* Re: [PATCH 2/2] flexcan: add err interrupt for p1010rdb
From: Marc Kleine-Budde @ 2014-06-19 8:28 UTC (permalink / raw)
To: Zhao Qiang, linuxppc-dev, linux-can, wg, B07421
In-Reply-To: <1403163973-48239-2-git-send-email-B45475@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 1314 bytes --]
On 06/19/2014 09:46 AM, Zhao Qiang wrote:
> add err interrupt for p1010rdb into dts.
Please update the flexcan binding documentation, too.
Marc
>
> Signed-off-by: Zhao Qiang <B45475@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
> index 4313ff6..bcd95ba 100644
> --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
> @@ -141,13 +141,15 @@
> can0: can@1c000 {
> compatible = "fsl,p1010-flexcan";
> reg = <0x1c000 0x1000>;
> - interrupts = <48 0x2 0 0>;
> + interrupts = <48 0x2 0 0
> + 16 0x2 0 0>;
> };
>
> can1: can@1d000 {
> compatible = "fsl,p1010-flexcan";
> reg = <0x1d000 0x1000>;
> - interrupts = <61 0x2 0 0>;
> + interrupts = <61 0x2 0 0
> + 16 0x2 0 0>;
> };
>
> L2: l2-cache-controller@20000 {
>
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]
^ permalink raw reply
* Re: OF_DYNAMIC node lifecycle
From: Pantelis Antoniou @ 2014-06-19 8:33 UTC (permalink / raw)
To: Grant Likely
Cc: devicetree, Steven Rostedt, linuxppc-dev, Tyrel Datwyler,
Thomas Gleixner
In-Reply-To: <CACxGe6tsXuLZT=h8S0yRPRPy6Hqz1xkX8G+ViY0cxEUuxZ1dsw@mail.gmail.com>
Hi Grant,
CCing Thomas Gleixner & Steven Rostedt, since they might have a few
ideas...
On Jun 18, 2014, at 11:07 PM, Grant Likely wrote:
> Hi Nathan and Tyrel,
>
> I'm looking into lifecycle issues on nodes modified by OF_DYNAMIC, and
> I'm hoping you can help me. Right now, pseries seems to be the only
> user of OF_DYNAMIC, but making OF_DYNAMIC work has a huge impact on
> the entire kernel because it requires all DT code to manage reference
> counting with iterating over nodes. Most users simply get it wrong.
> Pantelis did some investigation and found that the reference counts on
> a running kernel are all over the place. I have my doubts that any
> code really gets it right.
>
> The problem is that users need to know when it is appropriate to call
> of_node_get()/of_node_put(). All list traversals that exit early need
> an extra call to of_node_put(), and code that is searching for a node
> in the tree and holding a reference to it needs to call of_node_get().
>
In hindsight it appears that drivers just can't get the lifecycle right.
So we need to simplify things.
> I've got a few pseries questions:
> - What are the changes being requested by pseries firmware? Is it only
> CPUs and memory nodes, or does it manipulate things all over the tree?
> - How frequent are the changes? How many changes would be likely over
> the runtime of the system?
> - Are you able to verify that removed nodes are actually able to be
> freed correctly? Do you have any testcases for node removal?
>
> I'm thinking very seriously about changing the locking semantics of DT
> code entirely so that most users never have to worry about
> of_node_get/put at all. If the DT code is switched to use rcu
> primitives for tree iteration (which also means making DT code use
> list_head, something I'm already investigating), then instead of
> trying to figure out of_node_get/put rules, callers could use
> rcu_read_lock()/rcu_read_unlock() to protect the region that is
> searching over nodes, and only call of_node_get() if the node pointer
> is needed outside the rcu read-side lock.
>
> I'd really like to be rid of the node reference counting entirely, but
> I can't figure out a way of doing that safely, so I'd settle for
> making it a lot easier to get correct.
>
Since we're going about changing things, how about that devtree_lock?
We're using a raw_spinlock and we're always taking the lock with
interrupts disabled.
If we're going to make DT changes frequently during normal runtime
and not only during boot time, those are bad for any kind of real-time
performance.
So the question is, do we really have code that access the live tree
during atomic sections? Is that something we want? Enforcing this
will make our lives easier, and we'll get the change to replace
that spinlock with a mutex.
> Thoughts?
>
> g.
Regards
-- Pantelis
^ permalink raw reply
* Re: [RFC PATCH V3 14/17] ppc/pci: create/release dev-tree node for VFs
From: Grant Likely @ 2014-06-19 8:30 UTC (permalink / raw)
To: Wei Yang
Cc: Benjamin Herrenschmidt, linux-pci@vger.kernel.org, gwshan,
Mike Qiu, Bjorn Helgaas, yan, linuxppc-dev@lists.ozlabs.org
In-Reply-To: <20140619024651.GC6478@richard>
On Thu, Jun 19, 2014 at 3:46 AM, Wei Yang <weiyang@linux.vnet.ibm.com> wrote:
> On Wed, Jun 18, 2014 at 07:26:27PM +0100, Grant Likely wrote:
>>On Tue, Jun 10, 2014 at 2:56 AM, Wei Yang <weiyang@linux.vnet.ibm.com> wrote:
>>> Currently, powernv platform is not aware of VFs. This means no dev-node
>>> represents a VF. Also, VF PCI device is created when PF driver want to enable
>>> it. This leads to the pdn->pdev and pdn->pe_number an invalid value.
>>>
>>> This patch create/release dev-node for VF and fixs this when a VF's pci_dev
>>> is created.
>>>
>>> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>>
>>I don't think this is the right way to handle this. Unless it is a
>>fixup to a buggy devicetree provided by firmware, I don't want to see
>>any code modifying the devicetree to describe stuff that is able to be
>>directly enumerated. Really the pci code should handle the lack of a
>>device_node gracefully. If it cannot then it should be fixed.
>
> Grant,
>
> Glad to see your comment.
>
> I will fix this in the firmware.
That's not really what I meant. The kernel should be able to deal with
virtual functions even if firmware doesn't know how, and the kernel
should not require modifying the device tree to support them.
I'm saying fix the kernel so that a device node is not necessary for
virtual functions.
g.
^ permalink raw reply
* Re: [PATCH v3 -next 4/9] DMA, CMA: support arbitrary bitmap granularity
From: Joonsoo Kim @ 2014-06-19 8:18 UTC (permalink / raw)
To: Andrew Morton
Cc: kvm-ppc, Russell King - ARM Linux, kvm, linux-mm, Gleb Natapov,
Greg Kroah-Hartman, Alexander Graf, Michal Nazarewicz,
linux-kernel, Minchan Kim, Paul Mackerras, Aneesh Kumar K.V,
Paolo Bonzini, Zhang Yanfei, linuxppc-dev, linux-arm-kernel,
Marek Szyprowski
In-Reply-To: <20140618134815.69c4d0a5f916846f9857e9ff@linux-foundation.org>
On Wed, Jun 18, 2014 at 01:48:15PM -0700, Andrew Morton wrote:
> On Mon, 16 Jun 2014 14:40:46 +0900 Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote:
>
> > PPC KVM's CMA area management requires arbitrary bitmap granularity,
> > since they want to reserve very large memory and manage this region
> > with bitmap that one bit for several pages to reduce management overheads.
> > So support arbitrary bitmap granularity for following generalization.
> >
> > ...
> >
> > --- a/drivers/base/dma-contiguous.c
> > +++ b/drivers/base/dma-contiguous.c
> > @@ -38,6 +38,7 @@ struct cma {
> > unsigned long base_pfn;
> > unsigned long count;
> > unsigned long *bitmap;
> > + unsigned int order_per_bit; /* Order of pages represented by one bit */
> > struct mutex lock;
> > };
> >
> > @@ -157,9 +158,37 @@ void __init dma_contiguous_reserve(phys_addr_t limit)
> >
> > static DEFINE_MUTEX(cma_mutex);
> >
> > +static unsigned long cma_bitmap_aligned_mask(struct cma *cma, int align_order)
> > +{
> > + return (1 << (align_order >> cma->order_per_bit)) - 1;
> > +}
>
> Might want a "1UL << ..." here.
Okay!
>
> > +static unsigned long cma_bitmap_maxno(struct cma *cma)
> > +{
> > + return cma->count >> cma->order_per_bit;
> > +}
> > +
> > +static unsigned long cma_bitmap_pages_to_bits(struct cma *cma,
> > + unsigned long pages)
> > +{
> > + return ALIGN(pages, 1 << cma->order_per_bit) >> cma->order_per_bit;
> > +}
>
> Ditto. I'm not really sure what the compiler will do in these cases,
> but would prefer not to rely on it anyway!
Okay!
Thanks for fix!
^ permalink raw reply
* [PATCH 2/2] flexcan: add err interrupt for p1010rdb
From: Zhao Qiang @ 2014-06-19 7:46 UTC (permalink / raw)
To: linuxppc-dev, linux-can, wg, mkl, B07421; +Cc: Zhao Qiang
In-Reply-To: <1403163973-48239-1-git-send-email-B45475@freescale.com>
add err interrupt for p1010rdb into dts.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 4313ff6..bcd95ba 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -141,13 +141,15 @@
can0: can@1c000 {
compatible = "fsl,p1010-flexcan";
reg = <0x1c000 0x1000>;
- interrupts = <48 0x2 0 0>;
+ interrupts = <48 0x2 0 0
+ 16 0x2 0 0>;
};
can1: can@1d000 {
compatible = "fsl,p1010-flexcan";
reg = <0x1d000 0x1000>;
- interrupts = <61 0x2 0 0>;
+ interrupts = <61 0x2 0 0
+ 16 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
--
1.8.5
^ permalink raw reply related
* [PATCH 1/2] flexcan: add err_irq handler for flexcan
From: Zhao Qiang @ 2014-06-19 7:46 UTC (permalink / raw)
To: linuxppc-dev, linux-can, wg, mkl, B07421; +Cc: Zhao Qiang
when flexcan is not physically linked, command 'cantest' will
trigger an err_irq, add err_irq handler for it.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
---
drivers/net/can/flexcan.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index aaed97b..e3c6cfd 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -206,6 +206,7 @@ struct flexcan_priv {
void __iomem *base;
u32 reg_esr;
u32 reg_ctrl_default;
+ unsigned int err_irq;
struct clk *clk_ipg;
struct clk *clk_per;
@@ -654,6 +655,23 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t flexcan_err_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct flexcan_priv *priv = netdev_priv(dev);
+ struct flexcan_regs __iomem *regs = priv->base;
+ u32 reg_ctrl, reg_esr;
+
+ reg_esr = flexcan_read(®s->esr);
+ reg_ctrl = flexcan_read(®s->ctrl);
+ if (reg_esr & FLEXCAN_ESR_TX_WRN) {
+ flexcan_write(reg_esr & ~FLEXCAN_ESR_TX_WRN, ®s->esr);
+ flexcan_write(reg_ctrl & ~FLEXCAN_CTRL_ERR_MSK, ®s->ctrl);
+ netdev_err(dev, "No physical link!\n");
+ }
+ return IRQ_HANDLED;
+}
+
static void flexcan_set_bittiming(struct net_device *dev)
{
const struct flexcan_priv *priv = netdev_priv(dev);
@@ -860,6 +878,12 @@ static int flexcan_open(struct net_device *dev)
if (err)
goto out_close;
+ if (priv->err_irq)
+ err = request_irq(priv->err_irq, flexcan_err_irq, IRQF_SHARED,
+ dev->name, dev);
+ if (err)
+ goto out_close;
+
/* start chip and queuing */
err = flexcan_chip_start(dev);
if (err)
@@ -1007,7 +1031,7 @@ static int flexcan_probe(struct platform_device *pdev)
struct resource *mem;
struct clk *clk_ipg = NULL, *clk_per = NULL;
void __iomem *base;
- int err, irq;
+ int err, irq, err_irq;
u32 clock_freq = 0;
if (pdev->dev.of_node)
@@ -1034,6 +1058,10 @@ static int flexcan_probe(struct platform_device *pdev)
if (irq <= 0)
return -ENODEV;
+ err_irq = platform_get_irq(pdev, 1);
+ if (err_irq <= 0)
+ err_irq = 0;
+
base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -1057,6 +1085,7 @@ static int flexcan_probe(struct platform_device *pdev)
dev->flags |= IFF_ECHO;
priv = netdev_priv(dev);
+ priv->err_irq = err_irq;
priv->can.clock.freq = clock_freq;
priv->can.bittiming_const = &flexcan_bittiming_const;
priv->can.do_set_mode = flexcan_set_mode;
--
1.8.5
^ permalink raw reply related
* Re: Re: [RFT PATCH -next v3] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64
From: Masami Hiramatsu @ 2014-06-19 7:26 UTC (permalink / raw)
To: Suzuki K. Poulose
Cc: Jeremy Fitzhardinge, linux-ia64, sparse,
Linux Kernel Mailing List, Paul Mackerras, H. Peter Anvin,
Thomas Gleixner, linux-tip-commits, anil.s.keshavamurthy,
Ingo Molnar, Fenghua Yu, Arnd Bergmann, Rusty Russell,
Chris Wright, yrl.pp-manager.tt, akataria, Tony Luck, Kevin Hao,
linuxppc-dev, rdunlap, Tony Luck, dl9pf, Andrew Morton,
Linus Torvalds, David S. Miller
In-Reply-To: <53A285D0.1030106@in.ibm.com>
(2014/06/19 15:40), Suzuki K. Poulose wrote:
> On 06/19/2014 10:22 AM, Masami Hiramatsu wrote:
>> (2014/06/19 10:30), Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 17:46 +0900, Masami Hiramatsu wrote:
>>>> (2014/06/18 16:56), Michael Ellerman wrote:
>>>>> On Fri, 2014-06-06 at 15:38 +0900, Masami Hiramatsu wrote:
>>>>>> Ping?
>>>>>>
>>>>>> I guess this should go to 3.16 branch, shouldn't it?
>>>>>
>>>>>>> diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
>>>>>>> index bfb6ded..8b89d65 100644
>>>>>>> --- a/arch/powerpc/include/asm/types.h
>>>>>>> +++ b/arch/powerpc/include/asm/types.h
>>>>>>> @@ -25,6 +25,17 @@ typedef struct {
>>>>>>> unsigned long env;
>>>>>>> } func_descr_t;
>>>>>>>
>>>>>>> +#if defined(CONFIG_PPC64) && (!defined(_CALL_ELF) || _CALL_ELF == 1)
>>>>>>> +/*
>>>>>>> + * On PPC64 ABIv1 the function pointer actually points to the
>>>>>>> + * function's descriptor. The first entry in the descriptor is the
>>>>>>> + * address of the function text.
>>>>>>> + */
>>>>>>> +#define function_entry(fn) (((func_descr_t *)(fn))->entry)
>>>>>>> +#else
>>>>>>> +#define function_entry(fn) ((unsigned long)(fn))
>>>>>>> +#endif
>>>>>
>>>>> We already have ppc_function_entry(), can't you use that?
>>>>
>>>> I'd like to ask you whether the address which ppc_function_entry() returns on
>>>> PPC ABIv2 is really same address in kallsyms or not.
>>>> As you can see, kprobes uses function_entry() to get the actual entry address
>>>> where kallsyms knows. I have not much information about that, but it seems that
>>>> the "global entry point" is the address which kallsyms knows, isn't it?
>>>
>>> OK. I'm not sure off the top of my head which address kallsyms knows about, but
>>> yes it's likely that it is the global entry point.
>>>
>>> I recently sent a patch to add ppc_global_function_entry(), because we need it
>>> in the ftrace code. Once that is merged you could use that.
>>
>> Yeah, I could use that. But since this is used in arch-independent code (e.g. IA64
>> needs similar macro), I think we'd better define function_entry() in asm/types.h for
>> general use (for kallsyms), and rename ppc_function_entry to local_function_entry()
>> in asm/code-patching.h.
>>
>>
>>> How do you hit the original problem, you don't actually specify in your commit
>>> message? Something with kprobes obviously, but what exactly? I'll try and
>>> reproduce it here.
>>
>> Ah, those messages should be shown in dmesg when booting if it doesn't work,
>> because the messages are printed by initialization process of kprobe blacklist.
>> So, reproducing it is just enabling CONFIG_KPROBES and boot it.
> Well, we don't get those messages on Power, since the kallsyms has the
> entries for ".function_name". The correct way to verify is, either :
Hmm, that seems another issue on powerpc. Is that expected(and designed)
behavior? And if so, how I can verify when initializing blacklist?
(should I better use kallsyms_lookup() and kallsyms_lookup_name() for
verification?)
Thank you,
>
> 1) Dump the black_list via xmon ( see :
> https://lkml.org/lkml/2014/5/29/893 ) and verify the entries.
>
> or
>
> 2) Issue a kprobe on a black listed entry and hit a success,(which we
> will, since we don't check the actual function address).
>
> Thanks
> Suzuki
>
>
>>
>> Thank you,
>>
--
Masami HIRAMATSU
Software Platform Research Dept. Linux Technology Research Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com
^ permalink raw reply
* [PATCH 1/2] PCI: Make resetting secondary bus logic common
From: Gavin Shan @ 2014-06-19 7:22 UTC (permalink / raw)
To: linux-pci, linuxppc-dev; +Cc: bhelgaas, Gavin Shan
Commit d92a208d086 ("powerpc/pci: Mask linkDown on resetting PCI bus")
implemented same logic (resetting PCI secondary bus by bridge's config
register PCI_BRIDGE_CTL_BUS_RESET) in PCI core and arch-dependent
code. In order to avoid the duplicate implementation introduced by the
commit, the patch puts the logic into pci_reset_secondary_bus().
That commit also missed declaring newly introduced weak function
pcibios_reset_secondary_bus() in linux/include/pci.h. The patch fixes
it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
drivers/pci/pci.c | 7 ++++++-
include/linux/pci.h | 2 ++
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 63a54a3..758f1d8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3193,7 +3193,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
return 0;
}
-void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
+void pci_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;
@@ -3219,6 +3219,11 @@ void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
ssleep(1);
}
+void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
+{
+ pci_reset_secondary_bus(dev);
+}
+
/**
* pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
* @dev: Bridge device
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 466bcd1..340529d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -978,6 +978,8 @@ int pci_try_reset_slot(struct pci_slot *slot);
int pci_probe_reset_bus(struct pci_bus *bus);
int pci_reset_bus(struct pci_bus *bus);
int pci_try_reset_bus(struct pci_bus *bus);
+void pci_reset_secondary_bus(struct pci_dev *dev);
+void pcibios_reset_secondary_bus(struct pci_dev *dev);
void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
void pci_update_resource(struct pci_dev *dev, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
--
1.8.3.2
^ permalink raw reply related
* [PATCH 2/2] powerpc/pci: Remove duplicate logic
From: Gavin Shan @ 2014-06-19 7:22 UTC (permalink / raw)
To: linux-pci, linuxppc-dev; +Cc: bhelgaas, Gavin Shan
In-Reply-To: <1403162565-26835-1-git-send-email-gwshan@linux.vnet.ibm.com>
Since the logic to reset PCI secondary bus by PCI config register
PCI_BRIDGE_CTL_BUS_RESET is included in pci_reset_secondary_bus(),
we needn't implement another one of ourself. The patch removes the
duplicate implementation and calls pci_reset_secondary_bus().
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/kernel/pci-common.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index b49c72f..b2814e2 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -123,21 +123,12 @@ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
void pcibios_reset_secondary_bus(struct pci_dev *dev)
{
- u16 ctrl;
-
if (ppc_md.pcibios_reset_secondary_bus) {
ppc_md.pcibios_reset_secondary_bus(dev);
return;
}
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
- ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
- msleep(2);
-
- ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
- ssleep(1);
+ pci_reset_secondary_bus(dev);
}
static resource_size_t pcibios_io_size(const struct pci_controller *hose)
--
1.8.3.2
^ permalink raw reply related
* Re: Boot failure in Power7 pSeries
From: Michael Ellerman @ 2014-06-19 7:21 UTC (permalink / raw)
To: Mike Qiu; +Cc: linuxppc-dev
In-Reply-To: <53A279FB.8010307@linux.vnet.ibm.com>
On Thu, 2014-06-19 at 13:49 +0800, Mike Qiu wrote:
> Hi Michael,
>
> The config file has attached ...
Thanks.
Nothing is obviously broken in there.
Can you try building with POWERNV=n, I think that will fix it.
cheers
^ permalink raw reply
* Re: [RFT PATCH -next v3] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64
From: Suzuki K. Poulose @ 2014-06-19 6:40 UTC (permalink / raw)
To: Masami Hiramatsu, Michael Ellerman
Cc: Jeremy Fitzhardinge, linux-ia64, sparse,
Linux Kernel Mailing List, Paul Mackerras, H. Peter Anvin,
Thomas Gleixner, linux-tip-commits, anil.s.keshavamurthy,
Ingo Molnar, Fenghua Yu, Arnd Bergmann, Rusty Russell,
Chris Wright, yrl.pp-manager.tt, akataria, Tony Luck, Kevin Hao,
linuxppc-dev, rdunlap, Tony Luck, dl9pf, Andrew Morton,
Linus Torvalds, David S. Miller
In-Reply-To: <53A26C99.6060000@hitachi.com>
On 06/19/2014 10:22 AM, Masami Hiramatsu wrote:
> (2014/06/19 10:30), Michael Ellerman wrote:
>> On Wed, 2014-06-18 at 17:46 +0900, Masami Hiramatsu wrote:
>>> (2014/06/18 16:56), Michael Ellerman wrote:
>>>> On Fri, 2014-06-06 at 15:38 +0900, Masami Hiramatsu wrote:
>>>>> Ping?
>>>>>
>>>>> I guess this should go to 3.16 branch, shouldn't it?
>>>>
>>>>>> diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
>>>>>> index bfb6ded..8b89d65 100644
>>>>>> --- a/arch/powerpc/include/asm/types.h
>>>>>> +++ b/arch/powerpc/include/asm/types.h
>>>>>> @@ -25,6 +25,17 @@ typedef struct {
>>>>>> unsigned long env;
>>>>>> } func_descr_t;
>>>>>>
>>>>>> +#if defined(CONFIG_PPC64) && (!defined(_CALL_ELF) || _CALL_ELF == 1)
>>>>>> +/*
>>>>>> + * On PPC64 ABIv1 the function pointer actually points to the
>>>>>> + * function's descriptor. The first entry in the descriptor is the
>>>>>> + * address of the function text.
>>>>>> + */
>>>>>> +#define function_entry(fn) (((func_descr_t *)(fn))->entry)
>>>>>> +#else
>>>>>> +#define function_entry(fn) ((unsigned long)(fn))
>>>>>> +#endif
>>>>
>>>> We already have ppc_function_entry(), can't you use that?
>>>
>>> I'd like to ask you whether the address which ppc_function_entry() returns on
>>> PPC ABIv2 is really same address in kallsyms or not.
>>> As you can see, kprobes uses function_entry() to get the actual entry address
>>> where kallsyms knows. I have not much information about that, but it seems that
>>> the "global entry point" is the address which kallsyms knows, isn't it?
>>
>> OK. I'm not sure off the top of my head which address kallsyms knows about, but
>> yes it's likely that it is the global entry point.
>>
>> I recently sent a patch to add ppc_global_function_entry(), because we need it
>> in the ftrace code. Once that is merged you could use that.
>
> Yeah, I could use that. But since this is used in arch-independent code (e.g. IA64
> needs similar macro), I think we'd better define function_entry() in asm/types.h for
> general use (for kallsyms), and rename ppc_function_entry to local_function_entry()
> in asm/code-patching.h.
>
>
>> How do you hit the original problem, you don't actually specify in your commit
>> message? Something with kprobes obviously, but what exactly? I'll try and
>> reproduce it here.
>
> Ah, those messages should be shown in dmesg when booting if it doesn't work,
> because the messages are printed by initialization process of kprobe blacklist.
> So, reproducing it is just enabling CONFIG_KPROBES and boot it.
Well, we don't get those messages on Power, since the kallsyms has the
entries for ".function_name". The correct way to verify is, either :
1) Dump the black_list via xmon ( see :
https://lkml.org/lkml/2014/5/29/893 ) and verify the entries.
or
2) Issue a kprobe on a black listed entry and hit a success,(which we
will, since we don't check the actual function address).
Thanks
Suzuki
>
> Thank you,
>
^ permalink raw reply
* Re: [PATCH] vfio: Fix endianness handling for emulated BARs
From: Alexey Kardashevskiy @ 2014-06-19 6:17 UTC (permalink / raw)
To: Bharat.Bhushan@freescale.com, Alex Williamson
Cc: Alexander Graf, linuxppc-dev@lists.ozlabs.org, Nikunj A Dadhania,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
In-Reply-To: <0df01f652acd446fa6db39f7049d6e72@BLUPR03MB566.namprd03.prod.outlook.com>
On 06/19/2014 03:30 PM, Bharat.Bhushan@freescale.com wrote:
>
>
>> -----Original Message-----
>> From: Linuxppc-dev [mailto:linuxppc-dev-
>> bounces+bharat.bhushan=freescale.com@lists.ozlabs.org] On Behalf Of Alexey
>> Kardashevskiy
>> Sent: Thursday, June 19, 2014 9:18 AM
>> To: Alex Williamson
>> Cc: kvm@vger.kernel.org; Nikunj A Dadhania; linux-kernel@vger.kernel.org;
>> Alexander Graf; linuxppc-dev@lists.ozlabs.org
>> Subject: Re: [PATCH] vfio: Fix endianness handling for emulated BARs
>>
>> On 06/19/2014 11:50 AM, Alexey Kardashevskiy wrote:
>>> On 06/19/2014 10:50 AM, Alexey Kardashevskiy wrote:
>>>> On 06/19/2014 04:35 AM, Alex Williamson wrote:
>>>>> On Wed, 2014-06-18 at 21:36 +1000, Alexey Kardashevskiy wrote:
>>>>>> VFIO exposes BARs to user space as a byte stream so userspace can
>>>>>> read it using pread()/pwrite(). Since this is a byte stream, VFIO
>>>>>> should not do byte swapping and simply return values as it gets
>>>>>> them from PCI device.
>>>>>>
>>>>>> Instead, the existing code assumes that byte stream in read/write
>>>>>> is little-endian and it fixes endianness for values which it passes
>>>>>> to ioreadXX/iowriteXX helpers. This works for little-endian as PCI
>>>>>> is little endian and le32_to_cpu/... are stubs.
>>>>>
>>>>> vfio read32:
>>>>>
>>>>> val = cpu_to_le32(ioread32(io + off));
>>>>>
>>>>> Where the typical x86 case, ioread32 is:
>>>>>
>>>>> #define ioread32(addr) readl(addr)
>>>>>
>>>>> and readl is:
>>>>>
>>>>> __le32_to_cpu(__raw_readl(addr));
>>>>>
>>>>> So we do canceling byte swaps, which are both nops on x86, and end
>>>>> up returning device endian, which we assume is little endian.
>>>>>
>>>>> vfio write32 is similar:
>>>>>
>>>>> iowrite32(le32_to_cpu(val), io + off);
>>>>>
>>>>> The implicit cpu_to_le32 of iowrite32() and our explicit swap cancel
>>>>> out, so input data is device endian, which is assumed little.
>>>>>
>>>>>> This also works for big endian but rather by an accident: it reads
>>>>>> 4 bytes from the stream (@val is big endian), converts to CPU
>>>>>> format (which should be big endian) as it was little endian (@val
>>>>>> becomes actually little
>>>>>> endian) and calls iowrite32() which does not do swapping on big
>>>>>> endian system.
>>>>>
>>>>> Really?
>>>>>
>>>>> In arch/powerpc/kernel/iomap.c iowrite32() is just a wrapper around
>>>>> writel(), which seems to use the generic implementation, which does
>>>>> include a cpu_to_le32.
>>>>
>>>>
>>>> Ouch, wrong comment. iowrite32() does swapping. My bad.
>>>>
>>>>
>>>>>
>>>>> I also see other big endian archs like parisc doing cpu_to_le32 on
>>>>> iowrite32, so I don't think this statement is true. I imagine it's
>>>>> probably working for you because the swap cancel.
>>>>>
>>>>>> This removes byte swapping and makes use ioread32be/iowrite32be
>>>>>> (and 16bit versions) on big-endian systems. The "be" helpers take
>>>>>> native endian values and do swapping at the moment of writing to a
>>>>>> PCI register using one of "store byte-reversed" instructions.
>>>>>
>>>>> So now you want iowrite32() on little endian and iowrite32be() on
>>>>> big endian, the former does a cpu_to_le32 (which is a nop on little
>>>>> endian) and the latter does a cpu_to_be32 (which is a nop on big endian)...
>>>>> should we just be using __raw_writel() on both?
>>>>
>>>>
>>>> We can do that too. The beauty of iowrite32be on ppc64 is that it
>>>> does not swap and write separately, it is implemented via the "Store
>>>> Word Byte-Reverse Indexed X-form" single instruction.
>>>>
>>>> And some archs (do not know which ones) may add memory barriers in
>>>> their implementations of ioread/iowrite. __raw_writel is too raw :)
>>>>
>>>>> There doesn't actually
>>>>> seem to be any change in behavior here, it just eliminates
>>>>> back-to-back byte swaps, which are a nop on x86, but not power, right?
>>>>
>>>> Exactly. No dependency for QEMU.
>>>
>>> How about that:
>>> ===
>>>
>>> VFIO exposes BARs to user space as a byte stream so userspace can read
>>> it using pread()/pwrite(). Since this is a byte stream, VFIO should
>>> not do byte swapping and simply return values as it gets them from PCI
>>> device.
>>>
>>> Instead, the existing code assumes that byte stream in read/write is
>>> little-endian and it fixes endianness for values which it passes to
>>> ioreadXX/iowriteXX helpers in native format. The IO helpers do
>>> swapping again. Since both byte swaps are nops on little-endian host, this
>> works.
>>>
>>> This also works for big endian but rather by an accident: it reads 4
>>> bytes from the stream (@val is big endian), converts to CPU format
>>> (which should be big endian) as it was little endian (and @val becomes
>>> actually little
>>> endian) and calls iowrite32() which does swapping on big endian system
>>> again. So byte swap gets cancelled, __raw_writel() receives a native
>>> value and then *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) =
>>> v; just does the right thing.
>>
>> I am wrong here, sorry. This is what happens when you watch soccer between 2am
>> and 4am :)
>>
>>
>>>
>>> This removes byte swaps and makes use of ioread32be/iowrite32be (and
>>> 16bit versions) which do explicit byte swapping at the moment of write
>>> to a PCI register. PPC64 uses a special "Store Word Byte-Reverse
>>> Indexed X-form" instruction which does swap and store.
>>
>> No swapping is done here if we use ioread32be as it calls in_be32 and that
>> animal does "lwz" which is simple load from memory.
>>
>> So @val (16/32 bit variable on stack) will have different values on LE and BE
>> but since we do not handle it the host and just memcpy it to the buffer, nothing
>> breaks here.
>>
>>
>> So it should be like this:
>> ===
>> VFIO exposes BARs to user space as a byte stream so userspace can read it using
>> pread()/pwrite(). Since this is a byte stream, VFIO should not do byte swapping
>> and simply return values as it gets them from PCI device and copy_to_user will
>> save bytes in the correct same true for writes.
>
> " copy_to_user will save bytes in the correct" ---? --- "same true for writes".
Oops. "correct order" is it.
>
> Thanks
> -Bharat
>
>>
>> Instead, the existing code assumes that byte stream in read/write is little-
>> endian and it fixes endianness for values which it passes to ioreadXX/iowriteXX
>> helpers in native format. The IO helpers do swapping again. Since both byte
>> swaps are nops on little-endian host, this works.
>
>>
>> This also works for big endian but rather by an accident: it reads 4 bytes from
>> the stream (@val is big endian), converts to CPU format (which should be big
>> endian) as it was little endian (and @val becomes actually little
>> endian) and calls iowrite32() which does swapping on big endian system again. So
>> byte swap in the host gets cancelled and __raw_writel() writes the value which
>> was swapped originally by the guest.
>>
>> This removes byte swaps and makes use of ioread32be/iowrite32be (and 16bit
>> versions) which do not do byte swap on BE hosts.
>> For LE hosts, ioread32/iowrite32 are still used.
>>
>> ===
>>
>>
>>> ===
>>>
>>> any better?
>>>
>>>
>>>
>>>
>>>>>> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>>>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>>>>> ---
>>>>>> drivers/vfio/pci/vfio_pci_rdwr.c | 20 ++++++++++++++++----
>>>>>> 1 file changed, 16 insertions(+), 4 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c
>>>>>> b/drivers/vfio/pci/vfio_pci_rdwr.c
>>>>>> index 210db24..f363b5a 100644
>>>>>> --- a/drivers/vfio/pci/vfio_pci_rdwr.c
>>>>>> +++ b/drivers/vfio/pci/vfio_pci_rdwr.c
>>>>>> @@ -21,6 +21,18 @@
>>>>>>
>>>>>> #include "vfio_pci_private.h"
>>>>>>
>>>>>> +#ifdef __BIG_ENDIAN__
>>>>>> +#define ioread16_native ioread16be
>>>>>> +#define ioread32_native ioread32be
>>>>>> +#define iowrite16_native iowrite16be
>>>>>> +#define iowrite32_native iowrite32be
>>>>>> +#else
>>>>>> +#define ioread16_native ioread16
>>>>>> +#define ioread32_native ioread32
>>>>>> +#define iowrite16_native iowrite16
>>>>>> +#define iowrite32_native iowrite32
>>>>>> +#endif
>>>>>> +
>>>>>> /*
>>>>>> * Read or write from an __iomem region (MMIO or I/O port) with an
>> excluded
>>>>>> * range which is inaccessible. The excluded range drops writes
>>>>>> and fills @@ -50,9 +62,9 @@ static ssize_t do_io_rw(void __iomem *io, char
>> __user *buf,
>>>>>> if (copy_from_user(&val, buf, 4))
>>>>>> return -EFAULT;
>>>>>>
>>>>>> - iowrite32(le32_to_cpu(val), io + off);
>>>>>> + iowrite32_native(val, io + off);
>>>>>> } else {
>>>>>> - val = cpu_to_le32(ioread32(io + off));
>>>>>> + val = ioread32_native(io + off);
>>>>>>
>>>>>> if (copy_to_user(buf, &val, 4))
>>>>>> return -EFAULT;
>>>>>> @@ -66,9 +78,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user
>> *buf,
>>>>>> if (copy_from_user(&val, buf, 2))
>>>>>> return -EFAULT;
>>>>>>
>>>>>> - iowrite16(le16_to_cpu(val), io + off);
>>>>>> + iowrite16_native(val, io + off);
>>>>>> } else {
>>>>>> - val = cpu_to_le16(ioread16(io + off));
>>>>>> + val = ioread16_native(io + off);
>>>>>>
>>>>>> if (copy_to_user(buf, &val, 2))
>>>>>> return -EFAULT;
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>> --
>> Alexey
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Alexey
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Mike Qiu @ 2014-06-19 5:49 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1403150108.4768.3.camel@concordia>
[-- Attachment #1: Type: text/plain, Size: 1400 bytes --]
Hi Michael,
The config file has attached ...
Thanks
Mike
On 06/19/2014 11:55 AM, Michael Ellerman wrote:
> On Thu, 2014-06-19 at 10:18 +0800, Mike Qiu wrote:
>> On 06/19/2014 09:32 AM, Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
>>>> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
>>>>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
>>>>>> Anyone has a idea on this issue?
>>>>> Did it ever work? If so which kernel version?
>>>> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
>>> What about 3.16-rc1 ?
>> 3.16-rc1 still not work. the same issue.
>>
>>>> The config file can be simply get from /boot/configxxx. and "make
>>>> menuconfig" and save without change anything(default).
>>> Sure, but I don't have access to your box so please ..
>> * OS address 9.3.110.192 root/linux123
>> * Minicom server: 9.3.191.26 root/linux123
>> o minicom -D /dev/ttyS0
>>
>> fsp: http://cena-fsp.austin.ibm.com
> Please change that password immediately, and don't EVER post the login details
> for a machine on a public list again.
>
> Also I'm not offering to logon to your machine and debug it, I'm giving you
> advice on how you can debug it.
>
> cheers
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
[-- Attachment #2: config_p --]
[-- Type: text/plain, Size: 119052 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 3.16.0-rc1 Kernel Configuration
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_CELL_CPU is not set
# CONFIG_POWER4_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
CONFIG_POWER7_CPU=y
CONFIG_PPC_BOOK3S=y
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_ICSWX=y
# CONFIG_PPC_ICSWX_PID is not set
# CONFIG_PPC_ICSWX_USE_SIGILL is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_PPC_DOORBELL=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
# CONFIG_GENERIC_CSUM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_EPAPR_BOOT=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_EMULATE_SSTEP=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_MEMCG_KMEM=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_XICS=y
CONFIG_PPC_ICP_NATIVE=y
CONFIG_PPC_ICP_HV=y
CONFIG_PPC_ICS_RTAS=y
CONFIG_PPC_SCOM=y
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_GE_FPGA is not set
#
# Platform support
#
CONFIG_PPC_POWERNV=y
CONFIG_PPC_POWERNV_RTAS=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_PSERIES_MSI=y
CONFIG_PSERIES_ENERGY=m
CONFIG_SCANLOG=y
CONFIG_IO_EVENT_IRQ=y
CONFIG_LPARCFG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=y
CONFIG_HV_PERF_CTRS=y
CONFIG_DTL=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_CELL_QPACE is not set
# CONFIG_PQ2ADS is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
CONFIG_EEH=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_P7_NAP=y
CONFIG_PPC_INDIRECT_PIO=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# PowerPC CPU frequency scaling drivers
#
CONFIG_POWERNV_CPUFREQ=y
#
# CPUIdle driver
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# POWERPC CPU Idle Drivers
#
CONFIG_PSERIES_CPUIDLE=y
CONFIG_POWERNV_CPUIDLE=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_FA_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_MEMORYLESS_NODES=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSWAP is not set
# CONFIG_ZSMALLOC is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_4K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PPC_DENORMALISATION=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
#
# PCI host controller drivers
#
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
CONFIG_NONSTATIC_KERNEL=y
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_ARCH_RANDOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_NF_NAT_IPV6 is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_6LOWPAN_IPHC=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=y
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
# CONFIG_BT_6LOWPAN is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_PN544 is not set
# CONFIG_NFC_MICROREAD is not set
# CONFIG_NFC_MRVL is not set
# CONFIG_NFC_ST21NFCA is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_PARPORT=m
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8172=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFSHCD_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVSCSIS=m
CONFIG_SCSI_IBMVFC=m
# CONFIG_SCSI_IBMVFC_TRACE is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_OF_PLATFORM=m
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_SWITCH is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_WINDFARM=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
# CONFIG_NET_TEAM_MODE_RANDOM is not set
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=m
CONFIG_NET_DSA_MV88E6123_61_65=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_IBM=y
CONFIG_IBMVETH=m
# CONFIG_IBM_EMAC_ZMII is not set
# CONFIG_IBM_EMAC_RGMII is not set
# CONFIG_IBM_EMAC_TAH is not set
# CONFIG_IBM_EMAC_EMAC4 is not set
# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
CONFIG_EHEA=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
# CONFIG_SFC_MTD is not set
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
CONFIG_AMD_PHY=m
# CONFIG_AMD_XGBE_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not set
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
# CONFIG_ATH_CARDS is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
# CONFIG_IWLMVM is not set
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
CONFIG_RT2800USB_RT53XX=y
# CONFIG_RT2800USB_RT55XX is not set
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
# CONFIG_WL_TI is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_OF_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_OLD_HVSI is not set
CONFIG_HVC_OPAL=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IBM_BSR=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_PSERIES=m
CONFIG_HW_RANDOM_POWERNV=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_BCM_KONA is not set
#
# USB GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_ALIM7101_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_MEN_A21_WDT is not set
CONFIG_WATCHDOG_RTAS=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65912 is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_IGUANA=m
# CONFIG_IR_TTUSBIR is not set
# CONFIG_IR_IMG is not set
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_SH_VEU is not set
# CONFIG_VIDEO_RENESAS_VSP1 is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
# CONFIG_USB_SI4713 is not set
# CONFIG_PLATFORM_SI4713 is not set
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
# CONFIG_CYPRESS_FIRMWARE is not set
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
#
# Multistandard (satellite) frontends
#
#
# Multistandard (cable + terrestrial) frontends
#
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
#
# ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
#
# SEC control devices for DVB-S
#
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_UMS is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not set
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=4096
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
# CONFIG_SND_SCS1X is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO_TPKBD=m
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_ZTE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
# CONFIG_MMC_SDHCI_OF_HLWD is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_EHCA=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
# CONFIG_MLX5_INFINIBAND is not set
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_INFINIBAND_ISERT is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_CPC925=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_HYM8563 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_FSL_EDMA is not set
CONFIG_DMA_OF=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8192EE is not set
# CONFIG_R8723AU is not set
# CONFIG_R8821AE is not set
# CONFIG_RTS5208 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
CONFIG_CRYSTALHD=m
# CONFIG_FB_XGI is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_I2C_BCM2048 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_SOLO6X10 is not set
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_ZILOG=m
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_XILLYBUS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Hardware Spinlock drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
# CONFIG_SPAPR_TCE_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
# CONFIG_NFS_V4_2 is not set
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_V4_SECURITY_LABEL is not set
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m
CONFIG_SUNRPC_XPRT_RDMA_SERVER=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
# CONFIG_CEPH_FS_POSIX_ACL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
# CONFIG_CRC64_ECMA is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=m
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_MODULE is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_HCALL_STATS is not set
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_NX is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_HV_POSSIBLE=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
# CONFIG_KVM_BOOK3S_64_PR is not set
# CONFIG_KVM_XICS is not set
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Mike Qiu @ 2014-06-19 5:33 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1403150108.4768.3.camel@concordia>
On 06/19/2014 11:55 AM, Michael Ellerman wrote:
> On Thu, 2014-06-19 at 10:18 +0800, Mike Qiu wrote:
>> On 06/19/2014 09:32 AM, Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
>>>> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
>>>>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
>>>>>> Anyone has a idea on this issue?
>>>>> Did it ever work? If so which kernel version?
>>>> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
>>> What about 3.16-rc1 ?
>> 3.16-rc1 still not work. the same issue.
>>
>>>> The config file can be simply get from /boot/configxxx. and "make
>>>> menuconfig" and save without change anything(default).
>>> Sure, but I don't have access to your box so please ..
>> * OS address 9.3.110.192 root/linux123
>> * Minicom server: 9.3.191.26 root/linux123
>> o minicom -D /dev/ttyS0
>>
>> fsp: http://cena-fsp.austin.ibm.com
> Please change that password immediately, and don't EVER post the login details
> for a machine on a public list again.
>
> Also I'm not offering to logon to your machine and debug it, I'm giving you
> advice on how you can debug it.
...OK, got it, my mistake...
Thanks
Mike
>
> cheers
>
>
>
^ permalink raw reply
* RE: [PATCH] vfio: Fix endianness handling for emulated BARs
From: Bharat.Bhushan @ 2014-06-19 5:30 UTC (permalink / raw)
To: Alexey Kardashevskiy, Alex Williamson
Cc: Alexander Graf, linuxppc-dev@lists.ozlabs.org, Nikunj A Dadhania,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
In-Reply-To: <53A25D74.5000804@ozlabs.ru>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^ permalink raw reply
* Re: [RFT PATCH -next v3] [BUGFIX] kprobes: Fix "Failed to find blacklist" error on ia64 and ppc64
From: Masami Hiramatsu @ 2014-06-19 4:52 UTC (permalink / raw)
To: Michael Ellerman
Cc: Jeremy Fitzhardinge, linux-ia64, sparse,
Linux Kernel Mailing List, Paul Mackerras, H. Peter Anvin,
Thomas Gleixner, linux-tip-commits, anil.s.keshavamurthy,
Ingo Molnar, Suzuki K. Poulose, Fenghua Yu, Arnd Bergmann,
Rusty Russell, Chris Wright, yrl.pp-manager.tt, akataria,
Tony Luck, Kevin Hao, linuxppc-dev, rdunlap, Tony Luck, dl9pf,
Andrew Morton, Linus Torvalds, David S. Miller
In-Reply-To: <1403141433.4768.1.camel@concordia>
(2014/06/19 10:30), Michael Ellerman wrote:
> On Wed, 2014-06-18 at 17:46 +0900, Masami Hiramatsu wrote:
>> (2014/06/18 16:56), Michael Ellerman wrote:
>>> On Fri, 2014-06-06 at 15:38 +0900, Masami Hiramatsu wrote:
>>>> Ping?
>>>>
>>>> I guess this should go to 3.16 branch, shouldn't it?
>>>
>>>>> diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
>>>>> index bfb6ded..8b89d65 100644
>>>>> --- a/arch/powerpc/include/asm/types.h
>>>>> +++ b/arch/powerpc/include/asm/types.h
>>>>> @@ -25,6 +25,17 @@ typedef struct {
>>>>> unsigned long env;
>>>>> } func_descr_t;
>>>>>
>>>>> +#if defined(CONFIG_PPC64) && (!defined(_CALL_ELF) || _CALL_ELF == 1)
>>>>> +/*
>>>>> + * On PPC64 ABIv1 the function pointer actually points to the
>>>>> + * function's descriptor. The first entry in the descriptor is the
>>>>> + * address of the function text.
>>>>> + */
>>>>> +#define function_entry(fn) (((func_descr_t *)(fn))->entry)
>>>>> +#else
>>>>> +#define function_entry(fn) ((unsigned long)(fn))
>>>>> +#endif
>>>
>>> We already have ppc_function_entry(), can't you use that?
>>
>> I'd like to ask you whether the address which ppc_function_entry() returns on
>> PPC ABIv2 is really same address in kallsyms or not.
>> As you can see, kprobes uses function_entry() to get the actual entry address
>> where kallsyms knows. I have not much information about that, but it seems that
>> the "global entry point" is the address which kallsyms knows, isn't it?
>
> OK. I'm not sure off the top of my head which address kallsyms knows about, but
> yes it's likely that it is the global entry point.
>
> I recently sent a patch to add ppc_global_function_entry(), because we need it
> in the ftrace code. Once that is merged you could use that.
Yeah, I could use that. But since this is used in arch-independent code (e.g. IA64
needs similar macro), I think we'd better define function_entry() in asm/types.h for
general use (for kallsyms), and rename ppc_function_entry to local_function_entry()
in asm/code-patching.h.
> How do you hit the original problem, you don't actually specify in your commit
> message? Something with kprobes obviously, but what exactly? I'll try and
> reproduce it here.
Ah, those messages should be shown in dmesg when booting if it doesn't work,
because the messages are printed by initialization process of kprobe blacklist.
So, reproducing it is just enabling CONFIG_KPROBES and boot it.
Thank you,
--
Masami HIRAMATSU
Software Platform Research Dept. Linux Technology Research Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Michael Ellerman @ 2014-06-19 3:55 UTC (permalink / raw)
To: Mike Qiu; +Cc: linuxppc-dev
In-Reply-To: <53A2488A.1060507@linux.vnet.ibm.com>
On Thu, 2014-06-19 at 10:18 +0800, Mike Qiu wrote:
> On 06/19/2014 09:32 AM, Michael Ellerman wrote:
> > On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
> >> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
> >>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
> >>>> Anyone has a idea on this issue?
> >>> Did it ever work? If so which kernel version?
> >> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
> > What about 3.16-rc1 ?
>
> 3.16-rc1 still not work. the same issue.
>
> >> The config file can be simply get from /boot/configxxx. and "make
> >> menuconfig" and save without change anything(default).
> > Sure, but I don't have access to your box so please ..
>
> * OS address 9.3.110.192 root/linux123
> * Minicom server: 9.3.191.26 root/linux123
> o minicom -D /dev/ttyS0
>
> fsp: http://cena-fsp.austin.ibm.com
Please change that password immediately, and don't EVER post the login details
for a machine on a public list again.
Also I'm not offering to logon to your machine and debug it, I'm giving you
advice on how you can debug it.
cheers
^ permalink raw reply
* Re: [PATCH] vfio: Fix endianness handling for emulated BARs
From: Alexey Kardashevskiy @ 2014-06-19 3:48 UTC (permalink / raw)
To: Alex Williamson
Cc: kvm, Nikunj A Dadhania, linux-kernel, Alexander Graf,
linuxppc-dev
In-Reply-To: <53A241F6.9010307@ozlabs.ru>
On 06/19/2014 11:50 AM, Alexey Kardashevskiy wrote:
> On 06/19/2014 10:50 AM, Alexey Kardashevskiy wrote:
>> On 06/19/2014 04:35 AM, Alex Williamson wrote:
>>> On Wed, 2014-06-18 at 21:36 +1000, Alexey Kardashevskiy wrote:
>>>> VFIO exposes BARs to user space as a byte stream so userspace can
>>>> read it using pread()/pwrite(). Since this is a byte stream, VFIO should
>>>> not do byte swapping and simply return values as it gets them from
>>>> PCI device.
>>>>
>>>> Instead, the existing code assumes that byte stream in read/write is
>>>> little-endian and it fixes endianness for values which it passes to
>>>> ioreadXX/iowriteXX helpers. This works for little-endian as PCI is
>>>> little endian and le32_to_cpu/... are stubs.
>>>
>>> vfio read32:
>>>
>>> val = cpu_to_le32(ioread32(io + off));
>>>
>>> Where the typical x86 case, ioread32 is:
>>>
>>> #define ioread32(addr) readl(addr)
>>>
>>> and readl is:
>>>
>>> __le32_to_cpu(__raw_readl(addr));
>>>
>>> So we do canceling byte swaps, which are both nops on x86, and end up
>>> returning device endian, which we assume is little endian.
>>>
>>> vfio write32 is similar:
>>>
>>> iowrite32(le32_to_cpu(val), io + off);
>>>
>>> The implicit cpu_to_le32 of iowrite32() and our explicit swap cancel
>>> out, so input data is device endian, which is assumed little.
>>>
>>>> This also works for big endian but rather by an accident: it reads 4 bytes
>>>> from the stream (@val is big endian), converts to CPU format (which should
>>>> be big endian) as it was little endian (@val becomes actually little
>>>> endian) and calls iowrite32() which does not do swapping on big endian
>>>> system.
>>>
>>> Really?
>>>
>>> In arch/powerpc/kernel/iomap.c iowrite32() is just a wrapper around
>>> writel(), which seems to use the generic implementation, which does
>>> include a cpu_to_le32.
>>
>>
>> Ouch, wrong comment. iowrite32() does swapping. My bad.
>>
>>
>>>
>>> I also see other big endian archs like parisc doing cpu_to_le32 on
>>> iowrite32, so I don't think this statement is true. I imagine it's
>>> probably working for you because the swap cancel.
>>>
>>>> This removes byte swapping and makes use ioread32be/iowrite32be
>>>> (and 16bit versions) on big-endian systems. The "be" helpers take
>>>> native endian values and do swapping at the moment of writing to a PCI
>>>> register using one of "store byte-reversed" instructions.
>>>
>>> So now you want iowrite32() on little endian and iowrite32be() on big
>>> endian, the former does a cpu_to_le32 (which is a nop on little endian)
>>> and the latter does a cpu_to_be32 (which is a nop on big endian)...
>>> should we just be using __raw_writel() on both?
>>
>>
>> We can do that too. The beauty of iowrite32be on ppc64 is that it does not
>> swap and write separately, it is implemented via the "Store Word
>> Byte-Reverse Indexed X-form" single instruction.
>>
>> And some archs (do not know which ones) may add memory barriers in their
>> implementations of ioread/iowrite. __raw_writel is too raw :)
>>
>>> There doesn't actually
>>> seem to be any change in behavior here, it just eliminates back-to-back
>>> byte swaps, which are a nop on x86, but not power, right?
>>
>> Exactly. No dependency for QEMU.
>
> How about that:
> ===
>
> VFIO exposes BARs to user space as a byte stream so userspace can
> read it using pread()/pwrite(). Since this is a byte stream, VFIO should
> not do byte swapping and simply return values as it gets them from
> PCI device.
>
> Instead, the existing code assumes that byte stream in read/write is
> little-endian and it fixes endianness for values which it passes to
> ioreadXX/iowriteXX helpers in native format. The IO helpers do swapping
> again. Since both byte swaps are nops on little-endian host, this works.
>
> This also works for big endian but rather by an accident: it reads 4 bytes
> from the stream (@val is big endian), converts to CPU format (which should
> be big endian) as it was little endian (and @val becomes actually little
> endian) and calls iowrite32() which does swapping on big endian
> system again. So byte swap gets cancelled, __raw_writel() receives
> a native value and then
> *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
> just does the right thing.
I am wrong here, sorry. This is what happens when you watch soccer between
2am and 4am :)
>
> This removes byte swaps and makes use of ioread32be/iowrite32be
> (and 16bit versions) which do explicit byte swapping at the moment
> of write to a PCI register. PPC64 uses a special "Store Word
> Byte-Reverse Indexed X-form" instruction which does swap and store.
No swapping is done here if we use ioread32be as it calls in_be32 and that
animal does "lwz" which is simple load from memory.
So @val (16/32 bit variable on stack) will have different values on LE and
BE but since we do not handle it the host and just memcpy it to the buffer,
nothing breaks here.
So it should be like this:
===
VFIO exposes BARs to user space as a byte stream so userspace can
read it using pread()/pwrite(). Since this is a byte stream, VFIO should
not do byte swapping and simply return values as it gets them from
PCI device and copy_to_user will save bytes in the correct
same true for writes.
Instead, the existing code assumes that byte stream in read/write is
little-endian and it fixes endianness for values which it passes to
ioreadXX/iowriteXX helpers in native format. The IO helpers do swapping
again. Since both byte swaps are nops on little-endian host, this works.
This also works for big endian but rather by an accident: it reads 4 bytes
from the stream (@val is big endian), converts to CPU format (which should
be big endian) as it was little endian (and @val becomes actually little
endian) and calls iowrite32() which does swapping on big endian
system again. So byte swap in the host gets cancelled and __raw_writel()
writes the value which was swapped originally by the guest.
This removes byte swaps and makes use of ioread32be/iowrite32be
(and 16bit versions) which do not do byte swap on BE hosts.
For LE hosts, ioread32/iowrite32 are still used.
===
> ===
>
> any better?
>
>
>
>
>>>> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>>> ---
>>>> drivers/vfio/pci/vfio_pci_rdwr.c | 20 ++++++++++++++++----
>>>> 1 file changed, 16 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c
>>>> index 210db24..f363b5a 100644
>>>> --- a/drivers/vfio/pci/vfio_pci_rdwr.c
>>>> +++ b/drivers/vfio/pci/vfio_pci_rdwr.c
>>>> @@ -21,6 +21,18 @@
>>>>
>>>> #include "vfio_pci_private.h"
>>>>
>>>> +#ifdef __BIG_ENDIAN__
>>>> +#define ioread16_native ioread16be
>>>> +#define ioread32_native ioread32be
>>>> +#define iowrite16_native iowrite16be
>>>> +#define iowrite32_native iowrite32be
>>>> +#else
>>>> +#define ioread16_native ioread16
>>>> +#define ioread32_native ioread32
>>>> +#define iowrite16_native iowrite16
>>>> +#define iowrite32_native iowrite32
>>>> +#endif
>>>> +
>>>> /*
>>>> * Read or write from an __iomem region (MMIO or I/O port) with an excluded
>>>> * range which is inaccessible. The excluded range drops writes and fills
>>>> @@ -50,9 +62,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>>> if (copy_from_user(&val, buf, 4))
>>>> return -EFAULT;
>>>>
>>>> - iowrite32(le32_to_cpu(val), io + off);
>>>> + iowrite32_native(val, io + off);
>>>> } else {
>>>> - val = cpu_to_le32(ioread32(io + off));
>>>> + val = ioread32_native(io + off);
>>>>
>>>> if (copy_to_user(buf, &val, 4))
>>>> return -EFAULT;
>>>> @@ -66,9 +78,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>>> if (copy_from_user(&val, buf, 2))
>>>> return -EFAULT;
>>>>
>>>> - iowrite16(le16_to_cpu(val), io + off);
>>>> + iowrite16_native(val, io + off);
>>>> } else {
>>>> - val = cpu_to_le16(ioread16(io + off));
>>>> + val = ioread16_native(io + off);
>>>>
>>>> if (copy_to_user(buf, &val, 2))
>>>> return -EFAULT;
>>>
>>>
>>>
>>
>>
>
>
--
Alexey
^ permalink raw reply
* Re: [RFC PATCH V3 14/17] ppc/pci: create/release dev-tree node for VFs
From: Wei Yang @ 2014-06-19 2:46 UTC (permalink / raw)
To: Grant Likely
Cc: Wei Yang, Benjamin Herrenschmidt, linux-pci@vger.kernel.org,
gwshan, Mike Qiu, Bjorn Helgaas, yan,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <CACxGe6v6Rdd=GQ8qR5LQ64NThidn7kn3WkKFkOXOsNuWq75D-A@mail.gmail.com>
On Wed, Jun 18, 2014 at 07:26:27PM +0100, Grant Likely wrote:
>On Tue, Jun 10, 2014 at 2:56 AM, Wei Yang <weiyang@linux.vnet.ibm.com> wrote:
>> Currently, powernv platform is not aware of VFs. This means no dev-node
>> represents a VF. Also, VF PCI device is created when PF driver want to enable
>> it. This leads to the pdn->pdev and pdn->pe_number an invalid value.
>>
>> This patch create/release dev-node for VF and fixs this when a VF's pci_dev
>> is created.
>>
>> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>
>I don't think this is the right way to handle this. Unless it is a
>fixup to a buggy devicetree provided by firmware, I don't want to see
>any code modifying the devicetree to describe stuff that is able to be
>directly enumerated. Really the pci code should handle the lack of a
>device_node gracefully. If it cannot then it should be fixed.
Grant,
Glad to see your comment.
I will fix this in the firmware.
>
>g.
>
>> ---
>> arch/powerpc/platforms/powernv/Kconfig | 1 +
>> arch/powerpc/platforms/powernv/pci-ioda.c | 103 +++++++++++++++++++++++++++++
>> arch/powerpc/platforms/powernv/pci.c | 20 ++++++
>> 3 files changed, 124 insertions(+)
>>
>> diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
>> index 895e8a2..0dd331b 100644
>> --- a/arch/powerpc/platforms/powernv/Kconfig
>> +++ b/arch/powerpc/platforms/powernv/Kconfig
>> @@ -11,6 +11,7 @@ config PPC_POWERNV
>> select PPC_UDBG_16550
>> select PPC_SCOM
>> select ARCH_RANDOM
>> + select OF_DYNAMIC
>> default y
>>
>> config PPC_POWERNV_RTAS
>> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>> index e46c5bf..9ace027 100644
>> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
>> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>> @@ -23,6 +23,7 @@
>> #include <linux/io.h>
>> #include <linux/msi.h>
>> #include <linux/memblock.h>
>> +#include <linux/of_pci.h>
>>
>> #include <asm/sections.h>
>> #include <asm/io.h>
>> @@ -771,6 +772,108 @@ static void pnv_pci_ioda_setup_PEs(void)
>> }
>> }
>>
>> +#ifdef CONFIG_PCI_IOV
>> +static void pnv_pci_create_vf_node(struct pci_dev *dev, u16 vf_num)
>> +{
>> + struct device_node *dn, *p_dn;
>> + struct pci_dn *pdn;
>> + struct pci_controller *hose;
>> + struct property *pp;
>> + void* value;
>> + u16 id;
>> +
>> + hose = pci_bus_to_host(dev->bus);
>> +
>> + /* Create dev-tree node for VFs if this is a PF */
>> + p_dn = pci_bus_to_OF_node(dev->bus);
>> + if (p_dn == NULL) {
>> + dev_err(&dev->dev, "SRIOV: VF bus NULL device node\n");
>> + return;
>> + }
>> +
>> + for (id = 0; id < vf_num; id++) {
>> + dn = kzalloc(sizeof(*dn), GFP_KERNEL);
>> + pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
>> + pp = kzalloc(sizeof(*pp), GFP_KERNEL);
>> + value = kzalloc(sizeof(u32), GFP_KERNEL);
>> +
>> + if (!dn || !pdn || !pp || !value) {
>> + kfree(dn);
>> + kfree(pdn);
>> + kfree(pp);
>> + kfree(value);
>> + dev_warn(&dev->dev, "%s: failed to create"
>> + "dev-tree node for idx(%d)\n",
>> + __func__, id);
>> +
>> + break;
>> + }
>> +
>> + pp->value = value;
>> + pdn->node = dn;
>> + pdn->devfn = pci_iov_virtfn_devfn(dev, id);
>> + pdn->busno = dev->bus->number;
>> + pdn->pe_number = IODA_INVALID_PE;
>> + pdn->phb = hose;
>> +
>> + dn->data = pdn;
>> + kref_init(&dn->kref);
>> + dn->full_name = dn->name =
>> + kasprintf(GFP_KERNEL, "%s/vf%d",
>> + p_dn->full_name, pdn->devfn);
>> + dn->parent = p_dn;
>> +
>> + pp->name = kasprintf(GFP_KERNEL, "reg");
>> + pp->length = 5 * sizeof(__be32);
>> + *(u32*)pp->value = cpu_to_be32(pdn->devfn) << 8;
>> + dn->properties = pp;
>> +
>> + of_attach_node(dn);
>> + }
>> +}
>> +
>> +static void pnv_pci_release_vf_node(struct pci_dev *dev, u16 vf_num)
>> +{
>> + struct device_node *dn;
>> + struct property *pp;
>> + u16 id;
>> +
>> + for (id = 0; id < vf_num; id++) {
>> + dn = of_pci_find_child_device(dev->bus->dev.of_node,
>> + pci_iov_virtfn_devfn(dev, id));
>> + if (!dn)
>> + continue;
>> +
>> + of_detach_node(dn);
>> + pp = dn->properties;
>> + kfree(pp->name);
>> + kfree(pp->value);
>> + kfree(pp);
>> + kfree(dn->data);
>> + kfree(dn);
>> + }
>> +}
>> +
>> +int pcibios_sriov_disable(struct pci_dev *pdev)
>> +{
>> + struct pci_sriov *iov;
>> + u16 vf_num;
>> +
>> + iov = pdev->sriov;
>> + vf_num = iov->num_VFs;
>> + pnv_pci_release_vf_node(pdev, vf_num);
>> +
>> + return 0;
>> +}
>> +
>> +int pcibios_sriov_enable(struct pci_dev *pdev, u16 vf_num)
>> +{
>> + pnv_pci_create_vf_node(pdev, vf_num);
>> +
>> + return 0;
>> +}
>> +#endif /* CONFIG_PCI_IOV */
>> +
>> static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
>> {
>> struct pci_dn *pdn = pci_get_pdn(pdev);
>> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
>> index 687a068..43fcc73 100644
>> --- a/arch/powerpc/platforms/powernv/pci.c
>> +++ b/arch/powerpc/platforms/powernv/pci.c
>> @@ -654,6 +654,26 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
>> {
>> struct pci_controller *hose = pci_bus_to_host(pdev->bus);
>> struct pnv_phb *phb = hose->private_data;
>> +#ifdef CONFIG_PCI_IOV
>> + struct pnv_ioda_pe *pe;
>> + struct pci_dn *pdn;
>> +
>> + /* Fix the VF pdn PE number */
>> + if (pdev->is_virtfn) {
>> + pdn = pci_get_pdn(pdev);
>> + if (pdn->pcidev == NULL || pdn->pe_number == IODA_INVALID_PE) {
>> + list_for_each_entry(pe, &phb->ioda.pe_list, list) {
>> + if (pe->rid ==
>> + ((pdev->bus->number << 8) | (pdev->devfn & 0xff))) {
>> + pdn->pcidev = pdev;
>> + pdn->pe_number = pe->pe_number;
>> + pe->pdev = pdev;
>> + break;
>> + }
>> + }
>> + }
>> + }
>> +#endif /* CONFIG_PCI_IOV */
>>
>> /* If we have no phb structure, try to setup a fallback based on
>> * the device-tree (RTAS PCI for example)
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Richard Yang
Help you, Help me
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Mike Qiu @ 2014-06-19 2:22 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1403141538.4768.2.camel@concordia>
On 06/19/2014 09:32 AM, Michael Ellerman wrote:
> On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
>> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
>>>> Anyone has a idea on this issue?
>>> Did it ever work? If so which kernel version?
>> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
> What about 3.16-rc1 ?
>
>> The config file can be simply get from /boot/configxxx. and "make
>> menuconfig" and save without change anything(default).
> Sure, but I don't have access to your box so please ..
>
>>> Can you attach your actual .config.
The linux-next is in "/home/mike/linux-next"
> ^^^^
>
>>> You could try building without CONFIG_PPC_POWERNV.
>> Trying...., but it should work as default config from /boot/
> Well yes that would be nice, but I'm trying to help you narrow down what the
> problem is.
>
> cheers
>
>
>
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Mike Qiu @ 2014-06-19 2:20 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1403141538.4768.2.camel@concordia>
On 06/19/2014 09:32 AM, Michael Ellerman wrote:
> On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
>> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
>>>> Anyone has a idea on this issue?
>>> Did it ever work? If so which kernel version?
>> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
> What about 3.16-rc1 ?
>
>> The config file can be simply get from /boot/configxxx. and "make
>> menuconfig" and save without change anything(default).
> Sure, but I don't have access to your box so please ..
>
>>> Can you attach your actual .config.
> ^^^^
>
>>> You could try building without CONFIG_PPC_POWERNV.
>> Trying...., but it should work as default config from /boot/
> Well yes that would be nice, but I'm trying to help you narrow down what the
> problem is.
When boot, pls select the "P3-D1" in the menu
Thanks
Mike
>
> cheers
>
>
>
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Mike Qiu @ 2014-06-19 2:18 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1403141538.4768.2.camel@concordia>
On 06/19/2014 09:32 AM, Michael Ellerman wrote:
> On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
>> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
>>> On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
>>>> Anyone has a idea on this issue?
>>> Did it ever work? If so which kernel version?
>> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
> What about 3.16-rc1 ?
>
3.16-rc1 still not work. the same issue.
>> The config file can be simply get from /boot/configxxx. and "make
>> menuconfig" and save without change anything(default).
> Sure, but I don't have access to your box so please ..
* OS address 9.3.110.192 root/linux123
* Minicom server: 9.3.191.26 root/linux123
o minicom -D /dev/ttyS0
fsp: http://cena-fsp.austin.ibm.com
>
>>> Can you attach your actual .config.
> ^^^^
>
>>> You could try building without CONFIG_PPC_POWERNV.
>> Trying...., but it should work as default config from /boot/
> Well yes that would be nice, but I'm trying to help you narrow down what the
> problem is.
Great thanks
Mike
> cheers
>
>
>
^ permalink raw reply
* Re: [PATCH] vfio: Fix endianness handling for emulated BARs
From: Alexey Kardashevskiy @ 2014-06-19 1:50 UTC (permalink / raw)
To: Alex Williamson
Cc: kvm, Nikunj A Dadhania, linux-kernel, Alexander Graf,
linuxppc-dev
In-Reply-To: <53A233E9.6030006@ozlabs.ru>
On 06/19/2014 10:50 AM, Alexey Kardashevskiy wrote:
> On 06/19/2014 04:35 AM, Alex Williamson wrote:
>> On Wed, 2014-06-18 at 21:36 +1000, Alexey Kardashevskiy wrote:
>>> VFIO exposes BARs to user space as a byte stream so userspace can
>>> read it using pread()/pwrite(). Since this is a byte stream, VFIO should
>>> not do byte swapping and simply return values as it gets them from
>>> PCI device.
>>>
>>> Instead, the existing code assumes that byte stream in read/write is
>>> little-endian and it fixes endianness for values which it passes to
>>> ioreadXX/iowriteXX helpers. This works for little-endian as PCI is
>>> little endian and le32_to_cpu/... are stubs.
>>
>> vfio read32:
>>
>> val = cpu_to_le32(ioread32(io + off));
>>
>> Where the typical x86 case, ioread32 is:
>>
>> #define ioread32(addr) readl(addr)
>>
>> and readl is:
>>
>> __le32_to_cpu(__raw_readl(addr));
>>
>> So we do canceling byte swaps, which are both nops on x86, and end up
>> returning device endian, which we assume is little endian.
>>
>> vfio write32 is similar:
>>
>> iowrite32(le32_to_cpu(val), io + off);
>>
>> The implicit cpu_to_le32 of iowrite32() and our explicit swap cancel
>> out, so input data is device endian, which is assumed little.
>>
>>> This also works for big endian but rather by an accident: it reads 4 bytes
>>> from the stream (@val is big endian), converts to CPU format (which should
>>> be big endian) as it was little endian (@val becomes actually little
>>> endian) and calls iowrite32() which does not do swapping on big endian
>>> system.
>>
>> Really?
>>
>> In arch/powerpc/kernel/iomap.c iowrite32() is just a wrapper around
>> writel(), which seems to use the generic implementation, which does
>> include a cpu_to_le32.
>
>
> Ouch, wrong comment. iowrite32() does swapping. My bad.
>
>
>>
>> I also see other big endian archs like parisc doing cpu_to_le32 on
>> iowrite32, so I don't think this statement is true. I imagine it's
>> probably working for you because the swap cancel.
>>
>>> This removes byte swapping and makes use ioread32be/iowrite32be
>>> (and 16bit versions) on big-endian systems. The "be" helpers take
>>> native endian values and do swapping at the moment of writing to a PCI
>>> register using one of "store byte-reversed" instructions.
>>
>> So now you want iowrite32() on little endian and iowrite32be() on big
>> endian, the former does a cpu_to_le32 (which is a nop on little endian)
>> and the latter does a cpu_to_be32 (which is a nop on big endian)...
>> should we just be using __raw_writel() on both?
>
>
> We can do that too. The beauty of iowrite32be on ppc64 is that it does not
> swap and write separately, it is implemented via the "Store Word
> Byte-Reverse Indexed X-form" single instruction.
>
> And some archs (do not know which ones) may add memory barriers in their
> implementations of ioread/iowrite. __raw_writel is too raw :)
>
>> There doesn't actually
>> seem to be any change in behavior here, it just eliminates back-to-back
>> byte swaps, which are a nop on x86, but not power, right?
>
> Exactly. No dependency for QEMU.
How about that:
===
VFIO exposes BARs to user space as a byte stream so userspace can
read it using pread()/pwrite(). Since this is a byte stream, VFIO should
not do byte swapping and simply return values as it gets them from
PCI device.
Instead, the existing code assumes that byte stream in read/write is
little-endian and it fixes endianness for values which it passes to
ioreadXX/iowriteXX helpers in native format. The IO helpers do swapping
again. Since both byte swaps are nops on little-endian host, this works.
This also works for big endian but rather by an accident: it reads 4 bytes
from the stream (@val is big endian), converts to CPU format (which should
be big endian) as it was little endian (and @val becomes actually little
endian) and calls iowrite32() which does swapping on big endian
system again. So byte swap gets cancelled, __raw_writel() receives
a native value and then
*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
just does the right thing.
This removes byte swaps and makes use of ioread32be/iowrite32be
(and 16bit versions) which do explicit byte swapping at the moment
of write to a PCI register. PPC64 uses a special "Store Word
Byte-Reverse Indexed X-form" instruction which does swap and store.
===
any better?
>>> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>> ---
>>> drivers/vfio/pci/vfio_pci_rdwr.c | 20 ++++++++++++++++----
>>> 1 file changed, 16 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c
>>> index 210db24..f363b5a 100644
>>> --- a/drivers/vfio/pci/vfio_pci_rdwr.c
>>> +++ b/drivers/vfio/pci/vfio_pci_rdwr.c
>>> @@ -21,6 +21,18 @@
>>>
>>> #include "vfio_pci_private.h"
>>>
>>> +#ifdef __BIG_ENDIAN__
>>> +#define ioread16_native ioread16be
>>> +#define ioread32_native ioread32be
>>> +#define iowrite16_native iowrite16be
>>> +#define iowrite32_native iowrite32be
>>> +#else
>>> +#define ioread16_native ioread16
>>> +#define ioread32_native ioread32
>>> +#define iowrite16_native iowrite16
>>> +#define iowrite32_native iowrite32
>>> +#endif
>>> +
>>> /*
>>> * Read or write from an __iomem region (MMIO or I/O port) with an excluded
>>> * range which is inaccessible. The excluded range drops writes and fills
>>> @@ -50,9 +62,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>> if (copy_from_user(&val, buf, 4))
>>> return -EFAULT;
>>>
>>> - iowrite32(le32_to_cpu(val), io + off);
>>> + iowrite32_native(val, io + off);
>>> } else {
>>> - val = cpu_to_le32(ioread32(io + off));
>>> + val = ioread32_native(io + off);
>>>
>>> if (copy_to_user(buf, &val, 4))
>>> return -EFAULT;
>>> @@ -66,9 +78,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>> if (copy_from_user(&val, buf, 2))
>>> return -EFAULT;
>>>
>>> - iowrite16(le16_to_cpu(val), io + off);
>>> + iowrite16_native(val, io + off);
>>> } else {
>>> - val = cpu_to_le16(ioread16(io + off));
>>> + val = ioread16_native(io + off);
>>>
>>> if (copy_to_user(buf, &val, 2))
>>> return -EFAULT;
>>
>>
>>
>
>
--
Alexey
^ permalink raw reply
* Re: [PATCH] vfio: Fix endianness handling for emulated BARs
From: Alexey Kardashevskiy @ 2014-06-19 1:50 UTC (permalink / raw)
To: Alex Williamson
Cc: kvm, Nikunj A Dadhania, linux-kernel, Alexander Graf,
linuxppc-dev
In-Reply-To: <53A233E9.6030006@ozlabs.ru>
On 06/19/2014 10:50 AM, Alexey Kardashevskiy wrote:
> On 06/19/2014 04:35 AM, Alex Williamson wrote:
>> On Wed, 2014-06-18 at 21:36 +1000, Alexey Kardashevskiy wrote:
>>> VFIO exposes BARs to user space as a byte stream so userspace can
>>> read it using pread()/pwrite(). Since this is a byte stream, VFIO should
>>> not do byte swapping and simply return values as it gets them from
>>> PCI device.
>>>
>>> Instead, the existing code assumes that byte stream in read/write is
>>> little-endian and it fixes endianness for values which it passes to
>>> ioreadXX/iowriteXX helpers. This works for little-endian as PCI is
>>> little endian and le32_to_cpu/... are stubs.
>>
>> vfio read32:
>>
>> val = cpu_to_le32(ioread32(io + off));
>>
>> Where the typical x86 case, ioread32 is:
>>
>> #define ioread32(addr) readl(addr)
>>
>> and readl is:
>>
>> __le32_to_cpu(__raw_readl(addr));
>>
>> So we do canceling byte swaps, which are both nops on x86, and end up
>> returning device endian, which we assume is little endian.
>>
>> vfio write32 is similar:
>>
>> iowrite32(le32_to_cpu(val), io + off);
>>
>> The implicit cpu_to_le32 of iowrite32() and our explicit swap cancel
>> out, so input data is device endian, which is assumed little.
>>
>>> This also works for big endian but rather by an accident: it reads 4 bytes
>>> from the stream (@val is big endian), converts to CPU format (which should
>>> be big endian) as it was little endian (@val becomes actually little
>>> endian) and calls iowrite32() which does not do swapping on big endian
>>> system.
>>
>> Really?
>>
>> In arch/powerpc/kernel/iomap.c iowrite32() is just a wrapper around
>> writel(), which seems to use the generic implementation, which does
>> include a cpu_to_le32.
>
>
> Ouch, wrong comment. iowrite32() does swapping. My bad.
>
>
>>
>> I also see other big endian archs like parisc doing cpu_to_le32 on
>> iowrite32, so I don't think this statement is true. I imagine it's
>> probably working for you because the swap cancel.
>>
>>> This removes byte swapping and makes use ioread32be/iowrite32be
>>> (and 16bit versions) on big-endian systems. The "be" helpers take
>>> native endian values and do swapping at the moment of writing to a PCI
>>> register using one of "store byte-reversed" instructions.
>>
>> So now you want iowrite32() on little endian and iowrite32be() on big
>> endian, the former does a cpu_to_le32 (which is a nop on little endian)
>> and the latter does a cpu_to_be32 (which is a nop on big endian)...
>> should we just be using __raw_writel() on both?
>
>
> We can do that too. The beauty of iowrite32be on ppc64 is that it does not
> swap and write separately, it is implemented via the "Store Word
> Byte-Reverse Indexed X-form" single instruction.
>
> And some archs (do not know which ones) may add memory barriers in their
> implementations of ioread/iowrite. __raw_writel is too raw :)
>
>> There doesn't actually
>> seem to be any change in behavior here, it just eliminates back-to-back
>> byte swaps, which are a nop on x86, but not power, right?
>
> Exactly. No dependency for QEMU.
How about that:
===
VFIO exposes BARs to user space as a byte stream so userspace can
read it using pread()/pwrite(). Since this is a byte stream, VFIO should
not do byte swapping and simply return values as it gets them from
PCI device.
Instead, the existing code assumes that byte stream in read/write is
little-endian and it fixes endianness for values which it passes to
ioreadXX/iowriteXX helpers in native format. The IO helpers do swapping
again. Since both byte swaps are nops on little-endian host, this works.
This also works for big endian but rather by an accident: it reads 4 bytes
from the stream (@val is big endian), converts to CPU format (which should
be big endian) as it was little endian (and @val becomes actually little
endian) and calls iowrite32() which does swapping on big endian
system again. So byte swap gets cancelled, __raw_writel() receives
a native value and then
*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
just does the right thing.
This removes byte swaps and makes use of ioread32be/iowrite32be
(and 16bit versions) which do explicit byte swapping at the moment
of write to a PCI register. PPC64 uses a special "Store Word
Byte-Reverse Indexed X-form" instruction which does swap and store.
===
any better?
>>> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>>> ---
>>> drivers/vfio/pci/vfio_pci_rdwr.c | 20 ++++++++++++++++----
>>> 1 file changed, 16 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/vfio/pci/vfio_pci_rdwr.c b/drivers/vfio/pci/vfio_pci_rdwr.c
>>> index 210db24..f363b5a 100644
>>> --- a/drivers/vfio/pci/vfio_pci_rdwr.c
>>> +++ b/drivers/vfio/pci/vfio_pci_rdwr.c
>>> @@ -21,6 +21,18 @@
>>>
>>> #include "vfio_pci_private.h"
>>>
>>> +#ifdef __BIG_ENDIAN__
>>> +#define ioread16_native ioread16be
>>> +#define ioread32_native ioread32be
>>> +#define iowrite16_native iowrite16be
>>> +#define iowrite32_native iowrite32be
>>> +#else
>>> +#define ioread16_native ioread16
>>> +#define ioread32_native ioread32
>>> +#define iowrite16_native iowrite16
>>> +#define iowrite32_native iowrite32
>>> +#endif
>>> +
>>> /*
>>> * Read or write from an __iomem region (MMIO or I/O port) with an excluded
>>> * range which is inaccessible. The excluded range drops writes and fills
>>> @@ -50,9 +62,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>> if (copy_from_user(&val, buf, 4))
>>> return -EFAULT;
>>>
>>> - iowrite32(le32_to_cpu(val), io + off);
>>> + iowrite32_native(val, io + off);
>>> } else {
>>> - val = cpu_to_le32(ioread32(io + off));
>>> + val = ioread32_native(io + off);
>>>
>>> if (copy_to_user(buf, &val, 4))
>>> return -EFAULT;
>>> @@ -66,9 +78,9 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
>>> if (copy_from_user(&val, buf, 2))
>>> return -EFAULT;
>>>
>>> - iowrite16(le16_to_cpu(val), io + off);
>>> + iowrite16_native(val, io + off);
>>> } else {
>>> - val = cpu_to_le16(ioread16(io + off));
>>> + val = ioread16_native(io + off);
>>>
>>> if (copy_to_user(buf, &val, 2))
>>> return -EFAULT;
>>
>>
>>
>
>
--
Alexey
^ permalink raw reply
* Re: Boot failure in Power7 pSeries
From: Michael Ellerman @ 2014-06-19 1:32 UTC (permalink / raw)
To: Mike Qiu; +Cc: linuxppc-dev
In-Reply-To: <53A155A6.2030805@linux.vnet.ibm.com>
On Wed, 2014-06-18 at 17:02 +0800, Mike Qiu wrote:
> On 06/18/2014 03:54 PM, Michael Ellerman wrote:
> > On Wed, 2014-06-18 at 11:27 +0800, Mike Qiu wrote:
> >> Anyone has a idea on this issue?
> > Did it ever work? If so which kernel version?
> It works for 3.15, but failed with linux version 3.16.0-rc1-next-20140617
What about 3.16-rc1 ?
> The config file can be simply get from /boot/configxxx. and "make
> menuconfig" and save without change anything(default).
Sure, but I don't have access to your box so please ..
> > Can you attach your actual .config.
^^^^
> > You could try building without CONFIG_PPC_POWERNV.
>
> Trying...., but it should work as default config from /boot/
Well yes that would be nice, but I'm trying to help you narrow down what the
problem is.
cheers
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox