* Re: [PATCH v2 4/8] powerpc/ppc-opcode: introduce PPC_RAW_BRANCH() macro
From: LEROY Christophe @ 2021-09-17 16:14 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao@linux.ibm.com, mpe@ellerman.id.au,
ast@kernel.org, daniel@iogearbox.net
Cc: songliubraving@fb.com, netdev@vger.kernel.org,
john.fastabend@gmail.com, andrii@kernel.org, kpsingh@kernel.org,
paulus@samba.org, yhs@fb.com, bpf@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, kafai@fb.com
In-Reply-To: <20210917153047.177141-5-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> Define and use PPC_RAW_BRANCH() macro instead of open coding it. This
> macro is used while adding BPF_PROBE_MEM support.
>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
>
> Changes in v2:
> * New patch to introduce PPC_RAW_BRANCH() macro.
>
>
> arch/powerpc/include/asm/ppc-opcode.h | 2 ++
> arch/powerpc/net/bpf_jit.h | 4 ++--
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
> index baea657bc868..f50213e2a3e0 100644
> --- a/arch/powerpc/include/asm/ppc-opcode.h
> +++ b/arch/powerpc/include/asm/ppc-opcode.h
> @@ -566,6 +566,8 @@
> #define PPC_RAW_MTSPR(spr, d) (0x7c0003a6 | ___PPC_RS(d) | __PPC_SPR(spr))
> #define PPC_RAW_EIEIO() (0x7c0006ac)
>
> +#define PPC_RAW_BRANCH(addr) (PPC_INST_BRANCH | ((addr) & 0x03fffffc))
> +
> /* Deal with instructions that older assemblers aren't aware of */
> #define PPC_BCCTR_FLUSH stringify_in_c(.long PPC_INST_BCCTR_FLUSH)
> #define PPC_CP_ABORT stringify_in_c(.long PPC_RAW_CP_ABORT)
> diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
> index 411c63d945c7..0c8f885b8f48 100644
> --- a/arch/powerpc/net/bpf_jit.h
> +++ b/arch/powerpc/net/bpf_jit.h
> @@ -24,8 +24,8 @@
> #define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
>
> /* Long jump; (unconditional 'branch') */
> -#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
> - (((dest) - (ctx->idx * 4)) & 0x03fffffc))
> +#define PPC_JMP(dest) EMIT(PPC_RAW_BRANCH((dest) - (ctx->idx * 4)))
> +
> /* blr; (unconditional 'branch' with link) to absolute address */
> #define PPC_BL_ABS(dest) EMIT(PPC_INST_BL | \
> (((dest) - (unsigned long)(image + ctx->idx)) & 0x03fffffc))
>
^ permalink raw reply
* Re: [PATCH v2 5/8] bpf ppc64: Add BPF_PROBE_MEM support for JIT
From: Christophe Leroy @ 2021-09-17 16:20 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao, mpe, ast, daniel
Cc: Ravi Bangoria, songliubraving, netdev, john.fastabend, andrii,
kpsingh, paulus, yhs, bpf, linuxppc-dev, kafai
In-Reply-To: <20210917153047.177141-6-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
>
> BPF load instruction with BPF_PROBE_MEM mode can cause a fault
> inside kernel. Append exception table for such instructions
> within BPF program.
>
> Unlike other archs which uses extable 'fixup' field to pass dest_reg
> and nip, BPF exception table on PowerPC follows the generic PowerPC
> exception table design, where it populates both fixup and extable
> sections within BPF program. fixup section contains two instructions,
> first instruction clears dest_reg and 2nd jumps to next instruction
> in the BPF code. extable 'insn' field contains relative offset of
> the instruction and 'fixup' field contains relative offset of the
> fixup entry. Example layout of BPF program with extable present:
>
> +------------------+
> | |
> | |
> 0x4020 -->| ld r27,4(r3) |
> | |
> | |
> 0x40ac -->| lwz r3,0(r4) |
> | |
> | |
> |------------------|
> 0x4280 -->| li r27,0 | \ fixup entry
> | b 0x4024 | /
> 0x4288 -->| li r3,0 |
> | b 0x40b0 |
> |------------------|
> 0x4290 -->| insn=0xfffffd90 | \ extable entry
> | fixup=0xffffffec | /
> 0x4298 -->| insn=0xfffffe14 |
> | fixup=0xffffffec |
> +------------------+
>
> (Addresses shown here are chosen random, not real)
>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> ---
>
> Changes in v2:
> * Used JITing code after refactoring.
> * Replaced 'xor reg,reg,reg' with 'li reg,0' where appropriate.
> * Avoided unnecessary init during declaration.
>
>
> arch/powerpc/net/bpf_jit.h | 5 ++-
> arch/powerpc/net/bpf_jit_comp.c | 25 ++++++++++----
> arch/powerpc/net/bpf_jit_comp32.c | 2 +-
> arch/powerpc/net/bpf_jit_comp64.c | 57 ++++++++++++++++++++++++++++++-
> 4 files changed, 80 insertions(+), 9 deletions(-)
>
> diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
> index 0c8f885b8f48..6357c71c26eb 100644
> --- a/arch/powerpc/net/bpf_jit.h
> +++ b/arch/powerpc/net/bpf_jit.h
> @@ -141,8 +141,11 @@ struct codegen_context {
> unsigned int idx;
> unsigned int stack_size;
> int b2p[ARRAY_SIZE(b2p)];
> + unsigned int exentry_idx;
> };
>
> +#define BPF_FIXUP_LEN 8 /* Two instructions */
> +
> static inline void bpf_flush_icache(void *start, void *end)
> {
> smp_wmb(); /* smp write barrier */
> @@ -166,7 +169,7 @@ static inline void bpf_clear_seen_register(struct codegen_context *ctx, int i)
>
> void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx, u64 func);
> int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
> - u32 *addrs);
> + u32 *addrs, int pass);
> void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx);
> void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx);
> void bpf_jit_realloc_regs(struct codegen_context *ctx);
> diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
> index c5c9e8ad1de7..e92bd79d3bac 100644
> --- a/arch/powerpc/net/bpf_jit_comp.c
> +++ b/arch/powerpc/net/bpf_jit_comp.c
> @@ -101,6 +101,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> struct bpf_prog *tmp_fp;
> bool bpf_blinded = false;
> bool extra_pass = false;
> + u32 extable_len;
> + u32 fixup_len;
>
> if (!fp->jit_requested)
> return org_fp;
> @@ -131,7 +133,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> image = jit_data->image;
> bpf_hdr = jit_data->header;
> proglen = jit_data->proglen;
> - alloclen = proglen + FUNCTION_DESCR_SIZE;
> extra_pass = true;
> goto skip_init_ctx;
> }
> @@ -149,7 +150,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
>
> /* Scouting faux-generate pass 0 */
> - if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
> + if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
> /* We hit something illegal or unsupported. */
> fp = org_fp;
> goto out_addrs;
> @@ -162,7 +163,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> */
> if (cgctx.seen & SEEN_TAILCALL) {
> cgctx.idx = 0;
> - if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
> + if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
> fp = org_fp;
> goto out_addrs;
> }
> @@ -177,8 +178,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> bpf_jit_build_prologue(0, &cgctx);
> bpf_jit_build_epilogue(0, &cgctx);
>
> + fixup_len = fp->aux->num_exentries * BPF_FIXUP_LEN;
> + extable_len = fp->aux->num_exentries * sizeof(struct exception_table_entry);
> +
> proglen = cgctx.idx * 4;
> - alloclen = proglen + FUNCTION_DESCR_SIZE;
> + alloclen = proglen + FUNCTION_DESCR_SIZE + fixup_len + extable_len;
>
> bpf_hdr = bpf_jit_binary_alloc(alloclen, &image, 4, bpf_jit_fill_ill_insns);
> if (!bpf_hdr) {
> @@ -186,6 +190,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> goto out_addrs;
> }
>
> + if (extable_len) {
> + fp->aux->extable = (void *)image + FUNCTION_DESCR_SIZE +
> + proglen + fixup_len;
> + }
No { } for single lines statements (See kernel coding style)
> +
> skip_init_ctx:
> code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
>
> @@ -210,7 +219,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
> /* Now build the prologue, body code & epilogue for real. */
> cgctx.idx = 0;
> bpf_jit_build_prologue(code_base, &cgctx);
> - bpf_jit_build_body(fp, code_base, &cgctx, addrs);
> + if (bpf_jit_build_body(fp, code_base, &cgctx, addrs, pass)) {
> + bpf_jit_binary_free(bpf_hdr);
> + fp = org_fp;
> + goto out_addrs;
> + }
> bpf_jit_build_epilogue(code_base, &cgctx);
>
> if (bpf_jit_enable > 1)
> @@ -234,7 +247,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>
> fp->bpf_func = (void *)image;
> fp->jited = 1;
> - fp->jited_len = alloclen;
> + fp->jited_len = proglen + FUNCTION_DESCR_SIZE;
>
> bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
> bpf_jit_binary_lock_ro(bpf_hdr);
> diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
> index c8ae14c316e3..94641b7be387 100644
> --- a/arch/powerpc/net/bpf_jit_comp32.c
> +++ b/arch/powerpc/net/bpf_jit_comp32.c
> @@ -266,7 +266,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
>
> /* Assemble the body code between the prologue & epilogue */
> int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
> - u32 *addrs)
> + u32 *addrs, int pass)
> {
> const struct bpf_insn *insn = fp->insnsi;
> int flen = fp->len;
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index 78b28f25555c..2fc10995f243 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -270,9 +270,54 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
> /* out: */
> }
>
> +/*
> + * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling
> + * this function, as this only applies to BPF_PROBE_MEM, for now.
> + */
> +static int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass,
> + struct codegen_context *ctx, int dst_reg)
Patch 7 will reuse this function so put it in
arch/powerpc/net/bpf_jit_comp.c now instead of moving it later.
> +{
> + off_t offset;
> + unsigned long pc;
> + struct exception_table_entry *ex;
> + u32 *fixup;
> +
> + /* Populate extable entries only in the last pass */
> + if (pass != 2)
> + return 0;
> +
> + if (!fp->aux->extable ||
> + WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries))
> + return -EINVAL;
> +
> + pc = (unsigned long)&image[ctx->idx - 1];
> +
> + fixup = (void *)fp->aux->extable -
> + (fp->aux->num_exentries * BPF_FIXUP_LEN) +
> + (ctx->exentry_idx * BPF_FIXUP_LEN);
> +
> + fixup[0] = PPC_RAW_LI(dst_reg, 0);
> + fixup[1] = PPC_RAW_BRANCH((long)(pc + 4) - (long)&fixup[1]);
> +
> + ex = &fp->aux->extable[ctx->exentry_idx];
> +
> + offset = pc - (long)&ex->insn;
> + if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> + return -ERANGE;
> + ex->insn = offset;
> +
> + offset = (long)fixup - (long)&ex->fixup;
> + if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> + return -ERANGE;
> + ex->fixup = offset;
> +
> + ctx->exentry_idx++;
> + return 0;
> +}
> +
> /* Assemble the body code between the prologue & epilogue */
> int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
> - u32 *addrs)
> + u32 *addrs, int pass)
> {
> const struct bpf_insn *insn = fp->insnsi;
> int flen = fp->len;
> @@ -714,12 +759,16 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> */
> /* dst = *(u8 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_B:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_B:
> /* dst = *(u16 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_H:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_H:
> /* dst = *(u32 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_W:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_W:
> /* dst = *(u64 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_DW:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
> switch (size) {
> case BPF_B:
> EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> @@ -737,6 +786,12 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
>
> if ((size != BPF_DW) && insn_is_zext(&insn[i + 1]))
> addrs[++i] = ctx->idx * 4;
> +
> + if (BPF_MODE(code) == BPF_PROBE_MEM) {
> + ret = bpf_add_extable_entry(fp, image, pass, ctx, dst_reg);
> + if (ret)
> + return ret;
> + }
> break;
>
> /*
>
^ permalink raw reply
* Re: [PATCH v2 3/8] bpf powerpc: refactor JIT compiler code
From: Christophe Leroy @ 2021-09-17 16:22 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao, mpe, ast, daniel
Cc: songliubraving, netdev, john.fastabend, andrii, kpsingh, paulus,
yhs, bpf, linuxppc-dev, kafai
In-Reply-To: <20210917153047.177141-4-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> Refactor powerpc JITing. This simplifies adding BPF_PROBE_MEM support.
>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> ---
>
> Changes in v2:
> * New patch to refactor a bit of JITing code.
>
>
> arch/powerpc/net/bpf_jit_comp32.c | 50 +++++++++++---------
> arch/powerpc/net/bpf_jit_comp64.c | 76 ++++++++++++++++---------------
> 2 files changed, 68 insertions(+), 58 deletions(-)
>
> diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
> index b60b59426a24..c8ae14c316e3 100644
> --- a/arch/powerpc/net/bpf_jit_comp32.c
> +++ b/arch/powerpc/net/bpf_jit_comp32.c
> @@ -276,17 +276,17 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> u32 exit_addr = addrs[flen];
>
> for (i = 0; i < flen; i++) {
> - u32 code = insn[i].code;
> u32 dst_reg = bpf_to_ppc(ctx, insn[i].dst_reg);
> - u32 dst_reg_h = dst_reg - 1;
> u32 src_reg = bpf_to_ppc(ctx, insn[i].src_reg);
> - u32 src_reg_h = src_reg - 1;
> u32 tmp_reg = bpf_to_ppc(ctx, TMP_REG);
> + u32 true_cond, code = insn[i].code;
> + u32 dst_reg_h = dst_reg - 1;
> + u32 src_reg_h = src_reg - 1;
> + u32 size = BPF_SIZE(code);
> s16 off = insn[i].off;
> s32 imm = insn[i].imm;
> bool func_addr_fixed;
> u64 func_addr;
> - u32 true_cond;
>
> /*
> * addrs[] maps a BPF bytecode address into a real offset from
> @@ -809,25 +809,33 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> /*
> * BPF_LDX
> */
> - case BPF_LDX | BPF_MEM | BPF_B: /* dst = *(u8 *)(ul) (src + off) */
> - EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> - if (!fp->aux->verifier_zext)
> - EMIT(PPC_RAW_LI(dst_reg_h, 0));
> - break;
> - case BPF_LDX | BPF_MEM | BPF_H: /* dst = *(u16 *)(ul) (src + off) */
> - EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
> - if (!fp->aux->verifier_zext)
> - EMIT(PPC_RAW_LI(dst_reg_h, 0));
> - break;
> - case BPF_LDX | BPF_MEM | BPF_W: /* dst = *(u32 *)(ul) (src + off) */
> - EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
> - if (!fp->aux->verifier_zext)
> + /* dst = *(u8 *)(ul) (src + off) */
> + case BPF_LDX | BPF_MEM | BPF_B:
> + /* dst = *(u16 *)(ul) (src + off) */
> + case BPF_LDX | BPF_MEM | BPF_H:
> + /* dst = *(u32 *)(ul) (src + off) */
> + case BPF_LDX | BPF_MEM | BPF_W:
> + /* dst = *(u64 *)(ul) (src + off) */
> + case BPF_LDX | BPF_MEM | BPF_DW:
You have to add the 'fallthrough;' keyword to avoid build failure with
later versions of GCC.
> + switch (size) {
> + case BPF_B:
> + EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> + break;
> + case BPF_H:
> + EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
> + break;
> + case BPF_W:
> + EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
> + break;
> + case BPF_DW:
> + EMIT(PPC_RAW_LWZ(dst_reg_h, src_reg, off));
> + EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off + 4));
> + break;
> + }
> +
> + if ((size != BPF_DW) && !fp->aux->verifier_zext)
> EMIT(PPC_RAW_LI(dst_reg_h, 0));
> break;
> - case BPF_LDX | BPF_MEM | BPF_DW: /* dst = *(u64 *)(ul) (src + off) */
> - EMIT(PPC_RAW_LWZ(dst_reg_h, src_reg, off));
> - EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off + 4));
> - break;
>
> /*
> * Doubleword load
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index 2a87da50d9a4..78b28f25555c 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -282,16 +282,15 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> u32 exit_addr = addrs[flen];
>
> for (i = 0; i < flen; i++) {
> - u32 code = insn[i].code;
> u32 dst_reg = b2p[insn[i].dst_reg];
> u32 src_reg = b2p[insn[i].src_reg];
> + u32 tmp_idx, code = insn[i].code;
> + u32 size = BPF_SIZE(code);
> s16 off = insn[i].off;
> s32 imm = insn[i].imm;
> bool func_addr_fixed;
> - u64 func_addr;
> - u64 imm64;
> + u64 func_addr, imm64;
> u32 true_cond;
> - u32 tmp_idx;
>
> /*
> * addrs[] maps a BPF bytecode address into a real offset from
> @@ -638,35 +637,34 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> */
> case BPF_STX | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = src */
> case BPF_ST | BPF_MEM | BPF_B: /* *(u8 *)(dst + off) = imm */
> - if (BPF_CLASS(code) == BPF_ST) {
> - EMIT(PPC_RAW_LI(b2p[TMP_REG_1], imm));
> - src_reg = b2p[TMP_REG_1];
> - }
> - EMIT(PPC_RAW_STB(src_reg, dst_reg, off));
> - break;
> case BPF_STX | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = src */
> case BPF_ST | BPF_MEM | BPF_H: /* (u16 *)(dst + off) = imm */
> - if (BPF_CLASS(code) == BPF_ST) {
> - EMIT(PPC_RAW_LI(b2p[TMP_REG_1], imm));
> - src_reg = b2p[TMP_REG_1];
> - }
> - EMIT(PPC_RAW_STH(src_reg, dst_reg, off));
> - break;
> case BPF_STX | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = src */
> case BPF_ST | BPF_MEM | BPF_W: /* *(u32 *)(dst + off) = imm */
> - if (BPF_CLASS(code) == BPF_ST) {
> - PPC_LI32(b2p[TMP_REG_1], imm);
> - src_reg = b2p[TMP_REG_1];
> - }
> - EMIT(PPC_RAW_STW(src_reg, dst_reg, off));
> - break;
You have to add the 'fallthrough;' keyword to avoid build failure with
later versions of GCC.
> case BPF_STX | BPF_MEM | BPF_DW: /* (u64 *)(dst + off) = src */
> case BPF_ST | BPF_MEM | BPF_DW: /* *(u64 *)(dst + off) = imm */
> if (BPF_CLASS(code) == BPF_ST) {
> - PPC_LI32(b2p[TMP_REG_1], imm);
> + if ((size == BPF_B) || (size == BPF_H))
> + EMIT(PPC_RAW_LI(b2p[TMP_REG_1], imm));
> + else /* size == BPF_W || size == BPF_DW */
> + PPC_LI32(b2p[TMP_REG_1], imm);
> src_reg = b2p[TMP_REG_1];
> }
> - PPC_BPF_STL(src_reg, dst_reg, off);
> +
> + switch (size) {
> + case BPF_B:
> + EMIT(PPC_RAW_STB(src_reg, dst_reg, off));
> + break;
> + case BPF_H:
> + EMIT(PPC_RAW_STH(src_reg, dst_reg, off));
> + break;
> + case BPF_W:
> + EMIT(PPC_RAW_STW(src_reg, dst_reg, off));
> + break;
> + case BPF_DW:
> + PPC_BPF_STL(src_reg, dst_reg, off);
> + break;
> + }
> break;
>
> /*
> @@ -716,25 +714,29 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> */
> /* dst = *(u8 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_B:
> - EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> - if (insn_is_zext(&insn[i + 1]))
> - addrs[++i] = ctx->idx * 4;
> - break;
> /* dst = *(u16 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_H:
> - EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
> - if (insn_is_zext(&insn[i + 1]))
> - addrs[++i] = ctx->idx * 4;
> - break;
> /* dst = *(u32 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_W:
> - EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
> - if (insn_is_zext(&insn[i + 1]))
> - addrs[++i] = ctx->idx * 4;
> - break;
> /* dst = *(u64 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_DW:
> - PPC_BPF_LL(dst_reg, src_reg, off);
> + switch (size) {
> + case BPF_B:
> + EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> + break;
> + case BPF_H:
> + EMIT(PPC_RAW_LHZ(dst_reg, src_reg, off));
> + break;
> + case BPF_W:
> + EMIT(PPC_RAW_LWZ(dst_reg, src_reg, off));
> + break;
> + case BPF_DW:
> + PPC_BPF_LL(dst_reg, src_reg, off);
> + break;
> + }
> +
> + if ((size != BPF_DW) && insn_is_zext(&insn[i + 1]))
> + addrs[++i] = ctx->idx * 4;
> break;
>
> /*
>
^ permalink raw reply
* Re: [PATCH v2 7/8] bpf ppc32: Add BPF_PROBE_MEM support for JIT
From: Christophe Leroy @ 2021-09-17 16:39 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao, mpe, ast, daniel
Cc: songliubraving, netdev, john.fastabend, andrii, kpsingh, paulus,
yhs, bpf, linuxppc-dev, kafai
In-Reply-To: <20210917153047.177141-8-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> BPF load instruction with BPF_PROBE_MEM mode can cause a fault
> inside kernel. Append exception table for such instructions
> within BPF program.
>
> Unlike other archs which uses extable 'fixup' field to pass dest_reg
> and nip, BPF exception table on PowerPC follows the generic PowerPC
> exception table design, where it populates both fixup and extable
> sections within BPF program. fixup section contains 3 instructions,
> first 2 instructions clear dest_reg (lower & higher 32-bit registers)
> and last instruction jumps to next instruction in the BPF code.
> extable 'insn' field contains relative offset of the instruction and
> 'fixup' field contains relative offset of the fixup entry. Example
> layout of BPF program with extable present:
>
> +------------------+
> | |
> | |
> 0x4020 -->| lwz r28,4(r4) |
> | |
> | |
> 0x40ac -->| lwz r3,0(r24) |
> | lwz r4,4(r24) |
> | |
> | |
> |------------------|
> 0x4278 -->| li r28,0 | \
> | li r27,0 | | fixup entry
> | b 0x4024 | /
> 0x4284 -->| li r4,0 |
> | li r3,0 |
> | b 0x40b4 |
> |------------------|
> 0x4290 -->| insn=0xfffffd90 | \ extable entry
> | fixup=0xffffffe4 | /
> 0x4298 -->| insn=0xfffffe14 |
> | fixup=0xffffffe8 |
> +------------------+
>
> (Addresses shown here are chosen random, not real)
>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> ---
>
> Changes in v2:
> * New patch to add BPF_PROBE_MEM support for PPC32.
>
>
> arch/powerpc/net/bpf_jit.h | 7 +++++
> arch/powerpc/net/bpf_jit_comp.c | 50 +++++++++++++++++++++++++++++++
> arch/powerpc/net/bpf_jit_comp32.c | 30 +++++++++++++++++++
> arch/powerpc/net/bpf_jit_comp64.c | 48 ++---------------------------
> 4 files changed, 89 insertions(+), 46 deletions(-)
>
> diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
> index 6357c71c26eb..6a591ef88006 100644
> --- a/arch/powerpc/net/bpf_jit.h
> +++ b/arch/powerpc/net/bpf_jit.h
> @@ -144,7 +144,11 @@ struct codegen_context {
> unsigned int exentry_idx;
> };
>
> +#ifdef CONFIG_PPC32
> +#define BPF_FIXUP_LEN 12 /* Three instructions */
Could use 3 and 2 instead of 12 and 8, see later why.
> +#else
> #define BPF_FIXUP_LEN 8 /* Two instructions */
> +#endif
>
> static inline void bpf_flush_icache(void *start, void *end)
> {
> @@ -174,6 +178,9 @@ void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx);
> void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx);
> void bpf_jit_realloc_regs(struct codegen_context *ctx);
>
> +int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass, struct codegen_context *ctx,
> + int insn_idx, int jmp_off, int dst_reg);
> +
> #endif
>
> #endif
> diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
> index e92bd79d3bac..a1753b8c78c8 100644
> --- a/arch/powerpc/net/bpf_jit_comp.c
> +++ b/arch/powerpc/net/bpf_jit_comp.c
> @@ -271,3 +271,53 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>
> return fp;
> }
> +
> +/*
> + * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling
> + * this function, as this only applies to BPF_PROBE_MEM, for now.
> + */
> +int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass, struct codegen_context *ctx,
> + int insn_idx, int jmp_off, int dst_reg)
> +{
Modify patch 5 to get that function already in
arch/powerpc/net/bpf_jit_comp.c, so that only changes/additions to the
function appear here.
And you can have the prototype ready for the final version in patch 5
instead of adding new arguments here and having to change ppc64 call site.
And in fact you can use them already in patch 5, like jmp_off.
> + off_t offset;
> + unsigned long pc;
> + struct exception_table_entry *ex;
> + u32 *fixup;
> +
> + /* Populate extable entries only in the last pass */
> + if (pass != 2)
> + return 0;
> +
> + if (!fp->aux->extable ||
> + WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries))
> + return -EINVAL;
> +
> + pc = (unsigned long)&image[insn_idx];
> +
> + fixup = (void *)fp->aux->extable -
> + (fp->aux->num_exentries * BPF_FIXUP_LEN) +
> + (ctx->exentry_idx * BPF_FIXUP_LEN);
Use 2 or 3 for BPF_FIXUP_LEN and multiply by 4 here.
> +
> + fixup[0] = PPC_RAW_LI(dst_reg, 0);
> +#ifdef CONFIG_PPC32
You should use 'if (IS_ENABLED(CONFIG_PPC32)' instead of a #ifdef here.
> + fixup[1] = PPC_RAW_LI(dst_reg - 1, 0); /* clear higher 32-bit register too */
> + fixup[2] = PPC_RAW_BRANCH((long)(pc + jmp_off) - (long)&fixup[2]);
> +#else
> + fixup[1] = PPC_RAW_BRANCH((long)(pc + jmp_off) - (long)&fixup[1]);
> +#endif
Use 2 or 3 for BPF_FIXUP_LEN and you can do
if (IS_ENABLED(CONFIG_PPC32)
fixup[1] = PPC_RAW_LI(dst_reg - 1, 0); /* clear higher 32-bit register
too */
fixup[BPF_FIXUP_LEN - 1] = PPC_RAW_BRANCH((long)(pc + jmp_off) -
(long)&fixup[BPF_FIXUP_LEN - 1]);
> +
> + ex = &fp->aux->extable[ctx->exentry_idx];
> +
> + offset = pc - (long)&ex->insn;
> + if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> + return -ERANGE;
> + ex->insn = offset;
> +
> + offset = (long)fixup - (long)&ex->fixup;
> + if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> + return -ERANGE;
> + ex->fixup = offset;
> +
> + ctx->exentry_idx++;
> + return 0;
> +}
> diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
> index 94641b7be387..c6262289dcc4 100644
> --- a/arch/powerpc/net/bpf_jit_comp32.c
> +++ b/arch/powerpc/net/bpf_jit_comp32.c
> @@ -811,12 +811,16 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> */
> /* dst = *(u8 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_B:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_B:
> /* dst = *(u16 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_H:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_H:
> /* dst = *(u32 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_W:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_W:
> /* dst = *(u64 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_DW:
> + case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
> switch (size) {
> case BPF_B:
> EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
> @@ -835,6 +839,32 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
>
> if ((size != BPF_DW) && !fp->aux->verifier_zext)
> EMIT(PPC_RAW_LI(dst_reg_h, 0));
> +
> + if (BPF_MODE(code) == BPF_PROBE_MEM) {
> + int insn_idx = ctx->idx - 1;
> + int jmp_off = 4;
> +
> + /*
> + * In case of BPF_DW, two lwz instructions are emitted, one
> + * for higher 32-bit and another for lower 32-bit. So, set
> + * ex->insn to the first of the two and jump over both
> + * instructions in fixup.
> + *
> + * Similarly, with !verifier_zext, two instructions are
> + * emitted for BPF_B/H/W case. So, set ex-insn to the
> + * instruction that could fault and skip over both
> + * instructions.
> + */
> + if ((size == BPF_DW) || !fp->aux->verifier_zext) {
No need of ( ) around 'size == BPF_DW'
> + insn_idx -= 1;
> + jmp_off += 4;
> + }
> +
> + ret = bpf_add_extable_entry(fp, image, pass, ctx, insn_idx,
> + jmp_off, dst_reg);
> + if (ret)
> + return ret;
> + }
> break;
>
> /*
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index eb28dbc67151..10cc9f04843c 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -270,51 +270,6 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
> /* out: */
> }
>
> -/*
> - * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling
> - * this function, as this only applies to BPF_PROBE_MEM, for now.
> - */
> -static int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass,
> - struct codegen_context *ctx, int dst_reg)
> -{
> - off_t offset;
> - unsigned long pc;
> - struct exception_table_entry *ex;
> - u32 *fixup;
> -
> - /* Populate extable entries only in the last pass */
> - if (pass != 2)
> - return 0;
> -
> - if (!fp->aux->extable ||
> - WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries))
> - return -EINVAL;
> -
> - pc = (unsigned long)&image[ctx->idx - 1];
> -
> - fixup = (void *)fp->aux->extable -
> - (fp->aux->num_exentries * BPF_FIXUP_LEN) +
> - (ctx->exentry_idx * BPF_FIXUP_LEN);
> -
> - fixup[0] = PPC_RAW_LI(dst_reg, 0);
> - fixup[1] = PPC_RAW_BRANCH((long)(pc + 4) - (long)&fixup[1]);
> -
> - ex = &fp->aux->extable[ctx->exentry_idx];
> -
> - offset = pc - (long)&ex->insn;
> - if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> - return -ERANGE;
> - ex->insn = offset;
> -
> - offset = (long)fixup - (long)&ex->fixup;
> - if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
> - return -ERANGE;
> - ex->fixup = offset;
> -
> - ctx->exentry_idx++;
> - return 0;
> -}
> -
> /* Assemble the body code between the prologue & epilogue */
> int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
> u32 *addrs, int pass)
> @@ -811,7 +766,8 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> addrs[++i] = ctx->idx * 4;
>
> if (BPF_MODE(code) == BPF_PROBE_MEM) {
> - ret = bpf_add_extable_entry(fp, image, pass, ctx, dst_reg);
> + ret = bpf_add_extable_entry(fp, image, pass, ctx, ctx->idx - 1,
> + 4, dst_reg);
Make that ready in patch 5 so that you don't need to change here in patch 7.
> if (ret)
> return ret;
> }
>
^ permalink raw reply
* Re: [PATCH v2 6/8] bpf ppc64: Add addr > TASK_SIZE_MAX explicit check
From: Christophe Leroy @ 2021-09-17 16:50 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao, mpe, ast, daniel
Cc: Ravi Bangoria, songliubraving, netdev, john.fastabend, andrii,
kpsingh, paulus, yhs, bpf, linuxppc-dev, kafai
In-Reply-To: <20210917153047.177141-7-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
>
> On PPC64 with KUAP enabled, any kernel code which wants to
> access userspace needs to be surrounded by disable-enable KUAP.
> But that is not happening for BPF_PROBE_MEM load instruction.
> So, when BPF program tries to access invalid userspace address,
> page-fault handler considers it as bad KUAP fault:
>
> Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)
>
> Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
> mode) could either be a valid kernel pointer or NULL but should
> never be a pointer to userspace address, execute BPF_PROBE_MEM load
> only if addr > TASK_SIZE_MAX, otherwise set dst_reg=0 and move on.
You should do like copy_from_kernel_nofault_allowed() and use the same
criterias as is_kernel_addr() instead of using TASK_SIZE_MAX.
>
> This will catch NULL, valid or invalid userspace pointers. Only bad
> kernel pointer will be handled by BPF exception table.
>
> [Alexei suggested for x86]
> Suggested-by: Alexei Starovoitov <ast@kernel.org>
> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> ---
>
> Changes in v2:
> * Refactored the code based on Christophe's comments.
>
>
> arch/powerpc/net/bpf_jit_comp64.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index 2fc10995f243..eb28dbc67151 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -769,6 +769,29 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> /* dst = *(u64 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_DW:
> case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
> + /*
> + * As PTR_TO_BTF_ID that uses BPF_PROBE_MEM mode could either be a valid
> + * kernel pointer or NULL but not a userspace address, execute BPF_PROBE_MEM
> + * load only if addr > TASK_SIZE_MAX, otherwise set dst_reg=0 and move on.
> + */
> + if (BPF_MODE(code) == BPF_PROBE_MEM) {
> + unsigned int adjusted_idx;
> +
> + /*
> + * Check if 'off' is word aligned because PPC_BPF_LL()
> + * (BPF_DW case) generates two instructions if 'off' is not
> + * word-aligned and one instruction otherwise.
> + */
> + adjusted_idx = ((BPF_SIZE(code) == BPF_DW) && (off & 3)) ? 1 : 0;
No need of ( ) around 'BPF_SIZE(code) == BPF_DW'
> +
> + EMIT(PPC_RAW_ADDI(b2p[TMP_REG_1], src_reg, off));
> + PPC_LI64(b2p[TMP_REG_2], TASK_SIZE_MAX);
> + EMIT(PPC_RAW_CMPLD(b2p[TMP_REG_1], b2p[TMP_REG_2]));
> + PPC_BCC(COND_GT, (ctx->idx + 4) * 4);
> + EMIT(PPC_RAW_LI(dst_reg, 0));
> + PPC_JMP((ctx->idx + 2 + adjusted_idx) * 4);
I think it would be more explicit if you drop adjusted_idx and do :
if (BPF_SIZE(code) == BPF_DW) && (off & 3)
PPC_JMP((ctx->idx + 3) * 4);
else
PPC_JMP((ctx->idx + 2) * 4);
> + }
> +
> switch (size) {
> case BPF_B:
> EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
>
^ permalink raw reply
* Re: [PATCH v2 8/8] bpf ppc32: Add addr > TASK_SIZE_MAX explicit check
From: Christophe Leroy @ 2021-09-17 16:57 UTC (permalink / raw)
To: Hari Bathini, naveen.n.rao, mpe, ast, daniel
Cc: songliubraving, netdev, john.fastabend, andrii, kpsingh, paulus,
yhs, bpf, linuxppc-dev, kafai
In-Reply-To: <20210917153047.177141-9-hbathini@linux.ibm.com>
Le 17/09/2021 à 17:30, Hari Bathini a écrit :
> With KUAP enabled, any kernel code which wants to access userspace
> needs to be surrounded by disable-enable KUAP. But that is not
> happening for BPF_PROBE_MEM load instruction. Though PPC32 does not
> support read protection, considering the fact that PTR_TO_BTF_ID
> (which uses BPF_PROBE_MEM mode) could either be a valid kernel pointer
> or NULL but should never be a pointer to userspace address, execute
> BPF_PROBE_MEM load only if addr > TASK_SIZE_MAX, otherwise set
> dst_reg=0 and move on.
Same comment as patch 6.
>
> This will catch NULL, valid or invalid userspace pointers. Only bad
> kernel pointer will be handled by BPF exception table.
>
> [Alexei suggested for x86]
> Suggested-by: Alexei Starovoitov <ast@kernel.org>
> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
> ---
>
> Changes in v2:
> * New patch to handle bad userspace pointers on PPC32.
>
>
> arch/powerpc/net/bpf_jit_comp32.c | 39 +++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
> index c6262289dcc4..faa8047fcf4a 100644
> --- a/arch/powerpc/net/bpf_jit_comp32.c
> +++ b/arch/powerpc/net/bpf_jit_comp32.c
> @@ -821,6 +821,45 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
> /* dst = *(u64 *)(ul) (src + off) */
> case BPF_LDX | BPF_MEM | BPF_DW:
> case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
> + /*
> + * As PTR_TO_BTF_ID that uses BPF_PROBE_MEM mode could either be a valid
> + * kernel pointer or NULL but not a userspace address, execute BPF_PROBE_MEM
> + * load only if addr > TASK_SIZE_MAX, otherwise set dst_reg=0 and move on.
> + */
> + if (BPF_MODE(code) == BPF_PROBE_MEM) {
> + bool extra_insn_needed = false;
> + unsigned int adjusted_idx;
> +
> + /*
> + * For BPF_DW case, "li reg_h,0" would be needed when
> + * !fp->aux->verifier_zext. Adjust conditional branch'ing
> + * address accordingly.
> + */
> + if ((size == BPF_DW) && !fp->aux->verifier_zext)
> + extra_insn_needed = true;
Don't make it too complicated. That's a fallback that should never
happen, no need to optimise. You can put that instruction all the time
(or put a NOP) and keep the jumps always the same.
> +
> + /*
> + * Need to jump two instructions instead of one for BPF_DW case
> + * as there are two load instructions for dst_reg_h & dst_reg
> + * respectively.
> + */
> + adjusted_idx = (size == BPF_DW) ? 1 : 0;
Same comment as patch 6, drop adjusted_idx and do an if/else directly
for the PPC_JMP.
> +
> + EMIT(PPC_RAW_ADDI(b2p[TMP_REG], src_reg, off));
> + PPC_LI32(_R0, TASK_SIZE_MAX);
> + EMIT(PPC_RAW_CMPLW(b2p[TMP_REG], _R0));
> + PPC_BCC(COND_GT, (ctx->idx + 4 + (extra_insn_needed ? 1 : 0)) * 4);
> + EMIT(PPC_RAW_LI(dst_reg, 0));
> + /*
> + * Note that "li reg_h,0" is emitted for BPF_B/H/W case,
> + * if necessary. So, jump there insted of emitting an
> + * additional "li reg_h,0" instruction.
> + */
> + if (extra_insn_needed)
> + EMIT(PPC_RAW_LI(dst_reg_h, 0));
> + PPC_JMP((ctx->idx + 2 + adjusted_idx) * 4);
> + }
> +
> switch (size) {
> case BPF_B:
> EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
>
^ permalink raw reply
* [powerpc:fixes-test] BUILD SUCCESS c006a06508db4841d256d82f42da392d6391f3d9
From: kernel test robot @ 2021-09-17 17:46 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git fixes-test
branch HEAD: c006a06508db4841d256d82f42da392d6391f3d9 powerpc/xics: Set the IRQ chip data for the ICS native backend
elapsed time: 1508m
configs tested: 138
configs skipped: 3
The following configs have been built successfully.
More configs may be tested in the coming days.
gcc tested configs:
arm defconfig
arm64 allyesconfig
arm64 defconfig
arm allyesconfig
arm allmodconfig
i386 randconfig-c001-20210916
sh rsk7269_defconfig
powerpc ep8248e_defconfig
riscv nommu_virt_defconfig
powerpc chrp32_defconfig
arm bcm2835_defconfig
arm at91_dt_defconfig
s390 allyesconfig
arm hisi_defconfig
sh se7780_defconfig
arm qcom_defconfig
nios2 10m50_defconfig
arc nsimosci_hs_smp_defconfig
mips ar7_defconfig
arm netwinder_defconfig
sh landisk_defconfig
um x86_64_defconfig
arm mvebu_v7_defconfig
arc nsimosci_defconfig
mips loongson1b_defconfig
sh se7712_defconfig
powerpc warp_defconfig
arm integrator_defconfig
powerpc mpc837x_rdb_defconfig
powerpc tqm8541_defconfig
powerpc klondike_defconfig
powerpc tqm8548_defconfig
powerpc kmeter1_defconfig
powerpc mpc885_ads_defconfig
arm cm_x300_defconfig
sh alldefconfig
m68k amcore_defconfig
arm oxnas_v6_defconfig
ia64 tiger_defconfig
powerpc katmai_defconfig
arm mini2440_defconfig
arm trizeps4_defconfig
xtensa cadence_csp_defconfig
arm alldefconfig
powerpc powernv_defconfig
mips rm200_defconfig
mips cu1000-neo_defconfig
arm ep93xx_defconfig
xtensa audio_kc705_defconfig
xtensa iss_defconfig
sh defconfig
x86_64 allyesconfig
powerpc storcenter_defconfig
arm keystone_defconfig
arm ezx_defconfig
mips ip27_defconfig
arm imx_v6_v7_defconfig
arm am200epdkit_defconfig
m68k mac_defconfig
mips nlm_xlr_defconfig
x86_64 randconfig-c001-20210916
arm randconfig-c002-20210916
ia64 allmodconfig
ia64 allyesconfig
ia64 defconfig
m68k allmodconfig
m68k allyesconfig
m68k defconfig
nios2 defconfig
nds32 allnoconfig
arc allyesconfig
nds32 defconfig
nios2 allyesconfig
csky defconfig
alpha defconfig
alpha allyesconfig
h8300 allyesconfig
arc defconfig
sh allmodconfig
xtensa allyesconfig
parisc allyesconfig
parisc defconfig
s390 allmodconfig
s390 defconfig
sparc allyesconfig
sparc defconfig
i386 defconfig
i386 allyesconfig
mips allyesconfig
mips allmodconfig
powerpc allyesconfig
powerpc allnoconfig
powerpc allmodconfig
x86_64 randconfig-a016-20210916
x86_64 randconfig-a013-20210916
x86_64 randconfig-a012-20210916
x86_64 randconfig-a011-20210916
x86_64 randconfig-a014-20210916
x86_64 randconfig-a015-20210916
i386 randconfig-a016-20210916
i386 randconfig-a015-20210916
i386 randconfig-a011-20210916
i386 randconfig-a012-20210916
i386 randconfig-a013-20210916
i386 randconfig-a014-20210916
riscv randconfig-r042-20210916
s390 randconfig-r044-20210916
arc randconfig-r043-20210916
riscv nommu_k210_defconfig
riscv allnoconfig
riscv defconfig
riscv rv32_defconfig
riscv allyesconfig
riscv allmodconfig
x86_64 rhel-8.3-kselftests
um i386_defconfig
x86_64 defconfig
x86_64 rhel-8.3
x86_64 kexec
clang tested configs:
riscv randconfig-c006-20210916
x86_64 randconfig-c007-20210916
mips randconfig-c004-20210916
powerpc randconfig-c003-20210916
arm randconfig-c002-20210916
i386 randconfig-c001-20210916
s390 randconfig-c005-20210916
x86_64 randconfig-a002-20210916
x86_64 randconfig-a003-20210916
x86_64 randconfig-a006-20210916
x86_64 randconfig-a004-20210916
x86_64 randconfig-a005-20210916
x86_64 randconfig-a001-20210916
i386 randconfig-a004-20210916
i386 randconfig-a005-20210916
i386 randconfig-a006-20210916
i386 randconfig-a002-20210916
i386 randconfig-a003-20210916
i386 randconfig-a001-20210916
hexagon randconfig-r045-20210916
hexagon randconfig-r041-20210916
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply
* [PATCH 3/3] powerpc/inst: Define ppc_inst_t as u32 on PPC32
From: Christophe Leroy @ 2021-09-17 18:37 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <9607dfbecab2ecccb712bbd25d2d5da882239d4c.1631903846.git.christophe.leroy@csgroup.eu>
Unlike PPC64 ABI, PPC32 uses the stack to pass a parameter defined
as a struct, even when the struct has a single simple element.
To avoid that, define ppc_inst_t as u32 on PPC32.
Keep it as 'struct ppc_inst' when __CHECKER__ is defined so that
sparse can perform type checking.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/inst.h | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h
index c4775f4c93a4..2f8d189e4d76 100644
--- a/arch/powerpc/include/asm/inst.h
+++ b/arch/powerpc/include/asm/inst.h
@@ -41,6 +41,7 @@ struct ppc_inst {
#endif
} __packed;
+#if defined(CONFIG_PPC64) || defined(__CHECKER__)
typedef struct ppc_inst ppc_inst_t;
static inline u32 ppc_inst_val(ppc_inst_t x)
@@ -48,13 +49,23 @@ static inline u32 ppc_inst_val(ppc_inst_t x)
return x.val;
}
+#define ppc_inst(x) ((ppc_inst_t){ .val = (x) })
+
+#else
+typedef u32 ppc_inst_t;
+
+static inline u32 ppc_inst_val(ppc_inst_t x)
+{
+ return x;
+}
+#define ppc_inst(x) (x)
+#endif
+
static inline int ppc_inst_primary_opcode(ppc_inst_t x)
{
return ppc_inst_val(x) >> 26;
}
-#define ppc_inst(x) ((ppc_inst_t){ .val = (x) })
-
#ifdef CONFIG_PPC64
#define ppc_inst_prefix(x, y) ((ppc_inst_t){ .val = (x), .suffix = (y) })
--
2.31.1
^ permalink raw reply related
* [PATCH 1/3] powerpc/inst: Refactor ___get_user_instr()
From: Christophe Leroy @ 2021-09-17 18:37 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
PPC64 version of ___get_user_instr() can be used for PPC32 as well,
by simply disabling the suffix part with IS_ENABLED(CONFIG_PPC64).
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/inst.h | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h
index b11c0e2f9639..fea4d46155a9 100644
--- a/arch/powerpc/include/asm/inst.h
+++ b/arch/powerpc/include/asm/inst.h
@@ -4,8 +4,6 @@
#include <asm/ppc-opcode.h>
-#ifdef CONFIG_PPC64
-
#define ___get_user_instr(gu_op, dest, ptr) \
({ \
long __gui_ret; \
@@ -16,7 +14,7 @@
__chk_user_ptr(ptr); \
__gui_ret = gu_op(__prefix, __gui_ptr); \
if (__gui_ret == 0) { \
- if ((__prefix >> 26) == OP_PREFIX) { \
+ if (IS_ENABLED(CONFIG_PPC64) && (__prefix >> 26) == OP_PREFIX) { \
__gui_ret = gu_op(__suffix, __gui_ptr + 1); \
__gui_inst = ppc_inst_prefix(__prefix, __suffix); \
} else { \
@@ -27,13 +25,6 @@
} \
__gui_ret; \
})
-#else /* !CONFIG_PPC64 */
-#define ___get_user_instr(gu_op, dest, ptr) \
-({ \
- __chk_user_ptr(ptr); \
- gu_op((dest).val, (u32 __user *)(ptr)); \
-})
-#endif /* CONFIG_PPC64 */
#define get_user_instr(x, ptr) ___get_user_instr(get_user, x, ptr)
--
2.31.1
^ permalink raw reply related
* [PATCH 2/3] powerpc/inst: Define ppc_inst_t
From: Christophe Leroy @ 2021-09-17 18:37 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <9607dfbecab2ecccb712bbd25d2d5da882239d4c.1631903846.git.christophe.leroy@csgroup.eu>
In order to stop using 'struct ppc_inst' on PPC32,
define a ppc_inst_t typedef.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/code-patching.h | 18 +++----
arch/powerpc/include/asm/hw_breakpoint.h | 4 +-
arch/powerpc/include/asm/inst.h | 34 ++++++------
arch/powerpc/include/asm/sstep.h | 4 +-
arch/powerpc/kernel/align.c | 4 +-
arch/powerpc/kernel/epapr_paravirt.c | 2 +-
arch/powerpc/kernel/hw_breakpoint.c | 4 +-
.../kernel/hw_breakpoint_constraints.c | 4 +-
arch/powerpc/kernel/kprobes.c | 4 +-
arch/powerpc/kernel/mce_power.c | 2 +-
arch/powerpc/kernel/optprobes.c | 4 +-
arch/powerpc/kernel/process.c | 2 +-
arch/powerpc/kernel/setup_32.c | 2 +-
arch/powerpc/kernel/trace/ftrace.c | 54 +++++++++----------
arch/powerpc/kernel/vecemu.c | 2 +-
arch/powerpc/lib/code-patching.c | 38 ++++++-------
arch/powerpc/lib/feature-fixups.c | 4 +-
arch/powerpc/lib/sstep.c | 4 +-
arch/powerpc/lib/test_emulate_step.c | 10 ++--
arch/powerpc/mm/maccess.c | 2 +-
arch/powerpc/perf/8xx-pmu.c | 2 +-
arch/powerpc/xmon/xmon.c | 14 ++---
arch/powerpc/xmon/xmon_bpts.h | 4 +-
23 files changed, 112 insertions(+), 110 deletions(-)
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index a95f63788c6b..a4ba9a5982fc 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -23,20 +23,20 @@
#define BRANCH_ABSOLUTE 0x2
bool is_offset_in_branch_range(long offset);
-int create_branch(struct ppc_inst *instr, const u32 *addr,
+int create_branch(ppc_inst_t *instr, const u32 *addr,
unsigned long target, int flags);
-int create_cond_branch(struct ppc_inst *instr, const u32 *addr,
+int create_cond_branch(ppc_inst_t *instr, const u32 *addr,
unsigned long target, int flags);
int patch_branch(u32 *addr, unsigned long target, int flags);
-int patch_instruction(u32 *addr, struct ppc_inst instr);
-int raw_patch_instruction(u32 *addr, struct ppc_inst instr);
+int patch_instruction(u32 *addr, ppc_inst_t instr);
+int raw_patch_instruction(u32 *addr, ppc_inst_t instr);
static inline unsigned long patch_site_addr(s32 *site)
{
return (unsigned long)site + *site;
}
-static inline int patch_instruction_site(s32 *site, struct ppc_inst instr)
+static inline int patch_instruction_site(s32 *site, ppc_inst_t instr)
{
return patch_instruction((u32 *)patch_site_addr(site), instr);
}
@@ -57,11 +57,11 @@ static inline int modify_instruction_site(s32 *site, unsigned int clr, unsigned
return modify_instruction((unsigned int *)patch_site_addr(site), clr, set);
}
-int instr_is_relative_branch(struct ppc_inst instr);
-int instr_is_relative_link_branch(struct ppc_inst instr);
+int instr_is_relative_branch(ppc_inst_t instr);
+int instr_is_relative_link_branch(ppc_inst_t instr);
unsigned long branch_target(const u32 *instr);
-int translate_branch(struct ppc_inst *instr, const u32 *dest, const u32 *src);
-extern bool is_conditional_branch(struct ppc_inst instr);
+int translate_branch(ppc_inst_t *instr, const u32 *dest, const u32 *src);
+extern bool is_conditional_branch(ppc_inst_t instr);
#ifdef CONFIG_PPC_BOOK3E_64
void __patch_exception(int exc, unsigned long addr);
#define patch_exception(exc, name) do { \
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index abebfbee5b1c..88053d3c68e6 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -56,11 +56,11 @@ static inline int nr_wp_slots(void)
return cpu_has_feature(CPU_FTR_DAWR1) ? 2 : 1;
}
-bool wp_check_constraints(struct pt_regs *regs, struct ppc_inst instr,
+bool wp_check_constraints(struct pt_regs *regs, ppc_inst_t instr,
unsigned long ea, int type, int size,
struct arch_hw_breakpoint *info);
-void wp_get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
+void wp_get_instr_detail(struct pt_regs *regs, ppc_inst_t *instr,
int *type, int *size, unsigned long *ea);
#ifdef CONFIG_HAVE_HW_BREAKPOINT
diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h
index fea4d46155a9..c4775f4c93a4 100644
--- a/arch/powerpc/include/asm/inst.h
+++ b/arch/powerpc/include/asm/inst.h
@@ -8,7 +8,7 @@
({ \
long __gui_ret; \
u32 __user *__gui_ptr = (u32 __user *)ptr; \
- struct ppc_inst __gui_inst; \
+ ppc_inst_t __gui_inst; \
unsigned int __prefix, __suffix; \
\
__chk_user_ptr(ptr); \
@@ -41,22 +41,24 @@ struct ppc_inst {
#endif
} __packed;
-static inline u32 ppc_inst_val(struct ppc_inst x)
+typedef struct ppc_inst ppc_inst_t;
+
+static inline u32 ppc_inst_val(ppc_inst_t x)
{
return x.val;
}
-static inline int ppc_inst_primary_opcode(struct ppc_inst x)
+static inline int ppc_inst_primary_opcode(ppc_inst_t x)
{
return ppc_inst_val(x) >> 26;
}
-#define ppc_inst(x) ((struct ppc_inst){ .val = (x) })
+#define ppc_inst(x) ((ppc_inst_t){ .val = (x) })
#ifdef CONFIG_PPC64
-#define ppc_inst_prefix(x, y) ((struct ppc_inst){ .val = (x), .suffix = (y) })
+#define ppc_inst_prefix(x, y) ((ppc_inst_t){ .val = (x), .suffix = (y) })
-static inline u32 ppc_inst_suffix(struct ppc_inst x)
+static inline u32 ppc_inst_suffix(ppc_inst_t x)
{
return x.suffix;
}
@@ -64,14 +66,14 @@ static inline u32 ppc_inst_suffix(struct ppc_inst x)
#else
#define ppc_inst_prefix(x, y) ppc_inst(x)
-static inline u32 ppc_inst_suffix(struct ppc_inst x)
+static inline u32 ppc_inst_suffix(ppc_inst_t x)
{
return 0;
}
#endif /* CONFIG_PPC64 */
-static inline struct ppc_inst ppc_inst_read(const u32 *ptr)
+static inline ppc_inst_t ppc_inst_read(const u32 *ptr)
{
if (IS_ENABLED(CONFIG_PPC64) && (*ptr >> 26) == OP_PREFIX)
return ppc_inst_prefix(*ptr, *(ptr + 1));
@@ -79,17 +81,17 @@ static inline struct ppc_inst ppc_inst_read(const u32 *ptr)
return ppc_inst(*ptr);
}
-static inline bool ppc_inst_prefixed(struct ppc_inst x)
+static inline bool ppc_inst_prefixed(ppc_inst_t x)
{
return IS_ENABLED(CONFIG_PPC64) && ppc_inst_primary_opcode(x) == OP_PREFIX;
}
-static inline struct ppc_inst ppc_inst_swab(struct ppc_inst x)
+static inline ppc_inst_t ppc_inst_swab(ppc_inst_t x)
{
return ppc_inst_prefix(swab32(ppc_inst_val(x)), swab32(ppc_inst_suffix(x)));
}
-static inline bool ppc_inst_equal(struct ppc_inst x, struct ppc_inst y)
+static inline bool ppc_inst_equal(ppc_inst_t x, ppc_inst_t y)
{
if (ppc_inst_val(x) != ppc_inst_val(y))
return false;
@@ -98,7 +100,7 @@ static inline bool ppc_inst_equal(struct ppc_inst x, struct ppc_inst y)
return ppc_inst_suffix(x) == ppc_inst_suffix(y);
}
-static inline int ppc_inst_len(struct ppc_inst x)
+static inline int ppc_inst_len(ppc_inst_t x)
{
return ppc_inst_prefixed(x) ? 8 : 4;
}
@@ -109,14 +111,14 @@ static inline int ppc_inst_len(struct ppc_inst x)
*/
static inline u32 *ppc_inst_next(u32 *location, u32 *value)
{
- struct ppc_inst tmp;
+ ppc_inst_t tmp;
tmp = ppc_inst_read(value);
return (void *)location + ppc_inst_len(tmp);
}
-static inline unsigned long ppc_inst_as_ulong(struct ppc_inst x)
+static inline unsigned long ppc_inst_as_ulong(ppc_inst_t x)
{
if (IS_ENABLED(CONFIG_PPC32))
return ppc_inst_val(x);
@@ -128,7 +130,7 @@ static inline unsigned long ppc_inst_as_ulong(struct ppc_inst x)
#define PPC_INST_STR_LEN sizeof("00000000 00000000")
-static inline char *__ppc_inst_as_str(char str[PPC_INST_STR_LEN], struct ppc_inst x)
+static inline char *__ppc_inst_as_str(char str[PPC_INST_STR_LEN], ppc_inst_t x)
{
if (ppc_inst_prefixed(x))
sprintf(str, "%08x %08x", ppc_inst_val(x), ppc_inst_suffix(x));
@@ -145,6 +147,6 @@ static inline char *__ppc_inst_as_str(char str[PPC_INST_STR_LEN], struct ppc_ins
__str; \
})
-int copy_inst_from_kernel_nofault(struct ppc_inst *inst, u32 *src);
+int copy_inst_from_kernel_nofault(ppc_inst_t *inst, u32 *src);
#endif /* _ASM_POWERPC_INST_H */
diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h
index 1df867c2e054..9940f077d581 100644
--- a/arch/powerpc/include/asm/sstep.h
+++ b/arch/powerpc/include/asm/sstep.h
@@ -145,7 +145,7 @@ union vsx_reg {
* otherwise.
*/
extern int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
- struct ppc_inst instr);
+ ppc_inst_t instr);
/*
* Emulate an instruction that can be executed just by updating
@@ -162,7 +162,7 @@ void emulate_update_regs(struct pt_regs *reg, struct instruction_op *op);
* 0 if it could not be emulated, or -1 for an instruction that
* should not be emulated (rfid, mtmsrd clearing MSR_RI, etc.).
*/
-extern int emulate_step(struct pt_regs *regs, struct ppc_inst instr);
+extern int emulate_step(struct pt_regs *regs, ppc_inst_t instr);
/*
* Emulate a load or store instruction by reading/writing the
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index bbb4181621dd..c0c9ce1dbfa6 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -105,7 +105,7 @@ static struct aligninfo spe_aligninfo[32] = {
* so we don't need the address swizzling.
*/
static int emulate_spe(struct pt_regs *regs, unsigned int reg,
- struct ppc_inst ppc_instr)
+ ppc_inst_t ppc_instr)
{
union {
u64 ll;
@@ -300,7 +300,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
int fix_alignment(struct pt_regs *regs)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
struct instruction_op op;
int r, type;
diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c
index 93b0f3ec8fb0..d4b8aff20815 100644
--- a/arch/powerpc/kernel/epapr_paravirt.c
+++ b/arch/powerpc/kernel/epapr_paravirt.c
@@ -37,7 +37,7 @@ static int __init early_init_dt_scan_epapr(unsigned long node,
return -1;
for (i = 0; i < (len / 4); i++) {
- struct ppc_inst inst = ppc_inst(be32_to_cpu(insts[i]));
+ ppc_inst_t inst = ppc_inst(be32_to_cpu(insts[i]));
patch_instruction(epapr_hypercall_start + i, inst);
#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
patch_instruction(epapr_ev_idle_start + i, inst);
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 91a3be14808b..2669f80b3a49 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -523,7 +523,7 @@ static void larx_stcx_err(struct perf_event *bp, struct arch_hw_breakpoint *info
static bool stepping_handler(struct pt_regs *regs, struct perf_event **bp,
struct arch_hw_breakpoint **info, int *hit,
- struct ppc_inst instr)
+ ppc_inst_t instr)
{
int i;
int stepped;
@@ -616,7 +616,7 @@ int hw_breakpoint_handler(struct die_args *args)
int hit[HBP_NUM_MAX] = {0};
int nr_hit = 0;
bool ptrace_bp = false;
- struct ppc_inst instr = ppc_inst(0);
+ ppc_inst_t instr = ppc_inst(0);
int type = 0;
int size = 0;
unsigned long ea;
diff --git a/arch/powerpc/kernel/hw_breakpoint_constraints.c b/arch/powerpc/kernel/hw_breakpoint_constraints.c
index 675d1f66ab72..484d285c4b86 100644
--- a/arch/powerpc/kernel/hw_breakpoint_constraints.c
+++ b/arch/powerpc/kernel/hw_breakpoint_constraints.c
@@ -80,7 +80,7 @@ static bool check_dawrx_constraints(struct pt_regs *regs, int type,
* Return true if the event is valid wrt dawr configuration,
* including extraneous exception. Otherwise return false.
*/
-bool wp_check_constraints(struct pt_regs *regs, struct ppc_inst instr,
+bool wp_check_constraints(struct pt_regs *regs, ppc_inst_t instr,
unsigned long ea, int type, int size,
struct arch_hw_breakpoint *info)
{
@@ -136,7 +136,7 @@ static int cache_op_size(void)
#endif
}
-void wp_get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
+void wp_get_instr_detail(struct pt_regs *regs, ppc_inst_t *instr,
int *type, int *size, unsigned long *ea)
{
struct instruction_op op;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 7a7cd6bda53e..89173338e2fa 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -124,7 +124,7 @@ int arch_prepare_kprobe(struct kprobe *p)
{
int ret = 0;
struct kprobe *prev;
- struct ppc_inst insn = ppc_inst_read(p->addr);
+ ppc_inst_t insn = ppc_inst_read(p->addr);
if ((unsigned long)p->addr & 0x03) {
printk("Attempt to register kprobe at an unaligned address\n");
@@ -244,7 +244,7 @@ NOKPROBE_SYMBOL(arch_prepare_kretprobe);
static int try_to_emulate(struct kprobe *p, struct pt_regs *regs)
{
int ret;
- struct ppc_inst insn = ppc_inst_read(p->ainsn.insn);
+ ppc_inst_t insn = ppc_inst_read(p->ainsn.insn);
/* regs->nip is also adjusted if emulate_step returns 1 */
ret = emulate_step(regs, insn);
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index c2f55fe7092d..f2dd4daeddf8 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -455,7 +455,7 @@ static int mce_find_instr_ea_and_phys(struct pt_regs *regs, uint64_t *addr,
* in real-mode is tricky and can lead to recursive
* faults
*/
- struct ppc_inst instr;
+ ppc_inst_t instr;
unsigned long pfn, instr_addr;
struct instruction_op op;
struct pt_regs tmp = *regs;
diff --git a/arch/powerpc/kernel/optprobes.c b/arch/powerpc/kernel/optprobes.c
index c79899abcec8..04b540c12800 100644
--- a/arch/powerpc/kernel/optprobes.c
+++ b/arch/powerpc/kernel/optprobes.c
@@ -153,7 +153,7 @@ static void patch_imm_load_insns(unsigned long val, int reg, kprobe_opcode_t *ad
int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
{
- struct ppc_inst branch_op_callback, branch_emulate_step, temp;
+ ppc_inst_t branch_op_callback, branch_emulate_step, temp;
unsigned long op_callback_addr, emulate_step_addr;
kprobe_opcode_t *buff;
long b_offset;
@@ -269,7 +269,7 @@ int arch_check_optimized_kprobe(struct optimized_kprobe *op)
void arch_optimize_kprobes(struct list_head *oplist)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
struct optimized_kprobe *op;
struct optimized_kprobe *tmp;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 50436b52c213..bcb7bfaea011 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -628,7 +628,7 @@ static void do_break_handler(struct pt_regs *regs)
{
struct arch_hw_breakpoint null_brk = {0};
struct arch_hw_breakpoint *info;
- struct ppc_inst instr = ppc_inst(0);
+ ppc_inst_t instr = ppc_inst(0);
int type = 0;
int size = 0;
unsigned long ea;
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 7ec5c47fce0e..4017b05ef643 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(DMA_MODE_WRITE);
notrace void __init machine_init(u64 dt_ptr)
{
u32 *addr = (u32 *)patch_site_addr(&patch__memset_nocache);
- struct ppc_inst insn;
+ ppc_inst_t insn;
/* Configure static keys first, now that we're relocated. */
setup_feature_keys();
diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index d89c5df4f206..f293294ef5da 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -41,10 +41,10 @@
#define NUM_FTRACE_TRAMPS 8
static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
-static struct ppc_inst
+static ppc_inst_t
ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
- struct ppc_inst op;
+ ppc_inst_t op;
addr = ppc_function_entry((void *)addr);
@@ -55,9 +55,9 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
}
static int
-ftrace_modify_code(unsigned long ip, struct ppc_inst old, struct ppc_inst new)
+ftrace_modify_code(unsigned long ip, ppc_inst_t old, ppc_inst_t new)
{
- struct ppc_inst replaced;
+ ppc_inst_t replaced;
/*
* Note:
@@ -90,24 +90,24 @@ ftrace_modify_code(unsigned long ip, struct ppc_inst old, struct ppc_inst new)
*/
static int test_24bit_addr(unsigned long ip, unsigned long addr)
{
- struct ppc_inst op;
+ ppc_inst_t op;
addr = ppc_function_entry((void *)addr);
/* use the create_branch to verify that this offset can be branched */
return create_branch(&op, (u32 *)ip, addr, 0) == 0;
}
-static int is_bl_op(struct ppc_inst op)
+static int is_bl_op(ppc_inst_t op)
{
return (ppc_inst_val(op) & 0xfc000003) == 0x48000001;
}
-static int is_b_op(struct ppc_inst op)
+static int is_b_op(ppc_inst_t op)
{
return (ppc_inst_val(op) & 0xfc000003) == 0x48000000;
}
-static unsigned long find_bl_target(unsigned long ip, struct ppc_inst op)
+static unsigned long find_bl_target(unsigned long ip, ppc_inst_t op)
{
int offset;
@@ -127,7 +127,7 @@ __ftrace_make_nop(struct module *mod,
{
unsigned long entry, ptr, tramp;
unsigned long ip = rec->ip;
- struct ppc_inst op, pop;
+ ppc_inst_t op, pop;
/* read where this goes */
if (copy_inst_from_kernel_nofault(&op, (void *)ip)) {
@@ -221,7 +221,7 @@ static int
__ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
- struct ppc_inst op;
+ ppc_inst_t op;
unsigned int jmp[4];
unsigned long ip = rec->ip;
unsigned long tramp;
@@ -291,7 +291,7 @@ __ftrace_make_nop(struct module *mod,
static unsigned long find_ftrace_tramp(unsigned long ip)
{
int i;
- struct ppc_inst instr;
+ ppc_inst_t instr;
/*
* We have the compiler generated long_branch tramps at the end
@@ -329,9 +329,9 @@ static int add_ftrace_tramp(unsigned long tramp)
static int setup_mcount_compiler_tramp(unsigned long tramp)
{
int i;
- struct ppc_inst op;
+ ppc_inst_t op;
unsigned long ptr;
- struct ppc_inst instr;
+ ppc_inst_t instr;
static unsigned long ftrace_plt_tramps[NUM_FTRACE_TRAMPS];
/* Is this a known long jump tramp? */
@@ -396,7 +396,7 @@ static int setup_mcount_compiler_tramp(unsigned long tramp)
static int __ftrace_make_nop_kernel(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long tramp, ip = rec->ip;
- struct ppc_inst op;
+ ppc_inst_t op;
/* Read where this goes */
if (copy_inst_from_kernel_nofault(&op, (void *)ip)) {
@@ -436,7 +436,7 @@ int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
/*
* If the calling address is more that 24 bits away,
@@ -489,7 +489,7 @@ int ftrace_make_nop(struct module *mod,
*/
#ifndef CONFIG_MPROFILE_KERNEL
static int
-expected_nop_sequence(void *ip, struct ppc_inst op0, struct ppc_inst op1)
+expected_nop_sequence(void *ip, ppc_inst_t op0, ppc_inst_t op1)
{
/*
* We expect to see:
@@ -507,7 +507,7 @@ expected_nop_sequence(void *ip, struct ppc_inst op0, struct ppc_inst op1)
}
#else
static int
-expected_nop_sequence(void *ip, struct ppc_inst op0, struct ppc_inst op1)
+expected_nop_sequence(void *ip, ppc_inst_t op0, ppc_inst_t op1)
{
/* look for patched "NOP" on ppc64 with -mprofile-kernel */
if (!ppc_inst_equal(op0, ppc_inst(PPC_RAW_NOP())))
@@ -519,8 +519,8 @@ expected_nop_sequence(void *ip, struct ppc_inst op0, struct ppc_inst op1)
static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
- struct ppc_inst op[2];
- struct ppc_inst instr;
+ ppc_inst_t op[2];
+ ppc_inst_t instr;
void *ip = (void *)rec->ip;
unsigned long entry, ptr, tramp;
struct module *mod = rec->arch.mod;
@@ -588,7 +588,7 @@ static int
__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
int err;
- struct ppc_inst op;
+ ppc_inst_t op;
u32 *ip = (u32 *)rec->ip;
/* read where this goes */
@@ -626,7 +626,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
static int __ftrace_make_call_kernel(struct dyn_ftrace *rec, unsigned long addr)
{
- struct ppc_inst op;
+ ppc_inst_t op;
void *ip = (void *)rec->ip;
unsigned long tramp, entry, ptr;
@@ -674,7 +674,7 @@ static int __ftrace_make_call_kernel(struct dyn_ftrace *rec, unsigned long addr)
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
/*
* If the calling address is more that 24 bits away,
@@ -713,7 +713,7 @@ static int
__ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
- struct ppc_inst op;
+ ppc_inst_t op;
unsigned long ip = rec->ip;
unsigned long entry, ptr, tramp;
struct module *mod = rec->arch.mod;
@@ -807,7 +807,7 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long addr)
{
unsigned long ip = rec->ip;
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
/*
* If the calling address is more that 24 bits away,
@@ -847,7 +847,7 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
int ret;
old = ppc_inst_read((u32 *)&ftrace_call);
@@ -932,7 +932,7 @@ int ftrace_enable_ftrace_graph_caller(void)
unsigned long ip = (unsigned long)(&ftrace_graph_call);
unsigned long addr = (unsigned long)(&ftrace_graph_caller);
unsigned long stub = (unsigned long)(&ftrace_graph_stub);
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
old = ftrace_call_replace(ip, stub, 0);
new = ftrace_call_replace(ip, addr, 0);
@@ -945,7 +945,7 @@ int ftrace_disable_ftrace_graph_caller(void)
unsigned long ip = (unsigned long)(&ftrace_graph_call);
unsigned long addr = (unsigned long)(&ftrace_graph_caller);
unsigned long stub = (unsigned long)(&ftrace_graph_stub);
- struct ppc_inst old, new;
+ ppc_inst_t old, new;
old = ftrace_call_replace(ip, addr, 0);
new = ftrace_call_replace(ip, stub, 0);
diff --git a/arch/powerpc/kernel/vecemu.c b/arch/powerpc/kernel/vecemu.c
index ae632569446f..fd9432875ebc 100644
--- a/arch/powerpc/kernel/vecemu.c
+++ b/arch/powerpc/kernel/vecemu.c
@@ -261,7 +261,7 @@ static unsigned int rfin(unsigned int x)
int emulate_altivec(struct pt_regs *regs)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
unsigned int i, word;
unsigned int va, vb, vc, vd;
vector128 *vrs;
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index f9a3019e37b4..d1fd21d254a1 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -18,7 +18,7 @@
#include <asm/setup.h>
#include <asm/inst.h>
-static int __patch_instruction(u32 *exec_addr, struct ppc_inst instr, u32 *patch_addr)
+static int __patch_instruction(u32 *exec_addr, ppc_inst_t instr, u32 *patch_addr)
{
if (!ppc_inst_prefixed(instr)) {
u32 val = ppc_inst_val(instr);
@@ -39,7 +39,7 @@ static int __patch_instruction(u32 *exec_addr, struct ppc_inst instr, u32 *patch
return -EFAULT;
}
-int raw_patch_instruction(u32 *addr, struct ppc_inst instr)
+int raw_patch_instruction(u32 *addr, ppc_inst_t instr)
{
return __patch_instruction(addr, instr, addr);
}
@@ -141,7 +141,7 @@ static inline int unmap_patch_area(unsigned long addr)
return 0;
}
-static int do_patch_instruction(u32 *addr, struct ppc_inst instr)
+static int do_patch_instruction(u32 *addr, ppc_inst_t instr)
{
int err;
u32 *patch_addr = NULL;
@@ -180,14 +180,14 @@ static int do_patch_instruction(u32 *addr, struct ppc_inst instr)
}
#else /* !CONFIG_STRICT_KERNEL_RWX */
-static int do_patch_instruction(u32 *addr, struct ppc_inst instr)
+static int do_patch_instruction(u32 *addr, ppc_inst_t instr)
{
return raw_patch_instruction(addr, instr);
}
#endif /* CONFIG_STRICT_KERNEL_RWX */
-int patch_instruction(u32 *addr, struct ppc_inst instr)
+int patch_instruction(u32 *addr, ppc_inst_t instr)
{
/* Make sure we aren't patching a freed init section */
if (init_mem_is_free && init_section_contains(addr, 4)) {
@@ -200,7 +200,7 @@ NOKPROBE_SYMBOL(patch_instruction);
int patch_branch(u32 *addr, unsigned long target, int flags)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
create_branch(&instr, addr, target, flags);
return patch_instruction(addr, instr);
@@ -232,7 +232,7 @@ bool is_offset_in_branch_range(long offset)
* Helper to check if a given instruction is a conditional branch
* Derived from the conditional checks in analyse_instr()
*/
-bool is_conditional_branch(struct ppc_inst instr)
+bool is_conditional_branch(ppc_inst_t instr)
{
unsigned int opcode = ppc_inst_primary_opcode(instr);
@@ -250,7 +250,7 @@ bool is_conditional_branch(struct ppc_inst instr)
}
NOKPROBE_SYMBOL(is_conditional_branch);
-int create_branch(struct ppc_inst *instr, const u32 *addr,
+int create_branch(ppc_inst_t *instr, const u32 *addr,
unsigned long target, int flags)
{
long offset;
@@ -270,7 +270,7 @@ int create_branch(struct ppc_inst *instr, const u32 *addr,
return 0;
}
-int create_cond_branch(struct ppc_inst *instr, const u32 *addr,
+int create_cond_branch(ppc_inst_t *instr, const u32 *addr,
unsigned long target, int flags)
{
long offset;
@@ -289,22 +289,22 @@ int create_cond_branch(struct ppc_inst *instr, const u32 *addr,
return 0;
}
-static unsigned int branch_opcode(struct ppc_inst instr)
+static unsigned int branch_opcode(ppc_inst_t instr)
{
return ppc_inst_primary_opcode(instr) & 0x3F;
}
-static int instr_is_branch_iform(struct ppc_inst instr)
+static int instr_is_branch_iform(ppc_inst_t instr)
{
return branch_opcode(instr) == 18;
}
-static int instr_is_branch_bform(struct ppc_inst instr)
+static int instr_is_branch_bform(ppc_inst_t instr)
{
return branch_opcode(instr) == 16;
}
-int instr_is_relative_branch(struct ppc_inst instr)
+int instr_is_relative_branch(ppc_inst_t instr)
{
if (ppc_inst_val(instr) & BRANCH_ABSOLUTE)
return 0;
@@ -312,7 +312,7 @@ int instr_is_relative_branch(struct ppc_inst instr)
return instr_is_branch_iform(instr) || instr_is_branch_bform(instr);
}
-int instr_is_relative_link_branch(struct ppc_inst instr)
+int instr_is_relative_link_branch(ppc_inst_t instr)
{
return instr_is_relative_branch(instr) && (ppc_inst_val(instr) & BRANCH_SET_LINK);
}
@@ -359,7 +359,7 @@ unsigned long branch_target(const u32 *instr)
return 0;
}
-int translate_branch(struct ppc_inst *instr, const u32 *dest, const u32 *src)
+int translate_branch(ppc_inst_t *instr, const u32 *dest, const u32 *src)
{
unsigned long target;
target = branch_target(src);
@@ -412,7 +412,7 @@ static void __init test_trampoline(void)
static void __init test_branch_iform(void)
{
int err;
- struct ppc_inst instr;
+ ppc_inst_t instr;
u32 tmp[2];
u32 *iptr = tmp;
unsigned long addr = (unsigned long)tmp;
@@ -494,7 +494,7 @@ static void __init test_create_function_call(void)
{
u32 *iptr;
unsigned long dest;
- struct ppc_inst instr;
+ ppc_inst_t instr;
/* Check we can create a function call */
iptr = (u32 *)ppc_function_entry(test_trampoline);
@@ -508,7 +508,7 @@ static void __init test_branch_bform(void)
{
int err;
unsigned long addr;
- struct ppc_inst instr;
+ ppc_inst_t instr;
u32 tmp[2];
u32 *iptr = tmp;
unsigned int flags;
@@ -586,7 +586,7 @@ static void __init test_translate_branch(void)
{
unsigned long addr;
void *p, *q;
- struct ppc_inst instr;
+ ppc_inst_t instr;
void *buf;
buf = vmalloc(PAGE_ALIGN(0x2000000 + 1));
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index cda17bee5afe..e4502ab949ae 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -47,7 +47,7 @@ static u32 *calc_addr(struct fixup_entry *fcur, long offset)
static int patch_alt_instruction(u32 *src, u32 *dest, u32 *alt_start, u32 *alt_end)
{
int err;
- struct ppc_inst instr;
+ ppc_inst_t instr;
instr = ppc_inst_read(src);
@@ -613,7 +613,7 @@ void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
static void do_final_fixups(void)
{
#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
- struct ppc_inst inst;
+ ppc_inst_t inst;
u32 *src, *dest, *end;
if (PHYSICAL_START == 0)
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index d8d5f901cee1..da8cd6a21ae2 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -1271,7 +1271,7 @@ static nokprobe_inline int trap_compare(long v1, long v2)
* otherwise.
*/
int analyse_instr(struct instruction_op *op, const struct pt_regs *regs,
- struct ppc_inst instr)
+ ppc_inst_t instr)
{
#ifdef CONFIG_PPC64
unsigned int suffixopcode, prefixtype, prefix_r;
@@ -3495,7 +3495,7 @@ NOKPROBE_SYMBOL(emulate_loadstore);
* or -1 if the instruction is one that should not be stepped,
* such as an rfid, or a mtmsrd that would clear MSR_RI.
*/
-int emulate_step(struct pt_regs *regs, struct ppc_inst instr)
+int emulate_step(struct pt_regs *regs, ppc_inst_t instr)
{
struct instruction_op op;
int r, err, type;
diff --git a/arch/powerpc/lib/test_emulate_step.c b/arch/powerpc/lib/test_emulate_step.c
index 8b4f6b3e96c4..4f141daafcff 100644
--- a/arch/powerpc/lib/test_emulate_step.c
+++ b/arch/powerpc/lib/test_emulate_step.c
@@ -792,7 +792,7 @@ static void __init test_lxvpx_stxvpx(void)
#ifdef CONFIG_VSX
static void __init test_plxvp_pstxvp(void)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
struct pt_regs regs;
union {
vector128 a;
@@ -906,7 +906,7 @@ struct compute_test {
struct {
char *descr;
unsigned long flags;
- struct ppc_inst instr;
+ ppc_inst_t instr;
struct pt_regs regs;
} subtests[MAX_SUBTESTS + 1];
};
@@ -1600,7 +1600,7 @@ static struct compute_test compute_tests[] = {
};
static int __init emulate_compute_instr(struct pt_regs *regs,
- struct ppc_inst instr,
+ ppc_inst_t instr,
bool negative)
{
int analysed;
@@ -1627,7 +1627,7 @@ static int __init emulate_compute_instr(struct pt_regs *regs,
}
static int __init execute_compute_instr(struct pt_regs *regs,
- struct ppc_inst instr)
+ ppc_inst_t instr)
{
extern int exec_instr(struct pt_regs *regs);
@@ -1658,7 +1658,7 @@ static void __init run_tests_compute(void)
struct compute_test *test;
struct pt_regs *regs, exp, got;
unsigned int i, j, k;
- struct ppc_inst instr;
+ ppc_inst_t instr;
bool ignore_gpr, ignore_xer, ignore_ccr, passed, rc, negative;
for (i = 0; i < ARRAY_SIZE(compute_tests); i++) {
diff --git a/arch/powerpc/mm/maccess.c b/arch/powerpc/mm/maccess.c
index aad7c47e0030..5abae96b2b46 100644
--- a/arch/powerpc/mm/maccess.c
+++ b/arch/powerpc/mm/maccess.c
@@ -12,7 +12,7 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
return is_kernel_addr((unsigned long)unsafe_src);
}
-int copy_inst_from_kernel_nofault(struct ppc_inst *inst, u32 *src)
+int copy_inst_from_kernel_nofault(ppc_inst_t *inst, u32 *src)
{
unsigned int val, suffix;
int err;
diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c
index f970d1510d3d..4738c4dbf567 100644
--- a/arch/powerpc/perf/8xx-pmu.c
+++ b/arch/powerpc/perf/8xx-pmu.c
@@ -153,7 +153,7 @@ static void mpc8xx_pmu_read(struct perf_event *event)
static void mpc8xx_pmu_del(struct perf_event *event, int flags)
{
- struct ppc_inst insn = ppc_inst(PPC_RAW_MFSPR(10, SPRN_SPRG_SCRATCH2));
+ ppc_inst_t insn = ppc_inst(PPC_RAW_MFSPR(10, SPRN_SPRG_SCRATCH2));
mpc8xx_pmu_read(event);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index dd8241c009e5..da9e89485d7a 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -125,7 +125,7 @@ static unsigned bpinstr = 0x7fe00008; /* trap */
static int cmds(struct pt_regs *);
static int mread(unsigned long, void *, int);
static int mwrite(unsigned long, void *, int);
-static int mread_instr(unsigned long, struct ppc_inst *);
+static int mread_instr(unsigned long, ppc_inst_t *);
static int handle_fault(struct pt_regs *);
static void byterev(unsigned char *, int);
static void memex(void);
@@ -908,7 +908,7 @@ static struct bpt *new_breakpoint(unsigned long a)
static void insert_bpts(void)
{
int i;
- struct ppc_inst instr, instr2;
+ ppc_inst_t instr, instr2;
struct bpt *bp, *bp2;
bp = bpts;
@@ -988,7 +988,7 @@ static void remove_bpts(void)
{
int i;
struct bpt *bp;
- struct ppc_inst instr;
+ ppc_inst_t instr;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
@@ -1204,7 +1204,7 @@ static int do_step(struct pt_regs *regs)
*/
static int do_step(struct pt_regs *regs)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
int stepped;
force_enable_xmon();
@@ -1459,7 +1459,7 @@ csum(void)
*/
static long check_bp_loc(unsigned long addr)
{
- struct ppc_inst instr;
+ ppc_inst_t instr;
addr &= ~3;
if (!is_kernel_addr(addr)) {
@@ -2300,7 +2300,7 @@ mwrite(unsigned long adrs, void *buf, int size)
}
static int
-mread_instr(unsigned long adrs, struct ppc_inst *instr)
+mread_instr(unsigned long adrs, ppc_inst_t *instr)
{
volatile int n;
@@ -3020,7 +3020,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
{
int nr, dotted;
unsigned long first_adr;
- struct ppc_inst inst, last_inst = ppc_inst(0);
+ ppc_inst_t inst, last_inst = ppc_inst(0);
dotted = 0;
for (first_adr = adr; count > 0; --count, adr += ppc_inst_len(inst)) {
diff --git a/arch/powerpc/xmon/xmon_bpts.h b/arch/powerpc/xmon/xmon_bpts.h
index 57e6fb03de48..377068f52edb 100644
--- a/arch/powerpc/xmon/xmon_bpts.h
+++ b/arch/powerpc/xmon/xmon_bpts.h
@@ -5,8 +5,8 @@
#define NBPTS 256
#ifndef __ASSEMBLY__
#include <asm/inst.h>
-#define BPT_SIZE (sizeof(struct ppc_inst) * 2)
-#define BPT_WORDS (BPT_SIZE / sizeof(struct ppc_inst))
+#define BPT_SIZE (sizeof(ppc_inst_t) * 2)
+#define BPT_WORDS (BPT_SIZE / sizeof(ppc_inst_t))
extern unsigned int bpt_table[NBPTS * BPT_WORDS];
#endif /* __ASSEMBLY__ */
--
2.31.1
^ permalink raw reply related
* Re: [PATCH v5 6/6] sched/fair: Consider SMT in ASYM_PACKING load balance
From: Peter Zijlstra @ 2021-09-17 18:46 UTC (permalink / raw)
To: Vincent Guittot
Cc: Juri Lelli, Aubrey Li, Srikar Dronamraju, Ravi V. Shankar,
Ricardo Neri, Ben Segall, Srinivas Pandruvada,
Joel Fernandes (Google), Ingo Molnar, Rafael J . Wysocki,
Steven Rostedt, Mel Gorman, Len Brown, Ricardo Neri,
Nicholas Piggin, Aubrey Li, Dietmar Eggemann, Tim Chen,
Quentin Perret, linuxppc-dev, linux-kernel,
Daniel Bristot de Oliveira
In-Reply-To: <CAKfTPtCh72m86pbT5vY_rWzU79Q9NP9t6mcrO8ewbZkBJdN03Q@mail.gmail.com>
On Fri, Sep 17, 2021 at 05:25:02PM +0200, Vincent Guittot wrote:
> With the removal of the condition !sds->local_stat.sum_nr_running
> which seems useless because dst_cpu is idle and not SMT, this patch
> looks good to me
I've made it look like this. Thanks!
---
Subject: sched/fair: Consider SMT in ASYM_PACKING load balance
From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Date: Fri, 10 Sep 2021 18:18:19 -0700
From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
When deciding to pull tasks in ASYM_PACKING, it is necessary not only to
check for the idle state of the destination CPU, dst_cpu, but also of
its SMT siblings.
If dst_cpu is idle but its SMT siblings are busy, performance suffers
if it pulls tasks from a medium priority CPU that does not have SMT
siblings.
Implement asym_smt_can_pull_tasks() to inspect the state of the SMT
siblings of both dst_cpu and the CPUs in the candidate busiest group.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Len Brown <len.brown@intel.com>
Link: https://lkml.kernel.org/r/20210911011819.12184-7-ricardo.neri-calderon@linux.intel.com
---
kernel/sched/fair.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -8538,10 +8538,96 @@ group_type group_classify(unsigned int i
return group_has_spare;
}
+/**
+ * asym_smt_can_pull_tasks - Check whether the load balancing CPU can pull tasks
+ * @dst_cpu: Destination CPU of the load balancing
+ * @sds: Load-balancing data with statistics of the local group
+ * @sgs: Load-balancing statistics of the candidate busiest group
+ * @sg: The candidate busiest group
+ *
+ * Check the state of the SMT siblings of both @sds::local and @sg and decide
+ * if @dst_cpu can pull tasks.
+ *
+ * If @dst_cpu does not have SMT siblings, it can pull tasks if two or more of
+ * the SMT siblings of @sg are busy. If only one CPU in @sg is busy, pull tasks
+ * only if @dst_cpu has higher priority.
+ *
+ * If both @dst_cpu and @sg have SMT siblings, and @sg has exactly one more
+ * busy CPU than @sds::local, let @dst_cpu pull tasks if it has higher priority.
+ * Bigger imbalances in the number of busy CPUs will be dealt with in
+ * update_sd_pick_busiest().
+ *
+ * If @sg does not have SMT siblings, only pull tasks if all of the SMT siblings
+ * of @dst_cpu are idle and @sg has lower priority.
+ */
+static bool asym_smt_can_pull_tasks(int dst_cpu, struct sd_lb_stats *sds,
+ struct sg_lb_stats *sgs,
+ struct sched_group *sg)
+{
+#ifdef CONFIG_SCHED_SMT
+ bool local_is_smt, sg_is_smt;
+ int sg_busy_cpus;
+
+ local_is_smt = sds->local->flags & SD_SHARE_CPUCAPACITY;
+ sg_is_smt = sg->flags & SD_SHARE_CPUCAPACITY;
+
+ sg_busy_cpus = sgs->group_weight - sgs->idle_cpus;
+
+ if (!local_is_smt) {
+ /*
+ * If we are here, @dst_cpu is idle and does not have SMT
+ * siblings. Pull tasks if candidate group has two or more
+ * busy CPUs.
+ */
+ if (sg_busy_cpus >= 2) /* implies sg_is_smt */
+ return true;
+
+ /*
+ * @dst_cpu does not have SMT siblings. @sg may have SMT
+ * siblings and only one is busy. In such case, @dst_cpu
+ * can help if it has higher priority and is idle (i.e.,
+ * it has no running tasks).
+ */
+ return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
+ }
+
+ /* @dst_cpu has SMT siblings. */
+
+ if (sg_is_smt) {
+ int local_busy_cpus = sds->local->group_weight -
+ sds->local_stat.idle_cpus;
+ int busy_cpus_delta = sg_busy_cpus - local_busy_cpus;
+
+ if (busy_cpus_delta == 1)
+ return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
+
+ return false;
+ }
+
+ /*
+ * @sg does not have SMT siblings. Ensure that @sds::local does not end
+ * up with more than one busy SMT sibling and only pull tasks if there
+ * are not busy CPUs (i.e., no CPU has running tasks).
+ */
+ if (!sds->local_stat.sum_nr_running)
+ return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
+
+ return false;
+#else
+ /* Always return false so that callers deal with non-SMT cases. */
+ return false;
+#endif
+}
+
static inline bool
sched_asym(struct lb_env *env, struct sd_lb_stats *sds, struct sg_lb_stats *sgs,
struct sched_group *group)
{
+ /* Only do SMT checks if either local or candidate have SMT siblings */
+ if ((sds->local->flags & SD_SHARE_CPUCAPACITY) ||
+ (group->flags & SD_SHARE_CPUCAPACITY))
+ return asym_smt_can_pull_tasks(env->dst_cpu, sds, sgs, group);
+
return sched_asym_prefer(env->dst_cpu, group->asym_prefer_cpu);
}
@@ -9547,6 +9633,12 @@ static struct rq *find_busiest_queue(str
nr_running == 1)
continue;
+ /* Make sure we only pull tasks from a CPU of lower priority */
+ if ((env->sd->flags & SD_ASYM_PACKING) &&
+ sched_asym_prefer(i, env->dst_cpu) &&
+ nr_running == 1)
+ continue;
+
switch (env->migration_type) {
case migrate_load:
/*
^ permalink raw reply
* Re: [PATCH v2] powerpc/32: Don't use a struct based type for pte_t
From: Michael Ellerman @ 2021-09-18 3:26 UTC (permalink / raw)
To: Christophe Leroy, Benjamin Herrenschmidt, Paul Mackerras
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <c904599f33aaf6bb7ee2836a9ff8368509e0d78d.1631887042.git.christophe.leroy@csgroup.eu>
Christophe Leroy <christophe.leroy@csgroup.eu> writes:
> Long time ago we had a config item called STRICT_MM_TYPECHECKS
> to build the kernel with pte_t defined as a structure in order
> to perform additional build checks or build it with pte_t
> defined as a simple type in order to get simpler generated code.
>
> Commit 670eea924198 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
> made the struct based definition the only one, considering that the
> generated code was similar in both cases.
>
> That's right on ppc64 because the ABI is such that the content of a
> struct having a single simple type element is passed as register,
> but on ppc32 such a structure is passed via the stack like any
> structure.
>
> Simple test function:
>
> pte_t test(pte_t pte)
> {
> return pte;
> }
>
> Before this patch we get
>
> c00108ec <test>:
> c00108ec: 81 24 00 00 lwz r9,0(r4)
> c00108f0: 91 23 00 00 stw r9,0(r3)
> c00108f4: 4e 80 00 20 blr
>
> So, for PPC32, restore the simple type behaviour we got before
> commit 670eea924198, but instead of adding a config option to
> activate type check, do it when __CHECKER__ is set so that type
> checking is performed by 'sparse' and provides feedback like:
>
> arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
> arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
> arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
OK that's a good trade off.
One question below ...
> diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h
> index d11b4c61d686..c60199fc6fa6 100644
> --- a/arch/powerpc/include/asm/pgtable-types.h
> +++ b/arch/powerpc/include/asm/pgtable-types.h
> @@ -5,14 +5,26 @@
> /* PTE level */
> #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)
> typedef struct { pte_basic_t pte, pte1, pte2, pte3; } pte_t;
> -#else
> +#elif defined(__CHECKER__) || !defined(CONFIG_PPC32)
It would be nicer if this logic was in Kconfig.
eg. restore config STRICT_MM_TYPECHECKS but make it always enabled for
64-bit, and depend on CHECKER for 32-bit.
The only thing is I'm not sure if we can test __CHECKER__ in Kconfig?
cheers
^ permalink raw reply
* Re: [PATCH v2] powerpc/32: Don't use a struct based type for pte_t
From: Christophe Leroy @ 2021-09-18 8:37 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <87tuiiimwu.fsf@mpe.ellerman.id.au>
Le 18/09/2021 à 05:26, Michael Ellerman a écrit :
> Christophe Leroy <christophe.leroy@csgroup.eu> writes:
>> Long time ago we had a config item called STRICT_MM_TYPECHECKS
>> to build the kernel with pte_t defined as a structure in order
>> to perform additional build checks or build it with pte_t
>> defined as a simple type in order to get simpler generated code.
>>
>> Commit 670eea924198 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
>> made the struct based definition the only one, considering that the
>> generated code was similar in both cases.
>>
>> That's right on ppc64 because the ABI is such that the content of a
>> struct having a single simple type element is passed as register,
>> but on ppc32 such a structure is passed via the stack like any
>> structure.
>>
>> Simple test function:
>>
>> pte_t test(pte_t pte)
>> {
>> return pte;
>> }
>>
>> Before this patch we get
>>
>> c00108ec <test>:
>> c00108ec: 81 24 00 00 lwz r9,0(r4)
>> c00108f0: 91 23 00 00 stw r9,0(r3)
>> c00108f4: 4e 80 00 20 blr
>>
>> So, for PPC32, restore the simple type behaviour we got before
>> commit 670eea924198, but instead of adding a config option to
>> activate type check, do it when __CHECKER__ is set so that type
>> checking is performed by 'sparse' and provides feedback like:
>>
>> arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
>> arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
>> arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
>
> OK that's a good trade off.
>
> One question below ...
>
>> diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h
>> index d11b4c61d686..c60199fc6fa6 100644
>> --- a/arch/powerpc/include/asm/pgtable-types.h
>> +++ b/arch/powerpc/include/asm/pgtable-types.h
>> @@ -5,14 +5,26 @@
>> /* PTE level */
>> #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)
>> typedef struct { pte_basic_t pte, pte1, pte2, pte3; } pte_t;
>> -#else
>> +#elif defined(__CHECKER__) || !defined(CONFIG_PPC32)
>
> It would be nicer if this logic was in Kconfig.
>
> eg. restore config STRICT_MM_TYPECHECKS but make it always enabled for
> 64-bit, and depend on CHECKER for 32-bit.
>
> The only thing is I'm not sure if we can test __CHECKER__ in Kconfig?
I think Kconfig doesn't see __CHECKER__, otherwise it would mean that a
build may get different whether you build with C=1/2 or not.
__CHECKER__ is a define added by sparse when doing the CHECK on a per
object basis.
What I can do is to add:
#if defined(__CHECKER__) || !defined(CONFIG_PPC32)
#define STRICT_MM_TYPECHECKS
#endif
Christophe
^ permalink raw reply
* Re: [PATCH v2] powerpc/32: Don't use a struct based type for pte_t
From: Christophe Leroy @ 2021-09-18 8:47 UTC (permalink / raw)
To: David Laight, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
In-Reply-To: <505920070e5f4bf8ad7ccaa12f346469@AcuMS.aculab.com>
Le 17/09/2021 à 16:32, David Laight a écrit :
> From: Christophe Leroy
>> Sent: 17 September 2021 14:58
>>
>> Long time ago we had a config item called STRICT_MM_TYPECHECKS
>> to build the kernel with pte_t defined as a structure in order
>> to perform additional build checks or build it with pte_t
>> defined as a simple type in order to get simpler generated code.
>>
> ...
>> diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h
>> index d11b4c61d686..c60199fc6fa6 100644
>> --- a/arch/powerpc/include/asm/pgtable-types.h
>> +++ b/arch/powerpc/include/asm/pgtable-types.h
>> @@ -5,14 +5,26 @@
>> /* PTE level */
>> #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)
>> typedef struct { pte_basic_t pte, pte1, pte2, pte3; } pte_t;
>> -#else
>> +#elif defined(__CHECKER__) || !defined(CONFIG_PPC32)
>> typedef struct { pte_basic_t pte; } pte_t;
>> +#else
>> +typedef pte_basic_t pte_t;
>> #endif
>> +
>> +#if defined(__CHECKER__) || !defined(CONFIG_PPC32) || \
>> + (defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES))
>> #define __pte(x) ((pte_t) { (x) })
>> static inline pte_basic_t pte_val(pte_t x)
>> {
>> return x.pte;
>> }
>> +#else
>> +#define __pte(x) ((pte_t)(x))
>> +static inline pte_basic_t pte_val(pte_t x)
>> +{
>> + return x;
>> +}
>> +#endif
>
> Would it be better to define:
> static inline pte_basic_*pte_basic(pte_t *x)
> {
> #if xxx
> return x;
> #else
> return &x->pte;
> #endif
> }
>
> Then pte_val(x) is always *pt_basic(x)
> and the casts like:
>
>> - pte_basic_t *entry = &ptep->pte;
>> + pte_basic_t *entry = (pte_basic_t *)ptep;
>
> can go away.
>
I don't like that idea too much, because it means going through a
pointer of something which is not in memory at the begining. Doing that
forces GCC to put the pte_t object on stack. And that's exactly the
purpose of this patch: avoid having to go via memory. Allthough recent
versions of GCC optimise it away at the end, I don't like it in principle.
And the only two places (pte_update() and set_huge_pte_at() where this
cast is required are really two places very special which deal with real
page tables. So IMHO it makes sense to explicitely show that what we use
is the address of the entry in the page table.
Christophe
^ permalink raw reply
* [PATCH] powerpc/476: Fix sparse report
From: Christophe Leroy @ 2021-09-18 9:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: Alistair Popple, linuxppc-dev, linux-kernel, kernel test robot
arch/powerpc/platforms/44x/ppc476.c:236:17: warning: cast removes address space '__iomem' of expression
arch/powerpc/platforms/44x/ppc476.c:241:34: warning: incorrect type in argument 1 (different address spaces)
arch/powerpc/platforms/44x/ppc476.c:241:34: expected void const volatile [noderef] __iomem *addr
arch/powerpc/platforms/44x/ppc476.c:241:34: got unsigned char [usertype] *
arch/powerpc/platforms/44x/ppc476.c:243:17: warning: incorrect type in argument 1 (different address spaces)
arch/powerpc/platforms/44x/ppc476.c:243:17: expected void volatile [noderef] __iomem *addr
arch/powerpc/platforms/44x/ppc476.c:243:17: got unsigned char [usertype] *[assigned] fpga
Mark 'fpga' pointer as __iomem.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ab9a4183fddf ("powerpc: Update currituck pci/usb fixup for new board revision")
Cc: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/platforms/44x/ppc476.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
index 07f7e3ce67b5..fb7db5cedd4e 100644
--- a/arch/powerpc/platforms/44x/ppc476.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -219,7 +219,7 @@ static int board_rev = -1;
static int __init ppc47x_get_board_rev(void)
{
int reg;
- u8 *fpga;
+ u8 __iomem *fpga;
struct device_node *np = NULL;
if (of_machine_is_compatible("ibm,currituck")) {
@@ -233,7 +233,7 @@ static int __init ppc47x_get_board_rev(void)
if (!np)
goto fail;
- fpga = (u8 *) of_iomap(np, 0);
+ fpga = of_iomap(np, 0);
of_node_put(np);
if (!fpga)
goto fail;
--
2.31.1
^ permalink raw reply related
* Re: [PATCH v5 6/6] sched/fair: Consider SMT in ASYM_PACKING load balance
From: Vincent Guittot @ 2021-09-18 9:33 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Juri Lelli, Aubrey Li, Srikar Dronamraju, Ravi V. Shankar,
Ricardo Neri, Ben Segall, Srinivas Pandruvada,
Joel Fernandes (Google), Ingo Molnar, Rafael J . Wysocki,
Steven Rostedt, Mel Gorman, Len Brown, Ricardo Neri,
Nicholas Piggin, Aubrey Li, Dietmar Eggemann, Tim Chen,
Quentin Perret, linuxppc-dev, linux-kernel,
Daniel Bristot de Oliveira
In-Reply-To: <20210917184659.GI4323@worktop.programming.kicks-ass.net>
On Fri, 17 Sept 2021 at 20:47, Peter Zijlstra <peterz@infradead.org> wrote:
>
> On Fri, Sep 17, 2021 at 05:25:02PM +0200, Vincent Guittot wrote:
>
> > With the removal of the condition !sds->local_stat.sum_nr_running
> > which seems useless because dst_cpu is idle and not SMT, this patch
> > looks good to me
>
> I've made it look like this. Thanks!
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Thanks
>
> ---
> Subject: sched/fair: Consider SMT in ASYM_PACKING load balance
> From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
> Date: Fri, 10 Sep 2021 18:18:19 -0700
>
> From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
>
> When deciding to pull tasks in ASYM_PACKING, it is necessary not only to
> check for the idle state of the destination CPU, dst_cpu, but also of
> its SMT siblings.
>
> If dst_cpu is idle but its SMT siblings are busy, performance suffers
> if it pulls tasks from a medium priority CPU that does not have SMT
> siblings.
>
> Implement asym_smt_can_pull_tasks() to inspect the state of the SMT
> siblings of both dst_cpu and the CPUs in the candidate busiest group.
>
> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> Reviewed-by: Len Brown <len.brown@intel.com>
> Link: https://lkml.kernel.org/r/20210911011819.12184-7-ricardo.neri-calderon@linux.intel.com
> ---
> kernel/sched/fair.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -8538,10 +8538,96 @@ group_type group_classify(unsigned int i
> return group_has_spare;
> }
>
> +/**
> + * asym_smt_can_pull_tasks - Check whether the load balancing CPU can pull tasks
> + * @dst_cpu: Destination CPU of the load balancing
> + * @sds: Load-balancing data with statistics of the local group
> + * @sgs: Load-balancing statistics of the candidate busiest group
> + * @sg: The candidate busiest group
> + *
> + * Check the state of the SMT siblings of both @sds::local and @sg and decide
> + * if @dst_cpu can pull tasks.
> + *
> + * If @dst_cpu does not have SMT siblings, it can pull tasks if two or more of
> + * the SMT siblings of @sg are busy. If only one CPU in @sg is busy, pull tasks
> + * only if @dst_cpu has higher priority.
> + *
> + * If both @dst_cpu and @sg have SMT siblings, and @sg has exactly one more
> + * busy CPU than @sds::local, let @dst_cpu pull tasks if it has higher priority.
> + * Bigger imbalances in the number of busy CPUs will be dealt with in
> + * update_sd_pick_busiest().
> + *
> + * If @sg does not have SMT siblings, only pull tasks if all of the SMT siblings
> + * of @dst_cpu are idle and @sg has lower priority.
> + */
> +static bool asym_smt_can_pull_tasks(int dst_cpu, struct sd_lb_stats *sds,
> + struct sg_lb_stats *sgs,
> + struct sched_group *sg)
> +{
> +#ifdef CONFIG_SCHED_SMT
> + bool local_is_smt, sg_is_smt;
> + int sg_busy_cpus;
> +
> + local_is_smt = sds->local->flags & SD_SHARE_CPUCAPACITY;
> + sg_is_smt = sg->flags & SD_SHARE_CPUCAPACITY;
> +
> + sg_busy_cpus = sgs->group_weight - sgs->idle_cpus;
> +
> + if (!local_is_smt) {
> + /*
> + * If we are here, @dst_cpu is idle and does not have SMT
> + * siblings. Pull tasks if candidate group has two or more
> + * busy CPUs.
> + */
> + if (sg_busy_cpus >= 2) /* implies sg_is_smt */
> + return true;
> +
> + /*
> + * @dst_cpu does not have SMT siblings. @sg may have SMT
> + * siblings and only one is busy. In such case, @dst_cpu
> + * can help if it has higher priority and is idle (i.e.,
> + * it has no running tasks).
> + */
> + return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
> + }
> +
> + /* @dst_cpu has SMT siblings. */
> +
> + if (sg_is_smt) {
> + int local_busy_cpus = sds->local->group_weight -
> + sds->local_stat.idle_cpus;
> + int busy_cpus_delta = sg_busy_cpus - local_busy_cpus;
> +
> + if (busy_cpus_delta == 1)
> + return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
> +
> + return false;
> + }
> +
> + /*
> + * @sg does not have SMT siblings. Ensure that @sds::local does not end
> + * up with more than one busy SMT sibling and only pull tasks if there
> + * are not busy CPUs (i.e., no CPU has running tasks).
> + */
> + if (!sds->local_stat.sum_nr_running)
> + return sched_asym_prefer(dst_cpu, sg->asym_prefer_cpu);
> +
> + return false;
> +#else
> + /* Always return false so that callers deal with non-SMT cases. */
> + return false;
> +#endif
> +}
> +
> static inline bool
> sched_asym(struct lb_env *env, struct sd_lb_stats *sds, struct sg_lb_stats *sgs,
> struct sched_group *group)
> {
> + /* Only do SMT checks if either local or candidate have SMT siblings */
> + if ((sds->local->flags & SD_SHARE_CPUCAPACITY) ||
> + (group->flags & SD_SHARE_CPUCAPACITY))
> + return asym_smt_can_pull_tasks(env->dst_cpu, sds, sgs, group);
> +
> return sched_asym_prefer(env->dst_cpu, group->asym_prefer_cpu);
> }
>
> @@ -9547,6 +9633,12 @@ static struct rq *find_busiest_queue(str
> nr_running == 1)
> continue;
>
> + /* Make sure we only pull tasks from a CPU of lower priority */
> + if ((env->sd->flags & SD_ASYM_PACKING) &&
> + sched_asym_prefer(i, env->dst_cpu) &&
> + nr_running == 1)
> + continue;
> +
> switch (env->migration_type) {
> case migrate_load:
> /*
^ permalink raw reply
* Re: [PATCH v8 2/3] tty: hvc: pass DMA capable memory to put_chars()
From: Xianting Tian @ 2021-09-18 12:32 UTC (permalink / raw)
To: Daniel Axtens, gregkh, jirislaby, amit, arnd, osandov
Cc: shile.zhang, linuxppc-dev, linux-kernel, virtualization
In-Reply-To: <6e36640d-b55f-ece4-4cab-437ecec0964a@linux.alibaba.com>
hi
Will you consider to continue the disscussion of this patch? thanks
在 2021/8/20 下午4:43, Xianting TIan 写道:
>
> 在 2021/8/20 下午2:49, Daniel Axtens 写道:
>> Xianting Tian <xianting.tian@linux.alibaba.com> writes:
>>
>>> As well known, hvc backend driver(eg, virtio-console) can register its
>>> operations to hvc framework. The operations can contain put_chars(),
>>> get_chars() and so on.
>>>
>>> Some hvc backend may do dma in its operations. eg, put_chars() of
>>> virtio-console. But in the code of hvc framework, it may pass DMA
>>> incapable memory to put_chars() under a specific configuration, which
>>> is explained in commit c4baad5029(virtio-console: avoid DMA from
>>> stack):
>> We could also run into issues on powerpc where Andrew is working on
>> adding vmap-stack but the opal hvc driver assumes that it is passed a
>> buffer which is not in vmalloc space but in the linear mapping. So it
>> would be good to fix this (or more clearly document what drivers can
>> expect).
>>
>>> 1, c[] is on stack,
>>> hvc_console_print():
>>> char c[N_OUTBUF] __ALIGNED__;
>>> cons_ops[index]->put_chars(vtermnos[index], c, i);
>>> 2, ch is on stack,
>>> static void hvc_poll_put_char(,,char ch)
>>> {
>>> struct tty_struct *tty = driver->ttys[0];
>>> struct hvc_struct *hp = tty->driver_data;
>>> int n;
>>>
>>> do {
>>> n = hp->ops->put_chars(hp->vtermno, &ch, 1);
>>> } while (n <= 0);
>>> }
>>>
>>> Commit c4baad5029 is just the fix to avoid DMA from stack memory, which
>>> is passed to virtio-console by hvc framework in above code. But I think
>>> the fix is aggressive, it directly uses kmemdup() to alloc new buffer
>>> from kmalloc area and do memcpy no matter the memory is in kmalloc area
>>> or not. But most importantly, it should better be fixed in the hvc
>>> framework, by changing it to never pass stack memory to the put_chars()
>>> function in the first place. Otherwise, we still face the same issue if
>>> a new hvc backend using dma added in the future.
>>>
>>> In this patch, we make 'char out_buf[N_OUTBUF]' and 'chat out_ch' part
>>> of 'struct hvc_struct', so both two buf are no longer the stack memory.
>>> we can use it in above two cases separately.
>>>
>>> Introduce another array(cons_outbufs[]) for buffer pointers next to
>>> the cons_ops[] and vtermnos[] arrays. With the array, we can easily
>>> find
>>> the buffer, instead of traversing hp list.
>>>
>>> With the patch, we can remove the fix c4baad5029.
>>>
>>> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
>>> Reviewed-by: Shile Zhang <shile.zhang@linux.alibaba.com>
>>> struct hvc_struct {
>>> struct tty_port port;
>>> spinlock_t lock;
>>> int index;
>>> int do_wakeup;
>>> - char *outbuf;
>>> - int outbuf_size;
>>> int n_outbuf;
>>> uint32_t vtermno;
>>> const struct hv_ops *ops;
>>> @@ -48,6 +56,10 @@ struct hvc_struct {
>>> struct work_struct tty_resize;
>>> struct list_head next;
>>> unsigned long flags;
>>> + char out_ch;
>>> + char out_buf[N_OUTBUF] __ALIGNED__;
>>> + int outbuf_size;
>>> + char outbuf[0] __ALIGNED__;
>> I'm trying to understand this patch but I am finding it very difficult
>> to understand what the difference between `out_buf` and `outbuf`
>> (without the underscore) is supposed to be. `out_buf` is statically
>> sized and the size of `outbuf` is supposed to depend on the arguments to
>> hvc_alloc(), but I can't quite figure out what the roles of each one are
>> and their names are confusingly similiar!
>>
>> I looked briefly at the older revisions of the series but it didn't make
>> things much clearer.
>>
>> Could you give them clearer names?
>
> thanks for the comments,
>
> It is indeed not easy to understand by the name. I will change it to a
> proper name if we have next version patch.
>
> Jiri Slaby is worring about the performance, because we need add two
> locks to protect 'out_ch' and 'out_buf' separately, the origin
> on-stack buffer is lockless.
>
> I don't know whether this solution can be accepted, just waiting for
> Jiri's further commtents.
>
>>
>> Also, looking at Documentation/process/deprecated.rst, it looks like
>> maybe we want to use a 'flexible array member' instead:
>>
>> .. note:: If you are using struct_size() on a structure containing a
>> zero-length
>> or a one-element array as a trailing array member, please
>> refactor such
>> array usage and switch to a `flexible array member
>> <#zero-length-and-one-element-arrays>`_ instead.
>>
>> I think we want:
> thanks, we should use [], not [0].
>>
>>> + char outbuf[] __ALIGNED__;
>> Kind regards,
>> Daniel
^ permalink raw reply
* Re: [PATCH v8 2/3] tty: hvc: pass DMA capable memory to put_chars()
From: Greg KH @ 2021-09-18 12:40 UTC (permalink / raw)
To: Xianting Tian
Cc: arnd, amit, linuxppc-dev, shile.zhang, linux-kernel,
virtualization, jirislaby, osandov, Daniel Axtens
In-Reply-To: <614b778b-8486-c20f-d5ed-37cc3b92ada1@linux.alibaba.com>
On Sat, Sep 18, 2021 at 08:32:01PM +0800, Xianting Tian wrote:
> hi
>
> Will you consider to continue the disscussion of this patch? thanks
I do not see a newer version of this series.
thanks,
greg k-h
^ permalink raw reply
* Re: [PATCH v8 2/3] tty: hvc: pass DMA capable memory to put_chars()
From: Xianting Tian @ 2021-09-18 12:47 UTC (permalink / raw)
To: Greg KH
Cc: arnd, amit, linuxppc-dev, shile.zhang, linux-kernel,
virtualization, jirislaby, osandov, Daniel Axtens
In-Reply-To: <YUXeSUVQRDXzAqhf@kroah.com>
thanks Greg, I will submit v9 patch for reviewing.
Before, I was waiting for a new reply:(
在 2021/9/18 下午8:40, Greg KH 写道:
> On Sat, Sep 18, 2021 at 08:32:01PM +0800, Xianting Tian wrote:
>> hi
>>
>> Will you consider to continue the disscussion of this patch? thanks
> I do not see a newer version of this series.
>
> thanks,
>
> greg k-h
^ permalink raw reply
* [Linux PPC] Issues with NTFS read-write driver (GPL implementation by Paragon Software)
From: Christian Zigotzky @ 2021-09-18 13:10 UTC (permalink / raw)
To: Konstantin Komarov
Cc: Darren Stevens, oleksandr, dsterba, mad skateman, hch, nborisov,
aaptel, willy, ebiggers, R.T.Dickinson, andy.lavr, dan.carpenter,
kari.argillander, viro, mark, anton, linux-ntfs-dev, linuxppc-dev,
rdunlap, linux-kernel, joe, pali
[-- Attachment #1: Type: text/plain, Size: 718 bytes --]
Hello Konstantin,
Is the new driver compatible with big endian systems? (byte order)
If I format a partition with NTFS [1], then I can mount it afterwards
with the new NTFS driver. I can also create a file and access it with an
editor. But I can’t list the files on this partition because the new
driver can’t read the hidden ”.” file. After a umount of this partition,
it isn't possible
to mount it again. [2]
Please find attached the kernel config.
Further information:
https://forum.hyperion-entertainment.com/viewtopic.php?f=58&t=4713&start=50
Thanks,
Christian
[1] sudo mkfs -t ntfs /dev/sdc3
[2] wrong fs type, bad option, bad superblock on /dev/sdc3, missing
codepage or helper program ...
[-- Attachment #2: nemo-5.15-rc1.config --]
[-- Type: text/plain, Size: 139481 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 5.15.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23000
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23000
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="_A-EON_X1000_Nemo"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="X1000"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BPF_JIT is not set
# end of BPF subsystem
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_CELL_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
# CONFIG_POWER7_CPU is not set
# CONFIG_POWER8_CPU is not set
# CONFIG_POWER9_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_RADIX_MMU=y
CONFIG_PPC_RADIX_MMU_DEFAULT=y
CONFIG_PPC_HAVE_KUEP=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_HAVE_KUAP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_PKEY=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_DAWR=y
CONFIG_PGTABLE_LEVELS=4
#
# Platform support
#
# CONFIG_PPC_POWERNV is not set
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_NEMO=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
# end of PA Semi PWRficient options
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_PPC_DT_CPU_FTRS is not set
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_MPIC_BROKEN_REGREAD=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
# CONFIG_LD_HEAD_STUB_CATCH is not set
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
CONFIG_RELOCATABLE=y
# CONFIG_RELOCATABLE_TEST is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=14
CONFIG_DATA_SHIFT=12
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_PPC_PROT_SAO_LPAR is not set
# CONFIG_SCHED_SMT is not set
# CONFIG_PPC_DENORMALISATION is not set
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_PPC_MEM_KEYS=y
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_FSL_LBC is not set
# end of Bus options
CONFIG_NONSTATIC_KERNEL=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR_POSSIBLE=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_PR=m
CONFIG_KVM_XICS=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG_COMMON=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_ARCH_HAS_HUGEPD=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_LOG_SYSLOG is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=y
CONFIG_NFT_COUNTER=y
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
# CONFIG_NFT_NAT is not set
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=y
CONFIG_NFT_COMPAT=y
# CONFIG_NFT_HASH is not set
CONFIG_NFT_FIB=y
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=y
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
CONFIG_BT_MSFTEXT=y
# CONFIG_BT_AOSPEXT is not set
# CONFIG_BT_DEBUGFS is not set
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_ELECTRA_CF=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SCCB=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_NE2K_PCI=y
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PASEMI=y
CONFIG_PASEMI_MAC=y
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=y
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
# CONFIG_MT7921E is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
CONFIG_USB4_NET=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=2
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_PASEMI=y
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PASEMI=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD70528 is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_RCMM_DECODER is not set
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_SAA7134_GO7007 is not set
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_SMIPCIE=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_TTPCI_EEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CADENCE is not set
# CONFIG_VIDEO_ASPEED is not set
CONFIG_VIDEO_MUX=m
CONFIG_VIDEO_XILINX=m
# CONFIG_VIDEO_XILINX_CSI2RXSS is not set
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_DVB_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIMC is not set
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_DVB_TEST_DRIVERS is not set
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_ST_MIPID02=m
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX219 is not set
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX355=m
# CONFIG_VIDEO_OV02A10 is not set
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV5670=m
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T001=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_M5MOLS=m
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5K6AA=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5K4ECGX=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_ET8EK8=m
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
# CONFIG_VIDEO_DW9768 is not set
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# SPI helper chips
#
# end of SPI helper chips
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_FM801=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=m
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_PPC is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_GLORIOUS=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SEMITEK=y
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
#
# Flash and Torch LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_LEDS_TRIGGER_TTY is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_PASEMI=y
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_PLX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_SF_PDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# end of Android
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_KS7010 is not set
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
# CONFIG_WFX is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_ROOT is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_NX is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_VMX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=m
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_DMA_OPS_BYPASS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MEMREMAP_COMPAT_ALIGN=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENTS is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
# CONFIG_PPC_RFI_SRR_DEBUG is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_XMON_DEFAULT_RO_MODE=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_FAST_ENDIAN_SWITCH is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply
* [PATCH] KVM: PPC: Replace zero-length array with flexible array member
From: Len Baker @ 2021-09-18 14:21 UTC (permalink / raw)
To: Paul Mackerras, Michael Ellerman, Benjamin Herrenschmidt
Cc: Kees Cook, Gustavo A. R. Silva, kvm-ppc, linux-kernel, Len Baker,
linux-hardening, linuxppc-dev
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" [1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Also, make use of the struct_size() helper in kzalloc().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Len Baker <len.baker@gmx.com>
---
arch/powerpc/include/asm/kvm_host.h | 2 +-
arch/powerpc/kvm/book3s_64_vio.c | 3 +--
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 080a7feb7731..3aed653373a5 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -190,7 +190,7 @@ struct kvmppc_spapr_tce_table {
u64 size; /* window size in pages */
struct list_head iommu_tables;
struct mutex alloc_lock;
- struct page *pages[0];
+ struct page *pages[];
};
/* XICS components, defined in book3s_xics.c */
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 6365087f3160..d42b4b6d4a79 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -295,8 +295,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
return ret;
ret = -ENOMEM;
- stt = kzalloc(sizeof(*stt) + npages * sizeof(struct page *),
- GFP_KERNEL);
+ stt = kzalloc(struct_size(stt, pages, npages), GFP_KERNEL);
if (!stt)
goto fail_acct;
--
2.25.1
^ permalink raw reply related
* Re: [PATCH v1 1/2] powerpc/64s: system call rfscv workaround for TM bugs
From: Michael Ellerman @ 2021-09-19 12:20 UTC (permalink / raw)
To: linuxppc-dev, Nicholas Piggin; +Cc: Eirik Fuller, kvm-ppc
In-Reply-To: <20210908101718.118522-1-npiggin@gmail.com>
On Wed, 8 Sep 2021 20:17:17 +1000, Nicholas Piggin wrote:
> The rfscv instruction does not work correctly with the fake-suspend mode
> in POWER9, which can end up with the hypervisor restoring an incorrect
> checkpoint.
>
> Work around this by setting the _TIF_RESTOREALL flag if a system call
> returns to a transaction active state, causing rfid to be used instead
> of rfscv to return, which will do the right thing. The contents of the
> registers are irrelevant because they will be overwritten in this case
> anyway.
>
> [...]
Applied to powerpc/fixes.
[1/2] powerpc/64s: system call rfscv workaround for TM bugs
https://git.kernel.org/powerpc/c/ae7aaecc3f2f78b76ab3a8d6178610f55aadfa56
[2/2] KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
https://git.kernel.org/powerpc/c/267cdfa21385d78c794768233678756e32b39ead
cheers
^ permalink raw reply
* Re: [PATCH v3 1/2] powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
From: Michael Ellerman @ 2021-09-19 12:20 UTC (permalink / raw)
To: linuxppc-dev, Nicholas Piggin; +Cc: Eirik Fuller
In-Reply-To: <20210903125707.1601269-1-npiggin@gmail.com>
On Fri, 3 Sep 2021 22:57:06 +1000, Nicholas Piggin wrote:
> If a system call is made with a transaction active, the kernel
> immediately aborts it and returns. scv system calls disable irqs even
> earlier in their interrupt handler, and tabort_syscall does not fix this
> up.
>
> This can result in irq soft-mask state being messed up on the next
> kernel entry, and crashing at BUG_ON(arch_irq_disabled_regs(regs)) in
> the kernel exit handlers, or possibly worse.
>
> [...]
Applied to powerpc/fixes.
[1/2] powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
https://git.kernel.org/powerpc/c/b871895b148256f1721bc565d803860242755a0b
[2/2] selftests/powerpc: Add scv versions of the basic TM syscall tests
https://git.kernel.org/powerpc/c/5379ef2a60431232b9bb01c6d3580b875123d723
cheers
^ permalink raw reply
* Re: [PATCH] powerpc/xics: Set the IRQ chip data for the ICS native backend
From: Michael Ellerman @ 2021-09-19 12:20 UTC (permalink / raw)
To: linuxppc-dev, Cédric Le Goater
In-Reply-To: <20210913134056.3761960-1-clg@kaod.org>
On Mon, 13 Sep 2021 15:40:56 +0200, Cédric Le Goater wrote:
> The ICS native driver relies on the IRQ chip data to find the struct
> 'ics_native' describing the ICS controller but it was removed by commit
> 248af248a8f4 ("powerpc/xics: Rename the map handler in a check handler").
> Revert this change to fix the Microwatt SoC platform.
>
>
>
> [...]
Applied to powerpc/fixes.
[1/1] powerpc/xics: Set the IRQ chip data for the ICS native backend
https://git.kernel.org/powerpc/c/c006a06508db4841d256d82f42da392d6391f3d9
cheers
^ permalink raw reply
* Re: [PATCH v2] powerpc/mce: Fix access error in mce handler
From: Michael Ellerman @ 2021-09-19 12:20 UTC (permalink / raw)
To: linuxppc-dev, Ganesh Goudar, mpe; +Cc: mahesh, npiggin
In-Reply-To: <20210909064330.312432-1-ganeshgr@linux.ibm.com>
On Thu, 9 Sep 2021 12:13:30 +0530, Ganesh Goudar wrote:
> We queue an irq work for deferred processing of mce event
> in realmode mce handler, where translation is disabled.
> Queuing of the work may result in accessing memory outside
> RMO region, such access needs the translation to be enabled
> for an LPAR running with hash mmu else the kernel crashes.
>
> After enabling translation in mce_handle_error() we used to
> leave it enabled to avoid crashing here, but now with the
> commit 74c3354bc1d89 ("powerpc/pseries/mce: restore msr before
> returning from handler") we are restoring the MSR to disable
> translation.
>
> [...]
Applied to powerpc/fixes.
[1/1] powerpc/mce: Fix access error in mce handler
https://git.kernel.org/powerpc/c/3a1e92d0896e928ac2a5b58962d05a39afef2e23
cheers
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox