From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: Date: Wed, 22 Jan 2003 17:47:57 +0100 From: "Klaus Heydeck" To: "<" Subject: Antw: Re: Lauterbach ICD In-Circuit Debugger Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: >> >> A lot of people suggest to use the Abatron BDI2000 as debug system. I used >> the Lauterbach TRACE32-ICD system with ARM processors without MMU (no >> Linux) and it works extremely well. >> The manufacturer claims it fully supports both the MMU and the Linux kernel >> (see here for more details >> http://www.lauterbach.com/cgi-bin/docloc.pl?file=rtoslinux.pdf). Can >> anybody who used it confirm this point? > >I can. You can debug the kernel and e.g. interrupts using virtual >addresses very well, you just have to specify the mapping >(e.g. for ppc map phys 0x00000000 to 0xc0000000) > >I've not looked in detail yet to debug user processes. > We are using the TRACE32-ICD (MPC8xx) with U-Boot and Kernel 2.4.4. Kernel debugging works without any problems. User space debugging is also fine - but only if you don't have to debug shared libraries :-( I think the T32 is a very good choice for kernel debugging, especially if you have experience with the GUI and don t need the documentation or online help ;-) If the problems with the shared libs are solved you have _one_ debugger for kernel and applications. Best regards, Klaus Heydeck -- Klaus Heydeck Kieback & Peter GmbH & Co KG Abt. Softwareentwicklung Tempelhofer Weg 50 12347 Berlin / Germany Tel. +49 30 60095 522 Fax. +49 30 60095 540 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/