From: syzbot <syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com>
To: gregkh@linuxfoundation.org, jirislaby@kernel.org,
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com
Subject: [syzbot] BUG: unable to handle kernel NULL pointer dereference in gsmld_receive_buf
Date: Mon, 08 Aug 2022 00:54:22 -0700 [thread overview]
Message-ID: <000000000000b7352e05e5b61f84@google.com> (raw)
Hello,
syzbot found the following issue on:
HEAD commit: ca688bff68bc Add linux-next specific files for 20220808
git tree: linux-next
console output: https://syzkaller.appspot.com/x/log.txt?x=1562df51080000
kernel config: https://syzkaller.appspot.com/x/.config?x=4c20e006003cdecb
dashboard link: https://syzkaller.appspot.com/bug?extid=e3563f0c94e188366dbb
compiler: gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
Unfortunately, I don't have any reproducer for this issue yet.
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 7b32a067 P4D 7b32a067 PUD 7e135067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 4273 Comm: syz-executor.0 Not tainted 5.19.0-next-20220808-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffffc9000c3a7cf0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff888041a85000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000000007d RDI: ffff888041a85000
RBP: ffffc9000c3a7da1 R08: 0000000000000001 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: ffffc9000c3a7d90 R15: dffffc0000000000
FS: 00007f58156b4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000025ca1000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861
tiocsti drivers/tty/tty_io.c:2293 [inline]
tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5814489279
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f58156b4168 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f581459bf80 RCX: 00007f5814489279
RDX: 0000000020000280 RSI: 0000000000005412 RDI: 0000000000000003
RBP: 00007f58144e3189 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd1f199d5f R14: 00007f58156b4300 R15: 0000000000022000
</TASK>
Modules linked in:
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffffc9000c3a7cf0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff888041a85000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000000007d RDI: ffff888041a85000
RBP: ffffc9000c3a7da1 R08: 0000000000000001 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: ffffc9000c3a7d90 R15: dffffc0000000000
FS: 00007f58156b4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000025ca1000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
next reply other threads:[~2022-08-08 7:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-08 7:54 syzbot [this message]
2022-08-08 13:05 ` [syzbot] BUG: unable to handle kernel NULL pointer dereference in gsmld_receive_buf syzbot
2022-08-09 12:47 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=000000000000b7352e05e5b61f84@google.com \
--to=syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox