* Re: [PATCH 0/9] Macintosh II ADB driver fixes
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: Finn Thain, Benjamin Herrenschmidt
Cc: Laurent Vivier, Mark Cave-Ayland, linux-kernel, linux-m68k,
Geert Uytterhoeven, linuxppc-dev, Joshua Thompson
In-Reply-To: <cover.1593318192.git.fthain@telegraphics.com.au>
On Sun, 28 Jun 2020 14:23:12 +1000, Finn Thain wrote:
> Various issues with the via-macii driver have become apparent over the
> years. Some examples:
>
> - A Talk command response can be lost. This can result in phantom devices
> being probed or an incorrect device handler ID being retrieved.
>
> - A reply packet containing a null byte can get truncated. Such packets
> are sometimes generated by ADB keyboards.
>
> [...]
Applied to powerpc/next.
[1/9] macintosh/via-macii: Access autopoll_devs when inside lock
https://git.kernel.org/powerpc/c/59ea38f6b3af5636edf541768a1ed721eeaca99e
[2/9] macintosh/via-macii: Poll the device most likely to respond
https://git.kernel.org/powerpc/c/f93bfeb55255bddaa16597e187a99ae6131b964a
[3/9] macintosh/via-macii: Handle /CTLR_IRQ signal correctly
https://git.kernel.org/powerpc/c/b4d76c28eca369b8105fe3a0a9f396e3fbcd0dd5
[4/9] macintosh/via-macii: Remove read_done state
https://git.kernel.org/powerpc/c/b16b67689baa01a5616b651356df7ad3e47a8763
[5/9] macintosh/via-macii: Handle poll replies correctly
https://git.kernel.org/powerpc/c/624cf5b538b507293ec761797bd8ce0702fefe64
[6/9] macintosh/via-macii: Use bool type for reading_reply variable
https://git.kernel.org/powerpc/c/f87a162572c9f7c839a207c7de6c73ffe54a777c
[7/9] macintosh/via-macii: Use unsigned type for autopoll_devs variable
https://git.kernel.org/powerpc/c/5c0c15a1953a7de2878d7e6f5711fd3322b11faa
[8/9] macintosh/via-macii: Use the stack for reset request storage
https://git.kernel.org/powerpc/c/046ace8256489f32740da07de55a913ca09ce5cf
[9/9] macintosh/via-macii: Clarify definition of macii_init()
https://git.kernel.org/powerpc/c/3327e58a04501e06aa531cdb4044aab214a6254a
cheers
^ permalink raw reply
* Re: [PATCH v2 1/2] powerpc/ptdump: Refactor update of st->last_pa
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: Michael Ellerman, Christophe Leroy, Benjamin Herrenschmidt,
Paul Mackerras
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <610d6b1a60ad0bedef865a90153c1110cfaa507e.1593429426.git.christophe.leroy@csgroup.eu>
On Mon, 29 Jun 2020 11:17:18 +0000 (UTC), Christophe Leroy wrote:
> st->last_pa is always updated in note_page() so it can
> be done outside the if/elseif/else block.
Applied to powerpc/next.
[1/2] powerpc/ptdump: Refactor update of st->last_pa
https://git.kernel.org/powerpc/c/846feeace51bce13f5c645d5bf162455b89841fd
[2/2] powerpc/ptdump: Refactor update of pg_state
https://git.kernel.org/powerpc/c/e54e30bca40233139290aecfce932dea9b996516
cheers
^ permalink raw reply
* Re: [PATCH 0/8] Mac ADB IOP driver fixes
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: Finn Thain, Benjamin Herrenschmidt
Cc: linuxppc-dev, linux-m68k, Geert Uytterhoeven, linux-kernel,
Joshua Thompson
In-Reply-To: <cover.1590880623.git.fthain@telegraphics.com.au>
On Sun, 31 May 2020 09:17:03 +1000, Finn Thain wrote:
> The adb-iop driver was never finished. Some deficiencies have become
> apparent over the years. For example,
>
> - Mouse and/or keyboard may stop working if used together
>
> - SRQ autopoll list cannot be changed
>
> [...]
Applied to powerpc/next.
[1/8] macintosh/adb-iop: Remove dead and redundant code
https://git.kernel.org/powerpc/c/8384c82ab0860cd7db2ce4ec403e574f4ee54b6e
[2/8] macintosh/adb-iop: Correct comment text
https://git.kernel.org/powerpc/c/ff785e179faf4bb06a2f73b8dcde6dabb66a83d2
[3/8] macintosh/adb-iop: Adopt bus reset algorithm from via-macii driver
https://git.kernel.org/powerpc/c/303511edb859b1fbf48b3c1d1d53b33a6ebd2a2b
[4/8] macintosh/adb-iop: Access current_req and adb_iop_state when inside lock
https://git.kernel.org/powerpc/c/aac840eca8fec02d594560647130d4e4447e10d9
[5/8] macintosh/adb-iop: Resolve static checker warnings
https://git.kernel.org/powerpc/c/56b732edda96b1942fff974fd298ea2a2c543b94
[6/8] macintosh/adb-iop: Implement idle -> sending state transition
https://git.kernel.org/powerpc/c/32226e81704398317e1cc5a82d24c0ef3cc25e5e
[7/8] macintosh/adb-iop: Implement sending -> idle state transition
https://git.kernel.org/powerpc/c/e2954e5f727fad126258e83259b513988973c166
[8/8] macintosh/adb-iop: Implement SRQ autopolling
https://git.kernel.org/powerpc/c/c66da95a39ec2bb95544c3def974d96e8c178f57
cheers
^ permalink raw reply
* Re: [PATCH v2 0/6] powerpc/32s: Allocate modules outside of vmalloc space for STRICT_KERNEL_RWX
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: Michael Ellerman, Christophe Leroy, Benjamin Herrenschmidt,
Paul Mackerras
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1593428200.git.christophe.leroy@csgroup.eu>
On Mon, 29 Jun 2020 11:15:19 +0000 (UTC), Christophe Leroy wrote:
> On book3s32 (hash), exec protection is set per 256Mb segments with NX bit.
> Instead of clearing NX bit on vmalloc space when CONFIG_MODULES is selected,
> allocate modules in a dedicated segment (0xb0000000-0xbfffffff by default).
> This allows to keep exec protection on vmalloc space while allowing exec
> on modules.
>
> v2:
> - Removed the two patches that fix ptdump. Will submitted independently
> - Only changing the user/kernel boundary for PPC32 now.
> - Reordered the patches inside the series.
>
> [...]
Applied to powerpc/next.
[1/6] powerpc/lib: Prepare code-patching for modules allocated outside vmalloc space
https://git.kernel.org/powerpc/c/ccc8fcf72a6953fbfd6998999d622295f522b952
[2/6] powerpc: Use MODULES_VADDR if defined
https://git.kernel.org/powerpc/c/7fbc22ce29931630da200cfc90fe5a454f54a794
[3/6] powerpc/32s: Only leave NX unset on segments used for modules
https://git.kernel.org/powerpc/c/c496433197154144c310a17939736bc5c155914d
[4/6] powerpc/32: Set user/kernel boundary at TASK_SIZE instead of PAGE_OFFSET
https://git.kernel.org/powerpc/c/b6be1bb7f7216b9e9f33f57abe6e3290c0e66bd4
[5/6] powerpc/32s: Kernel space starts at TASK_SIZE
https://git.kernel.org/powerpc/c/f1a1f7a15eb0e13b84791ff2738b84e414501718
[6/6] powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX
https://git.kernel.org/powerpc/c/6ca055322da8fe25ff9ac50db6f3b7b59b6f961c
cheers
^ permalink raw reply
* Re: [v4] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: Athira Rajeev, mpe; +Cc: jniethe5, mikey, maddy, linuxppc-dev
In-Reply-To: <1595489557-2047-1-git-send-email-atrajeev@linux.vnet.ibm.com>
On Thu, 23 Jul 2020 03:32:37 -0400, Athira Rajeev wrote:
> Initialize Monitor Mode Control Register 3 (MMCR3)
> SPR which is new in power10. For PowerISA v3.1, BHRB disable
> is controlled via Monitor Mode Control Register A (MMCRA) bit,
> namely "BHRB Recording Disable (BHRBRD)". This patch also initializes
> MMCRA BHRBRD to disable BHRB feature at boot for power10.
Applied to powerpc/next.
[1/1] powerpc/perf: Initialize power10 PMU registers in cpu setup routine
https://git.kernel.org/powerpc/c/65156f2b1d9d5bf3fd0eac54b0a7fd515c92773c
cheers
^ permalink raw reply
* Re: [PATCH v2] powerpc/book3s64/pkey: Disable pkey on POWER6 and before
From: Michael Ellerman @ 2020-07-27 7:26 UTC (permalink / raw)
To: linuxppc-dev, Aneesh Kumar K.V, mpe
In-Reply-To: <20200726132517.399076-1-aneesh.kumar@linux.ibm.com>
On Sun, 26 Jul 2020 18:55:17 +0530, Aneesh Kumar K.V wrote:
> POWER6 only support AMR update via privileged mode(MSR[PR] = 0, SPRN_AMR=29)
> The PR=1 alias for that SPR (SPRN_AMR=13) was only supported
> from POWER7. Since we don't allow userspace modifying of AMR value
> we should disable pkey support on P6 and before.
>
> The hypervisor will still report pkey support via ibm,processor-storage-keys.
> Hence check for P7 CPU_FTR bit to decide on pkey support.
Applied to powerpc/next.
[1/1] powerpc/book3s64/pkey: Disable pkey on POWER6 and before
https://git.kernel.org/powerpc/c/269e829f48a0d0d27667abe25ca5c9e5b6ab08e2
cheers
^ permalink raw reply
* [powerpc:merge] BUILD SUCCESS 163c4334d6564fc8cb638d9f816ef5e1db1b8f1d
From: kernel test robot @ 2020-07-27 7:15 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git merge
branch HEAD: 163c4334d6564fc8cb638d9f816ef5e1db1b8f1d Automatic merge of 'master', 'next' and 'fixes' (2020-07-26 23:57)
elapsed time: 1017m
configs tested: 58
configs skipped: 1
The following configs have been built successfully.
More configs may be tested in the coming days.
arm64 allyesconfig
arm64 defconfig
arm defconfig
arm allyesconfig
arm allmodconfig
i386 allyesconfig
i386 defconfig
ia64 allmodconfig
ia64 defconfig
ia64 allyesconfig
m68k allmodconfig
m68k sun3_defconfig
m68k defconfig
m68k allyesconfig
nds32 defconfig
nds32 allnoconfig
csky defconfig
alpha defconfig
alpha allyesconfig
nios2 allyesconfig
xtensa allyesconfig
h8300 allyesconfig
xtensa defconfig
arc defconfig
sh allmodconfig
arc allyesconfig
parisc defconfig
s390 allyesconfig
parisc allyesconfig
s390 defconfig
nios2 defconfig
openrisc defconfig
c6x allyesconfig
sparc allyesconfig
sparc defconfig
mips allyesconfig
mips allmodconfig
powerpc defconfig
powerpc allyesconfig
powerpc allmodconfig
powerpc allnoconfig
i386 randconfig-a016-20200727
i386 randconfig-a013-20200727
i386 randconfig-a012-20200727
i386 randconfig-a015-20200727
i386 randconfig-a011-20200727
i386 randconfig-a014-20200727
riscv allyesconfig
riscv allnoconfig
riscv defconfig
riscv allmodconfig
sparc64 defconfig
x86_64 rhel-7.6-kselftests
x86_64 rhel-8.3
x86_64 kexec
x86_64 rhel
x86_64 allyesconfig
x86_64 defconfig
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply
* Re: [PATCH V4 0/4] powerpc/perf: Add support for perf extended regs in powerpc
From: Ravi Bangoria @ 2020-07-27 7:03 UTC (permalink / raw)
To: Athira Rajeev, mpe
Cc: Ravi Bangoria, mikey, maddy, kjain, acme, jolsa, linuxppc-dev
In-Reply-To: <1595774713-1482-1-git-send-email-atrajeev@linux.vnet.ibm.com>
On 7/26/20 8:15 PM, Athira Rajeev wrote:
> Patch set to add support for perf extended register capability in
> powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to
> indicate the PMU which support extended registers. The generic code
> define the mask of extended registers as 0 for non supported architectures.
>
> Patches 1 and 2 are the kernel side changes needed to include
> base support for extended regs in powerpc and in power10.
> Patches 3 and 4 are the perf tools side changes needed to support the
> extended registers.
>
> patch 1/4 defines the PERF_PMU_CAP_EXTENDED_REGS mask to output the
> values of mmcr0,mmcr1,mmcr2 for POWER9. Defines `PERF_REG_EXTENDED_MASK`
> at runtime which contains mask value of the supported registers under
> extended regs.
>
> patch 2/4 adds the extended regs support for power10 and exposes
> MMCR3, SIER2, SIER3 registers as part of extended regs.
>
> Patch 3/4 and 4/4 adds extended regs to sample_reg_mask in the tool
> side to use with `-I?` option for power9 and power10 respectively.
>
> Ravi bangoria found an issue with `perf record -I` while testing the
> changes. The same issue is currently being worked on here:
> https://lkml.org/lkml/2020/7/19/413 and will be resolved once fix
> from Jin Yao is merged.
>
> This patch series is based on powerpc/next
Apart from the issue with patch #1, the series LGTM..
Reviewed-and-Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
^ permalink raw reply
* [PATCH] powerpc/fadump: Fix build error with CONFIG_PRESERVE_FA_DUMP=y
From: Michael Ellerman @ 2020-07-27 7:03 UTC (permalink / raw)
To: linuxppc-dev
skiroot_defconfig fails:
arch/powerpc/kernel/fadump.c:48:17: error: ‘cpus_in_fadump’ defined but not used
48 | static atomic_t cpus_in_fadump;
Fix it by moving the definition into the #ifdef where it's used.
Fixes: ba608c4fa12c ("powerpc/fadump: fix race between pstore write and fadump crash trigger")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/kernel/fadump.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 1858896d6809..10ebb4bf71ad 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -45,10 +45,12 @@ static struct fw_dump fw_dump;
static void __init fadump_reserve_crash_area(u64 base);
struct kobject *fadump_kobj;
-static atomic_t cpus_in_fadump;
#ifndef CONFIG_PRESERVE_FA_DUMP
+
+static atomic_t cpus_in_fadump;
static DEFINE_MUTEX(fadump_mutex);
+
struct fadump_mrange_info crash_mrange_info = { "crash", NULL, 0, 0, 0, false };
#define RESERVED_RNGS_SZ 16384 /* 16K - 128 entries */
--
2.25.1
^ permalink raw reply related
* Re: [PATCH V4 1/4] powerpc/perf: Add support for outputting extended regs in perf intr_regs
From: Ravi Bangoria @ 2020-07-27 7:01 UTC (permalink / raw)
To: Athira Rajeev
Cc: Ravi Bangoria, mikey, maddy, acme, jolsa, kjain, linuxppc-dev
In-Reply-To: <1595774713-1482-2-git-send-email-atrajeev@linux.vnet.ibm.com>
Hi Athira,
> +/* Function to return the extended register values */
> +static u64 get_ext_regs_value(int idx)
> +{
> + switch (idx) {
> + case PERF_REG_POWERPC_MMCR0:
> + return mfspr(SPRN_MMCR0);
> + case PERF_REG_POWERPC_MMCR1:
> + return mfspr(SPRN_MMCR1);
> + case PERF_REG_POWERPC_MMCR2:
> + return mfspr(SPRN_MMCR2);
> + default: return 0;
> + }
> +}
> +
> u64 perf_reg_value(struct pt_regs *regs, int idx)
> {
> - if (WARN_ON_ONCE(idx >= PERF_REG_POWERPC_MAX))
> - return 0;
> + u64 perf_reg_extended_max = 0;
This should be initialized to PERF_REG_POWERPC_MAX. Default to 0 will always
trigger below WARN_ON_ONCE(idx >= perf_reg_extended_max) on non p9/p10 systems.
> +
> + if (cpu_has_feature(CPU_FTR_ARCH_300))
> + perf_reg_extended_max = PERF_REG_MAX_ISA_300;
>
> if (idx == PERF_REG_POWERPC_SIER &&
> (IS_ENABLED(CONFIG_FSL_EMB_PERF_EVENT) ||
> @@ -85,6 +103,16 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
> IS_ENABLED(CONFIG_PPC32)))
> return 0;
>
> + if (idx >= PERF_REG_POWERPC_MAX && idx < perf_reg_extended_max)
> + return get_ext_regs_value(idx);
> +
> + /*
> + * If the idx is referring to value beyond the
> + * supported registers, return 0 with a warning
> + */
> + if (WARN_ON_ONCE(idx >= perf_reg_extended_max))
> + return 0;
> +
> return regs_get_register(regs, pt_regs_offset[idx]);
> }
Ravi
^ permalink raw reply
* Re: [PATCH 0/9] powerpc: delete duplicated words
From: Joe Perches @ 2020-07-27 6:51 UTC (permalink / raw)
To: Randy Dunlap, Christophe Leroy; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
In-Reply-To: <4e505c35-8428-89bb-7f9b-bc819382c3cd@infradead.org>
[-- Attachment #1: Type: text/plain, Size: 4209 bytes --]
On Sun, 2020-07-26 at 12:08 -0700, Randy Dunlap wrote:
> v0.1 of this script also found lots of repeated numbers and strings of
> special characters (ASCII art etc.), so now it ignores duplicated numbers
> or special characters -- since it is really looking for duplicate words.
>
> Anyway, I might as well attach it. It's no big deal.
> And if someone else wants to tackle using it, go for it.
This might be a reasonable thing to add to checkpatch.
And here's another possible similar perl word deduplicator attached:
Assuming you have git, this could be used like:
$ git ls-files -- <dir> | xargs perl deduplicate_words.pl
And it would overwrite all files with duplicated words.
No guarantees any changes it makes are right of course.
It still needs a human to verify any change.
For instance:
$ git ls-files kernel/trace/*.[ch] | xargs perl deduplicate_words.pl
$ git diff kernel/trace
kernel/trace/ftrace.c | 2 +-
kernel/trace/trace.c | 2 +-
kernel/trace/trace_dynevent.c | 2 +-
kernel/trace/trace_events_synth.c | 2 +-
kernel/trace/tracing_map.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index a3093a84bae3..b7f085a4f71a 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2405,7 +2405,7 @@ struct ftrace_ops direct_ops = {
*
* If the record has the FTRACE_FL_REGS set, that means that it
* wants to convert to a callback that saves all regs. If FTRACE_FL_REGS
- * is not not set, then it wants to convert to the normal callback.
+ * is not set, then it wants to convert to the normal callback.
*
* Returns the address of the trampoline to set to
*/
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 5aa5c01e2fed..4d3dcfb06d6d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -9253,7 +9253,7 @@ void ftrace_dump(enum ftrace_dump_mode oops_dump_mode)
/*
* We need to stop all tracing on all CPUS to read the
- * the next buffer. This is a bit expensive, but is
+ * next buffer. This is a bit expensive, but is
* not done often. We fill all what we can read,
* and then release the locks again.
*/
diff --git a/kernel/trace/trace_dynevent.c b/kernel/trace/trace_dynevent.c
index 2c435fdef565..8c1e7e168505 100644
--- a/kernel/trace/trace_dynevent.c
+++ b/kernel/trace/trace_dynevent.c
@@ -402,7 +402,7 @@ void dynevent_arg_init(struct dynevent_arg *arg,
* whitespace, all followed by a separator, if applicable. After the
* first arg string is successfully appended to the command string,
* the optional @operator is appended, followed by the second arg and
- * and optional @separator. If no separator was specified when
+ * optional @separator. If no separator was specified when
* initializing the arg, a space will be appended.
*/
void dynevent_arg_pair_init(struct dynevent_arg_pair *arg_pair,
diff --git a/kernel/trace/trace_events_synth.c b/kernel/trace/trace_events_synth.c
index e2a623f2136c..3801d3088744 100644
--- a/kernel/trace/trace_events_synth.c
+++ b/kernel/trace/trace_events_synth.c
@@ -1211,7 +1211,7 @@ __synth_event_trace_start(struct trace_event_file *file,
* ENABLED bit is set (which attaches the probe thus allowing
* this code to be called, etc). Because this is called
* directly by the user, we don't have that but we still need
- * to honor not logging when disabled. For the the iterated
+ * to honor not logging when disabled. For the iterated
* trace case, we save the enabed state upon start and just
* ignore the following data calls.
*/
diff --git a/kernel/trace/tracing_map.c b/kernel/trace/tracing_map.c
index 74738c9856f1..4b50fc0cb12c 100644
--- a/kernel/trace/tracing_map.c
+++ b/kernel/trace/tracing_map.c
@@ -260,7 +260,7 @@ int tracing_map_add_var(struct tracing_map *map)
* to use cmp_fn.
*
* A key can be a subset of a compound key; for that purpose, the
- * offset param is used to describe where within the the compound key
+ * offset param is used to describe where within the compound key
* the key referenced by this key field resides.
*
* Return: The index identifying the field in the map and associated
[-- Attachment #2: deduplicate_words.pl --]
[-- Type: application/x-perl, Size: 1179 bytes --]
^ permalink raw reply related
* Re: [PATCH v4 00/10] Coregroup support on Powerpc
From: Srikar Dronamraju @ 2020-07-27 6:33 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Oliver OHalloran, Michael Neuling,
Michael Ellerman, Peter Zijlstra, Jordan Niethe, Anton Blanchard,
LKML, Ingo Molnar, Nick Piggin, linuxppc-dev, Valentin Schneider
In-Reply-To: <20200727051805.16728-1-srikar@linux.vnet.ibm.com>
* Srikar Dronamraju <srikar@linux.vnet.ibm.com> [2020-07-27 10:47:55]:
> Changelog v3 ->v4:
> v3: https://lore.kernel.org/lkml/20200723085116.4731-1-srikar@linux.vnet.ibm.com/t/#u
>
> powerpc/smp: Create coregroup domain
> if coregroup_support doesn't exist, update MC mask to the next
> smaller domain mask.
>
Sorry for the double post of v4.
Please follow the other thread.
http://lore.kernel.org/lkml/20200727053230.19753-1-srikar@linux.vnet.ibm.com/t/#u
>
--
Thanks and Regards
Srikar Dronamraju
^ permalink raw reply
* Re: [PATCH] ASoC: fsl-asoc-card: Remove fsl_asoc_card_set_bias_level function
From: Shengjiu Wang @ 2020-07-27 6:33 UTC (permalink / raw)
To: Nicolin Chen
Cc: Linux-ALSA, Timur Tabi, Xiubo Li, Fabio Estevam, Shengjiu Wang,
Takashi Iwai, Liam Girdwood, Mark Brown, linuxppc-dev,
linux-kernel
In-Reply-To: <20200727005558.GA30124@Asurada-Nvidia>
On Mon, Jul 27, 2020 at 8:58 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> On Sun, Jul 26, 2020 at 07:20:17PM +0800, Shengjiu Wang wrote:
> > With this case:
> > aplay -Dhw:x 16khz.wav 24khz.wav
> > There is sound distortion for 24khz.wav. The reason is that setting
> > PLL of WM8962 with set_bias_level function, the bias level is not
> > changed when 24khz.wav is played, then the PLL won't be reset, the
> > clock is not correct, so distortion happens.
> >
> > The resolution of this issue is to remove fsl_asoc_card_set_bias_level.
> > Move PLL configuration to hw_params and hw_free.
>
> Hmm...using set_bias_level() instead of hw_params/hw_free() was
> strongly suggested by Mark when I got imx-wm8962 machine driver
> upstream. So we will need his input here, although I personally
> don't have a problem with it...
>
> > After removing fsl_asoc_card_set_bias_level, also test WM8960 case,
> > it can work.
> >
> > Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> > sound/soc/fsl/fsl-asoc-card.c | 149 +++++++++++++++-------------------
> > 1 file changed, 66 insertions(+), 83 deletions(-)
> >
> > diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
> > index 4848ba61d083..0517dbb3e908 100644
> > --- a/sound/soc/fsl/fsl-asoc-card.c
> > +++ b/sound/soc/fsl/fsl-asoc-card.c
> > @@ -73,6 +73,7 @@ struct cpu_priv {
> > * @codec_priv: CODEC private data
> > * @cpu_priv: CPU private data
> > * @card: ASoC card structure
> > + * @is_stream_in_use: flags for release resource in hw_free
>
> Would love to see something shorter... Could we reuse similar
> one below, borrowing from fsl_ssi driver?
>
> * @streams: Mask of current active streams: BIT(TX) and BIT(RX)
>
> > static int fsl_asoc_card_audmux_init(struct device_node *np,
> > struct fsl_asoc_card_priv *priv)
> > {
> > @@ -611,7 +600,6 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
> > /* Diversify the card configurations */
> > if (of_device_is_compatible(np, "fsl,imx-audio-cs42888")) {
> > codec_dai_name = "cs42888";
> > - priv->card.set_bias_level = NULL;
>
> Can check if set_bias_level is still being used with this change.
Do you mean to keep this line:
priv->card.set_bias_level = NULL; ?
best regards
wang shengjiu
^ permalink raw reply
* [PATCH] powerpc/64s/hash: Fix hash_preload running with interrupts enabled
From: Nicholas Piggin @ 2020-07-27 6:09 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Aneesh Kumar K . V, Athira Rajeev, Nicholas Piggin
Commit 2f92447f9f96 ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Fixes: 2f92447f9f96 ("powerpc/book3s64/hash: Use the pte_t address from the
caller")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 14 +++++++++++---
arch/powerpc/mm/book3s64/hash_utils.c | 25 +++++++++++++++++++++++++
arch/powerpc/perf/core-book3s.c | 6 ++++++
3 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 0fc8bad878b2..446e54c3f71e 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -3072,10 +3072,18 @@ do_hash_page:
ori r0,r0,DSISR_BAD_FAULT_64S@l
and. r0,r5,r0 /* weird error? */
bne- handle_page_fault /* if not, try to insert a HPTE */
+
+ /*
+ * If we are in an "NMI" (e.g., an interrupt when soft-disabled), then
+ * don't call hash_page, just fail the fault. This is required to
+ * prevent re-entrancy problems in the hash code, namely perf
+ * interrupts hitting while something holds H_PAGE_BUSY, and taking a
+ * hash fault. See the comment in hash_preload().
+ */
ld r11, PACA_THREAD_INFO(r13)
- lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
- andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
- bne 77f /* then don't call hash_page now */
+ lwz r0,TI_PREEMPT(r11)
+ andis. r0,r0,NMI_MASK@h
+ bne 77f
/*
* r3 contains the trap number
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 468169e33c86..9b9f92ad0e7a 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1559,6 +1559,7 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
pgd_t *pgdir;
int rc, ssize, update_flags = 0;
unsigned long access = _PAGE_PRESENT | _PAGE_READ | (is_exec ? _PAGE_EXEC : 0);
+ unsigned long flags;
BUG_ON(get_region_id(ea) != USER_REGION_ID);
@@ -1592,6 +1593,28 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
return;
#endif /* CONFIG_PPC_64K_PAGES */
+ /*
+ * __hash_page_* must run with interrupts off, as it sets the
+ * H_PAGE_BUSY bit. It's possible for perf interrupts to hit at any
+ * time and may take a hash fault reading the user stack, see
+ * read_user_stack_slow() in the powerpc/perf code.
+ *
+ * If that takes a hash fault on the same page as we lock here, it
+ * will bail out when seeing H_PAGE_BUSY set, and retry the access
+ * leading to an infinite loop.
+ *
+ * Disabling interrupts here does not prevent perf interrupts, but it
+ * will prevent them taking hash faults (see the NMI test in
+ * do_hash_page), then read_user_stack's copy_from_user_nofault will
+ * fail and perf will fall back to read_user_stack_slow(), which
+ * walks the Linux page tables.
+ *
+ * Interrupts must also be off for the duration of the
+ * mm_is_thread_local test and update, to prevent preempt running the
+ * mm on another CPU (XXX: this may be racy vs kthread_use_mm).
+ */
+ local_irq_save(flags);
+
/* Is that local to this CPU ? */
if (mm_is_thread_local(mm))
update_flags |= HPTE_LOCAL_UPDATE;
@@ -1614,6 +1637,8 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
mm_ctx_user_psize(&mm->context),
mm_ctx_user_psize(&mm->context),
pte_val(*ptep));
+
+ local_irq_restore(flags);
}
/*
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index cd6a742ac6ef..01d70280d287 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2179,6 +2179,12 @@ static void __perf_event_interrupt(struct pt_regs *regs)
perf_read_regs(regs);
+ /*
+ * If perf interrupts hit in a local_irq_disable (soft-masked) region,
+ * we consider them as NMIs. This is required to prevent hash faults on
+ * user addresses when reading callchains. See the NMI test in
+ * do_hash_page.
+ */
nmi = perf_intr_is_nmi(regs);
if (nmi)
nmi_enter();
--
2.23.0
^ permalink raw reply related
* [PATCH v4 10/10] powerpc/smp: Implement cpu_to_coregroup_id
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Lookup the coregroup id from the associativity array.
If unable to detect the coregroup id, fallback on the core id.
This way, ensure sched_domain degenerates and an extra sched domain is
not created.
Ideally this function should have been implemented in
arch/powerpc/kernel/smp.c. However if its implemented in mm/numa.c, we
don't need to find the primary domain again.
If the device-tree mentions more than one coregroup, then kernel
implements only the last or the smallest coregroup, which currently
corresponds to the penultimate domain in the device-tree.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by : Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
Move coregroup_enabled before getting associativity (Gautham)
arch/powerpc/mm/numa.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0d57779e7942..8b3b3ec7fcc4 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1218,6 +1218,26 @@ int find_and_online_cpu_nid(int cpu)
int cpu_to_coregroup_id(int cpu)
{
+ __be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
+ int index;
+
+ if (cpu < 0 || cpu > nr_cpu_ids)
+ return -1;
+
+ if (!coregroup_enabled)
+ goto out;
+
+ if (!firmware_has_feature(FW_FEATURE_VPHN))
+ goto out;
+
+ if (vphn_get_associativity(cpu, associativity))
+ goto out;
+
+ index = of_read_number(associativity, 1);
+ if (index > min_common_depth + 1)
+ return of_read_number(&associativity[index - 1], 1);
+
+out:
return cpu_to_core_id(cpu);
}
--
2.17.1
^ permalink raw reply related
* [PATCH v4 09/10] Powerpc/smp: Create coregroup domain
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Add percpu coregroup maps and masks to create coregroup domain.
If a coregroup doesn't exist, the coregroup domain will be degenerated
in favour of SMT/CACHE domain.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v3 ->v4:
if coregroup_support doesn't exist, update MC mask to the next
smaller domain mask.
Changelog v2 -> v3:
Add optimization for mask updation under coregroup_support
Changelog v1 -> v2:
Moved coregroup topology fixup to fixup_topology (Gautham)
arch/powerpc/include/asm/topology.h | 10 +++++++
arch/powerpc/kernel/smp.c | 44 +++++++++++++++++++++++++++++
arch/powerpc/mm/numa.c | 5 ++++
3 files changed, 59 insertions(+)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index f0b6300e7dd3..6609174918ab 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -88,12 +88,22 @@ static inline int cpu_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc)
#if defined(CONFIG_NUMA) && defined(CONFIG_PPC_SPLPAR)
extern int find_and_online_cpu_nid(int cpu);
+extern int cpu_to_coregroup_id(int cpu);
#else
static inline int find_and_online_cpu_nid(int cpu)
{
return 0;
}
+static inline int cpu_to_coregroup_id(int cpu)
+{
+#ifdef CONFIG_SMP
+ return cpu_to_core_id(cpu);
+#else
+ return 0;
+#endif
+}
+
#endif /* CONFIG_NUMA && CONFIG_PPC_SPLPAR */
#include <asm-generic/topology.h>
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index dab96a1203ec..95f0bf72e283 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -80,6 +80,7 @@ DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
DEFINE_PER_CPU(cpumask_var_t, cpu_smallcore_map);
DEFINE_PER_CPU(cpumask_var_t, cpu_l2_cache_map);
DEFINE_PER_CPU(cpumask_var_t, cpu_core_map);
+DEFINE_PER_CPU(cpumask_var_t, cpu_coregroup_map);
EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
EXPORT_PER_CPU_SYMBOL(cpu_l2_cache_map);
@@ -91,6 +92,7 @@ enum {
smt_idx,
#endif
bigcore_idx,
+ mc_idx,
die_idx,
};
@@ -869,6 +871,21 @@ static const struct cpumask *smallcore_smt_mask(int cpu)
}
#endif
+static struct cpumask *cpu_coregroup_mask(int cpu)
+{
+ return per_cpu(cpu_coregroup_map, cpu);
+}
+
+static bool has_coregroup_support(void)
+{
+ return coregroup_enabled;
+}
+
+static const struct cpumask *cpu_mc_mask(int cpu)
+{
+ return cpu_coregroup_mask(cpu);
+}
+
static const struct cpumask *cpu_bigcore_mask(int cpu)
{
return per_cpu(cpu_sibling_map, cpu);
@@ -879,6 +896,7 @@ static struct sched_domain_topology_level powerpc_topology[] = {
{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
#endif
{ cpu_bigcore_mask, SD_INIT_NAME(BIGCORE) },
+ { cpu_mc_mask, SD_INIT_NAME(MC) },
{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
{ NULL, },
};
@@ -925,6 +943,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
GFP_KERNEL, cpu_to_node(cpu));
zalloc_cpumask_var_node(&per_cpu(cpu_core_map, cpu),
GFP_KERNEL, cpu_to_node(cpu));
+ if (has_coregroup_support())
+ zalloc_cpumask_var_node(&per_cpu(cpu_coregroup_map, cpu),
+ GFP_KERNEL, cpu_to_node(cpu));
+
#ifdef CONFIG_NEED_MULTIPLE_NODES
/*
* numa_node_id() works after this.
@@ -942,6 +964,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
cpumask_set_cpu(boot_cpuid, cpu_l2_cache_mask(boot_cpuid));
cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
+ if (has_coregroup_support())
+ cpumask_set_cpu(boot_cpuid, cpu_coregroup_mask(boot_cpuid));
+
init_big_cores();
if (has_big_cores) {
cpumask_set_cpu(boot_cpuid,
@@ -1233,6 +1258,8 @@ static void remove_cpu_from_masks(int cpu)
set_cpus_unrelated(cpu, i, cpu_sibling_mask);
if (has_big_cores)
set_cpus_unrelated(cpu, i, cpu_smallcore_mask);
+ if (has_coregroup_support())
+ set_cpus_unrelated(cpu, i, cpu_coregroup_mask);
}
}
#endif
@@ -1293,6 +1320,20 @@ static void add_cpu_to_masks(int cpu)
add_cpu_to_smallcore_masks(cpu);
update_mask_by_l2(cpu, cpu_l2_cache_mask);
+ if (has_coregroup_support()) {
+ int coregroup_id = cpu_to_coregroup_id(cpu);
+
+ cpumask_set_cpu(cpu, cpu_coregroup_mask(cpu));
+ for_each_cpu_and(i, cpu_online_mask, cpu_cpu_mask(cpu)) {
+ int fcpu = cpu_first_thread_sibling(i);
+
+ if (fcpu == first_thread)
+ set_cpus_related(cpu, i, cpu_coregroup_mask);
+ else if (coregroup_id == cpu_to_coregroup_id(i))
+ set_cpus_related(cpu, i, cpu_coregroup_mask);
+ }
+ }
+
if (pkg_id == -1) {
struct cpumask *(*mask)(int) = cpu_sibling_mask;
@@ -1398,6 +1439,9 @@ static void fixup_topology(void)
powerpc_topology[bigcore_idx].name = "CACHE";
#endif
}
+
+ if (!has_coregroup_support())
+ powerpc_topology[mc_idx].mask = powerpc_topology[bigcore_idx].mask;
}
void __init smp_cpus_done(unsigned int max_cpus)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 51cb672f113b..0d57779e7942 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1216,6 +1216,11 @@ int find_and_online_cpu_nid(int cpu)
return new_nid;
}
+int cpu_to_coregroup_id(int cpu)
+{
+ return cpu_to_core_id(cpu);
+}
+
static int topology_update_init(void)
{
topology_inited = 1;
--
2.17.1
^ permalink raw reply related
* [PATCH v4 08/10] powerpc/smp: Allocate cpumask only after searching thread group
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
If allocated earlier and the search fails, then cpumask need to be
freed. However cpu_l1_cache_map can be allocated after we search thread
group.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
arch/powerpc/kernel/smp.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 698000c7f76f..dab96a1203ec 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -797,10 +797,6 @@ static int init_cpu_l1_cache_map(int cpu)
if (err)
goto out;
- zalloc_cpumask_var_node(&per_cpu(cpu_l1_cache_map, cpu),
- GFP_KERNEL,
- cpu_to_node(cpu));
-
cpu_group_start = get_cpu_thread_group_start(cpu, &tg);
if (unlikely(cpu_group_start == -1)) {
@@ -809,6 +805,9 @@ static int init_cpu_l1_cache_map(int cpu)
goto out;
}
+ zalloc_cpumask_var_node(&per_cpu(cpu_l1_cache_map, cpu),
+ GFP_KERNEL, cpu_to_node(cpu));
+
for (i = first_thread; i < first_thread + threads_per_core; i++) {
int i_group_start = get_cpu_thread_group_start(i, &tg);
--
2.17.1
^ permalink raw reply related
* [PATCH v4 07/10] Powerpc/numa: Detect support for coregroup
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Add support for grouping cores based on the device-tree classification.
- The last domain in the associativity domains always refers to the
core.
- If primary reference domain happens to be the penultimate domain in
the associativity domains device-tree property, then there are no
coregroups. However if its not a penultimate domain, then there are
coregroups. There can be more than one coregroup. For now we would be
interested in the last or the smallest coregroups.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
Explained Coregroup in commit msg (Michael Ellerman)
arch/powerpc/include/asm/smp.h | 1 +
arch/powerpc/kernel/smp.c | 1 +
arch/powerpc/mm/numa.c | 34 +++++++++++++++++++++-------------
3 files changed, 23 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 49a25e2400f2..5bdc17a7049f 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -28,6 +28,7 @@
extern int boot_cpuid;
extern int spinning_secondaries;
extern u32 *cpu_to_phys_id;
+extern bool coregroup_enabled;
extern void cpu_die(void);
extern int cpu_to_chip_id(int cpu);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 3c5ccf6d2b1c..698000c7f76f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -74,6 +74,7 @@ static DEFINE_PER_CPU(int, cpu_state) = { 0 };
struct task_struct *secondary_current;
bool has_big_cores;
+bool coregroup_enabled;
DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
DEFINE_PER_CPU(cpumask_var_t, cpu_smallcore_map);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 2298899a0f0a..51cb672f113b 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -886,7 +886,9 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
static void __init find_possible_nodes(void)
{
struct device_node *rtas;
- u32 numnodes, i;
+ const __be32 *domains;
+ int prop_length, max_nodes;
+ u32 i;
if (!numa_enabled)
return;
@@ -895,25 +897,31 @@ static void __init find_possible_nodes(void)
if (!rtas)
return;
- if (of_property_read_u32_index(rtas, "ibm,current-associativity-domains",
- min_common_depth, &numnodes)) {
- /*
- * ibm,current-associativity-domains is a fairly recent
- * property. If it doesn't exist, then fallback on
- * ibm,max-associativity-domains. Current denotes what the
- * platform can support compared to max which denotes what the
- * Hypervisor can support.
- */
- if (of_property_read_u32_index(rtas, "ibm,max-associativity-domains",
- min_common_depth, &numnodes))
+ /*
+ * ibm,current-associativity-domains is a fairly recent property. If
+ * it doesn't exist, then fallback on ibm,max-associativity-domains.
+ * Current denotes what the platform can support compared to max
+ * which denotes what the Hypervisor can support.
+ */
+ domains = of_get_property(rtas, "ibm,current-associativity-domains",
+ &prop_length);
+ if (!domains) {
+ domains = of_get_property(rtas, "ibm,max-associativity-domains",
+ &prop_length);
+ if (!domains)
goto out;
}
- for (i = 0; i < numnodes; i++) {
+ max_nodes = of_read_number(&domains[min_common_depth], 1);
+ for (i = 0; i < max_nodes; i++) {
if (!node_possible(i))
node_set(i, node_possible_map);
}
+ prop_length /= sizeof(int);
+ if (prop_length > min_common_depth + 2)
+ coregroup_enabled = 1;
+
out:
of_node_put(rtas);
}
--
2.17.1
^ permalink raw reply related
* [PATCH v4 06/10] powerpc/smp: Generalize 2nd sched domain
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Currently "CACHE" domain happens to be the 2nd sched domain as per
powerpc_topology. This domain will collapse if cpumask of l2-cache is
same as SMT domain. However we could generalize this domain such that it
could mean either be a "CACHE" domain or a "BIGCORE" domain.
While setting up the "CACHE" domain, check if shared_cache is already
set.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
Moved shared_cache topology fixup to fixup_topology (Gautham)
arch/powerpc/kernel/smp.c | 48 +++++++++++++++++++++++++++------------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index d997c7411664..3c5ccf6d2b1c 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -85,6 +85,14 @@ EXPORT_PER_CPU_SYMBOL(cpu_l2_cache_map);
EXPORT_PER_CPU_SYMBOL(cpu_core_map);
EXPORT_SYMBOL_GPL(has_big_cores);
+enum {
+#ifdef CONFIG_SCHED_SMT
+ smt_idx,
+#endif
+ bigcore_idx,
+ die_idx,
+};
+
#define MAX_THREAD_LIST_SIZE 8
#define THREAD_GROUP_SHARE_L1 1
struct thread_groups {
@@ -851,13 +859,7 @@ static int powerpc_shared_cache_flags(void)
*/
static const struct cpumask *shared_cache_mask(int cpu)
{
- if (shared_caches)
- return cpu_l2_cache_mask(cpu);
-
- if (has_big_cores)
- return cpu_smallcore_mask(cpu);
-
- return per_cpu(cpu_sibling_map, cpu);
+ return per_cpu(cpu_l2_cache_map, cpu);
}
#ifdef CONFIG_SCHED_SMT
@@ -867,11 +869,16 @@ static const struct cpumask *smallcore_smt_mask(int cpu)
}
#endif
+static const struct cpumask *cpu_bigcore_mask(int cpu)
+{
+ return per_cpu(cpu_sibling_map, cpu);
+}
+
static struct sched_domain_topology_level powerpc_topology[] = {
#ifdef CONFIG_SCHED_SMT
{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
#endif
- { shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) },
+ { cpu_bigcore_mask, SD_INIT_NAME(BIGCORE) },
{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
{ NULL, },
};
@@ -1311,7 +1318,6 @@ static void add_cpu_to_masks(int cpu)
void start_secondary(void *unused)
{
unsigned int cpu = smp_processor_id();
- struct cpumask *(*sibling_mask)(int) = cpu_sibling_mask;
mmgrab(&init_mm);
current->active_mm = &init_mm;
@@ -1337,14 +1343,20 @@ void start_secondary(void *unused)
/* Update topology CPU masks */
add_cpu_to_masks(cpu);
- if (has_big_cores)
- sibling_mask = cpu_smallcore_mask;
/*
* Check for any shared caches. Note that this must be done on a
* per-core basis because one core in the pair might be disabled.
*/
- if (!cpumask_equal(cpu_l2_cache_mask(cpu), sibling_mask(cpu)))
- shared_caches = true;
+ if (!shared_caches) {
+ struct cpumask *(*sibling_mask)(int) = cpu_sibling_mask;
+ struct cpumask *mask = cpu_l2_cache_mask(cpu);
+
+ if (has_big_cores)
+ sibling_mask = cpu_smallcore_mask;
+
+ if (cpumask_weight(mask) > cpumask_weight(sibling_mask(cpu)))
+ shared_caches = true;
+ }
set_numa_node(numa_cpu_lookup_table[cpu]);
set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
@@ -1375,9 +1387,17 @@ static void fixup_topology(void)
#ifdef CONFIG_SCHED_SMT
if (has_big_cores) {
pr_info("Big cores detected but using small core scheduling\n");
- powerpc_topology[0].mask = smallcore_smt_mask;
+ powerpc_topology[smt_idx].mask = smallcore_smt_mask;
}
#endif
+ if (shared_caches) {
+ pr_info("Using shared cache scheduler topology\n");
+ powerpc_topology[bigcore_idx].mask = shared_cache_mask;
+ powerpc_topology[bigcore_idx].sd_flags = powerpc_shared_cache_flags;
+#ifdef CONFIG_SCHED_DEBUG
+ powerpc_topology[bigcore_idx].name = "CACHE";
+#endif
+ }
}
void __init smp_cpus_done(unsigned int max_cpus)
--
2.17.1
^ permalink raw reply related
* [PATCH v4 05/10] powerpc/smp: Dont assume l2-cache to be superset of sibling
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Current code assumes that cpumask of cpus sharing a l2-cache mask will
always be a superset of cpu_sibling_mask.
Lets stop that assumption. cpu_l2_cache_mask is a superset of
cpu_sibling_mask if and only if shared_caches is set.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
Set cpumask after verifying l2-cache. (Gautham)
arch/powerpc/kernel/smp.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index da27f6909be1..d997c7411664 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1194,6 +1194,7 @@ static bool update_mask_by_l2(int cpu, struct cpumask *(*mask_fn)(int))
if (!l2_cache)
return false;
+ cpumask_set_cpu(cpu, mask_fn(cpu));
for_each_cpu(i, cpu_online_mask) {
/*
* when updating the marks the current CPU has not been marked
@@ -1276,29 +1277,30 @@ static void add_cpu_to_masks(int cpu)
* add it to it's own thread sibling mask.
*/
cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));
+ cpumask_set_cpu(cpu, cpu_core_mask(cpu));
for (i = first_thread; i < first_thread + threads_per_core; i++)
if (cpu_online(i))
set_cpus_related(i, cpu, cpu_sibling_mask);
add_cpu_to_smallcore_masks(cpu);
- /*
- * Copy the thread sibling mask into the cache sibling mask
- * and mark any CPUs that share an L2 with this CPU.
- */
- for_each_cpu(i, cpu_sibling_mask(cpu))
- set_cpus_related(cpu, i, cpu_l2_cache_mask);
update_mask_by_l2(cpu, cpu_l2_cache_mask);
- /*
- * Copy the cache sibling mask into core sibling mask and mark
- * any CPUs on the same chip as this CPU.
- */
- for_each_cpu(i, cpu_l2_cache_mask(cpu))
- set_cpus_related(cpu, i, cpu_core_mask);
+ if (pkg_id == -1) {
+ struct cpumask *(*mask)(int) = cpu_sibling_mask;
+
+ /*
+ * Copy the sibling mask into core sibling mask and
+ * mark any CPUs on the same chip as this CPU.
+ */
+ if (shared_caches)
+ mask = cpu_l2_cache_mask;
+
+ for_each_cpu(i, mask(cpu))
+ set_cpus_related(cpu, i, cpu_core_mask);
- if (pkg_id == -1)
return;
+ }
for_each_cpu(i, cpu_online_mask)
if (get_physical_package_id(i) == pkg_id)
--
2.17.1
^ permalink raw reply related
* [PATCH v4 04/10] powerpc/smp: Move topology fixups into a new function
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Move topology fixup based on the platform attributes into its own
function which is called just before set_sched_topology.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v2 -> v3:
Rewrote changelog (Gautham)
Renamed to powerpc/smp: Move topology fixups into a new function
arch/powerpc/kernel/smp.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index a685915e5941..da27f6909be1 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1368,6 +1368,16 @@ int setup_profiling_timer(unsigned int multiplier)
return 0;
}
+static void fixup_topology(void)
+{
+#ifdef CONFIG_SCHED_SMT
+ if (has_big_cores) {
+ pr_info("Big cores detected but using small core scheduling\n");
+ powerpc_topology[0].mask = smallcore_smt_mask;
+ }
+#endif
+}
+
void __init smp_cpus_done(unsigned int max_cpus)
{
/*
@@ -1381,12 +1391,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
dump_numa_cpu_topology();
-#ifdef CONFIG_SCHED_SMT
- if (has_big_cores) {
- pr_info("Big cores detected but using small core scheduling\n");
- powerpc_topology[0].mask = smallcore_smt_mask;
- }
-#endif
+ fixup_topology();
set_sched_topology(powerpc_topology);
}
--
2.17.1
^ permalink raw reply related
* [PATCH v4 03/10] powerpc/smp: Move powerpc_topology above
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Just moving the powerpc_topology description above.
This will help in using functions in this file and avoid declarations.
No other functional changes
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
arch/powerpc/kernel/smp.c | 116 +++++++++++++++++++-------------------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 283a04e54f52..a685915e5941 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -818,6 +818,64 @@ static int init_cpu_l1_cache_map(int cpu)
return err;
}
+static bool shared_caches;
+
+#ifdef CONFIG_SCHED_SMT
+/* cpumask of CPUs with asymmetric SMT dependency */
+static int powerpc_smt_flags(void)
+{
+ int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
+
+ if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
+ printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
+ flags |= SD_ASYM_PACKING;
+ }
+ return flags;
+}
+#endif
+
+/*
+ * P9 has a slightly odd architecture where pairs of cores share an L2 cache.
+ * This topology makes it *much* cheaper to migrate tasks between adjacent cores
+ * since the migrated task remains cache hot. We want to take advantage of this
+ * at the scheduler level so an extra topology level is required.
+ */
+static int powerpc_shared_cache_flags(void)
+{
+ return SD_SHARE_PKG_RESOURCES;
+}
+
+/*
+ * We can't just pass cpu_l2_cache_mask() directly because
+ * returns a non-const pointer and the compiler barfs on that.
+ */
+static const struct cpumask *shared_cache_mask(int cpu)
+{
+ if (shared_caches)
+ return cpu_l2_cache_mask(cpu);
+
+ if (has_big_cores)
+ return cpu_smallcore_mask(cpu);
+
+ return per_cpu(cpu_sibling_map, cpu);
+}
+
+#ifdef CONFIG_SCHED_SMT
+static const struct cpumask *smallcore_smt_mask(int cpu)
+{
+ return cpu_smallcore_mask(cpu);
+}
+#endif
+
+static struct sched_domain_topology_level powerpc_topology[] = {
+#ifdef CONFIG_SCHED_SMT
+ { cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
+#endif
+ { shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) },
+ { cpu_cpu_mask, SD_INIT_NAME(DIE) },
+ { NULL, },
+};
+
static int init_big_cores(void)
{
int cpu;
@@ -1247,8 +1305,6 @@ static void add_cpu_to_masks(int cpu)
set_cpus_related(cpu, i, cpu_core_mask);
}
-static bool shared_caches;
-
/* Activate a secondary processor. */
void start_secondary(void *unused)
{
@@ -1312,62 +1368,6 @@ int setup_profiling_timer(unsigned int multiplier)
return 0;
}
-#ifdef CONFIG_SCHED_SMT
-/* cpumask of CPUs with asymmetric SMT dependency */
-static int powerpc_smt_flags(void)
-{
- int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
-
- if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
- printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
- flags |= SD_ASYM_PACKING;
- }
- return flags;
-}
-#endif
-
-/*
- * P9 has a slightly odd architecture where pairs of cores share an L2 cache.
- * This topology makes it *much* cheaper to migrate tasks between adjacent cores
- * since the migrated task remains cache hot. We want to take advantage of this
- * at the scheduler level so an extra topology level is required.
- */
-static int powerpc_shared_cache_flags(void)
-{
- return SD_SHARE_PKG_RESOURCES;
-}
-
-/*
- * We can't just pass cpu_l2_cache_mask() directly because
- * returns a non-const pointer and the compiler barfs on that.
- */
-static const struct cpumask *shared_cache_mask(int cpu)
-{
- if (shared_caches)
- return cpu_l2_cache_mask(cpu);
-
- if (has_big_cores)
- return cpu_smallcore_mask(cpu);
-
- return per_cpu(cpu_sibling_map, cpu);
-}
-
-#ifdef CONFIG_SCHED_SMT
-static const struct cpumask *smallcore_smt_mask(int cpu)
-{
- return cpu_smallcore_mask(cpu);
-}
-#endif
-
-static struct sched_domain_topology_level powerpc_topology[] = {
-#ifdef CONFIG_SCHED_SMT
- { cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
-#endif
- { shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) },
- { cpu_cpu_mask, SD_INIT_NAME(DIE) },
- { NULL, },
-};
-
void __init smp_cpus_done(unsigned int max_cpus)
{
/*
--
2.17.1
^ permalink raw reply related
* [PATCH v4 02/10] powerpc/smp: Merge Power9 topology with Power topology
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
A new sched_domain_topology_level was added just for Power9. However the
same can be achieved by merging powerpc_topology with power9_topology
and makes the code more simpler especially when adding a new sched
domain.
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
Replaced a reference to cpu_smt_mask with per_cpu(cpu_sibling_map, cpu)
since cpu_smt_mask is only defined under CONFIG_SCHED_SMT
arch/powerpc/kernel/smp.c | 33 ++++++++++-----------------------
1 file changed, 10 insertions(+), 23 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index edf94ca64eea..283a04e54f52 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1313,7 +1313,7 @@ int setup_profiling_timer(unsigned int multiplier)
}
#ifdef CONFIG_SCHED_SMT
-/* cpumask of CPUs with asymetric SMT dependancy */
+/* cpumask of CPUs with asymmetric SMT dependency */
static int powerpc_smt_flags(void)
{
int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
@@ -1326,14 +1326,6 @@ static int powerpc_smt_flags(void)
}
#endif
-static struct sched_domain_topology_level powerpc_topology[] = {
-#ifdef CONFIG_SCHED_SMT
- { cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
-#endif
- { cpu_cpu_mask, SD_INIT_NAME(DIE) },
- { NULL, },
-};
-
/*
* P9 has a slightly odd architecture where pairs of cores share an L2 cache.
* This topology makes it *much* cheaper to migrate tasks between adjacent cores
@@ -1351,7 +1343,13 @@ static int powerpc_shared_cache_flags(void)
*/
static const struct cpumask *shared_cache_mask(int cpu)
{
- return cpu_l2_cache_mask(cpu);
+ if (shared_caches)
+ return cpu_l2_cache_mask(cpu);
+
+ if (has_big_cores)
+ return cpu_smallcore_mask(cpu);
+
+ return per_cpu(cpu_sibling_map, cpu);
}
#ifdef CONFIG_SCHED_SMT
@@ -1361,7 +1359,7 @@ static const struct cpumask *smallcore_smt_mask(int cpu)
}
#endif
-static struct sched_domain_topology_level power9_topology[] = {
+static struct sched_domain_topology_level powerpc_topology[] = {
#ifdef CONFIG_SCHED_SMT
{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
#endif
@@ -1386,21 +1384,10 @@ void __init smp_cpus_done(unsigned int max_cpus)
#ifdef CONFIG_SCHED_SMT
if (has_big_cores) {
pr_info("Big cores detected but using small core scheduling\n");
- power9_topology[0].mask = smallcore_smt_mask;
powerpc_topology[0].mask = smallcore_smt_mask;
}
#endif
- /*
- * If any CPU detects that it's sharing a cache with another CPU then
- * use the deeper topology that is aware of this sharing.
- */
- if (shared_caches) {
- pr_info("Using shared cache scheduler topology\n");
- set_sched_topology(power9_topology);
- } else {
- pr_info("Using standard scheduler topology\n");
- set_sched_topology(powerpc_topology);
- }
+ set_sched_topology(powerpc_topology);
}
#ifdef CONFIG_HOTPLUG_CPU
--
2.17.1
^ permalink raw reply related
* [PATCH v4 00/10] Coregroup support on Powerpc
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Oliver OHalloran, Michael Neuling,
Srikar Dronamraju, Michael Ellerman, Peter Zijlstra,
Jordan Niethe, Anton Blanchard, LKML, Valentin Schneider,
Nick Piggin, linuxppc-dev, Ingo Molnar
Changelog v3 ->v4:
v3: https://lore.kernel.org/lkml/20200723085116.4731-1-srikar@linux.vnet.ibm.com/t/#u
powerpc/smp: Create coregroup domain
if coregroup_support doesn't exist, update MC mask to the next
smaller domain mask.
Changelog v2 -> v3:
v2: https://lore.kernel.org/linuxppc-dev/20200721113814.32284-1-srikar@linux.vnet.ibm.com/t/#u
powerpc/smp: Cache node for reuse
Removed node caching part. Rewrote the Commit msg (Michael Ellerman)
Renamed to powerpc/smp: Fix a warning under !NEED_MULTIPLE_NODES
powerpc/smp: Enable small core scheduling sooner
Rewrote changelog (Gautham)
Renamed to powerpc/smp: Move topology fixups into a new function
powerpc/smp: Create coregroup domain
Add optimization for mask updation under coregroup_support
Changelog v1 -> v2:
v1: https://lore.kernel.org/linuxppc-dev/20200714043624.5648-1-srikar@linux.vnet.ibm.com/t/#u
powerpc/smp: Merge Power9 topology with Power topology
Replaced a reference to cpu_smt_mask with per_cpu(cpu_sibling_map, cpu)
since cpu_smt_mask is only defined under CONFIG_SCHED_SMT
powerpc/smp: Enable small core scheduling sooner
Restored the previous info msg (Jordan)
Moved big core topology fixup to fixup_topology (Gautham)
powerpc/smp: Dont assume l2-cache to be superset of sibling
Set cpumask after verifying l2-cache. (Gautham)
powerpc/smp: Generalize 2nd sched domain
Moved shared_cache topology fixup to fixup_topology (Gautham)
Powerpc/numa: Detect support for coregroup
Explained Coregroup in commit msg (Michael Ellerman)
Powerpc/smp: Create coregroup domain
Moved coregroup topology fixup to fixup_topology (Gautham)
powerpc/smp: Implement cpu_to_coregroup_id
Move coregroup_enabled before getting associativity (Gautham)
powerpc/smp: Provide an ability to disable coregroup
Patch dropped (Michael Ellerman)
Cleanup of existing powerpc topologies and add coregroup support on
Powerpc. Coregroup is a group of (subset of) cores of a DIE that share
a resource.
Patch 7 of this patch series: "Powerpc/numa: Detect support for coregroup"
depends on
https://lore.kernel.org/linuxppc-dev/20200707140644.7241-1-srikar@linux.vnet.ibm.com/t/#u
However it should be easy to rebase the patch without the above patch.
This patch series is based on top of current powerpc/next tree + the
above patch.
On Power 8 Systems
------------------
$ tail /proc/cpuinfo
processor : 255
cpu : POWER8 (architected), altivec supported
clock : 3724.000000MHz
revision : 2.1 (pvr 004b 0201)
timebase : 512000000
platform : pSeries
model : IBM,8408-E8E
machine : CHRP IBM,8408-E8E
MMU : Hash
Before the patchset
-------------------
$ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name
SMT
DIE
NUMA
NUMA
$ head /proc/schedstat
version 15
timestamp 4295534931
cpu0 0 0 0 0 0 0 41389823338 17682779896 14117
domain0 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,00000000,00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain2 00000000,00000000,00000000,00000000,00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain3 ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
cpu1 0 0 0 0 0 0 27087859050 152273672 10396
domain0 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,00000000,00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
After the patchset
------------------
$ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name
SMT
DIE
NUMA
NUMA
$ head /proc/schedstat
version 15
timestamp 4295534931
cpu0 0 0 0 0 0 0 41389823338 17682779896 14117
domain0 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,00000000,00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain2 00000000,00000000,00000000,00000000,00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain3 ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
cpu1 0 0 0 0 0 0 27087859050 152273672 10396
domain0 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,00000000,00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
On Power 9 (with device-tree enablement to show coregroups).
(hunks for mimicing a coregroup was posted at
https://lore.kernel.org/linuxppc-dev/20200714043624.5648-1-srikar@linux.vnet.ibm.com/t/#m2cb09bb11c7a93257d6123d1d27edb8212f8af21)
-----------------------------------------------------------
$ tail /proc/cpuinfo
processor : 127
cpu : POWER9 (architected), altivec supported
clock : 3000.000000MHz
revision : 2.2 (pvr 004e 0202)
timebase : 512000000
platform : pSeries
model : IBM,9008-22L
machine : CHRP IBM,9008-22L
MMU : Hash
Before patchset
--------------
$ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name
SMT
CACHE
DIE
NUMA
$ head /proc/schedstat
version 15
timestamp 4318242208
cpu0 0 0 0 0 0 0 28077107004 4773387362 78205
domain0 00000000,00000000,00000000,00000055 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain2 00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain3 ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
cpu1 0 0 0 0 0 0 24177439200 413887604 75393
domain0 00000000,00000000,00000000,000000aa 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
After patchset
--------------
$ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name
SMT
CACHE
MC
DIE
NUMA
$ head /proc/schedstat
version 15
timestamp 4318242208
cpu0 0 0 0 0 0 0 28077107004 4773387362 78205
domain0 00000000,00000000,00000000,00000055 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain2 00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain3 00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
domain4 ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
cpu1 0 0 0 0 0 0 24177439200 413887604 75393
domain0 00000000,00000000,00000000,000000aa 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Nick Piggin <npiggin@au1.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@linux.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Srikar Dronamraju (10):
powerpc/smp: Fix a warning under !NEED_MULTIPLE_NODES
powerpc/smp: Merge Power9 topology with Power topology
powerpc/smp: Move powerpc_topology above
powerpc/smp: Move topology fixups into a new function
powerpc/smp: Dont assume l2-cache to be superset of sibling
powerpc/smp: Generalize 2nd sched domain
powerpc/numa: Detect support for coregroup
powerpc/smp: Allocate cpumask only after searching thread group
powerpc/smp: Create coregroup domain
powerpc/smp: Implement cpu_to_coregroup_id
arch/powerpc/include/asm/smp.h | 1 +
arch/powerpc/include/asm/topology.h | 10 ++
arch/powerpc/kernel/smp.c | 246 +++++++++++++++++-----------
arch/powerpc/mm/numa.c | 59 +++++--
4 files changed, 210 insertions(+), 106 deletions(-)
--
2.17.1
^ permalink raw reply
* [PATCH v4 01/10] powerpc/smp: Fix a warning under !NEED_MULTIPLE_NODES
From: Srikar Dronamraju @ 2020-07-27 5:32 UTC (permalink / raw)
To: Michael Ellerman
Cc: Nathan Lynch, Gautham R Shenoy, Michael Neuling,
Srikar Dronamraju, Peter Zijlstra, Jordan Niethe, LKML,
Nicholas Piggin, Valentin Schneider, Oliver O'Halloran,
linuxppc-dev, Ingo Molnar
In-Reply-To: <20200727053230.19753-1-srikar@linux.vnet.ibm.com>
Fix a build warning in a non CONFIG_NEED_MULTIPLE_NODES
"error: _numa_cpu_lookup_table_ undeclared"
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v2 -> v3:
Removed node caching part. Rewrote the Commit msg (Michael Ellerman)
Renamed to powerpc/smp: Fix a warning under !NEED_MULTIPLE_NODES
arch/powerpc/kernel/smp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 73199470c265..edf94ca64eea 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -860,6 +860,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
GFP_KERNEL, cpu_to_node(cpu));
zalloc_cpumask_var_node(&per_cpu(cpu_core_map, cpu),
GFP_KERNEL, cpu_to_node(cpu));
+#ifdef CONFIG_NEED_MULTIPLE_NODES
/*
* numa_node_id() works after this.
*/
@@ -868,6 +869,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
set_cpu_numa_mem(cpu,
local_memory_node(numa_cpu_lookup_table[cpu]));
}
+#endif
}
/* Init the cpumasks so the boot CPU is related to itself */
--
2.17.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox