* Re: [PATCH] powerpc: Remove platforms/wsp and associated pieces
From: Paul Bolle @ 2014-06-02 8:04 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev, Jimi Xenidis, Stephen Rothwell
In-Reply-To: <1401672046-17607-1-git-send-email-mpe@ellerman.id.au>
On Mon, 2014-06-02 at 11:20 +1000, Michael Ellerman wrote:
> __attribute__ ((unused))
>
> WSP is the last user of CONFIG_PPC_A2, so we remove that as well.
>
> Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
> any Book3E platform, so we can remove the code in mmu-book3e.h that
> depended on it.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---
> arch/powerpc/Kconfig.debug | 5 -
> arch/powerpc/configs/chroma_defconfig | 307 ---------
> arch/powerpc/include/asm/mmu-book3e.h | 4 -
> arch/powerpc/include/asm/reg_a2.h | 9 -
> arch/powerpc/include/asm/wsp.h | 14 -
> arch/powerpc/kernel/Makefile | 1 -
> arch/powerpc/kernel/cpu_setup_a2.S | 120 ----
> arch/powerpc/kernel/cputable.c | 38 --
> arch/powerpc/kernel/exceptions-64e.S | 16 -
> arch/powerpc/kernel/udbg.c | 2 -
> arch/powerpc/kernel/udbg_16550.c | 11 -
> arch/powerpc/platforms/Kconfig | 1 -
> arch/powerpc/platforms/Kconfig.cputype | 6 +-
> arch/powerpc/platforms/Makefile | 1 -
> arch/powerpc/platforms/wsp/Kconfig | 30 -
> arch/powerpc/platforms/wsp/Makefile | 10 -
> arch/powerpc/platforms/wsp/chroma.c | 56 --
> arch/powerpc/platforms/wsp/h8.c | 135 ----
> arch/powerpc/platforms/wsp/ics.c | 762 ---------------------
> arch/powerpc/platforms/wsp/ics.h | 25 -
> arch/powerpc/platforms/wsp/msi.c | 102 ---
> arch/powerpc/platforms/wsp/msi.h | 19 -
> arch/powerpc/platforms/wsp/opb_pic.c | 321 ---------
> arch/powerpc/platforms/wsp/psr2.c | 67 --
> arch/powerpc/platforms/wsp/scom_smp.c | 434 ------------
This (trivially) conflicts with commit 2751b628c97e ("powerpc: Fix SMP
issues with ppc64le ABIv2") in next-20140530.
> arch/powerpc/platforms/wsp/scom_wsp.c | 82 ---
> arch/powerpc/platforms/wsp/setup.c | 36 -
> arch/powerpc/platforms/wsp/smp.c | 88 ---
> arch/powerpc/platforms/wsp/wsp.c | 117 ----
> arch/powerpc/platforms/wsp/wsp.h | 29 -
> arch/powerpc/platforms/wsp/wsp_pci.c | 1134 --------------------------------
> arch/powerpc/platforms/wsp/wsp_pci.h | 268 --------
> 32 files changed, 1 insertion(+), 4249 deletions(-)
> delete mode 100644 arch/powerpc/configs/chroma_defconfig
> delete mode 100644 arch/powerpc/include/asm/wsp.h
> delete mode 100644 arch/powerpc/kernel/cpu_setup_a2.S
> delete mode 100644 arch/powerpc/platforms/wsp/Kconfig
> delete mode 100644 arch/powerpc/platforms/wsp/Makefile
> delete mode 100644 arch/powerpc/platforms/wsp/chroma.c
> delete mode 100644 arch/powerpc/platforms/wsp/h8.c
> delete mode 100644 arch/powerpc/platforms/wsp/ics.c
> delete mode 100644 arch/powerpc/platforms/wsp/ics.h
> delete mode 100644 arch/powerpc/platforms/wsp/msi.c
> delete mode 100644 arch/powerpc/platforms/wsp/msi.h
> delete mode 100644 arch/powerpc/platforms/wsp/opb_pic.c
> delete mode 100644 arch/powerpc/platforms/wsp/psr2.c
> delete mode 100644 arch/powerpc/platforms/wsp/scom_smp.c
> delete mode 100644 arch/powerpc/platforms/wsp/scom_wsp.c
> delete mode 100644 arch/powerpc/platforms/wsp/setup.c
> delete mode 100644 arch/powerpc/platforms/wsp/smp.c
> delete mode 100644 arch/powerpc/platforms/wsp/wsp.c
> delete mode 100644 arch/powerpc/platforms/wsp/wsp.h
> delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.c
> delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.h
For what it's worth, according to my scripts this doesn't introduce
Kconfig related regressions (eg, you've removed all references to the
Kconfig symbols that were removed). And, of course, that puzzling check
for CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS is now gone.
Thanks,
Paul Bolle
^ permalink raw reply
* [PATCH 2/2] powerpc/powernv: Enable POWER8 doorbell IPIs
From: Michael Neuling @ 2014-06-02 6:57 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Preeti U Murthy, linuxppc-dev, Paul Mackerras, Anton Blanchard
In-Reply-To: <1401692223-28337-1-git-send-email-mikey@neuling.org>
This patch enables POWER8 doorbell IPIs on powernv.
Since doorbells can only IPI within a core, we test to see when we can use
doorbells and if not we fall back to XICS. This also enables hypervisor
doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit.
Based on tests by Anton, the best case IPI latency between two threads dropped
from 894ns to 512ns.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/kernel/cpu_setup_power.S | 2 ++
arch/powerpc/platforms/powernv/smp.c | 6 ++++++
arch/powerpc/sysdev/xics/icp-native.c | 9 ++++++++-
3 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index 1557e7c..4673353 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -56,6 +56,7 @@ _GLOBAL(__setup_cpu_power8)
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
+ ori r3, r3, LPCR_PECEDH
bl __init_LPCR
bl __init_HFSCR
bl __init_tlb_power8
@@ -74,6 +75,7 @@ _GLOBAL(__restore_cpu_power8)
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
+ ori r3, r3, LPCR_PECEDH
bl __init_LPCR
bl __init_HFSCR
bl __init_tlb_power8
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 0062a43..5fcfcf4 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -32,6 +32,7 @@
#include <asm/opal.h>
#include <asm/runlatch.h>
#include <asm/code-patching.h>
+#include <asm/dbell.h>
#include "powernv.h"
@@ -46,6 +47,11 @@ static void pnv_smp_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
xics_setup_cpu();
+
+#ifdef CONFIG_PPC_DOORBELL
+ if (cpu_has_feature(CPU_FTR_DBELL))
+ doorbell_setup_this_cpu();
+#endif
}
int pnv_smp_kick_cpu(int nr)
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index 9dee470..de8d948 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -26,6 +26,7 @@
#include <asm/errno.h>
#include <asm/xics.h>
#include <asm/kvm_ppc.h>
+#include <asm/dbell.h>
struct icp_ipl {
union {
@@ -145,7 +146,13 @@ static unsigned int icp_native_get_irq(void)
static void icp_native_cause_ipi(int cpu, unsigned long data)
{
kvmppc_set_host_ipi(cpu, 1);
- icp_native_set_qirr(cpu, IPI_PRIORITY);
+#ifdef CONFIG_PPC_DOORBELL
+ if (cpu_has_feature(CPU_FTR_DBELL) &&
+ (cpumask_test_cpu(cpu, cpu_sibling_mask(smp_processor_id()))))
+ doorbell_cause_ipi(cpu, data);
+ else
+#endif
+ icp_native_set_qirr(cpu, IPI_PRIORITY);
}
void xics_wake_cpu(int cpu)
--
1.9.1
^ permalink raw reply related
* [PATCH 1/2] powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry
From: Michael Neuling @ 2014-06-02 6:57 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Preeti U Murthy, linuxppc-dev, Paul Mackerras, Anton Blanchard
Currently when entering fastsleep we clear all LPCR PECE bits.
This patch changes it to only clear the decrementer bit (ie. PECE1), which is
the only bit we really need to clear here. This is needed if we want to set
other wakeup causes like the PECEDH bit so we can use hypervisor doorbells on
powernv.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
drivers/cpuidle/cpuidle-powernv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 719f6fb..7f7798e 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -73,7 +73,7 @@ static int fastsleep_loop(struct cpuidle_device *dev,
return index;
new_lpcr = old_lpcr;
- new_lpcr &= ~(LPCR_MER | LPCR_PECE); /* lpcr[mer] must be 0 */
+ new_lpcr &= ~(LPCR_MER | LPCR_PECE1); /* lpcr[mer] must be 0 */
/* exit powersave upon external interrupt, but not decrementer
* interrupt.
--
1.9.1
^ permalink raw reply related
* [PATCH] powerpc: Remove platforms/wsp and associated pieces
From: Michael Ellerman @ 2014-06-02 1:20 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Stephen Rothwell, pebolle, Jimi Xenidis
__attribute__ ((unused))
WSP is the last user of CONFIG_PPC_A2, so we remove that as well.
Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/Kconfig.debug | 5 -
arch/powerpc/configs/chroma_defconfig | 307 ---------
arch/powerpc/include/asm/mmu-book3e.h | 4 -
arch/powerpc/include/asm/reg_a2.h | 9 -
arch/powerpc/include/asm/wsp.h | 14 -
arch/powerpc/kernel/Makefile | 1 -
arch/powerpc/kernel/cpu_setup_a2.S | 120 ----
arch/powerpc/kernel/cputable.c | 38 --
arch/powerpc/kernel/exceptions-64e.S | 16 -
arch/powerpc/kernel/udbg.c | 2 -
arch/powerpc/kernel/udbg_16550.c | 11 -
arch/powerpc/platforms/Kconfig | 1 -
arch/powerpc/platforms/Kconfig.cputype | 6 +-
arch/powerpc/platforms/Makefile | 1 -
arch/powerpc/platforms/wsp/Kconfig | 30 -
arch/powerpc/platforms/wsp/Makefile | 10 -
arch/powerpc/platforms/wsp/chroma.c | 56 --
arch/powerpc/platforms/wsp/h8.c | 135 ----
arch/powerpc/platforms/wsp/ics.c | 762 ---------------------
arch/powerpc/platforms/wsp/ics.h | 25 -
arch/powerpc/platforms/wsp/msi.c | 102 ---
arch/powerpc/platforms/wsp/msi.h | 19 -
arch/powerpc/platforms/wsp/opb_pic.c | 321 ---------
arch/powerpc/platforms/wsp/psr2.c | 67 --
arch/powerpc/platforms/wsp/scom_smp.c | 434 ------------
arch/powerpc/platforms/wsp/scom_wsp.c | 82 ---
arch/powerpc/platforms/wsp/setup.c | 36 -
arch/powerpc/platforms/wsp/smp.c | 88 ---
arch/powerpc/platforms/wsp/wsp.c | 117 ----
arch/powerpc/platforms/wsp/wsp.h | 29 -
arch/powerpc/platforms/wsp/wsp_pci.c | 1134 --------------------------------
arch/powerpc/platforms/wsp/wsp_pci.h | 268 --------
32 files changed, 1 insertion(+), 4249 deletions(-)
delete mode 100644 arch/powerpc/configs/chroma_defconfig
delete mode 100644 arch/powerpc/include/asm/wsp.h
delete mode 100644 arch/powerpc/kernel/cpu_setup_a2.S
delete mode 100644 arch/powerpc/platforms/wsp/Kconfig
delete mode 100644 arch/powerpc/platforms/wsp/Makefile
delete mode 100644 arch/powerpc/platforms/wsp/chroma.c
delete mode 100644 arch/powerpc/platforms/wsp/h8.c
delete mode 100644 arch/powerpc/platforms/wsp/ics.c
delete mode 100644 arch/powerpc/platforms/wsp/ics.h
delete mode 100644 arch/powerpc/platforms/wsp/msi.c
delete mode 100644 arch/powerpc/platforms/wsp/msi.h
delete mode 100644 arch/powerpc/platforms/wsp/opb_pic.c
delete mode 100644 arch/powerpc/platforms/wsp/psr2.c
delete mode 100644 arch/powerpc/platforms/wsp/scom_smp.c
delete mode 100644 arch/powerpc/platforms/wsp/scom_wsp.c
delete mode 100644 arch/powerpc/platforms/wsp/setup.c
delete mode 100644 arch/powerpc/platforms/wsp/smp.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp.h
delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.c
delete mode 100644 arch/powerpc/platforms/wsp/wsp_pci.h
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 21c9f30..790352f 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -235,11 +235,6 @@ config PPC_EARLY_DEBUG_USBGECKO
Select this to enable early debugging for Nintendo GameCube/Wii
consoles via an external USB Gecko adapter.
-config PPC_EARLY_DEBUG_WSP
- bool "Early debugging via WSP's internal UART"
- depends on PPC_WSP
- select PPC_UDBG_16550
-
config PPC_EARLY_DEBUG_PS3GELIC
bool "Early debugging through the PS3 Ethernet port"
depends on PPC_PS3
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
deleted file mode 100644
index 4f35fc4..0000000
--- a/arch/powerpc/configs/chroma_defconfig
+++ /dev/null
@@ -1,307 +0,0 @@
-CONFIG_PPC64=y
-CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=256
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEMCG_SWAP=y
-CONFIG_NAMESPACES=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_SCOM_DEBUGFS=y
-CONFIG_PPC_A2_DD2=y
-CONFIG_KVM_GUEST=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_NUMA=y
-# CONFIG_MIGRATION is not set
-CONFIG_PPC_64K_PAGES=y
-CONFIG_SCHED_SMT=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE=""
-# CONFIG_SECCOMP is not set
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NET_TCPPROBE=y
-# CONFIG_WIRELESS is not set
-CONFIG_NET_9P=y
-CONFIG_NET_9P_DEBUG=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_MISC_DEVICES=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_SIL=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_MARVELL=y
-CONFIG_PATA_SIL680=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_E1000E=y
-CONFIG_TIGON3=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1511=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_PPC_EMULATED_STATS=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 901dac6..d0918e0 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -223,10 +223,6 @@ typedef struct {
unsigned int id;
unsigned int active;
unsigned long vdso_base;
-#ifdef CONFIG_PPC_ICSWX
- struct spinlock *cop_lockp; /* guard cop related stuff */
- unsigned long acop; /* mask of enabled coprocessor types */
-#endif /* CONFIG_PPC_ICSWX */
#ifdef CONFIG_PPC_MM_SLICES
u64 low_slices_psize; /* SLB page size encodings */
u64 high_slices_psize; /* 4 bits per slice for now */
diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h
index 3d52a11..3ba9c6f 100644
--- a/arch/powerpc/include/asm/reg_a2.h
+++ b/arch/powerpc/include/asm/reg_a2.h
@@ -110,15 +110,6 @@
#define TLB1_UR ASM_CONST(0x0000000000000002)
#define TLB1_SR ASM_CONST(0x0000000000000001)
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-#define WSP_UART_PHYS 0xffc000c000
-/* This needs to be careful chosen to hit a !0 congruence class
- * in the TLB since we bolt it in way 3, which is already occupied
- * by our linear mapping primary bolted entry in CC 0.
- */
-#define WSP_UART_VIRT 0xf000000000001000
-#endif
-
/* A2 erativax attributes definitions */
#define ERATIVAX_RS_IS_ALL 0x000
#define ERATIVAX_RS_IS_TID 0x040
diff --git a/arch/powerpc/include/asm/wsp.h b/arch/powerpc/include/asm/wsp.h
deleted file mode 100644
index c7dc830..0000000
--- a/arch/powerpc/include/asm/wsp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_POWERPC_WSP_H
-#define __ASM_POWERPC_WSP_H
-
-extern int wsp_get_chip_id(struct device_node *dn);
-
-#endif /* __ASM_POWERPC_WSP_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index fcc9a89..7e5f89b 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
-obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
deleted file mode 100644
index 61f079e..0000000
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * A2 specific assembly support code
- *
- * Copyright 2009 Ben Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-offsets.h>
-#include <asm/ppc_asm.h>
-#include <asm/ppc-opcode.h>
-#include <asm/processor.h>
-#include <asm/reg_a2.h>
-#include <asm/reg.h>
-#include <asm/thread_info.h>
-
-/*
- * Disable thdid and class fields in ERATs to bump PID to full 14 bits capacity.
- * This also prevents external LPID accesses but that isn't a problem when not a
- * guest. Under PV, this setting will be ignored and MMUCR will return the right
- * number of PID bits we can use.
- */
-#define MMUCR1_EXTEND_PID \
- (MMUCR1_ICTID | MMUCR1_ITTID | MMUCR1_DCTID | \
- MMUCR1_DTTID | MMUCR1_DCCD)
-
-/*
- * Use extended PIDs if enabled.
- * Don't clear the ERATs on context sync events and enable I & D LRU.
- * Enable ERAT back invalidate when tlbwe overwrites an entry.
- */
-#define INITIAL_MMUCR1 \
- (MMUCR1_EXTEND_PID | MMUCR1_CSINV_NEVER | MMUCR1_IRRE | \
- MMUCR1_DRRE | MMUCR1_TLBWE_BINV)
-
-_GLOBAL(__setup_cpu_a2)
- /* Some of these are actually thread local and some are
- * core local but doing it always won't hurt
- */
-
-#ifdef CONFIG_PPC_ICSWX
- /* Make sure ACOP starts out as zero */
- li r3,0
- mtspr SPRN_ACOP,r3
-
- /* Skip the following if we are in Guest mode */
- mfmsr r3
- andis. r0,r3,MSR_GS@h
- bne _icswx_skip_guest
-
- /* Enable icswx instruction */
- mfspr r3,SPRN_A2_CCR2
- ori r3,r3,A2_CCR2_ENABLE_ICSWX
- mtspr SPRN_A2_CCR2,r3
-
- /* Unmask all CTs in HACOP */
- li r3,-1
- mtspr SPRN_HACOP,r3
-_icswx_skip_guest:
-#endif /* CONFIG_PPC_ICSWX */
-
- /* Enable doorbell */
- mfspr r3,SPRN_A2_CCR2
- oris r3,r3,A2_CCR2_ENABLE_PC@h
- mtspr SPRN_A2_CCR2,r3
- isync
-
- /* Setup CCR0 to disable power saving for now as it's busted
- * in the current implementations. Setup CCR1 to wake on
- * interrupts normally (we write the default value but who
- * knows what FW may have clobbered...)
- */
- li r3,0
- mtspr SPRN_A2_CCR0, r3
- LOAD_REG_IMMEDIATE(r3,0x0f0f0f0f)
- mtspr SPRN_A2_CCR1, r3
-
- /* Initialise MMUCR1 */
- lis r3,INITIAL_MMUCR1@h
- ori r3,r3,INITIAL_MMUCR1@l
- mtspr SPRN_MMUCR1,r3
-
- /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
- LOAD_REG_IMMEDIATE(r3, 0x000a7531)
- mtspr SPRN_MMUCR2,r3
-
- /* Set MMUCR3 to write all thids bit to the TLB */
- LOAD_REG_IMMEDIATE(r3, 0x0000000f)
- mtspr SPRN_MMUCR3,r3
-
- /* Don't do ERAT stuff if running guest mode */
- mfmsr r3
- andis. r0,r3,MSR_GS@h
- bne 1f
-
- /* Now set the I-ERAT watermark to 15 */
- lis r4,(MMUCR0_TLBSEL_I|MMUCR0_ECL)@h
- mtspr SPRN_MMUCR0, r4
- li r4,A2_IERAT_SIZE-1
- PPC_ERATWE(R4,R4,3)
-
- /* Now set the D-ERAT watermark to 31 */
- lis r4,(MMUCR0_TLBSEL_D|MMUCR0_ECL)@h
- mtspr SPRN_MMUCR0, r4
- li r4,A2_DERAT_SIZE-1
- PPC_ERATWE(R4,R4,3)
-
- /* And invalidate the beast just in case. That won't get rid of
- * a bolted entry though it will be in LRU and so will go away eventually
- * but let's not bother for now
- */
- PPC_ERATILX(0,0,R0)
-1:
- blr
-
-_GLOBAL(__restore_cpu_a2)
- b __setup_cpu_a2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index c1faade..ba76730 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2148,44 +2148,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
}
#endif /* CONFIG_PPC32 */
#endif /* CONFIG_E500 */
-
-#ifdef CONFIG_PPC_A2
- { /* Standard A2 (>= DD2) + FPU core */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x00480000,
- .cpu_name = "A2 (>= DD2)",
- .cpu_features = CPU_FTRS_A2,
- .cpu_user_features = COMMON_USER_PPC64,
- .mmu_features = MMU_FTRS_A2,
- .icache_bsize = 64,
- .dcache_bsize = 64,
- .num_pmcs = 0,
- .cpu_setup = __setup_cpu_a2,
- .cpu_restore = __restore_cpu_a2,
- .machine_check = machine_check_generic,
- .platform = "ppca2",
- },
- { /* This is a default entry to get going, to be replaced by
- * a real one at some stage
- */
-#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \
- CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
- CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
- .pvr_mask = 0x00000000,
- .pvr_value = 0x00000000,
- .cpu_name = "Book3E",
- .cpu_features = CPU_FTRS_BASE_BOOK3E,
- .cpu_user_features = COMMON_USER_PPC64,
- .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
- MMU_FTR_USE_TLBIVAX_BCAST |
- MMU_FTR_LOCK_BCAST_INVAL,
- .icache_bsize = 64,
- .dcache_bsize = 64,
- .num_pmcs = 0,
- .machine_check = machine_check_generic,
- .platform = "power6",
- },
-#endif /* CONFIG_PPC_A2 */
};
static struct cpu_spec the_cpu_spec;
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c1bee3c..720cfd9 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1467,22 +1467,6 @@ a2_tlbinit_after_linear_map:
.globl a2_tlbinit_after_iprot_flush
a2_tlbinit_after_iprot_flush:
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
- /* Now establish early debug mappings if applicable */
- /* Restore the MAS0 we used for linear mapping load */
- mtspr SPRN_MAS0,r11
-
- lis r3,(MAS1_VALID | MAS1_IPROT)@h
- ori r3,r3,(BOOK3E_PAGESZ_4K << MAS1_TSIZE_SHIFT)
- mtspr SPRN_MAS1,r3
- LOAD_REG_IMMEDIATE(r3, WSP_UART_VIRT | MAS2_I | MAS2_G)
- mtspr SPRN_MAS2,r3
- LOAD_REG_IMMEDIATE(r3, WSP_UART_PHYS | MAS3_SR | MAS3_SW)
- mtspr SPRN_MAS7_MAS3,r3
- /* re-use the MAS8 value from the linear mapping */
- tlbwe
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
-
PPC_TLBILX(0,0,R0)
sync
isync
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index a158375..b7aa072 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -62,8 +62,6 @@ void __init udbg_early_init(void)
udbg_init_cpm();
#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
udbg_init_usbgecko();
-#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
- udbg_init_wsp();
#elif defined(CONFIG_PPC_EARLY_DEBUG_MEMCONS)
/* In memory console */
udbg_init_memcons();
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 75702e2..6e7c492 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -296,14 +296,3 @@ void __init udbg_init_40x_realmode(void)
}
#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
-
-
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-
-void __init udbg_init_wsp(void)
-{
- udbg_uart_init_mmio((void *)WSP_UART_VIRT, 1);
- udbg_uart_setup(57600, 50000000);
-}
-
-#endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index bf9c6d4..391b3f6 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -19,7 +19,6 @@ source "arch/powerpc/platforms/embedded6xx/Kconfig"
source "arch/powerpc/platforms/44x/Kconfig"
source "arch/powerpc/platforms/40x/Kconfig"
source "arch/powerpc/platforms/amigaone/Kconfig"
-source "arch/powerpc/platforms/wsp/Kconfig"
config KVM_GUEST
bool "KVM Guest support"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d9e2b19..eb7eb73 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -148,10 +148,6 @@ config POWER4
depends on PPC64 && PPC_BOOK3S
def_bool y
-config PPC_A2
- bool
- depends on PPC_BOOK3E_64
-
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
depends on PPC64 && PPC_BOOK3S
@@ -280,7 +276,7 @@ config VSX
config PPC_ICSWX
bool "Support for PowerPC icswx coprocessor instruction"
- depends on POWER4 || PPC_A2
+ depends on POWER4
default n
---help---
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 879b4a4..469ef17 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -22,4 +22,3 @@ obj-$(CONFIG_PPC_CELL) += cell/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/
obj-$(CONFIG_AMIGAONE) += amigaone/
-obj-$(CONFIG_PPC_WSP) += wsp/
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
deleted file mode 100644
index 422a175..0000000
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-config PPC_WSP
- bool
- select PPC_A2
- select GENERIC_TBSYNC
- select PPC_ICSWX
- select PPC_SCOM
- select PPC_XICS
- select PPC_ICP_NATIVE
- select PCI
- select PPC_IO_WORKAROUNDS if PCI
- select PPC_INDIRECT_PIO if PCI
- default n
-
-menu "WSP platform selection"
- depends on PPC_BOOK3E_64
-
-config PPC_PSR2
- bool "PowerEN System Reference Platform 2"
- select EPAPR_BOOT
- select PPC_WSP
- default y
-
-config PPC_CHROMA
- bool "PowerEN PCIe Chroma Card"
- select EPAPR_BOOT
- select PPC_WSP
- select OF_DYNAMIC
- default y
-
-endmenu
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
deleted file mode 100644
index 162fc60..0000000
--- a/arch/powerpc/platforms/wsp/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-ccflags-y += $(NO_MINIMAL_TOC)
-
-obj-y += setup.o ics.o wsp.o
-obj-$(CONFIG_PPC_PSR2) += psr2.o
-obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o
-obj-$(CONFIG_PPC_WSP) += opb_pic.o
-obj-$(CONFIG_PPC_WSP) += scom_wsp.o
-obj-$(CONFIG_SMP) += smp.o scom_smp.o
-obj-$(CONFIG_PCI) += wsp_pci.o
-obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
deleted file mode 100644
index aaa46b3..0000000
--- a/arch/powerpc/platforms/wsp/chroma.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/of_fdt.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-void __init chroma_setup_arch(void)
-{
- wsp_setup_arch();
- wsp_setup_h8();
-
-}
-
-static int __init chroma_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
- return 0;
-
- return 1;
-}
-
-define_machine(chroma_md) {
- .name = "Chroma PCIe",
- .probe = chroma_probe,
- .setup_arch = chroma_setup_arch,
- .restart = wsp_h8_restart,
- .power_off = wsp_h8_power_off,
- .halt = wsp_halt,
- .calibrate_decr = generic_calibrate_decr,
- .init_IRQ = wsp_setup_irq,
- .progress = udbg_progress,
- .power_save = book3e_idle,
-};
-
-machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
deleted file mode 100644
index a3c87f3..0000000
--- a/arch/powerpc/platforms/wsp/h8.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-
-#include "wsp.h"
-
-/*
- * The UART connection to the H8 is over ttyS1 which is just a 16550.
- * We assume that FW has it setup right and no one messes with it.
- */
-
-
-static u8 __iomem *h8;
-
-#define RBR 0 /* Receiver Buffer Register */
-#define THR 0 /* Transmitter Holding Register */
-#define LSR 5 /* Line Status Register */
-#define LSR_DR 0x01 /* LSR value for Data-Ready */
-#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */
-static void wsp_h8_putc(int c)
-{
- u8 lsr;
-
- do {
- lsr = readb(h8 + LSR);
- } while ((lsr & LSR_THRE) != LSR_THRE);
- writeb(c, h8 + THR);
-}
-
-static int wsp_h8_getc(void)
-{
- u8 lsr;
-
- do {
- lsr = readb(h8 + LSR);
- } while ((lsr & LSR_DR) != LSR_DR);
-
- return readb(h8 + RBR);
-}
-
-static void wsp_h8_puts(const char *s, int sz)
-{
- int i;
-
- for (i = 0; i < sz; i++) {
- wsp_h8_putc(s[i]);
-
- /* no flow control so wait for echo */
- wsp_h8_getc();
- }
- wsp_h8_putc('\r');
- wsp_h8_putc('\n');
-}
-
-static void wsp_h8_terminal_cmd(const char *cmd, int sz)
-{
- hard_irq_disable();
- wsp_h8_puts(cmd, sz);
- /* should never return, but just in case */
- for (;;)
- continue;
-}
-
-
-void wsp_h8_restart(char *cmd)
-{
- static const char restart[] = "warm-reset";
-
- (void)cmd;
- wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
-}
-
-void wsp_h8_power_off(void)
-{
- static const char off[] = "power-off";
-
- wsp_h8_terminal_cmd(off, sizeof(off) - 1);
-}
-
-static void __iomem *wsp_h8_getaddr(void)
-{
- struct device_node *aliases;
- struct device_node *uart;
- struct property *path;
- void __iomem *va = NULL;
-
- /*
- * there is nothing in the devtree to tell us which is mapped
- * to the H8, but se know it is the second serial port.
- */
-
- aliases = of_find_node_by_path("/aliases");
- if (aliases == NULL)
- return NULL;
-
- path = of_find_property(aliases, "serial1", NULL);
- if (path == NULL)
- goto out;
-
- uart = of_find_node_by_path(path->value);
- if (uart == NULL)
- goto out;
-
- va = of_iomap(uart, 0);
-
- /* remove it so no one messes with it */
- of_detach_node(uart);
- of_node_put(uart);
-
-out:
- of_node_put(aliases);
-
- return va;
-}
-
-void __init wsp_setup_h8(void)
-{
- h8 = wsp_h8_getaddr();
-
- /* Devtree change? lets hard map it anyway */
- if (h8 == NULL) {
- pr_warn("UART to H8 could not be found");
- h8 = ioremap(0xffc0008000ULL, 0x100);
- }
-}
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
deleted file mode 100644
index 9cd92e6..0000000
--- a/arch/powerpc/platforms/wsp/ics.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * Copyright 2008-2011 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/xics.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-
-/* WSP ICS */
-
-struct wsp_ics {
- struct ics ics;
- struct device_node *dn;
- void __iomem *regs;
- spinlock_t lock;
- unsigned long *bitmap;
- u32 chip_id;
- u32 lsi_base;
- u32 lsi_count;
- u64 hwirq_start;
- u64 count;
-#ifdef CONFIG_SMP
- int *hwirq_cpu_map;
-#endif
-};
-
-#define to_wsp_ics(ics) container_of(ics, struct wsp_ics, ics)
-
-#define INT_SRC_LAYER_BUID_REG(base) ((base) + 0x00)
-#define IODA_TBL_ADDR_REG(base) ((base) + 0x18)
-#define IODA_TBL_DATA_REG(base) ((base) + 0x20)
-#define XIVE_UPDATE_REG(base) ((base) + 0x28)
-#define ICS_INT_CAPS_REG(base) ((base) + 0x30)
-
-#define TBL_AUTO_INCREMENT ((1UL << 63) | (1UL << 15))
-#define TBL_SELECT_XIST (1UL << 48)
-#define TBL_SELECT_XIVT (1UL << 49)
-
-#define IODA_IRQ(irq) ((irq) & (0x7FFULL)) /* HRM 5.1.3.4 */
-
-#define XIST_REQUIRED 0x8
-#define XIST_REJECTED 0x4
-#define XIST_PRESENTED 0x2
-#define XIST_PENDING 0x1
-
-#define XIVE_SERVER_SHIFT 42
-#define XIVE_SERVER_MASK 0xFFFFULL
-#define XIVE_PRIORITY_MASK 0xFFULL
-#define XIVE_PRIORITY_SHIFT 32
-#define XIVE_WRITE_ENABLE (1ULL << 63)
-
-/*
- * The docs refer to a 6 bit field called ChipID, which consists of a
- * 3 bit NodeID and a 3 bit ChipID. On WSP the ChipID is always zero
- * so we ignore it, and every where we use "chip id" in this code we
- * mean the NodeID.
- */
-#define WSP_ICS_CHIP_SHIFT 17
-
-
-static struct wsp_ics *ics_list;
-static int num_ics;
-
-/* ICS Source controller accessors */
-
-static u64 wsp_ics_get_xive(struct wsp_ics *ics, unsigned int irq)
-{
- unsigned long flags;
- u64 xive;
-
- spin_lock_irqsave(&ics->lock, flags);
- out_be64(IODA_TBL_ADDR_REG(ics->regs), TBL_SELECT_XIVT | IODA_IRQ(irq));
- xive = in_be64(IODA_TBL_DATA_REG(ics->regs));
- spin_unlock_irqrestore(&ics->lock, flags);
-
- return xive;
-}
-
-static void wsp_ics_set_xive(struct wsp_ics *ics, unsigned int irq, u64 xive)
-{
- xive &= ~XIVE_ADDR_MASK;
- xive |= (irq & XIVE_ADDR_MASK);
- xive |= XIVE_WRITE_ENABLE;
-
- out_be64(XIVE_UPDATE_REG(ics->regs), xive);
-}
-
-static u64 xive_set_server(u64 xive, unsigned int server)
-{
- u64 mask = ~(XIVE_SERVER_MASK << XIVE_SERVER_SHIFT);
-
- xive &= mask;
- xive |= (server & XIVE_SERVER_MASK) << XIVE_SERVER_SHIFT;
-
- return xive;
-}
-
-static u64 xive_set_priority(u64 xive, unsigned int priority)
-{
- u64 mask = ~(XIVE_PRIORITY_MASK << XIVE_PRIORITY_SHIFT);
-
- xive &= mask;
- xive |= (priority & XIVE_PRIORITY_MASK) << XIVE_PRIORITY_SHIFT;
-
- return xive;
-}
-
-
-#ifdef CONFIG_SMP
-/* Find logical CPUs within mask on a given chip and store result in ret */
-void cpus_on_chip(int chip_id, cpumask_t *mask, cpumask_t *ret)
-{
- int cpu, chip;
- struct device_node *cpu_dn, *dn;
- const u32 *prop;
-
- cpumask_clear(ret);
- for_each_cpu(cpu, mask) {
- cpu_dn = of_get_cpu_node(cpu, NULL);
- if (!cpu_dn)
- continue;
-
- prop = of_get_property(cpu_dn, "at-node", NULL);
- if (!prop) {
- of_node_put(cpu_dn);
- continue;
- }
-
- dn = of_find_node_by_phandle(*prop);
- of_node_put(cpu_dn);
-
- chip = wsp_get_chip_id(dn);
- if (chip == chip_id)
- cpumask_set_cpu(cpu, ret);
-
- of_node_put(dn);
- }
-}
-
-/* Store a suitable CPU to handle a hwirq in the ics->hwirq_cpu_map cache */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
- const cpumask_t *affinity)
-{
- cpumask_var_t avail, newmask;
- int ret = -ENOMEM, cpu, cpu_rover = 0, target;
- int index = hwirq - ics->hwirq_start;
- unsigned int nodeid;
-
- BUG_ON(index < 0 || index >= ics->count);
-
- if (!ics->hwirq_cpu_map)
- return -ENOMEM;
-
- if (!distribute_irqs) {
- ics->hwirq_cpu_map[hwirq - ics->hwirq_start] = xics_default_server;
- return 0;
- }
-
- /* Allocate needed CPU masks */
- if (!alloc_cpumask_var(&avail, GFP_KERNEL))
- goto ret;
- if (!alloc_cpumask_var(&newmask, GFP_KERNEL))
- goto freeavail;
-
- /* Find PBus attached to the source of this IRQ */
- nodeid = (hwirq >> WSP_ICS_CHIP_SHIFT) & 0x3; /* 12:14 */
-
- /* Find CPUs that could handle this IRQ */
- if (affinity)
- cpumask_and(avail, cpu_online_mask, affinity);
- else
- cpumask_copy(avail, cpu_online_mask);
-
- /* Narrow selection down to logical CPUs on the same chip */
- cpus_on_chip(nodeid, avail, newmask);
-
- /* Ensure we haven't narrowed it down to 0 */
- if (unlikely(cpumask_empty(newmask))) {
- if (unlikely(cpumask_empty(avail))) {
- ret = -1;
- goto out;
- }
- cpumask_copy(newmask, avail);
- }
-
- /* Choose a CPU out of those we narrowed it down to in round robin */
- target = hwirq % cpumask_weight(newmask);
- for_each_cpu(cpu, newmask) {
- if (cpu_rover++ >= target) {
- ics->hwirq_cpu_map[index] = get_hard_smp_processor_id(cpu);
- ret = 0;
- goto out;
- }
- }
-
- /* Shouldn't happen */
- WARN_ON(1);
-
-out:
- free_cpumask_var(newmask);
-freeavail:
- free_cpumask_var(avail);
-ret:
- if (ret < 0) {
- ics->hwirq_cpu_map[index] = cpumask_first(cpu_online_mask);
- pr_warning("Error, falling hwirq 0x%x routing back to CPU %i\n",
- hwirq, ics->hwirq_cpu_map[index]);
- }
- return ret;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics)
-{
- int i;
-
- ics->hwirq_cpu_map = kmalloc(sizeof(int) * ics->count, GFP_KERNEL);
- if (!ics->hwirq_cpu_map) {
- pr_warning("Allocate hwirq_cpu_map failed, "
- "IRQ balancing disabled\n");
- return;
- }
-
- for (i=0; i < ics->count; i++)
- ics->hwirq_cpu_map[i] = xics_default_server;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
- int index = hwirq - ics->hwirq_start;
-
- BUG_ON(index < 0 || index >= ics->count);
-
- if (!ics->hwirq_cpu_map)
- return xics_default_server;
-
- return ics->hwirq_cpu_map[index];
-}
-#else /* !CONFIG_SMP */
-static int cache_hwirq_map(struct wsp_ics *ics, unsigned int hwirq,
- const cpumask_t *affinity)
-{
- return 0;
-}
-
-static int get_irq_server(struct wsp_ics *ics, unsigned int hwirq)
-{
- return xics_default_server;
-}
-
-static void alloc_irq_map(struct wsp_ics *ics) { }
-#endif
-
-static void wsp_chip_unmask_irq(struct irq_data *d)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics;
- int server;
- u64 xive;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return;
-
- ics = d->chip_data;
- if (WARN_ON(!ics))
- return;
-
- server = get_irq_server(ics, hw_irq);
-
- xive = wsp_ics_get_xive(ics, hw_irq);
- xive = xive_set_server(xive, server);
- xive = xive_set_priority(xive, DEFAULT_PRIORITY);
- wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static unsigned int wsp_chip_startup(struct irq_data *d)
-{
- /* unmask it */
- wsp_chip_unmask_irq(d);
- return 0;
-}
-
-static void wsp_mask_real_irq(unsigned int hw_irq, struct wsp_ics *ics)
-{
- u64 xive;
-
- if (hw_irq == XICS_IPI)
- return;
-
- if (WARN_ON(!ics))
- return;
- xive = wsp_ics_get_xive(ics, hw_irq);
- xive = xive_set_server(xive, xics_default_server);
- xive = xive_set_priority(xive, LOWEST_PRIORITY);
- wsp_ics_set_xive(ics, hw_irq, xive);
-}
-
-static void wsp_chip_mask_irq(struct irq_data *d)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics = d->chip_data;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return;
-
- wsp_mask_real_irq(hw_irq, ics);
-}
-
-static int wsp_chip_set_affinity(struct irq_data *d,
- const struct cpumask *cpumask, bool force)
-{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct wsp_ics *ics;
- int ret;
- u64 xive;
-
- if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
- return -1;
-
- ics = d->chip_data;
- if (WARN_ON(!ics))
- return -1;
- xive = wsp_ics_get_xive(ics, hw_irq);
-
- /*
- * For the moment only implement delivery to all cpus or one cpu.
- * Get current irq_server for the given irq
- */
- ret = cache_hwirq_map(ics, hw_irq, cpumask);
- if (ret == -1) {
- char cpulist[128];
- cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
- pr_warning("%s: No online cpus in the mask %s for irq %d\n",
- __func__, cpulist, d->irq);
- return -1;
- } else if (ret == -ENOMEM) {
- pr_warning("%s: Out of memory\n", __func__);
- return -1;
- }
-
- xive = xive_set_server(xive, get_irq_server(ics, hw_irq));
- wsp_ics_set_xive(ics, hw_irq, xive);
-
- return IRQ_SET_MASK_OK;
-}
-
-static struct irq_chip wsp_irq_chip = {
- .name = "WSP ICS",
- .irq_startup = wsp_chip_startup,
- .irq_mask = wsp_chip_mask_irq,
- .irq_unmask = wsp_chip_unmask_irq,
- .irq_set_affinity = wsp_chip_set_affinity
-};
-
-static int wsp_ics_host_match(struct ics *ics, struct device_node *dn)
-{
- /* All ICSs in the system implement a global irq number space,
- * so match against them all. */
- return of_device_is_compatible(dn, "ibm,ppc-xics");
-}
-
-static int wsp_ics_match_hwirq(struct wsp_ics *wsp_ics, unsigned int hwirq)
-{
- if (hwirq >= wsp_ics->hwirq_start &&
- hwirq < wsp_ics->hwirq_start + wsp_ics->count)
- return 1;
-
- return 0;
-}
-
-static int wsp_ics_map(struct ics *ics, unsigned int virq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
- unsigned int hw_irq = virq_to_hw(virq);
- unsigned long flags;
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return -ENOENT;
-
- irq_set_chip_and_handler(virq, &wsp_irq_chip, handle_fasteoi_irq);
-
- irq_set_chip_data(virq, wsp_ics);
-
- spin_lock_irqsave(&wsp_ics->lock, flags);
- bitmap_allocate_region(wsp_ics->bitmap, hw_irq - wsp_ics->hwirq_start, 0);
- spin_unlock_irqrestore(&wsp_ics->lock, flags);
-
- return 0;
-}
-
-static void wsp_ics_mask_unknown(struct ics *ics, unsigned long hw_irq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return;
-
- pr_err("%s: IRQ %lu (real) is invalid, disabling it.\n", __func__, hw_irq);
- wsp_mask_real_irq(hw_irq, wsp_ics);
-}
-
-static long wsp_ics_get_server(struct ics *ics, unsigned long hw_irq)
-{
- struct wsp_ics *wsp_ics = to_wsp_ics(ics);
-
- if (!wsp_ics_match_hwirq(wsp_ics, hw_irq))
- return -ENOENT;
-
- return get_irq_server(wsp_ics, hw_irq);
-}
-
-/* HW Number allocation API */
-
-static struct wsp_ics *wsp_ics_find_dn_ics(struct device_node *dn)
-{
- struct device_node *iparent;
- int i;
-
- iparent = of_irq_find_parent(dn);
- if (!iparent) {
- pr_err("wsp_ics: Failed to find interrupt parent!\n");
- return NULL;
- }
-
- for(i = 0; i < num_ics; i++) {
- if(ics_list[i].dn == iparent)
- break;
- }
-
- if (i >= num_ics) {
- pr_err("wsp_ics: Unable to find parent bitmap!\n");
- return NULL;
- }
-
- return &ics_list[i];
-}
-
-int wsp_ics_alloc_irq(struct device_node *dn, int num)
-{
- struct wsp_ics *ics;
- int order, offset;
-
- ics = wsp_ics_find_dn_ics(dn);
- if (!ics)
- return -ENODEV;
-
- /* Fast, but overly strict if num isn't a power of two */
- order = get_count_order(num);
-
- spin_lock_irq(&ics->lock);
- offset = bitmap_find_free_region(ics->bitmap, ics->count, order);
- spin_unlock_irq(&ics->lock);
-
- if (offset < 0)
- return offset;
-
- return offset + ics->hwirq_start;
-}
-
-void wsp_ics_free_irq(struct device_node *dn, unsigned int irq)
-{
- struct wsp_ics *ics;
-
- ics = wsp_ics_find_dn_ics(dn);
- if (WARN_ON(!ics))
- return;
-
- spin_lock_irq(&ics->lock);
- bitmap_release_region(ics->bitmap, irq, 0);
- spin_unlock_irq(&ics->lock);
-}
-
-/* Initialisation */
-
-static int __init wsp_ics_bitmap_setup(struct wsp_ics *ics,
- struct device_node *dn)
-{
- int len, i, j, size;
- u32 start, count;
- const u32 *p;
-
- size = BITS_TO_LONGS(ics->count) * sizeof(long);
- ics->bitmap = kzalloc(size, GFP_KERNEL);
- if (!ics->bitmap) {
- pr_err("wsp_ics: ENOMEM allocating IRQ bitmap!\n");
- return -ENOMEM;
- }
-
- spin_lock_init(&ics->lock);
-
- p = of_get_property(dn, "available-ranges", &len);
- if (!p || !len) {
- /* FIXME this should be a WARN() once mambo is updated */
- pr_err("wsp_ics: No available-ranges defined for %s\n",
- dn->full_name);
- return 0;
- }
-
- if (len % (2 * sizeof(u32)) != 0) {
- /* FIXME this should be a WARN() once mambo is updated */
- pr_err("wsp_ics: Invalid available-ranges for %s\n",
- dn->full_name);
- return 0;
- }
-
- bitmap_fill(ics->bitmap, ics->count);
-
- for (i = 0; i < len / sizeof(u32); i += 2) {
- start = of_read_number(p + i, 1);
- count = of_read_number(p + i + 1, 1);
-
- pr_devel("%s: start: %d count: %d\n", __func__, start, count);
-
- if ((start + count) > (ics->hwirq_start + ics->count) ||
- start < ics->hwirq_start) {
- pr_err("wsp_ics: Invalid range! -> %d to %d\n",
- start, start + count);
- break;
- }
-
- for (j = 0; j < count; j++)
- bitmap_release_region(ics->bitmap,
- (start + j) - ics->hwirq_start, 0);
- }
-
- /* Ensure LSIs are not available for allocation */
- bitmap_allocate_region(ics->bitmap, ics->lsi_base,
- get_count_order(ics->lsi_count));
-
- return 0;
-}
-
-static int __init wsp_ics_setup(struct wsp_ics *ics, struct device_node *dn)
-{
- u32 lsi_buid, msi_buid, msi_base, msi_count;
- void __iomem *regs;
- const u32 *p;
- int rc, len, i;
- u64 caps, buid;
-
- p = of_get_property(dn, "interrupt-ranges", &len);
- if (!p || len < (2 * sizeof(u32))) {
- pr_err("wsp_ics: No/bad interrupt-ranges found on %s\n",
- dn->full_name);
- return -ENOENT;
- }
-
- if (len > (2 * sizeof(u32))) {
- pr_err("wsp_ics: Multiple ics ranges not supported.\n");
- return -EINVAL;
- }
-
- regs = of_iomap(dn, 0);
- if (!regs) {
- pr_err("wsp_ics: of_iomap(%s) failed\n", dn->full_name);
- return -ENXIO;
- }
-
- ics->hwirq_start = of_read_number(p, 1);
- ics->count = of_read_number(p + 1, 1);
- ics->regs = regs;
-
- ics->chip_id = wsp_get_chip_id(dn);
- if (WARN_ON(ics->chip_id < 0))
- ics->chip_id = 0;
-
- /* Get some informations about the critter */
- caps = in_be64(ICS_INT_CAPS_REG(ics->regs));
- buid = in_be64(INT_SRC_LAYER_BUID_REG(ics->regs));
- ics->lsi_count = caps >> 56;
- msi_count = (caps >> 44) & 0x7ff;
-
- /* Note: LSI BUID is 9 bits, but really only 3 are BUID and the
- * rest is mixed in the interrupt number. We store the whole
- * thing though
- */
- lsi_buid = (buid >> 48) & 0x1ff;
- ics->lsi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | lsi_buid << 5;
- msi_buid = (buid >> 37) & 0x7;
- msi_base = (ics->chip_id << WSP_ICS_CHIP_SHIFT) | msi_buid << 11;
-
- pr_info("wsp_ics: Found %s\n", dn->full_name);
- pr_info("wsp_ics: irq range : 0x%06llx..0x%06llx\n",
- ics->hwirq_start, ics->hwirq_start + ics->count - 1);
- pr_info("wsp_ics: %4d LSIs : 0x%06x..0x%06x\n",
- ics->lsi_count, ics->lsi_base,
- ics->lsi_base + ics->lsi_count - 1);
- pr_info("wsp_ics: %4d MSIs : 0x%06x..0x%06x\n",
- msi_count, msi_base,
- msi_base + msi_count - 1);
-
- /* Let's check the HW config is sane */
- if (ics->lsi_base < ics->hwirq_start ||
- (ics->lsi_base + ics->lsi_count) > (ics->hwirq_start + ics->count))
- pr_warning("wsp_ics: WARNING ! LSIs out of interrupt-ranges !\n");
- if (msi_base < ics->hwirq_start ||
- (msi_base + msi_count) > (ics->hwirq_start + ics->count))
- pr_warning("wsp_ics: WARNING ! MSIs out of interrupt-ranges !\n");
-
- /* We don't check for overlap between LSI and MSI, which will happen
- * if we use the same BUID, I'm not sure yet how legit that is.
- */
-
- rc = wsp_ics_bitmap_setup(ics, dn);
- if (rc) {
- iounmap(regs);
- return rc;
- }
-
- ics->dn = of_node_get(dn);
- alloc_irq_map(ics);
-
- for(i = 0; i < ics->count; i++)
- wsp_mask_real_irq(ics->hwirq_start + i, ics);
-
- ics->ics.map = wsp_ics_map;
- ics->ics.mask_unknown = wsp_ics_mask_unknown;
- ics->ics.get_server = wsp_ics_get_server;
- ics->ics.host_match = wsp_ics_host_match;
-
- xics_register_ics(&ics->ics);
-
- return 0;
-}
-
-static void __init wsp_ics_set_default_server(void)
-{
- struct device_node *np;
- u32 hwid;
-
- /* Find the server number for the boot cpu. */
- np = of_get_cpu_node(boot_cpuid, NULL);
- BUG_ON(!np);
-
- hwid = get_hard_smp_processor_id(boot_cpuid);
-
- pr_info("wsp_ics: default server is %#x, CPU %s\n", hwid, np->full_name);
- xics_default_server = hwid;
-
- of_node_put(np);
-}
-
-static int __init wsp_ics_init(void)
-{
- struct device_node *dn;
- struct wsp_ics *ics;
- int rc, found;
-
- wsp_ics_set_default_server();
-
- found = 0;
- for_each_compatible_node(dn, NULL, "ibm,ppc-xics")
- found++;
-
- if (found == 0) {
- pr_err("wsp_ics: No ICS's found!\n");
- return -ENODEV;
- }
-
- ics_list = kmalloc(sizeof(*ics) * found, GFP_KERNEL);
- if (!ics_list) {
- pr_err("wsp_ics: No memory for structs.\n");
- return -ENOMEM;
- }
-
- num_ics = 0;
- ics = ics_list;
- for_each_compatible_node(dn, NULL, "ibm,wsp-xics") {
- rc = wsp_ics_setup(ics, dn);
- if (rc == 0) {
- ics++;
- num_ics++;
- }
- }
-
- if (found != num_ics) {
- pr_err("wsp_ics: Failed setting up %d ICS's\n",
- found - num_ics);
- return -1;
- }
-
- return 0;
-}
-
-void __init wsp_init_irq(void)
-{
- wsp_ics_init();
- xics_init();
-
- /* We need to patch our irq chip's EOI to point to the right ICP */
- wsp_irq_chip.irq_eoi = icp_ops->eoi;
-}
-
-#ifdef CONFIG_PCI_MSI
-static void wsp_ics_msi_unmask_irq(struct irq_data *d)
-{
- wsp_chip_unmask_irq(d);
- unmask_msi_irq(d);
-}
-
-static unsigned int wsp_ics_msi_startup(struct irq_data *d)
-{
- wsp_ics_msi_unmask_irq(d);
- return 0;
-}
-
-static void wsp_ics_msi_mask_irq(struct irq_data *d)
-{
- mask_msi_irq(d);
- wsp_chip_mask_irq(d);
-}
-
-/*
- * we do it this way because we reassinge default EOI handling in
- * irq_init() above
- */
-static void wsp_ics_eoi(struct irq_data *data)
-{
- wsp_irq_chip.irq_eoi(data);
-}
-
-static struct irq_chip wsp_ics_msi = {
- .name = "WSP ICS MSI",
- .irq_startup = wsp_ics_msi_startup,
- .irq_mask = wsp_ics_msi_mask_irq,
- .irq_unmask = wsp_ics_msi_unmask_irq,
- .irq_eoi = wsp_ics_eoi,
- .irq_set_affinity = wsp_chip_set_affinity
-};
-
-void wsp_ics_set_msi_chip(unsigned int irq)
-{
- irq_set_chip(irq, &wsp_ics_msi);
-}
-
-void wsp_ics_set_std_chip(unsigned int irq)
-{
- irq_set_chip(irq, &wsp_irq_chip);
-}
-#endif /* CONFIG_PCI_MSI */
diff --git a/arch/powerpc/platforms/wsp/ics.h b/arch/powerpc/platforms/wsp/ics.h
deleted file mode 100644
index 07b644e..0000000
--- a/arch/powerpc/platforms/wsp/ics.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2009 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ICS_H
-#define __ICS_H
-
-#define XIVE_ADDR_MASK 0x7FFULL
-
-extern void wsp_init_irq(void);
-
-extern int wsp_ics_alloc_irq(struct device_node *dn, int num);
-extern void wsp_ics_free_irq(struct device_node *dn, unsigned int irq);
-
-#ifdef CONFIG_PCI_MSI
-extern void wsp_ics_set_msi_chip(unsigned int irq);
-extern void wsp_ics_set_std_chip(unsigned int irq);
-#endif /* CONFIG_PCI_MSI */
-
-#endif /* __ICS_H */
diff --git a/arch/powerpc/platforms/wsp/msi.c b/arch/powerpc/platforms/wsp/msi.c
deleted file mode 100644
index 380882f..0000000
--- a/arch/powerpc/platforms/wsp/msi.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include "msi.h"
-#include "ics.h"
-#include "wsp_pci.h"
-
-/* Magic addresses for 32 & 64-bit MSIs with hardcoded MVE 0 */
-#define MSI_ADDR_32 0xFFFF0000ul
-#define MSI_ADDR_64 0x1000000000000000ul
-
-int wsp_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
- struct pci_controller *phb;
- struct msi_desc *entry;
- struct msi_msg msg;
- unsigned int virq;
- int hwirq;
-
- phb = pci_bus_to_host(dev->bus);
- if (!phb)
- return -ENOENT;
-
- entry = list_first_entry(&dev->msi_list, struct msi_desc, list);
- if (entry->msi_attrib.is_64) {
- msg.address_lo = 0;
- msg.address_hi = MSI_ADDR_64 >> 32;
- } else {
- msg.address_lo = MSI_ADDR_32;
- msg.address_hi = 0;
- }
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- hwirq = wsp_ics_alloc_irq(phb->dn, 1);
- if (hwirq < 0) {
- dev_warn(&dev->dev, "wsp_msi: hwirq alloc failed!\n");
- return hwirq;
- }
-
- virq = irq_create_mapping(NULL, hwirq);
- if (virq == NO_IRQ) {
- dev_warn(&dev->dev, "wsp_msi: virq alloc failed!\n");
- return -1;
- }
-
- dev_dbg(&dev->dev, "wsp_msi: allocated irq %#x/%#x\n",
- hwirq, virq);
-
- wsp_ics_set_msi_chip(virq);
- irq_set_msi_desc(virq, entry);
- msg.data = hwirq & XIVE_ADDR_MASK;
- write_msi_msg(virq, &msg);
- }
-
- return 0;
-}
-
-void wsp_teardown_msi_irqs(struct pci_dev *dev)
-{
- struct pci_controller *phb;
- struct msi_desc *entry;
- int hwirq;
-
- phb = pci_bus_to_host(dev->bus);
-
- dev_dbg(&dev->dev, "wsp_msi: tearing down msi irqs\n");
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- if (entry->irq == NO_IRQ)
- continue;
-
- irq_set_msi_desc(entry->irq, NULL);
- wsp_ics_set_std_chip(entry->irq);
-
- hwirq = virq_to_hw(entry->irq);
- /* In this order to avoid racing with irq_create_mapping() */
- irq_dispose_mapping(entry->irq);
- wsp_ics_free_irq(phb->dn, hwirq);
- }
-}
-
-void wsp_setup_phb_msi(struct pci_controller *phb)
-{
- /* Create a single MVE at offset 0 that matches everything */
- out_be64(phb->cfg_data + PCIE_REG_IODA_ADDR, PCIE_REG_IODA_AD_TBL_MVT);
- out_be64(phb->cfg_data + PCIE_REG_IODA_DATA0, 1ull << 63);
-
- ppc_md.setup_msi_irqs = wsp_setup_msi_irqs;
- ppc_md.teardown_msi_irqs = wsp_teardown_msi_irqs;
-}
diff --git a/arch/powerpc/platforms/wsp/msi.h b/arch/powerpc/platforms/wsp/msi.h
deleted file mode 100644
index 0ab27b7..0000000
--- a/arch/powerpc/platforms/wsp/msi.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2011 Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __WSP_MSI_H
-#define __WSP_MSI_H
-
-#ifdef CONFIG_PCI_MSI
-extern void wsp_setup_phb_msi(struct pci_controller *phb);
-#else
-static inline void wsp_setup_phb_msi(struct pci_controller *phb) { }
-#endif
-
-#endif /* __WSP_MSI_H */
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
deleted file mode 100644
index 3f67298..0000000
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * IBM Onboard Peripheral Bus Interrupt Controller
- *
- * Copyright 2010 Jack Miller, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/reg_a2.h>
-#include <asm/irq.h>
-
-#define OPB_NR_IRQS 32
-
-#define OPB_MLSASIER 0x04 /* MLS Accumulated Status IER */
-#define OPB_MLSIR 0x50 /* MLS Interrupt Register */
-#define OPB_MLSIER 0x54 /* MLS Interrupt Enable Register */
-#define OPB_MLSIPR 0x58 /* MLS Interrupt Polarity Register */
-#define OPB_MLSIIR 0x5c /* MLS Interrupt Inputs Register */
-
-static int opb_index = 0;
-
-struct opb_pic {
- struct irq_domain *host;
- void *regs;
- int index;
- spinlock_t lock;
-};
-
-static u32 opb_in(struct opb_pic *opb, int offset)
-{
- return in_be32(opb->regs + offset);
-}
-
-static void opb_out(struct opb_pic *opb, int offset, u32 val)
-{
- out_be32(opb->regs + offset, val);
-}
-
-static void opb_unmask_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 ier, bitset;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier | bitset);
- ier = opb_in(opb, OPB_MLSIER);
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 ier, mask;
-
- opb = d->chip_data;
- mask = ~(1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier & mask);
- ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_ack_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 bitset;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- opb_out(opb, OPB_MLSIR, bitset);
- opb_in(opb, OPB_MLSIR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static void opb_mask_ack_irq(struct irq_data *d)
-{
- struct opb_pic *opb;
- unsigned long flags;
- u32 bitset;
- u32 ier, ir;
-
- opb = d->chip_data;
- bitset = (1 << (31 - irqd_to_hwirq(d)));
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ier = opb_in(opb, OPB_MLSIER);
- opb_out(opb, OPB_MLSIER, ier & ~bitset);
- ier = opb_in(opb, OPB_MLSIER); // Flush posted writes
-
- opb_out(opb, OPB_MLSIR, bitset);
- ir = opb_in(opb, OPB_MLSIR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-}
-
-static int opb_set_irq_type(struct irq_data *d, unsigned int flow)
-{
- struct opb_pic *opb;
- unsigned long flags;
- int invert, ipr, mask, bit;
-
- opb = d->chip_data;
-
- /* The only information we're interested in in the type is whether it's
- * a high or low trigger. For high triggered interrupts, the polarity
- * set for it in the MLS Interrupt Polarity Register is 0, for low
- * interrupts it's 1 so that the proper input in the MLS Interrupt Input
- * Register is interrupted as asserting the interrupt. */
-
- switch (flow) {
- case IRQ_TYPE_NONE:
- opb_mask_irq(d);
- return 0;
-
- case IRQ_TYPE_LEVEL_HIGH:
- invert = 0;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- invert = 1;
- break;
-
- default:
- return -EINVAL;
- }
-
- bit = (1 << (31 - irqd_to_hwirq(d)));
- mask = ~bit;
-
- spin_lock_irqsave(&opb->lock, flags);
-
- ipr = opb_in(opb, OPB_MLSIPR);
- ipr = (ipr & mask) | (invert ? bit : 0);
- opb_out(opb, OPB_MLSIPR, ipr);
- ipr = opb_in(opb, OPB_MLSIPR); // Flush posted writes
-
- spin_unlock_irqrestore(&opb->lock, flags);
-
- /* Record the type in the interrupt descriptor */
- irqd_set_trigger_type(d, flow);
-
- return 0;
-}
-
-static struct irq_chip opb_irq_chip = {
- .name = "OPB",
- .irq_mask = opb_mask_irq,
- .irq_unmask = opb_unmask_irq,
- .irq_mask_ack = opb_mask_ack_irq,
- .irq_ack = opb_ack_irq,
- .irq_set_type = opb_set_irq_type
-};
-
-static int opb_host_map(struct irq_domain *host, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- struct opb_pic *opb;
-
- opb = host->host_data;
-
- /* Most of the important stuff is handled by the generic host code, like
- * the lookup, so just attach some info to the virtual irq */
-
- irq_set_chip_data(virq, opb);
- irq_set_chip_and_handler(virq, &opb_irq_chip, handle_level_irq);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops opb_host_ops = {
- .map = opb_host_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-irqreturn_t opb_irq_handler(int irq, void *private)
-{
- struct opb_pic *opb;
- u32 ir, src, subvirq;
-
- opb = (struct opb_pic *) private;
-
- /* Read the OPB MLS Interrupt Register for
- * asserted interrupts */
- ir = opb_in(opb, OPB_MLSIR);
- if (!ir)
- return IRQ_NONE;
-
- do {
- /* Get 1 - 32 source, *NOT* bit */
- src = 32 - ffs(ir);
-
- /* Translate from the OPB's conception of interrupt number to
- * Linux's virtual IRQ */
-
- subvirq = irq_linear_revmap(opb->host, src);
-
- generic_handle_irq(subvirq);
- } while ((ir = opb_in(opb, OPB_MLSIR)));
-
- return IRQ_HANDLED;
-}
-
-struct opb_pic *opb_pic_init_one(struct device_node *dn)
-{
- struct opb_pic *opb;
- struct resource res;
-
- if (of_address_to_resource(dn, 0, &res)) {
- printk(KERN_ERR "opb: Couldn't translate resource\n");
- return NULL;
- }
-
- opb = kzalloc(sizeof(struct opb_pic), GFP_KERNEL);
- if (!opb) {
- printk(KERN_ERR "opb: Failed to allocate opb struct!\n");
- return NULL;
- }
-
- /* Get access to the OPB MMIO registers */
- opb->regs = ioremap(res.start + 0x10000, 0x1000);
- if (!opb->regs) {
- printk(KERN_ERR "opb: Failed to allocate register space!\n");
- goto free_opb;
- }
-
- /* Allocate an irq domain so that Linux knows that despite only
- * having one interrupt to issue, we're the controller for multiple
- * hardware IRQs, so later we can lookup their virtual IRQs. */
-
- opb->host = irq_domain_add_linear(dn, OPB_NR_IRQS, &opb_host_ops, opb);
- if (!opb->host) {
- printk(KERN_ERR "opb: Failed to allocate IRQ host!\n");
- goto free_regs;
- }
-
- opb->index = opb_index++;
- spin_lock_init(&opb->lock);
-
- /* Disable all interrupts by default */
- opb_out(opb, OPB_MLSASIER, 0);
- opb_out(opb, OPB_MLSIER, 0);
-
- /* ACK any interrupts left by FW */
- opb_out(opb, OPB_MLSIR, 0xFFFFFFFF);
-
- return opb;
-
-free_regs:
- iounmap(opb->regs);
-free_opb:
- kfree(opb);
- return NULL;
-}
-
-void __init opb_pic_init(void)
-{
- struct device_node *dn;
- struct opb_pic *opb;
- int virq;
- int rc;
-
- /* Call init_one for each OPB device */
- for_each_compatible_node(dn, NULL, "ibm,opb") {
-
- /* Fill in an OPB struct */
- opb = opb_pic_init_one(dn);
- if (!opb) {
- printk(KERN_WARNING "opb: Failed to init node, skipped!\n");
- continue;
- }
-
- /* Map / get opb's hardware virtual irq */
- virq = irq_of_parse_and_map(dn, 0);
- if (virq <= 0) {
- printk("opb: irq_op_parse_and_map failed!\n");
- continue;
- }
-
- /* Attach opb interrupt handler to new virtual IRQ */
- rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
- "OPB LS Cascade", opb);
- if (rc) {
- printk("opb: request_irq failed: %d\n", rc);
- continue;
- }
-
- printk("OPB%d init with %d IRQs at %p\n", opb->index,
- OPB_NR_IRQS, opb->regs);
- }
-}
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
deleted file mode 100644
index a87b414..0000000
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/of_fdt.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-
-static void psr2_spin(void)
-{
- hard_irq_disable();
- for (;;)
- continue;
-}
-
-static void psr2_restart(char *cmd)
-{
- psr2_spin();
-}
-
-static int __init psr2_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
- /* chroma systems also claim they are psr2s */
- return 0;
- }
-
- if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
- return 0;
-
- return 1;
-}
-
-define_machine(psr2_md) {
- .name = "PSR2 A2",
- .probe = psr2_probe,
- .setup_arch = wsp_setup_arch,
- .restart = psr2_restart,
- .power_off = psr2_spin,
- .halt = psr2_spin,
- .calibrate_decr = generic_calibrate_decr,
- .init_IRQ = wsp_setup_irq,
- .progress = udbg_progress,
- .power_save = book3e_idle,
-};
-
-machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
deleted file mode 100644
index 268bc89..0000000
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * SCOM support for A2 platforms
- *
- * Copyright 2007-2011 Benjamin Herrenschmidt, David Gibson,
- * Michael Ellerman, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-#define SCOM_RAMC 0x2a /* Ram Command */
-#define SCOM_RAMC_TGT1_EXT 0x80000000
-#define SCOM_RAMC_SRC1_EXT 0x40000000
-#define SCOM_RAMC_SRC2_EXT 0x20000000
-#define SCOM_RAMC_SRC3_EXT 0x10000000
-#define SCOM_RAMC_ENABLE 0x00080000
-#define SCOM_RAMC_THREADSEL 0x00060000
-#define SCOM_RAMC_EXECUTE 0x00010000
-#define SCOM_RAMC_MSR_OVERRIDE 0x00008000
-#define SCOM_RAMC_MSR_PR 0x00004000
-#define SCOM_RAMC_MSR_GS 0x00002000
-#define SCOM_RAMC_FORCE 0x00001000
-#define SCOM_RAMC_FLUSH 0x00000800
-#define SCOM_RAMC_INTERRUPT 0x00000004
-#define SCOM_RAMC_ERROR 0x00000002
-#define SCOM_RAMC_DONE 0x00000001
-#define SCOM_RAMI 0x29 /* Ram Instruction */
-#define SCOM_RAMIC 0x28 /* Ram Instruction and Command */
-#define SCOM_RAMIC_INSN 0xffffffff00000000
-#define SCOM_RAMD 0x2d /* Ram Data */
-#define SCOM_RAMDH 0x2e /* Ram Data High */
-#define SCOM_RAMDL 0x2f /* Ram Data Low */
-#define SCOM_PCCR0 0x33 /* PC Configuration Register 0 */
-#define SCOM_PCCR0_ENABLE_DEBUG 0x80000000
-#define SCOM_PCCR0_ENABLE_RAM 0x40000000
-#define SCOM_THRCTL 0x30 /* Thread Control and Status */
-#define SCOM_THRCTL_T0_STOP 0x80000000
-#define SCOM_THRCTL_T1_STOP 0x40000000
-#define SCOM_THRCTL_T2_STOP 0x20000000
-#define SCOM_THRCTL_T3_STOP 0x10000000
-#define SCOM_THRCTL_T0_STEP 0x08000000
-#define SCOM_THRCTL_T1_STEP 0x04000000
-#define SCOM_THRCTL_T2_STEP 0x02000000
-#define SCOM_THRCTL_T3_STEP 0x01000000
-#define SCOM_THRCTL_T0_RUN 0x00800000
-#define SCOM_THRCTL_T1_RUN 0x00400000
-#define SCOM_THRCTL_T2_RUN 0x00200000
-#define SCOM_THRCTL_T3_RUN 0x00100000
-#define SCOM_THRCTL_T0_PM 0x00080000
-#define SCOM_THRCTL_T1_PM 0x00040000
-#define SCOM_THRCTL_T2_PM 0x00020000
-#define SCOM_THRCTL_T3_PM 0x00010000
-#define SCOM_THRCTL_T0_UDE 0x00008000
-#define SCOM_THRCTL_T1_UDE 0x00004000
-#define SCOM_THRCTL_T2_UDE 0x00002000
-#define SCOM_THRCTL_T3_UDE 0x00001000
-#define SCOM_THRCTL_ASYNC_DIS 0x00000800
-#define SCOM_THRCTL_TB_DIS 0x00000400
-#define SCOM_THRCTL_DEC_DIS 0x00000200
-#define SCOM_THRCTL_AND 0x31 /* Thread Control and Status */
-#define SCOM_THRCTL_OR 0x32 /* Thread Control and Status */
-
-
-static DEFINE_PER_CPU(scom_map_t, scom_ptrs);
-
-static scom_map_t get_scom(int cpu, struct device_node *np, int *first_thread)
-{
- scom_map_t scom = per_cpu(scom_ptrs, cpu);
- int tcpu;
-
- if (scom_map_ok(scom)) {
- *first_thread = 0;
- return scom;
- }
-
- *first_thread = 1;
-
- scom = scom_map_device(np, 0);
-
- for (tcpu = cpu_first_thread_sibling(cpu);
- tcpu <= cpu_last_thread_sibling(cpu); tcpu++)
- per_cpu(scom_ptrs, tcpu) = scom;
-
- /* Hack: for the boot core, this will actually get called on
- * the second thread up, not the first so our test above will
- * set first_thread incorrectly. */
- if (cpu_first_thread_sibling(cpu) == 0)
- *first_thread = 0;
-
- return scom;
-}
-
-static int a2_scom_ram(scom_map_t scom, int thread, u32 insn, int extmask)
-{
- u64 cmd, mask, val;
- int n = 0;
-
- cmd = ((u64)insn << 32) | (((u64)extmask & 0xf) << 28)
- | ((u64)thread << 17) | SCOM_RAMC_ENABLE | SCOM_RAMC_EXECUTE;
- mask = SCOM_RAMC_DONE | SCOM_RAMC_INTERRUPT | SCOM_RAMC_ERROR;
-
- scom_write(scom, SCOM_RAMIC, cmd);
-
- for (;;) {
- if (scom_read(scom, SCOM_RAMC, &val) != 0) {
- pr_err("SCOM error on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -1;
- }
- if (val & mask)
- break;
- pr_devel("Waiting on RAMC = 0x%llx\n", val);
- if (++n == 3) {
- pr_err("RAMC timeout on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -1;
- }
- }
-
- if (val & SCOM_RAMC_INTERRUPT) {
- pr_err("RAMC interrupt on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -SCOM_RAMC_INTERRUPT;
- }
-
- if (val & SCOM_RAMC_ERROR) {
- pr_err("RAMC error on instruction 0x%08x, thread %d\n",
- insn, thread);
- return -SCOM_RAMC_ERROR;
- }
-
- return 0;
-}
-
-static int a2_scom_getgpr(scom_map_t scom, int thread, int gpr, int alt,
- u64 *out_gpr)
-{
- int rc;
-
- /* or rN, rN, rN */
- u32 insn = 0x7c000378 | (gpr << 21) | (gpr << 16) | (gpr << 11);
- rc = a2_scom_ram(scom, thread, insn, alt ? 0xf : 0x0);
- if (rc)
- return rc;
-
- return scom_read(scom, SCOM_RAMD, out_gpr);
-}
-
-static int a2_scom_getspr(scom_map_t scom, int thread, int spr, u64 *out_spr)
-{
- int rc, sprhi, sprlo;
- u32 insn;
-
- sprhi = spr >> 5;
- sprlo = spr & 0x1f;
- insn = 0x7c2002a6 | (sprlo << 16) | (sprhi << 11); /* mfspr r1,spr */
-
- if (spr == 0x0ff0)
- insn = 0x7c2000a6; /* mfmsr r1 */
-
- rc = a2_scom_ram(scom, thread, insn, 0xf);
- if (rc)
- return rc;
- return a2_scom_getgpr(scom, thread, 1, 1, out_spr);
-}
-
-static int a2_scom_setgpr(scom_map_t scom, int thread, int gpr,
- int alt, u64 val)
-{
- u32 lis = 0x3c000000 | (gpr << 21);
- u32 li = 0x38000000 | (gpr << 21);
- u32 oris = 0x64000000 | (gpr << 21) | (gpr << 16);
- u32 ori = 0x60000000 | (gpr << 21) | (gpr << 16);
- u32 rldicr32 = 0x780007c6 | (gpr << 21) | (gpr << 16);
- u32 highest = val >> 48;
- u32 higher = (val >> 32) & 0xffff;
- u32 high = (val >> 16) & 0xffff;
- u32 low = val & 0xffff;
- int lext = alt ? 0x8 : 0x0;
- int oext = alt ? 0xf : 0x0;
- int rc = 0;
-
- if (highest)
- rc |= a2_scom_ram(scom, thread, lis | highest, lext);
-
- if (higher) {
- if (highest)
- rc |= a2_scom_ram(scom, thread, oris | higher, oext);
- else
- rc |= a2_scom_ram(scom, thread, li | higher, lext);
- }
-
- if (highest || higher)
- rc |= a2_scom_ram(scom, thread, rldicr32, oext);
-
- if (high) {
- if (highest || higher)
- rc |= a2_scom_ram(scom, thread, oris | high, oext);
- else
- rc |= a2_scom_ram(scom, thread, lis | high, lext);
- }
-
- if (highest || higher || high)
- rc |= a2_scom_ram(scom, thread, ori | low, oext);
- else
- rc |= a2_scom_ram(scom, thread, li | low, lext);
-
- return rc;
-}
-
-static int a2_scom_setspr(scom_map_t scom, int thread, int spr, u64 val)
-{
- int sprhi = spr >> 5;
- int sprlo = spr & 0x1f;
- /* mtspr spr, r1 */
- u32 insn = 0x7c2003a6 | (sprlo << 16) | (sprhi << 11);
-
- if (spr == 0x0ff0)
- insn = 0x7c200124; /* mtmsr r1 */
-
- if (a2_scom_setgpr(scom, thread, 1, 1, val))
- return -1;
-
- return a2_scom_ram(scom, thread, insn, 0xf);
-}
-
-static int a2_scom_initial_tlb(scom_map_t scom, int thread)
-{
- extern u32 a2_tlbinit_code_start[], a2_tlbinit_code_end[];
- extern u32 a2_tlbinit_after_iprot_flush[];
- extern u32 a2_tlbinit_after_linear_map[];
- u32 assoc, entries, i;
- u64 epn, tlbcfg;
- u32 *p;
- int rc;
-
- /* Invalidate all entries (including iprot) */
-
- rc = a2_scom_getspr(scom, thread, SPRN_TLB0CFG, &tlbcfg);
- if (rc)
- goto scom_fail;
- entries = tlbcfg & TLBnCFG_N_ENTRY;
- assoc = (tlbcfg & TLBnCFG_ASSOC) >> 24;
- epn = 0;
-
- /* Set MMUCR2 to enable 4K, 64K, 1M, 16M and 1G pages */
- a2_scom_setspr(scom, thread, SPRN_MMUCR2, 0x000a7531);
- /* Set MMUCR3 to write all thids bit to the TLB */
- a2_scom_setspr(scom, thread, SPRN_MMUCR3, 0x0000000f);
-
- /* Set MAS1 for 1G page size, and MAS2 to our initial EPN */
- a2_scom_setspr(scom, thread, SPRN_MAS1, MAS1_TSIZE(BOOK3E_PAGESZ_1GB));
- a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
- for (i = 0; i < entries; i++) {
-
- a2_scom_setspr(scom, thread, SPRN_MAS0, MAS0_ESEL(i % assoc));
-
- /* tlbwe */
- rc = a2_scom_ram(scom, thread, 0x7c0007a4, 0);
- if (rc)
- goto scom_fail;
-
- /* Next entry is new address? */
- if((i + 1) % assoc == 0) {
- epn += (1 << 30);
- a2_scom_setspr(scom, thread, SPRN_MAS2, epn);
- }
- }
-
- /* Setup args for linear mapping */
- rc = a2_scom_setgpr(scom, thread, 3, 0, MAS0_TLBSEL(0));
- if (rc)
- goto scom_fail;
-
- /* Linear mapping */
- for (p = a2_tlbinit_code_start; p < a2_tlbinit_after_linear_map; p++) {
- rc = a2_scom_ram(scom, thread, *p, 0);
- if (rc)
- goto scom_fail;
- }
-
- /*
- * For the boot thread, between the linear mapping and the debug
- * mappings there is a loop to flush iprot mappings. Ramming doesn't do
- * branches, but the secondary threads don't need to be nearly as smart
- * (i.e. we don't need to worry about invalidating the mapping we're
- * standing on).
- */
-
- /* Debug mappings. Expects r11 = MAS0 from linear map (set above) */
- for (p = a2_tlbinit_after_iprot_flush; p < a2_tlbinit_code_end; p++) {
- rc = a2_scom_ram(scom, thread, *p, 0);
- if (rc)
- goto scom_fail;
- }
-
-scom_fail:
- if (rc)
- pr_err("Setting up initial TLB failed, err %d\n", rc);
-
- if (rc == -SCOM_RAMC_INTERRUPT) {
- /* Interrupt, dump some status */
- int rc[10];
- u64 iar, srr0, srr1, esr, mas0, mas1, mas2, mas7_3, mas8, ccr2;
- rc[0] = a2_scom_getspr(scom, thread, SPRN_IAR, &iar);
- rc[1] = a2_scom_getspr(scom, thread, SPRN_SRR0, &srr0);
- rc[2] = a2_scom_getspr(scom, thread, SPRN_SRR1, &srr1);
- rc[3] = a2_scom_getspr(scom, thread, SPRN_ESR, &esr);
- rc[4] = a2_scom_getspr(scom, thread, SPRN_MAS0, &mas0);
- rc[5] = a2_scom_getspr(scom, thread, SPRN_MAS1, &mas1);
- rc[6] = a2_scom_getspr(scom, thread, SPRN_MAS2, &mas2);
- rc[7] = a2_scom_getspr(scom, thread, SPRN_MAS7_MAS3, &mas7_3);
- rc[8] = a2_scom_getspr(scom, thread, SPRN_MAS8, &mas8);
- rc[9] = a2_scom_getspr(scom, thread, SPRN_A2_CCR2, &ccr2);
- pr_err(" -> retreived IAR =0x%llx (err %d)\n", iar, rc[0]);
- pr_err(" retreived SRR0=0x%llx (err %d)\n", srr0, rc[1]);
- pr_err(" retreived SRR1=0x%llx (err %d)\n", srr1, rc[2]);
- pr_err(" retreived ESR =0x%llx (err %d)\n", esr, rc[3]);
- pr_err(" retreived MAS0=0x%llx (err %d)\n", mas0, rc[4]);
- pr_err(" retreived MAS1=0x%llx (err %d)\n", mas1, rc[5]);
- pr_err(" retreived MAS2=0x%llx (err %d)\n", mas2, rc[6]);
- pr_err(" retreived MS73=0x%llx (err %d)\n", mas7_3, rc[7]);
- pr_err(" retreived MAS8=0x%llx (err %d)\n", mas8, rc[8]);
- pr_err(" retreived CCR2=0x%llx (err %d)\n", ccr2, rc[9]);
- }
-
- return rc;
-}
-
-int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
-{
- u64 init_iar, init_msr, init_ccr2;
- unsigned long start_here;
- int rc, core_setup;
- scom_map_t scom;
- u64 pccr0;
-
- scom = get_scom(lcpu, np, &core_setup);
- if (!scom) {
- printk(KERN_ERR "Couldn't map SCOM for CPU%d\n", lcpu);
- return -1;
- }
-
- pr_devel("Bringing up CPU%d using SCOM...\n", lcpu);
-
- if (scom_read(scom, SCOM_PCCR0, &pccr0) != 0) {
- printk(KERN_ERR "XSCOM failure readng PCCR0 on CPU%d\n", lcpu);
- return -1;
- }
- scom_write(scom, SCOM_PCCR0, pccr0 | SCOM_PCCR0_ENABLE_DEBUG |
- SCOM_PCCR0_ENABLE_RAM);
-
- /* Stop the thead with THRCTL. If we are setting up the TLB we stop all
- * threads. We also disable asynchronous interrupts while RAMing.
- */
- if (core_setup)
- scom_write(scom, SCOM_THRCTL_OR,
- SCOM_THRCTL_T0_STOP |
- SCOM_THRCTL_T1_STOP |
- SCOM_THRCTL_T2_STOP |
- SCOM_THRCTL_T3_STOP |
- SCOM_THRCTL_ASYNC_DIS);
- else
- scom_write(scom, SCOM_THRCTL_OR, SCOM_THRCTL_T0_STOP >> thr_idx);
-
- /* Flush its pipeline just in case */
- scom_write(scom, SCOM_RAMC, ((u64)thr_idx << 17) |
- SCOM_RAMC_FLUSH | SCOM_RAMC_ENABLE);
-
- a2_scom_getspr(scom, thr_idx, SPRN_IAR, &init_iar);
- a2_scom_getspr(scom, thr_idx, 0x0ff0, &init_msr);
- a2_scom_getspr(scom, thr_idx, SPRN_A2_CCR2, &init_ccr2);
-
- /* Set MSR to MSR_CM (0x0ff0 is magic value for MSR_CM) */
- rc = a2_scom_setspr(scom, thr_idx, 0x0ff0, MSR_CM);
- if (rc) {
- pr_err("Failed to set MSR ! err %d\n", rc);
- return rc;
- }
-
- /* RAM in an sync/isync for the sake of it */
- a2_scom_ram(scom, thr_idx, 0x7c0004ac, 0);
- a2_scom_ram(scom, thr_idx, 0x4c00012c, 0);
-
- if (core_setup) {
- pr_devel("CPU%d is first thread in core, initializing TLB...\n",
- lcpu);
- rc = a2_scom_initial_tlb(scom, thr_idx);
- if (rc)
- goto fail;
- }
-
- start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
- : generic_secondary_thread_init);
- pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
-
- rc |= a2_scom_setspr(scom, thr_idx, SPRN_IAR, start_here);
- rc |= a2_scom_setgpr(scom, thr_idx, 3, 0,
- get_hard_smp_processor_id(lcpu));
- /*
- * Tell book3e_secondary_core_init not to set up the TLB, we've
- * already done that.
- */
- rc |= a2_scom_setgpr(scom, thr_idx, 4, 0, 1);
-
- rc |= a2_scom_setspr(scom, thr_idx, SPRN_TENS, 0x1 << thr_idx);
-
- scom_write(scom, SCOM_RAMC, 0);
- scom_write(scom, SCOM_THRCTL_AND, ~(SCOM_THRCTL_T0_STOP >> thr_idx));
- scom_write(scom, SCOM_PCCR0, pccr0);
-fail:
- pr_devel(" SCOM initialization %s\n", rc ? "failed" : "succeeded");
- if (rc) {
- pr_err("Old IAR=0x%08llx MSR=0x%08llx CCR2=0x%08llx\n",
- init_iar, init_msr, init_ccr2);
- }
-
- return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/scom_wsp.c b/arch/powerpc/platforms/wsp/scom_wsp.c
deleted file mode 100644
index 6538b4d..0000000
--- a/arch/powerpc/platforms/wsp/scom_wsp.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * SCOM backend for WSP
- *
- * Copyright 2010 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/of_address.h>
-
-#include <asm/cputhreads.h>
-#include <asm/reg_a2.h>
-#include <asm/scom.h>
-#include <asm/udbg.h>
-
-#include "wsp.h"
-
-
-static scom_map_t wsp_scom_map(struct device_node *dev, u64 reg, u64 count)
-{
- struct resource r;
- u64 xscom_addr;
-
- if (!of_get_property(dev, "scom-controller", NULL)) {
- pr_err("%s: device %s is not a SCOM controller\n",
- __func__, dev->full_name);
- return SCOM_MAP_INVALID;
- }
-
- if (of_address_to_resource(dev, 0, &r)) {
- pr_debug("Failed to find SCOM controller address\n");
- return 0;
- }
-
- /* Transform the SCOM address into an XSCOM offset */
- xscom_addr = ((reg & 0x7f000000) >> 1) | ((reg & 0xfffff) << 3);
-
- return (scom_map_t)ioremap(r.start + xscom_addr, count << 3);
-}
-
-static void wsp_scom_unmap(scom_map_t map)
-{
- iounmap((void *)map);
-}
-
-static int wsp_scom_read(scom_map_t map, u64 reg, u64 *value)
-{
- u64 __iomem *addr = (u64 __iomem *)map;
-
- *value = in_be64(addr + reg);
-
- return 0;
-}
-
-static int wsp_scom_write(scom_map_t map, u64 reg, u64 value)
-{
- u64 __iomem *addr = (u64 __iomem *)map;
-
- out_be64(addr + reg, value);
-
- return 0;
-}
-
-static const struct scom_controller wsp_scom_controller = {
- .map = wsp_scom_map,
- .unmap = wsp_scom_unmap,
- .read = wsp_scom_read,
- .write = wsp_scom_write
-};
-
-void scom_init_wsp(void)
-{
- scom_init(&wsp_scom_controller);
-}
diff --git a/arch/powerpc/platforms/wsp/setup.c b/arch/powerpc/platforms/wsp/setup.c
deleted file mode 100644
index 11ac2f0..0000000
--- a/arch/powerpc/platforms/wsp/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2010 Michael Ellerman, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-
-#include "wsp.h"
-
-/*
- * Find chip-id by walking up device tree looking for ibm,wsp-chip-id property.
- * Won't work for nodes that are not a descendant of a wsp node.
- */
-int wsp_get_chip_id(struct device_node *dn)
-{
- const u32 *p;
- int rc;
-
- /* Start looking at the specified node, not its parent */
- dn = of_node_get(dn);
- while (dn && !(p = of_get_property(dn, "ibm,wsp-chip-id", NULL)))
- dn = of_get_next_parent(dn);
-
- if (!dn)
- return -1;
-
- rc = *p;
- of_node_put(dn);
-
- return rc;
-}
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
deleted file mode 100644
index 332a18b..0000000
--- a/arch/powerpc/platforms/wsp/smp.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * SMP Support for A2 platforms
- *
- * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/dbell.h>
-#include <asm/machdep.h>
-#include <asm/xics.h>
-
-#include "ics.h"
-#include "wsp.h"
-
-static void smp_a2_setup_cpu(int cpu)
-{
- doorbell_setup_this_cpu();
-
- if (cpu != boot_cpuid)
- xics_setup_cpu();
-}
-
-int smp_a2_kick_cpu(int nr)
-{
- const char *enable_method;
- struct device_node *np;
- int thr_idx;
-
- if (nr < 0 || nr >= NR_CPUS)
- return -ENOENT;
-
- np = of_get_cpu_node(nr, &thr_idx);
- if (!np)
- return -ENODEV;
-
- enable_method = of_get_property(np, "enable-method", NULL);
- pr_devel("CPU%d has enable-method: \"%s\"\n", nr, enable_method);
-
- if (!enable_method) {
- printk(KERN_ERR "CPU%d has no enable-method\n", nr);
- return -ENOENT;
- } else if (strcmp(enable_method, "ibm,a2-scom") == 0) {
- if (a2_scom_startup_cpu(nr, thr_idx, np))
- return -1;
- } else {
- printk(KERN_ERR "CPU%d: Don't understand enable-method \"%s\"\n",
- nr, enable_method);
- return -EINVAL;
- }
-
- /*
- * The processor is currently spinning, waiting for the
- * cpu_start field to become non-zero After we set cpu_start,
- * the processor will continue on to secondary_start
- */
- paca[nr].cpu_start = 1;
-
- return 0;
-}
-
-static int __init smp_a2_probe(void)
-{
- return num_possible_cpus();
-}
-
-static struct smp_ops_t a2_smp_ops = {
- .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
- .cause_ipi = doorbell_cause_ipi,
- .probe = smp_a2_probe,
- .kick_cpu = smp_a2_kick_cpu,
- .setup_cpu = smp_a2_setup_cpu,
-};
-
-void __init a2_setup_smp(void)
-{
- smp_ops = &a2_smp_ops;
-}
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
deleted file mode 100644
index 58cd1f0..0000000
--- a/arch/powerpc/platforms/wsp/wsp.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2008-2011, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/smp.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/of_address.h>
-
-#include <asm/scom.h>
-
-#include "wsp.h"
-#include "ics.h"
-
-#define WSP_SOC_COMPATIBLE "ibm,wsp-soc"
-#define PBIC_COMPATIBLE "ibm,wsp-pbic"
-#define COPRO_COMPATIBLE "ibm,wsp-coprocessor"
-
-static int __init wsp_probe_buses(void)
-{
- static __initdata struct of_device_id bus_ids[] = {
- /*
- * every node in between needs to be here or you won't
- * find it
- */
- { .compatible = WSP_SOC_COMPATIBLE, },
- { .compatible = PBIC_COMPATIBLE, },
- { .compatible = COPRO_COMPATIBLE, },
- {},
- };
- of_platform_bus_probe(NULL, bus_ids, NULL);
-
- return 0;
-}
-
-void __init wsp_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- scom_init_wsp();
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
- wsp_setup_pci();
-#endif
-}
-
-void __init wsp_setup_irq(void)
-{
- wsp_init_irq();
- opb_pic_init();
-}
-
-
-int __init wsp_probe_devices(void)
-{
- struct device_node *np;
-
- /* Our RTC is a ds1500. It seems to be programatically compatible
- * with the ds1511 for which we have a driver so let's use that
- */
- np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
- if (np != NULL) {
- struct resource res;
- if (of_address_to_resource(np, 0, &res) == 0)
- platform_device_register_simple("ds1511", 0, &res, 1);
- }
-
- wsp_probe_buses();
-
- return 0;
-}
-
-void wsp_halt(void)
-{
- u64 val;
- scom_map_t m;
- struct device_node *dn;
- struct device_node *mine;
- struct device_node *me;
- int rc;
-
- me = of_get_cpu_node(smp_processor_id(), NULL);
- mine = scom_find_parent(me);
-
- /* This will halt all the A2s but not power off the chip */
- for_each_node_with_property(dn, "scom-controller") {
- if (dn == mine)
- continue;
- m = scom_map(dn, 0, 1);
-
- /* read-modify-write it so the HW probe does not get
- * confused */
- rc = scom_read(m, 0, &val);
- if (rc == 0)
- scom_write(m, 0, val | 1);
- scom_unmap(m);
- }
- m = scom_map(mine, 0, 1);
- rc = scom_read(m, 0, &val);
- if (rc == 0)
- scom_write(m, 0, val | 1);
- /* should never return */
- scom_unmap(m);
-}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
deleted file mode 100644
index a563a8a..0000000
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __WSP_H
-#define __WSP_H
-
-#include <asm/wsp.h>
-
-/* Devtree compatible strings for major devices */
-#define PCIE_COMPATIBLE "ibm,wsp-pciex"
-
-extern void wsp_setup_arch(void);
-extern void wsp_setup_irq(void);
-extern int wsp_probe_devices(void);
-extern void wsp_halt(void);
-
-extern void wsp_setup_pci(void);
-extern void scom_init_wsp(void);
-
-extern void a2_setup_smp(void);
-extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
- struct device_node *np);
-extern int smp_a2_kick_cpu(int nr);
-
-extern void opb_pic_init(void);
-
-/* chroma specific managment */
-extern void wsp_h8_restart(char *cmd);
-extern void wsp_h8_power_off(void);
-extern void __init wsp_setup_h8(void);
-
-#endif /* __WSP_H */
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
deleted file mode 100644
index 9a15e5b..0000000
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*
- * Copyright 2010 Ben Herrenschmidt, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/debugfs.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/ppc-pci.h>
-#include <asm/iommu.h>
-#include <asm/io-workarounds.h>
-#include <asm/debug.h>
-
-#include "wsp.h"
-#include "wsp_pci.h"
-#include "msi.h"
-
-
-/* Max number of TVTs for one table. Only 32-bit tables can use
- * multiple TVTs and so the max currently supported is thus 8
- * since only 2G of DMA space is supported
- */
-#define MAX_TABLE_TVT_COUNT 8
-
-struct wsp_dma_table {
- struct list_head link;
- struct iommu_table table;
- struct wsp_phb *phb;
- struct page *tces[MAX_TABLE_TVT_COUNT];
-};
-
-/* We support DMA regions from 0...2G in 32bit space (no support for
- * 64-bit DMA just yet). Each device gets a separate TCE table (TVT
- * entry) with validation enabled (though not supported by SimiCS
- * just yet).
- *
- * To simplify things, we divide this 2G space into N regions based
- * on the constant below which could be turned into a tunable eventually
- *
- * We then assign dynamically those regions to devices as they show up.
- *
- * We use a bitmap as an allocator for these.
- *
- * Tables are allocated/created dynamically as devices are discovered,
- * multiple TVT entries are used if needed
- *
- * When 64-bit DMA support is added we should simply use a separate set
- * of larger regions (the HW supports 64 TVT entries). We can
- * additionally create a bypass region in 64-bit space for performances
- * though that would have a cost in term of security.
- *
- * If you set NUM_DMA32_REGIONS to 1, then a single table is shared
- * for all devices and bus/dev/fn validation is disabled
- *
- * Note that a DMA32 region cannot be smaller than 256M so the max
- * supported here for now is 8. We don't yet support sharing regions
- * between multiple devices so the max number of devices supported
- * is MAX_TABLE_TVT_COUNT.
- */
-#define NUM_DMA32_REGIONS 1
-
-struct wsp_phb {
- struct pci_controller *hose;
-
- /* Lock controlling access to the list of dma tables.
- * It does -not- protect against dma_* operations on
- * those tables, those should be stopped before an entry
- * is removed from the list.
- *
- * The lock is also used for error handling operations
- */
- spinlock_t lock;
- struct list_head dma_tables;
- unsigned long dma32_map;
- unsigned long dma32_base;
- unsigned int dma32_num_regions;
- unsigned long dma32_region_size;
-
- /* Debugfs stuff */
- struct dentry *ddir;
-
- struct list_head all;
-};
-static LIST_HEAD(wsp_phbs);
-
-//#define cfg_debug(fmt...) pr_debug(fmt)
-#define cfg_debug(fmt...)
-
-
-static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- int suboff;
- u64 addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset >= 0x1000)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = PCIE_REG_CA_ENABLE |
- ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
- ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
- ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
- suboff = offset & 3;
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
-
- switch (len) {
- case 1:
- addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
- >> (suboff << 3)) & 0xff;
- cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- case 2:
- addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
- >> (suboff << 3)) & 0xffff;
- cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- default:
- addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
- cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, *val);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- int suboff;
- u64 addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset >= 0x1000)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- addr = PCIE_REG_CA_ENABLE |
- ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
- ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
- ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
- suboff = offset & 3;
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- val <<= suboff << 3;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- case 2:
- addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
- val <<= suboff << 3;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- default:
- addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
- out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
- out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
- cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
- bus->number, devfn >> 3, devfn & 7,
- offset, suboff, addr, val);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops wsp_pcie_pci_ops =
-{
- .read = wsp_pcie_read_config,
- .write = wsp_pcie_write_config,
-};
-
-#define TCE_SHIFT 12
-#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
-#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
-#define TCE_PCI_READ 0x1 /* read from PCI allowed */
-#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */
-#define TCE_RPN_SHIFT 12
-
-//#define dma_debug(fmt...) pr_debug(fmt)
-#define dma_debug(fmt...)
-
-static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
- unsigned long uaddr, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct wsp_dma_table *ptbl = container_of(tbl,
- struct wsp_dma_table,
- table);
- u64 proto_tce;
- u64 *tcep;
- u64 rpn;
-
- proto_tce = TCE_PCI_READ;
-#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- proto_tce |= TCE_PCI_WRITE;
-#else
- if (direction != DMA_TO_DEVICE)
- proto_tce |= TCE_PCI_WRITE;
-#endif
-
- /* XXX Make this faster by factoring out the page address for
- * within a TCE table
- */
- while (npages--) {
- /* We don't use it->base as the table can be scattered */
- tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
- tcep += (index & 0xffff);
-
- /* can't move this out since we might cross LMB boundary */
- rpn = __pa(uaddr) >> TCE_SHIFT;
- *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
-
- dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
- tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT_4K);
-
- uaddr += TCE_PAGE_SIZE;
- index++;
- }
- return 0;
-}
-
-static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
-{
- struct wsp_dma_table *ptbl = container_of(tbl,
- struct wsp_dma_table,
- table);
-#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- struct pci_controller *hose = ptbl->phb->hose;
-#endif
- u64 *tcep;
-
- /* XXX Make this faster by factoring out the page address for
- * within a TCE table. Also use line-kill option to kill multiple
- * TCEs at once
- */
- while (npages--) {
- /* We don't use it->base as the table can be scattered */
- tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
- tcep += (index & 0xffff);
- dma_debug("[DMA] TCE %p cleared\n", tcep);
- *tcep = 0;
-#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- /* Don't write there since it would pollute other MMIO accesses */
- out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
- PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
- (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
-#endif
- index++;
- }
-}
-
-static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
- unsigned int region,
- struct pci_dev *validate)
-{
- struct pci_controller *hose = phb->hose;
- unsigned long size = phb->dma32_region_size;
- unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
- struct wsp_dma_table *tbl;
- int tvts_per_table, i, tvt, nid;
- unsigned long flags;
-
- nid = of_node_to_nid(phb->hose->dn);
-
- /* Calculate how many TVTs are needed */
- tvts_per_table = size / 0x10000000;
- if (tvts_per_table == 0)
- tvts_per_table = 1;
-
- /* Calculate the base TVT index. We know all tables have the same
- * size so we just do a simple multiply here
- */
- tvt = region * tvts_per_table;
-
- pr_debug(" Region : %d\n", region);
- pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
- pr_debug(" Number of TVTs : %d\n", tvts_per_table);
- pr_debug(" Base TVT : %d\n", tvt);
- pr_debug(" Node : %d\n", nid);
-
- tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
- if (!tbl)
- return ERR_PTR(-ENOMEM);
- tbl->phb = phb;
-
- /* Create as many TVTs as needed, each represents 256M at most */
- for (i = 0; i < tvts_per_table; i++) {
- u64 tvt_data1, tvt_data0;
-
- /* Allocate table. We use a 4K TCE size for now always so
- * one table is always 8 * (258M / 4K) == 512K
- */
- tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
- if (tbl->tces[i] == NULL)
- goto fail;
- memset(page_address(tbl->tces[i]), 0, 0x80000);
-
- pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
-
- /* Table size. We currently set it to be the whole 256M region */
- tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
- /* IO page size set to 4K */
- tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
- /* Shift in the address */
- tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
-
- /* Validation stuff. We only validate fully bus/dev/fn for now
- * one day maybe we can group devices but that isn't the case
- * at the moment
- */
- if (validate) {
- tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
- tvt_data0 |= validate->bus->number;
- tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
- tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
- << IODA_TVT1_DEVNUM_VALUE_SHIFT;
- tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
- tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
- << IODA_TVT1_FUNCNUM_VALUE_SHIFT;
- }
-
- /* XX PE number is always 0 for now */
-
- /* Program the values using the PHB lock */
- spin_lock_irqsave(&phb->lock, flags);
- out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
- (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
- spin_unlock_irqrestore(&phb->lock, flags);
- }
-
- /* Init bits and pieces */
- tbl->table.it_blocksize = 16;
- tbl->table.it_page_shift = IOMMU_PAGE_SHIFT_4K;
- tbl->table.it_offset = addr >> tbl->table.it_page_shift;
- tbl->table.it_size = size >> tbl->table.it_page_shift;
-
- /*
- * It's already blank but we clear it anyway.
- * Consider an aditiona interface that makes cleaing optional
- */
- iommu_init_table(&tbl->table, nid);
-
- list_add(&tbl->link, &phb->dma_tables);
- return tbl;
-
- fail:
- pr_debug(" Failed to allocate a 256M TCE table !\n");
- for (i = 0; i < tvts_per_table; i++)
- if (tbl->tces[i])
- __free_pages(tbl->tces[i], get_order(0x80000));
- kfree(tbl);
- return ERR_PTR(-ENOMEM);
-}
-
-static void wsp_pci_dma_dev_setup(struct pci_dev *pdev)
-{
- struct dev_archdata *archdata = &pdev->dev.archdata;
- struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- struct wsp_phb *phb = hose->private_data;
- struct wsp_dma_table *table = NULL;
- unsigned long flags;
- int i;
-
- /* Don't assign an iommu table to a bridge */
- if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- return;
-
- pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
-
- spin_lock_irqsave(&phb->lock, flags);
-
- /* If only one region, check if it already exist */
- if (phb->dma32_num_regions == 1) {
- spin_unlock_irqrestore(&phb->lock, flags);
- if (list_empty(&phb->dma_tables))
- table = wsp_pci_create_dma32_table(phb, 0, NULL);
- else
- table = list_first_entry(&phb->dma_tables,
- struct wsp_dma_table,
- link);
- } else {
- /* else find a free region */
- for (i = 0; i < phb->dma32_num_regions && !table; i++) {
- if (__test_and_set_bit(i, &phb->dma32_map))
- continue;
- spin_unlock_irqrestore(&phb->lock, flags);
- table = wsp_pci_create_dma32_table(phb, i, pdev);
- }
- }
-
- /* Check if we got an error */
- if (IS_ERR(table)) {
- pr_err("%s: Failed to create DMA table, err %ld !\n",
- pci_name(pdev), PTR_ERR(table));
- return;
- }
-
- /* Or a valid table */
- if (table) {
- pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
- pci_name(pdev),
- table->table.it_offset << IOMMU_PAGE_SHIFT_4K,
- (table->table.it_offset << IOMMU_PAGE_SHIFT_4K)
- + phb->dma32_region_size - 1);
- archdata->dma_data.iommu_table_base = &table->table;
- return;
- }
-
- /* Or no room */
- spin_unlock_irqrestore(&phb->lock, flags);
- pr_err("%s: Out of DMA space !\n", pci_name(pdev));
-}
-
-static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
-{
- u64 val;
- int i;
-
-#define DUMP_REG(x) \
- pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-
- /*
- * Some WSP variants has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge
- */
- val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
- pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
- out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
- (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
- pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-
-#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
- /* XXX Disable TCE caching, it doesn't work on DD1 */
- out_be64(hose->cfg_data + 0xe50,
- in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
- printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
-#endif
-
- /* Configure M32A and IO. IO is hard wired to be 1M for now */
- out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
- out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
- (~(hose->io_resource.end - hose->io_resource.start)) &
- 0x3fffffff000ul);
- out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
-
- out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
- hose->mem_resources[0].start);
- printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
- (~(hose->mem_resources[0].end -
- hose->mem_resources[0].start)) & 0x3ffffff0000ul);
- out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
- (~(hose->mem_resources[0].end -
- hose->mem_resources[0].start)) & 0x3ffffff0000ul);
- out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
- (hose->mem_resources[0].start - hose->mem_offset[0]) | 1);
-
- /* Clear all TVT entries
- *
- * XX Might get TVT count from device-tree
- */
- for (i = 0; i < IODA_TVT_COUNT; i++) {
- out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
- PCIE_REG_IODA_AD_TBL_TVT | i);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
- out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
- }
-
- /* Kill the TCE cache */
- out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
- in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
- PCIE_REG_PHBC_64B_TCE_EN);
-
- /* Enable 32 & 64-bit MSIs, IO space and M32A */
- val = PCIE_REG_PHBC_32BIT_MSI_EN |
- PCIE_REG_PHBC_IO_EN |
- PCIE_REG_PHBC_64BIT_MSI_EN |
- PCIE_REG_PHBC_M32A_EN;
- if (iommu_is_off)
- val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
- pr_debug("Will write config: 0x%llx\n", val);
- out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
-
- /* Enable error reporting */
- out_be64(hose->cfg_data + 0xe00,
- in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
-
- /* Mask an error that's generated when doing config space probe
- *
- * XXX Maybe we should only mask it around config space cycles... that or
- * ignore it when we know we had a config space cycle recently ?
- */
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
-
- /* Enable UTL errors, for now, all of them got to UTL irq 1
- *
- * We similarily mask one UTL error caused apparently during normal
- * probing. We also mask the link up error
- */
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
- out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
- out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
-
- DUMP_REG(PCIE_REG_IO_BASE_ADDR);
- DUMP_REG(PCIE_REG_IO_BASE_MASK);
- DUMP_REG(PCIE_REG_IO_START_ADDR);
- DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
- DUMP_REG(PCIE_REG_M32A_BASE_MASK);
- DUMP_REG(PCIE_REG_M32A_START_ADDR);
- DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
- DUMP_REG(PCIE_REG_M32B_BASE_MASK);
- DUMP_REG(PCIE_REG_M32B_START_ADDR);
- DUMP_REG(PCIE_REG_M64_BASE_ADDR);
- DUMP_REG(PCIE_REG_M64_BASE_MASK);
- DUMP_REG(PCIE_REG_M64_START_ADDR);
- DUMP_REG(PCIE_REG_PHB_CONFIG);
-}
-
-static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
-{
- u64 val;
- int i;
-
- for (i = 0; i < 10000; i++) {
- val = in_be64(phb->hose->cfg_data + 0xe08);
- if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
- return;
- udelay(1);
- }
- pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
- phb->hose->global_number, port);
-}
-
-#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \
-static ret wsp_pci_##name at \
-{ \
- struct iowa_bus *bus; \
- struct wsp_phb *phb; \
- unsigned long flags; \
- ret rval; \
- bus = iowa_pio_find_bus(aa); \
- WARN_ON(!bus); \
- phb = bus->private; \
- spin_lock_irqsave(&phb->lock, flags); \
- wsp_pci_wait_io_idle(phb, aa); \
- rval = __do_##name al; \
- spin_unlock_irqrestore(&phb->lock, flags); \
- return rval; \
-}
-
-#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \
-static void wsp_pci_##name at \
-{ \
- struct iowa_bus *bus; \
- struct wsp_phb *phb; \
- unsigned long flags; \
- bus = iowa_pio_find_bus(aa); \
- WARN_ON(!bus); \
- phb = bus->private; \
- spin_lock_irqsave(&phb->lock, flags); \
- wsp_pci_wait_io_idle(phb, aa); \
- __do_##name al; \
- spin_unlock_irqrestore(&phb->lock, flags); \
-}
-
-#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
-#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
-
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
- DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
-
-#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
- DEF_PCI_AC_NORET_##space(name, at, al, aa) \
-
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-static struct ppc_pci_io wsp_pci_iops = {
- .inb = wsp_pci_inb,
- .inw = wsp_pci_inw,
- .inl = wsp_pci_inl,
- .outb = wsp_pci_outb,
- .outw = wsp_pci_outw,
- .outl = wsp_pci_outl,
- .insb = wsp_pci_insb,
- .insw = wsp_pci_insw,
- .insl = wsp_pci_insl,
- .outsb = wsp_pci_outsb,
- .outsw = wsp_pci_outsw,
- .outsl = wsp_pci_outsl,
-};
-
-static int __init wsp_setup_one_phb(struct device_node *np)
-{
- struct pci_controller *hose;
- struct wsp_phb *phb;
-
- pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
-
- phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
- if (!phb)
- return -ENOMEM;
- hose = pcibios_alloc_controller(np);
- if (!hose) {
- /* Can't really free the phb */
- return -ENOMEM;
- }
- hose->private_data = phb;
- phb->hose = hose;
-
- INIT_LIST_HEAD(&phb->dma_tables);
- spin_lock_init(&phb->lock);
-
- /* XXX Use bus-range property ? */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* We use cfg_data as the address for the whole bridge MMIO space
- */
- hose->cfg_data = of_iomap(hose->dn, 0);
-
- pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
-
- /* Get the ranges of the device-tree */
- pci_process_bridge_OF_ranges(hose, np, 0);
-
- /* XXX Force re-assigning of everything for now */
- pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
- PCI_ENABLE_PROC_DOMAINS);
-
- /* Calculate how the TCE space is divided */
- phb->dma32_base = 0;
- phb->dma32_num_regions = NUM_DMA32_REGIONS;
- if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
- pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
- MAX_TABLE_TVT_COUNT);
- phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
- }
- phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions;
-
- BUG_ON(!is_power_of_2(phb->dma32_region_size));
-
- /* Setup config ops */
- hose->ops = &wsp_pcie_pci_ops;
-
- /* Configure the HW */
- wsp_pcie_configure_hw(hose);
-
- /* Instanciate IO workarounds */
- iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
-#ifdef CONFIG_PCI_MSI
- wsp_setup_phb_msi(hose);
-#endif
-
- /* Add to global list */
- list_add(&phb->all, &wsp_phbs);
-
- return 0;
-}
-
-void __init wsp_setup_pci(void)
-{
- struct device_node *np;
- int rc;
-
- /* Find host bridges */
- for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
- rc = wsp_setup_one_phb(np);
- if (rc)
- pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
- np->full_name, rc);
- }
-
- /* Establish device-tree linkage */
- pci_devs_phb_init();
-
- /* Set DMA ops to use TCEs */
- if (iommu_is_off) {
- pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
- set_pci_dma_ops(&dma_direct_ops);
- } else {
- ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
- ppc_md.tce_build = tce_build_wsp;
- ppc_md.tce_free = tce_free_wsp;
- set_pci_dma_ops(&dma_iommu_ops);
- }
-}
-
-#define err_debug(fmt...) pr_debug(fmt)
-//#define err_debug(fmt...)
-
-static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
-{
- const u32 *prop;
- int hw_irq;
-
- /* Ok, no interrupts property, let's try to find our child P2P */
- np = of_get_next_child(np, NULL);
- if (np == NULL)
- return 0;
-
- /* Grab it's interrupt map */
- prop = of_get_property(np, "interrupt-map", NULL);
- if (prop == NULL)
- return 0;
-
- /* Grab one of the interrupts in there, keep the low 4 bits */
- hw_irq = prop[5] & 0xf;
-
- /* 0..4 for PHB 0 and 5..9 for PHB 1 */
- if (hw_irq < 5)
- hw_irq = 4;
- else
- hw_irq = 9;
- hw_irq |= prop[5] & ~0xf;
-
- err_debug("PCI: Using 0x%x as error IRQ for %s\n",
- hw_irq, np->parent->full_name);
- return irq_create_mapping(NULL, hw_irq);
-}
-
-static const struct {
- u32 offset;
- const char *name;
-} wsp_pci_regs[] = {
-#define DREG(x) { PCIE_REG_##x, #x }
-#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
- /* Architected registers except CONFIG_ and IODA
- * to avoid side effects
- */
- DREG(DMA_CHAN_STATUS),
- DREG(CPU_LOADSTORE_STATUS),
- DREG(LOCK0),
- DREG(LOCK1),
- DREG(PHB_CONFIG),
- DREG(IO_BASE_ADDR),
- DREG(IO_BASE_MASK),
- DREG(IO_START_ADDR),
- DREG(M32A_BASE_ADDR),
- DREG(M32A_BASE_MASK),
- DREG(M32A_START_ADDR),
- DREG(M32B_BASE_ADDR),
- DREG(M32B_BASE_MASK),
- DREG(M32B_START_ADDR),
- DREG(M64_BASE_ADDR),
- DREG(M64_BASE_MASK),
- DREG(M64_START_ADDR),
- DREG(TCE_KILL),
- DREG(LOCK2),
- DREG(PHB_GEN_CAP),
- DREG(PHB_TCE_CAP),
- DREG(PHB_IRQ_CAP),
- DREG(PHB_EEH_CAP),
- DREG(PAPR_ERR_INJ_CONTROL),
- DREG(PAPR_ERR_INJ_ADDR),
- DREG(PAPR_ERR_INJ_MASK),
-
- /* UTL core regs */
- DUTL(SYS_BUS_CONTROL),
- DUTL(STATUS),
- DUTL(SYS_BUS_AGENT_STATUS),
- DUTL(SYS_BUS_AGENT_ERR_SEV),
- DUTL(SYS_BUS_AGENT_IRQ_EN),
- DUTL(SYS_BUS_BURST_SZ_CONF),
- DUTL(REVISION_ID),
- DUTL(OUT_POST_HDR_BUF_ALLOC),
- DUTL(OUT_POST_DAT_BUF_ALLOC),
- DUTL(IN_POST_HDR_BUF_ALLOC),
- DUTL(IN_POST_DAT_BUF_ALLOC),
- DUTL(OUT_NP_BUF_ALLOC),
- DUTL(IN_NP_BUF_ALLOC),
- DUTL(PCIE_TAGS_ALLOC),
- DUTL(GBIF_READ_TAGS_ALLOC),
-
- DUTL(PCIE_PORT_CONTROL),
- DUTL(PCIE_PORT_STATUS),
- DUTL(PCIE_PORT_ERROR_SEV),
- DUTL(PCIE_PORT_IRQ_EN),
- DUTL(RC_STATUS),
- DUTL(RC_ERR_SEVERITY),
- DUTL(RC_IRQ_EN),
- DUTL(EP_STATUS),
- DUTL(EP_ERR_SEVERITY),
- DUTL(EP_ERR_IRQ_EN),
- DUTL(PCI_PM_CTRL1),
- DUTL(PCI_PM_CTRL2),
-
- /* PCIe stack regs */
- DREG(SYSTEM_CONFIG1),
- DREG(SYSTEM_CONFIG2),
- DREG(EP_SYSTEM_CONFIG),
- DREG(EP_FLR),
- DREG(EP_BAR_CONFIG),
- DREG(LINK_CONFIG),
- DREG(PM_CONFIG),
- DREG(DLP_CONTROL),
- DREG(DLP_STATUS),
- DREG(ERR_REPORT_CONTROL),
- DREG(SLOT_CONTROL1),
- DREG(SLOT_CONTROL2),
- DREG(UTL_CONFIG),
- DREG(BUFFERS_CONFIG),
- DREG(ERROR_INJECT),
- DREG(SRIOV_CONFIG),
- DREG(PF0_SRIOV_STATUS),
- DREG(PF1_SRIOV_STATUS),
- DREG(PORT_NUMBER),
- DREG(POR_SYSTEM_CONFIG),
-
- /* Internal logic regs */
- DREG(PHB_VERSION),
- DREG(RESET),
- DREG(PHB_CONTROL),
- DREG(PHB_TIMEOUT_CONTROL1),
- DREG(PHB_QUIESCE_DMA),
- DREG(PHB_DMA_READ_TAG_ACTV),
- DREG(PHB_TCE_READ_TAG_ACTV),
-
- /* FIR registers */
- DREG(LEM_FIR_ACCUM),
- DREG(LEM_FIR_AND_MASK),
- DREG(LEM_FIR_OR_MASK),
- DREG(LEM_ACTION0),
- DREG(LEM_ACTION1),
- DREG(LEM_ERROR_MASK),
- DREG(LEM_ERROR_AND_MASK),
- DREG(LEM_ERROR_OR_MASK),
-
- /* Error traps registers */
- DREG(PHB_ERR_STATUS),
- DREG(PHB_ERR_STATUS),
- DREG(PHB_ERR1_STATUS),
- DREG(PHB_ERR_INJECT),
- DREG(PHB_ERR_LEM_ENABLE),
- DREG(PHB_ERR_IRQ_ENABLE),
- DREG(PHB_ERR_FREEZE_ENABLE),
- DREG(PHB_ERR_SIDE_ENABLE),
- DREG(PHB_ERR_LOG_0),
- DREG(PHB_ERR_LOG_1),
- DREG(PHB_ERR_STATUS_MASK),
- DREG(PHB_ERR1_STATUS_MASK),
- DREG(MMIO_ERR_STATUS),
- DREG(MMIO_ERR1_STATUS),
- DREG(MMIO_ERR_INJECT),
- DREG(MMIO_ERR_LEM_ENABLE),
- DREG(MMIO_ERR_IRQ_ENABLE),
- DREG(MMIO_ERR_FREEZE_ENABLE),
- DREG(MMIO_ERR_SIDE_ENABLE),
- DREG(MMIO_ERR_LOG_0),
- DREG(MMIO_ERR_LOG_1),
- DREG(MMIO_ERR_STATUS_MASK),
- DREG(MMIO_ERR1_STATUS_MASK),
- DREG(DMA_ERR_STATUS),
- DREG(DMA_ERR1_STATUS),
- DREG(DMA_ERR_INJECT),
- DREG(DMA_ERR_LEM_ENABLE),
- DREG(DMA_ERR_IRQ_ENABLE),
- DREG(DMA_ERR_FREEZE_ENABLE),
- DREG(DMA_ERR_SIDE_ENABLE),
- DREG(DMA_ERR_LOG_0),
- DREG(DMA_ERR_LOG_1),
- DREG(DMA_ERR_STATUS_MASK),
- DREG(DMA_ERR1_STATUS_MASK),
-
- /* Debug and Trace registers */
- DREG(PHB_DEBUG_CONTROL0),
- DREG(PHB_DEBUG_STATUS0),
- DREG(PHB_DEBUG_CONTROL1),
- DREG(PHB_DEBUG_STATUS1),
- DREG(PHB_DEBUG_CONTROL2),
- DREG(PHB_DEBUG_STATUS2),
- DREG(PHB_DEBUG_CONTROL3),
- DREG(PHB_DEBUG_STATUS3),
- DREG(PHB_DEBUG_CONTROL4),
- DREG(PHB_DEBUG_STATUS4),
- DREG(PHB_DEBUG_CONTROL5),
- DREG(PHB_DEBUG_STATUS5),
-
- /* Don't seem to exist ...
- DREG(PHB_DEBUG_CONTROL6),
- DREG(PHB_DEBUG_STATUS6),
- */
-};
-
-static int wsp_pci_regs_show(struct seq_file *m, void *private)
-{
- struct wsp_phb *phb = m->private;
- struct pci_controller *hose = phb->hose;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
- /* Skip write-only regs */
- if (wsp_pci_regs[i].offset == 0xc08 ||
- wsp_pci_regs[i].offset == 0xc10 ||
- wsp_pci_regs[i].offset == 0xc38 ||
- wsp_pci_regs[i].offset == 0xc40)
- continue;
- seq_printf(m, "0x%03x: 0x%016llx %s\n",
- wsp_pci_regs[i].offset,
- in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
- wsp_pci_regs[i].name);
- }
- return 0;
-}
-
-static int wsp_pci_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, wsp_pci_regs_show, inode->i_private);
-}
-
-static const struct file_operations wsp_pci_regs_fops = {
- .open = wsp_pci_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int wsp_pci_reg_set(void *data, u64 val)
-{
- out_be64((void __iomem *)data, val);
- return 0;
-}
-
-static int wsp_pci_reg_get(void *data, u64 *val)
-{
- *val = in_be64((void __iomem *)data);
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
-
-static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
-{
- struct wsp_phb *phb = dev_id;
- struct pci_controller *hose = phb->hose;
- irqreturn_t handled = IRQ_NONE;
- struct wsp_pcie_err_log_data ed;
-
- pr_err("PCI: Error interrupt on %s (PHB %d)\n",
- hose->dn->full_name, hose->global_number);
- again:
- memset(&ed, 0, sizeof(ed));
-
- /* Read and clear UTL errors */
- ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
- if (ed.utl_sys_err)
- out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
- ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
- if (ed.utl_port_err)
- out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
- ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
- if (ed.utl_rc_err)
- out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
-
- /* Read and clear main trap errors */
- ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
- if (ed.phb_err) {
- ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
- ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
- ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
- }
- ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
- if (ed.mmio_err) {
- ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
- ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
- ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
- }
- ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
- if (ed.dma_err) {
- ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
- ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
- ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
- }
-
- /* Now print things out */
- if (ed.phb_err) {
- pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err);
- pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1);
- pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0);
- pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1);
- }
- if (ed.mmio_err) {
- pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err);
- pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
- pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0);
- pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1);
- }
- if (ed.dma_err) {
- pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err);
- pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1);
- pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0);
- pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1);
- }
- if (ed.utl_sys_err)
- pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err);
- if (ed.utl_port_err)
- pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
- if (ed.utl_rc_err)
- pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err);
-
- /* Interrupts are caused by the error traps. If we had any error there
- * we loop again in case the UTL buffered some new stuff between
- * going there and going to the traps
- */
- if (ed.dma_err || ed.mmio_err || ed.phb_err) {
- handled = IRQ_HANDLED;
- goto again;
- }
- return handled;
-}
-
-static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
-{
- struct pci_controller *hose = phb->hose;
- int err_irq, i, rc;
- char fname[16];
-
- /* Create a debugfs file for that PHB */
- sprintf(fname, "phb%d", phb->hose->global_number);
- phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
-
- /* Some useful debug output */
- if (phb->ddir) {
- struct dentry *d = debugfs_create_dir("regs", phb->ddir);
- char tmp[64];
-
- for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
- sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
- wsp_pci_regs[i].name);
- debugfs_create_file(tmp, 0600, d,
- hose->cfg_data + wsp_pci_regs[i].offset,
- &wsp_pci_reg_fops);
- }
- debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
- }
-
- /* Find the IRQ number for that PHB */
- err_irq = irq_of_parse_and_map(hose->dn, 0);
- if (err_irq == 0)
- /* XXX Error IRQ lacking from device-tree */
- err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
- if (err_irq == 0) {
- pr_err("PCI: Failed to fetch error interrupt for %s\n",
- hose->dn->full_name);
- return;
- }
- /* Request it */
- rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
- if (rc) {
- pr_err("PCI: Failed to request interrupt for %s\n",
- hose->dn->full_name);
- }
- /* Enable interrupts for all errors for now */
- out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
- out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
- out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
-}
-
-/*
- * This is called later to hookup with the error interrupt
- */
-static int __init wsp_setup_pci_late(void)
-{
- struct wsp_phb *phb;
-
- list_for_each_entry(phb, &wsp_phbs, all)
- wsp_setup_pci_err_reporting(phb);
-
- return 0;
-}
-arch_initcall(wsp_setup_pci_late);
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.h b/arch/powerpc/platforms/wsp/wsp_pci.h
deleted file mode 100644
index 52e9bd9..0000000
--- a/arch/powerpc/platforms/wsp/wsp_pci.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2010 Ben Herrenschmidt, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __WSP_PCI_H
-#define __WSP_PCI_H
-
-/* Architected registers */
-#define PCIE_REG_DMA_CHAN_STATUS 0x110
-#define PCIE_REG_CPU_LOADSTORE_STATUS 0x120
-
-#define PCIE_REG_CONFIG_DATA 0x130
-#define PCIE_REG_LOCK0 0x138
-#define PCIE_REG_CONFIG_ADDRESS 0x140
-#define PCIE_REG_CA_ENABLE 0x8000000000000000ull
-#define PCIE_REG_CA_BUS_MASK 0x0ff0000000000000ull
-#define PCIE_REG_CA_BUS_SHIFT (20+32)
-#define PCIE_REG_CA_DEV_MASK 0x000f800000000000ull
-#define PCIE_REG_CA_DEV_SHIFT (15+32)
-#define PCIE_REG_CA_FUNC_MASK 0x0000700000000000ull
-#define PCIE_REG_CA_FUNC_SHIFT (12+32)
-#define PCIE_REG_CA_REG_MASK 0x00000fff00000000ull
-#define PCIE_REG_CA_REG_SHIFT ( 0+32)
-#define PCIE_REG_CA_BE_MASK 0x00000000f0000000ull
-#define PCIE_REG_CA_BE_SHIFT ( 28)
-#define PCIE_REG_LOCK1 0x148
-
-#define PCIE_REG_PHB_CONFIG 0x160
-#define PCIE_REG_PHBC_64B_TCE_EN 0x2000000000000000ull
-#define PCIE_REG_PHBC_MMIO_DMA_FREEZE_EN 0x1000000000000000ull
-#define PCIE_REG_PHBC_32BIT_MSI_EN 0x0080000000000000ull
-#define PCIE_REG_PHBC_M64_EN 0x0040000000000000ull
-#define PCIE_REG_PHBC_IO_EN 0x0008000000000000ull
-#define PCIE_REG_PHBC_64BIT_MSI_EN 0x0002000000000000ull
-#define PCIE_REG_PHBC_M32A_EN 0x0000800000000000ull
-#define PCIE_REG_PHBC_M32B_EN 0x0000400000000000ull
-#define PCIE_REG_PHBC_MSI_PE_VALIDATE 0x0000200000000000ull
-#define PCIE_REG_PHBC_DMA_XLATE_BYPASS 0x0000100000000000ull
-
-#define PCIE_REG_IO_BASE_ADDR 0x170
-#define PCIE_REG_IO_BASE_MASK 0x178
-#define PCIE_REG_IO_START_ADDR 0x180
-
-#define PCIE_REG_M32A_BASE_ADDR 0x190
-#define PCIE_REG_M32A_BASE_MASK 0x198
-#define PCIE_REG_M32A_START_ADDR 0x1a0
-
-#define PCIE_REG_M32B_BASE_ADDR 0x1b0
-#define PCIE_REG_M32B_BASE_MASK 0x1b8
-#define PCIE_REG_M32B_START_ADDR 0x1c0
-
-#define PCIE_REG_M64_BASE_ADDR 0x1e0
-#define PCIE_REG_M64_BASE_MASK 0x1e8
-#define PCIE_REG_M64_START_ADDR 0x1f0
-
-#define PCIE_REG_TCE_KILL 0x210
-#define PCIE_REG_TCEKILL_SINGLE 0x8000000000000000ull
-#define PCIE_REG_TCEKILL_ADDR_MASK 0x000003fffffffff8ull
-#define PCIE_REG_TCEKILL_PS_4K 0
-#define PCIE_REG_TCEKILL_PS_64K 1
-#define PCIE_REG_TCEKILL_PS_16M 2
-#define PCIE_REG_TCEKILL_PS_16G 3
-
-#define PCIE_REG_IODA_ADDR 0x220
-#define PCIE_REG_IODA_AD_AUTOINC 0x8000000000000000ull
-#define PCIE_REG_IODA_AD_TBL_MVT 0x0005000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PELT 0x0006000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PESTA 0x0007000000000000ull
-#define PCIE_REG_IODA_AD_TBL_PESTB 0x0008000000000000ull
-#define PCIE_REG_IODA_AD_TBL_TVT 0x0009000000000000ull
-#define PCIE_REG_IODA_AD_TBL_TCE 0x000a000000000000ull
-#define PCIE_REG_IODA_DATA0 0x228
-#define PCIE_REG_IODA_DATA1 0x230
-
-#define PCIE_REG_LOCK2 0x240
-
-#define PCIE_REG_PHB_GEN_CAP 0x250
-#define PCIE_REG_PHB_TCE_CAP 0x258
-#define PCIE_REG_PHB_IRQ_CAP 0x260
-#define PCIE_REG_PHB_EEH_CAP 0x268
-
-#define PCIE_REG_PAPR_ERR_INJ_CONTROL 0x2b0
-#define PCIE_REG_PAPR_ERR_INJ_ADDR 0x2b8
-#define PCIE_REG_PAPR_ERR_INJ_MASK 0x2c0
-
-
-#define PCIE_REG_SYS_CFG1 0x600
-#define PCIE_REG_SYS_CFG1_CLASS_CODE 0x0000000000ffffffull
-
-#define IODA_TVT0_TTA_MASK 0x000fffffffff0000ull
-#define IODA_TVT0_TTA_SHIFT 4
-#define IODA_TVT0_BUSNUM_VALID_MASK 0x000000000000e000ull
-#define IODA_TVT0_TCE_TABLE_SIZE_MASK 0x0000000000001f00ull
-#define IODA_TVT0_TCE_TABLE_SIZE_SHIFT 8
-#define IODA_TVT0_BUSNUM_VALUE_MASK 0x00000000000000ffull
-#define IODA_TVT0_BUSNUM_VALID_SHIFT 0
-#define IODA_TVT1_DEVNUM_VALID 0x2000000000000000ull
-#define IODA_TVT1_DEVNUM_VALUE_MASK 0x1f00000000000000ull
-#define IODA_TVT1_DEVNUM_VALUE_SHIFT 56
-#define IODA_TVT1_FUNCNUM_VALID 0x0008000000000000ull
-#define IODA_TVT1_FUNCNUM_VALUE_MASK 0x0007000000000000ull
-#define IODA_TVT1_FUNCNUM_VALUE_SHIFT 48
-#define IODA_TVT1_IO_PAGE_SIZE_MASK 0x00001f0000000000ull
-#define IODA_TVT1_IO_PAGE_SIZE_SHIFT 40
-#define IODA_TVT1_PE_NUMBER_MASK 0x000000000000003full
-#define IODA_TVT1_PE_NUMBER_SHIFT 0
-
-#define IODA_TVT_COUNT 64
-
-/* UTL Core registers */
-#define PCIE_UTL_SYS_BUS_CONTROL 0x400
-#define PCIE_UTL_STATUS 0x408
-#define PCIE_UTL_SYS_BUS_AGENT_STATUS 0x410
-#define PCIE_UTL_SYS_BUS_AGENT_ERR_SEV 0x418
-#define PCIE_UTL_SYS_BUS_AGENT_IRQ_EN 0x420
-#define PCIE_UTL_SYS_BUS_BURST_SZ_CONF 0x440
-#define PCIE_UTL_REVISION_ID 0x448
-
-#define PCIE_UTL_OUT_POST_HDR_BUF_ALLOC 0x4c0
-#define PCIE_UTL_OUT_POST_DAT_BUF_ALLOC 0x4d0
-#define PCIE_UTL_IN_POST_HDR_BUF_ALLOC 0x4e0
-#define PCIE_UTL_IN_POST_DAT_BUF_ALLOC 0x4f0
-#define PCIE_UTL_OUT_NP_BUF_ALLOC 0x500
-#define PCIE_UTL_IN_NP_BUF_ALLOC 0x510
-#define PCIE_UTL_PCIE_TAGS_ALLOC 0x520
-#define PCIE_UTL_GBIF_READ_TAGS_ALLOC 0x530
-
-#define PCIE_UTL_PCIE_PORT_CONTROL 0x540
-#define PCIE_UTL_PCIE_PORT_STATUS 0x548
-#define PCIE_UTL_PCIE_PORT_ERROR_SEV 0x550
-#define PCIE_UTL_PCIE_PORT_IRQ_EN 0x558
-#define PCIE_UTL_RC_STATUS 0x560
-#define PCIE_UTL_RC_ERR_SEVERITY 0x568
-#define PCIE_UTL_RC_IRQ_EN 0x570
-#define PCIE_UTL_EP_STATUS 0x578
-#define PCIE_UTL_EP_ERR_SEVERITY 0x580
-#define PCIE_UTL_EP_ERR_IRQ_EN 0x588
-
-#define PCIE_UTL_PCI_PM_CTRL1 0x590
-#define PCIE_UTL_PCI_PM_CTRL2 0x598
-
-/* PCIe stack registers */
-#define PCIE_REG_SYSTEM_CONFIG1 0x600
-#define PCIE_REG_SYSTEM_CONFIG2 0x608
-#define PCIE_REG_EP_SYSTEM_CONFIG 0x618
-#define PCIE_REG_EP_FLR 0x620
-#define PCIE_REG_EP_BAR_CONFIG 0x628
-#define PCIE_REG_LINK_CONFIG 0x630
-#define PCIE_REG_PM_CONFIG 0x640
-#define PCIE_REG_DLP_CONTROL 0x650
-#define PCIE_REG_DLP_STATUS 0x658
-#define PCIE_REG_ERR_REPORT_CONTROL 0x660
-#define PCIE_REG_SLOT_CONTROL1 0x670
-#define PCIE_REG_SLOT_CONTROL2 0x678
-#define PCIE_REG_UTL_CONFIG 0x680
-#define PCIE_REG_BUFFERS_CONFIG 0x690
-#define PCIE_REG_ERROR_INJECT 0x698
-#define PCIE_REG_SRIOV_CONFIG 0x6a0
-#define PCIE_REG_PF0_SRIOV_STATUS 0x6a8
-#define PCIE_REG_PF1_SRIOV_STATUS 0x6b0
-#define PCIE_REG_PORT_NUMBER 0x700
-#define PCIE_REG_POR_SYSTEM_CONFIG 0x708
-
-/* PHB internal logic registers */
-#define PCIE_REG_PHB_VERSION 0x800
-#define PCIE_REG_RESET 0x808
-#define PCIE_REG_PHB_CONTROL 0x810
-#define PCIE_REG_PHB_TIMEOUT_CONTROL1 0x878
-#define PCIE_REG_PHB_QUIESCE_DMA 0x888
-#define PCIE_REG_PHB_DMA_READ_TAG_ACTV 0x900
-#define PCIE_REG_PHB_TCE_READ_TAG_ACTV 0x908
-
-/* FIR registers */
-#define PCIE_REG_LEM_FIR_ACCUM 0xc00
-#define PCIE_REG_LEM_FIR_AND_MASK 0xc08
-#define PCIE_REG_LEM_FIR_OR_MASK 0xc10
-#define PCIE_REG_LEM_ACTION0 0xc18
-#define PCIE_REG_LEM_ACTION1 0xc20
-#define PCIE_REG_LEM_ERROR_MASK 0xc30
-#define PCIE_REG_LEM_ERROR_AND_MASK 0xc38
-#define PCIE_REG_LEM_ERROR_OR_MASK 0xc40
-
-/* PHB Error registers */
-#define PCIE_REG_PHB_ERR_STATUS 0xc80
-#define PCIE_REG_PHB_ERR1_STATUS 0xc88
-#define PCIE_REG_PHB_ERR_INJECT 0xc90
-#define PCIE_REG_PHB_ERR_LEM_ENABLE 0xc98
-#define PCIE_REG_PHB_ERR_IRQ_ENABLE 0xca0
-#define PCIE_REG_PHB_ERR_FREEZE_ENABLE 0xca8
-#define PCIE_REG_PHB_ERR_SIDE_ENABLE 0xcb8
-#define PCIE_REG_PHB_ERR_LOG_0 0xcc0
-#define PCIE_REG_PHB_ERR_LOG_1 0xcc8
-#define PCIE_REG_PHB_ERR_STATUS_MASK 0xcd0
-#define PCIE_REG_PHB_ERR1_STATUS_MASK 0xcd8
-
-#define PCIE_REG_MMIO_ERR_STATUS 0xd00
-#define PCIE_REG_MMIO_ERR1_STATUS 0xd08
-#define PCIE_REG_MMIO_ERR_INJECT 0xd10
-#define PCIE_REG_MMIO_ERR_LEM_ENABLE 0xd18
-#define PCIE_REG_MMIO_ERR_IRQ_ENABLE 0xd20
-#define PCIE_REG_MMIO_ERR_FREEZE_ENABLE 0xd28
-#define PCIE_REG_MMIO_ERR_SIDE_ENABLE 0xd38
-#define PCIE_REG_MMIO_ERR_LOG_0 0xd40
-#define PCIE_REG_MMIO_ERR_LOG_1 0xd48
-#define PCIE_REG_MMIO_ERR_STATUS_MASK 0xd50
-#define PCIE_REG_MMIO_ERR1_STATUS_MASK 0xd58
-
-#define PCIE_REG_DMA_ERR_STATUS 0xd80
-#define PCIE_REG_DMA_ERR1_STATUS 0xd88
-#define PCIE_REG_DMA_ERR_INJECT 0xd90
-#define PCIE_REG_DMA_ERR_LEM_ENABLE 0xd98
-#define PCIE_REG_DMA_ERR_IRQ_ENABLE 0xda0
-#define PCIE_REG_DMA_ERR_FREEZE_ENABLE 0xda8
-#define PCIE_REG_DMA_ERR_SIDE_ENABLE 0xdb8
-#define PCIE_REG_DMA_ERR_LOG_0 0xdc0
-#define PCIE_REG_DMA_ERR_LOG_1 0xdc8
-#define PCIE_REG_DMA_ERR_STATUS_MASK 0xdd0
-#define PCIE_REG_DMA_ERR1_STATUS_MASK 0xdd8
-
-/* Shortcuts for access to the above using the PHB definitions
- * with an offset
- */
-#define PCIE_REG_ERR_PHB_OFFSET 0x0
-#define PCIE_REG_ERR_MMIO_OFFSET 0x80
-#define PCIE_REG_ERR_DMA_OFFSET 0x100
-
-/* Debug and Trace registers */
-#define PCIE_REG_PHB_DEBUG_CONTROL0 0xe00
-#define PCIE_REG_PHB_DEBUG_STATUS0 0xe08
-#define PCIE_REG_PHB_DEBUG_CONTROL1 0xe10
-#define PCIE_REG_PHB_DEBUG_STATUS1 0xe18
-#define PCIE_REG_PHB_DEBUG_CONTROL2 0xe20
-#define PCIE_REG_PHB_DEBUG_STATUS2 0xe28
-#define PCIE_REG_PHB_DEBUG_CONTROL3 0xe30
-#define PCIE_REG_PHB_DEBUG_STATUS3 0xe38
-#define PCIE_REG_PHB_DEBUG_CONTROL4 0xe40
-#define PCIE_REG_PHB_DEBUG_STATUS4 0xe48
-#define PCIE_REG_PHB_DEBUG_CONTROL5 0xe50
-#define PCIE_REG_PHB_DEBUG_STATUS5 0xe58
-#define PCIE_REG_PHB_DEBUG_CONTROL6 0xe60
-#define PCIE_REG_PHB_DEBUG_STATUS6 0xe68
-
-/* Definition for PCIe errors */
-struct wsp_pcie_err_log_data {
- __u64 phb_err;
- __u64 phb_err1;
- __u64 phb_log0;
- __u64 phb_log1;
- __u64 mmio_err;
- __u64 mmio_err1;
- __u64 mmio_log0;
- __u64 mmio_log1;
- __u64 dma_err;
- __u64 dma_err1;
- __u64 dma_log0;
- __u64 dma_log1;
- __u64 utl_sys_err;
- __u64 utl_port_err;
- __u64 utl_rc_err;
- __u64 unused;
-};
-
-#endif /* __WSP_PCI_H */
--
1.9.1
^ permalink raw reply related
* [git pull] Please pull powerpc.git merge branch
From: Benjamin Herrenschmidt @ 2014-06-02 0:27 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linuxppc-dev, Linux Kernel list
Hi Linus !
Here's just one trivial patch to wire up sys_renameat2 which I
seem to have completely missed so far. (My test build scripts fwd me
warnings but miss the ones generated for missing syscalls).
Cheers,
Ben.
The following changes since commit 011e4b02f1da156ac7fea28a9da878f3c23af739:
powerpc, kexec: Fix "Processor X is stuck" issue during kexec from ST mode (2014-05-28 13:24:26 +1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git merge
for you to fetch changes up to 8212f58a9b151d842fa60a70f354e43c61fad839:
powerpc: Wire renameat2() syscall (2014-06-02 09:24:27 +1000)
----------------------------------------------------------------
Benjamin Herrenschmidt (1):
powerpc: Wire renameat2() syscall
arch/powerpc/include/asm/systbl.h | 1 +
arch/powerpc/include/asm/unistd.h | 2 +-
arch/powerpc/include/uapi/asm/unistd.h | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
^ permalink raw reply
* [PATCHv7 2/6] ppc/cell: use get_unused_fd_flags(0) instead of get_unused_fd()
From: Yann Droneaud @ 2014-06-01 13:58 UTC (permalink / raw)
To: Jeremy Kerr, Arnd Bergmann, Benjamin Herrenschmidt,
Paul Mackerras
Cc: Yann Droneaud, cbe-oss-dev, trivial, linux-kernel, Al Viro,
Andrew Morton, linuxppc-dev
In-Reply-To: <cover.1401630396.git.ydroneaud@opteya.com>
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), function get_unused_fd_flags()
(or anon_inode_getfd()) should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that new code
start using get_unused_fd_flags() (or anon_inode_getfd()) with correct
flags.
This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.
The hard coded flag value (0) should be reviewed on a per-subsystem
basis, and, if possible, set to O_CLOEXEC.
Link: http://lkml.kernel.org/r/cover.1401630396.git.ydroneaud@opteya.com
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
---
arch/powerpc/platforms/cell/spufs/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 87ba7cf99cd7..51effcec30d8 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -301,7 +301,7 @@ static int spufs_context_open(struct path *path)
int ret;
struct file *filp;
- ret = get_unused_fd();
+ ret = get_unused_fd_flags(0);
if (ret < 0)
return ret;
@@ -518,7 +518,7 @@ static int spufs_gang_open(struct path *path)
int ret;
struct file *filp;
- ret = get_unused_fd();
+ ret = get_unused_fd_flags(0);
if (ret < 0)
return ret;
--
1.9.3
^ permalink raw reply related
* [PATCHv7 0/6] Getting rid of get_unused_fd() / enable close-on-exec
From: Yann Droneaud @ 2014-06-01 13:58 UTC (permalink / raw)
To: Tony Luck, Fenghua Yu, Al Viro, linux-ia64, Jeremy Kerr,
Arnd Bergmann, Benjamin Herrenschmidt, Paul Mackerras,
linuxppc-dev, cbe-oss-dev, linux-fsdevel, Richard Guy Briggs,
Eric Paris, Andrew Morton, trivial
Cc: Yann Droneaud, Ulrich Drepper, linux-kernel
TL;DR;
These are mostly obvious patches, easy to review, easy to apply:
you want them in the kernel. Now. And get_unused_fd() deserves to
die. Act today !
Hi,
Please find the seventh revision of my patchset to remove get_unused_fd()
macro in order to help subsystems to use get_unused_fd_flags() (or
anon_inode_getfd()) with flags either provided by the userspace or
set to O_CLOEXEC by default where appropriate.
Without get_unused_fd() macro, more subsystems are likely to use
get_unused_fd_flags() (or anon_inode_getfd()) and be taught to
provide an API that let userspace choose the opening flags
of the file descriptor.
Not allowing userspace to provide the "open" flags or not using O_CLOEXEC
by default should be considered bad practice from security point of view:
in most case O_CLOEXEC must be used to not leak file descriptor across
exec().
Not allowing userspace to atomically set close-on-exec flag and not using
O_CLOEXEC should be avoided to protect multi-threaded program
from race condition when it tried to set close-on-exec flag using
fcntl(fd, F_SETFD, FD_CLOEXEC) after opening the file descriptor.
Example:
int fd;
int ret;
fd = open(filename, O_RDONLY);
if (fd < 0) {
perror("open");
return -1;
}
/*
* window opened for another thread to call fork(),
* then the new process can call exec() at any time
* and the file descriptor would be inherited
*/
ret = fcntl(fd, F_SETFD, FD_CLOEXEC)
if (ret < 0) {
perror("fnctl()");
close(fd);
return -1;
}
vs.:
int fd;
fd = open(filaneme, O_RDONLY | O_CLOEXEC);
if (fd < 0) {
perror("open");
return -1;
}
Using O_CLOEXEC by default when flags are not (eg. cannot be) provided
by userspace is the safest bet as it allows userspace to choose, if, when
and where the file descriptor is going to be inherited across exec():
userspace is free to call fcntl() to remove FD_CLOEXEC flag in the child
process that will call exec().
Unfortunately, O_CLOEXEC cannot be made the default for most existing system
calls as it's not the default behavior for POSIX / Unix. Reader interested
in this issue could have a look at "Ghosts of Unix past, part 2: Conflated
designs" [1] article by Neil Brown.
FAQ:
- Why do one want close-on-exec ?
Setting close-on-exec flag on file descriptor ensure it won't be inherited
silently by child, child of child, etc. when executing another program.
If the file descriptor is not closed, some kernel resources can be locked
until the last process with the opened file descriptor exit.
If the file descriptor is not closed, this can lead to a security issue,
eg. making resources available to a less privileged program allowing
information leak and/or deny of service.
- Why do one need atomic close-on-exec ?
Even if it's possible to set close-on-exec flag through call to fcntl()
as shown previously, it introduces a race condition in multi-threaded
process, where a thread call fork() / exec() while another thread
is between call to open() and fcntl().
Additionally, using close-on-exec free the programmer from tracking manually
which file descriptor is to close in a child before calling exec():
in a program using multiple third-party libraries, it's difficult to know
which file descriptor must be closed.
AFAIK, while there's a atexit(), pthread_atfork(), there's no atexec()
userspace function in libc to allow libraries to register a handler in
order to close its opened file descriptor before exec().
- Why default to close-on-exec ?
Some kernel interfaces don't allow userspace to pass a O_CLOEXEC-like
flag when creating a new file descriptor.
In such cases, if possible (see below), O_CLOEXEC must be made
the default so that userspace doesn't have to call fcntl()
which, as demonstrated previously, is open to race condition in
multi-threaded program.
- How to choose between flag 0 or O_CLOEXEC in call to
get_unused_fd_flags() (or anon_inode_getfd()) ?
Short: Will it break existing application ? Will it break kernel ABI ?
If answer is no, use O_CLOEXEC.
If answer is yes, use 0.
Long: If userspace expect to retrieve a file descriptor with plain
old Unix(tm) semantics, O_CLOEXEC must not be the default, as it
could break some applications expecting that the file descriptor
will be inherited across exec().
But for some subsystems, such as InfiniBand, KVM, VFIO, it makes
no sense to have file descriptors inherited across exec() since
those are tied to resources that will vanish when a another program
will replace the current one by mean of exec(), so it's safe to use
O_CLOEXEC in such cases.
For others, like XFS, the file descriptor is retrieved by one
program and will be used by a different program, executed as a
child. In this case, setting O_CLOEXEC would break existing
application which do not expect to have to call fcntl(fd,
F_SETFD, 0) to make it available across exec().
If file descriptor created by a subsystem is not tied to the
current process resources, it's likely legal to use it in a
different process context, thus O_CLOEXEC must not be the default.
If one, as a subsystem maintainer, cannot tell for sure that
no userspace program ever rely current behavior, eg. file descriptor
being inherited across exec(), then the default flag *must*
be kept 0 to not break application.
- This subsystem cannot be turned to use O_CLOEXEC by default:
If O_CLOEXEC cannot be made the default, it would be interesting
to think to extend the API to have a (set of) function(s) taking
a flag parameter so that userspace can atomically request close-on-exec
if it need it (and it should need it).
- Background:
One might want to read "Secure File Descriptor Handling" [2] by
Ulrich Drepper who is responsible of adding O_CLOEXEC flag on open(),
and flags alike on other syscalls.
One might also want to read PEP-446 "Make newly created file descriptors
non-inheritable" [3] by Victor Stinner since it has lot more background
information on file descriptor leaking.
One also like to read "Excuse me son, but your code is leaking !!!" [4]
by Dan Walsh for advice.
[1] http://lwn.net/Articles/412131/
[2] http://udrepper.livejournal.com/20407.html
[3] http://www.python.org/dev/peps/pep-0446/
[4] http://danwalsh.livejournal.com/53603.html
- Statistics:
In linux-next tag next-20140530, they're currently:
- 32 calls to fd_install()
with one call part of anon_inode_getfd()
- 25 calls to get_unused_fd_flags()
with one call part of anon_inode_getfd()
with another part of get_unused_fd() macro
- 11 calls to anon_inode_getfd()
- 9 calls to anon_inode_getfile()
with one call part of anon_inode_getfd()
- 6 calls to get_unused_fd()
Changes from patchset v6 [PATCHSETv6]
- Rebased on top of latest -next
- Added Cc: trivial@kernel.org for the first trivials
patches.
Changes from patchset v5 [PATCHSETv5]
- perf: introduce a flag to enable close-on-exec in perf_event_open()
DROPPED: applied upstream, commit a21b0b354d4a.
Changes from patchset v4 [PATCHSETv4]:
- rewrote cover letter following discussion with perf maintainer.
Thanks to Peter Zijlstra.
- modified a bit some commit messages.
- events: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: replaced by following patch.
- perf: introduce a flag to enable close-on-exec in perf_event_open()
NEW: instead of hard coding the flags to 0, this patch
allows userspace to specify close-on-exec flag.
- fanotify: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: replaced by following patch.
- fanotify: enable close-on-exec on events' fd when requested in
fanotify_init()
NEW: instead of hard coding the flags to 0, this patch
enable close-on-exec if userspace request it.
Changes from patchset v3 [PATCHSETv3]:
- industrialio: use anon_inode_getfd() with O_CLOEXEC flag
DROPPED: applied upstream, commit a646fbf0fd11.
Changes from patchset v2 [PATCHSETv2]:
- android/sw_sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
DROPPED: applied upstream, commit 45acea57335e.
- android/sync: use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
DROPPED: applied upstream, commit 9c6cd3b39048.
- vfio: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: applied upstream, commit a5d550703d2c.
Additionally subsystem maintainer applied another patch on top
to set the flags to O_CLOEXEC, commit 5d042fbdbb2d.
- industrialio: use anon_inode_getfd() with O_CLOEXEC flag
NEW: propose to use O_CLOEXEC as default flag.
Changes from patchset v1 [PATCHSETv1]:
- explicitly added subsystem maintainers as mail recepients.
- infiniband: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: subsystem maintainer applied another patch
using get_unused_fd_flags(O_CLOEXEC) as suggested,
commit da183c7af844.
- android/sw_sync: use get_unused_fd_flags(0) instead of get_unused_fd()
MODIFIED: use get_unused_fd_flags(O_CLOEXEC) as suggested.
- android/sync: use get_unused_fd_flags(0) instead of get_unused_fd()
MODIFIED: use get_unused_fd_flags(O_CLOEXEC) as suggested.
- xfs: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: applied asis by subsystem maintainer, commit 862a62937e76.
- sctp: use get_unused_fd_flags(0) instead of get_unused_fd()
DROPPED: applied asis by subsystem maintainer, commit 8a59bd3e9b29.
Links:
[PATCHSETv6]
http://lkml.kernel.org/r/cover.1394532336.git.ydroneaud@opteya.com
[PATCHSETv5]
http://lkml.kernel.org/r/cover.1388952061.git.ydroneaud@opteya.com
[PATCHSETv4]
http://lkml.kernel.org/r/cover.1383121137.git.ydroneaud@opteya.com
[PATCHSETv3]
http://lkml.kernel.org/r/cover.1378460926.git.ydroneaud@opteya.com
[PATCHSETv2]
http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com
[PATCHSETv1]
http://lkml.kernel.org/r/cover.1372777600.git.ydroneaud@opteya.com
Yann Droneaud (6):
ia64: use get_unused_fd_flags(0) instead of get_unused_fd()
ppc/cell: use get_unused_fd_flags(0) instead of get_unused_fd()
binfmt_misc: use get_unused_fd_flags(0) instead of get_unused_fd()
file: use get_unused_fd_flags(0) instead of get_unused_fd()
fanotify: enable close-on-exec on events' fd when requested in
fanotify_init()
file: remove macro get_unused_fd()
arch/ia64/kernel/perfmon.c | 2 +-
arch/powerpc/platforms/cell/spufs/inode.c | 4 ++--
fs/binfmt_misc.c | 2 +-
fs/file.c | 2 +-
fs/notify/fanotify/fanotify_user.c | 2 +-
include/linux/file.h | 1 -
6 files changed, 6 insertions(+), 7 deletions(-)
--
1.9.3
^ permalink raw reply
* Re: [PATCH] powerpc, xmon: Enable hardware instruction breakpoint support on POWER8
From: Michael Neuling @ 2014-06-01 6:18 UTC (permalink / raw)
To: Anshuman Khandual; +Cc: linuxppc-dev
In-Reply-To: <1401451823-25547-1-git-send-email-khandual@linux.vnet.ibm.com>
On Fri, 2014-05-30 at 17:40 +0530, Anshuman Khandual wrote:
> This patch enables support for hardware instruction breakpoints on POWER8=
with
> the help of a new register called CIABR (Completed Instruction Address Br=
eakpoint
> Register). With this patch, single hardware instruction breakpoint can be=
added
> and cleared during any active xmon debug session. This hardware based ins=
truction
> breakpoint mechanism works correctly along with the existing TRAP based i=
nstruction
> breakpoints available on xmon. Example usage as follows.
Have you actually tried this on a guest?
Please also compile with a range of configs. It doesn't compile with
ppc64e_defconfig.
In file included from /scratch/mikey/src/linux-ozlabs/arch/powerpc/xmon/xmo=
n.c:51:0:
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h: =
In function 'get_cede_latency_hint':
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h:2=
6:9: error: 'struct paca_struct' has no member named 'lppaca_ptr'
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h: =
In function 'set_cede_latency_hint':
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h:3=
1:2: error: 'struct paca_struct' has no member named 'lppaca_ptr'
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h: =
In function 'plpar_page_set_loaned':
/scratch/mikey/src/linux-ozlabs/arch/powerpc/include/asm/plpar_wrappers.h:9=
8:2: error: implicit declaration of function 'cmo_get_page_size' [-Werror=
=3Dimplicit-function-declaration]
cc1: all warnings being treated as errors
> - (bp->enabled & BP_IABR)? "inst": "trap");
> + (bp->enabled & (BP_IABR | BP_CIABR))?
> + "inst": "trap");
Git complains about whitespace issues here. Spaces before tabs.
Mikey
^ permalink raw reply
* Kernel 3.15: Boot problems with a PA6T board
From: Christian Zigotzky @ 2014-05-31 22:33 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev
In-Reply-To: <5389B686.7070305@xenosoft.de>
On 31.05.2014 13:01, Christian Zigotzky wrote:
> On 31.05.2014 12:28, Christian Zigotzky wrote:
>> On 29.05.2014 04:48, Michael Ellerman wrote:
>>> On Wed, 2014-05-28 at 13:25 +0200, Christian Zigotzky wrote:
>>>> On 28.05.2014 10:53, Christian Zigotzky wrote:
>>>>> Hi Michael,
>>>>>
>>>>> Thank you for your answer and thank you for your help. :-)
>>>>>
>>>>> On 28.05.2014 06:23, Michael Ellerman wrote:
>>>>>> On Wed, 2014-05-28 at 01:08 +0200, Christian Zigotzky wrote:
>>>>>>
>>>>>> I'm going to guess that cd427485357c0c4b99f69719251baacf25946e11 is
>>>>>> BAD. Can
>>>>>> you please confirm or deny that?
>>>>> It's not BAD. It boots.
>>> Hmm, interesting.
>>>
>>>>>> If cd42748 is *good*, then you'll need to do a bigger bisect from
>>>>>> d8ff9cd to
>>>>>> 18a1a7a.
>>>> OK :-)
>>>>
>>>> -> git clone
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>>> linux2-git
>>>> -> git bisect start
>>>> -> git bisect good d8ff9cdf68fd119d491f3de90e1a612afc2f3b2b
>>>> -> git bisect bad 18a1a7a1d862ae0794a0179473d08a414dd49234
>>>>
>>>> Output:
>>>> Bisecting: 5900 revisions left to test after this (roughly 13 steps)
>>>> [cb1595563880a81dab6eab9a5ecb4520d2e76077] Merge tag 'tty-3.15-rc1' of
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
>>>>
>>>> Unfortunately it doesn't boot. :-(
>>> OK. So you do:
>>>
>>> $ git bisect bad
>>>
>>> And it will pick a new commit for you to test. Repeat that ~13 times
>>> and you
>>> should have identified the bad commit.
>> OK :-)
>>
>> git bisect bad
>> Bisecting: 2902 revisions left to test after this (roughly 12 steps)
>> [b22f136071b1a797e96b3ee6fb0dc32625bd152e] staging: rtl8821ae: Fix
>> quoted string split across lines <- Kernel boots :-)
>>
>> What shall I do next?
> OK, I know it: git bisect good
>
> -- Christian
>
git bisect good
Bisecting: 1494 revisions left to test after this (roughly 11 steps)
[3786075b5ebc8c4eaefd9e3ebf72883934fb64b3] Merge tag 'regulator-v3.15'
of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator <-
Kernel boots
git bisect good
Bisecting: 797 revisions left to test after this (roughly 10 steps)
[69dd89fd2b9406603d218cab8996cfb232d5b8b9] Merge tag 'asoc-v3.15-4' of
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into
for-linus <- Kernel boots
git bisect good
Bisecting: 372 revisions left to test after this (roughly 9 steps)
[4b1779c2cf030c68aefe939d946475e4136c1895] Merge tag 'pci-v3.15-changes'
of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci <- Doesn't boot
git bisect bad
Bisecting: 212 revisions left to test after this (roughly 8 steps)
[45b15d98a96ffdb3c608bdad952f51930c151420] Merge remote-tracking
branches 'spi/topic/xilinx' and 'spi/topic/xtfpga' into spi-next <-
Kernel boots
git bisect good
Bisecting: 118 revisions left to test after this (roughly 7 steps)
[91b4adc983d8e9975bc677c2b8395631edf7b92d] Merge branch 'pci/misc' into
next <- Kernel boots
git bisect good
Bisecting: 41 revisions left to test after this (roughly 6 steps)
[26f31fb936042459d481557a83bda7a3f4d61906] Merge tag 'hwmon-for-linus'
of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging <-
Kernel boots
git bisect good
Bisecting: 20 revisions left to test after this (roughly 4 steps)
[e20fa6609a0076def469aeb799b1c25558e70042] PCI: Don't check
resource_size() in pci_bus_alloc_resource() <- Doesn't boot
git bisect bad
Bisecting: 10 revisions left to test after this (roughly 3 steps)
[cd8a4d3657c3f2cf9ce3780707be1debb8fea6e2] PCI: Check IORESOURCE_UNSET
before updating BAR <- Doesn't boot
git bisect bad
Bisecting: 4 revisions left to test after this (roughly 2 steps)
[5edb93b89f6cc3089ee283656555e7a9ad36a8a0] resource: Add
resource_contains() <- Kernel boots
git bisect good
Bisecting: 2 revisions left to test after this (roughly 1 step)
[f44116ae881868ab72274df1eff48fdbde9898af] PCI: Remove
pci_find_parent_resource() use for allocation <- Doesn't boot
git bisect bad
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[d19cb803a2ff85d1b64b9628e1aec2aa76a9260b] vsprintf: Add support for
IORESOURCE_UNSET in %pR <- Kernel boots
git bisect good
f44116ae881868ab72274df1eff48fdbde9898af is the first bad commit
commit f44116ae881868ab72274df1eff48fdbde9898af
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Feb 26 11:25:58 2014 -0700
PCI: Remove pci_find_parent_resource() use for allocation
If the resource hasn't been allocated yet,
pci_find_parent_resource() is
documented as returning the region "where it should be allocated from."
This is impossible in general because there may be several
candidates: a
prefetchable BAR can be put in either a prefetchable or
non-prefetchable
window, a transparent bridge may have overlapping positively- and
subtractively-decoded windows, and a root bus may have several
windows of
the same type.
Allocation should be done by pci_bus_alloc_resource(), which iterates
through all bus resources and looks for the best match, e.g., one
with the
desired prefetchability attributes, and falls back to less-desired
possibilities.
The only valid use of pci_find_parent_resource() is to find the
parent of
an already-allocated resource so we can claim it via
request_resource(),
and all we need for that is a bus region of the correct type that
contains
the resource.
Note that like 8c8def26bfaa ("PCI: allow matching of prefetchable
resources
to non-prefetchable windows"), this depends on
pci_bus_for_each_resource()
iterating through positively-decoded regions before
subtractively-decoded
ones. We prefer not to return a subtractively-decoded region because
requesting from it will likely conflict with the overlapping
positively-
decoded window (see Launchpad report below).
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/424142
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Linus Torvalds <torvalds@linux-foundation.org>
:040000 040000 d9f2e04d3a635126a3c42406400b156aea3d2e30
43278454117307fa7e155fb241b16b1863ea45d0 M drivers
^ permalink raw reply
* Re: [PATCH 2/2] gpio: gpiolib: set gpiochip_remove retval to void
From: Dan Carpenter @ 2014-05-31 12:19 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Linux MIPS Mailing List, David Daney, Linux-sh list, Greg KH,
Linus Walleij, platform-driver-x86, linux-leds@vger.kernel.org,
driverdevel, Alexandre Courbot, patches, linux-samsungsoc,
Geert Uytterhoeven, linux-input@vger.kernel.org,
Linux Media Mailing List, spear-devel, linux-gpio@vger.kernel.org,
m, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-wireless, linux-kernel@vger.kernel.org, abdoulaye berthe,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <5389864B.4000107@metafoo.de>
On Sat, May 31, 2014 at 09:35:39AM +0200, Lars-Peter Clausen wrote:
> On 05/31/2014 01:29 AM, Greg KH wrote:
> >On Fri, May 30, 2014 at 08:16:59PM +0200, Lars-Peter Clausen wrote:
> >>On 05/30/2014 07:33 PM, David Daney wrote:
> >>>On 05/30/2014 04:39 AM, Geert Uytterhoeven wrote:
> >>>>On Fri, May 30, 2014 at 1:30 PM, abdoulaye berthe <berthe.ab@gmail.com>
> >>>>wrote:
> >>>>>--- a/drivers/gpio/gpiolib.c
> >>>>>+++ b/drivers/gpio/gpiolib.c
> >>>>>@@ -1263,10 +1263,9 @@ static void gpiochip_irqchip_remove(struct
> >>>>>gpio_chip *gpiochip);
> >>>>> *
> >>>>> * A gpio_chip with any GPIOs still requested may not be removed.
> >>>>> */
> >>>>>-int gpiochip_remove(struct gpio_chip *chip)
> >>>>>+void gpiochip_remove(struct gpio_chip *chip)
> >>>>> {
> >>>>> unsigned long flags;
> >>>>>- int status = 0;
> >>>>> unsigned id;
> >>>>>
> >>>>> acpi_gpiochip_remove(chip);
> >>>>>@@ -1278,24 +1277,15 @@ int gpiochip_remove(struct gpio_chip *chip)
> >>>>> of_gpiochip_remove(chip);
> >>>>>
> >>>>> for (id = 0; id < chip->ngpio; id++) {
> >>>>>- if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
> >>>>>- status = -EBUSY;
> >>>>>- break;
> >>>>>- }
> >>>>>- }
> >>>>>- if (status == 0) {
> >>>>>- for (id = 0; id < chip->ngpio; id++)
> >>>>>- chip->desc[id].chip = NULL;
> >>>>>-
> >>>>>- list_del(&chip->list);
> >>>>>+ if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
> >>>>>+ panic("gpio: removing gpiochip with gpios still
> >>>>>requested\n");
> >>>>
> >>>>panic?
> >>>
> >>>NACK to the patch for this reason. The strongest thing you should do here
> >>>is WARN.
> >>>
> >>>That said, I am not sure why we need this whole patch set in the first place.
> >>
> >>Well, what currently happens when you remove a device that is a provider of
> >>a gpio_chip which is still in use, is that the kernel crashes. Probably with
> >>a rather cryptic error message. So this patch doesn't really change the
> >>behavior, but makes it more explicit what is actually wrong. And even if you
> >>replace the panic() by a WARN() it will again just crash slightly later.
> >>
> >>This is a design flaw in the GPIO subsystem that needs to be fixed.
> >
> >Then fix the GPIO code properly, don't add a new panic() to the kernel.
>
> Until somebody comes up with a patch that fixes this for good I
> think that patch is still an improvement over the current situation.
> Rather than keeping the kernel running in a inconsistent state,
> which might cause all kinds of undefined behavior and which will
> lead to a crash eventually, we might as well just crash the kernel
> at the cause of the inconsistent state. This will make it obvious
> why it crashed (compared to a random stacktrace) and will also
> prevent the kernel from running in a undefined state.
>
Really, adding a panic here is not ok. With a WARN() then you have
time to save the dmesg to a file.
This CC list is way too huge. We're all wondering how often this stuff
crashes anyway? Have you tried to fix the bug instead of just calling
panic()? Is there a bugzilla entry or something? Is there a thread on
the list?
Just add a WARN() and fix the bug then cleanup the error handling.
regards,
dan carpenter
^ permalink raw reply
* Kernel 3.15: Boot problems with a PA6T board
From: Christian Zigotzky @ 2014-05-31 11:01 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev
In-Reply-To: <5389AEB6.4030500@xenosoft.de>
On 31.05.2014 12:28, Christian Zigotzky wrote:
> On 29.05.2014 04:48, Michael Ellerman wrote:
>> On Wed, 2014-05-28 at 13:25 +0200, Christian Zigotzky wrote:
>>> On 28.05.2014 10:53, Christian Zigotzky wrote:
>>>> Hi Michael,
>>>>
>>>> Thank you for your answer and thank you for your help. :-)
>>>>
>>>> On 28.05.2014 06:23, Michael Ellerman wrote:
>>>>> On Wed, 2014-05-28 at 01:08 +0200, Christian Zigotzky wrote:
>>>>>
>>>>> I'm going to guess that cd427485357c0c4b99f69719251baacf25946e11 is
>>>>> BAD. Can
>>>>> you please confirm or deny that?
>>>> It's not BAD. It boots.
>> Hmm, interesting.
>>
>>>>> If cd42748 is *good*, then you'll need to do a bigger bisect from
>>>>> d8ff9cd to
>>>>> 18a1a7a.
>>> OK :-)
>>>
>>> -> git clone
>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>> linux2-git
>>> -> git bisect start
>>> -> git bisect good d8ff9cdf68fd119d491f3de90e1a612afc2f3b2b
>>> -> git bisect bad 18a1a7a1d862ae0794a0179473d08a414dd49234
>>>
>>> Output:
>>> Bisecting: 5900 revisions left to test after this (roughly 13 steps)
>>> [cb1595563880a81dab6eab9a5ecb4520d2e76077] Merge tag 'tty-3.15-rc1' of
>>> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
>>>
>>> Unfortunately it doesn't boot. :-(
>> OK. So you do:
>>
>> $ git bisect bad
>>
>> And it will pick a new commit for you to test. Repeat that ~13 times
>> and you
>> should have identified the bad commit.
> OK :-)
>
> git bisect bad
> Bisecting: 2902 revisions left to test after this (roughly 12 steps)
> [b22f136071b1a797e96b3ee6fb0dc32625bd152e] staging: rtl8821ae: Fix
> quoted string split across lines <- Kernel boots :-)
>
> What shall I do next?
OK, I know it: git bisect good
-- Christian
^ permalink raw reply
* Kernel 3.15: Boot problems with a PA6T board
From: Christian Zigotzky @ 2014-05-31 10:28 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev
In-Reply-To: <1401331711.4930.7.camel@concordia>
On 29.05.2014 04:48, Michael Ellerman wrote:
> On Wed, 2014-05-28 at 13:25 +0200, Christian Zigotzky wrote:
>> On 28.05.2014 10:53, Christian Zigotzky wrote:
>>> Hi Michael,
>>>
>>> Thank you for your answer and thank you for your help. :-)
>>>
>>> On 28.05.2014 06:23, Michael Ellerman wrote:
>>>> On Wed, 2014-05-28 at 01:08 +0200, Christian Zigotzky wrote:
>>>>
>>>> I'm going to guess that cd427485357c0c4b99f69719251baacf25946e11 is
>>>> BAD. Can
>>>> you please confirm or deny that?
>>> It's not BAD. It boots.
> Hmm, interesting.
>
>>>> If cd42748 is *good*, then you'll need to do a bigger bisect from
>>>> d8ff9cd to
>>>> 18a1a7a.
>> OK :-)
>>
>> -> git clone
>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux2-git
>> -> git bisect start
>> -> git bisect good d8ff9cdf68fd119d491f3de90e1a612afc2f3b2b
>> -> git bisect bad 18a1a7a1d862ae0794a0179473d08a414dd49234
>>
>> Output:
>> Bisecting: 5900 revisions left to test after this (roughly 13 steps)
>> [cb1595563880a81dab6eab9a5ecb4520d2e76077] Merge tag 'tty-3.15-rc1' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
>>
>> Unfortunately it doesn't boot. :-(
> OK. So you do:
>
> $ git bisect bad
>
> And it will pick a new commit for you to test. Repeat that ~13 times and you
> should have identified the bad commit.
OK :-)
git bisect bad
Bisecting: 2902 revisions left to test after this (roughly 12 steps)
[b22f136071b1a797e96b3ee6fb0dc32625bd152e] staging: rtl8821ae: Fix
quoted string split across lines <- Kernel boots :-)
What shall I do next?
Cheers,
Christian
^ permalink raw reply
* Re: [PATCH 2/2] gpio: gpiolib: set gpiochip_remove retval to void
From: Lars-Peter Clausen @ 2014-05-31 7:35 UTC (permalink / raw)
To: Greg KH
Cc: Linux MIPS Mailing List, David Daney, Linux-sh list,
Linus Walleij, platform-driver-x86, linux-leds@vger.kernel.org,
driverdevel, Alexandre Courbot, patches, linux-samsungsoc,
Geert Uytterhoeven, linux-input@vger.kernel.org, abdoulaye berthe,
spear-devel, linux-gpio@vger.kernel.org, m,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-wireless, linux-kernel@vger.kernel.org,
Linux Media Mailing List, linuxppc-dev@lists.ozlabs.org
In-Reply-To: <20140530232922.GD25854@kroah.com>
On 05/31/2014 01:29 AM, Greg KH wrote:
> On Fri, May 30, 2014 at 08:16:59PM +0200, Lars-Peter Clausen wrote:
>> On 05/30/2014 07:33 PM, David Daney wrote:
>>> On 05/30/2014 04:39 AM, Geert Uytterhoeven wrote:
>>>> On Fri, May 30, 2014 at 1:30 PM, abdoulaye berthe <berthe.ab@gmail.com>
>>>> wrote:
>>>>> --- a/drivers/gpio/gpiolib.c
>>>>> +++ b/drivers/gpio/gpiolib.c
>>>>> @@ -1263,10 +1263,9 @@ static void gpiochip_irqchip_remove(struct
>>>>> gpio_chip *gpiochip);
>>>>> *
>>>>> * A gpio_chip with any GPIOs still requested may not be removed.
>>>>> */
>>>>> -int gpiochip_remove(struct gpio_chip *chip)
>>>>> +void gpiochip_remove(struct gpio_chip *chip)
>>>>> {
>>>>> unsigned long flags;
>>>>> - int status = 0;
>>>>> unsigned id;
>>>>>
>>>>> acpi_gpiochip_remove(chip);
>>>>> @@ -1278,24 +1277,15 @@ int gpiochip_remove(struct gpio_chip *chip)
>>>>> of_gpiochip_remove(chip);
>>>>>
>>>>> for (id = 0; id < chip->ngpio; id++) {
>>>>> - if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
>>>>> - status = -EBUSY;
>>>>> - break;
>>>>> - }
>>>>> - }
>>>>> - if (status == 0) {
>>>>> - for (id = 0; id < chip->ngpio; id++)
>>>>> - chip->desc[id].chip = NULL;
>>>>> -
>>>>> - list_del(&chip->list);
>>>>> + if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
>>>>> + panic("gpio: removing gpiochip with gpios still
>>>>> requested\n");
>>>>
>>>> panic?
>>>
>>> NACK to the patch for this reason. The strongest thing you should do here
>>> is WARN.
>>>
>>> That said, I am not sure why we need this whole patch set in the first place.
>>
>> Well, what currently happens when you remove a device that is a provider of
>> a gpio_chip which is still in use, is that the kernel crashes. Probably with
>> a rather cryptic error message. So this patch doesn't really change the
>> behavior, but makes it more explicit what is actually wrong. And even if you
>> replace the panic() by a WARN() it will again just crash slightly later.
>>
>> This is a design flaw in the GPIO subsystem that needs to be fixed.
>
> Then fix the GPIO code properly, don't add a new panic() to the kernel.
Until somebody comes up with a patch that fixes this for good I think that
patch is still an improvement over the current situation. Rather than
keeping the kernel running in a inconsistent state, which might cause all
kinds of undefined behavior and which will lead to a crash eventually, we
might as well just crash the kernel at the cause of the inconsistent state.
This will make it obvious why it crashed (compared to a random stacktrace)
and will also prevent the kernel from running in a undefined state.
- Lars
^ permalink raw reply
* Re: [PATCH 2/2] gpio: gpiolib: set gpiochip_remove retval to void
From: Greg KH @ 2014-05-30 23:29 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Linux MIPS Mailing List, David Daney, Linux-sh list,
Linus Walleij, platform-driver-x86, linux-leds@vger.kernel.org,
driverdevel, Alexandre Courbot, patches, linux-samsungsoc,
Geert Uytterhoeven, linux-input@vger.kernel.org, abdoulaye berthe,
spear-devel, linux-gpio@vger.kernel.org, m,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-wireless, linux-kernel@vger.kernel.org,
Linux Media Mailing List, linuxppc-dev@lists.ozlabs.org
In-Reply-To: <5388CB1B.3090802@metafoo.de>
On Fri, May 30, 2014 at 08:16:59PM +0200, Lars-Peter Clausen wrote:
> On 05/30/2014 07:33 PM, David Daney wrote:
> >On 05/30/2014 04:39 AM, Geert Uytterhoeven wrote:
> >>On Fri, May 30, 2014 at 1:30 PM, abdoulaye berthe <berthe.ab@gmail.com>
> >>wrote:
> >>>--- a/drivers/gpio/gpiolib.c
> >>>+++ b/drivers/gpio/gpiolib.c
> >>>@@ -1263,10 +1263,9 @@ static void gpiochip_irqchip_remove(struct
> >>>gpio_chip *gpiochip);
> >>> *
> >>> * A gpio_chip with any GPIOs still requested may not be removed.
> >>> */
> >>>-int gpiochip_remove(struct gpio_chip *chip)
> >>>+void gpiochip_remove(struct gpio_chip *chip)
> >>> {
> >>> unsigned long flags;
> >>>- int status = 0;
> >>> unsigned id;
> >>>
> >>> acpi_gpiochip_remove(chip);
> >>>@@ -1278,24 +1277,15 @@ int gpiochip_remove(struct gpio_chip *chip)
> >>> of_gpiochip_remove(chip);
> >>>
> >>> for (id = 0; id < chip->ngpio; id++) {
> >>>- if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
> >>>- status = -EBUSY;
> >>>- break;
> >>>- }
> >>>- }
> >>>- if (status == 0) {
> >>>- for (id = 0; id < chip->ngpio; id++)
> >>>- chip->desc[id].chip = NULL;
> >>>-
> >>>- list_del(&chip->list);
> >>>+ if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
> >>>+ panic("gpio: removing gpiochip with gpios still
> >>>requested\n");
> >>
> >>panic?
> >
> >NACK to the patch for this reason. The strongest thing you should do here
> >is WARN.
> >
> >That said, I am not sure why we need this whole patch set in the first place.
>
> Well, what currently happens when you remove a device that is a provider of
> a gpio_chip which is still in use, is that the kernel crashes. Probably with
> a rather cryptic error message. So this patch doesn't really change the
> behavior, but makes it more explicit what is actually wrong. And even if you
> replace the panic() by a WARN() it will again just crash slightly later.
>
> This is a design flaw in the GPIO subsystem that needs to be fixed.
Then fix the GPIO code properly, don't add a new panic() to the kernel.
greg k-h
^ permalink raw reply
* [PATCH] MAINTAINERS: Update Linux for Freescale PowerPC
From: Scott Wood @ 2014-05-30 23:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Scott Wood
About a year ago I began taking patches, technically as Kumar's
assistant -- but since then all of the pull requests for this area have
come from me, and I've been doing most of the reviews. Update
MAINTAINERS to reflect this.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 049214e..5509f3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5341,9 +5341,11 @@ S: Maintained
F: arch/powerpc/platforms/8xx/
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
+M: Scott Wood <scottwood@freescale.com>
M: Kumar Gala <galak@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
S: Maintained
F: arch/powerpc/platforms/83xx/
F: arch/powerpc/platforms/85xx/
--
1.9.1
^ permalink raw reply related
* [PATCH v2] powerpc/booke64: wrap tlb lock and search in htw miss with FTR_SMT
From: Scott Wood @ 2014-05-30 22:45 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Scott Wood, Laurentiu Tudor
From: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Virtualized environments may expose a e6500 dual-threaded core
as two single-threaded e6500 cores. Take advantage of this
and get rid of the tlb lock and the trap-causing tlbsx in
the htw miss handler by guarding with CPU_FTR_SMT, as it's
already being done in the bolted tlb1 miss handler.
As seen in the results below, measurements done with lmbench
random memory access latency test running under Freescale's
Embedded Hypervisor, there is a ~34% improvement.
Memory latencies in nanoseconds - smaller is better
(WARNING - may not be correct, check graphs)
----------------------------------------------------
Host Mhz L1 $ L2 $ Main mem Rand mem
--------- --- ---- ---- -------- --------
smt 1665 1.8020 13.2 83.0 1149.7
nosmt 1665 1.8020 13.2 83.0 758.1
Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
[scottwood@freescale.com: commit message tweak]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
v2:
- s/expose/may expose/ in commit message
- rebased onto my patch queue to resolve conflict
- resent since the original didn't make it to the list archives
or patchwork.
arch/powerpc/mm/tlb_low_64e.S | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 131f1f4..57c4d66 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -299,6 +299,7 @@ itlb_miss_fault_bolted:
* r10 = crap (free to use)
*/
tlb_miss_common_e6500:
+BEGIN_FTR_SECTION
/*
* Search if we already have an indirect entry for that virtual
* address, and if we do, bail out.
@@ -333,6 +334,7 @@ tlb_miss_common_e6500:
andis. r10,r10,MAS1_VALID@h
bne tlb_miss_done_e6500
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
/* Now, we need to walk the page tables. First check if we are in
* range.
@@ -393,11 +395,13 @@ tlb_miss_common_e6500:
tlb_miss_done_e6500:
.macro tlb_unlock_e6500
+BEGIN_FTR_SECTION
beq cr1,1f /* no unlock if lock was recursively grabbed */
li r15,0
isync
stb r15,0(r11)
1:
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
.endm
tlb_unlock_e6500
--
1.9.1
^ permalink raw reply related
* Patch not showing up in patchwork (was Re: [PATCH] powerpc/booke64: wrap tlb lock and search in htw miss with FTR_SMT)
From: Scott Wood @ 2014-05-30 22:39 UTC (permalink / raw)
To: Laurentiu Tudor; +Cc: linuxppc-dev
In-Reply-To: <1401461955-18007-1-git-send-email-Laurentiu.Tudor@freescale.com>
On Fri, 2014-05-30 at 17:59 +0300, Laurentiu Tudor wrote:
> Virtualized environments expose a e6500 dual-threaded core
> as two single-threaded e6500 cores. Take advantage of this
> and get rid of the tlb lock and the trap-causing tlbsx in
> the htw miss handler by guarding with CPU_FTR_SMT, as it's
> already being done in the bolted tlb1 miss handler.
>
> As seen in the results below, measurements done with lmbench
> random memory access latency test running under Freescale's
> Embedded Hypervisor, there is a ~34% improvement.
>
> Memory latencies in nanoseconds - smaller is better
> (WARNING - may not be correct, check graphs)
> ----------------------------------------------------
> Host Mhz L1 $ L2 $ Main mem Rand mem
> --------- --- ---- ---- -------- --------
> smt 1665 1.8020 13.2 83.0 1149.7
> nosmt 1665 1.8020 13.2 83.0 758.1
>
> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
> Cc: Scott Wood <scottwood@freescale.com>
> ---
> arch/powerpc/mm/tlb_low_64e.S | 4 ++++
> 1 file changed, 4 insertions(+)
Any idea why this patch isn't showing up on the mailing list? I see my
reply in the archives, but not the original patch.
-Scott
^ permalink raw reply
* [RESEND PATCH] memory: Freescale CoreNet Coherency Fabric error reporting driver
From: Scott Wood @ 2014-05-30 22:27 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linuxppc-dev, linux-kernel
The CoreNet Coherency Fabric is part of the memory subsystem on
some Freescale QorIQ chips. It can report coherency violations (e.g.
due to misusing memory that is mapped noncoherent) as well as
transactions that do not hit any local access window, or which hit a
local access window with an invalid target ID.
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
Resending to the proper list addresses -- sorry for the duplicate.
arch/powerpc/configs/corenet32_smp_defconfig | 1 +
arch/powerpc/configs/corenet64_smp_defconfig | 1 +
drivers/memory/Kconfig | 10 ++
drivers/memory/Makefile | 1 +
drivers/memory/fsl-corenet-cf.c | 246 +++++++++++++++++++++++++++
5 files changed, 259 insertions(+)
create mode 100644 drivers/memory/fsl-corenet-cf.c
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index c19ff05..0c99d7e 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -179,3 +179,4 @@ CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_FSL_CORENET_CF=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 5c7fa19..8fb616d 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -175,3 +175,4 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_FSL_CORENET_CF=y
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c59e9c9..fab81a1 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -61,6 +61,16 @@ config TEGRA30_MC
analysis, especially for IOMMU/SMMU(System Memory Management
Unit) module.
+config FSL_CORENET_CF
+ tristate "Freescale CoreNet Error Reporting"
+ depends on FSL_SOC_BOOKE
+ help
+ Say Y for reporting of errors from the Freescale CoreNet
+ Coherency Fabric. Errors reported include accesses to
+ physical addresses that mapped by no local access window
+ (LAW) or an invalid LAW, as well as bad cache state that
+ represents a coherency violation.
+
config FSL_IFC
bool
depends on FSL_SOC
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 71160a2..4055c47 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_OF) += of_memory.o
endif
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
+obj-$(CONFIG_FSL_CORENET_CF) += fsl-corenet-cf.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
diff --git a/drivers/memory/fsl-corenet-cf.c b/drivers/memory/fsl-corenet-cf.c
new file mode 100644
index 0000000..a57a614
--- /dev/null
+++ b/drivers/memory/fsl-corenet-cf.c
@@ -0,0 +1,246 @@
+/*
+ * CoreNet Coherency Fabric error reporting
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+enum ccf_version {
+ CCF1,
+ CCF2,
+};
+
+struct ccf_info {
+ enum ccf_version version;
+ int err_reg_offs;
+};
+
+static const struct ccf_info ccf1_info = {
+ .version = CCF1,
+ .err_reg_offs = 0xa00,
+};
+
+static const struct ccf_info ccf2_info = {
+ .version = CCF2,
+ .err_reg_offs = 0xe40,
+};
+
+static const struct of_device_id ccf_matches[] = {
+ {
+ .compatible = "fsl,corenet1-cf",
+ .data = &ccf1_info,
+ },
+ {
+ .compatible = "fsl,corenet2-cf",
+ .data = &ccf2_info,
+ },
+ {}
+};
+
+struct ccf_err_regs {
+ u32 errdet; /* 0x00 Error Detect Register */
+ /* 0x04 Error Enable (ccf1)/Disable (ccf2) Register */
+ u32 errdis;
+ /* 0x08 Error Interrupt Enable Register (ccf2 only) */
+ u32 errinten;
+ u32 cecar; /* 0x0c Error Capture Attribute Register */
+ u32 cecadrh; /* 0x10 Error Capture Address High */
+ u32 cecadrl; /* 0x14 Error Capture Address Low */
+ u32 cecar2; /* 0x18 Error Capture Attribute Register 2 */
+};
+
+/* LAE/CV also valid for errdis and errinten */
+#define ERRDET_LAE (1 << 0) /* Local Access Error */
+#define ERRDET_CV (1 << 1) /* Coherency Violation */
+#define ERRDET_CTYPE_SHIFT 26 /* Capture Type (ccf2 only) */
+#define ERRDET_CTYPE_MASK (0x3f << ERRDET_CTYPE_SHIFT)
+#define ERRDET_CAP (1 << 31) /* Capture Valid (ccf2 only) */
+
+#define CECAR_VAL (1 << 0) /* Valid (ccf1 only) */
+#define CECAR_UVT (1 << 15) /* Unavailable target ID (ccf1) */
+#define CECAR_SRCID_SHIFT_CCF1 24
+#define CECAR_SRCID_MASK_CCF1 (0xff << CECAR_SRCID_SHIFT_CCF1)
+#define CECAR_SRCID_SHIFT_CCF2 18
+#define CECAR_SRCID_MASK_CCF2 (0xff << CECAR_SRCID_SHIFT_CCF2)
+
+#define CECADRH_ADDRH 0xf
+
+struct ccf_private {
+ const struct ccf_info *info;
+ struct device *dev;
+ void __iomem *regs;
+ struct ccf_err_regs __iomem *err_regs;
+};
+
+static irqreturn_t ccf_irq(int irq, void *dev_id)
+{
+ struct ccf_private *ccf = dev_id;
+ static DEFINE_RATELIMIT_STATE(ratelimit, DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+ u32 errdet, cecar, cecar2;
+ u64 addr;
+ u32 src_id;
+ bool uvt = false;
+ bool cap_valid = false;
+
+ errdet = ioread32be(&ccf->err_regs->errdet);
+ cecar = ioread32be(&ccf->err_regs->cecar);
+ cecar2 = ioread32be(&ccf->err_regs->cecar2);
+ addr = ioread32be(&ccf->err_regs->cecadrl);
+ addr |= ((u64)(ioread32be(&ccf->err_regs->cecadrh) &
+ CECADRH_ADDRH)) << 32;
+
+ if (!__ratelimit(&ratelimit))
+ goto out;
+
+ switch (ccf->info->version) {
+ case CCF1:
+ if (cecar & CECAR_VAL) {
+ if (cecar & CECAR_UVT)
+ uvt = true;
+
+ src_id = (cecar & CECAR_SRCID_MASK_CCF1) >>
+ CECAR_SRCID_SHIFT_CCF1;
+ cap_valid = true;
+ }
+
+ break;
+ case CCF2:
+ if (errdet & ERRDET_CAP) {
+ src_id = (cecar & CECAR_SRCID_MASK_CCF2) >>
+ CECAR_SRCID_SHIFT_CCF2;
+ cap_valid = true;
+ }
+
+ break;
+ }
+
+ dev_crit(ccf->dev, "errdet 0x%08x cecar 0x%08x cecar2 0x%08x\n",
+ errdet, cecar, cecar2);
+
+ if (errdet & ERRDET_LAE) {
+ if (uvt)
+ dev_crit(ccf->dev, "LAW Unavailable Target ID\n");
+ else
+ dev_crit(ccf->dev, "Local Access Window Error\n");
+ }
+
+ if (errdet & ERRDET_CV)
+ dev_crit(ccf->dev, "Coherency Violation\n");
+
+ if (cap_valid) {
+ dev_crit(ccf->dev, "address 0x%09llx, src id 0x%x\n",
+ addr, src_id);
+ }
+
+out:
+ iowrite32be(errdet, &ccf->err_regs->errdet);
+ return errdet ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int ccf_probe(struct platform_device *pdev)
+{
+ struct ccf_private *ccf;
+ struct resource *r;
+ const struct of_device_id *match;
+ int ret, irq;
+
+ match = of_match_device(ccf_matches, &pdev->dev);
+ if (WARN_ON(!match))
+ return -ENODEV;
+
+ ccf = devm_kzalloc(&pdev->dev, sizeof(*ccf), GFP_KERNEL);
+ if (!ccf)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
+ return -ENXIO;
+ }
+
+ ccf->regs = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(ccf->regs)) {
+ dev_err(&pdev->dev, "%s: can't map mem resource\n", __func__);
+ return PTR_ERR(ccf->regs);
+ }
+
+ ccf->dev = &pdev->dev;
+ ccf->info = match->data;
+ ccf->err_regs = ccf->regs + ccf->info->err_reg_offs;
+
+ dev_set_drvdata(&pdev->dev, ccf);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "%s: no irq\n", __func__);
+ return -ENXIO;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: can't request irq\n", __func__);
+ return ret;
+ }
+
+ switch (ccf->info->version) {
+ case CCF1:
+ /* On CCF1 this register enables rather than disables. */
+ iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errdis);
+ break;
+
+ case CCF2:
+ iowrite32be(0, &ccf->err_regs->errdis);
+ iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errinten);
+ break;
+ }
+
+ return 0;
+}
+
+static int ccf_remove(struct platform_device *pdev)
+{
+ struct ccf_private *ccf = dev_get_drvdata(&pdev->dev);
+
+ switch (ccf->info->version) {
+ case CCF1:
+ iowrite32be(0, &ccf->err_regs->errdis);
+ break;
+
+ case CCF2:
+ iowrite32be(0, &ccf->err_regs->errinten);
+ break;
+ }
+
+ return 0;
+}
+
+static struct platform_driver ccf_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = ccf_matches,
+ },
+ .probe = ccf_probe,
+ .remove = ccf_remove,
+};
+
+module_platform_driver(ccf_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale CoreNet Coherency Fabric error reporting");
--
1.9.1
^ permalink raw reply related
* Re: [PATCH] powerpc/85xx: Add T4240RDB board support
From: Scott Wood @ 2014-05-30 21:25 UTC (permalink / raw)
To: Chunhe Lan; +Cc: linuxppc-dev
In-Reply-To: <1401264681-30058-1-git-send-email-Chunhe.Lan@freescale.com>
On Wed, 2014-05-28 at 16:11 +0800, Chunhe Lan wrote:
> @@ -125,6 +127,9 @@ CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_EDAC=y
> CONFIG_EDAC_MM_EDAC=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_DS1374=y
> +CONFIG_RTC_DRV_CMOS=y
> CONFIG_DMADEVICES=y
> CONFIG_FSL_DMA=y
> CONFIG_EXT2_FS=y
This conflicts with http://patchwork.ozlabs.org/patch/353243/ and you
shouldn't need CONFIG_RTC_DRV_CMOS.
> diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
> index c17aae8..6f279ce 100644
> --- a/arch/powerpc/platforms/85xx/Kconfig
> +++ b/arch/powerpc/platforms/85xx/Kconfig
> @@ -265,7 +265,7 @@ config CORENET_GENERIC
> For 32bit kernel, the following boards are supported:
> P2041 RDB, P3041 DS and P4080 DS
> For 64bit kernel, the following boards are supported:
> - T4240 QDS and B4 QDS
> + T4240 QDS, T4240 RDB and B4 QDS
T4240QDS/RDB
> diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
> index 8e4b1e1..2f50526 100644
> --- a/arch/powerpc/platforms/85xx/corenet_generic.c
> +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
> @@ -119,6 +119,7 @@ static const char * const boards[] __initconst = {
> "fsl,P5020DS",
> "fsl,P5040DS",
> "fsl,T4240QDS",
> + "fsl,T4240RDB",
> "fsl,B4860QDS",
> "fsl,B4420QDS",
> "fsl,B4220QDS",
What about hv_boards?
-Scott
^ permalink raw reply
* Re: [PATCH] t4240/dts: Enable third elo3 DMA engine support
From: Scott Wood @ 2014-05-30 21:21 UTC (permalink / raw)
To: Chunhe Lan; +Cc: linuxppc-dev
In-Reply-To: <1401266854-31088-1-git-send-email-Chunhe.Lan@freescale.com>
On Wed, 2014-05-28 at 16:47 +0800, Chunhe Lan wrote:
> T4240QDS and T4240RDB have the third DMA engine
> controller. So add corresponding DMA node into
> dts file.
s/T4240QDS and T4240RDB have/T4240 has/ -- the board is irrelevant.
I'll fix when applying.
-Scott
^ permalink raw reply
* Re: [PATCH v2] powerpc/t2080rdb: Add T2080RDB board support
From: Scott Wood @ 2014-05-30 21:19 UTC (permalink / raw)
To: Shengzhou Liu; +Cc: linuxppc-dev
In-Reply-To: <1400833623-17547-3-git-send-email-Shengzhou.Liu@freescale.com>
On Fri, 2014-05-23 at 16:27 +0800, Shengzhou Liu wrote:
> diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
> index e3578b7..a8a0f2f 100644
> --- a/arch/powerpc/platforms/85xx/Kconfig
> +++ b/arch/powerpc/platforms/85xx/Kconfig
> @@ -259,7 +259,7 @@ config CORENET_GENERIC
> For 32bit kernel, the following boards are supported:
> P2041 RDB, P3041 DS and P4080 DS
> For 64bit kernel, the following boards are supported:
> - T208x QDS, T4240 QDS and B4 QDS
> + T208x QDS/RDB, T4240 QDS and B4 QDS
Apparently you meant for this to be applied after the QDS patch --
please ensure patches within a set are numbered.
-Scott
^ permalink raw reply
* Re: [PATCH 1/3 v2] powerpc/fsl-booke: Add support for T2080/T2081 SoC
From: Scott Wood @ 2014-05-30 21:17 UTC (permalink / raw)
To: Shengzhou Liu; +Cc: linuxppc-dev
In-Reply-To: <1400833623-17547-1-git-send-email-Shengzhou.Liu@freescale.com>
On Fri, 2014-05-23 at 16:27 +0800, Shengzhou Liu wrote:
> + iommu@20000 {
> + compatible = "fsl,pamu-v1.0", "fsl,pamu";
> + reg = <0x20000 0x6000>;
> + interrupts = <
> + 24 2 0 0
> + 16 2 1 30>;
> + };
Please add fsl,portid-mapping here and on the CPU nodes.
> + clockgen: global-utilities@e1000 {
> + compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0",
> + "fixed-clock";
> + reg = <0xe1000 0x1000>;
> + clock-output-names = "sysclk";
> + #clock-cells = <0>;
Please update this based on
Documentation/devicetree/bindings/clock/qoriq-clock.txt.
In particular, sysclk needs to go in a subnode rather than in the
global-utilities node.
-Scott
^ permalink raw reply
* Re: [PATCH] powerpc/booke64: wrap tlb lock and search in htw miss with FTR_SMT
From: Scott Wood @ 2014-05-30 20:56 UTC (permalink / raw)
To: Laurentiu Tudor; +Cc: linuxppc-dev
In-Reply-To: <1401461955-18007-1-git-send-email-Laurentiu.Tudor@freescale.com>
On Fri, 2014-05-30 at 17:59 +0300, Laurentiu Tudor wrote:
> Virtualized environments expose a e6500 dual-threaded core
> as two single-threaded e6500 cores.
s/expose/may expose/
I'll fix when applying.
> Take advantage of this and get rid of the tlb lock and the trap-causing tlbsx in
> the htw miss handler by guarding with CPU_FTR_SMT, as it's
> already being done in the bolted tlb1 miss handler.
It's also possible that some non-virtualized workloads may also benefit
from getting rid of the lock more than they benefit from enabling SMT
(or perform better without SMT for other reasons).
-Scott
^ permalink raw reply
* Re: [PATCH 2/2] gpio: gpiolib: set gpiochip_remove retval to void
From: Lars-Peter Clausen @ 2014-05-30 18:16 UTC (permalink / raw)
To: David Daney
Cc: platform-driver-x86, Alexandre Courbot, patches,
Linux MIPS Mailing List, netdev@vger.kernel.org, Linus Walleij,
Linux-sh list, linux-wireless, linux-kernel@vger.kernel.org,
spear-devel, linux-samsungsoc, linux-gpio@vger.kernel.org,
Geert Uytterhoeven, linux-leds@vger.kernel.org, m,
linux-input@vger.kernel.org, driverdevel,
Linux Media Mailing List, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, abdoulaye berthe
In-Reply-To: <5388C0F1.90503@gmail.com>
On 05/30/2014 07:33 PM, David Daney wrote:
> On 05/30/2014 04:39 AM, Geert Uytterhoeven wrote:
>> On Fri, May 30, 2014 at 1:30 PM, abdoulaye berthe <berthe.ab@gmail.com>
>> wrote:
>>> --- a/drivers/gpio/gpiolib.c
>>> +++ b/drivers/gpio/gpiolib.c
>>> @@ -1263,10 +1263,9 @@ static void gpiochip_irqchip_remove(struct
>>> gpio_chip *gpiochip);
>>> *
>>> * A gpio_chip with any GPIOs still requested may not be removed.
>>> */
>>> -int gpiochip_remove(struct gpio_chip *chip)
>>> +void gpiochip_remove(struct gpio_chip *chip)
>>> {
>>> unsigned long flags;
>>> - int status = 0;
>>> unsigned id;
>>>
>>> acpi_gpiochip_remove(chip);
>>> @@ -1278,24 +1277,15 @@ int gpiochip_remove(struct gpio_chip *chip)
>>> of_gpiochip_remove(chip);
>>>
>>> for (id = 0; id < chip->ngpio; id++) {
>>> - if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
>>> - status = -EBUSY;
>>> - break;
>>> - }
>>> - }
>>> - if (status == 0) {
>>> - for (id = 0; id < chip->ngpio; id++)
>>> - chip->desc[id].chip = NULL;
>>> -
>>> - list_del(&chip->list);
>>> + if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
>>> + panic("gpio: removing gpiochip with gpios still
>>> requested\n");
>>
>> panic?
>
> NACK to the patch for this reason. The strongest thing you should do here
> is WARN.
>
> That said, I am not sure why we need this whole patch set in the first place.
Well, what currently happens when you remove a device that is a provider of
a gpio_chip which is still in use, is that the kernel crashes. Probably with
a rather cryptic error message. So this patch doesn't really change the
behavior, but makes it more explicit what is actually wrong. And even if you
replace the panic() by a WARN() it will again just crash slightly later.
This is a design flaw in the GPIO subsystem that needs to be fixed.
- Lars
^ permalink raw reply
* Re: [PATCH 2/2] gpio: gpiolib: set gpiochip_remove retval to void
From: David Daney @ 2014-05-30 17:33 UTC (permalink / raw)
To: abdoulaye berthe
Cc: driverdevel, Alexandre Courbot, patches, Linux MIPS Mailing List,
netdev@vger.kernel.org, Linus Walleij, Linux-sh list,
linux-wireless, linux-kernel@vger.kernel.org, spear-devel,
linux-samsungsoc, linux-gpio@vger.kernel.org, Geert Uytterhoeven,
linux-leds@vger.kernel.org, m, linux-input@vger.kernel.org,
platform-driver-x86, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, Linux Media Mailing List
In-Reply-To: <CAMuHMdV6AtjD2aqO3buzj8Eo7A7xc_+ROYnxEi2sdjMaqFiAuA@mail.gmail.com>
On 05/30/2014 04:39 AM, Geert Uytterhoeven wrote:
> On Fri, May 30, 2014 at 1:30 PM, abdoulaye berthe <berthe.ab@gmail.com> wrote:
>> --- a/drivers/gpio/gpiolib.c
>> +++ b/drivers/gpio/gpiolib.c
>> @@ -1263,10 +1263,9 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip);
>> *
>> * A gpio_chip with any GPIOs still requested may not be removed.
>> */
>> -int gpiochip_remove(struct gpio_chip *chip)
>> +void gpiochip_remove(struct gpio_chip *chip)
>> {
>> unsigned long flags;
>> - int status = 0;
>> unsigned id;
>>
>> acpi_gpiochip_remove(chip);
>> @@ -1278,24 +1277,15 @@ int gpiochip_remove(struct gpio_chip *chip)
>> of_gpiochip_remove(chip);
>>
>> for (id = 0; id < chip->ngpio; id++) {
>> - if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
>> - status = -EBUSY;
>> - break;
>> - }
>> - }
>> - if (status == 0) {
>> - for (id = 0; id < chip->ngpio; id++)
>> - chip->desc[id].chip = NULL;
>> -
>> - list_del(&chip->list);
>> + if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
>> + panic("gpio: removing gpiochip with gpios still requested\n");
>
> panic?
NACK to the patch for this reason. The strongest thing you should do
here is WARN.
That said, I am not sure why we need this whole patch set in the first
place.
David Daney
>
> Is this likely to happen?
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox