* Re: [PATCH] mm/memtest: Add ARCH_USE_MEMTEST
From: Anshuman Khandual @ 2021-02-08 3:04 UTC (permalink / raw)
To: Max Filippov
Cc: Chris Zankel, Thomas Bogendoerfer,
open list:TENSILICA XTENSA PORT (xtensa), linuxppc-dev, LKML,
Russell King, linux-mips, Linux Memory Management List,
Ingo Molnar, Paul Mackerras, Catalin Marinas, Thomas Gleixner,
Will Deacon, linux-arm-kernel
In-Reply-To: <CAMo8BfLXaycXgy-F=TaWzpEZZJKEhbZecxwvBVd6jTo0RJ8atQ@mail.gmail.com>
On 2/5/21 1:05 PM, Max Filippov wrote:
> On Thu, Feb 4, 2021 at 8:10 PM Anshuman Khandual
> <anshuman.khandual@arm.com> wrote:
>>
>> early_memtest() does not get called from all architectures. Hence enabling
>> CONFIG_MEMTEST and providing a valid memtest=[1..N] kernel command line
>> option might not trigger the memory pattern tests as would be expected in
>> normal circumstances. This situation is misleading.
>>
>> The change here prevents the above mentioned problem after introducing a
>> new config option ARCH_USE_MEMTEST that should be subscribed on platforms
>> that call early_memtest(), in order to enable the config CONFIG_MEMTEST.
>> Conversely CONFIG_MEMTEST cannot be enabled on platforms where it would
>> not be tested anyway.
>>
>> Cc: Russell King <linux@armlinux.org.uk>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will@kernel.org>
>> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
>> Cc: Michael Ellerman <mpe@ellerman.id.au>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Paul Mackerras <paulus@samba.org>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Ingo Molnar <mingo@redhat.com>
>> Cc: Chris Zankel <chris@zankel.net>
>> Cc: Max Filippov <jcmvbkbc@gmail.com>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-mips@vger.kernel.org
>> Cc: linuxppc-dev@lists.ozlabs.org
>> Cc: linux-xtensa@linux-xtensa.org
>> Cc: linux-mm@kvack.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
>> ---
>> This patch applies on v5.11-rc6 and has been tested on arm64 platform. But
>> it has been just build tested on all other platforms.
>>
>> arch/arm/Kconfig | 1 +
>> arch/arm64/Kconfig | 1 +
>> arch/mips/Kconfig | 1 +
>> arch/powerpc/Kconfig | 1 +
>> arch/x86/Kconfig | 1 +
>> arch/xtensa/Kconfig | 1 +
>> lib/Kconfig.debug | 9 ++++++++-
>> 7 files changed, 14 insertions(+), 1 deletion(-)
>
> Anshuman, entries in arch/*/Konfig files are sorted in alphabetical order,
> please keep them that way.
Sure, will fix up and resend.
>
> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
>
^ permalink raw reply
* Re: [PATCH] mm/memtest: Add ARCH_USE_MEMTEST
From: Anshuman Khandual @ 2021-02-08 3:17 UTC (permalink / raw)
To: Vladimir Murzin, linux-mm
Cc: Chris Zankel, Thomas Bogendoerfer, Catalin Marinas, Will Deacon,
linux-xtensa, linux-kernel, Russell King, Max Filippov,
Ingo Molnar, Paul Mackerras, Thomas Gleixner, linux-mips,
linuxppc-dev, linux-arm-kernel
In-Reply-To: <a58f1a92-087d-cf90-ce2b-0c88b39a8116@arm.com>
On 2/5/21 2:50 PM, Vladimir Murzin wrote:
> Hi Anshuman,
>
> On 2/5/21 4:10 AM, Anshuman Khandual wrote:
>> early_memtest() does not get called from all architectures. Hence enabling
>> CONFIG_MEMTEST and providing a valid memtest=[1..N] kernel command line
>> option might not trigger the memory pattern tests as would be expected in
>> normal circumstances. This situation is misleading.
>
> Documentation already mentions which architectures support that:
>
> memtest= [KNL,X86,ARM,PPC] Enable memtest
>
> yet I admit that not all reflected there
But there is nothing that prevents CONFIG_MEMTEST from being set on
other platforms that do not have an affect, which is not optimal.
>
>>
>> The change here prevents the above mentioned problem after introducing a
>> new config option ARCH_USE_MEMTEST that should be subscribed on platforms
>> that call early_memtest(), in order to enable the config CONFIG_MEMTEST.
>> Conversely CONFIG_MEMTEST cannot be enabled on platforms where it would
>> not be tested anyway.
>>
>
> Is that generic pattern? What about other cross arch parameters? Do they already
> use similar subscription or they rely on documentation?
Depending solely on the documentation should not be sufficient.
>
> I'm not against the patch just want to check if things are consistent...
Not sure about other similar situations but those if present should
get fixed as well.
^ permalink raw reply
* [PATCH v3 1/2] powerpc/64s: Fix pte update for kernel memory on radix
From: Jordan Niethe @ 2021-02-08 3:29 UTC (permalink / raw)
To: linuxppc-dev; +Cc: npiggin, cmr, naveen.n.rao, Jordan Niethe
When adding a pte a ptesync is needed to order the update of the pte
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults are
not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the vmalloc
region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix. In
do_patch_instruction() the page frame that contains the instruction to
be patched is mapped and then immediately patched. With no ordering or
synchronization between setting up the pte and writing to the page it is
possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
[ 418.498768][ T757] BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
[ 418.498790][ T757] Faulting instruction address: 0xc00000000008bd74
[ 418.498805][ T757] Oops: Kernel access of bad area, sig: 11 [#1]
[ 418.498828][ T757] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ 418.498843][ T757] Modules linked in: nop_module(PO+) [last unloaded: nop_module]
[ 418.498872][ T757] CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
[ 418.498936][ T757] NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810
[ 418.498979][ T757] REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
[ 418.499033][ T757] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000
[ 418.499084][ T757] CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done)&
Turning ftrace on and off does a large amount of code patching which in
usually less then 5min will crash giving a trace like:
[ 146.668988][ T809] ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000)
[ 146.668995][ T809] ------------[ ftrace bug ]------------
[ 146.669031][ T809] ftrace failed to modify
[ 146.669039][ T809] [<c000000000bf8e5c>] napi_busy_loop+0xc/0x390
[ 146.669045][ T809] actual: 11:3b:47:4b
[ 146.669070][ T809] Setting ftrace call site to call ftrace function
[ 146.669075][ T809] ftrace record flags: 80000001
[ 146.669081][ T809] (1)
[ 146.669081][ T809] expected tramp: c00000000006c96c
[ 146.669096][ T809] ------------[ cut here ]------------
[ 146.669104][ T809] WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
[ 146.669109][ T809] Modules linked in: nop_module(PO-) [last unloaded: nop_module]
[ 146.669130][ T809] CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
[ 146.669136][ T809] NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0
[ 146.669142][ T809] REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
[ 146.669147][ T809] MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000
[ 146.669208][ T809] CFAR: c0000000001a9c98 IRQMASK: 0
[ 146.669208][ T809] GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
[ 146.669208][ T809] GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
[ 146.669208][ T809] GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
[ 146.669208][ T809] GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
[ 146.669208][ T809] GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
[ 146.669208][ T809] GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
[ 146.669208][ T809] GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020
[ 146.669208][ T809] GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
[ 146.669384][ T809] NIP [c00000000024f334] ftrace_bug+0x28c/0x2e8
[ 146.669391][ T809] LR [c00000000024f330] ftrace_bug+0x288/0x2e8
[ 146.669396][ T809] Call Trace:
[ 146.669403][ T809] [c000000004c8b9f0] [c00000000024f330] ftrace_bug+0x288/0x2e8 (unreliable)
[ 146.669418][ T809] [c000000004c8ba80] [c000000000248778] ftrace_modify_all_code+0x168/0x210
[ 146.669429][ T809] [c000000004c8bab0] [c00000000006c528] arch_ftrace_update_code+0x18/0x30
[ 146.669440][ T809] [c000000004c8bad0] [c000000000248954] ftrace_run_update_code+0x44/0xc0
[ 146.669451][ T809] [c000000004c8bb00] [c00000000024dc88] ftrace_startup+0xf8/0x1c0
[ 146.669461][ T809] [c000000004c8bb40] [c00000000024dd9c] register_ftrace_function+0x4c/0xc0
[ 146.669472][ T809] [c000000004c8bb70] [c00000000026e750] function_trace_init+0x80/0xb0
[ 146.669484][ T809] [c000000004c8bba0] [c000000000266b84] tracing_set_tracer+0x2a4/0x4f0
[ 146.669495][ T809] [c000000004c8bc70] [c000000000266ea4] tracing_set_trace_write+0xd4/0x130
[ 146.669506][ T809] [c000000004c8bd20] [c000000000422790] vfs_write+0xf0/0x330
[ 146.669518][ T809] [c000000004c8bd70] [c000000000422bb4] ksys_write+0x84/0x140
[ 146.669529][ T809] [c000000004c8bdc0] [c00000000003499c] system_call_exception+0x14c/0x230
[ 146.669540][ T809] [c000000004c8be20] [c00000000000d860] system_call_common+0xf0/0x27c
[ 146.669549][ T809] Instruction dump:
[ 146.669558][ T809] 48000014 3c62fe88 38631718 4bf5a941 60000000 7fc3f378 4bff877d 7c641b78
[ 146.669598][ T809] 3c62fe88 38631730 4bf5a925 60000000 <0fe00000> 38210090 3d22fd90 39000001
[ 146.669638][ T809] ---[ end trace 5ea7076ea28c0fbd ]---
To fix this when updating kernel memory ptes using ptesync.
Fixes: f1cb8f9beba8 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
---
v2: Only ptesync is needed
v3: Fix Fixes tag
---
arch/powerpc/include/asm/book3s/64/radix.h | 6 ++++--
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 ++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index c7813dc628fc..59cab558e2f0 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -222,8 +222,10 @@ static inline void radix__set_pte_at(struct mm_struct *mm, unsigned long addr,
* from ptesync, it should probably go into update_mmu_cache, rather
* than set_pte_at (which is used to set ptes unrelated to faults).
*
- * Spurious faults to vmalloc region are not tolerated, so there is
- * a ptesync in flush_cache_vmap.
+ * Spurious faults from the kernel memory are not tolerated, so there
+ * is a ptesync in flush_cache_vmap, and __map_kernel_page() follows
+ * the pte update sequence from ISA Book III 6.10 Translation Table
+ * Update Synchronization Requirements.
*/
}
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 3adcf730f478..1d5eec847b88 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -108,7 +108,7 @@ static int early_map_kernel_page(unsigned long ea, unsigned long pa,
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
- smp_wmb();
+ asm volatile("ptesync": : :"memory");
return 0;
}
@@ -168,7 +168,7 @@ static int __map_kernel_page(unsigned long ea, unsigned long pa,
set_the_pte:
set_pte_at(&init_mm, ea, ptep, pfn_pte(pfn, flags));
- smp_wmb();
+ asm volatile("ptesync": : :"memory");
return 0;
}
--
2.25.1
^ permalink raw reply related
* [PATCH v3 2/2] selftests/powerpc: Test for spurious kernel memory faults on radix
From: Jordan Niethe @ 2021-02-08 3:29 UTC (permalink / raw)
To: linuxppc-dev; +Cc: npiggin, cmr, naveen.n.rao, Jordan Niethe
In-Reply-To: <20210208032957.1232102-1-jniethe5@gmail.com>
Previously when mapping kernel memory on radix, no ptesync was included
which would periodically lead to unhandled spurious faults. Mapping
kernel memory is used when code patching with Strict RWX enabled. As
suggested by Chris Riedl, turning ftrace on and off does a large amount
of code patching so is a convenient way to see this kind of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to show
up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
---
v3: New to series
---
tools/testing/selftests/powerpc/mm/Makefile | 1 +
.../selftests/powerpc/mm/spurious_fault.sh | 49 +++++++++++++++++++
2 files changed, 50 insertions(+)
create mode 100755 tools/testing/selftests/powerpc/mm/spurious_fault.sh
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index defe488d6bf1..56c2896bed53 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -5,6 +5,7 @@ noarg:
TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
large_vm_fork_separation bad_accesses pkey_exec_prot \
pkey_siginfo stack_expansion_signal stack_expansion_ldst
+TEST_PROGS := spurious_fault.sh
TEST_GEN_PROGS_EXTENDED := tlbie_test
TEST_GEN_FILES := tempfile
diff --git a/tools/testing/selftests/powerpc/mm/spurious_fault.sh b/tools/testing/selftests/powerpc/mm/spurious_fault.sh
new file mode 100755
index 000000000000..e454509659f6
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/spurious_fault.sh
@@ -0,0 +1,49 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+TIMEOUT=30
+
+DEBUFS_DIR=`cat /proc/mounts | grep debugfs | awk '{print $2}'`
+if [ ! -e "$DEBUFS_DIR" ]
+then
+ echo "debugfs not found, skipping" 1>&2
+ exit 4
+fi
+
+if [ ! -e "$DEBUFS_DIR/tracing/current_tracer" ]
+then
+ echo "Tracing files not found, skipping" 1>&2
+ exit 4
+fi
+
+
+echo "Testing for spurious faults when mapping kernel memory..."
+
+if grep -q "FUNCTION TRACING IS CORRUPTED" "$DEBUFS_DIR/tracing/trace"
+then
+ echo "FAILED: Ftrace already dead. Probably due to a spurious fault" 1>&2
+ exit 1
+fi
+
+dmesg -C
+START_TIME=`date +%s`
+END_TIME=`expr $START_TIME + $TIMEOUT`
+while [ `date +%s` -lt $END_TIME ]
+do
+ echo function > $DEBUFS_DIR/tracing/current_tracer
+ echo nop > $DEBUFS_DIR/tracing/current_tracer
+ if dmesg | grep -q 'ftrace bug'
+ then
+ break
+ fi
+done
+
+echo nop > $DEBUFS_DIR/tracing/current_tracer
+if dmesg | grep -q 'ftrace bug'
+then
+ echo "FAILED: Mapping kernel memory causes spurious faults" 1>&2
+ exit 1
+else
+ echo "OK: Mapping kernel memory does not cause spurious faults"
+ exit 0
+fi
--
2.25.1
^ permalink raw reply related
* [PATCH] ASoC: imx-hdmi: no need to set .owner when using module_platform_driver
From: Tian Tao @ 2021-02-08 3:51 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, perex, tiwai, shawnguo, s.hauer
Cc: alsa-devel, linuxppc-dev, linux-arm-kernel
the module_platform_driver will call platform_driver_register.
and It will set the .owner to THIS_MODULE
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
---
sound/soc/fsl/imx-hdmi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/fsl/imx-hdmi.c b/sound/soc/fsl/imx-hdmi.c
index dbbb7618..cd0235a 100644
--- a/sound/soc/fsl/imx-hdmi.c
+++ b/sound/soc/fsl/imx-hdmi.c
@@ -223,7 +223,6 @@ MODULE_DEVICE_TABLE(of, imx_hdmi_dt_ids);
static struct platform_driver imx_hdmi_driver = {
.driver = {
.name = "imx-hdmi",
- .owner = THIS_MODULE,
.pm = &snd_soc_pm_ops,
.of_match_table = imx_hdmi_dt_ids,
},
--
2.7.4
^ permalink raw reply related
* Re: [PATCH v16 11/12] powerpc: Use OF alloc and free for FDT
From: Michael Ellerman @ 2021-02-08 4:12 UTC (permalink / raw)
To: Rob Herring, Lakshmi Ramasubramanian
Cc: Mark Rutland, Bhupesh Sharma, tao.li, Mimi Zohar, Paul Mackerras,
vincenzo.frascino, Frank Rowand, Sasha Levin, Will Deacon,
Masahiro Yamada, James Morris, AKASHI, Takahiro, linux-arm-kernel,
Catalin Marinas, Serge E. Hallyn, devicetree, Pavel Tatashin,
Prakhar Srivastava, Hsin-Yi Wang, Allison Randal,
Christophe Leroy, Matthias Brugger, balajib, dmitry.kasatkin,
linux-kernel@vger.kernel.org, James Morse, Greg Kroah-Hartman,
Joe Perches, linux-integrity, linuxppc-dev, Thiago Jung Bauermann
In-Reply-To: <CAL_JsqK1Pb9nAeL84EP2U3MQgpBsm+E_0QXmzbigWXnS245WPQ@mail.gmail.com>
Rob Herring <robh@kernel.org> writes:
> On Thu, Feb 4, 2021 at 10:42 AM Lakshmi Ramasubramanian
> <nramas@linux.microsoft.com> wrote:
...
>> diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
>> index d0e459bb2f05..51d2d8eb6c1b 100644
>> --- a/arch/powerpc/kexec/elf_64.c
>> +++ b/arch/powerpc/kexec/elf_64.c
>> @@ -19,6 +19,7 @@
>> #include <linux/kexec.h>
>> #include <linux/libfdt.h>
>> #include <linux/module.h>
>> +#include <linux/of.h>
>> #include <linux/of_fdt.h>
>> #include <linux/slab.h>
>> #include <linux/types.h>
>> @@ -32,7 +33,7 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
>> unsigned int fdt_size;
>> unsigned long kernel_load_addr;
>> unsigned long initrd_load_addr = 0, fdt_load_addr;
>> - void *fdt;
>> + void *fdt = NULL;
>> const void *slave_code;
>> struct elfhdr ehdr;
>> char *modified_cmdline = NULL;
>> @@ -103,18 +104,12 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
>> }
>>
>> fdt_size = fdt_totalsize(initial_boot_params) * 2;
>> - fdt = kmalloc(fdt_size, GFP_KERNEL);
>> + fdt = of_alloc_and_init_fdt(fdt_size);
>> if (!fdt) {
>> pr_err("Not enough memory for the device tree.\n");
>> ret = -ENOMEM;
>> goto out;
>> }
>> - ret = fdt_open_into(initial_boot_params, fdt, fdt_size);
>> - if (ret < 0) {
>> - pr_err("Error setting up the new device tree.\n");
>> - ret = -EINVAL;
>> - goto out;
>> - }
>>
>> ret = setup_new_fdt_ppc64(image, fdt, initrd_load_addr,
>
> The first thing this function does is call setup_new_fdt() which first
> calls of_kexec_setup_new_fdt(). (Note, I really don't understand the
> PPC code split. It looks like there's a 32-bit and 64-bit split, but
> 32-bit looks broken to me. Nothing ever calls setup_new_fdt() except
> setup_new_fdt_ppc64()).
I think that's because 32-bit doesn't support kexec_file_load().
cheers
^ permalink raw reply
* Re: [PATCH v5 03/10] powerpc/signal64: Move non-inline functions out of setup_sigcontext()
From: Daniel Axtens @ 2021-02-08 4:44 UTC (permalink / raw)
To: Christopher M. Riedl, linuxppc-dev
In-Reply-To: <20210203184323.20792-4-cmr@codefail.de>
Hi Chris,
These two paragraphs are a little confusing and they seem slightly
repetitive. But I get the general idea. Two specific comments below:
> There are non-inline functions which get called in setup_sigcontext() to
> save register state to the thread struct. Move these functions into a
> separate prepare_setup_sigcontext() function so that
> setup_sigcontext() can be refactored later into an "unsafe" version
> which assumes an open uaccess window. Non-inline functions should be
> avoided when uaccess is open.
Why do we want to avoid non-inline functions? We came up with:
- we want KUAP protection for as much of the kernel as possible: each
extra bit of code run with the window open is another piece of attack
surface.
- non-inline functions default to traceable, which means we could end
up ftracing while uaccess is enabled. That's a pretty big hole in the
defences that KUAP provides.
I think we've also had problems with the window being opened or closed
unexpectedly by various bits of code? So the less code runs in uaccess
context the less likely that is to occur.
> The majority of setup_sigcontext() can be refactored to execute in an
> "unsafe" context (uaccess window is opened) except for some non-inline
> functions. Move these out into a separate prepare_setup_sigcontext()
> function which must be called first and before opening up a uaccess
> window. A follow-up commit converts setup_sigcontext() to be "unsafe".
This was a bit confusing until we realise that you're moving the _calls_
to the non-inline functions out, not the non-inline functions themselves.
> Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
> ---
> arch/powerpc/kernel/signal_64.c | 32 +++++++++++++++++++++-----------
> 1 file changed, 21 insertions(+), 11 deletions(-)
>
> diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
> index f9e4a1ac440f..b211a8ea4f6e 100644
> --- a/arch/powerpc/kernel/signal_64.c
> +++ b/arch/powerpc/kernel/signal_64.c
> @@ -79,6 +79,24 @@ static elf_vrreg_t __user *sigcontext_vmx_regs(struct sigcontext __user *sc)
> }
> #endif
>
> +static void prepare_setup_sigcontext(struct task_struct *tsk, int ctx_has_vsx_region)
ctx_has_vsx_region should probably be a bool? Although setup_sigcontext
also has it as an int so I guess that's arguable, and maybe it's better
to stick with this for constency.
> +{
> +#ifdef CONFIG_ALTIVEC
> + /* save altivec registers */
> + if (tsk->thread.used_vr)
> + flush_altivec_to_thread(tsk);
> + if (cpu_has_feature(CPU_FTR_ALTIVEC))
> + tsk->thread.vrsave = mfspr(SPRN_VRSAVE);
> +#endif /* CONFIG_ALTIVEC */
> +
> + flush_fp_to_thread(tsk);
> +
> +#ifdef CONFIG_VSX
> + if (tsk->thread.used_vsr && ctx_has_vsx_region)
> + flush_vsx_to_thread(tsk);
> +#endif /* CONFIG_VSX */
Alternatively, given that this is the only use of ctx_has_vsx_region,
mpe suggested that perhaps we could drop it entirely and always
flush_vsx if used_vsr. The function is only ever called with either
`current` or wth ctx_has_vsx_region set to 1, so in either case I think
that's safe? I'm not sure if it would have performance implications.
Should we move this and the altivec ifdef to IS_ENABLED(CONFIG_VSX) etc?
I'm not sure if that runs into any problems with things like 'used_vsr'
only being defined if CONFIG_VSX is set, but I thought I'd ask.
> +}
> +
> /*
> * Set up the sigcontext for the signal frame.
> */
> @@ -97,7 +115,6 @@ static long setup_sigcontext(struct sigcontext __user *sc,
> */
> #ifdef CONFIG_ALTIVEC
> elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc);
> - unsigned long vrsave;
> #endif
> struct pt_regs *regs = tsk->thread.regs;
> unsigned long msr = regs->msr;
> @@ -112,7 +129,6 @@ static long setup_sigcontext(struct sigcontext __user *sc,
>
> /* save altivec registers */
> if (tsk->thread.used_vr) {
> - flush_altivec_to_thread(tsk);
> /* Copy 33 vec registers (vr0..31 and vscr) to the stack */
> err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
> 33 * sizeof(vector128));
> @@ -124,17 +140,10 @@ static long setup_sigcontext(struct sigcontext __user *sc,
> /* We always copy to/from vrsave, it's 0 if we don't have or don't
> * use altivec.
> */
> - vrsave = 0;
> - if (cpu_has_feature(CPU_FTR_ALTIVEC)) {
> - vrsave = mfspr(SPRN_VRSAVE);
> - tsk->thread.vrsave = vrsave;
> - }
> -
> - err |= __put_user(vrsave, (u32 __user *)&v_regs[33]);
> + err |= __put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
Previously, if !cpu_has_feature(ALTIVEC), v_regs[33] had vrsave stored,
which was set to 0 explicitly. Now we store thread.vrsave instead of the
local vrsave. That should be safe - it is initalised to 0 elsewhere.
So you don't have to do anything here, this is just letting you know
that we checked it and thought about it.
> #else /* CONFIG_ALTIVEC */
> err |= __put_user(0, &sc->v_regs);
> #endif /* CONFIG_ALTIVEC */
> - flush_fp_to_thread(tsk);
> /* copy fpr regs and fpscr */
> err |= copy_fpr_to_user(&sc->fp_regs, tsk);
>
> @@ -150,7 +159,6 @@ static long setup_sigcontext(struct sigcontext __user *sc,
> * VMX data.
> */
> if (tsk->thread.used_vsr && ctx_has_vsx_region) {
> - flush_vsx_to_thread(tsk);
> v_regs += ELF_NVRREG;
> err |= copy_vsx_to_user(v_regs, tsk);
> /* set MSR_VSX in the MSR value in the frame to
> @@ -655,6 +663,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
> ctx_has_vsx_region = 1;
>
> if (old_ctx != NULL) {
> + prepare_setup_sigcontext(current, ctx_has_vsx_region);
> if (!access_ok(old_ctx, ctx_size)
> || setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL, 0,
> ctx_has_vsx_region)
I had a think about whether there was a problem with bubbling
prepare_setup_sigcontext over the access_ok() test, but given that
prepare_setup_sigcontext(current ...) doesn't access any of old_ctx, I'm
satisfied that it's OK - no changes needed.
> @@ -842,6 +851,7 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
> #endif
> {
> err |= __put_user(0, &frame->uc.uc_link);
> + prepare_setup_sigcontext(tsk, 1);
Why do we call with ctx_has_vsx_region = 1 here? It's not immediately
clear to me why this is correct, but mpe and Mikey seem pretty convinced
that it is.
> err |= setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
> NULL, (unsigned long)ksig->ka.sa.sa_handler,
> 1);
Finally, it's a bit hard to figure out where to put this, but we spent
some time making sure that the various things you moved into the
prepare_setup_sigcontext() function were called under the same
circumstances as they were before, and there were no concerns there.
Kind regards,
Daniel
^ permalink raw reply
* Re: [RFC Qemu PATCH v2 1/2] spapr: drc: Add support for async hcalls at the drc level
From: David Gibson @ 2021-02-08 6:21 UTC (permalink / raw)
To: Shivaprasad G Bhat
Cc: xiaoguangrong.eric, mst, aneesh.kumar, linux-nvdimm, qemu-devel,
kvm-ppc, Greg Kurz, shivaprasadbhat, qemu-ppc, bharata, imammedo,
linuxppc-dev
In-Reply-To: <3b47312a-217f-8df5-0bfd-1a653598abad@linux.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 1890 bytes --]
On Tue, Jan 19, 2021 at 12:40:31PM +0530, Shivaprasad G Bhat wrote:
> Thanks for the comments!
>
>
> On 12/28/20 2:08 PM, David Gibson wrote:
>
> > On Mon, Dec 21, 2020 at 01:08:53PM +0100, Greg Kurz wrote:
> ...
> > > The overall idea looks good but I think you should consider using
> > > a thread pool to implement it. See below.
> > I am not convinced, however. Specifically, attaching this to the DRC
> > doesn't make sense to me. We're adding exactly one DRC related async
> > hcall, and I can't really see much call for another one. We could
> > have other async hcalls - indeed we already have one for HPT resizing
> > - but attaching this to DRCs doesn't help for those.
>
> The semantics of the hcall made me think, if this is going to be
> re-usable for future if implemented at DRC level.
It would only be re-usable for operations that are actually connected
to DRCs. It doesn't seem to me particularly likely that we'll ever
have more asynchronous hcalls that are also associated with DRCs.
> Other option
> is to move the async-hcall-state/list into the NVDIMMState structure
> in include/hw/mem/nvdimm.h and handle it with machine->nvdimms_state
> at a global level.
I'm ok with either of two options:
A) Implement this ad-hoc for this specific case, making whatever
simplifications you can based on this specific case.
B) Implement a general mechanism for async hcalls that is *not* tied
to DRCs. Then use that for the existing H_RESIZE_HPT_PREPARE call as
well as this new one.
> Hope you are okay with using the pool based approach that Greg
Honestly a thread pool seems like it might be overkill for this
application.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* [PATCH] powerpc/64s: syscall real mode entry use mtmsrd rather than rfid
From: Nicholas Piggin @ 2021-02-08 6:33 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Nicholas Piggin
Have the real mode system call entry handler branch to the kernel
0xc000... address and then use mtmsrd to enable the MMU, rather than use
SRRs and rfid.
Commit 8729c26e675c ("powerpc/64s/exception: Move real to virt switch
into the common handler") implemented this style of real mode entry for
other interrupt handlers, so this brings system calls into line with
them, which is the main motivcation for the change.
This tends to be slightly faster due to avoiding the mtsprs, and it also
does not clobber the SRR registers, which becomes important in a
subsequent change. The real mode entry points don't tend to be too
important for performance these days, but it is possible for a
hypervisor to run guests in AIL=0 mode for certian reasons.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/entry_64.S | 6 ++++++
arch/powerpc/kernel/exceptions-64s.S | 9 +++------
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 33ddfeef4fe9..993ed95ed602 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -225,6 +225,12 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_emulate)
b system_call_vectored_common
#endif
+ .balign IFETCH_ALIGN_BYTES
+ .globl system_call_common_real
+system_call_common_real:
+ ld r10,PACAKMSR(r13) /* get MSR value for kernel */
+ mtmsrd r10
+
.balign IFETCH_ALIGN_BYTES
.globl system_call_common
system_call_common:
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 5478ffa85603..dad35b59bcfb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1905,12 +1905,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
HMT_MEDIUM
.if ! \virt
- __LOAD_HANDLER(r10, system_call_common)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- RFI_TO_KERNEL
- b . /* prevent speculative execution */
+ __LOAD_HANDLER(r10, system_call_common_real)
+ mtctr r10
+ bctr
.else
li r10,MSR_RI
mtmsrd r10,1 /* Set RI (EE=0) */
--
2.23.0
^ permalink raw reply related
* [PATCH] powerpc/64s: Remove EXSLB interrupt save area
From: Nicholas Piggin @ 2021-02-08 6:34 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Nicholas Piggin
SLB faults should not be taken while the PACA save areas are live, all
memory accesses should be fetches from the kernel text, and access to
PACA and the current stack, before C code is called or any other
accesses are made.
All of these have pinned SLBs so will not take a SLB fault. Therefore
EXSLB is not be required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/paca.h | 3 +--
arch/powerpc/kernel/asm-offsets.c | 1 -
arch/powerpc/kernel/exceptions-64s.S | 5 -----
3 files changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 9454d29ff4b4..be0b00cb9fbb 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -108,8 +108,7 @@ struct paca_struct {
*/
/* used for most interrupts/exceptions */
u64 exgen[EX_SIZE] __attribute__((aligned(0x80)));
- u64 exslb[EX_SIZE]; /* used for SLB/segment table misses
- * on the linear mapping */
+
/* SLB related definitions */
u16 vmalloc_sllp;
u8 slb_cache_ptr;
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b12d7c049bfe..31edd9bbce75 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -255,7 +255,6 @@ int main(void)
#endif /* CONFIG_PPC_MM_SLICES */
OFFSET(PACA_EXGEN, paca_struct, exgen);
OFFSET(PACA_EXMC, paca_struct, exmc);
- OFFSET(PACA_EXSLB, paca_struct, exslb);
OFFSET(PACA_EXNMI, paca_struct, exnmi);
#ifdef CONFIG_PPC_PSERIES
OFFSET(PACALPPACAPTR, paca_struct, lppaca_ptr);
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index dad35b59bcfb..27fa80248406 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1392,13 +1392,9 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
* on user-handler data structures.
*
* KVM: Same as 0x300, DSLB must test for KVM guest.
- *
- * A dedicated save area EXSLB is used (XXX: but it actually need not be
- * these days, we could use EXGEN).
*/
INT_DEFINE_BEGIN(data_access_slb)
IVEC=0x380
- IAREA=PACA_EXSLB
IDAR=1
IKVM_SKIP=1
IKVM_REAL=1
@@ -1481,7 +1477,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
*/
INT_DEFINE_BEGIN(instruction_access_slb)
IVEC=0x480
- IAREA=PACA_EXSLB
IISIDE=1
IDAR=1
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
--
2.23.0
^ permalink raw reply related
* [PATCH] powerpc/32: Preserve cr1 in exception prolog stack check to fix build error
From: Christophe Leroy @ 2021-02-08 7:17 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
THREAD_ALIGN_SHIFT = THREAD_SHIFT + 1 = PAGE_SHIFT + 1
Maximum PAGE_SHIFT is 18 for 256k pages so
THREAD_ALIGN_SHIFT is 19 at the maximum.
No need to clobber cr1, it can be preserved when moving r1
into CR when we check stack overflow.
This reduces the number of instructions in Machine Check Exception
prolog and fixes a build failure reported by the kernel test robot
on v5.10 stable when building with RTAS + VMAP_STACK + KVM. That
build failure is due to too many instructions in the prolog hence
not fitting between 0x200 and 0x300. Allthough the problem doesn't
show up in mainline, it is still worth the change.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 98bf2d3f4970 ("powerpc/32s: Fix RTAS machine check with VMAP stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/head_32.h | 2 +-
arch/powerpc/kernel/head_book3s_32.S | 6 ------
2 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index a2f72c966baf..abc7b603ab65 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -47,7 +47,7 @@
lwz r1,TASK_STACK-THREAD(r1)
addi r1, r1, THREAD_SIZE - INT_FRAME_SIZE
1:
- mtcrf 0x7f, r1
+ mtcrf 0x3f, r1
bt 32 - THREAD_ALIGN_SHIFT, stack_overflow
#else
subi r11, r1, INT_FRAME_SIZE /* use r1 if kernel */
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 54140f4927e5..10e6aa88b1ff 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -278,12 +278,6 @@ MachineCheck:
7: EXCEPTION_PROLOG_2
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_CHRP
-#ifdef CONFIG_VMAP_STACK
- mfspr r4, SPRN_SPRG_THREAD
- tovirt(r4, r4)
- lwz r4, RTAS_SP(r4)
- cmpwi cr1, r4, 0
-#endif
beq cr1, machine_check_tramp
twi 31, 0, 0
#else
--
2.25.0
^ permalink raw reply related
* [powerpc][Oops] 5.11.0-rc6 boot failure on my lpar
From: Abdul Haleem @ 2021-02-08 9:05 UTC (permalink / raw)
To: linuxppc-dev
Cc: sachinp, sasi.thumati, linux-scsi, linux-kernel, linux-next,
Brian King, Andrew Morton, manjuhr1
[-- Attachment #1: Type: text/plain, Size: 8796 bytes --]
Greeting's
mainline 5.11.0-rc6 kernel panics when booting on my powerpc lpar with below message
sd 1:0:1:0: [sdg] Attached SCSI disk
sd 1:0:0:5: [sdf] Attached SCSI disk
sd 1:0:1:1: [sdh] Attached SCSI disk
sd 1:0:0:2: [sdc] Attached SCSI disk
qla2xxx [0012:01:00.1]-ffff:2: register_localport: host-traddr=nn-0x2000f4e9d454a70f:pn-0x2100f4e9d454a70f on portID:f1100
scsi 2:0:0:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:0:0: alua: supports implicit TPGS
scsi 2:0:0:0: alua: device naa.60050768108001b3a8000000000000cf port group 10 rel port 680
sd 2:0:0:0: Attached scsi generic sg12 type 0
sd 2:0:0:0: Power-on or device reset occurred
sd 2:0:0:0: [sdm] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:0: [sdm] Write Protect is off
scsi 2:0:0:1: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:0:0:1: alua: supports implicit TPGS
scsi 2:0:0:1: alua: device naa.60050768108001b3a8000000000000d0 port group 10 rel port 680
sd 2:0:0:1: Attached scsi generic sg13 type 0
sd 2:0:0:1: Power-on or device reset occurred
scsi 2:0:0:2: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:0:2: alua: supports implicit TPGS
scsi 2:0:0:2: alua: device naa.60050768108001b3a8000000000000d1 port group 10 rel port 680
sd 2:0:0:2: Attached scsi generic sg14 type 0
sd 2:0:0:2: Power-on or device reset occurred
scsi 2:0:0:3: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:0:3: alua: supports implicit TPGS
scsi 2:0:0:3: alua: device naa.60050768108001b3a8000000000000d2 port group 10 rel port 680
sd 2:0:0:3: Attached scsi generic sg15 type 0
sd 2:0:0:3: Power-on or device reset occurred
scsi 2:0:0:4: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdm] Attached SCSI disk
scsi 2:0:0:4: alua: supports implicit TPGS
scsi 2:0:0:4: alua: device naa.60050768108001b3a8000000000000d3 port group 10 rel port 680
sd 2:0:0:4: Attached scsi generic sg16 type 0
sd 2:0:0:4: Power-on or device reset occurred
scsi 2:0:0:5: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:0:5: alua: supports implicit TPGS
scsi 2:0:0:5: alua: device naa.60050768108001b3a8000000000000d4 port group 10 rel port 680
sd 2:0:0:5: Attached scsi generic sg17 type 0
sd 2:0:0:5: Power-on or device reset occurred
sd 2:0:0:0: alua: port group 10 state N non-preferred supports tolusna
sd 2:0:0:5: alua: port group 10 state A non-preferred supports tolusna
sd 2:0:0:4: alua: port group 10 state N non-preferred supports tolusna
sd 2:0:0:2: alua: port group 10 state N non-preferred supports tolusna
sd 2:0:0:1: alua: port group 10 state A non-preferred supports tolusna
sd 2:0:0:3: alua: port group 10 state A non-preferred supports tolusna
sd 2:0:0:1: [sdn] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:1: [sdn] Write Protect is off
sd 2:0:0:1: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:4: [sdq] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:3: [sdp] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:2: [sdo] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:2: [sdo] Write Protect is off
sd 2:0:0:4: [sdq] Write Protect is off
sd 2:0:0:2: [sdo] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:3: [sdp] Write Protect is off
sd 2:0:0:3: [sdp] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:4: [sdq] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:5: [sdr] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:0:5: [sdr] Write Protect is off
sd 2:0:0:5: [sdr] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:0:1: [sdn] Attached SCSI disk
sd 2:0:0:4: [sdq] Attached SCSI disk
sd 2:0:0:2: [sdo] Attached SCSI disk
sd 2:0:0:3: [sdp] Attached SCSI disk
sd 2:0:0:5: [sdr] Attached SCSI disk
scsi 2:0:1:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:1:0: alua: supports implicit TPGS
scsi 2:0:1:0: alua: device naa.60050768108001b3a8000000000000cf port group 11 rel port e80
sd 2:0:1:0: Attached scsi generic sg18 type 0
sd 2:0:1:0: Power-on or device reset occurred
scsi 2:0:1:1: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
sd 2:0:1:0: [sds] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:1:0: [sds] Write Protect is off
scsi 2:0:1:1: alua: supports implicit TPGS
scsi 2:0:1:1: alua: device naa.60050768108001b3a8000000000000d0 port group 11 rel port e80
sd 2:0:1:0: [sds] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:1:1: Attached scsi generic sg19 type 0
sd 2:0:1:1: Power-on or device reset occurred
scsi 2:0:1:2: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6
scsi 2:0:1:2: alua: supports implicit TPGS
scsi 2:0:1:2: alua: device naa.60050768108001b3a8000000000000d1 port group 11 rel port e80
BUG: Unable to handle kernel data access on write at 0xc009ffffff600098
Faulting instruction address: 0xc0000000000b8d30
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: sd_mod sg mlx5_core qla2xxx ibmvfc(+) ibmveth nvme_fc nvme_fabrics nvme_core mlxfw t10_pi ptp scsi_transport_fc pps_core dm_multipath dm_mirror dm_region_hash dm_log dm_mod
CPU: 17 PID: 610 Comm: kworker/u64:4 Not tainted 5.11.0-rc6-autotest-gb3d2c7b876d4 #2
Workqueue: scsi_wq_2 fc_scsi_scan_rport [scsi_transport_fc]
NIP: c0000000000b8d30 LR: c00000000036252c CTR: 0000000000000002
REGS: c000000005dbf210 TRAP: 0300 Not tainted (5.11.0-rc6-autotest-gb3d2c7b876d4)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44224280 XER: 0000000b
CFAR: c000000000010300 DAR: c009ffffff600098 DSISR: 02200000 IRQMASK: 0
GPR00: 0000000000000002 c000000005dbf4b0 c000000001969700 c009ffffff600098
GPR04: 0000000000000000 0000000000000018
sd 2:0:1:2: Power-on or device reset occurred
c009ffffff600098 0000000000000000
GPR08: c000000c7ffde780 c009fffffe000098 00000000000000b0 0000000000000010
GPR12: 000000000000000f c00000001ec0d600 0000000000000000 000000000000006d
GPR16: 0000000000000000 0000000000000000 0000000000000cc0 c000000001c02300
GPR20: c000000c7ffde500 c000000c7ffde610 0000000000000008 0000000000000cc0
GPR24: c00000000ff00208 0000000000000098 c0000000019b26a0 0000000000000000
GPR28: 0000000000000098 c0000000019b2260 0000000000000016 c00000000ff00180
NIP [c0000000000b8d30] memset+0x68/0x104
LR [c00000000036252c] pcpu_alloc+0x4ec/0xb20
Call Trace:
[c000000005dbf4b0] [c00000000036253c] pcpu_alloc+0x4fc/0xb20 (unreliable)
[c000000005dbf5c0] [c0000000004ab608] bdev_alloc+0xd8/0x170
[c000000005dbf610] [c0000000006295d0] __alloc_disk_node+0x80/0x160
[c000000005dbf690] [c0080000002d2ca0] sg_add_device+0x38/0x590 [sg]
[c000000005dbf760] [c0000000007d214c] device_add+0x61c/0xa70
[c000000005dbf860] [c000000000838d40] scsi_sysfs_add_sdev+0x260/0x3a0
[c000000005dbf8f0] [c0000000008333bc] scsi_probe_and_add_lun+0xb5c/0x1120
[c000000005dbfaa0] [c000000000834b04] __scsi_scan_target+0x624/0x780
[c000000005dbfbd0] [c000000000834e1c] scsi_scan_target+0x1bc/0x1e0
[c000000005dbfc30] [c008000000344738] fc_scsi_scan_rport+0xd0/0xe0 [scsi_transport_fc]
[c000000005dbfc60] [c00000000016fe00] process_one_work+0x260/0x530
[c000000005dbfd00] [c000000000170148] worker_thread+0x78/0x5f0
[c000000005dbfda0] [c00000000017a6a8] kthread+0x198/0x1a0
[c000000005dbfe10] [c00000000000daf0] ret_from_kernel_thread+0x5c/0x6c
Instruction dump:
409e000c b0860000 38c60002 409d000c 90860000 38c60004 78a0d183 78a506a0
7c0903a6 41820034 60000000 60000000 <f8860000> f8860008 f8860010 f8860018
---[ end trace c8bca8ca0f2b771c ]---
sd 2:0:1:0: [sds] Attached SCSI disk
sd 2:0:1:1: [sdt] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:1:1: [sdt] Write Protect is off
sd 2:0:1:1: [sdt] Mode Sense: 97 00 10 08
sd 2:0:1:1: [sdt] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:1:1: [sdt] Attached SCSI disk
sd 2:0:1:2: [sdu] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
sd 2:0:1:2: [sdu] Write Protect is off
sd 2:0:1:2: [sdu] Mode Sense: 97 00 10 08
sd 2:0:1:2: [sdu] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 2:0:1:2: [sdu] Attached SCSI disk
Kernel panic - not syncing: Fatal exception
The fault instruction is pointing to
gdb -batch vmlinux -ex 'list *(0xc0000000000b8d30)'
0xc0000000000b8d30 is at arch/powerpc/lib/mem_64.S:58.
53 3: srdi. r0,r5,6
54 clrldi r5,r5,58
55 mtctr r0
56 beq 5f
57 .balign 16
58 4: std r4,0(r6)
59 std r4,8(r6)
60 std r4,16(r6)
61 std r4,24(r6)
62 std r4,32(r6)
attaching the kernel config
Regard's
Abdul Haleem
IBM Linux technology Center
[-- Attachment #2: ZZ-VM-config.txt --]
[-- Type: text/plain, Size: 147144 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 4.13.0-rc3 Kernel Configuration
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
# CONFIG_POWER7_CPU is not set
CONFIG_POWER8_CPU=y
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_ICSWX=y
# CONFIG_PPC_ICSWX_PID is not set
# CONFIG_PPC_ICSWX_USE_SIGILL is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_RADIX_MMU=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_FORCE_SMP=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2048
CONFIG_PPC_DOORBELL=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_PPC64_BOOT_WRAPPER=y
CONFIG_64BIT=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=29
CONFIG_ARCH_MMAP_RND_BITS_MIN=14
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=13
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=7
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
CONFIG_PPC=y
# CONFIG_GENERIC_CSUM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_EPAPR_BOOT=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_EMULATE_SSTEP=y
CONFIG_ZONE_DMA32=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-autotest"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_BUILD_BIN2C is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=14
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=7
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_REL_CRCS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_XICS=y
CONFIG_PPC_ICP_NATIVE=y
CONFIG_PPC_ICP_HV=y
CONFIG_PPC_ICS_RTAS=y
CONFIG_PPC_XIVE=y
CONFIG_PPC_XIVE_NATIVE=y
CONFIG_PPC_SCOM=y
CONFIG_SCOM_DEBUGFS=y
# CONFIG_GE_FPGA is not set
#
# Platform support
#
CONFIG_PPC_POWERNV=y
CONFIG_OPAL_PRD=m
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_DTL=y
CONFIG_PSERIES_ENERGY=m
CONFIG_SCANLOG=y
CONFIG_IO_EVENT_IRQ=y
CONFIG_LPARCFG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=y
CONFIG_HV_PERF_CTRS=y
CONFIG_IBMVIO=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_DT_CPU_FTRS=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
CONFIG_EEH=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_P7_NAP=y
CONFIG_PPC_INDIRECT_PIO=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_POWERNV_CPUFREQ=y
#
# CPUIdle driver
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
#
# POWERPC CPU Idle Drivers
#
CONFIG_PSERIES_CPUIDLE=y
CONFIG_POWERNV_CPUIDLE=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_GEN_RTC is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_PPC_TRANSACTIONAL_MEM=y
# CONFIG_LD_HEAD_STUB_CATCH is not set
CONFIG_DISABLE_MPROFILE_KERNEL=y
# CONFIG_MPROFILE_KERNEL is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_RELOCATABLE=y
# CONFIG_RELOCATABLE_TEST is not set
CONFIG_CRASH_DUMP=y
CONFIG_FA_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_MEMORYLESS_NODES=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
# CONFIG_ZONE_DEVICE is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_4K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_THREAD_SHIFT=14
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_PPC_COPRO_BASE=y
CONFIG_SCHED_SMT=y
CONFIG_PPC_DENORMALISATION=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
# CONFIG_FSL_LBC is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MSI_IRQ_DOMAIN is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_POWERNV is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
#
# DesignWare PCI Core Support
#
#
# PCI host controller drivers
#
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
CONFIG_NONSTATIC_KERNEL=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_ARCH_RANDOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
# CONFIG_NFT_RT is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_SET_RBTREE is not set
# CONFIG_NFT_SET_HASH is not set
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_OBJREF is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
# CONFIG_NFT_FIB_IPV4 is not set
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_REDIR_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
# CONFIG_NFT_FIB_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SOFTING=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_GS_USB is not set
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_8DEV_USB=m
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_BCM is not set
# CONFIG_BT_HCIUART_QCA is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIUART_MRVL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_DEVLINK=m
CONFIG_MAY_USE_DEVLINK=m
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_SIMPLE_PM_BUS is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_AR7_PARTS is not set
#
# Partition parsers
#
#
# User Modules And Translation Layers
#
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_POWERNV_FLASH=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=1
# CONFIG_ECHO is not set
CONFIG_CXL_BASE=y
CONFIG_CXL_AFU_DRIVER_OPS=y
CONFIG_CXL_LIB=y
CONFIG_CXL=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_CXLFLASH=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVSCSIS=m
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_IBMVFC_TRACE=y
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_OF_PLATFORM=m
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
# CONFIG_GTP is not set
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
# CONFIG_AMD_XGBE_HAVE_ECC is not set
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_DCB=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_IBM=y
CONFIG_IBMVETH=m
# CONFIG_IBM_EMAC_ZMII is not set
# CONFIG_IBM_EMAC_RGMII is not set
# CONFIG_IBM_EMAC_TAH is not set
# CONFIG_IBM_EMAC_EMAC4 is not set
# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
CONFIG_IBMVNIC=m
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_I40EVF=m
CONFIG_FM10K=m
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_CORE_EN_DCB=y
# CONFIG_MLX5_CORE_IPOIB is not set
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SWITCHIB=m
CONFIG_MLXSW_SWITCHX2=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
# CONFIG_NFP_APP_FLOWER is not set
# CONFIG_NFP_DEBUG is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
CONFIG_MDIO_GPIO=m
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_ATUSB is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_MOXA is not set
CONFIG_SERIAL_OF_PLATFORM=m
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_OLD_HVSI is not set
CONFIG_HVC_OPAL=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IBM_BSR=m
CONFIG_POWERNV_OP_PANEL=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_POWERNV=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_PSERIES=m
CONFIG_HW_RANDOM_POWERNV=m
CONFIG_HW_RANDOM_TPM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_IBMVTPM=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_OPAL=m
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_XILINX is not set
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_TPIC2810 is not set
#
# MFD GPIO expanders
#
#
# PCI GPIO expanders
#
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_RDC321X is not set
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IBMPOWERNV=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_ALIM7101_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_MEN_A21_WDT is not set
CONFIG_WATCHDOG_RTAS=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# SDR tuner chips
#
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_DRM=m
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_VM=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
# CONFIG_DRM_AMDGPU_SI is not set
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_AMD_ACP is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_RCAR_DW_HDMI is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_LVDS_ENCODER is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=m
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_VGASTATE=m
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_SYNTH_EMUX=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=y
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
# CONFIG_USBIP_VHCI_HCD is not set
# CONFIG_USBIP_HOST is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_UCSI is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
CONFIG_PWRSEQ_EMMC=m
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_AT91 is not set
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
# CONFIG_MMC_SDHCI_OF_HLWD is not set
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
# CONFIG_MEMSTICK_REALTEK_USB is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_POWERNV=m
# CONFIG_LEDS_USER is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_QIB is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_INFINIBAND_I40IW=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
CONFIG_INFINIBAND_QEDR=m
# CONFIG_INFINIBAND_BNXT_RE is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_CPC925=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_HYM8563 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=m
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_OPAL=y
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_HT16K33 is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO_IOMMU_TYPE1 is not set
CONFIG_VFIO_IOMMU_SPAPR_TCE=m
CONFIG_VFIO_SPAPR_EEH=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV_TSCPAGE is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LNET is not set
# CONFIG_DGNC is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
#
# USB Power Delivery and Type-C drivers
#
# CONFIG_TYPEC_TCPM is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_OF_IOMMU=y
CONFIG_SPAPR_TCE_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_NVMEM=y
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
#
# FSI support
#
# CONFIG_FSI is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=m
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_INDEX is not set
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
CONFIG_DMA_VIRT_OPS=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_PARMAN is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_TEST_KMOD is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_HCALL_STATS is not set
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_JUMP_LABEL_FEATURE_CHECKS=y
# CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_PTDUMP is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_VPMSUM is not set
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_NX_COMPRESS=y
CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES=y
CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV=y
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VMX=y
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR_POSSIBLE=y
CONFIG_KVM_BOOK3S_HV_POSSIBLE=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
CONFIG_KVM_BOOK3S_64_PR=m
# CONFIG_KVM_BOOK3S_HV_EXIT_TIMING is not set
CONFIG_KVM_XICS=y
CONFIG_KVM_XIVE=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
^ permalink raw reply
* [PATCH] crypto: sha: remove unneeded semicolon
From: Yang Li @ 2021-02-08 9:10 UTC (permalink / raw)
To: herbert; +Cc: linux-kernel, paulus, linux-crypto, Yang Li, linuxppc-dev, davem
Eliminate the following coccicheck warning:
./arch/powerpc/crypto/sha1-spe-glue.c:110:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
---
arch/powerpc/crypto/sha1-spe-glue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/crypto/sha1-spe-glue.c b/arch/powerpc/crypto/sha1-spe-glue.c
index b1e577c..88e8ea7 100644
--- a/arch/powerpc/crypto/sha1-spe-glue.c
+++ b/arch/powerpc/crypto/sha1-spe-glue.c
@@ -107,7 +107,7 @@ static int ppc_spe_sha1_update(struct shash_desc *desc, const u8 *data,
src += bytes;
len -= bytes;
- };
+ }
memcpy((char *)sctx->buffer, src, len);
return 0;
--
1.8.3.1
^ permalink raw reply related
* Re: [PATCH v7 07/42] powerpc/fsl_booke/32: CacheLockingException remove args
From: Gautham R Shenoy @ 2021-02-08 10:04 UTC (permalink / raw)
To: Nicholas Piggin; +Cc: Athira Rajeev, linuxppc-dev
In-Reply-To: <20210130130852.2952424-8-npiggin@gmail.com>
On Sat, Jan 30, 2021 at 11:08:17PM +1000, Nicholas Piggin wrote:
> Like other interrupt handler conversions, switch to getting registers
> from the pt_regs argument.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
> arch/powerpc/kernel/head_fsl_booke.S | 6 +++---
> arch/powerpc/kernel/traps.c | 5 +++--
> 2 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
> index fdd4d274c245..0d4d9a6fcca1 100644
> --- a/arch/powerpc/kernel/head_fsl_booke.S
> +++ b/arch/powerpc/kernel/head_fsl_booke.S
> @@ -364,12 +364,12 @@ interrupt_base:
> /* Data Storage Interrupt */
> START_EXCEPTION(DataStorage)
> NORMAL_EXCEPTION_PROLOG(DATA_STORAGE)
> - mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
> + mfspr r5,SPRN_ESR /* Grab the ESR, save it3 */
^^^^^^^^^^
Sorry for the nitpick.. Should be "/* Grab the ESR, save it */"
> stw r5,_ESR(r11)
> - mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
> + mfspr r4,SPRN_DEAR /* Grab the DEAR, save it */
> + stw r4, _DEAR(r11)
> andis. r10,r5,(ESR_ILK|ESR_DLK)@h
> bne 1f
> - stw r4, _DEAR(r11)
> EXC_XFER_LITE(0x0300, handle_page_fault)
> 1:
> addi r3,r1,STACK_FRAME_OVERHEAD
> diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
> index 3ec7b443fe6b..1c77b1a8f7c9 100644
> --- a/arch/powerpc/kernel/traps.c
> +++ b/arch/powerpc/kernel/traps.c
> @@ -2062,9 +2062,10 @@ void altivec_assist_exception(struct pt_regs *regs)
> #endif /* CONFIG_ALTIVEC */
>
> #ifdef CONFIG_FSL_BOOKE
> -void CacheLockingException(struct pt_regs *regs, unsigned long address,
> - unsigned long error_code)
> +void CacheLockingException(struct pt_regs *regs)
> {
> + unsigned long error_code = regs->dsisr;
> +
> /* We treat cache locking instructions from the user
> * as priv ops, in the future we could try to do
> * something smarter
> --
> 2.23.0
>
^ permalink raw reply
* [PATCH] selftests/powerpc: remove unneeded semicolon
From: Yang Li @ 2021-02-08 10:41 UTC (permalink / raw)
To: shuah; +Cc: linux-kernel, paulus, linux-kselftest, Yang Li, linuxppc-dev
Eliminate the following coccicheck warning:
./tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c:327:4-5: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
---
tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
index 02dffb6..b099753 100644
--- a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
+++ b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
@@ -324,7 +324,7 @@ int compress_file(int argc, char **argv, void *handle)
fprintf(stderr, "error: cannot progress; ");
fprintf(stderr, "too many faults\n");
exit(-1);
- };
+ }
}
fault_tries = NX_MAX_FAULTS; /* Reset for the next chunk */
--
1.8.3.1
^ permalink raw reply related
* Re: [PATCH v2] powerpc/uprobes: Validation for prefixed instruction
From: Ravi Bangoria @ 2021-02-08 11:06 UTC (permalink / raw)
To: Oleg Nesterov
Cc: Ravi Bangoria, linux-kernel, rostedt, paulus, sandipan, jniethe5,
naveen.n.rao, linuxppc-dev
In-Reply-To: <20210206180604.GA8897@redhat.com>
On 2/6/21 11:36 PM, Oleg Nesterov wrote:
> On 02/04, Ravi Bangoria wrote:
>>
>> +static int get_instr(struct mm_struct *mm, unsigned long addr, u32 *instr)
>> +{
>> + struct page *page;
>> + struct vm_area_struct *vma;
>> + void *kaddr;
>> + unsigned int gup_flags = FOLL_FORCE | FOLL_SPLIT_PMD;
>> +
>> + if (get_user_pages_remote(mm, addr, 1, gup_flags, &page, &vma, NULL) <= 0)
>> + return -EINVAL;
>
> "vma" is not used,
Ok.
> and I don't think you need FOLL_SPLIT_PMD.
Isn't it needed if the target page is hugepage?
> Otherwise I can't really comment this ppc-specific change.
>
> To be honest, I don't even understand why do we need this fix. Sure, the
> breakpoint in the middle of 64-bit insn won't work, why do we care? The
> user should know what does he do.
That's a valid point. This patch is to protract user from doing
invalid thing.
Though, there is one minor scenario where this patch will help. If
the original prefixed instruction is 64 byte unaligned, and say
user probes it, Uprobe infrastructure will emulate such instruction
transparently without notifying user that the instruction is
improperly aligned.
> Not to mention we can't really trust get_user_pages() in that this page
> can be modified by mm owner or debugger...
As Naveen pointed out, there might be existing uprobe on the prefix
and this patch will fail to detect such scenario. So I'm thinking to
read the instruction directly from file backed page (like copy_insn),
in which case I won't use get_user_pages().
Thanks Oleg for the review!
Ravi
^ permalink raw reply
* Re: [PATCH v2] powerpc/uprobes: Validation for prefixed instruction
From: Ravi Bangoria @ 2021-02-08 11:08 UTC (permalink / raw)
To: Naveen N. Rao
Cc: Ravi Bangoria, oleg, rostedt, linux-kernel, paulus, sandipan,
jniethe5, naveen.n.rao, linuxppc-dev
In-Reply-To: <20210204131534.GL210@DESKTOP-TDPLP67.localdomain>
On 2/4/21 6:45 PM, Naveen N. Rao wrote:
> On 2021/02/04 04:19PM, Ravi Bangoria wrote:
>>
>>
>> On 2/4/21 4:17 PM, Ravi Bangoria wrote:
>>> Don't allow Uprobe on 2nd word of a prefixed instruction. As per
>>> ISA 3.1, prefixed instruction should not cross 64-byte boundary.
>>> So don't allow Uprobe on such prefixed instruction as well.
>>>
>>> There are two ways probed instruction is changed in mapped pages.
>>> First, when Uprobe is activated, it searches for all the relevant
>>> pages and replace instruction in them. In this case, if we notice
>>> that probe is on the 2nd word of prefixed instruction, error out
>>> directly. Second, when Uprobe is already active and user maps a
>>> relevant page via mmap(), instruction is replaced via mmap() code
>>> path. But because Uprobe is invalid, entire mmap() operation can
>>> not be stopped. In this case just print an error and continue.
>>
>> @mpe,
>>
>> arch_uprobe_analyze_insn() can return early if
>> cpu_has_feature(CPU_FTR_ARCH_31) is not set. But that will
>> miss out a rare scenario of user running binary with prefixed
>> instruction on p10 predecessors. Please let me know if I
>> should add cpu_has_feature(CPU_FTR_ARCH_31) or not.
>
> The check you are adding is very specific to prefixed instructions, so
> it makes sense to add a cpu feature check for v3.1.
>
> On older processors, those are invalid instructions like any other. The
> instruction emulation infrastructure will refuse to emulate it and the
> instruction will be single stepped.
Sure will add it.
Ravi
^ permalink raw reply
* Re: [PATCH v2] powerpc/uprobes: Validation for prefixed instruction
From: Ravi Bangoria @ 2021-02-08 11:10 UTC (permalink / raw)
To: Naveen N. Rao
Cc: Ravi Bangoria, oleg, rostedt, linux-kernel, paulus, sandipan,
jniethe5, naveen.n.rao, linuxppc-dev
In-Reply-To: <20210204161211.GM210@DESKTOP-TDPLP67.localdomain>
On 2/4/21 9:42 PM, Naveen N. Rao wrote:
> On 2021/02/04 06:38PM, Naveen N. Rao wrote:
>> On 2021/02/04 04:17PM, Ravi Bangoria wrote:
>>> Don't allow Uprobe on 2nd word of a prefixed instruction. As per
>>> ISA 3.1, prefixed instruction should not cross 64-byte boundary.
>>> So don't allow Uprobe on such prefixed instruction as well.
>>>
>>> There are two ways probed instruction is changed in mapped pages.
>>> First, when Uprobe is activated, it searches for all the relevant
>>> pages and replace instruction in them. In this case, if we notice
>>> that probe is on the 2nd word of prefixed instruction, error out
>>> directly. Second, when Uprobe is already active and user maps a
>>> relevant page via mmap(), instruction is replaced via mmap() code
>>> path. But because Uprobe is invalid, entire mmap() operation can
>>> not be stopped. In this case just print an error and continue.
>>>
>>> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
>>> ---
>>> v1: http://lore.kernel.org/r/20210119091234.76317-1-ravi.bangoria@linux.ibm.com
>>> v1->v2:
>>> - Instead of introducing new arch hook from verify_opcode(), use
>>> existing hook arch_uprobe_analyze_insn().
>>> - Add explicit check for prefixed instruction crossing 64-byte
>>> boundary. If probe is on such instruction, throw an error.
>>>
>>> arch/powerpc/kernel/uprobes.c | 66 ++++++++++++++++++++++++++++++++++-
>>> 1 file changed, 65 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c
>>> index e8a63713e655..485d19a2a31f 100644
>>> --- a/arch/powerpc/kernel/uprobes.c
>>> +++ b/arch/powerpc/kernel/uprobes.c
>>> @@ -7,6 +7,7 @@
>>> * Adapted from the x86 port by Ananth N Mavinakayanahalli <ananth@in.ibm.com>
>>> */
>>> #include <linux/kernel.h>
>>> +#include <linux/highmem.h>
>>> #include <linux/sched.h>
>>> #include <linux/ptrace.h>
>>> #include <linux/uprobes.h>
>>> @@ -28,6 +29,69 @@ bool is_trap_insn(uprobe_opcode_t *insn)
>>> return (is_trap(*insn));
>>> }
>>>
>>> +#ifdef CONFIG_PPC64
>>> +static int get_instr(struct mm_struct *mm, unsigned long addr, u32 *instr)
>>> +{
>>> + struct page *page;
>>> + struct vm_area_struct *vma;
>>> + void *kaddr;
>>> + unsigned int gup_flags = FOLL_FORCE | FOLL_SPLIT_PMD;
>>> +
>>> + if (get_user_pages_remote(mm, addr, 1, gup_flags, &page, &vma, NULL) <= 0)
>>> + return -EINVAL;
>>> +
>>> + kaddr = kmap_atomic(page);
>>> + *instr = *((u32 *)(kaddr + (addr & ~PAGE_MASK)));
>>> + kunmap_atomic(kaddr);
>>> + put_page(page);
>>> + return 0;
>>> +}
>>> +
>>> +static int validate_prefixed_instr(struct mm_struct *mm, unsigned long addr)
>>> +{
>>> + struct ppc_inst inst;
>>> + u32 prefix, suffix;
>>> +
>>> + /*
>>> + * No need to check if addr is pointing to beginning of the
>>> + * page. Even if probe is on a suffix of page-unaligned
>>> + * prefixed instruction, hw will raise exception and kernel
>>> + * will send SIGBUS.
>>> + */
>>> + if (!(addr & ~PAGE_MASK))
>>> + return 0;
>>> +
>>> + if (get_instr(mm, addr, &prefix) < 0)
>>> + return -EINVAL;
>>> + if (get_instr(mm, addr + 4, &suffix) < 0)
>>> + return -EINVAL;
>>> +
>>> + inst = ppc_inst_prefix(prefix, suffix);
>>> + if (ppc_inst_prefixed(inst) && (addr & 0x3F) == 0x3C) {
>>> + printk_ratelimited("Cannot register a uprobe on 64 byte "
>> ^^^^^^^^^^^^^^^^^^ pr_info_ratelimited()
>>
>> It should be sufficient to check the primary opcode to determine if it
>> is a prefixed instruction. You don't have to read the suffix. I see that
>> we don't have a helper to do this currently, so you could do:
>>
>> if (ppc_inst_primary_opcode(ppc_inst(prefix)) == 1)
>
> Seeing the kprobes code, I realized that we have to check for another
> scenario (Thanks, Jordan!). If this is the suffix of a prefix
> instruction for which a uprobe has already been installed, then the
> previous word will be a 'trap' instruction. You need to check if there
> is a uprobe at the previous word, and if the original instruction there
> was a prefix instruction.
Yes, this patch will fail to detect such scenario. I think I should
read the instruction directly from file, like what copy_insn() does.
With that, I'll get original instruction rather that 'trap'.
I'll think more along this line.
Ravi
^ permalink raw reply
* Re: [PATCH v2] powerpc/uprobes: Validation for prefixed instruction
From: Ravi Bangoria @ 2021-02-08 11:13 UTC (permalink / raw)
To: Naveen N. Rao
Cc: Ravi Bangoria, oleg, rostedt, linux-kernel, paulus, sandipan,
jniethe5, naveen.n.rao, linuxppc-dev
In-Reply-To: <20210204130821.GK210@DESKTOP-TDPLP67.localdomain>
On 2/4/21 6:38 PM, Naveen N. Rao wrote:
> On 2021/02/04 04:17PM, Ravi Bangoria wrote:
>> Don't allow Uprobe on 2nd word of a prefixed instruction. As per
>> ISA 3.1, prefixed instruction should not cross 64-byte boundary.
>> So don't allow Uprobe on such prefixed instruction as well.
>>
>> There are two ways probed instruction is changed in mapped pages.
>> First, when Uprobe is activated, it searches for all the relevant
>> pages and replace instruction in them. In this case, if we notice
>> that probe is on the 2nd word of prefixed instruction, error out
>> directly. Second, when Uprobe is already active and user maps a
>> relevant page via mmap(), instruction is replaced via mmap() code
>> path. But because Uprobe is invalid, entire mmap() operation can
>> not be stopped. In this case just print an error and continue.
>>
>> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
>> ---
>> v1: http://lore.kernel.org/r/20210119091234.76317-1-ravi.bangoria@linux.ibm.com
>> v1->v2:
>> - Instead of introducing new arch hook from verify_opcode(), use
>> existing hook arch_uprobe_analyze_insn().
>> - Add explicit check for prefixed instruction crossing 64-byte
>> boundary. If probe is on such instruction, throw an error.
>>
>> arch/powerpc/kernel/uprobes.c | 66 ++++++++++++++++++++++++++++++++++-
>> 1 file changed, 65 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c
>> index e8a63713e655..485d19a2a31f 100644
>> --- a/arch/powerpc/kernel/uprobes.c
>> +++ b/arch/powerpc/kernel/uprobes.c
>> @@ -7,6 +7,7 @@
>> * Adapted from the x86 port by Ananth N Mavinakayanahalli <ananth@in.ibm.com>
>> */
>> #include <linux/kernel.h>
>> +#include <linux/highmem.h>
>> #include <linux/sched.h>
>> #include <linux/ptrace.h>
>> #include <linux/uprobes.h>
>> @@ -28,6 +29,69 @@ bool is_trap_insn(uprobe_opcode_t *insn)
>> return (is_trap(*insn));
>> }
>>
>> +#ifdef CONFIG_PPC64
>> +static int get_instr(struct mm_struct *mm, unsigned long addr, u32 *instr)
>> +{
>> + struct page *page;
>> + struct vm_area_struct *vma;
>> + void *kaddr;
>> + unsigned int gup_flags = FOLL_FORCE | FOLL_SPLIT_PMD;
>> +
>> + if (get_user_pages_remote(mm, addr, 1, gup_flags, &page, &vma, NULL) <= 0)
>> + return -EINVAL;
>> +
>> + kaddr = kmap_atomic(page);
>> + *instr = *((u32 *)(kaddr + (addr & ~PAGE_MASK)));
>> + kunmap_atomic(kaddr);
>> + put_page(page);
>> + return 0;
>> +}
>> +
>> +static int validate_prefixed_instr(struct mm_struct *mm, unsigned long addr)
>> +{
>> + struct ppc_inst inst;
>> + u32 prefix, suffix;
>> +
>> + /*
>> + * No need to check if addr is pointing to beginning of the
>> + * page. Even if probe is on a suffix of page-unaligned
>> + * prefixed instruction, hw will raise exception and kernel
>> + * will send SIGBUS.
>> + */
>> + if (!(addr & ~PAGE_MASK))
>> + return 0;
>> +
>> + if (get_instr(mm, addr, &prefix) < 0)
>> + return -EINVAL;
>> + if (get_instr(mm, addr + 4, &suffix) < 0)
>> + return -EINVAL;
>> +
>> + inst = ppc_inst_prefix(prefix, suffix);
>> + if (ppc_inst_prefixed(inst) && (addr & 0x3F) == 0x3C) {
>> + printk_ratelimited("Cannot register a uprobe on 64 byte "
> ^^^^^^^^^^^^^^^^^^ pr_info_ratelimited()
>
> It should be sufficient to check the primary opcode to determine if it
> is a prefixed instruction. You don't have to read the suffix. I see that
> we don't have a helper to do this currently, so you could do:
>
> if (ppc_inst_primary_opcode(ppc_inst(prefix)) == 1)
Ok.
>
> In the future, it might be worthwhile to add IS_PREFIX() as a macro
> similar to IS_MTMSRD() if there are more such uses.
>
> Along with this, if you also add the below to the start of this
> function, you can get rid of the #ifdef:
>
> if (!IS_ENABLED(CONFIG_PPC64))
> return 0;
Yeah this is better.
Thanks for the review, Naveen!
Ravi
^ permalink raw reply
* Re: module loader dead code removal and cleanups v3
From: Jessica Yu @ 2021-02-08 11:36 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Petr Mladek, Joe Lawrence, Andrew Donnellan, linux-kbuild,
David Airlie, Masahiro Yamada, Jiri Kosina, Maarten Lankhorst,
linux-kernel, Maxime Ripard, live-patching, Michal Marek,
dri-devel, Thomas Zimmermann, Josh Poimboeuf, Frederic Barrat,
Daniel Vetter, Miroslav Benes, linuxppc-dev
In-Reply-To: <20210202121334.1361503-1-hch@lst.de>
+++ Christoph Hellwig [02/02/21 13:13 +0100]:
>Hi all,
>
>this series removes support for long term unused export types and
>cleans up various loose ends in the module loader.
>
>Changes since v2:
> - clean up klp_find_object_symbol a bit
> - remove the now unused module_assert_mutex helper
>
>Changes since v1:
> - move struct symsearch to module.c
> - rework drm to not call find_module at all
> - allow RCU-sched locking for find_module
> - keep find_module as a public API instead of module_loaded
> - update a few comments and commit logs
>
>Diffstat:
Queued on modules-next (along with the updated patch 10).
Thanks everyone,
Jessica
^ permalink raw reply
* Re: [PATCH v2 2/7] ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
From: Mark Brown @ 2021-02-08 11:51 UTC (permalink / raw)
To: Shengjiu Wang
Cc: devicetree, alsa-devel, timur, lgirdwood, linuxppc-dev, Xiubo.Lee,
linux-kernel, tiwai, nicoleotsuka, robh+dt, perex, festevam
In-Reply-To: <1612693435-31418-3-git-send-email-shengjiu.wang@nxp.com>
[-- Attachment #1: Type: text/plain, Size: 753 bytes --]
On Sun, Feb 07, 2021 at 06:23:50PM +0800, Shengjiu Wang wrote:
> +static int fsl_rpmsg_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
...
> + ret = clk_prepare_enable(rpmsg->mclk);
> + if (ret)
> + dev_err(dai->dev, "failed to enable mclk: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int fsl_rpmsg_hw_free(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + struct fsl_rpmsg *rpmsg = snd_soc_dai_get_drvdata(dai);
> +
> + clk_disable_unprepare(rpmsg->mclk);
hw_params() can be called multiple times and there's no need for it to
be balanced with hw_free(), I'd move this to a different callback (DAPM
should work well).
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH v7 07/42] powerpc/fsl_booke/32: CacheLockingException remove args
From: Michael Ellerman @ 2021-02-08 11:54 UTC (permalink / raw)
To: ego, Nicholas Piggin; +Cc: Athira Rajeev, linuxppc-dev
In-Reply-To: <20210208100411.GA18820@in.ibm.com>
Gautham R Shenoy <ego@linux.vnet.ibm.com> writes:
> On Sat, Jan 30, 2021 at 11:08:17PM +1000, Nicholas Piggin wrote:
>> Like other interrupt handler conversions, switch to getting registers
>> from the pt_regs argument.
>>
>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>> ---
>> arch/powerpc/kernel/head_fsl_booke.S | 6 +++---
>> arch/powerpc/kernel/traps.c | 5 +++--
>> 2 files changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
>> index fdd4d274c245..0d4d9a6fcca1 100644
>> --- a/arch/powerpc/kernel/head_fsl_booke.S
>> +++ b/arch/powerpc/kernel/head_fsl_booke.S
>> @@ -364,12 +364,12 @@ interrupt_base:
>> /* Data Storage Interrupt */
>> START_EXCEPTION(DataStorage)
>> NORMAL_EXCEPTION_PROLOG(DATA_STORAGE)
>> - mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
>> + mfspr r5,SPRN_ESR /* Grab the ESR, save it3 */
> ^^^^^^^^^^
> Sorry for the nitpick.. Should be "/* Grab the ESR, save it */"
Thanks, I fixed it up.
cheers
^ permalink raw reply
* [PATCH 1/2] powerpc/uaccess: Simplify unsafe_put_user() implementation
From: Michael Ellerman @ 2021-02-08 13:57 UTC (permalink / raw)
To: linuxppc-dev; +Cc: aik
Currently unsafe_put_user() expands to __put_user_goto(), which
expands to __put_user_nocheck_goto().
There are no other uses of __put_user_nocheck_goto(), and although
there are some other uses of __put_user_goto() those could just use
unsafe_put_user().
Every layer of indirection introduces the possibility that some code
is calling that layer, and makes keeping track of the required
semantics at each point more complicated.
So drop __put_user_goto(), and rename __put_user_nocheck_goto() to
__unsafe_put_user_goto(). The "nocheck" is implied by "unsafe".
Replace the few uses of __put_user_goto() with unsafe_put_user().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/include/asm/uaccess.h | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index efa4be2fa951..70347ee34c94 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -52,8 +52,6 @@ static inline bool __access_ok(unsigned long addr, unsigned long size)
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), true)
#define __put_user(x, ptr) \
__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-#define __put_user_goto(x, ptr, label) \
- __put_user_nocheck_goto((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), label)
#define __get_user_allowed(x, ptr) \
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
@@ -213,7 +211,7 @@ do { \
} \
} while (0)
-#define __put_user_nocheck_goto(x, ptr, size, label) \
+#define __unsafe_put_user_goto(x, ptr, size, label) \
do { \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
if (!is_kernel_addr((unsigned long)__pu_addr)) \
@@ -530,7 +528,8 @@ user_write_access_begin(const void __user *ptr, size_t len)
#define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0)
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
-#define unsafe_put_user(x, p, e) __put_user_goto(x, p, e)
+#define unsafe_put_user(x, p, e) \
+ __unsafe_put_user_goto((__typeof__(*(p)))(x), (p), sizeof(*(p)), e)
#define unsafe_copy_from_user(d, s, l, e) \
unsafe_op_wrap(__copy_tofrom_user((__force void __user *)d, s, l), e)
@@ -543,17 +542,17 @@ do { \
int _i; \
\
for (_i = 0; _i < (_len & ~(sizeof(long) - 1)); _i += sizeof(long)) \
- __put_user_goto(*(long*)(_src + _i), (long __user *)(_dst + _i), e);\
+ unsafe_put_user(*(long*)(_src + _i), (long __user *)(_dst + _i), e); \
if (IS_ENABLED(CONFIG_PPC64) && (_len & 4)) { \
- __put_user_goto(*(u32*)(_src + _i), (u32 __user *)(_dst + _i), e); \
+ unsafe_put_user(*(u32*)(_src + _i), (u32 __user *)(_dst + _i), e); \
_i += 4; \
} \
if (_len & 2) { \
- __put_user_goto(*(u16*)(_src + _i), (u16 __user *)(_dst + _i), e); \
+ unsafe_put_user(*(u16*)(_src + _i), (u16 __user *)(_dst + _i), e); \
_i += 2; \
} \
if (_len & 1) \
- __put_user_goto(*(u8*)(_src + _i), (u8 __user *)(_dst + _i), e);\
+ unsafe_put_user(*(u8*)(_src + _i), (u8 __user *)(_dst + _i), e); \
} while (0)
#define HAVE_GET_KERNEL_NOFAULT
--
2.25.1
^ permalink raw reply related
* [PATCH 2/2] powerpc/uaccess: Move might_fault() into user_access_begin()
From: Michael Ellerman @ 2021-02-08 13:57 UTC (permalink / raw)
To: linuxppc-dev; +Cc: aik
In-Reply-To: <20210208135717.2618798-1-mpe@ellerman.id.au>
We have a might_fault() check in __unsafe_put_user_goto(), but that is
dangerous as it potentially calls lots of code while user access is
enabled.
It also triggers the check Alexey added to the irq restore path to
catch cases like that:
WARNING: CPU: 30 PID: 1 at arch/powerpc/include/asm/book3s/64/kup.h:324 arch_local_irq_restore+0x160/0x190
NIP arch_local_irq_restore+0x160/0x190
LR lock_is_held_type+0x140/0x200
Call Trace:
0xc00000007f392ff8 (unreliable)
___might_sleep+0x180/0x320
__might_fault+0x50/0xe0
filldir64+0x2d0/0x5d0
call_filldir+0xc8/0x180
ext4_readdir+0x948/0xb40
iterate_dir+0x1ec/0x240
sys_getdents64+0x80/0x290
system_call_exception+0x160/0x280
system_call_common+0xf0/0x27c
So remove the might fault check from unsafe_put_user().
Any call to unsafe_put_user() must be inside a region that's had user
access enabled with user_access_begin(), so move the might_fault() in
there. That also allows us to drop the is_kernel_addr() test, because
there should be no code using user_access_begin() in order to access a
kernel address.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/include/asm/uaccess.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 70347ee34c94..71640eca7341 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -214,8 +214,6 @@ do { \
#define __unsafe_put_user_goto(x, ptr, size, label) \
do { \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- if (!is_kernel_addr((unsigned long)__pu_addr)) \
- might_fault(); \
__chk_user_ptr(ptr); \
__put_user_size_goto((x), __pu_addr, (size), label); \
} while (0)
@@ -494,6 +492,8 @@ extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
static __must_check inline bool user_access_begin(const void __user *ptr, size_t len)
{
+ might_fault();
+
if (unlikely(!access_ok(ptr, len)))
return false;
allow_read_write_user((void __user *)ptr, ptr, len);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 01/22] powerpc/32s: Add missing call to kuep_lock on syscall entry
From: Christophe Leroy @ 2021-02-08 15:10 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, npiggin,
msuchanek
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <cover.1612796617.git.christophe.leroy@csgroup.eu>
Userspace Execution protection and fast syscall entry were implemented
independently from each other and were both merged in kernel 5.2,
leading to syscall entry missing userspace execution protection.
On syscall entry, execution of user space memory must be
locked in the same way as on exception entry.
Fixes: b86fb88855ea ("powerpc/32: implement fast entry for syscalls on non BOOKE")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/entry_32.S | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index b102b40c4988..b1e36602c013 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -351,6 +351,9 @@ trace_syscall_entry_irq_off:
.globl transfer_to_syscall
transfer_to_syscall:
+#ifdef CONFIG_PPC_BOOK3S_32
+ kuep_lock r11, r12
+#endif
#ifdef CONFIG_TRACE_IRQFLAGS
andi. r12,r9,MSR_EE
beq- trace_syscall_entry_irq_off
--
2.25.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox