From: "Chaithrika U S" <chaithrika@ti.com>
To: "'Kevin Hilman'" <khilman@deeprootsystems.com>,
"'Janakiram Sistla'" <janakiram.sistla@gmail.com>
Cc: <linux-kernel@vger.kernel.org>, <akpm@linux-foundation.org>,
<davinci-linux-open-source@linux.davincidsp.com>
Subject: RE: [PATCH 2/2] davinci: MMC: updates to suspend/resume implementation
Date: Wed, 6 Jan 2010 10:23:22 +0530 [thread overview]
Message-ID: <000001ca8e8c$2c82dda0$858898e0$@com> (raw)
In-Reply-To: <87y6kcp0q6.fsf@deeprootsystems.com>
On Wed, Jan 06, 2010 at 05:23:53, Kevin Hilman wrote:
> Janakiram Sistla <janakiram.sistla@gmail.com> writes:
>
> > On 12/17/09, Chaithrika U S <chaithrika@ti.com> wrote:
> >> Improve the suspend and resume callbacks in DaVinci MMC
> >> host controller driver.
> >
> > [Ram] I came cross in the mailing some days back that "direct"
> > .suspend and .resume calls will stop being supported.Is This
> > true??This patch does require a migration then again.
>
> Yes, this patch (or an additional patch) will have to update the
> MMC driver to use dev_pm_ops.
>
> See this commit in Linus' tree where I converted the smc91x driver.
> Something like this will nee dto be done for this driver as well.
OK. I will submit an updated version of this patch soon.
Regards,
Chaithrika
>
> Kevin
>
> commit 9f950f72e57fe4bf9b16ace67e4cc5ffcee79d00
> Author: Kevin Hilman <khilman@deeprootsystems.com>
> Date: Tue Nov 24 12:57:47 2009 +0000
>
> NET: smc91x: convert to dev_pm_ops
>
> Convert smc91x driver from legacy PM hooks over to using dev_pm_ops.
>
> Tested on OMAP3 platform.
>
> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> Acked-by: Nicolas Pitre <nico@fluxnic.net>
> Signed-off-by: David S. Miller <davem@davemloft.net>
>
> >> Tested on DA850/OMAP-L138 EVM. This testing requires patches
> >> which add suspend-to-RAM support to DA850/OMAP-L138 SoC[1].
> >>
> >> [1]http://linux.davincidsp.com/pipermail/davinci-linux-open-source/
> >> 2009-September/016118.html
> >>
> >> Signed-off-by: Chaithrika U S <chaithrika@ti.com>
> >> ---
> >> Applies to Linus' kernel tree.
> >>
> >> drivers/mmc/host/davinci_mmc.c | 31 +++++++++++++++++++++++++++++--
> >> 1 files changed, 29 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
> >> index 25645bf..7d05cc1 100644
> >> --- a/drivers/mmc/host/davinci_mmc.c
> >> +++ b/drivers/mmc/host/davinci_mmc.c
> >> @@ -170,6 +170,7 @@ struct mmc_davinci_host {
> >> #define DAVINCI_MMC_DATADIR_READ 1
> >> #define DAVINCI_MMC_DATADIR_WRITE 2
> >> unsigned char data_dir;
> >> + unsigned char suspended;
> >>
> >> /* buffer is used during PIO of one scatterlist segment, and
> >> * is updated along with buffer_bytes_left. bytes_left applies
> >> @@ -1300,15 +1301,41 @@ static int __exit davinci_mmcsd_remove(struct platform_device *pdev)
> >> static int davinci_mmcsd_suspend(struct platform_device *pdev, pm_message_t msg)
> >> {
> >> struct mmc_davinci_host *host = platform_get_drvdata(pdev);
> >> + int ret;
> >>
> >> - return mmc_suspend_host(host->mmc, msg);
> >> + mmc_host_enable(host->mmc);
> >> + ret = mmc_suspend_host(host->mmc, msg);
> >> + if (!ret) {
> >> + writel(0, host->base + DAVINCI_MMCIM);
> >> + mmc_davinci_reset_ctrl(host, 1);
> >> + mmc_host_disable(host->mmc);
> >> + clk_disable(host->clk);
> >> + host->suspended = 1;
> >> + } else {
> >> + host->suspended = 0;
> >> + mmc_host_disable(host->mmc);
> >> + }
> >> +
> >> + return ret;
> >> }
> >>
> >> static int davinci_mmcsd_resume(struct platform_device *pdev)
> >> {
> >> struct mmc_davinci_host *host = platform_get_drvdata(pdev);
> >> + int ret;
> >>
> >> - return mmc_resume_host(host->mmc);
> >> + if (!host->suspended)
> >> + return 0;
> >> +
> >> + clk_enable(host->clk);
> >> + mmc_host_enable(host->mmc);
> >> +
> >> + mmc_davinci_reset_ctrl(host, 0);
> >> + ret = mmc_resume_host(host->mmc);
> >> + if (!ret)
> >> + host->suspended = 0;
> >> +
> >> + return ret;
> >> }
> >> #else
> >> #define davinci_mmcsd_suspend NULL
> >> --
> >> 1.5.6
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> Please read the FAQ at http://www.tux.org/lkml/
> >>
>
next prev parent reply other threads:[~2010-01-06 4:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-17 12:15 [PATCH 2/2] davinci: MMC: updates to suspend/resume implementation Chaithrika U S
2009-12-18 11:03 ` Janakiram Sistla
2010-01-05 23:53 ` Kevin Hilman
2010-01-06 4:53 ` Chaithrika U S [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-03-16 20:30 [PATCH 1/2] davinci: MMC: Add a function to control reset state of the controller Kevin Hilman
2010-03-16 20:30 ` [PATCH 2/2] davinci: MMC: updates to suspend/resume implementation Kevin Hilman
2010-03-22 19:43 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000001ca8e8c$2c82dda0$858898e0$@com' \
--to=chaithrika@ti.com \
--cc=akpm@linux-foundation.org \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=janakiram.sistla@gmail.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox