From: syzbot <syzbot+a0c80b06ae2cb8895bc4@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [bluetooth?] KASAN: slab-use-after-free Read in hci_send_acl
Date: Fri, 25 Aug 2023 21:29:26 -0700 [thread overview]
Message-ID: <00000000000010dead0603cbe8f4@google.com> (raw)
In-Reply-To: <20230826035531.3320-1-hdanton@sina.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: use-after-free Read in hci_get_route
==================================================================
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in hci_get_route+0x1cc/0x510 net/bluetooth/hci_conn.c:1156
Read of size 8 at addr ffff888068d1c0a8 by task syz-executor.0/5857
CPU: 0 PID: 5857 Comm: syz-executor.0 Not tainted 6.5.0-rc6-next-20230818-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
check_region_inline mm/kasan/generic.c:181 [inline]
kasan_check_range+0xef/0x190 mm/kasan/generic.c:187
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
hci_get_route+0x1cc/0x510 net/bluetooth/hci_conn.c:1156
get_l2cap_conn.constprop.0+0xe9/0x6b0 net/bluetooth/6lowpan.c:968
lowpan_control_write+0x1ba/0x730 net/bluetooth/6lowpan.c:1100
full_proxy_write+0x124/0x190 fs/debugfs/file.c:236
vfs_write+0x2a4/0xe40 fs/read_write.c:582
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f728f47cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f72900ee0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f728f59bf80 RCX: 00007f728f47cae9
RDX: 000000000000001b RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f728f4c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f728f59bf80 R15: 00007ffd19482978
</TASK>
The buggy address belongs to the physical page:
page:ffffea0001a34700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x68d1c
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000000 ffffea00008a6e08 ffff8880b9842670 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x140dc0(GFP_USER|__GFP_COMP|__GFP_ZERO), pid 5393, tgid 5393 (syz-executor.0), ts 86181654329, free_ts 106465252737
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1536
prep_new_page mm/page_alloc.c:1543 [inline]
get_page_from_freelist+0x10d7/0x31b0 mm/page_alloc.c:3219
__alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4475
__alloc_pages_node include/linux/gfp.h:237 [inline]
alloc_pages_node include/linux/gfp.h:260 [inline]
__kmalloc_large_node+0x87/0x1c0 mm/slab_common.c:1145
__do_kmalloc_node mm/slab_common.c:992 [inline]
__kmalloc.cold+0xb/0xe0 mm/slab_common.c:1017
kmalloc include/linux/slab.h:604 [inline]
kzalloc include/linux/slab.h:721 [inline]
hci_alloc_dev_priv+0x1d/0x2770 net/bluetooth/hci_core.c:2467
hci_alloc_dev include/net/bluetooth/hci_core.h:1598 [inline]
__vhci_create_device+0xf7/0x800 drivers/bluetooth/hci_vhci.c:402
vhci_create_device drivers/bluetooth/hci_vhci.c:475 [inline]
vhci_get_user drivers/bluetooth/hci_vhci.c:532 [inline]
vhci_write+0x2c7/0x470 drivers/bluetooth/hci_vhci.c:612
call_write_iter include/linux/fs.h:1983 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1136 [inline]
free_unref_page_prepare+0x476/0xa40 mm/page_alloc.c:2348
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2441
bt_host_release+0x87/0xb0 net/bluetooth/hci_sysfs.c:95
device_release+0xa1/0x240 drivers/base/core.c:2484
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1f7/0x5b0 lib/kobject.c:737
put_device+0x1f/0x30 drivers/base/core.c:3731
hci_dev_put include/net/bluetooth/hci_core.h:1558 [inline]
hci_conn_timeout+0x215/0x2d0 net/bluetooth/hci_conn.c:633
process_one_work+0x887/0x15d0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8bb/0x1290 kernel/workqueue.c:2784
kthread+0x33a/0x430 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Memory state around the buggy address:
ffff888068d1bf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888068d1c000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888068d1c080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888068d1c100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888068d1c180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Tested on:
commit: 7271b2a5 Add linux-next specific files for 20230818
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
console output: https://syzkaller.appspot.com/x/log.txt?x=11425db7a80000
kernel config: https://syzkaller.appspot.com/x/.config?x=1936af09cdef7dd6
dashboard link: https://syzkaller.appspot.com/bug?extid=a0c80b06ae2cb8895bc4
compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=170c63a7a80000
next parent reply other threads:[~2023-08-26 4:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230826035531.3320-1-hdanton@sina.com>
2023-08-26 4:29 ` syzbot [this message]
[not found] <20230827014138.3473-1-hdanton@sina.com>
2023-08-27 2:44 ` [syzbot] [bluetooth?] KASAN: slab-use-after-free Read in hci_send_acl syzbot
[not found] <20230826080830.3403-1-hdanton@sina.com>
2023-08-26 9:02 ` syzbot
[not found] <20230826011201.3252-1-hdanton@sina.com>
2023-08-26 2:35 ` syzbot
[not found] <20230825111931.3182-1-hdanton@sina.com>
2023-08-25 12:56 ` syzbot
[not found] <20230824225837.3040-1-hdanton@sina.com>
2023-08-25 1:08 ` syzbot
[not found] <20230823140836.2923-1-hdanton@sina.com>
2023-08-23 14:32 ` syzbot
[not found] <20230822112701.2655-1-hdanton@sina.com>
2023-08-22 12:15 ` syzbot
2023-08-21 16:26 syzbot
2023-08-31 18:07 ` syzbot
2024-01-14 14:37 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00000000000010dead0603cbe8f4@google.com \
--to=syzbot+a0c80b06ae2cb8895bc4@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox