* [PATCH 06/27] ARM: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts ARM to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/arm/kernel/entry-common.S | 8 ++++----
arch/arm/tools/Makefile | 9 ++++-----
arch/arm/tools/syscalltbl.sh | 22 ----------------------
3 files changed, 8 insertions(+), 31 deletions(-)
delete mode 100644 arch/arm/tools/syscalltbl.sh
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index e0d7833a1827..7f0b7aba1498 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -344,20 +344,19 @@ ENTRY(\sym)
.size \sym, . - \sym
.endm
-#define NATIVE(nr, func) syscall nr, func
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
+#define __SYSCALL(nr, func) syscall nr, func
/*
* This is the syscall table declaration for native ABI syscalls.
* With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
*/
syscall_table_start sys_call_table
-#define COMPAT(nr, native, compat) syscall nr, native
#ifdef CONFIG_AEABI
#include <calls-eabi.S>
#else
#include <calls-oabi.S>
#endif
-#undef COMPAT
syscall_table_end sys_call_table
/*============================================================================
@@ -455,7 +454,8 @@ ENDPROC(sys_oabi_readahead)
* using the compatibility syscall entries.
*/
syscall_table_start sys_oabi_call_table
-#define COMPAT(nr, native, compat) syscall nr, compat
+#undef __SYSCALL_WITH_COMPAT
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
#include <calls-oabi.S>
syscall_table_end sys_oabi_call_table
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 27d8beb7c941..c331cfe92b3c 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -10,7 +10,7 @@ kapi := $(gen)/asm
uapi := $(gen)/uapi/asm
syshdr := $(srctree)/$(src)/syscallhdr.sh
sysnr := $(srctree)/$(src)/syscallnr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
syscall := $(srctree)/$(src)/syscall.tbl
gen-y := $(gen)/calls-oabi.S
@@ -47,8 +47,7 @@ quiet_cmd_syshdr = SYSHDR $@
'__NR_SYSCALL_BASE'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abi_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ $(abis)
quiet_cmd_sysnr = SYSNR $@
cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@' \
@@ -70,10 +69,10 @@ sysnr_abi_unistd-nr := common,oabi,eabi,compat
$(kapi)/unistd-nr.h: $(syscall) $(sysnr) FORCE
$(call if_changed,sysnr)
-systbl_abi_calls-oabi := common,oabi
+$(gen)/calls-oabi.S: abis := common,oabi
$(gen)/calls-oabi.S: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abi_calls-eabi := common,eabi
+$(gen)/calls-eabi.S: abis := common,eabi
$(gen)/calls-eabi.S: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
diff --git a/arch/arm/tools/syscalltbl.sh b/arch/arm/tools/syscalltbl.sh
deleted file mode 100644
index ae7e93cfbfd3..000000000000
--- a/arch/arm/tools/syscalltbl.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- while read nr abi name entry compat; do
- if [ "$abi" = "eabi" -a -n "$compat" ]; then
- echo "$in: error: a compat entry for an EABI syscall ($name) makes no sense" >&2
- exit 1
- fi
-
- if [ -n "$entry" ]; then
- if [ -z "$compat" ]; then
- echo "NATIVE($nr, $entry)"
- else
- echo "COMPAT($nr, $entry, $compat)"
- fi
- fi
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 02/27] x86/syscalls: fix -Wmissing-prototypes warnings from COND_SYSCALL()
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
Building kernel/sys_ni.c with W=1 omits tons of -Wmissing-prototypes
warnings.
$ make W=1 kernel/sys_ni.o
[ snip ]
CC kernel/sys_ni.o
In file included from kernel/sys_ni.c:10:
./arch/x86/include/asm/syscall_wrapper.h:83:14: warning: no previous prototype for '__x64_sys_io_setup' [-Wmissing-prototypes]
83 | __weak long __##abi##_##name(const struct pt_regs *__unused) \
| ^~
./arch/x86/include/asm/syscall_wrapper.h:100:2: note: in expansion of macro '__COND_SYSCALL'
100 | __COND_SYSCALL(x64, sys_##name)
| ^~~~~~~~~~~~~~
./arch/x86/include/asm/syscall_wrapper.h:256:2: note: in expansion of macro '__X64_COND_SYSCALL'
256 | __X64_COND_SYSCALL(name) \
| ^~~~~~~~~~~~~~~~~~
kernel/sys_ni.c:39:1: note: in expansion of macro 'COND_SYSCALL'
39 | COND_SYSCALL(io_setup);
| ^~~~~~~~~~~~
./arch/x86/include/asm/syscall_wrapper.h:83:14: warning: no previous prototype for '__ia32_sys_io_setup' [-Wmissing-prototypes]
83 | __weak long __##abi##_##name(const struct pt_regs *__unused) \
| ^~
./arch/x86/include/asm/syscall_wrapper.h:120:2: note: in expansion of macro '__COND_SYSCALL'
120 | __COND_SYSCALL(ia32, sys_##name)
| ^~~~~~~~~~~~~~
./arch/x86/include/asm/syscall_wrapper.h:257:2: note: in expansion of macro '__IA32_COND_SYSCALL'
257 | __IA32_COND_SYSCALL(name)
| ^~~~~~~~~~~~~~~~~~~
kernel/sys_ni.c:39:1: note: in expansion of macro 'COND_SYSCALL'
39 | COND_SYSCALL(io_setup);
| ^~~~~~~~~~~~
...
__SYS_STUB0() and __SYS_STUBx() defined a few lines above have forward
declarations. Let's do likewise for __COND_SYSCALL() to fix the
warnings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/x86/include/asm/syscall_wrapper.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/include/asm/syscall_wrapper.h b/arch/x86/include/asm/syscall_wrapper.h
index a84333adeef2..80c08c7d5e72 100644
--- a/arch/x86/include/asm/syscall_wrapper.h
+++ b/arch/x86/include/asm/syscall_wrapper.h
@@ -80,6 +80,7 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs);
}
#define __COND_SYSCALL(abi, name) \
+ __weak long __##abi##_##name(const struct pt_regs *__unused); \
__weak long __##abi##_##name(const struct pt_regs *__unused) \
{ \
return sys_ni_syscall(); \
--
2.27.0
^ permalink raw reply related
* [PATCH 03/27] x86/build: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/x86/entry/syscalls/Makefile | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/arch/x86/entry/syscalls/Makefile b/arch/x86/entry/syscalls/Makefile
index 6fb9b57ed5ba..e1c7ddb7546b 100644
--- a/arch/x86/entry/syscalls/Makefile
+++ b/arch/x86/entry/syscalls/Makefile
@@ -24,34 +24,34 @@ quiet_cmd_hypercalls = HYPERCALLS $@
cmd_hypercalls = $(CONFIG_SHELL) '$<' $@ $(filter-out $<,$^)
syshdr_abi_unistd_32 := i386
-$(uapi)/unistd_32.h: $(syscall32) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall32) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abi_unistd_32_ia32 := i386
syshdr_pfx_unistd_32_ia32 := ia32_
-$(out)/unistd_32_ia32.h: $(syscall32) $(syshdr)
+$(out)/unistd_32_ia32.h: $(syscall32) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abi_unistd_x32 := common,x32
syshdr_offset_unistd_x32 := __X32_SYSCALL_BIT
-$(uapi)/unistd_x32.h: $(syscall64) $(syshdr)
+$(uapi)/unistd_x32.h: $(syscall64) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abi_unistd_64 := common,64
-$(uapi)/unistd_64.h: $(syscall64) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall64) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abi_unistd_64_x32 := x32
syshdr_pfx_unistd_64_x32 := x32_
-$(out)/unistd_64_x32.h: $(syscall64) $(syshdr)
+$(out)/unistd_64_x32.h: $(syscall64) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(out)/syscalls_32.h: $(syscall32) $(systbl)
+$(out)/syscalls_32.h: $(syscall32) $(systbl) FORCE
$(call if_changed,systbl)
-$(out)/syscalls_64.h: $(syscall64) $(systbl)
+$(out)/syscalls_64.h: $(syscall64) $(systbl) FORCE
$(call if_changed,systbl)
-$(out)/xen-hypercalls.h: $(srctree)/scripts/xen-hypercalls.sh
+$(out)/xen-hypercalls.h: $(srctree)/scripts/xen-hypercalls.sh FORCE
$(call if_changed,hypercalls)
$(out)/xen-hypercalls.h: $(srctree)/include/xen/interface/xen*.h
@@ -62,9 +62,10 @@ syshdr-$(CONFIG_X86_64) += unistd_32_ia32.h unistd_64_x32.h
syshdr-$(CONFIG_X86_64) += syscalls_64.h
syshdr-$(CONFIG_XEN) += xen-hypercalls.h
-targets += $(uapisyshdr-y) $(syshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+syshdr-y := $(addprefix $(out)/, $(syshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(syshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(out)/,$(syshdr-y))
+all: $(uapisyshdr-y) $(syshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 07/27] alpha: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/alpha/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
index 659faefdcb1d..1c42d2d2926d 100644
--- a/arch/alpha/kernel/syscalls/Makefile
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -21,18 +21,19 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_abi_$(basetarget))' \
'$(systbl_offset_$(basetarget))'
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 09/27] ia64: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/ia64/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/ia64/kernel/syscalls/Makefile b/arch/ia64/kernel/syscalls/Makefile
index 813a58cba39c..b9bfd186295f 100644
--- a/arch/ia64/kernel/syscalls/Makefile
+++ b/arch/ia64/kernel/syscalls/Makefile
@@ -22,19 +22,20 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_offset_$(basetarget))'
syshdr_offset_unistd_64 := __NR_Linux
-$(uapi)/unistd_64.h: $(syscall) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
systbl_offset_syscall_table := 1024
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_64.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 23/27] sparc: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts sparc to use scripts/syscalltbl.sh. This also
unifies syscall_table_64.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/sparc/include/asm/Kbuild | 1 -
arch/sparc/kernel/syscalls/Makefile | 19 ++++---------
arch/sparc/kernel/syscalls/syscalltbl.sh | 36 ------------------------
arch/sparc/kernel/systbls_32.S | 4 +--
arch/sparc/kernel/systbls_64.S | 8 ++++--
5 files changed, 12 insertions(+), 56 deletions(-)
delete mode 100644 arch/sparc/kernel/syscalls/syscalltbl.sh
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index aec20406145e..0b9d98ced34a 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
generated-y += syscall_table_32.h
generated-y += syscall_table_64.h
-generated-y += syscall_table_c32.h
generic-y += export.h
generic-y += kvm_para.h
generic-y += mcs_spinlock.h
diff --git a/arch/sparc/kernel/syscalls/Makefile b/arch/sparc/kernel/syscalls/Makefile
index 556fe30a6c8f..77fea5beb9be 100644
--- a/arch/sparc/kernel/syscalls/Makefile
+++ b/arch/sparc/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ $(abis)
syshdr_abis_unistd_32 := common,32
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
@@ -29,23 +26,17 @@ syshdr_abis_unistd_64 := common,64
$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-systbl_abis_syscall_table_32 := common,32
+$(kapi)/syscall_table_32.h: abis := common,32
$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_64 := common,64
+$(kapi)/syscall_table_64.h: abis := common,64
$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_c32 := common,32
-systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
uapisyshdr-y += unistd_32.h unistd_64.h
kapisyshdr-y += syscall_table_32.h \
- syscall_table_64.h \
- syscall_table_c32.h
+ syscall_table_64.h
uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
diff --git a/arch/sparc/kernel/syscalls/syscalltbl.sh b/arch/sparc/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 77cf0143ba19..000000000000
--- a/arch/sparc/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_nis_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry compat ; do
- if [ "$my_abi" = "c32" ] && [ ! -z "$compat" ]; then
- emit $((nxt+offset)) $((nr+offset)) $compat
- else
- emit $((nxt+offset)) $((nr+offset)) $entry
- fi
- nxt=$((nr+1))
- done
-) > "$out"
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index ab9e4d57685a..3aaffa017706 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -9,10 +9,10 @@
* Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
*/
-#define __SYSCALL(nr, entry, nargs) .long entry
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
+#define __SYSCALL(nr, entry) .long entry
.data
.align 4
.globl sys_call_table
sys_call_table:
#include <asm/syscall_table_32.h> /* 32-bit native syscalls */
-#undef __SYSCALL
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index a27394bf7d7f..398fe449dd34 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -10,18 +10,20 @@
* Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
*/
-#define __SYSCALL(nr, entry, nargs) .word entry
+#define __SYSCALL(nr, entry) .word entry
.text
.align 4
#ifdef CONFIG_COMPAT
.globl sys_call_table32
sys_call_table32:
-#include <asm/syscall_table_c32.h> /* Compat syscalls */
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
+#include <asm/syscall_table_32.h> /* Compat syscalls */
+#undef __SYSCALL_WITH_COMPAT
#endif /* CONFIG_COMPAT */
.align 4
.globl sys_call_table64, sys_call_table
sys_call_table64:
sys_call_table:
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
#include <asm/syscall_table_64.h> /* 64-bit native syscalls */
-#undef __SYSCALL
--
2.27.0
^ permalink raw reply related
* [PATCH 08/27] alpha: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts alpha to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/alpha/kernel/syscalls/Makefile | 7 ++----
arch/alpha/kernel/syscalls/syscalltbl.sh | 32 ------------------------
arch/alpha/kernel/systbls.S | 3 +--
3 files changed, 3 insertions(+), 39 deletions(-)
delete mode 100644 arch/alpha/kernel/syscalls/syscalltbl.sh
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
index 1c42d2d2926d..6610130c67bc 100644
--- a/arch/alpha/kernel/syscalls/Makefile
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
diff --git a/arch/alpha/kernel/syscalls/syscalltbl.sh b/arch/alpha/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/alpha/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 9704f22ed5e3..68f3e4f329eb 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -7,10 +7,9 @@
#include <asm/unistd.h>
-#define __SYSCALL(nr, entry, nargs) .quad entry
+#define __SYSCALL(nr, entry) .quad entry
.data
.align 3
.globl sys_call_table
sys_call_table:
#include <asm/syscall_table.h>
-#undef __SYSCALL
--
2.27.0
^ permalink raw reply related
* [PATCH 27/27] xtensa: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts xtensa to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/xtensa/kernel/syscall.c | 3 +--
arch/xtensa/kernel/syscalls/Makefile | 7 ++---
arch/xtensa/kernel/syscalls/syscalltbl.sh | 32 -----------------------
3 files changed, 3 insertions(+), 39 deletions(-)
delete mode 100644 arch/xtensa/kernel/syscalls/syscalltbl.sh
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index 2c415fce6801..a453d17f0da8 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -31,9 +31,8 @@
syscall_t sys_call_table[__NR_syscalls] /* FIXME __cacheline_aligned */= {
[0 ... __NR_syscalls - 1] = (syscall_t)&sys_ni_syscall,
-#define __SYSCALL(nr, entry, nargs)[nr] = (syscall_t)entry,
+#define __SYSCALL(nr, entry)[nr] = (syscall_t)entry,
#include <asm/syscall_table.h>
-#undef __SYSCALL
};
#define COLOUR_ALIGN(addr, pgoff) \
diff --git a/arch/xtensa/kernel/syscalls/Makefile b/arch/xtensa/kernel/syscalls/Makefile
index 1c42d2d2926d..6610130c67bc 100644
--- a/arch/xtensa/kernel/syscalls/Makefile
+++ b/arch/xtensa/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
diff --git a/arch/xtensa/kernel/syscalls/syscalltbl.sh b/arch/xtensa/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/xtensa/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 10/27] ia64: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts ia64 to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/ia64/kernel/entry.S | 3 +--
arch/ia64/kernel/syscalls/Makefile | 8 ++-----
arch/ia64/kernel/syscalls/syscalltbl.sh | 32 -------------------------
3 files changed, 3 insertions(+), 40 deletions(-)
delete mode 100644 arch/ia64/kernel/syscalls/syscalltbl.sh
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index e98e3dafffd8..5eba3fb2e311 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1420,10 +1420,9 @@ END(ftrace_stub)
#endif /* CONFIG_FUNCTION_TRACER */
-#define __SYSCALL(nr, entry, nargs) data8 entry
+#define __SYSCALL(nr, entry) data8 entry
.rodata
.align 8
.globl sys_call_table
sys_call_table:
#include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/ia64/kernel/syscalls/Makefile b/arch/ia64/kernel/syscalls/Makefile
index b9bfd186295f..3f7e0bfae7e3 100644
--- a/arch/ia64/kernel/syscalls/Makefile
+++ b/arch/ia64/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,16 +16,12 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ "" 1024
syshdr_offset_unistd_64 := __NR_Linux
$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-systbl_offset_syscall_table := 1024
$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
diff --git a/arch/ia64/kernel/syscalls/syscalltbl.sh b/arch/ia64/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/ia64/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 17/27] parisc: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/parisc/kernel/syscalls/Makefile | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/parisc/kernel/syscalls/Makefile b/arch/parisc/kernel/syscalls/Makefile
index c22a21c39f30..556fe30a6c8f 100644
--- a/arch/parisc/kernel/syscalls/Makefile
+++ b/arch/parisc/kernel/syscalls/Makefile
@@ -22,24 +22,24 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_offset_$(basetarget))'
syshdr_abis_unistd_32 := common,32
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abis_unistd_64 := common,64
-$(uapi)/unistd_64.h: $(syscall) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
systbl_abis_syscall_table_32 := common,32
-$(kapi)/syscall_table_32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_64 := common,64
-$(kapi)/syscall_table_64.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_c32 := common,32
systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
@@ -47,9 +47,10 @@ kapisyshdr-y += syscall_table_32.h \
syscall_table_64.h \
syscall_table_c32.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 12/27] m68k: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts m68k to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/m68k/kernel/syscalls/Makefile | 7 ++----
arch/m68k/kernel/syscalls/syscalltbl.sh | 32 -------------------------
arch/m68k/kernel/syscalltable.S | 3 +--
3 files changed, 3 insertions(+), 39 deletions(-)
delete mode 100644 arch/m68k/kernel/syscalls/syscalltbl.sh
diff --git a/arch/m68k/kernel/syscalls/Makefile b/arch/m68k/kernel/syscalls/Makefile
index 1c42d2d2926d..6610130c67bc 100644
--- a/arch/m68k/kernel/syscalls/Makefile
+++ b/arch/m68k/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
diff --git a/arch/m68k/kernel/syscalls/syscalltbl.sh b/arch/m68k/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/m68k/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index d329cc7b481c..e25ef4a9df30 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -18,9 +18,8 @@
#define sys_mmap2 sys_mmap_pgoff
#endif
-#define __SYSCALL(nr, entry, nargs) .long entry
+#define __SYSCALL(nr, entry) .long entry
.section .rodata
ALIGN
ENTRY(sys_call_table)
#include <asm/syscall_table.h>
-#undef __SYSCALL
--
2.27.0
^ permalink raw reply related
* [PATCH 18/27] parisc: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts parisc to use scripts/syscalltbl.sh. This also
unifies syscall_table_64.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/parisc/include/asm/Kbuild | 1 -
arch/parisc/kernel/syscall.S | 16 +++++-----
arch/parisc/kernel/syscalls/Makefile | 19 ++++--------
arch/parisc/kernel/syscalls/syscalltbl.sh | 36 -----------------------
4 files changed, 12 insertions(+), 60 deletions(-)
delete mode 100644 arch/parisc/kernel/syscalls/syscalltbl.sh
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 4406475a2304..e6e7f74c8ac9 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
generated-y += syscall_table_32.h
generated-y += syscall_table_64.h
-generated-y += syscall_table_c32.h
generic-y += kvm_para.h
generic-y += mcs_spinlock.h
generic-y += user.h
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 322503780db6..3f24a0af1e04 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -919,24 +919,24 @@ ENTRY(lws_table)
END(lws_table)
/* End of lws table */
+#ifdef CONFIG_64BIT
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
+#else
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
+#endif
#define __SYSCALL(nr, entry) ASM_ULONG_INSN entry
.align 8
ENTRY(sys_call_table)
.export sys_call_table,data
-#ifdef CONFIG_64BIT
-#include <asm/syscall_table_c32.h> /* Compat syscalls */
-#else
-#include <asm/syscall_table_32.h> /* 32-bit native syscalls */
-#endif
+#include <asm/syscall_table_32.h> /* 32-bit syscalls */
END(sys_call_table)
#ifdef CONFIG_64BIT
.align 8
ENTRY(sys_call_table64)
-#include <asm/syscall_table_64.h> /* 64-bit native syscalls */
+#include <asm/syscall_table_64.h> /* 64-bit syscalls */
END(sys_call_table64)
#endif
-#undef __SYSCALL
/*
All light-weight-syscall atomic operations
@@ -961,5 +961,3 @@ END(lws_lock_start)
.previous
.end
-
-
diff --git a/arch/parisc/kernel/syscalls/Makefile b/arch/parisc/kernel/syscalls/Makefile
index 556fe30a6c8f..77fea5beb9be 100644
--- a/arch/parisc/kernel/syscalls/Makefile
+++ b/arch/parisc/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ $(abis)
syshdr_abis_unistd_32 := common,32
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
@@ -29,23 +26,17 @@ syshdr_abis_unistd_64 := common,64
$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-systbl_abis_syscall_table_32 := common,32
+$(kapi)/syscall_table_32.h: abis := common,32
$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_64 := common,64
+$(kapi)/syscall_table_64.h: abis := common,64
$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_c32 := common,32
-systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
uapisyshdr-y += unistd_32.h unistd_64.h
kapisyshdr-y += syscall_table_32.h \
- syscall_table_64.h \
- syscall_table_c32.h
+ syscall_table_64.h
uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
diff --git a/arch/parisc/kernel/syscalls/syscalltbl.sh b/arch/parisc/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index f7393a7b18aa..000000000000
--- a/arch/parisc/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry compat ; do
- if [ "$my_abi" = "c32" ] && [ ! -z "$compat" ]; then
- emit $((nxt+offset)) $((nr+offset)) $compat
- else
- emit $((nxt+offset)) $((nr+offset)) $entry
- fi
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 11/27] m68k: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/m68k/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/m68k/kernel/syscalls/Makefile b/arch/m68k/kernel/syscalls/Makefile
index 659faefdcb1d..1c42d2d2926d 100644
--- a/arch/m68k/kernel/syscalls/Makefile
+++ b/arch/m68k/kernel/syscalls/Makefile
@@ -21,18 +21,19 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_abi_$(basetarget))' \
'$(systbl_offset_$(basetarget))'
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 14/27] microblaze: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts microblaze to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/microblaze/kernel/syscall_table.S | 3 +-
arch/microblaze/kernel/syscalls/Makefile | 7 ++--
arch/microblaze/kernel/syscalls/syscalltbl.sh | 32 -------------------
3 files changed, 3 insertions(+), 39 deletions(-)
delete mode 100644 arch/microblaze/kernel/syscalls/syscalltbl.sh
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index ce006646f741..3bc60a2b159e 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -1,6 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#define __SYSCALL(nr, entry, nargs) .long entry
+#define __SYSCALL(nr, entry) .long entry
ENTRY(sys_call_table)
#include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/microblaze/kernel/syscalls/Makefile b/arch/microblaze/kernel/syscalls/Makefile
index 1c42d2d2926d..6610130c67bc 100644
--- a/arch/microblaze/kernel/syscalls/Makefile
+++ b/arch/microblaze/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
diff --git a/arch/microblaze/kernel/syscalls/syscalltbl.sh b/arch/microblaze/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/microblaze/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 24/27] powerpc: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/powerpc/kernel/syscalls/Makefile | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/syscalls/Makefile b/arch/powerpc/kernel/syscalls/Makefile
index 27b48954808d..d609f0040b2a 100644
--- a/arch/powerpc/kernel/syscalls/Makefile
+++ b/arch/powerpc/kernel/syscalls/Makefile
@@ -22,31 +22,31 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_offset_$(basetarget))'
syshdr_abis_unistd_32 := common,nospu,32
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abis_unistd_64 := common,nospu,64
-$(uapi)/unistd_64.h: $(syscall) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
systbl_abis_syscall_table_32 := common,nospu,32
systbl_abi_syscall_table_32 := 32
-$(kapi)/syscall_table_32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_64 := common,nospu,64
systbl_abi_syscall_table_64 := 64
-$(kapi)/syscall_table_64.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_c32 := common,nospu,32
systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_spu := common,spu
systbl_abi_syscall_table_spu := spu
-$(kapi)/syscall_table_spu.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_spu.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
@@ -55,9 +55,10 @@ kapisyshdr-y += syscall_table_32.h \
syscall_table_c32.h \
syscall_table_spu.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 13/27] microblaze: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/microblaze/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/microblaze/kernel/syscalls/Makefile b/arch/microblaze/kernel/syscalls/Makefile
index 659faefdcb1d..1c42d2d2926d 100644
--- a/arch/microblaze/kernel/syscalls/Makefile
+++ b/arch/microblaze/kernel/syscalls/Makefile
@@ -21,18 +21,19 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_abi_$(basetarget))' \
'$(systbl_offset_$(basetarget))'
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 19/27] sh: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/sh/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/sh/kernel/syscalls/Makefile b/arch/sh/kernel/syscalls/Makefile
index 659faefdcb1d..1c42d2d2926d 100644
--- a/arch/sh/kernel/syscalls/Makefile
+++ b/arch/sh/kernel/syscalls/Makefile
@@ -21,18 +21,19 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_abi_$(basetarget))' \
'$(systbl_offset_$(basetarget))'
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 21/27] sparc: remove wrong comment from arch/sparc/include/asm/Kbuild
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
These are NOT exported to userspace.
The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/sparc/include/asm/Kbuild | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 3688fdae50e4..aec20406145e 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -1,6 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-# User exported sparc header files
-
generated-y += syscall_table_32.h
generated-y += syscall_table_64.h
generated-y += syscall_table_c32.h
--
2.27.0
^ permalink raw reply related
* [PATCH 26/27] xtensa: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/xtensa/kernel/syscalls/Makefile | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/xtensa/kernel/syscalls/Makefile b/arch/xtensa/kernel/syscalls/Makefile
index 659faefdcb1d..1c42d2d2926d 100644
--- a/arch/xtensa/kernel/syscalls/Makefile
+++ b/arch/xtensa/kernel/syscalls/Makefile
@@ -21,18 +21,19 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_abi_$(basetarget))' \
'$(systbl_offset_$(basetarget))'
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h
kapisyshdr-y += syscall_table.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 22/27] sparc: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/sparc/kernel/syscalls/Makefile | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/sparc/kernel/syscalls/Makefile b/arch/sparc/kernel/syscalls/Makefile
index c22a21c39f30..556fe30a6c8f 100644
--- a/arch/sparc/kernel/syscalls/Makefile
+++ b/arch/sparc/kernel/syscalls/Makefile
@@ -22,24 +22,24 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_offset_$(basetarget))'
syshdr_abis_unistd_32 := common,32
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_abis_unistd_64 := common,64
-$(uapi)/unistd_64.h: $(syscall) $(syshdr)
+$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
systbl_abis_syscall_table_32 := common,32
-$(kapi)/syscall_table_32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_64 := common,64
-$(kapi)/syscall_table_64.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abis_syscall_table_c32 := common,32
systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl)
+$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
@@ -47,9 +47,10 @@ kapisyshdr-y += syscall_table_32.h \
syscall_table_64.h \
syscall_table_c32.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 25/27] powerpc: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts powerpc to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/powerpc/include/asm/Kbuild | 1 -
arch/powerpc/kernel/syscalls/Makefile | 22 +++----------
arch/powerpc/kernel/syscalls/syscalltbl.sh | 36 ---------------------
arch/powerpc/kernel/systbl.S | 5 ++-
arch/powerpc/platforms/cell/spu_callbacks.c | 2 +-
5 files changed, 10 insertions(+), 56 deletions(-)
delete mode 100644 arch/powerpc/kernel/syscalls/syscalltbl.sh
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index e1f9b4ea1c53..bcf95ce0964f 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
generated-y += syscall_table_32.h
generated-y += syscall_table_64.h
-generated-y += syscall_table_c32.h
generated-y += syscall_table_spu.h
generic-y += export.h
generic-y += kvm_types.h
diff --git a/arch/powerpc/kernel/syscalls/Makefile b/arch/powerpc/kernel/syscalls/Makefile
index d609f0040b2a..ecf1474f8ea5 100644
--- a/arch/powerpc/kernel/syscalls/Makefile
+++ b/arch/powerpc/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ $(abis)
syshdr_abis_unistd_32 := common,nospu,32
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
@@ -29,30 +26,21 @@ syshdr_abis_unistd_64 := common,nospu,64
$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-systbl_abis_syscall_table_32 := common,nospu,32
-systbl_abi_syscall_table_32 := 32
+$(kapi)/syscall_table_32.h: abis := common,nospu,32
$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_64 := common,nospu,64
-systbl_abi_syscall_table_64 := 64
+$(kapi)/syscall_table_64.h: abis := common,nospu,64
$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abis_syscall_table_c32 := common,nospu,32
-systbl_abi_syscall_table_c32 := c32
-$(kapi)/syscall_table_c32.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-systbl_abis_syscall_table_spu := common,spu
-systbl_abi_syscall_table_spu := spu
+$(kapi)/syscall_table_spu.h: abis := common,spu
$(kapi)/syscall_table_spu.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
kapisyshdr-y += syscall_table_32.h \
syscall_table_64.h \
- syscall_table_c32.h \
syscall_table_spu.h
uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
diff --git a/arch/powerpc/kernel/syscalls/syscalltbl.sh b/arch/powerpc/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index f7393a7b18aa..000000000000
--- a/arch/powerpc/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry compat ; do
- if [ "$my_abi" = "c32" ] && [ ! -z "$compat" ]; then
- emit $((nxt+offset)) $((nr+offset)) $compat
- else
- emit $((nxt+offset)) $((nr+offset)) $entry
- fi
- nxt=$((nr+1))
- done
-) > "$out"
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index d34276f3c495..cb3358886203 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -21,6 +21,7 @@
#define __SYSCALL(nr, entry) .long entry
#endif
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
.globl sys_call_table
sys_call_table:
#ifdef CONFIG_PPC64
@@ -30,8 +31,10 @@ sys_call_table:
#endif
#ifdef CONFIG_COMPAT
+#undef __SYSCALL_WITH_COMPAT
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
.globl compat_sys_call_table
compat_sys_call_table:
#define compat_sys_sigsuspend sys_sigsuspend
-#include <asm/syscall_table_c32.h>
+#include <asm/syscall_table_32.h>
#endif
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index abdef9bcf432..fe0d8797a00a 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -35,9 +35,9 @@
*/
static void *spu_syscall_table[] = {
+#define __SYSCALL_WITH_COMPAT(nr, entry, compat) __SYSCALL(nr, entry)
#define __SYSCALL(nr, entry) [nr] = entry,
#include <asm/syscall_table_spu.h>
-#undef __SYSCALL
};
long spu_sys_callback(struct spu_syscall_block *s)
--
2.27.0
^ permalink raw reply related
* [PATCH 15/27] mips: add missing FORCE and fix 'targets' to make if_changed work
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
The rules in this Makefile cannot detect the command line change because
the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' addition is also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/mips/kernel/syscalls/Makefile | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile
index 6efb2f6889a7..f15842bda464 100644
--- a/arch/mips/kernel/syscalls/Makefile
+++ b/arch/mips/kernel/syscalls/Makefile
@@ -31,50 +31,50 @@ quiet_cmd_systbl = SYSTBL $@
'$(systbl_offset_$(basetarget))'
syshdr_offset_unistd_n32 := __NR_Linux
-$(uapi)/unistd_n32.h: $(syscalln32) $(syshdr)
+$(uapi)/unistd_n32.h: $(syscalln32) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_offset_unistd_n64 := __NR_Linux
-$(uapi)/unistd_n64.h: $(syscalln64) $(syshdr)
+$(uapi)/unistd_n64.h: $(syscalln64) $(syshdr) FORCE
$(call if_changed,syshdr)
syshdr_offset_unistd_o32 := __NR_Linux
-$(uapi)/unistd_o32.h: $(syscallo32) $(syshdr)
+$(uapi)/unistd_o32.h: $(syscallo32) $(syshdr) FORCE
$(call if_changed,syshdr)
sysnr_pfx_unistd_nr_n32 := N32
sysnr_offset_unistd_nr_n32 := 6000
-$(uapi)/unistd_nr_n32.h: $(syscalln32) $(sysnr)
+$(uapi)/unistd_nr_n32.h: $(syscalln32) $(sysnr) FORCE
$(call if_changed,sysnr)
sysnr_pfx_unistd_nr_n64 := 64
sysnr_offset_unistd_nr_n64 := 5000
-$(uapi)/unistd_nr_n64.h: $(syscalln64) $(sysnr)
+$(uapi)/unistd_nr_n64.h: $(syscalln64) $(sysnr) FORCE
$(call if_changed,sysnr)
sysnr_pfx_unistd_nr_o32 := O32
sysnr_offset_unistd_nr_o32 := 4000
-$(uapi)/unistd_nr_o32.h: $(syscallo32) $(sysnr)
+$(uapi)/unistd_nr_o32.h: $(syscallo32) $(sysnr) FORCE
$(call if_changed,sysnr)
systbl_abi_syscall_table_32_o32 := 32_o32
systbl_offset_syscall_table_32_o32 := 4000
-$(kapi)/syscall_table_32_o32.h: $(syscallo32) $(systbl)
+$(kapi)/syscall_table_32_o32.h: $(syscallo32) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abi_syscall_table_64_n32 := 64_n32
systbl_offset_syscall_table_64_n32 := 6000
-$(kapi)/syscall_table_64_n32.h: $(syscalln32) $(systbl)
+$(kapi)/syscall_table_64_n32.h: $(syscalln32) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abi_syscall_table_64_n64 := 64_n64
systbl_offset_syscall_table_64_n64 := 5000
-$(kapi)/syscall_table_64_n64.h: $(syscalln64) $(systbl)
+$(kapi)/syscall_table_64_n64.h: $(syscalln64) $(systbl) FORCE
$(call if_changed,systbl)
systbl_abi_syscall_table_64_o32 := 64_o32
systbl_offset_syscall_table_64_o32 := 4000
-$(kapi)/syscall_table_64_o32.h: $(syscallo32) $(systbl)
+$(kapi)/syscall_table_64_o32.h: $(syscallo32) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_n32.h \
@@ -88,9 +88,10 @@ kapisyshdr-y += syscall_table_32_o32.h \
syscall_table_64_n64.h \
syscall_table_64_o32.h
-targets += $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets += $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
@:
--
2.27.0
^ permalink raw reply related
* [PATCH 16/27] mips: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:50 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts mips to use scripts/syscalltbl.sh. This also
unifies syscall_table_32_o32.h and syscall_table_64_o32.h into
syscall_table_o32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/mips/include/asm/Kbuild | 7 +++--
arch/mips/kernel/scall32-o32.S | 4 +--
arch/mips/kernel/scall64-n32.S | 3 +--
arch/mips/kernel/scall64-n64.S | 3 +--
arch/mips/kernel/scall64-o32.S | 4 +--
arch/mips/kernel/syscalls/Makefile | 34 ++++++++---------------
arch/mips/kernel/syscalls/syscalltbl.sh | 36 -------------------------
7 files changed, 20 insertions(+), 71 deletions(-)
delete mode 100644 arch/mips/kernel/syscalls/syscalltbl.sh
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 95b4fa7bd0d1..70b15857369d 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -1,9 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
# MIPS headers
-generated-y += syscall_table_32_o32.h
-generated-y += syscall_table_64_n32.h
-generated-y += syscall_table_64_n64.h
-generated-y += syscall_table_64_o32.h
+generated-y += syscall_table_n32.h
+generated-y += syscall_table_n64.h
+generated-y += syscall_table_o32.h
generic-y += export.h
generic-y += kvm_para.h
generic-y += mcs_spinlock.h
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index b449b68662a9..84e8624e83a2 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -217,9 +217,9 @@ einval: li v0, -ENOSYS
#define sys_sched_getaffinity mipsmt_sys_sched_getaffinity
#endif /* CONFIG_MIPS_MT_FPAFF */
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, native)
#define __SYSCALL(nr, entry) PTR entry
.align 2
.type sys_call_table, @object
EXPORT(sys_call_table)
-#include <asm/syscall_table_32_o32.h>
-#undef __SYSCALL
+#include <asm/syscall_table_o32.h>
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 35d8c86b160e..f650c55a17dc 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -104,5 +104,4 @@ not_n32_scall:
#define __SYSCALL(nr, entry) PTR entry
.type sysn32_call_table, @object
EXPORT(sysn32_call_table)
-#include <asm/syscall_table_64_n32.h>
-#undef __SYSCALL
+#include <asm/syscall_table_n32.h>
diff --git a/arch/mips/kernel/scall64-n64.S b/arch/mips/kernel/scall64-n64.S
index 23b2e2b1609c..c71c13f9fcbc 100644
--- a/arch/mips/kernel/scall64-n64.S
+++ b/arch/mips/kernel/scall64-n64.S
@@ -113,5 +113,4 @@ illegal_syscall:
.align 3
.type sys_call_table, @object
EXPORT(sys_call_table)
-#include <asm/syscall_table_64_n64.h>
-#undef __SYSCALL
+#include <asm/syscall_table_n64.h>
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 50c9a57e0d3a..cedc8bd88804 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -213,9 +213,9 @@ einval: li v0, -ENOSYS
jr ra
END(sys32_syscall)
+#define __SYSCALL_WITH_COMPAT(nr, native, compat) __SYSCALL(nr, compat)
#define __SYSCALL(nr, entry) PTR entry
.align 3
.type sys32_call_table,@object
EXPORT(sys32_call_table)
-#include <asm/syscall_table_64_o32.h>
-#undef __SYSCALL
+#include <asm/syscall_table_o32.h>
diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile
index f15842bda464..265dab4253ab 100644
--- a/arch/mips/kernel/syscalls/Makefile
+++ b/arch/mips/kernel/syscalls/Makefile
@@ -10,7 +10,7 @@ syscalln64 := $(srctree)/$(src)/syscall_n64.tbl
syscallo32 := $(srctree)/$(src)/syscall_o32.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
sysnr := $(srctree)/$(src)/syscallnr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -25,10 +25,7 @@ quiet_cmd_sysnr = SYSNR $@
'$(sysnr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@ "" $(offset)
syshdr_offset_unistd_n32 := __NR_Linux
$(uapi)/unistd_n32.h: $(syscalln32) $(syshdr) FORCE
@@ -57,24 +54,16 @@ sysnr_offset_unistd_nr_o32 := 4000
$(uapi)/unistd_nr_o32.h: $(syscallo32) $(sysnr) FORCE
$(call if_changed,sysnr)
-systbl_abi_syscall_table_32_o32 := 32_o32
-systbl_offset_syscall_table_32_o32 := 4000
-$(kapi)/syscall_table_32_o32.h: $(syscallo32) $(systbl) FORCE
+$(kapi)/syscall_table_n32.h: offset := 6000
+$(kapi)/syscall_table_n32.h: $(syscalln32) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abi_syscall_table_64_n32 := 64_n32
-systbl_offset_syscall_table_64_n32 := 6000
-$(kapi)/syscall_table_64_n32.h: $(syscalln32) $(systbl) FORCE
+$(kapi)/syscall_table_n64.h: offset := 5000
+$(kapi)/syscall_table_n64.h: $(syscalln64) $(systbl) FORCE
$(call if_changed,systbl)
-systbl_abi_syscall_table_64_n64 := 64_n64
-systbl_offset_syscall_table_64_n64 := 5000
-$(kapi)/syscall_table_64_n64.h: $(syscalln64) $(systbl) FORCE
- $(call if_changed,systbl)
-
-systbl_abi_syscall_table_64_o32 := 64_o32
-systbl_offset_syscall_table_64_o32 := 4000
-$(kapi)/syscall_table_64_o32.h: $(syscallo32) $(systbl) FORCE
+$(kapi)/syscall_table_o32.h: offset := 4000
+$(kapi)/syscall_table_o32.h: $(syscallo32) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_n32.h \
@@ -83,10 +72,9 @@ uapisyshdr-y += unistd_n32.h \
unistd_nr_n32.h \
unistd_nr_n64.h \
unistd_nr_o32.h
-kapisyshdr-y += syscall_table_32_o32.h \
- syscall_table_64_n32.h \
- syscall_table_64_n64.h \
- syscall_table_64_o32.h
+kapisyshdr-y += syscall_table_n32.h \
+ syscall_table_n64.h \
+ syscall_table_o32.h
uapisyshdr-y := $(addprefix $(uapi)/, $(uapisyshdr-y))
kapisyshdr-y := $(addprefix $(kapi)/, $(kapisyshdr-y))
diff --git a/arch/mips/kernel/syscalls/syscalltbl.sh b/arch/mips/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 1e2570740c20..000000000000
--- a/arch/mips/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry compat ; do
- if [ "$my_abi" = "64_o32" ] && [ ! -z "$compat" ]; then
- emit $((nxt+offset)) $((nr+offset)) $compat
- else
- emit $((nxt+offset)) $((nr+offset)) $entry
- fi
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* [PATCH 20/27] sh: syscalls: switch to generic syscalltbl.sh
From: Masahiro Yamada @ 2021-01-28 0:51 UTC (permalink / raw)
To: linux-arch, x86
Cc: linux-xtensa, linux-ia64, linux-parisc, linux-kbuild,
Masahiro Yamada, linux-sh, linux-um, linux-kernel, linux-mips,
linux-m68k, linux-alpha, sparclinux, linuxppc-dev,
linux-arm-kernel
In-Reply-To: <20210128005110.2613902-1-masahiroy@kernel.org>
As of v5.11-rc1, 12 architectures duplicate similar shell scripts in
order to generate syscall table headers. My goal is to unify them into
the single scripts/syscalltbl.sh.
This commit converts sh to use scripts/syscalltbl.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
arch/sh/kernel/syscalls/Makefile | 7 ++----
arch/sh/kernel/syscalls/syscalltbl.sh | 32 ---------------------------
2 files changed, 2 insertions(+), 37 deletions(-)
delete mode 100644 arch/sh/kernel/syscalls/syscalltbl.sh
diff --git a/arch/sh/kernel/syscalls/Makefile b/arch/sh/kernel/syscalls/Makefile
index 1c42d2d2926d..6610130c67bc 100644
--- a/arch/sh/kernel/syscalls/Makefile
+++ b/arch/sh/kernel/syscalls/Makefile
@@ -7,7 +7,7 @@ _dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \
syscall := $(srctree)/$(src)/syscall.tbl
syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \
@@ -16,10 +16,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_offset_$(basetarget))'
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \
- '$(systbl_abis_$(basetarget))' \
- '$(systbl_abi_$(basetarget))' \
- '$(systbl_offset_$(basetarget))'
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
diff --git a/arch/sh/kernel/syscalls/syscalltbl.sh b/arch/sh/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 904b8e6e625d..000000000000
--- a/arch/sh/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
- t_nxt="$1"
- t_nr="$2"
- t_entry="$3"
-
- while [ $t_nxt -lt $t_nr ]; do
- printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}"
- t_nxt=$((t_nxt+1))
- done
- printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
- nxt=0
- if [ -z "$offset" ]; then
- offset=0
- fi
-
- while read nr abi name entry ; do
- emit $((nxt+offset)) $((nr+offset)) $entry
- nxt=$((nr+1))
- done
-) > "$out"
--
2.27.0
^ permalink raw reply related
* Re: [PATCH 02/27] x86/syscalls: fix -Wmissing-prototypes warnings from COND_SYSCALL()
From: Masahiro Yamada @ 2021-01-28 0:55 UTC (permalink / raw)
To: linux-arch, X86 ML
Cc: open list:TENSILICA XTENSA PORT (xtensa), linux-ia64,
linux-parisc, Linux Kbuild mailing list, Linux-sh list, linux-um,
Linux Kernel Mailing List, linux-mips, linux-m68k, linux-alpha,
sparclinux, linuxppc-dev, linux-arm-kernel
In-Reply-To: <20210128005110.2613902-3-masahiroy@kernel.org>
On Thu, Jan 28, 2021 at 9:52 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> Building kernel/sys_ni.c with W=1 omits tons of -Wmissing-prototypes
This is a typo. "omits" -> "emits"
> warnings.
>
> $ make W=1 kernel/sys_ni.o
> [ snip ]
> CC kernel/sys_ni.o
> In file included from kernel/sys_ni.c:10:
> ./arch/x86/include/asm/syscall_wrapper.h:83:14: warning: no previous prototype for '__x64_sys_io_setup' [-Wmissing-prototypes]
> 83 | __weak long __##abi##_##name(const struct pt_regs *__unused) \
> | ^~
> ./arch/x86/include/asm/syscall_wrapper.h:100:2: note: in expansion of macro '__COND_SYSCALL'
> 100 | __COND_SYSCALL(x64, sys_##name)
> | ^~~~~~~~~~~~~~
> ./arch/x86/include/asm/syscall_wrapper.h:256:2: note: in expansion of macro '__X64_COND_SYSCALL'
> 256 | __X64_COND_SYSCALL(name) \
> | ^~~~~~~~~~~~~~~~~~
> kernel/sys_ni.c:39:1: note: in expansion of macro 'COND_SYSCALL'
> 39 | COND_SYSCALL(io_setup);
> | ^~~~~~~~~~~~
> ./arch/x86/include/asm/syscall_wrapper.h:83:14: warning: no previous prototype for '__ia32_sys_io_setup' [-Wmissing-prototypes]
> 83 | __weak long __##abi##_##name(const struct pt_regs *__unused) \
> | ^~
> ./arch/x86/include/asm/syscall_wrapper.h:120:2: note: in expansion of macro '__COND_SYSCALL'
> 120 | __COND_SYSCALL(ia32, sys_##name)
> | ^~~~~~~~~~~~~~
> ./arch/x86/include/asm/syscall_wrapper.h:257:2: note: in expansion of macro '__IA32_COND_SYSCALL'
> 257 | __IA32_COND_SYSCALL(name)
> | ^~~~~~~~~~~~~~~~~~~
> kernel/sys_ni.c:39:1: note: in expansion of macro 'COND_SYSCALL'
> 39 | COND_SYSCALL(io_setup);
> | ^~~~~~~~~~~~
> ...
>
> __SYS_STUB0() and __SYS_STUBx() defined a few lines above have forward
> declarations. Let's do likewise for __COND_SYSCALL() to fix the
> warnings.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> arch/x86/include/asm/syscall_wrapper.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/x86/include/asm/syscall_wrapper.h b/arch/x86/include/asm/syscall_wrapper.h
> index a84333adeef2..80c08c7d5e72 100644
> --- a/arch/x86/include/asm/syscall_wrapper.h
> +++ b/arch/x86/include/asm/syscall_wrapper.h
> @@ -80,6 +80,7 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs);
> }
>
> #define __COND_SYSCALL(abi, name) \
> + __weak long __##abi##_##name(const struct pt_regs *__unused); \
> __weak long __##abi##_##name(const struct pt_regs *__unused) \
> { \
> return sys_ni_syscall(); \
> --
> 2.27.0
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox