* [PATCH v4 20/46] KVM: PPC: Book3S HV P9: implement kvmppc_xive_pull_vcpu in C
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc
Cc: Alexey Kardashevskiy, linuxppc-dev, Cédric Le Goater,
Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This is more symmetric with kvmppc_xive_push_vcpu. The extra test in
the asm will go away in a later change.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/kvm_ppc.h | 2 ++
arch/powerpc/kvm/book3s_hv.c | 2 ++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 5 ++++
arch/powerpc/kvm/book3s_xive.c | 31 +++++++++++++++++++++++++
4 files changed, 40 insertions(+)
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 9531b1c1b190..73b1ca5a6471 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -672,6 +672,7 @@ extern int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval);
extern int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq,
int level, bool line_status);
extern void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu);
+extern void kvmppc_xive_pull_vcpu(struct kvm_vcpu *vcpu);
static inline int kvmppc_xive_enabled(struct kvm_vcpu *vcpu)
{
@@ -712,6 +713,7 @@ static inline int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval) { retur
static inline int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq,
int level, bool line_status) { return -ENODEV; }
static inline void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu) { }
+static inline void kvmppc_xive_pull_vcpu(struct kvm_vcpu *vcpu) { }
static inline int kvmppc_xive_enabled(struct kvm_vcpu *vcpu)
{ return 0; }
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index b822c573dc08..d28fb76b08e1 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3599,6 +3599,8 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
trap = __kvmhv_vcpu_entry_p9(vcpu);
+ kvmppc_xive_pull_vcpu(vcpu);
+
/* Advance host PURR/SPURR by the amount used by guest */
purr = mfspr(SPRN_PURR);
spurr = mfspr(SPRN_SPURR);
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 75405ef53238..c11597f815e4 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1442,6 +1442,11 @@ guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
bl kvmhv_accumulate_time
#endif
#ifdef CONFIG_KVM_XICS
+ /* If we came in through the P9 short path, xive pull is done in C */
+ lwz r0, STACK_SLOT_SHORT_PATH(r1)
+ cmpwi r0, 0
+ bne 1f
+
/* We are exiting, pull the VP from the XIVE */
lbz r0, VCPU_XIVE_PUSHED(r9)
cmpwi cr0, r0, 0
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index e7219b6f5f9a..741bf1f4387a 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -127,6 +127,37 @@ void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu)
}
EXPORT_SYMBOL_GPL(kvmppc_xive_push_vcpu);
+/*
+ * Pull a vcpu's context from the XIVE on guest exit.
+ * This assumes we are in virtual mode (MMU on)
+ */
+void kvmppc_xive_pull_vcpu(struct kvm_vcpu *vcpu)
+{
+ void __iomem *tima = local_paca->kvm_hstate.xive_tima_virt;
+
+ if (!vcpu->arch.xive_pushed)
+ return;
+
+ /*
+ * Should not have been pushed if there is no tima
+ */
+ if (WARN_ON(!tima))
+ return;
+
+ eieio();
+ /* First load to pull the context, we ignore the value */
+ __raw_readl(tima + TM_SPC_PULL_OS_CTX);
+ /* Second load to recover the context state (Words 0 and 1) */
+ vcpu->arch.xive_saved_state.w01 = __raw_readq(tima + TM_QW1_OS);
+
+ /* Fixup some of the state for the next load */
+ vcpu->arch.xive_saved_state.lsmfb = 0;
+ vcpu->arch.xive_saved_state.ack = 0xff;
+ vcpu->arch.xive_pushed = 0;
+ eieio();
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_pull_vcpu);
+
/*
* This is a simple trigger for a generic XIVE IRQ. This must
* only be called for interrupts that support a trigger page
--
2.23.0
^ permalink raw reply related
* [PATCH v4 19/46] KVM: PPC: Book3S HV P9: Move radix MMU switching instructions together
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Alexey Kardashevskiy, linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Switching the MMU from radix<->radix mode is tricky particularly as the
MMU can remain enabled and requires a certain sequence of SPR updates.
Move these together into their own functions.
This also includes the radix TLB check / flush because it's tied in to
MMU switching due to tlbiel getting LPID from LPIDR.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv.c | 66 +++++++++++++++++++++++-------------
1 file changed, 43 insertions(+), 23 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 7bb4222729b0..b822c573dc08 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3472,12 +3472,49 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
trace_kvmppc_run_core(vc, 1);
}
+static void switch_mmu_to_guest_radix(struct kvm *kvm, struct kvm_vcpu *vcpu, u64 lpcr)
+{
+ struct kvmppc_vcore *vc = vcpu->arch.vcore;
+ struct kvm_nested_guest *nested = vcpu->arch.nested;
+ u32 lpid;
+
+ lpid = nested ? nested->shadow_lpid : kvm->arch.lpid;
+
+ /*
+ * All the isync()s are overkill but trivially follow the ISA
+ * requirements. Some can likely be replaced with justification
+ * comment for why they are not needed.
+ */
+ isync();
+ mtspr(SPRN_LPID, lpid);
+ isync();
+ mtspr(SPRN_LPCR, lpcr);
+ isync();
+ mtspr(SPRN_PID, vcpu->arch.pid);
+ isync();
+
+ /* TLBIEL must have LPIDR set, so set guest LPID before flushing. */
+ kvmppc_check_need_tlb_flush(kvm, vc->pcpu, nested);
+}
+
+static void switch_mmu_to_host_radix(struct kvm *kvm, u32 pid)
+{
+ isync();
+ mtspr(SPRN_PID, pid);
+ isync();
+ mtspr(SPRN_LPID, kvm->arch.host_lpid);
+ isync();
+ mtspr(SPRN_LPCR, kvm->arch.host_lpcr);
+ isync();
+}
+
/*
* Load up hypervisor-mode registers on P9.
*/
static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
unsigned long lpcr)
{
+ struct kvm *kvm = vcpu->kvm;
struct kvmppc_vcore *vc = vcpu->arch.vcore;
s64 hdec;
u64 tb, purr, spurr;
@@ -3500,12 +3537,12 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
* P8 and P9 suppress the HDEC exception when LPCR[HDICE] = 0,
* so set HDICE before writing HDEC.
*/
- mtspr(SPRN_LPCR, vcpu->kvm->arch.host_lpcr | LPCR_HDICE);
+ mtspr(SPRN_LPCR, kvm->arch.host_lpcr | LPCR_HDICE);
isync();
hdec = time_limit - mftb();
if (hdec < 0) {
- mtspr(SPRN_LPCR, vcpu->kvm->arch.host_lpcr);
+ mtspr(SPRN_LPCR, kvm->arch.host_lpcr);
isync();
return BOOK3S_INTERRUPT_HV_DECREMENTER;
}
@@ -3540,7 +3577,6 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
}
mtspr(SPRN_CIABR, vcpu->arch.ciabr);
mtspr(SPRN_IC, vcpu->arch.ic);
- mtspr(SPRN_PID, vcpu->arch.pid);
mtspr(SPRN_PSSCR, vcpu->arch.psscr | PSSCR_EC |
(local_paca->kvm_hstate.fake_suspend << PSSCR_FAKE_SUSPEND_LG));
@@ -3554,8 +3590,7 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
mtspr(SPRN_AMOR, ~0UL);
- mtspr(SPRN_LPCR, lpcr);
- isync();
+ switch_mmu_to_guest_radix(kvm, vcpu, lpcr);
kvmppc_xive_push_vcpu(vcpu);
@@ -3594,7 +3629,6 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
mtspr(SPRN_DAWR1, host_dawr1);
mtspr(SPRN_DAWRX1, host_dawrx1);
}
- mtspr(SPRN_PID, host_pidr);
/*
* Since this is radix, do a eieio; tlbsync; ptesync sequence in
@@ -3609,9 +3643,6 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
if (cpu_has_feature(CPU_FTR_ARCH_31))
asm volatile(PPC_CP_ABORT);
- mtspr(SPRN_LPID, vcpu->kvm->arch.host_lpid); /* restore host LPID */
- isync();
-
vc->dpdes = mfspr(SPRN_DPDES);
vc->vtb = mfspr(SPRN_VTB);
mtspr(SPRN_DPDES, 0);
@@ -3628,7 +3659,8 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
}
mtspr(SPRN_HDEC, 0x7fffffff);
- mtspr(SPRN_LPCR, vcpu->kvm->arch.host_lpcr);
+
+ switch_mmu_to_host_radix(kvm, host_pidr);
return trap;
}
@@ -4161,7 +4193,7 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
{
struct kvm_run *run = vcpu->run;
int trap, r, pcpu;
- int srcu_idx, lpid;
+ int srcu_idx;
struct kvmppc_vcore *vc;
struct kvm *kvm = vcpu->kvm;
struct kvm_nested_guest *nested = vcpu->arch.nested;
@@ -4235,13 +4267,6 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
vc->vcore_state = VCORE_RUNNING;
trace_kvmppc_run_core(vc, 0);
- if (cpu_has_feature(CPU_FTR_HVMODE)) {
- lpid = nested ? nested->shadow_lpid : kvm->arch.lpid;
- mtspr(SPRN_LPID, lpid);
- isync();
- kvmppc_check_need_tlb_flush(kvm, pcpu, nested);
- }
-
guest_enter_irqoff();
srcu_idx = srcu_read_lock(&kvm->srcu);
@@ -4260,11 +4285,6 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
srcu_read_unlock(&kvm->srcu, srcu_idx);
- if (cpu_has_feature(CPU_FTR_HVMODE)) {
- mtspr(SPRN_LPID, kvm->arch.host_lpid);
- isync();
- }
-
set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
--
2.23.0
^ permalink raw reply related
* [PATCH v4 18/46] KVM: PPC: Book3S 64: Minimise hcall handler calling convention differences
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Alexey Kardashevskiy, linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This sets up the same calling convention from interrupt entry to
KVM interrupt handler for system calls as exists for other interrupt
types.
This is a better API, it uses a save area rather than SPR, and it has
more registers free to use. Using a single common API helps maintain
it, and it becomes easier to use in C in a later patch.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 21 +++++++++++++++-
arch/powerpc/kvm/book3s_64_entry.S | 37 +++++++++-------------------
2 files changed, 32 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 115cf79f3e82..4615057681c3 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1892,8 +1892,27 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100)
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
TRAMP_REAL_BEGIN(kvm_hcall)
+ std r9,PACA_EXGEN+EX_R9(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfcr r9
mfctr r10
- SET_SCRATCH0(r10) /* Save r13 in SCRATCH0 */
+ std r10,PACA_EXGEN+EX_R13(r13)
+ li r10,0
+ std r10,PACA_EXGEN+EX_CFAR(r13)
+ std r10,PACA_EXGEN+EX_CTR(r13)
+ /*
+ * Save the PPR (on systems that support it) before changing to
+ * HMT_MEDIUM. That allows the KVM code to save that value into the
+ * guest state (it is the guest's PPR value).
+ */
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_PPR
+ std r10,PACA_EXGEN+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
+ HMT_MEDIUM
+
#ifdef CONFIG_RELOCATABLE
/*
* Requires __LOAD_FAR_HANDLER beause kvmppc_hcall lives
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index b6149df21de3..de81ab69555b 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -11,33 +11,21 @@
* These are branched to from interrupt handlers in exception-64s.S which set
* IKVM_REAL or IKVM_VIRT, if HSTATE_IN_GUEST was found to be non-zero.
*/
+
+/*
+ * This is a hcall, so guest register call convention is as
+ * Documentation/powerpc/papr_hcalls.rst.
+ *
+ * The state of registers is as below, except CFAR is not saved, R13 is not
+ * in SCRATCH0, and R10 does not contain the trap.
+ */
.global kvmppc_hcall
.balign IFETCH_ALIGN_BYTES
kvmppc_hcall:
- /*
- * This is a hcall, so register convention is as
- * Documentation/powerpc/papr_hcalls.rst, with these additions:
- * R13 = PACA
- * guest R13 saved in SPRN_SCRATCH0
- * R10 = free
- * guest r10 saved in PACA_EXGEN
- */
- /*
- * Save the PPR (on systems that support it) before changing to
- * HMT_MEDIUM. That allows the KVM code to save that value into the
- * guest state (it is the guest's PPR value).
- */
-BEGIN_FTR_SECTION
- mfspr r10,SPRN_PPR
- std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
- HMT_MEDIUM
- mfcr r10
- std r12,HSTATE_SCRATCH0(r13)
- sldi r12,r10,32
- ori r12,r12,0xc00
- ld r10,PACA_EXGEN+EX_R10(r13)
- b do_kvm_interrupt
+ ld r10,PACA_EXGEN+EX_R13(r13)
+ SET_SCRATCH0(r10)
+ li r10,0xc00
+ /* Now we look like kvmppc_interrupt */
/*
* KVM interrupt entry occurs after GEN_INT_ENTRY runs, and follows that
@@ -84,7 +72,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r10,EX_R10(r11)
ld r11,EX_R11(r11)
-do_kvm_interrupt:
/*
* Hcalls and other interrupts come here after normalising register
* contents and save locations:
--
2.23.0
^ permalink raw reply related
* [PATCH v4 17/46] KVM: PPC: Book3S 64: move bad_host_intr check to HV handler
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Alexey Kardashevskiy, linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This is not used by PR KVM.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_64_entry.S | 3 ---
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 4 +++-
arch/powerpc/kvm/book3s_segment.S | 7 +++++++
3 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index 642d5fdc641e..b6149df21de3 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -100,11 +100,8 @@ do_kvm_interrupt:
beq- .Lmaybe_skip
.Lno_skip:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
- cmpwi r9,KVM_GUEST_MODE_HOST_HV
- beq kvmppc_bad_host_intr
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
cmpwi r9,KVM_GUEST_MODE_GUEST
- ld r9,HSTATE_SCRATCH2(r13)
beq kvmppc_interrupt_pr
#endif
b kvmppc_interrupt_hv
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index f976efb7e4a9..75405ef53238 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1265,6 +1265,7 @@ hdec_soon:
kvmppc_interrupt_hv:
/*
* Register contents:
+ * R9 = HSTATE_IN_GUEST
* R12 = (guest CR << 32) | interrupt vector
* R13 = PACA
* guest R12 saved in shadow VCPU SCRATCH0
@@ -1272,6 +1273,8 @@ kvmppc_interrupt_hv:
* guest R9 saved in HSTATE_SCRATCH2
*/
/* We're now back in the host but in guest MMU context */
+ cmpwi r9,KVM_GUEST_MODE_HOST_HV
+ beq kvmppc_bad_host_intr
li r9, KVM_GUEST_MODE_HOST_HV
stb r9, HSTATE_IN_GUEST(r13)
@@ -3272,7 +3275,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_P9_TM_HV_ASSIST)
* cfar is saved in HSTATE_CFAR(r13)
* ppr is saved in HSTATE_PPR(r13)
*/
-.global kvmppc_bad_host_intr
kvmppc_bad_host_intr:
/*
* Switch to the emergency stack, but start half-way down in
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
index 1f492aa4c8d6..ef1d88b869bf 100644
--- a/arch/powerpc/kvm/book3s_segment.S
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -167,8 +167,15 @@ kvmppc_interrupt_pr:
* R12 = (guest CR << 32) | exit handler id
* R13 = PACA
* HSTATE.SCRATCH0 = guest R12
+ *
+ * If HV is possible, additionally:
+ * R9 = HSTATE_IN_GUEST
+ * HSTATE.SCRATCH2 = guest R9
*/
#ifdef CONFIG_PPC64
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ ld r9,HSTATE_SCRATCH2(r13)
+#endif
/* Match 32-bit entry */
rotldi r12, r12, 32 /* Flip R12 halves for stw */
stw r12, HSTATE_SCRATCH1(r13) /* CR is now in the low half */
--
2.23.0
^ permalink raw reply related
* [PATCH v4 16/46] KVM: PPC: Book3S 64: Move interrupt early register setup to KVM
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Like the earlier patch for hcalls, KVM interrupt entry requires a
different calling convention than the Linux interrupt handlers
set up. Move the code that converts from one to the other into KVM.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 131 +++++----------------------
arch/powerpc/kvm/book3s_64_entry.S | 50 +++++++++-
2 files changed, 71 insertions(+), 110 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index a23feaa445b5..115cf79f3e82 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -187,7 +187,6 @@ do_define_int n
.endif
.endm
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
/*
* All interrupts which set HSRR registers, as well as SRESET and MCE and
* syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken,
@@ -220,54 +219,25 @@ do_define_int n
* to KVM to handle.
*/
-.macro KVMTEST name
+.macro KVMTEST name handler
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
lbz r10,HSTATE_IN_GUEST(r13)
cmpwi r10,0
- bne \name\()_kvm
-.endm
-
-.macro GEN_KVM name
- .balign IFETCH_ALIGN_BYTES
-\name\()_kvm:
-
-BEGIN_FTR_SECTION
- ld r10,IAREA+EX_CFAR(r13)
- std r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
-
- ld r10,IAREA+EX_CTR(r13)
- mtctr r10
-BEGIN_FTR_SECTION
- ld r10,IAREA+EX_PPR(r13)
- std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
- ld r11,IAREA+EX_R11(r13)
- ld r12,IAREA+EX_R12(r13)
- std r12,HSTATE_SCRATCH0(r13)
- sldi r12,r9,32
- ld r9,IAREA+EX_R9(r13)
- ld r10,IAREA+EX_R10(r13)
/* HSRR variants have the 0x2 bit added to their trap number */
.if IHSRR_IF_HVMODE
BEGIN_FTR_SECTION
- ori r12,r12,(IVEC + 0x2)
+ li r10,(IVEC + 0x2)
FTR_SECTION_ELSE
- ori r12,r12,(IVEC)
+ li r10,(IVEC)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
.elseif IHSRR
- ori r12,r12,(IVEC+ 0x2)
+ li r10,(IVEC + 0x2)
.else
- ori r12,r12,(IVEC)
+ li r10,(IVEC)
.endif
- b kvmppc_interrupt
-.endm
-
-#else
-.macro KVMTEST name
-.endm
-.macro GEN_KVM name
-.endm
+ bne \handler
#endif
+.endm
/*
* This is the BOOK3S interrupt entry code macro.
@@ -409,7 +379,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
DEFINE_FIXED_SYMBOL(\name\()_common_real)
\name\()_common_real:
.if IKVM_REAL
- KVMTEST \name
+ KVMTEST \name kvm_interrupt
.endif
ld r10,PACAKMSR(r13) /* get MSR value for kernel */
@@ -432,7 +402,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_real)
DEFINE_FIXED_SYMBOL(\name\()_common_virt)
\name\()_common_virt:
.if IKVM_VIRT
- KVMTEST \name
+ KVMTEST \name kvm_interrupt
1:
.endif
.endif /* IVIRT */
@@ -446,7 +416,7 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
DEFINE_FIXED_SYMBOL(\name\()_common_real)
\name\()_common_real:
.if IKVM_REAL
- KVMTEST \name
+ KVMTEST \name kvm_interrupt
.endif
.endm
@@ -967,8 +937,6 @@ EXC_COMMON_BEGIN(system_reset_common)
EXCEPTION_RESTORE_REGS
RFI_TO_USER_OR_KERNEL
- GEN_KVM system_reset
-
/**
* Interrupt 0x200 - Machine Check Interrupt (MCE).
@@ -1132,7 +1100,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
/*
* Check if we are coming from guest. If yes, then run the normal
* exception handler which will take the
- * machine_check_kvm->kvmppc_interrupt branch to deliver the MC event
+ * machine_check_kvm->kvm_interrupt branch to deliver the MC event
* to guest.
*/
lbz r11,HSTATE_IN_GUEST(r13)
@@ -1203,8 +1171,6 @@ EXC_COMMON_BEGIN(machine_check_common)
bl machine_check_exception
b interrupt_return
- GEN_KVM machine_check
-
#ifdef CONFIG_PPC_P7_NAP
/*
@@ -1339,8 +1305,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
REST_NVGPRS(r1)
b interrupt_return
- GEN_KVM data_access
-
/**
* Interrupt 0x380 - Data Segment Interrupt (DSLB).
@@ -1390,8 +1354,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
bl do_bad_slb_fault
b interrupt_return
- GEN_KVM data_access_slb
-
/**
* Interrupt 0x400 - Instruction Storage Interrupt (ISI).
@@ -1428,8 +1390,6 @@ MMU_FTR_SECTION_ELSE
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
b interrupt_return
- GEN_KVM instruction_access
-
/**
* Interrupt 0x480 - Instruction Segment Interrupt (ISLB).
@@ -1474,8 +1434,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
bl do_bad_slb_fault
b interrupt_return
- GEN_KVM instruction_access_slb
-
/**
* Interrupt 0x500 - External Interrupt.
@@ -1521,8 +1479,6 @@ EXC_COMMON_BEGIN(hardware_interrupt_common)
bl do_IRQ
b interrupt_return
- GEN_KVM hardware_interrupt
-
/**
* Interrupt 0x600 - Alignment Interrupt
@@ -1550,8 +1506,6 @@ EXC_COMMON_BEGIN(alignment_common)
REST_NVGPRS(r1) /* instruction emulation may change GPRs */
b interrupt_return
- GEN_KVM alignment
-
/**
* Interrupt 0x700 - Program Interrupt (program check).
@@ -1659,8 +1613,6 @@ EXC_COMMON_BEGIN(program_check_common)
REST_NVGPRS(r1) /* instruction emulation may change GPRs */
b interrupt_return
- GEN_KVM program_check
-
/*
* Interrupt 0x800 - Floating-Point Unavailable Interrupt.
@@ -1710,8 +1662,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
b interrupt_return
#endif
- GEN_KVM fp_unavailable
-
/**
* Interrupt 0x900 - Decrementer Interrupt.
@@ -1751,8 +1701,6 @@ EXC_COMMON_BEGIN(decrementer_common)
bl timer_interrupt
b interrupt_return
- GEN_KVM decrementer
-
/**
* Interrupt 0x980 - Hypervisor Decrementer Interrupt.
@@ -1798,8 +1746,6 @@ EXC_COMMON_BEGIN(hdecrementer_common)
ld r13,PACA_EXGEN+EX_R13(r13)
HRFI_TO_KERNEL
- GEN_KVM hdecrementer
-
/**
* Interrupt 0xa00 - Directed Privileged Doorbell Interrupt.
@@ -1840,8 +1786,6 @@ EXC_COMMON_BEGIN(doorbell_super_common)
#endif
b interrupt_return
- GEN_KVM doorbell_super
-
EXC_REAL_NONE(0xb00, 0x100)
EXC_VIRT_NONE(0x4b00, 0x100)
@@ -1891,7 +1835,7 @@ INT_DEFINE_END(system_call)
GET_PACA(r13)
std r10,PACA_EXGEN+EX_R10(r13)
INTERRUPT_TO_KERNEL
- KVMTEST system_call /* uses r10, branch to system_call_kvm */
+ KVMTEST system_call kvm_hcall /* uses r10, branch to kvm_hcall */
mfctr r9
#else
mr r9,r13
@@ -1947,7 +1891,7 @@ EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100)
EXC_VIRT_END(system_call, 0x4c00, 0x100)
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-TRAMP_REAL_BEGIN(system_call_kvm)
+TRAMP_REAL_BEGIN(kvm_hcall)
mfctr r10
SET_SCRATCH0(r10) /* Save r13 in SCRATCH0 */
#ifdef CONFIG_RELOCATABLE
@@ -1987,8 +1931,6 @@ EXC_COMMON_BEGIN(single_step_common)
bl single_step_exception
b interrupt_return
- GEN_KVM single_step
-
/**
* Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI).
@@ -2027,8 +1969,6 @@ MMU_FTR_SECTION_ELSE
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX)
b interrupt_return
- GEN_KVM h_data_storage
-
/**
* Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI).
@@ -2054,8 +1994,6 @@ EXC_COMMON_BEGIN(h_instr_storage_common)
bl unknown_exception
b interrupt_return
- GEN_KVM h_instr_storage
-
/**
* Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt.
@@ -2080,8 +2018,6 @@ EXC_COMMON_BEGIN(emulation_assist_common)
REST_NVGPRS(r1) /* instruction emulation may change GPRs */
b interrupt_return
- GEN_KVM emulation_assist
-
/**
* Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI).
@@ -2153,8 +2089,6 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
EXCEPTION_RESTORE_REGS hsrr=1
GEN_INT_ENTRY hmi_exception, virt=0
- GEN_KVM hmi_exception_early
-
EXC_COMMON_BEGIN(hmi_exception_common)
GEN_COMMON hmi_exception
FINISH_NAP
@@ -2162,8 +2096,6 @@ EXC_COMMON_BEGIN(hmi_exception_common)
bl handle_hmi_exception
b interrupt_return
- GEN_KVM hmi_exception
-
/**
* Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt.
@@ -2195,8 +2127,6 @@ EXC_COMMON_BEGIN(h_doorbell_common)
#endif
b interrupt_return
- GEN_KVM h_doorbell
-
/**
* Interrupt 0xea0 - Hypervisor Virtualization Interrupt.
@@ -2224,8 +2154,6 @@ EXC_COMMON_BEGIN(h_virt_irq_common)
bl do_IRQ
b interrupt_return
- GEN_KVM h_virt_irq
-
EXC_REAL_NONE(0xec0, 0x20)
EXC_VIRT_NONE(0x4ec0, 0x20)
@@ -2270,8 +2198,6 @@ EXC_COMMON_BEGIN(performance_monitor_common)
bl performance_monitor_exception
b interrupt_return
- GEN_KVM performance_monitor
-
/**
* Interrupt 0xf20 - Vector Unavailable Interrupt.
@@ -2321,8 +2247,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
bl altivec_unavailable_exception
b interrupt_return
- GEN_KVM altivec_unavailable
-
/**
* Interrupt 0xf40 - VSX Unavailable Interrupt.
@@ -2371,8 +2295,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
bl vsx_unavailable_exception
b interrupt_return
- GEN_KVM vsx_unavailable
-
/**
* Interrupt 0xf60 - Facility Unavailable Interrupt.
@@ -2401,8 +2323,6 @@ EXC_COMMON_BEGIN(facility_unavailable_common)
REST_NVGPRS(r1) /* instruction emulation may change GPRs */
b interrupt_return
- GEN_KVM facility_unavailable
-
/**
* Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt.
@@ -2431,8 +2351,6 @@ EXC_COMMON_BEGIN(h_facility_unavailable_common)
REST_NVGPRS(r1) /* XXX Shouldn't be necessary in practice */
b interrupt_return
- GEN_KVM h_facility_unavailable
-
EXC_REAL_NONE(0xfa0, 0x20)
EXC_VIRT_NONE(0x4fa0, 0x20)
@@ -2462,8 +2380,6 @@ EXC_COMMON_BEGIN(cbe_system_error_common)
bl cbe_system_error_exception
b interrupt_return
- GEN_KVM cbe_system_error
-
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1200, 0x100)
EXC_VIRT_NONE(0x5200, 0x100)
@@ -2489,8 +2405,6 @@ EXC_COMMON_BEGIN(instruction_breakpoint_common)
bl instruction_breakpoint_exception
b interrupt_return
- GEN_KVM instruction_breakpoint
-
EXC_REAL_NONE(0x1400, 0x100)
EXC_VIRT_NONE(0x5400, 0x100)
@@ -2611,8 +2525,6 @@ EXC_COMMON_BEGIN(denorm_exception_common)
bl unknown_exception
b interrupt_return
- GEN_KVM denorm_exception
-
#ifdef CONFIG_CBE_RAS
INT_DEFINE_BEGIN(cbe_maintenance)
@@ -2630,8 +2542,6 @@ EXC_COMMON_BEGIN(cbe_maintenance_common)
bl cbe_maintenance_exception
b interrupt_return
- GEN_KVM cbe_maintenance
-
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1600, 0x100)
EXC_VIRT_NONE(0x5600, 0x100)
@@ -2662,8 +2572,6 @@ EXC_COMMON_BEGIN(altivec_assist_common)
#endif
b interrupt_return
- GEN_KVM altivec_assist
-
#ifdef CONFIG_CBE_RAS
INT_DEFINE_BEGIN(cbe_thermal)
@@ -2681,8 +2589,6 @@ EXC_COMMON_BEGIN(cbe_thermal_common)
bl cbe_thermal_exception
b interrupt_return
- GEN_KVM cbe_thermal
-
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1800, 0x100)
EXC_VIRT_NONE(0x5800, 0x100)
@@ -2935,6 +2841,15 @@ TRAMP_REAL_BEGIN(rfscv_flush_fallback)
USE_TEXT_SECTION()
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+kvm_interrupt:
+ /*
+ * The conditional branch in KVMTEST can't reach all the way,
+ * make a stub.
+ */
+ b kvmppc_interrupt
+#endif
+
_GLOBAL(do_uaccess_flush)
UACCESS_FLUSH_FIXUP_SECTION
nop
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index dea8c5bb207b..642d5fdc641e 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -37,15 +37,61 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
sldi r12,r10,32
ori r12,r12,0xc00
ld r10,PACA_EXGEN+EX_R10(r13)
+ b do_kvm_interrupt
+/*
+ * KVM interrupt entry occurs after GEN_INT_ENTRY runs, and follows that
+ * call convention:
+ *
+ * guest R9-R13, CTR, CFAR, PPR saved in PACA EX_xxx save area
+ * guest (H)DAR, (H)DSISR are also in the save area for relevant interrupts
+ * guest R13 also saved in SCRATCH0
+ * R13 = PACA
+ * R11 = (H)SRR0
+ * R12 = (H)SRR1
+ * R9 = guest CR
+ * PPR is set to medium
+ *
+ * With the addition for KVM:
+ * R10 = trap vector
+ */
.global kvmppc_interrupt
.balign IFETCH_ALIGN_BYTES
kvmppc_interrupt:
+ li r11,PACA_EXGEN
+ cmpdi r10,0x200
+ bgt+ 1f
+ li r11,PACA_EXMC
+ beq 1f
+ li r11,PACA_EXNMI
+1: add r11,r11,r13
+
+BEGIN_FTR_SECTION
+ ld r12,EX_CFAR(r11)
+ std r12,HSTATE_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ ld r12,EX_CTR(r11)
+ mtctr r12
+BEGIN_FTR_SECTION
+ ld r12,EX_PPR(r11)
+ std r12,HSTATE_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ ld r12,EX_R12(r11)
+ std r12,HSTATE_SCRATCH0(r13)
+ sldi r12,r9,32
+ or r12,r12,r10
+ ld r9,EX_R9(r11)
+ ld r10,EX_R10(r11)
+ ld r11,EX_R11(r11)
+
+do_kvm_interrupt:
/*
- * Register contents:
+ * Hcalls and other interrupts come here after normalising register
+ * contents and save locations:
+ *
* R12 = (guest CR << 32) | interrupt vector
* R13 = PACA
- * guest R12 saved in shadow VCPU SCRATCH0
+ * guest R12 saved in shadow HSTATE_SCRATCH0
* guest R13 saved in SPRN_SCRATCH0
*/
std r9,HSTATE_SCRATCH2(r13)
--
2.23.0
^ permalink raw reply related
* [PATCH v4 15/46] KVM: PPC: Book3S 64: Move hcall early register setup to KVM
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
System calls / hcalls have a different calling convention than
other interrupts, so there is code in the KVMTEST to massage these
into the same form as other interrupt handlers.
Move this work into the KVM hcall handler. This means teaching KVM
a little more about the low level interrupt handler setup, PACA save
areas, etc., although that's not obviously worse than the current
approach of coming up with an entirely different interrupt register
/ save convention.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/exception-64s.h | 13 ++++++++
arch/powerpc/kernel/exceptions-64s.S | 42 +-----------------------
arch/powerpc/kvm/book3s_64_entry.S | 23 +++++++++++++
3 files changed, 37 insertions(+), 41 deletions(-)
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index c1a8aac01cf9..bb6f78fcf981 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -35,6 +35,19 @@
/* PACA save area size in u64 units (exgen, exmc, etc) */
#define EX_SIZE 10
+/* PACA save area offsets */
+#define EX_R9 0
+#define EX_R10 8
+#define EX_R11 16
+#define EX_R12 24
+#define EX_R13 32
+#define EX_DAR 40
+#define EX_DSISR 48
+#define EX_CCR 52
+#define EX_CFAR 56
+#define EX_PPR 64
+#define EX_CTR 72
+
/*
* maximum recursive depth of MCE exceptions
*/
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 98bf73df0f57..a23feaa445b5 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -21,22 +21,6 @@
#include <asm/feature-fixups.h>
#include <asm/kup.h>
-/* PACA save area offsets (exgen, exmc, etc) */
-#define EX_R9 0
-#define EX_R10 8
-#define EX_R11 16
-#define EX_R12 24
-#define EX_R13 32
-#define EX_DAR 40
-#define EX_DSISR 48
-#define EX_CCR 52
-#define EX_CFAR 56
-#define EX_PPR 64
-#define EX_CTR 72
-.if EX_SIZE != 10
- .error "EX_SIZE is wrong"
-.endif
-
/*
* Following are fixed section helper macros.
*
@@ -1964,29 +1948,8 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100)
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
TRAMP_REAL_BEGIN(system_call_kvm)
- /*
- * This is a hcall, so register convention is as above, with these
- * differences:
- * r13 = PACA
- * ctr = orig r13
- * orig r10 saved in PACA
- */
- /*
- * Save the PPR (on systems that support it) before changing to
- * HMT_MEDIUM. That allows the KVM code to save that value into the
- * guest state (it is the guest's PPR value).
- */
-BEGIN_FTR_SECTION
- mfspr r10,SPRN_PPR
- std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
- HMT_MEDIUM
mfctr r10
- SET_SCRATCH0(r10)
- mfcr r10
- std r12,HSTATE_SCRATCH0(r13)
- sldi r12,r10,32
- ori r12,r12,0xc00
+ SET_SCRATCH0(r10) /* Save r13 in SCRATCH0 */
#ifdef CONFIG_RELOCATABLE
/*
* Requires __LOAD_FAR_HANDLER beause kvmppc_hcall lives
@@ -1994,15 +1957,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
*/
__LOAD_FAR_HANDLER(r10, kvmppc_hcall)
mtctr r10
- ld r10,PACA_EXGEN+EX_R10(r13)
bctr
#else
- ld r10,PACA_EXGEN+EX_R10(r13)
b kvmppc_hcall
#endif
#endif
-
/**
* Interrupt 0xd00 - Trace Interrupt.
* This is a synchronous interrupt in response to instruction step or
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index 8cf5e24a81eb..dea8c5bb207b 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -14,6 +14,29 @@
.global kvmppc_hcall
.balign IFETCH_ALIGN_BYTES
kvmppc_hcall:
+ /*
+ * This is a hcall, so register convention is as
+ * Documentation/powerpc/papr_hcalls.rst, with these additions:
+ * R13 = PACA
+ * guest R13 saved in SPRN_SCRATCH0
+ * R10 = free
+ * guest r10 saved in PACA_EXGEN
+ */
+ /*
+ * Save the PPR (on systems that support it) before changing to
+ * HMT_MEDIUM. That allows the KVM code to save that value into the
+ * guest state (it is the guest's PPR value).
+ */
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_PPR
+ std r10,HSTATE_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ HMT_MEDIUM
+ mfcr r10
+ std r12,HSTATE_SCRATCH0(r13)
+ sldi r12,r10,32
+ ori r12,r12,0xc00
+ ld r10,PACA_EXGEN+EX_R10(r13)
.global kvmppc_interrupt
.balign IFETCH_ALIGN_BYTES
--
2.23.0
^ permalink raw reply related
* [PATCH v4 14/46] KVM: PPC: Book3S 64: add hcall interrupt handler
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Fabiano Rosas, linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Add a separate hcall entry point. This can be used to deal with the
different calling convention.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 6 +++---
arch/powerpc/kvm/book3s_64_entry.S | 6 +++++-
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 16fbfde960e7..98bf73df0f57 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1989,16 +1989,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ori r12,r12,0xc00
#ifdef CONFIG_RELOCATABLE
/*
- * Requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives
+ * Requires __LOAD_FAR_HANDLER beause kvmppc_hcall lives
* outside the head section.
*/
- __LOAD_FAR_HANDLER(r10, kvmppc_interrupt)
+ __LOAD_FAR_HANDLER(r10, kvmppc_hcall)
mtctr r10
ld r10,PACA_EXGEN+EX_R10(r13)
bctr
#else
ld r10,PACA_EXGEN+EX_R10(r13)
- b kvmppc_interrupt
+ b kvmppc_hcall
#endif
#endif
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index a5412e24cc05..8cf5e24a81eb 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -8,9 +8,13 @@
#include <asm/reg.h>
/*
- * This is branched to from interrupt handlers in exception-64s.S which set
+ * These are branched to from interrupt handlers in exception-64s.S which set
* IKVM_REAL or IKVM_VIRT, if HSTATE_IN_GUEST was found to be non-zero.
*/
+.global kvmppc_hcall
+.balign IFETCH_ALIGN_BYTES
+kvmppc_hcall:
+
.global kvmppc_interrupt
.balign IFETCH_ALIGN_BYTES
kvmppc_interrupt:
--
2.23.0
^ permalink raw reply related
* [PATCH v4 13/46] KVM: PPC: Book3S 64: Move GUEST_MODE_SKIP test into KVM
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Fabiano Rosas, linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Move the GUEST_MODE_SKIP logic into KVM code. This is quite a KVM
internal detail that has no real need to be in common handlers.
Also add a comment explaining why this thing exists.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 60 ----------------------------
arch/powerpc/kvm/book3s_64_entry.S | 51 ++++++++++++++++++++++-
2 files changed, 50 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 162595af1ac7..16fbfde960e7 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -133,7 +133,6 @@ name:
#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */
-#define IKVM_SKIP .L_IKVM_SKIP_\name\() /* Generate KVM skip handler */
#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */
#define __IKVM_REAL(name) .L_IKVM_REAL_ ## name
#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */
@@ -190,9 +189,6 @@ do_define_int n
.ifndef IMASK
IMASK=0
.endif
- .ifndef IKVM_SKIP
- IKVM_SKIP=0
- .endif
.ifndef IKVM_REAL
IKVM_REAL=0
.endif
@@ -250,15 +246,10 @@ do_define_int n
.balign IFETCH_ALIGN_BYTES
\name\()_kvm:
- .if IKVM_SKIP
- cmpwi r10,KVM_GUEST_MODE_SKIP
- beq 89f
- .else
BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,HSTATE_CFAR(r13)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
- .endif
ld r10,IAREA+EX_CTR(r13)
mtctr r10
@@ -285,27 +276,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ori r12,r12,(IVEC)
.endif
b kvmppc_interrupt
-
- .if IKVM_SKIP
-89: mtocrf 0x80,r9
- ld r10,IAREA+EX_CTR(r13)
- mtctr r10
- ld r9,IAREA+EX_R9(r13)
- ld r10,IAREA+EX_R10(r13)
- ld r11,IAREA+EX_R11(r13)
- ld r12,IAREA+EX_R12(r13)
- .if IHSRR_IF_HVMODE
- BEGIN_FTR_SECTION
- b kvmppc_skip_Hinterrupt
- FTR_SECTION_ELSE
- b kvmppc_skip_interrupt
- ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
- .elseif IHSRR
- b kvmppc_skip_Hinterrupt
- .else
- b kvmppc_skip_interrupt
- .endif
- .endif
.endm
#else
@@ -1083,7 +1053,6 @@ INT_DEFINE_BEGIN(machine_check)
ISET_RI=0
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(machine_check)
@@ -1356,7 +1325,6 @@ INT_DEFINE_BEGIN(data_access)
IVEC=0x300
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(data_access)
@@ -1410,7 +1378,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
INT_DEFINE_BEGIN(data_access_slb)
IVEC=0x380
IDAR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(data_access_slb)
@@ -2080,7 +2047,6 @@ INT_DEFINE_BEGIN(h_data_storage)
IHSRR=1
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
IKVM_VIRT=1
INT_DEFINE_END(h_data_storage)
@@ -3024,32 +2990,6 @@ EXPORT_SYMBOL(do_uaccess_flush)
MASKED_INTERRUPT
MASKED_INTERRUPT hsrr=1
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-kvmppc_skip_interrupt:
- /*
- * Here all GPRs are unchanged from when the interrupt happened
- * except for r13, which is saved in SPRG_SCRATCH0.
- */
- mfspr r13, SPRN_SRR0
- addi r13, r13, 4
- mtspr SPRN_SRR0, r13
- GET_SCRATCH0(r13)
- RFI_TO_KERNEL
- b .
-
-kvmppc_skip_Hinterrupt:
- /*
- * Here all GPRs are unchanged from when the interrupt happened
- * except for r13, which is saved in SPRG_SCRATCH0.
- */
- mfspr r13, SPRN_HSRR0
- addi r13, r13, 4
- mtspr SPRN_HSRR0, r13
- GET_SCRATCH0(r13)
- HRFI_TO_KERNEL
- b .
-#endif
-
/*
* Relocation-on interrupts: A subset of the interrupts can be delivered
* with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index 7a039ea78f15..a5412e24cc05 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <asm/asm-offsets.h>
#include <asm/cache.h>
+#include <asm/exception-64s.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_book3s_asm.h>
#include <asm/ppc_asm.h>
@@ -20,9 +21,12 @@ kvmppc_interrupt:
* guest R12 saved in shadow VCPU SCRATCH0
* guest R13 saved in SPRN_SCRATCH0
*/
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
std r9,HSTATE_SCRATCH2(r13)
lbz r9,HSTATE_IN_GUEST(r13)
+ cmpwi r9,KVM_GUEST_MODE_SKIP
+ beq- .Lmaybe_skip
+.Lno_skip:
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
cmpwi r9,KVM_GUEST_MODE_HOST_HV
beq kvmppc_bad_host_intr
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
@@ -34,3 +38,48 @@ kvmppc_interrupt:
#else
b kvmppc_interrupt_pr
#endif
+
+/*
+ * KVM uses a trick where it is running in MSR[HV]=1 mode in real-mode with the
+ * guest MMU context loaded, and it sets KVM_GUEST_MODE_SKIP and enables
+ * MSR[DR]=1 while leaving MSR[IR]=0, so it continues to fetch HV instructions
+ * but loads and stores will access the guest context. This is used to load
+ * the faulting instruction without walking page tables.
+ *
+ * However the guest context may not be able to translate, or it may cause a
+ * machine check or other issue, which will result in a fault in the host
+ * (even with KVM-HV).
+ *
+ * These faults are caught here and if the fault was (or was likely) due to
+ * that load, then we just return with the PC advanced +4 and skip the load,
+ * which then goes to the slow path and walks the page tables.
+ */
+.Lmaybe_skip:
+ cmpwi r12,BOOK3S_INTERRUPT_MACHINE_CHECK
+ beq 1f
+ cmpwi r12,BOOK3S_INTERRUPT_DATA_STORAGE
+ beq 1f
+ cmpwi r12,BOOK3S_INTERRUPT_DATA_SEGMENT
+ beq 1f
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ /* HSRR interrupts have 2 added to trap vector */
+ cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE | 0x2
+ beq 2f
+#endif
+ b .Lno_skip
+1: mfspr r9,SPRN_SRR0
+ addi r9,r9,4
+ mtspr SPRN_SRR0,r9
+ ld r12,HSTATE_SCRATCH0(r13)
+ ld r9,HSTATE_SCRATCH2(r13)
+ GET_SCRATCH0(r13)
+ RFI_TO_KERNEL
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+2: mfspr r9,SPRN_HSRR0
+ addi r9,r9,4
+ mtspr SPRN_HSRR0,r9
+ ld r12,HSTATE_SCRATCH0(r13)
+ ld r9,HSTATE_SCRATCH2(r13)
+ GET_SCRATCH0(r13)
+ HRFI_TO_KERNEL
+#endif
--
2.23.0
^ permalink raw reply related
* [PATCH v4 12/46] KVM: PPC: Book3S 64: move KVM interrupt entry to a common entry point
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Fabiano Rosas, linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Rather than bifurcate the call depending on whether or not HV is
possible, and have the HV entry test for PR, just make a single
common point which does the demultiplexing. This makes it simpler
to add another type of exit handler.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 8 +-----
arch/powerpc/kvm/Makefile | 3 +++
arch/powerpc/kvm/book3s_64_entry.S | 36 +++++++++++++++++++++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 11 ++------
4 files changed, 42 insertions(+), 16 deletions(-)
create mode 100644 arch/powerpc/kvm/book3s_64_entry.S
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index c9c446ccff54..162595af1ac7 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -208,7 +208,6 @@ do_define_int n
.endm
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
* All interrupts which set HSRR registers, as well as SRESET and MCE and
* syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken,
@@ -238,13 +237,8 @@ do_define_int n
/*
* If an interrupt is taken while a guest is running, it is immediately routed
- * to KVM to handle. If both HV and PR KVM arepossible, KVM interrupts go first
- * to kvmppc_interrupt_hv, which handles the PR guest case.
+ * to KVM to handle.
*/
-#define kvmppc_interrupt kvmppc_interrupt_hv
-#else
-#define kvmppc_interrupt kvmppc_interrupt_pr
-#endif
.macro KVMTEST name
lbz r10,HSTATE_IN_GUEST(r13)
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 2bfeaa13befb..cdd119028f64 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -59,6 +59,9 @@ kvm-pr-y := \
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
tm.o
+kvm-book3s_64-builtin-objs-y += \
+ book3s_64_entry.o
+
ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
book3s_rmhandlers.o
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
new file mode 100644
index 000000000000..7a039ea78f15
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_book3s_asm.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+
+/*
+ * This is branched to from interrupt handlers in exception-64s.S which set
+ * IKVM_REAL or IKVM_VIRT, if HSTATE_IN_GUEST was found to be non-zero.
+ */
+.global kvmppc_interrupt
+.balign IFETCH_ALIGN_BYTES
+kvmppc_interrupt:
+ /*
+ * Register contents:
+ * R12 = (guest CR << 32) | interrupt vector
+ * R13 = PACA
+ * guest R12 saved in shadow VCPU SCRATCH0
+ * guest R13 saved in SPRN_SCRATCH0
+ */
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ std r9,HSTATE_SCRATCH2(r13)
+ lbz r9,HSTATE_IN_GUEST(r13)
+ cmpwi r9,KVM_GUEST_MODE_HOST_HV
+ beq kvmppc_bad_host_intr
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ cmpwi r9,KVM_GUEST_MODE_GUEST
+ ld r9,HSTATE_SCRATCH2(r13)
+ beq kvmppc_interrupt_pr
+#endif
+ b kvmppc_interrupt_hv
+#else
+ b kvmppc_interrupt_pr
+#endif
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 5e634db4809b..f976efb7e4a9 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1269,16 +1269,8 @@ kvmppc_interrupt_hv:
* R13 = PACA
* guest R12 saved in shadow VCPU SCRATCH0
* guest R13 saved in SPRN_SCRATCH0
+ * guest R9 saved in HSTATE_SCRATCH2
*/
- std r9, HSTATE_SCRATCH2(r13)
- lbz r9, HSTATE_IN_GUEST(r13)
- cmpwi r9, KVM_GUEST_MODE_HOST_HV
- beq kvmppc_bad_host_intr
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
- cmpwi r9, KVM_GUEST_MODE_GUEST
- ld r9, HSTATE_SCRATCH2(r13)
- beq kvmppc_interrupt_pr
-#endif
/* We're now back in the host but in guest MMU context */
li r9, KVM_GUEST_MODE_HOST_HV
stb r9, HSTATE_IN_GUEST(r13)
@@ -3280,6 +3272,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_P9_TM_HV_ASSIST)
* cfar is saved in HSTATE_CFAR(r13)
* ppr is saved in HSTATE_PPR(r13)
*/
+.global kvmppc_bad_host_intr
kvmppc_bad_host_intr:
/*
* Switch to the emergency stack, but start half-way down in
--
2.23.0
^ permalink raw reply related
* [PATCH v4 11/46] KVM: PPC: Book3S HV: Ensure MSR[HV] is always clear in guest MSR
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Rather than clear the HV bit from the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to set the bit.
The HV clear is kept in guest entry for now, but a future patch will
warn if it's not present.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv_builtin.c | 4 ++--
arch/powerpc/kvm/book3s_hv_nested.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 41cb03d0bde4..7a0e33a9c980 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -662,8 +662,8 @@ static void kvmppc_end_cede(struct kvm_vcpu *vcpu)
void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
{
- /* Guest must always run with ME enabled. */
- msr = msr | MSR_ME;
+ /* Guest must always run with ME enabled, HV disabled. */
+ msr = (msr | MSR_ME) & ~MSR_HV;
/*
* Check for illegal transactional state bit combination
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 886c7fa86add..d192e799c0af 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -329,8 +329,8 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
vcpu->arch.nested_vcpu_id = l2_hv.vcpu_token;
vcpu->arch.regs = l2_regs;
- /* Guest must always run with ME enabled. */
- vcpu->arch.shregs.msr = vcpu->arch.regs.msr | MSR_ME;
+ /* Guest must always run with ME enabled, HV disabled. */
+ vcpu->arch.shregs.msr = (vcpu->arch.regs.msr | MSR_ME) & ~MSR_HV;
sanitise_hv_regs(vcpu, &l2_hv);
restore_hv_regs(vcpu, &l2_hv);
--
2.23.0
^ permalink raw reply related
* [PATCH v4 10/46] KVM: PPC: Book3S HV: Ensure MSR[ME] is always set in guest MSR
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Fabiano Rosas, linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Rather than add the ME bit to the MSR at guest entry, make it clear
that the hypervisor does not allow the guest to clear the bit.
The ME set is kept in guest entry for now, but a future patch will
warn if it's not present.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv_builtin.c | 3 +++
arch/powerpc/kvm/book3s_hv_nested.c | 4 +++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 158d309b42a3..41cb03d0bde4 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -662,6 +662,9 @@ static void kvmppc_end_cede(struct kvm_vcpu *vcpu)
void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
{
+ /* Guest must always run with ME enabled. */
+ msr = msr | MSR_ME;
+
/*
* Check for illegal transactional state bit combination
* and if we find it, force the TS field to a safe state.
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 851e3f527eb2..886c7fa86add 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -328,7 +328,9 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
vcpu->arch.nested = l2;
vcpu->arch.nested_vcpu_id = l2_hv.vcpu_token;
vcpu->arch.regs = l2_regs;
- vcpu->arch.shregs.msr = vcpu->arch.regs.msr;
+
+ /* Guest must always run with ME enabled. */
+ vcpu->arch.shregs.msr = vcpu->arch.regs.msr | MSR_ME;
sanitise_hv_regs(vcpu, &l2_hv);
restore_hv_regs(vcpu, &l2_hv);
--
2.23.0
^ permalink raw reply related
* [PATCH v4 09/46] powerpc/64s: remove KVM SKIP test from instruction breakpoint handler
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Fabiano Rosas, linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
The code being executed in KVM_GUEST_MODE_SKIP is hypervisor code with
MSR[IR]=0, so the faults of concern are the d-side ones caused by access
to guest context by the hypervisor.
Instruction breakpoint interrupts are not a concern here. It's unlikely
any good would come of causing breaks in this code, but skipping the
instruction that caused it won't help matters (e.g., skip the mtmsr that
sets MSR[DR]=0 or clears KVM_GUEST_MODE_SKIP).
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index a0515cb829c2..c9c446ccff54 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -2553,7 +2553,6 @@ EXC_VIRT_NONE(0x5200, 0x100)
INT_DEFINE_BEGIN(instruction_breakpoint)
IVEC=0x1300
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
- IKVM_SKIP=1
IKVM_REAL=1
#endif
INT_DEFINE_END(instruction_breakpoint)
--
2.23.0
^ permalink raw reply related
* [PATCH v4 08/46] powerpc/64s: Remove KVM handler support from CBE_RAS interrupts
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin, Fabiano Rosas
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Cell does not support KVM.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8082b690e874..a0515cb829c2 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -2530,8 +2530,6 @@ EXC_VIRT_NONE(0x5100, 0x100)
INT_DEFINE_BEGIN(cbe_system_error)
IVEC=0x1200
IHSRR=1
- IKVM_SKIP=1
- IKVM_REAL=1
INT_DEFINE_END(cbe_system_error)
EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100)
@@ -2701,8 +2699,6 @@ EXC_COMMON_BEGIN(denorm_exception_common)
INT_DEFINE_BEGIN(cbe_maintenance)
IVEC=0x1600
IHSRR=1
- IKVM_SKIP=1
- IKVM_REAL=1
INT_DEFINE_END(cbe_maintenance)
EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100)
@@ -2754,8 +2750,6 @@ EXC_COMMON_BEGIN(altivec_assist_common)
INT_DEFINE_BEGIN(cbe_thermal)
IVEC=0x1800
IHSRR=1
- IKVM_SKIP=1
- IKVM_REAL=1
INT_DEFINE_END(cbe_thermal)
EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100)
--
2.23.0
^ permalink raw reply related
* [PATCH v4 07/46] KVM: PPC: Book3S HV: Fix CONFIG_SPAPR_TCE_IOMMU=n default hcalls
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This config option causes the warning in init_default_hcalls to fire
because the TCE handlers are in the default hcall list but not
implemented.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 7cfaabab2c20..7bb4222729b0 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5401,8 +5401,10 @@ static unsigned int default_hcall_list[] = {
H_READ,
H_PROTECT,
H_BULK_REMOVE,
+#ifdef CONFIG_SPAPR_TCE_IOMMU
H_GET_TCE,
H_PUT_TCE,
+#endif
H_SET_DABR,
H_SET_XDABR,
H_CEDE,
--
2.23.0
^ permalink raw reply related
* [PATCH v4 06/46] KVM: PPC: Book3S HV: remove unused kvmppc_h_protect argument
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin, Daniel Axtens
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
The va argument is not used in the function or set by its asm caller,
so remove it to be safe.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/kvm_ppc.h | 3 +--
arch/powerpc/kvm/book3s_hv_rm_mmu.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 8aacd76bb702..9531b1c1b190 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -767,8 +767,7 @@ long kvmppc_h_remove(struct kvm_vcpu *vcpu, unsigned long flags,
unsigned long pte_index, unsigned long avpn);
long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu);
long kvmppc_h_protect(struct kvm_vcpu *vcpu, unsigned long flags,
- unsigned long pte_index, unsigned long avpn,
- unsigned long va);
+ unsigned long pte_index, unsigned long avpn);
long kvmppc_h_read(struct kvm_vcpu *vcpu, unsigned long flags,
unsigned long pte_index);
long kvmppc_h_clear_ref(struct kvm_vcpu *vcpu, unsigned long flags,
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 88da2764c1bb..7af7c70f1468 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -673,8 +673,7 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu)
}
long kvmppc_h_protect(struct kvm_vcpu *vcpu, unsigned long flags,
- unsigned long pte_index, unsigned long avpn,
- unsigned long va)
+ unsigned long pte_index, unsigned long avpn)
{
struct kvm *kvm = vcpu->kvm;
__be64 *hpte;
--
2.23.0
^ permalink raw reply related
* [PATCH v4 05/46] KVM: PPC: Book3S HV: Remove redundant mtspr PSPB
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: Daniel Axtens, linuxppc-dev, Nicholas Piggin, Fabiano Rosas
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This SPR is set to 0 twice when exiting the guest.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 1ffb0902e779..7cfaabab2c20 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3781,7 +3781,6 @@ static int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
mtspr(SPRN_DSCR, host_dscr);
mtspr(SPRN_TIDR, host_tidr);
mtspr(SPRN_IAMR, host_iamr);
- mtspr(SPRN_PSPB, 0);
if (host_amr != vcpu->arch.amr)
mtspr(SPRN_AMR, host_amr);
--
2.23.0
^ permalink raw reply related
* [PATCH v4 04/46] KVM: PPC: Book3S HV: Prevent radix guests from setting LPCR[TC]
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This bit only applies to hash partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv.c | 6 ++++++
arch/powerpc/kvm/book3s_hv_nested.c | 3 +--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c5de7e3f22b6..1ffb0902e779 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1645,6 +1645,12 @@ static int kvm_arch_vcpu_ioctl_set_sregs_hv(struct kvm_vcpu *vcpu,
*/
unsigned long kvmppc_filter_lpcr_hv(struct kvmppc_vcore *vc, unsigned long lpcr)
{
+ struct kvm *kvm = vc->kvm;
+
+ /* LPCR_TC only applies to HPT guests */
+ if (kvm_is_radix(kvm))
+ lpcr &= ~LPCR_TC;
+
/* On POWER8 and above, userspace can modify AIL */
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
lpcr &= ~LPCR_AIL;
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index f7b441b3eb17..851e3f527eb2 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -140,8 +140,7 @@ static void sanitise_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr)
/*
* Don't let L1 change LPCR bits for the L2 except these:
*/
- mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD |
- LPCR_LPES | LPCR_MER;
+ mask = LPCR_DPFD | LPCR_ILE | LPCR_AIL | LPCR_LD | LPCR_LPES | LPCR_MER;
hr->lpcr = kvmppc_filter_lpcr_hv(vc,
(vc->lpcr & ~mask) | (hr->lpcr & mask));
--
2.23.0
^ permalink raw reply related
* [PATCH v4 03/46] KVM: PPC: Book3S HV: Disallow LPCR[AIL] to be set to 1 or 2
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin, Fabiano Rosas
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
These are already disallowed by H_SET_MODE from the guest, also disallow
these by updating LPCR directly.
AIL modes can affect the host interrupt behaviour while the guest LPCR
value is set, so filter it here too.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c4539c38c639..c5de7e3f22b6 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -803,7 +803,10 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
vcpu->arch.dawrx1 = value2;
return H_SUCCESS;
case H_SET_MODE_RESOURCE_ADDR_TRANS_MODE:
- /* KVM does not support mflags=2 (AIL=2) */
+ /*
+ * KVM does not support mflags=2 (AIL=2) and AIL=1 is reserved.
+ * Keep this in synch with kvmppc_filter_guest_lpcr_hv.
+ */
if (mflags != 0 && mflags != 3)
return H_UNSUPPORTED_FLAG_START;
return H_TOO_HARD;
@@ -1645,6 +1648,8 @@ unsigned long kvmppc_filter_lpcr_hv(struct kvmppc_vcore *vc, unsigned long lpcr)
/* On POWER8 and above, userspace can modify AIL */
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
lpcr &= ~LPCR_AIL;
+ if ((lpcr & LPCR_AIL) != LPCR_AIL_3)
+ lpcr &= ~LPCR_AIL; /* LPCR[AIL]=1/2 is disallowed */
/*
* On POWER9, allow userspace to enable large decrementer for the
--
2.23.0
^ permalink raw reply related
* [PATCH v4 02/46] KVM: PPC: Book3S HV: Add a function to filter guest LPCR bits
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
Guest LPCR depends on hardware type, and future changes will add
restrictions based on errata and guest MMU mode. Move this logic
to a common function and use it for the cases where the guest
wants to update its LPCR (or the LPCR of a nested guest).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/kvm_book3s.h | 2 +
arch/powerpc/kvm/book3s_hv.c | 60 ++++++++++++++++++---------
arch/powerpc/kvm/book3s_hv_nested.c | 3 +-
3 files changed, 45 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 2f5f919f6cd3..3eec3ef6f083 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -258,6 +258,8 @@ extern long kvmppc_hv_get_dirty_log_hpt(struct kvm *kvm,
extern void kvmppc_harvest_vpa_dirty(struct kvmppc_vpa *vpa,
struct kvm_memory_slot *memslot,
unsigned long *map);
+extern unsigned long kvmppc_filter_lpcr_hv(struct kvmppc_vcore *vc,
+ unsigned long lpcr);
extern void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr,
unsigned long mask);
extern void kvmppc_set_fscr(struct kvm_vcpu *vcpu, u64 fscr);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 13bad6bf4c95..c4539c38c639 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1635,6 +1635,27 @@ static int kvm_arch_vcpu_ioctl_set_sregs_hv(struct kvm_vcpu *vcpu,
return 0;
}
+/*
+ * Enforce limits on guest LPCR values based on hardware availability,
+ * guest configuration, and possibly hypervisor support and security
+ * concerns.
+ */
+unsigned long kvmppc_filter_lpcr_hv(struct kvmppc_vcore *vc, unsigned long lpcr)
+{
+ /* On POWER8 and above, userspace can modify AIL */
+ if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+ lpcr &= ~LPCR_AIL;
+
+ /*
+ * On POWER9, allow userspace to enable large decrementer for the
+ * guest, whether or not the host has it enabled.
+ */
+ if (!cpu_has_feature(CPU_FTR_ARCH_300))
+ lpcr &= ~LPCR_LD;
+
+ return lpcr;
+}
+
static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
bool preserve_top32)
{
@@ -1643,6 +1664,23 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
u64 mask;
spin_lock(&vc->lock);
+
+ /*
+ * Userspace can only modify
+ * DPFD (default prefetch depth), ILE (interrupt little-endian),
+ * TC (translation control), AIL (alternate interrupt location),
+ * LD (large decrementer).
+ * These are subject to restrictions from kvmppc_filter_lcpr_hv().
+ */
+ mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD;
+
+ /* Broken 32-bit version of LPCR must not clear top bits */
+ if (preserve_top32)
+ mask &= 0xFFFFFFFF;
+
+ new_lpcr = kvmppc_filter_lpcr_hv(vc,
+ (vc->lpcr & ~mask) | (new_lpcr & mask));
+
/*
* If ILE (interrupt little-endian) has changed, update the
* MSR_LE bit in the intr_msr for each vcpu in this vcore.
@@ -1661,25 +1699,8 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
}
}
- /*
- * Userspace can only modify DPFD (default prefetch depth),
- * ILE (interrupt little-endian) and TC (translation control).
- * On POWER8 and POWER9 userspace can also modify AIL (alt. interrupt loc.).
- */
- mask = LPCR_DPFD | LPCR_ILE | LPCR_TC;
- if (cpu_has_feature(CPU_FTR_ARCH_207S))
- mask |= LPCR_AIL;
- /*
- * On POWER9, allow userspace to enable large decrementer for the
- * guest, whether or not the host has it enabled.
- */
- if (cpu_has_feature(CPU_FTR_ARCH_300))
- mask |= LPCR_LD;
+ vc->lpcr = new_lpcr;
- /* Broken 32-bit version of LPCR must not clear top bits */
- if (preserve_top32)
- mask &= 0xFFFFFFFF;
- vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
spin_unlock(&vc->lock);
}
@@ -4641,8 +4662,9 @@ void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr, unsigned long mask)
struct kvmppc_vcore *vc = kvm->arch.vcores[i];
if (!vc)
continue;
+
spin_lock(&vc->lock);
- vc->lpcr = (vc->lpcr & ~mask) | lpcr;
+ vc->lpcr = kvmppc_filter_lpcr_hv(vc, (vc->lpcr & ~mask) | lpcr);
spin_unlock(&vc->lock);
if (++cores_done >= kvm->arch.online_vcores)
break;
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 2fe1fea4c934..f7b441b3eb17 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -142,7 +142,8 @@ static void sanitise_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr)
*/
mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD |
LPCR_LPES | LPCR_MER;
- hr->lpcr = (vc->lpcr & ~mask) | (hr->lpcr & mask);
+ hr->lpcr = kvmppc_filter_lpcr_hv(vc,
+ (vc->lpcr & ~mask) | (hr->lpcr & mask));
/*
* Don't let L1 enable features for L2 which we've disabled for L1,
--
2.23.0
^ permalink raw reply related
* [PATCH v4 01/46] KVM: PPC: Book3S HV: Nested move LPCR sanitising to sanitise_hv_regs
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
In-Reply-To: <20210323010305.1045293-1-npiggin@gmail.com>
This will get a bit more complicated in future patches. Move it
into the helper function.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kvm/book3s_hv_nested.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 0cd0e7aad588..2fe1fea4c934 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -134,6 +134,16 @@ static void save_hv_return_state(struct kvm_vcpu *vcpu, int trap,
static void sanitise_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr)
{
+ struct kvmppc_vcore *vc = vcpu->arch.vcore;
+ u64 mask;
+
+ /*
+ * Don't let L1 change LPCR bits for the L2 except these:
+ */
+ mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD |
+ LPCR_LPES | LPCR_MER;
+ hr->lpcr = (vc->lpcr & ~mask) | (hr->lpcr & mask);
+
/*
* Don't let L1 enable features for L2 which we've disabled for L1,
* but preserve the interrupt cause field.
@@ -271,8 +281,6 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
u64 hv_ptr, regs_ptr;
u64 hdec_exp;
s64 delta_purr, delta_spurr, delta_ic, delta_vtb;
- u64 mask;
- unsigned long lpcr;
if (vcpu->kvm->arch.l1_ptcr == 0)
return H_NOT_AVAILABLE;
@@ -321,9 +329,7 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
vcpu->arch.nested_vcpu_id = l2_hv.vcpu_token;
vcpu->arch.regs = l2_regs;
vcpu->arch.shregs.msr = vcpu->arch.regs.msr;
- mask = LPCR_DPFD | LPCR_ILE | LPCR_TC | LPCR_AIL | LPCR_LD |
- LPCR_LPES | LPCR_MER;
- lpcr = (vc->lpcr & ~mask) | (l2_hv.lpcr & mask);
+
sanitise_hv_regs(vcpu, &l2_hv);
restore_hv_regs(vcpu, &l2_hv);
@@ -335,7 +341,7 @@ long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
r = RESUME_HOST;
break;
}
- r = kvmhv_run_single_vcpu(vcpu, hdec_exp, lpcr);
+ r = kvmhv_run_single_vcpu(vcpu, hdec_exp, l2_hv.lpcr);
} while (is_kvmppc_resume_guest(r));
/* save L2 state for return */
--
2.23.0
^ permalink raw reply related
* [PATCH v4 00/46] KVM: PPC: Book3S: C-ify the P9 entry/exit code
From: Nicholas Piggin @ 2021-03-23 1:02 UTC (permalink / raw)
To: kvm-ppc; +Cc: linuxppc-dev, Nicholas Piggin
I think enough changes and fixes have gone in since last round
to repost.
I put a git tree here to make things easier to get.
https://github.com/npiggin/linux/tree/kvm-in-c-2
Main changes since v3:
- Hopefully fixed LPCR sanising [from Fabiano review]
- Added MSR[HV] clearing of guest MSR (like MSR[ME] setting).
- Restored a lost comment about PPR saving, improved comments a bit
[Daniel review]
- Added isyncs, removed XXX isync comment.
- Fixed cede comment [Fabiano]
- In stop handling real mode handlers patch, fixed problem of nested
hcall handler calling cede and xics hcalls and consuming them
[Fabiano]
- Filter xics hcalls from being consumed if !kvmppc_xics_enabled
[Fabiano, Alexey noticed and Cedric provided the right recipe and
comment]
- Removed some more of radix, nested, and virt mode paths from the
P7/8 code [noticed by Alexey].
- Rebased on 5.12-rc4
- Hopefully I responded to all reviews and collected all reviewed-bys.
Thanks,
Nick
Nicholas Piggin (46):
KVM: PPC: Book3S HV: Nested move LPCR sanitising to sanitise_hv_regs
KVM: PPC: Book3S HV: Add a function to filter guest LPCR bits
KVM: PPC: Book3S HV: Disallow LPCR[AIL] to be set to 1 or 2
KVM: PPC: Book3S HV: Prevent radix guests from setting LPCR[TC]
KVM: PPC: Book3S HV: Remove redundant mtspr PSPB
KVM: PPC: Book3S HV: remove unused kvmppc_h_protect argument
KVM: PPC: Book3S HV: Fix CONFIG_SPAPR_TCE_IOMMU=n default hcalls
powerpc/64s: Remove KVM handler support from CBE_RAS interrupts
powerpc/64s: remove KVM SKIP test from instruction breakpoint handler
KVM: PPC: Book3S HV: Ensure MSR[ME] is always set in guest MSR
KVM: PPC: Book3S HV: Ensure MSR[HV] is always clear in guest MSR
KVM: PPC: Book3S 64: move KVM interrupt entry to a common entry point
KVM: PPC: Book3S 64: Move GUEST_MODE_SKIP test into KVM
KVM: PPC: Book3S 64: add hcall interrupt handler
KVM: PPC: Book3S 64: Move hcall early register setup to KVM
KVM: PPC: Book3S 64: Move interrupt early register setup to KVM
KVM: PPC: Book3S 64: move bad_host_intr check to HV handler
KVM: PPC: Book3S 64: Minimise hcall handler calling convention
differences
KVM: PPC: Book3S HV P9: Move radix MMU switching instructions together
KVM: PPC: Book3S HV P9: implement kvmppc_xive_pull_vcpu in C
KVM: PPC: Book3S HV P9: Move xive vcpu context management into
kvmhv_p9_guest_entry
KVM: PPC: Book3S HV P9: Stop handling hcalls in real-mode in the P9
path
KVM: PPC: Book3S HV P9: Move setting HDEC after switching to guest
LPCR
KVM: PPC: Book3S HV P9: Use large decrementer for HDEC
KVM: PPC: Book3S HV P9: Use host timer accounting to avoid decrementer
read
KVM: PPC: Book3S HV P9: Reduce mftb per guest entry/exit
powerpc: add set_dec_or_work API for safely updating decrementer
KVM: PPC: Book3S HV P9: Reduce irq_work vs guest decrementer races
KVM: PPC: Book3S HV P9: Implement the rest of the P9 path in C
KVM: PPC: Book3S HV P9: inline kvmhv_load_hv_regs_and_go into
__kvmhv_vcpu_entry_p9
KVM: PPC: Book3S HV P9: Read machine check registers while MSR[RI] is
0
KVM: PPC: Book3S HV P9: Improve exit timing accounting coverage
KVM: PPC: Book3S HV P9: Move SPR loading after expiry time check
KVM: PPC: Book3S HV P9: Add helpers for OS SPR handling
KVM: PPC: Book3S HV P9: Switch to guest MMU context as late as
possible
KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling
MMU
KVM: PPC: Book3S HV: Remove support for dependent threads mode on P9
KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path
KVM: PPC: Book3S HV: Remove virt mode checks from real mode handlers
KVM: PPC: Book3S HV: Remove unused nested HV tests in XICS emulation
KVM: PPC: Book3S HV P9: Allow all P9 processors to enable nested HV
KVM: PPC: Book3S HV: small pseries_do_hcall cleanup
KVM: PPC: Book3S HV: add virtual mode handlers for HPT hcalls and page
faults
KVM: PPC: Book3S HV P9: implement hash guest support
KVM: PPC: Book3S HV P9: implement hash host / hash guest support
KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path
arch/powerpc/include/asm/asm-prototypes.h | 3 +-
arch/powerpc/include/asm/exception-64s.h | 13 +
arch/powerpc/include/asm/kvm_asm.h | 3 +-
arch/powerpc/include/asm/kvm_book3s.h | 2 +
arch/powerpc/include/asm/kvm_book3s_64.h | 8 +
arch/powerpc/include/asm/kvm_host.h | 1 -
arch/powerpc/include/asm/kvm_ppc.h | 20 +-
arch/powerpc/include/asm/mmu_context.h | 6 -
arch/powerpc/include/asm/time.h | 16 +
arch/powerpc/kernel/exceptions-64s.S | 257 ++------
arch/powerpc/kernel/security.c | 5 +-
arch/powerpc/kernel/time.c | 21 +-
arch/powerpc/kvm/Makefile | 6 +
arch/powerpc/kvm/book3s.c | 11 +-
arch/powerpc/kvm/book3s_64_entry.S | 394 ++++++++++++
arch/powerpc/kvm/book3s_64_vio_hv.c | 12 -
arch/powerpc/kvm/book3s_hv.c | 730 ++++++++++++----------
arch/powerpc/kvm/book3s_hv_builtin.c | 138 +---
arch/powerpc/kvm/book3s_hv_interrupt.c | 528 ++++++++++++++++
arch/powerpc/kvm/book3s_hv_interrupts.S | 9 +-
arch/powerpc/kvm/book3s_hv_nested.c | 22 +-
arch/powerpc/kvm/book3s_hv_ras.c | 2 +
arch/powerpc/kvm/book3s_hv_rm_mmu.c | 15 +-
arch/powerpc/kvm/book3s_hv_rm_xics.c | 15 -
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 641 +------------------
arch/powerpc/kvm/book3s_segment.S | 7 +
arch/powerpc/kvm/book3s_xive.c | 119 +++-
arch/powerpc/kvm/book3s_xive.h | 7 -
arch/powerpc/kvm/book3s_xive_native.c | 10 -
arch/powerpc/mm/book3s64/radix_pgtable.c | 27 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 46 --
arch/powerpc/mm/mmu_context.c | 4 +-
arch/powerpc/platforms/powernv/idle.c | 52 +-
33 files changed, 1632 insertions(+), 1518 deletions(-)
create mode 100644 arch/powerpc/kvm/book3s_64_entry.S
create mode 100644 arch/powerpc/kvm/book3s_hv_interrupt.c
--
2.23.0
^ permalink raw reply
* Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
From: Cye Borg @ 2021-03-22 17:10 UTC (permalink / raw)
To: Russell King - ARM Linux admin
Cc: Jens Axboe, Thomas Bogendoerfer, linux-doc, linux-alpha,
linux-kernel, Christoph Hellwig, linux-ide, linux-m68k,
Geert Uytterhoeven, John Paul Adrian Glaubitz, Ivan Kokshaysky,
Matt Turner, linux-mips, linuxppc-dev, David S. Miller,
linux-arm-kernel, Richard Henderson
In-Reply-To: <20210322170338.GZ1463@shell.armlinux.org.uk>
PWS 500au:
snow / # lspci -vvx -s 7.1
00:07.1 IDE interface: Contaq Microsystems 82c693 (prog-if 80 [ISA
Compatibility mode-only controller, supports bus mastering])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 4: I/O ports at 9080 [size=16]
Kernel driver in use: pata_cypress
Kernel modules: pata_cypress
00: 80 10 93 c6 45 00 80 02 00 80 01 01 00 00 80 00
10: f1 01 00 00 f5 03 00 00 00 00 00 00 00 00 00 00
20: 81 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
snow / # lspci -vvx -s 7.2
00:07.2 IDE interface: Contaq Microsystems 82c693 (prog-if 00 [ISA
Compatibility mode-only controller])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 0
Region 0: I/O ports at 0170 [size=8]
Region 1: I/O ports at 0374
Region 4: Memory at 0c240000 (32-bit, non-prefetchable)
[disabled] [size=64K]
Kernel modules: pata_cypress
00: 80 10 93 c6 45 00 80 02 00 00 01 01 00 00 80 00
10: 71 01 00 00 75 03 00 00 00 00 00 00 00 00 00 00
20: 00 00 24 0c 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
On Mon, Mar 22, 2021 at 6:04 PM Russell King - ARM Linux admin
<linux@armlinux.org.uk> wrote:
>
> On Mon, Mar 22, 2021 at 05:09:13PM +0100, John Paul Adrian Glaubitz wrote:
> > On 3/22/21 4:15 PM, Russell King - ARM Linux admin wrote:
> > > I'm quite surprised that the CY82C693 even works on Alpha - I've
> > > asked for a lspci for that last week but nothing has yet been
> > > forthcoming from whoever responded to your patch for Alpha - so I
> > > can't compare what I'm seeing with what's happening with Alpha.
> >
> > Here is lspci on my DEC Alpha XP-1000:
> >
> > root@tsunami:~> lspci
> > 0000:00:07.0 ISA bridge: Contaq Microsystems 82c693
> > 0000:00:07.1 IDE interface: Contaq Microsystems 82c693
> > 0000:00:07.2 IDE interface: Contaq Microsystems 82c693
> > 0000:00:07.3 USB controller: Contaq Microsystems 82c693
> > 0000:00:0d.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
> > 0001:01:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
> > 0001:01:06.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 06)
> > 0001:01:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
> > 0001:02:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
> > root@tsunami:~>
>
> This is no good. What I asked last Thursday was:
>
> "Could you send me the output of lspci -vvx -s 7.1 and lspci -vvx -s 7.2
> please?"
>
> so I can see the resources the kernel is using and a dump of the PCI
> config space to see what the hardware is using.
>
> Thanks.
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply
* Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
From: Cye Borg @ 2021-03-22 16:47 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Jens Axboe, Thomas Bogendoerfer, linux-doc,
Russell King - ARM Linux admin, Christoph Hellwig, linux-ide,
linux-m68k, Geert Uytterhoeven, linux-arm-kernel, linux-alpha,
Ivan Kokshaysky, Matt Turner, linux-mips, linuxppc-dev,
David S. Miller, linux-kernel, Richard Henderson
In-Reply-To: <224b110e-7c42-4e19-800e-e0fa23d3bf7f@physik.fu-berlin.de>
I use pata_cypress on Alpha, and for the above mentioned problems,
it always restricted me to use only one IDE channel out of the two
available. Also, not forcing it to use PIO mode, it always failed to
operate. I would love to test on Alpha, and give you feedback about
a fix/finished implementation of the driver. I have both Alpha Server DS20E
and Alpha Personal Workstation 500 including that freak chipset.
Let me know if/when I can help with my limited capabilities.
btw, here is the lspci of the Compaq PWS 500au:
snow / # lspci
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 30)
00:07.0 ISA bridge: Contaq Microsystems 82c693
00:07.1 IDE interface: Contaq Microsystems 82c693
00:07.2 IDE interface: Contaq Microsystems 82c693
00:07.3 USB controller: Contaq Microsystems 82c693
00:0b.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2 (rev 02)
00:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 01)
00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02)
01:04.0 VGA compatible controller: Cirrus Logic GD 5430/40 [Alpine] (rev 47)
01:05.0 Display controller: Intergraph Corporation Device 00eb (rev 40)
02:04.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05)
02:0a.0 SCSI storage controller: Broadcom / LSI 53c810 (rev 01)
Thanks, best regards,
Barnabas Viragh
On Mon, Mar 22, 2021 at 5:10 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> On 3/22/21 4:15 PM, Russell King - ARM Linux admin wrote:
> > I'm quite surprised that the CY82C693 even works on Alpha - I've
> > asked for a lspci for that last week but nothing has yet been
> > forthcoming from whoever responded to your patch for Alpha - so I
> > can't compare what I'm seeing with what's happening with Alpha.
>
> Here is lspci on my DEC Alpha XP-1000:
>
> root@tsunami:~> lspci
> 0000:00:07.0 ISA bridge: Contaq Microsystems 82c693
> 0000:00:07.1 IDE interface: Contaq Microsystems 82c693
> 0000:00:07.2 IDE interface: Contaq Microsystems 82c693
> 0000:00:07.3 USB controller: Contaq Microsystems 82c693
> 0000:00:0d.0 VGA compatible controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
> 0001:01:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
> 0001:01:06.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 06)
> 0001:01:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
> 0001:02:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
> root@tsunami:~>
>
> It's using pata_cypress:
>
> root@tsunami:~> lsmod|grep cypress
> pata_cypress 3595 3
> libata 235071 2 ata_generic,pata_cypress
> root@tsunami:~
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer - glaubitz@debian.org
> `. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
>
^ permalink raw reply
* Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
From: Cye Borg @ 2021-03-22 16:43 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: Jens Axboe, Thomas Bogendoerfer, linux-doc,
Russell King - ARM Linux admin, Christoph Hellwig, linux-ide,
linux-m68k, Geert Uytterhoeven, linux-arm-kernel, linux-alpha,
Ivan Kokshaysky, Matt Turner, linux-mips, linuxppc-dev,
David S. Miller, linux-kernel, Richard Henderson
In-Reply-To: <224b110e-7c42-4e19-800e-e0fa23d3bf7f@physik.fu-berlin.de>
[-- Attachment #1: Type: text/plain, Size: 2513 bytes --]
And lspci from Compaq PWS 500au:
snow / # lspci
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 30)
00:07.0 ISA bridge: Contaq Microsystems 82c693
00:07.1 IDE interface: Contaq Microsystems 82c693
00:07.2 IDE interface: Contaq Microsystems 82c693
00:07.3 USB controller: Contaq Microsystems 82c693
00:0b.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2 (rev
02)
00:0c.0 PCI bridge: Digital Equipment Corporation DECchip 21052 (rev 01)
00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02)
01:04.0 VGA compatible controller: Cirrus Logic GD 5430/40 [Alpine] (rev 47)
01:05.0 Display controller: Intergraph Corporation Device 00eb (rev 40)
02:04.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev
05)
02:0a.0 SCSI storage controller: Broadcom / LSI 53c810 (rev 01)
It's also using pata_cypress.
Barnabas Viragh
On Mon, Mar 22, 2021 at 5:10 PM John Paul Adrian Glaubitz <
glaubitz@physik.fu-berlin.de> wrote:
> On 3/22/21 4:15 PM, Russell King - ARM Linux admin wrote:
> > I'm quite surprised that the CY82C693 even works on Alpha - I've
> > asked for a lspci for that last week but nothing has yet been
> > forthcoming from whoever responded to your patch for Alpha - so I
> > can't compare what I'm seeing with what's happening with Alpha.
>
> Here is lspci on my DEC Alpha XP-1000:
>
> root@tsunami:~> lspci
> 0000:00:07.0 ISA bridge: Contaq Microsystems 82c693
> 0000:00:07.1 IDE interface: Contaq Microsystems 82c693
> 0000:00:07.2 IDE interface: Contaq Microsystems 82c693
> 0000:00:07.3 USB controller: Contaq Microsystems 82c693
> 0000:00:0d.0 VGA compatible controller: Texas Instruments TVP4020
> [Permedia 2] (rev 01)
> 0001:01:03.0 Ethernet controller: Digital Equipment Corporation DECchip
> 21142/43 (rev 41)
> 0001:01:06.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI
> (rev 06)
> 0001:01:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev
> 03)
> 0001:02:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit
> Ethernet Controller (rev 05)
> root@tsunami:~>
>
> It's using pata_cypress:
>
> root@tsunami:~> lsmod|grep cypress
> pata_cypress 3595 3
> libata 235071 2 ata_generic,pata_cypress
> root@tsunami:~
>
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer - glaubitz@debian.org
> `. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
>
>
[-- Attachment #2: Type: text/html, Size: 3223 bytes --]
^ permalink raw reply
* Re: [PATCH 02/10] ARM: disable CONFIG_IDE in footbridge_defconfig
From: Cye Borg @ 2021-03-22 15:44 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Jens Axboe, Thomas Bogendoerfer, linux-doc,
Russell King - ARM Linux admin, linux-kernel, linux-ide,
linux-m68k, Ivan Kokshaysky, linux-alpha, Geert Uytterhoeven,
Matt Turner, linux-mips, linuxppc-dev, David S. Miller,
linux-arm-kernel, Richard Henderson
In-Reply-To: <20210322151823.GA2764@lst.de>
[-- Attachment #1: Type: text/plain, Size: 1717 bytes --]
I use pata_cypress on Alpha, and for the above mentioned problems,
it always restricted me to use only one IDE channel out of the two
available. Also, not forcing it to use PIO mode, it always failed to
operate. I would love to test on Alpha, and give you feedback about
a fix/finished implementation of the driver. I have both Alpha Server DS20E
and Alpha Personal Workstation 500 including that freak chipset.
Let me know if/when I can help with my limited capabilities.
Thanks, best regards,
Barnabas Viragh
On Mon, Mar 22, 2021 at 4:19 PM Christoph Hellwig <hch@lst.de> wrote:
> On Mon, Mar 22, 2021 at 03:15:03PM +0000, Russell King - ARM Linux admin
> wrote:
> > It gets worse than that though - due to a change to remove
> > pcibios_min_io from the generic code, moving it into the ARM
> > architecture code, this has caused a regression that prevents the
> > legacy resources being registered against the bus resource. So even
> > if they are there, they cause probe failures. I haven't found a
> > reasonable way to solve this yet, but until there is, there is no
> > way that the PATA driver can be used as the "legacy mode" support
> > is effectively done via the PCI code assigning virtual IO port
> > resources.
> >
> > I'm quite surprised that the CY82C693 even works on Alpha - I've
> > asked for a lspci for that last week but nothing has yet been
> > forthcoming from whoever responded to your patch for Alpha - so I
> > can't compare what I'm seeing with what's happening with Alpha.
>
> That sounds like something we could fix with a quirk for function 2
> in the PCI resource assignment code. Can you show what vendor and
> device ID function 2 has so that I could try to come up with one?
>
[-- Attachment #2: Type: text/html, Size: 2247 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox