* Re: [GIT PULL] Please pull powerpc/linux.git powerpc-5.10-6 tag
From: pr-tracker-bot @ 2020-12-11 0:40 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev, Linus Torvalds, linux-kernel
In-Reply-To: <878sa5rxx4.fsf@mpe.ellerman.id.au>
The pull request you sent on Fri, 11 Dec 2020 11:25:43 +1100:
> https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git tags/powerpc-5.10-6
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/47003b9971cc7c38737f21e07034502ca35ab7af
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html
^ permalink raw reply
* [GIT PULL] Please pull powerpc/linux.git powerpc-5.10-6 tag
From: Michael Ellerman @ 2020-12-11 0:25 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linuxppc-dev, linux-kernel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Hi Linus,
Please pull one final powerpc fix for 5.10:
The following changes since commit a1ee28117077c3bf24e5ab6324c835eaab629c45:
powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE (2020-12-02 23:16:40 +1100)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git tags/powerpc-5.10-6
for you to fetch changes up to 5eedf9fe8db23313df104576845cec5f481b9b60:
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed() (2020-12-08 10:22:09 +1100)
- ------------------------------------------------------------------
powerpc fixes for 5.10 #6
One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad addresses in
some configurations.
Thanks to:
Christophe Leroy, Qian Cai.
- ------------------------------------------------------------------
Christophe Leroy (1):
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
arch/powerpc/mm/Makefile | 2 +-
arch/powerpc/mm/maccess.c | 9 +++++++++
2 files changed, 10 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/mm/maccess.c
-----BEGIN PGP SIGNATURE-----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=g55c
-----END PGP SIGNATURE-----
^ permalink raw reply
* Re: [PATCH 2/8] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode
From: Andy Lutomirski @ 2020-12-11 0:11 UTC (permalink / raw)
To: Nicholas Piggin
Cc: linux-arch, Arnd Bergmann, Peter Zijlstra, X86 ML, LKML, Linux-MM,
Mathieu Desnoyers, Andy Lutomirski, linuxppc-dev
In-Reply-To: <1607224014.8xeujbleij.astroid@bobo.none>
> On Dec 5, 2020, at 7:59 PM, Nicholas Piggin <npiggin@gmail.com> wrote:
>
> I'm still going to persue shoot-lazies for the merge window. As you
> see it's about a dozen lines and a if (IS_ENABLED(... in core code.
> Your change is common code, but a significant complexity (which
> affects all archs) so needs a lot more review and testing at this
> point.
I don't think it's ready for this merge window. I read the early
patches again, and I think they make the membarrier code worse, not
better. I'm not fundamentally opposed to the shoot-lazies concept,
but it needs more thought and it needs a cleaner foundation.
^ permalink raw reply
* Re: [PATCH v2 07/13] powerpc: Increase NR_IRQS range to support more KVM guests
From: Michael Ellerman @ 2020-12-10 23:51 UTC (permalink / raw)
To: Cédric Le Goater, linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-8-clg@kaod.org>
Cédric Le Goater <clg@kaod.org> writes:
> PowerNV systems can handle up to 4K guests and 1M interrupt numbers
> per chip. Increase the range of allowed interrupts to support a larger
> number of guests.
>
> Reviewed-by: Greg Kurz <groug@kaod.org>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
> arch/powerpc/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 5181872f9452..c250fbd430d1 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -66,7 +66,7 @@ config NEED_PER_CPU_PAGE_FIRST_CHUNK
>
> config NR_IRQS
> int "Number of virtual interrupt numbers"
> - range 32 32768
> + range 32 1048576
> default "512"
> help
> This defines the number of virtual interrupt numbers the kernel
We should really do what other arches do, and size this appropriately
based on the config, rather than asking users to guess what size they
need.
But I guess I'll take this for now, and we can do something fancier
later.
cheers
^ permalink raw reply
* Re: linux-next: build warning after merge of the akpm tree
From: Stephen Rothwell @ 2020-12-10 21:17 UTC (permalink / raw)
To: Michael Ellerman
Cc: Kees Cook, Mathieu Malaterre, Linux Kernel Mailing List,
Nicholas Piggin, Linux Next Mailing List, Andrew Morton, PowerPC
In-Reply-To: <87im9aseam.fsf@mpe.ellerman.id.au>
[-- Attachment #1: Type: text/plain, Size: 719 bytes --]
Hi Michael,
On Thu, 10 Dec 2020 11:19:45 +1100 Michael Ellerman <mpe@ellerman.id.au> wrote:
>
> Stephen Rothwell <sfr@canb.auug.org.au> writes:
> >
> > On Wed, 09 Dec 2020 15:44:35 +1100 Michael Ellerman <mpe@ellerman.id.au> wrote:
> >>
> >> They should really be in DATA_DATA or similar shouldn't they?
> >
> > No other architecture appears t need them ...
>
> Any arch with orphan-handling=warn should see them I thought?
I did an x86_64 allyesconfig build (same compiler (more or less) and
same source) and it produces none of these sections. The only
difference in UBSAN CONFIG_ options was that CONFIG_UBSAN_UNREACHABLE
is not set in the x86_64 build.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH v6 0/5] PCI: Unify ECAM constants in native PCI Express drivers
From: Michael Walle @ 2020-12-10 19:58 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: kw, heiko, shawn.lin, Alexandru Marginean, paulus,
thomas.petazzoni, jonnyc, toan, will, robh, lorenzo.pieralisi,
michal.simek, linux-rockchip, bcm-kernel-feedback-list,
linux-arm-kernel, linux-pci, rjui, f.fainelli, linux-rpi-kernel,
Jonathan.Cameron, bhelgaas, jonathan.derrick, sbranden, wangzhou1,
rrichter, Vladimir Oltean, linuxppc-dev, nsaenzjulienne
In-Reply-To: <20201210173809.GA37355@bjorn-Precision-5520>
Am 2020-12-10 18:38, schrieb Bjorn Helgaas:
> On Wed, Dec 09, 2020 at 10:29:04PM +0200, Vladimir Oltean wrote:
>> On Wed, Dec 09, 2020 at 04:40:52PM +0100, Michael Walle wrote:
>> > Hopefully my mail client won't mess up the output that much.
>>
>> I can reproduce on my LS1028A as well. The following fixes the bug for
>> me. I did not follow the discussion and see if it is helpful for
>> others.
>> I don't understand how the bug came to be. There might be more to it
>> than what I'm seeing. If it's just what I'm seeing, then the patch was
>> pretty broken to begin with.
>
> I squashed the fix below into a pci/ecam branch for v5.11, thanks!
FWIW
Tested-by: Michael Walle <michael@walle.cc>
-michael
^ permalink raw reply
* Re: [PATCH v6 0/5] PCI: Unify ECAM constants in native PCI Express drivers
From: Bjorn Helgaas @ 2020-12-10 17:38 UTC (permalink / raw)
To: Vladimir Oltean
Cc: kw, heiko, shawn.lin, Alexandru Marginean, paulus,
thomas.petazzoni, jonnyc, toan, will, robh, lorenzo.pieralisi,
michal.simek, linux-rockchip, bcm-kernel-feedback-list,
linux-arm-kernel, linux-pci, rjui, f.fainelli, linux-rpi-kernel,
Jonathan.Cameron, bhelgaas, jonathan.derrick, sbranden, wangzhou1,
Michael Walle, rrichter, linuxppc-dev, nsaenzjulienne
In-Reply-To: <20201209202904.2juzokqhleusgsts@skbuf>
On Wed, Dec 09, 2020 at 10:29:04PM +0200, Vladimir Oltean wrote:
> On Wed, Dec 09, 2020 at 04:40:52PM +0100, Michael Walle wrote:
> > Hopefully my mail client won't mess up the output that much.
>
> I can reproduce on my LS1028A as well. The following fixes the bug for
> me. I did not follow the discussion and see if it is helpful for others.
> I don't understand how the bug came to be. There might be more to it
> than what I'm seeing. If it's just what I'm seeing, then the patch was
> pretty broken to begin with.
I squashed the fix below into a pci/ecam branch for v5.11, thanks!
> -----------------------------[cut here]-----------------------------
> From b184da4088c9d39d25fee2486941cdf77688a409 Mon Sep 17 00:00:00 2001
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> Date: Wed, 9 Dec 2020 22:17:32 +0200
> Subject: [PATCH] PCI: fix invalid window size for the ECAM config space
>
> The blamed commit forgot that pci_ecam_create() calculates the size of
> the window for the ECAM's config space based on the spacing between two
> buses. The drivers whose .bus_shift from struct pci_ecam_ops was changed
> to zero in this commit are now using this invalid value for bus_shift
> in calculating the window size.
>
> Before (broken):
> pci_ecam_create: remapping config space from addr 0x1f0000000, bus_range 0x1, bsz 0x1
> After (fixed/restored):
> pci_ecam_create: remapping config space from addr 0x1f0000000, bus_range 0x1, bsz 0x100000
>
> Fixes: f3c07cf6924e ("PCI: Unify ECAM constants in native PCI Express drivers")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> drivers/pci/ecam.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
> index 59f91d434859..9fda0d49bc93 100644
> --- a/drivers/pci/ecam.c
> +++ b/drivers/pci/ecam.c
> @@ -28,11 +28,19 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
> struct resource *cfgres, struct resource *busr,
> const struct pci_ecam_ops *ops)
> {
> + unsigned int bus_shift = ops->bus_shift;
> struct pci_config_window *cfg;
> unsigned int bus_range, bus_range_max, bsz;
> struct resource *conflict;
> int i, err;
>
> + /*
> + * struct pci_ecam_ops may omit specifying bus_shift
> + * if it is as per spec
> + */
> + if (!bus_shift)
> + bus_shift = PCIE_ECAM_BUS_SHIFT;
> +
> if (busr->start > busr->end)
> return ERR_PTR(-EINVAL);
>
> @@ -46,14 +54,14 @@ struct pci_config_window *pci_ecam_create(struct device *dev,
> cfg->busr.end = busr->end;
> cfg->busr.flags = IORESOURCE_BUS;
> bus_range = resource_size(&cfg->busr);
> - bus_range_max = resource_size(cfgres) >> ops->bus_shift;
> + bus_range_max = resource_size(cfgres) >> bus_shift;
> if (bus_range > bus_range_max) {
> bus_range = bus_range_max;
> cfg->busr.end = busr->start + bus_range - 1;
> dev_warn(dev, "ECAM area %pR can only accommodate %pR (reduced from %pR desired)\n",
> cfgres, &cfg->busr, busr);
> }
> - bsz = 1 << ops->bus_shift;
> + bsz = 1 << bus_shift;
>
> cfg->res.start = cfgres->start;
> cfg->res.end = cfgres->end;
> -----------------------------[cut here]-----------------------------
^ permalink raw reply
* [PATCH v2 02/13] powerpc/xive: Rename XIVE_IRQ_NO_EOI to show its a flag
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
This is a simple cleanup to identify easily all flags of the XIVE
interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI
are the escalations used to wake up vCPUs in KVM. They are handled
very differently from the rest.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/include/asm/xive.h | 2 +-
arch/powerpc/kvm/book3s_xive.c | 4 ++--
arch/powerpc/sysdev/xive/common.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 309b4d65b74f..d332dd9a18de 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -66,7 +66,7 @@ struct xive_irq_data {
#define XIVE_IRQ_FLAG_H_INT_ESB 0x20
/* Special flag set by KVM for excalation interrupts */
-#define XIVE_IRQ_NO_EOI 0x80
+#define XIVE_IRQ_FLAG_NO_EOI 0x80
#define XIVE_INVALID_CHIP_ID -1
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index 18a6b75a3bfd..fae1c2e8da29 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -219,7 +219,7 @@ int kvmppc_xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio,
/* In single escalation mode, we grab the ESB MMIO of the
* interrupt and mask it. Also populate the VCPU v/raddr
* of the ESB page for use by asm entry/exit code. Finally
- * set the XIVE_IRQ_NO_EOI flag which will prevent the
+ * set the XIVE_IRQ_FLAG_NO_EOI flag which will prevent the
* core code from performing an EOI on the escalation
* interrupt, thus leaving it effectively masked after
* it fires once.
@@ -231,7 +231,7 @@ int kvmppc_xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio,
xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
vcpu->arch.xive_esc_raddr = xd->eoi_page;
vcpu->arch.xive_esc_vaddr = (__force u64)xd->eoi_mmio;
- xd->flags |= XIVE_IRQ_NO_EOI;
+ xd->flags |= XIVE_IRQ_FLAG_NO_EOI;
}
return 0;
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index a80440af491a..65af34ac1fa2 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -416,7 +416,7 @@ static void xive_irq_eoi(struct irq_data *d)
* been passed-through to a KVM guest
*/
if (!irqd_irq_disabled(d) && !irqd_is_forwarded_to_vcpu(d) &&
- !(xd->flags & XIVE_IRQ_NO_EOI))
+ !(xd->flags & XIVE_IRQ_FLAG_NO_EOI))
xive_do_source_eoi(irqd_to_hwirq(d), xd);
else
xd->stale_p = true;
--
2.26.2
^ permalink raw reply related
* [PATCH v2 07/13] powerpc: Increase NR_IRQS range to support more KVM guests
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
PowerNV systems can handle up to 4K guests and 1M interrupt numbers
per chip. Increase the range of allowed interrupts to support a larger
number of guests.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5181872f9452..c250fbd430d1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -66,7 +66,7 @@ config NEED_PER_CPU_PAGE_FIRST_CHUNK
config NR_IRQS
int "Number of virtual interrupt numbers"
- range 32 32768
+ range 32 1048576
default "512"
help
This defines the number of virtual interrupt numbers the kernel
--
2.26.2
^ permalink raw reply related
* [PATCH v2 08/13] powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
This flag was used to support the PHB4 LSIs on P9 DD1 and we have
stopped supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/include/asm/opal-api.h | 2 +-
arch/powerpc/include/asm/xive.h | 2 +-
arch/powerpc/kvm/book3s_xive_native.c | 3 ---
arch/powerpc/kvm/book3s_xive_template.c | 3 ---
arch/powerpc/sysdev/xive/common.c | 9 ---------
arch/powerpc/sysdev/xive/native.c | 2 --
6 files changed, 2 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 1dffa3cb16ba..48ee604ca39a 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -1091,7 +1091,7 @@ enum {
OPAL_XIVE_IRQ_TRIGGER_PAGE = 0x00000001,
OPAL_XIVE_IRQ_STORE_EOI = 0x00000002,
OPAL_XIVE_IRQ_LSI = 0x00000004,
- OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008,
+ OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008, /* P9 DD1.0 workaround */
OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010,
OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020,
};
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index d332dd9a18de..b3c039d0bb6e 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -60,7 +60,7 @@ struct xive_irq_data {
};
#define XIVE_IRQ_FLAG_STORE_EOI 0x01
#define XIVE_IRQ_FLAG_LSI 0x02
-#define XIVE_IRQ_FLAG_SHIFT_BUG 0x04
+/* #define XIVE_IRQ_FLAG_SHIFT_BUG 0x04 */ /* P9 DD1.0 workaround */
#define XIVE_IRQ_FLAG_MASK_FW 0x08
#define XIVE_IRQ_FLAG_EOI_FW 0x10
#define XIVE_IRQ_FLAG_H_INT_ESB 0x20
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index 9b395381179d..170d1d04e1d1 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -37,9 +37,6 @@ static u8 xive_vm_esb_load(struct xive_irq_data *xd, u32 offset)
* ordering.
*/
- if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
- offset |= offset << 4;
-
val = in_be64(xd->eoi_mmio + offset);
return (u8)val;
}
diff --git a/arch/powerpc/kvm/book3s_xive_template.c b/arch/powerpc/kvm/book3s_xive_template.c
index 4ad3c0279458..ece36e024a8f 100644
--- a/arch/powerpc/kvm/book3s_xive_template.c
+++ b/arch/powerpc/kvm/book3s_xive_template.c
@@ -61,9 +61,6 @@ static u8 GLUE(X_PFX,esb_load)(struct xive_irq_data *xd, u32 offset)
if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
offset |= XIVE_ESB_LD_ST_MO;
- if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
- offset |= offset << 4;
-
val =__x_readq(__x_eoi_page(xd) + offset);
#ifdef __LITTLE_ENDIAN__
val >>= 64-8;
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 348445ffa0af..7b6e3149f1ea 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -200,10 +200,6 @@ static notrace u8 xive_esb_read(struct xive_irq_data *xd, u32 offset)
if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
offset |= XIVE_ESB_LD_ST_MO;
- /* Handle HW errata */
- if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
- offset |= offset << 4;
-
if ((xd->flags & XIVE_IRQ_FLAG_H_INT_ESB) && xive_ops->esb_rw)
val = xive_ops->esb_rw(xd->hw_irq, offset, 0, 0);
else
@@ -214,10 +210,6 @@ static notrace u8 xive_esb_read(struct xive_irq_data *xd, u32 offset)
static void xive_esb_write(struct xive_irq_data *xd, u32 offset, u64 data)
{
- /* Handle HW errata */
- if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
- offset |= offset << 4;
-
if ((xd->flags & XIVE_IRQ_FLAG_H_INT_ESB) && xive_ops->esb_rw)
xive_ops->esb_rw(xd->hw_irq, offset, data, 1);
else
@@ -1312,7 +1304,6 @@ static const struct {
} xive_irq_flags[] = {
{ XIVE_IRQ_FLAG_STORE_EOI, "STORE_EOI" },
{ XIVE_IRQ_FLAG_LSI, "LSI" },
- { XIVE_IRQ_FLAG_SHIFT_BUG, "SHIFT_BUG" },
{ XIVE_IRQ_FLAG_MASK_FW, "MASK_FW" },
{ XIVE_IRQ_FLAG_EOI_FW, "EOI_FW" },
{ XIVE_IRQ_FLAG_H_INT_ESB, "H_INT_ESB" },
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index c3182ec9ed65..f501b1640068 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -64,8 +64,6 @@ int xive_native_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
data->flags |= XIVE_IRQ_FLAG_STORE_EOI;
if (opal_flags & OPAL_XIVE_IRQ_LSI)
data->flags |= XIVE_IRQ_FLAG_LSI;
- if (opal_flags & OPAL_XIVE_IRQ_SHIFT_BUG)
- data->flags |= XIVE_IRQ_FLAG_SHIFT_BUG;
if (opal_flags & OPAL_XIVE_IRQ_MASK_VIA_FW)
data->flags |= XIVE_IRQ_FLAG_MASK_FW;
if (opal_flags & OPAL_XIVE_IRQ_EOI_VIA_FW)
--
2.26.2
^ permalink raw reply related
* [PATCH v2 13/13] KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
When the XIVE resources are allocated at the HW level, the VP
structures describing the vCPUs of a guest are distributed among
the chips to optimize the PowerBUS usage. For best performance, the
guest vCPUs can be pinned to match the VP structure distribution.
Currently, the VP identifiers are deduced from the vCPU id using
the kvmppc_pack_vcpu_id() routine which is not incorrect but not
optimal either. It VSMT is used, the result is not continuous and
the constraints on HW resources described above can not be met.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/kvm/book3s_xive.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/powerpc/kvm/book3s_xive.h b/arch/powerpc/kvm/book3s_xive.h
index d5d4fee7ac94..86c24a4ad809 100644
--- a/arch/powerpc/kvm/book3s_xive.h
+++ b/arch/powerpc/kvm/book3s_xive.h
@@ -218,6 +218,17 @@ static inline struct kvmppc_xive_src_block *kvmppc_xive_find_source(struct kvmpp
return xive->src_blocks[bid];
}
+/*
+ * When the XIVE resources are allocated at the HW level, the VP
+ * structures describing the vCPUs of a guest are distributed among
+ * the chips to optimize the PowerBUS usage. For best performance, the
+ * guest vCPUs can be pinned to match the VP structure distribution.
+ *
+ * Currently, the VP identifiers are deduced from the vCPU id using
+ * the kvmppc_pack_vcpu_id() routine which is not incorrect but not
+ * optimal either. It VSMT is used, the result is not continuous and
+ * the constraints on HW resources described above can not be met.
+ */
static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server)
{
return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
--
2.26.2
^ permalink raw reply related
* [PATCH v2 09/13] powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
This flag was used to support the PHB4 LSIs on P9 DD1 and we have
stopped supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/include/asm/opal-api.h | 2 +-
arch/powerpc/include/asm/xive.h | 2 +-
arch/powerpc/kvm/book3s_xive.c | 54 +++++------------------------
arch/powerpc/sysdev/xive/common.c | 40 +--------------------
arch/powerpc/sysdev/xive/native.c | 2 --
5 files changed, 11 insertions(+), 89 deletions(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 48ee604ca39a..0455b679c050 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -1092,7 +1092,7 @@ enum {
OPAL_XIVE_IRQ_STORE_EOI = 0x00000002,
OPAL_XIVE_IRQ_LSI = 0x00000004,
OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008, /* P9 DD1.0 workaround */
- OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010,
+ OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010, /* P9 DD1.0 workaround */
OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020,
};
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index b3c039d0bb6e..8d5b0dcc253c 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -61,7 +61,7 @@ struct xive_irq_data {
#define XIVE_IRQ_FLAG_STORE_EOI 0x01
#define XIVE_IRQ_FLAG_LSI 0x02
/* #define XIVE_IRQ_FLAG_SHIFT_BUG 0x04 */ /* P9 DD1.0 workaround */
-#define XIVE_IRQ_FLAG_MASK_FW 0x08
+/* #define XIVE_IRQ_FLAG_MASK_FW 0x08 */ /* P9 DD1.0 workaround */
#define XIVE_IRQ_FLAG_EOI_FW 0x10
#define XIVE_IRQ_FLAG_H_INT_ESB 0x20
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index fae1c2e8da29..30dfeac731c6 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -419,37 +419,16 @@ static u8 xive_lock_and_mask(struct kvmppc_xive *xive,
/* Get the right irq */
kvmppc_xive_select_irq(state, &hw_num, &xd);
+ /* Set PQ to 10, return old P and old Q and remember them */
+ val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_10);
+ state->old_p = !!(val & 2);
+ state->old_q = !!(val & 1);
+
/*
- * If the interrupt is marked as needing masking via
- * firmware, we do it here. Firmware masking however
- * is "lossy", it won't return the old p and q bits
- * and won't set the interrupt to a state where it will
- * record queued ones. If this is an issue we should do
- * lazy masking instead.
- *
- * For now, we work around this in unmask by forcing
- * an interrupt whenever we unmask a non-LSI via FW
- * (if ever).
+ * Synchronize hardware to sensure the queues are updated when
+ * masking
*/
- if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
- xive_native_configure_irq(hw_num,
- kvmppc_xive_vp(xive, state->act_server),
- MASKED, state->number);
- /* set old_p so we can track if an H_EOI was done */
- state->old_p = true;
- state->old_q = false;
- } else {
- /* Set PQ to 10, return old P and old Q and remember them */
- val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_10);
- state->old_p = !!(val & 2);
- state->old_q = !!(val & 1);
-
- /*
- * Synchronize hardware to sensure the queues are updated
- * when masking
- */
- xive_native_sync_source(hw_num);
- }
+ xive_native_sync_source(hw_num);
return old_prio;
}
@@ -483,23 +462,6 @@ static void xive_finish_unmask(struct kvmppc_xive *xive,
/* Get the right irq */
kvmppc_xive_select_irq(state, &hw_num, &xd);
- /*
- * See comment in xive_lock_and_mask() concerning masking
- * via firmware.
- */
- if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
- xive_native_configure_irq(hw_num,
- kvmppc_xive_vp(xive, state->act_server),
- state->act_priority, state->number);
- /* If an EOI is needed, do it here */
- if (!state->old_p)
- xive_vm_source_eoi(hw_num, xd);
- /* If this is not an LSI, force a trigger */
- if (!(xd->flags & OPAL_XIVE_IRQ_LSI))
- xive_irq_trigger(xd);
- goto bail;
- }
-
/* Old Q set, set PQ to 11 */
if (state->old_q)
xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_11);
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 7b6e3149f1ea..b240eb698920 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -424,9 +424,7 @@ static void xive_irq_eoi(struct irq_data *d)
}
/*
- * Helper used to mask and unmask an interrupt source. This
- * is only called for normal interrupts that do not require
- * masking/unmasking via firmware.
+ * Helper used to mask and unmask an interrupt source.
*/
static void xive_do_source_set_mask(struct xive_irq_data *xd,
bool mask)
@@ -673,20 +671,6 @@ static void xive_irq_unmask(struct irq_data *d)
pr_devel("xive_irq_unmask: irq %d data @%p\n", d->irq, xd);
- /*
- * This is a workaround for PCI LSI problems on P9, for
- * these, we call FW to set the mask. The problems might
- * be fixed by P9 DD2.0, if that is the case, firmware
- * will no longer set that flag.
- */
- if (xd->flags & XIVE_IRQ_FLAG_MASK_FW) {
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- xive_ops->configure_irq(hw_irq,
- get_hard_smp_processor_id(xd->target),
- xive_irq_priority, d->irq);
- return;
- }
-
xive_do_source_set_mask(xd, false);
}
@@ -696,20 +680,6 @@ static void xive_irq_mask(struct irq_data *d)
pr_devel("xive_irq_mask: irq %d data @%p\n", d->irq, xd);
- /*
- * This is a workaround for PCI LSI problems on P9, for
- * these, we call OPAL to set the mask. The problems might
- * be fixed by P9 DD2.0, if that is the case, firmware
- * will no longer set that flag.
- */
- if (xd->flags & XIVE_IRQ_FLAG_MASK_FW) {
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- xive_ops->configure_irq(hw_irq,
- get_hard_smp_processor_id(xd->target),
- 0xff, d->irq);
- return;
- }
-
xive_do_source_set_mask(xd, true);
}
@@ -852,13 +822,6 @@ static int xive_irq_set_vcpu_affinity(struct irq_data *d, void *state)
int rc;
u8 pq;
- /*
- * We only support this on interrupts that do not require
- * firmware calls for masking and unmasking
- */
- if (xd->flags & XIVE_IRQ_FLAG_MASK_FW)
- return -EIO;
-
/*
* This is called by KVM with state non-NULL for enabling
* pass-through or NULL for disabling it
@@ -1304,7 +1267,6 @@ static const struct {
} xive_irq_flags[] = {
{ XIVE_IRQ_FLAG_STORE_EOI, "STORE_EOI" },
{ XIVE_IRQ_FLAG_LSI, "LSI" },
- { XIVE_IRQ_FLAG_MASK_FW, "MASK_FW" },
{ XIVE_IRQ_FLAG_EOI_FW, "EOI_FW" },
{ XIVE_IRQ_FLAG_H_INT_ESB, "H_INT_ESB" },
{ XIVE_IRQ_FLAG_NO_EOI, "NO_EOI" },
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index f501b1640068..6c04ac1f3a1f 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -64,8 +64,6 @@ int xive_native_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
data->flags |= XIVE_IRQ_FLAG_STORE_EOI;
if (opal_flags & OPAL_XIVE_IRQ_LSI)
data->flags |= XIVE_IRQ_FLAG_LSI;
- if (opal_flags & OPAL_XIVE_IRQ_MASK_VIA_FW)
- data->flags |= XIVE_IRQ_FLAG_MASK_FW;
if (opal_flags & OPAL_XIVE_IRQ_EOI_VIA_FW)
data->flags |= XIVE_IRQ_FLAG_EOI_FW;
data->eoi_page = be64_to_cpu(eoi_page);
--
2.26.2
^ permalink raw reply related
* [PATCH v2 06/13] powerpc/xive: Add a debug_show handler to the XIVE irq_domain
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
Full state of the Linux interrupt descriptors can be dumped under
debugfs when compiled with CONFIG_GENERIC_IRQ_DEBUGFS. Add support for
the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/common.c | 58 +++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 7314b87d0b45..348445ffa0af 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1303,11 +1303,69 @@ static int xive_irq_domain_match(struct irq_domain *h, struct device_node *node,
return xive_ops->match(node);
}
+#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
+static const char * const esb_names[] = { "RESET", "OFF", "PENDING", "QUEUED" };
+
+static const struct {
+ u64 mask;
+ char *name;
+} xive_irq_flags[] = {
+ { XIVE_IRQ_FLAG_STORE_EOI, "STORE_EOI" },
+ { XIVE_IRQ_FLAG_LSI, "LSI" },
+ { XIVE_IRQ_FLAG_SHIFT_BUG, "SHIFT_BUG" },
+ { XIVE_IRQ_FLAG_MASK_FW, "MASK_FW" },
+ { XIVE_IRQ_FLAG_EOI_FW, "EOI_FW" },
+ { XIVE_IRQ_FLAG_H_INT_ESB, "H_INT_ESB" },
+ { XIVE_IRQ_FLAG_NO_EOI, "NO_EOI" },
+};
+
+static void xive_irq_domain_debug_show(struct seq_file *m, struct irq_domain *d,
+ struct irq_data *irqd, int ind)
+{
+ struct xive_irq_data *xd;
+ u64 val;
+ int i;
+
+ /* No IRQ domain level information. To be done */
+ if (!irqd)
+ return;
+
+ if (!is_xive_irq(irq_data_get_irq_chip(irqd)))
+ return;
+
+ seq_printf(m, "%*sXIVE:\n", ind, "");
+ ind++;
+
+ xd = irq_data_get_irq_handler_data(irqd);
+ if (!xd) {
+ seq_printf(m, "%*snot assigned\n", ind, "");
+ return;
+ }
+
+ val = xive_esb_read(xd, XIVE_ESB_GET);
+ seq_printf(m, "%*sESB: %s\n", ind, "", esb_names[val & 0x3]);
+ seq_printf(m, "%*sPstate: %s %s\n", ind, "", xd->stale_p ? "stale" : "",
+ xd->saved_p ? "saved" : "");
+ seq_printf(m, "%*sTarget: %d\n", ind, "", xd->target);
+ seq_printf(m, "%*sChip: %d\n", ind, "", xd->src_chip);
+ seq_printf(m, "%*sTrigger: 0x%016llx\n", ind, "", xd->trig_page);
+ seq_printf(m, "%*sEOI: 0x%016llx\n", ind, "", xd->eoi_page);
+ seq_printf(m, "%*sFlags: 0x%llx\n", ind, "", xd->flags);
+ for (i = 0; i < ARRAY_SIZE(xive_irq_flags); i++) {
+ if (xd->flags & xive_irq_flags[i].mask)
+ seq_printf(m, "%*s%s\n", ind + 12, "", xive_irq_flags[i].name);
+ }
+}
+#endif
+
static const struct irq_domain_ops xive_irq_domain_ops = {
.match = xive_irq_domain_match,
.map = xive_irq_domain_map,
.unmap = xive_irq_domain_unmap,
.xlate = xive_irq_domain_xlate,
+#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
+ .debug_show = xive_irq_domain_debug_show,
+#endif
};
static void __init xive_init_host(struct device_node *np)
--
2.26.2
^ permalink raw reply related
* [PATCH v2 10/13] powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
This flag was used to support the P9 DD1 and we have stopped
supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Also, remove eoi handler which is now unused.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/include/asm/opal-api.h | 2 +-
arch/powerpc/include/asm/xive.h | 2 +-
arch/powerpc/sysdev/xive/xive-internal.h | 1 -
arch/powerpc/kvm/book3s_xive_template.c | 2 --
arch/powerpc/sysdev/xive/common.c | 14 +-------------
arch/powerpc/sysdev/xive/native.c | 12 ------------
arch/powerpc/sysdev/xive/spapr.c | 6 ------
7 files changed, 3 insertions(+), 36 deletions(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 0455b679c050..0b63ba7d5917 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -1093,7 +1093,7 @@ enum {
OPAL_XIVE_IRQ_LSI = 0x00000004,
OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008, /* P9 DD1.0 workaround */
OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010, /* P9 DD1.0 workaround */
- OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020,
+ OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020, /* P9 DD1.0 workaround */
};
/* Flags for OPAL_XIVE_GET/SET_QUEUE_INFO */
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 8d5b0dcc253c..9a312b975ca8 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -62,7 +62,7 @@ struct xive_irq_data {
#define XIVE_IRQ_FLAG_LSI 0x02
/* #define XIVE_IRQ_FLAG_SHIFT_BUG 0x04 */ /* P9 DD1.0 workaround */
/* #define XIVE_IRQ_FLAG_MASK_FW 0x08 */ /* P9 DD1.0 workaround */
-#define XIVE_IRQ_FLAG_EOI_FW 0x10
+/* #define XIVE_IRQ_FLAG_EOI_FW 0x10 */ /* P9 DD1.0 workaround */
#define XIVE_IRQ_FLAG_H_INT_ESB 0x20
/* Special flag set by KVM for excalation interrupts */
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index c07fadb9d264..9cf57c722faa 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -52,7 +52,6 @@ struct xive_ops {
void (*shutdown)(void);
void (*update_pending)(struct xive_cpu *xc);
- void (*eoi)(u32 hw_irq);
void (*sync_source)(u32 hw_irq);
u64 (*esb_rw)(u32 hw_irq, u32 offset, u64 data, bool write);
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/kvm/book3s_xive_template.c b/arch/powerpc/kvm/book3s_xive_template.c
index ece36e024a8f..b0015e05d99a 100644
--- a/arch/powerpc/kvm/book3s_xive_template.c
+++ b/arch/powerpc/kvm/book3s_xive_template.c
@@ -74,8 +74,6 @@ static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
/* If the XIVE supports the new "store EOI facility, use it */
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
__x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
- else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW)
- opal_int_eoi(hw_irq);
else if (xd->flags & XIVE_IRQ_FLAG_LSI) {
/*
* For LSIs the HW EOI cycle is used rather than PQ bits,
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index b240eb698920..ed9bc49f45a7 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -354,18 +354,7 @@ static void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
/* If the XIVE supports the new "store EOI facility, use it */
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
xive_esb_write(xd, XIVE_ESB_STORE_EOI, 0);
- else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
- /*
- * The FW told us to call it. This happens for some
- * interrupt sources that need additional HW whacking
- * beyond the ESB manipulation. For example LPC interrupts
- * on P9 DD1.0 needed a latch to be clared in the LPC bridge
- * itself. The Firmware will take care of it.
- */
- if (WARN_ON_ONCE(!xive_ops->eoi))
- return;
- xive_ops->eoi(hw_irq);
- } else {
+ else {
u8 eoi_val;
/*
@@ -1267,7 +1256,6 @@ static const struct {
} xive_irq_flags[] = {
{ XIVE_IRQ_FLAG_STORE_EOI, "STORE_EOI" },
{ XIVE_IRQ_FLAG_LSI, "LSI" },
- { XIVE_IRQ_FLAG_EOI_FW, "EOI_FW" },
{ XIVE_IRQ_FLAG_H_INT_ESB, "H_INT_ESB" },
{ XIVE_IRQ_FLAG_NO_EOI, "NO_EOI" },
};
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 6c04ac1f3a1f..e91519c42463 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -64,8 +64,6 @@ int xive_native_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
data->flags |= XIVE_IRQ_FLAG_STORE_EOI;
if (opal_flags & OPAL_XIVE_IRQ_LSI)
data->flags |= XIVE_IRQ_FLAG_LSI;
- if (opal_flags & OPAL_XIVE_IRQ_EOI_VIA_FW)
- data->flags |= XIVE_IRQ_FLAG_EOI_FW;
data->eoi_page = be64_to_cpu(eoi_page);
data->trig_page = be64_to_cpu(trig_page);
data->esb_shift = be32_to_cpu(esb_shift);
@@ -380,15 +378,6 @@ static void xive_native_update_pending(struct xive_cpu *xc)
}
}
-static void xive_native_eoi(u32 hw_irq)
-{
- /*
- * Not normally used except if specific interrupts need
- * a workaround on EOI.
- */
- opal_int_eoi(hw_irq);
-}
-
static void xive_native_setup_cpu(unsigned int cpu, struct xive_cpu *xc)
{
s64 rc;
@@ -471,7 +460,6 @@ static const struct xive_ops xive_native_ops = {
.match = xive_native_match,
.shutdown = xive_native_shutdown,
.update_pending = xive_native_update_pending,
- .eoi = xive_native_eoi,
.setup_cpu = xive_native_setup_cpu,
.teardown_cpu = xive_native_teardown_cpu,
.sync_source = xive_native_sync_source,
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 6610e5149d5a..01ccc0786ada 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -628,11 +628,6 @@ static void xive_spapr_update_pending(struct xive_cpu *xc)
}
}
-static void xive_spapr_eoi(u32 hw_irq)
-{
- /* Not used */;
-}
-
static void xive_spapr_setup_cpu(unsigned int cpu, struct xive_cpu *xc)
{
/* Only some debug on the TIMA settings */
@@ -677,7 +672,6 @@ static const struct xive_ops xive_spapr_ops = {
.match = xive_spapr_match,
.shutdown = xive_spapr_shutdown,
.update_pending = xive_spapr_update_pending,
- .eoi = xive_spapr_eoi,
.setup_cpu = xive_spapr_setup_cpu,
.teardown_cpu = xive_spapr_teardown_cpu,
.sync_source = xive_spapr_sync_source,
--
2.26.2
^ permalink raw reply related
* [PATCH v2 00/13] powerpc/xive: misc cleanups
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
Hello,
The most important change is the removal of support of OPAL flags
required for P9 DD1. It provides a good cleanup of some complex
routines.
Thanks,
C.
Changes since v1:
- dropped the change on the allocation of the pages donated to the
XIVE IC. Needs a retest on a specific system.
- Took into account Greg's comments on flag removal.
Cédric Le Goater (13):
KVM: PPC: Book3S HV: XIVE: Show detailed configuration in debug output
powerpc/xive: Rename XIVE_IRQ_NO_EOI to show its a flag
powerpc/xive: Introduce XIVE_IPI_HW_IRQ
powerpc/xive: Use cpu_to_node() instead of ibm,chip-id property
powerpc/xive: Add a name to the IRQ domain
powerpc/xive: Add a debug_show handler to the XIVE irq_domain
powerpc: Increase NR_IRQS range to support more KVM guests
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Improve error reporting of OPAL calls
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
arch/powerpc/include/asm/opal-api.h | 6 +-
arch/powerpc/include/asm/xive.h | 8 +-
arch/powerpc/kvm/book3s_xive.h | 13 ++
arch/powerpc/sysdev/xive/xive-internal.h | 7 +-
arch/powerpc/kvm/book3s_xive.c | 134 +++++++-------
arch/powerpc/kvm/book3s_xive_native.c | 24 ++-
arch/powerpc/kvm/book3s_xive_template.c | 5 -
arch/powerpc/sysdev/xive/common.c | 214 +++++++++++------------
arch/powerpc/sysdev/xive/native.c | 46 ++---
arch/powerpc/sysdev/xive/spapr.c | 8 +-
arch/powerpc/Kconfig | 2 +-
11 files changed, 234 insertions(+), 233 deletions(-)
--
2.26.2
^ permalink raw reply
* [PATCH v2 03/13] powerpc/xive: Introduce XIVE_IPI_HW_IRQ
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
The XIVE driver deals with CPU IPIs in a peculiar way. Each CPU has
its own XIVE IPI interrupt allocated at the HW level, for PowerNV, or
at the hypervisor level for pSeries. In practice, these interrupts are
not always used. pSeries/PowerVM prefers local doorbells for local
threads since they are faster. On PowerNV, global doorbells are also
preferred for the same reason.
The mapping in the Linux is reduced to a single interrupt using HW
interrupt number 0 and a custom irq_chip to handle EOI. This can cause
performance issues in some benchmark (ipistorm) on multichip systems.
Clarify the use of the 0 value, it will help in improving multichip
support.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/xive-internal.h | 2 ++
arch/powerpc/sysdev/xive/common.c | 10 +++++-----
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index b7b901da2168..d701af7fb48c 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -5,6 +5,8 @@
#ifndef __XIVE_INTERNAL_H
#define __XIVE_INTERNAL_H
+#define XIVE_IPI_HW_IRQ 0 /* interrupt source # for IPIs */
+
/*
* A "disabled" interrupt should never fire, to catch problems
* we set its logical number to this
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 65af34ac1fa2..ee375daf8114 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1142,7 +1142,7 @@ static void __init xive_request_ipi(void)
return;
/* Initialize it */
- virq = irq_create_mapping(xive_irq_domain, 0);
+ virq = irq_create_mapping(xive_irq_domain, XIVE_IPI_HW_IRQ);
xive_ipi_irq = virq;
WARN_ON(request_irq(virq, xive_muxed_ipi_action,
@@ -1242,7 +1242,7 @@ static int xive_irq_domain_map(struct irq_domain *h, unsigned int virq,
#ifdef CONFIG_SMP
/* IPIs are special and come up with HW number 0 */
- if (hw == 0) {
+ if (hw == XIVE_IPI_HW_IRQ) {
/*
* IPIs are marked per-cpu. We use separate HW interrupts under
* the hood but associated with the same "linux" interrupt
@@ -1271,7 +1271,7 @@ static void xive_irq_domain_unmap(struct irq_domain *d, unsigned int virq)
if (!data)
return;
hw_irq = (unsigned int)irqd_to_hwirq(data);
- if (hw_irq)
+ if (hw_irq != XIVE_IPI_HW_IRQ)
xive_irq_free_data(virq);
}
@@ -1421,7 +1421,7 @@ static void xive_flush_cpu_queue(unsigned int cpu, struct xive_cpu *xc)
* Ignore anything that isn't a XIVE irq and ignore
* IPIs, so can just be dropped.
*/
- if (d->domain != xive_irq_domain || hw_irq == 0)
+ if (d->domain != xive_irq_domain || hw_irq == XIVE_IPI_HW_IRQ)
continue;
/*
@@ -1655,7 +1655,7 @@ static int xive_core_debug_show(struct seq_file *m, void *private)
hw_irq = (unsigned int)irqd_to_hwirq(d);
/* IPIs are special (HW number 0) */
- if (hw_irq)
+ if (hw_irq != XIVE_IPI_HW_IRQ)
xive_debug_show_irq(m, hw_irq, d);
}
return 0;
--
2.26.2
^ permalink raw reply related
* [PATCH v2 12/13] powerpc/xive: Improve error reporting of OPAL calls
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
Introduce a vp_err() macro to standardize error reporting.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/native.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index e91519c42463..05a800a3104e 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -122,6 +122,8 @@ static int xive_native_get_irq_config(u32 hw_irq, u32 *target, u8 *prio,
return rc == 0 ? 0 : -ENXIO;
}
+#define vp_err(vp, fmt, ...) pr_err("VP[0x%x]: " fmt, vp, ##__VA_ARGS__)
+
/* This can be called multiple time to change a queue configuration */
int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
__be32 *qpage, u32 order, bool can_escalate)
@@ -149,7 +151,7 @@ int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
&esc_irq_be,
NULL);
if (rc) {
- pr_err("Error %lld getting queue info prio %d\n", rc, prio);
+ vp_err(vp_id, "Failed to get queue %d info : %lld\n", prio, rc);
rc = -EIO;
goto fail;
}
@@ -172,7 +174,7 @@ int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
msleep(OPAL_BUSY_DELAY_MS);
}
if (rc) {
- pr_err("Error %lld setting queue for prio %d\n", rc, prio);
+ vp_err(vp_id, "Failed to set queue %d info: %lld\n", prio, rc);
rc = -EIO;
} else {
/*
@@ -199,7 +201,7 @@ static void __xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio)
msleep(OPAL_BUSY_DELAY_MS);
}
if (rc)
- pr_err("Error %lld disabling queue for prio %d\n", rc, prio);
+ vp_err(vp_id, "Failed to disable queue %d : %lld\n", prio, rc);
}
void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio)
@@ -698,6 +700,8 @@ int xive_native_enable_vp(u32 vp_id, bool single_escalation)
break;
msleep(OPAL_BUSY_DELAY_MS);
}
+ if (rc)
+ vp_err(vp_id, "Failed to enable VP : %lld\n", rc);
return rc ? -EIO : 0;
}
EXPORT_SYMBOL_GPL(xive_native_enable_vp);
@@ -712,6 +716,8 @@ int xive_native_disable_vp(u32 vp_id)
break;
msleep(OPAL_BUSY_DELAY_MS);
}
+ if (rc)
+ vp_err(vp_id, "Failed to disable VP : %lld\n", rc);
return rc ? -EIO : 0;
}
EXPORT_SYMBOL_GPL(xive_native_disable_vp);
@@ -723,8 +729,10 @@ int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id)
s64 rc;
rc = opal_xive_get_vp_info(vp_id, NULL, &vp_cam_be, NULL, &vp_chip_id_be);
- if (rc)
+ if (rc) {
+ vp_err(vp_id, "Failed to get VP info : %lld\n", rc);
return -EIO;
+ }
*out_cam_id = be64_to_cpu(vp_cam_be) & 0xffffffffu;
*out_chip_id = be32_to_cpu(vp_chip_id_be);
@@ -755,8 +763,7 @@ int xive_native_get_queue_info(u32 vp_id, u32 prio,
rc = opal_xive_get_queue_info(vp_id, prio, &qpage, &qsize,
&qeoi_page, &escalate_irq, &qflags);
if (rc) {
- pr_err("OPAL failed to get queue info for VCPU %d/%d : %lld\n",
- vp_id, prio, rc);
+ vp_err(vp_id, "failed to get queue %d info : %lld\n", prio, rc);
return -EIO;
}
@@ -784,8 +791,7 @@ int xive_native_get_queue_state(u32 vp_id, u32 prio, u32 *qtoggle, u32 *qindex)
rc = opal_xive_get_queue_state(vp_id, prio, &opal_qtoggle,
&opal_qindex);
if (rc) {
- pr_err("OPAL failed to get queue state for VCPU %d/%d : %lld\n",
- vp_id, prio, rc);
+ vp_err(vp_id, "failed to get queue %d state : %lld\n", prio, rc);
return -EIO;
}
@@ -804,8 +810,7 @@ int xive_native_set_queue_state(u32 vp_id, u32 prio, u32 qtoggle, u32 qindex)
rc = opal_xive_set_queue_state(vp_id, prio, qtoggle, qindex);
if (rc) {
- pr_err("OPAL failed to set queue state for VCPU %d/%d : %lld\n",
- vp_id, prio, rc);
+ vp_err(vp_id, "failed to set queue %d state : %lld\n", prio, rc);
return -EIO;
}
@@ -827,8 +832,7 @@ int xive_native_get_vp_state(u32 vp_id, u64 *out_state)
rc = opal_xive_get_vp_state(vp_id, &state);
if (rc) {
- pr_err("OPAL failed to get vp state for VCPU %d : %lld\n",
- vp_id, rc);
+ vp_err(vp_id, "failed to get vp state : %lld\n", rc);
return -EIO;
}
--
2.26.2
^ permalink raw reply related
* [PATCH v2 01/13] KVM: PPC: Book3S HV: XIVE: Show detailed configuration in debug output
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
This is useful to track allocation of the HW resources on per guest
basis. Making sure IPIs are local to the chip of the vCPUs reduces
rerouting between interrupt controllers and gives better performance
in case of pinning. Checking the distribution of VP structures on the
chips also helps in reducing PowerBUS traffic.
Signed-off-by: Greg Kurz <groug@kaod.org>
[ clg: resurrected show_sources and reworked ouput ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/kvm/book3s_xive.h | 2 +
arch/powerpc/kvm/book3s_xive.c | 76 ++++++++++++++++++++++-----
arch/powerpc/kvm/book3s_xive_native.c | 21 ++++++--
3 files changed, 82 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_xive.h b/arch/powerpc/kvm/book3s_xive.h
index 382e3a56e789..d5d4fee7ac94 100644
--- a/arch/powerpc/kvm/book3s_xive.h
+++ b/arch/powerpc/kvm/book3s_xive.h
@@ -290,6 +290,8 @@ extern int (*__xive_vm_h_eoi)(struct kvm_vcpu *vcpu, unsigned long xirr);
*/
void kvmppc_xive_disable_vcpu_interrupts(struct kvm_vcpu *vcpu);
int kvmppc_xive_debug_show_queues(struct seq_file *m, struct kvm_vcpu *vcpu);
+void kvmppc_xive_debug_show_sources(struct seq_file *m,
+ struct kvmppc_xive_src_block *sb);
struct kvmppc_xive_src_block *kvmppc_xive_create_src_block(
struct kvmppc_xive *xive, int irq);
void kvmppc_xive_free_sources(struct kvmppc_xive_src_block *sb);
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index a0ebc29f30b2..18a6b75a3bfd 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -2125,9 +2125,8 @@ int kvmppc_xive_debug_show_queues(struct seq_file *m, struct kvm_vcpu *vcpu)
if (!q->qpage && !xc->esc_virq[i])
continue;
- seq_printf(m, " [q%d]: ", i);
-
if (q->qpage) {
+ seq_printf(m, " q[%d]: ", i);
idx = q->idx;
i0 = be32_to_cpup(q->qpage + idx);
idx = (idx + 1) & q->msk;
@@ -2141,16 +2140,54 @@ int kvmppc_xive_debug_show_queues(struct seq_file *m, struct kvm_vcpu *vcpu)
irq_data_get_irq_handler_data(d);
u64 pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
- seq_printf(m, "E:%c%c I(%d:%llx:%llx)",
- (pq & XIVE_ESB_VAL_P) ? 'P' : 'p',
- (pq & XIVE_ESB_VAL_Q) ? 'Q' : 'q',
- xc->esc_virq[i], pq, xd->eoi_page);
+ seq_printf(m, " ESC %d %c%c EOI @%llx",
+ xc->esc_virq[i],
+ (pq & XIVE_ESB_VAL_P) ? 'P' : '-',
+ (pq & XIVE_ESB_VAL_Q) ? 'Q' : '-',
+ xd->eoi_page);
seq_puts(m, "\n");
}
}
return 0;
}
+void kvmppc_xive_debug_show_sources(struct seq_file *m,
+ struct kvmppc_xive_src_block *sb)
+{
+ int i;
+
+ seq_puts(m, " LISN HW/CHIP TYPE PQ EISN CPU/PRIO\n");
+ for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[i];
+ struct xive_irq_data *xd;
+ u64 pq;
+ u32 hw_num;
+
+ if (!state->valid)
+ continue;
+
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
+
+ seq_printf(m, "%08x %08x/%02x", state->number, hw_num,
+ xd->src_chip);
+ if (state->lsi)
+ seq_printf(m, " %cLSI", state->asserted ? '^' : ' ');
+ else
+ seq_puts(m, " MSI");
+
+ seq_printf(m, " %s %c%c %08x % 4d/%d",
+ state->ipi_number == hw_num ? "IPI" : " PT",
+ pq & XIVE_ESB_VAL_P ? 'P' : '-',
+ pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
+ state->eisn, state->act_server,
+ state->act_priority);
+
+ seq_puts(m, "\n");
+ }
+}
+
static int xive_debug_show(struct seq_file *m, void *private)
{
struct kvmppc_xive *xive = m->private;
@@ -2171,7 +2208,7 @@ static int xive_debug_show(struct seq_file *m, void *private)
if (!kvm)
return 0;
- seq_printf(m, "=========\nVCPU state\n=========\n");
+ seq_puts(m, "=========\nVCPU state\n=========\n");
kvm_for_each_vcpu(i, vcpu, kvm) {
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
@@ -2179,11 +2216,12 @@ static int xive_debug_show(struct seq_file *m, void *private)
if (!xc)
continue;
- seq_printf(m, "cpu server %#x VP:%#x CPPR:%#x HWCPPR:%#x"
- " MFRR:%#x PEND:%#x h_xirr: R=%lld V=%lld\n",
- xc->server_num, xc->vp_id, xc->cppr, xc->hw_cppr,
- xc->mfrr, xc->pending,
- xc->stat_rm_h_xirr, xc->stat_vm_h_xirr);
+ seq_printf(m, "VCPU %d: VP:%#x/%02x\n"
+ " CPPR:%#x HWCPPR:%#x MFRR:%#x PEND:%#x h_xirr: R=%lld V=%lld\n",
+ xc->server_num, xc->vp_id, xc->vp_chip_id,
+ xc->cppr, xc->hw_cppr,
+ xc->mfrr, xc->pending,
+ xc->stat_rm_h_xirr, xc->stat_vm_h_xirr);
kvmppc_xive_debug_show_queues(m, vcpu);
@@ -2199,13 +2237,25 @@ static int xive_debug_show(struct seq_file *m, void *private)
t_vm_h_ipi += xc->stat_vm_h_ipi;
}
- seq_printf(m, "Hcalls totals\n");
+ seq_puts(m, "Hcalls totals\n");
seq_printf(m, " H_XIRR R=%10lld V=%10lld\n", t_rm_h_xirr, t_vm_h_xirr);
seq_printf(m, " H_IPOLL R=%10lld V=%10lld\n", t_rm_h_ipoll, t_vm_h_ipoll);
seq_printf(m, " H_CPPR R=%10lld V=%10lld\n", t_rm_h_cppr, t_vm_h_cppr);
seq_printf(m, " H_EOI R=%10lld V=%10lld\n", t_rm_h_eoi, t_vm_h_eoi);
seq_printf(m, " H_IPI R=%10lld V=%10lld\n", t_rm_h_ipi, t_vm_h_ipi);
+ seq_puts(m, "=========\nSources\n=========\n");
+
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+
+ if (sb) {
+ arch_spin_lock(&sb->lock);
+ kvmppc_xive_debug_show_sources(m, sb);
+ arch_spin_unlock(&sb->lock);
+ }
+ }
+
return 0;
}
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index 6aaaa4bedaaf..9b395381179d 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -1257,18 +1257,31 @@ static int xive_native_debug_show(struct seq_file *m, void *private)
if (!xc)
continue;
- seq_printf(m, "cpu server %#x VP=%#x NSR=%02x CPPR=%02x IBP=%02x PIPR=%02x w01=%016llx w2=%08x\n",
- xc->server_num, xc->vp_id,
+ seq_printf(m, "VCPU %d: VP=%#x/%02x\n"
+ " NSR=%02x CPPR=%02x IBP=%02x PIPR=%02x w01=%016llx w2=%08x\n",
+ xc->server_num, xc->vp_id, xc->vp_chip_id,
vcpu->arch.xive_saved_state.nsr,
vcpu->arch.xive_saved_state.cppr,
vcpu->arch.xive_saved_state.ipb,
vcpu->arch.xive_saved_state.pipr,
- vcpu->arch.xive_saved_state.w01,
- (u32) vcpu->arch.xive_cam_word);
+ be64_to_cpu(vcpu->arch.xive_saved_state.w01),
+ be32_to_cpu(vcpu->arch.xive_cam_word));
kvmppc_xive_debug_show_queues(m, vcpu);
}
+ seq_puts(m, "=========\nSources\n=========\n");
+
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+
+ if (sb) {
+ arch_spin_lock(&sb->lock);
+ kvmppc_xive_debug_show_sources(m, sb);
+ arch_spin_unlock(&sb->lock);
+ }
+ }
+
return 0;
}
--
2.26.2
^ permalink raw reply related
* [PATCH v2 11/13] powerpc/xive: Simplify xive_do_source_eoi()
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
Previous patches removed the need of the first argument which was a
hack for Firwmware EOI. Remove it and flatten the routine which has
became simpler.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/common.c | 72 ++++++++++++++-----------------
1 file changed, 33 insertions(+), 39 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index ed9bc49f45a7..b8e456da28aa 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -348,39 +348,40 @@ static void xive_do_queue_eoi(struct xive_cpu *xc)
* EOI an interrupt at the source. There are several methods
* to do this depending on the HW version and source type
*/
-static void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
+static void xive_do_source_eoi(struct xive_irq_data *xd)
{
+ u8 eoi_val;
+
xd->stale_p = false;
+
/* If the XIVE supports the new "store EOI facility, use it */
- if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
+ if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI) {
xive_esb_write(xd, XIVE_ESB_STORE_EOI, 0);
- else {
- u8 eoi_val;
+ return;
+ }
- /*
- * Otherwise for EOI, we use the special MMIO that does
- * a clear of both P and Q and returns the old Q,
- * except for LSIs where we use the "EOI cycle" special
- * load.
- *
- * This allows us to then do a re-trigger if Q was set
- * rather than synthesizing an interrupt in software
- *
- * For LSIs the HW EOI cycle is used rather than PQ bits,
- * as they are automatically re-triggred in HW when still
- * pending.
- */
- if (xd->flags & XIVE_IRQ_FLAG_LSI)
- xive_esb_read(xd, XIVE_ESB_LOAD_EOI);
- else {
- eoi_val = xive_esb_read(xd, XIVE_ESB_SET_PQ_00);
- DBG_VERBOSE("eoi_val=%x\n", eoi_val);
-
- /* Re-trigger if needed */
- if ((eoi_val & XIVE_ESB_VAL_Q) && xd->trig_mmio)
- out_be64(xd->trig_mmio, 0);
- }
+ /*
+ * For LSIs, we use the "EOI cycle" special load rather than
+ * PQ bits, as they are automatically re-triggered in HW when
+ * still pending.
+ */
+ if (xd->flags & XIVE_IRQ_FLAG_LSI) {
+ xive_esb_read(xd, XIVE_ESB_LOAD_EOI);
+ return;
}
+
+ /*
+ * Otherwise, we use the special MMIO that does a clear of
+ * both P and Q and returns the old Q. This allows us to then
+ * do a re-trigger if Q was set rather than synthesizing an
+ * interrupt in software
+ */
+ eoi_val = xive_esb_read(xd, XIVE_ESB_SET_PQ_00);
+ DBG_VERBOSE("eoi_val=%x\n", eoi_val);
+
+ /* Re-trigger if needed */
+ if ((eoi_val & XIVE_ESB_VAL_Q) && xd->trig_mmio)
+ out_be64(xd->trig_mmio, 0);
}
/* irq_chip eoi callback, called with irq descriptor lock held */
@@ -398,7 +399,7 @@ static void xive_irq_eoi(struct irq_data *d)
*/
if (!irqd_irq_disabled(d) && !irqd_is_forwarded_to_vcpu(d) &&
!(xd->flags & XIVE_IRQ_FLAG_NO_EOI))
- xive_do_source_eoi(irqd_to_hwirq(d), xd);
+ xive_do_source_eoi(xd);
else
xd->stale_p = true;
@@ -788,14 +789,7 @@ static int xive_irq_retrigger(struct irq_data *d)
* 11, then perform an EOI.
*/
xive_esb_read(xd, XIVE_ESB_SET_PQ_11);
-
- /*
- * Note: We pass "0" to the hw_irq argument in order to
- * avoid calling into the backend EOI code which we don't
- * want to do in the case of a re-trigger. Backends typically
- * only do EOI for LSIs anyway.
- */
- xive_do_source_eoi(0, xd);
+ xive_do_source_eoi(xd);
return 1;
}
@@ -910,7 +904,7 @@ static int xive_irq_set_vcpu_affinity(struct irq_data *d, void *state)
* while masked, the generic code will re-mask it anyway.
*/
if (!xd->saved_p)
- xive_do_source_eoi(hw_irq, xd);
+ xive_do_source_eoi(xd);
}
return 0;
@@ -1054,7 +1048,7 @@ static void xive_ipi_eoi(struct irq_data *d)
DBG_VERBOSE("IPI eoi: irq=%d [0x%lx] (HW IRQ 0x%x) pending=%02x\n",
d->irq, irqd_to_hwirq(d), xc->hw_ipi, xc->pending_prio);
- xive_do_source_eoi(xc->hw_ipi, &xc->ipi_data);
+ xive_do_source_eoi(&xc->ipi_data);
xive_do_queue_eoi(xc);
}
@@ -1440,7 +1434,7 @@ static void xive_flush_cpu_queue(unsigned int cpu, struct xive_cpu *xc)
* still asserted. Otherwise do an MSI retrigger.
*/
if (xd->flags & XIVE_IRQ_FLAG_LSI)
- xive_do_source_eoi(irqd_to_hwirq(d), xd);
+ xive_do_source_eoi(xd);
else
xive_irq_retrigger(d);
--
2.26.2
^ permalink raw reply related
* [PATCH v2 04/13] powerpc/xive: Use cpu_to_node() instead of ibm, chip-id property
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
The 'chip_id' field of the XIVE CPU structure is used to choose a
target for a source located on the same chip when possible. This field
is assigned on the PowerNV platform using the "ibm,chip-id" property
on pSeries under KVM when NUMA nodes are defined but it is undefined
under PowerVM. The XIVE source structure has a similar field
'src_chip' which is only assigned on the PowerNV platform.
cpu_to_node() returns a compatible value on all platforms, 0 being the
default node. It will also give us the opportunity to set the affinity
of a source on pSeries when we can localize them.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/common.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index ee375daf8114..605238ca65e4 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1342,16 +1342,11 @@ static int xive_prepare_cpu(unsigned int cpu)
xc = per_cpu(xive_cpu, cpu);
if (!xc) {
- struct device_node *np;
-
xc = kzalloc_node(sizeof(struct xive_cpu),
GFP_KERNEL, cpu_to_node(cpu));
if (!xc)
return -ENOMEM;
- np = of_get_cpu_node(cpu, NULL);
- if (np)
- xc->chip_id = of_get_ibm_chip_id(np);
- of_node_put(np);
+ xc->chip_id = cpu_to_node(cpu);
xc->hw_ipi = XIVE_BAD_IRQ;
per_cpu(xive_cpu, cpu) = xc;
--
2.26.2
^ permalink raw reply related
* [PATCH v2 05/13] powerpc/xive: Add a name to the IRQ domain
From: Cédric Le Goater @ 2020-12-10 17:14 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Greg Kurz, Cédric Le Goater
In-Reply-To: <20201210171450.1933725-1-clg@kaod.org>
We hope one day to handle multiple irq_domain in the XIVE driver.
Start simple by setting the name using the DT node.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/xive-internal.h | 4 ++--
arch/powerpc/sysdev/xive/common.c | 10 +++++-----
arch/powerpc/sysdev/xive/native.c | 2 +-
arch/powerpc/sysdev/xive/spapr.c | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index d701af7fb48c..c07fadb9d264 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -63,8 +63,8 @@ struct xive_ops {
const char *name;
};
-bool xive_core_init(const struct xive_ops *ops, void __iomem *area, u32 offset,
- u8 max_prio);
+bool xive_core_init(struct device_node *np, const struct xive_ops *ops,
+ void __iomem *area, u32 offset, u8 max_prio);
__be32 *xive_queue_page_alloc(unsigned int cpu, u32 queue_shift);
int xive_core_debug_init(void);
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 605238ca65e4..7314b87d0b45 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1310,9 +1310,9 @@ static const struct irq_domain_ops xive_irq_domain_ops = {
.xlate = xive_irq_domain_xlate,
};
-static void __init xive_init_host(void)
+static void __init xive_init_host(struct device_node *np)
{
- xive_irq_domain = irq_domain_add_nomap(NULL, XIVE_MAX_IRQ,
+ xive_irq_domain = irq_domain_add_nomap(np, XIVE_MAX_IRQ,
&xive_irq_domain_ops, NULL);
if (WARN_ON(xive_irq_domain == NULL))
return;
@@ -1508,8 +1508,8 @@ void xive_shutdown(void)
xive_ops->shutdown();
}
-bool __init xive_core_init(const struct xive_ops *ops, void __iomem *area, u32 offset,
- u8 max_prio)
+bool __init xive_core_init(struct device_node *np, const struct xive_ops *ops,
+ void __iomem *area, u32 offset, u8 max_prio)
{
xive_tima = area;
xive_tima_offset = offset;
@@ -1520,7 +1520,7 @@ bool __init xive_core_init(const struct xive_ops *ops, void __iomem *area, u32 o
__xive_enabled = true;
pr_devel("Initializing host..\n");
- xive_init_host();
+ xive_init_host(np);
pr_devel("Initializing boot CPU..\n");
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index cb58ec7ce77a..c3182ec9ed65 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -622,7 +622,7 @@ bool __init xive_native_init(void)
xive_native_setup_pools();
/* Initialize XIVE core with our backend */
- if (!xive_core_init(&xive_native_ops, tima, TM_QW3_HV_PHYS,
+ if (!xive_core_init(np, &xive_native_ops, tima, TM_QW3_HV_PHYS,
max_prio)) {
opal_xive_reset(OPAL_XIVE_MODE_EMU);
return false;
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 1e3674d7ea7b..6610e5149d5a 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -857,7 +857,7 @@ bool __init xive_spapr_init(void)
}
/* Initialize XIVE core with our backend */
- if (!xive_core_init(&xive_spapr_ops, tima, TM_QW1_OS, max_prio))
+ if (!xive_core_init(np, &xive_spapr_ops, tima, TM_QW1_OS, max_prio))
return false;
pr_info("Using %dkB queues\n", 1 << (xive_queue_shift - 10));
--
2.26.2
^ permalink raw reply related
* Re: [PATCH] cxl: Reduce scope for the variable “mm” in cxllib_get_PE_attributes()
From: Markus Elfring @ 2020-12-10 16:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, linuxppc-dev
Cc: Frederic Barrat, kernel-janitors, Andrew Donnellan, Arnd Bergmann,
LKML
In-Reply-To: <X9I1GLYCkw/q/xMu@kroah.com>
>> A local variable was used only within an if branch.
>> Thus move the definition for the variable “mm” into the corresponding
>> code block.
>
> You did nothing here except add a checkpatch warning :(
elfring@Sonne:~/Projekte/Linux/next-patched> scripts/checkpatch.pl /home/elfring/Projekte/Bau/Linux/scripts/Coccinelle/tuning1/next/20201204/Flicken/0001-cxl-Reduce-scope-for-the-variable-mm-in-cxllib_get_P.patch
total: 0 errors, 0 warnings, 16 lines checked
Regards,
Markus
^ permalink raw reply
* [PATCH] cxl: Reduce scope for the variable “mm” in cxllib_get_PE_attributes()
From: Markus Elfring @ 2020-12-10 14:35 UTC (permalink / raw)
To: linuxppc-dev, Andrew Donnellan, Arnd Bergmann, Frederic Barrat,
Greg Kroah-Hartman
Cc: kernel-janitors, LKML
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 10 Dec 2020 14:14:07 +0100
A local variable was used only within an if branch.
Thus move the definition for the variable “mm” into the corresponding
code block.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/misc/cxl/cxllib.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
index 2a1783f32254..53b919856426 100644
--- a/drivers/misc/cxl/cxllib.c
+++ b/drivers/misc/cxl/cxllib.c
@@ -170,8 +170,6 @@ int cxllib_get_PE_attributes(struct task_struct *task,
unsigned long translation_mode,
struct cxllib_pe_attributes *attr)
{
- struct mm_struct *mm = NULL;
-
if (translation_mode != CXL_TRANSLATED_MODE &&
translation_mode != CXL_REAL_MODE)
return -EINVAL;
@@ -182,7 +180,7 @@ int cxllib_get_PE_attributes(struct task_struct *task,
true);
attr->lpid = mfspr(SPRN_LPID);
if (task) {
- mm = get_task_mm(task);
+ struct mm_struct *mm = get_task_mm(task);
if (mm == NULL)
return -EINVAL;
/*
--
2.29.2
^ permalink raw reply related
* Re: [PATCH] cxl: Reduce scope for the variable “mm” in cxllib_get_PE_attributes()
From: Greg Kroah-Hartman @ 2020-12-10 14:47 UTC (permalink / raw)
To: Markus Elfring
Cc: Andrew Donnellan, Arnd Bergmann, kernel-janitors, LKML,
Frederic Barrat, linuxppc-dev
In-Reply-To: <5cee2b25-71e0-15aa-fba6-12211b8308aa@web.de>
On Thu, Dec 10, 2020 at 03:35:38PM +0100, Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Thu, 10 Dec 2020 14:14:07 +0100
>
> A local variable was used only within an if branch.
> Thus move the definition for the variable “mm” into the corresponding
> code block.
You did nothing here except add a checkpatch warning :(
dropped.
greg k-h
^ permalink raw reply
* Re: [PATCH 09/13] powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
From: Cédric Le Goater @ 2020-12-10 13:18 UTC (permalink / raw)
To: Greg Kurz; +Cc: linuxppc-dev
In-Reply-To: <20201208183906.1740c594@bahia.lan>
On 12/8/20 6:39 PM, Greg Kurz wrote:
> On Tue, 8 Dec 2020 16:11:20 +0100
> Cédric Le Goater <clg@kaod.org> wrote:
>
>> This flag was used to support the PHB4 LSIs on P9 DD1 and we have
>> stopped supporting this CPU when DD2 came out. See skiboot commit:
>>
>> https://github.com/open-power/skiboot/commit/0b0d15e3c170
>>
>> Signed-off-by: Cédric Le Goater <clg@kaod.org>
>> ---
>
> Reviewed-by: Greg Kurz <groug@kaod.org>
>
> Just a minor suggestion in case you need to post a v2. See below.
>
>> arch/powerpc/include/asm/opal-api.h | 2 +-
>> arch/powerpc/include/asm/xive.h | 2 +-
>> arch/powerpc/kvm/book3s_xive_native.c | 3 ---
>> arch/powerpc/kvm/book3s_xive_template.c | 3 ---
>> arch/powerpc/sysdev/xive/common.c | 8 --------
>> arch/powerpc/sysdev/xive/native.c | 2 --
>> 6 files changed, 2 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
>> index 1dffa3cb16ba..48ee604ca39a 100644
>> --- a/arch/powerpc/include/asm/opal-api.h
>> +++ b/arch/powerpc/include/asm/opal-api.h
>> @@ -1091,7 +1091,7 @@ enum {
>> OPAL_XIVE_IRQ_TRIGGER_PAGE = 0x00000001,
>> OPAL_XIVE_IRQ_STORE_EOI = 0x00000002,
>> OPAL_XIVE_IRQ_LSI = 0x00000004,
>> - OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008,
>> + OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008, /* P9 DD1.0 workaround */
>
> Maybe you can even comment the entire line so that any future
> tentative to use that flag breaks build ?
This file is "copied" from OPAL. I think it is best to keep them
in sync.
>
>> OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010,
>> OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020,
>> };
>> diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
>> index d332dd9a18de..ff805885a028 100644
>> --- a/arch/powerpc/include/asm/xive.h
>> +++ b/arch/powerpc/include/asm/xive.h
>> @@ -60,7 +60,7 @@ struct xive_irq_data {
>> };
>> #define XIVE_IRQ_FLAG_STORE_EOI 0x01
>> #define XIVE_IRQ_FLAG_LSI 0x02
>> -#define XIVE_IRQ_FLAG_SHIFT_BUG 0x04
>> +#define XIVE_IRQ_FLAG_SHIFT_BUG 0x04 /* P9 DD1.0 workaround */
>
> Same here, with an extra cleanup to stop using it when initializing
> xive_irq_flags[] in common.c.
Yes. Since this is an internal flag, we can simply remove it.
Thanks,
C.
>
>> #define XIVE_IRQ_FLAG_MASK_FW 0x08
>> #define XIVE_IRQ_FLAG_EOI_FW 0x10
>> #define XIVE_IRQ_FLAG_H_INT_ESB 0x20
>> diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
>> index 9b395381179d..170d1d04e1d1 100644
>> --- a/arch/powerpc/kvm/book3s_xive_native.c
>> +++ b/arch/powerpc/kvm/book3s_xive_native.c
>> @@ -37,9 +37,6 @@ static u8 xive_vm_esb_load(struct xive_irq_data *xd, u32 offset)
>> * ordering.
>> */
>>
>> - if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
>> - offset |= offset << 4;
>> -
>> val = in_be64(xd->eoi_mmio + offset);
>> return (u8)val;
>> }
>> diff --git a/arch/powerpc/kvm/book3s_xive_template.c b/arch/powerpc/kvm/book3s_xive_template.c
>> index 4ad3c0279458..ece36e024a8f 100644
>> --- a/arch/powerpc/kvm/book3s_xive_template.c
>> +++ b/arch/powerpc/kvm/book3s_xive_template.c
>> @@ -61,9 +61,6 @@ static u8 GLUE(X_PFX,esb_load)(struct xive_irq_data *xd, u32 offset)
>> if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
>> offset |= XIVE_ESB_LD_ST_MO;
>>
>> - if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
>> - offset |= offset << 4;
>> -
>> val =__x_readq(__x_eoi_page(xd) + offset);
>> #ifdef __LITTLE_ENDIAN__
>> val >>= 64-8;
>> diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
>> index 411cba12d73b..a9259470bf9f 100644
>> --- a/arch/powerpc/sysdev/xive/common.c
>> +++ b/arch/powerpc/sysdev/xive/common.c
>> @@ -200,10 +200,6 @@ static notrace u8 xive_esb_read(struct xive_irq_data *xd, u32 offset)
>> if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
>> offset |= XIVE_ESB_LD_ST_MO;
>>
>> - /* Handle HW errata */
>> - if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
>> - offset |= offset << 4;
>> -
>> if ((xd->flags & XIVE_IRQ_FLAG_H_INT_ESB) && xive_ops->esb_rw)
>> val = xive_ops->esb_rw(xd->hw_irq, offset, 0, 0);
>> else
>> @@ -214,10 +210,6 @@ static notrace u8 xive_esb_read(struct xive_irq_data *xd, u32 offset)
>>
>> static void xive_esb_write(struct xive_irq_data *xd, u32 offset, u64 data)
>> {
>> - /* Handle HW errata */
>> - if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
>> - offset |= offset << 4;
>> -
>> if ((xd->flags & XIVE_IRQ_FLAG_H_INT_ESB) && xive_ops->esb_rw)
>> xive_ops->esb_rw(xd->hw_irq, offset, data, 1);
>> else
>> diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
>> index 5f1e5aed8ab4..0310783241b5 100644
>> --- a/arch/powerpc/sysdev/xive/native.c
>> +++ b/arch/powerpc/sysdev/xive/native.c
>> @@ -64,8 +64,6 @@ int xive_native_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
>> data->flags |= XIVE_IRQ_FLAG_STORE_EOI;
>> if (opal_flags & OPAL_XIVE_IRQ_LSI)
>> data->flags |= XIVE_IRQ_FLAG_LSI;
>> - if (opal_flags & OPAL_XIVE_IRQ_SHIFT_BUG)
>> - data->flags |= XIVE_IRQ_FLAG_SHIFT_BUG;
>> if (opal_flags & OPAL_XIVE_IRQ_MASK_VIA_FW)
>> data->flags |= XIVE_IRQ_FLAG_MASK_FW;
>> if (opal_flags & OPAL_XIVE_IRQ_EOI_VIA_FW)
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox