From: syzbot <syzbot+afcbef13b9fa6ae41f9a@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [bpf?] [net?] INFO: rcu detected stall in handle_softirqs
Date: Sat, 11 May 2024 04:34:04 -0700 [thread overview]
Message-ID: <0000000000008514bc06182c072c@google.com> (raw)
In-Reply-To: <20240511110614.2636-1-hdanton@sina.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: rcu detected stall in sys_bpf
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P5625
rcu: (detected by 1, t=10503 jiffies, g=13033, q=705 ncpus=2)
task:syz-executor.1 state:R running task stack:26928 pid:5625 tgid:5624 ppid:5443 flags:0x00004002
Call Trace:
<IRQ>
sched_show_task kernel/sched/core.c:9192 [inline]
sched_show_task+0x42e/0x650 kernel/sched/core.c:9166
rcu_print_detail_task_stall_rnp kernel/rcu/tree_stall.h:262 [inline]
print_other_cpu_stall kernel/rcu/tree_stall.h:637 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:796 [inline]
rcu_pending kernel/rcu/tree.c:3934 [inline]
rcu_sched_clock_irq+0x2613/0x3100 kernel/rcu/tree.c:2297
update_process_times+0x175/0x220 kernel/time/timer.c:2486
tick_sched_handle kernel/time/tick-sched.c:276 [inline]
tick_nohz_handler+0x376/0x530 kernel/time/tick-sched.c:297
__run_hrtimer kernel/time/hrtimer.c:1692 [inline]
__hrtimer_run_queues+0x657/0xcc0 kernel/time/hrtimer.c:1756
hrtimer_interrupt+0x31b/0x800 kernel/time/hrtimer.c:1818
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1032 [inline]
__sysvec_apic_timer_interrupt+0x10f/0x450 arch/x86/kernel/apic/apic.c:1049
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1043
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
RIP: 0010:write_comp_data+0x34/0x90 kernel/kcov.c:236
Code: 48 8b 15 7f 10 76 7e 65 8b 05 80 10 76 7e a9 00 01 ff 00 74 0f f6 c4 01 74 59 8b 82 14 16 00 00 85 c0 74 4f 8b 82 f0 15 00 00 <83> f8 03 75 44 48 8b 82 f8 15 00 00 8b 92 f4 15 00 00 48 8b 38 48
RSP: 0018:ffffc90003906fd8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff813d1d91
RDX: ffff88807d1f9e00 RSI: 0000000000000002 RDI: 0000000000000001
RBP: ffffffff8b09ce80 R08: 0000000000000001 R09: 0000000000000002
R10: 0000000000000004 R11: 000000000040004e R12: 0000000000000004
R13: 0000000000000001 R14: 0000000000000008 R15: ffffc9000390711d
__sanitizer_cov_trace_switch+0x54/0x90 kernel/kcov.c:341
unwind_next_frame+0x6c1/0x23a0 arch/x86/kernel/unwind_orc.c:515
__unwind_start+0x5aa/0x880 arch/x86/kernel/unwind_orc.c:760
unwind_start arch/x86/include/asm/unwind.h:64 [inline]
arch_stack_walk+0xb2/0x170 arch/x86/kernel/stacktrace.c:24
stack_trace_save+0x95/0xd0 kernel/stacktrace.c:122
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3851 [inline]
kmem_cache_alloc_node+0x177/0x350 mm/slub.c:3894
kmalloc_reserve+0x18b/0x2c0 net/core/skbuff.c:577
pskb_expand_head+0x240/0x11f0 net/core/skbuff.c:2251
skb_ensure_writable net/core/skbuff.c:6117 [inline]
skb_ensure_writable+0x2e7/0x450 net/core/skbuff.c:6109
__bpf_try_make_writable net/core/filter.c:1665 [inline]
bpf_try_make_writable net/core/filter.c:1671 [inline]
bpf_try_make_head_writable net/core/filter.c:1679 [inline]
____bpf_clone_redirect net/core/filter.c:2454 [inline]
bpf_clone_redirect+0x129/0x420 net/core/filter.c:2432
___bpf_prog_run+0x3e51/0xabd0 kernel/bpf/core.c:1997
__bpf_prog_run512+0xb7/0x100 kernel/bpf/core.c:2238
bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
__bpf_prog_run include/linux/filter.h:657 [inline]
bpf_prog_run include/linux/filter.h:664 [inline]
bpf_test_run+0x3e2/0x9e0 net/bpf/test_run.c:425
bpf_prog_test_run_skb+0xb17/0x1db0 net/bpf/test_run.c:1058
bpf_prog_test_run kernel/bpf/syscall.c:4269 [inline]
__sys_bpf+0xd56/0x4b40 kernel/bpf/syscall.c:5678
__do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
__x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5765
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x260 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbdb567dca9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fbdb63ad0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 00007fbdb57abf80 RCX: 00007fbdb567dca9
RDX: 0000000000000050 RSI: 0000000020000080 RDI: 000000000000000a
RBP: 00007fbdb56c947e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fbdb57abf80 R15: 00007ffd4906dd38
</TASK>
rcu: rcu_preempt kthread starved for 10536 jiffies! g13033 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:27664 pid:16 tgid:16 ppid:2 flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_timeout+0x136/0x2a0 kernel/time/timer.c:2582
rcu_gp_fqs_loop+0x1eb/0xb00 kernel/rcu/tree.c:1663
rcu_gp_kthread+0x271/0x380 kernel/rcu/tree.c:1862
kthread+0x2c1/0x3a0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
rcu: Stack dump where RCU GP kthread last ran:
CPU: 1 PID: 5625 Comm: syz-executor.1 Not tainted 6.9.0-rc7-syzkaller-00008-gee5b455b0ada-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:write_comp_data+0x34/0x90 kernel/kcov.c:236
Code: 48 8b 15 7f 10 76 7e 65 8b 05 80 10 76 7e a9 00 01 ff 00 74 0f f6 c4 01 74 59 8b 82 14 16 00 00 85 c0 74 4f 8b 82 f0 15 00 00 <83> f8 03 75 44 48 8b 82 f8 15 00 00 8b 92 f4 15 00 00 48 8b 38 48
RSP: 0018:ffffc90003906fd8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff813d1d91
RDX: ffff88807d1f9e00 RSI: 0000000000000002 RDI: 0000000000000001
RBP: ffffffff8b09ce80 R08: 0000000000000001 R09: 0000000000000002
R10: 0000000000000004 R11: 000000000040004e R12: 0000000000000004
R13: 0000000000000001 R14: 0000000000000008 R15: ffffc9000390711d
FS: 00007fbdb63ad6c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001060 CR3: 00000000272e2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
</IRQ>
<TASK>
__sanitizer_cov_trace_switch+0x54/0x90 kernel/kcov.c:341
unwind_next_frame+0x6c1/0x23a0 arch/x86/kernel/unwind_orc.c:515
__unwind_start+0x5aa/0x880 arch/x86/kernel/unwind_orc.c:760
unwind_start arch/x86/include/asm/unwind.h:64 [inline]
arch_stack_walk+0xb2/0x170 arch/x86/kernel/stacktrace.c:24
stack_trace_save+0x95/0xd0 kernel/stacktrace.c:122
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3851 [inline]
kmem_cache_alloc_node+0x177/0x350 mm/slub.c:3894
kmalloc_reserve+0x18b/0x2c0 net/core/skbuff.c:577
pskb_expand_head+0x240/0x11f0 net/core/skbuff.c:2251
skb_ensure_writable net/core/skbuff.c:6117 [inline]
skb_ensure_writable+0x2e7/0x450 net/core/skbuff.c:6109
__bpf_try_make_writable net/core/filter.c:1665 [inline]
bpf_try_make_writable net/core/filter.c:1671 [inline]
bpf_try_make_head_writable net/core/filter.c:1679 [inline]
____bpf_clone_redirect net/core/filter.c:2454 [inline]
bpf_clone_redirect+0x129/0x420 net/core/filter.c:2432
___bpf_prog_run+0x3e51/0xabd0 kernel/bpf/core.c:1997
__bpf_prog_run512+0xb7/0x100 kernel/bpf/core.c:2238
bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline]
__bpf_prog_run include/linux/filter.h:657 [inline]
bpf_prog_run include/linux/filter.h:664 [inline]
bpf_test_run+0x3e2/0x9e0 net/bpf/test_run.c:425
bpf_prog_test_run_skb+0xb17/0x1db0 net/bpf/test_run.c:1058
bpf_prog_test_run kernel/bpf/syscall.c:4269 [inline]
__sys_bpf+0xd56/0x4b40 kernel/bpf/syscall.c:5678
__do_sys_bpf kernel/bpf/syscall.c:5767 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5765 [inline]
__x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5765
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x260 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbdb567dca9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fbdb63ad0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 00007fbdb57abf80 RCX: 00007fbdb567dca9
RDX: 0000000000000050 RSI: 0000000020000080 RDI: 000000000000000a
RBP: 00007fbdb56c947e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fbdb57abf80 R15: 00007ffd4906dd38
</TASK>
Tested on:
commit: ee5b455b Merge tag 'slab-for-6.9-rc7-fixes' of git://g..
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
console output: https://syzkaller.appspot.com/x/log.txt?x=1628ac00980000
kernel config: https://syzkaller.appspot.com/x/.config?x=7144b4fe7fbf5900
dashboard link: https://syzkaller.appspot.com/bug?extid=afcbef13b9fa6ae41f9a
compiler: gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
patch: https://syzkaller.appspot.com/x/patch.diff?x=132d583f180000
next prev parent reply other threads:[~2024-05-11 11:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-11 7:31 [syzbot] [bpf?] [net?] INFO: rcu detected stall in handle_softirqs syzbot
2024-05-11 11:06 ` Hillf Danton
2024-05-11 11:34 ` syzbot [this message]
2025-01-07 14:37 ` [syzbot] " syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0000000000008514bc06182c072c@google.com \
--to=syzbot+afcbef13b9fa6ae41f9a@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox