* Re: [PATCH v3] powerpc/pseries: detect secure and trusted boot state of the system.
From: Michael Ellerman @ 2020-07-16 4:53 UTC (permalink / raw)
To: Daniel Axtens, Nayna Jain, linuxppc-dev
Cc: Nayna Jain, linux-kernel, Mimi Zohar
In-Reply-To: <87v9iothc1.fsf@dja-thinkpad.axtens.net>
Daniel Axtens <dja@axtens.net> writes:
> Hi Nayna,
>
> Looks good to me.
>
> Sorry for not noticing this before, but I think
>> +#include <asm/machdep.h>
> is now superfluous (I think it's leftover from the machine_is
> version?). Maybe mpe will take pity on you and remove it when he picks
> up your patch.
Yeah I did that.
cheers
^ permalink raw reply
* Re: [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Andy Lutomirski @ 2020-07-16 5:18 UTC (permalink / raw)
To: Nicholas Piggin
Cc: linux-arch, Arnd Bergmann, Peter Zijlstra, x86, linux-kernel,
linux-mm, Mathieu Desnoyers, Andy Lutomirski, linuxppc-dev
In-Reply-To: <1594868476.6k5kvx8684.astroid@bobo.none>
> On Jul 15, 2020, at 9:15 PM, Nicholas Piggin <npiggin@gmail.com> wrote:
>
> Excerpts from Mathieu Desnoyers's message of July 14, 2020 12:13 am:
>> ----- On Jul 13, 2020, at 9:47 AM, Nicholas Piggin npiggin@gmail.com wrote:
>>
>>> Excerpts from Nicholas Piggin's message of July 13, 2020 2:45 pm:
>>>> Excerpts from Andy Lutomirski's message of July 11, 2020 3:04 am:
>>>>> Also, as it stands, I can easily see in_irq() ceasing to promise to
>>>>> serialize. There are older kernels for which it does not promise to
>>>>> serialize. And I have plans to make it stop serializing in the
>>>>> nearish future.
>>>>
>>>> You mean x86's return from interrupt? Sounds fun... you'll konw where to
>>>> update the membarrier sync code, at least :)
>>>
>>> Oh, I should actually say Mathieu recently clarified a return from
>>> interrupt doesn't fundamentally need to serialize in order to support
>>> membarrier sync core.
>>
>> Clarification to your statement:
>>
>> Return from interrupt to kernel code does not need to be context serializing
>> as long as kernel serializes before returning to user-space.
>>
>> However, return from interrupt to user-space needs to be context serializing.
>
> Hmm, I'm not sure it's enough even with the sync in the exit_lazy_tlb
> in the right places.
>
> A kernel thread does a use_mm, then it blocks and the user process with
> the same mm runs on that CPU, and then it calls into the kernel, blocks,
> the kernel thread runs again, another CPU issues a membarrier which does
> not IPI this one because it's running a kthread, and then the kthread
> switches back to the user process (still without having unused the mm),
> and then the user process returns from syscall without having done a
> core synchronising instruction.
>
> The cause of the problem is you want to avoid IPI'ing kthreads. Why?
> I'm guessing it really only matters as an optimisation in case of idle
> threads. Idle thread is easy (well, easier) because it won't use_mm, so
> you could check for rq->curr == rq->idle in your loop (in a suitable
> sched accessor function).
>
> But... I'm not really liking this subtlety in the scheduler for all this
> (the scheduler still needs the barriers when switching out of idle).
>
> Can it be improved somehow? Let me forget x86 core sync problem for now
> (that _may_ be a bit harder), and step back and look at what we're doing.
> The memory barrier case would actually suffer from the same problem as
> core sync, because in the same situation it has no implicit mmdrop in
> the scheduler switch code either.
>
> So what are we doing with membarrier? We want any activity caused by the
> set of CPUs/threads specified that can be observed by this thread before
> calling membarrier is appropriately fenced from activity that can be
> observed to happen after the call returns.
>
> CPU0 CPU1
> 1. user stuff
> a. membarrier() 2. enter kernel
> b. read rq->curr 3. rq->curr switched to kthread
> c. is kthread, skip IPI 4. switch_to kthread
> d. return to user 5. rq->curr switched to user thread
> 6. switch_to user thread
> 7. exit kernel
> 8. more user stuff
>
> As far as I can see, the problem is CPU1 might reorder step 5 and step
> 8, so you have mmdrop of lazy mm be a mb after step 6.
>
> But why? The membarrier call only cares that there is a full barrier
> between 1 and 8, right? Which it will get from the previous context
> switch to the kthread.
>
> I must say the memory barrier comments in membarrier could be improved
> a bit (unless I'm missing where the main comment is). It's fine to know
> what barriers pair with one another, but we need to know which exact
> memory accesses it is ordering
>
> /*
> * Matches memory barriers around rq->curr modification in
> * scheduler.
> */
>
> Sure, but it doesn't say what else is being ordered. I think it's just
> the user memory accesses, but would be nice to make that a bit more
> explicit. If we had such comments then we might know this case is safe.
>
> I think the funny powerpc barrier is a similar case of this. If we
> ever see remote_rq->curr->flags & PF_KTHREAD, then we _know_ that
> CPU has or will have issued a memory barrier between running user
> code.
>
> So AFAIKS all this membarrier stuff in kernel/sched/core.c could
> just go away. Except x86 because thread switch doesn't imply core
> sync, so CPU1 between 1 and 8 may never issue a core sync instruction
> the same way a context switch must be a full mb.
>
> Before getting to x86 -- Am I right, or way off track here?
I find it hard to believe that this is x86 only. Why would thread switch imply core sync on any architecture? Is x86 unique in having a stupid expensive core sync that is heavier than smp_mb()?
But I’m wondering if all this deferred sync stuff is wrong. In the brave new world of io_uring and such, perhaps kernel access matter too. Heck, even:
int a[2];
Thread A:
a[0] = 1;
a[1] = 2:
Thread B:
write(fd, a, sizeof(a));
Doesn’t do what thread A is expecting. Admittedly this particular example is nonsense, but maybe there are sensible cases that matter to someone.
—Andy
>
> Thanks,
> Nick
^ permalink raw reply
* Re: [PATCH v3 12/12] ppc64/kexec_file: fix kexec load failure with lack of memory hole
From: Thiago Jung Bauermann @ 2020-07-16 5:43 UTC (permalink / raw)
To: Hari Bathini
Cc: Pingfan Liu, Nayna Jain, Kexec-ml, Mahesh J Salgaonkar,
Mimi Zohar, lkml, linuxppc-dev, Sourabh Jain, Petr Tesarik,
Andrew Morton, Dave Young, Vivek Goyal, Eric Biederman
In-Reply-To: <159466101903.24747.7234708045729315954.stgit@hbathini.in.ibm.com>
Hari Bathini <hbathini@linux.ibm.com> writes:
> The kexec purgatory has to run in real mode. Only the first memory
> block maybe accessible in real mode. And, unlike the case with panic
> kernel, no memory is set aside for regular kexec load. Another thing
> to note is, the memory for crashkernel is reserved at an offset of
> 128MB. So, when crashkernel memory is reserved, the memory ranges to
> load kexec segments shrink further as the generic code only looks for
> memblock free memory ranges and in all likelihood only a tiny bit of
> memory from 0 to 128MB would be available to load kexec segments.
>
> With kdump being used by default in general, kexec file load is likely
> to fail almost always.
Ah. I wasn't aware of this problem.
> This can be fixed by changing the memory hole
> lookup logic for regular kexec to use the same method as kdump.
Right. It doesn't make that much sense to use memblock to find free
memory areas for the kexec kernel, because memblock tracks which memory
areas are free for the currently running kernel. But that's not what
matters for the kernel that will be kexec'd into. In this case, regions
which may be reserved for the current OS instance may well be free for a
freshly started kernel. The kdump method is better at knowing which
memory regions are actually reserved by the firmware/hardware.
> This
> would mean that most kexec segments will overlap with crashkernel
> memory region. That should still be ok as the pages, whose destination
> address isn't available while loading, are placed in an intermediate
> location till a flush to the actual destination address happens during
> kexec boot sequence.
Yes, since the kdump kernel and the "regular" kexec kernel can't be both
booted at the same time, it's not a problem if both plan to use the same
region of memory.
>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> Tested-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
> ---
>
> v2 -> v3:
> * Unchanged. Added Tested-by tag from Pingfan.
>
> v1 -> v2:
> * New patch to fix locating memory hole for kexec_file_load (kexec -s -l)
> when memory is reserved for crashkernel.
>
>
> arch/powerpc/kexec/file_load_64.c | 33 ++++++++++++++-------------------
> 1 file changed, 14 insertions(+), 19 deletions(-)
--
Thiago Jung Bauermann
IBM Linux Technology Center
^ permalink raw reply
* Re: [PATCH v3 04/12] ppc64/kexec_file: avoid stomping memory used by special regions
From: Thiago Jung Bauermann @ 2020-07-16 5:58 UTC (permalink / raw)
To: Hari Bathini
Cc: Pingfan Liu, Petr Tesarik, Nayna Jain, Kexec-ml,
Mahesh J Salgaonkar, Mimi Zohar, lkml, linuxppc-dev, Sourabh Jain,
Andrew Morton, Dave Young, Vivek Goyal, Eric Biederman
In-Reply-To: <87365t8pse.fsf@morokweng.localdomain>
Thiago Jung Bauermann <bauerman@linux.ibm.com> writes:
> Hari Bathini <hbathini@linux.ibm.com> writes:
>
>> diff --git a/arch/powerpc/include/asm/crashdump-ppc64.h b/arch/powerpc/include/asm/crashdump-ppc64.h
>> new file mode 100644
>> index 0000000..90deb46
>> --- /dev/null
>> +++ b/arch/powerpc/include/asm/crashdump-ppc64.h
>> @@ -0,0 +1,10 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +#ifndef _ASM_POWERPC_CRASHDUMP_PPC64_H
>> +#define _ASM_POWERPC_CRASHDUMP_PPC64_H
>> +
>> +/* min & max addresses for kdump load segments */
>> +#define KDUMP_BUF_MIN (crashk_res.start)
>> +#define KDUMP_BUF_MAX ((crashk_res.end < ppc64_rma_size) ? \
>> + crashk_res.end : (ppc64_rma_size - 1))
>> +
>> +#endif /* __ASM_POWERPC_CRASHDUMP_PPC64_H */
>> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
>> index 7008ea1..bf47a01 100644
>> --- a/arch/powerpc/include/asm/kexec.h
>> +++ b/arch/powerpc/include/asm/kexec.h
>> @@ -100,14 +100,16 @@ void relocate_new_kernel(unsigned long indirection_page, unsigned long reboot_co
>> #ifdef CONFIG_KEXEC_FILE
>> extern const struct kexec_file_ops kexec_elf64_ops;
>>
>> -#ifdef CONFIG_IMA_KEXEC
>> #define ARCH_HAS_KIMAGE_ARCH
>>
>> struct kimage_arch {
>> + struct crash_mem *exclude_ranges;
>> +
>> +#ifdef CONFIG_IMA_KEXEC
>> phys_addr_t ima_buffer_addr;
>> size_t ima_buffer_size;
>> -};
>> #endif
>> +};
>>
>> int setup_purgatory(struct kimage *image, const void *slave_code,
>> const void *fdt, unsigned long kernel_load_addr,
>> @@ -125,6 +127,7 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
>> unsigned long initrd_load_addr,
>> unsigned long initrd_len, const char *cmdline);
>> #endif /* CONFIG_PPC64 */
>> +
>> #endif /* CONFIG_KEXEC_FILE */
>>
>> #else /* !CONFIG_KEXEC_CORE */
>> diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
>> index 23ad04c..c695f94 100644
>> --- a/arch/powerpc/kexec/elf_64.c
>> +++ b/arch/powerpc/kexec/elf_64.c
>> @@ -22,6 +22,7 @@
>> #include <linux/of_fdt.h>
>> #include <linux/slab.h>
>> #include <linux/types.h>
>> +#include <asm/crashdump-ppc64.h>
>>
>> static void *elf64_load(struct kimage *image, char *kernel_buf,
>> unsigned long kernel_len, char *initrd,
>> @@ -46,6 +47,12 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
>> if (ret)
>> goto out;
>>
>> + if (image->type == KEXEC_TYPE_CRASH) {
>> + /* min & max buffer values for kdump case */
>> + kbuf.buf_min = pbuf.buf_min = KDUMP_BUF_MIN;
>> + kbuf.buf_max = pbuf.buf_max = KDUMP_BUF_MAX;
>
> This is only my personal opinion and an actual maintainer may disagree,
> but just looking at the lines above, I would assume that KDUMP_BUF_MIN
> and KDUMP_BUF_MAX were constants, when in fact they aren't.
>
> I suggest using static inline macros in <asm/crashdump-ppc64.h>, for
> example:
>
> static inline resource_size_t get_kdump_buf_min(void)
> {
> return crashk_res.start;
> }
>
> static inline resource_size_t get_kdump_buf_max(void)
> {
> return (crashk_res.end < ppc64_rma_size) ? \
> crashk_res.end : (ppc64_rma_size - 1)
> }
I later noticed that KDUMP_BUF_MIN and KDUMP_BUF_MAX are only used here.
In this case, I think the best option is to avoid the macros and inline
functions and just use the actual expressions in the code.
--
Thiago Jung Bauermann
IBM Linux Technology Center
^ permalink raw reply
* Re: [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Nicholas Piggin @ 2020-07-16 6:06 UTC (permalink / raw)
To: Andy Lutomirski
Cc: linux-arch, Arnd Bergmann, Peter Zijlstra, x86, linux-kernel,
linux-mm, Mathieu Desnoyers, Andy Lutomirski, linuxppc-dev
In-Reply-To: <EFAD6E2F-EC08-4EB3-9ECC-2A963C023FC5@amacapital.net>
Excerpts from Andy Lutomirski's message of July 16, 2020 3:18 pm:
>
>
>> On Jul 15, 2020, at 9:15 PM, Nicholas Piggin <npiggin@gmail.com> wrote:
>>
>> Excerpts from Mathieu Desnoyers's message of July 14, 2020 12:13 am:
>>> ----- On Jul 13, 2020, at 9:47 AM, Nicholas Piggin npiggin@gmail.com wrote:
>>>
>>>> Excerpts from Nicholas Piggin's message of July 13, 2020 2:45 pm:
>>>>> Excerpts from Andy Lutomirski's message of July 11, 2020 3:04 am:
>>>>>> Also, as it stands, I can easily see in_irq() ceasing to promise to
>>>>>> serialize. There are older kernels for which it does not promise to
>>>>>> serialize. And I have plans to make it stop serializing in the
>>>>>> nearish future.
>>>>>
>>>>> You mean x86's return from interrupt? Sounds fun... you'll konw where to
>>>>> update the membarrier sync code, at least :)
>>>>
>>>> Oh, I should actually say Mathieu recently clarified a return from
>>>> interrupt doesn't fundamentally need to serialize in order to support
>>>> membarrier sync core.
>>>
>>> Clarification to your statement:
>>>
>>> Return from interrupt to kernel code does not need to be context serializing
>>> as long as kernel serializes before returning to user-space.
>>>
>>> However, return from interrupt to user-space needs to be context serializing.
>>
>> Hmm, I'm not sure it's enough even with the sync in the exit_lazy_tlb
>> in the right places.
>>
>> A kernel thread does a use_mm, then it blocks and the user process with
>> the same mm runs on that CPU, and then it calls into the kernel, blocks,
>> the kernel thread runs again, another CPU issues a membarrier which does
>> not IPI this one because it's running a kthread, and then the kthread
>> switches back to the user process (still without having unused the mm),
>> and then the user process returns from syscall without having done a
>> core synchronising instruction.
>>
>> The cause of the problem is you want to avoid IPI'ing kthreads. Why?
>> I'm guessing it really only matters as an optimisation in case of idle
>> threads. Idle thread is easy (well, easier) because it won't use_mm, so
>> you could check for rq->curr == rq->idle in your loop (in a suitable
>> sched accessor function).
>>
>> But... I'm not really liking this subtlety in the scheduler for all this
>> (the scheduler still needs the barriers when switching out of idle).
>>
>> Can it be improved somehow? Let me forget x86 core sync problem for now
>> (that _may_ be a bit harder), and step back and look at what we're doing.
>> The memory barrier case would actually suffer from the same problem as
>> core sync, because in the same situation it has no implicit mmdrop in
>> the scheduler switch code either.
>>
>> So what are we doing with membarrier? We want any activity caused by the
>> set of CPUs/threads specified that can be observed by this thread before
>> calling membarrier is appropriately fenced from activity that can be
>> observed to happen after the call returns.
>>
>> CPU0 CPU1
>> 1. user stuff
>> a. membarrier() 2. enter kernel
>> b. read rq->curr 3. rq->curr switched to kthread
>> c. is kthread, skip IPI 4. switch_to kthread
>> d. return to user 5. rq->curr switched to user thread
>> 6. switch_to user thread
>> 7. exit kernel
>> 8. more user stuff
>>
>> As far as I can see, the problem is CPU1 might reorder step 5 and step
>> 8, so you have mmdrop of lazy mm be a mb after step 6.
>>
>> But why? The membarrier call only cares that there is a full barrier
>> between 1 and 8, right? Which it will get from the previous context
>> switch to the kthread.
>>
>> I must say the memory barrier comments in membarrier could be improved
>> a bit (unless I'm missing where the main comment is). It's fine to know
>> what barriers pair with one another, but we need to know which exact
>> memory accesses it is ordering
>>
>> /*
>> * Matches memory barriers around rq->curr modification in
>> * scheduler.
>> */
>>
>> Sure, but it doesn't say what else is being ordered. I think it's just
>> the user memory accesses, but would be nice to make that a bit more
>> explicit. If we had such comments then we might know this case is safe.
>>
>> I think the funny powerpc barrier is a similar case of this. If we
>> ever see remote_rq->curr->flags & PF_KTHREAD, then we _know_ that
>> CPU has or will have issued a memory barrier between running user
>> code.
>>
>> So AFAIKS all this membarrier stuff in kernel/sched/core.c could
>> just go away. Except x86 because thread switch doesn't imply core
>> sync, so CPU1 between 1 and 8 may never issue a core sync instruction
>> the same way a context switch must be a full mb.
>>
>> Before getting to x86 -- Am I right, or way off track here?
>
> I find it hard to believe that this is x86 only. Why would thread switch imply core sync on any architecture? Is x86 unique in having a stupid expensive core sync that is heavier than smp_mb()?
It's not the thread switch but the return from kernel to user -- at
least of architectures that implement membarrier SYNC_CORE, x86 can do
that without serializing.
The thread switch is muddying the waters a bit, it's not the actual
thread switch we care about, that just happens to be used as a point
where we try to catch the membarrier IPIs that were skipped due to the
PF_KTHREAD optimisation.
I think that doing said check in the lazy tlb exit code is both
unnecessary for the memory ordering and insufficient for pipeline
serialization.
> But I’m wondering if all this deferred sync stuff is wrong. In the brave new world of io_uring and such, perhaps kernel access matter too. Heck, even:
>
> int a[2];
>
> Thread A:
> a[0] = 1;
> a[1] = 2:
>
> Thread B:
>
> write(fd, a, sizeof(a));
>
> Doesn’t do what thread A is expecting. Admittedly this particular example is nonsense, but maybe there are sensible cases that matter to someone.
I think kernel accesses probably do matter (or at least they should by
principle of least surprise). And so I was doubly misleading by labeling
it as "user stuff". I should have distinguished between previous user or
kernel accesses, as opposed to the kernel accesses specifically for the
implementation of the membarrier call.
So I think the membarrier code gets *that* part right (modulo what we
have seen already) if the kernel access is being done from process
context.
But yes if the access is coming from io_uring that has done
kthread_use_mm or some other random code running in a kernel thread
working on get_user_pages memory or any similar shared vm_insert_pfn
memory, then it goes completely to hell.
So good catch, PF_KTHREAD check is problematic there even if no actual
users exist today. rq->curr == rq->idle test might be better, but can
we have interrupts writing completions into user memory? For performance
I would hope so, so that makes even that test problematic.
Maybe membarrier should close that gap entirely, and work around performance
issue by adding _USER_ONLY flags which explicitly only order user mode
accesess vs other user accesses.
Thanks,
Nick
^ permalink raw reply
* [PATCH v2 0/4] VSX 32-byte vector paired load/store instructions
From: Balamuruhan S @ 2020-07-16 6:15 UTC (permalink / raw)
To: mpe
Cc: ravi.bangoria, jniethe5, Balamuruhan S, paulus, sandipan,
naveen.n.rao, linuxppc-dev
VSX vector paired instructions operates with octword (32-byte) operand
for loads and stores between storage and a pair of two sequential Vector-Scalar
Registers (VSRs). There are 4 word instructions and 2 prefixed instructions
that provides this 32-byte storage access operations - lxvp, lxvpx, stxvp,
stxvpx, plxvpx, pstxvpx.
Emulation infrastructure doesn't have support for these instructions, to
operate with 32-byte storage access and to operate with 2 VSX registers.
This patch series enables the instruction emulation support and adds test
cases for them respectively.
Changes in v2:
-------------
* Fix suggestion from Sandipan, wrap ISA 3.1 instructions with
cpu_has_feature(CPU_FTR_ARCH_31) check.
* Rebase on latest powerpc next branch.
Balamuruhan S (4):
powerpc/sstep: support new VSX vector paired storage access
instructions
powerpc/sstep: support emulation for vsx vector paired storage access
instructions
powerpc ppc-opcode: add opcodes for vsx vector paired instructions
powerpc sstep: add testcases for vsx load/store instructions
arch/powerpc/include/asm/ppc-opcode.h | 11 ++
arch/powerpc/include/asm/sstep.h | 2 +-
arch/powerpc/lib/sstep.c | 110 ++++++++++-
arch/powerpc/lib/test_emulate_step.c | 273 ++++++++++++++++++++++++++
4 files changed, 386 insertions(+), 10 deletions(-)
base-commit: b2b46304e9360f3dda49c9d8ba4a1478b9eecf1d
--
2.24.1
^ permalink raw reply
* [PATCH v2 1/4] powerpc/sstep: support new VSX vector paired storage access instructions
From: Balamuruhan S @ 2020-07-16 6:15 UTC (permalink / raw)
To: mpe
Cc: ravi.bangoria, jniethe5, Balamuruhan S, paulus, sandipan,
naveen.n.rao, linuxppc-dev
In-Reply-To: <20200716061558.1532199-1-bala24@linux.ibm.com>
VSX Vector Paired instructions loads/stores an octword (32 bytes)
from/to storage into two sequential VSRs. Add `analyse_instr()` support
to these new instructions,
* Load VSX Vector Paired (lxvp)
* Load VSX Vector Paired Indexed (lxvpx)
* Prefixed Load VSX Vector Paired (plxvp)
* Store VSX Vector Paired (stxvp)
* Store VSX Vector Paired Indexed (stxvpx)
* Prefixed Store VSX Vector Paired (pstxvp)
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
---
arch/powerpc/lib/sstep.c | 52 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 5abe98216dc2..1af8c1920b36 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -31,6 +31,10 @@ extern char system_call_common[];
#define XER_OV32 0x00080000U
#define XER_CA32 0x00040000U
+#ifdef CONFIG_VSX
+#define VSX_REGISTER_XTP(rd) ((((rd) & 1) << 5) | ((rd) & 0xfe))
+#endif
+
#ifdef CONFIG_PPC_FPU
/*
* Functions in ldstfp.S
@@ -2382,6 +2386,15 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
op->vsx_flags = VSX_SPLAT;
break;
+ case 333: /* lxvpx */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return -1;
+ op->reg = VSX_REGISTER_XTP(rd);
+ op->type = MKOP(LOAD_VSX, 0, 32);
+ op->element_size = 32;
+ op->vsx_flags = VSX_CHECK_VEC;
+ break;
+
case 364: /* lxvwsx */
op->reg = rd | ((word & 1) << 5);
op->type = MKOP(LOAD_VSX, 0, 4);
@@ -2410,6 +2423,14 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
VSX_CHECK_VEC;
break;
}
+ case 461: /* stxvpx */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return -1;
+ op->reg = VSX_REGISTER_XTP(rd);
+ op->type = MKOP(STORE_VSX, 0, 32);
+ op->element_size = 32;
+ op->vsx_flags = VSX_CHECK_VEC;
+ break;
case 524: /* lxsspx */
op->reg = rd | ((word & 1) << 5);
op->type = MKOP(LOAD_VSX, 0, 4);
@@ -2651,6 +2672,23 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
#endif
#ifdef CONFIG_VSX
+ case 6:
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return -1;
+ op->ea = dqform_ea(word, regs);
+ op->reg = VSX_REGISTER_XTP(rd);
+ op->element_size = 32;
+ op->vsx_flags = VSX_CHECK_VEC;
+ switch (word & 0xf) {
+ case 0: /* lxvp */
+ op->type = MKOP(LOAD_VSX, 0, 32);
+ break;
+ case 1: /* stxvp */
+ op->type = MKOP(STORE_VSX, 0, 32);
+ break;
+ }
+ break;
+
case 61: /* stfdp, lxv, stxsd, stxssp, stxv */
switch (word & 7) {
case 0: /* stfdp with LSB of DS field = 0 */
@@ -2715,6 +2753,8 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
}
break;
case 1: /* Prefixed instructions */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return -1;
prefix_r = word & (1ul << 20);
ra = (suffix >> 16) & 0x1f;
op->update_reg = ra;
@@ -2779,12 +2819,24 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
case 57: /* pld */
op->type = MKOP(LOAD, PREFIXED, 8);
break;
+ case 58: /* plxvp */
+ op->reg = VSX_REGISTER_XTP(rd);
+ op->type = MKOP(LOAD_VSX, PREFIXED, 32);
+ op->element_size = 32;
+ op->vsx_flags = VSX_CHECK_VEC;
+ break;
case 60: /* stq */
op->type = MKOP(STORE, PREFIXED, 16);
break;
case 61: /* pstd */
op->type = MKOP(STORE, PREFIXED, 8);
break;
+ case 62: /* pstxvp */
+ op->reg = VSX_REGISTER_XTP(rd);
+ op->type = MKOP(STORE_VSX, PREFIXED, 32);
+ op->element_size = 32;
+ op->vsx_flags = VSX_CHECK_VEC;
+ break;
}
break;
case 1: /* Type 01 Eight-Byte Register-to-Register */
--
2.24.1
^ permalink raw reply related
* [PATCH v2 2/4] powerpc/sstep: support emulation for vsx vector paired storage access instructions
From: Balamuruhan S @ 2020-07-16 6:15 UTC (permalink / raw)
To: mpe
Cc: ravi.bangoria, jniethe5, Balamuruhan S, paulus, sandipan,
naveen.n.rao, linuxppc-dev
In-Reply-To: <20200716061558.1532199-1-bala24@linux.ibm.com>
add emulate_step() changes to support vsx vector paired storage
access instructions that provides octword operands loads/stores
between storage and set of 2 Vector Scalar Registers (VSRs).
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
---
arch/powerpc/include/asm/sstep.h | 2 +-
arch/powerpc/lib/sstep.c | 58 +++++++++++++++++++++++++++-----
2 files changed, 50 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h
index 3b01c69a44aa..a6c0b299bcc9 100644
--- a/arch/powerpc/include/asm/sstep.h
+++ b/arch/powerpc/include/asm/sstep.h
@@ -126,7 +126,7 @@ union vsx_reg {
unsigned long d[2];
float fp[4];
double dp[2];
- __vector128 v;
+ __vector128 v[2];
};
/*
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 1af8c1920b36..010ce81aeffb 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -279,6 +279,19 @@ static nokprobe_inline void do_byte_reverse(void *ptr, int nb)
up[1] = tmp;
break;
}
+ case 32: {
+ unsigned long *up = (unsigned long *)ptr;
+ unsigned long tmp;
+
+ tmp = byterev_8(up[0]);
+ up[0] = byterev_8(up[3]);
+ up[3] = tmp;
+ tmp = byterev_8(up[2]);
+ up[2] = byterev_8(up[1]);
+ up[1] = tmp;
+ break;
+ }
+
#endif
default:
WARN_ON_ONCE(1);
@@ -709,6 +722,8 @@ void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg,
reg->d[0] = reg->d[1] = 0;
switch (op->element_size) {
+ case 32:
+ /* [p]lxvp[x] or [p]stxvp[x] */
case 16:
/* whole vector; lxv[x] or lxvl[l] */
if (size == 0)
@@ -717,7 +732,7 @@ void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg,
if (IS_LE && (op->vsx_flags & VSX_LDLEFT))
rev = !rev;
if (rev)
- do_byte_reverse(reg, 16);
+ do_byte_reverse(reg, size);
break;
case 8:
/* scalar loads, lxvd2x, lxvdsx */
@@ -793,6 +808,22 @@ void emulate_vsx_store(struct instruction_op *op, const union vsx_reg *reg,
size = GETSIZE(op->type);
switch (op->element_size) {
+ case 32:
+ /* [p]lxvp[x] or [p]stxvp[x] */
+ if (size == 0)
+ break;
+ if (IS_LE && (op->vsx_flags & VSX_LDLEFT))
+ rev = !rev;
+ if (rev) {
+ /* reverse 32 bytes */
+ buf.d[0] = byterev_8(reg->d[3]);
+ buf.d[1] = byterev_8(reg->d[2]);
+ buf.d[2] = byterev_8(reg->d[1]);
+ buf.d[3] = byterev_8(reg->d[0]);
+ reg = &buf;
+ }
+ memcpy(mem, reg, size);
+ break;
case 16:
/* stxv, stxvx, stxvl, stxvll */
if (size == 0)
@@ -861,28 +892,33 @@ static nokprobe_inline int do_vsx_load(struct instruction_op *op,
bool cross_endian)
{
int reg = op->reg;
- u8 mem[16];
+ int i, nr_vsx_regs;
+ u8 mem[32];
union vsx_reg buf;
int size = GETSIZE(op->type);
if (!address_ok(regs, ea, size) || copy_mem_in(mem, ea, size, regs))
return -EFAULT;
+ nr_vsx_regs = size / sizeof(__vector128);
emulate_vsx_load(op, &buf, mem, cross_endian);
preempt_disable();
if (reg < 32) {
/* FP regs + extensions */
if (regs->msr & MSR_FP) {
- load_vsrn(reg, &buf);
+ for (i = 0; i < nr_vsx_regs; i++)
+ load_vsrn(reg + i, &buf.v[i]);
} else {
current->thread.fp_state.fpr[reg][0] = buf.d[0];
current->thread.fp_state.fpr[reg][1] = buf.d[1];
}
} else {
if (regs->msr & MSR_VEC)
- load_vsrn(reg, &buf);
+ for (i = 0; i < nr_vsx_regs; i++)
+ load_vsrn(reg + i, &buf.v[i]);
+
else
- current->thread.vr_state.vr[reg - 32] = buf.v;
+ current->thread.vr_state.vr[reg - 32] = buf.v[0];
}
preempt_enable();
return 0;
@@ -893,27 +929,31 @@ static nokprobe_inline int do_vsx_store(struct instruction_op *op,
bool cross_endian)
{
int reg = op->reg;
- u8 mem[16];
+ int i, nr_vsx_regs;
+ u8 mem[32];
union vsx_reg buf;
int size = GETSIZE(op->type);
if (!address_ok(regs, ea, size))
return -EFAULT;
+ nr_vsx_regs = size / sizeof(__vector128);
preempt_disable();
if (reg < 32) {
/* FP regs + extensions */
if (regs->msr & MSR_FP) {
- store_vsrn(reg, &buf);
+ for (i = 0; i < nr_vsx_regs; i++)
+ store_vsrn(reg + i, &buf.v[i]);
} else {
buf.d[0] = current->thread.fp_state.fpr[reg][0];
buf.d[1] = current->thread.fp_state.fpr[reg][1];
}
} else {
if (regs->msr & MSR_VEC)
- store_vsrn(reg, &buf);
+ for (i = 0; i < nr_vsx_regs; i++)
+ store_vsrn(reg + i, &buf.v[i]);
else
- buf.v = current->thread.vr_state.vr[reg - 32];
+ buf.v[0] = current->thread.vr_state.vr[reg - 32];
}
preempt_enable();
emulate_vsx_store(op, &buf, mem, cross_endian);
--
2.24.1
^ permalink raw reply related
* [PATCH v2 3/4] powerpc ppc-opcode: add opcodes for vsx vector paired instructions
From: Balamuruhan S @ 2020-07-16 6:15 UTC (permalink / raw)
To: mpe
Cc: ravi.bangoria, jniethe5, Balamuruhan S, paulus, sandipan,
naveen.n.rao, linuxppc-dev
In-Reply-To: <20200716061558.1532199-1-bala24@linux.ibm.com>
add instruction opcodes for new vsx vector paired instructions,
* Load VSX Vector Paired (lxvp)
* Load VSX Vector Paired Indexed (lxvpx)
* Store VSX Vector Paired (stxvp)
* Store VSX Vector Paired Indexed (stxvpx)
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
---
arch/powerpc/include/asm/ppc-opcode.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 777d5056a71c..f7ffbe11624e 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -210,6 +210,10 @@
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
+#define PPC_INST_LXVP 0x18000000
+#define PPC_INST_LXVPX 0x7c00029a
+#define PPC_INST_STXVP 0x18000001
+#define PPC_INST_STXVPX 0x7c00039a
#define PPC_INST_STDCX 0x7c0001ad
#define PPC_INST_LQARX 0x7c000228
#define PPC_INST_STQCX 0x7c00016d
--
2.24.1
^ permalink raw reply related
* [PATCH v2 4/4] powerpc sstep: add testcases for vsx load/store instructions
From: Balamuruhan S @ 2020-07-16 6:15 UTC (permalink / raw)
To: mpe
Cc: ravi.bangoria, jniethe5, Balamuruhan S, paulus, sandipan,
naveen.n.rao, linuxppc-dev
In-Reply-To: <20200716061558.1532199-1-bala24@linux.ibm.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 9569 bytes --]
add testcases for vsx load/store vector paired instructions,
* Load VSX Vector Paired (lxvp)
* Load VSX Vector Paired Indexed (lxvpx)
* Prefixed Load VSX Vector Paired (plxvp)
* Store VSX Vector Paired (stxvp)
* Store VSX Vector Paired Indexed (stxvpx)
* Prefixed Store VSX Vector Paired (pstxvp)
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
---
arch/powerpc/include/asm/ppc-opcode.h | 7 +
arch/powerpc/lib/test_emulate_step.c | 273 ++++++++++++++++++++++++++
2 files changed, 280 insertions(+)
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index f7ffbe11624e..aa688d13981a 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -389,6 +389,10 @@
#define PPC_INST_VCMPEQUD 0x100000c7
#define PPC_INST_VCMPEQUB 0x10000006
+/* Prefixes */
+#define PPC_PREFIX_MLS 0x06000000
+#define PPC_PREFIX_8LS 0x04000000
+
/* macros to insert fields into opcodes */
#define ___PPC_RA(a) (((a) & 0x1f) << 16)
#define ___PPC_RB(b) (((b) & 0x1f) << 11)
@@ -420,6 +424,9 @@
#define __PPC_CT(t) (((t) & 0x0f) << 21)
#define __PPC_SPR(r) ((((r) & 0x1f) << 16) | ((((r) >> 5) & 0x1f) << 11))
#define __PPC_RC21 (0x1 << 10)
+#define __PPC_PRFX_R(r) (((r) & 0x1) << 20)
+#define __PPC_TP(tp) (((tp) & 0xf) << 22)
+#define __PPC_TX(tx) (((tx) & 0x1) << 21)
/*
* Both low and high 16 bits are added as SIGNED additions, so if low 16 bits
diff --git a/arch/powerpc/lib/test_emulate_step.c b/arch/powerpc/lib/test_emulate_step.c
index 46af80279ebc..98ecbc66bef8 100644
--- a/arch/powerpc/lib/test_emulate_step.c
+++ b/arch/powerpc/lib/test_emulate_step.c
@@ -14,7 +14,13 @@
#include <asm/inst.h>
#define IMM_L(i) ((uintptr_t)(i) & 0xffff)
+#define IMM_H(i) (((uintptr_t)(i) >> 16) & 0x3ffff)
#define IMM_DS(i) ((uintptr_t)(i) & 0xfffc)
+#define IMM_DQ(i) (((uintptr_t)(i) & 0xfff) << 4)
+
+#define PLXVP_EX_OP 0xe8000000
+#define PSTXVP_EX_OP 0xf8000000
+
/*
* Defined with TEST_ prefix so it does not conflict with other
@@ -47,6 +53,21 @@
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_LXVD2X(s, a, b) ppc_inst(PPC_INST_LXVD2X | VSX_XX1((s), R##a, R##b))
#define TEST_STXVD2X(s, a, b) ppc_inst(PPC_INST_STXVD2X | VSX_XX1((s), R##a, R##b))
+#define TEST_LXVP(tp, tx, a, i) \
+ (PPC_INST_LXVP | __PPC_TP(tp) | __PPC_TX(tx) | ___PPC_RA(a) | IMM_DQ(i))
+#define TEST_STXVP(sp, sx, a, i) \
+ (PPC_INST_STXVP | __PPC_TP(sp) | __PPC_TX(sx) | ___PPC_RA(a) | IMM_DQ(i) | 0x1)
+#define TEST_LXVPX(tp, tx, a, b) \
+ (PPC_INST_LXVPX | __PPC_TP(tp) | __PPC_TX(tx) | ___PPC_RA(a) | ___PPC_RB(b))
+#define TEST_STXVPX(sp, sx, a, b) \
+ (PPC_INST_STXVPX | __PPC_TP(sp) | __PPC_TX(sx) | ___PPC_RA(a) | ___PPC_RB(b))
+#define TEST_PLXVP(a, i, pr, tp, tx) \
+ ((PPC_PREFIX_8LS | __PPC_PRFX_R(pr) | IMM_H(i)) << 32 | \
+ (PLXVP_EX_OP | __PPC_TP(tp) | __PPC_TX(tx) | ___PPC_RA(a) | IMM_L(i)))
+#define TEST_PSTXVP(a, i, pr, sp, sx) \
+ ((PPC_PREFIX_8LS | __PPC_PRFX_R(pr) | IMM_H(i)) << 32 | \
+ (PSTXVP_EX_OP | __PPC_TP(sp) | __PPC_TX(sx) | ___PPC_RA(a) | IMM_L(i)))
+
#define TEST_ADD(t, a, b) ppc_inst(PPC_INST_ADD | ___PPC_RT(t) | \
___PPC_RA(a) | ___PPC_RB(b))
#define TEST_ADD_DOT(t, a, b) ppc_inst(PPC_INST_ADD | ___PPC_RT(t) | \
@@ -444,6 +465,255 @@ static void __init test_lxvd2x_stxvd2x(void)
}
#endif /* CONFIG_VSX */
+#ifdef CONFIG_VSX
+static void __init test_lxvp_stxvp(void)
+{
+ struct pt_regs regs;
+ union {
+ vector128 a[2];
+ u32 b[8];
+ } c;
+ u32 cached_b[8];
+ int stepped = -1;
+
+ init_pt_regs(®s);
+
+ /*** lxvp ***/
+
+ cached_b[0] = c.b[0] = 18233;
+ cached_b[1] = c.b[1] = 34863571;
+ cached_b[2] = c.b[2] = 834;
+ cached_b[3] = c.b[3] = 6138911;
+ cached_b[4] = c.b[4] = 1234;
+ cached_b[5] = c.b[5] = 5678;
+ cached_b[6] = c.b[6] = 91011;
+ cached_b[7] = c.b[7] = 121314;
+
+ regs.gpr[4] = (unsigned long)&c.a;
+
+ /*
+ * lxvp XTp,DQ(RA)
+ * XTp = 32×TX + 2×Tp
+ * let TX=1 Tp=1 RA=4 DQ=0
+ */
+ stepped = emulate_step(®s, ppc_inst(TEST_LXVP(1, 1, 4, 0)));
+
+ if (stepped == 1 && cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("lxvp", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("lxvp", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("lxvp", "FAIL");
+ }
+
+ /*** stxvp ***/
+
+ c.b[0] = 21379463;
+ c.b[1] = 87;
+ c.b[2] = 374234;
+ c.b[3] = 4;
+ c.b[4] = 90;
+ c.b[5] = 122;
+ c.b[6] = 555;
+ c.b[7] = 32144;
+
+ /*
+ * stxvp XSp,DQ(RA)
+ * XSp = 32×SX + 2×Sp
+ * let SX=1 Sp=1 RA=4 DQ=0
+ */
+ stepped = emulate_step(®s, ppc_inst(TEST_STXVP(1, 1, 4, 0)));
+
+ if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] &&
+ cached_b[2] == c.b[2] && cached_b[3] == c.b[3] &&
+ cached_b[4] == c.b[4] && cached_b[5] == c.b[5] &&
+ cached_b[6] == c.b[6] && cached_b[7] == c.b[7] &&
+ cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("stxvp", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("stxvp", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("stxvp", "FAIL");
+ }
+}
+#else
+static void __init test_lxvp_stxvp(void)
+{
+ show_result("lxvp", "SKIP (CONFIG_VSX is not set)");
+ show_result("stxvp", "SKIP (CONFIG_VSX is not set)");
+}
+#endif /* CONFIG_VSX */
+
+#ifdef CONFIG_VSX
+static void __init test_lxvpx_stxvpx(void)
+{
+ struct pt_regs regs;
+ union {
+ vector128 a[2];
+ u32 b[8];
+ } c;
+ u32 cached_b[8];
+ int stepped = -1;
+
+ init_pt_regs(®s);
+
+ /*** lxvpx ***/
+
+ cached_b[0] = c.b[0] = 18233;
+ cached_b[1] = c.b[1] = 34863571;
+ cached_b[2] = c.b[2] = 834;
+ cached_b[3] = c.b[3] = 6138911;
+ cached_b[4] = c.b[4] = 1234;
+ cached_b[5] = c.b[5] = 5678;
+ cached_b[6] = c.b[6] = 91011;
+ cached_b[7] = c.b[7] = 121314;
+
+ regs.gpr[3] = (unsigned long)&c.a;
+ regs.gpr[4] = 0;
+
+ /*
+ * lxvpx XTp,RA,RB
+ * XTp = 32×TX + 2×Tp
+ * let TX=1 Tp=1 RA=3 RB=4
+ */
+ stepped = emulate_step(®s, ppc_inst(TEST_LXVPX(1, 1, 3, 4)));
+
+ if (stepped == 1 && cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("lxvpx", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("lxvpx", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("lxvpx", "FAIL");
+ }
+
+ /*** stxvpx ***/
+
+ c.b[0] = 21379463;
+ c.b[1] = 87;
+ c.b[2] = 374234;
+ c.b[3] = 4;
+ c.b[4] = 90;
+ c.b[5] = 122;
+ c.b[6] = 555;
+ c.b[7] = 32144;
+
+ /*
+ * stxvpx XSp,RA,RB
+ * XSp = 32×SX + 2×Sp
+ * let SX=1 Sp=1 RA=3 RB=4
+ */
+ stepped = emulate_step(®s, ppc_inst(TEST_STXVPX(1, 1, 3, 4)));
+
+ if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] &&
+ cached_b[2] == c.b[2] && cached_b[3] == c.b[3] &&
+ cached_b[4] == c.b[4] && cached_b[5] == c.b[5] &&
+ cached_b[6] == c.b[6] && cached_b[7] == c.b[7] &&
+ cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("stxvpx", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("stxvpx", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("stxvpx", "FAIL");
+ }
+}
+#else
+static void __init test_lxvpx_stxvpx(void)
+{
+ show_result("lxvpx", "SKIP (CONFIG_VSX is not set)");
+ show_result("stxvpx", "SKIP (CONFIG_VSX is not set)");
+}
+#endif /* CONFIG_VSX */
+
+#ifdef CONFIG_VSX
+static void __init test_plxvp_pstxvp(void)
+{
+ struct ppc_inst instr;
+ struct pt_regs regs;
+ union {
+ vector128 a[2];
+ u32 b[8];
+ } c;
+ u32 cached_b[8];
+ int stepped = -1;
+
+ /*
+ * plxvp XTp,D(RA),R
+ * XSp = 32×SX + 2×Sp
+ * let RA=3 R=0 D=d0||d1=0 R=0 Sp=1 SX=1
+ */
+ instr = ppc_inst_prefix(TEST_PLXVP(3, 0, 0, 1, 1) >> 32,
+ TEST_PLXVP(3, 0, 0, 1, 1) & 0xffffffff);
+
+ /*** plxvpx ***/
+
+ cached_b[0] = c.b[0] = 18233;
+ cached_b[1] = c.b[1] = 34863571;
+ cached_b[2] = c.b[2] = 834;
+ cached_b[3] = c.b[3] = 6138911;
+ cached_b[4] = c.b[4] = 1234;
+ cached_b[5] = c.b[5] = 5678;
+ cached_b[6] = c.b[6] = 91011;
+ cached_b[7] = c.b[7] = 121314;
+
+ init_pt_regs(®s);
+ regs.gpr[3] = (unsigned long)&c.a;
+
+ stepped = emulate_step(®s, instr);
+ if (stepped == 1 && cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("plxvpx", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("plxvpx", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("plxvpx", "FAIL");
+ }
+
+ /*** pstxvpx ***/
+
+ c.b[0] = 21379463;
+ c.b[1] = 87;
+ c.b[2] = 374234;
+ c.b[3] = 4;
+ c.b[4] = 90;
+ c.b[5] = 122;
+ c.b[6] = 555;
+ c.b[7] = 32144;
+
+ /*
+ * pstxvpx XTp,D(RA),R
+ * XSp = 32×SX + 2×Sp
+ * let RA=3 D=d0||d1=0 R=0 Sp=1 SX=1
+ */
+ instr = ppc_inst_prefix(TEST_PSTXVP(3, 0, 0, 1, 1) >> 32,
+ TEST_PSTXVP(3, 0, 0, 1, 1) & 0xffffffff);
+
+ stepped = emulate_step(®s, instr);
+
+ if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] &&
+ cached_b[2] == c.b[2] && cached_b[3] == c.b[3] &&
+ cached_b[4] == c.b[4] && cached_b[5] == c.b[5] &&
+ cached_b[6] == c.b[6] && cached_b[7] == c.b[7] &&
+ cpu_has_feature(CPU_FTR_VSX)) {
+ show_result("pstxvpx", "PASS");
+ } else {
+ if (!cpu_has_feature(CPU_FTR_VSX))
+ show_result("pstxvpx", "PASS (!CPU_FTR_VSX)");
+ else
+ show_result("pstxvpx", "FAIL");
+ }
+}
+#else
+static void __init test_plxvp_pstxvp(void)
+{
+ show_result("plxvpx", "SKIP (CONFIG_VSX is not set)");
+ show_result("pstxvpx", "SKIP (CONFIG_VSX is not set)");
+}
+#endif /* CONFIG_VSX */
+
static void __init run_tests_load_store(void)
{
test_ld();
@@ -455,6 +725,9 @@ static void __init run_tests_load_store(void)
test_lfdx_stfdx();
test_lvx_stvx();
test_lxvd2x_stxvd2x();
+ test_lxvp_stxvp();
+ test_lxvpx_stxvpx();
+ test_plxvp_pstxvp();
}
struct compute_test {
--
2.24.1
^ permalink raw reply related
* Re: [PATCH v2 1/4] powerpc/sstep: support new VSX vector paired storage access instructions
From: Ravi Bangoria @ 2020-07-16 6:25 UTC (permalink / raw)
To: Balamuruhan S
Cc: Ravi Bangoria, paulus, sandipan, jniethe5, naveen.n.rao,
linuxppc-dev
In-Reply-To: <20200716061558.1532199-2-bala24@linux.ibm.com>
Hi Bala,
> @@ -2382,6 +2386,15 @@ int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
> op->vsx_flags = VSX_SPLAT;
> break;
>
> + case 333: /* lxvpx */
> + if (!cpu_has_feature(CPU_FTR_ARCH_31))
> + return -1;
> + op->reg = VSX_REGISTER_XTP(rd);
> + op->type = MKOP(LOAD_VSX, 0, 32);
> + op->element_size = 32;
> + op->vsx_flags = VSX_CHECK_VEC;
Why VSX_CHECK_VEC?
Ravi
^ permalink raw reply
* Re: [PATCH v2 2/4] powerpc/sstep: support emulation for vsx vector paired storage access instructions
From: Ravi Bangoria @ 2020-07-16 7:12 UTC (permalink / raw)
To: Balamuruhan S
Cc: Ravi Bangoria, paulus, sandipan, jniethe5, naveen.n.rao,
linuxppc-dev
In-Reply-To: <20200716061558.1532199-3-bala24@linux.ibm.com>
Hi Bala,
> @@ -709,6 +722,8 @@ void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg,
> reg->d[0] = reg->d[1] = 0;
>
> switch (op->element_size) {
> + case 32:
> + /* [p]lxvp[x] or [p]stxvp[x] */
This function does not emulate stvxp ^^^^
> case 16:
> /* whole vector; lxv[x] or lxvl[l] */
> if (size == 0)
> @@ -717,7 +732,7 @@ void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg,
> if (IS_LE && (op->vsx_flags & VSX_LDLEFT))
> rev = !rev;
> if (rev)
> - do_byte_reverse(reg, 16);
> + do_byte_reverse(reg, size);
> break;
> case 8:
> /* scalar loads, lxvd2x, lxvdsx */
> @@ -793,6 +808,22 @@ void emulate_vsx_store(struct instruction_op *op, const union vsx_reg *reg,
> size = GETSIZE(op->type);
>
> switch (op->element_size) {
> + case 32:
> + /* [p]lxvp[x] or [p]stxvp[x] */
This function does not emulate lxvp ^^^^
> + if (size == 0)
> + break;
> + if (IS_LE && (op->vsx_flags & VSX_LDLEFT))
> + rev = !rev;
Why this if condition ^^^^ ?
> + if (rev) {
> + /* reverse 32 bytes */
> + buf.d[0] = byterev_8(reg->d[3]);
> + buf.d[1] = byterev_8(reg->d[2]);
> + buf.d[2] = byterev_8(reg->d[1]);
> + buf.d[3] = byterev_8(reg->d[0]);
> + reg = &buf;
> + }
> + memcpy(mem, reg, size);
> + break;
> case 16:
> /* stxv, stxvx, stxvl, stxvll */
> if (size == 0)
> @@ -861,28 +892,33 @@ static nokprobe_inline int do_vsx_load(struct instruction_op *op,
> bool cross_endian)
> {
> int reg = op->reg;
> - u8 mem[16];
> + int i, nr_vsx_regs;
> + u8 mem[32];
> union vsx_reg buf;
> int size = GETSIZE(op->type);
>
> if (!address_ok(regs, ea, size) || copy_mem_in(mem, ea, size, regs))
> return -EFAULT;
>
> + nr_vsx_regs = size / sizeof(__vector128);
> emulate_vsx_load(op, &buf, mem, cross_endian);
> preempt_disable();
> if (reg < 32) {
> /* FP regs + extensions */
> if (regs->msr & MSR_FP) {
> - load_vsrn(reg, &buf);
> + for (i = 0; i < nr_vsx_regs; i++)
> + load_vsrn(reg + i, &buf.v[i]);
> } else {
> current->thread.fp_state.fpr[reg][0] = buf.d[0];
> current->thread.fp_state.fpr[reg][1] = buf.d[1];
Should we change else part as well?
> }
> } else {
> if (regs->msr & MSR_VEC)
> - load_vsrn(reg, &buf);
> + for (i = 0; i < nr_vsx_regs; i++)
> + load_vsrn(reg + i, &buf.v[i]);
> +
Unnecessary line.
> else
> - current->thread.vr_state.vr[reg - 32] = buf.v;
> + current->thread.vr_state.vr[reg - 32] = buf.v[0];
Same here. else part, should we add:
if (vsx 32 byte)
current->thread.vr_state.vr[reg - 32 + 1] = buf.v[1];
> }
> preempt_enable();
> return 0;
> @@ -893,27 +929,31 @@ static nokprobe_inline int do_vsx_store(struct instruction_op *op,
> bool cross_endian)
> {
> int reg = op->reg;
> - u8 mem[16];
> + int i, nr_vsx_regs;
> + u8 mem[32];
> union vsx_reg buf;
> int size = GETSIZE(op->type);
>
> if (!address_ok(regs, ea, size))
> return -EFAULT;
>
> + nr_vsx_regs = size / sizeof(__vector128);
> preempt_disable();
> if (reg < 32) {
> /* FP regs + extensions */
> if (regs->msr & MSR_FP) {
> - store_vsrn(reg, &buf);
> + for (i = 0; i < nr_vsx_regs; i++)
> + store_vsrn(reg + i, &buf.v[i]);
> } else {
> buf.d[0] = current->thread.fp_state.fpr[reg][0];
> buf.d[1] = current->thread.fp_state.fpr[reg][1];
> }
> } else {
> if (regs->msr & MSR_VEC)
> - store_vsrn(reg, &buf);
> + for (i = 0; i < nr_vsx_regs; i++)
> + store_vsrn(reg + i, &buf.v[i]);
> else
> - buf.v = current->thread.vr_state.vr[reg - 32];
> + buf.v[0] = current->thread.vr_state.vr[reg - 32];
> }
> preempt_enable();
> emulate_vsx_store(op, &buf, mem, cross_endian);
>
Ravi
^ permalink raw reply
* [PATCH v4 0/7] Remove default DMA window before creating DDW
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
There are some devices in which a hypervisor may only allow 1 DMA window
to exist at a time, and in those cases, a DDW is never created to them,
since the default DMA window keeps using this resource.
LoPAR recommends this procedure:
1. Remove the default DMA window,
2. Query for which configs the DDW can be created,
3. Create a DDW.
Patch #1:
Create defines for outputs of ibm,ddw-applicable, so it's easier to
identify them.
Patch #2:
- After LoPAR level 2.8, there is an extension that can make
ibm,query-pe-dma-windows to have 6 outputs instead of 5. This changes the
order of the outputs, and that can cause some trouble.
- query_ddw() was updated to check how many outputs the
ibm,query-pe-dma-windows is supposed to have, update the rtas_call() and
deal correctly with the outputs in both cases.
- This patch looks somehow unrelated to the series, but it can avoid future
problems on DDW creation.
Patch #3 moves the window-removing code from remove_ddw() to
remove_dma_window(), creating a way to delete any DMA window, so it can be
used to delete the default DMA window.
Patch #4 makes use of the remove_dma_window() from patch #3 to remove the
default DMA window before query_ddw(). It also implements a new rtas call
to recover the default DMA window, in case anything fails after it was
removed, and a DDW couldn't be created.
Patch #5 moves the part of iommu_table_free() that does struct iommu_table
cleaning into iommu_table_clean, so we can invoke it separately in
patch #6.
Patch #6:
Instead of destroying the created DDW if it doesn't map the whole
partition, make use of it instead of the default DMA window as it improves
performance. Also, update the iommu_table and re-generate the pools.
Patch #7:
Does some renaming of 'direct window' to 'dma window', given the DDW
created can now be also used in indirect mapping if direct mapping is not
available.
All patches were tested into an LPAR with an Ethernet VF:
4005:01:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4 Virtual Function]
Patch #6 It was tested with a 64GB DDW which did not map the whole
partition (128G). Performance improvement noticed by using the DDW instead
of the default DMA window:
64 thread write throughput: +203.0%
64 thread read throughput: +17.5%
1 thread write throughput: +20.5%
1 thread read throughput: +3.43%
Average write latency: -23.0%
Average read latency: -2.26%
---
Changes since v3:
- Introduces new patch #5, to prepare for an important change in #6
- struct iommu_table was not being updated, so include a way to do this
in patch #6.
- Improved patch #4 based in a suggestion from Alexey, to make code
more easily understandable
- v3 link: http://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=187348&state=%2A&archive=both
Changes since v2:
- Change the way ibm,ddw-extensions is accessed, using a proper function
instead of doing this inline everytime it's used.
- Remove previous patch #6, as it doesn't look like it would be useful.
- Add new patch, for changing names from direct* to dma*, as indirect
mapping can be used from now on.
- Fix some typos, corrects some define usage.
- v2 link: http://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=185433&state=%2A&archive=both
Changes since v1:
- Add defines for ibm,ddw-applicable and ibm,ddw-extensions outputs
- Merge aux function query_ddw_out_sz() into query_ddw()
- Merge reset_dma_window() patch (prev. #2) into remove default DMA
window patch (#4).
- Keep device_node *np name instead of using pdn in remove_*()
- Rename 'device_node *pdn' into 'parent' in new functions
- Rename dfl_win to default_win
- Only remove the default DMA window if there is no window available
in first query.
- Check if default DMA window can be restored before removing it.
- Fix 'unitialized use' (found by travis mpe:ci-test)
- New patches #5 and #6
- v1 link: http://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=184420&state=%2A&archive=both
Special thanks for Alexey Kardashevskiy, Brian King and
Oliver O'Halloran for the feedback provided!
Leonardo Bras (7):
powerpc/pseries/iommu: Create defines for operations in
ibm,ddw-applicable
powerpc/pseries/iommu: Update call to ibm,query-pe-dma-windows
powerpc/pseries/iommu: Move window-removing part of remove_ddw into
remove_dma_window
powerpc/pseries/iommu: Remove default DMA window before creating DDW
powerpc/iommu: Move iommu_table cleaning routine to iommu_table_clean
powerpc/pseries/iommu: Make use of DDW even if it does not map the
partition
powerpc/pseries/iommu: Rename "direct window" to "dma window"
arch/powerpc/include/asm/iommu.h | 3 +
arch/powerpc/kernel/iommu.c | 45 ++-
arch/powerpc/platforms/pseries/iommu.c | 380 ++++++++++++++++++-------
3 files changed, 313 insertions(+), 115 deletions(-)
--
2.25.4
^ permalink raw reply
* [PATCH v4 1/7] powerpc/pseries/iommu: Create defines for operations in ibm, ddw-applicable
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
Create defines to help handling ibm,ddw-applicable values, avoiding
confusion about the index of given operations.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 43 ++++++++++++++++----------
1 file changed, 26 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 6d47b4a3ce39..ac0d6376bdad 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -39,6 +39,14 @@
#include "pseries.h"
+enum {
+ DDW_QUERY_PE_DMA_WIN = 0,
+ DDW_CREATE_PE_DMA_WIN = 1,
+ DDW_REMOVE_PE_DMA_WIN = 2,
+
+ DDW_APPLICABLE_SIZE
+};
+
static struct iommu_table_group *iommu_pseries_alloc_group(int node)
{
struct iommu_table_group *table_group;
@@ -771,12 +779,12 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
{
struct dynamic_dma_window_prop *dwp;
struct property *win64;
- u32 ddw_avail[3];
+ u32 ddw_avail[DDW_APPLICABLE_SIZE];
u64 liobn;
int ret = 0;
ret = of_property_read_u32_array(np, "ibm,ddw-applicable",
- &ddw_avail[0], 3);
+ &ddw_avail[0], DDW_APPLICABLE_SIZE);
win64 = of_find_property(np, DIRECT64_PROPNAME, NULL);
if (!win64)
@@ -798,15 +806,15 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
pr_debug("%pOF successfully cleared tces in window.\n",
np);
- ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn);
+ ret = rtas_call(ddw_avail[DDW_REMOVE_PE_DMA_WIN], 1, 1, NULL, liobn);
if (ret)
pr_warn("%pOF: failed to remove direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np, ret, ddw_avail[2], liobn);
+ np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
else
pr_debug("%pOF: successfully removed direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
- np, ret, ddw_avail[2], liobn);
+ np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
delprop:
if (remove_prop)
@@ -889,11 +897,11 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
buid = pdn->phb->buid;
cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
- ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
- cfg_addr, BUID_HI(buid), BUID_LO(buid));
+ ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, 5, (u32 *)query,
+ cfg_addr, BUID_HI(buid), BUID_LO(buid));
dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
- " returned %d\n", ddw_avail[0], cfg_addr, BUID_HI(buid),
- BUID_LO(buid), ret);
+ " returned %d\n", ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr,
+ BUID_HI(buid), BUID_LO(buid), ret);
return ret;
}
@@ -920,15 +928,16 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
- ret = rtas_call(ddw_avail[1], 5, 4, (u32 *)create,
- cfg_addr, BUID_HI(buid), BUID_LO(buid),
- page_shift, window_shift);
+ ret = rtas_call(ddw_avail[DDW_CREATE_PE_DMA_WIN], 5, 4,
+ (u32 *)create, cfg_addr, BUID_HI(buid),
+ BUID_LO(buid), page_shift, window_shift);
} while (rtas_busy_delay(ret));
dev_info(&dev->dev,
"ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d "
- "(liobn = 0x%x starting addr = %x %x)\n", ddw_avail[1],
- cfg_addr, BUID_HI(buid), BUID_LO(buid), page_shift,
- window_shift, ret, create->liobn, create->addr_hi, create->addr_lo);
+ "(liobn = 0x%x starting addr = %x %x)\n",
+ ddw_avail[DDW_CREATE_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
+ BUID_LO(buid), page_shift, window_shift, ret, create->liobn,
+ create->addr_hi, create->addr_lo);
return ret;
}
@@ -996,7 +1005,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
int page_shift;
u64 dma_addr, max_addr;
struct device_node *dn;
- u32 ddw_avail[3];
+ u32 ddw_avail[DDW_APPLICABLE_SIZE];
struct direct_window *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
@@ -1029,7 +1038,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
* the property is actually in the parent, not the PE
*/
ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable",
- &ddw_avail[0], 3);
+ &ddw_avail[0], DDW_APPLICABLE_SIZE);
if (ret)
goto out_failed;
--
2.25.4
^ permalink raw reply related
* [PATCH v4 2/7] powerpc/pseries/iommu: Update call to ibm, query-pe-dma-windows
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can make the number of
outputs from "ibm,query-pe-dma-windows" go from 5 to 6.
This change of output size is meant to expand the address size of
largest_available_block PE TCE from 32-bit to 64-bit, which ends up
shifting page_size and migration_capable.
This ends up requiring the update of
ddw_query_response->largest_available_block from u32 to u64, and manually
assigning the values from the buffer into this struct, according to
output size.
Also, a routine was created for helping reading the ddw extensions as
suggested by LoPAR: First reading the size of the extension array from
index 0, checking if the property exists, and then returning it's value.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 91 +++++++++++++++++++++++---
1 file changed, 81 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index ac0d6376bdad..1a933c4e8bba 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -47,6 +47,12 @@ enum {
DDW_APPLICABLE_SIZE
};
+enum {
+ DDW_EXT_SIZE = 0,
+ DDW_EXT_RESET_DMA_WIN = 1,
+ DDW_EXT_QUERY_OUT_SIZE = 2
+};
+
static struct iommu_table_group *iommu_pseries_alloc_group(int node)
{
struct iommu_table_group *table_group;
@@ -342,7 +348,7 @@ struct direct_window {
/* Dynamic DMA Window support */
struct ddw_query_response {
u32 windows_available;
- u32 largest_available_block;
+ u64 largest_available_block;
u32 page_size;
u32 migration_capable;
};
@@ -877,14 +883,62 @@ static int find_existing_ddw_windows(void)
}
machine_arch_initcall(pseries, find_existing_ddw_windows);
+/**
+ * ddw_read_ext - Get the value of an DDW extension
+ * @np: device node from which the extension value is to be read.
+ * @extnum: index number of the extension.
+ * @value: pointer to return value, modified when extension is available.
+ *
+ * Checks if "ibm,ddw-extensions" exists for this node, and get the value
+ * on index 'extnum'.
+ * It can be used only to check if a property exists, passing value == NULL.
+ *
+ * Returns:
+ * 0 if extension successfully read
+ * -EINVAL if the "ibm,ddw-extensions" does not exist,
+ * -ENODATA if "ibm,ddw-extensions" does not have a value, and
+ * -EOVERFLOW if "ibm,ddw-extensions" does not contain this extension.
+ */
+static inline int ddw_read_ext(const struct device_node *np, int extnum,
+ u32 *value)
+{
+ static const char propname[] = "ibm,ddw-extensions";
+ u32 count;
+ int ret;
+
+ ret = of_property_read_u32_index(np, propname, DDW_EXT_SIZE, &count);
+ if (ret)
+ return ret;
+
+ if (count < extnum)
+ return -EOVERFLOW;
+
+ if (!value)
+ value = &count;
+
+ return of_property_read_u32_index(np, propname, extnum, value);
+}
+
static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
- struct ddw_query_response *query)
+ struct ddw_query_response *query,
+ struct device_node *parent)
{
struct device_node *dn;
struct pci_dn *pdn;
- u32 cfg_addr;
+ u32 cfg_addr, ext_query, query_out[5];
u64 buid;
- int ret;
+ int ret, out_sz;
+
+ /*
+ * From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many
+ * output parameters ibm,query-pe-dma-windows will have, ranging from
+ * 5 to 6.
+ */
+ ret = ddw_read_ext(parent, DDW_EXT_QUERY_OUT_SIZE, &ext_query);
+ if (!ret && ext_query == 1)
+ out_sz = 6;
+ else
+ out_sz = 5;
/*
* Get the config address and phb buid of the PE window.
@@ -897,11 +951,28 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
buid = pdn->phb->buid;
cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
- ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, 5, (u32 *)query,
+ ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, out_sz, query_out,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
- dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x"
- " returned %d\n", ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr,
- BUID_HI(buid), BUID_LO(buid), ret);
+ dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d\n",
+ ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
+ BUID_LO(buid), ret);
+
+ switch (out_sz) {
+ case 5:
+ query->windows_available = query_out[0];
+ query->largest_available_block = query_out[1];
+ query->page_size = query_out[2];
+ query->migration_capable = query_out[3];
+ break;
+ case 6:
+ query->windows_available = query_out[0];
+ query->largest_available_block = ((u64)query_out[1] << 32) |
+ query_out[2];
+ query->page_size = query_out[3];
+ query->migration_capable = query_out[4];
+ break;
+ }
+
return ret;
}
@@ -1049,7 +1120,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
* of page sizes: supported and supported for migrate-dma.
*/
dn = pci_device_to_OF_node(dev);
- ret = query_ddw(dev, ddw_avail, &query);
+ ret = query_ddw(dev, ddw_avail, &query, pdn);
if (ret != 0)
goto out_failed;
@@ -1077,7 +1148,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
/* check largest block * page size > max memory hotplug addr */
max_addr = ddw_memory_hotplug_max();
if (query.largest_available_block < (max_addr >> page_shift)) {
- dev_dbg(&dev->dev, "can't map partition max 0x%llx with %u "
+ dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu "
"%llu-sized pages\n", max_addr, query.largest_available_block,
1ULL << page_shift);
goto out_failed;
--
2.25.4
^ permalink raw reply related
* [PATCH v4 3/7] powerpc/pseries/iommu: Move window-removing part of remove_ddw into remove_dma_window
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
Move the window-removing part of remove_ddw into a new function
(remove_dma_window), so it can be used to remove other DMA windows.
It's useful for removing DMA windows that don't create DIRECT64_PROPNAME
property, like the default DMA window from the device, which uses
"ibm,dma-window".
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 45 +++++++++++++++-----------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 1a933c4e8bba..4e33147825cc 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -781,25 +781,14 @@ static int __init disable_ddw_setup(char *str)
early_param("disable_ddw", disable_ddw_setup);
-static void remove_ddw(struct device_node *np, bool remove_prop)
+static void remove_dma_window(struct device_node *np, u32 *ddw_avail,
+ struct property *win)
{
struct dynamic_dma_window_prop *dwp;
- struct property *win64;
- u32 ddw_avail[DDW_APPLICABLE_SIZE];
u64 liobn;
- int ret = 0;
-
- ret = of_property_read_u32_array(np, "ibm,ddw-applicable",
- &ddw_avail[0], DDW_APPLICABLE_SIZE);
-
- win64 = of_find_property(np, DIRECT64_PROPNAME, NULL);
- if (!win64)
- return;
-
- if (ret || win64->length < sizeof(*dwp))
- goto delprop;
+ int ret;
- dwp = win64->value;
+ dwp = win->value;
liobn = (u64)be32_to_cpu(dwp->liobn);
/* clear the whole window, note the arg is in kernel pages */
@@ -821,10 +810,30 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
pr_debug("%pOF: successfully removed direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
+}
+
+static void remove_ddw(struct device_node *np, bool remove_prop)
+{
+ struct property *win;
+ u32 ddw_avail[DDW_APPLICABLE_SIZE];
+ int ret = 0;
+
+ ret = of_property_read_u32_array(np, "ibm,ddw-applicable",
+ &ddw_avail[0], DDW_APPLICABLE_SIZE);
+ if (ret)
+ return;
+
+ win = of_find_property(np, DIRECT64_PROPNAME, NULL);
+ if (!win)
+ return;
+
+ if (win->length >= sizeof(struct dynamic_dma_window_prop))
+ remove_dma_window(np, ddw_avail, win);
+
+ if (!remove_prop)
+ return;
-delprop:
- if (remove_prop)
- ret = of_remove_property(np, win64);
+ ret = of_remove_property(np, win);
if (ret)
pr_warn("%pOF: failed to remove direct window property: %d\n",
np, ret);
--
2.25.4
^ permalink raw reply related
* [PATCH v4 4/7] powerpc/pseries/iommu: Remove default DMA window before creating DDW
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
On LoPAR "DMA Window Manipulation Calls", it's recommended to remove the
default DMA window for the device, before attempting to configure a DDW,
in order to make the maximum resources available for the next DDW to be
created.
This is a requirement for using DDW on devices in which hypervisor
allows only one DMA window.
If setting up a new DDW fails anywhere after the removal of this
default DMA window, it's needed to restore the default DMA window.
For this, an implementation of ibm,reset-pe-dma-windows rtas call is
needed:
Platforms supporting the DDW option starting with LoPAR level 2.7 implement
ibm,ddw-extensions. The first extension available (index 2) carries the
token for ibm,reset-pe-dma-windows rtas call, which is used to restore
the default DMA window for a device, if it has been deleted.
It does so by resetting the TCE table allocation for the PE to it's
boot time value, available in "ibm,dma-window" device tree node.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 73 +++++++++++++++++++++++---
1 file changed, 66 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 4e33147825cc..fc8d0555e2e9 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1066,6 +1066,38 @@ static phys_addr_t ddw_memory_hotplug_max(void)
return max_addr;
}
+/*
+ * Platforms supporting the DDW option starting with LoPAR level 2.7 implement
+ * ibm,ddw-extensions, which carries the rtas token for
+ * ibm,reset-pe-dma-windows.
+ * That rtas-call can be used to restore the default DMA window for the device.
+ */
+static void reset_dma_window(struct pci_dev *dev, struct device_node *par_dn)
+{
+ int ret;
+ u32 cfg_addr, reset_dma_win;
+ u64 buid;
+ struct device_node *dn;
+ struct pci_dn *pdn;
+
+ ret = ddw_read_ext(par_dn, DDW_EXT_RESET_DMA_WIN, &reset_dma_win);
+ if (ret)
+ return;
+
+ dn = pci_device_to_OF_node(dev);
+ pdn = PCI_DN(dn);
+ buid = pdn->phb->buid;
+ cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
+
+ ret = rtas_call(reset_dma_win, 3, 1, NULL, cfg_addr, BUID_HI(buid),
+ BUID_LO(buid));
+ if (ret)
+ dev_info(&dev->dev,
+ "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d ",
+ reset_dma_win, cfg_addr, BUID_HI(buid), BUID_LO(buid),
+ ret);
+}
+
/*
* If the PE supports dynamic dma windows, and there is space for a table
* that can map all pages in a linear offset, then setup such a table,
@@ -1090,6 +1122,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
struct failed_ddw_pdn *fpdn;
+ bool default_win_removed = false;
mutex_lock(&direct_window_init_mutex);
@@ -1133,14 +1166,38 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
if (ret != 0)
goto out_failed;
+ /*
+ * If there is no window available, remove the default DMA window,
+ * if it's present. This will make all the resources available to the
+ * new DDW window.
+ * If anything fails after this, we need to restore it, so also check
+ * for extensions presence.
+ */
if (query.windows_available == 0) {
- /*
- * no additional windows are available for this device.
- * We might be able to reallocate the existing window,
- * trading in for a larger page size.
- */
- dev_dbg(&dev->dev, "no free dynamic windows");
- goto out_failed;
+ struct property *default_win;
+ int reset_win_ext;
+
+ default_win = of_find_property(pdn, "ibm,dma-window", NULL);
+ if (!default_win)
+ goto out_failed;
+
+ reset_win_ext = ddw_read_ext(pdn, DDW_EXT_RESET_DMA_WIN, NULL);
+ if (reset_win_ext)
+ goto out_failed;
+
+ remove_dma_window(pdn, ddw_avail, default_win);
+ default_win_removed = true;
+
+ /* Query again, to check if the window is available */
+ ret = query_ddw(dev, ddw_avail, &query, pdn);
+ if (ret != 0)
+ goto out_failed;
+
+ if (query.windows_available == 0) {
+ /* no windows are available for this device. */
+ dev_dbg(&dev->dev, "no free dynamic windows");
+ goto out_failed;
+ }
}
if (query.page_size & 4) {
page_shift = 24; /* 16MB */
@@ -1231,6 +1288,8 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
kfree(win64);
out_failed:
+ if (default_win_removed)
+ reset_dma_window(dev, pdn);
fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL);
if (!fpdn)
--
2.25.4
^ permalink raw reply related
* [PATCH v4 5/7] powerpc/iommu: Move iommu_table cleaning routine to iommu_table_clean
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
Move the part of iommu_table_free() that does struct iommu_table cleaning
into iommu_table_clean, so we can invoke it separately.
This new function is useful for cleaning struct iommu_table before
initializing it again with a new DMA window, without having it freed and
allocated again.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/kernel/iommu.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 9704f3f76e63..c3242253a4e7 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -735,21 +735,10 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid,
return tbl;
}
-static void iommu_table_free(struct kref *kref)
+static void iommu_table_clean(struct iommu_table *tbl)
{
unsigned long bitmap_sz;
unsigned int order;
- struct iommu_table *tbl;
-
- tbl = container_of(kref, struct iommu_table, it_kref);
-
- if (tbl->it_ops->free)
- tbl->it_ops->free(tbl);
-
- if (!tbl->it_map) {
- kfree(tbl);
- return;
- }
iommu_table_release_pages(tbl);
@@ -763,6 +752,23 @@ static void iommu_table_free(struct kref *kref)
/* free bitmap */
order = get_order(bitmap_sz);
free_pages((unsigned long) tbl->it_map, order);
+}
+
+static void iommu_table_free(struct kref *kref)
+{
+ struct iommu_table *tbl;
+
+ tbl = container_of(kref, struct iommu_table, it_kref);
+
+ if (tbl->it_ops->free)
+ tbl->it_ops->free(tbl);
+
+ if (!tbl->it_map) {
+ kfree(tbl);
+ return;
+ }
+
+ iommu_table_clean(tbl);
/* free table */
kfree(tbl);
--
2.25.4
^ permalink raw reply related
* [PATCH v4 6/7] powerpc/pseries/iommu: Make use of DDW even if it does not map the partition
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
As of today, if the biggest DDW that can be created can't map the whole
partition, it's creation is skipped and the default DMA window
"ibm,dma-window" is used instead.
Usually this DDW is bigger than the default DMA window, and it performs
better, so it would be nice to use it instead.
The DDW created will be used for direct mapping by default.
If it's not available, indirect mapping will be used instead.
In this case, it's necessary to update the iommu_table so iommu_alloc()
can use the DDW created. For this, iommu_table_update() is called after a
enable_ddw() when direct DMA is not available.
As there will never have both direct and indirect mappings at the same
time, the same property name can be used for the created DDW.
So renaming
define DIRECT64_PROPNAME "linux,direct64-ddr-window-info"
to
define DMA64_PROPNAME "linux,dma64-ddr-window-info"
looks the right thing to do.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/include/asm/iommu.h | 3 ++
arch/powerpc/kernel/iommu.c | 15 +++++++++
arch/powerpc/platforms/pseries/iommu.c | 46 +++++++++++++++++++-------
3 files changed, 52 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 5032f1593299..dc4480a9d60d 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -154,6 +154,9 @@ extern int iommu_tce_table_put(struct iommu_table *tbl);
*/
extern struct iommu_table *iommu_init_table(struct iommu_table *tbl,
int nid, unsigned long res_start, unsigned long res_end);
+void iommu_table_update(struct iommu_table *tbl, int nid, unsigned long liobn,
+ unsigned long win_addr, unsigned long page_shift,
+ unsigned long window_shift);
#define IOMMU_TABLE_GROUP_MAX_TABLES 2
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index c3242253a4e7..cb0cb572eb0a 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -774,6 +774,21 @@ static void iommu_table_free(struct kref *kref)
kfree(tbl);
}
+void iommu_table_update(struct iommu_table *tbl, int nid, unsigned long liobn,
+ unsigned long win_addr, unsigned long page_shift,
+ unsigned long window_shift)
+{
+ iommu_table_clean(tbl);
+
+ /* Update tlb with values from ddw */
+ tbl->it_index = liobn;
+ tbl->it_offset = win_addr >> page_shift;
+ tbl->it_page_shift = page_shift;
+ tbl->it_size = 1 << (window_shift - page_shift);
+
+ iommu_init_table(tbl, nid, 0, 0);
+}
+
struct iommu_table *iommu_tce_table_get(struct iommu_table *tbl)
{
if (kref_get_unless_zero(&tbl->it_kref))
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index fc8d0555e2e9..6e1c9d1599d1 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -364,7 +364,7 @@ static LIST_HEAD(direct_window_list);
static DEFINE_SPINLOCK(direct_window_list_lock);
/* protects initializing window twice for same device */
static DEFINE_MUTEX(direct_window_init_mutex);
-#define DIRECT64_PROPNAME "linux,direct64-ddr-window-info"
+#define DMA64_PROPNAME "linux,dma64-ddr-window-info"
static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
@@ -823,7 +823,7 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
if (ret)
return;
- win = of_find_property(np, DIRECT64_PROPNAME, NULL);
+ win = of_find_property(np, DMA64_PROPNAME, NULL);
if (!win)
return;
@@ -869,8 +869,8 @@ static int find_existing_ddw_windows(void)
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
- for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
- direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
+ for_each_node_with_property(pdn, DMA64_PROPNAME) {
+ direct64 = of_get_property(pdn, DMA64_PROPNAME, &len);
if (!direct64)
continue;
@@ -1210,23 +1210,26 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
query.page_size);
goto out_failed;
}
+
/* verify the window * number of ptes will map the partition */
- /* check largest block * page size > max memory hotplug addr */
max_addr = ddw_memory_hotplug_max();
if (query.largest_available_block < (max_addr >> page_shift)) {
- dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu "
- "%llu-sized pages\n", max_addr, query.largest_available_block,
- 1ULL << page_shift);
- goto out_failed;
+ dev_dbg(&dev->dev, "can't map partition max 0x%llx with %llu %llu-sized pages\n",
+ max_addr, query.largest_available_block,
+ 1ULL << page_shift);
+
+ len = order_base_2(query.largest_available_block << page_shift);
+ } else {
+ len = order_base_2(max_addr);
}
- len = order_base_2(max_addr);
+
win64 = kzalloc(sizeof(struct property), GFP_KERNEL);
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property for 64bit dma window\n");
goto out_failed;
}
- win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
+ win64->name = kstrdup(DMA64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
win64->length = sizeof(*ddwprop);
if (!win64->name || !win64->value) {
@@ -1273,7 +1276,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
- dma_addr = be64_to_cpu(ddwprop->dma_base);
+ /* Only returns the dma_addr if DDW maps the whole partition */
+ if (len == order_base_2(max_addr))
+ dma_addr = be64_to_cpu(ddwprop->dma_base);
goto out_unlock;
out_free_window:
@@ -1302,6 +1307,22 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
return dma_addr;
}
+static void iommu_pseries_table_update(struct pci_dev *dev,
+ struct device_node *pdn)
+{
+ const struct dynamic_dma_window_prop *ddw;
+ struct pci_dn *pci;
+ int len;
+
+ ddw = of_get_property(pdn, DMA64_PROPNAME, &len);
+ if (!ddw || len < sizeof(struct dynamic_dma_window_prop))
+ return;
+
+ iommu_table_update(pci->table_group->tables[0], pci->phb->node,
+ ddw->liobn, ddw->dma_base, ddw->tce_shift,
+ ddw->window_shift);
+}
+
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
{
struct device_node *pdn, *dn;
@@ -1382,6 +1403,7 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
if (pdev->dev.archdata.dma_offset)
return true;
+ iommu_pseries_table_update(pdev, pdn);
}
return false;
--
2.25.4
^ permalink raw reply related
* [PATCH v4 7/7] powerpc/pseries/iommu: Rename "direct window" to "dma window"
From: Leonardo Bras @ 2020-07-16 7:16 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Alexey Kardashevskiy, Joel Stanley, Christophe Leroy,
Leonardo Bras, Thiago Jung Bauermann, Ram Pai, Brian King
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20200716071658.467820-1-leobras.c@gmail.com>
A previous change introduced the usage of DDW as a bigger indirect DMA
mapping when the DDW available size does not map the whole partition.
As most of the code that manipulates direct mappings was reused for
indirect mappings, it's necessary to rename all names and debug/info
messages to reflect that it can be used for both kinds of mapping.
Also, defines DEFAULT_DMA_WIN as "ibm,dma-window" to document that
it's the name of the default DMA window.
Those changes are not supposed to change how the code works in any
way, just adjust naming.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 100 +++++++++++++------------
1 file changed, 52 insertions(+), 48 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 6e1c9d1599d1..5ca952d966a4 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -339,7 +339,7 @@ struct dynamic_dma_window_prop {
__be32 window_shift; /* ilog2(tce_window_size) */
};
-struct direct_window {
+struct dma_win {
struct device_node *device;
const struct dynamic_dma_window_prop *prop;
struct list_head list;
@@ -359,12 +359,13 @@ struct ddw_create_response {
u32 addr_lo;
};
-static LIST_HEAD(direct_window_list);
+static LIST_HEAD(dma_win_list);
/* prevents races between memory on/offline and window creation */
-static DEFINE_SPINLOCK(direct_window_list_lock);
+static DEFINE_SPINLOCK(dma_win_list_lock);
/* protects initializing window twice for same device */
-static DEFINE_MUTEX(direct_window_init_mutex);
+static DEFINE_MUTEX(dma_win_init_mutex);
#define DMA64_PROPNAME "linux,dma64-ddr-window-info"
+#define DEFAULT_DMA_WIN "ibm,dma-window"
static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
@@ -697,15 +698,18 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %pOF\n",
dn);
- /* Find nearest ibm,dma-window, walking up the device tree */
+ /*
+ * Find nearest ibm,dma-window (default DMA window), walking up the
+ * device tree
+ */
for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
- dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+ dma_window = of_get_property(pdn, DEFAULT_DMA_WIN, NULL);
if (dma_window != NULL)
break;
}
if (dma_window == NULL) {
- pr_debug(" no ibm,dma-window property !\n");
+ pr_debug(" no %s property !\n", DEFAULT_DMA_WIN);
return;
}
@@ -803,11 +807,11 @@ static void remove_dma_window(struct device_node *np, u32 *ddw_avail,
ret = rtas_call(ddw_avail[DDW_REMOVE_PE_DMA_WIN], 1, 1, NULL, liobn);
if (ret)
- pr_warn("%pOF: failed to remove direct window: rtas returned "
+ pr_warn("%pOF: failed to remove dma window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
else
- pr_debug("%pOF: successfully removed direct window: rtas returned "
+ pr_debug("%pOF: successfully removed dma window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
}
@@ -835,26 +839,26 @@ static void remove_ddw(struct device_node *np, bool remove_prop)
ret = of_remove_property(np, win);
if (ret)
- pr_warn("%pOF: failed to remove direct window property: %d\n",
+ pr_warn("%pOF: failed to remove dma window property: %d\n",
np, ret);
}
static u64 find_existing_ddw(struct device_node *pdn)
{
- struct direct_window *window;
- const struct dynamic_dma_window_prop *direct64;
+ struct dma_win *window;
+ const struct dynamic_dma_window_prop *dma64;
u64 dma_addr = 0;
- spin_lock(&direct_window_list_lock);
+ spin_lock(&dma_win_list_lock);
/* check if we already created a window and dupe that config if so */
- list_for_each_entry(window, &direct_window_list, list) {
+ list_for_each_entry(window, &dma_win_list, list) {
if (window->device == pdn) {
- direct64 = window->prop;
- dma_addr = be64_to_cpu(direct64->dma_base);
+ dma64 = window->prop;
+ dma_addr = be64_to_cpu(dma64->dma_base);
break;
}
}
- spin_unlock(&direct_window_list_lock);
+ spin_unlock(&dma_win_list_lock);
return dma_addr;
}
@@ -863,15 +867,15 @@ static int find_existing_ddw_windows(void)
{
int len;
struct device_node *pdn;
- struct direct_window *window;
- const struct dynamic_dma_window_prop *direct64;
+ struct dma_win *window;
+ const struct dynamic_dma_window_prop *dma64;
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
for_each_node_with_property(pdn, DMA64_PROPNAME) {
- direct64 = of_get_property(pdn, DMA64_PROPNAME, &len);
- if (!direct64)
+ dma64 = of_get_property(pdn, DMA64_PROPNAME, &len);
+ if (!dma64)
continue;
window = kzalloc(sizeof(*window), GFP_KERNEL);
@@ -882,10 +886,10 @@ static int find_existing_ddw_windows(void)
}
window->device = pdn;
- window->prop = direct64;
- spin_lock(&direct_window_list_lock);
- list_add(&window->list, &direct_window_list);
- spin_unlock(&direct_window_list_lock);
+ window->prop = dma64;
+ spin_lock(&dma_win_list_lock);
+ list_add(&window->list, &dma_win_list);
+ spin_unlock(&dma_win_list_lock);
}
return 0;
@@ -1118,13 +1122,13 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
u64 dma_addr, max_addr;
struct device_node *dn;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
- struct direct_window *window;
+ struct dma_win *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
struct failed_ddw_pdn *fpdn;
bool default_win_removed = false;
- mutex_lock(&direct_window_init_mutex);
+ mutex_lock(&dma_win_init_mutex);
dma_addr = find_existing_ddw(pdn);
if (dma_addr != 0)
@@ -1177,7 +1181,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
struct property *default_win;
int reset_win_ext;
- default_win = of_find_property(pdn, "ibm,dma-window", NULL);
+ default_win = of_find_property(pdn, DEFAULT_DMA_WIN, NULL);
if (!default_win)
goto out_failed;
@@ -1206,8 +1210,8 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
} else if (query.page_size & 1) {
page_shift = 12; /* 4kB */
} else {
- dev_dbg(&dev->dev, "no supported direct page size in mask %x",
- query.page_size);
+ dev_dbg(&dev->dev, "no supported page size in mask %x",
+ query.page_size);
goto out_failed;
}
@@ -1258,7 +1262,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT,
win64->value, tce_setrange_multi_pSeriesLP_walk);
if (ret) {
- dev_info(&dev->dev, "failed to map direct window for %pOF: %d\n",
+ dev_info(&dev->dev, "failed to map DMA window for %pOF: %d\n",
dn, ret);
goto out_free_window;
}
@@ -1272,9 +1276,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
window->device = pdn;
window->prop = ddwprop;
- spin_lock(&direct_window_list_lock);
- list_add(&window->list, &direct_window_list);
- spin_unlock(&direct_window_list_lock);
+ spin_lock(&dma_win_list_lock);
+ list_add(&window->list, &dma_win_list);
+ spin_unlock(&dma_win_list_lock);
/* Only returns the dma_addr if DDW maps the whole partition */
if (len == order_base_2(max_addr))
@@ -1303,7 +1307,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
list_add(&fpdn->list, &failed_ddw_pdn_list);
out_unlock:
- mutex_unlock(&direct_window_init_mutex);
+ mutex_unlock(&dma_win_init_mutex);
return dma_addr;
}
@@ -1343,7 +1347,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
pdn = pdn->parent) {
- dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+ dma_window = of_get_property(pdn, DEFAULT_DMA_WIN, NULL);
if (dma_window)
break;
}
@@ -1394,7 +1398,7 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
*/
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
pdn = pdn->parent) {
- dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+ dma_window = of_get_property(pdn, DEFAULT_DMA_WIN, NULL);
if (dma_window)
break;
}
@@ -1412,29 +1416,29 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
- struct direct_window *window;
+ struct dma_win *window;
struct memory_notify *arg = data;
int ret = 0;
switch (action) {
case MEM_GOING_ONLINE:
- spin_lock(&direct_window_list_lock);
- list_for_each_entry(window, &direct_window_list, list) {
+ spin_lock(&dma_win_list_lock);
+ list_for_each_entry(window, &dma_win_list, list) {
ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
- spin_unlock(&direct_window_list_lock);
+ spin_unlock(&dma_win_list_lock);
break;
case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
- spin_lock(&direct_window_list_lock);
- list_for_each_entry(window, &direct_window_list, list) {
+ spin_lock(&dma_win_list_lock);
+ list_for_each_entry(window, &dma_win_list, list) {
ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
- spin_unlock(&direct_window_list_lock);
+ spin_unlock(&dma_win_list_lock);
break;
default:
break;
@@ -1455,7 +1459,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
struct of_reconfig_data *rd = data;
struct device_node *np = rd->dn;
struct pci_dn *pci = PCI_DN(np);
- struct direct_window *window;
+ struct dma_win *window;
switch (action) {
case OF_RECONFIG_DETACH_NODE:
@@ -1471,15 +1475,15 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
iommu_pseries_free_group(pci->table_group,
np->full_name);
- spin_lock(&direct_window_list_lock);
- list_for_each_entry(window, &direct_window_list, list) {
+ spin_lock(&dma_win_list_lock);
+ list_for_each_entry(window, &dma_win_list, list) {
if (window->device == np) {
list_del(&window->list);
kfree(window);
break;
}
}
- spin_unlock(&direct_window_list_lock);
+ spin_unlock(&dma_win_list_lock);
break;
default:
err = NOTIFY_DONE;
--
2.25.4
^ permalink raw reply related
* [powerpc:merge] BUILD SUCCESS 58a4eb09c4aebaaffa8b4517c71543a41539c096
From: kernel test robot @ 2020-07-16 7:47 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git merge
branch HEAD: 58a4eb09c4aebaaffa8b4517c71543a41539c096 Automatic merge of 'master', 'next' and 'fixes' (2020-07-15 23:12)
elapsed time: 1031m
configs tested: 94
configs skipped: 4
The following configs have been built successfully.
More configs may be tested in the coming days.
arm defconfig
arm allyesconfig
arm allmodconfig
arm allnoconfig
arm64 allyesconfig
arm64 defconfig
arm64 allmodconfig
arm64 allnoconfig
arc axs101_defconfig
c6x evmc6457_defconfig
sh kfr2r09-romimage_defconfig
powerpc gamecube_defconfig
arm lpd270_defconfig
mips malta_defconfig
riscv defconfig
c6x evmc6474_defconfig
arm clps711x_defconfig
arm corgi_defconfig
riscv allyesconfig
arm orion5x_defconfig
arm moxart_defconfig
powerpc amigaone_defconfig
m68k apollo_defconfig
sh edosk7705_defconfig
i386 allnoconfig
i386 allyesconfig
i386 defconfig
i386 debian-10.3
ia64 allmodconfig
ia64 defconfig
ia64 allnoconfig
ia64 allyesconfig
m68k allmodconfig
m68k allnoconfig
m68k sun3_defconfig
m68k defconfig
m68k allyesconfig
nios2 defconfig
nios2 allyesconfig
openrisc defconfig
c6x allyesconfig
c6x allnoconfig
openrisc allyesconfig
nds32 defconfig
nds32 allnoconfig
csky allyesconfig
csky defconfig
alpha defconfig
alpha allyesconfig
xtensa allyesconfig
h8300 allyesconfig
h8300 allmodconfig
xtensa defconfig
arc defconfig
arc allyesconfig
sh allmodconfig
sh allnoconfig
microblaze allnoconfig
mips allyesconfig
mips allnoconfig
mips allmodconfig
parisc allnoconfig
parisc defconfig
parisc allyesconfig
parisc allmodconfig
powerpc allyesconfig
powerpc rhel-kconfig
powerpc allmodconfig
powerpc allnoconfig
powerpc defconfig
i386 randconfig-a016-20200715
i386 randconfig-a011-20200715
i386 randconfig-a015-20200715
i386 randconfig-a012-20200715
i386 randconfig-a013-20200715
i386 randconfig-a014-20200715
riscv allnoconfig
riscv allmodconfig
s390 allyesconfig
s390 allnoconfig
s390 allmodconfig
s390 defconfig
sparc allyesconfig
sparc defconfig
sparc64 defconfig
sparc64 allnoconfig
sparc64 allyesconfig
sparc64 allmodconfig
x86_64 rhel-7.6-kselftests
x86_64 rhel-8.3
x86_64 kexec
x86_64 rhel
x86_64 lkp
x86_64 fedora-25
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply
* RE: [RFC PATCH 00/35] Move all PCIBIOS* definitions into arch/x86
From: David Laight @ 2020-07-16 8:07 UTC (permalink / raw)
To: 'Benjamin Herrenschmidt', Bjorn Helgaas
Cc: Greg Kroah-Hartman, linux-pci, bjorn@helgaas.com, Paul Mackerras,
sparclinux, Toan Le, Christoph Hellwig, Marek Vasut, Rob Herring,
Lorenzo Pieralisi, Sagi Grimberg, Kevin Hilman, Russell King,
Ley Foon Tan, Greg Ungerer, Geert Uytterhoeven, Jakub Kicinski,
Matt Turner, linux-kernel-mentees@lists.linuxfoundation.org,
Guenter Roeck, Arnd Bergmann, Ray Jui, linuxppc-dev, Jens Axboe,
Ivan Kokshaysky, Shuah Khan, Keith Busch, Boris Ostrovsky,
Richard Henderson, Juergen Gross, Thomas Bogendoerfer,
Scott Branden, Jingoo Han, linux-kernel@vger.kernel.org,
Philipp Zabel, Saheed O. Bolarinwa,
'Oliver O'Halloran', Gustavo Pimentel, Bjorn Helgaas,
David S. Miller, Heiner Kallweit
In-Reply-To: <5d4b3a716f85017c17c52a85915fba9e19509e81.camel@kernel.crashing.org>
From: Benjamin Herrenschmidt
> Sent: 15 July 2020 23:49
> On Wed, 2020-07-15 at 17:12 -0500, Bjorn Helgaas wrote:
> > > I've 'played' with PCIe error handling - without much success.
> > > What might be useful is for a driver that has just read ~0u to
> > > be able to ask 'has there been an error signalled for this device?'.
> >
> > In many cases a driver will know that ~0 is not a valid value for the
> > register it's reading. But if ~0 *could* be valid, an interface like
> > you suggest could be useful. I don't think we have anything like that
> > today, but maybe we could. It would certainly be nice if the PCI core
> > noticed, logged, and cleared errors. We have some of that for AER,
> > but that's an optional feature, and support for the error bits in the
> > garden-variety PCI_STATUS register is pretty haphazard. As you note
> > below, this sort of SERR/PERR reporting is frequently hard-wired in
> > ways that takes it out of our purview.
>
> We do have pci_channel_state (via pci_channel_offline()) which covers
> the cases where the underlying error handling (such as EEH or unplug)
> results in the device being offlined though this tend to be
> asynchronous so it might take a few ~0's before you get it.
On one of my systems I don't think the error TLP from the target
made its way past the first bridge - I could see the error in it's
status registers.
But I couldn't find any of the AER status registers in the root bridge.
So I think you'd need a software poll of the bridge registers to
find out (and clear) the error.
The NMI on the dell system (which is supposed to meet some special
NEBS? server requirements) is just stupid.
Too late to be synchronous and impossible for the OS to handle.
David
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)
^ permalink raw reply
* Re: [PATCH v3] powerpc/pseries: detect secure and trusted boot state of the system.
From: Michal Suchánek @ 2020-07-16 8:13 UTC (permalink / raw)
To: Nayna Jain; +Cc: linuxppc-dev, linux-kernel, Mimi Zohar, Daniel Axtens
In-Reply-To: <1594813921-12425-1-git-send-email-nayna@linux.ibm.com>
On Wed, Jul 15, 2020 at 07:52:01AM -0400, Nayna Jain wrote:
> The device-tree property to check secure and trusted boot state is
> different for guests(pseries) compared to baremetal(powernv).
>
> This patch updates the existing is_ppc_secureboot_enabled() and
> is_ppc_trustedboot_enabled() functions to add support for pseries.
>
> The secureboot and trustedboot state are exposed via device-tree property:
> /proc/device-tree/ibm,secure-boot and /proc/device-tree/ibm,trusted-boot
>
> The values of ibm,secure-boot under pseries are interpreted as:
^^^
>
> 0 - Disabled
> 1 - Enabled in Log-only mode. This patch interprets this value as
> disabled, since audit mode is currently not supported for Linux.
> 2 - Enabled and enforced.
> 3-9 - Enabled and enforcing; requirements are at the discretion of the
> operating system.
>
> The values of ibm,trusted-boot under pseries are interpreted as:
^^^
These two should be different I suppose?
Thanks
Michal
> 0 - Disabled
> 1 - Enabled
>
> Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
> Reviewed-by: Daniel Axtens <dja@axtens.net>
> ---
> v3:
> * fixed double check. Thanks Daniel for noticing it.
> * updated patch description.
>
> v2:
> * included Michael Ellerman's feedback.
> * added Daniel Axtens's Reviewed-by.
>
> arch/powerpc/kernel/secure_boot.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/kernel/secure_boot.c b/arch/powerpc/kernel/secure_boot.c
> index 4b982324d368..118bcb5f79c4 100644
> --- a/arch/powerpc/kernel/secure_boot.c
> +++ b/arch/powerpc/kernel/secure_boot.c
> @@ -6,6 +6,7 @@
> #include <linux/types.h>
> #include <linux/of.h>
> #include <asm/secure_boot.h>
> +#include <asm/machdep.h>
>
> static struct device_node *get_ppc_fw_sb_node(void)
> {
> @@ -23,12 +24,19 @@ bool is_ppc_secureboot_enabled(void)
> {
> struct device_node *node;
> bool enabled = false;
> + u32 secureboot;
>
> node = get_ppc_fw_sb_node();
> enabled = of_property_read_bool(node, "os-secureboot-enforcing");
> -
> of_node_put(node);
>
> + if (enabled)
> + goto out;
> +
> + if (!of_property_read_u32(of_root, "ibm,secure-boot", &secureboot))
> + enabled = (secureboot > 1);
> +
> +out:
> pr_info("Secure boot mode %s\n", enabled ? "enabled" : "disabled");
>
> return enabled;
> @@ -38,12 +46,19 @@ bool is_ppc_trustedboot_enabled(void)
> {
> struct device_node *node;
> bool enabled = false;
> + u32 trustedboot;
>
> node = get_ppc_fw_sb_node();
> enabled = of_property_read_bool(node, "trusted-enabled");
> -
> of_node_put(node);
>
> + if (enabled)
> + goto out;
> +
> + if (!of_property_read_u32(of_root, "ibm,trusted-boot", &trustedboot))
> + enabled = (trustedboot > 0);
> +
> +out:
> pr_info("Trusted boot mode %s\n", enabled ? "enabled" : "disabled");
>
> return enabled;
> --
> 2.26.2
>
^ permalink raw reply
* RE: [RFC PATCH 00/35] Move all PCIBIOS* definitions into arch/x86
From: David Laight @ 2020-07-16 8:18 UTC (permalink / raw)
To: 'Bjorn Helgaas'
Cc: Keith Busch, Paul Mackerras, sparclinux, Toan Le, Kjetil Oftedal,
Greg Ungerer, Marek Vasut, Rob Herring, Lorenzo Pieralisi,
Sagi Grimberg, Russell King, Ley Foon Tan, Christoph Hellwig,
Geert Uytterhoeven, Kevin Hilman, linux-pci, Jakub Kicinski,
Matt Turner, linux-kernel-mentees@lists.linuxfoundation.org,
Guenter Roeck, 'Arnd Bergmann', Ray Jui, Jens Axboe,
Ivan Kokshaysky, Shuah Khan, bjorn@helgaas.com, Boris Ostrovsky,
Richard Henderson, Juergen Gross, Bjorn Helgaas,
Thomas Bogendoerfer, Scott Branden, Jingoo Han,
Saheed O. Bolarinwa, linux-kernel@vger.kernel.org, Philipp Zabel,
Greg Kroah-Hartman, Gustavo Pimentel, linuxppc-dev,
David S. Miller, Heiner Kallweit
In-Reply-To: <20200715220135.GA563272@bjorn-Precision-5520>
From: Bjorn Helgaas
> Sent: 15 July 2020 23:02
>
> On Wed, Jul 15, 2020 at 02:24:21PM +0000, David Laight wrote:
> > From: Arnd Bergmann
> > > Sent: 15 July 2020 07:47
> > > On Wed, Jul 15, 2020 at 1:46 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > >
> > > So something like:
> > > >
> > > > void pci_read_config_word(struct pci_dev *dev, int where, u16 *val)
> > > >
> > > > and where we used to return anything non-zero, we just set *val = ~0
> > > > instead? I think we do that already in most, maybe all, cases.
> > >
> > > Right, this is what I had in mind. If we start by removing the handling
> > > of the return code in all files that clearly don't need it, looking at
> > > whatever remains will give a much better idea of what a good interface
> > > should be.
> >
> > It would be best to get rid of that nasty 'u16 *' parameter.
>
> Do you mean nasty because it's basically a return value, but not
> returned as the *function's* return value? I agree that if we were
> starting from scratch it would nicer to have:
>
> u16 pci_read_config_word(struct pci_dev *dev, int where)
>
> but I don't think it's worth changing the thousands of callers just
> for that.
It'll shrink the kernel text size somewhat.
It could also be 'fixed' with a static inline.
Actually you don't even want the result to be u16.
Even though the domain of the value is 0..65535 keeping
the type as int (or unsigned int) will save the compiler
having to generate lots of masking instructions.
Code performance here will be overwhelmed by the time taken
for the config space access.
But more generally all local variables should really be
the size of cpu registers.
On x86-64 you need to use 'unsigned int' for anything used
as array subscripts to avoid the 'sign extend' instructions.
In some code paths it may matter...
David
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
Registration No: 1397386 (Wales)
^ permalink raw reply
* [RFC PATCH] powerpc/pseries/svm: capture instruction faulting on MMIO access, in sprg0 register
From: Ram Pai @ 2020-07-16 8:32 UTC (permalink / raw)
To: kvm-ppc, linuxppc-dev
Cc: sukadev, aik, linuxram, bharata, sathnaga, ldufour, bauerman,
david
An instruction accessing a mmio address, generates a HDSI fault. This fault is
appropriately handled by the Hypervisor. However in the case of secureVMs, the
fault is delivered to the ultravisor.
Unfortunately the Ultravisor has no correct-way to fetch the faulting
instruction. The PEF architecture does not allow Ultravisor to enable MMU
translation. Walking the two level page table to read the instruction can race
with other vcpus modifying the SVM's process scoped page table.
This problem can be correctly solved with some help from the kernel.
Capture the faulting instruction in SPRG0 register, before executing the
faulting instruction. This enables the ultravisor to easily procure the
faulting instruction and emulate it.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
arch/powerpc/include/asm/io.h | 85 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 75 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 635969b..7ef663d 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -35,6 +35,7 @@
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/pgtable.h>
+#include <asm/svm.h>
#define SIO_CONFIG_RA 0x398
#define SIO_CONFIG_RD 0x399
@@ -105,34 +106,98 @@
static inline u##size name(const volatile u##size __iomem *addr) \
{ \
u##size ret; \
- __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
- : "=r" (ret) : "Z" (*addr) : "memory"); \
+ if (is_secure_guest()) { \
+ __asm__ __volatile__("mfsprg0 %3;" \
+ "lnia %2;" \
+ "ld %2,12(%2);" \
+ "mtsprg0 %2;" \
+ "sync;" \
+ #insn" %0,%y1;" \
+ "twi 0,%0,0;" \
+ "isync;" \
+ "mtsprg0 %3" \
+ : "=r" (ret) \
+ : "Z" (*addr), "r" (0), "r" (0) \
+ : "memory"); \
+ } else { \
+ __asm__ __volatile__("sync;" \
+ #insn" %0,%y1;" \
+ "twi 0,%0,0;" \
+ "isync" \
+ : "=r" (ret) : "Z" (*addr) : "memory"); \
+ } \
return ret; \
}
#define DEF_MMIO_OUT_X(name, size, insn) \
static inline void name(volatile u##size __iomem *addr, u##size val) \
{ \
- __asm__ __volatile__("sync;"#insn" %1,%y0" \
- : "=Z" (*addr) : "r" (val) : "memory"); \
- mmiowb_set_pending(); \
+ if (is_secure_guest()) { \
+ __asm__ __volatile__("mfsprg0 %3;" \
+ "lnia %2;" \
+ "ld %2,12(%2);" \
+ "mtsprg0 %2;" \
+ "sync;" \
+ #insn" %1,%y0;" \
+ "mtsprg0 %3" \
+ : "=Z" (*addr) \
+ : "r" (val), "r" (0), "r" (0) \
+ : "memory"); \
+ } else { \
+ __asm__ __volatile__("sync;" \
+ #insn" %1,%y0" \
+ : "=Z" (*addr) : "r" (val) : "memory"); \
+ mmiowb_set_pending(); \
+ } \
}
#define DEF_MMIO_IN_D(name, size, insn) \
static inline u##size name(const volatile u##size __iomem *addr) \
{ \
u##size ret; \
- __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
- : "=r" (ret) : "m" (*addr) : "memory"); \
+ if (is_secure_guest()) { \
+ __asm__ __volatile__("mfsprg0 %3;" \
+ "lnia %2;" \
+ "ld %2,12(%2);" \
+ "mtsprg0 %2;" \
+ "sync;" \
+ #insn"%U1%X1 %0,%1;" \
+ "twi 0,%0,0;" \
+ "isync;" \
+ "mtsprg0 %3" \
+ : "=r" (ret) \
+ : "m" (*addr), "r" (0), "r" (0) \
+ : "memory"); \
+ } else { \
+ __asm__ __volatile__("sync;" \
+ #insn"%U1%X1 %0,%1;" \
+ "twi 0,%0,0;" \
+ "isync" \
+ : "=r" (ret) : "m" (*addr) : "memory"); \
+ } \
return ret; \
}
#define DEF_MMIO_OUT_D(name, size, insn) \
static inline void name(volatile u##size __iomem *addr, u##size val) \
{ \
- __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
- : "=m" (*addr) : "r" (val) : "memory"); \
- mmiowb_set_pending(); \
+ if (is_secure_guest()) { \
+ __asm__ __volatile__("mfsprg0 %3;" \
+ "lnia %2;" \
+ "ld %2,12(%2);" \
+ "mtsprg0 %2;" \
+ "sync;" \
+ #insn"%U0%X0 %1,%0;" \
+ "mtsprg0 %3" \
+ : "=m" (*addr) \
+ : "r" (val), "r" (0), "r" (0) \
+ : "memory"); \
+ } else { \
+ __asm__ __volatile__("sync;" \
+ #insn"%U0%X0 %1,%0" \
+ : "=m" (*addr) : "r" (val) : "memory"); \
+ mmiowb_set_pending(); \
+ } \
}
DEF_MMIO_IN_D(in_8, 8, lbz);
--
1.8.3.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox