* [PATCH v5 08/21] ibmvfc: add Sub-CRQ IRQ enable/disable routine
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Each Sub-CRQ has its own interrupt. A hypercall is required to toggle
the IRQ state. Provide the necessary mechanism via a helper function.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a198e118887d..5d7ada0ed0d6 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3465,6 +3465,26 @@ static void ibmvfc_tasklet(void *data)
}
}
+static int ibmvfc_toggle_scrq_irq(struct ibmvfc_queue *scrq, int enable)
+{
+ struct device *dev = scrq->vhost->dev;
+ struct vio_dev *vdev = to_vio_dev(dev);
+ unsigned long rc;
+ int irq_action = H_ENABLE_VIO_INTERRUPT;
+
+ if (!enable)
+ irq_action = H_DISABLE_VIO_INTERRUPT;
+
+ rc = plpar_hcall_norets(H_VIOCTL, vdev->unit_address, irq_action,
+ scrq->hw_irq, 0, 0);
+
+ if (rc)
+ dev_err(dev, "Couldn't %s sub-crq[%lu] irq. rc=%ld\n",
+ enable ? "enable" : "disable", scrq->hwq_id, rc);
+
+ return rc;
+}
+
/**
* ibmvfc_init_tgt - Set the next init job step for the target
* @tgt: ibmvfc target struct
--
2.27.0
^ permalink raw reply related
* [PATCH v5 05/21] ibmvfc: define hcall wrapper for registering a Sub-CRQ
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Sub-CRQs are registred with firmware via a hypercall. Abstract that
interface into a simpler helper function.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 524e81164d70..612c7f3d7bd3 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -138,6 +138,20 @@ static void ibmvfc_tgt_move_login(struct ibmvfc_target *);
static const char *unknown_error = "unknown error";
+static long h_reg_sub_crq(unsigned long unit_address, unsigned long ioba,
+ unsigned long length, unsigned long *cookie,
+ unsigned long *irq)
+{
+ unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+ long rc;
+
+ rc = plpar_hcall(H_REG_SUB_CRQ, retbuf, unit_address, ioba, length);
+ *cookie = retbuf[0];
+ *irq = retbuf[1];
+
+ return rc;
+}
+
static int ibmvfc_check_caps(struct ibmvfc_host *vhost, unsigned long cap_flags)
{
u64 host_caps = be64_to_cpu(vhost->login_buf->resp.capabilities);
--
2.27.0
^ permalink raw reply related
* [PATCH v5 09/21] ibmvfc: add handlers to drain and complete Sub-CRQ responses
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
The logic for iterating over the Sub-CRQ responses is similiar to that
of the primary CRQ. Add the necessary handlers for processing those
responses.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 86 ++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 5d7ada0ed0d6..f3cd092478ee 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3485,6 +3485,92 @@ static int ibmvfc_toggle_scrq_irq(struct ibmvfc_queue *scrq, int enable)
return rc;
}
+static void ibmvfc_handle_scrq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost,
+ struct list_head *evt_doneq)
+{
+ struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu(crq->ioba);
+
+ switch (crq->valid) {
+ case IBMVFC_CRQ_CMD_RSP:
+ break;
+ case IBMVFC_CRQ_XPORT_EVENT:
+ return;
+ default:
+ dev_err(vhost->dev, "Got and invalid message type 0x%02x\n", crq->valid);
+ return;
+ }
+
+ /* The only kind of payload CRQs we should get are responses to
+ * things we send. Make sure this response is to something we
+ * actually sent
+ */
+ if (unlikely(!ibmvfc_valid_event(&evt->queue->evt_pool, evt))) {
+ dev_err(vhost->dev, "Returned correlation_token 0x%08llx is invalid!\n",
+ crq->ioba);
+ return;
+ }
+
+ if (unlikely(atomic_read(&evt->free))) {
+ dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n",
+ crq->ioba);
+ return;
+ }
+
+ spin_lock(&evt->queue->l_lock);
+ list_move_tail(&evt->queue_list, evt_doneq);
+ spin_unlock(&evt->queue->l_lock);
+}
+
+static struct ibmvfc_crq *ibmvfc_next_scrq(struct ibmvfc_queue *scrq)
+{
+ struct ibmvfc_crq *crq;
+
+ crq = &scrq->msgs.scrq[scrq->cur].crq;
+ if (crq->valid & 0x80) {
+ if (++scrq->cur == scrq->size)
+ scrq->cur = 0;
+ rmb();
+ } else
+ crq = NULL;
+
+ return crq;
+}
+
+static void ibmvfc_drain_sub_crq(struct ibmvfc_queue *scrq)
+{
+ struct ibmvfc_crq *crq;
+ struct ibmvfc_event *evt, *temp;
+ unsigned long flags;
+ int done = 0;
+ LIST_HEAD(evt_doneq);
+
+ spin_lock_irqsave(scrq->q_lock, flags);
+ while (!done) {
+ while ((crq = ibmvfc_next_scrq(scrq)) != NULL) {
+ ibmvfc_handle_scrq(crq, scrq->vhost, &evt_doneq);
+ crq->valid = 0;
+ wmb();
+ }
+
+ ibmvfc_toggle_scrq_irq(scrq, 1);
+ if ((crq = ibmvfc_next_scrq(scrq)) != NULL) {
+ ibmvfc_toggle_scrq_irq(scrq, 0);
+ ibmvfc_handle_scrq(crq, scrq->vhost, &evt_doneq);
+ crq->valid = 0;
+ wmb();
+ } else
+ done = 1;
+ }
+ spin_unlock_irqrestore(scrq->q_lock, flags);
+
+ list_for_each_entry_safe(evt, temp, &evt_doneq, queue_list) {
+ del_timer(&evt->timer);
+ list_del(&evt->queue_list);
+ ibmvfc_trc_end(evt);
+ evt->done(evt);
+ }
+}
+
/**
* ibmvfc_init_tgt - Set the next init job step for the target
* @tgt: ibmvfc target struct
--
2.27.0
^ permalink raw reply related
* [PATCH v5 03/21] ibmvfc: init/free event pool during queue allocation/free
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
The event pool and CRQ used to be separate entities of the adapter host
structure and as such were allocated and freed independently of each
other. Recent work as defined a generic queue structure with an event
pool specific to each queue. As such the event pool for each queue
shouldn't be allocated/freed independently, but instead performed as
part of the queue allocation/free routines.
Move the calls to ibmvfc_event_pool_{init|free} into
ibmvfc_{alloc|free}_queue respectively. The only functional change here
is that the CRQ cannot be released in ibmvfc_remove until after the
event pool has been successfully purged since releasing the queue will
also free the event pool.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index cd9273a5fadb..9330f5a65a7e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -807,6 +807,8 @@ static void ibmvfc_free_queue(struct ibmvfc_host *vhost,
dma_unmap_single(dev, queue->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
free_page((unsigned long)queue->msgs.handle);
queue->msgs.handle = NULL;
+
+ ibmvfc_free_event_pool(vhost, queue);
}
/**
@@ -5019,6 +5021,10 @@ static int ibmvfc_alloc_queue(struct ibmvfc_host *vhost,
switch (fmt) {
case IBMVFC_CRQ_FMT:
fmt_size = sizeof(*queue->msgs.crq);
+ if (ibmvfc_init_event_pool(vhost, queue)) {
+ dev_err(dev, "Couldn't initialize event pool.\n");
+ return -ENOMEM;
+ }
break;
case IBMVFC_ASYNC_FMT:
fmt_size = sizeof(*queue->msgs.async);
@@ -5333,13 +5339,8 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
goto kill_kthread;
}
- if ((rc = ibmvfc_init_event_pool(vhost, &vhost->crq))) {
- dev_err(dev, "Couldn't initialize event pool. rc=%d\n", rc);
- goto release_crq;
- }
-
if ((rc = scsi_add_host(shost, dev)))
- goto release_event_pool;
+ goto release_crq;
fc_host_dev_loss_tmo(shost) = IBMVFC_DEV_LOSS_TMO;
@@ -5362,8 +5363,6 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
remove_shost:
scsi_remove_host(shost);
-release_event_pool:
- ibmvfc_free_event_pool(vhost, &vhost->crq);
release_crq:
ibmvfc_release_crq_queue(vhost);
kill_kthread:
@@ -5398,7 +5397,6 @@ static int ibmvfc_remove(struct vio_dev *vdev)
spin_unlock_irqrestore(vhost->host->host_lock, flags);
ibmvfc_wait_while_resetting(vhost);
- ibmvfc_release_crq_queue(vhost);
kthread_stop(vhost->work_thread);
fc_remove_host(vhost->host);
scsi_remove_host(vhost->host);
@@ -5408,7 +5406,7 @@ static int ibmvfc_remove(struct vio_dev *vdev)
list_splice_init(&vhost->purge, &purge);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
ibmvfc_complete_purge(&purge);
- ibmvfc_free_event_pool(vhost, &vhost->crq);
+ ibmvfc_release_crq_queue(vhost);
ibmvfc_free_mem(vhost);
spin_lock(&ibmvfc_driver_lock);
--
2.27.0
^ permalink raw reply related
* [PATCH v5 11/21] ibmvfc: map/request irq and register Sub-CRQ interrupt handler
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Create an irq mapping for the hw_irq number provided from phyp firmware.
Request an irq assigned our Sub-CRQ interrupt handler. Unmap these irqs
at Sub-CRQ teardown.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 51bcafad9490..d3d7c6b53d4f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5292,12 +5292,34 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
goto reg_failed;
}
+ scrq->irq = irq_create_mapping(NULL, scrq->hw_irq);
+
+ if (!scrq->irq) {
+ rc = -EINVAL;
+ dev_err(dev, "Error mapping sub-crq[%d] irq\n", index);
+ goto irq_failed;
+ }
+
+ snprintf(scrq->name, sizeof(scrq->name), "ibmvfc-%x-scsi%d",
+ vdev->unit_address, index);
+ rc = request_irq(scrq->irq, ibmvfc_interrupt_scsi, 0, scrq->name, scrq);
+
+ if (rc) {
+ dev_err(dev, "Couldn't register sub-crq[%d] irq\n", index);
+ irq_dispose_mapping(scrq->irq);
+ goto irq_failed;
+ }
+
scrq->hwq_id = index;
scrq->vhost = vhost;
LEAVE;
return 0;
+irq_failed:
+ do {
+ plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
+ } while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
reg_failed:
ibmvfc_free_queue(vhost, scrq);
LEAVE;
@@ -5313,6 +5335,9 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
ENTER;
+ free_irq(scrq->irq, scrq);
+ irq_dispose_mapping(scrq->irq);
+
do {
rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address,
scrq->cookie);
--
2.27.0
^ permalink raw reply related
* [PATCH v5 16/21] ibmvfc: register Sub-CRQ handles with VIOS during channel setup
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
If the ibmvfc client adapter requests channels it must submit a number
of Sub-CRQ handles matching the number of channels being requested. The
VIOS in its response will overwrite the actual number of channel
resources allocated which may be less than what was requested. The
client then must store the VIOS Sub-CRQ handle for each queue. This VIOS
handle is needed as a parameter with h_send_sub_crq().
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 865b87881d86..578e27180f10 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4627,15 +4627,35 @@ static void ibmvfc_discover_targets(struct ibmvfc_host *vhost)
static void ibmvfc_channel_setup_done(struct ibmvfc_event *evt)
{
struct ibmvfc_host *vhost = evt->vhost;
+ struct ibmvfc_channel_setup *setup = vhost->channel_setup_buf;
+ struct ibmvfc_scsi_channels *scrqs = &vhost->scsi_scrqs;
u32 mad_status = be16_to_cpu(evt->xfer_iu->channel_setup.common.status);
int level = IBMVFC_DEFAULT_LOG_LEVEL;
+ int flags, active_queues, i;
ibmvfc_free_event(evt);
switch (mad_status) {
case IBMVFC_MAD_SUCCESS:
ibmvfc_dbg(vhost, "Channel Setup succeded\n");
+ flags = be32_to_cpu(setup->flags);
vhost->do_enquiry = 0;
+ active_queues = be32_to_cpu(setup->num_scsi_subq_channels);
+ scrqs->active_queues = active_queues;
+
+ if (flags & IBMVFC_CHANNELS_CANCELED) {
+ ibmvfc_dbg(vhost, "Channels Canceled\n");
+ vhost->using_channels = 0;
+ } else {
+ if (active_queues)
+ vhost->using_channels = 1;
+ for (i = 0; i < active_queues; i++)
+ scrqs->scrqs[i].vios_cookie =
+ be64_to_cpu(setup->channel_handles[i]);
+
+ ibmvfc_dbg(vhost, "Using %u channels\n",
+ vhost->scsi_scrqs.active_queues);
+ }
break;
case IBMVFC_MAD_FAILED:
level += ibmvfc_retry_host_init(vhost);
@@ -4659,9 +4679,19 @@ static void ibmvfc_channel_setup(struct ibmvfc_host *vhost)
struct ibmvfc_channel_setup_mad *mad;
struct ibmvfc_channel_setup *setup_buf = vhost->channel_setup_buf;
struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq);
+ struct ibmvfc_scsi_channels *scrqs = &vhost->scsi_scrqs;
+ unsigned int num_channels =
+ min(vhost->client_scsi_channels, vhost->max_vios_scsi_channels);
+ int i;
memset(setup_buf, 0, sizeof(*setup_buf));
- setup_buf->flags = cpu_to_be32(IBMVFC_CANCEL_CHANNELS);
+ if (num_channels == 0)
+ setup_buf->flags = cpu_to_be32(IBMVFC_CANCEL_CHANNELS);
+ else {
+ setup_buf->num_scsi_subq_channels = cpu_to_be32(num_channels);
+ for (i = 0; i < num_channels; i++)
+ setup_buf->channel_handles[i] = cpu_to_be64(scrqs->scrqs[i].cookie);
+ }
ibmvfc_init_event(evt, ibmvfc_channel_setup_done, IBMVFC_MAD_FORMAT);
mad = &evt->iu.channel_setup;
--
2.27.0
^ permalink raw reply related
* [PATCH v5 12/21] ibmvfc: implement channel enquiry and setup commands
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
New NPIV_ENQUIRY_CHANNEL and NPIV_SETUP_CHANNEL management datagrams
(MADs) were defined in a previous patchset. If the client advertises a
desire to use channels and the partner VIOS is channel capable then the
client must proceed with channel enquiry to determine the maximum number
of channels the VIOS is capable of providing, and registering SubCRQs
via channel setup with the VIOS immediately following NPIV Login. This
handshaking should not be performed for subsequent NPIV Logins unless
the CRQ connection has been reset.
Implement these two new MADs and issue them following a successful NPIV
login where the VIOS has set the SUPPORT_CHANNELS capability bit in the
NPIV Login response.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 135 ++++++++++++++++++++++++++++++++-
drivers/scsi/ibmvscsi/ibmvfc.h | 3 +
2 files changed, 136 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index d3d7c6b53d4f..a00f38558613 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -909,6 +909,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
spin_lock(vhost->crq.q_lock);
vhost->state = IBMVFC_NO_CRQ;
vhost->logged_in = 0;
+ vhost->do_enquiry = 1;
+ vhost->using_channels = 0;
/* Clean out the queue */
memset(crq->msgs.crq, 0, PAGE_SIZE);
@@ -4586,6 +4588,118 @@ static void ibmvfc_discover_targets(struct ibmvfc_host *vhost)
ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
}
+static void ibmvfc_channel_setup_done(struct ibmvfc_event *evt)
+{
+ struct ibmvfc_host *vhost = evt->vhost;
+ u32 mad_status = be16_to_cpu(evt->xfer_iu->channel_setup.common.status);
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
+
+ ibmvfc_free_event(evt);
+
+ switch (mad_status) {
+ case IBMVFC_MAD_SUCCESS:
+ ibmvfc_dbg(vhost, "Channel Setup succeded\n");
+ vhost->do_enquiry = 0;
+ break;
+ case IBMVFC_MAD_FAILED:
+ level += ibmvfc_retry_host_init(vhost);
+ ibmvfc_log(vhost, level, "Channel Setup failed\n");
+ fallthrough;
+ case IBMVFC_MAD_DRIVER_FAILED:
+ return;
+ default:
+ dev_err(vhost->dev, "Invalid Channel Setup response: 0x%x\n",
+ mad_status);
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ return;
+ }
+
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+ wake_up(&vhost->work_wait_q);
+}
+
+static void ibmvfc_channel_setup(struct ibmvfc_host *vhost)
+{
+ struct ibmvfc_channel_setup_mad *mad;
+ struct ibmvfc_channel_setup *setup_buf = vhost->channel_setup_buf;
+ struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq);
+
+ memset(setup_buf, 0, sizeof(*setup_buf));
+ setup_buf->flags = cpu_to_be32(IBMVFC_CANCEL_CHANNELS);
+
+ ibmvfc_init_event(evt, ibmvfc_channel_setup_done, IBMVFC_MAD_FORMAT);
+ mad = &evt->iu.channel_setup;
+ memset(mad, 0, sizeof(*mad));
+ mad->common.version = cpu_to_be32(1);
+ mad->common.opcode = cpu_to_be32(IBMVFC_CHANNEL_SETUP);
+ mad->common.length = cpu_to_be16(sizeof(*mad));
+ mad->buffer.va = cpu_to_be64(vhost->channel_setup_dma);
+ mad->buffer.len = cpu_to_be32(sizeof(*vhost->channel_setup_buf));
+
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
+
+ if (!ibmvfc_send_event(evt, vhost, default_timeout))
+ ibmvfc_dbg(vhost, "Sent channel setup\n");
+ else
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+}
+
+static void ibmvfc_channel_enquiry_done(struct ibmvfc_event *evt)
+{
+ struct ibmvfc_host *vhost = evt->vhost;
+ struct ibmvfc_channel_enquiry *rsp = &evt->xfer_iu->channel_enquiry;
+ u32 mad_status = be16_to_cpu(rsp->common.status);
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
+
+ switch (mad_status) {
+ case IBMVFC_MAD_SUCCESS:
+ ibmvfc_dbg(vhost, "Channel Enquiry succeeded\n");
+ vhost->max_vios_scsi_channels = be32_to_cpu(rsp->num_scsi_subq_channels);
+ ibmvfc_free_event(evt);
+ break;
+ case IBMVFC_MAD_FAILED:
+ level += ibmvfc_retry_host_init(vhost);
+ ibmvfc_log(vhost, level, "Channel Enquiry failed\n");
+ fallthrough;
+ case IBMVFC_MAD_DRIVER_FAILED:
+ ibmvfc_free_event(evt);
+ return;
+ default:
+ dev_err(vhost->dev, "Invalid Channel Enquiry response: 0x%x\n",
+ mad_status);
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ ibmvfc_free_event(evt);
+ return;
+ }
+
+ ibmvfc_channel_setup(vhost);
+}
+
+static void ibmvfc_channel_enquiry(struct ibmvfc_host *vhost)
+{
+ struct ibmvfc_channel_enquiry *mad;
+ struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq);
+
+ ibmvfc_init_event(evt, ibmvfc_channel_enquiry_done, IBMVFC_MAD_FORMAT);
+ mad = &evt->iu.channel_enquiry;
+ memset(mad, 0, sizeof(*mad));
+ mad->common.version = cpu_to_be32(1);
+ mad->common.opcode = cpu_to_be32(IBMVFC_CHANNEL_ENQUIRY);
+ mad->common.length = cpu_to_be16(sizeof(*mad));
+
+ if (IBMVFC_MIG_NO_SUB_TO_CRQ)
+ mad->flags |= cpu_to_be32(IBMVFC_NO_CHANNELS_TO_CRQ_SUPPORT);
+ if (IBMVFC_MIG_NO_N_TO_M)
+ mad->flags |= cpu_to_be32(IBMVFC_NO_N_TO_M_CHANNELS_SUPPORT);
+
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
+
+ if (!ibmvfc_send_event(evt, vhost, default_timeout))
+ ibmvfc_dbg(vhost, "Send channel enquiry\n");
+ else
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+}
+
/**
* ibmvfc_npiv_login_done - Completion handler for NPIV Login
* @evt: ibmvfc event struct
@@ -4667,8 +4781,14 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt)
vhost->host->can_queue = be32_to_cpu(rsp->max_cmds) - IBMVFC_NUM_INTERNAL_REQ;
vhost->host->max_sectors = npiv_max_sectors;
- ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
- wake_up(&vhost->work_wait_q);
+
+ if (ibmvfc_check_caps(vhost, IBMVFC_CAN_SUPPORT_CHANNELS) && vhost->do_enquiry) {
+ ibmvfc_channel_enquiry(vhost);
+ } else {
+ vhost->do_enquiry = 0;
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+ wake_up(&vhost->work_wait_q);
+ }
}
/**
@@ -5477,9 +5597,20 @@ static int ibmvfc_alloc_mem(struct ibmvfc_host *vhost)
goto free_trace;
}
+ vhost->channel_setup_buf = dma_alloc_coherent(dev, sizeof(*vhost->channel_setup_buf),
+ &vhost->channel_setup_dma,
+ GFP_KERNEL);
+
+ if (!vhost->channel_setup_buf) {
+ dev_err(dev, "Couldn't allocate Channel Setup buffer\n");
+ goto free_tgt_pool;
+ }
+
LEAVE;
return 0;
+free_tgt_pool:
+ mempool_destroy(vhost->tgt_pool);
free_trace:
kfree(vhost->trace);
free_disc_buffer:
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index bdafe9956649..3d76cd3c1fd9 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -854,10 +854,13 @@ struct ibmvfc_host {
struct ibmvfc_npiv_login login_info;
union ibmvfc_npiv_login_data *login_buf;
dma_addr_t login_buf_dma;
+ struct ibmvfc_channel_setup *channel_setup_buf;
+ dma_addr_t channel_setup_dma;
int disc_buf_sz;
int log_level;
struct ibmvfc_discover_targets_entry *disc_buf;
struct mutex passthru_mutex;
+ int max_vios_scsi_channels;
int task_set;
int init_retries;
int discovery_threads;
--
2.27.0
^ permalink raw reply related
* [PATCH v5 13/21] ibmvfc: advertise client support for using hardware channels
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Previous patches have plumbed the necessary Sub-CRQ interface and
channel negotiation MADs to fully channelize via hardware backed queues.
Advertise client support via NPIV Login capability
IBMVFC_CAN_USE_CHANNELS when the client bits have MQ enabled via
vhost->mq_enabled, or when channels were already in use during a
subsequent NPIV Login. The later is required because channel support is
only renegotiated after a CRQ pair is broken. Simple NPIV Logout/Logins
require the client to continue to advertise the channel capability until
the CRQ pair between the client is broken.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a00f38558613..0653d52d4ea0 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1410,6 +1410,10 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost)
login_info->max_cmds = cpu_to_be32(max_requests + IBMVFC_NUM_INTERNAL_REQ);
login_info->capabilities = cpu_to_be64(IBMVFC_CAN_MIGRATE | IBMVFC_CAN_SEND_VF_WWPN);
+
+ if (vhost->mq_enabled || vhost->using_channels)
+ login_info->capabilities |= cpu_to_be64(IBMVFC_CAN_USE_CHANNELS);
+
login_info->async.va = cpu_to_be64(vhost->async_crq.msg_token);
login_info->async.len = cpu_to_be32(async_crq->size *
sizeof(*async_crq->msgs.async));
--
2.27.0
^ permalink raw reply related
* [PATCH v5 15/21] ibmvfc: send commands down HW Sub-CRQ when channelized
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
When the client has negotiated the use of channels all vfcFrames are
required to go down a Sub-CRQ channel or it is a protocoal violation. If
the adapter state is channelized submit vfcFrames to the appropriate
Sub-CRQ via the h_send_sub_crq() helper.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 39 ++++++++++++++++++++++++++++------
1 file changed, 33 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 3f3cc37a263f..865b87881d86 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -704,6 +704,15 @@ static int ibmvfc_send_crq(struct ibmvfc_host *vhost, u64 word1, u64 word2)
return plpar_hcall_norets(H_SEND_CRQ, vdev->unit_address, word1, word2);
}
+static int ibmvfc_send_sub_crq(struct ibmvfc_host *vhost, u64 cookie, u64 word1,
+ u64 word2, u64 word3, u64 word4)
+{
+ struct vio_dev *vdev = to_vio_dev(vhost->dev);
+
+ return plpar_hcall_norets(H_SEND_SUB_CRQ, vdev->unit_address, cookie,
+ word1, word2, word3, word4);
+}
+
/**
* ibmvfc_send_crq_init - Send a CRQ init message
* @vhost: ibmvfc host struct
@@ -1623,8 +1632,17 @@ static int ibmvfc_send_event(struct ibmvfc_event *evt,
mb();
- if ((rc = ibmvfc_send_crq(vhost, be64_to_cpu(crq_as_u64[0]),
- be64_to_cpu(crq_as_u64[1])))) {
+ if (evt->queue->fmt == IBMVFC_SUB_CRQ_FMT)
+ rc = ibmvfc_send_sub_crq(vhost,
+ evt->queue->vios_cookie,
+ be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]),
+ 0, 0);
+ else
+ rc = ibmvfc_send_crq(vhost, be64_to_cpu(crq_as_u64[0]),
+ be64_to_cpu(crq_as_u64[1]));
+
+ if (rc) {
list_del(&evt->queue_list);
spin_unlock_irqrestore(&evt->queue->l_lock, flags);
del_timer(&evt->timer);
@@ -1842,6 +1860,7 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
struct ibmvfc_event *evt;
u32 tag_and_hwq = blk_mq_unique_tag(cmnd->request);
u16 hwq = blk_mq_unique_tag_to_hwq(tag_and_hwq);
+ u16 scsi_channel;
int rc;
if (unlikely((rc = fc_remote_port_chkready(rport))) ||
@@ -1852,7 +1871,13 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
cmnd->result = (DID_OK << 16);
- evt = ibmvfc_get_event(&vhost->crq);
+ if (vhost->using_channels) {
+ scsi_channel = hwq % vhost->scsi_scrqs.active_queues;
+ evt = ibmvfc_get_event(&vhost->scsi_scrqs.scrqs[scsi_channel]);
+ evt->hwq = hwq % vhost->scsi_scrqs.active_queues;
+ } else
+ evt = ibmvfc_get_event(&vhost->crq);
+
ibmvfc_init_event(evt, ibmvfc_scsi_done, IBMVFC_CMD_FORMAT);
evt->cmnd = cmnd;
@@ -1868,8 +1893,6 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
vfc_cmd->correlation = cpu_to_be64((u64)evt);
- if (vhost->using_channels)
- evt->hwq = hwq % vhost->scsi_scrqs.active_queues;
if (likely(!(rc = ibmvfc_map_sg_data(cmnd, evt, vfc_cmd, vhost->dev))))
return ibmvfc_send_event(evt, vhost, 0);
@@ -2200,7 +2223,11 @@ static int ibmvfc_reset_device(struct scsi_device *sdev, int type, char *desc)
spin_lock_irqsave(vhost->host->host_lock, flags);
if (vhost->state == IBMVFC_ACTIVE) {
- evt = ibmvfc_get_event(&vhost->crq);
+ if (vhost->using_channels)
+ evt = ibmvfc_get_event(&vhost->scsi_scrqs.scrqs[0]);
+ else
+ evt = ibmvfc_get_event(&vhost->crq);
+
ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT);
tmf = ibmvfc_init_vfc_cmd(evt, sdev);
iu = ibmvfc_get_fcp_iu(vhost, tmf);
--
2.27.0
^ permalink raw reply related
* [PATCH v5 21/21] ibmvfc: provide modules parameters for MQ settings
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel, brking,
linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Add the various module parameter toggles for adjusting the MQ
characteristics at boot/load time as well as a device attribute for
changing the client scsi channel request amount.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 75 ++++++++++++++++++++++++++++++----
drivers/scsi/ibmvscsi/ibmvfc.h | 1 +
2 files changed, 67 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index d314dffaafc4..7097028d4cb6 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -40,6 +40,12 @@ static unsigned int disc_threads = IBMVFC_MAX_DISC_THREADS;
static unsigned int ibmvfc_debug = IBMVFC_DEBUG;
static unsigned int log_level = IBMVFC_DEFAULT_LOG_LEVEL;
static unsigned int cls3_error = IBMVFC_CLS3_ERROR;
+static unsigned int mq_enabled = IBMVFC_MQ;
+static unsigned int nr_scsi_hw_queues = IBMVFC_SCSI_HW_QUEUES;
+static unsigned int nr_scsi_channels = IBMVFC_SCSI_CHANNELS;
+static unsigned int mig_channels_only = IBMVFC_MIG_NO_SUB_TO_CRQ;
+static unsigned int mig_no_less_channels = IBMVFC_MIG_NO_N_TO_M;
+
static LIST_HEAD(ibmvfc_head);
static DEFINE_SPINLOCK(ibmvfc_driver_lock);
static struct scsi_transport_template *ibmvfc_transport_template;
@@ -49,6 +55,22 @@ MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(IBMVFC_DRIVER_VERSION);
+module_param_named(mq, mq_enabled, uint, S_IRUGO);
+MODULE_PARM_DESC(mq, "Enable multiqueue support. "
+ "[Default=" __stringify(IBMVFC_MQ) "]");
+module_param_named(scsi_host_queues, nr_scsi_hw_queues, uint, S_IRUGO);
+MODULE_PARM_DESC(scsi_host_queues, "Number of SCSI Host submission queues. "
+ "[Default=" __stringify(IBMVFC_SCSI_HW_QUEUES) "]");
+module_param_named(scsi_hw_channels, nr_scsi_channels, uint, S_IRUGO);
+MODULE_PARM_DESC(scsi_hw_channels, "Number of hw scsi channels to request. "
+ "[Default=" __stringify(IBMVFC_SCSI_CHANNELS) "]");
+module_param_named(mig_channels_only, mig_channels_only, uint, S_IRUGO);
+MODULE_PARM_DESC(mig_channels_only, "Prevent migration to non-channelized system. "
+ "[Default=" __stringify(IBMVFC_MIG_NO_SUB_TO_CRQ) "]");
+module_param_named(mig_no_less_channels, mig_no_less_channels, uint, S_IRUGO);
+MODULE_PARM_DESC(mig_no_less_channels, "Prevent migration to system with less channels. "
+ "[Default=" __stringify(IBMVFC_MIG_NO_N_TO_M) "]");
+
module_param_named(init_timeout, init_timeout, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds. "
"[Default=" __stringify(IBMVFC_INIT_TIMEOUT) "]");
@@ -926,7 +948,7 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
crq->cur = 0;
if (vhost->scsi_scrqs.scrqs) {
- for (i = 0; i < IBMVFC_SCSI_HW_QUEUES; i++) {
+ for (i = 0; i < nr_scsi_hw_queues; i++) {
scrq = &vhost->scsi_scrqs.scrqs[i];
spin_lock(scrq->q_lock);
memset(scrq->msgs.scrq, 0, PAGE_SIZE);
@@ -3397,6 +3419,37 @@ static ssize_t ibmvfc_store_log_level(struct device *dev,
return strlen(buf);
}
+static ssize_t ibmvfc_show_scsi_channels(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ibmvfc_host *vhost = shost_priv(shost);
+ unsigned long flags = 0;
+ int len;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ len = snprintf(buf, PAGE_SIZE, "%d\n", vhost->client_scsi_channels);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ return len;
+}
+
+static ssize_t ibmvfc_store_scsi_channels(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ibmvfc_host *vhost = shost_priv(shost);
+ unsigned long flags = 0;
+ unsigned int channels;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ channels = simple_strtoul(buf, NULL, 10);
+ vhost->client_scsi_channels = min(channels, nr_scsi_hw_queues);
+ ibmvfc_hard_reset_host(vhost);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ return strlen(buf);
+}
+
static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL);
static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL);
static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
@@ -3405,6 +3458,8 @@ static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL);
static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL);
static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR,
ibmvfc_show_log_level, ibmvfc_store_log_level);
+static DEVICE_ATTR(nr_scsi_channels, S_IRUGO | S_IWUSR,
+ ibmvfc_show_scsi_channels, ibmvfc_store_scsi_channels);
#ifdef CONFIG_SCSI_IBMVFC_TRACE
/**
@@ -3461,6 +3516,7 @@ static struct device_attribute *ibmvfc_attrs[] = {
&dev_attr_npiv_version,
&dev_attr_capabilities,
&dev_attr_log_level,
+ &dev_attr_nr_scsi_channels,
NULL
};
@@ -4866,9 +4922,9 @@ static void ibmvfc_channel_enquiry(struct ibmvfc_host *vhost)
mad->common.opcode = cpu_to_be32(IBMVFC_CHANNEL_ENQUIRY);
mad->common.length = cpu_to_be16(sizeof(*mad));
- if (IBMVFC_MIG_NO_SUB_TO_CRQ)
+ if (mig_channels_only)
mad->flags |= cpu_to_be32(IBMVFC_NO_CHANNELS_TO_CRQ_SUPPORT);
- if (IBMVFC_MIG_NO_N_TO_M)
+ if (mig_no_less_channels)
mad->flags |= cpu_to_be32(IBMVFC_NO_N_TO_M_CHANNELS_SUPPORT);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
@@ -5655,13 +5711,13 @@ static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
ENTER;
- vhost->scsi_scrqs.scrqs = kcalloc(IBMVFC_SCSI_HW_QUEUES,
+ vhost->scsi_scrqs.scrqs = kcalloc(nr_scsi_hw_queues,
sizeof(*vhost->scsi_scrqs.scrqs),
GFP_KERNEL);
if (!vhost->scsi_scrqs.scrqs)
return -1;
- for (i = 0; i < IBMVFC_SCSI_HW_QUEUES; i++) {
+ for (i = 0; i < nr_scsi_hw_queues; i++) {
if (ibmvfc_register_scsi_channel(vhost, i)) {
for (j = i; j > 0; j--)
ibmvfc_deregister_scsi_channel(vhost, j - 1);
@@ -5685,7 +5741,7 @@ static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost)
if (!vhost->scsi_scrqs.scrqs)
return;
- for (i = 0; i < IBMVFC_SCSI_HW_QUEUES; i++)
+ for (i = 0; i < nr_scsi_hw_queues; i++)
ibmvfc_deregister_scsi_channel(vhost, i);
kfree(vhost->scsi_scrqs.scrqs);
@@ -5873,6 +5929,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
struct Scsi_Host *shost;
struct device *dev = &vdev->dev;
int rc = -ENOMEM;
+ unsigned int max_scsi_queues = IBMVFC_MAX_SCSI_QUEUES;
ENTER;
shost = scsi_host_alloc(&driver_template, sizeof(*vhost));
@@ -5888,7 +5945,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
shost->max_sectors = IBMVFC_MAX_SECTORS;
shost->max_cmd_len = IBMVFC_MAX_CDB_LEN;
shost->unique_id = shost->host_no;
- shost->nr_hw_queues = IBMVFC_MQ ? IBMVFC_SCSI_HW_QUEUES : 1;
+ shost->nr_hw_queues = mq_enabled ? min(max_scsi_queues, nr_scsi_hw_queues) : 1;
vhost = shost_priv(shost);
INIT_LIST_HEAD(&vhost->targets);
@@ -5900,8 +5957,8 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
vhost->log_level = log_level;
vhost->task_set = 1;
- vhost->mq_enabled = IBMVFC_MQ;
- vhost->client_scsi_channels = IBMVFC_SCSI_CHANNELS;
+ vhost->mq_enabled = mq_enabled;
+ vhost->client_scsi_channels = min(shost->nr_hw_queues, nr_scsi_channels);
vhost->using_channels = 0;
vhost->do_enquiry = 1;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 0391cb746d0b..19dcec3ae9ba 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -43,6 +43,7 @@
#define IBMVFC_CLS3_ERROR 0
#define IBMVFC_MQ 1
#define IBMVFC_SCSI_CHANNELS 8
+#define IBMVFC_MAX_SCSI_QUEUES 16
#define IBMVFC_SCSI_HW_QUEUES 8
#define IBMVFC_MIG_NO_SUB_TO_CRQ 0
#define IBMVFC_MIG_NO_N_TO_M 0
--
2.27.0
^ permalink raw reply related
* [PATCH v5 19/21] ibmvfc: purge scsi channels after transport loss/reset
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Grab the queue and list lock for each Sub-CRQ and add any uncompleted
events to the host purge list.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 5ca8fcafd1d5..d314dffaafc4 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1056,7 +1056,13 @@ static void ibmvfc_fail_request(struct ibmvfc_event *evt, int error_code)
static void ibmvfc_purge_requests(struct ibmvfc_host *vhost, int error_code)
{
struct ibmvfc_event *evt, *pos;
+ struct ibmvfc_queue *queues = vhost->scsi_scrqs.scrqs;
unsigned long flags;
+ int hwqs = 0;
+ int i;
+
+ if (vhost->using_channels)
+ hwqs = vhost->scsi_scrqs.active_queues;
ibmvfc_dbg(vhost, "Purging all requests\n");
spin_lock_irqsave(&vhost->crq.l_lock, flags);
@@ -1064,6 +1070,16 @@ static void ibmvfc_purge_requests(struct ibmvfc_host *vhost, int error_code)
ibmvfc_fail_request(evt, error_code);
list_splice_init(&vhost->crq.sent, &vhost->purge);
spin_unlock_irqrestore(&vhost->crq.l_lock, flags);
+
+ for (i = 0; i < hwqs; i++) {
+ spin_lock_irqsave(queues[i].q_lock, flags);
+ spin_lock(&queues[i].l_lock);
+ list_for_each_entry_safe(evt, pos, &queues[i].sent, queue_list)
+ ibmvfc_fail_request(evt, error_code);
+ list_splice_init(&queues[i].sent, &vhost->purge);
+ spin_unlock(&queues[i].l_lock);
+ spin_unlock_irqrestore(queues[i].q_lock, flags);
+ }
}
/**
--
2.27.0
^ permalink raw reply related
* [PATCH v5 20/21] ibmvfc: enable MQ and set reasonable defaults
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Turn on MQ by default and set sane values for the upper limit on hw
queues for the scsi host, and number of hw scsi channels to request from
the partner VIOS.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index c3bb83c9d8a6..0391cb746d0b 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -41,9 +41,9 @@
#define IBMVFC_DEFAULT_LOG_LEVEL 2
#define IBMVFC_MAX_CDB_LEN 16
#define IBMVFC_CLS3_ERROR 0
-#define IBMVFC_MQ 0
-#define IBMVFC_SCSI_CHANNELS 0
-#define IBMVFC_SCSI_HW_QUEUES 1
+#define IBMVFC_MQ 1
+#define IBMVFC_SCSI_CHANNELS 8
+#define IBMVFC_SCSI_HW_QUEUES 8
#define IBMVFC_MIG_NO_SUB_TO_CRQ 0
#define IBMVFC_MIG_NO_N_TO_M 0
--
2.27.0
^ permalink raw reply related
* [PATCH v5 14/21] ibmvfc: set and track hw queue in ibmvfc_event struct
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Extract the hwq id from a SCSI command and store it in the ibmvfc_event
structure to identify which Sub-CRQ to send the command down when
channels are being utilized.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 5 +++++
drivers/scsi/ibmvscsi/ibmvfc.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 0653d52d4ea0..3f3cc37a263f 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1483,6 +1483,7 @@ static void ibmvfc_init_event(struct ibmvfc_event *evt,
evt->_done = done;
evt->done = ibmvfc_locked_done;
}
+ evt->hwq = 0;
}
/**
@@ -1839,6 +1840,8 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
struct ibmvfc_cmd *vfc_cmd;
struct ibmvfc_fcp_cmd_iu *iu;
struct ibmvfc_event *evt;
+ u32 tag_and_hwq = blk_mq_unique_tag(cmnd->request);
+ u16 hwq = blk_mq_unique_tag_to_hwq(tag_and_hwq);
int rc;
if (unlikely((rc = fc_remote_port_chkready(rport))) ||
@@ -1865,6 +1868,8 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
vfc_cmd->correlation = cpu_to_be64((u64)evt);
+ if (vhost->using_channels)
+ evt->hwq = hwq % vhost->scsi_scrqs.active_queues;
if (likely(!(rc = ibmvfc_map_sg_data(cmnd, evt, vfc_cmd, vhost->dev))))
return ibmvfc_send_event(evt, vhost, 0);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 3d76cd3c1fd9..2dbce7071409 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -753,6 +753,7 @@ struct ibmvfc_event {
struct completion comp;
struct completion *eh_comp;
struct timer_list timer;
+ u16 hwq;
};
/* a pool of event structs for use */
--
2.27.0
^ permalink raw reply related
* [PATCH v5 18/21] ibmvfc: send Cancel MAD down each hw scsi channel
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel, brking,
linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
In general the client needs to send Cancel MADs and task management
commands down the same channel as the command(s) intended to cancel or
abort. The client assigns cancel keys per LUN and thus must send a
Cancel down each channel commands were submitted for that LUN. Further,
the client then must wait for those cancel completions prior to
submitting a LUN RESET or ABORT TASK SET.
Add a cancel rsp iu syncronization field to the ibmvfc_queue struct such
that the cancel routine can sync the cancel response to each queue that
requires a cancel command. Build a list of each cancel event sent and
wait for the completion of each submitted cancel.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 109 +++++++++++++++++++++++++++++----
drivers/scsi/ibmvscsi/ibmvfc.h | 3 +
2 files changed, 100 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index b0b0212344f3..5ca8fcafd1d5 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2418,18 +2418,82 @@ static struct ibmvfc_event *ibmvfc_init_tmf(struct ibmvfc_queue *queue,
return evt;
}
-/**
- * ibmvfc_cancel_all - Cancel all outstanding commands to the device
- * @sdev: scsi device to cancel commands
- * @type: type of error recovery being performed
- *
- * This sends a cancel to the VIOS for the specified device. This does
- * NOT send any abort to the actual device. That must be done separately.
- *
- * Returns:
- * 0 on success / other on failure
- **/
-static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
+static int ibmvfc_cancel_all_mq(struct scsi_device *sdev, int type)
+{
+ struct ibmvfc_host *vhost = shost_priv(sdev->host);
+ struct ibmvfc_event *evt, *found_evt, *temp;
+ struct ibmvfc_queue *queues = vhost->scsi_scrqs.scrqs;
+ unsigned long flags;
+ int num_hwq, i;
+ int fail = 0;
+ LIST_HEAD(cancelq);
+ u16 status;
+
+ ENTER;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ num_hwq = vhost->scsi_scrqs.active_queues;
+ for (i = 0; i < num_hwq; i++) {
+ spin_lock(queues[i].q_lock);
+ spin_lock(&queues[i].l_lock);
+ found_evt = NULL;
+ list_for_each_entry(evt, &queues[i].sent, queue_list) {
+ if (evt->cmnd && evt->cmnd->device == sdev) {
+ found_evt = evt;
+ break;
+ }
+ }
+ spin_unlock(&queues[i].l_lock);
+
+ if (found_evt && vhost->logged_in) {
+ evt = ibmvfc_init_tmf(&queues[i], sdev, type);
+ evt->sync_iu = &queues[i].cancel_rsp;
+ ibmvfc_send_event(evt, vhost, default_timeout);
+ list_add_tail(&evt->cancel, &cancelq);
+ }
+
+ spin_unlock(queues[i].q_lock);
+ }
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+ if (list_empty(&cancelq)) {
+ if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+ sdev_printk(KERN_INFO, sdev, "No events found to cancel\n");
+ return 0;
+ }
+
+ sdev_printk(KERN_INFO, sdev, "Cancelling outstanding commands.\n");
+
+ list_for_each_entry_safe(evt, temp, &cancelq, cancel) {
+ wait_for_completion(&evt->comp);
+ status = be16_to_cpu(evt->queue->cancel_rsp.mad_common.status);
+ list_del(&evt->cancel);
+ ibmvfc_free_event(evt);
+
+ if (status != IBMVFC_MAD_SUCCESS) {
+ sdev_printk(KERN_WARNING, sdev, "Cancel failed with rc=%x\n", status);
+ switch (status) {
+ case IBMVFC_MAD_DRIVER_FAILED:
+ case IBMVFC_MAD_CRQ_ERROR:
+ /* Host adapter most likely going through reset, return success to
+ * the caller will wait for the command being cancelled to get returned
+ */
+ break;
+ default:
+ fail = 1;
+ break;
+ }
+ }
+ }
+
+ if (fail)
+ return -EIO;
+
+ sdev_printk(KERN_INFO, sdev, "Successfully cancelled outstanding commands\n");
+ LEAVE;
+ return 0;
+}
+
+static int ibmvfc_cancel_all_sq(struct scsi_device *sdev, int type)
{
struct ibmvfc_host *vhost = shost_priv(sdev->host);
struct ibmvfc_event *evt, *found_evt;
@@ -2498,6 +2562,27 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
return 0;
}
+/**
+ * ibmvfc_cancel_all - Cancel all outstanding commands to the device
+ * @sdev: scsi device to cancel commands
+ * @type: type of error recovery being performed
+ *
+ * This sends a cancel to the VIOS for the specified device. This does
+ * NOT send any abort to the actual device. That must be done separately.
+ *
+ * Returns:
+ * 0 on success / other on failure
+ **/
+static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
+{
+ struct ibmvfc_host *vhost = shost_priv(sdev->host);
+
+ if (vhost->mq_enabled && vhost->using_channels)
+ return ibmvfc_cancel_all_mq(sdev, type);
+ else
+ return ibmvfc_cancel_all_sq(sdev, type);
+}
+
/**
* ibmvfc_match_key - Match function for specified cancel key
* @evt: ibmvfc event struct
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 2dbce7071409..c3bb83c9d8a6 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -737,6 +737,7 @@ struct ibmvfc_target {
/* a unit of work for the hosting partition */
struct ibmvfc_event {
struct list_head queue_list;
+ struct list_head cancel;
struct ibmvfc_host *vhost;
struct ibmvfc_queue *queue;
struct ibmvfc_target *tgt;
@@ -790,6 +791,8 @@ struct ibmvfc_queue {
struct list_head free;
spinlock_t l_lock;
+ union ibmvfc_iu cancel_rsp;
+
/* Sub-CRQ fields */
struct ibmvfc_host *vhost;
unsigned long cookie;
--
2.27.0
^ permalink raw reply related
* [PATCH v5 10/21] ibmvfc: define Sub-CRQ interrupt handler routine
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Simple handler that calls Sub-CRQ drain routine directly.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index f3cd092478ee..51bcafad9490 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3571,6 +3571,16 @@ static void ibmvfc_drain_sub_crq(struct ibmvfc_queue *scrq)
}
}
+static irqreturn_t ibmvfc_interrupt_scsi(int irq, void *scrq_instance)
+{
+ struct ibmvfc_queue *scrq = (struct ibmvfc_queue *)scrq_instance;
+
+ ibmvfc_toggle_scrq_irq(scrq, 0);
+ ibmvfc_drain_sub_crq(scrq);
+
+ return IRQ_HANDLED;
+}
+
/**
* ibmvfc_init_tgt - Set the next init job step for the target
* @tgt: ibmvfc target struct
--
2.27.0
^ permalink raw reply related
* [PATCH v5 17/21] ibmvfc: add cancel mad initialization helper
From: Tyrel Datwyler @ 2021-01-14 20:31 UTC (permalink / raw)
To: james.bottomley
Cc: Tyrel Datwyler, martin.petersen, linux-scsi, linux-kernel,
Brian King, brking, linuxppc-dev
In-Reply-To: <20210114203148.246656-1-tyreld@linux.ibm.com>
Add a helper routine for initializing a Cancel MAD. This will be useful
for a channelized client that needs to send Cancel commands down every
channel commands were sent for a particular LUN.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 68 ++++++++++++++++++++--------------
1 file changed, 40 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 578e27180f10..b0b0212344f3 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2379,6 +2379,45 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
return SUCCESS;
}
+static struct ibmvfc_event *ibmvfc_init_tmf(struct ibmvfc_queue *queue,
+ struct scsi_device *sdev,
+ int type)
+{
+ struct ibmvfc_host *vhost = shost_priv(sdev->host);
+ struct scsi_target *starget = scsi_target(sdev);
+ struct fc_rport *rport = starget_to_rport(starget);
+ struct ibmvfc_event *evt;
+ struct ibmvfc_tmf *tmf;
+
+ evt = ibmvfc_get_event(queue);
+ ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT);
+
+ tmf = &evt->iu.tmf;
+ memset(tmf, 0, sizeof(*tmf));
+ if (ibmvfc_check_caps(vhost, IBMVFC_HANDLE_VF_WWPN)) {
+ tmf->common.version = cpu_to_be32(2);
+ tmf->target_wwpn = cpu_to_be64(rport->port_name);
+ } else {
+ tmf->common.version = cpu_to_be32(1);
+ }
+ tmf->common.opcode = cpu_to_be32(IBMVFC_TMF_MAD);
+ tmf->common.length = cpu_to_be16(sizeof(*tmf));
+ tmf->scsi_id = cpu_to_be64(rport->port_id);
+ int_to_scsilun(sdev->lun, &tmf->lun);
+ if (!ibmvfc_check_caps(vhost, IBMVFC_CAN_SUPPRESS_ABTS))
+ type &= ~IBMVFC_TMF_SUPPRESS_ABTS;
+ if (vhost->state == IBMVFC_ACTIVE)
+ tmf->flags = cpu_to_be32((type | IBMVFC_TMF_LUA_VALID));
+ else
+ tmf->flags = cpu_to_be32(((type & IBMVFC_TMF_SUPPRESS_ABTS) | IBMVFC_TMF_LUA_VALID));
+ tmf->cancel_key = cpu_to_be32((unsigned long)sdev->hostdata);
+ tmf->my_cancel_key = cpu_to_be32((unsigned long)starget->hostdata);
+
+ init_completion(&evt->comp);
+
+ return evt;
+}
+
/**
* ibmvfc_cancel_all - Cancel all outstanding commands to the device
* @sdev: scsi device to cancel commands
@@ -2393,9 +2432,6 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
{
struct ibmvfc_host *vhost = shost_priv(sdev->host);
- struct scsi_target *starget = scsi_target(sdev);
- struct fc_rport *rport = starget_to_rport(starget);
- struct ibmvfc_tmf *tmf;
struct ibmvfc_event *evt, *found_evt;
union ibmvfc_iu rsp;
int rsp_rc = -EBUSY;
@@ -2422,32 +2458,8 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
}
if (vhost->logged_in) {
- evt = ibmvfc_get_event(&vhost->crq);
- ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT);
-
- tmf = &evt->iu.tmf;
- memset(tmf, 0, sizeof(*tmf));
- if (ibmvfc_check_caps(vhost, IBMVFC_HANDLE_VF_WWPN)) {
- tmf->common.version = cpu_to_be32(2);
- tmf->target_wwpn = cpu_to_be64(rport->port_name);
- } else {
- tmf->common.version = cpu_to_be32(1);
- }
- tmf->common.opcode = cpu_to_be32(IBMVFC_TMF_MAD);
- tmf->common.length = cpu_to_be16(sizeof(*tmf));
- tmf->scsi_id = cpu_to_be64(rport->port_id);
- int_to_scsilun(sdev->lun, &tmf->lun);
- if (!ibmvfc_check_caps(vhost, IBMVFC_CAN_SUPPRESS_ABTS))
- type &= ~IBMVFC_TMF_SUPPRESS_ABTS;
- if (vhost->state == IBMVFC_ACTIVE)
- tmf->flags = cpu_to_be32((type | IBMVFC_TMF_LUA_VALID));
- else
- tmf->flags = cpu_to_be32(((type & IBMVFC_TMF_SUPPRESS_ABTS) | IBMVFC_TMF_LUA_VALID));
- tmf->cancel_key = cpu_to_be32((unsigned long)sdev->hostdata);
- tmf->my_cancel_key = cpu_to_be32((unsigned long)starget->hostdata);
-
+ evt = ibmvfc_init_tmf(&vhost->crq, sdev, type);
evt->sync_iu = &rsp;
- init_completion(&evt->comp);
rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
}
--
2.27.0
^ permalink raw reply related
* [PATCH 1/3] tty: hvcs: Drop unnecessary if block
From: Uwe Kleine-König @ 2021-01-14 17:57 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby
Cc: sparclinux, linuxppc-dev, David S . Miller, linux-kernel
In-Reply-To: <20210114175718.137483-1-u.kleine-koenig@pengutronix.de>
If hvcs_probe() succeeded dev_set_drvdata() is called with a non-NULL
value, and if hvcs_probe() failed hvcs_remove() isn't called.
So there is no way dev_get_drvdata() can return NULL in hvcs_remove() and
the check can just go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/tty/hvc/hvcs.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 509d1042825a..3e0461285c34 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -825,9 +825,6 @@ static int hvcs_remove(struct vio_dev *dev)
unsigned long flags;
struct tty_struct *tty;
- if (!hvcsd)
- return -ENODEV;
-
/* By this time the vty-server won't be getting any more interrupts */
spin_lock_irqsave(&hvcsd->lock, flags);
--
2.29.2
^ permalink raw reply related
* Re: [PATCH v2 0/7] Rid W=1 warnings in Ethernet
From: Jakub Kicinski @ 2021-01-14 17:14 UTC (permalink / raw)
To: Lee Jones
Cc: Paul Durrant, Kurt Kanzenbach, Alexei Starovoitov,
Gustavo A. R. Silva, Peter Cammaert, Paul Mackerras,
Sukadev Bhattiprolu, Wei Liu, Daniel Borkmann, John Fastabend,
Santiago Leon, xen-devel, Grygorii Strashko, Thomas Falcon,
Jesper Dangaard Brouer, Jens Osterkamp, Rusty Russell,
Daris A Nevil, Lijun Pan, Ivan Khoronzhuk, Nicolas Pitre,
Geoff Levand, netdev, linux-kernel, Erik Stahlman, John Allen,
Utz Bacher, Dany Madden, bpf, linuxppc-dev, David S. Miller,
Russell King
In-Reply-To: <20210114083349.GI3975472@dell>
On Thu, 14 Jan 2021 08:33:49 +0000 Lee Jones wrote:
> On Wed, 13 Jan 2021, Jakub Kicinski wrote:
>
> > On Wed, 13 Jan 2021 16:41:16 +0000 Lee Jones wrote:
> > > Resending the stragglers again.
> > >
> > > This set is part of a larger effort attempting to clean-up W=1
> > > kernel builds, which are currently overwhelmingly riddled with
> > > niggly little warnings.
> > >
> > > v2:
> > > - Squashed IBM patches
> > > - Fixed real issue in SMSC
> > > - Added Andrew's Reviewed-by tags on remainder
> >
> > Does not apply, please rebase on net-next/master.
>
> These are based on Tuesday's next/master.
What's next/master?
This is net-next:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/
> I just rebased them now with no issue.
>
> What conflict are you seeing?
Applying: net: ethernet: smsc: smc91x: Fix function name in kernel-doc header
error: patch failed: drivers/net/ethernet/smsc/smc91x.c:2192
error: drivers/net/ethernet/smsc/smc91x.c: patch does not apply
Patch failed at 0001 net: ethernet: smsc: smc91x: Fix function name in kernel-doc header
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
^ permalink raw reply
* [PATCH 2/6] powerpc/rtas-proc: remove unused RMO_READ_BUF_MAX
From: Nathan Lynch @ 2021-01-14 22:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
This constant is unused.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
---
arch/powerpc/kernel/rtas-proc.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index e0f8329966d6..d2b0d99824a4 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -755,8 +755,6 @@ static int ppc_rtas_tone_volume_show(struct seq_file *m, void *v)
return 0;
}
-#define RMO_READ_BUF_MAX 30
-
/**
* ppc_rtas_rmo_buf_show() - Describe RTAS-addressable region for user space.
*
--
2.29.2
^ permalink raw reply related
* [PATCH 1/6] powerpc/rtas: improve ppc_rtas_rmo_buf_show documentation
From: Nathan Lynch @ 2021-01-14 21:59 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
Add kerneldoc for ppc_rtas_rmo_buf_show(), the callback for
/proc/powerpc/rtas/rmo_buffer, explaining its expected use.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
---
arch/powerpc/kernel/rtas-proc.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 2d33f342a293..e0f8329966d6 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -757,7 +757,16 @@ static int ppc_rtas_tone_volume_show(struct seq_file *m, void *v)
#define RMO_READ_BUF_MAX 30
-/* RTAS Userspace access */
+/**
+ * ppc_rtas_rmo_buf_show() - Describe RTAS-addressable region for user space.
+ *
+ * Base + size description of a range of RTAS-addressable memory set
+ * aside for user space to use as work area(s) for certain RTAS
+ * functions. User space accesses this region via /dev/mem. Apart from
+ * security policies, the kernel does not arbitrate or serialize
+ * access to this region, and user space must ensure that concurrent
+ * users do not interfere with each other.
+ */
static int ppc_rtas_rmo_buf_show(struct seq_file *m, void *v)
{
seq_printf(m, "%016lx %x\n", rtas_rmo_buf, RTAS_RMOBUF_MAX);
--
2.29.2
^ permalink raw reply related
* [PATCH 3/6] powerpc/rtas: remove ibm_suspend_me_token
From: Nathan Lynch @ 2021-01-14 22:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
There's not a compelling reason to cache the value of the token for
the ibm,suspend-me function. Just look it up when needed in the RTAS
syscall's special case for it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
---
arch/powerpc/kernel/rtas.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index d126d71ea5bd..60fcf7f7b0b8 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -828,7 +828,6 @@ void rtas_activate_firmware(void)
pr_err("ibm,activate-firmware failed (%i)\n", fwrc);
}
-static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
#ifdef CONFIG_PPC_PSERIES
/**
* rtas_call_reentrant() - Used for reentrant rtas calls
@@ -1103,7 +1102,7 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
return -EINVAL;
/* Need to handle ibm,suspend_me call specially */
- if (token == ibm_suspend_me_token) {
+ if (token == rtas_token("ibm,suspend-me")) {
/*
* rtas_ibm_suspend_me assumes the streamid handle is in cpu
@@ -1191,10 +1190,8 @@ void __init rtas_initialize(void)
* the stop-self token if any
*/
#ifdef CONFIG_PPC64
- if (firmware_has_feature(FW_FEATURE_LPAR)) {
+ if (firmware_has_feature(FW_FEATURE_LPAR))
rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX);
- ibm_suspend_me_token = rtas_token("ibm,suspend-me");
- }
#endif
rtas_rmo_buf = memblock_phys_alloc_range(RTAS_RMOBUF_MAX, PAGE_SIZE,
0, rtas_region);
--
2.29.2
^ permalink raw reply related
* [PATCH 4/6] powerpc/rtas: move syscall filter setup into separate function
From: Nathan Lynch @ 2021-01-14 22:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
Reduce conditionally compiled sections within rtas_initialize() by
moving the filter table initialization into its own function already
guarded by CONFIG_PPC_RTAS_FILTER. No behavior change intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
---
arch/powerpc/kernel/rtas.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 60fcf7f7b0b8..55f6aa170e57 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -1051,6 +1051,16 @@ static bool block_rtas_call(int token, int nargs,
return true;
}
+static void __init rtas_syscall_filter_init(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rtas_filters); i++) {
+ rtas_filters[i].token = rtas_token(rtas_filters[i].name);
+ }
+
+}
+
#else
static bool block_rtas_call(int token, int nargs,
@@ -1059,6 +1069,10 @@ static bool block_rtas_call(int token, int nargs,
return false;
}
+static void __init rtas_syscall_filter_init(void)
+{
+}
+
#endif /* CONFIG_PPC_RTAS_FILTER */
/* We assume to be passed big endian arguments */
@@ -1162,9 +1176,6 @@ void __init rtas_initialize(void)
unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
u32 base, size, entry;
int no_base, no_size, no_entry;
-#ifdef CONFIG_PPC_RTAS_FILTER
- int i;
-#endif
/* Get RTAS dev node and fill up our "rtas" structure with infos
* about it.
@@ -1203,11 +1214,7 @@ void __init rtas_initialize(void)
rtas_last_error_token = rtas_token("rtas-last-error");
#endif
-#ifdef CONFIG_PPC_RTAS_FILTER
- for (i = 0; i < ARRAY_SIZE(rtas_filters); i++) {
- rtas_filters[i].token = rtas_token(rtas_filters[i].name);
- }
-#endif
+ rtas_syscall_filter_init();
}
int __init early_init_dt_scan_rtas(unsigned long node,
--
2.29.2
^ permalink raw reply related
* [PATCH 6/6] powerpc/rtas: constrain user region allocation to RMA
From: Nathan Lynch @ 2021-01-14 22:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
Memory locations passed as arguments from the OS to RTAS usually need
to be addressable in 32-bit mode and must reside in the Real Mode
Area. On PAPR guests, the RMA starts at logical address 0 and is the
first logical memory block reported in the LPAR’s device tree.
On powerpc targets with RTAS, Linux makes available to user space a
region of memory suitable for arguments to be passed to RTAS via
sys_rtas(). This region (rtas_rmo_buf) is allocated via the memblock
API during boot in order to ensure that it satisfies the requirements
described above.
With radix MMU, the upper limit supplied to the memblock allocation
can exceed the bounds of the first logical memory block, since
ppc64_rma_size is ULONG_MAX and RTAS_INSTANTIATE_MAX is 1GB. (512MB is
a common size of the first memory block according to a small sample of
LPARs I have checked.) This leads to failures when user space invokes
an RTAS function that uses a work area, such as
ibm,configure-connector.
Alter the determination of the upper limit for rtas_rmo_buf's
allocation to consult the device tree directly, ensuring placement
within the RMA regardless of the MMU in use.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
---
arch/powerpc/kernel/rtas.c | 80 +++++++++++++++++++++++++++++++-------
1 file changed, 65 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index da65faadbbb2..98dfb112f4df 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -1166,6 +1166,70 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
return 0;
}
+/*
+ * Memory locations passed to RTAS must be in the RMA as described by
+ * the range in /memory@0.
+ */
+static phys_addr_t rtas_arg_addr_limit(void)
+{
+ unsigned int addr_cells;
+ unsigned int size_cells;
+ struct device_node *np;
+ const __be32 *prop;
+ u64 limit;
+ u64 base;
+
+ /* RTAS is instantiated in 32-bit mode. */
+ limit = 1ULL << 32;
+
+ /* Account for mem=. */
+ if (memory_limit != 0)
+ limit = min(limit, memory_limit);
+
+ np = of_find_node_by_path("/memory@0");
+ if (!np)
+ goto out;
+
+ prop = of_get_property(np, "reg", NULL);
+ if (!prop)
+ goto put;
+
+ addr_cells = of_n_addr_cells(np);
+ base = of_read_number(prop, addr_cells);
+ prop += addr_cells;
+ size_cells = of_n_size_cells(np);
+ limit = min(limit, of_read_number(prop, size_cells));
+put:
+ of_node_put(np);
+out:
+ pr_debug("%s: base = %#llx limit = %#llx", __func__, base, limit);
+
+ return limit;
+}
+
+static void __init rtas_user_region_setup(void)
+{
+ phys_addr_t limit, align, size;
+
+ limit = rtas_arg_addr_limit();
+ size = RTAS_USER_REGION_SIZE;
+
+ /*
+ * Although work areas need only 4KB alignment, user space
+ * accesses this region via mmap so it must be placed on a
+ * page boundary.
+ */
+ align = PAGE_SIZE;
+
+ rtas_rmo_buf = memblock_phys_alloc_range(size, align, 0, limit);
+ if (rtas_rmo_buf == 0) {
+ panic("Failed to allocate %llu bytes for user region below %pa\n",
+ size, &limit);
+ }
+
+ pr_debug("RTAS user region allocated at %pa\n", &rtas_rmo_buf);
+}
+
/*
* Call early during boot, before mem init, to retrieve the RTAS
* information from the device-tree and allocate the RMO buffer for userland
@@ -1173,7 +1237,6 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs)
*/
void __init rtas_initialize(void)
{
- unsigned long rtas_region = RTAS_INSTANTIATE_MAX;
u32 base, size, entry;
int no_base, no_size, no_entry;
@@ -1197,23 +1260,10 @@ void __init rtas_initialize(void)
no_entry = of_property_read_u32(rtas.dev, "linux,rtas-entry", &entry);
rtas.entry = no_entry ? rtas.base : entry;
- /* If RTAS was found, allocate the RMO buffer for it and look for
- * the stop-self token if any
- */
-#ifdef CONFIG_PPC64
- if (firmware_has_feature(FW_FEATURE_LPAR))
- rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX);
-#endif
- rtas_rmo_buf = memblock_phys_alloc_range(RTAS_USER_REGION_SIZE, PAGE_SIZE,
- 0, rtas_region);
- if (!rtas_rmo_buf)
- panic("ERROR: RTAS: Failed to allocate %lx bytes below %pa\n",
- PAGE_SIZE, &rtas_region);
-
#ifdef CONFIG_RTAS_ERROR_LOGGING
rtas_last_error_token = rtas_token("rtas-last-error");
#endif
-
+ rtas_user_region_setup();
rtas_syscall_filter_init();
}
--
2.29.2
^ permalink raw reply related
* [PATCH 0/6] powerpc/rtas: miscellaneous cleanups, user region allocation
From: Nathan Lynch @ 2021-01-14 21:59 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
The region exposed to user space for use as work areas passed to
sys_rtas() can be incorrectly allocated on radix, leading to failures
in users of librtas. Correct this and clean up some of the code
visited along the way.
I think the cleanups should be unobjectionable and I've placed them
first in the series. Please check my work on the rtas_rmo_buf
allocation changes; they are only lightly tested so far (slot add on
Power9 PowerVM, and comparison of /memory@0/reg with the contents of
/proc/powerpc/rtas/rmo_buf on qemu Power9 w/radix).
I suspect the per-cpu RTAS argument structures for reentrant calls
need similar measures, but I can add that to the series once there is
consensus on the approach.
Nathan Lynch (6):
powerpc/rtas: improve ppc_rtas_rmo_buf_show documentation
powerpc/rtas-proc: remove unused RMO_READ_BUF_MAX
powerpc/rtas: remove ibm_suspend_me_token
powerpc/rtas: move syscall filter setup into separate function
powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE
powerpc/rtas: constrain user region allocation to RMA
arch/powerpc/include/asm/rtas.h | 9 ++-
arch/powerpc/kernel/rtas-proc.c | 15 +++--
arch/powerpc/kernel/rtas.c | 108 ++++++++++++++++++++++++--------
3 files changed, 98 insertions(+), 34 deletions(-)
--
2.29.2
^ permalink raw reply
* [PATCH 5/6] powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE
From: Nathan Lynch @ 2021-01-14 22:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: tyreld, ajd, aik, aneesh.kumar, brking
In-Reply-To: <20210114220004.1138993-1-nathanl@linux.ibm.com>
RTAS_RMOBUF_MAX doesn't actually describe a "maximum" value in any
sense. It represents the size of an area of memory set aside for user
space to use as work areas for certain RTAS calls.
Rename it to RTAS_USER_REGION, and express the value in terms of the
number of work areas allocated.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
squash! powerpc/rtas: rename RTAS_RMOBUF_MAX to RTAS_USER_REGION_SIZE
---
arch/powerpc/include/asm/rtas.h | 9 ++++++---
arch/powerpc/kernel/rtas-proc.c | 2 +-
arch/powerpc/kernel/rtas.c | 2 +-
3 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 332e1000ca0f..1aa7ab1cbc84 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -19,8 +19,11 @@
#define RTAS_UNKNOWN_SERVICE (-1)
#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */
-/* Buffer size for ppc_rtas system call. */
-#define RTAS_RMOBUF_MAX (64 * 1024)
+/* Work areas shared with RTAS must be 4K, naturally aligned. */
+#define RTAS_WORK_AREA_SIZE 4096
+
+/* Work areas allocated for user space access. */
+#define RTAS_USER_REGION_SIZE (RTAS_WORK_AREA_SIZE * 16)
/* RTAS return status codes */
#define RTAS_BUSY -2 /* RTAS Busy */
@@ -357,7 +360,7 @@ extern void rtas_take_timebase(void);
static inline int page_is_rtas_user_buf(unsigned long pfn)
{
unsigned long paddr = (pfn << PAGE_SHIFT);
- if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX))
+ if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_USER_REGION_SIZE))
return 1;
return 0;
}
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index d2b0d99824a4..6857a5b0a1c3 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -767,6 +767,6 @@ static int ppc_rtas_tone_volume_show(struct seq_file *m, void *v)
*/
static int ppc_rtas_rmo_buf_show(struct seq_file *m, void *v)
{
- seq_printf(m, "%016lx %x\n", rtas_rmo_buf, RTAS_RMOBUF_MAX);
+ seq_printf(m, "%016lx %x\n", rtas_rmo_buf, RTAS_USER_REGION_SIZE);
return 0;
}
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 55f6aa170e57..da65faadbbb2 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -1204,7 +1204,7 @@ void __init rtas_initialize(void)
if (firmware_has_feature(FW_FEATURE_LPAR))
rtas_region = min(ppc64_rma_size, RTAS_INSTANTIATE_MAX);
#endif
- rtas_rmo_buf = memblock_phys_alloc_range(RTAS_RMOBUF_MAX, PAGE_SIZE,
+ rtas_rmo_buf = memblock_phys_alloc_range(RTAS_USER_REGION_SIZE, PAGE_SIZE,
0, rtas_region);
if (!rtas_rmo_buf)
panic("ERROR: RTAS: Failed to allocate %lx bytes below %pa\n",
--
2.29.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox