From mboxrd@z Thu Jan 1 00:00:00 1970 Mime-Version: 1.0 Message-Id: In-Reply-To: <20021011124143.A16886@suse.de> References: <20021011092019.A1374@suse.de> <20021011100935.10178@192.168.4.1> <20021011124143.A16886@suse.de> Date: Wed, 16 Oct 2002 02:04:31 -0400 To: Benjamin Herrenschmidt From: Stefan Jeglinski Subject: part deux Re: Radeon 7000 in 9500 - which slot? Cc: linuxppc-dev@lists.linuxppc.org Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Have moved the 7000 to the top slot on the 9500, 2 monitors attached. When using 2.4.20-pre9-ben0, booting into RL3 (not troubleshooting X at this point) and kernel arg video=radeon:1024x768-16@75, the console boot briefly appears to start in accelerated mode, then the monitor goes black and stays that way. However, I can tell from listening to the disks that the boot proceeds normally. Typing blindly to get the dmesg, we have: PCI: Enabling device 00:0d.0 (0086 -> 0087) radeonfb: ref_clk=2700, ref_div=12, xclk=18277 from OF radeon_get_moninfo: bios 4 scratch = 0 Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon VE QY DDR SGRAM 32 MB radeonfb: DVI port no monitor connected radeonfb: CRT port no monitor connected Am I wrong, or does it appear to think I have no monitors connected? The main monitor's power LED indicates it has sync (green), while the second monitor's power LED indicates not (yellow). FWIW, lspci -vv yields 00:0d.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5159 (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0908 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-