* [PATCH v3 1/2] powerpc/watchpoint/ptrace: Fix SETHWDEBUG when CONFIG_HAVE_HW_BREAKPOINT=N
From: Ravi Bangoria @ 2020-08-05 6:27 UTC (permalink / raw)
To: mpe
Cc: christophe.leroy, ravi.bangoria, mikey, rogealve, linux-kernel,
paulus, jniethe5, pedromfc, naveen.n.rao, linuxppc-dev
In-Reply-To: <20200805062750.290289-1-ravi.bangoria@linux.ibm.com>
When kernel is compiled with CONFIG_HAVE_HW_BREAKPOINT=N, user can
still create watchpoint using PPC_PTRACE_SETHWDEBUG, with limited
functionalities. But, such watchpoints are never firing because of
the missing privilege settings. Fix that.
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Suggested-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index 697c7e4b5877..bf94ab837735 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -217,7 +217,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
return -EIO;
brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
- brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.type = HW_BRK_TYPE_TRANSLATE | HW_BRK_TYPE_USER;
brk.len = DABR_MAX_LEN;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
--
2.26.2
^ permalink raw reply related
* [PATCH v3 2/2] powerpc/watchpoint/ptrace: Introduce PPC_DEBUG_FEATURE_DATA_BP_ARCH_31
From: Ravi Bangoria @ 2020-08-05 6:27 UTC (permalink / raw)
To: mpe
Cc: christophe.leroy, ravi.bangoria, mikey, rogealve, linux-kernel,
paulus, jniethe5, pedromfc, naveen.n.rao, linuxppc-dev
In-Reply-To: <20200805062750.290289-1-ravi.bangoria@linux.ibm.com>
PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 can be used to determine whether
we are running on an ISA 3.1 compliant machine. Which is needed to
determine DAR behaviour, 512 byte boundary limit etc. This was
requested by Pedro Miraglia Franco de Carvalho for extending
watchpoint features in gdb. Note that availability of 2nd DAWR is
independent of this flag and should be checked using
ppc_debug_info->num_data_bps.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
Documentation/powerpc/ptrace.rst | 1 +
arch/powerpc/include/uapi/asm/ptrace.h | 1 +
arch/powerpc/kernel/ptrace/ptrace-noadv.c | 2 ++
3 files changed, 4 insertions(+)
diff --git a/Documentation/powerpc/ptrace.rst b/Documentation/powerpc/ptrace.rst
index 864d4b6dddd1..77725d69eb4a 100644
--- a/Documentation/powerpc/ptrace.rst
+++ b/Documentation/powerpc/ptrace.rst
@@ -46,6 +46,7 @@ features will have bits indicating whether there is support for::
#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
#define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10
+ #define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 0x20
2. PTRACE_SETHWDEBUG
diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
index f5f1ccc740fc..7004cfea3f5f 100644
--- a/arch/powerpc/include/uapi/asm/ptrace.h
+++ b/arch/powerpc/include/uapi/asm/ptrace.h
@@ -222,6 +222,7 @@ struct ppc_debug_info {
#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x0000000000000004
#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x0000000000000008
#define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x0000000000000010
+#define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 0x0000000000000020
#ifndef __ASSEMBLY__
diff --git a/arch/powerpc/kernel/ptrace/ptrace-noadv.c b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
index bf94ab837735..d5be73ab9e74 100644
--- a/arch/powerpc/kernel/ptrace/ptrace-noadv.c
+++ b/arch/powerpc/kernel/ptrace/ptrace-noadv.c
@@ -57,6 +57,8 @@ void ppc_gethwdinfo(struct ppc_debug_info *dbginfo)
} else {
dbginfo->features = 0;
}
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ dbginfo->features |= PPC_DEBUG_FEATURE_DATA_BP_ARCH_31;
}
int ptrace_get_debugreg(struct task_struct *child, unsigned long addr,
--
2.26.2
^ permalink raw reply related
* [PATCH v3 0/3] refine and clean code for synchronous mode
From: Shengjiu Wang @ 2020-08-05 6:34 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel
refine and clean code for synchronous mode
Shengjiu Wang (3):
ASoC: fsl_sai: Refine enable/disable TE/RE sequence in trigger()
ASoC: fsl_sai: Drop TMR/RMR settings for synchronous mode
ASoC: fsl_sai: Replace synchronous check with fsl_sai_dir_is_synced
changes in v3:
- Add reviewed-by Nicolin
- refine the commit log.
- Add one more patch #3
changes in v2:
- Split the commit
- refine the sequence in trigger stop
sound/soc/fsl/fsl_sai.c | 173 +++++++++++++++++++++++-----------------
1 file changed, 102 insertions(+), 71 deletions(-)
--
2.27.0
^ permalink raw reply
* [PATCH v3 1/3] ASoC: fsl_sai: Refine enable/disable TE/RE sequence in trigger()
From: Shengjiu Wang @ 2020-08-05 6:34 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel
In-Reply-To: <20200805063413.4610-1-shengjiu.wang@nxp.com>
Current code enables TCSR.TE and RCSR.RE together, and disable
TCSR.TE and RCSR.RE together in trigger(), which only supports
one operation mode：
1. Rx synchronous with Tx: TE is last enabled and first disabled
Other operation mode need to be considered also:
2. Tx synchronous with Rx: RE is last enabled and first disabled.
3. Asynchronous mode: Tx and Rx are independent.
So the enable TCSR.TE and RCSR.RE sequence and the disable
sequence need to be refined accordingly for #2 and #3.
There is slightly against what RM recommennds with this change.
For example in Rx synchronous with Tx mode, case "aplay 1.wav;
arecord 2.wav" enable TE before RE. But it should be safe to
do so, judging by years of testing results.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_sai.c | 126 +++++++++++++++++++++++++++-------------
1 file changed, 85 insertions(+), 41 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index cdff739924e2..566c4747362a 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -37,6 +37,24 @@ static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = {
.list = fsl_sai_rates,
};
+/**
+ * fsl_sai_dir_is_synced - Check if stream is synced by the opposite stream
+ *
+ * SAI supports synchronous mode using bit/frame clocks of either Transmitter's
+ * or Receiver's for both streams. This function is used to check if clocks of
+ * the stream's are synced by the opposite stream.
+ *
+ * @sai: SAI context
+ * @dir: stream direction
+ */
+static inline bool fsl_sai_dir_is_synced(struct fsl_sai *sai, int dir)
+{
+ int adir = (dir == TX) ? RX : TX;
+
+ /* current dir in async mode while opposite dir in sync mode */
+ return !sai->synchronous[dir] && sai->synchronous[adir];
+}
+
static irqreturn_t fsl_sai_isr(int irq, void *devid)
{
struct fsl_sai *sai = (struct fsl_sai *)devid;
@@ -522,6 +540,38 @@ static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
return 0;
}
+static void fsl_sai_config_disable(struct fsl_sai *sai, int dir)
+{
+ unsigned int ofs = sai->soc_data->reg_offset;
+ bool tx = dir == TX;
+ u32 xcsr, count = 100;
+
+ regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
+ FSL_SAI_CSR_TERE, 0);
+
+ /* TERE will remain set till the end of current frame */
+ do {
+ udelay(10);
+ regmap_read(sai->regmap, FSL_SAI_xCSR(tx, ofs), &xcsr);
+ } while (--count && xcsr & FSL_SAI_CSR_TERE);
+
+ regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
+ FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
+
+ /*
+ * For sai master mode, after several open/close sai,
+ * there will be no frame clock, and can't recover
+ * anymore. Add software reset to fix this issue.
+ * This is a hardware bug, and will be fix in the
+ * next sai version.
+ */
+ if (!sai->is_slave_mode) {
+ /* Software Reset */
+ regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
+ /* Clear SR bit to finish the reset */
+ regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
+ }
+}
static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *cpu_dai)
@@ -530,7 +580,9 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
unsigned int ofs = sai->soc_data->reg_offset;
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- u32 xcsr, count = 100;
+ int adir = tx ? RX : TX;
+ int dir = tx ? TX : RX;
+ u32 xcsr;
/*
* Asynchronous mode: Clear SYNC for both Tx and Rx.
@@ -553,10 +605,22 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
- FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
+ regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
+ /*
+ * Enable the opposite direction for synchronous mode
+ * 1. Tx sync with Rx: only set RE for Rx; set TE & RE for Tx
+ * 2. Rx sync with Tx: only set TE for Tx; set RE & TE for Rx
+ *
+ * RM recommends to enable RE after TE for case 1 and to enable
+ * TE after RE for case 2, but we here may not always guarantee
+ * that happens: "arecord 1.wav; aplay 2.wav" in case 1 enables
+ * TE after RE, which is against what RM recommends but should
+ * be safe to do, judging by years of testing results.
+ */
+ if (fsl_sai_dir_is_synced(sai, adir))
+ regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx), ofs),
+ FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
@@ -571,43 +635,23 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
/* Check if the opposite FRDE is also disabled */
regmap_read(sai->regmap, FSL_SAI_xCSR(!tx, ofs), &xcsr);
- if (!(xcsr & FSL_SAI_CSR_FRDE)) {
- /* Disable both directions and reset their FIFOs */
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
- FSL_SAI_CSR_TERE, 0);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
- FSL_SAI_CSR_TERE, 0);
-
- /* TERE will remain set till the end of current frame */
- do {
- udelay(10);
- regmap_read(sai->regmap,
- FSL_SAI_xCSR(tx, ofs), &xcsr);
- } while (--count && xcsr & FSL_SAI_CSR_TERE);
-
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
- FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
- FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
-
- /*
- * For sai master mode, after several open/close sai,
- * there will be no frame clock, and can't recover
- * anymore. Add software reset to fix this issue.
- * This is a hardware bug, and will be fix in the
- * next sai version.
- */
- if (!sai->is_slave_mode) {
- /* Software Reset for both Tx and Rx */
- regmap_write(sai->regmap, FSL_SAI_TCSR(ofs),
- FSL_SAI_CSR_SR);
- regmap_write(sai->regmap, FSL_SAI_RCSR(ofs),
- FSL_SAI_CSR_SR);
- /* Clear SR bit to finish the reset */
- regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
- regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
- }
- }
+
+ /*
+ * If opposite stream provides clocks for synchronous mode and
+ * it is inactive, disable it before disabling the current one
+ */
+ if (fsl_sai_dir_is_synced(sai, adir) && !(xcsr & FSL_SAI_CSR_FRDE))
+ fsl_sai_config_disable(sai, adir);
+
+ /*
+ * Disable current stream if either of:
+ * 1. current stream doesn't provide clocks for synchronous mode
+ * 2. current stream provides clocks for synchronous mode but no
+ * more stream is active.
+ */
+ if (!fsl_sai_dir_is_synced(sai, dir) || !(xcsr & FSL_SAI_CSR_FRDE))
+ fsl_sai_config_disable(sai, dir);
+
break;
default:
return -EINVAL;
--
2.27.0
^ permalink raw reply related
* [PATCH v3 2/3] ASoC: fsl_sai: Drop TMR/RMR settings for synchronous mode
From: Shengjiu Wang @ 2020-08-05 6:34 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel
In-Reply-To: <20200805063413.4610-1-shengjiu.wang@nxp.com>
Tx synchronous with Rx: The RMR is the word mask register, it is used
to mask any word in the frame, it is not relating to clock generation,
So it is no need to be changed when Tx is going to be enabled.
Rx synchronous with Tx: The TMR is the word mask register, it is used
to mask any word in the frame, it is not relating to clock generation,
So it is no need to be changed when Rx is going to be enabled.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_sai.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 566c4747362a..334090d581ae 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -488,8 +488,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
/*
* For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
* generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
- * RCR5(TCR5) and RMR(TMR) for playback(capture), or there will be sync
- * error.
+ * RCR5(TCR5) for playback(capture), or there will be sync error.
*/
if (!sai->is_slave_mode) {
@@ -500,8 +499,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, FSL_SAI_TCR5(ofs),
FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
FSL_SAI_CR5_FBT_MASK, val_cr5);
- regmap_write(sai->regmap, FSL_SAI_TMR,
- ~0UL - ((1 << channels) - 1));
} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
regmap_update_bits(sai->regmap, FSL_SAI_RCR4(ofs),
FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
@@ -509,8 +506,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, FSL_SAI_RCR5(ofs),
FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
FSL_SAI_CR5_FBT_MASK, val_cr5);
- regmap_write(sai->regmap, FSL_SAI_RMR,
- ~0UL - ((1 << channels) - 1));
}
}
--
2.27.0
^ permalink raw reply related
* [PATCH v3 3/3] ASoC: fsl_sai: Replace synchronous check with fsl_sai_dir_is_synced
From: Shengjiu Wang @ 2020-08-05 6:34 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel
In-Reply-To: <20200805063413.4610-1-shengjiu.wang@nxp.com>
As new function fsl_sai_dir_is_synced is included for checking if
stream is synced by the opposite stream, then replace the existing
synchronous checking with this new function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_sai.c | 40 ++++++++++++++++------------------------
1 file changed, 16 insertions(+), 24 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 334090d581ae..f6969a5d49e3 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -350,6 +350,8 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
unsigned int ofs = sai->soc_data->reg_offset;
unsigned long clk_rate;
u32 savediv = 0, ratio, savesub = freq;
+ int adir = tx ? RX : TX;
+ int dir = tx ? TX : RX;
u32 id;
int ret = 0;
@@ -408,19 +410,17 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
* 4) For Tx and Rx are both Synchronous with another SAI, we just
* ignore it.
*/
- if ((sai->synchronous[TX] && !sai->synchronous[RX]) ||
- (!tx && !sai->synchronous[RX])) {
- regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs),
+ if (fsl_sai_dir_is_synced(sai, adir)) {
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(!tx, ofs),
FSL_SAI_CR2_MSEL_MASK,
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
- regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs),
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(!tx, ofs),
FSL_SAI_CR2_DIV_MASK, savediv - 1);
- } else if ((sai->synchronous[RX] && !sai->synchronous[TX]) ||
- (tx && !sai->synchronous[TX])) {
- regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs),
+ } else if (!sai->synchronous[dir]) {
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
FSL_SAI_CR2_MSEL_MASK,
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
- regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs),
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
FSL_SAI_CR2_DIV_MASK, savediv - 1);
}
@@ -442,6 +442,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
u32 val_cr4 = 0, val_cr5 = 0;
u32 slots = (channels == 1) ? 2 : channels;
u32 slot_width = word_width;
+ int adir = tx ? RX : TX;
int ret;
if (sai->slots)
@@ -491,22 +492,13 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
* RCR5(TCR5) for playback(capture), or there will be sync error.
*/
- if (!sai->is_slave_mode) {
- if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) {
- regmap_update_bits(sai->regmap, FSL_SAI_TCR4(ofs),
- FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- val_cr4);
- regmap_update_bits(sai->regmap, FSL_SAI_TCR5(ofs),
- FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- FSL_SAI_CR5_FBT_MASK, val_cr5);
- } else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
- regmap_update_bits(sai->regmap, FSL_SAI_RCR4(ofs),
- FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
- val_cr4);
- regmap_update_bits(sai->regmap, FSL_SAI_RCR5(ofs),
- FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
- FSL_SAI_CR5_FBT_MASK, val_cr5);
- }
+ if (!sai->is_slave_mode && fsl_sai_dir_is_synced(sai, adir)) {
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR4(!tx, ofs),
+ FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
+ val_cr4);
+ regmap_update_bits(sai->regmap, FSL_SAI_xCR5(!tx, ofs),
+ FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
+ FSL_SAI_CR5_FBT_MASK, val_cr5);
}
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
--
2.27.0
^ permalink raw reply related
* Re: [PATCH v3 3/3] ASoC: fsl_sai: Replace synchronous check with fsl_sai_dir_is_synced
From: Nicolin Chen @ 2020-08-05 6:55 UTC (permalink / raw)
To: Shengjiu Wang
Cc: alsa-devel, timur, Xiubo.Lee, linuxppc-dev, tiwai, lgirdwood,
perex, broonie, festevam, linux-kernel
In-Reply-To: <20200805063413.4610-4-shengjiu.wang@nxp.com>
On Wed, Aug 05, 2020 at 02:34:13PM +0800, Shengjiu Wang wrote:
> As new function fsl_sai_dir_is_synced is included for checking if
> stream is synced by the opposite stream, then replace the existing
> synchronous checking with this new function.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Nice, thanks!
^ permalink raw reply
* [PATCH v10 3/5] powerpc/vdso: Save and restore TOC pointer on PPC64
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
In-Reply-To: <cover.1596611196.git.christophe.leroy@csgroup.eu>
On PPC64, the TOC pointer needs to be saved and restored.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v9: New.
I'm not sure this is really needed, I can't see the VDSO C code doing
anything with r2, at least on ppc64_defconfig.
So I let you decide whether you take it or not.
---
arch/powerpc/include/asm/vdso/gettimeofday.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/powerpc/include/asm/vdso/gettimeofday.h b/arch/powerpc/include/asm/vdso/gettimeofday.h
index e2c462796a22..8ed4329c9fb8 100644
--- a/arch/powerpc/include/asm/vdso/gettimeofday.h
+++ b/arch/powerpc/include/asm/vdso/gettimeofday.h
@@ -19,10 +19,16 @@
.cfi_register lr, r0
PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
PPC_STL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+#ifdef CONFIG_PPC64
+ PPC_STL r2, STACK_FRAME_OVERHEAD + STK_GOT(r1)
+#endif
get_datapage r5, r0
addi r5, r5, VDSO_DATA_OFFSET
bl \funct
PPC_LL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+#ifdef CONFIG_PPC64
+ PPC_LL r2, STACK_FRAME_OVERHEAD + STK_GOT(r1)
+#endif
cmpwi r3, 0
mtlr r0
.cfi_restore lr
@@ -42,10 +48,16 @@
.cfi_register lr, r0
PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
PPC_STL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+#ifdef CONFIG_PPC64
+ PPC_STL r2, STACK_FRAME_OVERHEAD + STK_GOT(r1)
+#endif
get_datapage r4, r0
addi r4, r4, VDSO_DATA_OFFSET
bl \funct
PPC_LL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+#ifdef CONFIG_PPC64
+ PPC_LL r2, STACK_FRAME_OVERHEAD + STK_GOT(r1)
+#endif
crclr so
mtlr r0
.cfi_restore lr
--
2.25.0
^ permalink raw reply related
* [PATCH v10 0/5] powerpc: switch VDSO to C implementation
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
This is the tenth version of a series to switch powerpc VDSO to
generic C implementation.
Changes since v10 are:
- Added a comment explaining the reason for the double stack frame
- Moved back .cfi_register lr next to mflr
Main changes since v9 are:
- Dropped the patches which put the VDSO datapage in front of VDSO text in the mapping
- Adds a second stack frame because the caller doesn't set one, at least on PPC64
- Saving the TOC pointer on PPC64 (is that really needed ?)
This series applies on today's powerpc/merge branch.
See the last patches for details on changes and performance.
Christophe Leroy (5):
powerpc/processor: Move cpu_relax() into asm/vdso/processor.h
powerpc/vdso: Prepare for switching VDSO to generic C implementation.
powerpc/vdso: Save and restore TOC pointer on PPC64
powerpc/vdso: Switch VDSO to generic C implementation.
powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32
arch/powerpc/Kconfig | 2 +
arch/powerpc/include/asm/clocksource.h | 7 +
arch/powerpc/include/asm/processor.h | 13 +-
arch/powerpc/include/asm/vdso/clocksource.h | 7 +
arch/powerpc/include/asm/vdso/gettimeofday.h | 197 ++++++++++++
arch/powerpc/include/asm/vdso/processor.h | 23 ++
arch/powerpc/include/asm/vdso/vsyscall.h | 25 ++
arch/powerpc/include/asm/vdso_datapage.h | 40 +--
arch/powerpc/kernel/asm-offsets.c | 49 +--
arch/powerpc/kernel/time.c | 91 +-----
arch/powerpc/kernel/vdso.c | 5 +-
arch/powerpc/kernel/vdso32/Makefile | 32 +-
arch/powerpc/kernel/vdso32/config-fake32.h | 34 +++
arch/powerpc/kernel/vdso32/gettimeofday.S | 300 +------------------
arch/powerpc/kernel/vdso32/vdso32.lds.S | 1 +
arch/powerpc/kernel/vdso32/vgettimeofday.c | 35 +++
arch/powerpc/kernel/vdso64/Makefile | 23 +-
arch/powerpc/kernel/vdso64/gettimeofday.S | 242 +--------------
arch/powerpc/kernel/vdso64/vgettimeofday.c | 29 ++
19 files changed, 453 insertions(+), 702 deletions(-)
create mode 100644 arch/powerpc/include/asm/clocksource.h
create mode 100644 arch/powerpc/include/asm/vdso/clocksource.h
create mode 100644 arch/powerpc/include/asm/vdso/gettimeofday.h
create mode 100644 arch/powerpc/include/asm/vdso/processor.h
create mode 100644 arch/powerpc/include/asm/vdso/vsyscall.h
create mode 100644 arch/powerpc/kernel/vdso32/config-fake32.h
create mode 100644 arch/powerpc/kernel/vdso32/vgettimeofday.c
create mode 100644 arch/powerpc/kernel/vdso64/vgettimeofday.c
--
2.25.0
^ permalink raw reply
* [PATCH v10 1/5] powerpc/processor: Move cpu_relax() into asm/vdso/processor.h
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
In-Reply-To: <cover.1596611196.git.christophe.leroy@csgroup.eu>
cpu_relax() need to be in asm/vdso/processor.h to be used by
the C VDSO generic library.
Move it there.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v9: Forgot to remove cpu_relax() from processor.h in v8
---
arch/powerpc/include/asm/processor.h | 13 ++-----------
arch/powerpc/include/asm/vdso/processor.h | 23 +++++++++++++++++++++++
2 files changed, 25 insertions(+), 11 deletions(-)
create mode 100644 arch/powerpc/include/asm/vdso/processor.h
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index ed0d633ab5aa..c1ba9c8d9b90 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -6,6 +6,8 @@
* Copyright (C) 2001 PPC 64 Team, IBM Corp
*/
+#include <vdso/processor.h>
+
#include <asm/reg.h>
#ifdef CONFIG_VSX
@@ -63,14 +65,6 @@ extern int _chrp_type;
#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
-/* Macros for adjusting thread priority (hardware multi-threading) */
-#define HMT_very_low() asm volatile("or 31,31,31 # very low priority")
-#define HMT_low() asm volatile("or 1,1,1 # low priority")
-#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority")
-#define HMT_medium() asm volatile("or 2,2,2 # medium priority")
-#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority")
-#define HMT_high() asm volatile("or 3,3,3 # high priority")
-
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
@@ -350,7 +344,6 @@ static inline unsigned long __pack_fe01(unsigned int fpmode)
}
#ifdef CONFIG_PPC64
-#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0)
#define spin_begin() HMT_low()
@@ -369,8 +362,6 @@ do { \
} \
} while (0)
-#else
-#define cpu_relax() barrier()
#endif
/* Check that a certain kernel stack pointer is valid in task_struct p */
diff --git a/arch/powerpc/include/asm/vdso/processor.h b/arch/powerpc/include/asm/vdso/processor.h
new file mode 100644
index 000000000000..39b9beace9ca
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso/processor.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_VDSO_PROCESSOR_H
+#define __ASM_VDSO_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+/* Macros for adjusting thread priority (hardware multi-threading) */
+#define HMT_very_low() asm volatile("or 31, 31, 31 # very low priority")
+#define HMT_low() asm volatile("or 1, 1, 1 # low priority")
+#define HMT_medium_low() asm volatile("or 6, 6, 6 # medium low priority")
+#define HMT_medium() asm volatile("or 2, 2, 2 # medium priority")
+#define HMT_medium_high() asm volatile("or 5, 5, 5 # medium high priority")
+#define HMT_high() asm volatile("or 3, 3, 3 # high priority")
+
+#ifdef CONFIG_PPC64
+#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0)
+#else
+#define cpu_relax() barrier()
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_PROCESSOR_H */
--
2.25.0
^ permalink raw reply related
* [PATCH v10 5/5] powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
In-Reply-To: <cover.1596611196.git.christophe.leroy@csgroup.eu>
Provides __kernel_clock_gettime64() on vdso32. This is the
64 bits version of __kernel_clock_gettime() which is
y2038 compliant.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/vdso32/gettimeofday.S | 9 +++++++++
arch/powerpc/kernel/vdso32/vdso32.lds.S | 1 +
arch/powerpc/kernel/vdso32/vgettimeofday.c | 6 ++++++
3 files changed, 16 insertions(+)
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index fd7b01c51281..a6e29f880e0e 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -35,6 +35,15 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
cvdso_call __c_kernel_clock_gettime
V_FUNCTION_END(__kernel_clock_gettime)
+/*
+ * Exact prototype of clock_gettime64()
+ *
+ * int __kernel_clock_gettime64(clockid_t clock_id, struct __timespec64 *ts);
+ *
+ */
+V_FUNCTION_BEGIN(__kernel_clock_gettime64)
+ cvdso_call __c_kernel_clock_gettime64
+V_FUNCTION_END(__kernel_clock_gettime64)
/*
* Exact prototype of clock_getres()
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 4c985467a668..582c5b046cc9 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -148,6 +148,7 @@ VERSION
#ifndef CONFIG_PPC_BOOK3S_601
__kernel_gettimeofday;
__kernel_clock_gettime;
+ __kernel_clock_gettime64;
__kernel_clock_getres;
__kernel_time;
__kernel_get_tbfreq;
diff --git a/arch/powerpc/kernel/vdso32/vgettimeofday.c b/arch/powerpc/kernel/vdso32/vgettimeofday.c
index 0b9ab4c22ef2..f7f71fecf4ed 100644
--- a/arch/powerpc/kernel/vdso32/vgettimeofday.c
+++ b/arch/powerpc/kernel/vdso32/vgettimeofday.c
@@ -11,6 +11,12 @@ int __c_kernel_clock_gettime(clockid_t clock, struct old_timespec32 *ts,
return __cvdso_clock_gettime32_data(vd, clock, ts);
}
+int __c_kernel_clock_gettime64(clockid_t clock, struct __kernel_timespec *ts,
+ const struct vdso_data *vd)
+{
+ return __cvdso_clock_gettime_data(vd, clock, ts);
+}
+
int __c_kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz,
const struct vdso_data *vd)
{
--
2.25.0
^ permalink raw reply related
* [PATCH v10 4/5] powerpc/vdso: Switch VDSO to generic C implementation.
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
In-Reply-To: <cover.1596611196.git.christophe.leroy@csgroup.eu>
For VDSO32 on PPC64, we create a fake 32 bits config, on the same
principle as MIPS architecture, in order to get the correct parts of
the different asm header files.
With the C VDSO, the performance is slightly lower, but it is worth
it as it will ease maintenance and evolution, and also brings clocks
that are not supported with the ASM VDSO.
On an 8xx at 132 MHz, vdsotest with the ASM VDSO:
gettimeofday: vdso: 828 nsec/call
clock-getres-realtime-coarse: vdso: 391 nsec/call
clock-gettime-realtime-coarse: vdso: 614 nsec/call
clock-getres-realtime: vdso: 460 nsec/call
clock-gettime-realtime: vdso: 876 nsec/call
clock-getres-monotonic-coarse: vdso: 399 nsec/call
clock-gettime-monotonic-coarse: vdso: 691 nsec/call
clock-getres-monotonic: vdso: 460 nsec/call
clock-gettime-monotonic: vdso: 1026 nsec/call
On an 8xx at 132 MHz, vdsotest with the C VDSO:
gettimeofday: vdso: 955 nsec/call
clock-getres-realtime-coarse: vdso: 545 nsec/call
clock-gettime-realtime-coarse: vdso: 592 nsec/call
clock-getres-realtime: vdso: 545 nsec/call
clock-gettime-realtime: vdso: 941 nsec/call
clock-getres-monotonic-coarse: vdso: 545 nsec/call
clock-gettime-monotonic-coarse: vdso: 591 nsec/call
clock-getres-monotonic: vdso: 545 nsec/call
clock-gettime-monotonic: vdso: 940 nsec/call
It is even better for gettime with monotonic clocks.
Unsupported clocks with ASM VDSO:
clock-gettime-boottime: vdso: 3851 nsec/call
clock-gettime-tai: vdso: 3852 nsec/call
clock-gettime-monotonic-raw: vdso: 3396 nsec/call
Same clocks with C VDSO:
clock-gettime-tai: vdso: 941 nsec/call
clock-gettime-monotonic-raw: vdso: 1001 nsec/call
clock-gettime-monotonic-coarse: vdso: 591 nsec/call
On an 8321E at 333 MHz, vdsotest with the ASM VDSO:
gettimeofday: vdso: 220 nsec/call
clock-getres-realtime-coarse: vdso: 102 nsec/call
clock-gettime-realtime-coarse: vdso: 178 nsec/call
clock-getres-realtime: vdso: 129 nsec/call
clock-gettime-realtime: vdso: 235 nsec/call
clock-getres-monotonic-coarse: vdso: 105 nsec/call
clock-gettime-monotonic-coarse: vdso: 208 nsec/call
clock-getres-monotonic: vdso: 129 nsec/call
clock-gettime-monotonic: vdso: 274 nsec/call
On an 8321E at 333 MHz, vdsotest with the C VDSO:
gettimeofday: vdso: 272 nsec/call
clock-getres-realtime-coarse: vdso: 160 nsec/call
clock-gettime-realtime-coarse: vdso: 184 nsec/call
clock-getres-realtime: vdso: 166 nsec/call
clock-gettime-realtime: vdso: 281 nsec/call
clock-getres-monotonic-coarse: vdso: 160 nsec/call
clock-gettime-monotonic-coarse: vdso: 184 nsec/call
clock-getres-monotonic: vdso: 169 nsec/call
clock-gettime-monotonic: vdso: 275 nsec/call
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v9:
- Rebased (Impact on arch/powerpc/kernel/vdso??/Makefile
v7:
- Split out preparatory changes in a new preceding patch
- Added -fasynchronous-unwind-tables to CC flags.
v6:
- Added missing prototypes in asm/vdso/gettimeofday.h for __c_kernel_ functions.
- Using STACK_FRAME_OVERHEAD instead of INT_FRAME_SIZE
- Rebased on powerpc/merge as of 7 Apr 2020
- Fixed build failure with gcc 9
- Added a patch to create asm/vdso/processor.h and more cpu_relax() in it
---
arch/powerpc/Kconfig | 2 +
arch/powerpc/include/asm/vdso/vsyscall.h | 25 ++
arch/powerpc/include/asm/vdso_datapage.h | 40 +--
arch/powerpc/kernel/asm-offsets.c | 49 +---
arch/powerpc/kernel/time.c | 91 +------
arch/powerpc/kernel/vdso.c | 5 +-
arch/powerpc/kernel/vdso32/Makefile | 32 ++-
arch/powerpc/kernel/vdso32/config-fake32.h | 34 +++
arch/powerpc/kernel/vdso32/gettimeofday.S | 291 +--------------------
arch/powerpc/kernel/vdso64/Makefile | 23 +-
arch/powerpc/kernel/vdso64/gettimeofday.S | 242 +----------------
11 files changed, 143 insertions(+), 691 deletions(-)
create mode 100644 arch/powerpc/include/asm/vdso/vsyscall.h
create mode 100644 arch/powerpc/kernel/vdso32/config-fake32.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8c7656cc10eb..9977ab939b42 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -171,6 +171,7 @@ config PPC
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL
+ select GENERIC_GETTIMEOFDAY
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HUGE_VMAP if PPC_BOOK3S_64 && PPC_RADIX_MMU
select HAVE_ARCH_JUMP_LABEL
@@ -202,6 +203,7 @@ config PPC
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC
+ select HAVE_GENERIC_VDSO
select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
select HAVE_IDE
select HAVE_IOREMAP_PROT
diff --git a/arch/powerpc/include/asm/vdso/vsyscall.h b/arch/powerpc/include/asm/vdso/vsyscall.h
new file mode 100644
index 000000000000..c56a030c0623
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso/vsyscall.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSO_VSYSCALL_H
+#define __ASM_VDSO_VSYSCALL_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/timekeeper_internal.h>
+#include <asm/vdso_datapage.h>
+
+/*
+ * Update the vDSO data page to keep in sync with kernel timekeeping.
+ */
+static __always_inline
+struct vdso_data *__arch_get_k_vdso_data(void)
+{
+ return vdso_data->data;
+}
+#define __arch_get_k_vdso_data __arch_get_k_vdso_data
+
+/* The asm-generic header needs to be included after the definitions above */
+#include <asm-generic/vdso/vsyscall.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index b9ef6cf50ea5..c4d320504d26 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -36,6 +36,7 @@
#include <linux/unistd.h>
#include <linux/time.h>
+#include <vdso/datapage.h>
#define SYSCALL_MAP_SIZE ((NR_syscalls + 31) / 32)
@@ -45,7 +46,7 @@
#ifdef CONFIG_PPC64
-struct vdso_data {
+struct vdso_arch_data {
__u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */
struct { /* Systemcfg version numbers */
__u32 major; /* Major number 0x10 */
@@ -59,13 +60,13 @@ struct vdso_data {
__u32 processor; /* Processor type 0x1C */
__u64 processorCount; /* # of physical processors 0x20 */
__u64 physicalMemorySize; /* Size of real memory(B) 0x28 */
- __u64 tb_orig_stamp; /* Timebase at boot 0x30 */
+ __u64 tb_orig_stamp; /* (NU) Timebase at boot 0x30 */
__u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */
- __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */
- __u64 stamp_xsec; /* 0x48 */
- __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */
- __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */
- __u32 tz_dsttime; /* Type of dst correction 0x5C */
+ __u64 tb_to_xs; /* (NU) Inverse of TB to 2^20 0x40 */
+ __u64 stamp_xsec; /* (NU) 0x48 */
+ __u64 tb_update_count; /* (NU) Timebase atomicity ctr 0x50 */
+ __u32 tz_minuteswest; /* (NU) Min. west of Greenwich 0x58 */
+ __u32 tz_dsttime; /* (NU) Type of dst correction 0x5C */
__u32 dcache_size; /* L1 d-cache size 0x60 */
__u32 dcache_line_size; /* L1 d-cache line size 0x64 */
__u32 icache_size; /* L1 i-cache size 0x68 */
@@ -78,14 +79,10 @@ struct vdso_data {
__u32 icache_block_size; /* L1 i-cache block size */
__u32 dcache_log_block_size; /* L1 d-cache log block size */
__u32 icache_log_block_size; /* L1 i-cache log block size */
- __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */
- __s32 wtom_clock_nsec; /* Wall to monotonic clock nsec */
- __s64 wtom_clock_sec; /* Wall to monotonic clock sec */
- __s64 stamp_xtime_sec; /* xtime secs as at tb_orig_stamp */
- __s64 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */
- __u32 hrtimer_res; /* hrtimer resolution */
__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+
+ struct vdso_data data[CS_BASES];
};
#else /* CONFIG_PPC64 */
@@ -93,26 +90,15 @@ struct vdso_data {
/*
* And here is the simpler 32 bits version
*/
-struct vdso_data {
- __u64 tb_orig_stamp; /* Timebase at boot 0x30 */
+struct vdso_arch_data {
__u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */
- __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */
- __u64 stamp_xsec; /* 0x48 */
- __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */
- __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */
- __u32 tz_dsttime; /* Type of dst correction 0x5C */
- __s32 wtom_clock_sec; /* Wall to monotonic clock */
- __s32 wtom_clock_nsec;
- __s32 stamp_xtime_sec; /* xtime seconds as at tb_orig_stamp */
- __s32 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */
- __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */
- __u32 hrtimer_res; /* hrtimer resolution */
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+ struct vdso_data data[CS_BASES];
};
#endif /* CONFIG_PPC64 */
-extern struct vdso_data *vdso_data;
+extern struct vdso_arch_data *vdso_data;
#else /* __ASSEMBLY__ */
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 8711c2164b45..684260186dbf 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -397,47 +397,16 @@ int main(void)
#endif /* ! CONFIG_PPC64 */
/* datapage offsets for use by vdso */
- OFFSET(CFG_TB_ORIG_STAMP, vdso_data, tb_orig_stamp);
- OFFSET(CFG_TB_TICKS_PER_SEC, vdso_data, tb_ticks_per_sec);
- OFFSET(CFG_TB_TO_XS, vdso_data, tb_to_xs);
- OFFSET(CFG_TB_UPDATE_COUNT, vdso_data, tb_update_count);
- OFFSET(CFG_TZ_MINUTEWEST, vdso_data, tz_minuteswest);
- OFFSET(CFG_TZ_DSTTIME, vdso_data, tz_dsttime);
- OFFSET(CFG_SYSCALL_MAP32, vdso_data, syscall_map_32);
- OFFSET(WTOM_CLOCK_SEC, vdso_data, wtom_clock_sec);
- OFFSET(WTOM_CLOCK_NSEC, vdso_data, wtom_clock_nsec);
- OFFSET(STAMP_XTIME_SEC, vdso_data, stamp_xtime_sec);
- OFFSET(STAMP_XTIME_NSEC, vdso_data, stamp_xtime_nsec);
- OFFSET(STAMP_SEC_FRAC, vdso_data, stamp_sec_fraction);
- OFFSET(CLOCK_HRTIMER_RES, vdso_data, hrtimer_res);
+ OFFSET(VDSO_DATA_OFFSET, vdso_arch_data, data);
+ OFFSET(CFG_TB_TICKS_PER_SEC, vdso_arch_data, tb_ticks_per_sec);
+ OFFSET(CFG_SYSCALL_MAP32, vdso_arch_data, syscall_map_32);
#ifdef CONFIG_PPC64
- OFFSET(CFG_ICACHE_BLOCKSZ, vdso_data, icache_block_size);
- OFFSET(CFG_DCACHE_BLOCKSZ, vdso_data, dcache_block_size);
- OFFSET(CFG_ICACHE_LOGBLOCKSZ, vdso_data, icache_log_block_size);
- OFFSET(CFG_DCACHE_LOGBLOCKSZ, vdso_data, dcache_log_block_size);
- OFFSET(CFG_SYSCALL_MAP64, vdso_data, syscall_map_64);
- OFFSET(TVAL64_TV_SEC, __kernel_old_timeval, tv_sec);
- OFFSET(TVAL64_TV_USEC, __kernel_old_timeval, tv_usec);
-#endif
- OFFSET(TSPC64_TV_SEC, __kernel_timespec, tv_sec);
- OFFSET(TSPC64_TV_NSEC, __kernel_timespec, tv_nsec);
- OFFSET(TVAL32_TV_SEC, old_timeval32, tv_sec);
- OFFSET(TVAL32_TV_USEC, old_timeval32, tv_usec);
- OFFSET(TSPC32_TV_SEC, old_timespec32, tv_sec);
- OFFSET(TSPC32_TV_NSEC, old_timespec32, tv_nsec);
- /* timeval/timezone offsets for use by vdso */
- OFFSET(TZONE_TZ_MINWEST, timezone, tz_minuteswest);
- OFFSET(TZONE_TZ_DSTTIME, timezone, tz_dsttime);
-
- /* Other bits used by the vdso */
- DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
- DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
- DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
- DEFINE(CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE);
- DEFINE(CLOCK_MAX, CLOCK_TAI);
- DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
- DEFINE(EINVAL, EINVAL);
- DEFINE(KTIME_LOW_RES, KTIME_LOW_RES);
+ OFFSET(CFG_ICACHE_BLOCKSZ, vdso_arch_data, icache_block_size);
+ OFFSET(CFG_DCACHE_BLOCKSZ, vdso_arch_data, dcache_block_size);
+ OFFSET(CFG_ICACHE_LOGBLOCKSZ, vdso_arch_data, icache_log_block_size);
+ OFFSET(CFG_DCACHE_LOGBLOCKSZ, vdso_arch_data, dcache_log_block_size);
+ OFFSET(CFG_SYSCALL_MAP64, vdso_arch_data, syscall_map_64);
+#endif
#ifdef CONFIG_BUG
DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 6fcae436ae51..b63b1f97a1b3 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -91,6 +91,7 @@ static struct clocksource clocksource_timebase = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
.read = timebase_read,
+ .vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER,
};
#define DECREMENTER_DEFAULT_MAX 0x7FFFFFFF
@@ -855,95 +856,6 @@ static notrace u64 timebase_read(struct clocksource *cs)
return (u64)get_tb();
}
-
-void update_vsyscall(struct timekeeper *tk)
-{
- struct timespec64 xt;
- struct clocksource *clock = tk->tkr_mono.clock;
- u32 mult = tk->tkr_mono.mult;
- u32 shift = tk->tkr_mono.shift;
- u64 cycle_last = tk->tkr_mono.cycle_last;
- u64 new_tb_to_xs, new_stamp_xsec;
- u64 frac_sec;
-
- if (clock != &clocksource_timebase)
- return;
-
- xt.tv_sec = tk->xtime_sec;
- xt.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
-
- /* Make userspace gettimeofday spin until we're done. */
- ++vdso_data->tb_update_count;
- smp_mb();
-
- /*
- * This computes ((2^20 / 1e9) * mult) >> shift as a
- * 0.64 fixed-point fraction.
- * The computation in the else clause below won't overflow
- * (as long as the timebase frequency is >= 1.049 MHz)
- * but loses precision because we lose the low bits of the constant
- * in the shift. Note that 19342813113834067 ~= 2^(20+64) / 1e9.
- * For a shift of 24 the error is about 0.5e-9, or about 0.5ns
- * over a second. (Shift values are usually 22, 23 or 24.)
- * For high frequency clocks such as the 512MHz timebase clock
- * on POWER[6789], the mult value is small (e.g. 32768000)
- * and so we can shift the constant by 16 initially
- * (295147905179 ~= 2^(20+64-16) / 1e9) and then do the
- * remaining shifts after the multiplication, which gives a
- * more accurate result (e.g. with mult = 32768000, shift = 24,
- * the error is only about 1.2e-12, or 0.7ns over 10 minutes).
- */
- if (mult <= 62500000 && clock->shift >= 16)
- new_tb_to_xs = ((u64) mult * 295147905179ULL) >> (clock->shift - 16);
- else
- new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift);
-
- /*
- * Compute the fractional second in units of 2^-32 seconds.
- * The fractional second is tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift
- * in nanoseconds, so multiplying that by 2^32 / 1e9 gives
- * it in units of 2^-32 seconds.
- * We assume shift <= 32 because clocks_calc_mult_shift()
- * generates shift values in the range 0 - 32.
- */
- frac_sec = tk->tkr_mono.xtime_nsec << (32 - shift);
- do_div(frac_sec, NSEC_PER_SEC);
-
- /*
- * Work out new stamp_xsec value for any legacy users of systemcfg.
- * stamp_xsec is in units of 2^-20 seconds.
- */
- new_stamp_xsec = frac_sec >> 12;
- new_stamp_xsec += tk->xtime_sec * XSEC_PER_SEC;
-
- /*
- * tb_update_count is used to allow the userspace gettimeofday code
- * to assure itself that it sees a consistent view of the tb_to_xs and
- * stamp_xsec variables. It reads the tb_update_count, then reads
- * tb_to_xs and stamp_xsec and then reads tb_update_count again. If
- * the two values of tb_update_count match and are even then the
- * tb_to_xs and stamp_xsec values are consistent. If not, then it
- * loops back and reads them again until this criteria is met.
- */
- vdso_data->tb_orig_stamp = cycle_last;
- vdso_data->stamp_xsec = new_stamp_xsec;
- vdso_data->tb_to_xs = new_tb_to_xs;
- vdso_data->wtom_clock_sec = tk->wall_to_monotonic.tv_sec;
- vdso_data->wtom_clock_nsec = tk->wall_to_monotonic.tv_nsec;
- vdso_data->stamp_xtime_sec = xt.tv_sec;
- vdso_data->stamp_xtime_nsec = xt.tv_nsec;
- vdso_data->stamp_sec_fraction = frac_sec;
- vdso_data->hrtimer_res = hrtimer_resolution;
- smp_wmb();
- ++(vdso_data->tb_update_count);
-}
-
-void update_vsyscall_tz(void)
-{
- vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
- vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-}
-
static void __init clocksource_init(void)
{
struct clocksource *clock;
@@ -1113,7 +1025,6 @@ void __init time_init(void)
sys_tz.tz_dsttime = 0;
}
- vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
/* initialise and enable the large decrementer (if we have one) */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 8dad44262e75..23208a051af5 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -17,6 +17,7 @@
#include <linux/elf.h>
#include <linux/security.h>
#include <linux/memblock.h>
+#include <vdso/datapage.h>
#include <asm/processor.h>
#include <asm/mmu.h>
@@ -70,10 +71,10 @@ static int vdso_ready;
* with it, it will become dynamically allocated
*/
static union {
- struct vdso_data data;
+ struct vdso_arch_data data;
u8 page[PAGE_SIZE];
} vdso_data_store __page_aligned_data;
-struct vdso_data *vdso_data = &vdso_data_store.data;
+struct vdso_arch_data *vdso_data = &vdso_data_store.data;
/* Format of the patch table */
struct vdso_patch_def
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 87ab1152d5ce..b922044236dd 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -2,7 +2,23 @@
# List of files in the vdso, has to be asm only for now
-obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o getcpu.o
+ARCH_REL_TYPE_ABS := R_PPC_JUMP_SLOT|R_PPC_GLOB_DAT|R_PPC_ADDR32|R_PPC_ADDR24|R_PPC_ADDR16|R_PPC_ADDR16_LO|R_PPC_ADDR16_HI|R_PPC_ADDR16_HA|R_PPC_ADDR14|R_PPC_ADDR14_BRTAKEN|R_PPC_ADDR14_BRNTAKEN
+include $(srctree)/lib/vdso/Makefile
+
+obj-vdso32 = sigtramp.o datapage.o cacheflush.o note.o getcpu.o $(obj-vdso32-y)
+obj-vdso32 += gettimeofday.o
+
+ifneq ($(c-gettimeofday-y),)
+ ifdef CONFIG_PPC64
+ CFLAGS_vgettimeofday.o += -include $(srctree)/$(src)/config-fake32.h
+ endif
+ CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
+ CFLAGS_vgettimeofday.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+ CFLAGS_vgettimeofday.o += $(call cc-option, -fno-stack-protector)
+ CFLAGS_vgettimeofday.o += -DDISABLE_BRANCH_PROFILING
+ CFLAGS_vgettimeofday.o += -ffreestanding -fasynchronous-unwind-tables
+ CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE)
+endif
# Build rules
@@ -15,6 +31,7 @@ endif
CC32FLAGS :=
ifdef CONFIG_PPC64
CC32FLAGS += -m32
+KBUILD_CFLAGS := $(filter-out -mcmodel=medium,$(KBUILD_CFLAGS))
endif
targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
@@ -23,6 +40,7 @@ obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
GCOV_PROFILE := n
KCOV_INSTRUMENT := n
UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
ccflags-y := -shared -fno-common -fno-builtin -nostdlib \
-Wl,-soname=linux-vdso32.so.1 -Wl,--hash-style=both
@@ -36,8 +54,8 @@ CPPFLAGS_vdso32.lds += -P -C -Upowerpc
$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE
- $(call if_changed,vdso32ld)
+$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) $(obj)/vgettimeofday.o FORCE
+ $(call if_changed,vdso32ld_and_check)
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
@@ -47,12 +65,16 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
# assembly rules for the .S files
$(obj-vdso32): %.o: %.S FORCE
$(call if_changed_dep,vdso32as)
+$(obj)/vgettimeofday.o: %.o: %.c FORCE
+ $(call if_changed_dep,vdso32cc)
# actual build commands
-quiet_cmd_vdso32ld = VDSO32L $@
- cmd_vdso32ld = $(VDSOCC) $(c_flags) $(CC32FLAGS) -o $@ $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn) -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
+quiet_cmd_vdso32ld_and_check = VDSO32L $@
+ cmd_vdso32ld_and_check = $(VDSOCC) $(c_flags) $(CC32FLAGS) -o $@ $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn) -Wl,-T$(filter %.lds,$^) $(filter %.o,$^) ; $(cmd_vdso_check)
quiet_cmd_vdso32as = VDSO32A $@
cmd_vdso32as = $(VDSOCC) $(a_flags) $(CC32FLAGS) -c -o $@ $<
+quiet_cmd_vdso32cc = VDSO32C $@
+ cmd_vdso32cc = $(VDSOCC) $(c_flags) $(CC32FLAGS) -c -o $@ $<
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
diff --git a/arch/powerpc/kernel/vdso32/config-fake32.h b/arch/powerpc/kernel/vdso32/config-fake32.h
new file mode 100644
index 000000000000..e16041fc15c9
--- /dev/null
+++ b/arch/powerpc/kernel/vdso32/config-fake32.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * In case of a 32 bit VDSO for a 64 bit kernel fake a 32 bit kernel
+ * configuration.
+ */
+
+#undef CONFIG_PPC64
+#undef CONFIG_64BIT
+#define CONFIG_PPC32
+#define CONFIG_32BIT 1
+#define CONFIG_GENERIC_ATOMIC64 1
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#undef CONFIG_PPC_BOOK3S_64
+#undef CONFIG_PPC_PSERIES
+#define CONFIG_PPC_BOOK3S_32
+#else
+#define CONFIG_PPC_MMU_NOHASH_32
+#define CONFIG_FSL_BOOKE
+#endif
+
+#define CONFIG_TASK_SIZE 0
+#undef CONFIG_MMIOWB
+#undef CONFIG_PPC_SPLPAR
+#undef CONFIG_SPARSEMEM
+#undef CONFIG_PGTABLE_LEVELS
+#define CONFIG_PGTABLE_LEVELS 2
+#undef CONFIG_TRANSPARENT_HUGEPAGE
+#undef CONFIG_SPARSEMEM_VMEMMAP
+#undef CONFIG_FLATMEM
+#define CONFIG_FLATMEM
+#undef CONFIG_PPC_INDIRECT_MMIO
+#undef CONFIG_PPC_INDIRECT_PIO
+#undef CONFIG_EEH
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index e7f8f9f1b3f4..fd7b01c51281 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -12,13 +12,7 @@
#include <asm/vdso_datapage.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
-
-/* Offset for the low 32-bit part of a field of long type */
-#ifdef CONFIG_PPC64
-#define LOPART 4
-#else
-#define LOPART 0
-#endif
+#include <asm/vdso/gettimeofday.h>
.text
/*
@@ -28,32 +22,7 @@
*
*/
V_FUNCTION_BEGIN(__kernel_gettimeofday)
- .cfi_startproc
- mflr r12
- .cfi_register lr,r12
-
- mr. r10,r3 /* r10 saves tv */
- mr r11,r4 /* r11 saves tz */
- get_datapage r9, r0
- beq 3f
- LOAD_REG_IMMEDIATE(r7, 1000000) /* load up USEC_PER_SEC */
- bl __do_get_tspec@local /* get sec/usec from tb & kernel */
- stw r3,TVAL32_TV_SEC(r10)
- stw r4,TVAL32_TV_USEC(r10)
-
-3: cmplwi r11,0 /* check if tz is NULL */
- mtlr r12
- crclr cr0*4+so
- li r3,0
- beqlr
-
- lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
- lwz r5,CFG_TZ_DSTTIME(r9)
- stw r4,TZONE_TZ_MINWEST(r11)
- stw r5,TZONE_TZ_DSTTIME(r11)
-
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_gettimeofday
V_FUNCTION_END(__kernel_gettimeofday)
/*
@@ -63,127 +32,7 @@ V_FUNCTION_END(__kernel_gettimeofday)
*
*/
V_FUNCTION_BEGIN(__kernel_clock_gettime)
- .cfi_startproc
- /* Check for supported clock IDs */
- cmpli cr0,r3,CLOCK_REALTIME
- cmpli cr1,r3,CLOCK_MONOTONIC
- cror cr0*4+eq,cr0*4+eq,cr1*4+eq
-
- cmpli cr5,r3,CLOCK_REALTIME_COARSE
- cmpli cr6,r3,CLOCK_MONOTONIC_COARSE
- cror cr5*4+eq,cr5*4+eq,cr6*4+eq
-
- cror cr0*4+eq,cr0*4+eq,cr5*4+eq
- bne cr0, .Lgettime_fallback
-
- mflr r12 /* r12 saves lr */
- .cfi_register lr,r12
- mr r11,r4 /* r11 saves tp */
- get_datapage r9, r0
- LOAD_REG_IMMEDIATE(r7, NSEC_PER_SEC) /* load up NSEC_PER_SEC */
- beq cr5, .Lcoarse_clocks
-.Lprecise_clocks:
- bl __do_get_tspec@local /* get sec/nsec from tb & kernel */
- bne cr1, .Lfinish /* not monotonic -> all done */
-
- /*
- * CLOCK_MONOTONIC
- */
-
- /* now we must fixup using wall to monotonic. We need to snapshot
- * that value and do the counter trick again. Fortunately, we still
- * have the counter value in r8 that was returned by __do_get_xsec.
- * At this point, r3,r4 contain our sec/nsec values, r5 and r6
- * can be used, r7 contains NSEC_PER_SEC.
- */
-
- lwz r5,(WTOM_CLOCK_SEC+LOPART)(r9)
- lwz r6,WTOM_CLOCK_NSEC(r9)
-
- /* We now have our offset in r5,r6. We create a fake dependency
- * on that value and re-check the counter
- */
- or r0,r6,r5
- xor r0,r0,r0
- add r9,r9,r0
- lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
- cmpl cr0,r8,r0 /* check if updated */
- bne- .Lprecise_clocks
- b .Lfinish_monotonic
-
- /*
- * For coarse clocks we get data directly from the vdso data page, so
- * we don't need to call __do_get_tspec, but we still need to do the
- * counter trick.
- */
-.Lcoarse_clocks:
- lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
- andi. r0,r8,1 /* pending update ? loop */
- bne- .Lcoarse_clocks
- add r9,r9,r0 /* r0 is already 0 */
-
- /*
- * CLOCK_REALTIME_COARSE, below values are needed for MONOTONIC_COARSE
- * too
- */
- lwz r3,STAMP_XTIME_SEC+LOPART(r9)
- lwz r4,STAMP_XTIME_NSEC+LOPART(r9)
- bne cr6,1f
-
- /* CLOCK_MONOTONIC_COARSE */
- lwz r5,(WTOM_CLOCK_SEC+LOPART)(r9)
- lwz r6,WTOM_CLOCK_NSEC(r9)
-
- /* check if counter has updated */
- or r0,r6,r5
-1: or r0,r0,r3
- or r0,r0,r4
- xor r0,r0,r0
- add r3,r3,r0
- lwz r0,CFG_TB_UPDATE_COUNT+LOPART(r9)
- cmpl cr0,r0,r8 /* check if updated */
- bne- .Lcoarse_clocks
-
- /* Counter has not updated, so continue calculating proper values for
- * sec and nsec if monotonic coarse, or just return with the proper
- * values for realtime.
- */
- bne cr6, .Lfinish
-
- /* Calculate and store result. Note that this mimics the C code,
- * which may cause funny results if nsec goes negative... is that
- * possible at all ?
- */
-.Lfinish_monotonic:
- add r3,r3,r5
- add r4,r4,r6
- cmpw cr0,r4,r7
- cmpwi cr1,r4,0
- blt 1f
- subf r4,r7,r4
- addi r3,r3,1
-1: bge cr1, .Lfinish
- addi r3,r3,-1
- add r4,r4,r7
-
-.Lfinish:
- stw r3,TSPC32_TV_SEC(r11)
- stw r4,TSPC32_TV_NSEC(r11)
-
- mtlr r12
- crclr cr0*4+so
- li r3,0
- blr
-
- /*
- * syscall fallback
- */
-.Lgettime_fallback:
- li r0,__NR_clock_gettime
- .cfi_restore lr
- sc
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_clock_gettime
V_FUNCTION_END(__kernel_clock_gettime)
@@ -194,37 +43,7 @@ V_FUNCTION_END(__kernel_clock_gettime)
*
*/
V_FUNCTION_BEGIN(__kernel_clock_getres)
- .cfi_startproc
- /* Check for supported clock IDs */
- cmplwi cr0, r3, CLOCK_MAX
- cmpwi cr1, r3, CLOCK_REALTIME_COARSE
- cmpwi cr7, r3, CLOCK_MONOTONIC_COARSE
- bgt cr0, 99f
- LOAD_REG_IMMEDIATE(r5, KTIME_LOW_RES)
- beq cr1, 1f
- beq cr7, 1f
-
- mflr r12
- .cfi_register lr,r12
- get_datapage r3, r0
- lwz r5, CLOCK_HRTIMER_RES(r3)
- mtlr r12
-1: li r3,0
- cmpli cr0,r4,0
- crclr cr0*4+so
- beqlr
- stw r3,TSPC32_TV_SEC(r4)
- stw r5,TSPC32_TV_NSEC(r4)
- blr
-
- /*
- * syscall fallback
- */
-99:
- li r0,__NR_clock_getres
- sc
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_clock_getres
V_FUNCTION_END(__kernel_clock_getres)
@@ -235,105 +54,5 @@ V_FUNCTION_END(__kernel_clock_getres)
*
*/
V_FUNCTION_BEGIN(__kernel_time)
- .cfi_startproc
- mflr r12
- .cfi_register lr,r12
-
- mr r11,r3 /* r11 holds t */
- get_datapage r9, r0
-
- lwz r3,STAMP_XTIME_SEC+LOPART(r9)
-
- cmplwi r11,0 /* check if t is NULL */
- mtlr r12
- crclr cr0*4+so
- beqlr
- stw r3,0(r11) /* store result at *t */
- blr
- .cfi_endproc
+ cvdso_call_time __c_kernel_time
V_FUNCTION_END(__kernel_time)
-
-/*
- * This is the core of clock_gettime() and gettimeofday(),
- * it returns the current time in r3 (seconds) and r4.
- * On entry, r7 gives the resolution of r4, either USEC_PER_SEC
- * or NSEC_PER_SEC, giving r4 in microseconds or nanoseconds.
- * It expects the datapage ptr in r9 and doesn't clobber it.
- * It clobbers r0, r5 and r6.
- * On return, r8 contains the counter value that can be reused.
- * This clobbers cr0 but not any other cr field.
- */
-__do_get_tspec:
- .cfi_startproc
- /* Check for update count & load values. We use the low
- * order 32 bits of the update count
- */
-1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
- andi. r0,r8,1 /* pending update ? loop */
- bne- 1b
- xor r0,r8,r8 /* create dependency */
- add r9,r9,r0
-
- /* Load orig stamp (offset to TB) */
- lwz r5,CFG_TB_ORIG_STAMP(r9)
- lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
-
- /* Get a stable TB value */
-2: MFTBU(r3)
- MFTBL(r4)
- MFTBU(r0)
- cmplw cr0,r3,r0
- bne- 2b
-
- /* Subtract tb orig stamp and shift left 12 bits.
- */
- subfc r4,r6,r4
- subfe r0,r5,r3
- slwi r0,r0,12
- rlwimi. r0,r4,12,20,31
- slwi r4,r4,12
-
- /*
- * Load scale factor & do multiplication.
- * We only use the high 32 bits of the tb_to_xs value.
- * Even with a 1GHz timebase clock, the high 32 bits of
- * tb_to_xs will be at least 4 million, so the error from
- * ignoring the low 32 bits will be no more than 0.25ppm.
- * The error will just make the clock run very very slightly
- * slow until the next time the kernel updates the VDSO data,
- * at which point the clock will catch up to the kernel's value,
- * so there is no long-term error accumulation.
- */
- lwz r5,CFG_TB_TO_XS(r9) /* load values */
- mulhwu r4,r4,r5
- li r3,0
-
- beq+ 4f /* skip high part computation if 0 */
- mulhwu r3,r0,r5
- mullw r5,r0,r5
- addc r4,r4,r5
- addze r3,r3
-4:
- /* At this point, we have seconds since the xtime stamp
- * as a 32.32 fixed-point number in r3 and r4.
- * Load & add the xtime stamp.
- */
- lwz r5,STAMP_XTIME_SEC+LOPART(r9)
- lwz r6,STAMP_SEC_FRAC(r9)
- addc r4,r4,r6
- adde r3,r3,r5
-
- /* We create a fake dependency on the result in r3/r4
- * and re-check the counter
- */
- or r6,r4,r3
- xor r0,r6,r6
- add r9,r9,r0
- lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
- cmplw cr0,r8,r0 /* check if updated */
- bne- 1b
-
- mulhwu r4,r4,r7 /* convert to micro or nanoseconds */
-
- blr
- .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index 38c317f25141..7890d889f9c5 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -1,8 +1,20 @@
# SPDX-License-Identifier: GPL-2.0
# List of files in the vdso, has to be asm only for now
+ARCH_REL_TYPE_ABS := R_PPC_JUMP_SLOT|R_PPC_GLOB_DAT|R_PPC_ADDR32|R_PPC_ADDR24|R_PPC_ADDR16|R_PPC_ADDR16_LO|R_PPC_ADDR16_HI|R_PPC_ADDR16_HA|R_PPC_ADDR14|R_PPC_ADDR14_BRTAKEN|R_PPC_ADDR14_BRNTAKEN
+include $(srctree)/lib/vdso/Makefile
+
obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o getcpu.o
+ifneq ($(c-gettimeofday-y),)
+ CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
+ CFLAGS_vgettimeofday.o += $(DISABLE_LATENT_ENTROPY_PLUGIN)
+ CFLAGS_vgettimeofday.o += $(call cc-option, -fno-stack-protector)
+ CFLAGS_vgettimeofday.o += -DDISABLE_BRANCH_PROFILING
+ CFLAGS_vgettimeofday.o += -ffreestanding -fasynchronous-unwind-tables
+ CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE)
+endif
+
# Build rules
targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
@@ -11,6 +23,7 @@ obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
GCOV_PROFILE := n
KCOV_INSTRUMENT := n
UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
ccflags-y := -shared -fno-common -fno-builtin -nostdlib \
-Wl,-soname=linux-vdso64.so.1 -Wl,--hash-style=both
@@ -20,12 +33,14 @@ obj-y += vdso64_wrapper.o
extra-y += vdso64.lds
CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
+$(obj)/vgettimeofday.o: %.o: %.c FORCE
+
# Force dependency (incbin is bad)
$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
# link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE
- $(call if_changed,vdso64ld)
+$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) $(obj)/vgettimeofday.o FORCE
+ $(call if_changed,vdso64ld_and_check)
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
@@ -33,8 +48,8 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
# actual build commands
-quiet_cmd_vdso64ld = VDSO64L $@
- cmd_vdso64ld = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^) $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn)
+quiet_cmd_vdso64ld_and_check = VDSO64L $@
+ cmd_vdso64ld_and_check = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^) $(call cc-ldoption, -Wl$(comma)--orphan-handling=warn); $(cmd_vdso_check)
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index 20f8be40c653..d7a7bfb51081 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -12,6 +12,7 @@
#include <asm/vdso_datapage.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
+#include <asm/vdso/gettimeofday.h>
.text
/*
@@ -21,31 +22,7 @@
*
*/
V_FUNCTION_BEGIN(__kernel_gettimeofday)
- .cfi_startproc
- mflr r12
- .cfi_register lr,r12
-
- mr r11,r3 /* r11 holds tv */
- mr r10,r4 /* r10 holds tz */
- get_datapage r3, r0
- cmpldi r11,0 /* check if tv is NULL */
- beq 2f
- lis r7,1000000@ha /* load up USEC_PER_SEC */
- addi r7,r7,1000000@l
- bl V_LOCAL_FUNC(__do_get_tspec) /* get sec/us from tb & kernel */
- std r4,TVAL64_TV_SEC(r11) /* store sec in tv */
- std r5,TVAL64_TV_USEC(r11) /* store usec in tv */
-2: cmpldi r10,0 /* check if tz is NULL */
- beq 1f
- lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */
- lwz r5,CFG_TZ_DSTTIME(r3)
- stw r4,TZONE_TZ_MINWEST(r10)
- stw r5,TZONE_TZ_DSTTIME(r10)
-1: mtlr r12
- crclr cr0*4+so
- li r3,0 /* always success */
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_gettimeofday
V_FUNCTION_END(__kernel_gettimeofday)
@@ -56,120 +33,7 @@ V_FUNCTION_END(__kernel_gettimeofday)
*
*/
V_FUNCTION_BEGIN(__kernel_clock_gettime)
- .cfi_startproc
- /* Check for supported clock IDs */
- cmpwi cr0,r3,CLOCK_REALTIME
- cmpwi cr1,r3,CLOCK_MONOTONIC
- cror cr0*4+eq,cr0*4+eq,cr1*4+eq
-
- cmpwi cr5,r3,CLOCK_REALTIME_COARSE
- cmpwi cr6,r3,CLOCK_MONOTONIC_COARSE
- cror cr5*4+eq,cr5*4+eq,cr6*4+eq
-
- cror cr0*4+eq,cr0*4+eq,cr5*4+eq
- bne cr0,99f
-
- mflr r12 /* r12 saves lr */
- .cfi_register lr,r12
- mr r11,r4 /* r11 saves tp */
- get_datapage r3, r0
- lis r7,NSEC_PER_SEC@h /* want nanoseconds */
- ori r7,r7,NSEC_PER_SEC@l
- beq cr5,70f
-50: bl V_LOCAL_FUNC(__do_get_tspec) /* get time from tb & kernel */
- bne cr1,80f /* if not monotonic, all done */
-
- /*
- * CLOCK_MONOTONIC
- */
-
- /* now we must fixup using wall to monotonic. We need to snapshot
- * that value and do the counter trick again. Fortunately, we still
- * have the counter value in r8 that was returned by __do_get_tspec.
- * At this point, r4,r5 contain our sec/nsec values.
- */
-
- ld r6,WTOM_CLOCK_SEC(r3)
- lwa r9,WTOM_CLOCK_NSEC(r3)
-
- /* We now have our result in r6,r9. We create a fake dependency
- * on that result and re-check the counter
- */
- or r0,r6,r9
- xor r0,r0,r0
- add r3,r3,r0
- ld r0,CFG_TB_UPDATE_COUNT(r3)
- cmpld cr0,r0,r8 /* check if updated */
- bne- 50b
- b 78f
-
- /*
- * For coarse clocks we get data directly from the vdso data page, so
- * we don't need to call __do_get_tspec, but we still need to do the
- * counter trick.
- */
-70: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r8,1 /* pending update ? loop */
- bne- 70b
- add r3,r3,r0 /* r0 is already 0 */
-
- /*
- * CLOCK_REALTIME_COARSE, below values are needed for MONOTONIC_COARSE
- * too
- */
- ld r4,STAMP_XTIME_SEC(r3)
- ld r5,STAMP_XTIME_NSEC(r3)
- bne cr6,75f
-
- /* CLOCK_MONOTONIC_COARSE */
- ld r6,WTOM_CLOCK_SEC(r3)
- lwa r9,WTOM_CLOCK_NSEC(r3)
-
- /* check if counter has updated */
- or r0,r6,r9
-75: or r0,r0,r4
- or r0,r0,r5
- xor r0,r0,r0
- add r3,r3,r0
- ld r0,CFG_TB_UPDATE_COUNT(r3)
- cmpld cr0,r0,r8 /* check if updated */
- bne- 70b
-
- /* Counter has not updated, so continue calculating proper values for
- * sec and nsec if monotonic coarse, or just return with the proper
- * values for realtime.
- */
- bne cr6,80f
-
- /* Add wall->monotonic offset and check for overflow or underflow */
-78: add r4,r4,r6
- add r5,r5,r9
- cmpd cr0,r5,r7
- cmpdi cr1,r5,0
- blt 79f
- subf r5,r7,r5
- addi r4,r4,1
-79: bge cr1,80f
- addi r4,r4,-1
- add r5,r5,r7
-
-80: std r4,TSPC64_TV_SEC(r11)
- std r5,TSPC64_TV_NSEC(r11)
-
- mtlr r12
- crclr cr0*4+so
- li r3,0
- blr
-
- /*
- * syscall fallback
- */
-99:
- li r0,__NR_clock_gettime
- .cfi_restore lr
- sc
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_clock_gettime
V_FUNCTION_END(__kernel_clock_gettime)
@@ -180,34 +44,7 @@ V_FUNCTION_END(__kernel_clock_gettime)
*
*/
V_FUNCTION_BEGIN(__kernel_clock_getres)
- .cfi_startproc
- /* Check for supported clock IDs */
- cmpwi cr0,r3,CLOCK_REALTIME
- cmpwi cr1,r3,CLOCK_MONOTONIC
- cror cr0*4+eq,cr0*4+eq,cr1*4+eq
- bne cr0,99f
-
- mflr r12
- .cfi_register lr,r12
- get_datapage r3, r0
- lwz r5, CLOCK_HRTIMER_RES(r3)
- mtlr r12
- li r3,0
- cmpldi cr0,r4,0
- crclr cr0*4+so
- beqlr
- std r3,TSPC64_TV_SEC(r4)
- std r5,TSPC64_TV_NSEC(r4)
- blr
-
- /*
- * syscall fallback
- */
-99:
- li r0,__NR_clock_getres
- sc
- blr
- .cfi_endproc
+ cvdso_call __c_kernel_clock_getres
V_FUNCTION_END(__kernel_clock_getres)
/*
@@ -217,74 +54,5 @@ V_FUNCTION_END(__kernel_clock_getres)
*
*/
V_FUNCTION_BEGIN(__kernel_time)
- .cfi_startproc
- mflr r12
- .cfi_register lr,r12
-
- mr r11,r3 /* r11 holds t */
- get_datapage r3, r0
-
- ld r4,STAMP_XTIME_SEC(r3)
-
- cmpldi r11,0 /* check if t is NULL */
- beq 2f
- std r4,0(r11) /* store result at *t */
-2: mtlr r12
- crclr cr0*4+so
- mr r3,r4
- blr
- .cfi_endproc
+ cvdso_call_time __c_kernel_time
V_FUNCTION_END(__kernel_time)
-
-
-/*
- * This is the core of clock_gettime() and gettimeofday(),
- * it returns the current time in r4 (seconds) and r5.
- * On entry, r7 gives the resolution of r5, either USEC_PER_SEC
- * or NSEC_PER_SEC, giving r5 in microseconds or nanoseconds.
- * It expects the datapage ptr in r3 and doesn't clobber it.
- * It clobbers r0, r6 and r9.
- * On return, r8 contains the counter value that can be reused.
- * This clobbers cr0 but not any other cr field.
- */
-V_FUNCTION_BEGIN(__do_get_tspec)
- .cfi_startproc
- /* check for update count & load values */
-1: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r8,1 /* pending update ? loop */
- bne- 1b
- xor r0,r8,r8 /* create dependency */
- add r3,r3,r0
-
- /* Get TB & offset it. We use the MFTB macro which will generate
- * workaround code for Cell.
- */
- MFTB(r6)
- ld r9,CFG_TB_ORIG_STAMP(r3)
- subf r6,r9,r6
-
- /* Scale result */
- ld r5,CFG_TB_TO_XS(r3)
- sldi r6,r6,12 /* compute time since stamp_xtime */
- mulhdu r6,r6,r5 /* in units of 2^-32 seconds */
-
- /* Add stamp since epoch */
- ld r4,STAMP_XTIME_SEC(r3)
- lwz r5,STAMP_SEC_FRAC(r3)
- or r0,r4,r5
- or r0,r0,r6
- xor r0,r0,r0
- add r3,r3,r0
- ld r0,CFG_TB_UPDATE_COUNT(r3)
- cmpld r0,r8 /* check if updated */
- bne- 1b /* reload if so */
-
- /* convert to seconds & nanoseconds and add to stamp */
- add r6,r6,r5 /* add on fractional seconds of xtime */
- mulhwu r5,r6,r7 /* compute micro or nanoseconds and */
- srdi r6,r6,32 /* seconds since stamp_xtime */
- clrldi r5,r5,32
- add r4,r4,r6
- blr
- .cfi_endproc
-V_FUNCTION_END(__do_get_tspec)
--
2.25.0
^ permalink raw reply related
* [PATCH v10 2/5] powerpc/vdso: Prepare for switching VDSO to generic C implementation.
From: Christophe Leroy @ 2020-08-05 7:09 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, nathanl,
anton
Cc: linux-arch, arnd, linux-kernel, luto, tglx, vincenzo.frascino,
linuxppc-dev
In-Reply-To: <cover.1596611196.git.christophe.leroy@csgroup.eu>
Prepare for switching VDSO to generic C implementation in following
patch. Here, we:
- Prepare the helpers to call the C VDSO functions
- Prepare the required callbacks for the C VDSO functions
- Prepare the clocksource.h files to define VDSO_ARCH_CLOCKMODES
- Add the C trampolines to the generic C VDSO functions
powerpc is a bit special for VDSO as well as system calls in the
way that it requires setting CR SO bit which cannot be done in C.
Therefore, entry/exit needs to be performed in ASM.
Implementing __arch_get_vdso_data() would clobber the link register,
requiring the caller to save it. As the ASM calling function already
has to set a stack frame and saves the link register before calling
the C vdso function, retriving the vdso data pointer there is lighter.
Implement __arch_vdso_capable() and:
- When the timebase is used, make it always return true.
- When the RTC clock is used, make it always return false.
Provide vdso_shift_ns(), as the generic x >> s gives the following
bad result:
18: 35 25 ff e0 addic. r9,r5,-32
1c: 41 80 00 10 blt 2c <shift+0x14>
20: 7c 64 4c 30 srw r4,r3,r9
24: 38 60 00 00 li r3,0
...
2c: 54 69 08 3c rlwinm r9,r3,1,0,30
30: 21 45 00 1f subfic r10,r5,31
34: 7c 84 2c 30 srw r4,r4,r5
38: 7d 29 50 30 slw r9,r9,r10
3c: 7c 63 2c 30 srw r3,r3,r5
40: 7d 24 23 78 or r4,r9,r4
In our case the shift is always <= 32. In addition, the upper 32 bits
of the result are likely nul. Lets GCC know it, it also optimises the
following calculations.
With the patch, we get:
0: 21 25 00 20 subfic r9,r5,32
4: 7c 69 48 30 slw r9,r3,r9
8: 7c 84 2c 30 srw r4,r4,r5
c: 7d 24 23 78 or r4,r9,r4
10: 7c 63 2c 30 srw r3,r3,r5
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v10:
- Added a comment to explain the reason for the two stack frames.
- Moved back the .cfi_register next to mflr
v9:
- No more modification of __get_datapage(). Offset is added after.
- Adding a second stack frame because the PPC VDSO ABI doesn't force
the caller to set one.
v8:
- New, splitted out of last patch of the series
---
arch/powerpc/include/asm/clocksource.h | 7 +
arch/powerpc/include/asm/vdso/clocksource.h | 7 +
arch/powerpc/include/asm/vdso/gettimeofday.h | 185 +++++++++++++++++++
arch/powerpc/kernel/vdso32/vgettimeofday.c | 29 +++
arch/powerpc/kernel/vdso64/vgettimeofday.c | 29 +++
5 files changed, 257 insertions(+)
create mode 100644 arch/powerpc/include/asm/clocksource.h
create mode 100644 arch/powerpc/include/asm/vdso/clocksource.h
create mode 100644 arch/powerpc/include/asm/vdso/gettimeofday.h
create mode 100644 arch/powerpc/kernel/vdso32/vgettimeofday.c
create mode 100644 arch/powerpc/kernel/vdso64/vgettimeofday.c
diff --git a/arch/powerpc/include/asm/clocksource.h b/arch/powerpc/include/asm/clocksource.h
new file mode 100644
index 000000000000..482185566b0c
--- /dev/null
+++ b/arch/powerpc/include/asm/clocksource.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_CLOCKSOURCE_H
+#define _ASM_CLOCKSOURCE_H
+
+#include <asm/vdso/clocksource.h>
+
+#endif
diff --git a/arch/powerpc/include/asm/vdso/clocksource.h b/arch/powerpc/include/asm/vdso/clocksource.h
new file mode 100644
index 000000000000..ec5d672d2569
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso/clocksource.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSOCLOCKSOURCE_H
+#define __ASM_VDSOCLOCKSOURCE_H
+
+#define VDSO_ARCH_CLOCKMODES VDSO_CLOCKMODE_ARCHTIMER
+
+#endif
diff --git a/arch/powerpc/include/asm/vdso/gettimeofday.h b/arch/powerpc/include/asm/vdso/gettimeofday.h
new file mode 100644
index 000000000000..e2c462796a22
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso/gettimeofday.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSO_GETTIMEOFDAY_H
+#define __ASM_VDSO_GETTIMEOFDAY_H
+
+#include <asm/ptrace.h>
+
+#ifdef __ASSEMBLY__
+
+/*
+ * The macros sets two stack frames, one for the caller and one for the callee
+ * because there are no requirement for the caller to set a stack frame when
+ * calling VDSO so it may have omitted to set one, especially on PPC64
+ */
+
+.macro cvdso_call funct
+ .cfi_startproc
+ PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
+ mflr r0
+ .cfi_register lr, r0
+ PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
+ PPC_STL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+ get_datapage r5, r0
+ addi r5, r5, VDSO_DATA_OFFSET
+ bl \funct
+ PPC_LL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+ cmpwi r3, 0
+ mtlr r0
+ .cfi_restore lr
+ addi r1, r1, 2 * STACK_FRAME_OVERHEAD
+ crclr so
+ beqlr+
+ crset so
+ neg r3, r3
+ blr
+ .cfi_endproc
+.endm
+
+.macro cvdso_call_time funct
+ .cfi_startproc
+ PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
+ mflr r0
+ .cfi_register lr, r0
+ PPC_STLU r1, -STACK_FRAME_OVERHEAD(r1)
+ PPC_STL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+ get_datapage r4, r0
+ addi r4, r4, VDSO_DATA_OFFSET
+ bl \funct
+ PPC_LL r0, STACK_FRAME_OVERHEAD + PPC_LR_STKOFF(r1)
+ crclr so
+ mtlr r0
+ .cfi_restore lr
+ addi r1, r1, 2 * STACK_FRAME_OVERHEAD
+ blr
+ .cfi_endproc
+.endm
+
+#else
+
+#include <asm/time.h>
+#include <asm/unistd.h>
+#include <uapi/linux/time.h>
+
+#define VDSO_HAS_CLOCK_GETRES 1
+
+#define VDSO_HAS_TIME 1
+
+static __always_inline int do_syscall_2(const unsigned long _r0, const unsigned long _r3,
+ const unsigned long _r4)
+{
+ register long r0 asm("r0") = _r0;
+ register unsigned long r3 asm("r3") = _r3;
+ register unsigned long r4 asm("r4") = _r4;
+ register int ret asm ("r3");
+
+ asm volatile(
+ " sc\n"
+ " bns+ 1f\n"
+ " neg %0, %0\n"
+ "1:\n"
+ : "=r" (ret), "+r" (r4), "+r" (r0)
+ : "r" (r3)
+ : "memory", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "cr0", "ctr");
+
+ return ret;
+}
+
+static __always_inline
+int gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz)
+{
+ return do_syscall_2(__NR_gettimeofday, (unsigned long)_tv, (unsigned long)_tz);
+}
+
+static __always_inline
+int clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+ return do_syscall_2(__NR_clock_gettime, _clkid, (unsigned long)_ts);
+}
+
+static __always_inline
+int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+ return do_syscall_2(__NR_clock_getres, _clkid, (unsigned long)_ts);
+}
+
+#ifdef CONFIG_VDSO32
+
+#define BUILD_VDSO32 1
+
+static __always_inline
+int clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+ return do_syscall_2(__NR_clock_gettime, _clkid, (unsigned long)_ts);
+}
+
+static __always_inline
+int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+ return do_syscall_2(__NR_clock_getres, _clkid, (unsigned long)_ts);
+}
+#endif
+
+static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
+{
+ return get_tb();
+}
+
+const struct vdso_data *__arch_get_vdso_data(void);
+
+static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
+{
+ return !__USE_RTC();
+}
+#define vdso_clocksource_ok vdso_clocksource_ok
+
+/*
+ * powerpc specific delta calculation.
+ *
+ * This variant removes the masking of the subtraction because the
+ * clocksource mask of all VDSO capable clocksources on powerpc is U64_MAX
+ * which would result in a pointless operation. The compiler cannot
+ * optimize it away as the mask comes from the vdso data and is not compile
+ * time constant.
+ */
+static __always_inline u64 vdso_calc_delta(u64 cycles, u64 last, u64 mask, u32 mult)
+{
+ return (cycles - last) * mult;
+}
+#define vdso_calc_delta vdso_calc_delta
+
+#ifndef __powerpc64__
+static __always_inline u64 vdso_shift_ns(u64 ns, unsigned long shift)
+{
+ u32 hi = ns >> 32;
+ u32 lo = ns;
+
+ lo >>= shift;
+ lo |= hi << (32 - shift);
+ hi >>= shift;
+
+ if (likely(hi == 0))
+ return lo;
+
+ return ((u64)hi << 32) | lo;
+}
+#define vdso_shift_ns vdso_shift_ns
+#endif
+
+#ifdef __powerpc64__
+int __c_kernel_clock_gettime(clockid_t clock, struct __kernel_timespec *ts,
+ const struct vdso_data *vd);
+int __c_kernel_clock_getres(clockid_t clock_id, struct __kernel_timespec *res,
+ const struct vdso_data *vd);
+#else
+int __c_kernel_clock_gettime(clockid_t clock, struct old_timespec32 *ts,
+ const struct vdso_data *vd);
+int __c_kernel_clock_getres(clockid_t clock_id, struct old_timespec32 *res,
+ const struct vdso_data *vd);
+#endif
+int __c_kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz,
+ const struct vdso_data *vd);
+__kernel_old_time_t __c_kernel_time(__kernel_old_time_t *time,
+ const struct vdso_data *vd);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/powerpc/kernel/vdso32/vgettimeofday.c b/arch/powerpc/kernel/vdso32/vgettimeofday.c
new file mode 100644
index 000000000000..0b9ab4c22ef2
--- /dev/null
+++ b/arch/powerpc/kernel/vdso32/vgettimeofday.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Powerpc userspace implementations of gettimeofday() and similar.
+ */
+#include <linux/time.h>
+#include <linux/types.h>
+
+int __c_kernel_clock_gettime(clockid_t clock, struct old_timespec32 *ts,
+ const struct vdso_data *vd)
+{
+ return __cvdso_clock_gettime32_data(vd, clock, ts);
+}
+
+int __c_kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz,
+ const struct vdso_data *vd)
+{
+ return __cvdso_gettimeofday_data(vd, tv, tz);
+}
+
+int __c_kernel_clock_getres(clockid_t clock_id, struct old_timespec32 *res,
+ const struct vdso_data *vd)
+{
+ return __cvdso_clock_getres_time32_data(vd, clock_id, res);
+}
+
+__kernel_old_time_t __c_kernel_time(__kernel_old_time_t *time, const struct vdso_data *vd)
+{
+ return __cvdso_time_data(vd, time);
+}
diff --git a/arch/powerpc/kernel/vdso64/vgettimeofday.c b/arch/powerpc/kernel/vdso64/vgettimeofday.c
new file mode 100644
index 000000000000..5b5500058344
--- /dev/null
+++ b/arch/powerpc/kernel/vdso64/vgettimeofday.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Powerpc userspace implementations of gettimeofday() and similar.
+ */
+#include <linux/time.h>
+#include <linux/types.h>
+
+int __c_kernel_clock_gettime(clockid_t clock, struct __kernel_timespec *ts,
+ const struct vdso_data *vd)
+{
+ return __cvdso_clock_gettime_data(vd, clock, ts);
+}
+
+int __c_kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz,
+ const struct vdso_data *vd)
+{
+ return __cvdso_gettimeofday_data(vd, tv, tz);
+}
+
+int __c_kernel_clock_getres(clockid_t clock_id, struct __kernel_timespec *res,
+ const struct vdso_data *vd)
+{
+ return __cvdso_clock_getres_data(vd, clock_id, res);
+}
+
+__kernel_old_time_t __c_kernel_time(__kernel_old_time_t *time, const struct vdso_data *vd)
+{
+ return __cvdso_time_data(vd, time);
+}
--
2.25.0
^ permalink raw reply related
* Re: [PATCH v2 15/17] memblock: remove unused memblock_mem_size()
From: Baoquan He @ 2020-08-05 8:29 UTC (permalink / raw)
To: Mike Rapoport
Cc: Emil Renner Berthing, linux-sh, Peter Zijlstra, Dave Hansen,
linux-mips, Max Filippov, Paul Mackerras, sparclinux, linux-riscv,
Will Deacon, Stafford Horne, Marek Szyprowski, linux-arch,
linux-s390, linux-c6x-dev, Yoshinori Sato, x86, Russell King,
Mike Rapoport, clang-built-linux, Ingo Molnar, linux-arm-kernel,
Catalin Marinas, uclinux-h8-devel, linux-xtensa, openrisc,
Borislav Petkov, Andy Lutomirski, Paul Walmsley, Thomas Gleixner,
Hari Bathini, Michal Simek, linux-mm, linuxppc-dev, linux-kernel,
iommu, Palmer Dabbelt, Andrew Morton, Christoph Hellwig
In-Reply-To: <20200802163601.8189-16-rppt@kernel.org>
On 08/02/20 at 07:35pm, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> The only user of memblock_mem_size() was x86 setup code, it is gone now and
> memblock_mem_size() funciton can be removed.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> include/linux/memblock.h | 1 -
> mm/memblock.c | 15 ---------------
> 2 files changed, 16 deletions(-)
>
> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> index d70c2835e913..ec2fd8f32a19 100644
> --- a/include/linux/memblock.h
> +++ b/include/linux/memblock.h
> @@ -450,7 +450,6 @@ static inline bool memblock_bottom_up(void)
>
> phys_addr_t memblock_phys_mem_size(void);
> phys_addr_t memblock_reserved_size(void);
> -phys_addr_t memblock_mem_size(unsigned long limit_pfn);
> phys_addr_t memblock_start_of_DRAM(void);
> phys_addr_t memblock_end_of_DRAM(void);
> void memblock_enforce_memory_limit(phys_addr_t memory_limit);
> diff --git a/mm/memblock.c b/mm/memblock.c
> index c1a4c8798973..48d614352b25 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -1656,21 +1656,6 @@ phys_addr_t __init_memblock memblock_reserved_size(void)
> return memblock.reserved.total_size;
> }
>
> -phys_addr_t __init memblock_mem_size(unsigned long limit_pfn)
> -{
> - unsigned long pages = 0;
> - unsigned long start_pfn, end_pfn;
> - int i;
> -
> - for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
> - start_pfn = min_t(unsigned long, start_pfn, limit_pfn);
> - end_pfn = min_t(unsigned long, end_pfn, limit_pfn);
> - pages += end_pfn - start_pfn;
> - }
> -
> - return PFN_PHYS(pages);
> -}
Reviewed-by: Baoquan He <bhe@redhat.com>
^ permalink raw reply
* Re: [PATCH v2 16/17] memblock: implement for_each_reserved_mem_region() using __next_mem_region()
From: Baoquan He @ 2020-08-05 9:11 UTC (permalink / raw)
To: Mike Rapoport
Cc: Emil Renner Berthing, linux-sh, Peter Zijlstra, Dave Hansen,
linux-mips, Max Filippov, Paul Mackerras, sparclinux, linux-riscv,
Will Deacon, Stafford Horne, Marek Szyprowski, linux-arch,
linux-s390, linux-c6x-dev, Yoshinori Sato, x86, Russell King,
Mike Rapoport, clang-built-linux, Ingo Molnar, linux-arm-kernel,
Catalin Marinas, uclinux-h8-devel, linux-xtensa, openrisc,
Borislav Petkov, Andy Lutomirski, Paul Walmsley, Thomas Gleixner,
Hari Bathini, Michal Simek, linux-mm, linuxppc-dev, linux-kernel,
iommu, Palmer Dabbelt, Andrew Morton, Christoph Hellwig
In-Reply-To: <20200802163601.8189-17-rppt@kernel.org>
On 08/02/20 at 07:36pm, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> Iteration over memblock.reserved with for_each_reserved_mem_region() used
> __next_reserved_mem_region() that implemented a subset of
> __next_mem_region().
>
> Use __for_each_mem_range() and, essentially, __next_mem_region() with
> appropriate parameters to reduce code duplication.
>
> While on it, rename for_each_reserved_mem_region() to
> for_each_reserved_mem_range() for consistency.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> .clang-format | 2 +-
> arch/arm64/kernel/setup.c | 2 +-
> drivers/irqchip/irq-gic-v3-its.c | 2 +-
> include/linux/memblock.h | 12 +++------
> mm/memblock.c | 46 +++++++-------------------------
> 5 files changed, 17 insertions(+), 47 deletions(-)
Reviewed-by: Baoquan He <bhe@redhat.com>
^ permalink raw reply
* [PATCH] powerpc/drmem: Don't compute the NUMA node for each LMB
From: Laurent Dufour @ 2020-08-05 9:28 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel; +Cc: nathanl, cheloha
All the LMB from the same set of ibm,dynamic-memory-v2 property are
sharing the same NUMA node. Don't compute that node for each one.
Tested on a system with 1022 LMBs spread on 4 NUMA nodes, only 4 calls to
lmb_set_nid() have been made instead of 1022.
This should prevent some soft lockups when starting large guests
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
---
arch/powerpc/mm/drmem.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/drmem.c b/arch/powerpc/mm/drmem.c
index b2eeea39684c..3819c523c65b 100644
--- a/arch/powerpc/mm/drmem.c
+++ b/arch/powerpc/mm/drmem.c
@@ -397,7 +397,7 @@ static void __init init_drmem_v1_lmbs(const __be32 *prop)
static void __init init_drmem_v2_lmbs(const __be32 *prop)
{
- struct drmem_lmb *lmb;
+ struct drmem_lmb *lmb, *first;
struct of_drconf_cell_v2 dr_cell;
const __be32 *p;
u32 i, j, lmb_sets;
@@ -422,10 +422,18 @@ static void __init init_drmem_v2_lmbs(const __be32 *prop)
/* second pass, read in the LMB information */
lmb_index = 0;
p = prop;
+ first = NULL;
for (i = 0; i < lmb_sets; i++) {
read_drconf_v2_cell(&dr_cell, &p);
+ /*
+ * Fetch the NUMA node id for the fist set or if the
+ * associativity index is different from the previous set.
+ */
+ if (first && dr_cell.aa_index != first->aa_index)
+ first = NULL;
+
for (j = 0; j < dr_cell.seq_lmbs; j++) {
lmb = &drmem_info->lmbs[lmb_index++];
@@ -438,7 +446,16 @@ static void __init init_drmem_v2_lmbs(const __be32 *prop)
lmb->aa_index = dr_cell.aa_index;
lmb->flags = dr_cell.flags;
- lmb_set_nid(lmb);
+ /*
+ * All the LMB in the set share the same NUMA
+ * associativity property. So read that node only once.
+ */
+ if (!first) {
+ lmb_set_nid(lmb);
+ first = lmb;
+ } else {
+ lmb->nid = first->nid;
+ }
}
}
}
--
2.28.0
^ permalink raw reply related
* Re: [PATCH v2 17/17] memblock: use separate iterators for memory and reserved regions
From: Baoquan He @ 2020-08-05 9:29 UTC (permalink / raw)
To: Mike Rapoport
Cc: Emil Renner Berthing, linux-sh, Peter Zijlstra, Dave Hansen,
linux-mips, Max Filippov, Paul Mackerras, sparclinux, linux-riscv,
Will Deacon, Stafford Horne, Marek Szyprowski, linux-arch,
linux-s390, linux-c6x-dev, Yoshinori Sato, x86, Russell King,
Mike Rapoport, clang-built-linux, Ingo Molnar, linux-arm-kernel,
Catalin Marinas, uclinux-h8-devel, linux-xtensa, openrisc,
Borislav Petkov, Andy Lutomirski, Paul Walmsley, Thomas Gleixner,
Hari Bathini, Michal Simek, linux-mm, linuxppc-dev, linux-kernel,
iommu, Palmer Dabbelt, Andrew Morton, Christoph Hellwig
In-Reply-To: <20200802163601.8189-18-rppt@kernel.org>
On 08/02/20 at 07:36pm, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> for_each_memblock() is used to iterate over memblock.memory in
> a few places that use data from memblock_region rather than the memory
> ranges.
>
> Introduce separate for_each_mem_region() and for_each_reserved_mem_region()
> to improve encapsulation of memblock internals from its users.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> .clang-format | 3 ++-
> arch/arm64/kernel/setup.c | 2 +-
> arch/arm64/mm/numa.c | 2 +-
> arch/mips/netlogic/xlp/setup.c | 2 +-
> arch/x86/mm/numa.c | 2 +-
> include/linux/memblock.h | 19 ++++++++++++++++---
> mm/memblock.c | 4 ++--
> mm/page_alloc.c | 8 ++++----
> 8 files changed, 28 insertions(+), 14 deletions(-)
>
...
> diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> index 9e51b3fd4134..a6970e058bd7 100644
> --- a/include/linux/memblock.h
> +++ b/include/linux/memblock.h
> @@ -522,9 +522,22 @@ static inline unsigned long memblock_region_reserved_end_pfn(const struct memblo
> return PFN_UP(reg->base + reg->size);
> }
>
> -#define for_each_memblock(memblock_type, region) \
> - for (region = memblock.memblock_type.regions; \
> - region < (memblock.memblock_type.regions + memblock.memblock_type.cnt); \
> +/**
> + * for_each_mem_region - itereate over registered memory regions
~~~~~~~~~~~~~~~~~
Wonder why emphasize 'registered' memory.
Other than this confusion to me, this patch looks good.
Reviewed-by: Baoquan He <bhe@redhat.com>
^ permalink raw reply
* [PATCH] macintosh: windfarm: fix spelling mistake "detatch" -> "detach"
From: Colin King @ 2020-08-05 10:43 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Wolfram Sang, colin.king, linuxppc-dev
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
There are spelling mistakes in DBG messages. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/macintosh/windfarm_lm75_sensor.c | 2 +-
drivers/macintosh/windfarm_lm87_sensor.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 1e5fa09845e7..a88f73af4d5e 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -152,7 +152,7 @@ static int wf_lm75_remove(struct i2c_client *client)
{
struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
- DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
+ DBG("wf_lm75: i2c detach called for %s\n", lm->sens.name);
/* Mark client detached */
lm->i2c = NULL;
diff --git a/drivers/macintosh/windfarm_lm87_sensor.c b/drivers/macintosh/windfarm_lm87_sensor.c
index d011899c0a8a..de8ef76a0ac8 100644
--- a/drivers/macintosh/windfarm_lm87_sensor.c
+++ b/drivers/macintosh/windfarm_lm87_sensor.c
@@ -149,7 +149,7 @@ static int wf_lm87_remove(struct i2c_client *client)
{
struct wf_lm87_sensor *lm = i2c_get_clientdata(client);
- DBG("wf_lm87: i2c detatch called for %s\n", lm->sens.name);
+ DBG("wf_lm87: i2c detach called for %s\n", lm->sens.name);
/* Mark client detached */
lm->i2c = NULL;
--
2.27.0
^ permalink raw reply related
* Re: [PATCH] powerpc/drmem: Don't compute the NUMA node for each LMB
From: kernel test robot @ 2020-08-05 10:43 UTC (permalink / raw)
To: Laurent Dufour, linuxppc-dev, linux-kernel; +Cc: nathanl, cheloha, kbuild-all
In-Reply-To: <20200805092858.64143-1-ldufour@linux.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 3560 bytes --]
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on powerpc/next]
[also build test ERROR on linux/master linus/master v5.8 next-20200804]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Dufour/powerpc-drmem-Don-t-compute-the-NUMA-node-for-each-LMB/20200805-173213
base: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: powerpc-mpc885_ads_defconfig (attached as .config)
compiler: powerpc-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
arch/powerpc/mm/drmem.c: In function 'init_drmem_v2_lmbs':
>> arch/powerpc/mm/drmem.c:457:8: error: 'struct drmem_lmb' has no member named 'nid'
457 | lmb->nid = first->nid;
| ^~
arch/powerpc/mm/drmem.c:457:21: error: 'struct drmem_lmb' has no member named 'nid'
457 | lmb->nid = first->nid;
| ^~
vim +457 arch/powerpc/mm/drmem.c
397
398 static void __init init_drmem_v2_lmbs(const __be32 *prop)
399 {
400 struct drmem_lmb *lmb, *first;
401 struct of_drconf_cell_v2 dr_cell;
402 const __be32 *p;
403 u32 i, j, lmb_sets;
404 int lmb_index;
405
406 lmb_sets = of_read_number(prop++, 1);
407 if (lmb_sets == 0)
408 return;
409
410 /* first pass, calculate the number of LMBs */
411 p = prop;
412 for (i = 0; i < lmb_sets; i++) {
413 read_drconf_v2_cell(&dr_cell, &p);
414 drmem_info->n_lmbs += dr_cell.seq_lmbs;
415 }
416
417 drmem_info->lmbs = kcalloc(drmem_info->n_lmbs, sizeof(*lmb),
418 GFP_KERNEL);
419 if (!drmem_info->lmbs)
420 return;
421
422 /* second pass, read in the LMB information */
423 lmb_index = 0;
424 p = prop;
425 first = NULL;
426
427 for (i = 0; i < lmb_sets; i++) {
428 read_drconf_v2_cell(&dr_cell, &p);
429
430 /*
431 * Fetch the NUMA node id for the fist set or if the
432 * associativity index is different from the previous set.
433 */
434 if (first && dr_cell.aa_index != first->aa_index)
435 first = NULL;
436
437 for (j = 0; j < dr_cell.seq_lmbs; j++) {
438 lmb = &drmem_info->lmbs[lmb_index++];
439
440 lmb->base_addr = dr_cell.base_addr;
441 dr_cell.base_addr += drmem_info->lmb_size;
442
443 lmb->drc_index = dr_cell.drc_index;
444 dr_cell.drc_index++;
445
446 lmb->aa_index = dr_cell.aa_index;
447 lmb->flags = dr_cell.flags;
448
449 /*
450 * All the LMB in the set share the same NUMA
451 * associativity property. So read that node only once.
452 */
453 if (!first) {
454 lmb_set_nid(lmb);
455 first = lmb;
456 } else {
> 457 lmb->nid = first->nid;
458 }
459 }
460 }
461 }
462
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 10853 bytes --]
^ permalink raw reply
* Re: [PATCH v2 17/17] memblock: use separate iterators for memory and reserved regions
From: Thomas Bogendoerfer @ 2020-08-05 10:58 UTC (permalink / raw)
To: Mike Rapoport
Cc: Thomas Gleixner, Emil Renner Berthing, linux-sh, Peter Zijlstra,
Dave Hansen, linux-mips, Max Filippov, Paul Mackerras, sparclinux,
linux-riscv, Will Deacon, Christoph Hellwig, Marek Szyprowski,
linux-arch, linux-s390, linux-c6x-dev, Baoquan He, x86,
Russell King, Mike Rapoport, clang-built-linux, Ingo Molnar,
linux-arm-kernel, Catalin Marinas, uclinux-h8-devel, linux-xtensa,
openrisc, Borislav Petkov, Andy Lutomirski, Paul Walmsley,
Stafford Horne, Hari Bathini, Michal Simek, Yoshinori Sato,
linux-mm, linux-kernel, iommu, Palmer Dabbelt, Andrew Morton,
linuxppc-dev
In-Reply-To: <20200802163601.8189-18-rppt@kernel.org>
On Sun, Aug 02, 2020 at 07:36:01PM +0300, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> for_each_memblock() is used to iterate over memblock.memory in
> a few places that use data from memblock_region rather than the memory
> ranges.
>
> Introduce separate for_each_mem_region() and for_each_reserved_mem_region()
> to improve encapsulation of memblock internals from its users.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> arch/mips/netlogic/xlp/setup.c | 2 +-
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply
* Re: [PATCH v2 12/17] arch, drivers: replace for_each_membock() with for_each_mem_range()
From: Thomas Bogendoerfer @ 2020-08-05 11:00 UTC (permalink / raw)
To: Mike Rapoport
Cc: Thomas Gleixner, Emil Renner Berthing, linux-sh, Peter Zijlstra,
Dave Hansen, linux-mips, Max Filippov, Paul Mackerras, sparclinux,
linux-riscv, Will Deacon, Christoph Hellwig, Marek Szyprowski,
linux-arch, linux-s390, linux-c6x-dev, Baoquan He, x86,
Russell King, Mike Rapoport, clang-built-linux, Ingo Molnar,
linux-arm-kernel, Catalin Marinas, uclinux-h8-devel, linux-xtensa,
openrisc, Borislav Petkov, Andy Lutomirski, Paul Walmsley,
Stafford Horne, Hari Bathini, Michal Simek, Yoshinori Sato,
linux-mm, linux-kernel, iommu, Palmer Dabbelt, Andrew Morton,
linuxppc-dev
In-Reply-To: <20200802163601.8189-13-rppt@kernel.org>
On Sun, Aug 02, 2020 at 07:35:56PM +0300, Mike Rapoport wrote:
> From: Mike Rapoport <rppt@linux.ibm.com>
>
> There are several occurrences of the following pattern:
>
> for_each_memblock(memory, reg) {
> start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
> end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));
>
> /* do something with start and end */
> }
>
> Using for_each_mem_range() iterator is more appropriate in such cases and
> allows simpler and cleaner code.
>
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> arch/mips/cavium-octeon/dma-octeon.c | 12 +++---
> arch/mips/kernel/setup.c | 31 +++++++--------
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]
^ permalink raw reply
* Re: [PATCH] powerpc/drmem: Don't compute the NUMA node for each LMB
From: Laurent Dufour @ 2020-08-05 12:23 UTC (permalink / raw)
To: kernel test robot, linuxppc-dev, linux-kernel
Cc: nathanl, cheloha, kbuild-all
In-Reply-To: <202008051807.Vi8NDJtX%lkp@intel.com>
Le 05/08/2020 à 12:43, kernel test robot a écrit :
> Hi Laurent,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on powerpc/next]
> [also build test ERROR on linux/master linus/master v5.8 next-20200804]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url: https://github.com/0day-ci/linux/commits/Laurent-Dufour/powerpc-drmem-Don-t-compute-the-NUMA-node-for-each-LMB/20200805-173213
> base: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
> config: powerpc-mpc885_ads_defconfig (attached as .config)
> compiler: powerpc-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> arch/powerpc/mm/drmem.c: In function 'init_drmem_v2_lmbs':
>>> arch/powerpc/mm/drmem.c:457:8: error: 'struct drmem_lmb' has no member named 'nid'
> 457 | lmb->nid = first->nid;
> | ^~
> arch/powerpc/mm/drmem.c:457:21: error: 'struct drmem_lmb' has no member named 'nid'
> 457 | lmb->nid = first->nid;
> | ^~
My mistake, the nid member is only present when CONFIG_MEMORY_HOTPLUG is set.
I'll send a new version fixing this.
> vim +457 arch/powerpc/mm/drmem.c
>
> 397
> 398 static void __init init_drmem_v2_lmbs(const __be32 *prop)
> 399 {
> 400 struct drmem_lmb *lmb, *first;
> 401 struct of_drconf_cell_v2 dr_cell;
> 402 const __be32 *p;
> 403 u32 i, j, lmb_sets;
> 404 int lmb_index;
> 405
> 406 lmb_sets = of_read_number(prop++, 1);
> 407 if (lmb_sets == 0)
> 408 return;
> 409
> 410 /* first pass, calculate the number of LMBs */
> 411 p = prop;
> 412 for (i = 0; i < lmb_sets; i++) {
> 413 read_drconf_v2_cell(&dr_cell, &p);
> 414 drmem_info->n_lmbs += dr_cell.seq_lmbs;
> 415 }
> 416
> 417 drmem_info->lmbs = kcalloc(drmem_info->n_lmbs, sizeof(*lmb),
> 418 GFP_KERNEL);
> 419 if (!drmem_info->lmbs)
> 420 return;
> 421
> 422 /* second pass, read in the LMB information */
> 423 lmb_index = 0;
> 424 p = prop;
> 425 first = NULL;
> 426
> 427 for (i = 0; i < lmb_sets; i++) {
> 428 read_drconf_v2_cell(&dr_cell, &p);
> 429
> 430 /*
> 431 * Fetch the NUMA node id for the fist set or if the
> 432 * associativity index is different from the previous set.
> 433 */
> 434 if (first && dr_cell.aa_index != first->aa_index)
> 435 first = NULL;
> 436
> 437 for (j = 0; j < dr_cell.seq_lmbs; j++) {
> 438 lmb = &drmem_info->lmbs[lmb_index++];
> 439
> 440 lmb->base_addr = dr_cell.base_addr;
> 441 dr_cell.base_addr += drmem_info->lmb_size;
> 442
> 443 lmb->drc_index = dr_cell.drc_index;
> 444 dr_cell.drc_index++;
> 445
> 446 lmb->aa_index = dr_cell.aa_index;
> 447 lmb->flags = dr_cell.flags;
> 448
> 449 /*
> 450 * All the LMB in the set share the same NUMA
> 451 * associativity property. So read that node only once.
> 452 */
> 453 if (!first) {
> 454 lmb_set_nid(lmb);
> 455 first = lmb;
> 456 } else {
> > 457 lmb->nid = first->nid;
> 458 }
> 459 }
> 460 }
> 461 }
> 462
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
>
^ permalink raw reply
* Re: [PATCH v3 2/4] powerpc/sstep: support emulation for vsx vector paired storage access instructions
From: Naveen N. Rao @ 2020-08-05 12:53 UTC (permalink / raw)
To: Balamuruhan S, mpe; +Cc: paulus, linuxppc-dev, sandipan, ravi.bangoria
In-Reply-To: <20200731081637.1837559-3-bala24@linux.ibm.com>
Balamuruhan S wrote:
> add emulate_step() changes to support vsx vector paired storage
> access instructions that provides octword operands loads/stores
> between storage and set of 64 Vector Scalar Registers (VSRs).
This should be squashed in with the previous patch. Otherwise, emulation
of these instructions won't be complete, which affects bisectability.
- Naveen
^ permalink raw reply
* [PATCH] usb: gadget: fix spelling mistake "Dectected" -> "Detected"
From: Colin King @ 2020-08-05 13:14 UTC (permalink / raw)
To: Li Yang, Felipe Balbi, Greg Kroah-Hartman, linux-usb,
linuxppc-dev
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index b2638e83bb49..c79407f2d577 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2061,7 +2061,7 @@ static int fsl_proc_read(struct seq_file *m, void *v)
"Sleep Enable: %d SOF Received Enable: %d "
"Reset Enable: %d\n"
"System Error Enable: %d "
- "Port Change Dectected Enable: %d\n"
+ "Port Change Detected Enable: %d\n"
"USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
--
2.27.0
^ permalink raw reply related
* Re: [PATCH][next] dmaengine: Use fallthrough pseudo-keyword
From: Vinod Koul @ 2020-08-05 13:19 UTC (permalink / raw)
To: Gustavo A. R. Silva
Cc: Song Liu, Alexei Starovoitov, Shawn Guo, Fabio Estevam,
Daniel Borkmann, John Fastabend, Zhang Wei, NXP Linux Team,
Yonghong Song, Andrii Nakryiko, Sascha Hauer, KP Singh,
Dan Williams, linux-arm-kernel, netdev, linux-kernel, Li Yang,
Pengutronix Kernel Team, dmaengine, bpf, linuxppc-dev,
Martin KaFai Lau
In-Reply-To: <20200727203413.GA6245@embeddedor>
On 27-07-20, 15:34, Gustavo A. R. Silva wrote:
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 2c508ee672b9..9b69716172a4 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -1061,16 +1061,16 @@ static bool _start(struct pl330_thread *thrd)
>
> if (_state(thrd) == PL330_STATE_KILLING)
> UNTIL(thrd, PL330_STATE_STOPPED)
> - /* fall through */
> + fallthrough;
>
> case PL330_STATE_FAULTING:
> _stop(thrd);
> - /* fall through */
> + fallthrough;
>
> case PL330_STATE_KILLING:
> case PL330_STATE_COMPLETING:
> UNTIL(thrd, PL330_STATE_STOPPED)
> - /* fall through */
> + fallthrough;
>
> case PL330_STATE_STOPPED:
> return _trigger(thrd);
> @@ -1121,7 +1121,6 @@ static u32 _emit_load(unsigned int dry_run, u8 buf[],
>
> switch (direction) {
> case DMA_MEM_TO_MEM:
> - /* fall through */
> case DMA_MEM_TO_DEV:
> off += _emit_LD(dry_run, &buf[off], cond);
> break;
> @@ -1155,7 +1154,6 @@ static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
>
> switch (direction) {
> case DMA_MEM_TO_MEM:
> - /* fall through */
> case DMA_DEV_TO_MEM:
> off += _emit_ST(dry_run, &buf[off], cond);
> break;
> @@ -1216,7 +1214,6 @@ static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
>
> switch (pxs->desc->rqtype) {
> case DMA_MEM_TO_DEV:
> - /* fall through */
> case DMA_DEV_TO_MEM:
> off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
> cond);
> @@ -1266,7 +1263,6 @@ static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
>
> switch (pxs->desc->rqtype) {
> case DMA_MEM_TO_DEV:
> - /* fall through */
replacement missed here and above few
--
~Vinod
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox