIVAX(R0,R3)
eieio
tlbsync
sync
Index: powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/cell/beat_hvCall.S
+++ powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -74,7 +74,7 @@ _GLOBAL(beat_hcall_norets8)
mr r6,r7
mr r7,r8
mr r8,r9
- ld r10,STK_PARM(r10)(r1)
+ ld r10,STK_PARM(R10)(r1)
HVSC /* invoke the hypervisor */
@@ -94,7 +94,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -108,7 +108,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
lwz r0,8(r1)
@@ -125,7 +125,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -139,7 +139,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
@@ -157,7 +157,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -171,7 +171,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -190,7 +190,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -204,7 +204,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -224,7 +224,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -238,7 +238,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -259,7 +259,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_PRECALL
- std r4,STK_PARM(r4)(r1) /* save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -273,7 +273,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
Index: powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/powernv/opal-takeover.S
+++ powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -23,14 +23,14 @@
_GLOBAL(opal_query_takeover)
mfcr r0
stw r0,8(r1)
- std r3,STK_PARAM(r3)(r1)
- std r4,STK_PARAM(r4)(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
li r3,H_HAL_TAKEOVER
li r4,H_HAL_TAKEOVER_QUERY_MAGIC
HVSC
- ld r10,STK_PARAM(r3)(r1)
+ ld r10,STK_PARAM(R3)(r1)
std r4,0(r10)
- ld r10,STK_PARAM(r4)(r1)
+ ld r10,STK_PARAM(R4)(r1)
std r5,0(r10)
lwz r0,8(r1)
mtcrf 0xff,r0
Index: powerpc-test/arch/powerpc/platforms/powernv/opal-wrappers.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ powerpc-test/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
std r12,PACASAVEDMSR(r13); \
andc r12,r12,r0; \
mtmsrd r12,1; \
- LOAD_REG_ADDR(r0,.opal_return); \
+ LOAD_REG_ADDR(R0,.opal_return); \
mtlr r0; \
li r0,MSR_DR|MSR_IR; \
andc r12,r12,r0; \
Index: powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/pseries/hvCall.S
+++ powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
@@ -40,28 +40,28 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- std r3,STK_PARM(r3)(r1); \
- std r4,STK_PARM(r4)(r1); \
- std r5,STK_PARM(r5)(r1); \
- std r6,STK_PARM(r6)(r1); \
- std r7,STK_PARM(r7)(r1); \
- std r8,STK_PARM(r8)(r1); \
- std r9,STK_PARM(r9)(r1); \
- std r10,STK_PARM(r10)(r1); \
+ std r3,STK_PARM(R3)(r1); \
+ std r4,STK_PARM(R4)(r1); \
+ std r5,STK_PARM(R5)(r1); \
+ std r6,STK_PARM(R6)(r1); \
+ std r7,STK_PARM(R7)(r1); \
+ std r8,STK_PARM(R8)(r1); \
+ std r9,STK_PARM(R9)(r1); \
+ std r10,STK_PARM(R10)(r1); \
std r0,16(r1); \
addi r4,r1,STK_PARM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
bl .__trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
- ld r4,STK_PARM(r4)(r1); \
- ld r5,STK_PARM(r5)(r1); \
- ld r6,STK_PARM(r6)(r1); \
- ld r7,STK_PARM(r7)(r1); \
- ld r8,STK_PARM(r8)(r1); \
- ld r9,STK_PARM(r9)(r1); \
- ld r10,STK_PARM(r10)(r1); \
+ ld r3,STK_PARM(R3)(r1); \
+ ld r4,STK_PARM(R4)(r1); \
+ ld r5,STK_PARM(R5)(r1); \
+ ld r6,STK_PARM(R6)(r1); \
+ ld r7,STK_PARM(R7)(r1); \
+ ld r8,STK_PARM(R8)(r1); \
+ ld r9,STK_PARM(R9)(r1); \
+ ld r10,STK_PARM(R10)(r1); \
mtlr r0; \
1:
@@ -79,8 +79,8 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- ld r6,STK_PARM(r3)(r1); \
- std r3,STK_PARM(r3)(r1); \
+ ld r6,STK_PARM(R3)(r1); \
+ std r3,STK_PARM(R3)(r1); \
mr r4,r3; \
mr r3,r6; \
std r0,16(r1); \
@@ -88,7 +88,7 @@ END_FTR_SECTION(0, 1); \
bl .__trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(r3)(r1); \
+ ld r3,STK_PARM(R3)(r1); \
mtlr r0; \
1:
@@ -114,7 +114,7 @@ _GLOBAL(plpar_hcall_norets)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r4)
+ HCALL_INST_PRECALL(R4)
HVSC /* invoke the hypervisor */
@@ -130,9 +130,9 @@ _GLOBAL(plpar_hcall)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -143,7 +143,7 @@ _GLOBAL(plpar_hcall)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -168,7 +168,7 @@ _GLOBAL(plpar_hcall_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -179,7 +179,7 @@ _GLOBAL(plpar_hcall_raw)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -196,9 +196,9 @@ _GLOBAL(plpar_hcall9)
mfcr r0
stw r0,8(r1)
- HCALL_INST_PRECALL(r5)
+ HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -206,14 +206,14 @@ _GLOBAL(plpar_hcall9)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -238,7 +238,7 @@ _GLOBAL(plpar_hcall9_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(r4)(r1) /* Save ret buffer */
+ std r4,STK_PARM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -246,14 +246,14 @@ _GLOBAL(plpar_hcall9_raw)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(r11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(r12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(r13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(r4)(r1)
+ ld r12,STK_PARM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
^ permalink raw reply
* [PATCH 2/18] powerpc: modify macro ready for %r0 register change
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
The assembler doesn't take %r0 register arguments in braces, so remove them.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc_asm.h | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -295,14 +295,14 @@ n:
*/
#ifdef __powerpc64__
#define LOAD_REG_IMMEDIATE(reg,expr) \
- lis (reg),(expr)@highest; \
- ori (reg),(reg),(expr)@higher; \
- rldicr (reg),(reg),32,31; \
- oris (reg),(reg),(expr)@h; \
- ori (reg),(reg),(expr)@l;
+ lis reg,(expr)@highest; \
+ ori reg,reg,(expr)@higher; \
+ rldicr reg,reg,32,31; \
+ oris reg,reg,(expr)@h; \
+ ori reg,reg,(expr)@l;
#define LOAD_REG_ADDR(reg,name) \
- ld (reg),name@got(r2)
+ ld reg,name@got(r2)
#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name)
#define ADDROFF(name) 0
@@ -313,12 +313,12 @@ n:
#else /* 32-bit */
#define LOAD_REG_IMMEDIATE(reg,expr) \
- lis (reg),(expr)@ha; \
- addi (reg),(reg),(expr)@l;
+ lis reg,(expr)@ha; \
+ addi reg,reg,(expr)@l;
#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name)
-#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha
+#define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha
#define ADDROFF(name) name@l
/* offsets for stack frame layout */
^ permalink raw reply
* [PATCH 1/18] powerpc: Add defines for R0-R31
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
We are going to use these later and convert r0 to %r0 etc.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc-opcode.h | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
Index: powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc-opcode.h
+++ powerpc-test/arch/powerpc/include/asm/ppc-opcode.h
@@ -15,6 +15,39 @@
#include <linux/stringify.h>
#include <asm/asm-compat.h>
+#define R0 0
+#define R1 1
+#define R2 2
+#define R3 3
+#define R4 4
+#define R5 5
+#define R6 6
+#define R7 7
+#define R8 8
+#define R9 9
+#define R10 10
+#define R11 11
+#define R12 12
+#define R13 13
+#define R14 14
+#define R15 15
+#define R16 16
+#define R17 17
+#define R18 18
+#define R19 19
+#define R20 20
+#define R21 21
+#define R22 22
+#define R23 23
+#define R24 24
+#define R25 25
+#define R26 26
+#define R27 27
+#define R28 28
+#define R29 29
+#define R30 30
+#define R31 31
+
/* sorted alphabetically */
#define PPC_INST_DCBA 0x7c0005ec
#define PPC_INST_DCBA_MASK 0xfc0007fe
^ permalink raw reply
* [PATCH 0/18] powerpc: convert GPR usage to %r0-31 and R0-31
From: Michael Neuling @ 2012-06-21 2:04 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: mikey, linuxppc-dev, schwab, Anton Blanchard, Olof Johannsson
First 5 patches convert us to %r0-31.
Next 12 convert make using R0-31 required in macros.
Last 2 convert instructions where ra = r0 we use 0 rather than the
register value (as suggested by Andreas).
Version 3 adds:
Fixes for chroma (moved some defines ppc_asm.h -> ppc-opcode.h)
Fixed comment in sldi patch to reflect new change (thanks Segher)
Version 2 adds:
ra = 0 idea (as Andreas suggested)
Fixes for 32bit KVM (added ppc44x_defconfig to my testing)
Based on mpe's next tree which has Antons power7 copy patches which
needed fixes for this
^ permalink raw reply
* Re: [PATCH] i2c: let the core register devices from devicetree
From: Barry Song @ 2012-06-21 1:16 UTC (permalink / raw)
To: Wolfram Sang
Cc: Viresh Kumar, Mauro Carvalho Chehab, Tony Lindgren, Linus Walleij,
Haojian Zhuang, Laxman Dewangan, linux-i2c, Kukjin Kim,
Stephen Warren, Olof Johansson, Deepak Sikri, Haavard Skinnemoen,
Pawel Moll, Wolfram Sang, Sascha Hauer, Rusty Russell,
Tang Yuantian, Jean Delvare (PC drivers, core), Magnus Damm,
Lars-Peter Clausen, Ben Dooks (embedded platforms),
linux-arm-kernel, Jiri Kosina, Kyungmin Park, Karol Lewandowski,
Dirk Brandewie, Shawn Guo, linuxppc-dev
In-Reply-To: <1339622215-4733-1-git-send-email-w.sang@pengutronix.de>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==
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox