public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jingoo Han <jg1.han@samsung.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
	"'Alessandro Zummo'" <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, "'Jingoo Han'" <jg1.han@samsung.com>,
	shuah.kh@samsung.com, shuahkhan@gmail.com,
	Jingoo Han <jg1.han@samsung.com>
Subject: [PATCH V2] drivers/rtc/class: convert from Legacy pm ops to dev_pm_ops
Date: Fri, 07 Jun 2013 11:27:46 +0900	[thread overview]
Message-ID: <000301ce6326$98df9660$ca9ec320$@samsung.com> (raw)

From: Shuah Khan <shuah.kh@samsung.com>

Convert drivers/rtc/class to use dev_pm_ops for power management and
remove Legacy PM ops hooks.  With this change, rtc class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume.  When __device_suspend() runs call-backs, it will
find class->pm ops for the rtc class.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
---
Changes since v1:
- Added 'RTC_CLASS_DEV_PM_OPS' to fix buill errors.
- Replaced '#if defined(CONFIG_PM)' with '#if defined(CONFIG_PM_SLEEP)'.

 drivers/rtc/class.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 6638540..0242681 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -38,7 +38,7 @@ static void rtc_device_release(struct device *dev)
 int rtc_hctosys_ret = -ENODEV;
 #endif
 
-#if defined(CONFIG_PM) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
+#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
 /*
  * On suspend(), measure the delta between one RTC and the
  * system's wall clock; restore it on resume().
@@ -47,7 +47,7 @@ int rtc_hctosys_ret = -ENODEV;
 static struct timespec old_rtc, old_system, old_delta;
 
 
-static int rtc_suspend(struct device *dev, pm_message_t mesg)
+static int rtc_suspend(struct device *dev)
 {
 	struct rtc_device	*rtc = to_rtc_device(dev);
 	struct rtc_time		tm;
@@ -135,9 +135,10 @@ static int rtc_resume(struct device *dev)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(rtc_class_dev_pm_ops, rtc_suspend, rtc_resume);
+#define RTC_CLASS_DEV_PM_OPS	(&rtc_class_dev_pm_ops)
 #else
-#define rtc_suspend	NULL
-#define rtc_resume	NULL
+#define RTC_CLASS_DEV_PM_OPS	NULL
 #endif
 
 
@@ -336,8 +337,7 @@ static int __init rtc_init(void)
 		pr_err("couldn't create class\n");
 		return PTR_ERR(rtc_class);
 	}
-	rtc_class->suspend = rtc_suspend;
-	rtc_class->resume = rtc_resume;
+	rtc_class->pm = RTC_CLASS_DEV_PM_OPS;
 	rtc_dev_init();
 	rtc_sysfs_init(rtc_class);
 	return 0;
-- 
1.7.10.4



             reply	other threads:[~2013-06-07  2:27 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-07  2:27 Jingoo Han [this message]
2013-06-10 15:35 ` [PATCH V2] drivers/rtc/class: convert from Legacy pm ops to dev_pm_ops Shuah Khan
  -- strict thread matches above, loose matches on Subject: below --
2013-05-31 17:08 [PATCH v2] drivers/rtc/class: Convert " Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='000301ce6326$98df9660$ca9ec320$@samsung.com' \
    --to=jg1.han@samsung.com \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=shuah.kh@samsung.com \
    --cc=shuahkhan@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox