* linux-next: manual merge of the set_fs tree with the powerpc tree
From: Stephen Rothwell @ 2020-07-17 9:09 UTC (permalink / raw)
To: Christoph Hellwig, Michael Ellerman, PowerPC
Cc: Nathan Lynch, Linux Next Mailing List, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 819 bytes --]
Hi all,
Today's linux-next merge of the set_fs tree got a conflict in:
arch/powerpc/mm/numa.c
between commit:
c30f931e891e ("powerpc/numa: remove ability to enable topology updates")
from the powerpc tree and commit:
16a04bde8169 ("proc: switch over direct seq_read method calls to seq_read_iter")
from the set_fs tree.
I fixed it up (the former removed the code updated by the latter, so I
just did that) and can carry the fix as necessary. This is now fixed as
far as linux-next is concerned, but any non trivial conflicts should be
mentioned to your upstream maintainer when your tree is submitted for
merging. You may also want to consider cooperating with the maintainer
of the conflicting tree to minimise any particularly complex conflicts.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* [PATCH v2 0/2] Selftest for cpuidle latency measurement
From: Pratik Rajesh Sampat @ 2020-07-17 9:17 UTC (permalink / raw)
To: rjw, daniel.lezcano, mpe, benh, paulus, srivatsa, shuah, npiggin,
ego, svaidy, linux-pm, linuxppc-dev, linux-kernel,
linux-kselftest
v1: https://lkml.org/lkml/2020/7/7/1036
Changelog v1 --> v2
1. Based on Shuah Khan's comment, changed exit code to ksft_skip to
indicate the test is being skipped
2. Change the busy workload for baseline measurement from
"yes > /dev/null" to "cat /dev/random to /dev/null", based on
observed CPU utilization for "yes" consuming ~60% CPU while the
latter consumes 100% of CPUs, giving more accurate baseline numbers
---
The patch series introduces a mechanism to measure wakeup latency for
IPI and timer based interrupts
The motivation behind this series is to find significant deviations
behind advertised latency and resisdency values
To achieve this, we introduce a kernel module and expose its control
knobs through the debugfs interface that the selftests can engage with.
The kernel module provides the following interfaces within
/sys/kernel/debug/latency_test/ for,
1. IPI test:
ipi_cpu_dest # Destination CPU for the IPI
ipi_cpu_src # Origin of the IPI
ipi_latency_ns # Measured latency time in ns
2. Timeout test:
timeout_cpu_src # CPU on which the timer to be queued
timeout_expected_ns # Timer duration
timeout_diff_ns # Difference of actual duration vs expected timer
To include the module, check option and include as module
kernel hacking -> Cpuidle latency selftests
The selftest inserts the module, disables all the idle states and
enables them one by one testing the following:
1. Keeping source CPU constant, iterates through all the CPUS measuring
IPI latency for baseline (CPU is busy with
"cat /dev/random > /dev/null" workload) and the when the CPU is
allowed to be at rest
2. Iterating through all the CPUs, sending expected timer durations to
be equivalent to the residency of the the deepest idle state
enabled and extracting the difference in time between the time of
wakeup and the expected timer duration
Usage
-----
Can be used in conjuction to the rest of the selftests.
Default Output location in: tools/testing/cpuidle/cpuidle.log
To run this test specifically:
$ make -C tools/testing/selftests TARGETS="cpuidle" run_tests
There are a few optinal arguments too that the script can take
[-h <help>]
[-m <location of the module>]
[-o <location of the output>]
Sample output snippet
---------------------
--IPI Latency Test---
--Baseline IPI Latency measurement: CPU Busy--
SRC_CPU DEST_CPU IPI_Latency(ns)
...
0 8 1996
0 9 2125
0 10 1264
0 11 1788
0 12 2045
Baseline Average IPI latency(ns): 1843
---Enabling state: 5---
SRC_CPU DEST_CPU IPI_Latency(ns)
0 8 621719
0 9 624752
0 10 622218
0 11 623968
0 12 621303
Expected IPI latency(ns): 100000
Observed Average IPI latency(ns): 622792
--Timeout Latency Test--
--Baseline Timeout Latency measurement: CPU Busy--
Wakeup_src Baseline_delay(ns)
...
8 2249
9 2226
10 2211
11 2183
12 2263
Baseline Average timeout diff(ns): 2226
---Enabling state: 5---
8 10749
9 10911
10 10912
11 12100
12 73276
Expected timeout(ns): 10000200
Observed Average timeout diff(ns): 23589
Pratik Rajesh Sampat (2):
cpuidle: Trace IPI based and timer based wakeup latency from idle
states
selftest/cpuidle: Add support for cpuidle latency measurement
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/test-cpuidle_latency.c | 150 ++++++++++++
lib/Kconfig.debug | 10 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/cpuidle/Makefile | 6 +
tools/testing/selftests/cpuidle/cpuidle.sh | 257 +++++++++++++++++++++
tools/testing/selftests/cpuidle/settings | 1 +
7 files changed, 426 insertions(+)
create mode 100644 drivers/cpuidle/test-cpuidle_latency.c
create mode 100644 tools/testing/selftests/cpuidle/Makefile
create mode 100755 tools/testing/selftests/cpuidle/cpuidle.sh
create mode 100644 tools/testing/selftests/cpuidle/settings
--
2.25.4
^ permalink raw reply
* [PATCH v2 1/2] cpuidle: Trace IPI based and timer based wakeup latency from idle states
From: Pratik Rajesh Sampat @ 2020-07-17 9:18 UTC (permalink / raw)
To: rjw, daniel.lezcano, mpe, benh, paulus, srivatsa, shuah, npiggin,
ego, svaidy, linux-pm, linuxppc-dev, linux-kernel,
linux-kselftest
In-Reply-To: <20200717091801.29289-1-psampat@linux.ibm.com>
Fire directed smp_call_function_single IPIs from a specified source
CPU to the specified target CPU to reduce the noise we have to wade
through in the trace log.
The module is based on the idea written by Srivatsa Bhat and maintained
by Vaidyanathan Srinivasan internally.
Queue HR timer and measure jitter. Wakeup latency measurement for idle
states using hrtimer. Echo a value in ns to timer_test_function and
watch trace. A HRtimer will be queued and when it fires the expected
wakeup vs actual wakeup is computes and delay printed in ns.
Implemented as a module which utilizes debugfs so that it can be
integrated with selftests.
To include the module, check option and include as module
kernel hacking -> Cpuidle latency selftests
[srivatsa.bhat@linux.vnet.ibm.com: Initial implementation in
cpidle/sysfs]
[svaidy@linux.vnet.ibm.com: wakeup latency measurements using hrtimer
and fix some of the time calculation]
[ego@linux.vnet.ibm.com: Fix some whitespace and tab errors and
increase the resolution of IPI wakeup]
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
---
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/test-cpuidle_latency.c | 150 +++++++++++++++++++++++++
lib/Kconfig.debug | 10 ++
3 files changed, 161 insertions(+)
create mode 100644 drivers/cpuidle/test-cpuidle_latency.c
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index f07800cbb43f..2ae05968078c 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o
obj-$(CONFIG_ARCH_HAS_CPU_RELAX) += poll_state.o
obj-$(CONFIG_HALTPOLL_CPUIDLE) += cpuidle-haltpoll.o
+obj-$(CONFIG_IDLE_LATENCY_SELFTEST) += test-cpuidle_latency.o
##################################################################################
# ARM SoC drivers
diff --git a/drivers/cpuidle/test-cpuidle_latency.c b/drivers/cpuidle/test-cpuidle_latency.c
new file mode 100644
index 000000000000..61574665e972
--- /dev/null
+++ b/drivers/cpuidle/test-cpuidle_latency.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Module-based API test facility for cpuidle latency using IPIs and timers
+ */
+
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+/* IPI based wakeup latencies */
+struct latency {
+ unsigned int src_cpu;
+ unsigned int dest_cpu;
+ ktime_t time_start;
+ ktime_t time_end;
+ u64 latency_ns;
+} ipi_wakeup;
+
+static void measure_latency(void *info)
+{
+ struct latency *v;
+ ktime_t time_diff;
+
+ v = (struct latency *)info;
+ v->time_end = ktime_get();
+ time_diff = ktime_sub(v->time_end, v->time_start);
+ v->latency_ns = ktime_to_ns(time_diff);
+}
+
+void run_smp_call_function_test(unsigned int cpu)
+{
+ ipi_wakeup.src_cpu = smp_processor_id();
+ ipi_wakeup.dest_cpu = cpu;
+ ipi_wakeup.time_start = ktime_get();
+ smp_call_function_single(cpu, measure_latency, &ipi_wakeup, 1);
+}
+
+/* Timer based wakeup latencies */
+struct timer_data {
+ unsigned int src_cpu;
+ u64 timeout;
+ ktime_t time_start;
+ ktime_t time_end;
+ struct hrtimer timer;
+ u64 timeout_diff_ns;
+} timer_wakeup;
+
+static enum hrtimer_restart timer_called(struct hrtimer *hrtimer)
+{
+ struct timer_data *w;
+ ktime_t time_diff;
+
+ w = container_of(hrtimer, struct timer_data, timer);
+ w->time_end = ktime_get();
+
+ time_diff = ktime_sub(w->time_end, w->time_start);
+ time_diff = ktime_sub(time_diff, ns_to_ktime(w->timeout));
+ w->timeout_diff_ns = ktime_to_ns(time_diff);
+ return HRTIMER_NORESTART;
+}
+
+static void run_timer_test(unsigned int ns)
+{
+ hrtimer_init(&timer_wakeup.timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+ timer_wakeup.timer.function = timer_called;
+ timer_wakeup.time_start = ktime_get();
+ timer_wakeup.src_cpu = smp_processor_id();
+ timer_wakeup.timeout = ns;
+
+ hrtimer_start(&timer_wakeup.timer, ns_to_ktime(ns),
+ HRTIMER_MODE_REL_PINNED);
+}
+
+static struct dentry *dir;
+
+static int cpu_read_op(void *data, u64 *value)
+{
+ *value = ipi_wakeup.dest_cpu;
+ return 0;
+}
+
+static int cpu_write_op(void *data, u64 value)
+{
+ run_smp_call_function_test(value);
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(ipi_ops, cpu_read_op, cpu_write_op, "%llu\n");
+
+static int timeout_read_op(void *data, u64 *value)
+{
+ *value = timer_wakeup.timeout;
+ return 0;
+}
+
+static int timeout_write_op(void *data, u64 value)
+{
+ run_timer_test(value);
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(timeout_ops, timeout_read_op, timeout_write_op, "%llu\n");
+
+static int __init latency_init(void)
+{
+ struct dentry *temp;
+
+ dir = debugfs_create_dir("latency_test", 0);
+ if (!dir) {
+ pr_alert("latency_test: failed to create /sys/kernel/debug/latency_test\n");
+ return -1;
+ }
+ temp = debugfs_create_file("ipi_cpu_dest",
+ 0666,
+ dir,
+ NULL,
+ &ipi_ops);
+ if (!temp) {
+ pr_alert("latency_test: failed to create /sys/kernel/debug/ipi_cpu_dest\n");
+ return -1;
+ }
+ debugfs_create_u64("ipi_latency_ns", 0444, dir, &ipi_wakeup.latency_ns);
+ debugfs_create_u32("ipi_cpu_src", 0444, dir, &ipi_wakeup.src_cpu);
+
+ temp = debugfs_create_file("timeout_expected_ns",
+ 0666,
+ dir,
+ NULL,
+ &timeout_ops);
+ if (!temp) {
+ pr_alert("latency_test: failed to create /sys/kernel/debug/timeout_expected_ns\n");
+ return -1;
+ }
+ debugfs_create_u64("timeout_diff_ns", 0444, dir, &timer_wakeup.timeout_diff_ns);
+ debugfs_create_u32("timeout_cpu_src", 0444, dir, &timer_wakeup.src_cpu);
+ pr_info("Latency Test module loaded\n");
+ return 0;
+}
+
+static void __exit latency_cleanup(void)
+{
+ pr_info("Cleaning up Latency Test module.\n");
+ debugfs_remove_recursive(dir);
+}
+
+module_init(latency_init);
+module_exit(latency_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("IBM Corporation");
+MODULE_DESCRIPTION("Measuring idle latency for IPIs and Timers");
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index d74ac0fd6b2d..e2283790245a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1375,6 +1375,16 @@ config DEBUG_KOBJECT
If you say Y here, some extra kobject debugging messages will be sent
to the syslog.
+config IDLE_LATENCY_SELFTEST
+ tristate "Cpuidle latency selftests"
+ depends on CPU_IDLE
+ help
+ This option provides a kernel module that runs tests using the IPI and
+ timers to measure latency.
+
+ Say M if you want these self tests to build as a module.
+ Say N if you are unsure.
+
config DEBUG_KOBJECT_RELEASE
bool "kobject release debugging"
depends on DEBUG_OBJECTS_TIMERS
--
2.25.4
^ permalink raw reply related
* [PATCH v2 2/2] selftest/cpuidle: Add support for cpuidle latency measurement
From: Pratik Rajesh Sampat @ 2020-07-17 9:18 UTC (permalink / raw)
To: rjw, daniel.lezcano, mpe, benh, paulus, srivatsa, shuah, npiggin,
ego, svaidy, linux-pm, linuxppc-dev, linux-kernel,
linux-kselftest
In-Reply-To: <20200717091801.29289-1-psampat@linux.ibm.com>
This patch adds support to trace IPI based and timer based wakeup
latency from idle states
Latches onto the test-cpuidle_latency kernel module using the debugfs
interface to send IPIs or schedule a timer based event, which in-turn
populates the debugfs with the latency measurements.
Currently for the IPI and timer tests; first disable all idle states
and then test for latency measurements incrementally enabling each state
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
---
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/cpuidle/Makefile | 6 +
tools/testing/selftests/cpuidle/cpuidle.sh | 257 +++++++++++++++++++++
tools/testing/selftests/cpuidle/settings | 1 +
4 files changed, 265 insertions(+)
create mode 100644 tools/testing/selftests/cpuidle/Makefile
create mode 100755 tools/testing/selftests/cpuidle/cpuidle.sh
create mode 100644 tools/testing/selftests/cpuidle/settings
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 1195bd85af38..ab6cf51f3518 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -7,6 +7,7 @@ TARGETS += capabilities
TARGETS += cgroup
TARGETS += clone3
TARGETS += cpufreq
+TARGETS += cpuidle
TARGETS += cpu-hotplug
TARGETS += drivers/dma-buf
TARGETS += efivarfs
diff --git a/tools/testing/selftests/cpuidle/Makefile b/tools/testing/selftests/cpuidle/Makefile
new file mode 100644
index 000000000000..72fd5d2e974d
--- /dev/null
+++ b/tools/testing/selftests/cpuidle/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+all:
+
+TEST_PROGS := cpuidle.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/cpuidle/cpuidle.sh b/tools/testing/selftests/cpuidle/cpuidle.sh
new file mode 100755
index 000000000000..5c313a3abb0c
--- /dev/null
+++ b/tools/testing/selftests/cpuidle/cpuidle.sh
@@ -0,0 +1,257 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+LOG=cpuidle.log
+MODULE=/lib/modules/$(uname -r)/kernel/drivers/cpuidle/test-cpuidle_latency.ko
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+helpme()
+{
+ printf "Usage: $0 [-h] [-todg args]
+ [-h <help>]
+ [-m <location of the module>]
+ [-o <location of the output>]
+ \n"
+ exit 2
+}
+
+parse_arguments()
+{
+ while getopts ht:m:o: arg
+ do
+ case $arg in
+ h) # --help
+ helpme
+ ;;
+ m) # --mod-file
+ MODULE=$OPTARG
+ ;;
+ o) # output log files
+ LOG=$OPTARG
+ ;;
+ \?)
+ helpme
+ ;;
+ esac
+ done
+}
+
+ins_mod()
+{
+ if [ ! -f "$MODULE" ]; then
+ printf "$MODULE module does not exist. Exitting\n"
+ exit $ksft_skip
+ fi
+ printf "Inserting $MODULE module\n\n"
+ insmod $MODULE
+ if [ $? != 0 ]; then
+ printf "Insmod $MODULE failed\n"
+ exit $ksft_skip
+ fi
+}
+
+compute_average()
+{
+ arr=("$@")
+ sum=0
+ size=${#arr[@]}
+ for i in "${arr[@]}"
+ do
+ sum=$((sum + i))
+ done
+ avg=$((sum/size))
+}
+
+# Disable all stop states
+disable_idle()
+{
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ for ((state=0; state<NUM_STATES; state++))
+ do
+ echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable
+ done
+ done
+}
+
+# Perform operation on each CPU for the given state
+# $1 - Operation: enable (0) / disable (1)
+# $2 - State to enable
+op_state()
+{
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ echo $1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$2/disable
+ done
+}
+
+# Extract latency in microseconds and convert to nanoseconds
+extract_latency()
+{
+ for ((state=0; state<NUM_STATES; state++))
+ do
+ latency=$(($(cat /sys/devices/system/cpu/cpu0/cpuidle/state$state/latency) * 1000))
+ latency_arr+=($latency)
+ done
+}
+
+# Run the IPI test
+# $1 run for baseline - busy cpu or regular environment
+# $2 destination cpu
+ipi_test_once()
+{
+ dest_cpu=$2
+ if [ "$1" = "baseline" ]; then
+ # Keep the CPU busy
+ taskset -c $dest_cpu cat /dev/random > /dev/null &
+ task_pid=$!
+ # Wait for the workload to achieve 100% CPU usage
+ sleep 1
+ fi
+ taskset 0x1 echo $dest_cpu > /sys/kernel/debug/latency_test/ipi_cpu_dest
+ ipi_latency=$(cat /sys/kernel/debug/latency_test/ipi_latency_ns)
+ src_cpu=$(cat /sys/kernel/debug/latency_test/ipi_cpu_src)
+ if [ "$1" = "baseline" ]; then
+ kill $task_pid
+ wait $task_pid 2>/dev/null
+ fi
+}
+
+# Incrementally Enable idle states one by one and compute the latency
+run_ipi_tests()
+{
+ extract_latency
+ disable_idle
+ declare -a avg_arr
+ echo -e "--IPI Latency Test---" >> $LOG
+
+ echo -e "--Baseline IPI Latency measurement: CPU Busy--" >> $LOG
+ printf "%s %10s %12s\n" "SRC_CPU" "DEST_CPU" "IPI_Latency(ns)" >> $LOG
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ ipi_test_once "baseline" $cpu
+ printf "%-3s %10s %12s\n" $src_cpu $cpu $ipi_latency >> $LOG
+ avg_arr+=($ipi_latency)
+ done
+ compute_average "${avg_arr[@]}"
+ echo -e "Baseline Average IPI latency(ns): $avg" >> $LOG
+
+ for ((state=0; state<NUM_STATES; state++))
+ do
+ unset avg_arr
+ echo -e "---Enabling state: $state---" >> $LOG
+ op_state 0 $state
+ printf "%s %10s %12s\n" "SRC_CPU" "DEST_CPU" "IPI_Latency(ns)" >> $LOG
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ # Running IPI test and logging results
+ sleep 1
+ ipi_test_once "test" $cpu
+ printf "%-3s %10s %12s\n" $src_cpu $cpu $ipi_latency >> $LOG
+ avg_arr+=($ipi_latency)
+ done
+ compute_average "${avg_arr[@]}"
+ echo -e "Expected IPI latency(ns): ${latency_arr[$state]}" >> $LOG
+ echo -e "Observed Average IPI latency(ns): $avg" >> $LOG
+ op_state 1 $state
+ done
+}
+
+# Extract the residency in microseconds and convert to nanoseconds.
+# Add 100 ns so that the timer stays for a little longer than the residency
+extract_residency()
+{
+ for ((state=0; state<NUM_STATES; state++))
+ do
+ residency=$(($(cat /sys/devices/system/cpu/cpu0/cpuidle/state$state/residency) * 1000 + 200))
+ residency_arr+=($residency)
+ done
+}
+
+# Run the Timeout test
+# $1 run for baseline - busy cpu or regular environment
+# $2 destination cpu
+# $3 timeout
+timeout_test_once()
+{
+ dest_cpu=$2
+ if [ "$1" = "baseline" ]; then
+ # Keep the CPU busy
+ taskset -c $dest_cpu cat /dev/random > /dev/null &
+ task_pid=$!
+ # Wait for the workload to achieve 100% CPU usage
+ sleep 1
+ fi
+ taskset -c $dest_cpu echo $3 > /sys/kernel/debug/latency_test/timeout_expected_ns
+ # Wait for the result to populate
+ sleep 0.1
+ timeout_diff=$(cat /sys/kernel/debug/latency_test/timeout_diff_ns)
+ src_cpu=$(cat /sys/kernel/debug/latency_test/timeout_cpu_src)
+ if [ "$1" = "baseline" ]; then
+ kill $task_pid
+ wait $task_pid 2>/dev/null
+ fi
+}
+
+run_timeout_tests()
+{
+ extract_residency
+ disable_idle
+ declare -a avg_arr
+ echo -e "\n--Timeout Latency Test--" >> $LOG
+
+ echo -e "--Baseline Timeout Latency measurement: CPU Busy--" >> $LOG
+ printf "%s %10s %10s\n" "Wakeup_src" "Baseline_delay(ns)">> $LOG
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ timeout_test_once "baseline" $cpu ${residency_arr[0]}
+ printf "%-3s %13s\n" $src_cpu $timeout_diff >> $LOG
+ avg_arr+=($timeout_diff)
+ done
+ compute_average "${avg_arr[@]}"
+ echo -e "Baseline Average timeout diff(ns): $avg" >> $LOG
+
+ for ((state=0; state<NUM_STATES; state++))
+ do
+ echo -e "---Enabling state: $state---" >> $LOG
+ op_state 0 $state
+ printf "%s %10s %10s\n" "Wakeup_src" "Baseline_delay(ns)" "Delay(ns)" >> $LOG
+ unset avg_arr
+ for ((cpu=0; cpu<NUM_CPUS; cpu++))
+ do
+ timeout_test_once "test" $cpu ${residency_arr[$state]}
+ printf "%-3s %13s %18s\n" $src_cpu $baseline_timeout_diff $timeout_diff >> $LOG
+ avg_arr+=($timeout_diff)
+ done
+ compute_average "${avg_arr[@]}"
+ echo -e "Expected timeout(ns): ${residency_arr[$state]}" >> $LOG
+ echo -e "Observed Average timeout diff(ns): $avg" >> $LOG
+ op_state 1 $state
+ done
+}
+
+declare -a residency_arr
+declare -a latency_arr
+
+# Parse arguments
+parse_arguments $@
+
+rm -f $LOG
+touch $LOG
+NUM_CPUS=$(nproc --all)
+NUM_STATES=$(ls -1 /sys/devices/system/cpu/cpu0/cpuidle/ | wc -l)
+
+# Insert the module
+ins_mod $MODULE
+
+printf "Started IPI latency tests\n"
+run_ipi_tests
+
+printf "Started Timer latency tests\n"
+run_timeout_tests
+
+printf "Removing $MODULE module\n"
+printf "Output logged at: $LOG\n"
+rmmod $MODULE
diff --git a/tools/testing/selftests/cpuidle/settings b/tools/testing/selftests/cpuidle/settings
new file mode 100644
index 000000000000..e7b9417537fb
--- /dev/null
+++ b/tools/testing/selftests/cpuidle/settings
@@ -0,0 +1 @@
+timeout=0
--
2.25.4
^ permalink raw reply related
* Re: ASMedia USB 3.x host controllers triggering EEH on POWER9
From: Forest Crossman @ 2020-07-17 10:10 UTC (permalink / raw)
To: Oliver O'Halloran; +Cc: linux-pci, linux-usb, linuxppc-dev
In-Reply-To: <CAOSf1CEOu5jX6KXKWiConBf=TDwF3qdASMxtfDjqSR6vOKN4XA@mail.gmail.com>
> In the future you can use this script to automate some of the tedium
> of parsing the eeh dumps:
> https://patchwork.ozlabs.org/project/skiboot/patch/20200717044243.1195833-1-oohall@gmail.com/
Ah, nice, thanks for showing me this! I had written my own parser that
just dumped a few register names and what bits were set in each, but
your script seems much more feature-complete.
> Anyway, for background the way PHB3 and PHB4 handle incoming DMAs goes
> as follows:
>
> 1. Map the 16bit <bus><devfn> number to an IOMMU context, we call
> those PEs. PE means "partitionable endpoint", but for the purpose of
> processing DMAs you can ignore that and just treat it as an IOMMU
> context ID.
> 2. Use the PE number and some of the upper bits of the DMA address to
> form the index into the Translation Validation Table.
> 3. Use the table entry to validate the DMA address is within bounds
> and whether it should be translated by the IOMMU or used as-is.
>
> If the table entry says the DMA needs to be translated by the IOMMU we'll also:
> 4. Walk the IOMMU table to get the relevant IOMMU table entry.
> 5. Validate the device has permission to read/write to that address.
>
> The "TVT Address Range Error" you're seeing means that the bounds
> checks done in 3) is failing. OPAL configures the PHB so there's two
> TVT entries (TVEs for short) assigned to each PE. Bit 59 of the DMA
> address is used to select which TVE to use. We typically configure
> TVE#0 to map 0x0...0x8000_0000 so there's a 2GB 32bit DMA window.
> TVE#1 is configured for no-translate (bypass) mode so you can convert
> from a system physical address to a DMA address by ORing in bit 59.
Thanks for the in-depth explanation, I find these low-level details
really fascinating.
> From word 2 of the PEST entry the faulting DMA address is:
> 0x0000203974c00000. That address is interesting since it looks a lot
> like a memory address on the 2nd chip, but it doesn't have bit 59 set
> so TVE#0 is used to validate it. Obviously that address is above 2GB
> so we get the error.
Ah, I see. Do you know if the information on the PEST registers is
documented publicly somewhere? I tried searching for what those
registers meant in the PHB4 spec but it basically just said, "the PEST
registers contain PEST data," which isn't particularly helpful.
> What's probably happening is that the ASmedia controller doesn't
> actually implement all 64 address bits and truncates the upper bits of
> the DMA address. Doing that is a blatant violation of the PCIe (and
> probably the xHCI) spec, but it's also pretty common since "it works
> on x86." Something to try would be booting with the iommu=nobypass in
> the kernel command line. That'll disable TVE#1 and force all DMAs to
> go through TVE#0.
Thanks, iommu=nobypass fixed it! Plugging in one or more USB devices
no longer triggers any EEH errors.
> Assuming the nobypass trick above works, what you really need to do is
> have the driver report that it can't address all 64bits by setting its
> DMA mask accordingly. For the xhci driver it looks like this is done
> in xhci_gen_setup(), there might be a quirks-style interface for
> working around bugs in specific controllers that you can use. Have a
> poke around and see what you can find :)
Yup, the xhci driver has a quirks system, and conveniently one of
those is XHCI_NO_64BIT_SUPPORT. After making a 3-line patch to
xhci-pci.c to add that quirk for this chip, the host controller is now
able to work without setting iommu=nobypass in the kernel arguments.
Thank you so much for your help! You've likely saved me several hours
of reading documentation, as well as several more hours of fiddling
around with the xhci driver. I'm almost disappointed the fix was so
simple, but the time savings alone more than makes up for it. I'll
submit the patch to the USB ML shortly.
Thanks again!
Forest
^ permalink raw reply
* Re: ASMedia USB 3.x host controllers triggering EEH on POWER9
From: Oliver O'Halloran @ 2020-07-17 10:43 UTC (permalink / raw)
To: Forest Crossman; +Cc: linux-pci, linux-usb, linuxppc-dev
In-Reply-To: <CAO3ALPwZPN1vdqHaFsuSpgj63o6Z69VUg0LngmCSnvESrO4kNg@mail.gmail.com>
On Fri, Jul 17, 2020 at 8:10 PM Forest Crossman <cyrozap@gmail.com> wrote:
>
> > From word 2 of the PEST entry the faulting DMA address is:
> > 0x0000203974c00000. That address is interesting since it looks a lot
> > like a memory address on the 2nd chip, but it doesn't have bit 59 set
> > so TVE#0 is used to validate it. Obviously that address is above 2GB
> > so we get the error.
>
> Ah, I see. Do you know if the information on the PEST registers is
> documented publicly somewhere? I tried searching for what those
> registers meant in the PHB4 spec but it basically just said, "the PEST
> registers contain PEST data," which isn't particularly helpful.
Most of it is in the IODA spec. See Sec 2.2.6 "Partitionable-Endpoint
State Table", the only part that isn't documented there is the top
bits of each word which are documented in the PHB spec for some
reason. For word one the top bit (PPCBIT(0)) means MMIO is frozen and
for word two (PPCBIT(64)) the top bit indicates DMA is frozen.
> > What's probably happening is that the ASmedia controller doesn't
> > actually implement all 64 address bits and truncates the upper bits of
> > the DMA address. Doing that is a blatant violation of the PCIe (and
> > probably the xHCI) spec, but it's also pretty common since "it works
> > on x86." Something to try would be booting with the iommu=nobypass in
> > the kernel command line. That'll disable TVE#1 and force all DMAs to
> > go through TVE#0.
>
> Thanks, iommu=nobypass fixed it! Plugging in one or more USB devices
> no longer triggers any EEH errors.
>
> > Assuming the nobypass trick above works, what you really need to do is
> > have the driver report that it can't address all 64bits by setting its
> > DMA mask accordingly. For the xhci driver it looks like this is done
> > in xhci_gen_setup(), there might be a quirks-style interface for
> > working around bugs in specific controllers that you can use. Have a
> > poke around and see what you can find :)
>
> Yup, the xhci driver has a quirks system, and conveniently one of
> those is XHCI_NO_64BIT_SUPPORT. After making a 3-line patch to
> xhci-pci.c to add that quirk for this chip, the host controller is now
> able to work without setting iommu=nobypass in the kernel arguments.
Cool
> Thank you so much for your help! You've likely saved me several hours
> of reading documentation, as well as several more hours of fiddling
> around with the xhci driver.
> I'm almost disappointed the fix was so
> simple, but the time savings alone more than makes up for it. I'll
> submit the patch to the USB ML shortly.
It might be only three lines, but it doesn't mean it's trivial. Most
bugs like that require a lot of context to understand, let alone fix.
Thanks for looking into it!
Oliver
^ permalink raw reply
* Re: [PATCH 0/4] ASoC: fsl_asrc: allow selecting arbitrary clocks
From: Arnaud Ferraris @ 2020-07-17 11:16 UTC (permalink / raw)
To: Nicolin Chen
Cc: devicetree, alsa-devel, linuxppc-dev, Timur Tabi, Xiubo Li,
linux-kernel, Takashi Iwai, Liam Girdwood, Rob Herring,
Jaroslav Kysela, Mark Brown, kernel, Fabio Estevam
In-Reply-To: <20200702184226.GA23935@Asurada-Nvidia>
Hi Nic,
Le 02/07/2020 à 20:42, Nicolin Chen a écrit :
> Hi Arnaud,
>
> On Thu, Jul 02, 2020 at 04:22:31PM +0200, Arnaud Ferraris wrote:
>> The current ASRC driver hardcodes the input and output clocks used for
>> sample rate conversions. In order to allow greater flexibility and to
>> cover more use cases, it would be preferable to select the clocks using
>> device-tree properties.
>
> We recent just merged a new change that auto-selecting internal
> clocks based on sample rates as the first option -- ideal ratio
> mode is the fallback mode now. Please refer to:
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=next-20200702&id=d0250cf4f2abfbea64ed247230f08f5ae23979f0
While working on fixing the automatic clock selection (see my v3), I
came across another potential issue, which would be better explained
with an example:
- Input has sample rate 8kHz and uses clock SSI1 with rate 512kHz
- Output has sample rate 16kHz and uses clock SSI2 with rate 1024kHz
Let's say my v3 patch is merged, then the selected input clock will be
SSI1, while the selected output clock will be SSI2. In that case, it's
all good, as the driver will calculate the dividers right.
Now, suppose a similar board has the input wired to SSI2 and output to
SSI1, meaning we're now in the following case:
- Input has sample rate 8kHz and uses clock SSI2 with rate 512kHz
- Output has sample rate 16kHz and uses clock SSI1 with rate 1024kHz
(the same result is achieved during capture with the initial example
setup, as input and output properties are then swapped)
In that case, the selected clocks will still be SSI1 for input (just
because it appears first in the clock table), and SSI2 for output,
meaning the calculated dividers will be:
- input: 512 / 16 => 32 (should be 64)
- output: 1024 / 8 => 128 (should be 64 here too)
---
I can't see how the clock selection algorithm could be made smart enough
to cover cases such as this one, as it would need to be aware of the
exact relationship between the sample rate and the clock rate (my
example demonstrates a case where the "sample rate to clock rate"
multiplier is identical for both input and output, but this can't be
assumed to be always the case).
Therefore, I still believe being able to force clock selection using
optional DT properties would make sense, while still using the
auto-selection by default.
Regards,
Arnaud
>
> Having a quick review at your changes, I think the DT part may
> not be necessary as it's more likely a software configuration.
> I personally like the new auto-selecting solution more.
>
>> This series also fix register configuration and clock assignment so
>> conversion can be conducted effectively in both directions with a good
>> quality.
>
> If there's any further change that you feel you can improve on
> the top of mentioned change after rebasing, I'd like to review.
>
> Thanks
> Nic
>
^ permalink raw reply
* [PATCH -next] powerpc: Remove unneeded inline functions
From: YueHaibing @ 2020-07-17 11:27 UTC (permalink / raw)
To: mpe, benh, paulus, haren, dave.hansen, npiggin
Cc: YueHaibing, linuxppc-dev, linux-kernel
In-Reply-To: <20200715031939.31968-1-yuehaibing@huawei.com>
Both of those functions are only called from 64-bit only code, so the
stubs should not be needed at all.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
arch/powerpc/include/asm/mmu_context.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 1a474f6b1992..7f3658a97384 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -218,8 +218,6 @@ static inline void inc_mm_active_cpus(struct mm_struct *mm) { }
static inline void dec_mm_active_cpus(struct mm_struct *mm) { }
static inline void mm_context_add_copro(struct mm_struct *mm) { }
static inline void mm_context_remove_copro(struct mm_struct *mm) { }
-static inline void mm_context_add_vas_windows(struct mm_struct *mm) { }
-static inline void mm_context_remove_vas_windows(struct mm_struct *mm) { }
#endif
--
2.17.1
^ permalink raw reply related
* Re: [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Mathieu Desnoyers @ 2020-07-17 13:39 UTC (permalink / raw)
To: Alan Stern
Cc: linux-arch, paulmck, Arnd Bergmann, Peter Zijlstra, x86,
linux-kernel, Nicholas Piggin, linux-mm, Andy Lutomirski,
linuxppc-dev
In-Reply-To: <20200716212416.GA1126458@rowland.harvard.edu>
----- On Jul 16, 2020, at 5:24 PM, Alan Stern stern@rowland.harvard.edu wrote:
> On Thu, Jul 16, 2020 at 02:58:41PM -0400, Mathieu Desnoyers wrote:
>> ----- On Jul 16, 2020, at 12:03 PM, Mathieu Desnoyers
>> mathieu.desnoyers@efficios.com wrote:
>>
>> > ----- On Jul 16, 2020, at 11:46 AM, Mathieu Desnoyers
>> > mathieu.desnoyers@efficios.com wrote:
>> >
>> >> ----- On Jul 16, 2020, at 12:42 AM, Nicholas Piggin npiggin@gmail.com wrote:
>> >>> I should be more complete here, especially since I was complaining
>> >>> about unclear barrier comment :)
>> >>>
>> >>>
>> >>> CPU0 CPU1
>> >>> a. user stuff 1. user stuff
>> >>> b. membarrier() 2. enter kernel
>> >>> c. smp_mb() 3. smp_mb__after_spinlock(); // in __schedule
>> >>> d. read rq->curr 4. rq->curr switched to kthread
>> >>> e. is kthread, skip IPI 5. switch_to kthread
>> >>> f. return to user 6. rq->curr switched to user thread
>> >>> g. user stuff 7. switch_to user thread
>> >>> 8. exit kernel
>> >>> 9. more user stuff
>> >>>
>> >>> What you're really ordering is a, g vs 1, 9 right?
>> >>>
>> >>> In other words, 9 must see a if it sees g, g must see 1 if it saw 9,
>> >>> etc.
>> >>>
>> >>> Userspace does not care where the barriers are exactly or what kernel
>> >>> memory accesses might be being ordered by them, so long as there is a
>> >>> mb somewhere between a and g, and 1 and 9. Right?
>> >>
>> >> This is correct.
>> >
>> > Actually, sorry, the above is not quite right. It's been a while
>> > since I looked into the details of membarrier.
>> >
>> > The smp_mb() at the beginning of membarrier() needs to be paired with a
>> > smp_mb() _after_ rq->curr is switched back to the user thread, so the
>> > memory barrier is between store to rq->curr and following user-space
>> > accesses.
>> >
>> > The smp_mb() at the end of membarrier() needs to be paired with the
>> > smp_mb__after_spinlock() at the beginning of schedule, which is
>> > between accesses to userspace memory and switching rq->curr to kthread.
>> >
>> > As to *why* this ordering is needed, I'd have to dig through additional
>> > scenarios from https://lwn.net/Articles/573436/. Or maybe Paul remembers ?
>>
>> Thinking further about this, I'm beginning to consider that maybe we have been
>> overly cautious by requiring memory barriers before and after store to rq->curr.
>>
>> If CPU0 observes a CPU1's rq->curr->mm which differs from its own process
>> (current)
>> while running the membarrier system call, it necessarily means that CPU1 had
>> to issue smp_mb__after_spinlock when entering the scheduler, between any
>> user-space
>> loads/stores and update of rq->curr.
>>
>> Requiring a memory barrier between update of rq->curr (back to current process's
>> thread) and following user-space memory accesses does not seem to guarantee
>> anything more than what the initial barrier at the beginning of __schedule
>> already
>> provides, because the guarantees are only about accesses to user-space memory.
>>
>> Therefore, with the memory barrier at the beginning of __schedule, just
>> observing that
>> CPU1's rq->curr differs from current should guarantee that a memory barrier was
>> issued
>> between any sequentially consistent instructions belonging to the current
>> process on
>> CPU1.
>>
>> Or am I missing/misremembering an important point here ?
>
> Is it correct to say that the switch_to operations in 5 and 7 include
> memory barriers? If they do, then skipping the IPI should be okay.
>
> The reason is as follows: The guarantee you need to enforce is that
> anything written by CPU0 before the membarrier() will be visible to CPU1
> after it returns to user mode. Let's say that a writes to X and 9
> reads from X.
>
> Then we have an instance of the Store Buffer pattern:
>
> CPU0 CPU1
> a. Write X 6. Write rq->curr for user thread
> c. smp_mb() 7. switch_to memory barrier
> d. Read rq->curr 9. Read X
>
> In this pattern, the memory barriers make it impossible for both reads
> to miss their corresponding writes. Since d does fail to read 6 (it
> sees the earlier value stored by 4), 9 must read a.
>
> The other guarantee you need is that g on CPU0 will observe anything
> written by CPU1 in 1. This is easier to see, using the fact that 3 is a
> memory barrier and d reads from 4.
Right, and Nick's reply involving pairs of loads/stores on each side
clarifies the situation even further.
Thanks,
Mathieu
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply
* Re: [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Mathieu Desnoyers @ 2020-07-17 13:42 UTC (permalink / raw)
To: Nicholas Piggin
Cc: linux-arch, Arnd Bergmann, Peter Zijlstra, x86, linux-kernel,
Andy Lutomirski, linux-mm, Andy Lutomirski, linuxppc-dev
In-Reply-To: <1594906688.ikv6r4gznx.astroid@bobo.none>
----- On Jul 16, 2020, at 7:26 PM, Nicholas Piggin npiggin@gmail.com wrote:
[...]
>
> membarrier does replace barrier instructions on remote CPUs, which do
> order accesses performed by the kernel on the user address space. So
> membarrier should too I guess.
>
> Normal process context accesses like read(2) will do so because they
> don't get filtered out from IPIs, but kernel threads using the mm may
> not.
But it should not be an issue, because membarrier's ordering is only with respect
to submit and completion of io_uring requests, which are performed through
system calls from the context of user-space threads, which are called from the
right mm.
Thanks,
Mathieu
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply
* [v3 00/15] powerpc/perf: Add support for power10 PMU Hardware
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
The patch series adds support for power10 PMU hardware.
Patches 1..3 are the clean up patches which refactors the way how
PMU SPR's are stored in core-book3s and in KVM book3s, as well as update
data type for PMU cache_events.
Patches 12 and 13 adds base support for perf extended register
capability in powerpc. Support for extended regs in power10 is
covered in patches 14,15
Other patches includes main changes to support for power10 PMU.
Anju T Sudhakar (2):
powerpc/perf: Add support for outputting extended regs in perf
intr_regs
tools/perf: Add perf tools support for extended register capability in
powerpc
Athira Rajeev (10):
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR
registers
KVM: PPC: Book3S HV: Cleanup updates for kvm vcpu MMCR
powerpc/perf: Update Power PMU cache_events to u64 type
KVM: PPC: Book3S HV: Save/restore new PMU registers
powerpc/perf: power10 Performance Monitoring support
powerpc/perf: Ignore the BHRB kernel address filtering for P10
powerpc/perf: Add Power10 BHRB filter support for
PERF_SAMPLE_BRANCH_IND_CALL/COND
powerpc/perf: BHRB control to disable BHRB logic when not used
powerpc/perf: Add extended regs support for power10 platform
tools/perf: Add perf tools support for extended regs in power10
Madhavan Srinivasan (3):
powerpc/perf: Add support for ISA3.1 PMU SPRs
powerpc/xmon: Add PowerISA v3.1 PMU SPRs
powerpc/perf: Add power10_feat to dt_cpu_ftrs
---
Changes from v2 -> v3
- Addressed review comments from Michael Neuling,
Michael Ellerman, Gautham Shenoy and Paul Mackerras
Changes from v1 -> v2
- Added support for extended regs in powerpc
for power9/power10 platform ( patches 12 to 15)
- Addressed change/removal of some event codes
in the PMU driver
---
Documentation/virt/kvm/api.rst | 3 +
arch/powerpc/include/asm/kvm_book3s_asm.h | 2 +-
arch/powerpc/include/asm/kvm_host.h | 6 +-
arch/powerpc/include/asm/perf_event_server.h | 22 +-
arch/powerpc/include/asm/processor.h | 4 +
arch/powerpc/include/asm/reg.h | 9 +
arch/powerpc/include/uapi/asm/kvm.h | 9 +-
arch/powerpc/include/uapi/asm/perf_regs.h | 20 +-
arch/powerpc/kernel/asm-offsets.c | 5 +
arch/powerpc/kernel/cpu_setup_power.S | 8 +
arch/powerpc/kernel/dt_cpu_ftrs.c | 26 ++
arch/powerpc/kernel/sysfs.c | 8 +
arch/powerpc/kvm/book3s_hv.c | 38 ++-
arch/powerpc/kvm/book3s_hv_interrupts.S | 8 +
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 36 +-
arch/powerpc/perf/Makefile | 2 +-
arch/powerpc/perf/core-book3s.c | 108 ++++--
arch/powerpc/perf/generic-compat-pmu.c | 2 +-
arch/powerpc/perf/internal.h | 1 +
arch/powerpc/perf/isa207-common.c | 91 +++--
arch/powerpc/perf/isa207-common.h | 37 ++-
arch/powerpc/perf/mpc7450-pmu.c | 23 +-
arch/powerpc/perf/perf_regs.c | 44 ++-
arch/powerpc/perf/power10-events-list.h | 70 ++++
arch/powerpc/perf/power10-pmu.c | 425 ++++++++++++++++++++++++
arch/powerpc/perf/power5+-pmu.c | 19 +-
arch/powerpc/perf/power5-pmu.c | 19 +-
arch/powerpc/perf/power6-pmu.c | 18 +-
arch/powerpc/perf/power7-pmu.c | 19 +-
arch/powerpc/perf/power8-pmu.c | 2 +-
arch/powerpc/perf/power9-pmu.c | 8 +-
arch/powerpc/perf/ppc970-pmu.c | 26 +-
arch/powerpc/platforms/powernv/idle.c | 22 +-
arch/powerpc/xmon/xmon.c | 13 +
tools/arch/powerpc/include/uapi/asm/kvm.h | 9 +-
tools/arch/powerpc/include/uapi/asm/perf_regs.h | 20 +-
tools/perf/arch/powerpc/include/perf_regs.h | 8 +-
tools/perf/arch/powerpc/util/header.c | 9 +-
tools/perf/arch/powerpc/util/perf_regs.c | 55 +++
tools/perf/arch/powerpc/util/utils_header.h | 15 +
40 files changed, 1117 insertions(+), 152 deletions(-)
create mode 100644 arch/powerpc/perf/power10-events-list.h
create mode 100644 arch/powerpc/perf/power10-pmu.c
create mode 100644 tools/perf/arch/powerpc/util/utils_header.h
--
1.8.3.1
^ permalink raw reply
* [v3 01/15] powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
core-book3s currently uses array to store the MMCR registers as part
of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct`
to store mmcr regs instead of array. This will make code easier to read
and reduces chance of any subtle bug that may come in the future, say
when new registers are added. Patch updates all relevant code that was
using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`.
This includes the PMU driver code for supported platforms (power5
to power9) and ISA macros for counter support functions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 10 ++++--
arch/powerpc/perf/core-book3s.c | 53 +++++++++++++---------------
arch/powerpc/perf/isa207-common.c | 20 +++++------
arch/powerpc/perf/isa207-common.h | 4 +--
arch/powerpc/perf/mpc7450-pmu.c | 21 +++++++----
arch/powerpc/perf/power5+-pmu.c | 17 ++++-----
arch/powerpc/perf/power5-pmu.c | 17 ++++-----
arch/powerpc/perf/power6-pmu.c | 16 ++++-----
arch/powerpc/perf/power7-pmu.c | 17 ++++-----
arch/powerpc/perf/ppc970-pmu.c | 24 ++++++-------
10 files changed, 105 insertions(+), 94 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 3e9703f..f9a3668 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -17,6 +17,12 @@
struct perf_event;
+struct mmcr_regs {
+ unsigned long mmcr0;
+ unsigned long mmcr1;
+ unsigned long mmcr2;
+ unsigned long mmcra;
+};
/*
* This struct provides the constants and functions needed to
* describe the PMU on a particular POWER-family CPU.
@@ -28,7 +34,7 @@ struct power_pmu {
unsigned long add_fields;
unsigned long test_adder;
int (*compute_mmcr)(u64 events[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[],
+ unsigned int hwc[], struct mmcr_regs *mmcr,
struct perf_event *pevents[]);
int (*get_constraint)(u64 event_id, unsigned long *mskp,
unsigned long *valp);
@@ -41,7 +47,7 @@ struct power_pmu {
unsigned long group_constraint_val;
u64 (*bhrb_filter_map)(u64 branch_sample_type);
void (*config_bhrb)(u64 pmu_bhrb_filter);
- void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+ void (*disable_pmc)(unsigned int pmc, struct mmcr_regs *mmcr);
int (*limited_pmc_event)(u64 event_id);
u32 flags;
const struct attribute_group **attr_groups;
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index cd6a742..18b1b6a 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -37,12 +37,7 @@ struct cpu_hw_events {
struct perf_event *event[MAX_HWEVENTS];
u64 events[MAX_HWEVENTS];
unsigned int flags[MAX_HWEVENTS];
- /*
- * The order of the MMCR array is:
- * - 64-bit, MMCR0, MMCR1, MMCRA, MMCR2
- * - 32-bit, MMCR0, MMCR1, MMCR2
- */
- unsigned long mmcr[4];
+ struct mmcr_regs mmcr;
struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS];
u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS];
u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
@@ -121,7 +116,7 @@ static void ebb_event_add(struct perf_event *event) { }
static void ebb_switch_out(unsigned long mmcr0) { }
static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
{
- return cpuhw->mmcr[0];
+ return cpuhw->mmcr.mmcr0;
}
static inline void power_pmu_bhrb_enable(struct perf_event *event) {}
@@ -590,7 +585,7 @@ static void ebb_switch_out(unsigned long mmcr0)
static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
{
- unsigned long mmcr0 = cpuhw->mmcr[0];
+ unsigned long mmcr0 = cpuhw->mmcr.mmcr0;
if (!ebb)
goto out;
@@ -624,7 +619,7 @@ static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
* unfreeze counters, it should not set exclude_xxx in its events and
* instead manage the MMCR2 entirely by itself.
*/
- mtspr(SPRN_MMCR2, cpuhw->mmcr[3] | current->thread.mmcr2);
+ mtspr(SPRN_MMCR2, cpuhw->mmcr.mmcr2 | current->thread.mmcr2);
out:
return mmcr0;
}
@@ -1232,9 +1227,9 @@ static void power_pmu_disable(struct pmu *pmu)
/*
* Disable instruction sampling if it was enabled
*/
- if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+ if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) {
mtspr(SPRN_MMCRA,
- cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+ cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
mb();
isync();
}
@@ -1308,18 +1303,18 @@ static void power_pmu_enable(struct pmu *pmu)
* (possibly updated for removal of events).
*/
if (!cpuhw->n_added) {
- mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
- mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+ mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
+ mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
goto out_enable;
}
/*
* Clear all MMCR settings and recompute them for the new set of events.
*/
- memset(cpuhw->mmcr, 0, sizeof(cpuhw->mmcr));
+ memset(&cpuhw->mmcr, 0, sizeof(cpuhw->mmcr));
if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index,
- cpuhw->mmcr, cpuhw->event)) {
+ &cpuhw->mmcr, cpuhw->event)) {
/* shouldn't ever get here */
printk(KERN_ERR "oops compute_mmcr failed\n");
goto out;
@@ -1333,11 +1328,11 @@ static void power_pmu_enable(struct pmu *pmu)
*/
event = cpuhw->event[0];
if (event->attr.exclude_user)
- cpuhw->mmcr[0] |= MMCR0_FCP;
+ cpuhw->mmcr.mmcr0 |= MMCR0_FCP;
if (event->attr.exclude_kernel)
- cpuhw->mmcr[0] |= freeze_events_kernel;
+ cpuhw->mmcr.mmcr0 |= freeze_events_kernel;
if (event->attr.exclude_hv)
- cpuhw->mmcr[0] |= MMCR0_FCHV;
+ cpuhw->mmcr.mmcr0 |= MMCR0_FCHV;
}
/*
@@ -1346,12 +1341,12 @@ static void power_pmu_enable(struct pmu *pmu)
* Then unfreeze the events.
*/
ppc_set_pmu_inuse(1);
- mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
- mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
- mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
+ mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
+ mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
+ mtspr(SPRN_MMCR0, (cpuhw->mmcr.mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
| MMCR0_FC);
if (ppmu->flags & PPMU_ARCH_207S)
- mtspr(SPRN_MMCR2, cpuhw->mmcr[3]);
+ mtspr(SPRN_MMCR2, cpuhw->mmcr.mmcr2);
/*
* Read off any pre-existing events that need to move
@@ -1402,7 +1397,7 @@ static void power_pmu_enable(struct pmu *pmu)
perf_event_update_userpage(event);
}
cpuhw->n_limited = n_lim;
- cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
+ cpuhw->mmcr.mmcr0 |= MMCR0_PMXE | MMCR0_FCECE;
out_enable:
pmao_restore_workaround(ebb);
@@ -1418,9 +1413,9 @@ static void power_pmu_enable(struct pmu *pmu)
/*
* Enable instruction sampling if necessary
*/
- if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+ if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) {
mb();
- mtspr(SPRN_MMCRA, cpuhw->mmcr[2]);
+ mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra);
}
out:
@@ -1550,7 +1545,7 @@ static void power_pmu_del(struct perf_event *event, int ef_flags)
cpuhw->flags[i-1] = cpuhw->flags[i];
}
--cpuhw->n_events;
- ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
+ ppmu->disable_pmc(event->hw.idx - 1, &cpuhw->mmcr);
if (event->hw.idx) {
write_pmc(event->hw.idx, 0);
event->hw.idx = 0;
@@ -1571,7 +1566,7 @@ static void power_pmu_del(struct perf_event *event, int ef_flags)
}
if (cpuhw->n_events == 0) {
/* disable exceptions if no events are running */
- cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE);
+ cpuhw->mmcr.mmcr0 &= ~(MMCR0_PMXE | MMCR0_FCECE);
}
if (has_branch_stack(event))
@@ -2240,7 +2235,7 @@ static void __perf_event_interrupt(struct pt_regs *regs)
* XXX might want to use MSR.PM to keep the events frozen until
* we get back out of this interrupt.
*/
- write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+ write_mmcr0(cpuhw, cpuhw->mmcr.mmcr0);
if (nmi)
nmi_exit();
@@ -2262,7 +2257,7 @@ static int power_pmu_prepare_cpu(unsigned int cpu)
if (ppmu) {
memset(cpuhw, 0, sizeof(*cpuhw));
- cpuhw->mmcr[0] = MMCR0_FC;
+ cpuhw->mmcr.mmcr0 = MMCR0_FC;
}
return 0;
}
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 4c86da5..2fe63f2 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -363,7 +363,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
}
int isa207_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[],
+ unsigned int hwc[], struct mmcr_regs *mmcr,
struct perf_event *pevents[])
{
unsigned long mmcra, mmcr1, mmcr2, unit, combine, psel, cache, val;
@@ -464,30 +464,30 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
}
/* Return MMCRx values */
- mmcr[0] = 0;
+ mmcr->mmcr0 = 0;
/* pmc_inuse is 1-based */
if (pmc_inuse & 2)
- mmcr[0] = MMCR0_PMC1CE;
+ mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0x7c)
- mmcr[0] |= MMCR0_PMCjCE;
+ mmcr->mmcr0 |= MMCR0_PMCjCE;
/* If we're not using PMC 5 or 6, freeze them */
if (!(pmc_inuse & 0x60))
- mmcr[0] |= MMCR0_FC56;
+ mmcr->mmcr0 |= MMCR0_FC56;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
- mmcr[3] = mmcr2;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
+ mmcr->mmcr2 = mmcr2;
return 0;
}
-void isa207_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+void isa207_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 3)
- mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1));
+ mmcr->mmcr1 &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1));
}
static int find_alternative(u64 event, const unsigned int ev_alt[][MAX_ALT], int size)
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index 63fd4f3..df968fd 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -217,9 +217,9 @@
int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp);
int isa207_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[],
+ unsigned int hwc[], struct mmcr_regs *mmcr,
struct perf_event *pevents[]);
-void isa207_disable_pmc(unsigned int pmc, unsigned long mmcr[]);
+void isa207_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr);
int isa207_get_alternatives(u64 event, u64 alt[], int size, unsigned int flags,
const unsigned int ev_alt[][MAX_ALT]);
void isa207_get_mem_data_src(union perf_mem_data_src *dsrc, u32 flags,
diff --git a/arch/powerpc/perf/mpc7450-pmu.c b/arch/powerpc/perf/mpc7450-pmu.c
index 4d5ef92..826de25 100644
--- a/arch/powerpc/perf/mpc7450-pmu.c
+++ b/arch/powerpc/perf/mpc7450-pmu.c
@@ -257,7 +257,7 @@ static int mpc7450_get_alternatives(u64 event, unsigned int flags, u64 alt[])
* Compute MMCR0/1/2 values for a set of events.
*/
static int mpc7450_compute_mmcr(u64 event[], int n_ev, unsigned int hwc[],
- unsigned long mmcr[],
+ struct mmcr_regs *mmcr,
struct perf_event *pevents[])
{
u8 event_index[N_CLASSES][N_COUNTER];
@@ -321,9 +321,16 @@ static int mpc7450_compute_mmcr(u64 event[], int n_ev, unsigned int hwc[],
mmcr0 |= MMCR0_PMCnCE;
/* Return MMCRx values */
- mmcr[0] = mmcr0;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcr2;
+ mmcr->mmcr0 = mmcr0;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcr2 = mmcr2;
+ /*
+ * 32-bit doesn't have an MMCRA and uses SPRN_MMCR2 to define
+ * SPRN_MMCRA. So assign mmcra of cpu_hw_events with `mmcr2`
+ * value to ensure that any write to this SPRN_MMCRA will
+ * use mmcr2 value.
+ */
+ mmcr->mmcra = mmcr2;
return 0;
}
@@ -331,12 +338,12 @@ static int mpc7450_compute_mmcr(u64 event[], int n_ev, unsigned int hwc[],
* Disable counting by a PMC.
* Note that the pmc argument is 0-based here, not 1-based.
*/
-static void mpc7450_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void mpc7450_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 1)
- mmcr[0] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
+ mmcr->mmcr0 &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
else
- mmcr[1] &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
+ mmcr->mmcr1 &= ~(pmcsel_mask[pmc] << pmcsel_shift[pmc]);
}
static int mpc7450_generic_events[] = {
diff --git a/arch/powerpc/perf/power5+-pmu.c b/arch/powerpc/perf/power5+-pmu.c
index f857454..5f0821e 100644
--- a/arch/powerpc/perf/power5+-pmu.c
+++ b/arch/powerpc/perf/power5+-pmu.c
@@ -448,7 +448,8 @@ static int power5p_marked_instr_event(u64 event)
}
static int power5p_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
+ unsigned int hwc[], struct mmcr_regs *mmcr,
+ struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = 0;
@@ -586,20 +587,20 @@ static int power5p_compute_mmcr(u64 event[], int n_ev,
}
/* Return MMCRx values */
- mmcr[0] = 0;
+ mmcr->mmcr0 = 0;
if (pmc_inuse & 1)
- mmcr[0] = MMCR0_PMC1CE;
+ mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0x3e)
- mmcr[0] |= MMCR0_PMCjCE;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
+ mmcr->mmcr0 |= MMCR0_PMCjCE;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
return 0;
}
-static void power5p_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void power5p_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 3)
- mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
+ mmcr->mmcr1 &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
}
static int power5p_generic_events[] = {
diff --git a/arch/powerpc/perf/power5-pmu.c b/arch/powerpc/perf/power5-pmu.c
index da52eca..426021d 100644
--- a/arch/powerpc/perf/power5-pmu.c
+++ b/arch/powerpc/perf/power5-pmu.c
@@ -379,7 +379,8 @@ static int power5_marked_instr_event(u64 event)
}
static int power5_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
+ unsigned int hwc[], struct mmcr_regs *mmcr,
+ struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
@@ -528,20 +529,20 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
}
/* Return MMCRx values */
- mmcr[0] = 0;
+ mmcr->mmcr0 = 0;
if (pmc_inuse & 1)
- mmcr[0] = MMCR0_PMC1CE;
+ mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0x3e)
- mmcr[0] |= MMCR0_PMCjCE;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
+ mmcr->mmcr0 |= MMCR0_PMCjCE;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
return 0;
}
-static void power5_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void power5_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 3)
- mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
+ mmcr->mmcr1 &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
}
static int power5_generic_events[] = {
diff --git a/arch/powerpc/perf/power6-pmu.c b/arch/powerpc/perf/power6-pmu.c
index 3929cac..e343a51 100644
--- a/arch/powerpc/perf/power6-pmu.c
+++ b/arch/powerpc/perf/power6-pmu.c
@@ -171,7 +171,7 @@ static int power6_marked_instr_event(u64 event)
* Assign PMC numbers and compute MMCR1 value for a set of events
*/
static int p6_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
+ unsigned int hwc[], struct mmcr_regs *mmcr, struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
@@ -243,13 +243,13 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
if (pmc < 4)
mmcr1 |= (unsigned long)psel << MMCR1_PMCSEL_SH(pmc);
}
- mmcr[0] = 0;
+ mmcr->mmcr0 = 0;
if (pmc_inuse & 1)
- mmcr[0] = MMCR0_PMC1CE;
+ mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0xe)
- mmcr[0] |= MMCR0_PMCjCE;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
+ mmcr->mmcr0 |= MMCR0_PMCjCE;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
return 0;
}
@@ -457,11 +457,11 @@ static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[])
return nalt;
}
-static void p6_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void p6_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
/* Set PMCxSEL to 0 to disable PMCx */
if (pmc <= 3)
- mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
+ mmcr->mmcr1 &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
}
static int power6_generic_events[] = {
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index a137813..3152336 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -242,7 +242,8 @@ static int power7_marked_instr_event(u64 event)
}
static int power7_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
+ unsigned int hwc[], struct mmcr_regs *mmcr,
+ struct perf_event *pevents[])
{
unsigned long mmcr1 = 0;
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
@@ -298,20 +299,20 @@ static int power7_compute_mmcr(u64 event[], int n_ev,
}
/* Return MMCRx values */
- mmcr[0] = 0;
+ mmcr->mmcr0 = 0;
if (pmc_inuse & 1)
- mmcr[0] = MMCR0_PMC1CE;
+ mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0x3e)
- mmcr[0] |= MMCR0_PMCjCE;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
+ mmcr->mmcr0 |= MMCR0_PMCjCE;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
return 0;
}
-static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void power7_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 3)
- mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
+ mmcr->mmcr1 &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
}
static int power7_generic_events[] = {
diff --git a/arch/powerpc/perf/ppc970-pmu.c b/arch/powerpc/perf/ppc970-pmu.c
index 4035d93..89a90ab 100644
--- a/arch/powerpc/perf/ppc970-pmu.c
+++ b/arch/powerpc/perf/ppc970-pmu.c
@@ -253,7 +253,8 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[])
}
static int p970_compute_mmcr(u64 event[], int n_ev,
- unsigned int hwc[], unsigned long mmcr[], struct perf_event *pevents[])
+ unsigned int hwc[], struct mmcr_regs *mmcr,
+ struct perf_event *pevents[])
{
unsigned long mmcr0 = 0, mmcr1 = 0, mmcra = 0;
unsigned int pmc, unit, byte, psel;
@@ -393,27 +394,26 @@ static int p970_compute_mmcr(u64 event[], int n_ev,
mmcra |= 0x2000; /* mark only one IOP per PPC instruction */
/* Return MMCRx values */
- mmcr[0] = mmcr0;
- mmcr[1] = mmcr1;
- mmcr[2] = mmcra;
+ mmcr->mmcr0 = mmcr0;
+ mmcr->mmcr1 = mmcr1;
+ mmcr->mmcra = mmcra;
return 0;
}
-static void p970_disable_pmc(unsigned int pmc, unsigned long mmcr[])
+static void p970_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
- int shift, i;
+ int shift;
+ /*
+ * Setting the PMCxSEL field to 0x08 disables PMC x.
+ */
if (pmc <= 1) {
shift = MMCR0_PMC1SEL_SH - 7 * pmc;
- i = 0;
+ mmcr->mmcr0 = (mmcr->mmcr0 & ~(0x1fUL << shift)) | (0x08UL << shift);
} else {
shift = MMCR1_PMC3SEL_SH - 5 * (pmc - 2);
- i = 1;
+ mmcr->mmcr1 = (mmcr->mmcr1 & ~(0x1fUL << shift)) | (0x08UL << shift);
}
- /*
- * Setting the PMCxSEL field to 0x08 disables PMC x.
- */
- mmcr[i] = (mmcr[i] & ~(0x1fUL << shift)) | (0x08UL << shift);
}
static int ppc970_generic_events[] = {
--
1.8.3.1
^ permalink raw reply related
* [v3 02/15] KVM: PPC: Book3S HV: Cleanup updates for kvm vcpu MMCR
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/kvm_host.h | 4 +++-
arch/powerpc/include/uapi/asm/kvm.h | 4 ++--
arch/powerpc/kernel/asm-offsets.c | 2 ++
arch/powerpc/kvm/book3s_hv.c | 16 ++++++++++++++--
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 ++++++------
tools/arch/powerpc/include/uapi/asm/kvm.h | 4 ++--
6 files changed, 29 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 7e2d061..fc115e2 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -637,7 +637,9 @@ struct kvm_vcpu_arch {
u32 ccr1;
u32 dbsr;
- u64 mmcr[5];
+ u64 mmcr[3];
+ u64 mmcra;
+ u64 mmcrs;
u32 pmc[8];
u32 spmc[2];
u64 siar;
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index 264e266..e55d847 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -510,8 +510,8 @@ struct kvm_ppc_cpu_char {
#define KVM_REG_PPC_MMCR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x10)
#define KVM_REG_PPC_MMCR1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x11)
-#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
-#define KVM_REG_PPC_MMCR2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x13)
+#define KVM_REG_PPC_MMCR2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
+#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x13)
#define KVM_REG_PPC_MMCRS (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x14)
#define KVM_REG_PPC_SIAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x15)
#define KVM_REG_PPC_SDAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x16)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 6657dc6..6fa4853 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -559,6 +559,8 @@ int main(void)
OFFSET(VCPU_IRQ_PENDING, kvm_vcpu, arch.irq_pending);
OFFSET(VCPU_DBELL_REQ, kvm_vcpu, arch.doorbell_request);
OFFSET(VCPU_MMCR, kvm_vcpu, arch.mmcr);
+ OFFSET(VCPU_MMCRA, kvm_vcpu, arch.mmcra);
+ OFFSET(VCPU_MMCRS, kvm_vcpu, arch.mmcrs);
OFFSET(VCPU_PMC, kvm_vcpu, arch.pmc);
OFFSET(VCPU_SPMC, kvm_vcpu, arch.spmc);
OFFSET(VCPU_SIAR, kvm_vcpu, arch.siar);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6bf66649..3f90eee 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1679,10 +1679,16 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
case KVM_REG_PPC_UAMOR:
*val = get_reg_val(id, vcpu->arch.uamor);
break;
- case KVM_REG_PPC_MMCR0 ... KVM_REG_PPC_MMCRS:
+ case KVM_REG_PPC_MMCR0 ... KVM_REG_PPC_MMCR2:
i = id - KVM_REG_PPC_MMCR0;
*val = get_reg_val(id, vcpu->arch.mmcr[i]);
break;
+ case KVM_REG_PPC_MMCRA:
+ *val = get_reg_val(id, vcpu->arch.mmcra);
+ break;
+ case KVM_REG_PPC_MMCRS:
+ *val = get_reg_val(id, vcpu->arch.mmcrs);
+ break;
case KVM_REG_PPC_PMC1 ... KVM_REG_PPC_PMC8:
i = id - KVM_REG_PPC_PMC1;
*val = get_reg_val(id, vcpu->arch.pmc[i]);
@@ -1900,10 +1906,16 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
case KVM_REG_PPC_UAMOR:
vcpu->arch.uamor = set_reg_val(id, *val);
break;
- case KVM_REG_PPC_MMCR0 ... KVM_REG_PPC_MMCRS:
+ case KVM_REG_PPC_MMCR0 ... KVM_REG_PPC_MMCR2:
i = id - KVM_REG_PPC_MMCR0;
vcpu->arch.mmcr[i] = set_reg_val(id, *val);
break;
+ case KVM_REG_PPC_MMCRA:
+ vcpu->arch.mmcra = set_reg_val(id, *val);
+ break;
+ case KVM_REG_PPC_MMCRS:
+ vcpu->arch.mmcrs = set_reg_val(id, *val);
+ break;
case KVM_REG_PPC_PMC1 ... KVM_REG_PPC_PMC8:
i = id - KVM_REG_PPC_PMC1;
vcpu->arch.pmc[i] = set_reg_val(id, *val);
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 7194389..702eaa2 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -3428,7 +3428,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
mtspr SPRN_PMC6, r9
ld r3, VCPU_MMCR(r4)
ld r5, VCPU_MMCR + 8(r4)
- ld r6, VCPU_MMCR + 16(r4)
+ ld r6, VCPU_MMCRA(r4)
ld r7, VCPU_SIAR(r4)
ld r8, VCPU_SDAR(r4)
mtspr SPRN_MMCR1, r5
@@ -3436,14 +3436,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
mtspr SPRN_SIAR, r7
mtspr SPRN_SDAR, r8
BEGIN_FTR_SECTION
- ld r5, VCPU_MMCR + 24(r4)
+ ld r5, VCPU_MMCR + 16(r4)
ld r6, VCPU_SIER(r4)
mtspr SPRN_MMCR2, r5
mtspr SPRN_SIER, r6
BEGIN_FTR_SECTION_NESTED(96)
lwz r7, VCPU_PMC + 24(r4)
lwz r8, VCPU_PMC + 28(r4)
- ld r9, VCPU_MMCR + 32(r4)
+ ld r9, VCPU_MMCRS(r4)
mtspr SPRN_SPMC1, r7
mtspr SPRN_SPMC2, r8
mtspr SPRN_MMCRS, r9
@@ -3551,9 +3551,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mfspr r8, SPRN_SDAR
std r4, VCPU_MMCR(r9)
std r5, VCPU_MMCR + 8(r9)
- std r6, VCPU_MMCR + 16(r9)
+ std r6, VCPU_MMCRA(r9)
BEGIN_FTR_SECTION
- std r10, VCPU_MMCR + 24(r9)
+ std r10, VCPU_MMCR + 16(r9)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
std r7, VCPU_SIAR(r9)
std r8, VCPU_SDAR(r9)
@@ -3578,7 +3578,7 @@ BEGIN_FTR_SECTION_NESTED(96)
mfspr r8, SPRN_MMCRS
stw r6, VCPU_PMC + 24(r9)
stw r7, VCPU_PMC + 28(r9)
- std r8, VCPU_MMCR + 32(r9)
+ std r8, VCPU_MMCRS(r9)
lis r4, 0x8000
mtspr SPRN_MMCRS, r4
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h
index 264e266..e55d847 100644
--- a/tools/arch/powerpc/include/uapi/asm/kvm.h
+++ b/tools/arch/powerpc/include/uapi/asm/kvm.h
@@ -510,8 +510,8 @@ struct kvm_ppc_cpu_char {
#define KVM_REG_PPC_MMCR0 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x10)
#define KVM_REG_PPC_MMCR1 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x11)
-#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
-#define KVM_REG_PPC_MMCR2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x13)
+#define KVM_REG_PPC_MMCR2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x12)
+#define KVM_REG_PPC_MMCRA (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x13)
#define KVM_REG_PPC_MMCRS (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x14)
#define KVM_REG_PPC_SIAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x15)
#define KVM_REG_PPC_SDAR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x16)
--
1.8.3.1
^ permalink raw reply related
* [v3 03/15] powerpc/perf: Update Power PMU cache_events to u64 type
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
Events of type PERF_TYPE_HW_CACHE was described for Power PMU
as: int (*cache_events)[type][op][result];
where type, op, result values unpacked from the event attribute config
value is used to generate the raw event code at runtime.
So far the event code values which used to create these cache-related
events were within 32 bit and `int` type worked. In power10,
some of the event codes are of 64-bit value and hence update the
Power PMU cache_events to `u64` type in `power_pmu` struct.
Also propagate this change to existing all PMU driver code paths
which are using ppmu->cache_events.
Signed-off-by: Athira Rajeev<atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 2 +-
arch/powerpc/perf/core-book3s.c | 2 +-
arch/powerpc/perf/generic-compat-pmu.c | 2 +-
arch/powerpc/perf/mpc7450-pmu.c | 2 +-
arch/powerpc/perf/power5+-pmu.c | 2 +-
arch/powerpc/perf/power5-pmu.c | 2 +-
arch/powerpc/perf/power6-pmu.c | 2 +-
arch/powerpc/perf/power7-pmu.c | 2 +-
arch/powerpc/perf/power8-pmu.c | 2 +-
arch/powerpc/perf/power9-pmu.c | 2 +-
arch/powerpc/perf/ppc970-pmu.c | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index f9a3668..14b8dc1 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -53,7 +53,7 @@ struct power_pmu {
const struct attribute_group **attr_groups;
int n_generic;
int *generic_events;
- int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+ u64 (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX];
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 18b1b6a..f4d07b5 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1790,7 +1790,7 @@ static void hw_perf_event_destroy(struct perf_event *event)
static int hw_perf_cache_event(u64 config, u64 *eventp)
{
unsigned long type, op, result;
- int ev;
+ u64 ev;
if (!ppmu->cache_events)
return -EINVAL;
diff --git a/arch/powerpc/perf/generic-compat-pmu.c b/arch/powerpc/perf/generic-compat-pmu.c
index 5e5a54d..eb8a6aaf 100644
--- a/arch/powerpc/perf/generic-compat-pmu.c
+++ b/arch/powerpc/perf/generic-compat-pmu.c
@@ -101,7 +101,7 @@ enum {
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 generic_compat_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0,
diff --git a/arch/powerpc/perf/mpc7450-pmu.c b/arch/powerpc/perf/mpc7450-pmu.c
index 826de25..1919e9d 100644
--- a/arch/powerpc/perf/mpc7450-pmu.c
+++ b/arch/powerpc/perf/mpc7450-pmu.c
@@ -361,7 +361,7 @@ static void mpc7450_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 mpc7450_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x225 },
[C(OP_WRITE)] = { 0, 0x227 },
diff --git a/arch/powerpc/perf/power5+-pmu.c b/arch/powerpc/perf/power5+-pmu.c
index 5f0821e..a62b2cd 100644
--- a/arch/powerpc/perf/power5+-pmu.c
+++ b/arch/powerpc/perf/power5+-pmu.c
@@ -619,7 +619,7 @@ static void power5p_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5p_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x1c10a8, 0x3c1088 },
[C(OP_WRITE)] = { 0x2c10a8, 0xc10c3 },
diff --git a/arch/powerpc/perf/power5-pmu.c b/arch/powerpc/perf/power5-pmu.c
index 426021d..8732b58 100644
--- a/arch/powerpc/perf/power5-pmu.c
+++ b/arch/powerpc/perf/power5-pmu.c
@@ -561,7 +561,7 @@ static void power5_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power5_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x4c1090, 0x3c1088 },
[C(OP_WRITE)] = { 0x3c1090, 0xc10c3 },
diff --git a/arch/powerpc/perf/power6-pmu.c b/arch/powerpc/perf/power6-pmu.c
index e343a51..0e318cf 100644
--- a/arch/powerpc/perf/power6-pmu.c
+++ b/arch/powerpc/perf/power6-pmu.c
@@ -481,7 +481,7 @@ static void p6_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* are event codes.
* The "DTLB" and "ITLB" events relate to the DERAT and IERAT.
*/
-static int power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x280030, 0x80080 },
[C(OP_WRITE)] = { 0x180032, 0x80088 },
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 3152336..5e0bf09 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -333,7 +333,7 @@ static void power7_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0xc880, 0x400f0 },
[C(OP_WRITE)] = { 0, 0x300f0 },
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 3a5fcc2..5282e84 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -253,7 +253,7 @@ static void power8_config_bhrb(u64 pmu_bhrb_filter)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index 08c3ef7..05dae38 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -310,7 +310,7 @@ static void power9_config_bhrb(u64 pmu_bhrb_filter)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 power9_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[ C(L1D) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
diff --git a/arch/powerpc/perf/ppc970-pmu.c b/arch/powerpc/perf/ppc970-pmu.c
index 89a90ab..d35223f 100644
--- a/arch/powerpc/perf/ppc970-pmu.c
+++ b/arch/powerpc/perf/ppc970-pmu.c
@@ -432,7 +432,7 @@ static void p970_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
-static int ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static u64 ppc970_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x8810, 0x3810 },
[C(OP_WRITE)] = { 0x7810, 0x813 },
--
1.8.3.1
^ permalink raw reply related
* [v3 04/15] powerpc/perf: Add support for ISA3.1 PMU SPRs
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
From: Madhavan Srinivasan <maddy@linux.ibm.com>
PowerISA v3.1 includes new performance monitoring unit(PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register 2 (SIER2)
Sampled Instruction Event Register 3 (SIER3)
MMCR3 is added for further sampling related configuration
control. SIER2/SIER3 are added to provide additional
information about the sampled instruction.
Patch adds new PPMU flag called "PPMU_ARCH_310S" to support
handling of these new SPRs, updates the struct thread_struct
to include these new SPRs, include MMCR3 in struct mmcr_regs.
This is needed to support programming of MMCR3 SPR during
event_[enable/disable]. Patch also adds the sysfs support
for the MMCR3 SPR along with SPRN_ macros for these new pmu sprs.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 2 ++
arch/powerpc/include/asm/processor.h | 4 ++++
arch/powerpc/include/asm/reg.h | 6 ++++++
arch/powerpc/kernel/sysfs.c | 8 ++++++++
arch/powerpc/perf/core-book3s.c | 29 ++++++++++++++++++++++++++++
5 files changed, 49 insertions(+)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 14b8dc1..832450a 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -22,6 +22,7 @@ struct mmcr_regs {
unsigned long mmcr1;
unsigned long mmcr2;
unsigned long mmcra;
+ unsigned long mmcr3;
};
/*
* This struct provides the constants and functions needed to
@@ -75,6 +76,7 @@ struct power_pmu {
#define PPMU_HAS_SIER 0x00000040 /* Has SIER */
#define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */
#define PPMU_NO_SIAR 0x00000100 /* Do not use SIAR */
+#define PPMU_ARCH_310S 0x00000200 /* Has MMCR3, SIER2 and SIER3 */
/*
* Values for flags to get_alternatives()
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 52a6783..a466e94 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -272,6 +272,10 @@ struct thread_struct {
unsigned mmcr0;
unsigned used_ebb;
+ unsigned long mmcr3;
+ unsigned long sier2;
+ unsigned long sier3;
+
#endif
};
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 88e6c78..21a1b2d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -876,7 +876,9 @@
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
#define SPRN_MMCR2 785
+#define SPRN_MMCR3 754
#define SPRN_UMMCR2 769
+#define SPRN_UMMCR3 738
#define SPRN_MMCRA 0x312
#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
@@ -918,6 +920,10 @@
#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
+#define SPRN_SIER2 752
+#define SPRN_SIER3 753
+#define SPRN_USIER2 736
+#define SPRN_USIER3 737
#define SPRN_SIAR 796
#define SPRN_SDAR 797
#define SPRN_TACR 888
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 571b325..46b4ebc 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -622,8 +622,10 @@ void ppc_enable_pmcs(void)
SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
+SYSFS_PMCSETUP(mmcr3, SPRN_MMCR3);
static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static DEVICE_ATTR(mmcr3, 0600, show_mmcr3, store_mmcr3);
#endif /* HAS_PPC_PMC56 */
@@ -886,6 +888,9 @@ static int register_cpu_online(unsigned int cpu)
#ifdef CONFIG_PMU_SYSFS
if (cpu_has_feature(CPU_FTR_MMCRA))
device_create_file(s, &dev_attr_mmcra);
+
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ device_create_file(s, &dev_attr_mmcr3);
#endif /* CONFIG_PMU_SYSFS */
if (cpu_has_feature(CPU_FTR_PURR)) {
@@ -980,6 +985,9 @@ static int unregister_cpu_online(unsigned int cpu)
#ifdef CONFIG_PMU_SYSFS
if (cpu_has_feature(CPU_FTR_MMCRA))
device_remove_file(s, &dev_attr_mmcra);
+
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ device_remove_file(s, &dev_attr_mmcr3);
#endif /* CONFIG_PMU_SYSFS */
if (cpu_has_feature(CPU_FTR_PURR)) {
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index f4d07b5..ca32fc0 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -72,6 +72,11 @@ struct cpu_hw_events {
/*
* 32-bit doesn't have MMCRA but does have an MMCR2,
* and a few other names are different.
+ * Also 32-bit doesn't have MMCR3, SIER2 and SIER3.
+ * Define them as zero knowing that any code path accessing
+ * these registers (via mtspr/mfspr) are done under ppmu flag
+ * check for PPMU_ARCH_310S and we will not enter that code path
+ * for 32-bit.
*/
#ifdef CONFIG_PPC32
@@ -85,6 +90,9 @@ struct cpu_hw_events {
#define MMCR0_PMCC_U6 0
#define SPRN_MMCRA SPRN_MMCR2
+#define SPRN_MMCR3 0
+#define SPRN_SIER2 0
+#define SPRN_SIER3 0
#define MMCRA_SAMPLE_ENABLE 0
static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
@@ -581,6 +589,11 @@ static void ebb_switch_out(unsigned long mmcr0)
current->thread.sdar = mfspr(SPRN_SDAR);
current->thread.mmcr0 = mmcr0 & MMCR0_USER_MASK;
current->thread.mmcr2 = mfspr(SPRN_MMCR2) & MMCR2_USER_MASK;
+ if (ppmu->flags & PPMU_ARCH_310S) {
+ current->thread.mmcr3 = mfspr(SPRN_MMCR3);
+ current->thread.sier2 = mfspr(SPRN_SIER2);
+ current->thread.sier3 = mfspr(SPRN_SIER3);
+ }
}
static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
@@ -620,6 +633,12 @@ static unsigned long ebb_switch_in(bool ebb, struct cpu_hw_events *cpuhw)
* instead manage the MMCR2 entirely by itself.
*/
mtspr(SPRN_MMCR2, cpuhw->mmcr.mmcr2 | current->thread.mmcr2);
+
+ if (ppmu->flags & PPMU_ARCH_310S) {
+ mtspr(SPRN_MMCR3, current->thread.mmcr3);
+ mtspr(SPRN_SIER2, current->thread.sier2);
+ mtspr(SPRN_SIER3, current->thread.sier3);
+ }
out:
return mmcr0;
}
@@ -840,6 +859,11 @@ void perf_event_print_debug(void)
pr_info("EBBRR: %016lx BESCR: %016lx\n",
mfspr(SPRN_EBBRR), mfspr(SPRN_BESCR));
}
+
+ if (ppmu->flags & PPMU_ARCH_310S) {
+ pr_info("MMCR3: %016lx SIER2: %016lx SIER3: %016lx\n",
+ mfspr(SPRN_MMCR3), mfspr(SPRN_SIER2), mfspr(SPRN_SIER3));
+ }
#endif
pr_info("SIAR: %016lx SDAR: %016lx SIER: %016lx\n",
mfspr(SPRN_SIAR), sdar, sier);
@@ -1305,6 +1329,8 @@ static void power_pmu_enable(struct pmu *pmu)
if (!cpuhw->n_added) {
mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
+ if (ppmu->flags & PPMU_ARCH_310S)
+ mtspr(SPRN_MMCR3, cpuhw->mmcr.mmcr3);
goto out_enable;
}
@@ -1348,6 +1374,9 @@ static void power_pmu_enable(struct pmu *pmu)
if (ppmu->flags & PPMU_ARCH_207S)
mtspr(SPRN_MMCR2, cpuhw->mmcr.mmcr2);
+ if (ppmu->flags & PPMU_ARCH_310S)
+ mtspr(SPRN_MMCR3, cpuhw->mmcr.mmcr3);
+
/*
* Read off any pre-existing events that need to move
* to another PMC.
--
1.8.3.1
^ permalink raw reply related
* [v3 05/15] KVM: PPC: Book3S HV: Save/restore new PMU registers
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
PowerISA v3.1 has added new performance monitoring unit (PMU)
special purpose registers (SPRs). They are
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Patch addes support to save/restore these new
SPRs while entering/exiting guest. Also includes
changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
And adds new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
Documentation/virt/kvm/api.rst | 3 +++
arch/powerpc/include/asm/kvm_book3s_asm.h | 2 +-
arch/powerpc/include/asm/kvm_host.h | 4 ++--
arch/powerpc/include/uapi/asm/kvm.h | 5 +++++
arch/powerpc/kernel/asm-offsets.c | 3 +++
arch/powerpc/kvm/book3s_hv.c | 22 ++++++++++++++++++++--
arch/powerpc/kvm/book3s_hv_interrupts.S | 8 ++++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 24 ++++++++++++++++++++++++
tools/arch/powerpc/include/uapi/asm/kvm.h | 5 +++++
9 files changed, 71 insertions(+), 5 deletions(-)
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 426f945..8cb6eb7 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -2156,9 +2156,12 @@ registers, find a list below:
PPC KVM_REG_PPC_MMCRA 64
PPC KVM_REG_PPC_MMCR2 64
PPC KVM_REG_PPC_MMCRS 64
+ PPC KVM_REG_PPC_MMCR3 64
PPC KVM_REG_PPC_SIAR 64
PPC KVM_REG_PPC_SDAR 64
PPC KVM_REG_PPC_SIER 64
+ PPC KVM_REG_PPC_SIER2 64
+ PPC KVM_REG_PPC_SIER3 64
PPC KVM_REG_PPC_PMC1 32
PPC KVM_REG_PPC_PMC2 32
PPC KVM_REG_PPC_PMC3 32
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 45704f2..078f464 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -119,7 +119,7 @@ struct kvmppc_host_state {
void __iomem *xive_tima_virt;
u32 saved_xirr;
u64 dabr;
- u64 host_mmcr[7]; /* MMCR 0,1,A, SIAR, SDAR, MMCR2, SIER */
+ u64 host_mmcr[10]; /* MMCR 0,1,A, SIAR, SDAR, MMCR2, SIER, MMCR3, SIER2/3 */
u32 host_pmc[8];
u64 host_purr;
u64 host_spurr;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index fc115e2..4f26623 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -637,14 +637,14 @@ struct kvm_vcpu_arch {
u32 ccr1;
u32 dbsr;
- u64 mmcr[3];
+ u64 mmcr[4];
u64 mmcra;
u64 mmcrs;
u32 pmc[8];
u32 spmc[2];
u64 siar;
u64 sdar;
- u64 sier;
+ u64 sier[3];
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
u64 tfhar;
u64 texasr;
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index e55d847..1cc779d 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -640,6 +640,11 @@ struct kvm_ppc_cpu_char {
#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf)
#define KVM_REG_PPC_PTCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc0)
+/* POWER10 registers */
+#define KVM_REG_PPC_MMCR3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc1)
+#define KVM_REG_PPC_SIER2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc2)
+#define KVM_REG_PPC_SIER3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc3)
+
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
*/
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 6fa4853..8711c21 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -698,6 +698,9 @@ int main(void)
HSTATE_FIELD(HSTATE_SDAR, host_mmcr[4]);
HSTATE_FIELD(HSTATE_MMCR2, host_mmcr[5]);
HSTATE_FIELD(HSTATE_SIER, host_mmcr[6]);
+ HSTATE_FIELD(HSTATE_MMCR3, host_mmcr[7]);
+ HSTATE_FIELD(HSTATE_SIER2, host_mmcr[8]);
+ HSTATE_FIELD(HSTATE_SIER3, host_mmcr[9]);
HSTATE_FIELD(HSTATE_PMC1, host_pmc[0]);
HSTATE_FIELD(HSTATE_PMC2, host_pmc[1]);
HSTATE_FIELD(HSTATE_PMC3, host_pmc[2]);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 3f90eee..d650d31 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1689,6 +1689,9 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
case KVM_REG_PPC_MMCRS:
*val = get_reg_val(id, vcpu->arch.mmcrs);
break;
+ case KVM_REG_PPC_MMCR3:
+ *val = get_reg_val(id, vcpu->arch.mmcr[3]);
+ break;
case KVM_REG_PPC_PMC1 ... KVM_REG_PPC_PMC8:
i = id - KVM_REG_PPC_PMC1;
*val = get_reg_val(id, vcpu->arch.pmc[i]);
@@ -1704,7 +1707,13 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
*val = get_reg_val(id, vcpu->arch.sdar);
break;
case KVM_REG_PPC_SIER:
- *val = get_reg_val(id, vcpu->arch.sier);
+ *val = get_reg_val(id, vcpu->arch.sier[0]);
+ break;
+ case KVM_REG_PPC_SIER2:
+ *val = get_reg_val(id, vcpu->arch.sier[1]);
+ break;
+ case KVM_REG_PPC_SIER3:
+ *val = get_reg_val(id, vcpu->arch.sier[2]);
break;
case KVM_REG_PPC_IAMR:
*val = get_reg_val(id, vcpu->arch.iamr);
@@ -1916,6 +1925,9 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
case KVM_REG_PPC_MMCRS:
vcpu->arch.mmcrs = set_reg_val(id, *val);
break;
+ case KVM_REG_PPC_MMCR3:
+ *val = get_reg_val(id, vcpu->arch.mmcr[3]);
+ break;
case KVM_REG_PPC_PMC1 ... KVM_REG_PPC_PMC8:
i = id - KVM_REG_PPC_PMC1;
vcpu->arch.pmc[i] = set_reg_val(id, *val);
@@ -1931,7 +1943,13 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
vcpu->arch.sdar = set_reg_val(id, *val);
break;
case KVM_REG_PPC_SIER:
- vcpu->arch.sier = set_reg_val(id, *val);
+ vcpu->arch.sier[0] = set_reg_val(id, *val);
+ break;
+ case KVM_REG_PPC_SIER2:
+ vcpu->arch.sier[1] = set_reg_val(id, *val);
+ break;
+ case KVM_REG_PPC_SIER3:
+ vcpu->arch.sier[2] = set_reg_val(id, *val);
break;
case KVM_REG_PPC_IAMR:
vcpu->arch.iamr = set_reg_val(id, *val);
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index 63fd81f..59822cb 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -140,6 +140,14 @@ BEGIN_FTR_SECTION
std r8, HSTATE_MMCR2(r13)
std r9, HSTATE_SIER(r13)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+BEGIN_FTR_SECTION
+ mfspr r5, SPRN_MMCR3
+ mfspr r6, SPRN_SIER2
+ mfspr r7, SPRN_SIER3
+ std r5, HSTATE_MMCR3(r13)
+ std r6, HSTATE_SIER2(r13)
+ std r7, HSTATE_SIER3(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
mfspr r3, SPRN_PMC1
mfspr r5, SPRN_PMC2
mfspr r6, SPRN_PMC3
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 702eaa2..799d6d0 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -3436,6 +3436,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG)
mtspr SPRN_SIAR, r7
mtspr SPRN_SDAR, r8
BEGIN_FTR_SECTION
+ ld r5, VCPU_MMCR + 24(r4)
+ ld r6, VCPU_SIER + 8(r4)
+ ld r7, VCPU_SIER + 16(r4)
+ mtspr SPRN_MMCR3, r5
+ mtspr SPRN_SIER2, r6
+ mtspr SPRN_SIER3, r7
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
+BEGIN_FTR_SECTION
ld r5, VCPU_MMCR + 16(r4)
ld r6, VCPU_SIER(r4)
mtspr SPRN_MMCR2, r5
@@ -3496,6 +3504,14 @@ BEGIN_FTR_SECTION
mtspr SPRN_MMCR2, r8
mtspr SPRN_SIER, r9
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+BEGIN_FTR_SECTION
+ ld r5, HSTATE_MMCR3(r13)
+ ld r6, HSTATE_SIER2(r13)
+ ld r7, HSTATE_SIER3(r13)
+ mtspr SPRN_MMCR3, r5
+ mtspr SPRN_SIER2, r6
+ mtspr SPRN_SIER3, r7
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
mtspr SPRN_MMCR0, r3
isync
mtlr r0
@@ -3555,6 +3571,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
BEGIN_FTR_SECTION
std r10, VCPU_MMCR + 16(r9)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
+BEGIN_FTR_SECTION
+ mfspr r5, SPRN_MMCR3
+ mfspr r6, SPRN_SIER2
+ mfspr r7, SPRN_SIER3
+ std r5, VCPU_MMCR + 24(r9)
+ std r6, VCPU_SIER + 8(r9)
+ std r7, VCPU_SIER + 16(r9)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
std r7, VCPU_SIAR(r9)
std r8, VCPU_SDAR(r9)
mfspr r3, SPRN_PMC1
diff --git a/tools/arch/powerpc/include/uapi/asm/kvm.h b/tools/arch/powerpc/include/uapi/asm/kvm.h
index e55d847..1cc779d 100644
--- a/tools/arch/powerpc/include/uapi/asm/kvm.h
+++ b/tools/arch/powerpc/include/uapi/asm/kvm.h
@@ -640,6 +640,11 @@ struct kvm_ppc_cpu_char {
#define KVM_REG_PPC_ONLINE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xbf)
#define KVM_REG_PPC_PTCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc0)
+/* POWER10 registers */
+#define KVM_REG_PPC_MMCR3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc1)
+#define KVM_REG_PPC_SIER2 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc2)
+#define KVM_REG_PPC_SIER3 (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xc3)
+
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
*/
--
1.8.3.1
^ permalink raw reply related
* [v3 06/15] powerpc/xmon: Add PowerISA v3.1 PMU SPRs
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
From: Madhavan Srinivasan <maddy@linux.ibm.com>
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
---
arch/powerpc/xmon/xmon.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 7efe4bc..16f5493 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2022,6 +2022,18 @@ static void dump_300_sprs(void)
#endif
}
+static void dump_310_sprs(void)
+{
+#ifdef CONFIG_PPC64
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return;
+
+ printf("mmcr3 = %.16lx, sier2 = %.16lx, sier3 = %.16lx\n",
+ mfspr(SPRN_MMCR3), mfspr(SPRN_SIER2), mfspr(SPRN_SIER3));
+
+#endif
+}
+
static void dump_one_spr(int spr, bool show_unimplemented)
{
unsigned long val;
@@ -2076,6 +2088,7 @@ static void super_regs(void)
dump_206_sprs();
dump_207_sprs();
dump_300_sprs();
+ dump_310_sprs();
return;
}
--
1.8.3.1
^ permalink raw reply related
* [v3 07/15] powerpc/perf: Add power10_feat to dt_cpu_ftrs
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
From: Madhavan Srinivasan <maddy@linux.ibm.com>
Add power10 feature function to dt_cpu_ftrs.c along
with a power10 specific init() to initialize pmu sprs,
sets the oprofile_cpu_type and cpu_features. This will
enable performance monitoring unit(PMU) for Power10
in CPU features with "performance-monitor-power10".
For PowerISA v3.1, BHRB disable is controlled via Monitor Mode
Control Register A (MMCRA) bit, namely "BHRB Recording Disable
(BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
feature at boot for power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
---
arch/powerpc/include/asm/reg.h | 3 +++
arch/powerpc/kernel/cpu_setup_power.S | 8 ++++++++
arch/powerpc/kernel/dt_cpu_ftrs.c | 26 ++++++++++++++++++++++++++
3 files changed, 37 insertions(+)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 21a1b2d..900ada1 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1068,6 +1068,9 @@
#define MMCR0_PMC2_LOADMISSTIME 0x5
#endif
+/* BHRB disable bit for PowerISA v3.10 */
+#define MMCRA_BHRB_DISABLE 0x0000002000000000
+
/*
* SPRG usage:
*
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index efdcfa7..b8e0d1e 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -94,6 +94,7 @@ _GLOBAL(__restore_cpu_power8)
_GLOBAL(__setup_cpu_power10)
mflr r11
bl __init_FSCR_power10
+ bl __init_PMU_ISA31
b 1f
_GLOBAL(__setup_cpu_power9)
@@ -233,3 +234,10 @@ __init_PMU_ISA207:
li r5,0
mtspr SPRN_MMCRS,r5
blr
+
+__init_PMU_ISA31:
+ li r5,0
+ mtspr SPRN_MMCR3,r5
+ LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
+ mtspr SPRN_MMCRA,r5
+ blr
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 3a40951..f482286 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -450,6 +450,31 @@ static int __init feat_enable_pmu_power9(struct dt_cpu_feature *f)
return 1;
}
+static void init_pmu_power10(void)
+{
+ init_pmu_power9();
+
+ mtspr(SPRN_MMCR3, 0);
+ mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
+}
+
+static int __init feat_enable_pmu_power10(struct dt_cpu_feature *f)
+{
+ hfscr_pmu_enable();
+
+ init_pmu_power10();
+ init_pmu_registers = init_pmu_power10;
+
+ cur_cpu_spec->cpu_features |= CPU_FTR_MMCRA;
+ cur_cpu_spec->cpu_user_features |= PPC_FEATURE_PSERIES_PERFMON_COMPAT;
+
+ cur_cpu_spec->num_pmcs = 6;
+ cur_cpu_spec->pmc_type = PPC_PMC_IBM;
+ cur_cpu_spec->oprofile_cpu_type = "ppc64/power10";
+
+ return 1;
+}
+
static int __init feat_enable_tm(struct dt_cpu_feature *f)
{
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -639,6 +664,7 @@ struct dt_cpu_feature_match {
{"pc-relative-addressing", feat_enable, 0},
{"machine-check-power9", feat_enable_mce_power9, 0},
{"performance-monitor-power9", feat_enable_pmu_power9, 0},
+ {"performance-monitor-power10", feat_enable_pmu_power10, 0},
{"event-based-branch-v3", feat_enable, 0},
{"random-number-generator", feat_enable, 0},
{"system-call-vectored", feat_disable, 0},
--
1.8.3.1
^ permalink raw reply related
* [v3 08/15] powerpc/perf: power10 Performance Monitoring support
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
Base enablement patch to register performance monitoring
hardware support for power10. Patch introduce the raw event
encoding format, defines the supported list of events, config
fields for the event attributes and their corresponding bit values
which are exported via sysfs.
Patch also enhances the support function in isa207_common.c to
include power10 pmu hardware.
[Enablement of base PMU driver code]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[Addition of ISA macros for counter support functions]
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[Fix compilation warning for missing prototype for init_power10_pmu]
Reported-by: kernel test robot <lkp@intel.com>
---
arch/powerpc/perf/Makefile | 2 +-
arch/powerpc/perf/core-book3s.c | 2 +
arch/powerpc/perf/internal.h | 1 +
arch/powerpc/perf/isa207-common.c | 59 ++++-
arch/powerpc/perf/isa207-common.h | 33 ++-
arch/powerpc/perf/power10-events-list.h | 70 ++++++
arch/powerpc/perf/power10-pmu.c | 410 ++++++++++++++++++++++++++++++++
7 files changed, 566 insertions(+), 11 deletions(-)
create mode 100644 arch/powerpc/perf/power10-events-list.h
create mode 100644 arch/powerpc/perf/power10-pmu.c
diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index 53d614e..c02854d 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o bhrb.o
obj64-$(CONFIG_PPC_PERF_CTRS) += ppc970-pmu.o power5-pmu.o \
power5+-pmu.o power6-pmu.o power7-pmu.o \
isa207-common.o power8-pmu.o power9-pmu.o \
- generic-compat-pmu.o
+ generic-compat-pmu.o power10-pmu.o
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
obj-$(CONFIG_PPC_POWERNV) += imc-pmu.o
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index ca32fc0..0ffb757d 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2332,6 +2332,8 @@ static int __init init_ppc64_pmu(void)
return 0;
else if (!init_power9_pmu())
return 0;
+ else if (!init_power10_pmu())
+ return 0;
else if (!init_ppc970_pmu())
return 0;
else
diff --git a/arch/powerpc/perf/internal.h b/arch/powerpc/perf/internal.h
index f755c64..80bbf72 100644
--- a/arch/powerpc/perf/internal.h
+++ b/arch/powerpc/perf/internal.h
@@ -9,4 +9,5 @@
extern int init_power7_pmu(void);
extern int init_power8_pmu(void);
extern int init_power9_pmu(void);
+extern int init_power10_pmu(void);
extern int init_generic_compat_pmu(void);
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 2fe63f2..77643f3 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -55,7 +55,9 @@ static bool is_event_valid(u64 event)
{
u64 valid_mask = EVENT_VALID_MASK;
- if (cpu_has_feature(CPU_FTR_ARCH_300))
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ valid_mask = p10_EVENT_VALID_MASK;
+ else if (cpu_has_feature(CPU_FTR_ARCH_300))
valid_mask = p9_EVENT_VALID_MASK;
return !(event & ~valid_mask);
@@ -69,6 +71,14 @@ static inline bool is_event_marked(u64 event)
return false;
}
+static unsigned long sdar_mod_val(u64 event)
+{
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ return p10_SDAR_MODE(event);
+
+ return p9_SDAR_MODE(event);
+}
+
static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
{
/*
@@ -79,7 +89,7 @@ static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
* MMCRA[SDAR_MODE] will be programmed as "0b01" for continous sampling
* mode and will be un-changed when setting MMCRA[63] (Marked events).
*
- * Incase of Power9:
+ * Incase of Power9/power10:
* Marked event: MMCRA[SDAR_MODE] will be set to 0b00 ('No Updates'),
* or if group already have any marked events.
* For rest
@@ -90,8 +100,8 @@ static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (is_event_marked(event) || (*mmcra & MMCRA_SAMPLE_ENABLE))
*mmcra &= MMCRA_SDAR_MODE_NO_UPDATES;
- else if (p9_SDAR_MODE(event))
- *mmcra |= p9_SDAR_MODE(event) << MMCRA_SDAR_MODE_SHIFT;
+ else if (sdar_mod_val(event))
+ *mmcra |= sdar_mod_val(event) << MMCRA_SDAR_MODE_SHIFT;
else
*mmcra |= MMCRA_SDAR_MODE_DCACHE;
} else
@@ -134,7 +144,11 @@ static bool is_thresh_cmp_valid(u64 event)
/*
* Check the mantissa upper two bits are not zero, unless the
* exponent is also zero. See the THRESH_CMP_MANTISSA doc.
+ * Power10: thresh_cmp is replaced by l2_l3 event select.
*/
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ return false;
+
cmp = (event >> EVENT_THR_CMP_SHIFT) & EVENT_THR_CMP_MASK;
exp = cmp >> 7;
@@ -251,7 +265,12 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
pmc = (event >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
unit = (event >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK;
- cache = (event >> EVENT_CACHE_SEL_SHIFT) & EVENT_CACHE_SEL_MASK;
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ cache = (event >> EVENT_CACHE_SEL_SHIFT) &
+ p10_EVENT_CACHE_SEL_MASK;
+ else
+ cache = (event >> EVENT_CACHE_SEL_SHIFT) &
+ EVENT_CACHE_SEL_MASK;
ebb = (event >> EVENT_EBB_SHIFT) & EVENT_EBB_MASK;
if (pmc) {
@@ -283,7 +302,10 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
}
if (unit >= 6 && unit <= 9) {
- if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+ if (cpu_has_feature(CPU_FTR_ARCH_31) && (unit == 6)) {
+ mask |= CNST_L2L3_GROUP_MASK;
+ value |= CNST_L2L3_GROUP_VAL(event >> p10_L2L3_EVENT_SHIFT);
+ } else if (cpu_has_feature(CPU_FTR_ARCH_300)) {
mask |= CNST_CACHE_GROUP_MASK;
value |= CNST_CACHE_GROUP_VAL(event & 0xff);
@@ -367,6 +389,7 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
struct perf_event *pevents[])
{
unsigned long mmcra, mmcr1, mmcr2, unit, combine, psel, cache, val;
+ unsigned long mmcr3;
unsigned int pmc, pmc_inuse;
int i;
@@ -379,7 +402,7 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
pmc_inuse |= 1 << pmc;
}
- mmcra = mmcr1 = mmcr2 = 0;
+ mmcra = mmcr1 = mmcr2 = mmcr3 = 0;
/* Second pass: assign PMCs, set all MMCR1 fields */
for (i = 0; i < n_ev; ++i) {
@@ -438,8 +461,17 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
mmcra |= val << MMCRA_THR_CTL_SHIFT;
val = (event[i] >> EVENT_THR_SEL_SHIFT) & EVENT_THR_SEL_MASK;
mmcra |= val << MMCRA_THR_SEL_SHIFT;
- val = (event[i] >> EVENT_THR_CMP_SHIFT) & EVENT_THR_CMP_MASK;
- mmcra |= thresh_cmp_val(val);
+ if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
+ val = (event[i] >> EVENT_THR_CMP_SHIFT) &
+ EVENT_THR_CMP_MASK;
+ mmcra |= thresh_cmp_val(val);
+ }
+ }
+
+ if (cpu_has_feature(CPU_FTR_ARCH_31) && (unit == 6)) {
+ val = (event[i] >> p10_L2L3_EVENT_SHIFT) &
+ p10_EVENT_L2L3_SEL_MASK;
+ mmcr2 |= val << p10_L2L3_SEL_SHIFT;
}
if (event[i] & EVENT_WANTS_BHRB) {
@@ -460,6 +492,14 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
mmcr2 |= MMCR2_FCS(pmc);
}
+ if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+ if (pmc <= 4) {
+ val = (event[i] >> p10_EVENT_MMCR3_SHIFT) &
+ p10_EVENT_MMCR3_MASK;
+ mmcr3 |= val << MMCR3_SHIFT(pmc);
+ }
+ }
+
hwc[i] = pmc - 1;
}
@@ -480,6 +520,7 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
mmcr->mmcr1 = mmcr1;
mmcr->mmcra = mmcra;
mmcr->mmcr2 = mmcr2;
+ mmcr->mmcr3 = mmcr3;
return 0;
}
diff --git a/arch/powerpc/perf/isa207-common.h b/arch/powerpc/perf/isa207-common.h
index df968fd..044de65 100644
--- a/arch/powerpc/perf/isa207-common.h
+++ b/arch/powerpc/perf/isa207-common.h
@@ -87,6 +87,31 @@
EVENT_LINUX_MASK | \
EVENT_PSEL_MASK))
+/* Contants to support power10 raw encoding format */
+#define p10_SDAR_MODE_SHIFT 22
+#define p10_SDAR_MODE_MASK 0x3ull
+#define p10_SDAR_MODE(v) (((v) >> p10_SDAR_MODE_SHIFT) & \
+ p10_SDAR_MODE_MASK)
+#define p10_EVENT_L2L3_SEL_MASK 0x1f
+#define p10_L2L3_SEL_SHIFT 3
+#define p10_L2L3_EVENT_SHIFT 40
+#define p10_EVENT_THRESH_MASK 0xffffull
+#define p10_EVENT_CACHE_SEL_MASK 0x3ull
+#define p10_EVENT_MMCR3_MASK 0x7fffull
+#define p10_EVENT_MMCR3_SHIFT 45
+
+#define p10_EVENT_VALID_MASK \
+ ((p10_SDAR_MODE_MASK << p10_SDAR_MODE_SHIFT | \
+ (p10_EVENT_THRESH_MASK << EVENT_THRESH_SHIFT) | \
+ (EVENT_SAMPLE_MASK << EVENT_SAMPLE_SHIFT) | \
+ (p10_EVENT_CACHE_SEL_MASK << EVENT_CACHE_SEL_SHIFT) | \
+ (EVENT_PMC_MASK << EVENT_PMC_SHIFT) | \
+ (EVENT_UNIT_MASK << EVENT_UNIT_SHIFT) | \
+ (p9_EVENT_COMBINE_MASK << p9_EVENT_COMBINE_SHIFT) | \
+ (p10_EVENT_MMCR3_MASK << p10_EVENT_MMCR3_SHIFT) | \
+ (EVENT_MARKED_MASK << EVENT_MARKED_SHIFT) | \
+ EVENT_LINUX_MASK | \
+ EVENT_PSEL_MASK))
/*
* Layout of constraint bits:
*
@@ -135,6 +160,9 @@
#define CNST_CACHE_PMC4_VAL (1ull << 54)
#define CNST_CACHE_PMC4_MASK CNST_CACHE_PMC4_VAL
+#define CNST_L2L3_GROUP_VAL(v) (((v) & 0x1full) << 55)
+#define CNST_L2L3_GROUP_MASK CNST_L2L3_GROUP_VAL(0x1f)
+
/*
* For NC we are counting up to 4 events. This requires three bits, and we need
* the fifth event to overflow and set the 4th bit. To achieve that we bias the
@@ -191,7 +219,7 @@
#define MMCRA_THR_CTR_EXP(v) (((v) >> MMCRA_THR_CTR_EXP_SHIFT) &\
MMCRA_THR_CTR_EXP_MASK)
-/* MMCR1 Threshold Compare bit constant for power9 */
+/* MMCRA Threshold Compare bit constant for power9 */
#define p9_MMCRA_THR_CMP_SHIFT 45
/* Bits in MMCR2 for PowerISA v2.07 */
@@ -202,6 +230,9 @@
#define MAX_ALT 2
#define MAX_PMU_COUNTERS 6
+/* Bits in MMCR3 for PowerISA v3.10 */
+#define MMCR3_SHIFT(pmc) (49 - (15 * ((pmc) - 1)))
+
#define ISA207_SIER_TYPE_SHIFT 15
#define ISA207_SIER_TYPE_MASK (0x7ull << ISA207_SIER_TYPE_SHIFT)
diff --git a/arch/powerpc/perf/power10-events-list.h b/arch/powerpc/perf/power10-events-list.h
new file mode 100644
index 0000000..60c1b81
--- /dev/null
+++ b/arch/powerpc/perf/power10-events-list.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Performance counter support for POWER10 processors.
+ *
+ * Copyright 2020 Madhavan Srinivasan, IBM Corporation.
+ * Copyright 2020 Athira Rajeev, IBM Corporation.
+ */
+
+/*
+ * Power10 event codes.
+ */
+EVENT(PM_RUN_CYC, 0x600f4);
+EVENT(PM_DISP_STALL_CYC, 0x100f8);
+EVENT(PM_EXEC_STALL, 0x30008);
+EVENT(PM_RUN_INST_CMPL, 0x500fa);
+EVENT(PM_BR_CMPL, 0x4d05e);
+EVENT(PM_BR_MPRED_CMPL, 0x400f6);
+
+/* All L1 D cache load references counted at finish, gated by reject */
+EVENT(PM_LD_REF_L1, 0x100fc);
+/* Load Missed L1 */
+EVENT(PM_LD_MISS_L1, 0x3e054);
+/* Store Missed L1 */
+EVENT(PM_ST_MISS_L1, 0x300f0);
+/* L1 cache data prefetches */
+EVENT(PM_LD_PREFETCH_CACHE_LINE_MISS, 0x1002c);
+/* Demand iCache Miss */
+EVENT(PM_L1_ICACHE_MISS, 0x200fc);
+/* Instruction fetches from L1 */
+EVENT(PM_INST_FROM_L1, 0x04080);
+/* Instruction Demand sectors wriittent into IL1 */
+EVENT(PM_INST_FROM_L1MISS, 0x03f00000001c040);
+/* Instruction prefetch written into IL1 */
+EVENT(PM_IC_PREF_REQ, 0x040a0);
+/* The data cache was reloaded from local core's L3 due to a demand load */
+EVENT(PM_DATA_FROM_L3, 0x01340000001c040);
+/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
+EVENT(PM_DATA_FROM_L3MISS, 0x300fe);
+/* Data PTEG reload */
+EVENT(PM_DTLB_MISS, 0x300fc);
+/* ITLB Reloaded */
+EVENT(PM_ITLB_MISS, 0x400fc);
+
+EVENT(PM_RUN_CYC_ALT, 0x0001e);
+EVENT(PM_RUN_INST_CMPL_ALT, 0x00002);
+
+/*
+ * Memory Access Events
+ *
+ * Primary PMU event used here is PM_MRK_INST_CMPL (0x401e0)
+ * To enable capturing of memory profiling, these MMCRA bits
+ * needs to be programmed and corresponding raw event format
+ * encoding.
+ *
+ * MMCRA bits encoding needed are
+ * SM (Sampling Mode)
+ * EM (Eligibility for Random Sampling)
+ * TECE (Threshold Event Counter Event)
+ * TS (Threshold Start Event)
+ * TE (Threshold End Event)
+ *
+ * Corresponding Raw Encoding bits:
+ * sample [EM,SM]
+ * thresh_sel (TECE)
+ * thresh start (TS)
+ * thresh end (TE)
+ */
+
+EVENT(MEM_LOADS, 0x34340401e0);
+EVENT(MEM_STORES, 0x343c0401e0);
diff --git a/arch/powerpc/perf/power10-pmu.c b/arch/powerpc/perf/power10-pmu.c
new file mode 100644
index 0000000..ba19f40
--- /dev/null
+++ b/arch/powerpc/perf/power10-pmu.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Performance counter support for POWER10 processors.
+ *
+ * Copyright 2020 Madhavan Srinivasan, IBM Corporation.
+ * Copyright 2020 Athira Rajeev, IBM Corporation.
+ */
+
+#define pr_fmt(fmt) "power10-pmu: " fmt
+
+#include "isa207-common.h"
+#include "internal.h"
+
+/*
+ * Raw event encoding for Power10:
+ *
+ * 60 56 52 48 44 40 36 32
+ * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - |
+ * | | [ ] [ src_match ] [ src_mask ] | [ ] [ l2l3_sel ] [ thresh_ctl ]
+ * | | | | | |
+ * | | *- IFM (Linux) | | thresh start/stop -*
+ * | *- BHRB (Linux) | src_sel
+ * *- EBB (Linux) *invert_bit
+ *
+ * 28 24 20 16 12 8 4 0
+ * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - |
+ * [ ] [ sample ] [ ] [ ] [ pmc ] [unit ] [ ] m [ pmcxsel ]
+ * | | | | | |
+ * | | | | | *- mark
+ * | | | *- L1/L2/L3 cache_sel |
+ * | | sdar_mode |
+ * | *- sampling mode for marked events *- combine
+ * |
+ * *- thresh_sel
+ *
+ * Below uses IBM bit numbering.
+ *
+ * MMCR1[x:y] = unit (PMCxUNIT)
+ * MMCR1[24] = pmc1combine[0]
+ * MMCR1[25] = pmc1combine[1]
+ * MMCR1[26] = pmc2combine[0]
+ * MMCR1[27] = pmc2combine[1]
+ * MMCR1[28] = pmc3combine[0]
+ * MMCR1[29] = pmc3combine[1]
+ * MMCR1[30] = pmc4combine[0]
+ * MMCR1[31] = pmc4combine[1]
+ *
+ * if pmc == 3 and unit == 0 and pmcxsel[0:6] == 0b0101011
+ * MMCR1[20:27] = thresh_ctl
+ * else if pmc == 4 and unit == 0xf and pmcxsel[0:6] == 0b0101001
+ * MMCR1[20:27] = thresh_ctl
+ * else
+ * MMCRA[48:55] = thresh_ctl (THRESH START/END)
+ *
+ * if thresh_sel:
+ * MMCRA[45:47] = thresh_sel
+ *
+ * if l2l3_sel:
+ * MMCR2[56:60] = l2l3_sel[0:4]
+ *
+ * MMCR1[16] = cache_sel[0]
+ * MMCR1[17] = cache_sel[1]
+ *
+ * if mark:
+ * MMCRA[63] = 1 (SAMPLE_ENABLE)
+ * MMCRA[57:59] = sample[0:2] (RAND_SAMP_ELIG)
+ * MMCRA[61:62] = sample[3:4] (RAND_SAMP_MODE)
+ *
+ * if EBB and BHRB:
+ * MMCRA[32:33] = IFM
+ *
+ * MMCRA[SDAR_MODE] = sdar_mode[0:1]
+ */
+
+/*
+ * Some power10 event codes.
+ */
+#define EVENT(_name, _code) enum{_name = _code}
+
+#include "power10-events-list.h"
+
+#undef EVENT
+
+/* MMCRA IFM bits - POWER10 */
+#define POWER10_MMCRA_IFM1 0x0000000040000000UL
+#define POWER10_MMCRA_BHRB_MASK 0x00000000C0000000UL
+
+/* Table of alternatives, sorted by column 0 */
+static const unsigned int power10_event_alternatives[][MAX_ALT] = {
+ { PM_RUN_CYC_ALT, PM_RUN_CYC },
+ { PM_RUN_INST_CMPL_ALT, PM_RUN_INST_CMPL },
+};
+
+static int power10_get_alternatives(u64 event, unsigned int flags, u64 alt[])
+{
+ int num_alt = 0;
+
+ num_alt = isa207_get_alternatives(event, alt,
+ ARRAY_SIZE(power10_event_alternatives), flags,
+ power10_event_alternatives);
+
+ return num_alt;
+}
+
+GENERIC_EVENT_ATTR(cpu-cycles, PM_RUN_CYC);
+GENERIC_EVENT_ATTR(instructions, PM_RUN_INST_CMPL);
+GENERIC_EVENT_ATTR(branch-instructions, PM_BR_CMPL);
+GENERIC_EVENT_ATTR(branch-misses, PM_BR_MPRED_CMPL);
+GENERIC_EVENT_ATTR(cache-references, PM_LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses, PM_LD_MISS_L1);
+GENERIC_EVENT_ATTR(mem-loads, MEM_LOADS);
+GENERIC_EVENT_ATTR(mem-stores, MEM_STORES);
+
+CACHE_EVENT_ATTR(L1-dcache-load-misses, PM_LD_MISS_L1);
+CACHE_EVENT_ATTR(L1-dcache-loads, PM_LD_REF_L1);
+CACHE_EVENT_ATTR(L1-dcache-prefetches, PM_LD_PREFETCH_CACHE_LINE_MISS);
+CACHE_EVENT_ATTR(L1-dcache-store-misses, PM_ST_MISS_L1);
+CACHE_EVENT_ATTR(L1-icache-load-misses, PM_L1_ICACHE_MISS);
+CACHE_EVENT_ATTR(L1-icache-loads, PM_INST_FROM_L1);
+CACHE_EVENT_ATTR(L1-icache-prefetches, PM_IC_PREF_REQ);
+CACHE_EVENT_ATTR(LLC-load-misses, PM_DATA_FROM_L3MISS);
+CACHE_EVENT_ATTR(LLC-loads, PM_DATA_FROM_L3);
+CACHE_EVENT_ATTR(branch-load-misses, PM_BR_MPRED_CMPL);
+CACHE_EVENT_ATTR(branch-loads, PM_BR_CMPL);
+CACHE_EVENT_ATTR(dTLB-load-misses, PM_DTLB_MISS);
+CACHE_EVENT_ATTR(iTLB-load-misses, PM_ITLB_MISS);
+
+static struct attribute *power10_events_attr[] = {
+ GENERIC_EVENT_PTR(PM_RUN_CYC),
+ GENERIC_EVENT_PTR(PM_RUN_INST_CMPL),
+ GENERIC_EVENT_PTR(PM_BR_CMPL),
+ GENERIC_EVENT_PTR(PM_BR_MPRED_CMPL),
+ GENERIC_EVENT_PTR(PM_LD_REF_L1),
+ GENERIC_EVENT_PTR(PM_LD_MISS_L1),
+ GENERIC_EVENT_PTR(MEM_LOADS),
+ GENERIC_EVENT_PTR(MEM_STORES),
+ CACHE_EVENT_PTR(PM_LD_MISS_L1),
+ CACHE_EVENT_PTR(PM_LD_REF_L1),
+ CACHE_EVENT_PTR(PM_LD_PREFETCH_CACHE_LINE_MISS),
+ CACHE_EVENT_PTR(PM_ST_MISS_L1),
+ CACHE_EVENT_PTR(PM_L1_ICACHE_MISS),
+ CACHE_EVENT_PTR(PM_INST_FROM_L1),
+ CACHE_EVENT_PTR(PM_IC_PREF_REQ),
+ CACHE_EVENT_PTR(PM_DATA_FROM_L3MISS),
+ CACHE_EVENT_PTR(PM_DATA_FROM_L3),
+ CACHE_EVENT_PTR(PM_BR_MPRED_CMPL),
+ CACHE_EVENT_PTR(PM_BR_CMPL),
+ CACHE_EVENT_PTR(PM_DTLB_MISS),
+ CACHE_EVENT_PTR(PM_ITLB_MISS),
+ NULL
+};
+
+static struct attribute_group power10_pmu_events_group = {
+ .name = "events",
+ .attrs = power10_events_attr,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-59");
+PMU_FORMAT_ATTR(pmcxsel, "config:0-7");
+PMU_FORMAT_ATTR(mark, "config:8");
+PMU_FORMAT_ATTR(combine, "config:10-11");
+PMU_FORMAT_ATTR(unit, "config:12-15");
+PMU_FORMAT_ATTR(pmc, "config:16-19");
+PMU_FORMAT_ATTR(cache_sel, "config:20-21");
+PMU_FORMAT_ATTR(sdar_mode, "config:22-23");
+PMU_FORMAT_ATTR(sample_mode, "config:24-28");
+PMU_FORMAT_ATTR(thresh_sel, "config:29-31");
+PMU_FORMAT_ATTR(thresh_stop, "config:32-35");
+PMU_FORMAT_ATTR(thresh_start, "config:36-39");
+PMU_FORMAT_ATTR(l2l3_sel, "config:40-44");
+PMU_FORMAT_ATTR(src_sel, "config:45-46");
+PMU_FORMAT_ATTR(invert_bit, "config:47");
+PMU_FORMAT_ATTR(src_mask, "config:48-53");
+PMU_FORMAT_ATTR(src_match, "config:54-59");
+
+static struct attribute *power10_pmu_format_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_pmcxsel.attr,
+ &format_attr_mark.attr,
+ &format_attr_combine.attr,
+ &format_attr_unit.attr,
+ &format_attr_pmc.attr,
+ &format_attr_cache_sel.attr,
+ &format_attr_sdar_mode.attr,
+ &format_attr_sample_mode.attr,
+ &format_attr_thresh_sel.attr,
+ &format_attr_thresh_stop.attr,
+ &format_attr_thresh_start.attr,
+ &format_attr_l2l3_sel.attr,
+ &format_attr_src_sel.attr,
+ &format_attr_invert_bit.attr,
+ &format_attr_src_mask.attr,
+ &format_attr_src_match.attr,
+ NULL,
+};
+
+static struct attribute_group power10_pmu_format_group = {
+ .name = "format",
+ .attrs = power10_pmu_format_attr,
+};
+
+static const struct attribute_group *power10_pmu_attr_groups[] = {
+ &power10_pmu_format_group,
+ &power10_pmu_events_group,
+ NULL,
+};
+
+static int power10_generic_events[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = PM_RUN_CYC,
+ [PERF_COUNT_HW_INSTRUCTIONS] = PM_RUN_INST_CMPL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BR_CMPL,
+ [PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1,
+};
+
+static u64 power10_bhrb_filter_map(u64 branch_sample_type)
+{
+ u64 pmu_bhrb_filter = 0;
+
+ /* BHRB and regular PMU events share the same privilege state
+ * filter configuration. BHRB is always recorded along with a
+ * regular PMU event. As the privilege state filter is handled
+ * in the basic PMC configuration of the accompanying regular
+ * PMU event, we ignore any separate BHRB specific request.
+ */
+
+ /* No branch filter requested */
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY)
+ return pmu_bhrb_filter;
+
+ /* Invalid branch filter options - HW does not support */
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
+ return -1;
+
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_IND_CALL)
+ return -1;
+
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_CALL)
+ return -1;
+
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY_CALL) {
+ pmu_bhrb_filter |= POWER10_MMCRA_IFM1;
+ return pmu_bhrb_filter;
+ }
+
+ /* Every thing else is unsupported */
+ return -1;
+}
+
+static void power10_config_bhrb(u64 pmu_bhrb_filter)
+{
+ pmu_bhrb_filter &= POWER10_MMCRA_BHRB_MASK;
+
+ /* Enable BHRB filter in PMU */
+ mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
+}
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static u64 power10_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = PM_LD_REF_L1,
+ [C(RESULT_MISS)] = PM_LD_MISS_L1,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = PM_ST_MISS_L1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = PM_LD_PREFETCH_CACHE_LINE_MISS,
+ [C(RESULT_MISS)] = 0,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = PM_INST_FROM_L1,
+ [C(RESULT_MISS)] = PM_L1_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = PM_INST_FROM_L1MISS,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = PM_IC_PREF_REQ,
+ [C(RESULT_MISS)] = 0,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = PM_DATA_FROM_L3,
+ [C(RESULT_MISS)] = PM_DATA_FROM_L3MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = 0,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = PM_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0,
+ [C(RESULT_MISS)] = PM_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = PM_BR_CMPL,
+ [C(RESULT_MISS)] = PM_BR_MPRED_CMPL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+};
+
+#undef C
+
+static struct power_pmu power10_pmu = {
+ .name = "POWER10",
+ .n_counter = MAX_PMU_COUNTERS,
+ .add_fields = ISA207_ADD_FIELDS,
+ .test_adder = ISA207_TEST_ADDER,
+ .group_constraint_mask = CNST_CACHE_PMC4_MASK,
+ .group_constraint_val = CNST_CACHE_PMC4_VAL,
+ .compute_mmcr = isa207_compute_mmcr,
+ .config_bhrb = power10_config_bhrb,
+ .bhrb_filter_map = power10_bhrb_filter_map,
+ .get_constraint = isa207_get_constraint,
+ .get_alternatives = power10_get_alternatives,
+ .get_mem_data_src = isa207_get_mem_data_src,
+ .get_mem_weight = isa207_get_mem_weight,
+ .disable_pmc = isa207_disable_pmc,
+ .flags = PPMU_HAS_SIER | PPMU_ARCH_207S |
+ PPMU_ARCH_310S,
+ .n_generic = ARRAY_SIZE(power10_generic_events),
+ .generic_events = power10_generic_events,
+ .cache_events = &power10_cache_events,
+ .attr_groups = power10_pmu_attr_groups,
+ .bhrb_nr = 32,
+};
+
+int init_power10_pmu(void)
+{
+ int rc;
+
+ /* Comes from cpu_specs[] */
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power10"))
+ return -ENODEV;
+
+ rc = register_power_pmu(&power10_pmu);
+ if (rc)
+ return rc;
+
+ /* Tell userspace that EBB is supported */
+ cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB;
+
+ return 0;
+}
--
1.8.3.1
^ permalink raw reply related
* [v3 09/15] powerpc/perf: Ignore the BHRB kernel address filtering for P10
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
commit bb19af816025 ("powerpc/perf: Prevent kernel address leak to
userspace via BHRB buffer") added a check in bhrb_read() to filter
the kernel address from BHRB buffer. This patch modified it to avoid
that check for PowerISA v3.1 based processors, since PowerISA v3.1
allows only MSR[PR]=1 address to be written to BHRB buffer.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/perf/core-book3s.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 0ffb757d..bd125fe 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -469,8 +469,11 @@ static void power_pmu_bhrb_read(struct perf_event *event, struct cpu_hw_events *
* addresses at this point. Check the privileges before
* exporting it to userspace (avoid exposure of regions
* where we could have speculative execution)
+ * Incase of ISA v3.1, BHRB will capture only user-space
+ * addresses, hence include a check before filtering code
*/
- if (is_kernel_addr(addr) && perf_allow_kernel(&event->attr) != 0)
+ if (!(ppmu->flags & PPMU_ARCH_310S) &&
+ is_kernel_addr(addr) && perf_allow_kernel(&event->attr) != 0)
continue;
/* Branches are read most recent first (ie. mfbhrb 0 is
--
1.8.3.1
^ permalink raw reply related
* [v3 10/15] powerpc/perf: Add Power10 BHRB filter support for PERF_SAMPLE_BRANCH_IND_CALL/COND
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
PowerISA v3.1 introduce filtering support for
PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter
support for "ind_call" and "cond" in power10_bhrb_filter_map().
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/perf/power10-pmu.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/perf/power10-pmu.c b/arch/powerpc/perf/power10-pmu.c
index ba19f40..b02aabb 100644
--- a/arch/powerpc/perf/power10-pmu.c
+++ b/arch/powerpc/perf/power10-pmu.c
@@ -83,6 +83,8 @@
/* MMCRA IFM bits - POWER10 */
#define POWER10_MMCRA_IFM1 0x0000000040000000UL
+#define POWER10_MMCRA_IFM2 0x0000000080000000UL
+#define POWER10_MMCRA_IFM3 0x00000000C0000000UL
#define POWER10_MMCRA_BHRB_MASK 0x00000000C0000000UL
/* Table of alternatives, sorted by column 0 */
@@ -233,8 +235,15 @@ static u64 power10_bhrb_filter_map(u64 branch_sample_type)
if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
return -1;
- if (branch_sample_type & PERF_SAMPLE_BRANCH_IND_CALL)
- return -1;
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_IND_CALL) {
+ pmu_bhrb_filter |= POWER10_MMCRA_IFM2;
+ return pmu_bhrb_filter;
+ }
+
+ if (branch_sample_type & PERF_SAMPLE_BRANCH_COND) {
+ pmu_bhrb_filter |= POWER10_MMCRA_IFM3;
+ return pmu_bhrb_filter;
+ }
if (branch_sample_type & PERF_SAMPLE_BRANCH_CALL)
return -1;
--
1.8.3.1
^ permalink raw reply related
* [v3 11/15] powerpc/perf: BHRB control to disable BHRB logic when not used
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB).
BHRB disable is controlled via Monitor Mode Control Register A (MMCRA)
bit, namely "BHRB Recording Disable (BHRBRD)". This field controls
whether BHRB entries are written when BHRB recording is enabled by other
bits. This patch implements support for this BHRB disable bit.
By setting 0b1 to this bit will disable the BHRB and by setting 0b0
to this bit will have BHRB enabled. This addresses backward
compatibility (for older OS), since this bit will be cleared and
hardware will be writing to BHRB by default.
This patch addresses changes to set MMCRA (BHRBRD) at boot for power10
( there by the core will run faster) and enable this feature only on
runtime ie, on explicit need from user. Also save/restore MMCRA in the
restore path of state-loss idle state to make sure we keep BHRB disabled
if it was not enabled on request at runtime.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
arch/powerpc/perf/core-book3s.c | 20 ++++++++++++++++----
arch/powerpc/perf/isa207-common.c | 12 ++++++++++++
arch/powerpc/platforms/powernv/idle.c | 22 ++++++++++++++++++++--
3 files changed, 48 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index bd125fe..31c0535 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1218,7 +1218,7 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0)
static void power_pmu_disable(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw;
- unsigned long flags, mmcr0, val;
+ unsigned long flags, mmcr0, val, mmcra;
if (!ppmu)
return;
@@ -1251,12 +1251,24 @@ static void power_pmu_disable(struct pmu *pmu)
mb();
isync();
+ val = mmcra = cpuhw->mmcr.mmcra;
+
/*
* Disable instruction sampling if it was enabled
*/
- if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE) {
- mtspr(SPRN_MMCRA,
- cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
+ if (cpuhw->mmcr.mmcra & MMCRA_SAMPLE_ENABLE)
+ val &= ~MMCRA_SAMPLE_ENABLE;
+
+ /* Disable BHRB via mmcra (BHRBRD) for p10 */
+ if (ppmu->flags & PPMU_ARCH_310S)
+ val |= MMCRA_BHRB_DISABLE;
+
+ /*
+ * Write SPRN_MMCRA if mmcra has either disabled
+ * instruction sampling or BHRB.
+ */
+ if (val != mmcra) {
+ mtspr(SPRN_MMCRA, mmcra);
mb();
isync();
}
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 77643f3..964437a 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -404,6 +404,13 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
mmcra = mmcr1 = mmcr2 = mmcr3 = 0;
+ /*
+ * Disable bhrb unless explicitly requested
+ * by setting MMCRA (BHRBRD) bit.
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ mmcra |= MMCRA_BHRB_DISABLE;
+
/* Second pass: assign PMCs, set all MMCR1 fields */
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
@@ -479,6 +486,11 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
mmcra |= val << MMCRA_IFM_SHIFT;
}
+ /* set MMCRA (BHRBRD) to 0 if there is user request for BHRB */
+ if (cpu_has_feature(CPU_FTR_ARCH_31) &&
+ (has_branch_stack(pevents[i]) || (event[i] & EVENT_WANTS_BHRB)))
+ mmcra &= ~MMCRA_BHRB_DISABLE;
+
if (pevents[i]->attr.exclude_user)
mmcr2 |= MMCR2_FCP(pmc);
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 2dd4673..1c9d0a9 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -611,6 +611,7 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
unsigned long srr1;
unsigned long pls;
unsigned long mmcr0 = 0;
+ unsigned long mmcra = 0;
struct p9_sprs sprs = {}; /* avoid false used-uninitialised */
bool sprs_saved = false;
@@ -657,6 +658,21 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
*/
mmcr0 = mfspr(SPRN_MMCR0);
}
+
+ if (cpu_has_feature(CPU_FTR_ARCH_31)) {
+ /*
+ * POWER10 uses MMCRA (BHRBRD) as BHRB disable bit.
+ * If the user hasn't asked for the BHRB to be
+ * written, the value of MMCRA[BHRBRD] is 1.
+ * On wakeup from stop, MMCRA[BHRBD] will be 0,
+ * since it is previleged resource and will be lost.
+ * Thus, if we do not save and restore the MMCRA[BHRBD],
+ * hardware will be needlessly writing to the BHRB
+ * in problem mode.
+ */
+ mmcra = mfspr(SPRN_MMCRA);
+ }
+
if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
sprs.lpcr = mfspr(SPRN_LPCR);
sprs.hfscr = mfspr(SPRN_HFSCR);
@@ -700,8 +716,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
WARN_ON_ONCE(mfmsr() & (MSR_IR|MSR_DR));
if ((srr1 & SRR1_WAKESTATE) != SRR1_WS_NOLOSS) {
- unsigned long mmcra;
-
/*
* We don't need an isync after the mtsprs here because the
* upcoming mtmsrd is execution synchronizing.
@@ -721,6 +735,10 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
mtspr(SPRN_MMCR0, mmcr0);
}
+ /* Reload MMCRA to restore BHRB disable bit for POWER10 */
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ mtspr(SPRN_MMCRA, mmcra);
+
/*
* DD2.2 and earlier need to set then clear bit 60 in MMCRA
* to ensure the PMU starts running.
--
1.8.3.1
^ permalink raw reply related
* [v3 12/15] powerpc/perf: Add support for outputting extended regs in perf intr_regs
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
From: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Add support for perf extended register capability in powerpc.
The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the
PMU which support extended registers. The generic code define the mask
of extended registers as 0 for non supported architectures.
Patch adds extended regs support for power9 platform by
exposing MMCR0, MMCR1 and MMCR2 registers.
REG_RESERVED mask needs update to include extended regs.
`PERF_REG_EXTENDED_MASK`, contains mask value of the supported registers,
is defined at runtime in the kernel based on platform since the supported
registers may differ from one processor version to another and hence the
MASK value.
with patch
----------
available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11
r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26
r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe
trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2
PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0
... intr regs: mask 0xffffffffffff ABI 64-bit
.... r0 0xc00000000012b77c
.... r1 0xc000003fe5e03930
.... r2 0xc000000001b0e000
.... r3 0xc000003fdcddf800
.... r4 0xc000003fc7880000
.... r5 0x9c422724be
.... r6 0xc000003fe5e03908
.... r7 0xffffff63bddc8706
.... r8 0x9e4
.... r9 0x0
.... r10 0x1
.... r11 0x0
.... r12 0xc0000000001299c0
.... r13 0xc000003ffffc4800
.... r14 0x0
.... r15 0x7fffdd8b8b00
.... r16 0x0
.... r17 0x7fffdd8be6b8
.... r18 0x7e7076607730
.... r19 0x2f
.... r20 0xc00000001fc26c68
.... r21 0xc0002041e4227e00
.... r22 0xc00000002018fb60
.... r23 0x1
.... r24 0xc000003ffec4d900
.... r25 0x80000000
.... r26 0x0
.... r27 0x1
.... r28 0x1
.... r29 0xc000000001be1260
.... r30 0x6008010
.... r31 0xc000003ffebb7218
.... nip 0xc00000000012b910
.... msr 0x9000000000009033
.... orig_r3 0xc00000000012b86c
.... ctr 0xc0000000001299c0
.... link 0xc00000000012b77c
.... xer 0x0
.... ccr 0x28002222
.... softe 0x1
.... trap 0xf00
.... dar 0x0
.... dsisr 0x80000000000
.... sier 0x0
.... mmcra 0x80000000000
.... mmcr0 0x82008090
.... mmcr1 0x1e000000
.... mmcr2 0x0
... thread: perf:4784
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
[Defined PERF_REG_EXTENDED_MASK at run time to add support for different platforms ]
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/perf_event_server.h | 8 +++++++
arch/powerpc/include/uapi/asm/perf_regs.h | 14 +++++++++++-
arch/powerpc/perf/core-book3s.c | 1 +
arch/powerpc/perf/perf_regs.c | 34 +++++++++++++++++++++++++---
arch/powerpc/perf/power9-pmu.c | 6 +++++
5 files changed, 59 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 832450a..bf85d1a 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -15,6 +15,9 @@
#define MAX_EVENT_ALTERNATIVES 8
#define MAX_LIMITED_HWCOUNTERS 2
+extern u64 PERF_REG_EXTENDED_MASK;
+#define PERF_REG_EXTENDED_MASK PERF_REG_EXTENDED_MASK
+
struct perf_event;
struct mmcr_regs {
@@ -62,6 +65,11 @@ struct power_pmu {
int *blacklist_ev;
/* BHRB entries in the PMU */
int bhrb_nr;
+ /*
+ * set this flag with `PERF_PMU_CAP_EXTENDED_REGS` if
+ * the pmu supports extended perf regs capability
+ */
+ int capabilities;
};
/*
diff --git a/arch/powerpc/include/uapi/asm/perf_regs.h b/arch/powerpc/include/uapi/asm/perf_regs.h
index f599064..225c64c 100644
--- a/arch/powerpc/include/uapi/asm/perf_regs.h
+++ b/arch/powerpc/include/uapi/asm/perf_regs.h
@@ -48,6 +48,18 @@ enum perf_event_powerpc_regs {
PERF_REG_POWERPC_DSISR,
PERF_REG_POWERPC_SIER,
PERF_REG_POWERPC_MMCRA,
- PERF_REG_POWERPC_MAX,
+ /* Extended registers */
+ PERF_REG_POWERPC_MMCR0,
+ PERF_REG_POWERPC_MMCR1,
+ PERF_REG_POWERPC_MMCR2,
+ /* Max regs without the extended regs */
+ PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
};
+
+#define PERF_REG_PMU_MASK ((1ULL << PERF_REG_POWERPC_MAX) - 1)
+
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
+#define PERF_REG_PMU_MASK_300 (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
+
+#define PERF_REG_MAX_ISA_300 (PERF_REG_POWERPC_MMCR2 + 1)
#endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 31c0535..d5a9529 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2316,6 +2316,7 @@ int register_power_pmu(struct power_pmu *pmu)
pmu->name);
power_pmu.attr_groups = ppmu->attr_groups;
+ power_pmu.capabilities |= (ppmu->capabilities & PERF_PMU_CAP_EXTENDED_REGS);
#ifdef MSR_HV
/*
diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c
index a213a0a..b0cf68f 100644
--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@@ -13,9 +13,11 @@
#include <asm/ptrace.h>
#include <asm/perf_regs.h>
+u64 PERF_REG_EXTENDED_MASK;
+
#define PT_REGS_OFFSET(id, r) [id] = offsetof(struct pt_regs, r)
-#define REG_RESERVED (~((1ULL << PERF_REG_POWERPC_MAX) - 1))
+#define REG_RESERVED (~(PERF_REG_EXTENDED_MASK | PERF_REG_PMU_MASK))
static unsigned int pt_regs_offset[PERF_REG_POWERPC_MAX] = {
PT_REGS_OFFSET(PERF_REG_POWERPC_R0, gpr[0]),
@@ -69,10 +71,26 @@
PT_REGS_OFFSET(PERF_REG_POWERPC_MMCRA, dsisr),
};
+/* Function to return the extended register values */
+static u64 get_ext_regs_value(int idx)
+{
+ switch (idx) {
+ case PERF_REG_POWERPC_MMCR0:
+ return mfspr(SPRN_MMCR0);
+ case PERF_REG_POWERPC_MMCR1:
+ return mfspr(SPRN_MMCR1);
+ case PERF_REG_POWERPC_MMCR2:
+ return mfspr(SPRN_MMCR2);
+ default: return 0;
+ }
+}
+
u64 perf_reg_value(struct pt_regs *regs, int idx)
{
- if (WARN_ON_ONCE(idx >= PERF_REG_POWERPC_MAX))
- return 0;
+ u64 PERF_REG_EXTENDED_MAX;
+
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ PERF_REG_EXTENDED_MAX = PERF_REG_MAX_ISA_300;
if (idx == PERF_REG_POWERPC_SIER &&
(IS_ENABLED(CONFIG_FSL_EMB_PERF_EVENT) ||
@@ -85,6 +103,16 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
IS_ENABLED(CONFIG_PPC32)))
return 0;
+ if (idx >= PERF_REG_POWERPC_MAX && idx < PERF_REG_EXTENDED_MAX)
+ return get_ext_regs_value(idx);
+
+ /*
+ * If the idx is referring to value beyond the
+ * supported registers, return 0 with a warning
+ */
+ if (WARN_ON_ONCE(idx >= PERF_REG_EXTENDED_MAX))
+ return 0;
+
return regs_get_register(regs, pt_regs_offset[idx]);
}
diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index 05dae38..2a57e93 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -90,6 +90,8 @@ enum {
#define POWER9_MMCRA_IFM3 0x00000000C0000000UL
#define POWER9_MMCRA_BHRB_MASK 0x00000000C0000000UL
+extern u64 PERF_REG_EXTENDED_MASK;
+
/* Nasty Power9 specific hack */
#define PVR_POWER9_CUMULUS 0x00002000
@@ -434,6 +436,7 @@ static void power9_config_bhrb(u64 pmu_bhrb_filter)
.cache_events = &power9_cache_events,
.attr_groups = power9_pmu_attr_groups,
.bhrb_nr = 32,
+ .capabilities = PERF_PMU_CAP_EXTENDED_REGS,
};
int init_power9_pmu(void)
@@ -457,6 +460,9 @@ int init_power9_pmu(void)
}
}
+ /* Set the PERF_REG_EXTENDED_MASK here */
+ PERF_REG_EXTENDED_MASK = PERF_REG_PMU_MASK_300;
+
rc = register_power_pmu(&power9_pmu);
if (rc)
return rc;
--
1.8.3.1
^ permalink raw reply related
* [v3 14/15] powerpc/perf: Add extended regs support for power10 platform
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
Include capability flag `PERF_PMU_CAP_EXTENDED_REGS` for power10
and expose MMCR3, SIER2, SIER3 registers as part of extended regs.
Also introduce `PERF_REG_PMU_MASK_31` to define extended mask
value at runtime for power10
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[Fix build failure on PPC32 platform]
Suggested-by: Ryan Grimm <grimm@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
---
arch/powerpc/include/uapi/asm/perf_regs.h | 6 ++++++
arch/powerpc/perf/perf_regs.c | 12 +++++++++++-
arch/powerpc/perf/power10-pmu.c | 6 ++++++
3 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/uapi/asm/perf_regs.h b/arch/powerpc/include/uapi/asm/perf_regs.h
index 225c64c..bdf5f10 100644
--- a/arch/powerpc/include/uapi/asm/perf_regs.h
+++ b/arch/powerpc/include/uapi/asm/perf_regs.h
@@ -52,6 +52,9 @@ enum perf_event_powerpc_regs {
PERF_REG_POWERPC_MMCR0,
PERF_REG_POWERPC_MMCR1,
PERF_REG_POWERPC_MMCR2,
+ PERF_REG_POWERPC_MMCR3,
+ PERF_REG_POWERPC_SIER2,
+ PERF_REG_POWERPC_SIER3,
/* Max regs without the extended regs */
PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
};
@@ -60,6 +63,9 @@ enum perf_event_powerpc_regs {
/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
#define PERF_REG_PMU_MASK_300 (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_31 */
+#define PERF_REG_PMU_MASK_31 (((1ULL << (PERF_REG_POWERPC_SIER3 + 1)) - 1) - PERF_REG_PMU_MASK)
#define PERF_REG_MAX_ISA_300 (PERF_REG_POWERPC_MMCR2 + 1)
+#define PERF_REG_MAX_ISA_31 (PERF_REG_POWERPC_SIER3 + 1)
#endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c
index b0cf68f..11b90d5 100644
--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@@ -81,6 +81,14 @@ static u64 get_ext_regs_value(int idx)
return mfspr(SPRN_MMCR1);
case PERF_REG_POWERPC_MMCR2:
return mfspr(SPRN_MMCR2);
+#ifdef CONFIG_PPC64
+ case PERF_REG_POWERPC_MMCR3:
+ return mfspr(SPRN_MMCR3);
+ case PERF_REG_POWERPC_SIER2:
+ return mfspr(SPRN_SIER2);
+ case PERF_REG_POWERPC_SIER3:
+ return mfspr(SPRN_SIER3);
+#endif
default: return 0;
}
}
@@ -89,7 +97,9 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
{
u64 PERF_REG_EXTENDED_MAX;
- if (cpu_has_feature(CPU_FTR_ARCH_300))
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ PERF_REG_EXTENDED_MAX = PERF_REG_MAX_ISA_31;
+ else if (cpu_has_feature(CPU_FTR_ARCH_300))
PERF_REG_EXTENDED_MAX = PERF_REG_MAX_ISA_300;
if (idx == PERF_REG_POWERPC_SIER &&
diff --git a/arch/powerpc/perf/power10-pmu.c b/arch/powerpc/perf/power10-pmu.c
index b02aabb..f066ed9 100644
--- a/arch/powerpc/perf/power10-pmu.c
+++ b/arch/powerpc/perf/power10-pmu.c
@@ -87,6 +87,8 @@
#define POWER10_MMCRA_IFM3 0x00000000C0000000UL
#define POWER10_MMCRA_BHRB_MASK 0x00000000C0000000UL
+extern u64 PERF_REG_EXTENDED_MASK;
+
/* Table of alternatives, sorted by column 0 */
static const unsigned int power10_event_alternatives[][MAX_ALT] = {
{ PM_RUN_CYC_ALT, PM_RUN_CYC },
@@ -397,6 +399,7 @@ static void power10_config_bhrb(u64 pmu_bhrb_filter)
.cache_events = &power10_cache_events,
.attr_groups = power10_pmu_attr_groups,
.bhrb_nr = 32,
+ .capabilities = PERF_PMU_CAP_EXTENDED_REGS,
};
int init_power10_pmu(void)
@@ -408,6 +411,9 @@ int init_power10_pmu(void)
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power10"))
return -ENODEV;
+ /* Set the PERF_REG_EXTENDED_MASK here */
+ PERF_REG_EXTENDED_MASK = PERF_REG_PMU_MASK_31;
+
rc = register_power_pmu(&power10_pmu);
if (rc)
return rc;
--
1.8.3.1
^ permalink raw reply related
* [v3 15/15] tools/perf: Add perf tools support for extended regs in power10
From: Athira Rajeev @ 2020-07-17 14:38 UTC (permalink / raw)
To: mpe; +Cc: ego, mikey, maddy, kvm, kvm-ppc, svaidyan, acme, jolsa,
linuxppc-dev
In-Reply-To: <1594996707-3727-1-git-send-email-atrajeev@linux.vnet.ibm.com>
Added support for supported regs which are new in power10
( MMCR3, SIER2, SIER3 ) to sample_reg_mask in the tool side
to use with `-I?` option. Also added PVR check to send extended
mask for power10 at kernel while capturing extended regs in
each sample.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
---
tools/arch/powerpc/include/uapi/asm/perf_regs.h | 6 ++++++
tools/perf/arch/powerpc/include/perf_regs.h | 3 +++
tools/perf/arch/powerpc/util/perf_regs.c | 6 ++++++
3 files changed, 15 insertions(+)
diff --git a/tools/arch/powerpc/include/uapi/asm/perf_regs.h b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
index 225c64c..bdf5f10 100644
--- a/tools/arch/powerpc/include/uapi/asm/perf_regs.h
+++ b/tools/arch/powerpc/include/uapi/asm/perf_regs.h
@@ -52,6 +52,9 @@ enum perf_event_powerpc_regs {
PERF_REG_POWERPC_MMCR0,
PERF_REG_POWERPC_MMCR1,
PERF_REG_POWERPC_MMCR2,
+ PERF_REG_POWERPC_MMCR3,
+ PERF_REG_POWERPC_SIER2,
+ PERF_REG_POWERPC_SIER3,
/* Max regs without the extended regs */
PERF_REG_POWERPC_MAX = PERF_REG_POWERPC_MMCRA + 1,
};
@@ -60,6 +63,9 @@ enum perf_event_powerpc_regs {
/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_300 */
#define PERF_REG_PMU_MASK_300 (((1ULL << (PERF_REG_POWERPC_MMCR2 + 1)) - 1) - PERF_REG_PMU_MASK)
+/* PERF_REG_EXTENDED_MASK value for CPU_FTR_ARCH_31 */
+#define PERF_REG_PMU_MASK_31 (((1ULL << (PERF_REG_POWERPC_SIER3 + 1)) - 1) - PERF_REG_PMU_MASK)
#define PERF_REG_MAX_ISA_300 (PERF_REG_POWERPC_MMCR2 + 1)
+#define PERF_REG_MAX_ISA_31 (PERF_REG_POWERPC_SIER3 + 1)
#endif /* _UAPI_ASM_POWERPC_PERF_REGS_H */
diff --git a/tools/perf/arch/powerpc/include/perf_regs.h b/tools/perf/arch/powerpc/include/perf_regs.h
index 46ed00d..63f3ac9 100644
--- a/tools/perf/arch/powerpc/include/perf_regs.h
+++ b/tools/perf/arch/powerpc/include/perf_regs.h
@@ -68,6 +68,9 @@
[PERF_REG_POWERPC_MMCR0] = "mmcr0",
[PERF_REG_POWERPC_MMCR1] = "mmcr1",
[PERF_REG_POWERPC_MMCR2] = "mmcr2",
+ [PERF_REG_POWERPC_MMCR3] = "mmcr3",
+ [PERF_REG_POWERPC_SIER2] = "sier2",
+ [PERF_REG_POWERPC_SIER3] = "sier3",
};
static inline const char *perf_reg_name(int id)
diff --git a/tools/perf/arch/powerpc/util/perf_regs.c b/tools/perf/arch/powerpc/util/perf_regs.c
index d64ba0c..2b6d470 100644
--- a/tools/perf/arch/powerpc/util/perf_regs.c
+++ b/tools/perf/arch/powerpc/util/perf_regs.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#define PVR_POWER9 0x004E
+#define PVR_POWER10 0x0080
const struct sample_reg sample_reg_masks[] = {
SMPL_REG(r0, PERF_REG_POWERPC_R0),
@@ -64,6 +65,9 @@
SMPL_REG(mmcr0, PERF_REG_POWERPC_MMCR0),
SMPL_REG(mmcr1, PERF_REG_POWERPC_MMCR1),
SMPL_REG(mmcr2, PERF_REG_POWERPC_MMCR2),
+ SMPL_REG(mmcr3, PERF_REG_POWERPC_MMCR3),
+ SMPL_REG(sier2, PERF_REG_POWERPC_SIER2),
+ SMPL_REG(sier3, PERF_REG_POWERPC_SIER3),
SMPL_REG_END
};
@@ -194,6 +198,8 @@ uint64_t arch__intr_reg_mask(void)
version = (((mfspr(SPRN_PVR)) >> 16) & 0xFFFF);
if (version == PVR_POWER9)
extended_mask = PERF_REG_PMU_MASK_300;
+ else if (version == PVR_POWER10)
+ extended_mask = PERF_REG_PMU_MASK_31;
else
return mask;
--
1.8.3.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox