[PATCH RESEND 2/2] watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_ops

[PATCH RESEND 2/2] watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_ops

[Jingoo Han]

Instead of using legacy suspend/resume methods, using newer
dev_pm_ops structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c |   18 ++++++++----------
 1 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index c9f480d..d15fbe3 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -439,12 +439,12 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
 	s3c2410wdt_stop(&s3c2410_wdd);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 
 static unsigned long wtcon_save;
 static unsigned long wtdat_save;
 
-static int s3c2410wdt_suspend(struct platform_device *dev, pm_message_t state)
+static int s3c2410wdt_suspend(struct device *dev)
 {
 	/* Save watchdog state, and turn it off. */
 	wtcon_save = readl(wdt_base + S3C2410_WTCON);
@@ -456,7 +456,7 @@ static int s3c2410wdt_suspend(struct platform_device *dev, pm_message_t state)
 	return 0;
 }
 
-static int s3c2410wdt_resume(struct platform_device *dev)
+static int s3c2410wdt_resume(struct device *dev)
 {
 	/* Restore watchdog state. */
 
@@ -464,16 +464,15 @@ static int s3c2410wdt_resume(struct platform_device *dev)
 	writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
 	writel(wtcon_save, wdt_base + S3C2410_WTCON);
 
-	dev_info(&dev->dev, "watchdog %sabled\n",
+	dev_info(dev, "watchdog %sabled\n",
 		(wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
 
 	return 0;
 }
+#endif
 
-#else
-#define s3c2410wdt_suspend NULL
-#define s3c2410wdt_resume  NULL
-#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
+			s3c2410wdt_resume);
 
 #ifdef CONFIG_OF
 static const struct of_device_id s3c2410_wdt_match[] = {
@@ -487,11 +486,10 @@ static struct platform_driver s3c2410wdt_driver = {
 	.probe		= s3c2410wdt_probe,
 	.remove		= s3c2410wdt_remove,
 	.shutdown	= s3c2410wdt_shutdown,
-	.suspend	= s3c2410wdt_suspend,
-	.resume		= s3c2410wdt_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "s3c2410-wdt",
+		.pm	= &s3c2410wdt_pm_ops,
 		.of_match_table	= of_match_ptr(s3c2410_wdt_match),
 	},
 };
-- 
1.7.2.5

Re: [PATCH RESEND 2/2] watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_ops

[Guenter Roeck]

On Mon, Apr 29, 2013 at 06:26:41PM +0900, Jingoo Han wrote:
> Instead of using legacy suspend/resume methods, using newer
> dev_pm_ops structure allows better control over power management.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>