* [PATCH v4 5/8] KVM: PPC: Ultravisor: Restrict flush of the partition tlb cache
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Madhavan Srinivasan, Michael Anderson, Ram Pai, Claudio Carvalho,
kvm-ppc, Bharata B Rao, Ryan Grimm, Sukadev Bhattiprolu,
Thiago Bauermann, Anshuman Khandual
In-Reply-To: <20190628200825.31049-1-cclaudio@linux.ibm.com>
From: Ram Pai <linuxram@us.ibm.com>
Ultravisor is responsible for flushing the tlb cache, since it manages
the PATE entries. Hence skip tlb flush, if the ultravisor firmware is
available.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
---
arch/powerpc/mm/book3s64/pgtable.c | 33 +++++++++++++++++-------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 224c5c7c2e3d..bc8eb2bf9810 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -224,6 +224,23 @@ void __init mmu_partition_table_init(void)
powernv_set_nmmu_ptcr(ptcr);
}
+static void flush_partition(unsigned int lpid, unsigned long dw0)
+{
+ if (dw0 & PATB_HR) {
+ asm volatile(PPC_TLBIE_5(%0, %1, 2, 0, 1) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ asm volatile(PPC_TLBIE_5(%0, %1, 2, 1, 1) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 1);
+ } else {
+ asm volatile(PPC_TLBIE_5(%0, %1, 2, 0, 0) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 0);
+ }
+ /* do we need fixup here ?*/
+ asm volatile("eieio; tlbsync; ptesync" : : : "memory");
+}
+
static void __mmu_partition_table_set_entry(unsigned int lpid,
unsigned long dw0,
unsigned long dw1)
@@ -238,20 +255,8 @@ static void __mmu_partition_table_set_entry(unsigned int lpid,
* The type of flush (hash or radix) depends on what the previous
* use of this partition ID was, not the new use.
*/
- asm volatile("ptesync" : : : "memory");
- if (old & PATB_HR) {
- asm volatile(PPC_TLBIE_5(%0,%1,2,0,1) : :
- "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
- asm volatile(PPC_TLBIE_5(%0,%1,2,1,1) : :
- "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
- trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 1);
- } else {
- asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
- "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
- trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 0);
- }
- /* do we need fixup here ?*/
- asm volatile("eieio; tlbsync; ptesync" : : : "memory");
+ if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
+ flush_partition(lpid, old);
}
void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
--
2.20.1
^ permalink raw reply related
* [PATCH v4 4/8] KVM: PPC: Ultravisor: Use UV_WRITE_PATE ucall to register a PATE
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Ryan Grimm, Madhavan Srinivasan, Michael Anderson, Ram Pai,
Claudio Carvalho, kvm-ppc, Bharata B Rao, Ryan Grimm,
Sukadev Bhattiprolu, Thiago Bauermann, Anshuman Khandual
In-Reply-To: <20190628200825.31049-1-cclaudio@linux.ibm.com>
From: Michael Anderson <andmike@linux.ibm.com>
When running under an ultravisor, the ultravisor controls the real
partition table and has it in secure memory where the hypervisor can't
access it, and therefore we (the HV) have to do a ucall whenever we want
to update an entry.
The HV still keeps a copy of its view of the partition table in normal
memory so that the nest MMU can access it.
Both partition tables will have PATE entries for HV and normal virtual
machines.
Suggested-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Signed-off-by: Michael Anderson <andmike@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[ Write the pate in HV's table before doing that in UV's ]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
---
arch/powerpc/include/asm/ultravisor-api.h | 5 +++-
arch/powerpc/include/asm/ultravisor.h | 14 ++++++++++
arch/powerpc/mm/book3s64/hash_utils.c | 3 +-
arch/powerpc/mm/book3s64/pgtable.c | 34 +++++++++++++++++++++--
arch/powerpc/mm/book3s64/radix_pgtable.c | 9 ++++--
5 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/ultravisor-api.h b/arch/powerpc/include/asm/ultravisor-api.h
index 49e766adabc7..141940771add 100644
--- a/arch/powerpc/include/asm/ultravisor-api.h
+++ b/arch/powerpc/include/asm/ultravisor-api.h
@@ -15,6 +15,9 @@
#define U_SUCCESS H_SUCCESS
#define U_FUNCTION H_FUNCTION
#define U_PARAMETER H_PARAMETER
+#define U_PERMISSION H_PERMISSION
-#endif /* _ASM_POWERPC_ULTRAVISOR_API_H */
+/* opcodes */
+#define UV_WRITE_PATE 0xF104
+#endif /* _ASM_POWERPC_ULTRAVISOR_API_H */
diff --git a/arch/powerpc/include/asm/ultravisor.h b/arch/powerpc/include/asm/ultravisor.h
index a78a2dacfd0b..996c1efd6c6d 100644
--- a/arch/powerpc/include/asm/ultravisor.h
+++ b/arch/powerpc/include/asm/ultravisor.h
@@ -12,6 +12,8 @@
#if !defined(__ASSEMBLY__)
+#include <linux/types.h>
+
/* Internal functions */
extern int early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
int depth, void *data);
@@ -28,8 +30,20 @@ extern int early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
*/
#if defined(CONFIG_PPC_POWERNV)
long ucall(unsigned long opcode, unsigned long *retbuf, ...);
+#else
+static long ucall(unsigned long opcode, unsigned long *retbuf, ...)
+{
+ return U_NOT_AVAILABLE;
+}
#endif
+static inline int uv_register_pate(u64 lpid, u64 dw0, u64 dw1)
+{
+ unsigned long retbuf[UCALL_BUFSIZE];
+
+ return ucall(UV_WRITE_PATE, retbuf, lpid, dw0, dw1);
+}
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_ULTRAVISOR_H */
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 1ff451892d7f..220a4e133240 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1080,9 +1080,10 @@ void hash__early_init_mmu_secondary(void)
if (!cpu_has_feature(CPU_FTR_ARCH_300))
mtspr(SPRN_SDR1, _SDR1);
- else
+ else if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
mtspr(SPRN_PTCR,
__pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+
}
/* Initialize SLB */
slb_initialize();
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index ad3dd977c22d..224c5c7c2e3d 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -16,6 +16,8 @@
#include <asm/tlb.h>
#include <asm/trace.h>
#include <asm/powernv.h>
+#include <asm/firmware.h>
+#include <asm/ultravisor.h>
#include <mm/mmu_decl.h>
#include <trace/events/thp.h>
@@ -206,12 +208,25 @@ void __init mmu_partition_table_init(void)
* 64 K size.
*/
ptcr = __pa(partition_tb) | (PATB_SIZE_SHIFT - 12);
- mtspr(SPRN_PTCR, ptcr);
+ /*
+ * If ultravisor is available, it is responsible for creating and
+ * managing partition table
+ */
+ if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
+ mtspr(SPRN_PTCR, ptcr);
+
+ /*
+ * Since nestMMU cannot access secure memory. Create
+ * and manage our own partition table. This table
+ * contains entries for nonsecure and hypervisor
+ * partition.
+ */
powernv_set_nmmu_ptcr(ptcr);
}
-void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
- unsigned long dw1)
+static void __mmu_partition_table_set_entry(unsigned int lpid,
+ unsigned long dw0,
+ unsigned long dw1)
{
unsigned long old = be64_to_cpu(partition_tb[lpid].patb0);
@@ -238,6 +253,19 @@ void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
/* do we need fixup here ?*/
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
}
+
+void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
+ unsigned long dw1)
+{
+ __mmu_partition_table_set_entry(lpid, dw0, dw1);
+
+ if (firmware_has_feature(FW_FEATURE_ULTRAVISOR)) {
+ uv_register_pate(lpid, dw0, dw1);
+ pr_info("PATE registered by ultravisor: dw0 = 0x%lx, dw1 = 0x%lx\n",
+ dw0, dw1);
+ }
+}
+
EXPORT_SYMBOL_GPL(mmu_partition_table_set_entry);
static pmd_t *get_pmd_from_cache(struct mm_struct *mm)
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 8904aa1243d8..da6a6b76a040 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -656,8 +656,10 @@ void radix__early_init_mmu_secondary(void)
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);
- mtspr(SPRN_PTCR,
- __pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+ if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
+ mtspr(SPRN_PTCR, __pa(partition_tb) |
+ (PATB_SIZE_SHIFT - 12));
+
radix_init_amor();
}
@@ -673,7 +675,8 @@ void radix__mmu_cleanup_all(void)
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr & ~LPCR_UPRT);
- mtspr(SPRN_PTCR, 0);
+ if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
+ mtspr(SPRN_PTCR, 0);
powernv_set_nmmu_ptcr(0);
radix__flush_tlb_all();
}
--
2.20.1
^ permalink raw reply related
* [PATCH v4 3/8] KVM: PPC: Ultravisor: Add generic ultravisor call handler
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Madhavan Srinivasan, Michael Anderson, Ram Pai, Claudio Carvalho,
kvm-ppc, Bharata B Rao, Ryan Grimm, Sukadev Bhattiprolu,
Thiago Bauermann, Anshuman Khandual
In-Reply-To: <20190628200825.31049-1-cclaudio@linux.ibm.com>
From: Ram Pai <linuxram@us.ibm.com>
Add the ucall() function, which can be used to make ultravisor calls
with varied number of in and out arguments. Ultravisor calls can be made
from the host or guests.
This copies the implementation of plpar_hcall().
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[ Change ucall.S to not save CR, rename and move headers, build ucall.S
if CONFIG_PPC_POWERNV set, use R3 for the ucall number and add some
comments in the code ]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
---
arch/powerpc/include/asm/ultravisor-api.h | 20 +++++++++++++++
arch/powerpc/include/asm/ultravisor.h | 20 +++++++++++++++
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/ucall.S | 30 +++++++++++++++++++++++
arch/powerpc/kernel/ultravisor.c | 4 +++
5 files changed, 75 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/include/asm/ultravisor-api.h
create mode 100644 arch/powerpc/kernel/ucall.S
diff --git a/arch/powerpc/include/asm/ultravisor-api.h b/arch/powerpc/include/asm/ultravisor-api.h
new file mode 100644
index 000000000000..49e766adabc7
--- /dev/null
+++ b/arch/powerpc/include/asm/ultravisor-api.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Ultravisor API.
+ *
+ * Copyright 2019, IBM Corporation.
+ *
+ */
+#ifndef _ASM_POWERPC_ULTRAVISOR_API_H
+#define _ASM_POWERPC_ULTRAVISOR_API_H
+
+#include <asm/hvcall.h>
+
+/* Return codes */
+#define U_NOT_AVAILABLE H_NOT_AVAILABLE
+#define U_SUCCESS H_SUCCESS
+#define U_FUNCTION H_FUNCTION
+#define U_PARAMETER H_PARAMETER
+
+#endif /* _ASM_POWERPC_ULTRAVISOR_API_H */
+
diff --git a/arch/powerpc/include/asm/ultravisor.h b/arch/powerpc/include/asm/ultravisor.h
index e5009b0d84ea..a78a2dacfd0b 100644
--- a/arch/powerpc/include/asm/ultravisor.h
+++ b/arch/powerpc/include/asm/ultravisor.h
@@ -8,8 +8,28 @@
#ifndef _ASM_POWERPC_ULTRAVISOR_H
#define _ASM_POWERPC_ULTRAVISOR_H
+#include <asm/ultravisor-api.h>
+
+#if !defined(__ASSEMBLY__)
+
/* Internal functions */
extern int early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
int depth, void *data);
+/* API functions */
+#define UCALL_BUFSIZE 4
+/**
+ * ucall: Make a powerpc ultravisor call.
+ * @opcode: The ultravisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * UCALL_BUFSIZE to size the return argument buffer.
+ */
+#if defined(CONFIG_PPC_POWERNV)
+long ucall(unsigned long opcode, unsigned long *retbuf, ...);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
#endif /* _ASM_POWERPC_ULTRAVISOR_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index f0caa302c8c0..f28baccc0a79 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -154,7 +154,7 @@ endif
obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
-obj-$(CONFIG_PPC_POWERNV) += ultravisor.o
+obj-$(CONFIG_PPC_POWERNV) += ultravisor.o ucall.o
# Disable GCOV, KCOV & sanitizers in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
diff --git a/arch/powerpc/kernel/ucall.S b/arch/powerpc/kernel/ucall.S
new file mode 100644
index 000000000000..1678f6eb7230
--- /dev/null
+++ b/arch/powerpc/kernel/ucall.S
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Generic code to perform an ultravisor call.
+ *
+ * Copyright 2019, IBM Corporation.
+ *
+ */
+#include <asm/ppc_asm.h>
+
+/*
+ * This function is based on the plpar_hcall()
+ */
+_GLOBAL_TOC(ucall)
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
+ mr r4,r5
+ mr r5,r6
+ mr r6,r7
+ mr r7,r8
+ mr r8,r9
+ mr r9,r10
+
+ sc 2 /* Invoke the ultravisor */
+
+ ld r12,STK_PARAM(R4)(r1)
+ std r4, 0(r12)
+ std r5, 8(r12)
+ std r6, 16(r12)
+ std r7, 24(r12)
+
+ blr /* Return r3 = status */
diff --git a/arch/powerpc/kernel/ultravisor.c b/arch/powerpc/kernel/ultravisor.c
index dc6021f63c97..02ddf79a9522 100644
--- a/arch/powerpc/kernel/ultravisor.c
+++ b/arch/powerpc/kernel/ultravisor.c
@@ -8,10 +8,14 @@
#include <linux/init.h>
#include <linux/printk.h>
#include <linux/string.h>
+#include <linux/export.h>
#include <asm/ultravisor.h>
#include <asm/firmware.h>
+/* in ucall.S */
+EXPORT_SYMBOL_GPL(ucall);
+
int __init early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
int depth, void *data)
{
--
2.20.1
^ permalink raw reply related
* [PATCH v4 1/8] KVM: PPC: Ultravisor: Introduce the MSR_S bit
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Madhavan Srinivasan, Michael Anderson, Ram Pai, Claudio Carvalho,
kvm-ppc, Bharata B Rao, Ryan Grimm, Sukadev Bhattiprolu,
Thiago Bauermann, Anshuman Khandual
In-Reply-To: <20190628200825.31049-1-cclaudio@linux.ibm.com>
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
The ultravisor processor mode is introduced in POWER platforms that
supports the Protected Execution Facility (PEF). Ultravisor is higher
privileged than hypervisor mode.
In PEF enabled platforms, the MSR_S bit is used to indicate if the
thread is in secure state. With the MSR_S bit, the privilege state of
the thread is now determined by MSR_S, MSR_HV and MSR_PR, as follows:
S HV PR
-----------------------
0 x 1 problem
1 0 1 problem
x x 0 privileged
x 1 0 hypervisor
1 1 0 ultravisor
1 1 1 reserved
The hypervisor doesn't (and can't) run with the MSR_S bit set, but a
secure guest and the ultravisor firmware do.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[ Update the commit message ]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
---
arch/powerpc/include/asm/reg.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 10caa145f98b..39b4c0a519f5 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -38,6 +38,7 @@
#define MSR_TM_LG 32 /* Trans Mem Available */
#define MSR_VEC_LG 25 /* Enable AltiVec */
#define MSR_VSX_LG 23 /* Enable VSX */
+#define MSR_S_LG 22 /* Secure VM bit */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
@@ -71,11 +72,13 @@
#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */
#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */
#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */
+#define MSR_S __MASK(MSR_S_LG) /* Secure state */
#else
/* so tests for these bits fail on 32-bit */
#define MSR_SF 0
#define MSR_ISF 0
#define MSR_HV 0
+#define MSR_S 0
#endif
/*
--
2.20.1
^ permalink raw reply related
* [PATCH v4 0/8] kvmppc: Paravirtualize KVM to support ultravisor
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Madhavan Srinivasan, Michael Anderson, Ram Pai, Claudio Carvalho,
kvm-ppc, Bharata B Rao, Ryan Grimm, Sukadev Bhattiprolu,
Thiago Bauermann, Anshuman Khandual
POWER platforms that supports the Protected Execution Facility (PEF)
introduce features that combine hardware facilities and firmware to
enable secure virtual machines. That includes a new processor mode
(ultravisor mode) and the ultravisor firmware.
In PEF enabled systems, the ultravisor firmware runs at a privilege
level above the hypervisor and also takes control over some system
resources. The hypervisor, though, can make system calls to access these
resources. Such system calls, a.k.a. ucalls, are handled by the
ultravisor firmware.
The processor allows part of the system memory to be configured as
secure memory, and introduces a a new mode, called secure mode, where
any software entity in that mode can access secure memory. The
hypervisor doesn't (and can't) run in secure mode, but a secure guest
and the ultravisor firmware do.
This patch set adds support for ultravisor calls and do some preparation
for running secure guests.
---
Changelog:
---
v3->v4:
- Patch "KVM: PPC: Ultravisor: Add PPC_UV config option":
- Moved to the patchset "kvmppc: HMM driver to manage pages of secure
guest" v5 that will be posted by Bharata Rao.
- Patch "powerpc: Introduce FW_FEATURE_ULTRAVISOR":
- Changed to depend only on CONFIG_PPC_POWERNV.
- Patch "KVM: PPC: Ultravisor: Add generic ultravisor call handler":
- Fixed whitespaces in ucall.S and in ultravisor-api.h.
- Changed to depend only on CONFIG_PPC_POWERNV.
- Changed the ucall wrapper to pass the ucall number in R3.
- Patch "KVM: PPC: Ultravisor: Use UV_WRITE_PATE ucall to register a
PATE:
- Changed to depend only on CONFIG_PPC_POWERNV.
- Patch "KVM: PPC: Ultravisor: Restrict LDBAR access":
- Fixed comment in opal-imc.c to be "Disable IMC devices, when
Ultravisor is enabled.
- Fixed signed-off-by.
- Patch "KVM: PPC: Ultravisor: Enter a secure guest":
- Changed the UV_RETURN assembly call to save the actual R3 in
R0 for the ultravisor and pass the UV_RETURN call number in R3.
- Patch "KVM: PPC: Ultravisor: Check for MSR_S during hv_reset_msr":
- Fixed commit message.
- Rebased to powerpc/next.
v2->v3:
- Squashed patches:
- "KVM: PPC: Ultravisor: Return to UV for hcalls from SVM"
- "KVM: PPC: Book3S HV: Fixed for running secure guests"
- Renamed patch from/to:
- "KVM: PPC: Ultravisor: Return to UV for hcalls from SVM"
- "KVM: PPC: Ultravisor: Enter a secure guest
- Rebased
- Addressed comments from Paul Mackerras
- Dropped ultravisor checks made in power8 code
- Updated the commit message for:
"KVM: PPC: Ultravisor: Enter a secure guest"
- Addressed comments from Maddy
- Dropped imc-pmu.c changes
- Changed opal-imc.c to fail the probe when the ultravisor is enabled
- Fixed "ucall defined but not used" issue when CONFIG_PPC_UV not set
v1->v2:
- Addressed comments from Paul Mackerras:
- Write the pate in HV's table before doing that in UV's
- Renamed and better documented the ultravisor header files. Also added
all possible return codes for each ucall
- Updated the commit message that introduces the MSR_S bit
- Moved ultravisor.c and ucall.S to arch/powerpc/kernel
- Changed ucall.S to not save CR
- Rebased
- Changed the patches order
- Updated several commit messages
- Added FW_FEATURE_ULTRAVISOR to enable use of firmware_has_feature()
- Renamed CONFIG_PPC_KVM_UV to CONFIG_PPC_UV and used it to ifdef the ucall
handler and the code that populates the powerpc_firmware_features for
ultravisor
- Exported the ucall symbol. KVM may be built as module.
- Restricted LDBAR access if the ultravisor firmware is available
- Dropped patches:
- "[PATCH 06/13] KVM: PPC: Ultravisor: UV_RESTRICTED_SPR_WRITE ucall"
- "[PATCH 07/13] KVM: PPC: Ultravisor: UV_RESTRICTED_SPR_READ ucall"
- "[PATCH 08/13] KVM: PPC: Ultravisor: fix mtspr and mfspr"
- Squashed patches:
- "[PATCH 09/13] KVM: PPC: Ultravisor: Return to UV for hcalls from SVM"
- "[PATCH 13/13] KVM: PPC: UV: Have fast_guest_return check secure_guest"
Claudio Carvalho (2):
powerpc: Introduce FW_FEATURE_ULTRAVISOR
KVM: PPC: Ultravisor: Restrict LDBAR access
Michael Anderson (2):
KVM: PPC: Ultravisor: Use UV_WRITE_PATE ucall to register a PATE
KVM: PPC: Ultravisor: Check for MSR_S during hv_reset_msr
Ram Pai (2):
KVM: PPC: Ultravisor: Add generic ultravisor call handler
KVM: PPC: Ultravisor: Restrict flush of the partition tlb cache
Sukadev Bhattiprolu (2):
KVM: PPC: Ultravisor: Introduce the MSR_S bit
KVM: PPC: Ultravisor: Enter a secure guest
arch/powerpc/include/asm/firmware.h | 5 +-
arch/powerpc/include/asm/kvm_host.h | 1 +
arch/powerpc/include/asm/reg.h | 3 ++
arch/powerpc/include/asm/ultravisor-api.h | 24 +++++++++
arch/powerpc/include/asm/ultravisor.h | 49 +++++++++++++++++
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/asm-offsets.c | 1 +
arch/powerpc/kernel/prom.c | 4 ++
arch/powerpc/kernel/ucall.S | 30 +++++++++++
arch/powerpc/kernel/ultravisor.c | 28 ++++++++++
arch/powerpc/kvm/book3s_64_mmu_hv.c | 1 +
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 42 ++++++++++++---
arch/powerpc/mm/book3s64/hash_utils.c | 3 +-
arch/powerpc/mm/book3s64/pgtable.c | 65 +++++++++++++++++------
arch/powerpc/mm/book3s64/radix_pgtable.c | 9 ++--
arch/powerpc/platforms/powernv/idle.c | 6 ++-
arch/powerpc/platforms/powernv/opal-imc.c | 4 ++
17 files changed, 246 insertions(+), 30 deletions(-)
create mode 100644 arch/powerpc/include/asm/ultravisor-api.h
create mode 100644 arch/powerpc/include/asm/ultravisor.h
create mode 100644 arch/powerpc/kernel/ucall.S
create mode 100644 arch/powerpc/kernel/ultravisor.c
--
2.20.1
^ permalink raw reply
* [PATCH v4 2/8] powerpc: Introduce FW_FEATURE_ULTRAVISOR
From: Claudio Carvalho @ 2019-06-28 20:08 UTC (permalink / raw)
To: linuxppc-dev
Cc: Madhavan Srinivasan, Michael Anderson, Ram Pai, Claudio Carvalho,
kvm-ppc, Bharata B Rao, Ryan Grimm, Sukadev Bhattiprolu,
Thiago Bauermann, Anshuman Khandual
In-Reply-To: <20190628200825.31049-1-cclaudio@linux.ibm.com>
This feature tells if the ultravisor firmware is available to handle
ucalls.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
[ Device node name to "ibm,ultravisor" ]
Signed-off-by: Michael Anderson <andmike@linux.ibm.com>
---
arch/powerpc/include/asm/firmware.h | 5 +++--
arch/powerpc/include/asm/ultravisor.h | 15 +++++++++++++++
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/prom.c | 4 ++++
arch/powerpc/kernel/ultravisor.c | 24 ++++++++++++++++++++++++
5 files changed, 47 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/include/asm/ultravisor.h
create mode 100644 arch/powerpc/kernel/ultravisor.c
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 00bc42d95679..43b48c4d3ca9 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -54,6 +54,7 @@
#define FW_FEATURE_DRC_INFO ASM_CONST(0x0000000800000000)
#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000002000000000)
+#define FW_FEATURE_ULTRAVISOR ASM_CONST(0x0000004000000000)
#ifndef __ASSEMBLY__
@@ -72,9 +73,9 @@ enum {
FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
FW_FEATURE_HPT_RESIZE | FW_FEATURE_DRMEM_V2 |
FW_FEATURE_DRC_INFO | FW_FEATURE_BLOCK_REMOVE |
- FW_FEATURE_PAPR_SCM,
+ FW_FEATURE_PAPR_SCM | FW_FEATURE_ULTRAVISOR,
FW_FEATURE_PSERIES_ALWAYS = 0,
- FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
+ FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_ULTRAVISOR,
FW_FEATURE_POWERNV_ALWAYS = 0,
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
diff --git a/arch/powerpc/include/asm/ultravisor.h b/arch/powerpc/include/asm/ultravisor.h
new file mode 100644
index 000000000000..e5009b0d84ea
--- /dev/null
+++ b/arch/powerpc/include/asm/ultravisor.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Ultravisor definitions
+ *
+ * Copyright 2019, IBM Corporation.
+ *
+ */
+#ifndef _ASM_POWERPC_ULTRAVISOR_H
+#define _ASM_POWERPC_ULTRAVISOR_H
+
+/* Internal functions */
+extern int early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
+ int depth, void *data);
+
+#endif /* _ASM_POWERPC_ULTRAVISOR_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0ea6c4aa3a20..f0caa302c8c0 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -154,6 +154,7 @@ endif
obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
+obj-$(CONFIG_PPC_POWERNV) += ultravisor.o
# Disable GCOV, KCOV & sanitizers in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4221527b082f..67a2c1b39252 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -59,6 +59,7 @@
#include <asm/firmware.h>
#include <asm/dt_cpu_ftrs.h>
#include <asm/drmem.h>
+#include <asm/ultravisor.h>
#include <mm/mmu_decl.h>
@@ -706,6 +707,9 @@ void __init early_init_devtree(void *params)
#ifdef CONFIG_PPC_POWERNV
/* Some machines might need OPAL info for debugging, grab it now. */
of_scan_flat_dt(early_init_dt_scan_opal, NULL);
+
+ /* Scan tree for ultravisor feature */
+ of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL);
#endif
#ifdef CONFIG_FA_DUMP
diff --git a/arch/powerpc/kernel/ultravisor.c b/arch/powerpc/kernel/ultravisor.c
new file mode 100644
index 000000000000..dc6021f63c97
--- /dev/null
+++ b/arch/powerpc/kernel/ultravisor.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ultravisor high level interfaces
+ *
+ * Copyright 2019, IBM Corporation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/printk.h>
+#include <linux/string.h>
+
+#include <asm/ultravisor.h>
+#include <asm/firmware.h>
+
+int __init early_init_dt_scan_ultravisor(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ if (depth != 1 || strcmp(uname, "ibm,ultravisor") != 0)
+ return 0;
+
+ powerpc_firmware_features |= FW_FEATURE_ULTRAVISOR;
+ pr_debug("Ultravisor detected!\n");
+ return 1;
+}
--
2.20.1
^ permalink raw reply related
* Re: [PATCH] powerpc/rtas: Fix hang in race against concurrent cpu offline
From: Juliet Kim @ 2019-06-28 20:03 UTC (permalink / raw)
To: Nathan Lynch; +Cc: linuxppc-dev, mmc, mwb
In-Reply-To: <871rzfucr4.fsf@linux.ibm.com>
On 6/26/19 6:51 PM, Nathan Lynch wrote:
> Hi Juliet,
>
> Juliet Kim <julietk@linux.vnet.ibm.com> writes:
>> On 6/25/19 12:29 PM, Nathan Lynch wrote:
>>> Juliet Kim <julietk@linux.vnet.ibm.com> writes:
>>>> However, that fix failed to notify Hypervisor that the LPM attempted
>>>> had been abandoned which results in a system hang.
>>> It is surprising to me that leaving a migration unterminated would cause
>>> Linux to hang. Can you explain more about how that happens?
>>>
>> PHYP will block further requests(next partition migration, dlpar etc) while
>> it's in suspending state. That would have a follow-on effect on the HMC and
>> potentially this and other partitions.
> I can believe that operations on _this LPAR_ would be blocked by the
> platform and/or management console while the migration remains
> unterminated, but the OS should not be able to perpetrate a denial of
> service on other partitions or the management console simply by botching
> the LPM protocol. If it can, that's not Linux's bug to fix.
>
>
>>>> Fix this by sending a signal PHYP to cancel the migration, so that PHYP
>>>> can stop waiting, and clean up the migration.
>>> This is well-spotted and rtas_ibm_suspend_me() needs to signal
>>> cancellation in several error paths. But I don't agree that this is one
>>> of them: this race is going to be a temporary condition in any
>>> production setting, and retrying would allow the migration to
>>> succeed.
>> If LPM and CPU offine requests conflict with one another, it might be better
>> to let them fail and let the customer decide which he prefers.
> Hmm I don't think so. When (if ever) this happens in production it would
> be the result of an unlucky race with a power management daemon or
> similar, not a conscious decision of the administrator in the moment.
>
Guessing that a production race would only be against power mgmt is maybe
reasonable. But we have an actual failure case where the race was against
an explicit offline request, and that's a legitimate/supported thing for
a customer to do.
>> IBM i cancels migration if the other OS components/operations veto
>> migration. It’s consistent with other OS behavior for LPM.
> But this situation isn't really like that. If we were to have a real
> veto mechanism, it would only make sense to have it run as early as
> possible, before the platform has done a bunch of work. This benign,
> recoverable race is occurring right before we complete the migration,
> which at this point has been copying state to the destination for
> minutes or hours. It doesn't make sense to error out like this.
Let me clarify that the cancellation is occurring in the phase preparing
for migration.It would be even better if it runs before LPM is allowed to make
a start. But that's what a long-term solution might look like.
> As I mentioned earlier though, it does make sense to signal a
> cancellation for these less-recoverable error conditions in
> rtas_ibm_suspend_me():
>
> - rtas_online_cpus_mask() failure
> - alloc_cpumask_var() failure
> - the atomic_read(&data.error) != 0 case after returning from the IPI
^ permalink raw reply
* Re: [PATCH v2] powerpc/pseries: Fix maximum memory value
From: Nathan Lynch @ 2019-06-28 18:19 UTC (permalink / raw)
To: Naveen N. Rao; +Cc: linuxppc-dev, Aravinda Prasad
In-Reply-To: <1561743225.hrre8pgw6j.naveen@linux.ibm.com>
"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> writes:
> Nathan Lynch wrote:
>> It would likely help with review and future maintenance if the semantics
>> and intended use of the MaxMem field are made a little more
>> explicit. For example, is it supposed to include persistent memory?
>> Perhaps a follow-up patch could address this. Or maybe I'm overthinking
>> it.
>
> This was primarily aimed to replicate what AIX lparstat does and
> documentation (*) just says:
>
> Maximum Memory
> Maximum possible amount of Memory.
>
> I think this mirrors the maximum memory value set in the LPAR profile,
> and this provides a way to obtain that value from within the LPAR.
>
> This doesn't necessarily answer your question, but that's at least the
> reference.
>
> (*)
> https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/com.ibm.aix.cmds3/lparstat.htm
Thanks for the reference. Consider my concern withdrawn.
^ permalink raw reply
* Re: [PATCH v2] powerpc/pseries: Fix maximum memory value
From: Naveen N. Rao @ 2019-06-28 17:38 UTC (permalink / raw)
To: Aravinda Prasad, Nathan Lynch; +Cc: linuxppc-dev
In-Reply-To: <87tvc9sjrb.fsf@linux.ibm.com>
Nathan Lynch wrote:
> Aravinda Prasad <aravinda@linux.vnet.ibm.com> writes:
>> Calculating the maximum memory based on the number of lmbs
>> and lmb size does not account for the RMA region. Hence
>> use memory_hotplug_max(), which already accounts for the
>> RMA region, to fetch the maximum memory value. Thanks to
>> Nathan Lynch for suggesting the memory_hotplug_max()
>> function.
>
> Well, I hope I haven't led you astray... will it give you the desired
> result on a kernel configured without memory hotplug support, booted in
> an LPAR with some huge pages configured?
>
> If so, then
> Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
>
> It would likely help with review and future maintenance if the semantics
> and intended use of the MaxMem field are made a little more
> explicit. For example, is it supposed to include persistent memory?
> Perhaps a follow-up patch could address this. Or maybe I'm overthinking
> it.
This was primarily aimed to replicate what AIX lparstat does and
documentation (*) just says:
Maximum Memory
Maximum possible amount of Memory.
I think this mirrors the maximum memory value set in the LPAR profile,
and this provides a way to obtain that value from within the LPAR.
This doesn't necessarily answer your question, but that's at least the
reference.
(*)
https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/com.ibm.aix.cmds3/lparstat.htm
- Naveen
^ permalink raw reply
* Re: [PATCH v2] powerpc/pseries: Fix maximum memory value
From: Nathan Lynch @ 2019-06-28 17:27 UTC (permalink / raw)
To: Aravinda Prasad; +Cc: naveen.n.rao, linuxppc-dev
In-Reply-To: <156170480663.26214.11212383510892156924.stgit@aravinda>
Aravinda Prasad <aravinda@linux.vnet.ibm.com> writes:
> Calculating the maximum memory based on the number of lmbs
> and lmb size does not account for the RMA region. Hence
> use memory_hotplug_max(), which already accounts for the
> RMA region, to fetch the maximum memory value. Thanks to
> Nathan Lynch for suggesting the memory_hotplug_max()
> function.
Well, I hope I haven't led you astray... will it give you the desired
result on a kernel configured without memory hotplug support, booted in
an LPAR with some huge pages configured?
If so, then
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
It would likely help with review and future maintenance if the semantics
and intended use of the MaxMem field are made a little more
explicit. For example, is it supposed to include persistent memory?
Perhaps a follow-up patch could address this. Or maybe I'm overthinking
it.
^ permalink raw reply
* Re: [RFC PATCH v2 02/12] powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
From: Andreas Schwab @ 2019-06-28 17:08 UTC (permalink / raw)
To: Christophe Leroy; +Cc: mikey, linux-kernel, Paul Mackerras, linuxppc-dev
In-Reply-To: <7dd19eae-793e-b334-e621-7681998ddf2e@c-s.fr>
On Jun 28 2019, Christophe Leroy <christophe.leroy@c-s.fr> wrote:
> Le 28/06/2019 à 18:36, Andreas Schwab a écrit :
>> On Jun 28 2019, Christophe Leroy <christophe.leroy@c-s.fr> wrote:
>>
>>> diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
>>> index f5f1ccc740fc..37d7befbb8dc 100644
>>> --- a/arch/powerpc/include/uapi/asm/ptrace.h
>>> +++ b/arch/powerpc/include/uapi/asm/ptrace.h
>>> @@ -43,12 +43,11 @@ struct pt_regs
>>> unsigned long link;
>>> unsigned long xer;
>>> unsigned long ccr;
>>> -#ifdef __powerpc64__
>>> - unsigned long softe; /* Soft enabled/disabled */
>>> -#else
>>> - unsigned long mq; /* 601 only (not used at present) */
>>> + union {
>>> + unsigned long softe; /* Soft enabled/disabled */
>>> + unsigned long mq; /* 601 only (not used at present) */
>>> /* Used on APUS to hold IPL value. */
>>> -#endif
>>> + };
>>
>> Anonymous unions are a C11 feature.
>>
>
> Is that a problem ?
Yes, this is a UAPI header.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1
"And now for something completely different."
^ permalink raw reply
* Re: [RFC PATCH v2 02/12] powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
From: Christophe Leroy @ 2019-06-28 16:39 UTC (permalink / raw)
To: Andreas Schwab; +Cc: mikey, linux-kernel, Paul Mackerras, linuxppc-dev
In-Reply-To: <874l49mzuv.fsf@igel.home>
Le 28/06/2019 à 18:36, Andreas Schwab a écrit :
> On Jun 28 2019, Christophe Leroy <christophe.leroy@c-s.fr> wrote:
>
>> diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
>> index f5f1ccc740fc..37d7befbb8dc 100644
>> --- a/arch/powerpc/include/uapi/asm/ptrace.h
>> +++ b/arch/powerpc/include/uapi/asm/ptrace.h
>> @@ -43,12 +43,11 @@ struct pt_regs
>> unsigned long link;
>> unsigned long xer;
>> unsigned long ccr;
>> -#ifdef __powerpc64__
>> - unsigned long softe; /* Soft enabled/disabled */
>> -#else
>> - unsigned long mq; /* 601 only (not used at present) */
>> + union {
>> + unsigned long softe; /* Soft enabled/disabled */
>> + unsigned long mq; /* 601 only (not used at present) */
>> /* Used on APUS to hold IPL value. */
>> -#endif
>> + };
>
> Anonymous unions are a C11 feature.
>
Is that a problem ?
Kernel has a minimum GCC requirement of version 4.6, doesn't 4.6 support
C11 ?
Christophe
^ permalink raw reply
* Re: [RFC PATCH v2 02/12] powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
From: Andreas Schwab @ 2019-06-28 16:36 UTC (permalink / raw)
To: Christophe Leroy; +Cc: mikey, linux-kernel, Paul Mackerras, linuxppc-dev
In-Reply-To: <34af3942cd27f6b5365caae772fb8e0af44763d5.1561735587.git.christophe.leroy@c-s.fr>
On Jun 28 2019, Christophe Leroy <christophe.leroy@c-s.fr> wrote:
> diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
> index f5f1ccc740fc..37d7befbb8dc 100644
> --- a/arch/powerpc/include/uapi/asm/ptrace.h
> +++ b/arch/powerpc/include/uapi/asm/ptrace.h
> @@ -43,12 +43,11 @@ struct pt_regs
> unsigned long link;
> unsigned long xer;
> unsigned long ccr;
> -#ifdef __powerpc64__
> - unsigned long softe; /* Soft enabled/disabled */
> -#else
> - unsigned long mq; /* 601 only (not used at present) */
> + union {
> + unsigned long softe; /* Soft enabled/disabled */
> + unsigned long mq; /* 601 only (not used at present) */
> /* Used on APUS to hold IPL value. */
> -#endif
> + };
Anonymous unions are a C11 feature.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1
"And now for something completely different."
^ permalink raw reply
* [PATCH] powerpc/hw_breakpoint: move instruction stepping out of hw_breakpoint_handler()
From: Christophe Leroy @ 2019-06-28 15:55 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
On 8xx, breakpoints stop after executing the instruction, so
stepping/emulation is not needed. Move it into a sub-function and
remove the #ifdefs.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/hw_breakpoint.c | 60 ++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index a293a53b4365..a94142e729bf 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -198,15 +198,43 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
/*
* Handle debug exception notifications.
*/
+static bool stepping_handler(struct pt_regs *regs, struct perf_event *bp,
+ unsigned long addr)
+{
+ int stepped;
+ unsigned int instr;
+
+ /* Do not emulate user-space instructions, instead single-step them */
+ if (user_mode(regs)) {
+ current->thread.last_hit_ubp = bp;
+ regs->msr |= MSR_SE;
+ return false;
+ }
+
+ stepped = 0;
+ instr = 0;
+ if (!__get_user_inatomic(instr, (unsigned int *)regs->nip))
+ stepped = emulate_step(regs, instr);
+
+ /*
+ * emulate_step() could not execute it. We've failed in reliably
+ * handling the hw-breakpoint. Unregister it and throw a warning
+ * message to let the user know about it.
+ */
+ if (!stepped) {
+ WARN(1, "Unable to handle hardware breakpoint. Breakpoint at "
+ "0x%lx will be disabled.", addr);
+ perf_event_disable_inatomic(bp);
+ return false;
+ }
+ return true;
+}
+
int hw_breakpoint_handler(struct die_args *args)
{
int rc = NOTIFY_STOP;
struct perf_event *bp;
struct pt_regs *regs = args->regs;
-#ifndef CONFIG_PPC_8xx
- int stepped = 1;
- unsigned int instr;
-#endif
struct arch_hw_breakpoint *info;
unsigned long dar = regs->dar;
@@ -251,32 +279,10 @@ int hw_breakpoint_handler(struct die_args *args)
(dar - bp->attr.bp_addr < bp->attr.bp_len)))
info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
-#ifndef CONFIG_PPC_8xx
- /* Do not emulate user-space instructions, instead single-step them */
- if (user_mode(regs)) {
- current->thread.last_hit_ubp = bp;
- regs->msr |= MSR_SE;
+ if (!IS_ENABLED(CONFIG_PPC_8xx) && !stepping_handler(regs, bp, info->address))
goto out;
- }
-
- stepped = 0;
- instr = 0;
- if (!__get_user_inatomic(instr, (unsigned int *) regs->nip))
- stepped = emulate_step(regs, instr);
/*
- * emulate_step() could not execute it. We've failed in reliably
- * handling the hw-breakpoint. Unregister it and throw a warning
- * message to let the user know about it.
- */
- if (!stepped) {
- WARN(1, "Unable to handle hardware breakpoint. Breakpoint at "
- "0x%lx will be disabled.", info->address);
- perf_event_disable_inatomic(bp);
- goto out;
- }
-#endif
- /*
* As a policy, the callback is invoked in a 'trigger-after-execute'
* fashion
*/
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 12/12] powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
From: Christophe Leroy @ 2019-06-28 15:48 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
ptrace_triggered() is declared in asm/hw_breakpoint.h and
only needed when CONFIG_HW_BREAKPOINT is set, so move it
into hw_breakpoint.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/hw_breakpoint.c | 16 ++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 18 ------------------
2 files changed, 16 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index a293a53b4365..b71d3837d673 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -367,6 +367,22 @@ void hw_breakpoint_pmu_read(struct perf_event *bp)
/* TODO */
}
+void ptrace_triggered(struct perf_event *bp,
+ struct perf_sample_data *data, struct pt_regs *regs)
+{
+ struct perf_event_attr attr;
+
+ /*
+ * Disable the breakpoint request here since ptrace has defined a
+ * one-shot behaviour for breakpoint exceptions in PPC64.
+ * The SIGTRAP signal is generated automatically for us in do_dabr().
+ * We don't have to do anything about that here
+ */
+ attr = bp->attr;
+ attr.disabled = true;
+ modify_user_hw_breakpoint(bp, &attr);
+}
+
bool dawr_force_enable;
EXPORT_SYMBOL_GPL(dawr_force_enable);
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 31e8c5a9171e..b85998b159d7 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -50,24 +50,6 @@
#include <kernel/ptrace/ptrace-decl.h>
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-void ptrace_triggered(struct perf_event *bp,
- struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event_attr attr;
-
- /*
- * Disable the breakpoint request here since ptrace has defined a
- * one-shot behaviour for breakpoint exceptions in PPC64.
- * The SIGTRAP signal is generated automatically for us in do_dabr().
- * We don't have to do anything about that here
- */
- attr = bp->attr;
- attr.disabled = true;
- modify_user_hw_breakpoint(bp, &attr);
-}
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
/*
* Called by kernel/ptrace.c when detaching..
*
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 11/12] powerpc/ptrace: create ppc_gethwdinfo()
From: Christophe Leroy @ 2019-06-28 15:48 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Create ippc_gethwdinfo() to handle PPC_PTRACE_GETHWDBGINFO and
reduce ifdef mess
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/ptrace-adv.c | 15 +++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 1 +
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 20 +++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 32 +------------------------------
4 files changed, 37 insertions(+), 31 deletions(-)
diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
index dcc765940344..f5f334484ebc 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-adv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
@@ -83,6 +83,21 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
+{
+ dbginfo->version = 1;
+ dbginfo->num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
+ dbginfo->num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
+ dbginfo->num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
+ dbginfo->data_bp_alignment = 4;
+ dbginfo->sizeof_condition = 4;
+ dbginfo->features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
+ PPC_DEBUG_FEATURE_INSN_BP_MASK;
+ if (IS_ENABLED(CONFIG_PPC_ADV_DEBUG_DAC_RANGE))
+ dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_RANGE |
+ PPC_DEBUG_FEATURE_DATA_BP_MASK;
+}
+
int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
unsigned long __user *datalp)
{
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 4b4b6a1d508a..3c8a81999292 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -176,6 +176,7 @@ int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
extern const struct user_regset_view user_ppc_native_view;
/* ptrace-(no)adv */
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo);
int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
unsigned long __user *datalp);
int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 985cca136f85..426fedd7ab6c 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -64,6 +64,26 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
+{
+ dbginfo->version = 1;
+ dbginfo->num_instruction_bps = 0;
+ if (ppc_breakpoint_available())
+ dbginfo->num_data_bps = 1;
+ else
+ dbginfo->num_data_bps = 0;
+ dbginfo->num_condition_regs = 0;
+ dbginfo->data_bp_alignment = sizeof(long);
+ dbginfo->sizeof_condition = 0;
+ if (IS_ENABLED(CONFIG_HAVE_HW_BREAKPOINT)) {
+ dbginfo->features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
+ if (dawr_enabled())
+ dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_DAWR;
+ } else {
+ dbginfo->features = 0;
+ }
+}
+
int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
unsigned long __user *datalp)
{
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index e789afae6f56..31e8c5a9171e 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -159,37 +159,7 @@ long arch_ptrace(struct task_struct *child, long request,
case PPC_PTRACE_GETHWDBGINFO: {
struct ppc_debug_info dbginfo;
- dbginfo.version = 1;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
- dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
- dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
- dbginfo.data_bp_alignment = 4;
- dbginfo.sizeof_condition = 4;
- dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
- PPC_DEBUG_FEATURE_INSN_BP_MASK;
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
- dbginfo.features |=
- PPC_DEBUG_FEATURE_DATA_BP_RANGE |
- PPC_DEBUG_FEATURE_DATA_BP_MASK;
-#endif
-#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
- dbginfo.num_instruction_bps = 0;
- if (ppc_breakpoint_available())
- dbginfo.num_data_bps = 1;
- else
- dbginfo.num_data_bps = 0;
- dbginfo.num_condition_regs = 0;
- dbginfo.data_bp_alignment = sizeof(long);
- dbginfo.sizeof_condition = 0;
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
- if (dawr_enabled())
- dbginfo.features |= PPC_DEBUG_FEATURE_DATA_BP_DAWR;
-#else
- dbginfo.features = 0;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
+ ppc_gethwdinfo(&dbginfo);
if (copy_to_user(datavp, &dbginfo,
sizeof(struct ppc_debug_info)))
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 09/12] powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Move ADV_DEBUG_REGS functions out of ptrace.c, into
ptrace-adv.c and ptrace-noadv.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 4 +
arch/powerpc/kernel/ptrace/ptrace-adv.c | 487 ++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 5 +
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 258 ++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 652 ------------------------------
5 files changed, 754 insertions(+), 652 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-adv.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-noadv.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 7addc5994bb9..e9d97c2d063e 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -14,3 +14,7 @@ endif
obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
obj-$(CONFIG_SPE) += ptrace-spe.o
obj-$(CONFIG_PPC_TRANSACTIONAL_MEM) += ptrace-tm.o
+obj-$(CONFIG_PPC_ADV_DEBUG_REGS) += ptrace-adv.o
+ifneq ($(CONFIG_PPC_ADV_DEBUG_REGS),y)
+obj-y += ptrace-noadv.o
+endif
diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
new file mode 100644
index 000000000000..86e71fa6c5c8
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
@@ -0,0 +1,487 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+void user_enable_single_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+ task->thread.debug.dbcr0 &= ~DBCR0_BT;
+ task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+ regs->msr |= MSR_DE;
+ }
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_enable_block_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+ task->thread.debug.dbcr0 &= ~DBCR0_IC;
+ task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
+ regs->msr |= MSR_DE;
+ }
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+ /*
+ * The logic to disable single stepping should be as
+ * simple as turning off the Instruction Complete flag.
+ * And, after doing so, if all debug flags are off, turn
+ * off DBCR0(IDM) and MSR(DE) .... Torez
+ */
+ task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
+ /*
+ * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
+ */
+ if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+ task->thread.debug.dbcr1)) {
+ /*
+ * All debug events were off.....
+ */
+ task->thread.debug.dbcr0 &= ~DBCR0_IDM;
+ regs->msr &= ~MSR_DE;
+ }
+ }
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+ /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+ * For embedded processors we support one DAC and no IAC's at the
+ * moment.
+ */
+ if (addr > 0)
+ return -EINVAL;
+
+ /* The bottom 3 bits in dabr are flags */
+ if ((data & ~0x7UL) >= TASK_SIZE)
+ return -EIO;
+
+ /* As described above, it was assumed 3 bits were passed with the data
+ * address, but we will assume only the mode bits will be passed
+ * as to not cause alignment restrictions for DAC-based processors.
+ */
+
+ /* DAC's hold the whole address without any mode flags */
+ task->thread.debug.dac1 = data & ~0x3UL;
+
+ if (task->thread.debug.dac1 == 0) {
+ dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+ if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
+ task->thread.debug.dbcr1)) {
+ task->thread.regs->msr &= ~MSR_DE;
+ task->thread.debug.dbcr0 &= ~DBCR0_IDM;
+ }
+ return 0;
+ }
+
+ /* Read or Write bits must be set */
+
+ if (!(data & 0x3UL))
+ return -EINVAL;
+
+ /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+ register */
+ task->thread.debug.dbcr0 |= DBCR0_IDM;
+
+ /* Check for write and read flags and set DBCR0
+ accordingly */
+ dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
+ if (data & 0x1UL)
+ dbcr_dac(task) |= DBCR_DAC1R;
+ if (data & 0x2UL)
+ dbcr_dac(task) |= DBCR_DAC1W;
+ task->thread.regs->msr |= MSR_DE;
+ return 0;
+}
+
+static long set_instruction_bp(struct task_struct *child,
+ struct ppc_hw_breakpoint *bp_info)
+{
+ int slot;
+ int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
+ int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
+ int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
+ int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
+
+ if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+ slot2_in_use = 1;
+ if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+ slot4_in_use = 1;
+
+ if (bp_info->addr >= TASK_SIZE)
+ return -EIO;
+
+ if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+
+ /* Make sure range is valid. */
+ if (bp_info->addr2 >= TASK_SIZE)
+ return -EIO;
+
+ /* We need a pair of IAC regsisters */
+ if ((!slot1_in_use) && (!slot2_in_use)) {
+ slot = 1;
+ child->thread.debug.iac1 = bp_info->addr;
+ child->thread.debug.iac2 = bp_info->addr2;
+ child->thread.debug.dbcr0 |= DBCR0_IAC1;
+ if (bp_info->addr_mode ==
+ PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+ dbcr_iac_range(child) |= DBCR_IAC12X;
+ else
+ dbcr_iac_range(child) |= DBCR_IAC12I;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+ } else if ((!slot3_in_use) && (!slot4_in_use)) {
+ slot = 3;
+ child->thread.debug.iac3 = bp_info->addr;
+ child->thread.debug.iac4 = bp_info->addr2;
+ child->thread.debug.dbcr0 |= DBCR0_IAC3;
+ if (bp_info->addr_mode ==
+ PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+ dbcr_iac_range(child) |= DBCR_IAC34X;
+ else
+ dbcr_iac_range(child) |= DBCR_IAC34I;
+#endif
+ } else
+ return -ENOSPC;
+ } else {
+ /* We only need one. If possible leave a pair free in
+ * case a range is needed later
+ */
+ if (!slot1_in_use) {
+ /*
+ * Don't use iac1 if iac1-iac2 are free and either
+ * iac3 or iac4 (but not both) are free
+ */
+ if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
+ slot = 1;
+ child->thread.debug.iac1 = bp_info->addr;
+ child->thread.debug.dbcr0 |= DBCR0_IAC1;
+ goto out;
+ }
+ }
+ if (!slot2_in_use) {
+ slot = 2;
+ child->thread.debug.iac2 = bp_info->addr;
+ child->thread.debug.dbcr0 |= DBCR0_IAC2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+ } else if (!slot3_in_use) {
+ slot = 3;
+ child->thread.debug.iac3 = bp_info->addr;
+ child->thread.debug.dbcr0 |= DBCR0_IAC3;
+ } else if (!slot4_in_use) {
+ slot = 4;
+ child->thread.debug.iac4 = bp_info->addr;
+ child->thread.debug.dbcr0 |= DBCR0_IAC4;
+#endif
+ } else
+ return -ENOSPC;
+ }
+out:
+ child->thread.debug.dbcr0 |= DBCR0_IDM;
+ child->thread.regs->msr |= MSR_DE;
+
+ return slot;
+}
+
+static int del_instruction_bp(struct task_struct *child, int slot)
+{
+ switch (slot) {
+ case 1:
+ if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
+ return -ENOENT;
+
+ if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
+ /* address range - clear slots 1 & 2 */
+ child->thread.debug.iac2 = 0;
+ dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
+ }
+ child->thread.debug.iac1 = 0;
+ child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
+ break;
+ case 2:
+ if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
+ return -ENOENT;
+
+ if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+ /* used in a range */
+ return -EINVAL;
+ child->thread.debug.iac2 = 0;
+ child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
+ break;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+ case 3:
+ if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
+ return -ENOENT;
+
+ if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
+ /* address range - clear slots 3 & 4 */
+ child->thread.debug.iac4 = 0;
+ dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
+ }
+ child->thread.debug.iac3 = 0;
+ child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
+ break;
+ case 4:
+ if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
+ return -ENOENT;
+
+ if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+ /* Used in a range */
+ return -EINVAL;
+ child->thread.debug.iac4 = 0;
+ child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+ int byte_enable =
+ (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
+ & 0xf;
+ int condition_mode =
+ bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
+ int slot;
+
+ if (byte_enable && (condition_mode == 0))
+ return -EINVAL;
+
+ if (bp_info->addr >= TASK_SIZE)
+ return -EIO;
+
+ if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
+ slot = 1;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+ dbcr_dac(child) |= DBCR_DAC1R;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+ dbcr_dac(child) |= DBCR_DAC1W;
+ child->thread.debug.dac1 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+ if (byte_enable) {
+ child->thread.debug.dvc1 =
+ (unsigned long)bp_info->condition_value;
+ child->thread.debug.dbcr2 |=
+ ((byte_enable << DBCR2_DVC1BE_SHIFT) |
+ (condition_mode << DBCR2_DVC1M_SHIFT));
+ }
+#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+ } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
+ /* Both dac1 and dac2 are part of a range */
+ return -ENOSPC;
+#endif
+ } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
+ slot = 2;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+ dbcr_dac(child) |= DBCR_DAC2R;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+ dbcr_dac(child) |= DBCR_DAC2W;
+ child->thread.debug.dac2 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+ if (byte_enable) {
+ child->thread.debug.dvc2 =
+ (unsigned long)bp_info->condition_value;
+ child->thread.debug.dbcr2 |=
+ ((byte_enable << DBCR2_DVC2BE_SHIFT) |
+ (condition_mode << DBCR2_DVC2M_SHIFT));
+ }
+#endif
+ } else
+ return -ENOSPC;
+ child->thread.debug.dbcr0 |= DBCR0_IDM;
+ child->thread.regs->msr |= MSR_DE;
+
+ return slot + 4;
+}
+
+static int del_dac(struct task_struct *child, int slot)
+{
+ if (slot == 1) {
+ if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
+ return -ENOENT;
+
+ child->thread.debug.dac1 = 0;
+ dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+ if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
+ child->thread.debug.dac2 = 0;
+ child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
+ }
+ child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+ child->thread.debug.dvc1 = 0;
+#endif
+ } else if (slot == 2) {
+ if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
+ return -ENOENT;
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+ if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
+ /* Part of a range */
+ return -EINVAL;
+ child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+ child->thread.debug.dvc2 = 0;
+#endif
+ child->thread.debug.dac2 = 0;
+ dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+static int set_dac_range(struct task_struct *child,
+ struct ppc_hw_breakpoint *bp_info)
+{
+ int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
+
+ /* We don't allow range watchpoints to be used with DVC */
+ if (bp_info->condition_mode)
+ return -EINVAL;
+
+ /*
+ * Best effort to verify the address range. The user/supervisor bits
+ * prevent trapping in kernel space, but let's fail on an obvious bad
+ * range. The simple test on the mask is not fool-proof, and any
+ * exclusive range will spill over into kernel space.
+ */
+ if (bp_info->addr >= TASK_SIZE)
+ return -EIO;
+ if (mode == PPC_BREAKPOINT_MODE_MASK) {
+ /*
+ * dac2 is a bitmask. Don't allow a mask that makes a
+ * kernel space address from a valid dac1 value
+ */
+ if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
+ return -EIO;
+ } else {
+ /*
+ * For range breakpoints, addr2 must also be a valid address
+ */
+ if (bp_info->addr2 >= TASK_SIZE)
+ return -EIO;
+ }
+
+ if (child->thread.debug.dbcr0 &
+ (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
+ return -ENOSPC;
+
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+ child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+ child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
+ child->thread.debug.dac1 = bp_info->addr;
+ child->thread.debug.dac2 = bp_info->addr2;
+ if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+ child->thread.debug.dbcr2 |= DBCR2_DAC12M;
+ else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+ child->thread.debug.dbcr2 |= DBCR2_DAC12MX;
+ else /* PPC_BREAKPOINT_MODE_MASK */
+ child->thread.debug.dbcr2 |= DBCR2_DAC12MM;
+ child->thread.regs->msr |= MSR_DE;
+
+ return 5;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
+
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+ if (bp_info->version != 1)
+ return -ENOTSUPP;
+ /*
+ * Check for invalid flags and combinations
+ */
+ if ((bp_info->trigger_type == 0) ||
+ (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
+ PPC_BREAKPOINT_TRIGGER_RW)) ||
+ (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
+ (bp_info->condition_mode &
+ ~(PPC_BREAKPOINT_CONDITION_MODE |
+ PPC_BREAKPOINT_CONDITION_BE_ALL)))
+ return -EINVAL;
+#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
+ if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+ return -EINVAL;
+#endif
+
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
+ if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
+ (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
+ return -EINVAL;
+ return set_instruction_bp(child, bp_info);
+ }
+ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+ return set_dac(child, bp_info);
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+ return set_dac_range(child, bp_info);
+#else
+ return -EINVAL;
+#endif
+}
+
+long ppc_del_hwdebug(struct task_struct *child, long data)
+{
+ int rc;
+
+ if (data <= 4)
+ rc = del_instruction_bp(child, (int)data);
+ else
+ rc = del_dac(child, (int)data - 4);
+
+ if (!rc) {
+ if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
+ child->thread.debug.dbcr1)) {
+ child->thread.debug.dbcr0 &= ~DBCR0_IDM;
+ child->thread.regs->msr &= ~MSR_DE;
+ }
+ }
+ return rc;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index e12f6615fc1d..bdba09a87aea 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -174,3 +174,8 @@ int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
/* ptrace-view */
extern const struct user_regset_view user_ppc_native_view;
+
+/* ptrace-(no)adv */
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info);
+long ppc_del_hwdebug(struct task_struct *child, long data);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
new file mode 100644
index 000000000000..7db330c94538
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+void user_enable_single_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+ regs->msr &= ~MSR_BE;
+ regs->msr |= MSR_SE;
+ }
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_enable_block_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+ regs->msr &= ~MSR_SE;
+ regs->msr |= MSR_BE;
+ }
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL)
+ regs->msr &= ~(MSR_SE | MSR_BE);
+
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret;
+ struct thread_struct *thread = &(task->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+ bool set_bp = true;
+ struct arch_hw_breakpoint hw_brk;
+
+ /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+ * For embedded processors we support one DAC and no IAC's at the
+ * moment.
+ */
+ if (addr > 0)
+ return -EINVAL;
+
+ /* The bottom 3 bits in dabr are flags */
+ if ((data & ~0x7UL) >= TASK_SIZE)
+ return -EIO;
+
+ /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+ * It was assumed, on previous implementations, that 3 bits were
+ * passed together with the data address, fitting the design of the
+ * DABR register, as follows:
+ *
+ * bit 0: Read flag
+ * bit 1: Write flag
+ * bit 2: Breakpoint translation
+ *
+ * Thus, we use them here as so.
+ */
+
+ /* Ensure breakpoint translation bit is set */
+ if (data && !(data & HW_BRK_TYPE_TRANSLATE))
+ return -EIO;
+ hw_brk.address = data & (~HW_BRK_TYPE_DABR);
+ hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
+ hw_brk.len = 8;
+ set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ bp = thread->ptrace_bps[0];
+ if (!set_bp) {
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ }
+ return 0;
+ }
+ if (bp) {
+ attr = bp->attr;
+ attr.bp_addr = hw_brk.address;
+ arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
+
+ /* Enable breakpoint */
+ attr.disabled = false;
+
+ ret = modify_user_hw_breakpoint(bp, &attr);
+ if (ret) {
+ return ret;
+ }
+ thread->ptrace_bps[0] = bp;
+ thread->hw_brk = hw_brk;
+ return 0;
+ }
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = hw_brk.address;
+ attr.bp_len = 8;
+ arch_bp_generic_fields(hw_brk.type,
+ &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, NULL, task);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ return PTR_ERR(bp);
+ }
+
+#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+ if (set_bp && (!ppc_breakpoint_available()))
+ return -ENODEV;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+ task->thread.hw_brk = hw_brk;
+ return 0;
+}
+
+long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int len = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+ struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+ struct arch_hw_breakpoint brk;
+
+ if (bp_info->version != 1)
+ return -ENOTSUPP;
+ /*
+ * We only support one data breakpoint
+ */
+ if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
+ (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
+ bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+ return -EINVAL;
+
+ if ((unsigned long)bp_info->addr >= TASK_SIZE)
+ return -EIO;
+
+ brk.address = bp_info->addr & ~7UL;
+ brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.len = 8;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+ brk.type |= HW_BRK_TYPE_READ;
+ if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+ brk.type |= HW_BRK_TYPE_WRITE;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ /*
+ * Check if the request is for 'range' breakpoints. We can
+ * support it if range < 8 bytes.
+ */
+ if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+ len = bp_info->addr2 - bp_info->addr;
+ else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+ len = 1;
+ else
+ return -EINVAL;
+ bp = thread->ptrace_bps[0];
+ if (bp)
+ return -ENOSPC;
+
+ /* Create a new breakpoint request if one doesn't exist already */
+ hw_breakpoint_init(&attr);
+ attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
+ attr.bp_len = len;
+ arch_bp_generic_fields(brk.type, &attr.bp_type);
+
+ thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+ ptrace_triggered, NULL, child);
+ if (IS_ERR(bp)) {
+ thread->ptrace_bps[0] = NULL;
+ return PTR_ERR(bp);
+ }
+
+ return 1;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+ if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
+ return -EINVAL;
+
+ if (child->thread.hw_brk.address)
+ return -ENOSPC;
+
+ if (!ppc_breakpoint_available())
+ return -ENODEV;
+
+ child->thread.hw_brk = brk;
+
+ return 1;
+}
+
+long ppc_del_hwdebug(struct task_struct *child, long data)
+{
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ int ret = 0;
+ struct thread_struct *thread = &(child->thread);
+ struct perf_event *bp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+ if (data != 1)
+ return -EINVAL;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ bp = thread->ptrace_bps[0];
+ if (bp) {
+ unregister_hw_breakpoint(bp);
+ thread->ptrace_bps[0] = NULL;
+ } else
+ ret = -ENOENT;
+ return ret;
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
+ if (child->thread.hw_brk.address == 0)
+ return -ENOENT;
+
+ child->thread.hw_brk.address = 0;
+ child->thread.hw_brk.type = 0;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+ return 0;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 78068f513353..377e0e541d5f 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -50,71 +50,6 @@
#include <kernel/ptrace/ptrace-decl.h>
-void user_enable_single_step(struct task_struct *task)
-{
- struct pt_regs *regs = task->thread.regs;
-
- if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- task->thread.debug.dbcr0 &= ~DBCR0_BT;
- task->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
- regs->msr |= MSR_DE;
-#else
- regs->msr &= ~MSR_BE;
- regs->msr |= MSR_SE;
-#endif
- }
- set_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
-void user_enable_block_step(struct task_struct *task)
-{
- struct pt_regs *regs = task->thread.regs;
-
- if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- task->thread.debug.dbcr0 &= ~DBCR0_IC;
- task->thread.debug.dbcr0 = DBCR0_IDM | DBCR0_BT;
- regs->msr |= MSR_DE;
-#else
- regs->msr &= ~MSR_SE;
- regs->msr |= MSR_BE;
-#endif
- }
- set_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
- struct pt_regs *regs = task->thread.regs;
-
- if (regs != NULL) {
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- /*
- * The logic to disable single stepping should be as
- * simple as turning off the Instruction Complete flag.
- * And, after doing so, if all debug flags are off, turn
- * off DBCR0(IDM) and MSR(DE) .... Torez
- */
- task->thread.debug.dbcr0 &= ~(DBCR0_IC|DBCR0_BT);
- /*
- * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
- */
- if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
- task->thread.debug.dbcr1)) {
- /*
- * All debug events were off.....
- */
- task->thread.debug.dbcr0 &= ~DBCR0_IDM;
- regs->msr &= ~MSR_DE;
- }
-#else
- regs->msr &= ~(MSR_SE | MSR_BE);
-#endif
- }
- clear_tsk_thread_flag(task, TIF_SINGLESTEP);
-}
-
#ifdef CONFIG_HAVE_HW_BREAKPOINT
void ptrace_triggered(struct perf_event *bp,
struct perf_sample_data *data, struct pt_regs *regs)
@@ -133,136 +68,6 @@ void ptrace_triggered(struct perf_event *bp,
}
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
- unsigned long data)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- int ret;
- struct thread_struct *thread = &(task->thread);
- struct perf_event *bp;
- struct perf_event_attr attr;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
- bool set_bp = true;
- struct arch_hw_breakpoint hw_brk;
-#endif
-
- /* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
- * For embedded processors we support one DAC and no IAC's at the
- * moment.
- */
- if (addr > 0)
- return -EINVAL;
-
- /* The bottom 3 bits in dabr are flags */
- if ((data & ~0x7UL) >= TASK_SIZE)
- return -EIO;
-
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
- /* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
- * It was assumed, on previous implementations, that 3 bits were
- * passed together with the data address, fitting the design of the
- * DABR register, as follows:
- *
- * bit 0: Read flag
- * bit 1: Write flag
- * bit 2: Breakpoint translation
- *
- * Thus, we use them here as so.
- */
-
- /* Ensure breakpoint translation bit is set */
- if (data && !(data & HW_BRK_TYPE_TRANSLATE))
- return -EIO;
- hw_brk.address = data & (~HW_BRK_TYPE_DABR);
- hw_brk.type = (data & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
- hw_brk.len = 8;
- set_bp = (data) && (hw_brk.type & HW_BRK_TYPE_RDWR);
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- bp = thread->ptrace_bps[0];
- if (!set_bp) {
- if (bp) {
- unregister_hw_breakpoint(bp);
- thread->ptrace_bps[0] = NULL;
- }
- return 0;
- }
- if (bp) {
- attr = bp->attr;
- attr.bp_addr = hw_brk.address;
- arch_bp_generic_fields(hw_brk.type, &attr.bp_type);
-
- /* Enable breakpoint */
- attr.disabled = false;
-
- ret = modify_user_hw_breakpoint(bp, &attr);
- if (ret) {
- return ret;
- }
- thread->ptrace_bps[0] = bp;
- thread->hw_brk = hw_brk;
- return 0;
- }
-
- /* Create a new breakpoint request if one doesn't exist already */
- hw_breakpoint_init(&attr);
- attr.bp_addr = hw_brk.address;
- attr.bp_len = 8;
- arch_bp_generic_fields(hw_brk.type,
- &attr.bp_type);
-
- thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
- ptrace_triggered, NULL, task);
- if (IS_ERR(bp)) {
- thread->ptrace_bps[0] = NULL;
- return PTR_ERR(bp);
- }
-
-#else /* !CONFIG_HAVE_HW_BREAKPOINT */
- if (set_bp && (!ppc_breakpoint_available()))
- return -ENODEV;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
- task->thread.hw_brk = hw_brk;
-#else /* CONFIG_PPC_ADV_DEBUG_REGS */
- /* As described above, it was assumed 3 bits were passed with the data
- * address, but we will assume only the mode bits will be passed
- * as to not cause alignment restrictions for DAC-based processors.
- */
-
- /* DAC's hold the whole address without any mode flags */
- task->thread.debug.dac1 = data & ~0x3UL;
-
- if (task->thread.debug.dac1 == 0) {
- dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
- if (!DBCR_ACTIVE_EVENTS(task->thread.debug.dbcr0,
- task->thread.debug.dbcr1)) {
- task->thread.regs->msr &= ~MSR_DE;
- task->thread.debug.dbcr0 &= ~DBCR0_IDM;
- }
- return 0;
- }
-
- /* Read or Write bits must be set */
-
- if (!(data & 0x3UL))
- return -EINVAL;
-
- /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
- register */
- task->thread.debug.dbcr0 |= DBCR0_IDM;
-
- /* Check for write and read flags and set DBCR0
- accordingly */
- dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
- if (data & 0x1UL)
- dbcr_dac(task) |= DBCR_DAC1R;
- if (data & 0x2UL)
- dbcr_dac(task) |= DBCR_DAC1W;
- task->thread.regs->msr |= MSR_DE;
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
- return 0;
-}
-
/*
* Called by kernel/ptrace.c when detaching..
*
@@ -275,463 +80,6 @@ void ptrace_disable(struct task_struct *child)
clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
}
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-static long set_instruction_bp(struct task_struct *child,
- struct ppc_hw_breakpoint *bp_info)
-{
- int slot;
- int slot1_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC1) != 0);
- int slot2_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC2) != 0);
- int slot3_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC3) != 0);
- int slot4_in_use = ((child->thread.debug.dbcr0 & DBCR0_IAC4) != 0);
-
- if (dbcr_iac_range(child) & DBCR_IAC12MODE)
- slot2_in_use = 1;
- if (dbcr_iac_range(child) & DBCR_IAC34MODE)
- slot4_in_use = 1;
-
- if (bp_info->addr >= TASK_SIZE)
- return -EIO;
-
- if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
-
- /* Make sure range is valid. */
- if (bp_info->addr2 >= TASK_SIZE)
- return -EIO;
-
- /* We need a pair of IAC regsisters */
- if ((!slot1_in_use) && (!slot2_in_use)) {
- slot = 1;
- child->thread.debug.iac1 = bp_info->addr;
- child->thread.debug.iac2 = bp_info->addr2;
- child->thread.debug.dbcr0 |= DBCR0_IAC1;
- if (bp_info->addr_mode ==
- PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
- dbcr_iac_range(child) |= DBCR_IAC12X;
- else
- dbcr_iac_range(child) |= DBCR_IAC12I;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
- } else if ((!slot3_in_use) && (!slot4_in_use)) {
- slot = 3;
- child->thread.debug.iac3 = bp_info->addr;
- child->thread.debug.iac4 = bp_info->addr2;
- child->thread.debug.dbcr0 |= DBCR0_IAC3;
- if (bp_info->addr_mode ==
- PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
- dbcr_iac_range(child) |= DBCR_IAC34X;
- else
- dbcr_iac_range(child) |= DBCR_IAC34I;
-#endif
- } else
- return -ENOSPC;
- } else {
- /* We only need one. If possible leave a pair free in
- * case a range is needed later
- */
- if (!slot1_in_use) {
- /*
- * Don't use iac1 if iac1-iac2 are free and either
- * iac3 or iac4 (but not both) are free
- */
- if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
- slot = 1;
- child->thread.debug.iac1 = bp_info->addr;
- child->thread.debug.dbcr0 |= DBCR0_IAC1;
- goto out;
- }
- }
- if (!slot2_in_use) {
- slot = 2;
- child->thread.debug.iac2 = bp_info->addr;
- child->thread.debug.dbcr0 |= DBCR0_IAC2;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
- } else if (!slot3_in_use) {
- slot = 3;
- child->thread.debug.iac3 = bp_info->addr;
- child->thread.debug.dbcr0 |= DBCR0_IAC3;
- } else if (!slot4_in_use) {
- slot = 4;
- child->thread.debug.iac4 = bp_info->addr;
- child->thread.debug.dbcr0 |= DBCR0_IAC4;
-#endif
- } else
- return -ENOSPC;
- }
-out:
- child->thread.debug.dbcr0 |= DBCR0_IDM;
- child->thread.regs->msr |= MSR_DE;
-
- return slot;
-}
-
-static int del_instruction_bp(struct task_struct *child, int slot)
-{
- switch (slot) {
- case 1:
- if ((child->thread.debug.dbcr0 & DBCR0_IAC1) == 0)
- return -ENOENT;
-
- if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
- /* address range - clear slots 1 & 2 */
- child->thread.debug.iac2 = 0;
- dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
- }
- child->thread.debug.iac1 = 0;
- child->thread.debug.dbcr0 &= ~DBCR0_IAC1;
- break;
- case 2:
- if ((child->thread.debug.dbcr0 & DBCR0_IAC2) == 0)
- return -ENOENT;
-
- if (dbcr_iac_range(child) & DBCR_IAC12MODE)
- /* used in a range */
- return -EINVAL;
- child->thread.debug.iac2 = 0;
- child->thread.debug.dbcr0 &= ~DBCR0_IAC2;
- break;
-#if CONFIG_PPC_ADV_DEBUG_IACS > 2
- case 3:
- if ((child->thread.debug.dbcr0 & DBCR0_IAC3) == 0)
- return -ENOENT;
-
- if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
- /* address range - clear slots 3 & 4 */
- child->thread.debug.iac4 = 0;
- dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
- }
- child->thread.debug.iac3 = 0;
- child->thread.debug.dbcr0 &= ~DBCR0_IAC3;
- break;
- case 4:
- if ((child->thread.debug.dbcr0 & DBCR0_IAC4) == 0)
- return -ENOENT;
-
- if (dbcr_iac_range(child) & DBCR_IAC34MODE)
- /* Used in a range */
- return -EINVAL;
- child->thread.debug.iac4 = 0;
- child->thread.debug.dbcr0 &= ~DBCR0_IAC4;
- break;
-#endif
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
-{
- int byte_enable =
- (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
- & 0xf;
- int condition_mode =
- bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
- int slot;
-
- if (byte_enable && (condition_mode == 0))
- return -EINVAL;
-
- if (bp_info->addr >= TASK_SIZE)
- return -EIO;
-
- if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
- slot = 1;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
- dbcr_dac(child) |= DBCR_DAC1R;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
- dbcr_dac(child) |= DBCR_DAC1W;
- child->thread.debug.dac1 = (unsigned long)bp_info->addr;
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
- if (byte_enable) {
- child->thread.debug.dvc1 =
- (unsigned long)bp_info->condition_value;
- child->thread.debug.dbcr2 |=
- ((byte_enable << DBCR2_DVC1BE_SHIFT) |
- (condition_mode << DBCR2_DVC1M_SHIFT));
- }
-#endif
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
- } else if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
- /* Both dac1 and dac2 are part of a range */
- return -ENOSPC;
-#endif
- } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
- slot = 2;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
- dbcr_dac(child) |= DBCR_DAC2R;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
- dbcr_dac(child) |= DBCR_DAC2W;
- child->thread.debug.dac2 = (unsigned long)bp_info->addr;
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
- if (byte_enable) {
- child->thread.debug.dvc2 =
- (unsigned long)bp_info->condition_value;
- child->thread.debug.dbcr2 |=
- ((byte_enable << DBCR2_DVC2BE_SHIFT) |
- (condition_mode << DBCR2_DVC2M_SHIFT));
- }
-#endif
- } else
- return -ENOSPC;
- child->thread.debug.dbcr0 |= DBCR0_IDM;
- child->thread.regs->msr |= MSR_DE;
-
- return slot + 4;
-}
-
-static int del_dac(struct task_struct *child, int slot)
-{
- if (slot == 1) {
- if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
- return -ENOENT;
-
- child->thread.debug.dac1 = 0;
- dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
- if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE) {
- child->thread.debug.dac2 = 0;
- child->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
- }
- child->thread.debug.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
-#endif
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
- child->thread.debug.dvc1 = 0;
-#endif
- } else if (slot == 2) {
- if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
- return -ENOENT;
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
- if (child->thread.debug.dbcr2 & DBCR2_DAC12MODE)
- /* Part of a range */
- return -EINVAL;
- child->thread.debug.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
-#endif
-#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
- child->thread.debug.dvc2 = 0;
-#endif
- child->thread.debug.dac2 = 0;
- dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
- } else
- return -EINVAL;
-
- return 0;
-}
-#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-static int set_dac_range(struct task_struct *child,
- struct ppc_hw_breakpoint *bp_info)
-{
- int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
-
- /* We don't allow range watchpoints to be used with DVC */
- if (bp_info->condition_mode)
- return -EINVAL;
-
- /*
- * Best effort to verify the address range. The user/supervisor bits
- * prevent trapping in kernel space, but let's fail on an obvious bad
- * range. The simple test on the mask is not fool-proof, and any
- * exclusive range will spill over into kernel space.
- */
- if (bp_info->addr >= TASK_SIZE)
- return -EIO;
- if (mode == PPC_BREAKPOINT_MODE_MASK) {
- /*
- * dac2 is a bitmask. Don't allow a mask that makes a
- * kernel space address from a valid dac1 value
- */
- if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
- return -EIO;
- } else {
- /*
- * For range breakpoints, addr2 must also be a valid address
- */
- if (bp_info->addr2 >= TASK_SIZE)
- return -EIO;
- }
-
- if (child->thread.debug.dbcr0 &
- (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
- return -ENOSPC;
-
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
- child->thread.debug.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
- child->thread.debug.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
- child->thread.debug.dac1 = bp_info->addr;
- child->thread.debug.dac2 = bp_info->addr2;
- if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
- child->thread.debug.dbcr2 |= DBCR2_DAC12M;
- else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
- child->thread.debug.dbcr2 |= DBCR2_DAC12MX;
- else /* PPC_BREAKPOINT_MODE_MASK */
- child->thread.debug.dbcr2 |= DBCR2_DAC12MM;
- child->thread.regs->msr |= MSR_DE;
-
- return 5;
-}
-#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
-
-static long ppc_set_hwdebug(struct task_struct *child,
- struct ppc_hw_breakpoint *bp_info)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- int len = 0;
- struct thread_struct *thread = &(child->thread);
- struct perf_event *bp;
- struct perf_event_attr attr;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
- struct arch_hw_breakpoint brk;
-#endif
-
- if (bp_info->version != 1)
- return -ENOTSUPP;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- /*
- * Check for invalid flags and combinations
- */
- if ((bp_info->trigger_type == 0) ||
- (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
- PPC_BREAKPOINT_TRIGGER_RW)) ||
- (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
- (bp_info->condition_mode &
- ~(PPC_BREAKPOINT_CONDITION_MODE |
- PPC_BREAKPOINT_CONDITION_BE_ALL)))
- return -EINVAL;
-#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
- if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
- return -EINVAL;
-#endif
-
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
- if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
- (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
- return -EINVAL;
- return set_instruction_bp(child, bp_info);
- }
- if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
- return set_dac(child, bp_info);
-
-#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
- return set_dac_range(child, bp_info);
-#else
- return -EINVAL;
-#endif
-#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
- /*
- * We only support one data breakpoint
- */
- if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
- (bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
- bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
- return -EINVAL;
-
- if ((unsigned long)bp_info->addr >= TASK_SIZE)
- return -EIO;
-
- brk.address = bp_info->addr & ~7UL;
- brk.type = HW_BRK_TYPE_TRANSLATE;
- brk.len = 8;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
- brk.type |= HW_BRK_TYPE_READ;
- if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
- brk.type |= HW_BRK_TYPE_WRITE;
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- /*
- * Check if the request is for 'range' breakpoints. We can
- * support it if range < 8 bytes.
- */
- if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
- len = bp_info->addr2 - bp_info->addr;
- else if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
- len = 1;
- else
- return -EINVAL;
- bp = thread->ptrace_bps[0];
- if (bp)
- return -ENOSPC;
-
- /* Create a new breakpoint request if one doesn't exist already */
- hw_breakpoint_init(&attr);
- attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
- attr.bp_len = len;
- arch_bp_generic_fields(brk.type, &attr.bp_type);
-
- thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
- ptrace_triggered, NULL, child);
- if (IS_ERR(bp)) {
- thread->ptrace_bps[0] = NULL;
- return PTR_ERR(bp);
- }
-
- return 1;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
- if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
- return -EINVAL;
-
- if (child->thread.hw_brk.address)
- return -ENOSPC;
-
- if (!ppc_breakpoint_available())
- return -ENODEV;
-
- child->thread.hw_brk = brk;
-
- return 1;
-#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
-}
-
-static long ppc_del_hwdebug(struct task_struct *child, long data)
-{
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- int ret = 0;
- struct thread_struct *thread = &(child->thread);
- struct perf_event *bp;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- int rc;
-
- if (data <= 4)
- rc = del_instruction_bp(child, (int)data);
- else
- rc = del_dac(child, (int)data - 4);
-
- if (!rc) {
- if (!DBCR_ACTIVE_EVENTS(child->thread.debug.dbcr0,
- child->thread.debug.dbcr1)) {
- child->thread.debug.dbcr0 &= ~DBCR0_IDM;
- child->thread.regs->msr &= ~MSR_DE;
- }
- }
- return rc;
-#else
- if (data != 1)
- return -EINVAL;
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
- bp = thread->ptrace_bps[0];
- if (bp) {
- unregister_hw_breakpoint(bp);
- thread->ptrace_bps[0] = NULL;
- } else
- ret = -ENOENT;
- return ret;
-#else /* CONFIG_HAVE_HW_BREAKPOINT */
- if (child->thread.hw_brk.address == 0)
- return -ENOENT;
-
- child->thread.hw_brk.address = 0;
- child->thread.hw_brk.type = 0;
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
- return 0;
-#endif
-}
-
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 07/12] powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Move TRANSACTIONAL_MEM functions out of ptrace.c, into
ptrace-tm.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 1 +
arch/powerpc/kernel/ptrace/ptrace-decl.h | 89 +++
arch/powerpc/kernel/ptrace/ptrace-tm.c | 879 +++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 915 +------------------------------
4 files changed, 971 insertions(+), 913 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-tm.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index f87eadf6e072..2d7f5f301536 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -13,3 +13,4 @@ obj-y += ptrace-novsx.o
endif
obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
obj-$(CONFIG_SPE) += ptrace-spe.o
+obj-$(CONFIG_PPC_TRANSACTIONAL_MEM) += ptrace-tm.o
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 8a362f97f1d6..8d076818f1de 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -1,5 +1,27 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Set of msr bits that gdb can change on behalf of a process.
+ */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#define MSR_DEBUGCHANGE 0
+#else
+#define MSR_DEBUGCHANGE (MSR_SE | MSR_BE)
+#endif
+
+/*
+ * Max register writeable via put_reg
+ */
+#ifdef CONFIG_PPC32
+#define PT_MAX_PUT_REG PT_MQ
+#else
+#define PT_MAX_PUT_REG PT_CCR
+#endif
+
+#define TVSO(f) (offsetof(struct thread_vr_state, f))
+#define TFSO(f) (offsetof(struct thread_fp_state, f))
+#define TSO(f) (offsetof(struct thread_struct, f))
+
/* ptrace-(no)vsx */
int fpr_get(struct task_struct *target, const struct user_regset *regset,
@@ -37,8 +59,75 @@ int evr_set(struct task_struct *target, const struct user_regset *regset,
/* ptrace */
+int gpr32_get_common(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf,
+ unsigned long *regs);
+int gpr32_set_common(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf,
+ unsigned long *regs);
+
+/* ptrace-tm */
+
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
void flush_tmregs_to_thread(struct task_struct *tsk);
#else
static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
#endif
+
+int tm_cgpr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cgpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cgpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_cfpr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cfpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cfpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_cvmx_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cvmx_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cvmx_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_cvsx_active(struct task_struct *target, const struct user_regset *regset);
+int tm_cvsx_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cvsx_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_spr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_spr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_spr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_tar_active(struct task_struct *target, const struct user_regset *regset);
+int tm_tar_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_tar_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_ppr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_ppr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_ppr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_dscr_active(struct task_struct *target, const struct user_regset *regset);
+int tm_dscr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_dscr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+int tm_cgpr32_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-tm.c b/arch/powerpc/kernel/ptrace/ptrace-tm.c
new file mode 100644
index 000000000000..a0bf210901c0
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-tm.c
@@ -0,0 +1,879 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+void flush_tmregs_to_thread(struct task_struct *tsk)
+{
+ /*
+ * If task is not current, it will have been flushed already to
+ * it's thread_struct during __switch_to().
+ *
+ * A reclaim flushes ALL the state or if not in TM save TM SPRs
+ * in the appropriate thread structures from live.
+ */
+
+ if ((!cpu_has_feature(CPU_FTR_TM)) || (tsk != current))
+ return;
+
+ if (MSR_TM_SUSPENDED(mfmsr())) {
+ tm_reclaim_current(TM_CAUSE_SIGNAL);
+ } else {
+ tm_enable();
+ tm_save_sprs(&(tsk->thread));
+ }
+}
+
+static unsigned long get_user_ckpt_msr(struct task_struct *task)
+{
+ return task->thread.ckpt_regs.msr | task->thread.fpexc_mode;
+}
+
+static int set_user_ckpt_msr(struct task_struct *task, unsigned long msr)
+{
+ task->thread.ckpt_regs.msr &= ~MSR_DEBUGCHANGE;
+ task->thread.ckpt_regs.msr |= msr & MSR_DEBUGCHANGE;
+ return 0;
+}
+
+static int set_user_ckpt_trap(struct task_struct *task, unsigned long trap)
+{
+ task->thread.ckpt_regs.trap = trap & 0xfff0;
+ return 0;
+}
+
+/**
+ * tm_cgpr_active - get active number of registers in CGPR
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed GPR category.
+ */
+int tm_cgpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return 0;
+
+ return regset->n;
+}
+
+/**
+ * tm_cgpr_get - get CGPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds all the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function gets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * struct pt_regs ckpt_regs;
+ * };
+ */
+int tm_cgpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs,
+ 0, offsetof(struct pt_regs, msr));
+ if (!ret) {
+ unsigned long msr = get_user_ckpt_msr(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
+ offsetof(struct pt_regs, msr),
+ offsetof(struct pt_regs, msr) +
+ sizeof(msr));
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs.orig_gpr3,
+ offsetof(struct pt_regs, orig_gpr3),
+ sizeof(struct user_pt_regs));
+ if (!ret)
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ sizeof(struct user_pt_regs), -1);
+
+ return ret;
+}
+
+/*
+ * tm_cgpr_set - set the CGPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed GPR registers.
+ *
+ * When the transaction is active, 'ckpt_regs' holds the checkpointed
+ * GPR register values for the current transaction to fall back on if it
+ * aborts in between. This function sets those checkpointed GPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * struct pt_regs ckpt_regs;
+ * };
+ */
+int tm_cgpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ unsigned long reg;
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs,
+ 0, PT_MSR * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_MSR * sizeof(reg),
+ (PT_MSR + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_ckpt_msr(target, reg);
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckpt_regs.orig_gpr3,
+ PT_ORIG_R3 * sizeof(reg),
+ (PT_MAX_PUT_REG + 1) * sizeof(reg));
+
+ if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_MAX_PUT_REG + 1) * sizeof(reg),
+ PT_TRAP * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_TRAP * sizeof(reg),
+ (PT_TRAP + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_ckpt_trap(target, reg);
+ }
+
+ if (!ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_TRAP + 1) * sizeof(reg), -1);
+
+ return ret;
+}
+
+/**
+ * tm_cfpr_active - get active number of registers in CFPR
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed FPR category.
+ */
+int tm_cfpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return 0;
+
+ return regset->n;
+}
+
+/**
+ * tm_cfpr_get - get CFPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed FPR registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * values for the current transaction to fall back on if it aborts
+ * in between. This function gets those checkpointed FPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ *};
+ */
+int tm_cfpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ u64 buf[33];
+ int i;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ /* copy to local buffer then write that out */
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.TS_CKFPR(i);
+ buf[32] = target->thread.ckfp_state.fpscr;
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+}
+
+/**
+ * tm_cfpr_set - set CFPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed FPR registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * FPR register values for the current transaction to fall back on
+ * if it aborts in between. This function sets these checkpointed
+ * FPR registers. The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ *};
+ */
+int tm_cfpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ u64 buf[33];
+ int i;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ for (i = 0; i < 32; i++)
+ buf[i] = target->thread.TS_CKFPR(i);
+ buf[32] = target->thread.ckfp_state.fpscr;
+
+ /* copy to local buffer then write that out */
+ i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+ if (i)
+ return i;
+ for (i = 0; i < 32 ; i++)
+ target->thread.TS_CKFPR(i) = buf[i];
+ target->thread.ckfp_state.fpscr = buf[32];
+ return 0;
+}
+
+/**
+ * tm_cvmx_active - get active number of registers in CVMX
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in checkpointed VMX category.
+ */
+int tm_cvmx_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return 0;
+
+ return regset->n;
+}
+
+/**
+ * tm_cvmx_get - get CMVX registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed VMX registers.
+ *
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
+ * the checkpointed values for the current transaction to fall
+ * back on if it aborts in between. The userspace interface buffer
+ * layout is as follows.
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ *};
+ */
+int tm_cvmx_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ /* Flush the state */
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckvr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret) {
+ /*
+ * Copy out only the low-order word of vrsave.
+ */
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+ vrsave.word = target->thread.ckvrsave;
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+ 33 * sizeof(vector128), -1);
+ }
+
+ return ret;
+}
+
+/**
+ * tm_cvmx_set - set CMVX registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed VMX registers.
+ *
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
+ * the checkpointed values for the current transaction to fall
+ * back on if it aborts in between. The userspace interface buffer
+ * layout is as follows.
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ *};
+ */
+int tm_cvmx_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ckvr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret && count > 0) {
+ /*
+ * We use only the low-order word of vrsave.
+ */
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+ vrsave.word = target->thread.ckvrsave;
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+ 33 * sizeof(vector128), -1);
+ if (!ret)
+ target->thread.ckvrsave = vrsave.word;
+ }
+
+ return ret;
+}
+
+/**
+ * tm_cvsx_active - get active number of registers in CVSX
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks for the active number of available
+ * regisers in transaction checkpointed VSX category.
+ */
+int tm_cvsx_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return 0;
+
+ flush_vsx_to_thread(target);
+ return target->thread.used_vsr ? regset->n : 0;
+}
+
+/**
+ * tm_cvsx_get - get CVSX registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets in transaction checkpointed VSX registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * values for the current transaction to fall back on if it aborts
+ * in between. This function gets those checkpointed VSX registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * u64 vsx[32];
+ *};
+ */
+int tm_cvsx_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ u64 buf[32];
+ int ret, i;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ /* Flush the state */
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_vsx_to_thread(target);
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ buf, 0, 32 * sizeof(double));
+
+ return ret;
+}
+
+/**
+ * tm_cvsx_set - set CFPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets in transaction checkpointed VSX registers.
+ *
+ * When the transaction is active 'ckfp_state' holds the checkpointed
+ * VSX register values for the current transaction to fall back on
+ * if it aborts in between. This function sets these checkpointed
+ * FPR registers. The userspace interface buffer layout is as follows.
+ *
+ * struct data {
+ * u64 vsx[32];
+ *};
+ */
+int tm_cvsx_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ u64 buf[32];
+ int ret, i;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ /* Flush the state */
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_vsx_to_thread(target);
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ buf, 0, 32 * sizeof(double));
+ if (!ret)
+ for (i = 0; i < 32 ; i++)
+ target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+ return ret;
+}
+
+/**
+ * tm_spr_active - get active number of registers in TM SPR
+ * @target: The target task.
+ * @regset: The user regset structure.
+ *
+ * This function checks the active number of available
+ * regisers in the transactional memory SPR category.
+ */
+int tm_spr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ return regset->n;
+}
+
+/**
+ * tm_spr_get - get the TM related SPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy from.
+ * @ubuf: User buffer to copy into.
+ *
+ * This function gets transactional memory related SPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct {
+ * u64 tm_tfhar;
+ * u64 tm_texasr;
+ * u64 tm_tfiar;
+ * };
+ */
+int tm_spr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ /* Build tests */
+ BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
+ BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
+ BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ /* Flush the states */
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ /* TFHAR register */
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tfhar, 0, sizeof(u64));
+
+ /* TEXASR register */
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_texasr, sizeof(u64),
+ 2 * sizeof(u64));
+
+ /* TFIAR register */
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tfiar,
+ 2 * sizeof(u64), 3 * sizeof(u64));
+ return ret;
+}
+
+/**
+ * tm_spr_set - set the TM related SPR registers
+ * @target: The target task.
+ * @regset: The user regset structure.
+ * @pos: The buffer position.
+ * @count: Number of bytes to copy.
+ * @kbuf: Kernel buffer to copy into.
+ * @ubuf: User buffer to copy from.
+ *
+ * This function sets transactional memory related SPR registers.
+ * The userspace interface buffer layout is as follows.
+ *
+ * struct {
+ * u64 tm_tfhar;
+ * u64 tm_texasr;
+ * u64 tm_tfiar;
+ * };
+ */
+int tm_spr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ /* Build tests */
+ BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
+ BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
+ BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ /* Flush the states */
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+
+ /* TFHAR register */
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tfhar, 0, sizeof(u64));
+
+ /* TEXASR register */
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_texasr, sizeof(u64),
+ 2 * sizeof(u64));
+
+ /* TFIAR register */
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tfiar,
+ 2 * sizeof(u64), 3 * sizeof(u64));
+ return ret;
+}
+
+int tm_tar_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ return regset->n;
+
+ return 0;
+}
+
+int tm_tar_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tar, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_tar_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_tar, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_ppr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ return regset->n;
+
+ return 0;
+}
+
+
+int tm_ppr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_ppr, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_ppr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_ppr, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_dscr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (MSR_TM_ACTIVE(target->thread.regs->msr))
+ return regset->n;
+
+ return 0;
+}
+
+int tm_dscr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_dscr, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_dscr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_TM))
+ return -ENODEV;
+
+ if (!MSR_TM_ACTIVE(target->thread.regs->msr))
+ return -ENODATA;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tm_dscr, 0, sizeof(u64));
+ return ret;
+}
+
+int tm_cgpr32_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+ &target->thread.ckpt_regs.gpr[0]);
+}
+
+int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+ &target->thread.ckpt_regs.gpr[0]);
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 711cccdc14e4..9e06e8dc4297 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -62,10 +62,6 @@ struct pt_regs_offset {
{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
#define REG_OFFSET_END {.name = NULL, .offset = 0}
-#define TVSO(f) (offsetof(struct thread_vr_state, f))
-#define TFSO(f) (offsetof(struct thread_fp_state, f))
-#define TSO(f) (offsetof(struct thread_struct, f))
-
static const struct pt_regs_offset regoffset_table[] = {
GPR_OFFSET_NAME(0),
GPR_OFFSET_NAME(1),
@@ -113,29 +109,6 @@ static const struct pt_regs_offset regoffset_table[] = {
REG_OFFSET_END,
};
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-void flush_tmregs_to_thread(struct task_struct *tsk)
-{
- /*
- * If task is not current, it will have been flushed already to
- * it's thread_struct during __switch_to().
- *
- * A reclaim flushes ALL the state or if not in TM save TM SPRs
- * in the appropriate thread structures from live.
- */
-
- if ((!cpu_has_feature(CPU_FTR_TM)) || (tsk != current))
- return;
-
- if (MSR_TM_SUSPENDED(mfmsr())) {
- tm_reclaim_current(TM_CAUSE_SIGNAL);
- } else {
- tm_enable();
- tm_save_sprs(&(tsk->thread));
- }
-}
-#endif
-
/**
* regs_query_register_offset() - query register offset from its name
* @name: the name of a register
@@ -173,24 +146,6 @@ const char *regs_query_register_name(unsigned int offset)
* in exit.c or in signal.c.
*/
-/*
- * Set of msr bits that gdb can change on behalf of a process.
- */
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-#define MSR_DEBUGCHANGE 0
-#else
-#define MSR_DEBUGCHANGE (MSR_SE | MSR_BE)
-#endif
-
-/*
- * Max register writeable via put_reg
- */
-#ifdef CONFIG_PPC32
-#define PT_MAX_PUT_REG PT_MQ
-#else
-#define PT_MAX_PUT_REG PT_CCR
-#endif
-
static unsigned long get_user_msr(struct task_struct *task)
{
return task->thread.regs->msr | task->thread.fpexc_mode;
@@ -203,26 +158,6 @@ static int set_user_msr(struct task_struct *task, unsigned long msr)
return 0;
}
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static unsigned long get_user_ckpt_msr(struct task_struct *task)
-{
- return task->thread.ckpt_regs.msr | task->thread.fpexc_mode;
-}
-
-static int set_user_ckpt_msr(struct task_struct *task, unsigned long msr)
-{
- task->thread.ckpt_regs.msr &= ~MSR_DEBUGCHANGE;
- task->thread.ckpt_regs.msr |= msr & MSR_DEBUGCHANGE;
- return 0;
-}
-
-static int set_user_ckpt_trap(struct task_struct *task, unsigned long trap)
-{
- task->thread.ckpt_regs.trap = trap & 0xfff0;
- return 0;
-}
-#endif
-
#ifdef CONFIG_PPC64
static int get_user_dscr(struct task_struct *task, unsigned long *data)
{
@@ -415,832 +350,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/**
- * tm_cgpr_active - get active number of registers in CGPR
- * @target: The target task.
- * @regset: The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed GPR category.
- */
-static int tm_cgpr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return 0;
-
- return regset->n;
-}
-
-/**
- * tm_cgpr_get - get CGPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy from.
- * @ubuf: User buffer to copy into.
- *
- * This function gets transaction checkpointed GPR registers.
- *
- * When the transaction is active, 'ckpt_regs' holds all the checkpointed
- * GPR register values for the current transaction to fall back on if it
- * aborts in between. This function gets those checkpointed GPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- * struct pt_regs ckpt_regs;
- * };
- */
-static int tm_cgpr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckpt_regs,
- 0, offsetof(struct pt_regs, msr));
- if (!ret) {
- unsigned long msr = get_user_ckpt_msr(target);
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
- offsetof(struct pt_regs, msr),
- offsetof(struct pt_regs, msr) +
- sizeof(msr));
- }
-
- BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
- offsetof(struct pt_regs, msr) + sizeof(long));
-
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckpt_regs.orig_gpr3,
- offsetof(struct pt_regs, orig_gpr3),
- sizeof(struct user_pt_regs));
- if (!ret)
- ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
- sizeof(struct user_pt_regs), -1);
-
- return ret;
-}
-
-/*
- * tm_cgpr_set - set the CGPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy into.
- * @ubuf: User buffer to copy from.
- *
- * This function sets in transaction checkpointed GPR registers.
- *
- * When the transaction is active, 'ckpt_regs' holds the checkpointed
- * GPR register values for the current transaction to fall back on if it
- * aborts in between. This function sets those checkpointed GPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- * struct pt_regs ckpt_regs;
- * };
- */
-static int tm_cgpr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- unsigned long reg;
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckpt_regs,
- 0, PT_MSR * sizeof(reg));
-
- if (!ret && count > 0) {
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
- PT_MSR * sizeof(reg),
- (PT_MSR + 1) * sizeof(reg));
- if (!ret)
- ret = set_user_ckpt_msr(target, reg);
- }
-
- BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
- offsetof(struct pt_regs, msr) + sizeof(long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckpt_regs.orig_gpr3,
- PT_ORIG_R3 * sizeof(reg),
- (PT_MAX_PUT_REG + 1) * sizeof(reg));
-
- if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
- ret = user_regset_copyin_ignore(
- &pos, &count, &kbuf, &ubuf,
- (PT_MAX_PUT_REG + 1) * sizeof(reg),
- PT_TRAP * sizeof(reg));
-
- if (!ret && count > 0) {
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
- PT_TRAP * sizeof(reg),
- (PT_TRAP + 1) * sizeof(reg));
- if (!ret)
- ret = set_user_ckpt_trap(target, reg);
- }
-
- if (!ret)
- ret = user_regset_copyin_ignore(
- &pos, &count, &kbuf, &ubuf,
- (PT_TRAP + 1) * sizeof(reg), -1);
-
- return ret;
-}
-
-/**
- * tm_cfpr_active - get active number of registers in CFPR
- * @target: The target task.
- * @regset: The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed FPR category.
- */
-static int tm_cfpr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return 0;
-
- return regset->n;
-}
-
-/**
- * tm_cfpr_get - get CFPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy from.
- * @ubuf: User buffer to copy into.
- *
- * This function gets in transaction checkpointed FPR registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * values for the current transaction to fall back on if it aborts
- * in between. This function gets those checkpointed FPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- * u64 fpr[32];
- * u64 fpscr;
- *};
- */
-static int tm_cfpr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- u64 buf[33];
- int i;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- /* copy to local buffer then write that out */
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_CKFPR(i);
- buf[32] = target->thread.ckfp_state.fpscr;
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-}
-
-/**
- * tm_cfpr_set - set CFPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy into.
- * @ubuf: User buffer to copy from.
- *
- * This function sets in transaction checkpointed FPR registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * FPR register values for the current transaction to fall back on
- * if it aborts in between. This function sets these checkpointed
- * FPR registers. The userspace interface buffer layout is as follows.
- *
- * struct data {
- * u64 fpr[32];
- * u64 fpscr;
- *};
- */
-static int tm_cfpr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- u64 buf[33];
- int i;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- for (i = 0; i < 32; i++)
- buf[i] = target->thread.TS_CKFPR(i);
- buf[32] = target->thread.ckfp_state.fpscr;
-
- /* copy to local buffer then write that out */
- i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
- if (i)
- return i;
- for (i = 0; i < 32 ; i++)
- target->thread.TS_CKFPR(i) = buf[i];
- target->thread.ckfp_state.fpscr = buf[32];
- return 0;
-}
-
-/**
- * tm_cvmx_active - get active number of registers in CVMX
- * @target: The target task.
- * @regset: The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in checkpointed VMX category.
- */
-static int tm_cvmx_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return 0;
-
- return regset->n;
-}
-
-/**
- * tm_cvmx_get - get CMVX registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy from.
- * @ubuf: User buffer to copy into.
- *
- * This function gets in transaction checkpointed VMX registers.
- *
- * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
- * the checkpointed values for the current transaction to fall
- * back on if it aborts in between. The userspace interface buffer
- * layout is as follows.
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- *};
- */
-static int tm_cvmx_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- /* Flush the state */
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckvr_state, 0,
- 33 * sizeof(vector128));
- if (!ret) {
- /*
- * Copy out only the low-order word of vrsave.
- */
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
- vrsave.word = target->thread.ckvrsave;
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
- 33 * sizeof(vector128), -1);
- }
-
- return ret;
-}
-
-/**
- * tm_cvmx_set - set CMVX registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy into.
- * @ubuf: User buffer to copy from.
- *
- * This function sets in transaction checkpointed VMX registers.
- *
- * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
- * the checkpointed values for the current transaction to fall
- * back on if it aborts in between. The userspace interface buffer
- * layout is as follows.
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- *};
- */
-static int tm_cvmx_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- BUILD_BUG_ON(TVSO(vscr) != TVSO(vr[32]));
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.ckvr_state, 0,
- 33 * sizeof(vector128));
- if (!ret && count > 0) {
- /*
- * We use only the low-order word of vrsave.
- */
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
- vrsave.word = target->thread.ckvrsave;
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
- 33 * sizeof(vector128), -1);
- if (!ret)
- target->thread.ckvrsave = vrsave.word;
- }
-
- return ret;
-}
-
-/**
- * tm_cvsx_active - get active number of registers in CVSX
- * @target: The target task.
- * @regset: The user regset structure.
- *
- * This function checks for the active number of available
- * regisers in transaction checkpointed VSX category.
- */
-static int tm_cvsx_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return 0;
-
- flush_vsx_to_thread(target);
- return target->thread.used_vsr ? regset->n : 0;
-}
-
-/**
- * tm_cvsx_get - get CVSX registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy from.
- * @ubuf: User buffer to copy into.
- *
- * This function gets in transaction checkpointed VSX registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * values for the current transaction to fall back on if it aborts
- * in between. This function gets those checkpointed VSX registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct data {
- * u64 vsx[32];
- *};
- */
-static int tm_cvsx_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- u64 buf[32];
- int ret, i;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- /* Flush the state */
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
- flush_vsx_to_thread(target);
-
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- buf, 0, 32 * sizeof(double));
-
- return ret;
-}
-
-/**
- * tm_cvsx_set - set CFPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy into.
- * @ubuf: User buffer to copy from.
- *
- * This function sets in transaction checkpointed VSX registers.
- *
- * When the transaction is active 'ckfp_state' holds the checkpointed
- * VSX register values for the current transaction to fall back on
- * if it aborts in between. This function sets these checkpointed
- * FPR registers. The userspace interface buffer layout is as follows.
- *
- * struct data {
- * u64 vsx[32];
- *};
- */
-static int tm_cvsx_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- u64 buf[32];
- int ret, i;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- /* Flush the state */
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
- flush_vsx_to_thread(target);
-
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- buf, 0, 32 * sizeof(double));
- if (!ret)
- for (i = 0; i < 32 ; i++)
- target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-
- return ret;
-}
-
-/**
- * tm_spr_active - get active number of registers in TM SPR
- * @target: The target task.
- * @regset: The user regset structure.
- *
- * This function checks the active number of available
- * regisers in the transactional memory SPR category.
- */
-static int tm_spr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- return regset->n;
-}
-
-/**
- * tm_spr_get - get the TM related SPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy from.
- * @ubuf: User buffer to copy into.
- *
- * This function gets transactional memory related SPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct {
- * u64 tm_tfhar;
- * u64 tm_texasr;
- * u64 tm_tfiar;
- * };
- */
-static int tm_spr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- /* Build tests */
- BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
- BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
- BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- /* Flush the states */
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- /* TFHAR register */
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tfhar, 0, sizeof(u64));
-
- /* TEXASR register */
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_texasr, sizeof(u64),
- 2 * sizeof(u64));
-
- /* TFIAR register */
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tfiar,
- 2 * sizeof(u64), 3 * sizeof(u64));
- return ret;
-}
-
-/**
- * tm_spr_set - set the TM related SPR registers
- * @target: The target task.
- * @regset: The user regset structure.
- * @pos: The buffer position.
- * @count: Number of bytes to copy.
- * @kbuf: Kernel buffer to copy into.
- * @ubuf: User buffer to copy from.
- *
- * This function sets transactional memory related SPR registers.
- * The userspace interface buffer layout is as follows.
- *
- * struct {
- * u64 tm_tfhar;
- * u64 tm_texasr;
- * u64 tm_tfiar;
- * };
- */
-static int tm_spr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- /* Build tests */
- BUILD_BUG_ON(TSO(tm_tfhar) + sizeof(u64) != TSO(tm_texasr));
- BUILD_BUG_ON(TSO(tm_texasr) + sizeof(u64) != TSO(tm_tfiar));
- BUILD_BUG_ON(TSO(tm_tfiar) + sizeof(u64) != TSO(ckpt_regs));
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- /* Flush the states */
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
-
- /* TFHAR register */
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tfhar, 0, sizeof(u64));
-
- /* TEXASR register */
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_texasr, sizeof(u64),
- 2 * sizeof(u64));
-
- /* TFIAR register */
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tfiar,
- 2 * sizeof(u64), 3 * sizeof(u64));
- return ret;
-}
-
-static int tm_tar_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- return regset->n;
-
- return 0;
-}
-
-static int tm_tar_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tar, 0, sizeof(u64));
- return ret;
-}
-
-static int tm_tar_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_tar, 0, sizeof(u64));
- return ret;
-}
-
-static int tm_ppr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- return regset->n;
-
- return 0;
-}
-
-
-static int tm_ppr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_ppr, 0, sizeof(u64));
- return ret;
-}
-
-static int tm_ppr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_ppr, 0, sizeof(u64));
- return ret;
-}
-
-static int tm_dscr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (MSR_TM_ACTIVE(target->thread.regs->msr))
- return regset->n;
-
- return 0;
-}
-
-static int tm_dscr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_dscr, 0, sizeof(u64));
- return ret;
-}
-
-static int tm_dscr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_TM))
- return -ENODEV;
-
- if (!MSR_TM_ACTIVE(target->thread.regs->msr))
- return -ENODATA;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tm_dscr, 0, sizeof(u64));
- return ret;
-}
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-
#ifdef CONFIG_PPC64
static int ppr_get(struct task_struct *target,
const struct user_regset *regset,
@@ -1641,7 +750,7 @@ static const struct user_regset_view user_ppc_native_view = {
#include <linux/compat.h>
-static int gpr32_get_common(struct task_struct *target,
+int gpr32_get_common(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf,
@@ -1688,7 +797,7 @@ static int gpr32_get_common(struct task_struct *target,
PT_REGS_COUNT * sizeof(reg), -1);
}
-static int gpr32_set_common(struct task_struct *target,
+int gpr32_set_common(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf,
@@ -1756,26 +865,6 @@ static int gpr32_set_common(struct task_struct *target,
(PT_TRAP + 1) * sizeof(reg), -1);
}
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static int tm_cgpr32_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
- &target->thread.ckpt_regs.gpr[0]);
-}
-
-static int tm_cgpr32_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
- &target->thread.ckpt_regs.gpr[0]);
-}
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-
static int gpr32_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 05/12] powerpc/ptrace: split out ALTIVEC related functions.
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Move CONFIG_ALTIVEC functions out of ptrace.c, into
ptrace-altivec.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 1 +
arch/powerpc/kernel/ptrace/ptrace-altivec.c | 151 ++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 9 ++
arch/powerpc/kernel/ptrace/ptrace.c | 124 -----------------------
4 files changed, 161 insertions(+), 124 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-altivec.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 238c27189078..522e6fd0b5b8 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_VSX) += ptrace-vsx.o
ifneq ($(CONFIG_VSX),y)
obj-y += ptrace-novsx.o
endif
+obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
diff --git a/arch/powerpc/kernel/ptrace/ptrace-altivec.c b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
new file mode 100644
index 000000000000..0cb749164269
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-altivec.c
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword. Quadwords 0-31 contain the
+ * corresponding vector registers. Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword. Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface. This allows signal handling and ptrace to use the
+ * same structures. This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ flush_altivec_to_thread(target);
+ return target->thread.used_vr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ flush_altivec_to_thread(target);
+
+ BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+ offsetof(struct thread_vr_state, vr[32]));
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.vr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret) {
+ /*
+ * Copy out only the low-order word of vrsave.
+ */
+ int start, end;
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+
+ vrsave.word = target->thread.vrsave;
+
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
+ start, end);
+ }
+
+ return ret;
+}
+
+/*
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * vector128 vr[32];
+ * vector128 vscr;
+ * vector128 vrsave;
+ * };
+ */
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ flush_altivec_to_thread(target);
+
+ BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
+ offsetof(struct thread_vr_state, vr[32]));
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.vr_state, 0,
+ 33 * sizeof(vector128));
+ if (!ret && count > 0) {
+ /*
+ * We use only the first word of vrsave.
+ */
+ int start, end;
+ union {
+ elf_vrreg_t reg;
+ u32 word;
+ } vrsave;
+ memset(&vrsave, 0, sizeof(vrsave));
+
+ vrsave.word = target->thread.vrsave;
+
+ start = 33 * sizeof(vector128);
+ end = start + sizeof(vrsave);
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
+ start, end);
+ if (!ret)
+ target->thread.vrsave = vrsave.word;
+ }
+
+ return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 764df4ee9362..0f9282cb52fc 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -17,6 +17,15 @@ int vsr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf);
+/* ptrace-altivec */
+
+int vr_active(struct task_struct *target, const struct user_regset *regset);
+int vr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+
/* ptrace */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 3d0a0b8f8c07..198ccbfce544 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -415,130 +415,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}
-#ifdef CONFIG_ALTIVEC
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword. Quadwords 0-31 contain the
- * corresponding vector registers. Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword. Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface. This allows signal handling and ptrace to use the
- * same structures. This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-
-static int vr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- flush_altivec_to_thread(target);
- return target->thread.used_vr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- * };
- */
-static int vr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- flush_altivec_to_thread(target);
-
- BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
- offsetof(struct thread_vr_state, vr[32]));
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
- 33 * sizeof(vector128));
- if (!ret) {
- /*
- * Copy out only the low-order word of vrsave.
- */
- int start, end;
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
-
- vrsave.word = target->thread.vrsave;
-
- start = 33 * sizeof(vector128);
- end = start + sizeof(vrsave);
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
- start, end);
- }
-
- return ret;
-}
-
-/*
- * Regardless of transactions, 'vr_state' holds the current running
- * value of all the VMX registers and 'ckvr_state' holds the last
- * checkpointed value of all the VMX registers for the current
- * transaction to fall back on in case it aborts.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * vector128 vr[32];
- * vector128 vscr;
- * vector128 vrsave;
- * };
- */
-static int vr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- flush_altivec_to_thread(target);
-
- BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
- offsetof(struct thread_vr_state, vr[32]));
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.vr_state, 0,
- 33 * sizeof(vector128));
- if (!ret && count > 0) {
- /*
- * We use only the first word of vrsave.
- */
- int start, end;
- union {
- elf_vrreg_t reg;
- u32 word;
- } vrsave;
- memset(&vrsave, 0, sizeof(vrsave));
-
- vrsave.word = target->thread.vrsave;
-
- start = 33 * sizeof(vector128);
- end = start + sizeof(vrsave);
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
- start, end);
- if (!ret)
- target->thread.vrsave = vrsave.word;
- }
-
- return ret;
-}
-#endif /* CONFIG_ALTIVEC */
-
#ifdef CONFIG_SPE
/*
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 10/12] powerpc/ptrace: create ptrace_get_debugreg()
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Create ptrace_get_debugreg() to handle PTRACE_GET_DEBUGREG and
reduce ifdef mess
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/ptrace-adv.c | 9 +++++++++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 2 ++
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 13 +++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 18 ++----------------
4 files changed, 26 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/kernel/ptrace/ptrace-adv.c b/arch/powerpc/kernel/ptrace/ptrace-adv.c
index 86e71fa6c5c8..dcc765940344 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-adv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-adv.c
@@ -83,6 +83,15 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+ unsigned long __user *datalp)
+{
+ /* We only support one DABR and no IABRS at the moment */
+ if (addr > 0)
+ return -EINVAL;
+ return put_user(child->thread.debug.dac1, datalp);
+}
+
int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
{
/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index bdba09a87aea..4b4b6a1d508a 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -176,6 +176,8 @@ int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
extern const struct user_regset_view user_ppc_native_view;
/* ptrace-(no)adv */
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+ unsigned long __user *datalp);
int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data);
long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_info);
long ppc_del_hwdebug(struct task_struct *child, long data);
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 7db330c94538..985cca136f85 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -64,6 +64,19 @@ void user_disable_single_step(struct task_struct *task)
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
+ unsigned long __user *datalp)
+{
+ unsigned long dabr_fake;
+
+ /* We only support one DABR and no IABRS at the moment */
+ if (addr > 0)
+ return -EINVAL;
+ dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
+ (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
+ return put_user(dabr_fake, datalp);
+}
+
int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data)
{
#ifdef CONFIG_HAVE_HW_BREAKPOINT
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 377e0e541d5f..e789afae6f56 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -211,23 +211,9 @@ long arch_ptrace(struct task_struct *child, long request,
break;
}
- case PTRACE_GET_DEBUGREG: {
-#ifndef CONFIG_PPC_ADV_DEBUG_REGS
- unsigned long dabr_fake;
-#endif
- ret = -EINVAL;
- /* We only support one DABR and no IABRS at the moment */
- if (addr > 0)
- break;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
- ret = put_user(child->thread.debug.dac1, datalp);
-#else
- dabr_fake = ((child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |
- (child->thread.hw_brk.type & HW_BRK_TYPE_DABR));
- ret = put_user(dabr_fake, datalp);
-#endif
+ case PTRACE_GET_DEBUGREG:
+ ret = ptrace_get_debugreg(child, addr, datalp);
break;
- }
case PTRACE_SET_DEBUGREG:
ret = ptrace_set_debugreg(child, addr, data);
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 06/12] powerpc/ptrace: split out SPE related functions.
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Move CONFIG_SPE functions out of ptrace.c, into
ptrace-spe.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 1 +
arch/powerpc/kernel/ptrace/ptrace-decl.h | 9 ++++
arch/powerpc/kernel/ptrace/ptrace-spe.c | 92 ++++++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 66 -----------------------
4 files changed, 102 insertions(+), 66 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-spe.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 522e6fd0b5b8..f87eadf6e072 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -12,3 +12,4 @@ ifneq ($(CONFIG_VSX),y)
obj-y += ptrace-novsx.o
endif
obj-$(CONFIG_ALTIVEC) += ptrace-altivec.o
+obj-$(CONFIG_SPE) += ptrace-spe.o
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 0f9282cb52fc..8a362f97f1d6 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -26,6 +26,15 @@ int vr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf);
+/* ptrace-spe */
+
+int evr_active(struct task_struct *target, const struct user_regset *regset);
+int evr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int evr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+
/* ptrace */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
diff --git a/arch/powerpc/kernel/ptrace/ptrace-spe.c b/arch/powerpc/kernel/ptrace/ptrace-spe.c
new file mode 100644
index 000000000000..b286fdf20feb
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-spe.c
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * For get_evrregs/set_evrregs functions 'data' has the following layout:
+ *
+ * struct {
+ * u32 evr[32];
+ * u64 acc;
+ * u32 spefscr;
+ * }
+ */
+
+int evr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ flush_spe_to_thread(target);
+ return target->thread.used_spe ? regset->n : 0;
+}
+
+int evr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ flush_spe_to_thread(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.evr,
+ 0, sizeof(target->thread.evr));
+
+ BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
+ offsetof(struct thread_struct, spefscr));
+
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.acc,
+ sizeof(target->thread.evr), -1);
+
+ return ret;
+}
+
+int evr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ flush_spe_to_thread(target);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.evr,
+ 0, sizeof(target->thread.evr));
+
+ BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
+ offsetof(struct thread_struct, spefscr));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.acc,
+ sizeof(target->thread.evr), -1);
+
+ return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 198ccbfce544..711cccdc14e4 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -415,72 +415,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}
-#ifdef CONFIG_SPE
-
-/*
- * For get_evrregs/set_evrregs functions 'data' has the following layout:
- *
- * struct {
- * u32 evr[32];
- * u64 acc;
- * u32 spefscr;
- * }
- */
-
-static int evr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- flush_spe_to_thread(target);
- return target->thread.used_spe ? regset->n : 0;
-}
-
-static int evr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int ret;
-
- flush_spe_to_thread(target);
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.evr,
- 0, sizeof(target->thread.evr));
-
- BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
- offsetof(struct thread_struct, spefscr));
-
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.acc,
- sizeof(target->thread.evr), -1);
-
- return ret;
-}
-
-static int evr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret;
-
- flush_spe_to_thread(target);
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.evr,
- 0, sizeof(target->thread.evr));
-
- BUILD_BUG_ON(offsetof(struct thread_struct, acc) + sizeof(u64) !=
- offsetof(struct thread_struct, spefscr));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.acc,
- sizeof(target->thread.evr), -1);
-
- return ret;
-}
-#endif /* CONFIG_SPE */
-
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/**
* tm_cgpr_active - get active number of registers in CGPR
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 08/12] powerpc/ptrace: move register viewing functions out of ptrace.c
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Create a dedicated ptrace-view.c file.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 4 +-
arch/powerpc/kernel/ptrace/ptrace-decl.h | 43 ++
arch/powerpc/kernel/ptrace/ptrace-view.c | 953 ++++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 960 -------------------------------
4 files changed, 998 insertions(+), 962 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-view.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 2d7f5f301536..7addc5994bb9 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -3,9 +3,9 @@
# Makefile for the linux kernel.
#
-CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
+CFLAGS_ptrace-view.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
-obj-y += ptrace.o
+obj-y += ptrace.o ptrace-view.o
obj-$(CONFIG_PPC64) += ptrace32.o
obj-$(CONFIG_VSX) += ptrace-vsx.o
ifneq ($(CONFIG_VSX),y)
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
index 8d076818f1de..e12f6615fc1d 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-decl.h
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -22,6 +22,45 @@
#define TFSO(f) (offsetof(struct thread_fp_state, f))
#define TSO(f) (offsetof(struct thread_struct, f))
+/*
+ * These are our native regset flavors.
+ */
+enum powerpc_regset {
+ REGSET_GPR,
+ REGSET_FPR,
+#ifdef CONFIG_ALTIVEC
+ REGSET_VMX,
+#endif
+#ifdef CONFIG_VSX
+ REGSET_VSX,
+#endif
+#ifdef CONFIG_SPE
+ REGSET_SPE,
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ REGSET_TM_CGPR, /* TM checkpointed GPR registers */
+ REGSET_TM_CFPR, /* TM checkpointed FPR registers */
+ REGSET_TM_CVMX, /* TM checkpointed VMX registers */
+ REGSET_TM_CVSX, /* TM checkpointed VSX registers */
+ REGSET_TM_SPR, /* TM specific SPR registers */
+ REGSET_TM_CTAR, /* TM checkpointed TAR register */
+ REGSET_TM_CPPR, /* TM checkpointed PPR register */
+ REGSET_TM_CDSCR, /* TM checkpointed DSCR register */
+#endif
+#ifdef CONFIG_PPC64
+ REGSET_PPR, /* PPR register */
+ REGSET_DSCR, /* DSCR register */
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+ REGSET_TAR, /* TAR register */
+ REGSET_EBB, /* EBB registers */
+ REGSET_PMR, /* Performance Monitor Registers */
+#endif
+#ifdef CONFIG_PPC_MEM_KEYS
+ REGSET_PKEY, /* AMR register */
+#endif
+};
+
/* ptrace-(no)vsx */
int fpr_get(struct task_struct *target, const struct user_regset *regset,
@@ -131,3 +170,7 @@ int tm_cgpr32_get(struct task_struct *target, const struct user_regset *regset,
int tm_cgpr32_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf);
+
+/* ptrace-view */
+
+extern const struct user_regset_view user_ppc_native_view;
diff --git a/arch/powerpc/kernel/ptrace/ptrace-view.c b/arch/powerpc/kernel/ptrace/ptrace-view.c
new file mode 100644
index 000000000000..d24050e503da
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-view.c
@@ -0,0 +1,953 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+struct pt_regs_offset {
+ const char *name;
+ int offset;
+};
+
+#define STR(s) #s /* convert to string */
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define GPR_OFFSET_NAME(num) \
+ {.name = STR(r##num), .offset = offsetof(struct pt_regs, gpr[num])}, \
+ {.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+ GPR_OFFSET_NAME(0),
+ GPR_OFFSET_NAME(1),
+ GPR_OFFSET_NAME(2),
+ GPR_OFFSET_NAME(3),
+ GPR_OFFSET_NAME(4),
+ GPR_OFFSET_NAME(5),
+ GPR_OFFSET_NAME(6),
+ GPR_OFFSET_NAME(7),
+ GPR_OFFSET_NAME(8),
+ GPR_OFFSET_NAME(9),
+ GPR_OFFSET_NAME(10),
+ GPR_OFFSET_NAME(11),
+ GPR_OFFSET_NAME(12),
+ GPR_OFFSET_NAME(13),
+ GPR_OFFSET_NAME(14),
+ GPR_OFFSET_NAME(15),
+ GPR_OFFSET_NAME(16),
+ GPR_OFFSET_NAME(17),
+ GPR_OFFSET_NAME(18),
+ GPR_OFFSET_NAME(19),
+ GPR_OFFSET_NAME(20),
+ GPR_OFFSET_NAME(21),
+ GPR_OFFSET_NAME(22),
+ GPR_OFFSET_NAME(23),
+ GPR_OFFSET_NAME(24),
+ GPR_OFFSET_NAME(25),
+ GPR_OFFSET_NAME(26),
+ GPR_OFFSET_NAME(27),
+ GPR_OFFSET_NAME(28),
+ GPR_OFFSET_NAME(29),
+ GPR_OFFSET_NAME(30),
+ GPR_OFFSET_NAME(31),
+ REG_OFFSET_NAME(nip),
+ REG_OFFSET_NAME(msr),
+ REG_OFFSET_NAME(ctr),
+ REG_OFFSET_NAME(link),
+ REG_OFFSET_NAME(xer),
+ REG_OFFSET_NAME(ccr),
+ REG_OFFSET_NAME(softe),
+ REG_OFFSET_NAME(mq),
+ REG_OFFSET_NAME(trap),
+ REG_OFFSET_NAME(dar),
+ REG_OFFSET_NAME(dsisr),
+ REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name: the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+ const struct pt_regs_offset *roff;
+ for (roff = regoffset_table; roff->name != NULL; roff++)
+ if (!strcmp(roff->name, name))
+ return roff->offset;
+ return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset: the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+ const struct pt_regs_offset *roff;
+ for (roff = regoffset_table; roff->name != NULL; roff++)
+ if (roff->offset == offset)
+ return roff->name;
+ return NULL;
+}
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+static unsigned long get_user_msr(struct task_struct *task)
+{
+ return task->thread.regs->msr | task->thread.fpexc_mode;
+}
+
+static int set_user_msr(struct task_struct *task, unsigned long msr)
+{
+ task->thread.regs->msr &= ~MSR_DEBUGCHANGE;
+ task->thread.regs->msr |= msr & MSR_DEBUGCHANGE;
+ return 0;
+}
+
+#ifdef CONFIG_PPC64
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
+{
+ *data = task->thread.dscr;
+ return 0;
+}
+
+static int set_user_dscr(struct task_struct *task, unsigned long dscr)
+{
+ task->thread.dscr = dscr;
+ task->thread.dscr_inherit = 1;
+ return 0;
+}
+#else
+static int get_user_dscr(struct task_struct *task, unsigned long *data)
+{
+ return -EIO;
+}
+
+static int set_user_dscr(struct task_struct *task, unsigned long dscr)
+{
+ return -EIO;
+}
+#endif
+
+/*
+ * We prevent mucking around with the reserved area of trap
+ * which are used internally by the kernel.
+ */
+static int set_user_trap(struct task_struct *task, unsigned long trap)
+{
+ task->thread.regs->trap = trap & 0xfff0;
+ return 0;
+}
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
+{
+ unsigned int regs_max;
+
+ if ((task->thread.regs == NULL) || !data)
+ return -EIO;
+
+ if (regno == PT_MSR) {
+ *data = get_user_msr(task);
+ return 0;
+ }
+
+ if (regno == PT_DSCR)
+ return get_user_dscr(task, data);
+
+ /*
+ * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
+ * no more used as a flag, lets force usr to alway see the softe value as 1
+ * which means interrupts are not soft disabled.
+ */
+ if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
+ *data = 1;
+ return 0;
+ }
+
+ regs_max = sizeof(struct user_pt_regs) / sizeof(unsigned long);
+ if (regno < regs_max) {
+ regno = array_index_nospec(regno, regs_max);
+ *data = ((unsigned long *)task->thread.regs)[regno];
+ return 0;
+ }
+
+ return -EIO;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+ if (task->thread.regs == NULL)
+ return -EIO;
+
+ if (regno == PT_MSR)
+ return set_user_msr(task, data);
+ if (regno == PT_TRAP)
+ return set_user_trap(task, data);
+ if (regno == PT_DSCR)
+ return set_user_dscr(task, data);
+
+ if (regno <= PT_MAX_PUT_REG) {
+ regno = array_index_nospec(regno, PT_MAX_PUT_REG + 1);
+ ((unsigned long *)task->thread.regs)[regno] = data;
+ return 0;
+ }
+ return -EIO;
+}
+
+static int gpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int i, ret;
+
+ if (target->thread.regs == NULL)
+ return -EIO;
+
+ if (!FULL_REGS(target->thread.regs)) {
+ /* We have a partial register set. Fill 14-31 with bogus values */
+ for (i = 14; i < 32; i++)
+ target->thread.regs->gpr[i] = NV_REG_POISON;
+ }
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ target->thread.regs,
+ 0, offsetof(struct pt_regs, msr));
+ if (!ret) {
+ unsigned long msr = get_user_msr(target);
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
+ offsetof(struct pt_regs, msr),
+ offsetof(struct pt_regs, msr) +
+ sizeof(msr));
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.regs->orig_gpr3,
+ offsetof(struct pt_regs, orig_gpr3),
+ sizeof(struct user_pt_regs));
+ if (!ret)
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ sizeof(struct user_pt_regs), -1);
+
+ return ret;
+}
+
+static int gpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ unsigned long reg;
+ int ret;
+
+ if (target->thread.regs == NULL)
+ return -EIO;
+
+ CHECK_FULL_REGS(target->thread.regs);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ target->thread.regs,
+ 0, PT_MSR * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_MSR * sizeof(reg),
+ (PT_MSR + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_msr(target, reg);
+ }
+
+ BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
+ offsetof(struct pt_regs, msr) + sizeof(long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.regs->orig_gpr3,
+ PT_ORIG_R3 * sizeof(reg),
+ (PT_MAX_PUT_REG + 1) * sizeof(reg));
+
+ if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_MAX_PUT_REG + 1) * sizeof(reg),
+ PT_TRAP * sizeof(reg));
+
+ if (!ret && count > 0) {
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
+ PT_TRAP * sizeof(reg),
+ (PT_TRAP + 1) * sizeof(reg));
+ if (!ret)
+ ret = set_user_trap(target, reg);
+ }
+
+ if (!ret)
+ ret = user_regset_copyin_ignore(
+ &pos, &count, &kbuf, &ubuf,
+ (PT_TRAP + 1) * sizeof(reg), -1);
+
+ return ret;
+}
+
+#ifdef CONFIG_PPC64
+static int ppr_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.regs->ppr, 0, sizeof(u64));
+}
+
+static int ppr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.regs->ppr, 0, sizeof(u64));
+}
+
+static int dscr_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.dscr, 0, sizeof(u64));
+}
+static int dscr_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.dscr, 0, sizeof(u64));
+}
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+static int tar_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tar, 0, sizeof(u64));
+}
+static int tar_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.tar, 0, sizeof(u64));
+}
+
+static int ebb_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ if (target->thread.used_ebb)
+ return regset->n;
+
+ return 0;
+}
+
+static int ebb_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ /* Build tests */
+ BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
+ BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
+
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ if (!target->thread.used_ebb)
+ return -ENODATA;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ebbrr, 0, 3 * sizeof(unsigned long));
+}
+
+static int ebb_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret = 0;
+
+ /* Build tests */
+ BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
+ BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
+
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ if (target->thread.used_ebb)
+ return -ENODATA;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ebbrr, 0, sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.ebbhr, sizeof(unsigned long),
+ 2 * sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.bescr,
+ 2 * sizeof(unsigned long), 3 * sizeof(unsigned long));
+
+ return ret;
+}
+static int pmu_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ return regset->n;
+}
+
+static int pmu_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ /* Build tests */
+ BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
+ BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
+ BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
+ BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
+
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.siar, 0,
+ 5 * sizeof(unsigned long));
+}
+
+static int pmu_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret = 0;
+
+ /* Build tests */
+ BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
+ BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
+ BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
+ BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
+
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ return -ENODEV;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.siar, 0,
+ sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.sdar, sizeof(unsigned long),
+ 2 * sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.sier, 2 * sizeof(unsigned long),
+ 3 * sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.mmcr2, 3 * sizeof(unsigned long),
+ 4 * sizeof(unsigned long));
+
+ if (!ret)
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.mmcr0, 4 * sizeof(unsigned long),
+ 5 * sizeof(unsigned long));
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_PPC_MEM_KEYS
+static int pkey_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ if (!arch_pkeys_enabled())
+ return -ENODEV;
+
+ return regset->n;
+}
+
+static int pkey_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ BUILD_BUG_ON(TSO(amr) + sizeof(unsigned long) != TSO(iamr));
+ BUILD_BUG_ON(TSO(iamr) + sizeof(unsigned long) != TSO(uamor));
+
+ if (!arch_pkeys_enabled())
+ return -ENODEV;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.amr, 0,
+ ELF_NPKEY * sizeof(unsigned long));
+}
+
+static int pkey_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ u64 new_amr;
+ int ret;
+
+ if (!arch_pkeys_enabled())
+ return -ENODEV;
+
+ /* Only the AMR can be set from userspace */
+ if (pos != 0 || count != sizeof(new_amr))
+ return -EINVAL;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &new_amr, 0, sizeof(new_amr));
+ if (ret)
+ return ret;
+
+ /* UAMOR determines which bits of the AMR can be set from userspace. */
+ target->thread.amr = (new_amr & target->thread.uamor) |
+ (target->thread.amr & ~target->thread.uamor);
+
+ return 0;
+}
+#endif /* CONFIG_PPC_MEM_KEYS */
+
+static const struct user_regset native_regsets[] = {
+ [REGSET_GPR] = {
+ .core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+ .size = sizeof(long), .align = sizeof(long),
+ .get = gpr_get, .set = gpr_set
+ },
+ [REGSET_FPR] = {
+ .core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+ .size = sizeof(double), .align = sizeof(double),
+ .get = fpr_get, .set = fpr_set
+ },
+#ifdef CONFIG_ALTIVEC
+ [REGSET_VMX] = {
+ .core_note_type = NT_PPC_VMX, .n = 34,
+ .size = sizeof(vector128), .align = sizeof(vector128),
+ .active = vr_active, .get = vr_get, .set = vr_set
+ },
+#endif
+#ifdef CONFIG_VSX
+ [REGSET_VSX] = {
+ .core_note_type = NT_PPC_VSX, .n = 32,
+ .size = sizeof(double), .align = sizeof(double),
+ .active = vsr_active, .get = vsr_get, .set = vsr_set
+ },
+#endif
+#ifdef CONFIG_SPE
+ [REGSET_SPE] = {
+ .core_note_type = NT_PPC_SPE, .n = 35,
+ .size = sizeof(u32), .align = sizeof(u32),
+ .active = evr_active, .get = evr_get, .set = evr_set
+ },
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ [REGSET_TM_CGPR] = {
+ .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+ .size = sizeof(long), .align = sizeof(long),
+ .active = tm_cgpr_active, .get = tm_cgpr_get, .set = tm_cgpr_set
+ },
+ [REGSET_TM_CFPR] = {
+ .core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
+ .size = sizeof(double), .align = sizeof(double),
+ .active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
+ },
+ [REGSET_TM_CVMX] = {
+ .core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
+ .size = sizeof(vector128), .align = sizeof(vector128),
+ .active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
+ },
+ [REGSET_TM_CVSX] = {
+ .core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
+ .size = sizeof(double), .align = sizeof(double),
+ .active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
+ },
+ [REGSET_TM_SPR] = {
+ .core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
+ },
+ [REGSET_TM_CTAR] = {
+ .core_note_type = NT_PPC_TM_CTAR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
+ },
+ [REGSET_TM_CPPR] = {
+ .core_note_type = NT_PPC_TM_CPPR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
+ },
+ [REGSET_TM_CDSCR] = {
+ .core_note_type = NT_PPC_TM_CDSCR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
+ },
+#endif
+#ifdef CONFIG_PPC64
+ [REGSET_PPR] = {
+ .core_note_type = NT_PPC_PPR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = ppr_get, .set = ppr_set
+ },
+ [REGSET_DSCR] = {
+ .core_note_type = NT_PPC_DSCR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = dscr_get, .set = dscr_set
+ },
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+ [REGSET_TAR] = {
+ .core_note_type = NT_PPC_TAR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = tar_get, .set = tar_set
+ },
+ [REGSET_EBB] = {
+ .core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = ebb_active, .get = ebb_get, .set = ebb_set
+ },
+ [REGSET_PMR] = {
+ .core_note_type = NT_PPC_PMU, .n = ELF_NPMU,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = pmu_active, .get = pmu_get, .set = pmu_set
+ },
+#endif
+#ifdef CONFIG_PPC_MEM_KEYS
+ [REGSET_PKEY] = {
+ .core_note_type = NT_PPC_PKEY, .n = ELF_NPKEY,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = pkey_active, .get = pkey_get, .set = pkey_set
+ },
+#endif
+};
+
+const struct user_regset_view user_ppc_native_view = {
+ .name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
+ .regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
+};
+
+#include <linux/compat.h>
+
+int gpr32_get_common(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf,
+ unsigned long *regs)
+{
+ compat_ulong_t *k = kbuf;
+ compat_ulong_t __user *u = ubuf;
+ compat_ulong_t reg;
+
+ pos /= sizeof(reg);
+ count /= sizeof(reg);
+
+ if (kbuf)
+ for (; count > 0 && pos < PT_MSR; --count)
+ *k++ = regs[pos++];
+ else
+ for (; count > 0 && pos < PT_MSR; --count)
+ if (__put_user((compat_ulong_t) regs[pos++], u++))
+ return -EFAULT;
+
+ if (count > 0 && pos == PT_MSR) {
+ reg = get_user_msr(target);
+ if (kbuf)
+ *k++ = reg;
+ else if (__put_user(reg, u++))
+ return -EFAULT;
+ ++pos;
+ --count;
+ }
+
+ if (kbuf)
+ for (; count > 0 && pos < PT_REGS_COUNT; --count)
+ *k++ = regs[pos++];
+ else
+ for (; count > 0 && pos < PT_REGS_COUNT; --count)
+ if (__put_user((compat_ulong_t) regs[pos++], u++))
+ return -EFAULT;
+
+ kbuf = k;
+ ubuf = u;
+ pos *= sizeof(reg);
+ count *= sizeof(reg);
+ return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ PT_REGS_COUNT * sizeof(reg), -1);
+}
+
+int gpr32_set_common(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf,
+ unsigned long *regs)
+{
+ const compat_ulong_t *k = kbuf;
+ const compat_ulong_t __user *u = ubuf;
+ compat_ulong_t reg;
+
+ pos /= sizeof(reg);
+ count /= sizeof(reg);
+
+ if (kbuf)
+ for (; count > 0 && pos < PT_MSR; --count)
+ regs[pos++] = *k++;
+ else
+ for (; count > 0 && pos < PT_MSR; --count) {
+ if (__get_user(reg, u++))
+ return -EFAULT;
+ regs[pos++] = reg;
+ }
+
+
+ if (count > 0 && pos == PT_MSR) {
+ if (kbuf)
+ reg = *k++;
+ else if (__get_user(reg, u++))
+ return -EFAULT;
+ set_user_msr(target, reg);
+ ++pos;
+ --count;
+ }
+
+ if (kbuf) {
+ for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
+ regs[pos++] = *k++;
+ for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+ ++k;
+ } else {
+ for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
+ if (__get_user(reg, u++))
+ return -EFAULT;
+ regs[pos++] = reg;
+ }
+ for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+ if (__get_user(reg, u++))
+ return -EFAULT;
+ }
+
+ if (count > 0 && pos == PT_TRAP) {
+ if (kbuf)
+ reg = *k++;
+ else if (__get_user(reg, u++))
+ return -EFAULT;
+ set_user_trap(target, reg);
+ ++pos;
+ --count;
+ }
+
+ kbuf = k;
+ ubuf = u;
+ pos *= sizeof(reg);
+ count *= sizeof(reg);
+ return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ (PT_TRAP + 1) * sizeof(reg), -1);
+}
+
+static int gpr32_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int i;
+
+ if (target->thread.regs == NULL)
+ return -EIO;
+
+ if (!FULL_REGS(target->thread.regs)) {
+ /*
+ * We have a partial register set.
+ * Fill 14-31 with bogus values.
+ */
+ for (i = 14; i < 32; i++)
+ target->thread.regs->gpr[i] = NV_REG_POISON;
+ }
+ return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
+ &target->thread.regs->gpr[0]);
+}
+
+static int gpr32_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ if (target->thread.regs == NULL)
+ return -EIO;
+
+ CHECK_FULL_REGS(target->thread.regs);
+ return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
+ &target->thread.regs->gpr[0]);
+}
+
+/*
+ * These are the regset flavors matching the CONFIG_PPC32 native set.
+ */
+static const struct user_regset compat_regsets[] = {
+ [REGSET_GPR] = {
+ .core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+ .size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
+ .get = gpr32_get, .set = gpr32_set
+ },
+ [REGSET_FPR] = {
+ .core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+ .size = sizeof(double), .align = sizeof(double),
+ .get = fpr_get, .set = fpr_set
+ },
+#ifdef CONFIG_ALTIVEC
+ [REGSET_VMX] = {
+ .core_note_type = NT_PPC_VMX, .n = 34,
+ .size = sizeof(vector128), .align = sizeof(vector128),
+ .active = vr_active, .get = vr_get, .set = vr_set
+ },
+#endif
+#ifdef CONFIG_SPE
+ [REGSET_SPE] = {
+ .core_note_type = NT_PPC_SPE, .n = 35,
+ .size = sizeof(u32), .align = sizeof(u32),
+ .active = evr_active, .get = evr_get, .set = evr_set
+ },
+#endif
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ [REGSET_TM_CGPR] = {
+ .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
+ .size = sizeof(long), .align = sizeof(long),
+ .active = tm_cgpr_active,
+ .get = tm_cgpr32_get, .set = tm_cgpr32_set
+ },
+ [REGSET_TM_CFPR] = {
+ .core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
+ .size = sizeof(double), .align = sizeof(double),
+ .active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
+ },
+ [REGSET_TM_CVMX] = {
+ .core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
+ .size = sizeof(vector128), .align = sizeof(vector128),
+ .active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
+ },
+ [REGSET_TM_CVSX] = {
+ .core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
+ .size = sizeof(double), .align = sizeof(double),
+ .active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
+ },
+ [REGSET_TM_SPR] = {
+ .core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
+ },
+ [REGSET_TM_CTAR] = {
+ .core_note_type = NT_PPC_TM_CTAR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
+ },
+ [REGSET_TM_CPPR] = {
+ .core_note_type = NT_PPC_TM_CPPR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
+ },
+ [REGSET_TM_CDSCR] = {
+ .core_note_type = NT_PPC_TM_CDSCR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
+ },
+#endif
+#ifdef CONFIG_PPC64
+ [REGSET_PPR] = {
+ .core_note_type = NT_PPC_PPR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = ppr_get, .set = ppr_set
+ },
+ [REGSET_DSCR] = {
+ .core_note_type = NT_PPC_DSCR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = dscr_get, .set = dscr_set
+ },
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+ [REGSET_TAR] = {
+ .core_note_type = NT_PPC_TAR, .n = 1,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .get = tar_get, .set = tar_set
+ },
+ [REGSET_EBB] = {
+ .core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
+ .size = sizeof(u64), .align = sizeof(u64),
+ .active = ebb_active, .get = ebb_get, .set = ebb_set
+ },
+#endif
+};
+
+static const struct user_regset_view user_ppc_compat_view = {
+ .name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
+ .regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ if (IS_ENABLED(CONFIG_PPC64) && test_tsk_thread_flag(task, TIF_32BIT))
+ return &user_ppc_compat_view;
+ return &user_ppc_native_view;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 9e06e8dc4297..78068f513353 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -50,966 +50,6 @@
#include <kernel/ptrace/ptrace-decl.h>
-struct pt_regs_offset {
- const char *name;
- int offset;
-};
-
-#define STR(s) #s /* convert to string */
-#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
-#define GPR_OFFSET_NAME(num) \
- {.name = STR(r##num), .offset = offsetof(struct pt_regs, gpr[num])}, \
- {.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-static const struct pt_regs_offset regoffset_table[] = {
- GPR_OFFSET_NAME(0),
- GPR_OFFSET_NAME(1),
- GPR_OFFSET_NAME(2),
- GPR_OFFSET_NAME(3),
- GPR_OFFSET_NAME(4),
- GPR_OFFSET_NAME(5),
- GPR_OFFSET_NAME(6),
- GPR_OFFSET_NAME(7),
- GPR_OFFSET_NAME(8),
- GPR_OFFSET_NAME(9),
- GPR_OFFSET_NAME(10),
- GPR_OFFSET_NAME(11),
- GPR_OFFSET_NAME(12),
- GPR_OFFSET_NAME(13),
- GPR_OFFSET_NAME(14),
- GPR_OFFSET_NAME(15),
- GPR_OFFSET_NAME(16),
- GPR_OFFSET_NAME(17),
- GPR_OFFSET_NAME(18),
- GPR_OFFSET_NAME(19),
- GPR_OFFSET_NAME(20),
- GPR_OFFSET_NAME(21),
- GPR_OFFSET_NAME(22),
- GPR_OFFSET_NAME(23),
- GPR_OFFSET_NAME(24),
- GPR_OFFSET_NAME(25),
- GPR_OFFSET_NAME(26),
- GPR_OFFSET_NAME(27),
- GPR_OFFSET_NAME(28),
- GPR_OFFSET_NAME(29),
- GPR_OFFSET_NAME(30),
- GPR_OFFSET_NAME(31),
- REG_OFFSET_NAME(nip),
- REG_OFFSET_NAME(msr),
- REG_OFFSET_NAME(ctr),
- REG_OFFSET_NAME(link),
- REG_OFFSET_NAME(xer),
- REG_OFFSET_NAME(ccr),
- REG_OFFSET_NAME(softe),
- REG_OFFSET_NAME(mq),
- REG_OFFSET_NAME(trap),
- REG_OFFSET_NAME(dar),
- REG_OFFSET_NAME(dsisr),
- REG_OFFSET_END,
-};
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name: the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (!strcmp(roff->name, name))
- return roff->offset;
- return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset: the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
- const struct pt_regs_offset *roff;
- for (roff = regoffset_table; roff->name != NULL; roff++)
- if (roff->offset == offset)
- return roff->name;
- return NULL;
-}
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-static unsigned long get_user_msr(struct task_struct *task)
-{
- return task->thread.regs->msr | task->thread.fpexc_mode;
-}
-
-static int set_user_msr(struct task_struct *task, unsigned long msr)
-{
- task->thread.regs->msr &= ~MSR_DEBUGCHANGE;
- task->thread.regs->msr |= msr & MSR_DEBUGCHANGE;
- return 0;
-}
-
-#ifdef CONFIG_PPC64
-static int get_user_dscr(struct task_struct *task, unsigned long *data)
-{
- *data = task->thread.dscr;
- return 0;
-}
-
-static int set_user_dscr(struct task_struct *task, unsigned long dscr)
-{
- task->thread.dscr = dscr;
- task->thread.dscr_inherit = 1;
- return 0;
-}
-#else
-static int get_user_dscr(struct task_struct *task, unsigned long *data)
-{
- return -EIO;
-}
-
-static int set_user_dscr(struct task_struct *task, unsigned long dscr)
-{
- return -EIO;
-}
-#endif
-
-/*
- * We prevent mucking around with the reserved area of trap
- * which are used internally by the kernel.
- */
-static int set_user_trap(struct task_struct *task, unsigned long trap)
-{
- task->thread.regs->trap = trap & 0xfff0;
- return 0;
-}
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
-{
- unsigned int regs_max;
-
- if ((task->thread.regs == NULL) || !data)
- return -EIO;
-
- if (regno == PT_MSR) {
- *data = get_user_msr(task);
- return 0;
- }
-
- if (regno == PT_DSCR)
- return get_user_dscr(task, data);
-
- /*
- * softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
- * no more used as a flag, lets force usr to alway see the softe value as 1
- * which means interrupts are not soft disabled.
- */
- if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
- *data = 1;
- return 0;
- }
-
- regs_max = sizeof(struct user_pt_regs) / sizeof(unsigned long);
- if (regno < regs_max) {
- regno = array_index_nospec(regno, regs_max);
- *data = ((unsigned long *)task->thread.regs)[regno];
- return 0;
- }
-
- return -EIO;
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-int ptrace_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
- if (task->thread.regs == NULL)
- return -EIO;
-
- if (regno == PT_MSR)
- return set_user_msr(task, data);
- if (regno == PT_TRAP)
- return set_user_trap(task, data);
- if (regno == PT_DSCR)
- return set_user_dscr(task, data);
-
- if (regno <= PT_MAX_PUT_REG) {
- regno = array_index_nospec(regno, PT_MAX_PUT_REG + 1);
- ((unsigned long *)task->thread.regs)[regno] = data;
- return 0;
- }
- return -EIO;
-}
-
-static int gpr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int i, ret;
-
- if (target->thread.regs == NULL)
- return -EIO;
-
- if (!FULL_REGS(target->thread.regs)) {
- /* We have a partial register set. Fill 14-31 with bogus values */
- for (i = 14; i < 32; i++)
- target->thread.regs->gpr[i] = NV_REG_POISON;
- }
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- target->thread.regs,
- 0, offsetof(struct pt_regs, msr));
- if (!ret) {
- unsigned long msr = get_user_msr(target);
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &msr,
- offsetof(struct pt_regs, msr),
- offsetof(struct pt_regs, msr) +
- sizeof(msr));
- }
-
- BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
- offsetof(struct pt_regs, msr) + sizeof(long));
-
- if (!ret)
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.regs->orig_gpr3,
- offsetof(struct pt_regs, orig_gpr3),
- sizeof(struct user_pt_regs));
- if (!ret)
- ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
- sizeof(struct user_pt_regs), -1);
-
- return ret;
-}
-
-static int gpr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- unsigned long reg;
- int ret;
-
- if (target->thread.regs == NULL)
- return -EIO;
-
- CHECK_FULL_REGS(target->thread.regs);
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- target->thread.regs,
- 0, PT_MSR * sizeof(reg));
-
- if (!ret && count > 0) {
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
- PT_MSR * sizeof(reg),
- (PT_MSR + 1) * sizeof(reg));
- if (!ret)
- ret = set_user_msr(target, reg);
- }
-
- BUILD_BUG_ON(offsetof(struct pt_regs, orig_gpr3) !=
- offsetof(struct pt_regs, msr) + sizeof(long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.regs->orig_gpr3,
- PT_ORIG_R3 * sizeof(reg),
- (PT_MAX_PUT_REG + 1) * sizeof(reg));
-
- if (PT_MAX_PUT_REG + 1 < PT_TRAP && !ret)
- ret = user_regset_copyin_ignore(
- &pos, &count, &kbuf, &ubuf,
- (PT_MAX_PUT_REG + 1) * sizeof(reg),
- PT_TRAP * sizeof(reg));
-
- if (!ret && count > 0) {
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®,
- PT_TRAP * sizeof(reg),
- (PT_TRAP + 1) * sizeof(reg));
- if (!ret)
- ret = set_user_trap(target, reg);
- }
-
- if (!ret)
- ret = user_regset_copyin_ignore(
- &pos, &count, &kbuf, &ubuf,
- (PT_TRAP + 1) * sizeof(reg), -1);
-
- return ret;
-}
-
-#ifdef CONFIG_PPC64
-static int ppr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.regs->ppr, 0, sizeof(u64));
-}
-
-static int ppr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.regs->ppr, 0, sizeof(u64));
-}
-
-static int dscr_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.dscr, 0, sizeof(u64));
-}
-static int dscr_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.dscr, 0, sizeof(u64));
-}
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
-static int tar_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.tar, 0, sizeof(u64));
-}
-static int tar_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.tar, 0, sizeof(u64));
-}
-
-static int ebb_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- if (target->thread.used_ebb)
- return regset->n;
-
- return 0;
-}
-
-static int ebb_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- /* Build tests */
- BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
- BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
-
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- if (!target->thread.used_ebb)
- return -ENODATA;
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.ebbrr, 0, 3 * sizeof(unsigned long));
-}
-
-static int ebb_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret = 0;
-
- /* Build tests */
- BUILD_BUG_ON(TSO(ebbrr) + sizeof(unsigned long) != TSO(ebbhr));
- BUILD_BUG_ON(TSO(ebbhr) + sizeof(unsigned long) != TSO(bescr));
-
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- if (target->thread.used_ebb)
- return -ENODATA;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.ebbrr, 0, sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.ebbhr, sizeof(unsigned long),
- 2 * sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.bescr,
- 2 * sizeof(unsigned long), 3 * sizeof(unsigned long));
-
- return ret;
-}
-static int pmu_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- return regset->n;
-}
-
-static int pmu_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- /* Build tests */
- BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
- BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
- BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
- BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
-
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.siar, 0,
- 5 * sizeof(unsigned long));
-}
-
-static int pmu_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- int ret = 0;
-
- /* Build tests */
- BUILD_BUG_ON(TSO(siar) + sizeof(unsigned long) != TSO(sdar));
- BUILD_BUG_ON(TSO(sdar) + sizeof(unsigned long) != TSO(sier));
- BUILD_BUG_ON(TSO(sier) + sizeof(unsigned long) != TSO(mmcr2));
- BUILD_BUG_ON(TSO(mmcr2) + sizeof(unsigned long) != TSO(mmcr0));
-
- if (!cpu_has_feature(CPU_FTR_ARCH_207S))
- return -ENODEV;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.siar, 0,
- sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.sdar, sizeof(unsigned long),
- 2 * sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.sier, 2 * sizeof(unsigned long),
- 3 * sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.mmcr2, 3 * sizeof(unsigned long),
- 4 * sizeof(unsigned long));
-
- if (!ret)
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.mmcr0, 4 * sizeof(unsigned long),
- 5 * sizeof(unsigned long));
- return ret;
-}
-#endif
-
-#ifdef CONFIG_PPC_MEM_KEYS
-static int pkey_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- if (!arch_pkeys_enabled())
- return -ENODEV;
-
- return regset->n;
-}
-
-static int pkey_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- BUILD_BUG_ON(TSO(amr) + sizeof(unsigned long) != TSO(iamr));
- BUILD_BUG_ON(TSO(iamr) + sizeof(unsigned long) != TSO(uamor));
-
- if (!arch_pkeys_enabled())
- return -ENODEV;
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.amr, 0,
- ELF_NPKEY * sizeof(unsigned long));
-}
-
-static int pkey_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- u64 new_amr;
- int ret;
-
- if (!arch_pkeys_enabled())
- return -ENODEV;
-
- /* Only the AMR can be set from userspace */
- if (pos != 0 || count != sizeof(new_amr))
- return -EINVAL;
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &new_amr, 0, sizeof(new_amr));
- if (ret)
- return ret;
-
- /* UAMOR determines which bits of the AMR can be set from userspace. */
- target->thread.amr = (new_amr & target->thread.uamor) |
- (target->thread.amr & ~target->thread.uamor);
-
- return 0;
-}
-#endif /* CONFIG_PPC_MEM_KEYS */
-
-/*
- * These are our native regset flavors.
- */
-enum powerpc_regset {
- REGSET_GPR,
- REGSET_FPR,
-#ifdef CONFIG_ALTIVEC
- REGSET_VMX,
-#endif
-#ifdef CONFIG_VSX
- REGSET_VSX,
-#endif
-#ifdef CONFIG_SPE
- REGSET_SPE,
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- REGSET_TM_CGPR, /* TM checkpointed GPR registers */
- REGSET_TM_CFPR, /* TM checkpointed FPR registers */
- REGSET_TM_CVMX, /* TM checkpointed VMX registers */
- REGSET_TM_CVSX, /* TM checkpointed VSX registers */
- REGSET_TM_SPR, /* TM specific SPR registers */
- REGSET_TM_CTAR, /* TM checkpointed TAR register */
- REGSET_TM_CPPR, /* TM checkpointed PPR register */
- REGSET_TM_CDSCR, /* TM checkpointed DSCR register */
-#endif
-#ifdef CONFIG_PPC64
- REGSET_PPR, /* PPR register */
- REGSET_DSCR, /* DSCR register */
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
- REGSET_TAR, /* TAR register */
- REGSET_EBB, /* EBB registers */
- REGSET_PMR, /* Performance Monitor Registers */
-#endif
-#ifdef CONFIG_PPC_MEM_KEYS
- REGSET_PKEY, /* AMR register */
-#endif
-};
-
-static const struct user_regset native_regsets[] = {
- [REGSET_GPR] = {
- .core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
- .size = sizeof(long), .align = sizeof(long),
- .get = gpr_get, .set = gpr_set
- },
- [REGSET_FPR] = {
- .core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
- .size = sizeof(double), .align = sizeof(double),
- .get = fpr_get, .set = fpr_set
- },
-#ifdef CONFIG_ALTIVEC
- [REGSET_VMX] = {
- .core_note_type = NT_PPC_VMX, .n = 34,
- .size = sizeof(vector128), .align = sizeof(vector128),
- .active = vr_active, .get = vr_get, .set = vr_set
- },
-#endif
-#ifdef CONFIG_VSX
- [REGSET_VSX] = {
- .core_note_type = NT_PPC_VSX, .n = 32,
- .size = sizeof(double), .align = sizeof(double),
- .active = vsr_active, .get = vsr_get, .set = vsr_set
- },
-#endif
-#ifdef CONFIG_SPE
- [REGSET_SPE] = {
- .core_note_type = NT_PPC_SPE, .n = 35,
- .size = sizeof(u32), .align = sizeof(u32),
- .active = evr_active, .get = evr_get, .set = evr_set
- },
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- [REGSET_TM_CGPR] = {
- .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
- .size = sizeof(long), .align = sizeof(long),
- .active = tm_cgpr_active, .get = tm_cgpr_get, .set = tm_cgpr_set
- },
- [REGSET_TM_CFPR] = {
- .core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
- .size = sizeof(double), .align = sizeof(double),
- .active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
- },
- [REGSET_TM_CVMX] = {
- .core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
- .size = sizeof(vector128), .align = sizeof(vector128),
- .active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
- },
- [REGSET_TM_CVSX] = {
- .core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
- .size = sizeof(double), .align = sizeof(double),
- .active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
- },
- [REGSET_TM_SPR] = {
- .core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
- },
- [REGSET_TM_CTAR] = {
- .core_note_type = NT_PPC_TM_CTAR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
- },
- [REGSET_TM_CPPR] = {
- .core_note_type = NT_PPC_TM_CPPR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
- },
- [REGSET_TM_CDSCR] = {
- .core_note_type = NT_PPC_TM_CDSCR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
- },
-#endif
-#ifdef CONFIG_PPC64
- [REGSET_PPR] = {
- .core_note_type = NT_PPC_PPR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = ppr_get, .set = ppr_set
- },
- [REGSET_DSCR] = {
- .core_note_type = NT_PPC_DSCR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = dscr_get, .set = dscr_set
- },
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
- [REGSET_TAR] = {
- .core_note_type = NT_PPC_TAR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = tar_get, .set = tar_set
- },
- [REGSET_EBB] = {
- .core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = ebb_active, .get = ebb_get, .set = ebb_set
- },
- [REGSET_PMR] = {
- .core_note_type = NT_PPC_PMU, .n = ELF_NPMU,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = pmu_active, .get = pmu_get, .set = pmu_set
- },
-#endif
-#ifdef CONFIG_PPC_MEM_KEYS
- [REGSET_PKEY] = {
- .core_note_type = NT_PPC_PKEY, .n = ELF_NPKEY,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = pkey_active, .get = pkey_get, .set = pkey_set
- },
-#endif
-};
-
-static const struct user_regset_view user_ppc_native_view = {
- .name = UTS_MACHINE, .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
- .regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
-};
-
-#include <linux/compat.h>
-
-int gpr32_get_common(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf,
- unsigned long *regs)
-{
- compat_ulong_t *k = kbuf;
- compat_ulong_t __user *u = ubuf;
- compat_ulong_t reg;
-
- pos /= sizeof(reg);
- count /= sizeof(reg);
-
- if (kbuf)
- for (; count > 0 && pos < PT_MSR; --count)
- *k++ = regs[pos++];
- else
- for (; count > 0 && pos < PT_MSR; --count)
- if (__put_user((compat_ulong_t) regs[pos++], u++))
- return -EFAULT;
-
- if (count > 0 && pos == PT_MSR) {
- reg = get_user_msr(target);
- if (kbuf)
- *k++ = reg;
- else if (__put_user(reg, u++))
- return -EFAULT;
- ++pos;
- --count;
- }
-
- if (kbuf)
- for (; count > 0 && pos < PT_REGS_COUNT; --count)
- *k++ = regs[pos++];
- else
- for (; count > 0 && pos < PT_REGS_COUNT; --count)
- if (__put_user((compat_ulong_t) regs[pos++], u++))
- return -EFAULT;
-
- kbuf = k;
- ubuf = u;
- pos *= sizeof(reg);
- count *= sizeof(reg);
- return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
- PT_REGS_COUNT * sizeof(reg), -1);
-}
-
-int gpr32_set_common(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf,
- unsigned long *regs)
-{
- const compat_ulong_t *k = kbuf;
- const compat_ulong_t __user *u = ubuf;
- compat_ulong_t reg;
-
- pos /= sizeof(reg);
- count /= sizeof(reg);
-
- if (kbuf)
- for (; count > 0 && pos < PT_MSR; --count)
- regs[pos++] = *k++;
- else
- for (; count > 0 && pos < PT_MSR; --count) {
- if (__get_user(reg, u++))
- return -EFAULT;
- regs[pos++] = reg;
- }
-
-
- if (count > 0 && pos == PT_MSR) {
- if (kbuf)
- reg = *k++;
- else if (__get_user(reg, u++))
- return -EFAULT;
- set_user_msr(target, reg);
- ++pos;
- --count;
- }
-
- if (kbuf) {
- for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
- regs[pos++] = *k++;
- for (; count > 0 && pos < PT_TRAP; --count, ++pos)
- ++k;
- } else {
- for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
- if (__get_user(reg, u++))
- return -EFAULT;
- regs[pos++] = reg;
- }
- for (; count > 0 && pos < PT_TRAP; --count, ++pos)
- if (__get_user(reg, u++))
- return -EFAULT;
- }
-
- if (count > 0 && pos == PT_TRAP) {
- if (kbuf)
- reg = *k++;
- else if (__get_user(reg, u++))
- return -EFAULT;
- set_user_trap(target, reg);
- ++pos;
- --count;
- }
-
- kbuf = k;
- ubuf = u;
- pos *= sizeof(reg);
- count *= sizeof(reg);
- return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
- (PT_TRAP + 1) * sizeof(reg), -1);
-}
-
-static int gpr32_get(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- int i;
-
- if (target->thread.regs == NULL)
- return -EIO;
-
- if (!FULL_REGS(target->thread.regs)) {
- /*
- * We have a partial register set.
- * Fill 14-31 with bogus values.
- */
- for (i = 14; i < 32; i++)
- target->thread.regs->gpr[i] = NV_REG_POISON;
- }
- return gpr32_get_common(target, regset, pos, count, kbuf, ubuf,
- &target->thread.regs->gpr[0]);
-}
-
-static int gpr32_set(struct task_struct *target,
- const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- if (target->thread.regs == NULL)
- return -EIO;
-
- CHECK_FULL_REGS(target->thread.regs);
- return gpr32_set_common(target, regset, pos, count, kbuf, ubuf,
- &target->thread.regs->gpr[0]);
-}
-
-/*
- * These are the regset flavors matching the CONFIG_PPC32 native set.
- */
-static const struct user_regset compat_regsets[] = {
- [REGSET_GPR] = {
- .core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
- .size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
- .get = gpr32_get, .set = gpr32_set
- },
- [REGSET_FPR] = {
- .core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
- .size = sizeof(double), .align = sizeof(double),
- .get = fpr_get, .set = fpr_set
- },
-#ifdef CONFIG_ALTIVEC
- [REGSET_VMX] = {
- .core_note_type = NT_PPC_VMX, .n = 34,
- .size = sizeof(vector128), .align = sizeof(vector128),
- .active = vr_active, .get = vr_get, .set = vr_set
- },
-#endif
-#ifdef CONFIG_SPE
- [REGSET_SPE] = {
- .core_note_type = NT_PPC_SPE, .n = 35,
- .size = sizeof(u32), .align = sizeof(u32),
- .active = evr_active, .get = evr_get, .set = evr_set
- },
-#endif
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- [REGSET_TM_CGPR] = {
- .core_note_type = NT_PPC_TM_CGPR, .n = ELF_NGREG,
- .size = sizeof(long), .align = sizeof(long),
- .active = tm_cgpr_active,
- .get = tm_cgpr32_get, .set = tm_cgpr32_set
- },
- [REGSET_TM_CFPR] = {
- .core_note_type = NT_PPC_TM_CFPR, .n = ELF_NFPREG,
- .size = sizeof(double), .align = sizeof(double),
- .active = tm_cfpr_active, .get = tm_cfpr_get, .set = tm_cfpr_set
- },
- [REGSET_TM_CVMX] = {
- .core_note_type = NT_PPC_TM_CVMX, .n = ELF_NVMX,
- .size = sizeof(vector128), .align = sizeof(vector128),
- .active = tm_cvmx_active, .get = tm_cvmx_get, .set = tm_cvmx_set
- },
- [REGSET_TM_CVSX] = {
- .core_note_type = NT_PPC_TM_CVSX, .n = ELF_NVSX,
- .size = sizeof(double), .align = sizeof(double),
- .active = tm_cvsx_active, .get = tm_cvsx_get, .set = tm_cvsx_set
- },
- [REGSET_TM_SPR] = {
- .core_note_type = NT_PPC_TM_SPR, .n = ELF_NTMSPRREG,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_spr_active, .get = tm_spr_get, .set = tm_spr_set
- },
- [REGSET_TM_CTAR] = {
- .core_note_type = NT_PPC_TM_CTAR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_tar_active, .get = tm_tar_get, .set = tm_tar_set
- },
- [REGSET_TM_CPPR] = {
- .core_note_type = NT_PPC_TM_CPPR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_ppr_active, .get = tm_ppr_get, .set = tm_ppr_set
- },
- [REGSET_TM_CDSCR] = {
- .core_note_type = NT_PPC_TM_CDSCR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = tm_dscr_active, .get = tm_dscr_get, .set = tm_dscr_set
- },
-#endif
-#ifdef CONFIG_PPC64
- [REGSET_PPR] = {
- .core_note_type = NT_PPC_PPR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = ppr_get, .set = ppr_set
- },
- [REGSET_DSCR] = {
- .core_note_type = NT_PPC_DSCR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = dscr_get, .set = dscr_set
- },
-#endif
-#ifdef CONFIG_PPC_BOOK3S_64
- [REGSET_TAR] = {
- .core_note_type = NT_PPC_TAR, .n = 1,
- .size = sizeof(u64), .align = sizeof(u64),
- .get = tar_get, .set = tar_set
- },
- [REGSET_EBB] = {
- .core_note_type = NT_PPC_EBB, .n = ELF_NEBB,
- .size = sizeof(u64), .align = sizeof(u64),
- .active = ebb_active, .get = ebb_get, .set = ebb_set
- },
-#endif
-};
-
-static const struct user_regset_view user_ppc_compat_view = {
- .name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
- .regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
- if (IS_ENABLED(CONFIG_PPC64) && test_tsk_thread_flag(task, TIF_32BIT))
- return &user_ppc_compat_view;
- return &user_ppc_native_view;
-}
-
-
void user_enable_single_step(struct task_struct *task)
{
struct pt_regs *regs = task->thread.regs;
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 02/12] powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Drop a bunch of #ifdefs CONFIG_PPC64 that are not vital.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/include/asm/ptrace.h | 9 ++++-----
arch/powerpc/include/uapi/asm/ptrace.h | 12 ++++--------
arch/powerpc/kernel/ptrace/ptrace.c | 24 +++---------------------
3 files changed, 11 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index faa5a338ac5a..1506a9c61d50 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -36,11 +36,10 @@ struct pt_regs
unsigned long link;
unsigned long xer;
unsigned long ccr;
-#ifdef CONFIG_PPC64
- unsigned long softe;
-#else
- unsigned long mq;
-#endif
+ union {
+ unsigned long softe;
+ unsigned long mq;
+ };
unsigned long trap;
unsigned long dar;
unsigned long dsisr;
diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
index f5f1ccc740fc..37d7befbb8dc 100644
--- a/arch/powerpc/include/uapi/asm/ptrace.h
+++ b/arch/powerpc/include/uapi/asm/ptrace.h
@@ -43,12 +43,11 @@ struct pt_regs
unsigned long link;
unsigned long xer;
unsigned long ccr;
-#ifdef __powerpc64__
- unsigned long softe; /* Soft enabled/disabled */
-#else
- unsigned long mq; /* 601 only (not used at present) */
+ union {
+ unsigned long softe; /* Soft enabled/disabled */
+ unsigned long mq; /* 601 only (not used at present) */
/* Used on APUS to hold IPL value. */
-#endif
+ };
unsigned long trap; /* Reason for being here */
/* N.B. for critical exceptions on 4xx, the dar and dsisr
fields are overloaded to hold srr0 and srr1. */
@@ -105,11 +104,8 @@ struct pt_regs
#define PT_LNK 36
#define PT_XER 37
#define PT_CCR 38
-#ifndef __powerpc64__
#define PT_MQ 39
-#else
#define PT_SOFTE 39
-#endif
#define PT_TRAP 40
#define PT_DAR 41
#define PT_DSISR 42
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 684b0b315c32..0afb223c4d57 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -113,11 +113,8 @@ static const struct pt_regs_offset regoffset_table[] = {
REG_OFFSET_NAME(link),
REG_OFFSET_NAME(xer),
REG_OFFSET_NAME(ccr),
-#ifdef CONFIG_PPC64
REG_OFFSET_NAME(softe),
-#else
REG_OFFSET_NAME(mq),
-#endif
REG_OFFSET_NAME(trap),
REG_OFFSET_NAME(dar),
REG_OFFSET_NAME(dsisr),
@@ -289,17 +286,15 @@ int ptrace_get_reg(struct task_struct *task, int regno, unsigned long *data)
if (regno == PT_DSCR)
return get_user_dscr(task, data);
-#ifdef CONFIG_PPC64
/*
* softe copies paca->irq_soft_mask variable state. Since irq_soft_mask is
* no more used as a flag, lets force usr to alway see the softe value as 1
* which means interrupts are not soft disabled.
*/
- if (regno == PT_SOFTE) {
+ if (IS_ENABLED(CONFIG_PPC64) && regno == PT_SOFTE) {
*data = 1;
return 0;
}
-#endif
regs_max = sizeof(struct user_pt_regs) / sizeof(unsigned long);
if (regno < regs_max) {
@@ -2013,7 +2008,6 @@ static const struct user_regset_view user_ppc_native_view = {
.regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
};
-#ifdef CONFIG_PPC64
#include <linux/compat.h>
static int gpr32_get_common(struct task_struct *target,
@@ -2287,14 +2281,11 @@ static const struct user_regset_view user_ppc_compat_view = {
.name = "ppc", .e_machine = EM_PPC, .ei_osabi = ELF_OSABI,
.regsets = compat_regsets, .n = ARRAY_SIZE(compat_regsets)
};
-#endif /* CONFIG_PPC64 */
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
-#ifdef CONFIG_PPC64
- if (test_tsk_thread_flag(task, TIF_32BIT))
+ if (IS_ENABLED(CONFIG_PPC64) && test_tsk_thread_flag(task, TIF_32BIT))
return &user_ppc_compat_view;
-#endif
return &user_ppc_native_view;
}
@@ -3081,11 +3072,7 @@ long arch_ptrace(struct task_struct *child, long request,
else
dbginfo.num_data_bps = 0;
dbginfo.num_condition_regs = 0;
-#ifdef CONFIG_PPC64
- dbginfo.data_bp_alignment = 8;
-#else
- dbginfo.data_bp_alignment = 4;
-#endif
+ dbginfo.data_bp_alignment = sizeof(long);
dbginfo.sizeof_condition = 0;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
@@ -3322,12 +3309,10 @@ long do_syscall_trace_enter(struct pt_regs *regs)
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_enter(regs, regs->gpr[0]);
-#ifdef CONFIG_PPC64
if (!is_32bit_task())
audit_syscall_entry(regs->gpr[0], regs->gpr[3], regs->gpr[4],
regs->gpr[5], regs->gpr[6]);
else
-#endif
audit_syscall_entry(regs->gpr[0],
regs->gpr[3] & 0xffffffff,
regs->gpr[4] & 0xffffffff,
@@ -3382,13 +3367,10 @@ void __init pt_regs_check(void)
offsetof(struct user_pt_regs, xer));
BUILD_BUG_ON(offsetof(struct pt_regs, ccr) !=
offsetof(struct user_pt_regs, ccr));
-#ifdef __powerpc64__
BUILD_BUG_ON(offsetof(struct pt_regs, softe) !=
offsetof(struct user_pt_regs, softe));
-#else
BUILD_BUG_ON(offsetof(struct pt_regs, mq) !=
offsetof(struct user_pt_regs, mq));
-#endif
BUILD_BUG_ON(offsetof(struct pt_regs, trap) !=
offsetof(struct user_pt_regs, trap));
BUILD_BUG_ON(offsetof(struct pt_regs, dar) !=
--
2.13.3
^ permalink raw reply related
* [RFC PATCH v2 00/12] Reduce ifdef mess in ptrace
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
The purpose of this series is to reduce the amount of #ifdefs
in ptrace.c
This is a first try. Most of it is done, there are still some #ifdefs that
could go away.
Please comment and tell whether it is worth continuing in that direction.
v2:
- Fixed several build failures. Now builts cleanly on kisskb, see http://kisskb.ellerman.id.au/kisskb/head/840e53cf913d6096dd60181a085f102c85d6e526/
- Droped last patch which is not related to ptrace and can be applies independently.
Christophe Leroy (12):
powerpc: move ptrace into a subdirectory.
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
arch/powerpc/include/asm/ptrace.h | 9 +-
arch/powerpc/include/uapi/asm/ptrace.h | 12 +-
arch/powerpc/kernel/Makefile | 7 +-
arch/powerpc/kernel/hw_breakpoint.c | 16 +
arch/powerpc/kernel/ptrace.c | 3402 ---------------------------
arch/powerpc/kernel/ptrace/Makefile | 20 +
arch/powerpc/kernel/ptrace/ptrace-adv.c | 511 ++++
arch/powerpc/kernel/ptrace/ptrace-altivec.c | 151 ++
arch/powerpc/kernel/ptrace/ptrace-decl.h | 184 ++
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 291 +++
arch/powerpc/kernel/ptrace/ptrace-novsx.c | 83 +
arch/powerpc/kernel/ptrace/ptrace-spe.c | 92 +
arch/powerpc/kernel/ptrace/ptrace-tm.c | 879 +++++++
arch/powerpc/kernel/ptrace/ptrace-view.c | 953 ++++++++
arch/powerpc/kernel/ptrace/ptrace-vsx.c | 177 ++
arch/powerpc/kernel/ptrace/ptrace.c | 430 ++++
arch/powerpc/kernel/{ => ptrace}/ptrace32.c | 0
17 files changed, 3798 insertions(+), 3419 deletions(-)
delete mode 100644 arch/powerpc/kernel/ptrace.c
create mode 100644 arch/powerpc/kernel/ptrace/Makefile
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-adv.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-altivec.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-decl.h
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-noadv.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-novsx.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-spe.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-tm.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-view.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-vsx.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace.c
rename arch/powerpc/kernel/{ => ptrace}/ptrace32.c (100%)
--
2.13.3
^ permalink raw reply
* [RFC PATCH v2 04/12] powerpc/ptrace: split out VSX related functions.
From: Christophe Leroy @ 2019-06-28 15:47 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, mikey
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1561735587.git.christophe.leroy@c-s.fr>
Move CONFIG_VSX functions out of ptrace.c, into
ptrace-vsx.c and ptrace-novsx.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/ptrace/Makefile | 4 +
arch/powerpc/kernel/ptrace/ptrace-decl.h | 26 +++++
arch/powerpc/kernel/ptrace/ptrace-novsx.c | 83 ++++++++++++++
arch/powerpc/kernel/ptrace/ptrace-vsx.c | 177 ++++++++++++++++++++++++++++++
arch/powerpc/kernel/ptrace/ptrace.c | 175 +----------------------------
5 files changed, 293 insertions(+), 172 deletions(-)
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-decl.h
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-novsx.c
create mode 100644 arch/powerpc/kernel/ptrace/ptrace-vsx.c
diff --git a/arch/powerpc/kernel/ptrace/Makefile b/arch/powerpc/kernel/ptrace/Makefile
index 02fb28eb3b55..238c27189078 100644
--- a/arch/powerpc/kernel/ptrace/Makefile
+++ b/arch/powerpc/kernel/ptrace/Makefile
@@ -7,3 +7,7 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
obj-y += ptrace.o
obj-$(CONFIG_PPC64) += ptrace32.o
+obj-$(CONFIG_VSX) += ptrace-vsx.o
+ifneq ($(CONFIG_VSX),y)
+obj-y += ptrace-novsx.o
+endif
diff --git a/arch/powerpc/kernel/ptrace/ptrace-decl.h b/arch/powerpc/kernel/ptrace/ptrace-decl.h
new file mode 100644
index 000000000000..764df4ee9362
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-decl.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/* ptrace-(no)vsx */
+
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+
+/* ptrace-vsx */
+
+int vsr_active(struct task_struct *target, const struct user_regset *regset);
+int vsr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf);
+int vsr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf);
+
+/* ptrace */
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+void flush_tmregs_to_thread(struct task_struct *tsk);
+#else
+static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
+#endif
diff --git a/arch/powerpc/kernel/ptrace/ptrace-novsx.c b/arch/powerpc/kernel/ptrace/ptrace-novsx.c
new file mode 100644
index 000000000000..55fbbb4aa9d7
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-novsx.c
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ * };
+ */
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+ offsetof(struct thread_fp_state, fpr[32]));
+
+ flush_fp_to_thread(target);
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fp_state, 0, -1);
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ * };
+ *
+ */
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
+ offsetof(struct thread_fp_state, fpr[32]));
+
+ flush_fp_to_thread(target);
+
+ return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ &target->thread.fp_state, 0, -1);
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace-vsx.c b/arch/powerpc/kernel/ptrace/ptrace-vsx.c
new file mode 100644
index 000000000000..1d94210cdf63
--- /dev/null
+++ b/arch/powerpc/kernel/ptrace/ptrace-vsx.c
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <trace/syscall.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
+#include <linux/context_tracking.h>
+#include <linux/nospec.h>
+
+#include <linux/uaccess.h>
+#include <linux/pkeys.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/switch_to.h>
+#include <asm/tm.h>
+#include <asm/asm-prototypes.h>
+#include <asm/debug.h>
+#include <asm/hw_breakpoint.h>
+
+#include <kernel/ptrace/ptrace-decl.h>
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ * };
+ */
+int fpr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ u64 buf[33];
+ int i;
+
+ flush_fp_to_thread(target);
+
+ /* copy to local buffer then write that out */
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.TS_FPR(i);
+ buf[32] = target->thread.fp_state.fpscr;
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 fpr[32];
+ * u64 fpscr;
+ * };
+ *
+ */
+int fpr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ u64 buf[33];
+ int i;
+
+ flush_fp_to_thread(target);
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.TS_FPR(i);
+ buf[32] = target->thread.fp_state.fpscr;
+
+ /* copy to local buffer then write that out */
+ i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+ if (i)
+ return i;
+
+ for (i = 0; i < 32 ; i++)
+ target->thread.TS_FPR(i) = buf[i];
+ target->thread.fp_state.fpscr = buf[32];
+ return 0;
+}
+
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls as well. This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+int vsr_active(struct task_struct *target, const struct user_regset *regset)
+{
+ flush_vsx_to_thread(target);
+ return target->thread.used_vsr ? regset->n : 0;
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 vsx[32];
+ * };
+ */
+int vsr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf)
+{
+ u64 buf[32];
+ int ret, i;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_vsx_to_thread(target);
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ buf, 0, 32 * sizeof(double));
+
+ return ret;
+}
+
+/*
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
+ *
+ * Userspace interface buffer layout:
+ *
+ * struct data {
+ * u64 vsx[32];
+ * };
+ */
+int vsr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ u64 buf[32];
+ int ret,i;
+
+ flush_tmregs_to_thread(target);
+ flush_fp_to_thread(target);
+ flush_altivec_to_thread(target);
+ flush_vsx_to_thread(target);
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ buf, 0, 32 * sizeof(double));
+ if (!ret)
+ for (i = 0; i < 32 ; i++)
+ target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+ return ret;
+}
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index cc8efcb404d6..3d0a0b8f8c07 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -48,6 +48,8 @@
#define CREATE_TRACE_POINTS
#include <trace/events/syscalls.h>
+#include <kernel/ptrace/ptrace-decl.h>
+
struct pt_regs_offset {
const char *name;
int offset;
@@ -112,7 +114,7 @@ static const struct pt_regs_offset regoffset_table[] = {
};
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-static void flush_tmregs_to_thread(struct task_struct *tsk)
+void flush_tmregs_to_thread(struct task_struct *tsk)
{
/*
* If task is not current, it will have been flushed already to
@@ -132,8 +134,6 @@ static void flush_tmregs_to_thread(struct task_struct *tsk)
tm_save_sprs(&(tsk->thread));
}
}
-#else
-static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
#endif
/**
@@ -415,91 +415,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * u64 fpr[32];
- * u64 fpscr;
- * };
- */
-static int fpr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
-#ifdef CONFIG_VSX
- u64 buf[33];
- int i;
-
- flush_fp_to_thread(target);
-
- /* copy to local buffer then write that out */
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_FPR(i);
- buf[32] = target->thread.fp_state.fpscr;
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#else
- BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
- offsetof(struct thread_fp_state, fpr[32]));
-
- flush_fp_to_thread(target);
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fp_state, 0, -1);
-#endif
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * u64 fpr[32];
- * u64 fpscr;
- * };
- *
- */
-static int fpr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
-#ifdef CONFIG_VSX
- u64 buf[33];
- int i;
-
- flush_fp_to_thread(target);
-
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.TS_FPR(i);
- buf[32] = target->thread.fp_state.fpscr;
-
- /* copy to local buffer then write that out */
- i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
- if (i)
- return i;
-
- for (i = 0; i < 32 ; i++)
- target->thread.TS_FPR(i) = buf[i];
- target->thread.fp_state.fpscr = buf[32];
- return 0;
-#else
- BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
- offsetof(struct thread_fp_state, fpr[32]));
-
- flush_fp_to_thread(target);
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fp_state, 0, -1);
-#endif
-}
-
#ifdef CONFIG_ALTIVEC
/*
* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
@@ -624,90 +539,6 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
}
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-/*
- * Currently to set and and get all the vsx state, you need to call
- * the fp and VMX calls as well. This only get/sets the lower 32
- * 128bit VSX registers.
- */
-
-static int vsr_active(struct task_struct *target,
- const struct user_regset *regset)
-{
- flush_vsx_to_thread(target);
- return target->thread.used_vsr ? regset->n : 0;
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last
- * checkpointed value of all FPR registers for the current
- * transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * u64 vsx[32];
- * };
- */
-static int vsr_get(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- void *kbuf, void __user *ubuf)
-{
- u64 buf[32];
- int ret, i;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
- flush_vsx_to_thread(target);
-
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-
- ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- buf, 0, 32 * sizeof(double));
-
- return ret;
-}
-
-/*
- * Regardless of transactions, 'fp_state' holds the current running
- * value of all FPR registers and 'ckfp_state' holds the last
- * checkpointed value of all FPR registers for the current
- * transaction.
- *
- * Userspace interface buffer layout:
- *
- * struct data {
- * u64 vsx[32];
- * };
- */
-static int vsr_set(struct task_struct *target, const struct user_regset *regset,
- unsigned int pos, unsigned int count,
- const void *kbuf, const void __user *ubuf)
-{
- u64 buf[32];
- int ret,i;
-
- flush_tmregs_to_thread(target);
- flush_fp_to_thread(target);
- flush_altivec_to_thread(target);
- flush_vsx_to_thread(target);
-
- for (i = 0; i < 32 ; i++)
- buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-
- ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- buf, 0, 32 * sizeof(double));
- if (!ret)
- for (i = 0; i < 32 ; i++)
- target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-
- return ret;
-}
-#endif /* CONFIG_VSX */
-
#ifdef CONFIG_SPE
/*
--
2.13.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox