From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: Date: Thu, 20 Jan 2000 21:13:10 +0100 From: "Ralf HECKHAUSEN" To: "<" Cc: Subject: Re: Embedded planet 860T CLLF HELP! Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: >I just placed the latest MPC860T FEC driver on ppc.kernel.org. >This seems to work with the Embedded Planet CLLF. It is a >pretty bad hack, as the driver should really determine many >of the things in #ifdef's dynamically. > >Another thing. On the "back" side of the CLLF, at the edge >near the four switch pack, you will find an unpopulated R08. >Place a jumper wire across this, as it is the source of the >PHY link change interrupt to the Port C pin. Future CLLF boards >will have this populated. > >And another thing. This driver doesn't seem to work correctly >on the 860P version of the boards. I thought I found all 860P >differences, but I guess I missed something. I am working on it, >and if you have one of these boards, please let me know. Try to initialize PDDIR with 0x1fff instead of 0x1c58. > -- Dan Ralf ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/