* [PATCH 19/20] ethernet: ucc_geth: inform the compiler that numQueues is always 1
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
The numQueuesTx and numQueuesRx members of struct ucc_geth_info are
never set to anything but 1, and never have been. It's unclear how
well the code supporting multiple queues would work. Until somebody
wants to play with enabling that, help the compiler eliminate a lot of
dead code and loops that are not really loops by creating static
inline helpers. If and when the numQueuesTx/numQueuesRx fields are
re-introduced, it suffices to update those helper to return the
appropriate field.
This cuts the .text segment of ucc_geth.o by 8%.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 76 +++++++++++++----------
drivers/net/ethernet/freescale/ucc_geth.h | 2 -
2 files changed, 42 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index a26d1feb7dab..3cad2255bd97 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -84,6 +84,16 @@ static int ucc_geth_thread_count(enum ucc_geth_num_of_threads idx)
return count[idx];
}
+static inline int ucc_geth_tx_queues(const struct ucc_geth_info *info)
+{
+ return 1;
+}
+
+static inline int ucc_geth_rx_queues(const struct ucc_geth_info *info)
+{
+ return 1;
+}
+
static const struct ucc_geth_info ugeth_primary_info = {
.uf_info = {
.rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES,
@@ -103,8 +113,6 @@ static const struct ucc_geth_info ugeth_primary_info = {
.tcrc = UCC_FAST_16_BIT_CRC,
.synl = UCC_FAST_SYNC_LEN_NOT_USED,
},
- .numQueuesTx = 1,
- .numQueuesRx = 1,
.extendedFilteringChainPointer = ((uint32_t) NULL),
.typeorlen = 3072 /*1536 */ ,
.nonBackToBackIfgPart1 = 0x40,
@@ -569,7 +577,7 @@ static void dump_bds(struct ucc_geth_private *ugeth)
int i;
int length;
- for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) {
+ for (i = 0; i < ucc_geth_tx_queues(ugeth->ug_info); i++) {
if (ugeth->p_tx_bd_ring[i]) {
length =
(ugeth->ug_info->bdRingLenTx[i] *
@@ -578,7 +586,7 @@ static void dump_bds(struct ucc_geth_private *ugeth)
mem_disp(ugeth->p_tx_bd_ring[i], length);
}
}
- for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ugeth->ug_info); i++) {
if (ugeth->p_rx_bd_ring[i]) {
length =
(ugeth->ug_info->bdRingLenRx[i] *
@@ -876,7 +884,7 @@ static void dump_regs(struct ucc_geth_private *ugeth)
if (ugeth->p_send_q_mem_reg) {
pr_info("Send Q memory registers:\n");
pr_info("Base address: 0x%08x\n", (u32)ugeth->p_send_q_mem_reg);
- for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) {
+ for (i = 0; i < ucc_geth_tx_queues(ugeth->ug_info); i++) {
pr_info("SQQD[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_send_q_mem_reg->sqqd[i]);
@@ -908,7 +916,7 @@ static void dump_regs(struct ucc_geth_private *ugeth)
pr_info("RX IRQ coalescing tables:\n");
pr_info("Base address: 0x%08x\n",
(u32)ugeth->p_rx_irq_coalescing_tbl);
- for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ugeth->ug_info); i++) {
pr_info("RX IRQ coalescing table entry[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_rx_irq_coalescing_tbl->
@@ -930,7 +938,7 @@ static void dump_regs(struct ucc_geth_private *ugeth)
if (ugeth->p_rx_bd_qs_tbl) {
pr_info("RX BD QS tables:\n");
pr_info("Base address: 0x%08x\n", (u32)ugeth->p_rx_bd_qs_tbl);
- for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ugeth->ug_info); i++) {
pr_info("RX BD QS table[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_rx_bd_qs_tbl[i]);
@@ -1806,7 +1814,7 @@ static void ucc_geth_free_rx(struct ucc_geth_private *ugeth)
ug_info = ugeth->ug_info;
uf_info = &ug_info->uf_info;
- for (i = 0; i < ugeth->ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ugeth->ug_info); i++) {
if (ugeth->p_rx_bd_ring[i]) {
/* Return existing data buffers in ring */
bd = ugeth->p_rx_bd_ring[i];
@@ -1846,7 +1854,7 @@ static void ucc_geth_free_tx(struct ucc_geth_private *ugeth)
ug_info = ugeth->ug_info;
uf_info = &ug_info->uf_info;
- for (i = 0; i < ugeth->ug_info->numQueuesTx; i++) {
+ for (i = 0; i < ucc_geth_tx_queues(ugeth->ug_info); i++) {
bd = ugeth->p_tx_bd_ring[i];
if (!bd)
continue;
@@ -2024,7 +2032,7 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
uf_info = &ug_info->uf_info;
/* Rx BD lengths */
- for (i = 0; i < ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++) {
if ((ug_info->bdRingLenRx[i] < UCC_GETH_RX_BD_RING_SIZE_MIN) ||
(ug_info->bdRingLenRx[i] %
UCC_GETH_RX_BD_RING_SIZE_ALIGNMENT)) {
@@ -2035,7 +2043,7 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
}
/* Tx BD lengths */
- for (i = 0; i < ug_info->numQueuesTx; i++) {
+ for (i = 0; i < ucc_geth_tx_queues(ug_info); i++) {
if (ug_info->bdRingLenTx[i] < UCC_GETH_TX_BD_RING_SIZE_MIN) {
if (netif_msg_probe(ugeth))
pr_err("Tx BD ring length must be no smaller than 2\n");
@@ -2052,14 +2060,14 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
}
/* num Tx queues */
- if (ug_info->numQueuesTx > NUM_TX_QUEUES) {
+ if (ucc_geth_tx_queues(ug_info) > NUM_TX_QUEUES) {
if (netif_msg_probe(ugeth))
pr_err("number of tx queues too large\n");
return -EINVAL;
}
/* num Rx queues */
- if (ug_info->numQueuesRx > NUM_RX_QUEUES) {
+ if (ucc_geth_rx_queues(ug_info) > NUM_RX_QUEUES) {
if (netif_msg_probe(ugeth))
pr_err("number of rx queues too large\n");
return -EINVAL;
@@ -2067,7 +2075,7 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
/* l2qt */
for (i = 0; i < UCC_GETH_VLAN_PRIORITY_MAX; i++) {
- if (ug_info->l2qt[i] >= ug_info->numQueuesRx) {
+ if (ug_info->l2qt[i] >= ucc_geth_rx_queues(ug_info)) {
if (netif_msg_probe(ugeth))
pr_err("VLAN priority table entry must not be larger than number of Rx queues\n");
return -EINVAL;
@@ -2076,7 +2084,7 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
/* l3qt */
for (i = 0; i < UCC_GETH_IP_PRIORITY_MAX; i++) {
- if (ug_info->l3qt[i] >= ug_info->numQueuesRx) {
+ if (ug_info->l3qt[i] >= ucc_geth_rx_queues(ug_info)) {
if (netif_msg_probe(ugeth))
pr_err("IP priority table entry must not be larger than number of Rx queues\n");
return -EINVAL;
@@ -2099,10 +2107,10 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
/* Generate uccm_mask for receive */
uf_info->uccm_mask = ug_info->eventRegMask & UCCE_OTHER;/* Errors */
- for (i = 0; i < ug_info->numQueuesRx; i++)
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++)
uf_info->uccm_mask |= (UCC_GETH_UCCE_RXF0 << i);
- for (i = 0; i < ug_info->numQueuesTx; i++)
+ for (i = 0; i < ucc_geth_tx_queues(ug_info); i++)
uf_info->uccm_mask |= (UCC_GETH_UCCE_TXB0 << i);
/* Initialize the general fast UCC block. */
if (ucc_fast_init(uf_info, &ugeth->uccf)) {
@@ -2141,7 +2149,7 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
uf_info = &ug_info->uf_info;
/* Allocate Tx bds */
- for (j = 0; j < ug_info->numQueuesTx; j++) {
+ for (j = 0; j < ucc_geth_tx_queues(ug_info); j++) {
u32 align = UCC_GETH_TX_BD_RING_ALIGNMENT;
/* Allocate in multiple of
@@ -2174,7 +2182,7 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
}
/* Init Tx bds */
- for (j = 0; j < ug_info->numQueuesTx; j++) {
+ for (j = 0; j < ucc_geth_tx_queues(ug_info); j++) {
/* Setup the skbuff rings */
ugeth->tx_skbuff[j] =
kcalloc(ugeth->ug_info->bdRingLenTx[j],
@@ -2215,7 +2223,7 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
uf_info = &ug_info->uf_info;
/* Allocate Rx bds */
- for (j = 0; j < ug_info->numQueuesRx; j++) {
+ for (j = 0; j < ucc_geth_rx_queues(ug_info); j++) {
u32 align = UCC_GETH_RX_BD_RING_ALIGNMENT;
length = ug_info->bdRingLenRx[j] * sizeof(struct qe_bd);
@@ -2234,7 +2242,7 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
}
/* Init Rx bds */
- for (j = 0; j < ug_info->numQueuesRx; j++) {
+ for (j = 0; j < ucc_geth_rx_queues(ug_info); j++) {
/* Setup the skbuff rings */
ugeth->rx_skbuff[j] =
kcalloc(ugeth->ug_info->bdRingLenRx[j],
@@ -2437,7 +2445,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* SQPTR */
/* Size varies with number of Tx queues */
ugeth->send_q_mem_reg_offset =
- qe_muram_alloc(ug_info->numQueuesTx *
+ qe_muram_alloc(ucc_geth_tx_queues(ug_info) *
sizeof(struct ucc_geth_send_queue_qd),
UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
if (IS_ERR_VALUE(ugeth->send_q_mem_reg_offset)) {
@@ -2453,7 +2461,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* Setup the table */
/* Assume BD rings are already established */
- for (i = 0; i < ug_info->numQueuesTx; i++) {
+ for (i = 0; i < ucc_geth_tx_queues(ug_info); i++) {
endOfRing =
ugeth->p_tx_bd_ring[i] + (ug_info->bdRingLenTx[i] -
1) * sizeof(struct qe_bd);
@@ -2466,7 +2474,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* schedulerbasepointer */
- if (ug_info->numQueuesTx > 1) {
+ if (ucc_geth_tx_queues(ug_info) > 1) {
/* scheduler exists only if more than 1 tx queue */
ugeth->scheduler_offset =
qe_muram_alloc(sizeof(struct ucc_geth_scheduler),
@@ -2529,11 +2537,11 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* temoder */
/* Already has speed set */
- if (ug_info->numQueuesTx > 1)
+ if (ucc_geth_tx_queues(ug_info) > 1)
temoder |= TEMODER_SCHEDULER_ENABLE;
if (ug_info->ipCheckSumGenerate)
temoder |= TEMODER_IP_CHECKSUM_GENERATE;
- temoder |= ((ug_info->numQueuesTx - 1) << TEMODER_NUM_OF_QUEUES_SHIFT);
+ temoder |= ((ucc_geth_tx_queues(ug_info) - 1) << TEMODER_NUM_OF_QUEUES_SHIFT);
out_be16(&ugeth->p_tx_glbl_pram->temoder, temoder);
/* Function code register value to be used later */
@@ -2597,7 +2605,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* Size varies with number of Rx queues */
ugeth->rx_irq_coalescing_tbl_offset =
- qe_muram_alloc(ug_info->numQueuesRx *
+ qe_muram_alloc(ucc_geth_rx_queues(ug_info) *
sizeof(struct ucc_geth_rx_interrupt_coalescing_entry)
+ 4, UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT);
if (IS_ERR_VALUE(ugeth->rx_irq_coalescing_tbl_offset)) {
@@ -2613,7 +2621,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ugeth->rx_irq_coalescing_tbl_offset);
/* Fill interrupt coalescing table */
- for (i = 0; i < ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++) {
out_be32(&ugeth->p_rx_irq_coalescing_tbl->coalescingentry[i].
interruptcoalescingmaxvalue,
ug_info->interruptcoalescingmaxvalue[i]);
@@ -2662,7 +2670,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* RBDQPTR */
/* Size varies with number of Rx queues */
ugeth->rx_bd_qs_tbl_offset =
- qe_muram_alloc(ug_info->numQueuesRx *
+ qe_muram_alloc(ucc_geth_rx_queues(ug_info) *
(sizeof(struct ucc_geth_rx_bd_queues_entry) +
sizeof(struct ucc_geth_rx_prefetched_bds)),
UCC_GETH_RX_BD_QUEUES_ALIGNMENT);
@@ -2679,7 +2687,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* Setup the table */
/* Assume BD rings are already established */
- for (i = 0; i < ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++) {
out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr,
(u32) virt_to_phys(ugeth->p_rx_bd_ring[i]));
/* rest of fields handled by QE */
@@ -2702,7 +2710,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ug_info->
vlanOperationNonTagged << REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT;
remoder |= ug_info->rxQoSMode << REMODER_RX_QOS_MODE_SHIFT;
- remoder |= ((ug_info->numQueuesRx - 1) << REMODER_NUM_OF_QUEUES_SHIFT);
+ remoder |= ((ucc_geth_rx_queues(ug_info) - 1) << REMODER_NUM_OF_QUEUES_SHIFT);
if (ug_info->ipCheckSumCheck)
remoder |= REMODER_IP_CHECKSUM_CHECK;
if (ug_info->ipAddressAlignment)
@@ -2861,7 +2869,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
}
/* Load Rx bds with buffers */
- for (i = 0; i < ug_info->numQueuesRx; i++) {
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++) {
if ((ret_val = rx_bd_buffer_set(ugeth, (u8) i)) != 0) {
if (netif_msg_ifup(ugeth))
pr_err("Can not fill Rx bds with buffers\n");
@@ -3132,12 +3140,12 @@ static int ucc_geth_poll(struct napi_struct *napi, int budget)
/* Tx event processing */
spin_lock(&ugeth->lock);
- for (i = 0; i < ug_info->numQueuesTx; i++)
+ for (i = 0; i < ucc_geth_tx_queues(ug_info); i++)
ucc_geth_tx(ugeth->ndev, i);
spin_unlock(&ugeth->lock);
howmany = 0;
- for (i = 0; i < ug_info->numQueuesRx; i++)
+ for (i = 0; i < ucc_geth_rx_queues(ug_info); i++)
howmany += ucc_geth_rx(ugeth, i, budget - howmany);
if (howmany < budget) {
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index be47fa8ced15..6539fed9cc22 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -1077,8 +1077,6 @@ struct ucc_geth_tad_params {
/* GETH protocol initialization structure */
struct ucc_geth_info {
struct ucc_fast_info uf_info;
- u8 numQueuesTx;
- u8 numQueuesRx;
int ipCheckSumCheck;
int ipCheckSumGenerate;
int rxExtendedFiltering;
--
2.23.0
^ permalink raw reply related
* [PATCH 18/20] ethernet: ucc_geth: add helper to replace repeated switch statements
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
The translation from the ucc_geth_num_of_threads enum value to the
actual count can be written somewhat more compactly with a small
lookup table, allowing us to replace the four switch statements.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 100 +++++-----------------
1 file changed, 22 insertions(+), 78 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 3aebea191b52..a26d1feb7dab 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -70,6 +70,20 @@ static struct {
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 0xffff=all)");
+static int ucc_geth_thread_count(enum ucc_geth_num_of_threads idx)
+{
+ static const u8 count[] = {
+ [UCC_GETH_NUM_OF_THREADS_1] = 1,
+ [UCC_GETH_NUM_OF_THREADS_2] = 2,
+ [UCC_GETH_NUM_OF_THREADS_4] = 4,
+ [UCC_GETH_NUM_OF_THREADS_6] = 6,
+ [UCC_GETH_NUM_OF_THREADS_8] = 8,
+ };
+ if (idx >= ARRAY_SIZE(count))
+ return 0;
+ return count[idx];
+}
+
static const struct ucc_geth_info ugeth_primary_info = {
.uf_info = {
.rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES,
@@ -668,32 +682,12 @@ static void dump_regs(struct ucc_geth_private *ugeth)
in_be32(&ugeth->ug_regs->scam));
if (ugeth->p_thread_data_tx) {
- int numThreadsTxNumerical;
- switch (ugeth->ug_info->numThreadsTx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsTxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsTxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsTxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsTxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsTxNumerical = 8;
- break;
- default:
- numThreadsTxNumerical = 0;
- break;
- }
+ int count = ucc_geth_thread_count(ugeth->ug_info->numThreadsTx);
pr_info("Thread data TXs:\n");
pr_info("Base address: 0x%08x\n",
(u32)ugeth->p_thread_data_tx);
- for (i = 0; i < numThreadsTxNumerical; i++) {
+ for (i = 0; i < count; i++) {
pr_info("Thread data TX[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_thread_data_tx[i]);
@@ -702,32 +696,12 @@ static void dump_regs(struct ucc_geth_private *ugeth)
}
}
if (ugeth->p_thread_data_rx) {
- int numThreadsRxNumerical;
- switch (ugeth->ug_info->numThreadsRx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsRxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsRxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsRxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsRxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsRxNumerical = 8;
- break;
- default:
- numThreadsRxNumerical = 0;
- break;
- }
+ int count = ucc_geth_thread_count(ugeth->ug_info->numThreadsRx);
pr_info("Thread data RX:\n");
pr_info("Base address: 0x%08x\n",
(u32)ugeth->p_thread_data_rx);
- for (i = 0; i < numThreadsRxNumerical; i++) {
+ for (i = 0; i < count; i++) {
pr_info("Thread data RX[%d]:\n", i);
pr_info("Base address: 0x%08x\n",
(u32)&ugeth->p_thread_data_rx[i]);
@@ -2315,45 +2289,15 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
uf_regs = uccf->uf_regs;
ug_regs = ugeth->ug_regs;
- switch (ug_info->numThreadsRx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsRxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsRxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsRxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsRxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsRxNumerical = 8;
- break;
- default:
+ numThreadsRxNumerical = ucc_geth_thread_count(ug_info->numThreadsRx);
+ if (!numThreadsRxNumerical) {
if (netif_msg_ifup(ugeth))
pr_err("Bad number of Rx threads value\n");
return -EINVAL;
}
- switch (ug_info->numThreadsTx) {
- case UCC_GETH_NUM_OF_THREADS_1:
- numThreadsTxNumerical = 1;
- break;
- case UCC_GETH_NUM_OF_THREADS_2:
- numThreadsTxNumerical = 2;
- break;
- case UCC_GETH_NUM_OF_THREADS_4:
- numThreadsTxNumerical = 4;
- break;
- case UCC_GETH_NUM_OF_THREADS_6:
- numThreadsTxNumerical = 6;
- break;
- case UCC_GETH_NUM_OF_THREADS_8:
- numThreadsTxNumerical = 8;
- break;
- default:
+ numThreadsTxNumerical = ucc_geth_thread_count(ug_info->numThreadsTx);
+ if (!numThreadsTxNumerical) {
if (netif_msg_ifup(ugeth))
pr_err("Bad number of Tx threads value\n");
return -EINVAL;
--
2.23.0
^ permalink raw reply related
* [PATCH 17/20] ethernet: ucc_geth: replace kmalloc_array()+for loop by kcalloc()
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index c9f619908561..3aebea191b52 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2203,8 +2203,8 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
for (j = 0; j < ug_info->numQueuesTx; j++) {
/* Setup the skbuff rings */
ugeth->tx_skbuff[j] =
- kmalloc_array(ugeth->ug_info->bdRingLenTx[j],
- sizeof(struct sk_buff *), GFP_KERNEL);
+ kcalloc(ugeth->ug_info->bdRingLenTx[j],
+ sizeof(struct sk_buff *), GFP_KERNEL);
if (ugeth->tx_skbuff[j] == NULL) {
if (netif_msg_ifup(ugeth))
@@ -2212,9 +2212,6 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
return -ENOMEM;
}
- for (i = 0; i < ugeth->ug_info->bdRingLenTx[j]; i++)
- ugeth->tx_skbuff[j][i] = NULL;
-
ugeth->skb_curtx[j] = ugeth->skb_dirtytx[j] = 0;
bd = ugeth->confBd[j] = ugeth->txBd[j] = ugeth->p_tx_bd_ring[j];
for (i = 0; i < ug_info->bdRingLenTx[j]; i++) {
@@ -2266,8 +2263,8 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
for (j = 0; j < ug_info->numQueuesRx; j++) {
/* Setup the skbuff rings */
ugeth->rx_skbuff[j] =
- kmalloc_array(ugeth->ug_info->bdRingLenRx[j],
- sizeof(struct sk_buff *), GFP_KERNEL);
+ kcalloc(ugeth->ug_info->bdRingLenRx[j],
+ sizeof(struct sk_buff *), GFP_KERNEL);
if (ugeth->rx_skbuff[j] == NULL) {
if (netif_msg_ifup(ugeth))
@@ -2275,9 +2272,6 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
return -ENOMEM;
}
- for (i = 0; i < ugeth->ug_info->bdRingLenRx[j]; i++)
- ugeth->rx_skbuff[j][i] = NULL;
-
ugeth->skb_currx[j] = 0;
bd = ugeth->rxBd[j] = ugeth->p_rx_bd_ring[j];
for (i = 0; i < ug_info->bdRingLenRx[j]; i++) {
--
2.23.0
^ permalink raw reply related
* [PATCH 16/20] ethernet: ucc_geth: remove bd_mem_part and all associated code
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
The bd_mem_part member of ucc_geth_info always has the value
MEM_PART_SYSTEM, and AFAICT, there has never been any code setting it
to any other value. Moreover, muram is a somewhat precious resource,
so there's no point using that when normal memory serves just as well.
Apart from removing a lot of dead code, this is also motivated by
wanting to clean up the "store result from kmalloc() in a u32" mess.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 106 ++++++----------------
include/soc/fsl/qe/qe.h | 6 --
include/soc/fsl/qe/ucc_fast.h | 1 -
3 files changed, 29 insertions(+), 84 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index ccde42f547b8..c9f619908561 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -72,7 +72,6 @@ MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 0xffff=all)");
static const struct ucc_geth_info ugeth_primary_info = {
.uf_info = {
- .bd_mem_part = MEM_PART_SYSTEM,
.rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES,
.max_rx_buf_length = 1536,
/* adjusted at startup if max-speed 1000 */
@@ -1854,12 +1853,7 @@ static void ucc_geth_free_rx(struct ucc_geth_private *ugeth)
kfree(ugeth->rx_skbuff[i]);
- if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_SYSTEM)
- kfree((void *)ugeth->rx_bd_ring_offset[i]);
- else if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_MURAM)
- qe_muram_free(ugeth->rx_bd_ring_offset[i]);
+ kfree((void *)ugeth->rx_bd_ring_offset[i]);
ugeth->p_rx_bd_ring[i] = NULL;
}
}
@@ -1897,12 +1891,7 @@ static void ucc_geth_free_tx(struct ucc_geth_private *ugeth)
kfree(ugeth->tx_skbuff[i]);
if (ugeth->p_tx_bd_ring[i]) {
- if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_SYSTEM)
- kfree((void *)ugeth->tx_bd_ring_offset[i]);
- else if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_MURAM)
- qe_muram_free(ugeth->tx_bd_ring_offset[i]);
+ kfree((void *)ugeth->tx_bd_ring_offset[i]);
ugeth->p_tx_bd_ring[i] = NULL;
}
}
@@ -2060,13 +2049,6 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
ug_info = ugeth->ug_info;
uf_info = &ug_info->uf_info;
- if (!((uf_info->bd_mem_part == MEM_PART_SYSTEM) ||
- (uf_info->bd_mem_part == MEM_PART_MURAM))) {
- if (netif_msg_probe(ugeth))
- pr_err("Bad memory partition value\n");
- return -EINVAL;
- }
-
/* Rx BD lengths */
for (i = 0; i < ug_info->numQueuesRx; i++) {
if ((ug_info->bdRingLenRx[i] < UCC_GETH_RX_BD_RING_SIZE_MIN) ||
@@ -2186,6 +2168,8 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
/* Allocate Tx bds */
for (j = 0; j < ug_info->numQueuesTx; j++) {
+ u32 align = UCC_GETH_TX_BD_RING_ALIGNMENT;
+
/* Allocate in multiple of
UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT,
according to spec */
@@ -2195,24 +2179,15 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
if ((ug_info->bdRingLenTx[j] * sizeof(struct qe_bd)) %
UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT)
length += UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
- if (uf_info->bd_mem_part == MEM_PART_SYSTEM) {
- u32 align = UCC_GETH_TX_BD_RING_ALIGNMENT;
- ugeth->tx_bd_ring_offset[j] =
- (u32) kmalloc((u32) (length + align), GFP_KERNEL);
-
- if (ugeth->tx_bd_ring_offset[j] != 0)
- ugeth->p_tx_bd_ring[j] =
- (u8 __iomem *)((ugeth->tx_bd_ring_offset[j] +
- align) & ~(align - 1));
- } else if (uf_info->bd_mem_part == MEM_PART_MURAM) {
- ugeth->tx_bd_ring_offset[j] =
- qe_muram_alloc(length,
- UCC_GETH_TX_BD_RING_ALIGNMENT);
- if (!IS_ERR_VALUE(ugeth->tx_bd_ring_offset[j]))
- ugeth->p_tx_bd_ring[j] =
- (u8 __iomem *) qe_muram_addr(ugeth->
- tx_bd_ring_offset[j]);
- }
+
+ ugeth->tx_bd_ring_offset[j] =
+ (u32) kmalloc((u32) (length + align), GFP_KERNEL);
+
+ if (ugeth->tx_bd_ring_offset[j] != 0)
+ ugeth->p_tx_bd_ring[j] =
+ (u8 __iomem *)((ugeth->tx_bd_ring_offset[j] +
+ align) & ~(align - 1));
+
if (!ugeth->p_tx_bd_ring[j]) {
if (netif_msg_ifup(ugeth))
pr_err("Can not allocate memory for Tx bd rings\n");
@@ -2270,24 +2245,16 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
/* Allocate Rx bds */
for (j = 0; j < ug_info->numQueuesRx; j++) {
+ u32 align = UCC_GETH_RX_BD_RING_ALIGNMENT;
+
length = ug_info->bdRingLenRx[j] * sizeof(struct qe_bd);
- if (uf_info->bd_mem_part == MEM_PART_SYSTEM) {
- u32 align = UCC_GETH_RX_BD_RING_ALIGNMENT;
- ugeth->rx_bd_ring_offset[j] =
- (u32) kmalloc((u32) (length + align), GFP_KERNEL);
- if (ugeth->rx_bd_ring_offset[j] != 0)
- ugeth->p_rx_bd_ring[j] =
- (u8 __iomem *)((ugeth->rx_bd_ring_offset[j] +
- align) & ~(align - 1));
- } else if (uf_info->bd_mem_part == MEM_PART_MURAM) {
- ugeth->rx_bd_ring_offset[j] =
- qe_muram_alloc(length,
- UCC_GETH_RX_BD_RING_ALIGNMENT);
- if (!IS_ERR_VALUE(ugeth->rx_bd_ring_offset[j]))
- ugeth->p_rx_bd_ring[j] =
- (u8 __iomem *) qe_muram_addr(ugeth->
- rx_bd_ring_offset[j]);
- }
+ ugeth->rx_bd_ring_offset[j] =
+ (u32) kmalloc((u32) (length + align), GFP_KERNEL);
+ if (ugeth->rx_bd_ring_offset[j] != 0)
+ ugeth->p_rx_bd_ring[j] =
+ (u8 __iomem *)((ugeth->rx_bd_ring_offset[j] +
+ align) & ~(align - 1));
+
if (!ugeth->p_rx_bd_ring[j]) {
if (netif_msg_ifup(ugeth))
pr_err("Can not allocate memory for Rx bd rings\n");
@@ -2552,20 +2519,11 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
endOfRing =
ugeth->p_tx_bd_ring[i] + (ug_info->bdRingLenTx[i] -
1) * sizeof(struct qe_bd);
- if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) {
- out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base,
- (u32) virt_to_phys(ugeth->p_tx_bd_ring[i]));
- out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].
- last_bd_completed_address,
- (u32) virt_to_phys(endOfRing));
- } else if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_MURAM) {
- out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base,
- (u32)qe_muram_dma(ugeth->p_tx_bd_ring[i]));
- out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].
- last_bd_completed_address,
- (u32)qe_muram_dma(endOfRing));
- }
+ out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base,
+ (u32) virt_to_phys(ugeth->p_tx_bd_ring[i]));
+ out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].
+ last_bd_completed_address,
+ (u32) virt_to_phys(endOfRing));
}
/* schedulerbasepointer */
@@ -2784,14 +2742,8 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* Setup the table */
/* Assume BD rings are already established */
for (i = 0; i < ug_info->numQueuesRx; i++) {
- if (ugeth->ug_info->uf_info.bd_mem_part == MEM_PART_SYSTEM) {
- out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr,
- (u32) virt_to_phys(ugeth->p_rx_bd_ring[i]));
- } else if (ugeth->ug_info->uf_info.bd_mem_part ==
- MEM_PART_MURAM) {
- out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr,
- (u32)qe_muram_dma(ugeth->p_rx_bd_ring[i]));
- }
+ out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr,
+ (u32) virt_to_phys(ugeth->p_rx_bd_ring[i]));
/* rest of fields handled by QE */
}
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 66f1afc393d1..4925a1b59dc9 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -27,12 +27,6 @@
#define QE_NUM_OF_BRGS 16
#define QE_NUM_OF_PORTS 1024
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM 0
-#define MEM_PART_SECONDARY 1
-#define MEM_PART_MURAM 2
-
/* Clocks and BRGs */
enum qe_clock {
QE_CLK_NONE = 0,
diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h
index dc4e79468094..9696a5b9b5d1 100644
--- a/include/soc/fsl/qe/ucc_fast.h
+++ b/include/soc/fsl/qe/ucc_fast.h
@@ -146,7 +146,6 @@ struct ucc_fast_info {
resource_size_t regs;
int irq;
u32 uccm_mask;
- int bd_mem_part;
int brkpt_support;
int grant_support;
int tsa;
--
2.23.0
^ permalink raw reply related
* [PATCH 15/20] ethernet: ucc_geth: use UCC_GETH_{RX, TX}_BD_RING_ALIGNMENT macros directly
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
These macros both have the value 32, there's no point first
initializing align to a lower value.
If anything, one could throw in a
BUILD_BUG_ON(UCC_GETH_TX_BD_RING_ALIGNMENT < 4), but it's not worth it
- lots of code depends on named constants having sensible values.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 273342233bba..ccde42f547b8 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2196,9 +2196,7 @@ static int ucc_geth_alloc_tx(struct ucc_geth_private *ugeth)
UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT)
length += UCC_GETH_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
if (uf_info->bd_mem_part == MEM_PART_SYSTEM) {
- u32 align = 4;
- if (UCC_GETH_TX_BD_RING_ALIGNMENT > 4)
- align = UCC_GETH_TX_BD_RING_ALIGNMENT;
+ u32 align = UCC_GETH_TX_BD_RING_ALIGNMENT;
ugeth->tx_bd_ring_offset[j] =
(u32) kmalloc((u32) (length + align), GFP_KERNEL);
@@ -2274,9 +2272,7 @@ static int ucc_geth_alloc_rx(struct ucc_geth_private *ugeth)
for (j = 0; j < ug_info->numQueuesRx; j++) {
length = ug_info->bdRingLenRx[j] * sizeof(struct qe_bd);
if (uf_info->bd_mem_part == MEM_PART_SYSTEM) {
- u32 align = 4;
- if (UCC_GETH_RX_BD_RING_ALIGNMENT > 4)
- align = UCC_GETH_RX_BD_RING_ALIGNMENT;
+ u32 align = UCC_GETH_RX_BD_RING_ALIGNMENT;
ugeth->rx_bd_ring_offset[j] =
(u32) kmalloc((u32) (length + align), GFP_KERNEL);
if (ugeth->rx_bd_ring_offset[j] != 0)
--
2.23.0
^ permalink raw reply related
* [PATCH 14/20] ethernet: ucc_geth: don't statically allocate eight ucc_geth_info
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
struct ucc_geth_info is somewhat large, and on systems with only one
or two UCC instances, that just wastes a few KB of memory. So
allocate and populate a chunk of memory at probe time instead of
initializing them all during driver init.
Note that the existing "ug_info == NULL" check was dead code, as the
address of some static array element can obviously never be NULL.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 32 +++++++++--------------
1 file changed, 12 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index a06744d8b4af..273342233bba 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -157,8 +157,6 @@ static const struct ucc_geth_info ugeth_primary_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
};
-static struct ucc_geth_info ugeth_info[8];
-
#ifdef DEBUG
static void mem_disp(u8 *addr, int size)
{
@@ -3714,25 +3712,23 @@ static int ucc_geth_probe(struct platform_device* ofdev)
if ((ucc_num < 0) || (ucc_num > 7))
return -ENODEV;
- ug_info = &ugeth_info[ucc_num];
- if (ug_info == NULL) {
- if (netif_msg_probe(&debug))
- pr_err("[%d] Missing additional data!\n", ucc_num);
- return -ENODEV;
- }
+ ug_info = kmalloc(sizeof(*ug_info), GFP_KERNEL);
+ if (ug_info == NULL)
+ return -ENOMEM;
+ memcpy(ug_info, &ugeth_primary_info, sizeof(*ug_info));
ug_info->uf_info.ucc_num = ucc_num;
err = ucc_geth_parse_clock(np, "rx", &ug_info->uf_info.rx_clock);
if (err)
- return err;
+ goto err_free_info;
err = ucc_geth_parse_clock(np, "tx", &ug_info->uf_info.tx_clock);
if (err)
- return err;
+ goto err_free_info;
err = of_address_to_resource(np, 0, &res);
if (err)
- return -EINVAL;
+ goto err_free_info;
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
@@ -3745,7 +3741,7 @@ static int ucc_geth_probe(struct platform_device* ofdev)
*/
err = of_phy_register_fixed_link(np);
if (err)
- return err;
+ goto err_free_info;
ug_info->phy_node = of_node_get(np);
}
@@ -3876,6 +3872,8 @@ static int ucc_geth_probe(struct platform_device* ofdev)
of_phy_deregister_fixed_link(np);
of_node_put(ug_info->tbi_node);
of_node_put(ug_info->phy_node);
+err_free_info:
+ kfree(ug_info);
return err;
}
@@ -3886,6 +3884,7 @@ static int ucc_geth_remove(struct platform_device* ofdev)
struct ucc_geth_private *ugeth = netdev_priv(dev);
struct device_node *np = ofdev->dev.of_node;
+ kfree(ugeth->ug_info);
ucc_geth_memclean(ugeth);
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
@@ -3920,17 +3919,10 @@ static struct platform_driver ucc_geth_driver = {
static int __init ucc_geth_init(void)
{
- int i, ret;
-
if (netif_msg_drv(&debug))
pr_info(DRV_DESC "\n");
- for (i = 0; i < 8; i++)
- memcpy(&(ugeth_info[i]), &ugeth_primary_info,
- sizeof(ugeth_primary_info));
-
- ret = platform_driver_register(&ucc_geth_driver);
- return ret;
+ return platform_driver_register(&ucc_geth_driver);
}
static void __exit ucc_geth_exit(void)
--
2.23.0
^ permalink raw reply related
* [PATCH 13/20] ethernet: ucc_geth: constify ugeth_primary_info
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 700eafef4921..a06744d8b4af 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -70,7 +70,7 @@ static struct {
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 0xffff=all)");
-static struct ucc_geth_info ugeth_primary_info = {
+static const struct ucc_geth_info ugeth_primary_info = {
.uf_info = {
.bd_mem_part = MEM_PART_SYSTEM,
.rtsm = UCC_FAST_SEND_IDLES_BETWEEN_FRAMES,
--
2.23.0
^ permalink raw reply related
* [PATCH 11/20] ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index b132fcfc7c17..ba911d05d36d 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3895,13 +3895,13 @@ static int ucc_geth_remove(struct platform_device* ofdev)
struct ucc_geth_private *ugeth = netdev_priv(dev);
struct device_node *np = ofdev->dev.of_node;
- unregister_netdev(dev);
- free_netdev(dev);
ucc_geth_memclean(ugeth);
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
of_node_put(ugeth->ug_info->tbi_node);
of_node_put(ugeth->ug_info->phy_node);
+ unregister_netdev(dev);
+ free_netdev(dev);
return 0;
}
--
2.23.0
^ permalink raw reply related
* [PATCH 12/20] ethernet: ucc_geth: factor out parsing of {rx, tx}-clock{, -name} properties
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Reduce the code duplication a bit by moving the parsing of
rx-clock-name and the fallback handling to a helper function.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 79 ++++++++++-------------
1 file changed, 35 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index ba911d05d36d..700eafef4921 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3646,6 +3646,35 @@ static const struct net_device_ops ucc_geth_netdev_ops = {
#endif
};
+static int ucc_geth_parse_clock(struct device_node *np, const char *which,
+ enum qe_clock *out)
+{
+ const char *sprop;
+ char buf[24];
+
+ snprintf(buf, sizeof(buf), "%s-clock-name", which);
+ sprop = of_get_property(np, buf, NULL);
+ if (sprop) {
+ *out = qe_clock_source(sprop);
+ } else {
+ u32 val;
+
+ snprintf(buf, sizeof(buf), "%s-clock", which);
+ if (of_property_read_u32(np, buf, &val)) {
+ /* If both *-clock-name and *-clock are missing,
+ we want to tell people to use *-clock-name. */
+ pr_err("missing %s-name property\n", buf);
+ return -EINVAL;
+ }
+ *out = val;
+ }
+ if (*out < QE_CLK_NONE || *out > QE_CLK24) {
+ pr_err("invalid %s property\n", buf);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int ucc_geth_probe(struct platform_device* ofdev)
{
struct device *device = &ofdev->dev;
@@ -3656,7 +3685,6 @@ static int ucc_geth_probe(struct platform_device* ofdev)
struct resource res;
int err, ucc_num, max_speed = 0;
const unsigned int *prop;
- const char *sprop;
const void *mac_addr;
phy_interface_t phy_interface;
static const int enet_to_speed[] = {
@@ -3695,49 +3723,12 @@ static int ucc_geth_probe(struct platform_device* ofdev)
ug_info->uf_info.ucc_num = ucc_num;
- sprop = of_get_property(np, "rx-clock-name", NULL);
- if (sprop) {
- ug_info->uf_info.rx_clock = qe_clock_source(sprop);
- if ((ug_info->uf_info.rx_clock < QE_CLK_NONE) ||
- (ug_info->uf_info.rx_clock > QE_CLK24)) {
- pr_err("invalid rx-clock-name property\n");
- return -EINVAL;
- }
- } else {
- prop = of_get_property(np, "rx-clock", NULL);
- if (!prop) {
- /* If both rx-clock-name and rx-clock are missing,
- we want to tell people to use rx-clock-name. */
- pr_err("missing rx-clock-name property\n");
- return -EINVAL;
- }
- if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
- pr_err("invalid rx-clock property\n");
- return -EINVAL;
- }
- ug_info->uf_info.rx_clock = *prop;
- }
-
- sprop = of_get_property(np, "tx-clock-name", NULL);
- if (sprop) {
- ug_info->uf_info.tx_clock = qe_clock_source(sprop);
- if ((ug_info->uf_info.tx_clock < QE_CLK_NONE) ||
- (ug_info->uf_info.tx_clock > QE_CLK24)) {
- pr_err("invalid tx-clock-name property\n");
- return -EINVAL;
- }
- } else {
- prop = of_get_property(np, "tx-clock", NULL);
- if (!prop) {
- pr_err("missing tx-clock-name property\n");
- return -EINVAL;
- }
- if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
- pr_err("invalid tx-clock property\n");
- return -EINVAL;
- }
- ug_info->uf_info.tx_clock = *prop;
- }
+ err = ucc_geth_parse_clock(np, "rx", &ug_info->uf_info.rx_clock);
+ if (err)
+ return err;
+ err = ucc_geth_parse_clock(np, "tx", &ug_info->uf_info.tx_clock);
+ if (err)
+ return err;
err = of_address_to_resource(np, 0, &res);
if (err)
--
2.23.0
^ permalink raw reply related
* [PATCH 10/20] ethernet: ucc_geth: remove {rx, tx}_glbl_pram_offset from struct ucc_geth_private
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
These fields are only used within ucc_geth_startup(), so they might as
well be local variables in that function rather than being stashed in
struct ucc_geth_private.
Aside from making that struct a tiny bit smaller, it also shortens
some lines (getting rid of pointless casts while here), and fixes the
problems with using IS_ERR_VALUE() on a u32 as explained in commit
800cd6fb76f0 ("soc: fsl: qe: change return type of cpm_muram_alloc()
to s32").
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 21 +++++++++------------
drivers/net/ethernet/freescale/ucc_geth.h | 2 --
2 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index e1574c14b7e5..b132fcfc7c17 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2351,6 +2351,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
u8 function_code = 0;
u8 __iomem *endOfRing;
u8 numThreadsRxNumerical, numThreadsTxNumerical;
+ s32 rx_glbl_pram_offset, tx_glbl_pram_offset;
ugeth_vdbg("%s: IN", __func__);
uccf = ugeth->uccf;
@@ -2495,17 +2496,15 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
*/
/* Tx global PRAM */
/* Allocate global tx parameter RAM page */
- ugeth->tx_glbl_pram_offset =
+ tx_glbl_pram_offset =
qe_muram_alloc(sizeof(struct ucc_geth_tx_global_pram),
UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT);
- if (IS_ERR_VALUE(ugeth->tx_glbl_pram_offset)) {
+ if (tx_glbl_pram_offset < 0) {
if (netif_msg_ifup(ugeth))
pr_err("Can not allocate DPRAM memory for p_tx_glbl_pram\n");
return -ENOMEM;
}
- ugeth->p_tx_glbl_pram =
- (struct ucc_geth_tx_global_pram __iomem *) qe_muram_addr(ugeth->
- tx_glbl_pram_offset);
+ ugeth->p_tx_glbl_pram = qe_muram_addr(tx_glbl_pram_offset);
/* Fill global PRAM */
/* TQPTR */
@@ -2656,17 +2655,15 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
/* Rx global PRAM */
/* Allocate global rx parameter RAM page */
- ugeth->rx_glbl_pram_offset =
+ rx_glbl_pram_offset =
qe_muram_alloc(sizeof(struct ucc_geth_rx_global_pram),
UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT);
- if (IS_ERR_VALUE(ugeth->rx_glbl_pram_offset)) {
+ if (rx_glbl_pram_offset < 0) {
if (netif_msg_ifup(ugeth))
pr_err("Can not allocate DPRAM memory for p_rx_glbl_pram\n");
return -ENOMEM;
}
- ugeth->p_rx_glbl_pram =
- (struct ucc_geth_rx_global_pram __iomem *) qe_muram_addr(ugeth->
- rx_glbl_pram_offset);
+ ugeth->p_rx_glbl_pram = qe_muram_addr(rx_glbl_pram_offset);
/* Fill global PRAM */
/* RQPTR */
@@ -2928,7 +2925,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
((u32) ug_info->numThreadsTx) << ENET_INIT_PARAM_TGF_SHIFT;
ugeth->p_init_enet_param_shadow->rgftgfrxglobal |=
- ugeth->rx_glbl_pram_offset | ug_info->riscRx;
+ rx_glbl_pram_offset | ug_info->riscRx;
if ((ug_info->largestexternallookupkeysize !=
QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE) &&
(ug_info->largestexternallookupkeysize !=
@@ -2966,7 +2963,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
}
ugeth->p_init_enet_param_shadow->txglobal =
- ugeth->tx_glbl_pram_offset | ug_info->riscTx;
+ tx_glbl_pram_offset | ug_info->riscTx;
if ((ret_val =
fill_init_enet_entries(ugeth,
&(ugeth->p_init_enet_param_shadow->
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index c80bed2c995c..be47fa8ced15 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -1166,9 +1166,7 @@ struct ucc_geth_private {
struct ucc_geth_exf_global_pram __iomem *p_exf_glbl_param;
u32 exf_glbl_param_offset;
struct ucc_geth_rx_global_pram __iomem *p_rx_glbl_pram;
- u32 rx_glbl_pram_offset;
struct ucc_geth_tx_global_pram __iomem *p_tx_glbl_pram;
- u32 tx_glbl_pram_offset;
struct ucc_geth_send_queue_mem_region __iomem *p_send_q_mem_reg;
u32 send_q_mem_reg_offset;
struct ucc_geth_thread_data_tx __iomem *p_thread_data_tx;
--
2.23.0
^ permalink raw reply related
* [PATCH 09/20] ethernet: ucc_geth: replace kmalloc+memset by kzalloc
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index f854ff90f238..e1574c14b7e5 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2904,14 +2904,11 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
* allocated resources can be released when the channel is freed.
*/
if (!(ugeth->p_init_enet_param_shadow =
- kmalloc(sizeof(struct ucc_geth_init_pram), GFP_KERNEL))) {
+ kzalloc(sizeof(struct ucc_geth_init_pram), GFP_KERNEL))) {
if (netif_msg_ifup(ugeth))
pr_err("Can not allocate memory for p_UccInitEnetParamShadows\n");
return -ENOMEM;
}
- /* Zero out *p_init_enet_param_shadow */
- memset((char *)ugeth->p_init_enet_param_shadow,
- 0, sizeof(struct ucc_geth_init_pram));
/* Fill shadow InitEnet command parameter structure */
--
2.23.0
^ permalink raw reply related
* [PATCH 03/20] ethernet: ucc_geth: remove unused read of temoder field
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
In theory, such a read-after-write might be required by the hardware,
but nothing in the data sheet suggests that to be the case. The name
test also suggests that it's some debug leftover.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 380c1f09adaf..6446f2e562c9 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2359,7 +2359,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
u32 init_enet_pram_offset, cecr_subblock, command;
u32 ifstat, i, j, size, l2qt, l3qt;
u16 temoder = UCC_GETH_TEMODER_INIT;
- u16 test;
u8 function_code = 0;
u8 __iomem *endOfRing;
u8 numThreadsRxNumerical, numThreadsTxNumerical;
@@ -2667,8 +2666,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
temoder |= ((ug_info->numQueuesTx - 1) << TEMODER_NUM_OF_QUEUES_SHIFT);
out_be16(&ugeth->p_tx_glbl_pram->temoder, temoder);
- test = in_be16(&ugeth->p_tx_glbl_pram->temoder);
-
/* Function code register value to be used later */
function_code = UCC_BMR_BO_BE | UCC_BMR_GBL;
/* Required for QE */
--
2.23.0
^ permalink raw reply related
* [PATCH 08/20] ethernet: ucc_geth: remove unnecessary memset_io() calls
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
These buffers have all just been handed out from qe_muram_alloc(), aka
cpm_muram_alloc(), and the helper cpm_muram_alloc_common() already
does
memset_io(cpm_muram_addr(start), 0, size);
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index bbcdb77be9a8..f854ff90f238 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2506,9 +2506,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ugeth->p_tx_glbl_pram =
(struct ucc_geth_tx_global_pram __iomem *) qe_muram_addr(ugeth->
tx_glbl_pram_offset);
- /* Zero out p_tx_glbl_pram */
- memset_io((void __iomem *)ugeth->p_tx_glbl_pram, 0, sizeof(struct ucc_geth_tx_global_pram));
-
/* Fill global PRAM */
/* TQPTR */
@@ -2596,8 +2593,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
scheduler_offset);
out_be32(&ugeth->p_tx_glbl_pram->schedulerbasepointer,
ugeth->scheduler_offset);
- /* Zero out p_scheduler */
- memset_io((void __iomem *)ugeth->p_scheduler, 0, sizeof(struct ucc_geth_scheduler));
/* Set values in scheduler */
out_be32(&ugeth->p_scheduler->mblinterval,
@@ -2640,9 +2635,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ugeth->p_tx_fw_statistics_pram =
(struct ucc_geth_tx_firmware_statistics_pram __iomem *)
qe_muram_addr(ugeth->tx_fw_statistics_pram_offset);
- /* Zero out p_tx_fw_statistics_pram */
- memset_io((void __iomem *)ugeth->p_tx_fw_statistics_pram,
- 0, sizeof(struct ucc_geth_tx_firmware_statistics_pram));
}
/* temoder */
@@ -2675,9 +2667,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ugeth->p_rx_glbl_pram =
(struct ucc_geth_rx_global_pram __iomem *) qe_muram_addr(ugeth->
rx_glbl_pram_offset);
- /* Zero out p_rx_glbl_pram */
- memset_io((void __iomem *)ugeth->p_rx_glbl_pram, 0, sizeof(struct ucc_geth_rx_global_pram));
-
/* Fill global PRAM */
/* RQPTR */
@@ -2715,9 +2704,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
ugeth->p_rx_fw_statistics_pram =
(struct ucc_geth_rx_firmware_statistics_pram __iomem *)
qe_muram_addr(ugeth->rx_fw_statistics_pram_offset);
- /* Zero out p_rx_fw_statistics_pram */
- memset_io((void __iomem *)ugeth->p_rx_fw_statistics_pram, 0,
- sizeof(struct ucc_geth_rx_firmware_statistics_pram));
}
/* intCoalescingPtr */
@@ -2803,11 +2789,6 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
(struct ucc_geth_rx_bd_queues_entry __iomem *) qe_muram_addr(ugeth->
rx_bd_qs_tbl_offset);
out_be32(&ugeth->p_rx_glbl_pram->rbdqptr, ugeth->rx_bd_qs_tbl_offset);
- /* Zero out p_rx_bd_qs_tbl */
- memset_io((void __iomem *)ugeth->p_rx_bd_qs_tbl,
- 0,
- ug_info->numQueuesRx * (sizeof(struct ucc_geth_rx_bd_queues_entry) +
- sizeof(struct ucc_geth_rx_prefetched_bds)));
/* Setup the table */
/* Assume BD rings are already established */
--
2.23.0
^ permalink raw reply related
* [PATCH 07/20] ethernet: ucc_geth: use qe_muram_free_addr()
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
This removes the explicit NULL checks, and allows us to stop storing
at least some of the _offset values separately.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 77 ++++++++++-------------
1 file changed, 33 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 6446f2e562c9..bbcdb77be9a8 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1921,50 +1921,39 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth)
ugeth->uccf = NULL;
}
- if (ugeth->p_thread_data_tx) {
- qe_muram_free(ugeth->thread_dat_tx_offset);
- ugeth->p_thread_data_tx = NULL;
- }
- if (ugeth->p_thread_data_rx) {
- qe_muram_free(ugeth->thread_dat_rx_offset);
- ugeth->p_thread_data_rx = NULL;
- }
- if (ugeth->p_exf_glbl_param) {
- qe_muram_free(ugeth->exf_glbl_param_offset);
- ugeth->p_exf_glbl_param = NULL;
- }
- if (ugeth->p_rx_glbl_pram) {
- qe_muram_free(ugeth->rx_glbl_pram_offset);
- ugeth->p_rx_glbl_pram = NULL;
- }
- if (ugeth->p_tx_glbl_pram) {
- qe_muram_free(ugeth->tx_glbl_pram_offset);
- ugeth->p_tx_glbl_pram = NULL;
- }
- if (ugeth->p_send_q_mem_reg) {
- qe_muram_free(ugeth->send_q_mem_reg_offset);
- ugeth->p_send_q_mem_reg = NULL;
- }
- if (ugeth->p_scheduler) {
- qe_muram_free(ugeth->scheduler_offset);
- ugeth->p_scheduler = NULL;
- }
- if (ugeth->p_tx_fw_statistics_pram) {
- qe_muram_free(ugeth->tx_fw_statistics_pram_offset);
- ugeth->p_tx_fw_statistics_pram = NULL;
- }
- if (ugeth->p_rx_fw_statistics_pram) {
- qe_muram_free(ugeth->rx_fw_statistics_pram_offset);
- ugeth->p_rx_fw_statistics_pram = NULL;
- }
- if (ugeth->p_rx_irq_coalescing_tbl) {
- qe_muram_free(ugeth->rx_irq_coalescing_tbl_offset);
- ugeth->p_rx_irq_coalescing_tbl = NULL;
- }
- if (ugeth->p_rx_bd_qs_tbl) {
- qe_muram_free(ugeth->rx_bd_qs_tbl_offset);
- ugeth->p_rx_bd_qs_tbl = NULL;
- }
+ qe_muram_free_addr(ugeth->p_thread_data_tx);
+ ugeth->p_thread_data_tx = NULL;
+
+ qe_muram_free_addr(ugeth->p_thread_data_rx);
+ ugeth->p_thread_data_rx = NULL;
+
+ qe_muram_free_addr(ugeth->p_exf_glbl_param);
+ ugeth->p_exf_glbl_param = NULL;
+
+ qe_muram_free_addr(ugeth->p_rx_glbl_pram);
+ ugeth->p_rx_glbl_pram = NULL;
+
+ qe_muram_free_addr(ugeth->p_tx_glbl_pram);
+ ugeth->p_tx_glbl_pram = NULL;
+
+ qe_muram_free_addr(ugeth->p_send_q_mem_reg);
+ ugeth->p_send_q_mem_reg = NULL;
+
+ qe_muram_free_addr(ugeth->p_scheduler);
+ ugeth->p_scheduler = NULL;
+
+ qe_muram_free_addr(ugeth->p_tx_fw_statistics_pram);
+ ugeth->p_tx_fw_statistics_pram = NULL;
+
+ qe_muram_free_addr(ugeth->p_rx_fw_statistics_pram);
+ ugeth->p_rx_fw_statistics_pram = NULL;
+
+ qe_muram_free_addr(ugeth->p_rx_irq_coalescing_tbl);
+ ugeth->p_rx_irq_coalescing_tbl = NULL;
+
+ qe_muram_free_addr(ugeth->p_rx_bd_qs_tbl);
+ ugeth->p_rx_bd_qs_tbl = NULL;
+
if (ugeth->p_init_enet_param_shadow) {
return_init_enet_entries(ugeth,
&(ugeth->p_init_enet_param_shadow->
--
2.23.0
^ permalink raw reply related
* [PATCH 06/20] soc: fsl: qe: add cpm_muram_free_addr() helper
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Qiang Zhao, Li Yang
Cc: Vladimir Oltean, linuxppc-dev, linux-kernel, linux-arm-kernel,
Rasmus Villemoes
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Add a helper that takes a virtual address rather than the muram
offset. This will be used in a couple of places to avoid having to
store both the offset and the virtual address, as well as removing
NULL checks from the callers.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/soc/fsl/qe/qe_common.c | 12 ++++++++++++
include/soc/fsl/qe/qe.h | 5 +++++
2 files changed, 17 insertions(+)
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 303cc2f5eb4a..448ef7f5321a 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -238,3 +238,15 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
return muram_pbase + (addr - muram_vbase);
}
EXPORT_SYMBOL(cpm_muram_dma);
+
+/*
+ * As cpm_muram_free, but takes the virtual address rather than the
+ * muram offset.
+ */
+void cpm_muram_free_addr(const void __iomem *addr)
+{
+ if (!addr)
+ return;
+ cpm_muram_free(cpm_muram_offset(addr));
+}
+EXPORT_SYMBOL(cpm_muram_free_addr);
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 8ee3747433c0..66f1afc393d1 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -104,6 +104,7 @@ s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
unsigned long cpm_muram_offset(const void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
+void cpm_muram_free_addr(const void __iomem *addr);
#else
static inline s32 cpm_muram_alloc(unsigned long size,
unsigned long align)
@@ -135,6 +136,9 @@ static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
{
return 0;
}
+static inline void cpm_muram_free_addr(const void __iomem *addr)
+{
+}
#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
/* QE PIO */
@@ -239,6 +243,7 @@ static inline int qe_alive_during_sleep(void)
#define qe_muram_addr cpm_muram_addr
#define qe_muram_offset cpm_muram_offset
#define qe_muram_dma cpm_muram_dma
+#define qe_muram_free_addr cpm_muram_free_addr
#ifdef CONFIG_PPC32
#define qe_iowrite8(val, addr) out_8(addr, val)
--
2.23.0
^ permalink raw reply related
* [PATCH 04/20] soc: fsl: qe: make cpm_muram_offset take a const void* argument
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Qiang Zhao, Li Yang
Cc: Vladimir Oltean, linuxppc-dev, linux-kernel, linux-arm-kernel,
Rasmus Villemoes
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Allow passing const-qualified pointers without requiring a cast in the
caller.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/soc/fsl/qe/qe_common.c | 2 +-
include/soc/fsl/qe/qe.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 75075591f630..0fbdc965c4cb 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -223,7 +223,7 @@ void __iomem *cpm_muram_addr(unsigned long offset)
}
EXPORT_SYMBOL(cpm_muram_addr);
-unsigned long cpm_muram_offset(void __iomem *addr)
+unsigned long cpm_muram_offset(const void __iomem *addr)
{
return addr - (void __iomem *)muram_vbase;
}
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index 3feddfec9f87..8ee3747433c0 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -102,7 +102,7 @@ s32 cpm_muram_alloc(unsigned long size, unsigned long align);
void cpm_muram_free(s32 offset);
s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
+unsigned long cpm_muram_offset(const void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
#else
static inline s32 cpm_muram_alloc(unsigned long size,
@@ -126,7 +126,7 @@ static inline void __iomem *cpm_muram_addr(unsigned long offset)
return NULL;
}
-static inline unsigned long cpm_muram_offset(void __iomem *addr)
+static inline unsigned long cpm_muram_offset(const void __iomem *addr)
{
return -ENOSYS;
}
--
2.23.0
^ permalink raw reply related
* [PATCH 05/20] soc: fsl: qe: store muram_vbase as a void pointer instead of u8
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Qiang Zhao, Li Yang
Cc: Vladimir Oltean, linuxppc-dev, linux-kernel, linux-arm-kernel,
Rasmus Villemoes
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
The two functions cpm_muram_offset() and cpm_muram_dma() both need a
cast currently, one casts muram_vbase to do the pointer arithmetic on
void pointers, the other casts the the passed-in address u8*.
It's simpler and more consistent to just always use void* and drop all
the casting.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/soc/fsl/qe/qe_common.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 0fbdc965c4cb..303cc2f5eb4a 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -27,7 +27,7 @@
static struct gen_pool *muram_pool;
static spinlock_t cpm_muram_lock;
-static u8 __iomem *muram_vbase;
+static void __iomem *muram_vbase;
static phys_addr_t muram_pbase;
struct muram_block {
@@ -225,7 +225,7 @@ EXPORT_SYMBOL(cpm_muram_addr);
unsigned long cpm_muram_offset(const void __iomem *addr)
{
- return addr - (void __iomem *)muram_vbase;
+ return addr - muram_vbase;
}
EXPORT_SYMBOL(cpm_muram_offset);
@@ -235,6 +235,6 @@ EXPORT_SYMBOL(cpm_muram_offset);
*/
dma_addr_t cpm_muram_dma(void __iomem *addr)
{
- return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+ return muram_pbase + (addr - muram_vbase);
}
EXPORT_SYMBOL(cpm_muram_dma);
--
2.23.0
^ permalink raw reply related
* [PATCH 00/20] ethernet: ucc_geth: assorted fixes and simplifications
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski, Qiang Zhao, netdev,
linuxppc-dev, linux-kernel, linux-arm-kernel
Cc: Vladimir Oltean, Rasmus Villemoes
While trying to figure out how to allow bumping the MTU with the
ucc_geth driver, I fell into a rabbit hole and stumbled on a whole
bunch of issues of varying importance - some are outright bug fixes,
while most are a matter of simplifying the code to make it more
accessible.
At the end of digging around the code and data sheet to figure out how
it all works, I think the MTU issue might be fixed by a one-liner, but
I'm not sure it can be that simple. It does seem to work (ping -s X
works for larger values of X, and wireshark confirms that the packets
are not fragmented).
Re patch 2, someone in NXP should check how the hardware actually
works and make an updated reference manual available.
Rasmus Villemoes (20):
ethernet: ucc_geth: set dev->max_mtu to 1518
ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram
ethernet: ucc_geth: remove unused read of temoder field
soc: fsl: qe: make cpm_muram_offset take a const void* argument
soc: fsl: qe: store muram_vbase as a void pointer instead of u8
soc: fsl: qe: add cpm_muram_free_addr() helper
ethernet: ucc_geth: use qe_muram_free_addr()
ethernet: ucc_geth: remove unnecessary memset_io() calls
ethernet: ucc_geth: replace kmalloc+memset by kzalloc
ethernet: ucc_geth: remove {rx,tx}_glbl_pram_offset from struct
ucc_geth_private
ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()
ethernet: ucc_geth: factor out parsing of {rx,tx}-clock{,-name}
properties
ethernet: ucc_geth: constify ugeth_primary_info
ethernet: ucc_geth: don't statically allocate eight ucc_geth_info
ethernet: ucc_geth: use UCC_GETH_{RX,TX}_BD_RING_ALIGNMENT macros
directly
ethernet: ucc_geth: remove bd_mem_part and all associated code
ethernet: ucc_geth: replace kmalloc_array()+for loop by kcalloc()
ethernet: ucc_geth: add helper to replace repeated switch statements
ethernet: ucc_geth: inform the compiler that numQueues is always 1
ethernet: ucc_geth: simplify rx/tx allocations
drivers/net/ethernet/freescale/ucc_geth.c | 553 ++++++++--------------
drivers/net/ethernet/freescale/ucc_geth.h | 15 +-
drivers/soc/fsl/qe/qe_common.c | 20 +-
include/soc/fsl/qe/qe.h | 15 +-
include/soc/fsl/qe/ucc_fast.h | 1 -
5 files changed, 219 insertions(+), 385 deletions(-)
--
2.23.0
^ permalink raw reply
* [PATCH 02/20] ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski
Cc: Rasmus Villemoes, Vladimir Oltean, linux-kernel, netdev,
linuxppc-dev, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text
Base Address of the Global Transmitter Parameter RAM Page. [...]
The user needs to allocate 128 bytes for this page. The address must
be aligned to the page size.
I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).
Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).
I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index 3fe903972195..c80bed2c995c 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -575,7 +575,14 @@ struct ucc_geth_tx_global_pram {
u32 vtagtable[0x8]; /* 8 4-byte VLAN tags */
u32 tqptr; /* a base pointer to the Tx Queues Memory
Region */
- u8 res2[0x80 - 0x74];
+ u8 res2[0x78 - 0x74];
+ u64 snums_en;
+ u32 l2l3baseptr; /* top byte consists of a few other bit fields */
+
+ u16 mtu[8];
+ u8 res3[0xa8 - 0x94];
+ u32 wrrtablebase; /* top byte is reserved */
+ u8 res4[0xc0 - 0xac];
} __packed;
/* structure representing Extended Filtering Global Parameters in PRAM */
--
2.23.0
^ permalink raw reply related
* [PATCH 01/20] ethernet: ucc_geth: set dev->max_mtu to 1518
From: Rasmus Villemoes @ 2020-12-05 19:17 UTC (permalink / raw)
To: Li Yang, David S. Miller, Jakub Kicinski,
Murali Krishna Policharla, Florian Fainelli, Vladimir Oltean
Cc: netdev, Rasmus Villemoes, linuxppc-dev, linux-kernel, Zhao Qiang
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>
All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.
This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead
The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
drivers/net/ethernet/freescale/ucc_geth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 714b501be7d0..380c1f09adaf 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3889,6 +3889,7 @@ static int ucc_geth_probe(struct platform_device* ofdev)
INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64);
dev->mtu = 1500;
+ dev->max_mtu = 1518;
ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT);
ugeth->phy_interface = phy_interface;
--
2.23.0
^ permalink raw reply related
* Re: [PATCH 2/8] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Andy Lutomirski @ 2020-12-05 16:11 UTC (permalink / raw)
To: Nicholas Piggin
Cc: linux-arch, Arnd Bergmann, Peter Zijlstra, X86 ML, LKML, Linux-MM,
Mathieu Desnoyers, Andy Lutomirski, linuxppc-dev
In-Reply-To: <1607152918.fkgmomgfw9.astroid@bobo.none>
> On Dec 5, 2020, at 12:00 AM, Nicholas Piggin <npiggin@gmail.com> wrote:
>
>
> I disagree. Until now nobody following it noticed that the mm gets
> un-lazied in other cases, because that was not too clear from the
> code (only indirectly using non-standard terminology in the arch
> support document).
> In other words, membarrier needs a special sync to deal with the case
> when a kthread takes the mm.
I don’t think this is actually true. Somehow the x86 oddities about CR3 writes leaked too much into the membarrier core code and comments. (I doubt this is x86 specific. The actual x86 specific part seems to be that we can return to user mode without syncing the instruction stream.)
As far as I can tell, membarrier doesn’t care at all about laziness. Membarrier cares about rq->curr->mm. The fact that a cpu can switch its actual loaded mm without scheduling at all (on x86 at least) is entirely beside the point except insofar as it has an effect on whether a subsequent switch_mm() call serializes. If we notify membarrier about x86’s asynchronous CR3 writes, then membarrier needs to understand what to do with them, which results in an unmaintainable mess in membarrier *and* in the x86 code.
I’m currently trying to document how membarrier actually works, and hopefully this will result in untangling membarrier from mmdrop() and such.
A silly part of this is that x86 already has a high quality implementation of most of membarrier(): flush_tlb_mm(). If you flush an mm’s TLB, we carefully propagate the flush to all threads, with attention to memory ordering. We can’t use this directly as an arch-specific implementation of membarrier because it has the annoying side affect of flushing the TLB and because upcoming hardware might be able to flush without guaranteeing a core sync. (Upcoming means Zen 3, but the Zen 3 implementation is sadly not usable by Linux.)
^ permalink raw reply
* [PATCH v3 05/10] powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
From: Serge Semin @ 2020-12-05 15:56 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman, Michael Ellerman, Benjamin Herrenschmidt,
Paul Mackerras
Cc: Serge Semin, devicetree, linuxppc-dev, linux-kernel, Serge Semin
In-Reply-To: <20201205155621.3045-1-Sergey.Semin@baikalelectronics.ru>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
index df18f8dc4642..343326c30380 100644
--- a/arch/powerpc/boot/dts/akebono.dts
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
interrupts = <93 2>;
};
- EHCI0: ehci@30010000000 {
+ EHCI0: usb@30010000000 {
compatible = "ibm,476gtr-ehci", "generic-ehci";
reg = <0x300 0x10000000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
@@ -140,14 +140,14 @@ SD0: sd@30000000000 {
interrupt-parent = <&MPIC>;
};
- OHCI0: ohci@30010010000 {
+ OHCI0: usb@30010010000 {
compatible = "ibm,476gtr-ohci", "generic-ohci";
reg = <0x300 0x10010000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
interrupts = <89 1>;
};
- OHCI1: ohci@30010020000 {
+ OHCI1: usb@30010020000 {
compatible = "ibm,476gtr-ohci", "generic-ohci";
reg = <0x300 0x10020000 0x0 0x10000>;
interrupt-parent = <&MPIC>;
--
2.29.2
^ permalink raw reply related
* [PATCH RESEND v3 00/10] dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name
From: Serge Semin @ 2020-12-05 15:56 UTC (permalink / raw)
To: Felipe Balbi, Krzysztof Kozlowski, Florian Fainelli, Rob Herring,
Greg Kroah-Hartman
Cc: Andrew Lunn, Amelie Delaunay, Tony Lindgren, Bjorn Andersson,
Paul Cercueil, Paul Mackerras, linux-stm32, linux-kernel,
Alexandre Torgue, Khuong Dinh, linux-samsung-soc, Gregory Clement,
Rafal Milecki, Alexey Brodkin, Wei Xu, Chen-Yu Tsai, Andy Gross,
bcm-kernel-feedback-list, linux-arm-msm, linux-snps-arc,
Sebastian Hesselbarth, devicetree, Jason Cooper, Hauke Mehrtens,
linuxppc-dev, Maxime Ripard, Vladimir Zapolskiy, Jun Li,
Santosh Shilimkar, Matthias Brugger, Benoit Cousson, linux-omap,
linux-arm-kernel, Thomas Bogendoerfer, linux-mips, Vineet Gupta,
Patrice Chotard, Serge Semin, Li Yang, Serge Semin, Kukjin Kim,
Maxime Coquelin, linux-mediatek, Shawn Guo
As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.
Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.
Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.
Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.
[1] Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@baikalelectronics.ru/
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
node names had been also updated in all the depended dts files. As a
result I found two more files which should have been also modified:
arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.
Link: https://lore.kernel.org/linux-usb/20201020115959.2658-1-Sergey.Semin@baikalelectronics.ru
Changelog v2:
- Drop the patch:
[PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
and get back the one which marks the "synopsys,dwc3" compatible string
as deprecated into the DT schema related series.
- Drop the patches:
[PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
[PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
[PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
[PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
[PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
[PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
[PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
[PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
sub-node and falling back to the "dwc3@"-prefixed one on failure.
Link: https://lore.kernel.org/linux-usb/20201111091552.15593-1-Sergey.Semin@baikalelectronics.ru
Changelog v3:
- Drop the patches:
[PATCH v2 04/18] arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 06/18] arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 07/18] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 08/18] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 09/18] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 11/18] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
[PATCH v2 12/18] arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
[PATCH v2 16/18] arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Serge Semin (10):
arm: dts: keystone: Correct DWC USB3 compatible string
arm64: dts: amlogic: meson-g12: Set FL-adj property value
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
arm: dts: keystone: Harmonize DWC USB3 DT nodes name
arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
arm64: dts: apm: Harmonize DWC USB3 DT nodes name
usb: dwc3: qcom: Detect DWC3 DT-nodes with "usb"-prefixed names
arm64: dts: qcom: Harmonize DWC USB3 DT nodes name
arch/arc/boot/dts/axc003.dtsi | 4 ++--
arch/arc/boot/dts/axc003_idu.dtsi | 4 ++--
arch/arc/boot/dts/axs10x_mb.dtsi | 4 ++--
arch/arc/boot/dts/hsdk.dts | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2e.dtsi | 6 +++---
arch/arm/boot/dts/keystone.dtsi | 4 ++--
arch/arm/boot/dts/lpc18xx.dtsi | 4 ++--
arch/arm/boot/dts/stih407-family.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/powerpc/boot/dts/akebono.dts | 6 +++---
drivers/usb/dwc3/dwc3-qcom.c | 3 ++-
23 files changed, 42 insertions(+), 41 deletions(-)
--
2.29.2
^ permalink raw reply
* [PATCH v5 19/19] dt-bindings: usb: intel, keembay-dwc3: Validate DWC3 sub-node
From: Serge Semin @ 2020-12-05 15:24 UTC (permalink / raw)
To: Mathias Nyman, Felipe Balbi, Krzysztof Kozlowski,
Greg Kroah-Hartman, Rob Herring, Chunfeng Yun, Ahmad Zainie
Cc: devicetree, linux-snps-arc, linux-mips, Neil Armstrong,
Martin Blumenstingl, Kevin Hilman, Yoshihiro Shimoda, linux-usb,
linux-kernel, Lad Prabhakar, Serge Semin, Bjorn Andersson,
Serge Semin, Manu Gautam, Andy Gross, Pavel Parkhomenko,
Alexey Malahov, linuxppc-dev, linux-arm-kernel, Roger Quadros
In-Reply-To: <20201205152427.29537-1-Sergey.Semin@baikalelectronics.ru>
Intel Keem Bay DWC3 compatible DT nodes are supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface. Let's
use the available DWC USB3 DT schema to validate the Qualcomm DWC3
sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be named as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
Changelog v5:
- This is a new patch created for the new Intel Keem Bay bindings file,
which has been added just recently.
---
.../devicetree/bindings/usb/intel,keembay-dwc3.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
index dd32c10ce6c7..43b91ab62004 100644
--- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -34,11 +34,8 @@ properties:
# Required child node:
patternProperties:
- "^dwc3@[0-9a-f]+$":
- type: object
- description:
- A child node must exist to represent the core DWC3 IP block.
- The content of the node is defined in dwc3.txt.
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
required:
- compatible
@@ -68,7 +65,7 @@ examples:
#address-cells = <1>;
#size-cells = <1>;
- dwc3@34000000 {
+ usb@34000000 {
compatible = "snps,dwc3";
reg = <0x34000000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
--
2.29.2
^ permalink raw reply related
* [PATCH v5 18/19] dt-bindings: usb: qcom,dwc3: Validate DWC3 sub-node
From: Serge Semin @ 2020-12-05 15:24 UTC (permalink / raw)
To: Mathias Nyman, Felipe Balbi, Krzysztof Kozlowski,
Greg Kroah-Hartman, Rob Herring, Chunfeng Yun, Andy Gross,
Bjorn Andersson, Manu Gautam
Cc: devicetree, linux-snps-arc, linux-mips, Neil Armstrong,
Martin Blumenstingl, Kevin Hilman, Yoshihiro Shimoda, linux-usb,
linux-kernel, Lad Prabhakar, Serge Semin, Alexey Malahov,
Serge Semin, Pavel Parkhomenko, linux-arm-msm, Ahmad Zainie,
linuxppc-dev, Rob Herring, linux-arm-kernel, Roger Quadros
In-Reply-To: <20201205152427.29537-1-Sergey.Semin@baikalelectronics.ru>
Qualcomm msm8996/sc7180/sdm845 DWC3 compatible DT nodes are supposed to
have a DWC USB3 compatible sub-node to describe a fully functioning USB
interface. Let's use the available DWC USB3 DT schema to validate the
Qualcomm DWC3 sub-nodes.
Note since the generic DWC USB3 DT node is supposed to be named as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changelog v2:
- Discard the "^dwc3@[0-9a-f]+$" nodes from being acceptable as sub-nodes.
---
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 2cf525d21e05..b336662e838c 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -103,11 +103,8 @@ properties:
# Required child node:
patternProperties:
- "^dwc3@[0-9a-f]+$":
- type: object
- description:
- A child node must exist to represent the core DWC3 IP block
- The content of the node is defined in dwc3.txt.
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
required:
- compatible
@@ -162,7 +159,7 @@ examples:
resets = <&gcc GCC_USB30_PRIM_BCR>;
- dwc3@a600000 {
+ usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--
2.29.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox